summaryrefslogtreecommitdiffstats
path: root/arch/nios2/platform
diff options
context:
space:
mode:
Diffstat (limited to 'arch/nios2/platform')
-rw-r--r--arch/nios2/platform/Kconfig.platform148
-rw-r--r--arch/nios2/platform/Makefile2
-rw-r--r--arch/nios2/platform/platform.c52
3 files changed, 202 insertions, 0 deletions
diff --git a/arch/nios2/platform/Kconfig.platform b/arch/nios2/platform/Kconfig.platform
new file mode 100644
index 000000000..e849daff6
--- /dev/null
+++ b/arch/nios2/platform/Kconfig.platform
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Platform options"
+
+comment "Memory settings"
+
+config NIOS2_MEM_BASE
+ hex "Memory base address"
+ default "0x00000000"
+ help
+ This is the physical address of the memory that the kernel will run
+ from. This address is used to link the kernel and setup initial memory
+ management. You should take the raw memory address without any MMU
+ or cache bits set.
+ Please not that this address is used directly so you have to manually
+ do address translation if it's connected to a bridge.
+
+comment "Device tree"
+
+config NIOS2_DTB_AT_PHYS_ADDR
+ bool "DTB at physical address"
+ help
+ When enabled you can select a physical address to load the dtb from.
+ Normally this address is passed by a bootloader such as u-boot but
+ using this you can use a devicetree without a bootloader.
+ This way you can store a devicetree in NOR flash or an onchip rom.
+ Please note that this address is used directly so you have to manually
+ do address translation if it's connected to a bridge. Also take into
+ account that when using an MMU you'd have to ad 0xC0000000 to your
+ address
+
+config NIOS2_DTB_PHYS_ADDR
+ hex "DTB Address"
+ depends on NIOS2_DTB_AT_PHYS_ADDR
+ default "0xC0000000"
+ help
+ Physical address of a dtb blob.
+
+config NIOS2_DTB_SOURCE_BOOL
+ bool "Compile and link device tree into kernel image"
+ depends on !COMPILE_TEST
+ help
+ This allows you to specify a dts (device tree source) file
+ which will be compiled and linked into the kernel image.
+
+config NIOS2_DTB_SOURCE
+ string "Device tree source file"
+ depends on NIOS2_DTB_SOURCE_BOOL
+ default ""
+ help
+ Absolute path to the device tree source (dts) file describing your
+ system.
+
+comment "Nios II instructions"
+
+config NIOS2_ARCH_REVISION
+ int "Select Nios II architecture revision"
+ range 1 2
+ default 1
+ help
+ Select between Nios II R1 and Nios II R2 . The architectures
+ are binary incompatible. Default is R1 .
+
+config NIOS2_HW_MUL_SUPPORT
+ bool "Enable MUL instruction"
+ help
+ Set to true if you configured the Nios II to include the MUL
+ instruction. This will enable the -mhw-mul compiler flag.
+
+config NIOS2_HW_MULX_SUPPORT
+ bool "Enable MULX instruction"
+ help
+ Set to true if you configured the Nios II to include the MULX
+ instruction. Enables the -mhw-mulx compiler flag.
+
+config NIOS2_HW_DIV_SUPPORT
+ bool "Enable DIV instruction"
+ help
+ Set to true if you configured the Nios II to include the DIV
+ instruction. Enables the -mhw-div compiler flag.
+
+config NIOS2_BMX_SUPPORT
+ bool "Enable BMX instructions"
+ depends on NIOS2_ARCH_REVISION = 2
+ help
+ Set to true if you configured the Nios II R2 to include
+ the BMX Bit Manipulation Extension instructions. Enables
+ the -mbmx compiler flag.
+
+config NIOS2_CDX_SUPPORT
+ bool "Enable CDX instructions"
+ depends on NIOS2_ARCH_REVISION = 2
+ help
+ Set to true if you configured the Nios II R2 to include
+ the CDX Bit Manipulation Extension instructions. Enables
+ the -mcdx compiler flag.
+
+config NIOS2_FPU_SUPPORT
+ bool "Custom floating point instr support"
+ help
+ Enables the -mcustom-fpu-cfg=60-1 compiler flag.
+
+config NIOS2_CI_SWAB_SUPPORT
+ bool "Byteswap custom instruction"
+ help
+ Use the byteswap (endian converter) Nios II custom instruction provided
+ by Altera and which can be enabled in QSYS builder. This accelerates
+ endian conversions in the kernel (e.g. ntohs).
+
+config NIOS2_CI_SWAB_NO
+ int "Byteswap custom instruction number" if NIOS2_CI_SWAB_SUPPORT
+ default 0
+ help
+ Number of the instruction as configured in QSYS Builder.
+
+comment "Cache settings"
+
+config CUSTOM_CACHE_SETTINGS
+ bool "Custom cache settings"
+ help
+ This option allows you to tweak the cache settings used during early
+ boot (where the information from device tree is not yet available).
+ There should be no reason to change these values. Linux will work
+ perfectly fine, even if the Nios II is configured with smaller caches.
+
+ Say N here unless you know what you are doing.
+
+config NIOS2_DCACHE_SIZE
+ hex "D-Cache size" if CUSTOM_CACHE_SETTINGS
+ range 0x200 0x10000
+ default "0x800"
+ help
+ Maximum possible data cache size.
+
+config NIOS2_DCACHE_LINE_SIZE
+ hex "D-Cache line size" if CUSTOM_CACHE_SETTINGS
+ range 0x10 0x20
+ default "0x20"
+ help
+ Minimum possible data cache line size.
+
+config NIOS2_ICACHE_SIZE
+ hex "I-Cache size" if CUSTOM_CACHE_SETTINGS
+ range 0x200 0x10000
+ default "0x1000"
+ help
+ Maximum possible instruction cache size.
+
+endmenu
diff --git a/arch/nios2/platform/Makefile b/arch/nios2/platform/Makefile
new file mode 100644
index 000000000..fb5bdb44c
--- /dev/null
+++ b/arch/nios2/platform/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += platform.o
diff --git a/arch/nios2/platform/platform.c b/arch/nios2/platform/platform.c
new file mode 100644
index 000000000..9737a8712
--- /dev/null
+++ b/arch/nios2/platform/platform.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2011 Thomas Chou
+ * Copyright (C) 2011 Walter Goossens
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+
+static const struct of_device_id clk_match[] __initconst = {
+ { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+ {}
+};
+
+static int __init nios2_soc_device_init(void)
+{
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+ const char *machine;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (soc_dev_attr) {
+ machine = of_flat_dt_get_machine_name();
+ if (machine)
+ soc_dev_attr->machine = kasprintf(GFP_KERNEL, "%s",
+ machine);
+
+ soc_dev_attr->family = "Nios II";
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->machine);
+ kfree(soc_dev_attr);
+ }
+ }
+
+ of_clk_init(clk_match);
+
+ return 0;
+}
+
+device_initcall(nios2_soc_device_init);