diff options
Diffstat (limited to 'arch/powerpc/platforms/86xx/mvme7100.c')
| -rw-r--r-- | arch/powerpc/platforms/86xx/mvme7100.c | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/86xx/mvme7100.c b/arch/powerpc/platforms/86xx/mvme7100.c new file mode 100644 index 000000000..b2cc32a32 --- /dev/null +++ b/arch/powerpc/platforms/86xx/mvme7100.c @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Board setup routines for the Emerson/Artesyn MVME7100 + * + * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A. + * + * Author: Alessio Igor Bogani <alessio.bogani@elettra.eu> + * + * Based on earlier code by: + * + * Ajit Prem <ajit.prem@emerson.com> + * Copyright 2008 Emerson + * + * USB host fixup is borrowed by: + * + * Martyn Welch <martyn.welch@ge.com> + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + */ + +#include <linux/pci.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "mpc86xx.h" + +#define MVME7100_INTERRUPT_REG_2_OFFSET 0x05 +#define MVME7100_DS1375_MASK 0x40 +#define MVME7100_MAX6649_MASK 0x20 +#define MVME7100_ABORT_MASK 0x10 + +/* + * Setup the architecture + */ +static void __init mvme7100_setup_arch(void) +{ + struct device_node *bcsr_node; + void __iomem *mvme7100_regs = NULL; + u8 reg; + + if (ppc_md.progress) + ppc_md.progress("mvme7100_setup_arch()", 0); + +#ifdef CONFIG_SMP + mpc86xx_smp_init(); +#endif + + fsl_pci_assign_primary(); + + /* Remap BCSR registers */ + bcsr_node = of_find_compatible_node(NULL, NULL, + "artesyn,mvme7100-bcsr"); + if (bcsr_node) { + mvme7100_regs = of_iomap(bcsr_node, 0); + of_node_put(bcsr_node); + } + + if (mvme7100_regs) { + /* Disable ds1375, max6649, and abort interrupts */ + reg = readb(mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET); + reg |= MVME7100_DS1375_MASK | MVME7100_MAX6649_MASK + | MVME7100_ABORT_MASK; + writeb(reg, mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET); + } else + pr_warn("Unable to map board registers\n"); + + pr_info("MVME7100 board from Artesyn\n"); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mvme7100_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "artesyn,MVME7100"); +} + +static void mvme7100_usb_host_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + if (!machine_is(mvme7100)) + return; + + /* Ensure only ports 1 & 2 are enabled */ + pci_read_config_dword(pdev, 0xe0, &val); + pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2); + + /* System clock is 48-MHz Oscillator and EHCI Enabled. */ + pci_write_config_dword(pdev, 0xe4, 1 << 5); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + mvme7100_usb_host_fixup); + +machine_arch_initcall(mvme7100, mpc86xx_common_publish_devices); + +define_machine(mvme7100) { + .name = "MVME7100", + .probe = mvme7100_probe, + .setup_arch = mvme7100_setup_arch, + .init_IRQ = mpc86xx_init_irq, + .get_irq = mpic_get_irq, + .time_init = mpc86xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; |