diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-370-db.dts')
| -rw-r--r-- | arch/arm/boot/dts/armada-370-db.dts | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts new file mode 100644 index 000000000..a7dc4c04d --- /dev/null +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada 370 evaluation board + * (DB-88F6710-BP-DDR3) + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-370.dtsi" + +/ { + model = "Marvell Armada 370 Evaluation Board"; + compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; + + internal-regs { + serial@12000 { + status = "okay"; + }; + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + i2c@11000 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <100000>; + status = "okay"; + audio_codec: audio-codec@4a { + #sound-dai-cells = <0>; + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + }; + }; + + audio-controller@30000 { + pinctrl-0 = <&i2s_pins2>; + pinctrl-names = "default"; + status = "okay"; + }; + + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + /* + * This device is disabled by default, because + * using the SD card connector requires + * changing the default CON40 connector + * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a + * different connector + * "DB-88F6710_MPP_RGMII_SD_Jumper". + */ + status = "disabled"; + /* No CD or WP GPIOs */ + broken-cd; + }; + + usb@50000 { + status = "okay"; + }; + + usb@51000 { + status = "okay"; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Armada 370 DB Audio"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Headphone", "Out Jack", + "Line", "In Jack"; + simple-audio-card,routing = + "Out Jack", "HPL", + "Out Jack", "HPR", + "AIN1L", "In Jack", + "AIN1L", "In Jack"; + status = "okay"; + + simple-audio-card,dai-link@0 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 0>; + }; + + codec { + sound-dai = <&audio_codec>; + }; + }; + + simple-audio-card,dai-link@1 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 1>; + }; + + codec { + sound-dai = <&spdif_out>; + }; + }; + + simple-audio-card,dai-link@2 { + format = "i2s"; + cpu { + sound-dai = <&audio_controller 1>; + }; + + codec { + sound-dai = <&spdif_in>; + }; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; + + spdif_in: spdif-in { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dir"; + }; +}; + +&pciec { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + + +&spi0 { + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + }; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; |