diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-ipq8064-rb3011.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 359 |
1 files changed, 359 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts new file mode 100644 index 000000000..5a65cce25 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-ipq8064.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "MikroTik RB3011UiAS-RM"; + compatible = "mikrotik,rb3011"; + + aliases { + serial0 = &gsbi7_serial; + ethernet0 = &gmac0; + ethernet1 = &gmac3; + mdio-gpio0 = &mdio0; + mdio-gpio1 = &mdio1; + }; + + chosen { + bootargs = "loglevel=8 console=ttyMSM0,115200"; + stdout-path = "serial0:115200n8"; + }; + + memory@42000000 { + reg = <0x42000000 0x3e000000>; + device_type = "memory"; + }; + + mdio0: mdio-0 { + status = "okay"; + compatible = "virtual,mdio-gpio"; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + switch0: switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + dsa,member = <0 0>; + + pinctrl-0 = <&sw0_reset_pin>; + pinctrl-names = "default"; + + reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch0cpu: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "sw1"; + }; + + port@2 { + reg = <2>; + label = "sw2"; + }; + + port@3 { + reg = <3>; + label = "sw3"; + }; + + port@4 { + reg = <4>; + label = "sw4"; + }; + + port@5 { + reg = <5>; + label = "sw5"; + }; + }; + }; + }; + + mdio1: mdio-1 { + status = "okay"; + compatible = "virtual,mdio-gpio"; + gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 10 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + + switch1: switch@14 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + dsa,member = <1 0>; + + pinctrl-0 = <&sw1_reset_pin>; + pinctrl-names = "default"; + + reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch1cpu: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac3>; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "sw6"; + }; + + port@2 { + reg = <2>; + label = "sw7"; + }; + + port@3 { + reg = <3>; + label = "sw8"; + }; + + port@4 { + reg = <4>; + label = "sw9"; + }; + + port@5 { + reg = <5>; + label = "sw10"; + }; + }; + }; + }; + + soc { + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + norflash: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "RouterBoot"; + reg = <0x0 0x40000>; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + button { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led@7 { + label = "rb3011:green:user"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + }; +}; + +&adm_dma { + status = "okay"; +}; + +&gmac0 { + status = "okay"; + + phy-mode = "rgmii"; + qcom,id = <0>; + phy-handle = <&switch0cpu>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac3 { + status = "okay"; + + phy-mode = "sgmii"; + qcom,id = <3>; + phy-handle = <&switch1cpu>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gsbi7 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C_UART>; +}; + +&gsbi7_serial { + status = "okay"; +}; + +&hs_phy_1 { + status = "okay"; +}; + +&nand { + status = "okay"; + + nandcs@0 { + compatible = "qcom,nandcs"; + reg = <0>; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "RouterBoard NAND 1 Boot"; + reg = <0x0000000 0x0800000>; + }; + + main@800000 { + label = "RouterBoard NAND 1 Main"; + reg = <0x0800000 0x7800000>; + }; + }; + }; +}; + +&qcom_pinmux { + buttons_pins: buttons_pins { + mux { + pins = "gpio66"; + drive-strength = <16>; + bias-disable; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio33"; + drive-strength = <16>; + bias-disable; + }; + }; + + mdio1_pins: mdio1_pins { + mux { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + sw0_reset_pin: sw0_reset_pin { + mux { + pins = "gpio16"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; + }; + }; + + sw1_reset_pin: sw1_reset_pin { + mux { + pins = "gpio17"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio4"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; +}; + +&ss_phy_1 { + status = "okay"; +}; + +&usb3_1 { + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; |