1 files changed, 130 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
new file mode 100644
index 000000000..411c8d63c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "okay";
+
+			serial@16340000 {
+				status = "okay";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+
+			spi4: spi@1a280000 {
+				status = "okay";
+				spi-max-frequency = <50000000>;
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 0>;
+
+				flash: flash@0 {
+					compatible = "s25fl256s1";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partition@0 {
+						label = "rootfs";
+						reg = <0x0 0x1000000>;
+					};
+
+					partition@1 {
+						label = "scratch";
+						reg = <0x1000000 0x1000000>;
+					};
+				};
+			};
+		};
+
+		sata-phy@1b400000 {
+			status = "okay";
+		};
+
+		sata@29000000 {
+			ports-implemented = <0x1>;
+			status = "okay";
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&buttons_pins>;
+			pinctrl-names = "default";
+
+			button-1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+			button-2 {
+				label = "wps";
+				linux,code = <KEY_WPS_BUTTON>;
+				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led@7 {
+				label = "led_usb1";
+				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "usbdev";
+				default-state = "off";
+			};
+
+			led@8 {
+				label = "led_usb3";
+				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "usbdev";
+				default-state = "off";
+			};
+
+			led@9 {
+				label = "status_led_fail";
+				function = LED_FUNCTION_STATUS;
+				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led@26 {
+				label = "sata_led";
+				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+
+			led@53 {
+				label = "status_led_pass";
+				function = LED_FUNCTION_STATUS;
+				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+	};
+};