diff options
Diffstat (limited to 'arch/arm/mach-davinci/Kconfig')
| -rw-r--r-- | arch/arm/mach-davinci/Kconfig | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig new file mode 100644 index 000000000..672ffb0b5 --- /dev/null +++ b/arch/arm/mach-davinci/Kconfig @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: GPL-2.0 + +menuconfig ARCH_DAVINCI + bool "TI DaVinci" + depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select CPU_ARM926T + select DAVINCI_TIMER + select ZONE_DMA + select PM_GENERIC_DOMAINS if PM + select PM_GENERIC_DOMAINS_OF if PM && OF + select REGMAP_MMIO + select RESET_CONTROLLER + select PINCTRL + select PINCTRL_SINGLE + +if ARCH_DAVINCI + +config ARCH_DAVINCI_DMx + bool + +comment "DaVinci Core Type" + +config ARCH_DAVINCI_DM355 + bool "DaVinci 355 based system" + depends on ATAGS && UNUSED_BOARD_FILES + select DAVINCI_AINTC + select ARCH_DAVINCI_DMx + +config ARCH_DAVINCI_DA830 + bool "DA830/OMAP-L137/AM17x based system" + depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) + depends on ATAGS + select ARCH_DAVINCI_DA8XX + # needed on silicon revs 1.0, 1.1: + select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE + select DAVINCI_CP_INTC + +config ARCH_DAVINCI_DA850 + bool "DA850/OMAP-L138/AM18x based system" + depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) + depends on ATAGS + select ARCH_DAVINCI_DA8XX + select DAVINCI_CP_INTC + +config ARCH_DAVINCI_DA8XX + bool + +config ARCH_DAVINCI_DM365 + bool "DaVinci 365 based system" + depends on ATAGS && UNUSED_BOARD_FILES + select DAVINCI_AINTC + select ARCH_DAVINCI_DMx + +comment "DaVinci Board Type" + +config MACH_DA8XX_DT + bool "Support DA8XX platforms using device tree" + default y + depends on ARCH_DAVINCI_DA850 + select PINCTRL + help + Say y here to include support for TI DaVinci DA850 based using + Flattened Device Tree. More information at Documentation/devicetree + +config MACH_DAVINCI_DM355_EVM + bool "TI DM355 EVM" + default ARCH_DAVINCI_DM355 + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 EVM + +config MACH_DM355_LEOPARD + bool "DM355 Leopard board" + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 Leopard board. + +config MACH_DAVINCI_DM365_EVM + bool "TI DM365 EVM" + default ARCH_DAVINCI_DM365 + depends on ARCH_DAVINCI_DM365 + help + Configure this option to specify whether the board used + for development is a DM365 EVM + +config MACH_DAVINCI_DA830_EVM + bool "TI DA830/OMAP-L137/AM17x Reference Platform" + default ARCH_DAVINCI_DA830 + depends on ATAGS && UNUSED_BOARD_FILES + depends on ARCH_DAVINCI_DA830 + select GPIO_PCF857X if I2C + help + Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. + +choice + prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" + depends on MACH_DAVINCI_DA830_EVM + help + The presence of UI card on the DA830/OMAP-L137/AM17x EVM is + detected automatically based on successful probe of the I2C + based GPIO expander on that board. This option selected in this + menu has an effect only in case of a successful UI card detection. + +config DA830_UI_LCD + bool "LCD" + help + Say Y here to use the LCD as a framebuffer or simple character + display. + +config DA830_UI_NAND + bool "NAND flash" + help + Say Y here to use the NAND flash. Do not forget to setup + the switch correctly. +endchoice + +config MACH_DAVINCI_DA850_EVM + bool "TI DA850/OMAP-L138/AM18x Reference Platform" + depends on ATAGS && UNUSED_BOARD_FILES + default ARCH_DAVINCI_DA850 + depends on ARCH_DAVINCI_DA850 + help + Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. + +choice + prompt "Select peripherals connected to expander on UI board" + depends on MACH_DAVINCI_DA850_EVM + help + The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x + EVM is detected automatically based on successful probe of the I2C + based GPIO expander on that card. This option selected in this + menu has an effect only in case of a successful UI card detection. + +config DA850_UI_NONE + bool "No peripheral is enabled" + help + Say Y if you do not want to enable any of the peripherals connected + to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card + +config DA850_UI_RMII + bool "RMII Ethernet PHY" + help + Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x + EVM. This PHY is found on the UI daughter card that is supplied with + the EVM. + NOTE: Please take care while choosing this option, MII PHY will + not be functional if RMII mode is selected. + +config DA850_UI_SD_VIDEO_PORT + bool "Video Port Interface" + help + Say Y if you want to use Video Port Interface (VPIF) on the + DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the + UI daughter card that is supplied with the EVM. + +endchoice + +config MACH_MITYOMAPL138 + bool "Critical Link MityDSP-L138/MityARM-1808 SoM" + depends on ARCH_DAVINCI_DA850 + depends on ATAGS && UNUSED_BOARD_FILES + help + Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 + System on Module. Information on this SoM may be found at + https://www.mitydsp.com + +config MACH_OMAPL138_HAWKBOARD + bool "TI AM1808 / OMAPL-138 Hawkboard platform" + depends on ARCH_DAVINCI_DA850 + depends on ATAGS && UNUSED_BOARD_FILES + help + Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . + +config DAVINCI_MUX + bool "DAVINCI multiplexing support" + depends on ARCH_DAVINCI + default y + help + Pin multiplexing support for DAVINCI boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. + +config DAVINCI_MUX_DEBUG + bool "Multiplexing debug output" + depends on DAVINCI_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. + +config DAVINCI_MUX_WARNINGS + bool "Warn about pins the bootloader didn't set up" + depends on DAVINCI_MUX + help + Choose Y here to warn whenever driver initialization logic needs + to change the pin multiplexing setup. When there are no warnings + printed, it's safe to deselect DAVINCI_MUX for your product. + +endif |