diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/x86/kernel/vmlinux.lds.S | 539 |
1 files changed, 539 insertions, 0 deletions
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S new file mode 100644 index 000000000..78ccb5ec3 --- /dev/null +++ b/arch/x86/kernel/vmlinux.lds.S @@ -0,0 +1,539 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ld script for the x86 kernel + * + * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> + * + * Modernisation, unification and other changes and fixes: + * Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org> + * + * + * Don't define absolute symbols until and unless you know that symbol + * value is should remain constant even if kernel image is relocated + * at run time. Absolute symbols are not relocated. If symbol value should + * change if kernel is relocated, make the symbol section relative and + * put it inside the section definition. + */ + +#ifdef CONFIG_X86_32 +#define LOAD_OFFSET __PAGE_OFFSET +#else +#define LOAD_OFFSET __START_KERNEL_map +#endif + +#define RUNTIME_DISCARD_EXIT +#define EMITS_PT_NOTE +#define RO_EXCEPTION_TABLE_ALIGN 16 + +#include <asm-generic/vmlinux.lds.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/page_types.h> +#include <asm/orc_lookup.h> +#include <asm/cache.h> +#include <asm/boot.h> + +#undef i386 /* in case the preprocessor is a 32bit one */ + +OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT) + +#ifdef CONFIG_X86_32 +OUTPUT_ARCH(i386) +ENTRY(phys_startup_32) +#else +OUTPUT_ARCH(i386:x86-64) +ENTRY(phys_startup_64) +#endif + +jiffies = jiffies_64; + +#if defined(CONFIG_X86_64) +/* + * On 64-bit, align RODATA to 2MB so we retain large page mappings for + * boundaries spanning kernel text, rodata and data sections. + * + * However, kernel identity mappings will have different RWX permissions + * to the pages mapping to text and to the pages padding (which are freed) the + * text section. Hence kernel identity mappings will be broken to smaller + * pages. For 64-bit, kernel text and kernel identity mappings are different, + * so we can enable protection checks as well as retain 2MB large page + * mappings for kernel text. + */ +#define X86_ALIGN_RODATA_BEGIN . = ALIGN(HPAGE_SIZE); + +#define X86_ALIGN_RODATA_END \ + . = ALIGN(HPAGE_SIZE); \ + __end_rodata_hpage_align = .; \ + __end_rodata_aligned = .; + +#define ALIGN_ENTRY_TEXT_BEGIN . = ALIGN(PMD_SIZE); +#define ALIGN_ENTRY_TEXT_END . = ALIGN(PMD_SIZE); + +/* + * This section contains data which will be mapped as decrypted. Memory + * encryption operates on a page basis. Make this section PMD-aligned + * to avoid splitting the pages while mapping the section early. + * + * Note: We use a separate section so that only this section gets + * decrypted to avoid exposing more than we wish. + */ +#define BSS_DECRYPTED \ + . = ALIGN(PMD_SIZE); \ + __start_bss_decrypted = .; \ + *(.bss..decrypted); \ + . = ALIGN(PAGE_SIZE); \ + __start_bss_decrypted_unused = .; \ + . = ALIGN(PMD_SIZE); \ + __end_bss_decrypted = .; \ + +#else + +#define X86_ALIGN_RODATA_BEGIN +#define X86_ALIGN_RODATA_END \ + . = ALIGN(PAGE_SIZE); \ + __end_rodata_aligned = .; + +#define ALIGN_ENTRY_TEXT_BEGIN +#define ALIGN_ENTRY_TEXT_END +#define BSS_DECRYPTED + +#endif + +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(6); /* RW_ */ +#ifdef CONFIG_X86_64 +#ifdef CONFIG_SMP + percpu PT_LOAD FLAGS(6); /* RW_ */ +#endif + init PT_LOAD FLAGS(7); /* RWE */ +#endif + note PT_NOTE FLAGS(0); /* ___ */ +} + +SECTIONS +{ +#ifdef CONFIG_X86_32 + . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR; + phys_startup_32 = ABSOLUTE(startup_32 - LOAD_OFFSET); +#else + . = __START_KERNEL; + phys_startup_64 = ABSOLUTE(startup_64 - LOAD_OFFSET); +#endif + + /* Text and read-only data */ + .text : AT(ADDR(.text) - LOAD_OFFSET) { + _text = .; + _stext = .; + /* bootstrapping code */ + HEAD_TEXT + TEXT_TEXT + SCHED_TEXT + CPUIDLE_TEXT + LOCK_TEXT + KPROBES_TEXT + ALIGN_ENTRY_TEXT_BEGIN +#ifdef CONFIG_CPU_SRSO + *(.text..__x86.rethunk_untrain) +#endif + + ENTRY_TEXT + +#ifdef CONFIG_CPU_SRSO + /* + * See the comment above srso_alias_untrain_ret()'s + * definition. + */ + . = srso_alias_untrain_ret | (1 << 2) | (1 << 8) | (1 << 14) | (1 << 20); + *(.text..__x86.rethunk_safe) +#endif + ALIGN_ENTRY_TEXT_END + SOFTIRQENTRY_TEXT + STATIC_CALL_TEXT + *(.gnu.warning) + +#ifdef CONFIG_RETPOLINE + __indirect_thunk_start = .; + *(.text..__x86.indirect_thunk) + *(.text..__x86.return_thunk) + __indirect_thunk_end = .; +#endif + } :text =0xcccc + + /* End of text section, which should occupy whole number of pages */ + _etext = .; + + . = ALIGN(PAGE_SIZE); + + X86_ALIGN_RODATA_BEGIN + RO_DATA(PAGE_SIZE) + X86_ALIGN_RODATA_END + + /* Data */ + .data : AT(ADDR(.data) - LOAD_OFFSET) { + /* Start of data section */ + _sdata = .; + + /* init_task */ + INIT_TASK_DATA(THREAD_SIZE) + +#ifdef CONFIG_X86_32 + /* 32 bit has nosave before _edata */ + NOSAVE_DATA +#endif + + PAGE_ALIGNED_DATA(PAGE_SIZE) + + CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) + + DATA_DATA + CONSTRUCTORS + + /* rarely changed data like cpu maps */ + READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES) + + /* End of data section */ + _edata = .; + } :data + + BUG_TABLE + + ORC_UNWIND_TABLE + + . = ALIGN(PAGE_SIZE); + __vvar_page = .; + + .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) { + /* work around gold bug 13023 */ + __vvar_beginning_hack = .; + + /* Place all vvars at the offsets in asm/vvar.h. */ +#define EMIT_VVAR(name, offset) \ + . = __vvar_beginning_hack + offset; \ + *(.vvar_ ## name) +#include <asm/vvar.h> +#undef EMIT_VVAR + + /* + * Pad the rest of the page with zeros. Otherwise the loader + * can leave garbage here. + */ + . = __vvar_beginning_hack + PAGE_SIZE; + } :data + + . = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE); + + /* Init code and data - will be freed after init */ + . = ALIGN(PAGE_SIZE); + .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) { + __init_begin = .; /* paired with __init_end */ + } + +#if defined(CONFIG_X86_64) && defined(CONFIG_SMP) + /* + * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the + * output PHDR, so the next output section - .init.text - should + * start another segment - init. + */ + PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu) + ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START, + "per-CPU data too large - increase CONFIG_PHYSICAL_START") +#endif + + INIT_TEXT_SECTION(PAGE_SIZE) +#ifdef CONFIG_X86_64 + :init +#endif + + /* + * Section for code used exclusively before alternatives are run. All + * references to such code must be patched out by alternatives, normally + * by using X86_FEATURE_ALWAYS CPU feature bit. + * + * See static_cpu_has() for an example. + */ + .altinstr_aux : AT(ADDR(.altinstr_aux) - LOAD_OFFSET) { + *(.altinstr_aux) + } + + INIT_DATA_SECTION(16) + + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { + __x86_cpu_dev_start = .; + *(.x86_cpu_dev.init) + __x86_cpu_dev_end = .; + } + +#ifdef CONFIG_X86_INTEL_MID + .x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \ + LOAD_OFFSET) { + __x86_intel_mid_dev_start = .; + *(.x86_intel_mid_dev.init) + __x86_intel_mid_dev_end = .; + } +#endif + + /* + * start address and size of operations which during runtime + * can be patched with virtualization friendly instructions or + * baremetal native ones. Think page table operations. + * Details in paravirt_types.h + */ + . = ALIGN(8); + .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) { + __parainstructions = .; + *(.parainstructions) + __parainstructions_end = .; + } + +#ifdef CONFIG_RETPOLINE + /* + * List of instructions that call/jmp/jcc to retpoline thunks + * __x86_indirect_thunk_*(). These instructions can be patched along + * with alternatives, after which the section can be freed. + */ + . = ALIGN(8); + .retpoline_sites : AT(ADDR(.retpoline_sites) - LOAD_OFFSET) { + __retpoline_sites = .; + *(.retpoline_sites) + __retpoline_sites_end = .; + } + + . = ALIGN(8); + .return_sites : AT(ADDR(.return_sites) - LOAD_OFFSET) { + __return_sites = .; + *(.return_sites) + __return_sites_end = .; + } +#endif + +#ifdef CONFIG_X86_KERNEL_IBT + . = ALIGN(8); + .ibt_endbr_seal : AT(ADDR(.ibt_endbr_seal) - LOAD_OFFSET) { + __ibt_endbr_seal = .; + *(.ibt_endbr_seal) + __ibt_endbr_seal_end = .; + } +#endif + + /* + * struct alt_inst entries. From the header (alternative.h): + * "Alternative instructions for different CPU types or capabilities" + * Think locking instructions on spinlocks. + */ + . = ALIGN(8); + .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) { + __alt_instructions = .; + *(.altinstructions) + __alt_instructions_end = .; + } + + /* + * And here are the replacement instructions. The linker sticks + * them as binary blobs. The .altinstructions has enough data to + * get the address and the length of them to patch the kernel safely. + */ + .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) { + *(.altinstr_replacement) + } + + . = ALIGN(8); + .apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) { + __apicdrivers = .; + *(.apicdrivers); + __apicdrivers_end = .; + } + + . = ALIGN(8); + /* + * .exit.text is discarded at runtime, not link time, to deal with + * references from .altinstructions + */ + .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { + EXIT_TEXT + } + + .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { + EXIT_DATA + } + +#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) + PERCPU_SECTION(INTERNODE_CACHE_BYTES) +#endif + + . = ALIGN(PAGE_SIZE); + + /* freed after init ends here */ + .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) { + __init_end = .; + } + + /* + * smp_locks might be freed after init + * start/end must be page aligned + */ + . = ALIGN(PAGE_SIZE); + .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { + __smp_locks = .; + *(.smp_locks) + . = ALIGN(PAGE_SIZE); + __smp_locks_end = .; + } + +#ifdef CONFIG_X86_64 + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { + NOSAVE_DATA + } +#endif + + /* BSS */ + . = ALIGN(PAGE_SIZE); + .bss : AT(ADDR(.bss) - LOAD_OFFSET) { + __bss_start = .; + *(.bss..page_aligned) + . = ALIGN(PAGE_SIZE); + *(BSS_MAIN) + BSS_DECRYPTED + . = ALIGN(PAGE_SIZE); + __bss_stop = .; + } + + /* + * The memory occupied from _text to here, __end_of_kernel_reserve, is + * automatically reserved in setup_arch(). Anything after here must be + * explicitly reserved using memblock_reserve() or it will be discarded + * and treated as available memory. + */ + __end_of_kernel_reserve = .; + + . = ALIGN(PAGE_SIZE); + .brk : AT(ADDR(.brk) - LOAD_OFFSET) { + __brk_base = .; + . += 64 * 1024; /* 64k alignment slop space */ + *(.bss..brk) /* areas brk users have reserved */ + __brk_limit = .; + } + + . = ALIGN(PAGE_SIZE); /* keep VO_INIT_SIZE page aligned */ + _end = .; + +#ifdef CONFIG_AMD_MEM_ENCRYPT + /* + * Early scratch/workarea section: Lives outside of the kernel proper + * (_text - _end). + * + * Resides after _end because even though the .brk section is after + * __end_of_kernel_reserve, the .brk section is later reserved as a + * part of the kernel. Since it is located after __end_of_kernel_reserve + * it will be discarded and become part of the available memory. As + * such, it can only be used by very early boot code and must not be + * needed afterwards. + * + * Currently used by SME for performing in-place encryption of the + * kernel during boot. Resides on a 2MB boundary to simplify the + * pagetable setup used for SME in-place encryption. + */ + . = ALIGN(HPAGE_SIZE); + .init.scratch : AT(ADDR(.init.scratch) - LOAD_OFFSET) { + __init_scratch_begin = .; + *(.init.scratch) + . = ALIGN(HPAGE_SIZE); + __init_scratch_end = .; + } +#endif + + STABS_DEBUG + DWARF_DEBUG + ELF_DETAILS + + DISCARDS + + /* + * Make sure that the .got.plt is either completely empty or it + * contains only the lazy dispatch entries. + */ + .got.plt (INFO) : { *(.got.plt) } + ASSERT(SIZEOF(.got.plt) == 0 || +#ifdef CONFIG_X86_64 + SIZEOF(.got.plt) == 0x18, +#else + SIZEOF(.got.plt) == 0xc, +#endif + "Unexpected GOT/PLT entries detected!") + + /* + * Sections that should stay zero sized, which is safer to + * explicitly check instead of blindly discarding. + */ + .got : { + *(.got) *(.igot.*) + } + ASSERT(SIZEOF(.got) == 0, "Unexpected GOT entries detected!") + + .plt : { + *(.plt) *(.plt.*) *(.iplt) + } + ASSERT(SIZEOF(.plt) == 0, "Unexpected run-time procedure linkages detected!") + + .rel.dyn : { + *(.rel.*) *(.rel_*) + } + ASSERT(SIZEOF(.rel.dyn) == 0, "Unexpected run-time relocations (.rel) detected!") + + .rela.dyn : { + *(.rela.*) *(.rela_*) + } + ASSERT(SIZEOF(.rela.dyn) == 0, "Unexpected run-time relocations (.rela) detected!") +} + +/* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ +. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), + "kernel image bigger than KERNEL_IMAGE_SIZE"); + +#ifdef CONFIG_X86_64 +/* + * Per-cpu symbols which need to be offset from __per_cpu_load + * for the boot processor. + */ +#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load +INIT_PER_CPU(gdt_page); +INIT_PER_CPU(fixed_percpu_data); +INIT_PER_CPU(irq_stack_backing_store); + +#ifdef CONFIG_SMP +. = ASSERT((fixed_percpu_data == 0), + "fixed_percpu_data is not at start of per-cpu area"); +#endif + +#ifdef CONFIG_RETHUNK +. = ASSERT((retbleed_return_thunk & 0x3f) == 0, "retbleed_return_thunk not cacheline-aligned"); +. = ASSERT((srso_safe_ret & 0x3f) == 0, "srso_safe_ret not cacheline-aligned"); +#endif + +#ifdef CONFIG_CPU_SRSO +/* + * GNU ld cannot do XOR until 2.41. + * https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=f6f78318fca803c4907fb8d7f6ded8295f1947b1 + * + * LLVM lld cannot do XOR until lld-17. + * https://github.com/llvm/llvm-project/commit/fae96104d4378166cbe5c875ef8ed808a356f3fb + * + * Instead do: (A | B) - (A & B) in order to compute the XOR + * of the two function addresses: + */ +. = ASSERT(((ABSOLUTE(srso_alias_untrain_ret) | srso_alias_safe_ret) - + (ABSOLUTE(srso_alias_untrain_ret) & srso_alias_safe_ret)) == ((1 << 2) | (1 << 8) | (1 << 14) | (1 << 20)), + "SRSO function pair won't alias"); +#endif + +#endif /* CONFIG_X86_64 */ + +#ifdef CONFIG_KEXEC_CORE +#include <asm/kexec.h> + +. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, + "kexec control code size is too big"); +#endif + |