diff options
Diffstat (limited to 'arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi new file mode 100644 index 000000000..00ce9d79f --- /dev/null +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree for the TVK1281618 R3 user interface board (UIB) + * also known as the "CYTTSP board" + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> + +/ { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&hall_tvk_mode>; + + button@145 { + /* Hall sensor */ + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + linux,code = <0>; /* SW_LID */ + label = "HED54XXU11 Hall Effect Sensor"; + }; + }; + + soc { + i2c@80004000 { + tc35893@44 { + compatible = "toshiba,tc35893"; + reg = <0x44>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tc35893_tvk_mode>; + + interrupt-controller; + #interrupt-cells = <1>; + status = "disabled"; + + tc3589x_gpio { + compatible = "toshiba,tc3589x-gpio"; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + tc3589x_keypad { + compatible = "toshiba,tc3589x-keypad"; + interrupts = <6>; + debounce-delay-ms = <4>; + keypad,num-columns = <8>; + keypad,num-rows = <8>; + linux,no-autorepeat; + wakeup-source; + linux,keymap = <MATRIX_KEY(3, 1, KEY_END)>, + <MATRIX_KEY(4, 1, KEY_HOME)>, + <MATRIX_KEY(6, 4, KEY_VOLUMEDOWN)>, + <MATRIX_KEY(4, 2, KEY_EMAIL)>, + <MATRIX_KEY(3, 3, KEY_RIGHT)>, + <MATRIX_KEY(2, 5, KEY_BACKSPACE)>, + <MATRIX_KEY(6, 7, KEY_MENU)>, + <MATRIX_KEY(5, 0, KEY_ENTER)>, + <MATRIX_KEY(4, 3, KEY_0)>, + <MATRIX_KEY(3, 4, KEY_DOT)>, + <MATRIX_KEY(5, 2, KEY_UP)>, + <MATRIX_KEY(3, 5, KEY_DOWN)>, + <MATRIX_KEY(4, 5, KEY_SEND)>, + <MATRIX_KEY(0, 5, KEY_BACK)>, + <MATRIX_KEY(6, 2, KEY_VOLUMEUP)>, + <MATRIX_KEY(1, 3, KEY_SPACE)>, + <MATRIX_KEY(7, 6, KEY_LEFT)>, + <MATRIX_KEY(5, 5, KEY_SEARCH)>; + }; + }; + }; + + i2c@80128000 { + accelerometer@19 { + compatible = "st,lsm303dlhc-accel"; + st,drdy-int-pin = <1>; + reg = <0x19>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "-1"; + }; + magnetometer@1e { + compatible = "st,lsm303dlm-magn"; + reg = <0x1e>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + // This interrupt is not properly working with the driver + // interrupt-parent = <&gpio1>; + // interrupts = <0 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&magn_tvk_mode>; + }; + gyroscope@68 { + /* Gyroscope */ + compatible = "st,l3g4200d-gyro"; + reg = <0x68>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + pressure@5c { + /* Barometer/pressure sensor */ + compatible = "st,lps001wp-press"; + reg = <0x5c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + }; + + spi@80111000 { + num-cs = <1>; + cs-gpios = <&gpio6 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_default_mode>; + status = "okay"; + + touchscreen@0 { + compatible = "cypress,cy8ctma340"; + /* + * Actually the max frequency is 6 MHz, but over 2 MHz the + * data rate needs to be restricted to max 2Mbps which the + * SPI framework cannot handle. + */ + spi-max-frequency = <2000000>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + vcpin-supply = <&ab8500_ldo_aux1_reg>; + vdd-supply = <&db8500_vsmps2_reg>; + reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <480>; + touchscreen-size-y = <854>; + active-interval-ms = <0>; + touch-timeout-ms = <255>; + lowpower-interval-ms = <10>; + bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; + pinctrl-names = "default"; + pinctrl-0 = <&cyttsp_tvk_mode>; + }; + }; + + mcde@a0350000 { + status = "okay"; + + dsi@a0351000 { + panel { + compatible = "sony,acx424akp"; + reg = <0>; + vddi-supply = <&ab8500_ldo_aux1_reg>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + }; + }; + + pinctrl { + hall { + hall_tvk_mode: hall_tvk { + tvk_cfg { + pins = "GPIO145_C13"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + tc35893 { + /* IRQ from the TC35893 */ + tc35893_tvk_mode: tc35893_tvk { + tvk_cfg { + pins = "GPIO64_F3"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + accelerometer { + accel_tvk_mode: accel_tvk { + /* Accelerometer interrupt lines 1 & 2 */ + tvk_cfg { + pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + magnetometer { + magn_tvk_mode: magn_tvk { + /* GPIO 32 used for DRDY, pull this down */ + tvk_cfg { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + cyttsp { + cyttsp_tvk_mode: cyttsp_tvk { + /* Touchscreen uses GPIO84 for IRQ */ + tvk_cfg1 { + pins = "GPIO84_C2"; + ste,config = <&gpio_in_pu>; + }; + /* GPIO143 is reset */ + tvk_cfg2 { + pins = "GPIO143_D12"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + }; + }; +}; |