diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/clk/clk-k210.c | 1008 |
1 files changed, 1008 insertions, 0 deletions
diff --git a/drivers/clk/clk-k210.c b/drivers/clk/clk-k210.c new file mode 100644 index 000000000..67a7cb350 --- /dev/null +++ b/drivers/clk/clk-k210.c @@ -0,0 +1,1008 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com> + * Copyright (c) 2019 Western Digital Corporation or its affiliates. + */ +#define pr_fmt(fmt) "k210-clk: " fmt + +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_clk.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/clk-provider.h> +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <soc/canaan/k210-sysctl.h> + +#include <dt-bindings/clock/k210-clk.h> + +struct k210_sysclk; + +struct k210_clk { + int id; + struct k210_sysclk *ksc; + struct clk_hw hw; +}; + +struct k210_clk_cfg { + const char *name; + u8 gate_reg; + u8 gate_bit; + u8 div_reg; + u8 div_shift; + u8 div_width; + u8 div_type; + u8 mux_reg; + u8 mux_bit; +}; + +enum k210_clk_div_type { + K210_DIV_NONE, + K210_DIV_ONE_BASED, + K210_DIV_DOUBLE_ONE_BASED, + K210_DIV_POWER_OF_TWO, +}; + +#define K210_GATE(_reg, _bit) \ + .gate_reg = (_reg), \ + .gate_bit = (_bit) + +#define K210_DIV(_reg, _shift, _width, _type) \ + .div_reg = (_reg), \ + .div_shift = (_shift), \ + .div_width = (_width), \ + .div_type = (_type) + +#define K210_MUX(_reg, _bit) \ + .mux_reg = (_reg), \ + .mux_bit = (_bit) + +static struct k210_clk_cfg k210_clk_cfgs[K210_NUM_CLKS] = { + /* Gated clocks, no mux, no divider */ + [K210_CLK_CPU] = { + .name = "cpu", + K210_GATE(K210_SYSCTL_EN_CENT, 0) + }, + [K210_CLK_DMA] = { + .name = "dma", + K210_GATE(K210_SYSCTL_EN_PERI, 1) + }, + [K210_CLK_FFT] = { + .name = "fft", + K210_GATE(K210_SYSCTL_EN_PERI, 4) + }, + [K210_CLK_GPIO] = { + .name = "gpio", + K210_GATE(K210_SYSCTL_EN_PERI, 5) + }, + [K210_CLK_UART1] = { + .name = "uart1", + K210_GATE(K210_SYSCTL_EN_PERI, 16) + }, + [K210_CLK_UART2] = { + .name = "uart2", + K210_GATE(K210_SYSCTL_EN_PERI, 17) + }, + [K210_CLK_UART3] = { + .name = "uart3", + K210_GATE(K210_SYSCTL_EN_PERI, 18) + }, + [K210_CLK_FPIOA] = { + .name = "fpioa", + K210_GATE(K210_SYSCTL_EN_PERI, 20) + }, + [K210_CLK_SHA] = { + .name = "sha", + K210_GATE(K210_SYSCTL_EN_PERI, 26) + }, + [K210_CLK_AES] = { + .name = "aes", + K210_GATE(K210_SYSCTL_EN_PERI, 19) + }, + [K210_CLK_OTP] = { + .name = "otp", + K210_GATE(K210_SYSCTL_EN_PERI, 27) + }, + [K210_CLK_RTC] = { + .name = "rtc", + K210_GATE(K210_SYSCTL_EN_PERI, 29) + }, + + /* Gated divider clocks */ + [K210_CLK_SRAM0] = { + .name = "sram0", + K210_GATE(K210_SYSCTL_EN_CENT, 1), + K210_DIV(K210_SYSCTL_THR0, 0, 4, K210_DIV_ONE_BASED) + }, + [K210_CLK_SRAM1] = { + .name = "sram1", + K210_GATE(K210_SYSCTL_EN_CENT, 2), + K210_DIV(K210_SYSCTL_THR0, 4, 4, K210_DIV_ONE_BASED) + }, + [K210_CLK_ROM] = { + .name = "rom", + K210_GATE(K210_SYSCTL_EN_PERI, 0), + K210_DIV(K210_SYSCTL_THR0, 16, 4, K210_DIV_ONE_BASED) + }, + [K210_CLK_DVP] = { + .name = "dvp", + K210_GATE(K210_SYSCTL_EN_PERI, 3), + K210_DIV(K210_SYSCTL_THR0, 12, 4, K210_DIV_ONE_BASED) + }, + [K210_CLK_APB0] = { + .name = "apb0", + K210_GATE(K210_SYSCTL_EN_CENT, 3), + K210_DIV(K210_SYSCTL_SEL0, 3, 3, K210_DIV_ONE_BASED) + }, + [K210_CLK_APB1] = { + .name = "apb1", + K210_GATE(K210_SYSCTL_EN_CENT, 4), + K210_DIV(K210_SYSCTL_SEL0, 6, 3, K210_DIV_ONE_BASED) + }, + [K210_CLK_APB2] = { + .name = "apb2", + K210_GATE(K210_SYSCTL_EN_CENT, 5), + K210_DIV(K210_SYSCTL_SEL0, 9, 3, K210_DIV_ONE_BASED) + }, + [K210_CLK_AI] = { + .name = "ai", + K210_GATE(K210_SYSCTL_EN_PERI, 2), + K210_DIV(K210_SYSCTL_THR0, 8, 4, K210_DIV_ONE_BASED) + }, + [K210_CLK_SPI0] = { + .name = "spi0", + K210_GATE(K210_SYSCTL_EN_PERI, 6), + K210_DIV(K210_SYSCTL_THR1, 0, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_SPI1] = { + .name = "spi1", + K210_GATE(K210_SYSCTL_EN_PERI, 7), + K210_DIV(K210_SYSCTL_THR1, 8, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_SPI2] = { + .name = "spi2", + K210_GATE(K210_SYSCTL_EN_PERI, 8), + K210_DIV(K210_SYSCTL_THR1, 16, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_I2C0] = { + .name = "i2c0", + K210_GATE(K210_SYSCTL_EN_PERI, 13), + K210_DIV(K210_SYSCTL_THR5, 8, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_I2C1] = { + .name = "i2c1", + K210_GATE(K210_SYSCTL_EN_PERI, 14), + K210_DIV(K210_SYSCTL_THR5, 16, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_I2C2] = { + .name = "i2c2", + K210_GATE(K210_SYSCTL_EN_PERI, 15), + K210_DIV(K210_SYSCTL_THR5, 24, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_WDT0] = { + .name = "wdt0", + K210_GATE(K210_SYSCTL_EN_PERI, 24), + K210_DIV(K210_SYSCTL_THR6, 0, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_WDT1] = { + .name = "wdt1", + K210_GATE(K210_SYSCTL_EN_PERI, 25), + K210_DIV(K210_SYSCTL_THR6, 8, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_I2S0] = { + .name = "i2s0", + K210_GATE(K210_SYSCTL_EN_PERI, 10), + K210_DIV(K210_SYSCTL_THR3, 0, 16, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_I2S1] = { + .name = "i2s1", + K210_GATE(K210_SYSCTL_EN_PERI, 11), + K210_DIV(K210_SYSCTL_THR3, 16, 16, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_I2S2] = { + .name = "i2s2", + K210_GATE(K210_SYSCTL_EN_PERI, 12), + K210_DIV(K210_SYSCTL_THR4, 0, 16, K210_DIV_DOUBLE_ONE_BASED) + }, + + /* Divider clocks, no gate, no mux */ + [K210_CLK_I2S0_M] = { + .name = "i2s0_m", + K210_DIV(K210_SYSCTL_THR4, 16, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_I2S1_M] = { + .name = "i2s1_m", + K210_DIV(K210_SYSCTL_THR4, 24, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + [K210_CLK_I2S2_M] = { + .name = "i2s2_m", + K210_DIV(K210_SYSCTL_THR4, 0, 8, K210_DIV_DOUBLE_ONE_BASED) + }, + + /* Muxed gated divider clocks */ + [K210_CLK_SPI3] = { + .name = "spi3", + K210_GATE(K210_SYSCTL_EN_PERI, 9), + K210_DIV(K210_SYSCTL_THR1, 24, 8, K210_DIV_DOUBLE_ONE_BASED), + K210_MUX(K210_SYSCTL_SEL0, 12) + }, + [K210_CLK_TIMER0] = { + .name = "timer0", + K210_GATE(K210_SYSCTL_EN_PERI, 21), + K210_DIV(K210_SYSCTL_THR2, 0, 8, K210_DIV_DOUBLE_ONE_BASED), + K210_MUX(K210_SYSCTL_SEL0, 13) + }, + [K210_CLK_TIMER1] = { + .name = "timer1", + K210_GATE(K210_SYSCTL_EN_PERI, 22), + K210_DIV(K210_SYSCTL_THR2, 8, 8, K210_DIV_DOUBLE_ONE_BASED), + K210_MUX(K210_SYSCTL_SEL0, 14) + }, + [K210_CLK_TIMER2] = { + .name = "timer2", + K210_GATE(K210_SYSCTL_EN_PERI, 23), + K210_DIV(K210_SYSCTL_THR2, 16, 8, K210_DIV_DOUBLE_ONE_BASED), + K210_MUX(K210_SYSCTL_SEL0, 15) + }, +}; + +/* + * PLL control register bits. + */ +#define K210_PLL_CLKR GENMASK(3, 0) +#define K210_PLL_CLKF GENMASK(9, 4) +#define K210_PLL_CLKOD GENMASK(13, 10) +#define K210_PLL_BWADJ GENMASK(19, 14) +#define K210_PLL_RESET (1 << 20) +#define K210_PLL_PWRD (1 << 21) +#define K210_PLL_INTFB (1 << 22) +#define K210_PLL_BYPASS (1 << 23) +#define K210_PLL_TEST (1 << 24) +#define K210_PLL_EN (1 << 25) +#define K210_PLL_SEL GENMASK(27, 26) /* PLL2 only */ + +/* + * PLL lock register bits. + */ +#define K210_PLL_LOCK 0 +#define K210_PLL_CLEAR_SLIP 2 +#define K210_PLL_TEST_OUT 3 + +/* + * Clock selector register bits. + */ +#define K210_ACLK_SEL BIT(0) +#define K210_ACLK_DIV GENMASK(2, 1) + +/* + * PLLs. + */ +enum k210_pll_id { + K210_PLL0, K210_PLL1, K210_PLL2, K210_PLL_NUM +}; + +struct k210_pll { + enum k210_pll_id id; + struct k210_sysclk *ksc; + void __iomem *base; + void __iomem *reg; + void __iomem *lock; + u8 lock_shift; + u8 lock_width; + struct clk_hw hw; +}; +#define to_k210_pll(_hw) container_of(_hw, struct k210_pll, hw) + +/* + * PLLs configuration: by default PLL0 runs at 780 MHz and PLL1 at 299 MHz. + * The first 2 SRAM banks depend on ACLK/CPU clock which is by default PLL0 + * rate divided by 2. Set PLL1 to 390 MHz so that the third SRAM bank has the + * same clock as the first 2. + */ +struct k210_pll_cfg { + u32 reg; + u8 lock_shift; + u8 lock_width; + u32 r; + u32 f; + u32 od; + u32 bwadj; +}; + +static struct k210_pll_cfg k210_plls_cfg[] = { + { K210_SYSCTL_PLL0, 0, 2, 0, 59, 1, 59 }, /* 780 MHz */ + { K210_SYSCTL_PLL1, 8, 1, 0, 59, 3, 59 }, /* 390 MHz */ + { K210_SYSCTL_PLL2, 16, 1, 0, 22, 1, 22 }, /* 299 MHz */ +}; + +/** + * struct k210_sysclk - sysclk driver data + * @regs: system controller registers start address + * @clk_lock: clock setting spinlock + * @plls: SoC PLLs descriptors + * @aclk: ACLK clock + * @clks: All other clocks + */ +struct k210_sysclk { + void __iomem *regs; + spinlock_t clk_lock; + struct k210_pll plls[K210_PLL_NUM]; + struct clk_hw aclk; + struct k210_clk clks[K210_NUM_CLKS]; +}; + +#define to_k210_sysclk(_hw) container_of(_hw, struct k210_sysclk, aclk) + +/* + * Set ACLK parent selector: 0 for IN0, 1 for PLL0. + */ +static void k210_aclk_set_selector(void __iomem *regs, u8 sel) +{ + u32 reg = readl(regs + K210_SYSCTL_SEL0); + + if (sel) + reg |= K210_ACLK_SEL; + else + reg &= K210_ACLK_SEL; + writel(reg, regs + K210_SYSCTL_SEL0); +} + +static void k210_init_pll(void __iomem *regs, enum k210_pll_id pllid, + struct k210_pll *pll) +{ + pll->id = pllid; + pll->reg = regs + k210_plls_cfg[pllid].reg; + pll->lock = regs + K210_SYSCTL_PLL_LOCK; + pll->lock_shift = k210_plls_cfg[pllid].lock_shift; + pll->lock_width = k210_plls_cfg[pllid].lock_width; +} + +static void k210_pll_wait_for_lock(struct k210_pll *pll) +{ + u32 reg, mask = GENMASK(pll->lock_shift + pll->lock_width - 1, + pll->lock_shift); + + while (true) { + reg = readl(pll->lock); + if ((reg & mask) == mask) + break; + + reg |= BIT(pll->lock_shift + K210_PLL_CLEAR_SLIP); + writel(reg, pll->lock); + } +} + +static bool k210_pll_hw_is_enabled(struct k210_pll *pll) +{ + u32 reg = readl(pll->reg); + u32 mask = K210_PLL_PWRD | K210_PLL_EN; + + if (reg & K210_PLL_RESET) + return false; + + return (reg & mask) == mask; +} + +static void k210_pll_enable_hw(void __iomem *regs, struct k210_pll *pll) +{ + struct k210_pll_cfg *pll_cfg = &k210_plls_cfg[pll->id]; + u32 reg; + + if (k210_pll_hw_is_enabled(pll)) + return; + + /* + * For PLL0, we need to re-parent ACLK to IN0 to keep the CPU cores and + * SRAM running. + */ + if (pll->id == K210_PLL0) + k210_aclk_set_selector(regs, 0); + + /* Set PLL factors */ + reg = readl(pll->reg); + reg &= ~GENMASK(19, 0); + reg |= FIELD_PREP(K210_PLL_CLKR, pll_cfg->r); + reg |= FIELD_PREP(K210_PLL_CLKF, pll_cfg->f); + reg |= FIELD_PREP(K210_PLL_CLKOD, pll_cfg->od); + reg |= FIELD_PREP(K210_PLL_BWADJ, pll_cfg->bwadj); + reg |= K210_PLL_PWRD; + writel(reg, pll->reg); + + /* + * Reset the PLL: ensure reset is low before asserting it. + * The magic NOPs come from the Kendryte reference SDK. + */ + reg &= ~K210_PLL_RESET; + writel(reg, pll->reg); + reg |= K210_PLL_RESET; + writel(reg, pll->reg); + nop(); + nop(); + reg &= ~K210_PLL_RESET; + writel(reg, pll->reg); + + k210_pll_wait_for_lock(pll); + + reg &= ~K210_PLL_BYPASS; + reg |= K210_PLL_EN; + writel(reg, pll->reg); + + if (pll->id == K210_PLL0) + k210_aclk_set_selector(regs, 1); +} + +static int k210_pll_enable(struct clk_hw *hw) +{ + struct k210_pll *pll = to_k210_pll(hw); + struct k210_sysclk *ksc = pll->ksc; + unsigned long flags; + + spin_lock_irqsave(&ksc->clk_lock, flags); + + k210_pll_enable_hw(ksc->regs, pll); + + spin_unlock_irqrestore(&ksc->clk_lock, flags); + + return 0; +} + +static void k210_pll_disable(struct clk_hw *hw) +{ + struct k210_pll *pll = to_k210_pll(hw); + struct k210_sysclk *ksc = pll->ksc; + unsigned long flags; + u32 reg; + + /* + * Bypassing before powering off is important so child clocks do not + * stop working. This is especially important for pll0, the indirect + * parent of the cpu clock. + */ + spin_lock_irqsave(&ksc->clk_lock, flags); + reg = readl(pll->reg); + reg |= K210_PLL_BYPASS; + writel(reg, pll->reg); + + reg &= ~K210_PLL_PWRD; + reg &= ~K210_PLL_EN; + writel(reg, pll->reg); + spin_unlock_irqrestore(&ksc->clk_lock, flags); +} + +static int k210_pll_is_enabled(struct clk_hw *hw) +{ + return k210_pll_hw_is_enabled(to_k210_pll(hw)); +} + +static unsigned long k210_pll_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct k210_pll *pll = to_k210_pll(hw); + u32 reg = readl(pll->reg); + u32 r, f, od; + + if (reg & K210_PLL_BYPASS) + return parent_rate; + + if (!(reg & K210_PLL_PWRD)) + return 0; + + r = FIELD_GET(K210_PLL_CLKR, reg) + 1; + f = FIELD_GET(K210_PLL_CLKF, reg) + 1; + od = FIELD_GET(K210_PLL_CLKOD, reg) + 1; + + return (u64)parent_rate * f / (r * od); +} + +static const struct clk_ops k210_pll_ops = { + .enable = k210_pll_enable, + .disable = k210_pll_disable, + .is_enabled = k210_pll_is_enabled, + .recalc_rate = k210_pll_get_rate, +}; + +static int k210_pll2_set_parent(struct clk_hw *hw, u8 index) +{ + struct k210_pll *pll = to_k210_pll(hw); + struct k210_sysclk *ksc = pll->ksc; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&ksc->clk_lock, flags); + + reg = readl(pll->reg); + reg &= ~K210_PLL_SEL; + reg |= FIELD_PREP(K210_PLL_SEL, index); + writel(reg, pll->reg); + + spin_unlock_irqrestore(&ksc->clk_lock, flags); + + return 0; +} + +static u8 k210_pll2_get_parent(struct clk_hw *hw) +{ + struct k210_pll *pll = to_k210_pll(hw); + u32 reg = readl(pll->reg); + + return FIELD_GET(K210_PLL_SEL, reg); +} + +static const struct clk_ops k210_pll2_ops = { + .enable = k210_pll_enable, + .disable = k210_pll_disable, + .is_enabled = k210_pll_is_enabled, + .recalc_rate = k210_pll_get_rate, + .set_parent = k210_pll2_set_parent, + .get_parent = k210_pll2_get_parent, +}; + +static int __init k210_register_pll(struct device_node *np, + struct k210_sysclk *ksc, + enum k210_pll_id pllid, const char *name, + int num_parents, const struct clk_ops *ops) +{ + struct k210_pll *pll = &ksc->plls[pllid]; + struct clk_init_data init = {}; + const struct clk_parent_data parent_data[] = { + { /* .index = 0 for in0 */ }, + { .hw = &ksc->plls[K210_PLL0].hw }, + { .hw = &ksc->plls[K210_PLL1].hw }, + }; + + init.name = name; + init.parent_data = parent_data; + init.num_parents = num_parents; + init.ops = ops; + + pll->hw.init = &init; + pll->ksc = ksc; + + return of_clk_hw_register(np, &pll->hw); +} + +static int __init k210_register_plls(struct device_node *np, + struct k210_sysclk *ksc) +{ + int i, ret; + + for (i = 0; i < K210_PLL_NUM; i++) + k210_init_pll(ksc->regs, i, &ksc->plls[i]); + + /* PLL0 and PLL1 only have IN0 as parent */ + ret = k210_register_pll(np, ksc, K210_PLL0, "pll0", 1, &k210_pll_ops); + if (ret) { + pr_err("%pOFP: register PLL0 failed\n", np); + return ret; + } + ret = k210_register_pll(np, ksc, K210_PLL1, "pll1", 1, &k210_pll_ops); + if (ret) { + pr_err("%pOFP: register PLL1 failed\n", np); + return ret; + } + + /* PLL2 has IN0, PLL0 and PLL1 as parents */ + ret = k210_register_pll(np, ksc, K210_PLL2, "pll2", 3, &k210_pll2_ops); + if (ret) { + pr_err("%pOFP: register PLL2 failed\n", np); + return ret; + } + + return 0; +} + +static int k210_aclk_set_parent(struct clk_hw *hw, u8 index) +{ + struct k210_sysclk *ksc = to_k210_sysclk(hw); + unsigned long flags; + + spin_lock_irqsave(&ksc->clk_lock, flags); + + k210_aclk_set_selector(ksc->regs, index); + + spin_unlock_irqrestore(&ksc->clk_lock, flags); + + return 0; +} + +static u8 k210_aclk_get_parent(struct clk_hw *hw) +{ + struct k210_sysclk *ksc = to_k210_sysclk(hw); + u32 sel; + + sel = readl(ksc->regs + K210_SYSCTL_SEL0) & K210_ACLK_SEL; + + return sel ? 1 : 0; +} + +static unsigned long k210_aclk_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct k210_sysclk *ksc = to_k210_sysclk(hw); + u32 reg = readl(ksc->regs + K210_SYSCTL_SEL0); + unsigned int shift; + + if (!(reg & 0x1)) + return parent_rate; + + shift = FIELD_GET(K210_ACLK_DIV, reg); + + return parent_rate / (2UL << shift); +} + +static const struct clk_ops k210_aclk_ops = { + .set_parent = k210_aclk_set_parent, + .get_parent = k210_aclk_get_parent, + .recalc_rate = k210_aclk_get_rate, +}; + +/* + * ACLK has IN0 and PLL0 as parents. + */ +static int __init k210_register_aclk(struct device_node *np, + struct k210_sysclk *ksc) +{ + struct clk_init_data init = {}; + const struct clk_parent_data parent_data[] = { + { /* .index = 0 for in0 */ }, + { .hw = &ksc->plls[K210_PLL0].hw }, + }; + int ret; + + init.name = "aclk"; + init.parent_data = parent_data; + init.num_parents = 2; + init.ops = &k210_aclk_ops; + ksc->aclk.init = &init; + + ret = of_clk_hw_register(np, &ksc->aclk); + if (ret) { + pr_err("%pOFP: register aclk failed\n", np); + return ret; + } + + return 0; +} + +#define to_k210_clk(_hw) container_of(_hw, struct k210_clk, hw) + +static int k210_clk_enable(struct clk_hw *hw) +{ + struct k210_clk *kclk = to_k210_clk(hw); + struct k210_sysclk *ksc = kclk->ksc; + struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id]; + unsigned long flags; + u32 reg; + + if (!cfg->gate_reg) + return 0; + + spin_lock_irqsave(&ksc->clk_lock, flags); + reg = readl(ksc->regs + cfg->gate_reg); + reg |= BIT(cfg->gate_bit); + writel(reg, ksc->regs + cfg->gate_reg); + spin_unlock_irqrestore(&ksc->clk_lock, flags); + + return 0; +} + +static void k210_clk_disable(struct clk_hw *hw) +{ + struct k210_clk *kclk = to_k210_clk(hw); + struct k210_sysclk *ksc = kclk->ksc; + struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id]; + unsigned long flags; + u32 reg; + + if (!cfg->gate_reg) + return; + + spin_lock_irqsave(&ksc->clk_lock, flags); + reg = readl(ksc->regs + cfg->gate_reg); + reg &= ~BIT(cfg->gate_bit); + writel(reg, ksc->regs + cfg->gate_reg); + spin_unlock_irqrestore(&ksc->clk_lock, flags); +} + +static int k210_clk_set_parent(struct clk_hw *hw, u8 index) +{ + struct k210_clk *kclk = to_k210_clk(hw); + struct k210_sysclk *ksc = kclk->ksc; + struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id]; + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&ksc->clk_lock, flags); + reg = readl(ksc->regs + cfg->mux_reg); + if (index) + reg |= BIT(cfg->mux_bit); + else + reg &= ~BIT(cfg->mux_bit); + writel(reg, ksc->regs + cfg->mux_reg); + spin_unlock_irqrestore(&ksc->clk_lock, flags); + + return 0; +} + +static u8 k210_clk_get_parent(struct clk_hw *hw) +{ + struct k210_clk *kclk = to_k210_clk(hw); + struct k210_sysclk *ksc = kclk->ksc; + struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id]; + unsigned long flags; + u32 reg, idx; + + spin_lock_irqsave(&ksc->clk_lock, flags); + reg = readl(ksc->regs + cfg->mux_reg); + idx = (reg & BIT(cfg->mux_bit)) ? 1 : 0; + spin_unlock_irqrestore(&ksc->clk_lock, flags); + + return idx; +} + +static unsigned long k210_clk_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct k210_clk *kclk = to_k210_clk(hw); + struct k210_sysclk *ksc = kclk->ksc; + struct k210_clk_cfg *cfg = &k210_clk_cfgs[kclk->id]; + u32 reg, div_val; + + if (!cfg->div_reg) + return parent_rate; + + reg = readl(ksc->regs + cfg->div_reg); + div_val = (reg >> cfg->div_shift) & GENMASK(cfg->div_width - 1, 0); + + switch (cfg->div_type) { + case K210_DIV_ONE_BASED: + return parent_rate / (div_val + 1); + case K210_DIV_DOUBLE_ONE_BASED: + return parent_rate / ((div_val + 1) * 2); + case K210_DIV_POWER_OF_TWO: + return parent_rate / (2UL << div_val); + case K210_DIV_NONE: + default: + return 0; + } +} + +static const struct clk_ops k210_clk_mux_ops = { + .enable = k210_clk_enable, + .disable = k210_clk_disable, + .set_parent = k210_clk_set_parent, + .get_parent = k210_clk_get_parent, + .recalc_rate = k210_clk_get_rate, +}; + +static const struct clk_ops k210_clk_ops = { + .enable = k210_clk_enable, + .disable = k210_clk_disable, + .recalc_rate = k210_clk_get_rate, +}; + +static void __init k210_register_clk(struct device_node *np, + struct k210_sysclk *ksc, int id, + const struct clk_parent_data *parent_data, + int num_parents, unsigned long flags) +{ + struct k210_clk *kclk = &ksc->clks[id]; + struct clk_init_data init = {}; + int ret; + + init.name = k210_clk_cfgs[id].name; + init.flags = flags; + init.parent_data = parent_data; + init.num_parents = num_parents; + if (num_parents > 1) + init.ops = &k210_clk_mux_ops; + else + init.ops = &k210_clk_ops; + + kclk->id = id; + kclk->ksc = ksc; + kclk->hw.init = &init; + + ret = of_clk_hw_register(np, &kclk->hw); + if (ret) { + pr_err("%pOFP: register clock %s failed\n", + np, k210_clk_cfgs[id].name); + kclk->id = -1; + } +} + +/* + * All muxed clocks have IN0 and PLL0 as parents. + */ +static inline void __init k210_register_mux_clk(struct device_node *np, + struct k210_sysclk *ksc, int id) +{ + const struct clk_parent_data parent_data[2] = { + { /* .index = 0 for in0 */ }, + { .hw = &ksc->plls[K210_PLL0].hw } + }; + + k210_register_clk(np, ksc, id, parent_data, 2, 0); +} + +static inline void __init k210_register_in0_child(struct device_node *np, + struct k210_sysclk *ksc, int id) +{ + const struct clk_parent_data parent_data = { + /* .index = 0 for in0 */ + }; + + k210_register_clk(np, ksc, id, &parent_data, 1, 0); +} + +static inline void __init k210_register_pll_child(struct device_node *np, + struct k210_sysclk *ksc, int id, + enum k210_pll_id pllid, + unsigned long flags) +{ + const struct clk_parent_data parent_data = { + .hw = &ksc->plls[pllid].hw, + }; + + k210_register_clk(np, ksc, id, &parent_data, 1, flags); +} + +static inline void __init k210_register_aclk_child(struct device_node *np, + struct k210_sysclk *ksc, int id, + unsigned long flags) +{ + const struct clk_parent_data parent_data = { + .hw = &ksc->aclk, + }; + + k210_register_clk(np, ksc, id, &parent_data, 1, flags); +} + +static inline void __init k210_register_clk_child(struct device_node *np, + struct k210_sysclk *ksc, int id, + int parent_id) +{ + const struct clk_parent_data parent_data = { + .hw = &ksc->clks[parent_id].hw, + }; + + k210_register_clk(np, ksc, id, &parent_data, 1, 0); +} + +static struct clk_hw *k210_clk_hw_onecell_get(struct of_phandle_args *clkspec, + void *data) +{ + struct k210_sysclk *ksc = data; + unsigned int idx = clkspec->args[0]; + + if (idx >= K210_NUM_CLKS) + return ERR_PTR(-EINVAL); + + return &ksc->clks[idx].hw; +} + +static void __init k210_clk_init(struct device_node *np) +{ + struct device_node *sysctl_np; + struct k210_sysclk *ksc; + int i, ret; + + ksc = kzalloc(sizeof(*ksc), GFP_KERNEL); + if (!ksc) + return; + + spin_lock_init(&ksc->clk_lock); + sysctl_np = of_get_parent(np); + ksc->regs = of_iomap(sysctl_np, 0); + of_node_put(sysctl_np); + if (!ksc->regs) { + pr_err("%pOFP: failed to map registers\n", np); + return; + } + + ret = k210_register_plls(np, ksc); + if (ret) + return; + + ret = k210_register_aclk(np, ksc); + if (ret) + return; + + /* + * Critical clocks: there are no consumers of the SRAM clocks, + * including the AI clock for the third SRAM bank. The CPU clock + * is only referenced by the uarths serial device and so would be + * disabled if the serial console is disabled to switch to another + * console. Mark all these clocks as critical so that they are never + * disabled by the core clock management. + */ + k210_register_aclk_child(np, ksc, K210_CLK_CPU, CLK_IS_CRITICAL); + k210_register_aclk_child(np, ksc, K210_CLK_SRAM0, CLK_IS_CRITICAL); + k210_register_aclk_child(np, ksc, K210_CLK_SRAM1, CLK_IS_CRITICAL); + k210_register_pll_child(np, ksc, K210_CLK_AI, K210_PLL1, + CLK_IS_CRITICAL); + + /* Clocks with aclk as source */ + k210_register_aclk_child(np, ksc, K210_CLK_DMA, 0); + k210_register_aclk_child(np, ksc, K210_CLK_FFT, 0); + k210_register_aclk_child(np, ksc, K210_CLK_ROM, 0); + k210_register_aclk_child(np, ksc, K210_CLK_DVP, 0); + k210_register_aclk_child(np, ksc, K210_CLK_APB0, 0); + k210_register_aclk_child(np, ksc, K210_CLK_APB1, 0); + k210_register_aclk_child(np, ksc, K210_CLK_APB2, 0); + + /* Clocks with PLL0 as source */ + k210_register_pll_child(np, ksc, K210_CLK_SPI0, K210_PLL0, 0); + k210_register_pll_child(np, ksc, K210_CLK_SPI1, K210_PLL0, 0); + k210_register_pll_child(np, ksc, K210_CLK_SPI2, K210_PLL0, 0); + k210_register_pll_child(np, ksc, K210_CLK_I2C0, K210_PLL0, 0); + k210_register_pll_child(np, ksc, K210_CLK_I2C1, K210_PLL0, 0); + k210_register_pll_child(np, ksc, K210_CLK_I2C2, K210_PLL0, 0); + + /* Clocks with PLL2 as source */ + k210_register_pll_child(np, ksc, K210_CLK_I2S0, K210_PLL2, 0); + k210_register_pll_child(np, ksc, K210_CLK_I2S1, K210_PLL2, 0); + k210_register_pll_child(np, ksc, K210_CLK_I2S2, K210_PLL2, 0); + k210_register_pll_child(np, ksc, K210_CLK_I2S0_M, K210_PLL2, 0); + k210_register_pll_child(np, ksc, K210_CLK_I2S1_M, K210_PLL2, 0); + k210_register_pll_child(np, ksc, K210_CLK_I2S2_M, K210_PLL2, 0); + + /* Clocks with IN0 as source */ + k210_register_in0_child(np, ksc, K210_CLK_WDT0); + k210_register_in0_child(np, ksc, K210_CLK_WDT1); + k210_register_in0_child(np, ksc, K210_CLK_RTC); + + /* Clocks with APB0 as source */ + k210_register_clk_child(np, ksc, K210_CLK_GPIO, K210_CLK_APB0); + k210_register_clk_child(np, ksc, K210_CLK_UART1, K210_CLK_APB0); + k210_register_clk_child(np, ksc, K210_CLK_UART2, K210_CLK_APB0); + k210_register_clk_child(np, ksc, K210_CLK_UART3, K210_CLK_APB0); + k210_register_clk_child(np, ksc, K210_CLK_FPIOA, K210_CLK_APB0); + k210_register_clk_child(np, ksc, K210_CLK_SHA, K210_CLK_APB0); + + /* Clocks with APB1 as source */ + k210_register_clk_child(np, ksc, K210_CLK_AES, K210_CLK_APB1); + k210_register_clk_child(np, ksc, K210_CLK_OTP, K210_CLK_APB1); + + /* Mux clocks with in0 or pll0 as source */ + k210_register_mux_clk(np, ksc, K210_CLK_SPI3); + k210_register_mux_clk(np, ksc, K210_CLK_TIMER0); + k210_register_mux_clk(np, ksc, K210_CLK_TIMER1); + k210_register_mux_clk(np, ksc, K210_CLK_TIMER2); + + /* Check for registration errors */ + for (i = 0; i < K210_NUM_CLKS; i++) { + if (ksc->clks[i].id != i) + return; + } + + ret = of_clk_add_hw_provider(np, k210_clk_hw_onecell_get, ksc); + if (ret) { + pr_err("%pOFP: add clock provider failed %d\n", np, ret); + return; + } + + pr_info("%pOFP: CPU running at %lu MHz\n", + np, clk_hw_get_rate(&ksc->clks[K210_CLK_CPU].hw) / 1000000); +} + +CLK_OF_DECLARE(k210_clk, "canaan,k210-clk", k210_clk_init); + +/* + * Enable PLL1 to be able to use the AI SRAM. + */ +void __init k210_clk_early_init(void __iomem *regs) +{ + struct k210_pll pll1; + + /* Make sure ACLK selector is set to PLL0 */ + k210_aclk_set_selector(regs, 1); + + /* Startup PLL1 to enable the aisram bank for general memory use */ + k210_init_pll(regs, K210_PLL1, &pll1); + k210_pll_enable_hw(regs, &pll1); +} |