summaryrefslogtreecommitdiffstats
path: root/drivers/ata/libahci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/libahci.c')
-rw-r--r--drivers/ata/libahci.c2673
1 files changed, 2673 insertions, 0 deletions
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
new file mode 100644
index 000000000..1b1671c02
--- /dev/null
+++ b/drivers/ata/libahci.c
@@ -0,0 +1,2673 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * libahci.c - Common AHCI SATA low-level routines
+ *
+ * Maintained by: Tejun Heo <tj@kernel.org>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2004-2005 Red Hat, Inc.
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/driver-api/libata.rst
+ *
+ * AHCI hardware documentation:
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/nospec.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/libata.h>
+#include <linux/pci.h>
+#include "ahci.h"
+#include "libata.h"
+
+static int ahci_skip_host_reset;
+int ahci_ignore_sss;
+EXPORT_SYMBOL_GPL(ahci_ignore_sss);
+
+module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
+MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
+
+module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
+MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
+
+static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+ unsigned hints);
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
+ size_t size);
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size);
+
+
+
+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
+static int ahci_port_start(struct ata_port *ap);
+static void ahci_port_stop(struct ata_port *ap);
+static enum ata_completion_errors ahci_qc_prep(struct ata_queued_cmd *qc);
+static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc);
+static void ahci_freeze(struct ata_port *ap);
+static void ahci_thaw(struct ata_port *ap);
+static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep);
+static void ahci_enable_fbs(struct ata_port *ap);
+static void ahci_disable_fbs(struct ata_port *ap);
+static void ahci_pmp_attach(struct ata_port *ap);
+static void ahci_pmp_detach(struct ata_port *ap);
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static void ahci_postreset(struct ata_link *link, unsigned int *class);
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
+static void ahci_dev_config(struct ata_device *dev);
+#ifdef CONFIG_PM
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
+#endif
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
+static ssize_t ahci_activity_store(struct ata_device *dev,
+ enum sw_activity val);
+static void ahci_init_sw_activity(struct ata_link *link);
+
+static ssize_t ahci_show_host_caps(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_cap2(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_version(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_port_cmd(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_read_em_buffer(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t ahci_store_em_buffer(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size);
+static ssize_t ahci_show_em_supported(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static irqreturn_t ahci_single_level_irq_intr(int irq, void *dev_instance);
+
+static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
+static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
+static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
+static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
+static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO,
+ ahci_read_em_buffer, ahci_store_em_buffer);
+static DEVICE_ATTR(em_message_supported, S_IRUGO, ahci_show_em_supported, NULL);
+
+static struct attribute *ahci_shost_attrs[] = {
+ &dev_attr_link_power_management_policy.attr,
+ &dev_attr_em_message_type.attr,
+ &dev_attr_em_message.attr,
+ &dev_attr_ahci_host_caps.attr,
+ &dev_attr_ahci_host_cap2.attr,
+ &dev_attr_ahci_host_version.attr,
+ &dev_attr_ahci_port_cmd.attr,
+ &dev_attr_em_buffer.attr,
+ &dev_attr_em_message_supported.attr,
+ NULL
+};
+
+static const struct attribute_group ahci_shost_attr_group = {
+ .attrs = ahci_shost_attrs
+};
+
+const struct attribute_group *ahci_shost_groups[] = {
+ &ahci_shost_attr_group,
+ NULL
+};
+EXPORT_SYMBOL_GPL(ahci_shost_groups);
+
+static struct attribute *ahci_sdev_attrs[] = {
+ &dev_attr_sw_activity.attr,
+ &dev_attr_unload_heads.attr,
+ &dev_attr_ncq_prio_supported.attr,
+ &dev_attr_ncq_prio_enable.attr,
+ NULL
+};
+
+static const struct attribute_group ahci_sdev_attr_group = {
+ .attrs = ahci_sdev_attrs
+};
+
+const struct attribute_group *ahci_sdev_groups[] = {
+ &ahci_sdev_attr_group,
+ NULL
+};
+EXPORT_SYMBOL_GPL(ahci_sdev_groups);
+
+struct ata_port_operations ahci_ops = {
+ .inherits = &sata_pmp_port_ops,
+
+ .qc_defer = ahci_pmp_qc_defer,
+ .qc_prep = ahci_qc_prep,
+ .qc_issue = ahci_qc_issue,
+ .qc_fill_rtf = ahci_qc_fill_rtf,
+
+ .freeze = ahci_freeze,
+ .thaw = ahci_thaw,
+ .softreset = ahci_softreset,
+ .hardreset = ahci_hardreset,
+ .postreset = ahci_postreset,
+ .pmp_softreset = ahci_softreset,
+ .error_handler = ahci_error_handler,
+ .post_internal_cmd = ahci_post_internal_cmd,
+ .dev_config = ahci_dev_config,
+
+ .scr_read = ahci_scr_read,
+ .scr_write = ahci_scr_write,
+ .pmp_attach = ahci_pmp_attach,
+ .pmp_detach = ahci_pmp_detach,
+
+ .set_lpm = ahci_set_lpm,
+ .em_show = ahci_led_show,
+ .em_store = ahci_led_store,
+ .sw_activity_show = ahci_activity_show,
+ .sw_activity_store = ahci_activity_store,
+ .transmit_led_message = ahci_transmit_led_message,
+#ifdef CONFIG_PM
+ .port_suspend = ahci_port_suspend,
+ .port_resume = ahci_port_resume,
+#endif
+ .port_start = ahci_port_start,
+ .port_stop = ahci_port_stop,
+};
+EXPORT_SYMBOL_GPL(ahci_ops);
+
+struct ata_port_operations ahci_pmp_retry_srst_ops = {
+ .inherits = &ahci_ops,
+ .softreset = ahci_pmp_retry_softreset,
+};
+EXPORT_SYMBOL_GPL(ahci_pmp_retry_srst_ops);
+
+static bool ahci_em_messages __read_mostly = true;
+module_param(ahci_em_messages, bool, 0444);
+/* add other LED protocol types when they become supported */
+MODULE_PARM_DESC(ahci_em_messages,
+ "AHCI Enclosure Management Message control (0 = off, 1 = on)");
+
+/* device sleep idle timeout in ms */
+static int devslp_idle_timeout __read_mostly = 1000;
+module_param(devslp_idle_timeout, int, 0644);
+MODULE_PARM_DESC(devslp_idle_timeout, "device sleep idle timeout");
+
+static void ahci_enable_ahci(void __iomem *mmio)
+{
+ int i;
+ u32 tmp;
+
+ /* turn on AHCI_EN */
+ tmp = readl(mmio + HOST_CTL);
+ if (tmp & HOST_AHCI_EN)
+ return;
+
+ /* Some controllers need AHCI_EN to be written multiple times.
+ * Try a few times before giving up.
+ */
+ for (i = 0; i < 5; i++) {
+ tmp |= HOST_AHCI_EN;
+ writel(tmp, mmio + HOST_CTL);
+ tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
+ if (tmp & HOST_AHCI_EN)
+ return;
+ msleep(10);
+ }
+
+ WARN_ON(1);
+}
+
+/**
+ * ahci_rpm_get_port - Make sure the port is powered on
+ * @ap: Port to power on
+ *
+ * Whenever there is need to access the AHCI host registers outside of
+ * normal execution paths, call this function to make sure the host is
+ * actually powered on.
+ */
+static int ahci_rpm_get_port(struct ata_port *ap)
+{
+ return pm_runtime_get_sync(ap->dev);
+}
+
+/**
+ * ahci_rpm_put_port - Undoes ahci_rpm_get_port()
+ * @ap: Port to power down
+ *
+ * Undoes ahci_rpm_get_port() and possibly powers down the AHCI host
+ * if it has no more active users.
+ */
+static void ahci_rpm_put_port(struct ata_port *ap)
+{
+ pm_runtime_put(ap->dev);
+}
+
+static ssize_t ahci_show_host_caps(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ return sprintf(buf, "%x\n", hpriv->cap);
+}
+
+static ssize_t ahci_show_host_cap2(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ return sprintf(buf, "%x\n", hpriv->cap2);
+}
+
+static ssize_t ahci_show_host_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ return sprintf(buf, "%x\n", hpriv->version);
+}
+
+static ssize_t ahci_show_port_cmd(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ void __iomem *port_mmio = ahci_port_base(ap);
+ ssize_t ret;
+
+ ahci_rpm_get_port(ap);
+ ret = sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD));
+ ahci_rpm_put_port(ap);
+
+ return ret;
+}
+
+static ssize_t ahci_read_em_buffer(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ void __iomem *em_mmio = mmio + hpriv->em_loc;
+ u32 em_ctl, msg;
+ unsigned long flags;
+ size_t count;
+ int i;
+
+ ahci_rpm_get_port(ap);
+ spin_lock_irqsave(ap->lock, flags);
+
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if (!(ap->flags & ATA_FLAG_EM) || em_ctl & EM_CTL_XMT ||
+ !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO)) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ ahci_rpm_put_port(ap);
+ return -EINVAL;
+ }
+
+ if (!(em_ctl & EM_CTL_MR)) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ ahci_rpm_put_port(ap);
+ return -EAGAIN;
+ }
+
+ if (!(em_ctl & EM_CTL_SMB))
+ em_mmio += hpriv->em_buf_sz;
+
+ count = hpriv->em_buf_sz;
+
+ /* the count should not be larger than PAGE_SIZE */
+ if (count > PAGE_SIZE) {
+ if (printk_ratelimit())
+ ata_port_warn(ap,
+ "EM read buffer size too large: "
+ "buffer size %u, page size %lu\n",
+ hpriv->em_buf_sz, PAGE_SIZE);
+ count = PAGE_SIZE;
+ }
+
+ for (i = 0; i < count; i += 4) {
+ msg = readl(em_mmio + i);
+ buf[i] = msg & 0xff;
+ buf[i + 1] = (msg >> 8) & 0xff;
+ buf[i + 2] = (msg >> 16) & 0xff;
+ buf[i + 3] = (msg >> 24) & 0xff;
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ ahci_rpm_put_port(ap);
+
+ return i;
+}
+
+static ssize_t ahci_store_em_buffer(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ void __iomem *em_mmio = mmio + hpriv->em_loc;
+ const unsigned char *msg_buf = buf;
+ u32 em_ctl, msg;
+ unsigned long flags;
+ int i;
+
+ /* check size validity */
+ if (!(ap->flags & ATA_FLAG_EM) ||
+ !(hpriv->em_msg_type & EM_MSG_TYPE_SGPIO) ||
+ size % 4 || size > hpriv->em_buf_sz)
+ return -EINVAL;
+
+ ahci_rpm_get_port(ap);
+ spin_lock_irqsave(ap->lock, flags);
+
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if (em_ctl & EM_CTL_TM) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ ahci_rpm_put_port(ap);
+ return -EBUSY;
+ }
+
+ for (i = 0; i < size; i += 4) {
+ msg = msg_buf[i] | msg_buf[i + 1] << 8 |
+ msg_buf[i + 2] << 16 | msg_buf[i + 3] << 24;
+ writel(msg, em_mmio + i);
+ }
+
+ writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ ahci_rpm_put_port(ap);
+
+ return size;
+}
+
+static ssize_t ahci_show_em_supported(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 em_ctl;
+
+ ahci_rpm_get_port(ap);
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ ahci_rpm_put_port(ap);
+
+ return sprintf(buf, "%s%s%s%s\n",
+ em_ctl & EM_CTL_LED ? "led " : "",
+ em_ctl & EM_CTL_SAFTE ? "saf-te " : "",
+ em_ctl & EM_CTL_SES ? "ses-2 " : "",
+ em_ctl & EM_CTL_SGPIO ? "sgpio " : "");
+}
+
+/**
+ * ahci_save_initial_config - Save and fixup initial config values
+ * @dev: target AHCI device
+ * @hpriv: host private area to store config values
+ *
+ * Some registers containing configuration info might be setup by
+ * BIOS and might be cleared on reset. This function saves the
+ * initial values of those registers into @hpriv such that they
+ * can be restored after controller reset.
+ *
+ * If inconsistent, config values are fixed up by this function.
+ *
+ * If it is not set already this function sets hpriv->start_engine to
+ * ahci_start_engine.
+ *
+ * LOCKING:
+ * None.
+ */
+void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv)
+{
+ void __iomem *mmio = hpriv->mmio;
+ void __iomem *port_mmio;
+ unsigned long port_map;
+ u32 cap, cap2, vers;
+ int i;
+
+ /* make sure AHCI mode is enabled before accessing CAP */
+ ahci_enable_ahci(mmio);
+
+ /*
+ * Values prefixed with saved_ are written back to the HBA and ports
+ * registers after reset. Values without are used for driver operation.
+ */
+
+ /*
+ * Override HW-init HBA capability fields with the platform-specific
+ * values. The rest of the HBA capabilities are defined as Read-only
+ * and can't be modified in CSR anyway.
+ */
+ cap = readl(mmio + HOST_CAP);
+ if (hpriv->saved_cap)
+ cap = (cap & ~(HOST_CAP_SSS | HOST_CAP_MPS)) | hpriv->saved_cap;
+ hpriv->saved_cap = cap;
+
+ /* CAP2 register is only defined for AHCI 1.2 and later */
+ vers = readl(mmio + HOST_VERSION);
+ if ((vers >> 16) > 1 ||
+ ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
+ hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
+ else
+ hpriv->saved_cap2 = cap2 = 0;
+
+ /* some chips have errata preventing 64bit use */
+ if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
+ dev_info(dev, "controller can't do 64bit DMA, forcing 32bit\n");
+ cap &= ~HOST_CAP_64;
+ }
+
+ if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
+ dev_info(dev, "controller can't do NCQ, turning off CAP_NCQ\n");
+ cap &= ~HOST_CAP_NCQ;
+ }
+
+ if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
+ dev_info(dev, "controller can do NCQ, turning on CAP_NCQ\n");
+ cap |= HOST_CAP_NCQ;
+ }
+
+ if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
+ dev_info(dev, "controller can't do PMP, turning off CAP_PMP\n");
+ cap &= ~HOST_CAP_PMP;
+ }
+
+ if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
+ dev_info(dev,
+ "controller can't do SNTF, turning off CAP_SNTF\n");
+ cap &= ~HOST_CAP_SNTF;
+ }
+
+ if ((cap2 & HOST_CAP2_SDS) && (hpriv->flags & AHCI_HFLAG_NO_DEVSLP)) {
+ dev_info(dev,
+ "controller can't do DEVSLP, turning off\n");
+ cap2 &= ~HOST_CAP2_SDS;
+ cap2 &= ~HOST_CAP2_SADM;
+ }
+
+ if (!(cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_YES_FBS)) {
+ dev_info(dev, "controller can do FBS, turning on CAP_FBS\n");
+ cap |= HOST_CAP_FBS;
+ }
+
+ if ((cap & HOST_CAP_FBS) && (hpriv->flags & AHCI_HFLAG_NO_FBS)) {
+ dev_info(dev, "controller can't do FBS, turning off CAP_FBS\n");
+ cap &= ~HOST_CAP_FBS;
+ }
+
+ if (!(cap & HOST_CAP_ALPM) && (hpriv->flags & AHCI_HFLAG_YES_ALPM)) {
+ dev_info(dev, "controller can do ALPM, turning on CAP_ALPM\n");
+ cap |= HOST_CAP_ALPM;
+ }
+
+ if ((cap & HOST_CAP_SXS) && (hpriv->flags & AHCI_HFLAG_NO_SXS)) {
+ dev_info(dev, "controller does not support SXS, disabling CAP_SXS\n");
+ cap &= ~HOST_CAP_SXS;
+ }
+
+ /* Override the HBA ports mapping if the platform needs it */
+ port_map = readl(mmio + HOST_PORTS_IMPL);
+ if (hpriv->saved_port_map && port_map != hpriv->saved_port_map) {
+ dev_info(dev, "forcing port_map 0x%lx -> 0x%x\n",
+ port_map, hpriv->saved_port_map);
+ port_map = hpriv->saved_port_map;
+ } else {
+ hpriv->saved_port_map = port_map;
+ }
+
+ if (hpriv->mask_port_map) {
+ dev_warn(dev, "masking port_map 0x%lx -> 0x%lx\n",
+ port_map,
+ port_map & hpriv->mask_port_map);
+ port_map &= hpriv->mask_port_map;
+ }
+
+ /* cross check port_map and cap.n_ports */
+ if (port_map) {
+ int map_ports = 0;
+
+ for (i = 0; i < AHCI_MAX_PORTS; i++)
+ if (port_map & (1 << i))
+ map_ports++;
+
+ /* If PI has more ports than n_ports, whine, clear
+ * port_map and let it be generated from n_ports.
+ */
+ if (map_ports > ahci_nr_ports(cap)) {
+ dev_warn(dev,
+ "implemented port map (0x%lx) contains more ports than nr_ports (%u), using nr_ports\n",
+ port_map, ahci_nr_ports(cap));
+ port_map = 0;
+ }
+ }
+
+ /* fabricate port_map from cap.nr_ports for < AHCI 1.3 */
+ if (!port_map && vers < 0x10300) {
+ port_map = (1 << ahci_nr_ports(cap)) - 1;
+ dev_warn(dev, "forcing PORTS_IMPL to 0x%lx\n", port_map);
+
+ /* write the fixed up value to the PI register */
+ hpriv->saved_port_map = port_map;
+ }
+
+ /*
+ * Preserve the ports capabilities defined by the platform. Note there
+ * is no need in storing the rest of the P#.CMD fields since they are
+ * volatile.
+ */
+ for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) {
+ if (hpriv->saved_port_cap[i])
+ continue;
+
+ port_mmio = __ahci_port_base(hpriv, i);
+ hpriv->saved_port_cap[i] =
+ readl(port_mmio + PORT_CMD) & PORT_CMD_CAP;
+ }
+
+ /* record values to use during operation */
+ hpriv->cap = cap;
+ hpriv->cap2 = cap2;
+ hpriv->version = vers;
+ hpriv->port_map = port_map;
+
+ if (!hpriv->start_engine)
+ hpriv->start_engine = ahci_start_engine;
+
+ if (!hpriv->stop_engine)
+ hpriv->stop_engine = ahci_stop_engine;
+
+ if (!hpriv->irq_handler)
+ hpriv->irq_handler = ahci_single_level_irq_intr;
+}
+EXPORT_SYMBOL_GPL(ahci_save_initial_config);
+
+/**
+ * ahci_restore_initial_config - Restore initial config
+ * @host: target ATA host
+ *
+ * Restore initial config stored by ahci_save_initial_config().
+ *
+ * LOCKING:
+ * None.
+ */
+static void ahci_restore_initial_config(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ unsigned long port_map = hpriv->port_map;
+ void __iomem *mmio = hpriv->mmio;
+ void __iomem *port_mmio;
+ int i;
+
+ writel(hpriv->saved_cap, mmio + HOST_CAP);
+ if (hpriv->saved_cap2)
+ writel(hpriv->saved_cap2, mmio + HOST_CAP2);
+ writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
+ (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
+
+ for_each_set_bit(i, &port_map, AHCI_MAX_PORTS) {
+ port_mmio = __ahci_port_base(hpriv, i);
+ writel(hpriv->saved_port_cap[i], port_mmio + PORT_CMD);
+ }
+}
+
+static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
+{
+ static const int offset[] = {
+ [SCR_STATUS] = PORT_SCR_STAT,
+ [SCR_CONTROL] = PORT_SCR_CTL,
+ [SCR_ERROR] = PORT_SCR_ERR,
+ [SCR_ACTIVE] = PORT_SCR_ACT,
+ [SCR_NOTIFICATION] = PORT_SCR_NTF,
+ };
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ if (sc_reg < ARRAY_SIZE(offset) &&
+ (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
+ return offset[sc_reg];
+ return 0;
+}
+
+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ int offset = ahci_scr_offset(link->ap, sc_reg);
+
+ if (offset) {
+ *val = readl(port_mmio + offset);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ int offset = ahci_scr_offset(link->ap, sc_reg);
+
+ if (offset) {
+ writel(val, port_mmio + offset);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+void ahci_start_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+
+ /* start DMA */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_START;
+ writel(tmp, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+}
+EXPORT_SYMBOL_GPL(ahci_start_engine);
+
+int ahci_stop_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ u32 tmp;
+
+ /*
+ * On some controllers, stopping a port's DMA engine while the port
+ * is in ALPM state (partial or slumber) results in failures on
+ * subsequent DMA engine starts. For those controllers, put the
+ * port back in active state before stopping its DMA engine.
+ */
+ if ((hpriv->flags & AHCI_HFLAG_WAKE_BEFORE_STOP) &&
+ (ap->link.lpm_policy > ATA_LPM_MAX_POWER) &&
+ ahci_set_lpm(&ap->link, ATA_LPM_MAX_POWER, ATA_LPM_WAKE_ONLY)) {
+ dev_err(ap->host->dev, "Failed to wake up port before engine stop\n");
+ return -EIO;
+ }
+
+ tmp = readl(port_mmio + PORT_CMD);
+
+ /* check if the HBA is idle */
+ if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
+ return 0;
+
+ /*
+ * Don't try to issue commands but return with ENODEV if the
+ * AHCI controller not available anymore (e.g. due to PCIe hot
+ * unplugging). Otherwise a 500ms delay for each port is added.
+ */
+ if (tmp == 0xffffffff) {
+ dev_err(ap->host->dev, "AHCI controller unavailable!\n");
+ return -ENODEV;
+ }
+
+ /* setting HBA to idle */
+ tmp &= ~PORT_CMD_START;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* wait for engine to stop. This could be as long as 500 msec */
+ tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
+ PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
+ if (tmp & PORT_CMD_LIST_ON)
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_stop_engine);
+
+void ahci_start_fis_rx(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 tmp;
+
+ /* set FIS registers */
+ if (hpriv->cap & HOST_CAP_64)
+ writel((pp->cmd_slot_dma >> 16) >> 16,
+ port_mmio + PORT_LST_ADDR_HI);
+ writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
+
+ if (hpriv->cap & HOST_CAP_64)
+ writel((pp->rx_fis_dma >> 16) >> 16,
+ port_mmio + PORT_FIS_ADDR_HI);
+ writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
+
+ /* enable FIS reception */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_FIS_RX;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* flush */
+ readl(port_mmio + PORT_CMD);
+}
+EXPORT_SYMBOL_GPL(ahci_start_fis_rx);
+
+static int ahci_stop_fis_rx(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+
+ /* disable FIS reception */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp &= ~PORT_CMD_FIS_RX;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* wait for completion, spec says 500ms, give it 1000 */
+ tmp = ata_wait_register(ap, port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
+ PORT_CMD_FIS_ON, 10, 1000);
+ if (tmp & PORT_CMD_FIS_ON)
+ return -EBUSY;
+
+ return 0;
+}
+
+static void ahci_power_up(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd;
+
+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+
+ /* spin up device */
+ if (hpriv->cap & HOST_CAP_SSS) {
+ cmd |= PORT_CMD_SPIN_UP;
+ writel(cmd, port_mmio + PORT_CMD);
+ }
+
+ /* wake up link */
+ writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
+}
+
+static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+ unsigned int hints)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+
+ if (policy != ATA_LPM_MAX_POWER) {
+ /* wakeup flag only applies to the max power policy */
+ hints &= ~ATA_LPM_WAKE_ONLY;
+
+ /*
+ * Disable interrupts on Phy Ready. This keeps us from
+ * getting woken up due to spurious phy ready
+ * interrupts.
+ */
+ pp->intr_mask &= ~PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+ sata_link_scr_lpm(link, policy, false);
+ }
+
+ if (hpriv->cap & HOST_CAP_ALPM) {
+ u32 cmd = readl(port_mmio + PORT_CMD);
+
+ if (policy == ATA_LPM_MAX_POWER || !(hints & ATA_LPM_HIPM)) {
+ if (!(hints & ATA_LPM_WAKE_ONLY))
+ cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE);
+ cmd |= PORT_CMD_ICC_ACTIVE;
+
+ writel(cmd, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD);
+
+ /* wait 10ms to be sure we've come out of LPM state */
+ ata_msleep(ap, 10);
+
+ if (hints & ATA_LPM_WAKE_ONLY)
+ return 0;
+ } else {
+ cmd |= PORT_CMD_ALPE;
+ if (policy == ATA_LPM_MIN_POWER)
+ cmd |= PORT_CMD_ASP;
+ else if (policy == ATA_LPM_MIN_POWER_WITH_PARTIAL)
+ cmd &= ~PORT_CMD_ASP;
+
+ /* write out new cmd value */
+ writel(cmd, port_mmio + PORT_CMD);
+ }
+ }
+
+ /* set aggressive device sleep */
+ if ((hpriv->cap2 & HOST_CAP2_SDS) &&
+ (hpriv->cap2 & HOST_CAP2_SADM) &&
+ (link->device->flags & ATA_DFLAG_DEVSLP)) {
+ if (policy == ATA_LPM_MIN_POWER ||
+ policy == ATA_LPM_MIN_POWER_WITH_PARTIAL)
+ ahci_set_aggressive_devslp(ap, true);
+ else
+ ahci_set_aggressive_devslp(ap, false);
+ }
+
+ if (policy == ATA_LPM_MAX_POWER) {
+ sata_link_scr_lpm(link, policy, false);
+
+ /* turn PHYRDY IRQ back on */
+ pp->intr_mask |= PORT_IRQ_PHYRDY;
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static void ahci_power_down(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd, scontrol;
+
+ if (!(hpriv->cap & HOST_CAP_SSS))
+ return;
+
+ /* put device into listen mode, first set PxSCTL.DET to 0 */
+ scontrol = readl(port_mmio + PORT_SCR_CTL);
+ scontrol &= ~0xf;
+ writel(scontrol, port_mmio + PORT_SCR_CTL);
+
+ /* then set PxCMD.SUD to 0 */
+ cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+ cmd &= ~PORT_CMD_SPIN_UP;
+ writel(cmd, port_mmio + PORT_CMD);
+}
+#endif
+
+static void ahci_start_port(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_link *link;
+ struct ahci_em_priv *emp;
+ ssize_t rc;
+ int i;
+
+ /* enable FIS reception */
+ ahci_start_fis_rx(ap);
+
+ /* enable DMA */
+ if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE))
+ hpriv->start_engine(ap);
+
+ /* turn on LEDs */
+ if (ap->flags & ATA_FLAG_EM) {
+ ata_for_each_link(link, ap, EDGE) {
+ emp = &pp->em_priv[link->pmp];
+
+ /* EM Transmit bit maybe busy during init */
+ for (i = 0; i < EM_MAX_RETRY; i++) {
+ rc = ap->ops->transmit_led_message(ap,
+ emp->led_state,
+ 4);
+ /*
+ * If busy, give a breather but do not
+ * release EH ownership by using msleep()
+ * instead of ata_msleep(). EM Transmit
+ * bit is busy for the whole host and
+ * releasing ownership will cause other
+ * ports to fail the same way.
+ */
+ if (rc == -EBUSY)
+ msleep(1);
+ else
+ break;
+ }
+ }
+ }
+
+ if (ap->flags & ATA_FLAG_SW_ACTIVITY)
+ ata_for_each_link(link, ap, EDGE)
+ ahci_init_sw_activity(link);
+
+}
+
+static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
+{
+ int rc;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ /* disable DMA */
+ rc = hpriv->stop_engine(ap);
+ if (rc) {
+ *emsg = "failed to stop engine";
+ return rc;
+ }
+
+ /* disable FIS reception */
+ rc = ahci_stop_fis_rx(ap);
+ if (rc) {
+ *emsg = "failed stop FIS RX";
+ return rc;
+ }
+
+ return 0;
+}
+
+int ahci_reset_controller(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 tmp;
+
+ /* we must be in AHCI mode, before using anything
+ * AHCI-specific, such as HOST_RESET.
+ */
+ ahci_enable_ahci(mmio);
+
+ /* global controller reset */
+ if (!ahci_skip_host_reset) {
+ tmp = readl(mmio + HOST_CTL);
+ if ((tmp & HOST_RESET) == 0) {
+ writel(tmp | HOST_RESET, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ }
+
+ /*
+ * to perform host reset, OS should set HOST_RESET
+ * and poll until this bit is read to be "0".
+ * reset must complete within 1 second, or
+ * the hardware should be considered fried.
+ */
+ tmp = ata_wait_register(NULL, mmio + HOST_CTL, HOST_RESET,
+ HOST_RESET, 10, 1000);
+
+ if (tmp & HOST_RESET) {
+ dev_err(host->dev, "controller reset failed (0x%x)\n",
+ tmp);
+ return -EIO;
+ }
+
+ /* turn on AHCI mode */
+ ahci_enable_ahci(mmio);
+
+ /* Some registers might be cleared on reset. Restore
+ * initial values.
+ */
+ if (!(hpriv->flags & AHCI_HFLAG_NO_WRITE_TO_RO))
+ ahci_restore_initial_config(host);
+ } else
+ dev_info(host->dev, "skipping global host reset\n");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_reset_controller);
+
+static void ahci_sw_activity(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
+ return;
+
+ emp->activity++;
+ if (!timer_pending(&emp->timer))
+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
+}
+
+static void ahci_sw_activity_blink(struct timer_list *t)
+{
+ struct ahci_em_priv *emp = from_timer(emp, t, timer);
+ struct ata_link *link = emp->link;
+ struct ata_port *ap = link->ap;
+
+ unsigned long led_message = emp->led_state;
+ u32 activity_led_state;
+ unsigned long flags;
+
+ led_message &= EM_MSG_LED_VALUE;
+ led_message |= ap->port_no | (link->pmp << 8);
+
+ /* check to see if we've had activity. If so,
+ * toggle state of LED and reset timer. If not,
+ * turn LED to desired idle state.
+ */
+ spin_lock_irqsave(ap->lock, flags);
+ if (emp->saved_activity != emp->activity) {
+ emp->saved_activity = emp->activity;
+ /* get the current LED state */
+ activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
+
+ if (activity_led_state)
+ activity_led_state = 0;
+ else
+ activity_led_state = 1;
+
+ /* clear old state */
+ led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
+
+ /* toggle state */
+ led_message |= (activity_led_state << 16);
+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
+ } else {
+ /* switch to idle */
+ led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
+ if (emp->blink_policy == BLINK_OFF)
+ led_message |= (1 << 16);
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+ ap->ops->transmit_led_message(ap, led_message, 4);
+}
+
+static void ahci_init_sw_activity(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ /* init activity stats, setup timer */
+ emp->saved_activity = emp->activity = 0;
+ emp->link = link;
+ timer_setup(&emp->timer, ahci_sw_activity_blink, 0);
+
+ /* check our blink policy and set flag for link if it's enabled */
+ if (emp->blink_policy)
+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
+}
+
+int ahci_reset_em(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 em_ctl;
+
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
+ return -EINVAL;
+
+ writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_reset_em);
+
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 em_ctl;
+ u32 message[] = {0, 0};
+ unsigned long flags;
+ int pmp;
+ struct ahci_em_priv *emp;
+
+ /* get the slot number from the message */
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+ if (pmp < EM_MAX_SLOTS)
+ emp = &pp->em_priv[pmp];
+ else
+ return -EINVAL;
+
+ ahci_rpm_get_port(ap);
+ spin_lock_irqsave(ap->lock, flags);
+
+ /*
+ * if we are still busy transmitting a previous message,
+ * do not allow
+ */
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if (em_ctl & EM_CTL_TM) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ ahci_rpm_put_port(ap);
+ return -EBUSY;
+ }
+
+ if (hpriv->em_msg_type & EM_MSG_TYPE_LED) {
+ /*
+ * create message header - this is all zero except for
+ * the message size, which is 4 bytes.
+ */
+ message[0] |= (4 << 8);
+
+ /* ignore 0:4 of byte zero, fill in port info yourself */
+ message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
+
+ /* write message to EM_LOC */
+ writel(message[0], mmio + hpriv->em_loc);
+ writel(message[1], mmio + hpriv->em_loc+4);
+
+ /*
+ * tell hardware to transmit the message
+ */
+ writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
+ }
+
+ /* save off new led state for port/slot */
+ emp->led_state = state;
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ ahci_rpm_put_port(ap);
+
+ return size;
+}
+
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_link *link;
+ struct ahci_em_priv *emp;
+ int rc = 0;
+
+ ata_for_each_link(link, ap, EDGE) {
+ emp = &pp->em_priv[link->pmp];
+ rc += sprintf(buf, "%lx\n", emp->led_state);
+ }
+ return rc;
+}
+
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
+ size_t size)
+{
+ unsigned int state;
+ int pmp;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp;
+
+ if (kstrtouint(buf, 0, &state) < 0)
+ return -EINVAL;
+
+ /* get the slot number from the message */
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+ if (pmp < EM_MAX_SLOTS) {
+ pmp = array_index_nospec(pmp, EM_MAX_SLOTS);
+ emp = &pp->em_priv[pmp];
+ } else {
+ return -EINVAL;
+ }
+
+ /* mask off the activity bits if we are in sw_activity
+ * mode, user should turn off sw_activity before setting
+ * activity led through em_message
+ */
+ if (emp->blink_policy)
+ state &= ~EM_MSG_LED_VALUE_ACTIVITY;
+
+ return ap->ops->transmit_led_message(ap, state, size);
+}
+
+static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+ u32 port_led_state = emp->led_state;
+
+ /* save the desired Activity LED behavior */
+ if (val == OFF) {
+ /* clear LFLAG */
+ link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
+
+ /* set the LED to OFF */
+ port_led_state &= EM_MSG_LED_VALUE_OFF;
+ port_led_state |= (ap->port_no | (link->pmp << 8));
+ ap->ops->transmit_led_message(ap, port_led_state, 4);
+ } else {
+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
+ if (val == BLINK_OFF) {
+ /* set LED to ON for idle */
+ port_led_state &= EM_MSG_LED_VALUE_OFF;
+ port_led_state |= (ap->port_no | (link->pmp << 8));
+ port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
+ ap->ops->transmit_led_message(ap, port_led_state, 4);
+ }
+ }
+ emp->blink_policy = val;
+ return 0;
+}
+
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ /* display the saved value of activity behavior for this
+ * disk.
+ */
+ return sprintf(buf, "%d\n", emp->blink_policy);
+}
+
+static void ahci_port_clear_pending_irq(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+
+ /* clear SError */
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ dev_dbg(ap->host->dev, "PORT_SCR_ERR 0x%x\n", tmp);
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
+ /* clear port IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ dev_dbg(ap->host->dev, "PORT_IRQ_STAT 0x%x\n", tmp);
+ if (tmp)
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+ writel(1 << ap->port_no, hpriv->mmio + HOST_IRQ_STAT);
+}
+
+static void ahci_port_init(struct device *dev, struct ata_port *ap,
+ int port_no, void __iomem *mmio,
+ void __iomem *port_mmio)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ const char *emsg = NULL;
+ int rc;
+ u32 tmp;
+
+ /* make sure port is not active */
+ rc = ahci_deinit_port(ap, &emsg);
+ if (rc)
+ dev_warn(dev, "%s (%d)\n", emsg, rc);
+
+ ahci_port_clear_pending_irq(ap);
+
+ /* mark esata ports */
+ tmp = readl(port_mmio + PORT_CMD);
+ if ((tmp & PORT_CMD_ESP) && (hpriv->cap & HOST_CAP_SXS))
+ ap->pflags |= ATA_PFLAG_EXTERNAL;
+}
+
+void ahci_init_controller(struct ata_host *host)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ int i;
+ void __iomem *port_mmio;
+ u32 tmp;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ port_mmio = ahci_port_base(ap);
+ if (ata_port_is_dummy(ap))
+ continue;
+
+ ahci_port_init(host->dev, ap, i, mmio, port_mmio);
+ }
+
+ tmp = readl(mmio + HOST_CTL);
+ dev_dbg(host->dev, "HOST_CTL 0x%x\n", tmp);
+ writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
+ tmp = readl(mmio + HOST_CTL);
+ dev_dbg(host->dev, "HOST_CTL 0x%x\n", tmp);
+}
+EXPORT_SYMBOL_GPL(ahci_init_controller);
+
+static void ahci_dev_config(struct ata_device *dev)
+{
+ struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
+
+ if (hpriv->flags & AHCI_HFLAG_SECT255) {
+ dev->max_sectors = 255;
+ ata_dev_info(dev,
+ "SB600 AHCI: limiting to 255 sectors per cmd\n");
+ }
+}
+
+unsigned int ahci_dev_classify(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ata_taskfile tf;
+ u32 tmp;
+
+ tmp = readl(port_mmio + PORT_SIG);
+ tf.lbah = (tmp >> 24) & 0xff;
+ tf.lbam = (tmp >> 16) & 0xff;
+ tf.lbal = (tmp >> 8) & 0xff;
+ tf.nsect = (tmp) & 0xff;
+
+ return ata_port_classify(ap, &tf);
+}
+EXPORT_SYMBOL_GPL(ahci_dev_classify);
+
+void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
+ u32 opts)
+{
+ dma_addr_t cmd_tbl_dma;
+
+ cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
+
+ pp->cmd_slot[tag].opts = cpu_to_le32(opts);
+ pp->cmd_slot[tag].status = 0;
+ pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
+ pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
+}
+EXPORT_SYMBOL_GPL(ahci_fill_cmd_slot);
+
+int ahci_kick_engine(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 tmp;
+ int busy, rc;
+
+ /* stop engine */
+ rc = hpriv->stop_engine(ap);
+ if (rc)
+ goto out_restart;
+
+ /* need to do CLO?
+ * always do CLO if PMP is attached (AHCI-1.3 9.2)
+ */
+ busy = status & (ATA_BUSY | ATA_DRQ);
+ if (!busy && !sata_pmp_attached(ap)) {
+ rc = 0;
+ goto out_restart;
+ }
+
+ if (!(hpriv->cap & HOST_CAP_CLO)) {
+ rc = -EOPNOTSUPP;
+ goto out_restart;
+ }
+
+ /* perform CLO */
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_CLO;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ rc = 0;
+ tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
+ PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
+ if (tmp & PORT_CMD_CLO)
+ rc = -EIO;
+
+ /* restart engine */
+ out_restart:
+ hpriv->start_engine(ap);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_kick_engine);
+
+static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
+ struct ata_taskfile *tf, int is_cmd, u16 flags,
+ unsigned long timeout_msec)
+{
+ const u32 cmd_fis_len = 5; /* five dwords */
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u8 *fis = pp->cmd_tbl;
+ u32 tmp;
+
+ /* prep the command */
+ ata_tf_to_fis(tf, pmp, is_cmd, fis);
+ ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
+
+ /* set port value for softreset of Port Multiplier */
+ if (pp->fbs_enabled && pp->fbs_last_dev != pmp) {
+ tmp = readl(port_mmio + PORT_FBS);
+ tmp &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
+ tmp |= pmp << PORT_FBS_DEV_OFFSET;
+ writel(tmp, port_mmio + PORT_FBS);
+ pp->fbs_last_dev = pmp;
+ }
+
+ /* issue & wait */
+ writel(1, port_mmio + PORT_CMD_ISSUE);
+
+ if (timeout_msec) {
+ tmp = ata_wait_register(ap, port_mmio + PORT_CMD_ISSUE,
+ 0x1, 0x1, 1, timeout_msec);
+ if (tmp & 0x1) {
+ ahci_kick_engine(ap);
+ return -EBUSY;
+ }
+ } else
+ readl(port_mmio + PORT_CMD_ISSUE); /* flush */
+
+ return 0;
+}
+
+int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ const char *reason = NULL;
+ unsigned long now, msecs;
+ struct ata_taskfile tf;
+ bool fbs_disabled = false;
+ int rc;
+
+ /* prepare for SRST (AHCI-1.1 10.4.1) */
+ rc = ahci_kick_engine(ap);
+ if (rc && rc != -EOPNOTSUPP)
+ ata_link_warn(link, "failed to reset engine (errno=%d)\n", rc);
+
+ /*
+ * According to AHCI-1.2 9.3.9: if FBS is enable, software shall
+ * clear PxFBS.EN to '0' prior to issuing software reset to devices
+ * that is attached to port multiplier.
+ */
+ if (!ata_is_host_link(link) && pp->fbs_enabled) {
+ ahci_disable_fbs(ap);
+ fbs_disabled = true;
+ }
+
+ ata_tf_init(link->device, &tf);
+
+ /* issue the first H2D Register FIS */
+ msecs = 0;
+ now = jiffies;
+ if (time_after(deadline, now))
+ msecs = jiffies_to_msecs(deadline - now);
+
+ tf.ctl |= ATA_SRST;
+ if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
+ AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
+ rc = -EIO;
+ reason = "1st FIS failed";
+ goto fail;
+ }
+
+ /* spec says at least 5us, but be generous and sleep for 1ms */
+ ata_msleep(ap, 1);
+
+ /* issue the second H2D Register FIS */
+ tf.ctl &= ~ATA_SRST;
+ ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
+
+ /* wait for link to become ready */
+ rc = ata_wait_after_reset(link, deadline, check_ready);
+ if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+ /*
+ * Workaround for cases where link online status can't
+ * be trusted. Treat device readiness timeout as link
+ * offline.
+ */
+ ata_link_info(link, "device not ready, treating as offline\n");
+ *class = ATA_DEV_NONE;
+ } else if (rc) {
+ /* link occupied, -ENODEV too is an error */
+ reason = "device not ready";
+ goto fail;
+ } else
+ *class = ahci_dev_classify(ap);
+
+ /* re-enable FBS if disabled before */
+ if (fbs_disabled)
+ ahci_enable_fbs(ap);
+
+ return 0;
+
+ fail:
+ ata_link_err(link, "softreset failed (%s)\n", reason);
+ return rc;
+}
+
+int ahci_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+
+ return ata_check_ready(status);
+}
+EXPORT_SYMBOL_GPL(ahci_check_ready);
+
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+
+ return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+}
+EXPORT_SYMBOL_GPL(ahci_do_softreset);
+
+static int ahci_bad_pmp_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
+
+ /*
+ * There is no need to check TFDATA if BAD PMP is found due to HW bug,
+ * which can save timeout delay.
+ */
+ if (irq_status & PORT_IRQ_BAD_PMP)
+ return -EIO;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_pmp_retry_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ int pmp = sata_srst_pmp(link);
+ int rc;
+ u32 irq_sts;
+
+ rc = ahci_do_softreset(link, class, pmp, deadline,
+ ahci_bad_pmp_check_ready);
+
+ /*
+ * Soft reset fails with IPMS set when PMP is enabled but
+ * SATA HDD/ODD is connected to SATA port, do soft reset
+ * again to port 0.
+ */
+ if (rc == -EIO) {
+ irq_sts = readl(port_mmio + PORT_IRQ_STAT);
+ if (irq_sts & PORT_IRQ_BAD_PMP) {
+ ata_link_warn(link,
+ "applying PMP SRST workaround "
+ "and retrying\n");
+ rc = ahci_do_softreset(link, class, 0, deadline,
+ ahci_check_ready);
+ }
+ }
+
+ return rc;
+}
+
+int ahci_do_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline, bool *online)
+{
+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+ struct ata_taskfile tf;
+ int rc;
+
+ hpriv->stop_engine(ap);
+
+ /* clear D2H reception area to properly wait for D2H FIS */
+ ata_tf_init(link->device, &tf);
+ tf.status = ATA_BUSY;
+ ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+ ahci_port_clear_pending_irq(ap);
+
+ rc = sata_link_hardreset(link, timing, deadline, online,
+ ahci_check_ready);
+
+ hpriv->start_engine(ap);
+
+ if (*online)
+ *class = ahci_dev_classify(ap);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_do_hardreset);
+
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ bool online;
+
+ return ahci_do_hardreset(link, class, deadline, &online);
+}
+
+static void ahci_postreset(struct ata_link *link, unsigned int *class)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 new_tmp, tmp;
+
+ ata_std_postreset(link, class);
+
+ /* Make sure port's ATAPI bit is set appropriately */
+ new_tmp = tmp = readl(port_mmio + PORT_CMD);
+ if (*class == ATA_DEV_ATAPI)
+ new_tmp |= PORT_CMD_ATAPI;
+ else
+ new_tmp &= ~PORT_CMD_ATAPI;
+ if (new_tmp != tmp) {
+ writel(new_tmp, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+ }
+}
+
+static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
+{
+ struct scatterlist *sg;
+ struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
+ unsigned int si;
+
+ /*
+ * Next, the S/G list.
+ */
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ dma_addr_t addr = sg_dma_address(sg);
+ u32 sg_len = sg_dma_len(sg);
+
+ ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
+ ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
+ }
+
+ return si;
+}
+
+static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+
+ if (!sata_pmp_attached(ap) || pp->fbs_enabled)
+ return ata_std_qc_defer(qc);
+ else
+ return sata_pmp_qc_defer_cmd_switch(qc);
+}
+
+static enum ata_completion_errors ahci_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ int is_atapi = ata_is_atapi(qc->tf.protocol);
+ void *cmd_tbl;
+ u32 opts;
+ const u32 cmd_fis_len = 5; /* five dwords */
+ unsigned int n_elem;
+
+ /*
+ * Fill in command table information. First, the header,
+ * a SATA Register - Host to Device command FIS.
+ */
+ cmd_tbl = pp->cmd_tbl + qc->hw_tag * AHCI_CMD_TBL_SZ;
+
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
+ if (is_atapi) {
+ memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
+ memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
+ }
+
+ n_elem = 0;
+ if (qc->flags & ATA_QCFLAG_DMAMAP)
+ n_elem = ahci_fill_sg(qc, cmd_tbl);
+
+ /*
+ * Fill in command slot information.
+ */
+ opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ opts |= AHCI_CMD_WRITE;
+ if (is_atapi)
+ opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
+
+ ahci_fill_cmd_slot(pp, qc->hw_tag, opts);
+
+ return AC_ERR_OK;
+}
+
+static void ahci_fbs_dec_intr(struct ata_port *ap)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs = readl(port_mmio + PORT_FBS);
+ int retries = 3;
+
+ BUG_ON(!pp->fbs_enabled);
+
+ /* time to wait for DEC is not specified by AHCI spec,
+ * add a retry loop for safety.
+ */
+ writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ while ((fbs & PORT_FBS_DEC) && retries--) {
+ udelay(1);
+ fbs = readl(port_mmio + PORT_FBS);
+ }
+
+ if (fbs & PORT_FBS_DEC)
+ dev_err(ap->host->dev, "failed to clear device error\n");
+}
+
+static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_eh_info *host_ehi = &ap->link.eh_info;
+ struct ata_link *link = NULL;
+ struct ata_queued_cmd *active_qc;
+ struct ata_eh_info *active_ehi;
+ bool fbs_need_dec = false;
+ u32 serror;
+
+ /* determine active link with error */
+ if (pp->fbs_enabled) {
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs = readl(port_mmio + PORT_FBS);
+ int pmp = fbs >> PORT_FBS_DWE_OFFSET;
+
+ if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links)) {
+ link = &ap->pmp_link[pmp];
+ fbs_need_dec = true;
+ }
+
+ } else
+ ata_for_each_link(link, ap, EDGE)
+ if (ata_link_active(link))
+ break;
+
+ if (!link)
+ link = &ap->link;
+
+ active_qc = ata_qc_from_tag(ap, link->active_tag);
+ active_ehi = &link->eh_info;
+
+ /* record irq stat */
+ ata_ehi_clear_desc(host_ehi);
+ ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
+
+ /* AHCI needs SError cleared; otherwise, it might lock up */
+ ahci_scr_read(&ap->link, SCR_ERROR, &serror);
+ ahci_scr_write(&ap->link, SCR_ERROR, serror);
+ host_ehi->serror |= serror;
+
+ /* some controllers set IRQ_IF_ERR on device errors, ignore it */
+ if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
+ irq_stat &= ~PORT_IRQ_IF_ERR;
+
+ if (irq_stat & PORT_IRQ_TF_ERR) {
+ /* If qc is active, charge it; otherwise, the active
+ * link. There's no active qc on NCQ errors. It will
+ * be determined by EH by reading log page 10h.
+ */
+ if (active_qc)
+ active_qc->err_mask |= AC_ERR_DEV;
+ else
+ active_ehi->err_mask |= AC_ERR_DEV;
+
+ if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
+ host_ehi->serror &= ~SERR_INTERNAL;
+ }
+
+ if (irq_stat & PORT_IRQ_UNK_FIS) {
+ u32 *unk = pp->rx_fis + RX_FIS_UNK;
+
+ active_ehi->err_mask |= AC_ERR_HSM;
+ active_ehi->action |= ATA_EH_RESET;
+ ata_ehi_push_desc(active_ehi,
+ "unknown FIS %08x %08x %08x %08x" ,
+ unk[0], unk[1], unk[2], unk[3]);
+ }
+
+ if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
+ active_ehi->err_mask |= AC_ERR_HSM;
+ active_ehi->action |= ATA_EH_RESET;
+ ata_ehi_push_desc(active_ehi, "incorrect PMP");
+ }
+
+ if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
+ host_ehi->err_mask |= AC_ERR_HOST_BUS;
+ host_ehi->action |= ATA_EH_RESET;
+ ata_ehi_push_desc(host_ehi, "host bus error");
+ }
+
+ if (irq_stat & PORT_IRQ_IF_ERR) {
+ if (fbs_need_dec)
+ active_ehi->err_mask |= AC_ERR_DEV;
+ else {
+ host_ehi->err_mask |= AC_ERR_ATA_BUS;
+ host_ehi->action |= ATA_EH_RESET;
+ }
+
+ ata_ehi_push_desc(host_ehi, "interface fatal error");
+ }
+
+ if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
+ ata_ehi_hotplugged(host_ehi);
+ ata_ehi_push_desc(host_ehi, "%s",
+ irq_stat & PORT_IRQ_CONNECT ?
+ "connection status changed" : "PHY RDY changed");
+ }
+
+ /* okay, let's hand over to EH */
+
+ if (irq_stat & PORT_IRQ_FREEZE)
+ ata_port_freeze(ap);
+ else if (fbs_need_dec) {
+ ata_link_abort(link);
+ ahci_fbs_dec_intr(ap);
+ } else
+ ata_port_abort(ap);
+}
+
+static void ahci_handle_port_interrupt(struct ata_port *ap,
+ void __iomem *port_mmio, u32 status)
+{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
+ u32 qc_active = 0;
+ int rc;
+
+ /* ignore BAD_PMP while resetting */
+ if (unlikely(resetting))
+ status &= ~PORT_IRQ_BAD_PMP;
+
+ if (sata_lpm_ignore_phy_events(&ap->link)) {
+ status &= ~PORT_IRQ_PHYRDY;
+ ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG);
+ }
+
+ if (unlikely(status & PORT_IRQ_ERROR)) {
+ ahci_error_intr(ap, status);
+ return;
+ }
+
+ if (status & PORT_IRQ_SDB_FIS) {
+ /* If SNotification is available, leave notification
+ * handling to sata_async_notification(). If not,
+ * emulate it by snooping SDB FIS RX area.
+ *
+ * Snooping FIS RX area is probably cheaper than
+ * poking SNotification but some constrollers which
+ * implement SNotification, ICH9 for example, don't
+ * store AN SDB FIS into receive area.
+ */
+ if (hpriv->cap & HOST_CAP_SNTF)
+ sata_async_notification(ap);
+ else {
+ /* If the 'N' bit in word 0 of the FIS is set,
+ * we just received asynchronous notification.
+ * Tell libata about it.
+ *
+ * Lack of SNotification should not appear in
+ * ahci 1.2, so the workaround is unnecessary
+ * when FBS is enabled.
+ */
+ if (pp->fbs_enabled)
+ WARN_ON_ONCE(1);
+ else {
+ const __le32 *f = pp->rx_fis + RX_FIS_SDB;
+ u32 f0 = le32_to_cpu(f[0]);
+ if (f0 & (1 << 15))
+ sata_async_notification(ap);
+ }
+ }
+ }
+
+ /* pp->active_link is not reliable once FBS is enabled, both
+ * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because
+ * NCQ and non-NCQ commands may be in flight at the same time.
+ */
+ if (pp->fbs_enabled) {
+ if (ap->qc_active) {
+ qc_active = readl(port_mmio + PORT_SCR_ACT);
+ qc_active |= readl(port_mmio + PORT_CMD_ISSUE);
+ }
+ } else {
+ /* pp->active_link is valid iff any command is in flight */
+ if (ap->qc_active && pp->active_link->sactive)
+ qc_active = readl(port_mmio + PORT_SCR_ACT);
+ else
+ qc_active = readl(port_mmio + PORT_CMD_ISSUE);
+ }
+
+
+ rc = ata_qc_complete_multiple(ap, qc_active);
+
+ /* while resetting, invalid completions are expected */
+ if (unlikely(rc < 0 && !resetting)) {
+ ehi->err_mask |= AC_ERR_HSM;
+ ehi->action |= ATA_EH_RESET;
+ ata_port_freeze(ap);
+ }
+}
+
+static void ahci_port_intr(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 status;
+
+ status = readl(port_mmio + PORT_IRQ_STAT);
+ writel(status, port_mmio + PORT_IRQ_STAT);
+
+ ahci_handle_port_interrupt(ap, port_mmio, status);
+}
+
+static irqreturn_t ahci_multi_irqs_intr_hard(int irq, void *dev_instance)
+{
+ struct ata_port *ap = dev_instance;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 status;
+
+ status = readl(port_mmio + PORT_IRQ_STAT);
+ writel(status, port_mmio + PORT_IRQ_STAT);
+
+ spin_lock(ap->lock);
+ ahci_handle_port_interrupt(ap, port_mmio, status);
+ spin_unlock(ap->lock);
+
+ return IRQ_HANDLED;
+}
+
+u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked)
+{
+ unsigned int i, handled = 0;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap;
+
+ if (!(irq_masked & (1 << i)))
+ continue;
+
+ ap = host->ports[i];
+ if (ap) {
+ ahci_port_intr(ap);
+ } else {
+ if (ata_ratelimit())
+ dev_warn(host->dev,
+ "interrupt on disabled port %u\n", i);
+ }
+
+ handled = 1;
+ }
+
+ return handled;
+}
+EXPORT_SYMBOL_GPL(ahci_handle_port_intr);
+
+static irqreturn_t ahci_single_level_irq_intr(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ struct ahci_host_priv *hpriv;
+ unsigned int rc = 0;
+ void __iomem *mmio;
+ u32 irq_stat, irq_masked;
+
+ hpriv = host->private_data;
+ mmio = hpriv->mmio;
+
+ /* sigh. 0xffffffff is a valid return from h/w */
+ irq_stat = readl(mmio + HOST_IRQ_STAT);
+ if (!irq_stat)
+ return IRQ_NONE;
+
+ irq_masked = irq_stat & hpriv->port_map;
+
+ spin_lock(&host->lock);
+
+ rc = ahci_handle_port_intr(host, irq_masked);
+
+ /* HOST_IRQ_STAT behaves as level triggered latch meaning that
+ * it should be cleared after all the port events are cleared;
+ * otherwise, it will raise a spurious interrupt after each
+ * valid one. Please read section 10.6.2 of ahci 1.1 for more
+ * information.
+ *
+ * Also, use the unmasked value to clear interrupt as spurious
+ * pending event on a dummy port might cause screaming IRQ.
+ */
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
+
+ spin_unlock(&host->lock);
+
+ return IRQ_RETVAL(rc);
+}
+
+unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* Keep track of the currently active link. It will be used
+ * in completion path to determine whether NCQ phase is in
+ * progress.
+ */
+ pp->active_link = qc->dev->link;
+
+ if (ata_is_ncq(qc->tf.protocol))
+ writel(1 << qc->hw_tag, port_mmio + PORT_SCR_ACT);
+
+ if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
+ u32 fbs = readl(port_mmio + PORT_FBS);
+ fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
+ fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
+ writel(fbs, port_mmio + PORT_FBS);
+ pp->fbs_last_dev = qc->dev->link->pmp;
+ }
+
+ writel(1 << qc->hw_tag, port_mmio + PORT_CMD_ISSUE);
+
+ ahci_sw_activity(qc->dev->link);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_qc_issue);
+
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ struct ahci_port_priv *pp = qc->ap->private_data;
+ u8 *rx_fis = pp->rx_fis;
+
+ if (pp->fbs_enabled)
+ rx_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
+
+ /*
+ * After a successful execution of an ATA PIO data-in command,
+ * the device doesn't send D2H Reg FIS to update the TF and
+ * the host should take TF and E_Status from the preceding PIO
+ * Setup FIS.
+ */
+ if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE &&
+ !(qc->flags & ATA_QCFLAG_FAILED)) {
+ ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf);
+ qc->result_tf.status = (rx_fis + RX_FIS_PIO_SETUP)[15];
+ } else
+ ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf);
+
+ return true;
+}
+
+static void ahci_freeze(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+
+ /* turn IRQ off */
+ writel(0, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_thaw(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 tmp;
+ struct ahci_port_priv *pp = ap->private_data;
+
+ /* clear IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+ writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
+
+ /* turn IRQ back on */
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+void ahci_error_handler(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
+ /* restart engine */
+ hpriv->stop_engine(ap);
+ hpriv->start_engine(ap);
+ }
+
+ sata_pmp_error_handler(ap);
+
+ if (!ata_dev_enabled(ap->link.device))
+ hpriv->stop_engine(ap);
+}
+EXPORT_SYMBOL_GPL(ahci_error_handler);
+
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* make DMA engine forget about the failed command */
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ ahci_kick_engine(ap);
+}
+
+static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ata_device *dev = ap->link.device;
+ u32 devslp, dm, dito, mdat, deto, dito_conf;
+ int rc;
+ unsigned int err_mask;
+
+ devslp = readl(port_mmio + PORT_DEVSLP);
+ if (!(devslp & PORT_DEVSLP_DSP)) {
+ dev_info(ap->host->dev, "port does not support device sleep\n");
+ return;
+ }
+
+ /* disable device sleep */
+ if (!sleep) {
+ if (devslp & PORT_DEVSLP_ADSE) {
+ writel(devslp & ~PORT_DEVSLP_ADSE,
+ port_mmio + PORT_DEVSLP);
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_DISABLE,
+ SATA_DEVSLP);
+ if (err_mask && err_mask != AC_ERR_DEV)
+ ata_dev_warn(dev, "failed to disable DEVSLP\n");
+ }
+ return;
+ }
+
+ dm = (devslp & PORT_DEVSLP_DM_MASK) >> PORT_DEVSLP_DM_OFFSET;
+ dito = devslp_idle_timeout / (dm + 1);
+ if (dito > 0x3ff)
+ dito = 0x3ff;
+
+ dito_conf = (devslp >> PORT_DEVSLP_DITO_OFFSET) & 0x3FF;
+
+ /* device sleep was already enabled and same dito */
+ if ((devslp & PORT_DEVSLP_ADSE) && (dito_conf == dito))
+ return;
+
+ /* set DITO, MDAT, DETO and enable DevSlp, need to stop engine first */
+ rc = hpriv->stop_engine(ap);
+ if (rc)
+ return;
+
+ /* Use the nominal value 10 ms if the read MDAT is zero,
+ * the nominal value of DETO is 20 ms.
+ */
+ if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] &
+ ATA_LOG_DEVSLP_VALID_MASK) {
+ mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] &
+ ATA_LOG_DEVSLP_MDAT_MASK;
+ if (!mdat)
+ mdat = 10;
+ deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO];
+ if (!deto)
+ deto = 20;
+ } else {
+ mdat = 10;
+ deto = 20;
+ }
+
+ /* Make dito, mdat, deto bits to 0s */
+ devslp &= ~GENMASK_ULL(24, 2);
+ devslp |= ((dito << PORT_DEVSLP_DITO_OFFSET) |
+ (mdat << PORT_DEVSLP_MDAT_OFFSET) |
+ (deto << PORT_DEVSLP_DETO_OFFSET) |
+ PORT_DEVSLP_ADSE);
+ writel(devslp, port_mmio + PORT_DEVSLP);
+
+ hpriv->start_engine(ap);
+
+ /* enable device sleep feature for the drive */
+ err_mask = ata_dev_set_feature(dev,
+ SETFEATURES_SATA_ENABLE,
+ SATA_DEVSLP);
+ if (err_mask && err_mask != AC_ERR_DEV)
+ ata_dev_warn(dev, "failed to enable DEVSLP\n");
+}
+
+static void ahci_enable_fbs(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs;
+ int rc;
+
+ if (!pp->fbs_supported)
+ return;
+
+ fbs = readl(port_mmio + PORT_FBS);
+ if (fbs & PORT_FBS_EN) {
+ pp->fbs_enabled = true;
+ pp->fbs_last_dev = -1; /* initialization */
+ return;
+ }
+
+ rc = hpriv->stop_engine(ap);
+ if (rc)
+ return;
+
+ writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ if (fbs & PORT_FBS_EN) {
+ dev_info(ap->host->dev, "FBS is enabled\n");
+ pp->fbs_enabled = true;
+ pp->fbs_last_dev = -1; /* initialization */
+ } else
+ dev_err(ap->host->dev, "Failed to enable FBS\n");
+
+ hpriv->start_engine(ap);
+}
+
+static void ahci_disable_fbs(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs;
+ int rc;
+
+ if (!pp->fbs_supported)
+ return;
+
+ fbs = readl(port_mmio + PORT_FBS);
+ if ((fbs & PORT_FBS_EN) == 0) {
+ pp->fbs_enabled = false;
+ return;
+ }
+
+ rc = hpriv->stop_engine(ap);
+ if (rc)
+ return;
+
+ writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ if (fbs & PORT_FBS_EN)
+ dev_err(ap->host->dev, "Failed to disable FBS\n");
+ else {
+ dev_info(ap->host->dev, "FBS is disabled\n");
+ pp->fbs_enabled = false;
+ }
+
+ hpriv->start_engine(ap);
+}
+
+static void ahci_pmp_attach(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 cmd;
+
+ cmd = readl(port_mmio + PORT_CMD);
+ cmd |= PORT_CMD_PMP;
+ writel(cmd, port_mmio + PORT_CMD);
+
+ ahci_enable_fbs(ap);
+
+ pp->intr_mask |= PORT_IRQ_BAD_PMP;
+
+ /*
+ * We must not change the port interrupt mask register if the
+ * port is marked frozen, the value in pp->intr_mask will be
+ * restored later when the port is thawed.
+ *
+ * Note that during initialization, the port is marked as
+ * frozen since the irq handler is not yet registered.
+ */
+ if (!(ap->pflags & ATA_PFLAG_FROZEN))
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_pmp_detach(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ struct ahci_port_priv *pp = ap->private_data;
+ u32 cmd;
+
+ ahci_disable_fbs(ap);
+
+ cmd = readl(port_mmio + PORT_CMD);
+ cmd &= ~PORT_CMD_PMP;
+ writel(cmd, port_mmio + PORT_CMD);
+
+ pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
+
+ /* see comment above in ahci_pmp_attach() */
+ if (!(ap->pflags & ATA_PFLAG_FROZEN))
+ writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+int ahci_port_resume(struct ata_port *ap)
+{
+ ahci_rpm_get_port(ap);
+
+ ahci_power_up(ap);
+ ahci_start_port(ap);
+
+ if (sata_pmp_attached(ap))
+ ahci_pmp_attach(ap);
+ else
+ ahci_pmp_detach(ap);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_port_resume);
+
+#ifdef CONFIG_PM
+static void ahci_handle_s2idle(struct ata_port *ap)
+{
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 devslp;
+
+ if (pm_suspend_via_firmware())
+ return;
+ devslp = readl(port_mmio + PORT_DEVSLP);
+ if ((devslp & PORT_DEVSLP_ADSE))
+ ata_msleep(ap, devslp_idle_timeout);
+}
+
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
+{
+ const char *emsg = NULL;
+ int rc;
+
+ rc = ahci_deinit_port(ap, &emsg);
+ if (rc == 0)
+ ahci_power_down(ap);
+ else {
+ ata_port_err(ap, "%s (%d)\n", emsg, rc);
+ ata_port_freeze(ap);
+ }
+
+ if (acpi_storage_d3(ap->host->dev))
+ ahci_handle_s2idle(ap);
+
+ ahci_rpm_put_port(ap);
+ return rc;
+}
+#endif
+
+static int ahci_port_start(struct ata_port *ap)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct device *dev = ap->host->dev;
+ struct ahci_port_priv *pp;
+ void *mem;
+ dma_addr_t mem_dma;
+ size_t dma_sz, rx_fis_sz;
+
+ pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
+ if (!pp)
+ return -ENOMEM;
+
+ if (ap->host->n_ports > 1) {
+ pp->irq_desc = devm_kzalloc(dev, 8, GFP_KERNEL);
+ if (!pp->irq_desc) {
+ devm_kfree(dev, pp);
+ return -ENOMEM;
+ }
+ snprintf(pp->irq_desc, 8,
+ "%s%d", dev_driver_string(dev), ap->port_no);
+ }
+
+ /* check FBS capability */
+ if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 cmd = readl(port_mmio + PORT_CMD);
+ if (cmd & PORT_CMD_FBSCP)
+ pp->fbs_supported = true;
+ else if (hpriv->flags & AHCI_HFLAG_YES_FBS) {
+ dev_info(dev, "port %d can do FBS, forcing FBSCP\n",
+ ap->port_no);
+ pp->fbs_supported = true;
+ } else
+ dev_warn(dev, "port %d is not capable of FBS\n",
+ ap->port_no);
+ }
+
+ if (pp->fbs_supported) {
+ dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
+ rx_fis_sz = AHCI_RX_FIS_SZ * 16;
+ } else {
+ dma_sz = AHCI_PORT_PRIV_DMA_SZ;
+ rx_fis_sz = AHCI_RX_FIS_SZ;
+ }
+
+ mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
+ if (!mem)
+ return -ENOMEM;
+
+ /*
+ * First item in chunk of DMA memory: 32-slot command table,
+ * 32 bytes each in size
+ */
+ pp->cmd_slot = mem;
+ pp->cmd_slot_dma = mem_dma;
+
+ mem += AHCI_CMD_SLOT_SZ;
+ mem_dma += AHCI_CMD_SLOT_SZ;
+
+ /*
+ * Second item: Received-FIS area
+ */
+ pp->rx_fis = mem;
+ pp->rx_fis_dma = mem_dma;
+
+ mem += rx_fis_sz;
+ mem_dma += rx_fis_sz;
+
+ /*
+ * Third item: data area for storing a single command
+ * and its scatter-gather table
+ */
+ pp->cmd_tbl = mem;
+ pp->cmd_tbl_dma = mem_dma;
+
+ /*
+ * Save off initial list of interrupts to be enabled.
+ * This could be changed later
+ */
+ pp->intr_mask = DEF_PORT_IRQ;
+
+ /*
+ * Switch to per-port locking in case each port has its own MSI vector.
+ */
+ if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) {
+ spin_lock_init(&pp->lock);
+ ap->lock = &pp->lock;
+ }
+
+ ap->private_data = pp;
+
+ /* engage engines, captain */
+ return ahci_port_resume(ap);
+}
+
+static void ahci_port_stop(struct ata_port *ap)
+{
+ const char *emsg = NULL;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ void __iomem *host_mmio = hpriv->mmio;
+ int rc;
+
+ /* de-initialize port */
+ rc = ahci_deinit_port(ap, &emsg);
+ if (rc)
+ ata_port_warn(ap, "%s (%d)\n", emsg, rc);
+
+ /*
+ * Clear GHC.IS to prevent stuck INTx after disabling MSI and
+ * re-enabling INTx.
+ */
+ writel(1 << ap->port_no, host_mmio + HOST_IRQ_STAT);
+
+ ahci_rpm_put_port(ap);
+}
+
+void ahci_print_info(struct ata_host *host, const char *scc_s)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ u32 vers, cap, cap2, impl, speed;
+ const char *speed_s;
+
+ vers = hpriv->version;
+ cap = hpriv->cap;
+ cap2 = hpriv->cap2;
+ impl = hpriv->port_map;
+
+ speed = (cap >> 20) & 0xf;
+ if (speed == 1)
+ speed_s = "1.5";
+ else if (speed == 2)
+ speed_s = "3";
+ else if (speed == 3)
+ speed_s = "6";
+ else
+ speed_s = "?";
+
+ dev_info(host->dev,
+ "AHCI %02x%02x.%02x%02x "
+ "%u slots %u ports %s Gbps 0x%x impl %s mode\n"
+ ,
+
+ (vers >> 24) & 0xff,
+ (vers >> 16) & 0xff,
+ (vers >> 8) & 0xff,
+ vers & 0xff,
+
+ ((cap >> 8) & 0x1f) + 1,
+ (cap & 0x1f) + 1,
+ speed_s,
+ impl,
+ scc_s);
+
+ dev_info(host->dev,
+ "flags: "
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s"
+ "%s%s%s%s%s%s%s"
+ "%s%s\n"
+ ,
+
+ cap & HOST_CAP_64 ? "64bit " : "",
+ cap & HOST_CAP_NCQ ? "ncq " : "",
+ cap & HOST_CAP_SNTF ? "sntf " : "",
+ cap & HOST_CAP_MPS ? "ilck " : "",
+ cap & HOST_CAP_SSS ? "stag " : "",
+ cap & HOST_CAP_ALPM ? "pm " : "",
+ cap & HOST_CAP_LED ? "led " : "",
+ cap & HOST_CAP_CLO ? "clo " : "",
+ cap & HOST_CAP_ONLY ? "only " : "",
+ cap & HOST_CAP_PMP ? "pmp " : "",
+ cap & HOST_CAP_FBS ? "fbs " : "",
+ cap & HOST_CAP_PIO_MULTI ? "pio " : "",
+ cap & HOST_CAP_SSC ? "slum " : "",
+ cap & HOST_CAP_PART ? "part " : "",
+ cap & HOST_CAP_CCC ? "ccc " : "",
+ cap & HOST_CAP_EMS ? "ems " : "",
+ cap & HOST_CAP_SXS ? "sxs " : "",
+ cap2 & HOST_CAP2_DESO ? "deso " : "",
+ cap2 & HOST_CAP2_SADM ? "sadm " : "",
+ cap2 & HOST_CAP2_SDS ? "sds " : "",
+ cap2 & HOST_CAP2_APST ? "apst " : "",
+ cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
+ cap2 & HOST_CAP2_BOH ? "boh " : ""
+ );
+}
+EXPORT_SYMBOL_GPL(ahci_print_info);
+
+void ahci_set_em_messages(struct ahci_host_priv *hpriv,
+ struct ata_port_info *pi)
+{
+ u8 messages;
+ void __iomem *mmio = hpriv->mmio;
+ u32 em_loc = readl(mmio + HOST_EM_LOC);
+ u32 em_ctl = readl(mmio + HOST_EM_CTL);
+
+ if (!ahci_em_messages || !(hpriv->cap & HOST_CAP_EMS))
+ return;
+
+ messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
+
+ if (messages) {
+ /* store em_loc */
+ hpriv->em_loc = ((em_loc >> 16) * 4);
+ hpriv->em_buf_sz = ((em_loc & 0xff) * 4);
+ hpriv->em_msg_type = messages;
+ pi->flags |= ATA_FLAG_EM;
+ if (!(em_ctl & EM_CTL_ALHD))
+ pi->flags |= ATA_FLAG_SW_ACTIVITY;
+ }
+}
+EXPORT_SYMBOL_GPL(ahci_set_em_messages);
+
+static int ahci_host_activate_multi_irqs(struct ata_host *host,
+ struct scsi_host_template *sht)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ int i, rc;
+
+ rc = ata_host_start(host);
+ if (rc)
+ return rc;
+ /*
+ * Requests IRQs according to AHCI-1.1 when multiple MSIs were
+ * allocated. That is one MSI per port, starting from @irq.
+ */
+ for (i = 0; i < host->n_ports; i++) {
+ struct ahci_port_priv *pp = host->ports[i]->private_data;
+ int irq = hpriv->get_irq_vector(host, i);
+
+ /* Do not receive interrupts sent by dummy ports */
+ if (!pp) {
+ disable_irq(irq);
+ continue;
+ }
+
+ rc = devm_request_irq(host->dev, irq, ahci_multi_irqs_intr_hard,
+ 0, pp->irq_desc, host->ports[i]);
+
+ if (rc)
+ return rc;
+ ata_port_desc(host->ports[i], "irq %d", irq);
+ }
+
+ return ata_host_register(host, sht);
+}
+
+/**
+ * ahci_host_activate - start AHCI host, request IRQs and register it
+ * @host: target ATA host
+ * @sht: scsi_host_template to use when registering the host
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht)
+{
+ struct ahci_host_priv *hpriv = host->private_data;
+ int irq = hpriv->irq;
+ int rc;
+
+ if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) {
+ if (hpriv->irq_handler &&
+ hpriv->irq_handler != ahci_single_level_irq_intr)
+ dev_warn(host->dev,
+ "both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented\n");
+ if (!hpriv->get_irq_vector) {
+ dev_err(host->dev,
+ "AHCI_HFLAG_MULTI_MSI requires ->get_irq_vector!\n");
+ return -EIO;
+ }
+
+ rc = ahci_host_activate_multi_irqs(host, sht);
+ } else {
+ rc = ata_host_activate(host, irq, hpriv->irq_handler,
+ IRQF_SHARED, sht);
+ }
+
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_host_activate);
+
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_DESCRIPTION("Common AHCI SATA low-level routines");
+MODULE_LICENSE("GPL");