diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi | 335 |
1 files changed, 335 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi new file mode 100644 index 000000000..6248b126b --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015-2021 DH electronics GmbH + * Copyright (C) 2018 Marek Vasut <marex@denx.de> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + clk_ext_audio_codec: clock-codec { + #clock-cells = <0>; + clock-frequency = <24000000>; + compatible = "fixed-clock"; + }; + + display_bl: display-bl { + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + compatible = "pwm-backlight"; + default-brightness-level = <8>; + enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */ + pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; + status = "okay"; + }; + + lcd_display: disp0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-0 = <&pinctrl_ipu1_lcdif &pinctrl_dhcom_g>; + pinctrl-names = "default"; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + gpio-keys { + #size-cells = <0>; + compatible = "gpio-keys"; + + button-0 { + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */ + label = "TA1-GPIO-A"; + linux,code = <KEY_A>; + pinctrl-0 = <&pinctrl_dhcom_a>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-1 { + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */ + label = "TA2-GPIO-B"; + linux,code = <KEY_B>; + pinctrl-0 = <&pinctrl_dhcom_b>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-2 { + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */ + label = "TA3-GPIO-C"; + linux,code = <KEY_C>; + pinctrl-0 = <&pinctrl_dhcom_c>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-3 { + gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */ + label = "TA4-GPIO-D"; + linux,code = <KEY_D>; + pinctrl-0 = <&pinctrl_dhcom_d>; + pinctrl-names = "default"; + wakeup-source; + }; + }; + + led { + compatible = "gpio-leds"; + + /* + * Disable led-5, because GPIO E is + * already used as touch interrupt. + */ + led-5 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */ + pinctrl-0 = <&pinctrl_dhcom_e>; + pinctrl-names = "default"; + status = "disabled"; + }; + + led-6 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */ + pinctrl-0 = <&pinctrl_dhcom_f>; + pinctrl-names = "default"; + }; + + led-7 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */ + pinctrl-0 = <&pinctrl_dhcom_h>; + pinctrl-names = "default"; + }; + + led-8 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */ + pinctrl-0 = <&pinctrl_dhcom_i>; + pinctrl-names = "default"; + }; + }; + + panel { + backlight = <&display_bl>; + compatible = "edt,etm0700g0edh6"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + sound { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx-sgtl5000"; + mux-ext-port = <3>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; +}; + +&audmux { + pinctrl-0 = <&pinctrl_audmux_ext>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "disabled"; +}; + +/* 1G ethernet */ +/delete-node/ ðphy0; +&fec { + phy-mode = "rgmii"; + phy-handle = <ðphy7>; + pinctrl-0 = <&pinctrl_enet_1G>; + pinctrl-names = "default"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy7: ethernet-phy@7 { /* KSZ 9021 */ + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy7>; + pinctrl-names = "default"; + reg = <7>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + txen-skew-ps = <0>; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + sgtl5000: codec@a { + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <&sw2_reg>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + pinctrl-0 = <&pinctrl_dhcom_e>; + pinctrl-names = "default"; + reg = <0x38>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pcie { + pinctrl-0 = <&pinctrl_pcie &pinctrl_dhcom_j>; + reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; /* GPIO J */ + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&usbh1 { + disable-over-current; +}; + +&usdhc2 { /* SD card */ + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = < + /* + * The following DHCOM GPIOs are used on this board. + * Therefore, they have been removed from the list below. + * A: key TA1 + * B: key TA2 + * C: key TA3 + * D: key TA4 + * E: touchscreen + * F: led6 + * G: backlight enable + * H: led7 + * I: led8 + * J: PCIe reset + */ + &pinctrl_hog_base + &pinctrl_dhcom_k &pinctrl_dhcom_l + &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o + &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r + &pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u + &pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int + >; + pinctrl-names = "default"; + + pinctrl_audmux_ext: audmux-ext-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + >; + }; + + pinctrl_enet_1G: enet-1G-grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + >; + }; + + pinctrl_ethphy7: ethphy7-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0xb1 /* WOL */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0xb0 /* Reset */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0xb1 /* Int */ + >; + }; +}; |