diff options
Diffstat (limited to 'arch/powerpc/boot/dts/ac14xx.dts')
-rw-r--r-- | arch/powerpc/boot/dts/ac14xx.dts | 395 |
1 files changed, 395 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts new file mode 100644 index 000000000..5d8877e1f --- /dev/null +++ b/arch/powerpc/boot/dts/ac14xx.dts @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Device Tree Source for the MPC5121e based ac14xx board + * + * Copyright 2012 Anatolij Gustschin <agust@denx.de> + */ + + +#include "mpc5121.dtsi" + +/ { + model = "ac14xx"; + compatible = "ifm,ac14xx", "fsl,mpc5121"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial7; + spi4 = &spi4; + spi5 = &spi5; + }; + + cpus { + PowerPC,5121@0 { + timebase-frequency = <40000000>; /* 40 MHz (csb/4) */ + bus-frequency = <160000000>; /* 160 MHz csb bus */ + clock-frequency = <400000000>; /* 400 MHz ppc core */ + }; + }; + + memory { + reg = <0x00000000 0x10000000>; /* 256MB at 0 */ + }; + + nfc@40000000 { + status = "disabled"; + }; + + localbus@80000020 { + ranges = <0x0 0x0 0xfc000000 0x04000000 /* CS0: NOR flash */ + 0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */ + 0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */ + 0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */ + 0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */ + 0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */ + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + label = "dtb-kernel-production"; + reg = <0x00000000 0x00400000>; + }; + partition@1 { + label = "filesystem-production"; + reg = <0x00400000 0x03400000>; + }; + + partition@2 { + label = "recovery"; + reg = <0x03800000 0x00700000>; + }; + + partition@3 { + label = "uboot-code"; + reg = <0x03f00000 0x00040000>; + }; + partition@4 { + label = "uboot-env1"; + reg = <0x03f40000 0x00020000>; + }; + partition@5 { + label = "uboot-env2"; + reg = <0x03f60000 0x00020000>; + }; + }; + + fram@1,0 { + compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq"; + reg = <1 0x00000000 0x00010000>; + }; + + asi@2,0 { + /* masters mapping: CS, CS offset, size */ + reg = <2 0x00000000 0x00080000 + 6 0x00000000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "ifm,ac14xx-asi-fpga"; + gpios = < + &gpio_pic 26 0 /* prog */ + &gpio_pic 27 0 /* done */ + &gpio_pic 10 0 /* reset */ + >; + + master@1 { + interrupts = <20 0x2>; + interrupt-parent = <&gpio_pic>; + chipselect = <2 0x00009000 0x00009100>; + label = "AS-i master 1"; + }; + + master@2 { + interrupts = <21 0x2>; + interrupt-parent = <&gpio_pic>; + chipselect = <6 0x00009000 0x00009100>; + label = "AS-i master 2"; + }; + }; + + netx@3,0 { + compatible = "ifm,netx"; + reg = <0x3 0x00000000 0x00020000>; + chipselect = <3 0x00101140 0x00203100>; + interrupts = <17 0x8>; + gpios = <&gpio_pic 15 0>; + }; + + safety@5,0 { + compatible = "ifm,safety"; + reg = <0x5 0x00000000 0x00010000>; + chipselect = <5 0x00009000 0x00009100>; + interrupts = <22 0x2>; + interrupt-parent = <&gpio_pic>; + gpios = < + &gpio_pic 12 0 /* prog */ + &gpio_pic 11 0 /* done */ + >; + }; + }; + + clocks { + osc { + clock-frequency = <25000000>; + }; + }; + + soc@80000000 { + bus-frequency = <80000000>; /* 80 MHz ips bus */ + + clock@f00 { + compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock"; + }; + + /* + * GPIO PIC: + * interrupts cell = <pin nr, sense> + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + gpio_pic: gpio@1100 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdhc@1500 { + cd-gpios = <&gpio_pic 23 0>; /* card detect */ + wp-gpios = <&gpio_pic 24 0>; /* write protect */ + wp-inverted; /* WP active high */ + }; + + i2c@1700 { + /* use Fast-mode */ + clock-frequency = <400000>; + + at24@30 { + compatible = "atmel,24c01"; + reg = <0x30>; + }; + + at24@31 { + compatible = "atmel,24c01"; + reg = <0x31>; + }; + + temp@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + }; + + at24@50 { + compatible = "atmel,24c01"; + reg = <0x50>; + }; + + at24@51 { + compatible = "atmel,24c01"; + reg = <0x51>; + }; + + at24@52 { + compatible = "atmel,24c01"; + reg = <0x52>; + }; + + at24@53 { + compatible = "atmel,24c01"; + reg = <0x53>; + }; + + at24@54 { + compatible = "atmel,24c01"; + reg = <0x54>; + }; + + at24@55 { + compatible = "atmel,24c01"; + reg = <0x55>; + }; + + at24@56 { + compatible = "atmel,24c01"; + reg = <0x56>; + }; + + at24@57 { + compatible = "atmel,24c01"; + reg = <0x57>; + }; + + rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; + }; + + axe_pic: axe-base@2000 { + compatible = "fsl,mpc5121-axe-base"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + axe-app { + compatible = "fsl,mpc5121-axe-app"; + interrupt-parent = <&axe_pic>; + interrupts = < + /* soft interrupts */ + 0 0x0 1 0x0 2 0x0 3 0x0 + 4 0x0 5 0x0 6 0x0 7 0x0 + /* fifo interrupts */ + 8 0x0 9 0x0 10 0x0 11 0x0 + >; + }; + + display@2100 { + edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00 + 0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27 + 1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01 + 01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04 + 21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F + 3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45 + 54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10 + 00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5]; + }; + + can@2300 { + status = "disabled"; + }; + + can@2380 { + status = "disabled"; + }; + + viu@2400 { + status = "disabled"; + }; + + mdio@2800 { + phy0: ethernet-phy@1f { + compatible = "smsc,lan8700"; + reg = <0x1f>; + }; + }; + + enet: ethernet@2800 { + phy-handle = <&phy0>; + }; + + usb@3000 { + status = "disabled"; + }; + + usb@4000 { + status = "disabled"; + }; + + /* PSC3 serial port A, aka ttyPSC0 */ + serial0: psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <512>; + fsl,tx-fifo-size = <512>; + }; + + /* PSC4 in SPI mode */ + spi4: psc@11400 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <768>; + fsl,tx-fifo-size = <768>; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio_pic 25 0>; + + flash: m25p128@0 { + compatible = "st,m25p128"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "spi-flash0"; + reg = <0x00000000 0x01000000>; + }; + }; + }; + + /* PSC5 in SPI mode */ + spi5: psc@11500 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + fsl,mode = "spi-master"; + fsl,rx-fifo-size = <128>; + fsl,tx-fifo-size = <128>; + #address-cells = <1>; + #size-cells = <0>; + + lcd@0 { + compatible = "ilitek,ili922x"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + }; + }; + + /* PSC7 serial port C, aka ttyPSC2 */ + serial7: psc@11700 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <512>; + fsl,tx-fifo-size = <512>; + }; + + matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <1>; + gpio-activelow; + col-gpios-binary; + col-switch-delay-ms = <200>; + + col-gpios = <&gpio_pic 1 0>; /* pin1 */ + + row-gpios = <&gpio_pic 2 0 /* pin2 */ + &gpio_pic 3 0 /* pin3 */ + &gpio_pic 4 0>; /* pin4 */ + + linux,keymap = <0x0000006e /* FN LEFT */ + 0x01000067 /* UP */ + 0x02000066 /* FN RIGHT */ + 0x00010069 /* LEFT */ + 0x0101006a /* DOWN */ + 0x0201006c>; /* RIGHT */ + }; + }; + + leds { + compatible = "gpio-leds"; + + backlight { + label = "backlight"; + gpios = <&gpio_pic 0 0>; + default-state = "keep"; + }; + green { + label = "green"; + gpios = <&gpio_pic 18 0>; + default-state = "keep"; + }; + red { + label = "red"; + gpios = <&gpio_pic 19 0>; + default-state = "keep"; + }; + }; +}; |