diff options
Diffstat (limited to 'arch/powerpc/platforms/Kconfig')
| -rw-r--r-- | arch/powerpc/platforms/Kconfig | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig new file mode 100644 index 000000000..d41dad227 --- /dev/null +++ b/arch/powerpc/platforms/Kconfig @@ -0,0 +1,302 @@ +# SPDX-License-Identifier: GPL-2.0 +menu "Platform support" + +source "arch/powerpc/platforms/powernv/Kconfig" +source "arch/powerpc/platforms/pseries/Kconfig" +source "arch/powerpc/platforms/chrp/Kconfig" +source "arch/powerpc/platforms/512x/Kconfig" +source "arch/powerpc/platforms/52xx/Kconfig" +source "arch/powerpc/platforms/powermac/Kconfig" +source "arch/powerpc/platforms/maple/Kconfig" +source "arch/powerpc/platforms/pasemi/Kconfig" +source "arch/powerpc/platforms/ps3/Kconfig" +source "arch/powerpc/platforms/cell/Kconfig" +source "arch/powerpc/platforms/8xx/Kconfig" +source "arch/powerpc/platforms/82xx/Kconfig" +source "arch/powerpc/platforms/83xx/Kconfig" +source "arch/powerpc/platforms/85xx/Kconfig" +source "arch/powerpc/platforms/86xx/Kconfig" +source "arch/powerpc/platforms/embedded6xx/Kconfig" +source "arch/powerpc/platforms/44x/Kconfig" +source "arch/powerpc/platforms/40x/Kconfig" +source "arch/powerpc/platforms/amigaone/Kconfig" +source "arch/powerpc/platforms/book3s/Kconfig" +source "arch/powerpc/platforms/microwatt/Kconfig" + +config KVM_GUEST + bool "KVM Guest support" + select EPAPR_PARAVIRT + help + This option enables various optimizations for running under the KVM + hypervisor. Overhead for the kernel when not running inside KVM should + be minimal. + + In case of doubt, say Y + +config EPAPR_PARAVIRT + bool "ePAPR para-virtualization support" + help + Enables ePAPR para-virtualization support for guests. + + In case of doubt, say Y + +config PPC_HASH_MMU_NATIVE + bool + depends on PPC_BOOK3S + help + Support for running natively on the hardware, i.e. without + a hypervisor. This option is not user-selectable but should + be selected by all platforms that need it. + +config PPC_OF_BOOT_TRAMPOLINE + bool "Support booting from Open Firmware or yaboot" + depends on PPC_BOOK3S_32 || PPC64 + select RELOCATABLE if PPC64 + default y + help + Support from booting from Open Firmware or yaboot using an + Open Firmware client interface. This enables the kernel to + communicate with open firmware to retrieve system information + such as the device tree. + + In case of doubt, say Y + +config PPC_DT_CPU_FTRS + bool "Device-tree based CPU feature discovery & setup" + depends on PPC_BOOK3S_64 + default y + help + This enables code to use a new device tree binding for describing CPU + compatibility and features. Saying Y here will attempt to use the new + binding if the firmware provides it. Currently only the skiboot + firmware provides this binding. + If you're not sure say Y. + +config UDBG_RTAS_CONSOLE + bool "RTAS based debug console" + depends on PPC_RTAS + +config PPC_SMP_MUXED_IPI + bool + help + Select this option if your platform supports SMP and your + interrupt controller provides less than 4 interrupts to each + cpu. This will enable the generic code to multiplex the 4 + messages on to one ipi. + +config IPIC + bool + +config MPIC + bool + +config MPIC_TIMER + bool "MPIC Global Timer" + depends on MPIC && FSL_SOC + help + The MPIC global timer is a hardware timer inside the + Freescale PIC complying with OpenPIC standard. When the + specified interval times out, the hardware timer generates + an interrupt. The driver currently is only tested on fsl + chip, but it can potentially support other global timers + complying with the OpenPIC standard. + +config FSL_MPIC_TIMER_WAKEUP + tristate "Freescale MPIC global timer wakeup driver" + depends on FSL_SOC && MPIC_TIMER && PM + help + The driver provides a way to wake up the system by MPIC + timer. + e.g. "echo 5 > /sys/devices/system/mpic/timer_wakeup" + +config PPC_EPAPR_HV_PIC + bool + select EPAPR_PARAVIRT + +config MPIC_WEIRD + bool + +config MPIC_MSGR + bool "MPIC message register support" + depends on MPIC + help + Enables support for the MPIC message registers. These + registers are used for inter-processor communication. + +config PPC_I8259 + bool + +config U3_DART + bool + depends on PPC64 + +config PPC_RTAS + bool + +config RTAS_ERROR_LOGGING + bool + depends on PPC_RTAS + +config PPC_RTAS_DAEMON + bool + depends on PPC_RTAS + +config RTAS_PROC + bool "Proc interface to RTAS" + depends on PPC_RTAS && PROC_FS + default y + +config RTAS_FLASH + tristate "Firmware flash interface" + depends on PPC64 && RTAS_PROC + +config MMIO_NVRAM + bool + +config MPIC_U3_HT_IRQS + bool + +config MPIC_BROKEN_REGREAD + bool + depends on MPIC + help + This option enables a MPIC driver workaround for some chips + that have a bug that causes some interrupt source information + to not read back properly. It is safe to use on other chips as + well, but enabling it uses about 8KB of memory to keep copies + of the register contents in software. + +config EEH + bool + depends on (PPC_POWERNV || PPC_PSERIES) && PCI + default y + +config PPC_MPC106 + bool + +config PPC_970_NAP + bool + +config PPC_P7_NAP + bool + +config PPC_BOOK3S_IDLE + def_bool y + depends on (PPC_970_NAP || PPC_P7_NAP) + +config PPC_INDIRECT_PIO + bool + select GENERIC_IOMAP + +config PPC_INDIRECT_MMIO + bool + +config PPC_IO_WORKAROUNDS + bool + +source "drivers/cpufreq/Kconfig" + +menu "CPUIdle driver" + +source "drivers/cpuidle/Kconfig" + +endmenu + +config TAU + bool "On-chip CPU temperature sensor support" + depends on PPC_BOOK3S_32 + help + G3 and G4 processors have an on-chip temperature sensor called the + 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die + temperature within 2-4 degrees Celsius. This option shows the current + on-die temperature in /proc/cpuinfo if the cpu supports it. + + Unfortunately, this sensor is very inaccurate when uncalibrated, so + don't assume the cpu temp is actually what /proc/cpuinfo says it is. + +config TAU_INT + bool "Interrupt driven TAU driver (EXPERIMENTAL)" + depends on TAU + help + The TAU supports an interrupt driven mode which causes an interrupt + whenever the temperature goes out of range. This is the fastest way + to get notified the temp has exceeded a range. With this option off, + a timer is used to re-check the temperature periodically. + + If in doubt, say N here. + +config TAU_AVERAGE + bool "Average high and low temp" + depends on TAU + help + The TAU hardware can compare the temperature to an upper and lower + bound. The default behavior is to show both the upper and lower + bound in /proc/cpuinfo. If the range is large, the temperature is + either changing a lot, or the TAU hardware is broken (likely on some + G4's). If the range is small (around 4 degrees), the temperature is + relatively stable. If you say Y here, a single temperature value, + halfway between the upper and lower bounds, will be reported in + /proc/cpuinfo. + + If in doubt, say N here. + +config QE_GPIO + bool "QE GPIO support" + depends on QUICC_ENGINE + select GPIOLIB + help + Say Y here if you're going to use hardware that connects to the + QE GPIOs. + +config CPM2 + bool "Enable support for the CPM2 (Communications Processor Module)" + depends on (FSL_SOC_BOOKE && PPC32) || 8260 + select CPM + select HAVE_PCI + select GPIOLIB + help + The CPM2 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Freescale. Selecting this option means that + you wish to build a kernel for a machine with a CPM2 coprocessor + on it (826x, 827x, 8560). + +config FSL_ULI1575 + bool + select GENERIC_ISA_DMA + help + Supports for the ULI1575 PCIe south bridge that exists on some + Freescale reference boards. The boards all use the ULI in pretty + much the same way. + +config CPM + bool + select GENERIC_ALLOCATOR + +config OF_RTC + bool + help + Uses information from the OF or flattened device tree to instantiate + platform devices for direct mapped RTC chips like the DS1742 or DS1743. + +config GEN_RTC + bool "Use the platform RTC operations from user space" + select RTC_CLASS + select RTC_DRV_GENERIC + help + This option provides backwards compatibility with the old gen_rtc.ko + module that was traditionally used for old PowerPC machines. + Platforms should migrate to enabling the RTC_DRV_GENERIC by hand + replacing their get_rtc_time/set_rtc_time callbacks with + a proper RTC device driver. + +config MCU_MPC8349EMITX + bool "MPC8349E-mITX MCU driver" + depends on I2C=y && PPC_83xx + select GPIOLIB + help + Say Y here to enable soft power-off functionality on the Freescale + boards with the MPC8349E-mITX-compatible MCU chips. This driver will + also register MCU GPIOs with the generic GPIO API, so you'll able + to use MCU pins as GPIOs. + +endmenu |