1 files changed, 148 insertions, 0 deletions
diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c
new file mode 100644
index 000000000..1650d3b4c
--- /dev/null
+++ b/drivers/hwmon/raspberrypi-hwmon.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Raspberry Pi voltage sensor driver
+ *
+ * Based on firmware/raspberrypi.c by Noralf Trønnes
+ *
+ * Copyright (C) 2018 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+#include <linux/device.h>
+#include <linux/devm-helpers.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+#define UNDERVOLTAGE_STICKY_BIT	BIT(16)
+
+struct rpi_hwmon_data {
+	struct device *hwmon_dev;
+	struct rpi_firmware *fw;
+	u32 last_throttled;
+	struct delayed_work get_values_poll_work;
+};
+
+static void rpi_firmware_get_throttled(struct rpi_hwmon_data *data)
+{
+	u32 new_uv, old_uv, value;
+	int ret;
+
+	/* Request firmware to clear sticky bits */
+	value = 0xffff;
+
+	ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED,
+				    &value, sizeof(value));
+	if (ret) {
+		dev_err_once(data->hwmon_dev, "Failed to get throttled (%d)\n",
+			     ret);
+		return;
+	}
+
+	new_uv = value & UNDERVOLTAGE_STICKY_BIT;
+	old_uv = data->last_throttled & UNDERVOLTAGE_STICKY_BIT;
+	data->last_throttled = value;
+
+	if (new_uv == old_uv)
+		return;
+
+	if (new_uv)
+		dev_crit(data->hwmon_dev, "Undervoltage detected!\n");
+	else
+		dev_info(data->hwmon_dev, "Voltage normalised\n");
+
+	hwmon_notify_event(data->hwmon_dev, hwmon_in, hwmon_in_lcrit_alarm, 0);
+}
+
+static void get_values_poll(struct work_struct *work)
+{
+	struct rpi_hwmon_data *data;
+
+	data = container_of(work, struct rpi_hwmon_data,
+			    get_values_poll_work.work);
+
+	rpi_firmware_get_throttled(data);
+
+	/*
+	 * We can't run faster than the sticky shift (100ms) since we get
+	 * flipping in the sticky bits that are cleared.
+	 */
+	schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
+}
+
+static int rpi_read(struct device *dev, enum hwmon_sensor_types type,
+		    u32 attr, int channel, long *val)
+{
+	struct rpi_hwmon_data *data = dev_get_drvdata(dev);
+
+	*val = !!(data->last_throttled & UNDERVOLTAGE_STICKY_BIT);
+	return 0;
+}
+
+static umode_t rpi_is_visible(const void *_data, enum hwmon_sensor_types type,
+			      u32 attr, int channel)
+{
+	return 0444;
+}
+
+static const struct hwmon_channel_info *rpi_info[] = {
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_LCRIT_ALARM),
+	NULL
+};
+
+static const struct hwmon_ops rpi_hwmon_ops = {
+	.is_visible = rpi_is_visible,
+	.read = rpi_read,
+};
+
+static const struct hwmon_chip_info rpi_chip_info = {
+	.ops = &rpi_hwmon_ops,
+	.info = rpi_info,
+};
+
+static int rpi_hwmon_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rpi_hwmon_data *data;
+	int ret;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* Parent driver assure that firmware is correct */
+	data->fw = dev_get_drvdata(dev->parent);
+
+	data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt",
+							       data,
+							       &rpi_chip_info,
+							       NULL);
+	if (IS_ERR(data->hwmon_dev))
+		return PTR_ERR(data->hwmon_dev);
+
+	ret = devm_delayed_work_autocancel(dev, &data->get_values_poll_work,
+					   get_values_poll);
+	if (ret)
+		return ret;
+	platform_set_drvdata(pdev, data);
+
+	schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
+
+	return 0;
+}
+
+static struct platform_driver rpi_hwmon_driver = {
+	.probe = rpi_hwmon_probe,
+	.driver = {
+		.name = "raspberrypi-hwmon",
+	},
+};
+module_platform_driver(rpi_hwmon_driver);
+
+MODULE_AUTHOR("Stefan Wahren <wahrenst@gmx.net>");
+MODULE_DESCRIPTION("Raspberry Pi voltage sensor driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:raspberrypi-hwmon");