summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/da850-evm.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/da850-evm.dts')
-rw-r--r--arch/arm/boot/dts/da850-evm.dts466
1 files changed, 466 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
new file mode 100644
index 000000000..1fdd9a249
--- /dev/null
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree for DA850 EVM board
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "ti,da850-evm", "ti,da850";
+ model = "DA850/AM1808/OMAP-L138 EVM";
+
+ chosen {
+ stdout-path = &serial2;
+ };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ ethernet0 = &eth0;
+ spi0 = &spi1;
+ };
+
+ backlight: backlight-pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap2_pins>;
+ power-supply = <&backlight_lcd>;
+ compatible = "pwm-backlight";
+ /*
+ * The PWM here corresponds to production hardware. The
+ * schematic needs to be 1015171 (15 March 2010), Rev A
+ * or newer.
+ */
+ pwms = <&ecap2 0 50000 0>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+ default-brightness-level = <7>;
+ };
+
+ panel {
+ compatible = "ti,tilcdc,panel";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins>;
+ /*
+ * The vpif and the LCD are mutually exclusive.
+ * To enable VPIF, change the status below to 'disabled' then
+ * then change the status of the vpif below to 'okay'
+ */
+ status = "okay";
+ enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
+
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 480x272 {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <3>;
+ hback-porch = <2>;
+ hsync-len = <42>;
+ vback-porch = <3>;
+ vfront-porch = <4>;
+ vsync-len = <11>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+
+ vbat: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ baseboard_3v3: fixedregulator-3v3 {
+ /* TPS73701DCQ */
+ compatible = "regulator-fixed";
+ regulator-name = "baseboard_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vbat>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ baseboard_1v8: fixedregulator-1v8 {
+ /* TPS73701DCQ */
+ compatible = "regulator-fixed";
+ regulator-name = "baseboard_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vbat>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ backlight_lcd: backlight-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_backlight_pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DA850-OMAPL138 EVM";
+ simple-audio-card,widgets =
+ "Line", "Line In",
+ "Line", "Line Out";
+ simple-audio-card,routing =
+ "LINE1L", "Line In",
+ "LINE1R", "Line In",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ system-clock-frequency = <24576000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <24576000>;
+ };
+ };
+};
+
+&ecap2 {
+ status = "okay";
+};
+
+&ref_clk {
+ clock-frequency = <24000000>;
+};
+
+&pmx_core {
+ status = "okay";
+
+ mcasp0_pins: pinmux_mcasp0_pins {
+ pinctrl-single,bits = <
+ /*
+ * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
+ * AFSR, AMUTE
+ */
+ 0x00 0x11111111 0xffffffff
+ /* AXR11, AXR12 */
+ 0x04 0x00011000 0x000ff000
+ >;
+ };
+ nand_pins: nand_pins {
+ pinctrl-single,bits = <
+ /* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+ 0x1c 0x10110110 0xf0ff0ff0
+ /*
+ * EMA_D[0], EMA_D[1], EMA_D[2],
+ * EMA_D[3], EMA_D[4], EMA_D[5],
+ * EMA_D[6], EMA_D[7]
+ */
+ 0x24 0x11111111 0xffffffff
+ /* EMA_A[1], EMA_A[2] */
+ 0x30 0x01100000 0x0ff00000
+ >;
+ };
+};
+
+&cpu {
+ cpu-supply = <&vdcdc3_reg>;
+};
+
+/*
+ * The standard da850-evm kits and SOM's are 375MHz so enable this operating
+ * point by default. Higher frequencies must be enabled for custom boards with
+ * other variants of the SoC.
+ */
+&opp_375 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&rtc0 {
+ status = "okay";
+};
+
+&lcdc {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ tps: tps@48 {
+ reg = <0x48>;
+ };
+ tlv320aic3106: tlv320aic3106@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x18>;
+ status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&vdcdc2_reg>;
+ AVDD-supply = <&baseboard_3v3>;
+ DRVDD-supply = <&baseboard_3v3>;
+ DVDD-supply = <&baseboard_1v8>;
+ };
+ tca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ tca6416_bb: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&wdt {
+ status = "okay";
+};
+
+&mmc0 {
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH>;
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
+ flash: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <30000000>;
+ m25p,fast-read;
+ reg = <0>;
+ partition@0 {
+ label = "U-Boot-SPL";
+ reg = <0x00000000 0x00010000>;
+ read-only;
+ };
+ partition@1 {
+ label = "U-Boot";
+ reg = <0x00010000 0x00080000>;
+ read-only;
+ };
+ partition@2 {
+ label = "U-Boot-Env";
+ reg = <0x00090000 0x00010000>;
+ read-only;
+ };
+ partition@3 {
+ label = "Kernel";
+ reg = <0x000a0000 0x00280000>;
+ };
+ partition@4 {
+ label = "Filesystem";
+ reg = <0x00320000 0x00400000>;
+ };
+ partition@5 {
+ label = "MAC-Address";
+ reg = <0x007f0000 0x00010000>;
+ read-only;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+ bus_freq = <2200000>;
+};
+
+&eth0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mii_pins>;
+};
+
+&gpio {
+ status = "okay";
+};
+
+/include/ "tps6507x.dtsi"
+
+&tps {
+ vdcdc1_2-supply = <&vbat>;
+ vdcdc3-supply = <&vbat>;
+ vldo1_2-supply = <&vbat>;
+
+ regulators {
+ vdcdc1_reg: regulator@0 {
+ regulator-name = "VDCDC1_3.3V";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdcdc2_reg: regulator@1 {
+ regulator-name = "VDCDC2_3.3V";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <3450000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,defdcdc_default = <1>;
+ };
+
+ vdcdc3_reg: regulator@2 {
+ regulator-name = "VDCDC3_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,defdcdc_default = <1>;
+ };
+
+ ldo1_reg: regulator@3 {
+ regulator-name = "LDO1_1.8V";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: regulator@4 {
+ regulator-name = "LDO2_1.2V";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 1
+ 2 0 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
+
+&edma0 {
+ ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+ ti,edma-reserved-slot-ranges = <32 90>;
+};
+
+&aemif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_pins>;
+ status = "ok";
+ cs3 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ ti,cs-chipselect = <3>;
+
+ nand@2000000,0 {
+ compatible = "ti,davinci-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x02000000 0x02000000
+ 1 0x00000000 0x00008000>;
+
+ ti,davinci-chipselect = <1>;
+ ti,davinci-mask-ale = <0>;
+ ti,davinci-mask-cle = <0>;
+ ti,davinci-mask-chipsel = <0>;
+ ti,davinci-ecc-mode = "hw";
+ ti,davinci-ecc-bits = <4>;
+ ti,davinci-nand-use-bbt;
+ };
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&vpif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
+ /*
+ * The vpif and the LCD are mutually exclusive.
+ * To enable VPIF, disable the ti,tilcdc,panel then
+ * change the status below to 'okay'
+ */
+ status = "disabled";
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 02:05:09 +0000