diff options
Diffstat (limited to 'arch/powerpc/kernel/cpu_setup_e500.S')
| -rw-r--r-- | arch/powerpc/kernel/cpu_setup_e500.S | 333 |
1 files changed, 333 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/cpu_setup_e500.S b/arch/powerpc/kernel/cpu_setup_e500.S new file mode 100644 index 000000000..2ab25161b --- /dev/null +++ b/arch/powerpc/kernel/cpu_setup_e500.S @@ -0,0 +1,333 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * This file contains low level CPU setup functions. + * Kumar Gala <galak@kernel.crashing.org> + * Copyright 2009 Freescale Semiconductor, Inc. + * + * Based on cpu_setup_6xx code by + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + */ + +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/ppc_asm.h> +#include <asm/nohash/mmu-e500.h> +#include <asm/asm-offsets.h> +#include <asm/mpc85xx.h> + +_GLOBAL(__e500_icache_setup) + mfspr r0, SPRN_L1CSR1 + andi. r3, r0, L1CSR1_ICE + bnelr /* Already enabled */ + oris r0, r0, L1CSR1_CPE@h + ori r0, r0, (L1CSR1_ICFI | L1CSR1_ICLFR | L1CSR1_ICE) + mtspr SPRN_L1CSR1, r0 /* Enable I-Cache */ + isync + blr + +_GLOBAL(__e500_dcache_setup) + mfspr r0, SPRN_L1CSR0 + andi. r3, r0, L1CSR0_DCE + bnelr /* Already enabled */ + msync + isync + li r0, 0 + mtspr SPRN_L1CSR0, r0 /* Disable */ + msync + isync + li r0, (L1CSR0_DCFI | L1CSR0_CLFC) + mtspr SPRN_L1CSR0, r0 /* Invalidate */ + isync +1: mfspr r0, SPRN_L1CSR0 + andi. r3, r0, L1CSR0_CLFC + bne+ 1b /* Wait for lock bits reset */ + oris r0, r0, L1CSR0_CPE@h + ori r0, r0, L1CSR0_DCE + msync + isync + mtspr SPRN_L1CSR0, r0 /* Enable */ + isync + blr + +/* + * FIXME - we haven't yet done testing to determine a reasonable default + * value for PW20_WAIT_IDLE_BIT. + */ +#define PW20_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */ +_GLOBAL(setup_pw20_idle) + mfspr r3, SPRN_PWRMGTCR0 + + /* Set PW20_WAIT bit, enable pw20 state*/ + ori r3, r3, PWRMGTCR0_PW20_WAIT + li r11, PW20_WAIT_IDLE_BIT + + /* Set Automatic PW20 Core Idle Count */ + rlwimi r3, r11, PWRMGTCR0_PW20_ENT_SHIFT, PWRMGTCR0_PW20_ENT + + mtspr SPRN_PWRMGTCR0, r3 + + blr + +/* + * FIXME - we haven't yet done testing to determine a reasonable default + * value for AV_WAIT_IDLE_BIT. + */ +#define AV_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */ +_GLOBAL(setup_altivec_idle) + mfspr r3, SPRN_PWRMGTCR0 + + /* Enable Altivec Idle */ + oris r3, r3, PWRMGTCR0_AV_IDLE_PD_EN@h + li r11, AV_WAIT_IDLE_BIT + + /* Set Automatic AltiVec Idle Count */ + rlwimi r3, r11, PWRMGTCR0_AV_IDLE_CNT_SHIFT, PWRMGTCR0_AV_IDLE_CNT + + mtspr SPRN_PWRMGTCR0, r3 + + blr + +#ifdef CONFIG_PPC_E500MC +_GLOBAL(__setup_cpu_e6500) + mflr r6 +#ifdef CONFIG_PPC64 + bl setup_altivec_ivors + /* Touch IVOR42 only if the CPU supports E.HV category */ + mfspr r10,SPRN_MMUCFG + rlwinm. r10,r10,0,MMUCFG_LPIDSIZE + beq 1f + bl setup_lrat_ivor +1: +#endif + bl setup_pw20_idle + bl setup_altivec_idle + bl __setup_cpu_e5500 + mtlr r6 + blr +#endif /* CONFIG_PPC_E500MC */ + +#ifdef CONFIG_PPC32 +#ifdef CONFIG_PPC_E500 +#ifndef CONFIG_PPC_E500MC +_GLOBAL(__setup_cpu_e500v1) +_GLOBAL(__setup_cpu_e500v2) + mflr r4 + bl __e500_icache_setup + bl __e500_dcache_setup + bl __setup_e500_ivors +#if defined(CONFIG_FSL_RIO) || defined(CONFIG_FSL_PCI) + /* Ensure that RFXE is set */ + mfspr r3,SPRN_HID1 + oris r3,r3,HID1_RFXE@h + mtspr SPRN_HID1,r3 +#endif + mtlr r4 + blr +#else /* CONFIG_PPC_E500MC */ +_GLOBAL(__setup_cpu_e500mc) +_GLOBAL(__setup_cpu_e5500) + mflr r5 + bl __e500_icache_setup + bl __e500_dcache_setup + bl __setup_e500mc_ivors + /* + * We only want to touch IVOR38-41 if we're running on hardware + * that supports category E.HV. The architectural way to determine + * this is MMUCFG[LPIDSIZE]. + */ + mfspr r3, SPRN_MMUCFG + rlwinm. r3, r3, 0, MMUCFG_LPIDSIZE + beq 1f + bl __setup_ehv_ivors + b 2f +1: + lwz r3, CPU_SPEC_FEATURES(r4) + /* We need this check as cpu_setup is also called for + * the secondary cores. So, if we have already cleared + * the feature on the primary core, avoid doing it on the + * secondary core. + */ + andi. r6, r3, CPU_FTR_EMB_HV + beq 2f + rlwinm r3, r3, 0, ~CPU_FTR_EMB_HV + stw r3, CPU_SPEC_FEATURES(r4) +2: + mtlr r5 + blr +#endif /* CONFIG_PPC_E500MC */ +#endif /* CONFIG_PPC_E500 */ +#endif /* CONFIG_PPC32 */ + +#ifdef CONFIG_PPC_BOOK3E_64 +_GLOBAL(__restore_cpu_e6500) + mflr r5 + bl setup_altivec_ivors + /* Touch IVOR42 only if the CPU supports E.HV category */ + mfspr r10,SPRN_MMUCFG + rlwinm. r10,r10,0,MMUCFG_LPIDSIZE + beq 1f + bl setup_lrat_ivor +1: + bl setup_pw20_idle + bl setup_altivec_idle + bl __restore_cpu_e5500 + mtlr r5 + blr + +_GLOBAL(__restore_cpu_e5500) + mflr r4 + bl __e500_icache_setup + bl __e500_dcache_setup + bl __setup_base_ivors + bl setup_perfmon_ivor + bl setup_doorbell_ivors + /* + * We only want to touch IVOR38-41 if we're running on hardware + * that supports category E.HV. The architectural way to determine + * this is MMUCFG[LPIDSIZE]. + */ + mfspr r10,SPRN_MMUCFG + rlwinm. r10,r10,0,MMUCFG_LPIDSIZE + beq 1f + bl setup_ehv_ivors +1: + mtlr r4 + blr + +_GLOBAL(__setup_cpu_e5500) + mflr r5 + bl __e500_icache_setup + bl __e500_dcache_setup + bl __setup_base_ivors + bl setup_perfmon_ivor + bl setup_doorbell_ivors + /* + * We only want to touch IVOR38-41 if we're running on hardware + * that supports category E.HV. The architectural way to determine + * this is MMUCFG[LPIDSIZE]. + */ + mfspr r10,SPRN_MMUCFG + rlwinm. r10,r10,0,MMUCFG_LPIDSIZE + beq 1f + bl setup_ehv_ivors + b 2f +1: + ld r10,CPU_SPEC_FEATURES(r4) + LOAD_REG_IMMEDIATE(r9,CPU_FTR_EMB_HV) + andc r10,r10,r9 + std r10,CPU_SPEC_FEATURES(r4) +2: + mtlr r5 + blr +#endif + +/* flush L1 data cache, it can apply to e500v2, e500mc and e5500 */ +_GLOBAL(flush_dcache_L1) + mfmsr r10 + wrteei 0 + + mfspr r3,SPRN_L1CFG0 + rlwinm r5,r3,9,3 /* Extract cache block size */ + twlgti r5,1 /* Only 32 and 64 byte cache blocks + * are currently defined. + */ + li r4,32 + subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) - + * log2(number of ways) + */ + slw r5,r4,r5 /* r5 = cache block size */ + + rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */ + mulli r7,r7,13 /* An 8-way cache will require 13 + * loads per set. + */ + slw r7,r7,r6 + + /* save off HID0 and set DCFA */ + mfspr r8,SPRN_HID0 + ori r9,r8,HID0_DCFA@l + mtspr SPRN_HID0,r9 + isync + + LOAD_REG_IMMEDIATE(r6, KERNELBASE) + mr r4, r6 + mtctr r7 + +1: lwz r3,0(r4) /* Load... */ + add r4,r4,r5 + bdnz 1b + + msync + mr r4, r6 + mtctr r7 + +1: dcbf 0,r4 /* ...and flush. */ + add r4,r4,r5 + bdnz 1b + + /* restore HID0 */ + mtspr SPRN_HID0,r8 + isync + + wrtee r10 + + blr + +has_L2_cache: + /* skip L2 cache on P2040/P2040E as they have no L2 cache */ + mfspr r3, SPRN_SVR + /* shift right by 8 bits and clear E bit of SVR */ + rlwinm r4, r3, 24, ~0x800 + + lis r3, SVR_P2040@h + ori r3, r3, SVR_P2040@l + cmpw r4, r3 + beq 1f + + li r3, 1 + blr +1: + li r3, 0 + blr + +/* flush backside L2 cache */ +flush_backside_L2_cache: + mflr r10 + bl has_L2_cache + mtlr r10 + cmpwi r3, 0 + beq 2f + + /* Flush the L2 cache */ + mfspr r3, SPRN_L2CSR0 + ori r3, r3, L2CSR0_L2FL@l + msync + isync + mtspr SPRN_L2CSR0,r3 + isync + + /* check if it is complete */ +1: mfspr r3,SPRN_L2CSR0 + andi. r3, r3, L2CSR0_L2FL@l + bne 1b +2: + blr + +_GLOBAL(cpu_down_flush_e500v2) + mflr r0 + bl flush_dcache_L1 + mtlr r0 + blr + +_GLOBAL(cpu_down_flush_e500mc) +_GLOBAL(cpu_down_flush_e5500) + mflr r0 + bl flush_dcache_L1 + bl flush_backside_L2_cache + mtlr r0 + blr + +/* L1 Data Cache of e6500 contains no modified data, no flush is required */ +_GLOBAL(cpu_down_flush_e6500) + blr |