diff options
Diffstat (limited to 'arch/arm/boot/dts/omap36xx.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/omap36xx.dtsi | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi new file mode 100644 index 000000000..32ac7924a --- /dev/null +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Device Tree Source for OMAP3 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/media/omap3-isp.h> + +#include "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + cpus { + /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */ + cpu: cpu@0 { + operating-points-v2 = <&cpu0_opp_table>; + + vbb-supply = <&abb_mpu_iva>; + clock-latency = <300000>; /* From omap-cpufreq driver */ + #cooling-cells = <2>; + }; + }; + + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + /* + * we currently only select the max voltage from table + * Table 4-19 of the DM3730 Data sheet (SPRS685B) + * Format is: cpu0-supply: <target min max> + * vbb-supply: <target min max> + */ + opp-microvolt = <1012500 1012500 1012500>, + <1012500 1012500 1012500>; + /* + * first value is silicon revision bit mask + * second one is "speed binned" bit mask + */ + opp-supported-hw = <0xffffffff 3>; + opp-suspend; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1200000 1200000>, + <1200000 1200000 1200000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp130-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1325000 1325000 1325000>, + <1325000 1325000 1325000>; + opp-supported-hw = <0xffffffff 3>; + }; + + opp1g-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1375000 1375000 1375000>, + <1375000 1375000 1375000>; + /* only on am/dm37x with speed-binned bit set */ + opp-supported-hw = <0xffffffff 2>; + }; + }; + + opp_supply_mpu_iva: opp_supply { + compatible = "ti,omap-opp-supply"; + ti,absolute-max-voltage-uv = <1375000>; + }; + + ocp@68000000 { + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + dmas = <&sdma 81 &sdma 82>; + dma-names = "tx", "rx"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + + abb_mpu_iva: regulator-abb-mpu { + compatible = "ti,abb-v1"; + regulator-name = "abb_mpu_iva"; + #address-cells = <0>; + #size-cells = <0>; + reg = <0x483072f0 0x8>, <0x48306818 0x4>; + reg-names = "base-address", "int-address"; + ti,tranxdone-status-mask = <0x4000000>; + clocks = <&sys_ck>; + ti,settling-time = <30>; + ti,clock-cycles = <8>; + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1012500 0 0 0 0 0 + 1200000 0 0 0 0 0 + 1325000 0 0 0 0 0 + 1375000 1 0 0 0 0 + >; + }; + + omap3_pmx_core2: pinmux@480025a0 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x480025a0 0x5c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; + + isp: isp@480bc000 { + compatible = "ti,omap3-isp"; + reg = <0x480bc000 0x12fc + 0x480bd800 0x0600>; + interrupts = <24>; + iommus = <&mmu_isp>; + syscon = <&scm_conf 0x2f0>; + ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>; + #clock-cells = <1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + bandgap: bandgap@48002524 { + reg = <0x48002524 0x4>; + compatible = "ti,omap36xx-bandgap"; + #thermal-sensor-cells = <0>; + }; + + target-module@480cb000 { + compatible = "ti,sysc-omap3630-sr", "ti,sysc"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&sr2_fck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480cb000 0x001000>; + + smartreflex_core: smartreflex@0 { + compatible = "ti,omap3-smartreflex-core"; + reg = <0 0x400>; + interrupts = <19>; + }; + }; + + target-module@480c9000 { + compatible = "ti,sysc-omap3630-sr", "ti,sysc"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9038 0x4>; + reg-names = "sysc"; + ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&sr1_fck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480c9000 0x001000>; + + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-mpu-iva"; + reg = <0 0x400>; + interrupts = <18>; + }; + }; + + /* + * Note that the sysconfig register layout is a subset of the + * "ti,sysc-omap4" type register with just sidle and midle bits + * available while omap34xx has "ti,sysc-omap2" type sysconfig. + */ + sgx_module: target-module@50000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x5000fe00 0x4>, + <0x5000fe10 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&sgx_fck>, <&sgx_ick>; + clock-names = "fck", "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x2000000>; + + /* + * Closed source PowerVR driver, no child device + * binding or driver in mainline + */ + }; + }; + + thermal_zones: thermal-zones { + #include "omap3-cpu-thermal.dtsi" + }; +}; + +&sdma { + compatible = "ti,omap3630-sdma", "ti,omap-sdma"; +}; + +/* OMAP3630 needs dss_96m_fck for VENC */ +&venc { + clocks = <&dss_tv_fck>, <&dss_96m_fck>; + clock-names = "fck", "tv_dac_clk"; +}; + +&ssi { + status = "okay"; + + clocks = <&ssi_ssr_fck>, + <&ssi_sst_fck>, + <&ssi_ick>; + clock-names = "ssi_ssr_fck", + "ssi_sst_fck", + "ssi_ick"; +}; + +/include/ "omap34xx-omap36xx-clocks.dtsi" +/include/ "omap36xx-omap3430es2plus-clocks.dtsi" +/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" +/include/ "omap36xx-clocks.dtsi" |