diff options
Diffstat (limited to 'arch/arm/boot/dts/ste-hrefv60plus-stuib.dts')
-rw-r--r-- | arch/arm/boot/dts/ste-hrefv60plus-stuib.dts | 74 |
1 files changed, 74 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts new file mode 100644 index 000000000..52c56ed17 --- /dev/null +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2012 ST-Ericsson AB + * + * Device Tree for the HREF version 60 or later with the ST UIB + */ + +/dts-v1/; +#include "ste-db8500.dtsi" +#include "ste-hrefv60plus.dtsi" +#include "ste-href-stuib.dtsi" + +/ { + model = "ST-Ericsson HREF (v60+) and ST UIB"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&vmmci_default_mode>; + }; + + soc { + /* Reset line for the BU21013 touchscreen */ + i2c@80110000 { + /* Only one of these will be used */ + bu21013_tp@5c { + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 17 GPIO_LINE_OPEN_DRAIN>; + }; + bu21013_tp@5d { + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 17 GPIO_LINE_OPEN_DRAIN>; + }; + }; + }; +}; + +&pinctrl { + vmmci { + vmmci_default_mode: vmmc_default { + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_hi>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; + }; + }; +}; |