diff options
Diffstat (limited to 'drivers/comedi/Kconfig')
| -rw-r--r-- | drivers/comedi/Kconfig | 1355 |
1 files changed, 1355 insertions, 0 deletions
diff --git a/drivers/comedi/Kconfig b/drivers/comedi/Kconfig new file mode 100644 index 000000000..3cb61fa2c --- /dev/null +++ b/drivers/comedi/Kconfig @@ -0,0 +1,1355 @@ +# SPDX-License-Identifier: GPL-2.0 +config COMEDI + tristate "Data acquisition support (comedi)" + help + Enable support for a wide range of data acquisition devices + for Linux. + +if COMEDI + +config COMEDI_DEBUG + bool "Comedi debugging" + help + This is an option for use by developers; most people should + say N here. This enables comedi core and driver debugging. + +config COMEDI_DEFAULT_BUF_SIZE_KB + int "Comedi default initial asynchronous buffer size in KiB" + default "2048" + help + This is the default asynchronous buffer size which is used for + commands running in the background in kernel space. This + defaults to 2048 KiB of memory so that a 16 channel card + running at 10 kHz has of 2-4 seconds of buffer. + +config COMEDI_DEFAULT_BUF_MAXSIZE_KB + int "Comedi default maximum asynchronous buffer size in KiB" + default "20480" + help + This is the default maximum asynchronous buffer size which can + be requested by a userspace program without root privileges. + This is set to 20480 KiB so that a fast I/O card with 16 + channels running at 100 kHz has 2-4 seconds of buffer. + +menuconfig COMEDI_MISC_DRIVERS + bool "Comedi misc drivers" + help + Enable comedi misc drivers to be built + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about misc non-hardware comedi drivers. + +if COMEDI_MISC_DRIVERS + +config COMEDI_BOND + tristate "Comedi device bonding support" + select COMEDI_KCOMEDILIB + help + Enable support for a driver to 'bond' (merge) multiple subdevices + from multiple devices together as one. + + Currently, it only handles digital I/O subdevices. + + To compile this driver as a module, choose M here: the module will be + called comedi_bond. + +config COMEDI_TEST + tristate "Fake waveform generator support" + help + Enable support for the fake waveform generator. + This driver is mainly for testing purposes, but can also be used to + generate sample waveforms on systems that don't have data acquisition + hardware. + + To compile this driver as a module, choose M here: the module will be + called comedi_test. + +config COMEDI_PARPORT + tristate "Parallel port support" + help + Enable support for the standard parallel port. + A cheap and easy way to get a few more digital I/O lines. Steal + additional parallel ports from old computers or your neighbors' + computers. + + To compile this driver as a module, choose M here: the module will be + called comedi_parport. + +config COMEDI_SSV_DNP + tristate "SSV Embedded Systems DIL/Net-PC support" + depends on X86_32 || COMPILE_TEST + help + Enable support for SSV Embedded Systems DIL/Net-PC + + To compile this driver as a module, choose M here: the module will be + called ssv_dnp. + +endif # COMEDI_MISC_DRIVERS + +menuconfig COMEDI_ISA_DRIVERS + bool "Comedi ISA and PC/104 drivers" + help + Enable comedi ISA and PC/104 drivers to be built + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about ISA and PC/104 comedi drivers. + +if COMEDI_ISA_DRIVERS + +config COMEDI_PCL711 + tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support" + select COMEDI_8254 + help + Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112 + + To compile this driver as a module, choose M here: the module will be + called pcl711. + +config COMEDI_PCL724 + tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO" + select COMEDI_8255 + help + Enable support for ISA and PC/104 based 8255 digital i/o boards. This + driver provides a legacy comedi driver wrapper for the generic 8255 + support driver. + + Supported boards include: + Advantech PCL-724 24 channels + Advantech PCL-722 144 (or 96) channels + Advantech PCL-731 48 channels + ADlink ACL-7122 144 (or 96) channels + ADlink ACL-7124 24 channels + ADlink PET-48DIO 48 channels + WinSystems PCM-IO48 48 channels (PC/104) + Diamond Systems ONYX-MM-DIO 48 channels (PC/104) + + To compile this driver as a module, choose M here: the module will be + called pcl724. + +config COMEDI_PCL726 + tristate "Advantech PCL-726 and compatible ISA card support" + help + Enable support for Advantech PCL-726 and compatible ISA cards. + + To compile this driver as a module, choose M here: the module will be + called pcl726. + +config COMEDI_PCL730 + tristate "Simple Digital I/O board support (8-bit ports)" + help + Enable support for various simple ISA or PC/104 Digital I/O boards. + These boards all use 8-bit I/O ports. + + Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out + ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out + ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out + Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out + Advantech PCL-725 iso - 8 in/8 out + ICP P8R8-DIO iso - 8 in/8 out + ADlink ACL-7225b iso - 16 in/16 out + ICP P16R16-DIO iso - 16 in/16 out + Advantech PCL-733 iso - 32 in + Advantech PCL-734 iso - 32 out + Diamond Systems OPMM-1616-XT iso - 16 in/16 out + Diamond Systems PEARL-MM-P iso - 16 out + Diamond Systems IR104-PBF iso - 20 in/20 out + + To compile this driver as a module, choose M here: the module will be + called pcl730. + +config COMEDI_PCL812 + tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" + select COMEDI_ISADMA if ISA_DMA_API + select COMEDI_8254 + help + Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink + ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA, + A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards + + To compile this driver as a module, choose M here: the module will be + called pcl812. + +config COMEDI_PCL816 + tristate "Advantech PCL-814 and PCL-816 ISA card support" + select COMEDI_ISADMA if ISA_DMA_API + select COMEDI_8254 + help + Enable support for Advantech PCL-814 and PCL-816 ISA cards + + To compile this driver as a module, choose M here: the module will be + called pcl816. + +config COMEDI_PCL818 + tristate "Advantech PCL-718 and PCL-818 ISA card support" + select COMEDI_ISADMA if ISA_DMA_API + select COMEDI_8254 + help + Enable support for Advantech PCL-818 ISA cards + PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718 + + To compile this driver as a module, choose M here: the module will be + called pcl818. + +config COMEDI_PCM3724 + tristate "Advantech PCM-3724 PC/104 card support" + select COMEDI_8255 + help + Enable support for Advantech PCM-3724 PC/104 cards. + + To compile this driver as a module, choose M here: the module will be + called pcm3724. + +config COMEDI_AMPLC_DIO200_ISA + tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E" + select COMEDI_AMPLC_DIO200 + help + Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and + PC272E ISA DIO boards + + To compile this driver as a module, choose M here: the module will be + called amplc_dio200. + +config COMEDI_AMPLC_PC236_ISA + tristate "Amplicon PC36AT DIO board support" + select COMEDI_AMPLC_PC236 + help + Enable support for Amplicon PC36AT ISA DIO board. + + To compile this driver as a module, choose M here: the module will be + called amplc_pc236. + +config COMEDI_AMPLC_PC263_ISA + tristate "Amplicon PC263 relay board support" + help + Enable support for Amplicon PC263 ISA relay board. This board has + 16 reed relay output channels. + + To compile this driver as a module, choose M here: the module will be + called amplc_pc263. + +config COMEDI_RTI800 + tristate "Analog Devices RTI-800/815 ISA card support" + help + Enable support for Analog Devices RTI-800/815 ISA cards + + To compile this driver as a module, choose M here: the module will be + called rti800. + +config COMEDI_RTI802 + tristate "Analog Devices RTI-802 ISA card support" + help + Enable support for Analog Devices RTI-802 ISA cards + + To compile this driver as a module, choose M here: the module will be + called rti802. + +config COMEDI_DAC02 + tristate "Keithley Metrabyte DAC02 compatible ISA card support" + help + Enable support for Keithley Metrabyte DAC02 compatible ISA cards. + + To compile this driver as a module, choose M here: the module will be + called dac02. + +config COMEDI_DAS16M1 + tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support" + select COMEDI_8254 + select COMEDI_8255 + help + Enable support for Measurement Computing CIO-DAS16/M1 ISA cards. + + To compile this driver as a module, choose M here: the module will be + called das16m1. + +config COMEDI_DAS08_ISA + tristate "DAS-08 compatible ISA and PC/104 card support" + select COMEDI_DAS08 + help + Enable support for Keithley Metrabyte/ComputerBoards DAS08 + and compatible ISA and PC/104 cards: + Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH, + DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO, + DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16. + + To compile this driver as a module, choose M here: the module will be + called das08_isa. + +config COMEDI_DAS16 + tristate "DAS-16 compatible ISA and PC/104 card support" + select COMEDI_ISADMA if ISA_DMA_API + select COMEDI_8254 + select COMEDI_8255 + help + Enable support for Keithley Metrabyte/ComputerBoards DAS16 + and compatible ISA and PC/104 cards: + Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202, + DAS-1401, DAS-1402, DAS-1601, DAS-1602 and + ComputerBoards/MeasurementComputing PC104-DAS16/JR/, + PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12, + CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12, + CIO-DAS1602/16, CIO-DAS16/330 + + To compile this driver as a module, choose M here: the module will be + called das16. + +config COMEDI_DAS800 + tristate "DAS800 and compatible ISA card support" + select COMEDI_8254 + help + Enable support for Keithley Metrabyte DAS800 and compatible ISA cards + Keithley Metrabyte DAS-800, DAS-801, DAS-802 + Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and + CIO-DAS802/16 + + To compile this driver as a module, choose M here: the module will be + called das800. + +config COMEDI_DAS1800 + tristate "DAS1800 and compatible ISA card support" + select COMEDI_ISADMA if ISA_DMA_API + select COMEDI_8254 + help + Enable support for DAS1800 and compatible ISA cards + Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO, + DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO, + DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST, + DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and + DAS-1802AO + + To compile this driver as a module, choose M here: the module will be + called das1800. + +config COMEDI_DAS6402 + tristate "DAS6402 and compatible ISA card support" + select COMEDI_8254 + help + Enable support for DAS6402 and compatible ISA cards + Computerboards, Keithley Metrabyte DAS6402 and compatibles + + To compile this driver as a module, choose M here: the module will be + called das6402. + +config COMEDI_DT2801 + tristate "Data Translation DT2801 ISA card support" + help + Enable support for Data Translation DT2801 ISA cards + + To compile this driver as a module, choose M here: the module will be + called dt2801. + +config COMEDI_DT2811 + tristate "Data Translation DT2811 ISA card support" + help + Enable support for Data Translation DT2811 ISA cards + + To compile this driver as a module, choose M here: the module will be + called dt2811. + +config COMEDI_DT2814 + tristate "Data Translation DT2814 ISA card support" + help + Enable support for Data Translation DT2814 ISA cards + + To compile this driver as a module, choose M here: the module will be + called dt2814. + +config COMEDI_DT2815 + tristate "Data Translation DT2815 ISA card support" + help + Enable support for Data Translation DT2815 ISA cards + + To compile this driver as a module, choose M here: the module will be + called dt2815. + +config COMEDI_DT2817 + tristate "Data Translation DT2817 ISA card support" + help + Enable support for Data Translation DT2817 ISA cards + + To compile this driver as a module, choose M here: the module will be + called dt2817. + +config COMEDI_DT282X + tristate "Data Translation DT2821 series and DT-EZ ISA card support" + select COMEDI_ISADMA if ISA_DMA_API + help + Enable support for Data Translation DT2821 series including DT-EZ + DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI, + DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828, + DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL + + To compile this driver as a module, choose M here: the module will be + called dt282x. + +config COMEDI_DMM32AT + tristate "Diamond Systems MM-32-AT PC/104 board support" + select COMEDI_8255 + help + Enable support for Diamond Systems MM-32-AT PC/104 boards + + To compile this driver as a module, choose M here: the module will be + called dmm32at. + +config COMEDI_FL512 + tristate "FL512 ISA card support" + help + Enable support for FL512 ISA card + + To compile this driver as a module, choose M here: the module will be + called fl512. + +config COMEDI_AIO_AIO12_8 + tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support" + select COMEDI_8254 + select COMEDI_8255 + help + Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board + + To compile this driver as a module, choose M here: the module will be + called aio_aio12_8. + +config COMEDI_AIO_IIRO_16 + tristate "I/O Products PC/104 IIRO16 Board support" + help + Enable support for I/O Products PC/104 IIRO16 Relay And Isolated + Input Board + + To compile this driver as a module, choose M here: the module will be + called aio_iiro_16. + +config COMEDI_II_PCI20KC + tristate "Intelligent Instruments PCI-20001C carrier support" + depends on HAS_IOMEM + help + Enable support for Intelligent Instruments PCI-20001C carrier + PCI-20001, PCI-20006 and PCI-20341 + + To compile this driver as a module, choose M here: the module will be + called ii_pci20kc. + +config COMEDI_C6XDIGIO + tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support" + help + Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter + card + + To compile this driver as a module, choose M here: the module will be + called c6xdigio. + +config COMEDI_MPC624 + tristate "Micro/sys MPC-624 PC/104 board support" + help + Enable support for Micro/sys MPC-624 PC/104 board + + To compile this driver as a module, choose M here: the module will be + called mpc624. + +config COMEDI_ADQ12B + tristate "MicroAxial ADQ12-B data acquisition and control card support" + help + Enable MicroAxial ADQ12-B daq and control card support. + + To compile this driver as a module, choose M here: the module will be + called adq12b. + +config COMEDI_NI_AT_A2150 + tristate "NI AT-A2150 ISA card support" + select COMEDI_ISADMA if ISA_DMA_API + select COMEDI_8254 + help + Enable support for National Instruments AT-A2150 cards + + To compile this driver as a module, choose M here: the module will be + called ni_at_a2150. + +config COMEDI_NI_AT_AO + tristate "NI AT-AO-6/10 EISA card support" + select COMEDI_8254 + help + Enable support for National Instruments AT-AO-6/10 cards + + To compile this driver as a module, choose M here: the module will be + called ni_at_ao. + +config COMEDI_NI_ATMIO + tristate "NI AT-MIO E series ISA-PNP card support" + select COMEDI_8255 + select COMEDI_NI_TIO + help + Enable support for National Instruments AT-MIO E series cards + National Instruments AT-MIO-16E-1 (ni_atmio), + AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3, + AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 + + To compile this driver as a module, choose M here: the module will be + called ni_atmio. + +config COMEDI_NI_ATMIO16D + tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support" + select COMEDI_8255 + help + Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards. + + To compile this driver as a module, choose M here: the module will be + called ni_atmio16d. + +config COMEDI_NI_LABPC_ISA + tristate "NI Lab-PC and compatibles ISA support" + select COMEDI_NI_LABPC + help + Enable support for National Instruments Lab-PC and compatibles + Lab-PC-1200, Lab-PC-1200AI, Lab-PC+. + Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has + not yet been added to the driver. + + To compile this driver as a module, choose M here: the module will be + called ni_labpc. + +config COMEDI_PCMAD + tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support" + help + Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards. + + To compile this driver as a module, choose M here: the module will be + called pcmad. + +config COMEDI_PCMDA12 + tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support" + help + Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards. + Note that the board is not ISA-PNP capable and thus needs the I/O + port comedi_config parameter. + + To compile this driver as a module, choose M here: the module will be + called pcmda12. + +config COMEDI_PCMMIO + tristate "Winsystems PCM-MIO PC/104 board support" + help + Enable support for Winsystems PCM-MIO multifunction PC/104 boards. + + To compile this driver as a module, choose M here: the module will be + called pcmmio. + +config COMEDI_PCMUIO + tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support" + help + Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards. + + To compile this driver as a module, choose M here: the module will be + called pcmuio. + +config COMEDI_MULTIQ3 + tristate "Quanser Consulting MultiQ-3 ISA card support" + help + Enable support for Quanser Consulting MultiQ-3 ISA cards + + To compile this driver as a module, choose M here: the module will be + called multiq3. + +config COMEDI_S526 + tristate "Sensoray s526 support" + help + Enable support for Sensoray s526 + + To compile this driver as a module, choose M here: the module will be + called s526. + +endif # COMEDI_ISA_DRIVERS + +menuconfig COMEDI_PCI_DRIVERS + tristate "Comedi PCI drivers" + depends on PCI + help + Enable support for comedi PCI drivers. + + To compile this support as a module, choose M here: the module will + be called comedi_pci. + +if COMEDI_PCI_DRIVERS + +config COMEDI_8255_PCI + tristate "Generic PCI based 8255 digital i/o board support" + select COMEDI_8255 + help + Enable support for PCI based 8255 digital i/o boards. This driver + provides a PCI wrapper around the generic 8255 driver. + + Supported boards: + ADlink - PCI-7224, PCI-7248, and PCI-7296 + Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and + PCI-DIO96H + National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, + PCI-6503B, PCI-6503X, and PXI-6503 + + To compile this driver as a module, choose M here: the module will + be called 8255_pci. + +config COMEDI_ADDI_WATCHDOG + tristate + help + Provides support for the watchdog subdevice found on many ADDI-DATA + boards. This module will be automatically selected when needed. The + module will be called addi_watchdog. + +config COMEDI_ADDI_APCI_1032 + tristate "ADDI-DATA APCI_1032 support" + help + Enable support for ADDI-DATA APCI_1032 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_1032. + +config COMEDI_ADDI_APCI_1500 + tristate "ADDI-DATA APCI_1500 support" + help + Enable support for ADDI-DATA APCI_1500 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_1500. + +config COMEDI_ADDI_APCI_1516 + tristate "ADDI-DATA APCI-1016/1516/2016 support" + select COMEDI_ADDI_WATCHDOG + help + Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards. + These are 16 channel, optically isolated, digital I/O boards. The 1516 + and 2016 boards also have a watchdog for resetting the outputs to "0". + + To compile this driver as a module, choose M here: the module will be + called addi_apci_1516. + +config COMEDI_ADDI_APCI_1564 + tristate "ADDI-DATA APCI_1564 support" + select COMEDI_ADDI_WATCHDOG + help + Enable support for ADDI-DATA APCI_1564 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_1564. + +config COMEDI_ADDI_APCI_16XX + tristate "ADDI-DATA APCI_16xx support" + help + Enable support for ADDI-DATA APCI_16xx cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_16xx. + +config COMEDI_ADDI_APCI_2032 + tristate "ADDI-DATA APCI_2032 support" + select COMEDI_ADDI_WATCHDOG + help + Enable support for ADDI-DATA APCI_2032 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_2032. + +config COMEDI_ADDI_APCI_2200 + tristate "ADDI-DATA APCI_2200 support" + select COMEDI_ADDI_WATCHDOG + help + Enable support for ADDI-DATA APCI_2200 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_2200. + +config COMEDI_ADDI_APCI_3120 + tristate "ADDI-DATA APCI_3120/3001 support" + depends on HAS_DMA + help + Enable support for ADDI-DATA APCI_3120/3001 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_3120. + +config COMEDI_ADDI_APCI_3501 + tristate "ADDI-DATA APCI_3501 support" + help + Enable support for ADDI-DATA APCI_3501 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_3501. + +config COMEDI_ADDI_APCI_3XXX + tristate "ADDI-DATA APCI_3xxx support" + help + Enable support for ADDI-DATA APCI_3xxx cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_3xxx. + +config COMEDI_ADL_PCI6208 + tristate "ADLink PCI-6208A support" + help + Enable support for ADLink PCI-6208A cards + + To compile this driver as a module, choose M here: the module will be + called adl_pci6208. + +config COMEDI_ADL_PCI7X3X + tristate "ADLink PCI-723X/743X isolated digital i/o board support" + help + Enable support for ADlink PCI-723X/743X isolated digital i/o boards. + Supported boards include the 32-channel PCI-7230 (16 in/16 out), + PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel + PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out). + + To compile this driver as a module, choose M here: the module will be + called adl_pci7x3x. + +config COMEDI_ADL_PCI8164 + tristate "ADLink PCI-8164 4 Axes Motion Control board support" + help + Enable support for ADlink PCI-8164 4 Axes Motion Control board + + To compile this driver as a module, choose M here: the module will be + called adl_pci8164. + +config COMEDI_ADL_PCI9111 + tristate "ADLink PCI-9111HR support" + select COMEDI_8254 + help + Enable support for ADlink PCI9111 cards + + To compile this driver as a module, choose M here: the module will be + called adl_pci9111. + +config COMEDI_ADL_PCI9118 + tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" + depends on HAS_DMA + select COMEDI_8254 + help + Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards + + To compile this driver as a module, choose M here: the module will be + called adl_pci9118. + +config COMEDI_ADV_PCI1710 + tristate "Advantech PCI-171x and PCI-1731 support" + select COMEDI_8254 + help + Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711, + PCI-1713 and PCI-1731 + + To compile this driver as a module, choose M here: the module will be + called adv_pci1710. + +config COMEDI_ADV_PCI1720 + tristate "Advantech PCI-1720 support" + help + Enable support for Advantech PCI-1720 Analog Output board. + + To compile this driver as a module, choose M here: the module will be + called adv_pci1720. + +config COMEDI_ADV_PCI1723 + tristate "Advantech PCI-1723 support" + help + Enable support for Advantech PCI-1723 cards + + To compile this driver as a module, choose M here: the module will be + called adv_pci1723. + +config COMEDI_ADV_PCI1724 + tristate "Advantech PCI-1724U support" + help + Enable support for Advantech PCI-1724U cards. These are 32-channel + analog output cards with voltage and current loop output ranges and + 14-bit resolution. + + To compile this driver as a module, choose M here: the module will be + called adv_pci1724. + +config COMEDI_ADV_PCI1760 + tristate "Advantech PCI-1760 support" + help + Enable support for Advantech PCI-1760 board. + + To compile this driver as a module, choose M here: the module will be + called adv_pci1760. + +config COMEDI_ADV_PCI_DIO + tristate "Advantech PCI DIO card support" + select COMEDI_8254 + select COMEDI_8255 + help + Enable support for Advantech PCI DIO cards + PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U, + PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756, + PCI-1761 and PCI-1762 + + To compile this driver as a module, choose M here: the module will be + called adv_pci_dio. + +config COMEDI_AMPLC_DIO200_PCI + tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support" + select COMEDI_AMPLC_DIO200 + help + Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236 + and PCIe296 DIO boards. + + To compile this driver as a module, choose M here: the module will be + called amplc_dio200_pci. + +config COMEDI_AMPLC_PC236_PCI + tristate "Amplicon PCI236 DIO board support" + select COMEDI_AMPLC_PC236 + help + Enable support for Amplicon PCI236 DIO board. + + To compile this driver as a module, choose M here: the module will be + called amplc_pci236. + +config COMEDI_AMPLC_PC263_PCI + tristate "Amplicon PCI263 relay board support" + help + Enable support for Amplicon PCI263 relay board. This is a PCI board + with 16 reed relay output channels. + + To compile this driver as a module, choose M here: the module will be + called amplc_pci263. + +config COMEDI_AMPLC_PCI224 + tristate "Amplicon PCI224 and PCI234 support" + select COMEDI_8254 + help + Enable support for Amplicon PCI224 and PCI234 AO boards + + To compile this driver as a module, choose M here: the module will be + called amplc_pci224. + +config COMEDI_AMPLC_PCI230 + tristate "Amplicon PCI230 and PCI260 support" + select COMEDI_8254 + select COMEDI_8255 + help + Enable support for Amplicon PCI230 and PCI260 Multifunction I/O + boards + + To compile this driver as a module, choose M here: the module will be + called amplc_pci230. + +config COMEDI_CONTEC_PCI_DIO + tristate "Contec PIO1616L digital I/O board support" + help + Enable support for the Contec PIO1616L digital I/O board + + To compile this driver as a module, choose M here: the module will be + called contec_pci_dio. + +config COMEDI_DAS08_PCI + tristate "DAS-08 PCI support" + select COMEDI_DAS08 + help + Enable support for PCI DAS-08 cards. + + To compile this driver as a module, choose M here: the module will be + called das08_pci. + +config COMEDI_DT3000 + tristate "Data Translation DT3000 series support" + help + Enable support for Data Translation DT3000 series + DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and + DT3004-200 + + To compile this driver as a module, choose M here: the module will be + called dt3000. + +config COMEDI_DYNA_PCI10XX + tristate "Dynalog PCI DAQ series support" + help + Enable support for Dynalog PCI DAQ series + PCI-1050 + + To compile this driver as a module, choose M here: the module will be + called dyna_pci10xx. + +config COMEDI_GSC_HPDI + tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support" + help + Enable support for General Standards Corporation high speed parallel + digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32. + Only receive mode works, transmit not supported. + + To compile this driver as a module, choose M here: the module will be + called gsc_hpdi. + +config COMEDI_MF6X4 + tristate "Humusoft MF634 and MF624 DAQ Card support" + help + This driver supports both Humusoft MF634 and MF624 Data acquisition + cards. The legacy Humusoft MF614 card is not supported. + +config COMEDI_ICP_MULTI + tristate "Inova ICP_MULTI support" + help + Enable support for Inova ICP_MULTI card + + To compile this driver as a module, choose M here: the module will be + called icp_multi. + +config COMEDI_DAQBOARD2000 + tristate "IOtech DAQboard/2000 support" + select COMEDI_8255 + help + Enable support for the IOtech DAQboard/2000 + + To compile this driver as a module, choose M here: the module will be + called daqboard2000. + +config COMEDI_JR3_PCI + tristate "JR3/PCI force sensor board support" + help + Enable support for JR3/PCI force sensor boards + + To compile this driver as a module, choose M here: the module will be + called jr3_pci. + +config COMEDI_KE_COUNTER + tristate "Kolter-Electronic PCI Counter 1 card support" + help + Enable support for Kolter-Electronic PCI Counter 1 cards + + To compile this driver as a module, choose M here: the module will be + called ke_counter. + +config COMEDI_CB_PCIDAS64 + tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support" + select COMEDI_8255 + help + Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx, + 60xx, and 4020 series with the PLX 9080 PCI controller + + To compile this driver as a module, choose M here: the module will be + called cb_pcidas64. + +config COMEDI_CB_PCIDAS + tristate "MeasurementComputing PCI-DAS support" + select COMEDI_8254 + select COMEDI_8255 + help + Enable support for ComputerBoards/MeasurementComputing PCI-DAS with + AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr, + PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001 + and PCI_DAS1002. + + To compile this driver as a module, choose M here: the module will be + called cb_pcidas. + +config COMEDI_CB_PCIDDA + tristate "MeasurementComputing PCI-DDA series support" + select COMEDI_8255 + help + Enable support for ComputerBoards/MeasurementComputing PCI-DDA + series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16, + PCI-DDA04/16 and PCI-DDA02/16 + + To compile this driver as a module, choose M here: the module will be + called cb_pcidda. + +config COMEDI_CB_PCIMDAS + tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support" + select COMEDI_8254 + select COMEDI_8255 + help + Enable support for ComputerBoards/MeasurementComputing PCI Migration + series PCIM-DAS1602/16 and PCIe-DAS1602/16. + + To compile this driver as a module, choose M here: the module will be + called cb_pcimdas. + +config COMEDI_CB_PCIMDDA + tristate "MeasurementComputing PCIM-DDA06-16 support" + select COMEDI_8255 + help + Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16 + + To compile this driver as a module, choose M here: the module will be + called cb_pcimdda. + +config COMEDI_ME4000 + tristate "Meilhaus ME-4000 support" + select COMEDI_8254 + help + Enable support for Meilhaus PCI data acquisition cards + ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is + + To compile this driver as a module, choose M here: the module will be + called me4000. + +config COMEDI_ME_DAQ + tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support" + help + Enable support for Meilhaus PCI data acquisition cards + ME-2000i, ME-2600i and ME-3000vm1 + + To compile this driver as a module, choose M here: the module will be + called me_daq. + +config COMEDI_NI_6527 + tristate "NI 6527 support" + help + Enable support for the National Instruments 6527 PCI card + + To compile this driver as a module, choose M here: the module will be + called ni_6527. + +config COMEDI_NI_65XX + tristate "NI 65xx static dio PCI card support" + help + Enable support for National Instruments 65xx static dio boards. + Supported devices: National Instruments PCI-6509 (ni_65xx), + PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513, + PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517, + PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528 + + To compile this driver as a module, choose M here: the module will be + called ni_65xx. + +config COMEDI_NI_660X + tristate "NI 660x counter/timer PCI card support" + depends on HAS_DMA + select COMEDI_NI_TIOCMD + help + Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, + PXI-6602, PXI-6608, PCI-6624, and PXI-6624. + + To compile this driver as a module, choose M here: the module will be + called ni_660x. + +config COMEDI_NI_670X + tristate "NI 670x PCI card support" + help + Enable support for National Instruments PCI-6703 and PCI-6704 + + To compile this driver as a module, choose M here: the module will be + called ni_670x. + +config COMEDI_NI_LABPC_PCI + tristate "NI Lab-PC PCI-1200 support" + select COMEDI_NI_LABPC + help + Enable support for National Instruments Lab-PC PCI-1200. + + To compile this driver as a module, choose M here: the module will be + called ni_labpc_pci. + +config COMEDI_NI_PCIDIO + tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support" + depends on HAS_DMA + select COMEDI_MITE + select COMEDI_8255 + help + Enable support for National Instruments PCI-DIO-32HS, PXI-6533, + PCI-6533 and PCI-6534 + + To compile this driver as a module, choose M here: the module will be + called ni_pcidio. + +config COMEDI_NI_PCIMIO + tristate "NI PCI-MIO-E series and M series support" + depends on HAS_DMA + select COMEDI_NI_TIOCMD + select COMEDI_8255 + help + Enable support for National Instruments PCI-MIO-E series and M series + (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, + PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E, + PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E, + PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111, + PCI-6220, PXI-6220, PCI-6221, PXI-6221, PCI-6224, PXI-6224, PCI-6225, + PXI-6225, PCI-6229, PXI-6229, PCI-6250, PXI-6250, PCI-6251, PXI-6251, + PCIe-6251, PXIe-6251, PCI-6254, PXI-6254, PCI-6259, PXI-6259, + PCIe-6259, PXIe-6259, PCI-6280, PXI-6280, PCI-6281, PXI-6281, + PCI-6284, PXI-6284, PCI-6289, PXI-6289, PCI-6711, PXI-6711, + PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E, + PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143 + + To compile this driver as a module, choose M here: the module will be + called ni_pcimio. + +config COMEDI_RTD520 + tristate "Real Time Devices PCI4520/DM7520 support" + select COMEDI_8254 + help + Enable support for Real Time Devices PCI4520/DM7520 + + To compile this driver as a module, choose M here: the module will be + called rtd520. + +config COMEDI_S626 + tristate "Sensoray 626 support" + help + Enable support for Sensoray 626 + + To compile this driver as a module, choose M here: the module will be + called s626. + +config COMEDI_MITE + depends on HAS_DMA + tristate + +config COMEDI_NI_TIOCMD + tristate + depends on HAS_DMA + select COMEDI_NI_TIO + select COMEDI_MITE + +endif # COMEDI_PCI_DRIVERS + +menuconfig COMEDI_PCMCIA_DRIVERS + tristate "Comedi PCMCIA drivers" + depends on PCMCIA + help + Enable support for comedi PCMCIA drivers. + + To compile this support as a module, choose M here: the module will + be called comedi_pcmcia. + +if COMEDI_PCMCIA_DRIVERS + +config COMEDI_CB_DAS16_CS + tristate "CB DAS16 series PCMCIA support" + select COMEDI_8254 + help + Enable support for the ComputerBoards/MeasurementComputing PCMCIA + cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16 + + To compile this driver as a module, choose M here: the module will be + called cb_das16_cs. + +config COMEDI_DAS08_CS + tristate "CB DAS08 PCMCIA support" + select COMEDI_DAS08 + help + Enable support for the ComputerBoards/MeasurementComputing DAS-08 + PCMCIA card + + To compile this driver as a module, choose M here: the module will be + called das08_cs. + +config COMEDI_NI_DAQ_700_CS + tristate "NI DAQCard-700 PCMCIA support" + help + Enable support for the National Instruments PCMCIA DAQCard-700 DIO + + To compile this driver as a module, choose M here: the module will be + called ni_daq_700. + +config COMEDI_NI_DAQ_DIO24_CS + tristate "NI DAQ-Card DIO-24 PCMCIA support" + select COMEDI_8255 + help + Enable support for the National Instruments PCMCIA DAQ-Card DIO-24 + + To compile this driver as a module, choose M here: the module will be + called ni_daq_dio24. + +config COMEDI_NI_LABPC_CS + tristate "NI DAQCard-1200 PCMCIA support" + select COMEDI_NI_LABPC + help + Enable support for the National Instruments PCMCIA DAQCard-1200 + + To compile this driver as a module, choose M here: the module will be + called ni_labpc_cs. + +config COMEDI_NI_MIO_CS + tristate "NI DAQCard E series PCMCIA support" + select COMEDI_NI_TIO + select COMEDI_8255 + help + Enable support for the National Instruments PCMCIA DAQCard E series + DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E + and DAQCard-6036E + + To compile this driver as a module, choose M here: the module will be + called ni_mio_cs. + +config COMEDI_QUATECH_DAQP_CS + tristate "Quatech DAQP PCMCIA data capture card support" + help + Enable support for the Quatech DAQP PCMCIA data capture cards + DAQP-208 and DAQP-308 + + To compile this driver as a module, choose M here: the module will be + called quatech_daqp_cs. + +endif # COMEDI_PCMCIA_DRIVERS + +menuconfig COMEDI_USB_DRIVERS + tristate "Comedi USB drivers" + depends on USB + help + Enable support for comedi USB drivers. + + To compile this support as a module, choose M here: the module will + be called comedi_usb. + +if COMEDI_USB_DRIVERS + +config COMEDI_DT9812 + tristate "DataTranslation DT9812 USB module support" + help + Enable support for the Data Translation DT9812 USB module + + To compile this driver as a module, choose M here: the module will be + called dt9812. + +config COMEDI_NI_USB6501 + tristate "NI USB-6501 support" + help + Enable support for the National Instruments USB-6501 module. + + The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that + provides 24 digital I/O lines channels and one 32-bit counter. + + To compile this driver as a module, choose M here: the module will be + called ni_usb6501. + +config COMEDI_USBDUX + tristate "ITL USB-DUX-D support" + help + Enable support for the Incite Technology Ltd USB-DUX-D Board + + To compile this driver as a module, choose M here: the module will be + called usbdux. + +config COMEDI_USBDUXFAST + tristate "ITL USB-DUXfast support" + help + Enable support for the Incite Technology Ltd USB-DUXfast Board + + To compile this driver as a module, choose M here: the module will be + called usbduxfast. + +config COMEDI_USBDUXSIGMA + tristate "ITL USB-DUXsigma support" + help + Enable support for the Incite Technology Ltd USB-DUXsigma Board + + To compile this driver as a module, choose M here: the module will be + called usbduxsigma. + +config COMEDI_VMK80XX + tristate "Velleman VM110/VM140 USB Board support" + help + Build the Velleman USB Board Low-Level Driver supporting the + K8055/K8061 aka VM110/VM140 devices + + To compile this driver as a module, choose M here: the module will be + called vmk80xx. + +endif # COMEDI_USB_DRIVERS + +config COMEDI_8254 + tristate + +config COMEDI_8255 + tristate + +config COMEDI_8255_SA + tristate "Standalone 8255 support" + select COMEDI_8255 + help + Enable support for 8255 digital I/O as a standalone driver. + + You should enable compilation this driver if you plan to use a board + that has an 8255 chip at a known I/O base address and there are no + other Comedi drivers for the board. + + Note that Comedi drivers for most multi-function boards incorporating + an 8255 chip use the 'comedi_8255' module. Most PCI-based 8255 + boards use the 8255_pci driver as a wrapper around the 'comedi_8255' + module. + + To compile this driver as a module, choose M here: the module will be + called 8255. + +config COMEDI_KCOMEDILIB + tristate "Comedi kcomedilib" + help + Build the kcomedilib. + + This is a kernel module used to open and manipulate Comedi devices + from within kernel code. It is currently only used by the + comedi_bond driver, and its functionality has been stripped down to + the needs of that driver, so is currently not very useful for + anything else. + + To compile kcomedilib as a module, choose M here: the module will be + called kcomedilib. + +config COMEDI_AMPLC_DIO200 + select COMEDI_8254 + tristate + +config COMEDI_AMPLC_PC236 + tristate + select COMEDI_8255 + +config COMEDI_DAS08 + tristate + select COMEDI_8254 + select COMEDI_8255 + +config COMEDI_ISADMA + tristate + +config COMEDI_NI_LABPC + tristate + select COMEDI_8254 + select COMEDI_8255 + +config COMEDI_NI_LABPC_ISADMA + tristate + default COMEDI_NI_LABPC + depends on COMEDI_NI_LABPC_ISA != n + depends on ISA_DMA_API + select COMEDI_ISADMA + +config COMEDI_NI_TIO + tristate + select COMEDI_NI_ROUTING + +config COMEDI_NI_ROUTING + tristate + +config COMEDI_TESTS + tristate "Comedi unit tests" + help + Enable comedi unit-test modules to be built. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about comedi unit-test modules. + +if COMEDI_TESTS + +config COMEDI_TESTS_EXAMPLE + tristate "Comedi example unit-test module" + help + Enable support for an example unit-test module. This is just a + silly example to be used as a basis for writing other unit-test + modules. + + To compile this as a module, choose M here: the module will be called + comedi_example_test. + +config COMEDI_TESTS_NI_ROUTES + tristate "NI routing unit-test module" + select COMEDI_NI_ROUTING + help + Enable support for a unit-test module to test the signal routing + code used by comedi drivers for various National Instruments cards. + + To compile this as a module, choose M here: the module will be called + ni_routes_test. + +endif # COMEDI_TESTS + +endif # COMEDI |