diff options
Diffstat (limited to 'arch/m68k/coldfire/m5249.c')
| -rw-r--r-- | arch/m68k/coldfire/m5249.c | 147 |
1 files changed, 147 insertions, 0 deletions
diff --git a/arch/m68k/coldfire/m5249.c b/arch/m68k/coldfire/m5249.c new file mode 100644 index 000000000..6d66972de --- /dev/null +++ b/arch/m68k/coldfire/m5249.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 +/***************************************************************************/ + +/* + * m5249.c -- platform support for ColdFire 5249 based boards + * + * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/clkdev.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfclk.h> + +/***************************************************************************/ + +DEFINE_CLK(pll, "pll.0", MCF_CLK); +DEFINE_CLK(sys, "sys.0", MCF_BUSCLK); + +struct clk_lookup m5249_clk_lookup[] = { + CLKDEV_INIT(NULL, "pll.0", &clk_pll), + CLKDEV_INIT(NULL, "sys.0", &clk_sys), + CLKDEV_INIT("mcftmr.0", NULL, &clk_sys), + CLKDEV_INIT("mcftmr.1", NULL, &clk_sys), + CLKDEV_INIT("mcfuart.0", NULL, &clk_sys), + CLKDEV_INIT("mcfuart.1", NULL, &clk_sys), + CLKDEV_INIT("mcfqspi.0", NULL, &clk_sys), + CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys), + CLKDEV_INIT("imx1-i2c.1", NULL, &clk_sys), +}; + +/***************************************************************************/ + +#ifdef CONFIG_M5249C3 + +static struct resource m5249_smc91x_resources[] = { + { + .start = 0xe0000300, + .end = 0xe0000300 + 0x100, + .flags = IORESOURCE_MEM, + }, + { + .start = MCF_IRQ_GPIO6, + .end = MCF_IRQ_GPIO6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m5249_smc91x = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(m5249_smc91x_resources), + .resource = m5249_smc91x_resources, +}; + +#endif /* CONFIG_M5249C3 */ + +static struct platform_device *m5249_devices[] __initdata = { +#ifdef CONFIG_M5249C3 + &m5249_smc91x, +#endif +}; + +/***************************************************************************/ + +static void __init m5249_qspi_init(void) +{ +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) + /* QSPI irq setup */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0, + MCFSIM_QSPIICR); + mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI); +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ +} + +/***************************************************************************/ + +static void __init m5249_i2c_init(void) +{ +#if IS_ENABLED(CONFIG_I2C_IMX) + u32 r; + + /* first I2C controller uses regular irq setup */ + writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0, + MCFSIM_I2CICR); + mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C); + + /* second I2C controller is completely different */ + r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1)); + r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1); + r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1); + writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1)); +#endif /* CONFIG_I2C_IMX */ +} + +/***************************************************************************/ + +#ifdef CONFIG_M5249C3 + +static void __init m5249_smc91x_init(void) +{ + u32 gpio; + + /* Set the GPIO line as interrupt source for smc91x device */ + gpio = readl(MCFSIM2_GPIOINTENABLE); + writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE); + + gpio = readl(MCFINTC2_INTPRI5); + writel(gpio | 0x04000000, MCFINTC2_INTPRI5); +} + +#endif /* CONFIG_M5249C3 */ + +/***************************************************************************/ + +void __init config_BSP(char *commandp, int size) +{ + mach_sched_init = hw_timer_init; + +#ifdef CONFIG_M5249C3 + m5249_smc91x_init(); +#endif + m5249_qspi_init(); + m5249_i2c_init(); + + clkdev_add_table(m5249_clk_lookup, ARRAY_SIZE(m5249_clk_lookup)); +} + +/***************************************************************************/ + +static int __init init_BSP(void) +{ + platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices)); + return 0; +} + +arch_initcall(init_BSP); + +/***************************************************************************/ |