1 files changed, 151 insertions, 0 deletions
diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S
new file mode 100644
index 000000000..992e78450
--- /dev/null
+++ b/arch/arm/boot/compressed/head-sharpsl.S
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * linux/arch/arm/boot/compressed/head-sharpsl.S
+ *
+ * Copyright (C) 2004-2005 Richard Purdie <rpurdie@rpsys.net>
+ *
+ * Sharp's bootloader doesn't pass any kind of machine ID
+ * so we have to figure out the machine for ourselves...
+ *
+ * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
+ * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000),
+ * Akita (SL-C1000) and Borzoi (SL-C3100).
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+#ifndef CONFIG_PXA_SHARPSL
+#error What am I doing here...
+#endif
+
+		.section        ".start", "ax"
+
+__SharpSL_start:
+
+/* Check for TC6393 - if found we have a Tosa */
+	ldr	r7, .TOSAID
+	mov	r1, #0x10000000		@ Base address of TC6393 chip
+	mov 	r6, #0x03
+	ldrh	r3, [r1, #8]		@ Load TC6393XB Revison: This is 0x0003
+	cmp	r6, r3
+	beq	.SHARPEND		@ Success -> tosa
+
+/* Check for pxa270 - if found, branch */
+	mrc p15, 0, r4, c0, c0		@ Get Processor ID
+	and	r4, r4, #0xffffff00
+	ldr	r3, .PXA270ID
+	cmp	r4, r3
+	beq	.PXA270
+
+/* Check for w100 - if not found we have a Poodle */
+	ldr	r1, .W100ADDR		@ Base address of w100 chip + regs offset
+
+	mov r6, #0x31			@ Load Magic Init value
+	str	r6, [r1, #0x280]	@ to SCRATCH_UMSK
+	mov r5, #0x3000
+.W100LOOP:
+	subs r5, r5, #1
+	bne .W100LOOP
+	mov r6, #0x30			@ Load 2nd Magic Init value
+	str	r6, [r1, #0x280]	@ to SCRATCH_UMSK
+
+	ldr	r6, [r1, #0]		@ Load Chip ID
+	ldr	r3, .W100ID
+	ldr	r7, .POODLEID
+	cmp	r6, r3
+	bne	.SHARPEND			@ We have no w100 - Poodle
+
+/* Check for pxa250 - if found we have a Corgi */
+	ldr	r7, .CORGIID
+	ldr	r3, .PXA255ID
+	cmp	r4, r3
+	blo	.SHARPEND			@ We have a PXA250 - Corgi
+
+/* Check for 64MiB flash - if found we have a Shepherd */
+	bl	get_flash_ids
+	ldr	r7, .SHEPHERDID
+	cmp	r3, #0x76			@ 64MiB flash
+	beq	.SHARPEND			@ We have Shepherd
+
+/* Must be a Husky */
+	ldr	r7, .HUSKYID		@ Must be Husky
+	b .SHARPEND
+
+.PXA270:
+/* Check for 16MiB flash - if found we have Spitz */
+	bl	get_flash_ids
+	ldr	r7, .SPITZID
+	cmp	r3, #0x73			@ 16MiB flash
+	beq	.SHARPEND			@ We have Spitz
+
+/* Check for a second SCOOP chip - if found we have Borzoi */
+	ldr	r1, .SCOOP2ADDR
+	ldr	r7, .BORZOIID
+	mov 	r6, #0x0140
+	strh	r6, [r1]
+	ldrh	r6, [r1]
+	cmp	r6, #0x0140
+	beq	.SHARPEND			@ We have Borzoi
+
+/* Must be Akita */
+	ldr	r7, .AKITAID
+	b	.SHARPEND			@ We have Borzoi
+
+.PXA255ID:
+	.word	0x69052d00		@ PXA255 Processor ID
+.PXA270ID:
+	.word	0x69054100		@ PXA270 Processor ID
+.W100ID:
+	.word	0x57411002		@ w100 Chip ID
+.W100ADDR:
+	.word 	0x08010000		@ w100 Chip ID Reg Address
+.SCOOP2ADDR:
+	.word	0x08800040
+.POODLEID:
+	.word	MACH_TYPE_POODLE
+.CORGIID:
+	.word	MACH_TYPE_CORGI
+.SHEPHERDID:
+	.word	MACH_TYPE_SHEPHERD
+.HUSKYID:
+	.word	MACH_TYPE_HUSKY
+.TOSAID:
+	.word	MACH_TYPE_TOSA
+.SPITZID:
+	.word	MACH_TYPE_SPITZ
+.AKITAID:
+	.word	MACH_TYPE_AKITA
+.BORZOIID:
+	.word	MACH_TYPE_BORZOI
+
+/*
+ * Return: r2 - NAND Manufacturer ID
+ *         r3 - NAND Chip ID
+ * Corrupts: r1
+ */
+get_flash_ids:
+	mov	r1, #0x0c000000		@ Base address of NAND chip
+	ldrb	r3, [r1, #24]		@ Load FLASHCTL
+	bic	r3, r3, #0x11		@ SET NCE
+	orr	r3, r3, #0x0a		@ SET CLR + FLWP
+	strb	r3, [r1, #24]		@ Save to FLASHCTL
+	mov 	r2, #0x90		@ Command "readid"
+	strb	r2, [r1, #20]		@ Save to FLASHIO
+	bic	r3, r3, #2		@ CLR CLE
+	orr	r3, r3, #4		@ SET ALE
+	strb	r3, [r1, #24]		@ Save to FLASHCTL
+	mov	r2, #0			@ Address 0x00
+	strb	r2, [r1, #20]		@ Save to FLASHIO
+	bic	r3, r3, #4		@ CLR ALE
+	strb	r3, [r1, #24]		@ Save to FLASHCTL
+.fids1:
+	ldrb	r3, [r1, #24]		@ Load FLASHCTL
+	tst	r3, #32			@ Is chip ready?
+	beq	.fids1
+	ldrb	r2, [r1, #20]		@ NAND Manufacturer ID
+	ldrb	r3, [r1, #20]		@ NAND Chip ID
+	mov	pc, lr
+
+.SHARPEND: