diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/hwmon/pmbus/pmbus.h | 511 |
1 files changed, 511 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h new file mode 100644 index 000000000..10fb17879 --- /dev/null +++ b/drivers/hwmon/pmbus/pmbus.h @@ -0,0 +1,511 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * pmbus.h - Common defines and structures for PMBus devices + * + * Copyright (c) 2010, 2011 Ericsson AB. + * Copyright (c) 2012 Guenter Roeck + */ + +#ifndef PMBUS_H +#define PMBUS_H + +#include <linux/bitops.h> +#include <linux/regulator/driver.h> + +/* + * Registers + */ +enum pmbus_regs { + PMBUS_PAGE = 0x00, + PMBUS_OPERATION = 0x01, + PMBUS_ON_OFF_CONFIG = 0x02, + PMBUS_CLEAR_FAULTS = 0x03, + PMBUS_PHASE = 0x04, + + PMBUS_WRITE_PROTECT = 0x10, + + PMBUS_CAPABILITY = 0x19, + PMBUS_QUERY = 0x1A, + + PMBUS_VOUT_MODE = 0x20, + PMBUS_VOUT_COMMAND = 0x21, + PMBUS_VOUT_TRIM = 0x22, + PMBUS_VOUT_CAL_OFFSET = 0x23, + PMBUS_VOUT_MAX = 0x24, + PMBUS_VOUT_MARGIN_HIGH = 0x25, + PMBUS_VOUT_MARGIN_LOW = 0x26, + PMBUS_VOUT_TRANSITION_RATE = 0x27, + PMBUS_VOUT_DROOP = 0x28, + PMBUS_VOUT_SCALE_LOOP = 0x29, + PMBUS_VOUT_SCALE_MONITOR = 0x2A, + + PMBUS_COEFFICIENTS = 0x30, + PMBUS_POUT_MAX = 0x31, + + PMBUS_FAN_CONFIG_12 = 0x3A, + PMBUS_FAN_COMMAND_1 = 0x3B, + PMBUS_FAN_COMMAND_2 = 0x3C, + PMBUS_FAN_CONFIG_34 = 0x3D, + PMBUS_FAN_COMMAND_3 = 0x3E, + PMBUS_FAN_COMMAND_4 = 0x3F, + + PMBUS_VOUT_OV_FAULT_LIMIT = 0x40, + PMBUS_VOUT_OV_FAULT_RESPONSE = 0x41, + PMBUS_VOUT_OV_WARN_LIMIT = 0x42, + PMBUS_VOUT_UV_WARN_LIMIT = 0x43, + PMBUS_VOUT_UV_FAULT_LIMIT = 0x44, + PMBUS_VOUT_UV_FAULT_RESPONSE = 0x45, + PMBUS_IOUT_OC_FAULT_LIMIT = 0x46, + PMBUS_IOUT_OC_FAULT_RESPONSE = 0x47, + PMBUS_IOUT_OC_LV_FAULT_LIMIT = 0x48, + PMBUS_IOUT_OC_LV_FAULT_RESPONSE = 0x49, + PMBUS_IOUT_OC_WARN_LIMIT = 0x4A, + PMBUS_IOUT_UC_FAULT_LIMIT = 0x4B, + PMBUS_IOUT_UC_FAULT_RESPONSE = 0x4C, + + PMBUS_OT_FAULT_LIMIT = 0x4F, + PMBUS_OT_FAULT_RESPONSE = 0x50, + PMBUS_OT_WARN_LIMIT = 0x51, + PMBUS_UT_WARN_LIMIT = 0x52, + PMBUS_UT_FAULT_LIMIT = 0x53, + PMBUS_UT_FAULT_RESPONSE = 0x54, + PMBUS_VIN_OV_FAULT_LIMIT = 0x55, + PMBUS_VIN_OV_FAULT_RESPONSE = 0x56, + PMBUS_VIN_OV_WARN_LIMIT = 0x57, + PMBUS_VIN_UV_WARN_LIMIT = 0x58, + PMBUS_VIN_UV_FAULT_LIMIT = 0x59, + + PMBUS_IIN_OC_FAULT_LIMIT = 0x5B, + PMBUS_IIN_OC_WARN_LIMIT = 0x5D, + + PMBUS_POUT_OP_FAULT_LIMIT = 0x68, + PMBUS_POUT_OP_WARN_LIMIT = 0x6A, + PMBUS_PIN_OP_WARN_LIMIT = 0x6B, + + PMBUS_STATUS_BYTE = 0x78, + PMBUS_STATUS_WORD = 0x79, + PMBUS_STATUS_VOUT = 0x7A, + PMBUS_STATUS_IOUT = 0x7B, + PMBUS_STATUS_INPUT = 0x7C, + PMBUS_STATUS_TEMPERATURE = 0x7D, + PMBUS_STATUS_CML = 0x7E, + PMBUS_STATUS_OTHER = 0x7F, + PMBUS_STATUS_MFR_SPECIFIC = 0x80, + PMBUS_STATUS_FAN_12 = 0x81, + PMBUS_STATUS_FAN_34 = 0x82, + + PMBUS_READ_VIN = 0x88, + PMBUS_READ_IIN = 0x89, + PMBUS_READ_VCAP = 0x8A, + PMBUS_READ_VOUT = 0x8B, + PMBUS_READ_IOUT = 0x8C, + PMBUS_READ_TEMPERATURE_1 = 0x8D, + PMBUS_READ_TEMPERATURE_2 = 0x8E, + PMBUS_READ_TEMPERATURE_3 = 0x8F, + PMBUS_READ_FAN_SPEED_1 = 0x90, + PMBUS_READ_FAN_SPEED_2 = 0x91, + PMBUS_READ_FAN_SPEED_3 = 0x92, + PMBUS_READ_FAN_SPEED_4 = 0x93, + PMBUS_READ_DUTY_CYCLE = 0x94, + PMBUS_READ_FREQUENCY = 0x95, + PMBUS_READ_POUT = 0x96, + PMBUS_READ_PIN = 0x97, + + PMBUS_REVISION = 0x98, + PMBUS_MFR_ID = 0x99, + PMBUS_MFR_MODEL = 0x9A, + PMBUS_MFR_REVISION = 0x9B, + PMBUS_MFR_LOCATION = 0x9C, + PMBUS_MFR_DATE = 0x9D, + PMBUS_MFR_SERIAL = 0x9E, + + PMBUS_MFR_VIN_MIN = 0xA0, + PMBUS_MFR_VIN_MAX = 0xA1, + PMBUS_MFR_IIN_MAX = 0xA2, + PMBUS_MFR_PIN_MAX = 0xA3, + PMBUS_MFR_VOUT_MIN = 0xA4, + PMBUS_MFR_VOUT_MAX = 0xA5, + PMBUS_MFR_IOUT_MAX = 0xA6, + PMBUS_MFR_POUT_MAX = 0xA7, + + PMBUS_IC_DEVICE_ID = 0xAD, + PMBUS_IC_DEVICE_REV = 0xAE, + + PMBUS_MFR_MAX_TEMP_1 = 0xC0, + PMBUS_MFR_MAX_TEMP_2 = 0xC1, + PMBUS_MFR_MAX_TEMP_3 = 0xC2, + +/* + * Virtual registers. + * Useful to support attributes which are not supported by standard PMBus + * registers but exist as manufacturer specific registers on individual chips. + * Must be mapped to real registers in device specific code. + * + * Semantics: + * Virtual registers are all word size. + * READ registers are read-only; writes are either ignored or return an error. + * RESET registers are read/write. Reading reset registers returns zero + * (used for detection), writing any value causes the associated history to be + * reset. + * Virtual registers have to be handled in device specific driver code. Chip + * driver code returns non-negative register values if a virtual register is + * supported, or a negative error code if not. The chip driver may return + * -ENODATA or any other error code in this case, though an error code other + * than -ENODATA is handled more efficiently and thus preferred. Either case, + * the calling PMBus core code will abort if the chip driver returns an error + * code when reading or writing virtual registers. + */ + PMBUS_VIRT_BASE = 0x100, + PMBUS_VIRT_READ_TEMP_AVG, + PMBUS_VIRT_READ_TEMP_MIN, + PMBUS_VIRT_READ_TEMP_MAX, + PMBUS_VIRT_RESET_TEMP_HISTORY, + PMBUS_VIRT_READ_VIN_AVG, + PMBUS_VIRT_READ_VIN_MIN, + PMBUS_VIRT_READ_VIN_MAX, + PMBUS_VIRT_RESET_VIN_HISTORY, + PMBUS_VIRT_READ_IIN_AVG, + PMBUS_VIRT_READ_IIN_MIN, + PMBUS_VIRT_READ_IIN_MAX, + PMBUS_VIRT_RESET_IIN_HISTORY, + PMBUS_VIRT_READ_PIN_AVG, + PMBUS_VIRT_READ_PIN_MIN, + PMBUS_VIRT_READ_PIN_MAX, + PMBUS_VIRT_RESET_PIN_HISTORY, + PMBUS_VIRT_READ_POUT_AVG, + PMBUS_VIRT_READ_POUT_MIN, + PMBUS_VIRT_READ_POUT_MAX, + PMBUS_VIRT_RESET_POUT_HISTORY, + PMBUS_VIRT_READ_VOUT_AVG, + PMBUS_VIRT_READ_VOUT_MIN, + PMBUS_VIRT_READ_VOUT_MAX, + PMBUS_VIRT_RESET_VOUT_HISTORY, + PMBUS_VIRT_READ_IOUT_AVG, + PMBUS_VIRT_READ_IOUT_MIN, + PMBUS_VIRT_READ_IOUT_MAX, + PMBUS_VIRT_RESET_IOUT_HISTORY, + PMBUS_VIRT_READ_TEMP2_AVG, + PMBUS_VIRT_READ_TEMP2_MIN, + PMBUS_VIRT_READ_TEMP2_MAX, + PMBUS_VIRT_RESET_TEMP2_HISTORY, + + PMBUS_VIRT_READ_VMON, + PMBUS_VIRT_VMON_UV_WARN_LIMIT, + PMBUS_VIRT_VMON_OV_WARN_LIMIT, + PMBUS_VIRT_VMON_UV_FAULT_LIMIT, + PMBUS_VIRT_VMON_OV_FAULT_LIMIT, + PMBUS_VIRT_STATUS_VMON, + + /* + * RPM and PWM Fan control + * + * Drivers wanting to expose PWM control must define the behaviour of + * PMBUS_VIRT_PWM_[1-4] and PMBUS_VIRT_PWM_ENABLE_[1-4] in the + * {read,write}_word_data callback. + * + * pmbus core provides a default implementation for + * PMBUS_VIRT_FAN_TARGET_[1-4]. + * + * TARGET, PWM and PWM_ENABLE members must be defined sequentially; + * pmbus core uses the difference between the provided register and + * it's _1 counterpart to calculate the FAN/PWM ID. + */ + PMBUS_VIRT_FAN_TARGET_1, + PMBUS_VIRT_FAN_TARGET_2, + PMBUS_VIRT_FAN_TARGET_3, + PMBUS_VIRT_FAN_TARGET_4, + PMBUS_VIRT_PWM_1, + PMBUS_VIRT_PWM_2, + PMBUS_VIRT_PWM_3, + PMBUS_VIRT_PWM_4, + PMBUS_VIRT_PWM_ENABLE_1, + PMBUS_VIRT_PWM_ENABLE_2, + PMBUS_VIRT_PWM_ENABLE_3, + PMBUS_VIRT_PWM_ENABLE_4, + + /* Samples for average + * + * Drivers wanting to expose functionality for changing the number of + * samples used for average values should implement support in + * {read,write}_word_data callback for either PMBUS_VIRT_SAMPLES if it + * applies to all types of measurements, or any number of specific + * PMBUS_VIRT_*_SAMPLES registers to allow for individual control. + */ + PMBUS_VIRT_SAMPLES, + PMBUS_VIRT_IN_SAMPLES, + PMBUS_VIRT_CURR_SAMPLES, + PMBUS_VIRT_POWER_SAMPLES, + PMBUS_VIRT_TEMP_SAMPLES, +}; + +/* + * OPERATION + */ +#define PB_OPERATION_CONTROL_ON BIT(7) + +/* + * WRITE_PROTECT + */ +#define PB_WP_ALL BIT(7) /* all but WRITE_PROTECT */ +#define PB_WP_OP BIT(6) /* all but WP, OPERATION, PAGE */ +#define PB_WP_VOUT BIT(5) /* all but WP, OPERATION, PAGE, VOUT, ON_OFF */ + +#define PB_WP_ANY (PB_WP_ALL | PB_WP_OP | PB_WP_VOUT) + +/* + * CAPABILITY + */ +#define PB_CAPABILITY_SMBALERT BIT(4) +#define PB_CAPABILITY_ERROR_CHECK BIT(7) + +/* + * VOUT_MODE + */ +#define PB_VOUT_MODE_MODE_MASK 0xe0 +#define PB_VOUT_MODE_PARAM_MASK 0x1f + +#define PB_VOUT_MODE_LINEAR 0x00 +#define PB_VOUT_MODE_VID 0x20 +#define PB_VOUT_MODE_DIRECT 0x40 + +/* + * Fan configuration + */ +#define PB_FAN_2_PULSE_MASK (BIT(0) | BIT(1)) +#define PB_FAN_2_RPM BIT(2) +#define PB_FAN_2_INSTALLED BIT(3) +#define PB_FAN_1_PULSE_MASK (BIT(4) | BIT(5)) +#define PB_FAN_1_RPM BIT(6) +#define PB_FAN_1_INSTALLED BIT(7) + +enum pmbus_fan_mode { percent = 0, rpm }; + +/* + * STATUS_BYTE, STATUS_WORD (lower) + */ +#define PB_STATUS_NONE_ABOVE BIT(0) +#define PB_STATUS_CML BIT(1) +#define PB_STATUS_TEMPERATURE BIT(2) +#define PB_STATUS_VIN_UV BIT(3) +#define PB_STATUS_IOUT_OC BIT(4) +#define PB_STATUS_VOUT_OV BIT(5) +#define PB_STATUS_OFF BIT(6) +#define PB_STATUS_BUSY BIT(7) + +/* + * STATUS_WORD (upper) + */ +#define PB_STATUS_UNKNOWN BIT(8) +#define PB_STATUS_OTHER BIT(9) +#define PB_STATUS_FANS BIT(10) +#define PB_STATUS_POWER_GOOD_N BIT(11) +#define PB_STATUS_WORD_MFR BIT(12) +#define PB_STATUS_INPUT BIT(13) +#define PB_STATUS_IOUT_POUT BIT(14) +#define PB_STATUS_VOUT BIT(15) + +/* + * STATUS_IOUT + */ +#define PB_POUT_OP_WARNING BIT(0) +#define PB_POUT_OP_FAULT BIT(1) +#define PB_POWER_LIMITING BIT(2) +#define PB_CURRENT_SHARE_FAULT BIT(3) +#define PB_IOUT_UC_FAULT BIT(4) +#define PB_IOUT_OC_WARNING BIT(5) +#define PB_IOUT_OC_LV_FAULT BIT(6) +#define PB_IOUT_OC_FAULT BIT(7) + +/* + * STATUS_VOUT, STATUS_INPUT + */ +#define PB_VOLTAGE_VIN_OFF BIT(3) +#define PB_VOLTAGE_UV_FAULT BIT(4) +#define PB_VOLTAGE_UV_WARNING BIT(5) +#define PB_VOLTAGE_OV_WARNING BIT(6) +#define PB_VOLTAGE_OV_FAULT BIT(7) + +/* + * STATUS_INPUT + */ +#define PB_PIN_OP_WARNING BIT(0) +#define PB_IIN_OC_WARNING BIT(1) +#define PB_IIN_OC_FAULT BIT(2) + +/* + * STATUS_TEMPERATURE + */ +#define PB_TEMP_UT_FAULT BIT(4) +#define PB_TEMP_UT_WARNING BIT(5) +#define PB_TEMP_OT_WARNING BIT(6) +#define PB_TEMP_OT_FAULT BIT(7) + +/* + * STATUS_FAN + */ +#define PB_FAN_AIRFLOW_WARNING BIT(0) +#define PB_FAN_AIRFLOW_FAULT BIT(1) +#define PB_FAN_FAN2_SPEED_OVERRIDE BIT(2) +#define PB_FAN_FAN1_SPEED_OVERRIDE BIT(3) +#define PB_FAN_FAN2_WARNING BIT(4) +#define PB_FAN_FAN1_WARNING BIT(5) +#define PB_FAN_FAN2_FAULT BIT(6) +#define PB_FAN_FAN1_FAULT BIT(7) + +/* + * CML_FAULT_STATUS + */ +#define PB_CML_FAULT_OTHER_MEM_LOGIC BIT(0) +#define PB_CML_FAULT_OTHER_COMM BIT(1) +#define PB_CML_FAULT_PROCESSOR BIT(3) +#define PB_CML_FAULT_MEMORY BIT(4) +#define PB_CML_FAULT_PACKET_ERROR BIT(5) +#define PB_CML_FAULT_INVALID_DATA BIT(6) +#define PB_CML_FAULT_INVALID_COMMAND BIT(7) + +enum pmbus_sensor_classes { + PSC_VOLTAGE_IN = 0, + PSC_VOLTAGE_OUT, + PSC_CURRENT_IN, + PSC_CURRENT_OUT, + PSC_POWER, + PSC_TEMPERATURE, + PSC_FAN, + PSC_PWM, + PSC_NUM_CLASSES /* Number of power sensor classes */ +}; + +#define PMBUS_PAGES 32 /* Per PMBus specification */ +#define PMBUS_PHASES 10 /* Maximum number of phases per page */ + +/* Functionality bit mask */ +#define PMBUS_HAVE_VIN BIT(0) +#define PMBUS_HAVE_VCAP BIT(1) +#define PMBUS_HAVE_VOUT BIT(2) +#define PMBUS_HAVE_IIN BIT(3) +#define PMBUS_HAVE_IOUT BIT(4) +#define PMBUS_HAVE_PIN BIT(5) +#define PMBUS_HAVE_POUT BIT(6) +#define PMBUS_HAVE_FAN12 BIT(7) +#define PMBUS_HAVE_FAN34 BIT(8) +#define PMBUS_HAVE_TEMP BIT(9) +#define PMBUS_HAVE_TEMP2 BIT(10) +#define PMBUS_HAVE_TEMP3 BIT(11) +#define PMBUS_HAVE_STATUS_VOUT BIT(12) +#define PMBUS_HAVE_STATUS_IOUT BIT(13) +#define PMBUS_HAVE_STATUS_INPUT BIT(14) +#define PMBUS_HAVE_STATUS_TEMP BIT(15) +#define PMBUS_HAVE_STATUS_FAN12 BIT(16) +#define PMBUS_HAVE_STATUS_FAN34 BIT(17) +#define PMBUS_HAVE_VMON BIT(18) +#define PMBUS_HAVE_STATUS_VMON BIT(19) +#define PMBUS_HAVE_PWM12 BIT(20) +#define PMBUS_HAVE_PWM34 BIT(21) +#define PMBUS_HAVE_SAMPLES BIT(22) + +#define PMBUS_PHASE_VIRTUAL BIT(30) /* Phases on this page are virtual */ +#define PMBUS_PAGE_VIRTUAL BIT(31) /* Page is virtual */ + +enum pmbus_data_format { linear = 0, ieee754, direct, vid }; +enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv }; + +struct pmbus_driver_info { + int pages; /* Total number of pages */ + u8 phases[PMBUS_PAGES]; /* Number of phases per page */ + enum pmbus_data_format format[PSC_NUM_CLASSES]; + enum vrm_version vrm_version[PMBUS_PAGES]; /* vrm version per page */ + /* + * Support one set of coefficients for each sensor type + * Used for chips providing data in direct mode. + */ + int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */ + int b[PSC_NUM_CLASSES]; /* offset */ + int R[PSC_NUM_CLASSES]; /* exponent */ + + u32 func[PMBUS_PAGES]; /* Functionality, per page */ + u32 pfunc[PMBUS_PHASES];/* Functionality, per phase */ + /* + * The following functions map manufacturing specific register values + * to PMBus standard register values. Specify only if mapping is + * necessary. + * Functions return the register value (read) or zero (write) if + * successful. A return value of -ENODATA indicates that there is no + * manufacturer specific register, but that a standard PMBus register + * may exist. Any other negative return value indicates that the + * register does not exist, and that no attempt should be made to read + * the standard register. + */ + int (*read_byte_data)(struct i2c_client *client, int page, int reg); + int (*read_word_data)(struct i2c_client *client, int page, int phase, + int reg); + int (*write_byte_data)(struct i2c_client *client, int page, int reg, + u8 byte); + int (*write_word_data)(struct i2c_client *client, int page, int reg, + u16 word); + int (*write_byte)(struct i2c_client *client, int page, u8 value); + /* + * The identify function determines supported PMBus functionality. + * This function is only necessary if a chip driver supports multiple + * chips, and the chip functionality is not pre-determined. + */ + int (*identify)(struct i2c_client *client, + struct pmbus_driver_info *info); + + /* Regulator functionality, if supported by this chip driver. */ + int num_regulators; + const struct regulator_desc *reg_desc; + + /* custom attributes */ + const struct attribute_group **groups; +}; + +/* Regulator ops */ + +extern const struct regulator_ops pmbus_regulator_ops; + +/* Macros for filling in array of struct regulator_desc */ +#define PMBUS_REGULATOR_STEP(_name, _id, _voltages, _step) \ + [_id] = { \ + .name = (_name # _id), \ + .id = (_id), \ + .of_match = of_match_ptr(_name # _id), \ + .regulators_node = of_match_ptr("regulators"), \ + .ops = &pmbus_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .n_voltages = _voltages, \ + .uV_step = _step, \ + } + +#define PMBUS_REGULATOR(_name, _id) PMBUS_REGULATOR_STEP(_name, _id, 0, 0) + +/* Function declarations */ + +void pmbus_clear_cache(struct i2c_client *client); +void pmbus_set_update(struct i2c_client *client, u8 reg, bool update); +int pmbus_set_page(struct i2c_client *client, int page, int phase); +int pmbus_read_word_data(struct i2c_client *client, int page, int phase, + u8 reg); +int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg, + u16 word); +int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg); +int pmbus_write_byte(struct i2c_client *client, int page, u8 value); +int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, + u8 value); +int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg, + u8 mask, u8 value); +void pmbus_clear_faults(struct i2c_client *client); +bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); +bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); +int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info); +const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client + *client); +int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id, + enum pmbus_fan_mode mode); +int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id, + enum pmbus_fan_mode mode); +int pmbus_update_fan(struct i2c_client *client, int page, int id, + u8 config, u8 mask, u16 command); +struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client); + +#endif /* PMBUS_H */ |