diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts')
| -rw-r--r-- | arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts | 164 |
1 files changed, 164 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts new file mode 100644 index 000000000..4d7cee569 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2015 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; +#include "at91-sama5d4_ma5d4.dtsi" + +/ { + model = "Aries/DENX MA5D4EVK"; + compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5"; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + ahb { + usb0: gadget@400000 { + atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; + }; + + usb1: ohci@500000 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioE 11 GPIO_ACTIVE_LOW + &pioE 14 GPIO_ACTIVE_LOW + >; + status = "okay"; + }; + + usb2: ehci@600000 { + status = "okay"; + }; + + apb { + hlcdc: hlcdc@f0000000 { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + }; + + macb0: ethernet@f8020000 { + phy-mode = "rmii"; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + usart0: serial@f802c000 { + status = "okay"; + }; + + usart1: serial@f8030000 { + status = "okay"; + }; + + mmc1: mmc@fc000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 5 0>; + }; + }; + + adc0: adc@fc034000 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + }; + + + pinctrl@fc06a000 { + board { + pinctrl_mmc1_cd: mmc1_cd { + atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_usba_vbus: usba_vbus { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; + }; + }; + }; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + status = "okay"; + + user1 { + label = "user1"; + gpios = <&pioD 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user2 { + label = "user2"; + gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user3 { + label = "user3"; + gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + panel: panel { + /* Actually Ampire 800480R2 */ + compatible = "foxlink,fl500wvr00-a0t"; + backlight = <&backlight>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + vcc_mmc1_reg: fixedregulator_mmc1 { + compatible = "regulator-fixed"; + gpio = <&pioE 17 GPIO_ACTIVE_LOW>; + regulator-name = "VDD MCI1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_reg>; + }; +}; |