diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 831 |
1 files changed, 831 insertions, 0 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig new file mode 100644 index 000000000..00292118b --- /dev/null +++ b/drivers/input/keyboard/Kconfig @@ -0,0 +1,831 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Input core configuration +# +menuconfig INPUT_KEYBOARD + bool "Keyboards" + default y + help + Say Y here, and a list of supported keyboards will be displayed. + This option doesn't affect the kernel. + + If unsure, say Y. + +if INPUT_KEYBOARD + +config KEYBOARD_ADC + tristate "ADC Ladder Buttons" + depends on IIO + help + This driver implements support for buttons connected + to an ADC using a resistor ladder. + + Say Y here if your device has such buttons connected to an ADC. Your + board-specific setup logic must also provide a configuration data + for mapping voltages to buttons. + + To compile this driver as a module, choose M here: the + module will be called adc_keys. + +config KEYBOARD_ADP5520 + tristate "Keypad Support for ADP5520 PMIC" + depends on PMIC_ADP5520 + help + This option enables support for the keypad scan matrix + on Analog Devices ADP5520 PMICs. + + To compile this driver as a module, choose M here: the module will + be called adp5520-keys. + +config KEYBOARD_ADP5588 + tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander" + depends on I2C + select GPIOLIB + select GPIOLIB_IRQCHIP + select INPUT_MATRIXKMAP + help + Say Y here if you want to use a ADP5588/87 attached to your + system I2C bus. + + To compile this driver as a module, choose M here: the + module will be called adp5588-keys. + +config KEYBOARD_ADP5589 + tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander" + depends on I2C + help + Say Y here if you want to use a ADP5585/ADP5589 attached to your + system I2C bus. + + To compile this driver as a module, choose M here: the + module will be called adp5589-keys. + +config KEYBOARD_AMIGA + tristate "Amiga keyboard" + depends on AMIGA + help + Say Y here if you are running Linux on any AMIGA and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called amikbd. + +config KEYBOARD_APPLESPI + tristate "Apple SPI keyboard and trackpad" + depends on ACPI && EFI + depends on SPI + depends on X86 || COMPILE_TEST + depends on LEDS_CLASS + select CRC16 + help + Say Y here if you are running Linux on any Apple MacBook8,1 or later, + or any MacBookPro13,* or MacBookPro14,*. + + You will also need to enable appropriate SPI master controllers: + spi_pxa2xx_platform and spi_pxa2xx_pci for MacBook8,1, and + spi_pxa2xx_platform and intel_lpss_pci for the rest. + + To compile this driver as a module, choose M here: the + module will be called applespi. + +config KEYBOARD_ATARI + tristate "Atari keyboard" + depends on ATARI + select ATARI_KBD_CORE + help + Say Y here if you are running Linux on any Atari and have a keyboard + attached. + + To compile this driver as a module, choose M here: the + module will be called atakbd. + +config KEYBOARD_ATKBD + tristate "AT keyboard" + default y + select SERIO + select SERIO_LIBPS2 + select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO + select SERIO_GSCPS2 if GSC + select INPUT_VIVALDIFMAP + help + Say Y here if you want to use a standard AT or PS/2 keyboard. Usually + you'll need this, unless you have a different type keyboard (USB, ADB + or other). This also works for AT and PS/2 keyboards connected over a + PS/2 to serial converter. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called atkbd. + +config KEYBOARD_ATKBD_HP_KEYCODES + bool "Use HP keyboard scancodes" + depends on PARISC && KEYBOARD_ATKBD + default y + help + Say Y here if you have a PA-RISC machine and want to use an AT or + PS/2 keyboard, and your keyboard uses keycodes that are specific to + PA-RISC keyboards. + + Say N if you use a standard keyboard. + +config KEYBOARD_ATKBD_RDI_KEYCODES + bool "Use PrecisionBook keyboard scancodes" + depends on KEYBOARD_ATKBD_HP_KEYCODES + default n + help + If you have an RDI PrecisionBook, say Y here if you want to use its + built-in keyboard (as opposed to an external keyboard). + + The PrecisionBook has five keys that conflict with those used by most + AT and PS/2 keyboards. These are as follows: + + PrecisionBook Standard AT or PS/2 + + F1 F12 + Left Ctrl Left Alt + Caps Lock Left Ctrl + Right Ctrl Caps Lock + Left 102nd key (the key to the right of Left Shift) + + If you say N here, and use the PrecisionBook keyboard, then each key + in the left-hand column will be interpreted as the corresponding key + in the right-hand column. + + If you say Y here, and use an external keyboard, then each key in the + right-hand column will be interpreted as the key shown in the + left-hand column. + +config KEYBOARD_QT1050 + tristate "Microchip AT42QT1050 Touch Sensor Chip" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to use Microchip AT42QT1050 QTouch + Sensor chip as input device. + + To compile this driver as a module, choose M here: + the module will be called qt1050 + +config KEYBOARD_QT1070 + tristate "Atmel AT42QT1070 Touch Sensor Chip" + depends on I2C + help + Say Y here if you want to use Atmel AT42QT1070 QTouch + Sensor chip as input device. + + To compile this driver as a module, choose M here: + the module will be called qt1070 + +config KEYBOARD_QT2160 + tristate "Atmel AT42QT2160 Touch Sensor Chip" + depends on I2C + help + If you say yes here you get support for Atmel AT42QT2160 Touch + Sensor chip as a keyboard input. + + This driver can also be built as a module. If so, the module + will be called qt2160. + +config KEYBOARD_CLPS711X + tristate "CLPS711X Keypad support" + depends on ARCH_CLPS711X || COMPILE_TEST + select INPUT_MATRIXKMAP + help + Say Y here to enable the matrix keypad on the Cirrus Logic + CLPS711X CPUs. + + To compile this driver as a module, choose M here: the + module will be called clps711x-keypad. + +config KEYBOARD_DLINK_DIR685 + tristate "D-Link DIR-685 touchkeys support" + depends on I2C + default ARCH_GEMINI + help + If you say yes here you get support for the D-Link DIR-685 + touchkeys. + + To compile this driver as a module, choose M here: the + module will be called dlink-dir685-touchkeys. + +config KEYBOARD_LKKBD + tristate "DECstation/VAXstation LK201/LK401 keyboard" + select SERIO + help + Say Y here if you want to use a LK201 or LK401 style serial + keyboard. This keyboard is also usable on PCs if you attach + it with the inputattach program. The connector pinout is + described within lkkbd.c. + + To compile this driver as a module, choose M here: the + module will be called lkkbd. + +config KEYBOARD_EP93XX + tristate "EP93xx Matrix Keypad support" + depends on ARCH_EP93XX || COMPILE_TEST + select INPUT_MATRIXKMAP + help + Say Y here to enable the matrix keypad on the Cirrus EP93XX. + + To compile this driver as a module, choose M here: the + module will be called ep93xx_keypad. + +config KEYBOARD_GPIO + tristate "GPIO Buttons" + depends on GPIOLIB || COMPILE_TEST + help + This driver implements support for buttons connected + to GPIO pins of various CPUs (and some other chips). + + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. + + To compile this driver as a module, choose M here: the + module will be called gpio_keys. + +config KEYBOARD_GPIO_POLLED + tristate "Polled GPIO buttons" + depends on GPIOLIB + help + This driver implements support for buttons connected + to GPIO pins that are not capable of generating interrupts. + + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. + + To compile this driver as a module, choose M here: the + module will be called gpio_keys_polled. + +config KEYBOARD_TCA6416 + tristate "TCA6416/TCA6408A Keypad Support" + depends on I2C + help + This driver implements basic keypad functionality + for keys connected through TCA6416/TCA6408A IO expanders. + + Say Y here if your device has keys connected to + TCA6416/TCA6408A IO expander. Your board-specific setup logic + must also provide pin-mask details(of which TCA6416 pins + are used for keypad). + + If enabled the entire TCA6416 device will be managed through + this driver. + + To compile this driver as a module, choose M here: the + module will be called tca6416_keypad. + +config KEYBOARD_TCA8418 + tristate "TCA8418 Keypad Support" + depends on I2C + select INPUT_MATRIXKMAP + help + This driver implements basic keypad functionality + for keys connected through TCA8418 keypad decoder. + + Say Y here if your device has keys connected to + TCA8418 keypad decoder. + + If enabled the complete TCA8418 device will be managed through + this driver. + + To compile this driver as a module, choose M here: the + module will be called tca8418_keypad. + +config KEYBOARD_MATRIX + tristate "GPIO driven matrix keypad support" + depends on GPIOLIB || COMPILE_TEST + select INPUT_MATRIXKMAP + help + Enable support for GPIO driven matrix keypad. + + To compile this driver as a module, choose M here: the + module will be called matrix_keypad. + +config KEYBOARD_HIL_OLD + tristate "HP HIL keyboard support (simple driver)" + depends on GSC || HP300 + default y + help + The "Human Interface Loop" is a older, 8-channel USB-like + controller used in several Hewlett Packard models. This driver + was adapted from the one written for m68k/hp300, and implements + support for a keyboard attached to the HIL port, but not for + any other types of HIL input devices like mice or tablets. + However, it has been thoroughly tested and is stable. + + If you want full HIL support including support for multiple + keyboards, mice, and tablets, you have to enable the + "HP System Device Controller i8042 Support" in the input/serio + submenu. + +config KEYBOARD_HIL + tristate "HP HIL keyboard/pointer support" + depends on GSC || HP300 + default y + select HP_SDC + select HIL_MLC + select SERIO + help + The "Human Interface Loop" is a older, 8-channel USB-like + controller used in several Hewlett Packard models. + This driver implements support for HIL-keyboards and pointing + devices (mice, tablets, touchscreens) attached + to your machine, so normally you should say Y here. + +config KEYBOARD_HP6XX + tristate "HP Jornada 6xx keyboard" + depends on SH_HP6XX + help + Say Y here if you have a HP Jornada 620/660/680/690 and want to + support the built-in keyboard. + + To compile this driver as a module, choose M here: the + module will be called jornada680_kbd. + +config KEYBOARD_HP7XX + tristate "HP Jornada 7xx keyboard" + depends on SA1100_JORNADA720_SSP && SA1100_SSP + help + Say Y here if you have a HP Jornada 710/720/728 and want to + support the built-in keyboard. + + To compile this driver as a module, choose M here: the + module will be called jornada720_kbd. + +config KEYBOARD_LM8323 + tristate "LM8323 keypad chip" + depends on I2C + depends on LEDS_CLASS + help + If you say yes here you get support for the National Semiconductor + LM8323 keypad controller. + + To compile this driver as a module, choose M here: the + module will be called lm8323. + +config KEYBOARD_LM8333 + tristate "LM8333 keypad chip" + depends on I2C + select INPUT_MATRIXKMAP + help + If you say yes here you get support for the National Semiconductor + LM8333 keypad controller. + + To compile this driver as a module, choose M here: the + module will be called lm8333. + +config KEYBOARD_LOCOMO + tristate "LoCoMo Keyboard Support" + depends on SHARP_LOCOMO + help + Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA + + To compile this driver as a module, choose M here: the + module will be called locomokbd. + +config KEYBOARD_LPC32XX + tristate "LPC32XX matrix key scanner support" + depends on ARCH_LPC32XX && OF + select INPUT_MATRIXKMAP + help + Say Y here if you want to use NXP LPC32XX SoC key scanner interface, + connected to a key matrix. + + To compile this driver as a module, choose M here: the + module will be called lpc32xx-keys. + +config KEYBOARD_MAPLE + tristate "Maple bus keyboard" + depends on SH_DREAMCAST && MAPLE + help + Say Y here if you have a Dreamcast console running Linux and have + a keyboard attached to its Maple bus. + + To compile this driver as a module, choose M here: the + module will be called maple_keyb. + +config KEYBOARD_MAX7359 + tristate "Maxim MAX7359 Key Switch Controller" + select INPUT_MATRIXKMAP + depends on I2C + help + If you say yes here you get support for the Maxim MAX7359 Key + Switch Controller chip. This providers microprocessors with + management of up to 64 key switches + + To compile this driver as a module, choose M here: the + module will be called max7359_keypad. + +config KEYBOARD_MCS + tristate "MELFAS MCS Touchkey" + depends on I2C + help + Say Y here if you have the MELFAS MCS5000/5080 touchkey controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mcs_touchkey. + +config KEYBOARD_MPR121 + tristate "Freescale MPR121 Touchkey" + depends on I2C + help + Say Y here if you have Freescale MPR121 touchkey controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mpr121_touchkey. + +config KEYBOARD_SNVS_PWRKEY + tristate "IMX SNVS Power Key Driver" + depends on ARCH_MXC || (COMPILE_TEST && HAS_IOMEM) + depends on OF + help + This is the snvs powerkey driver for the Freescale i.MX application + processors. + + To compile this driver as a module, choose M here; the + module will be called snvs_pwrkey. + +config KEYBOARD_IMX + tristate "IMX keypad support" + depends on ARCH_MXC || COMPILE_TEST + select INPUT_MATRIXKMAP + help + Enable support for IMX keypad port. + + To compile this driver as a module, choose M here: the + module will be called imx_keypad. + +config KEYBOARD_IMX_SC_KEY + tristate "IMX SCU Key Driver" + depends on IMX_SCU + help + This is the system controller key driver for NXP i.MX SoCs with + system controller inside. + + To compile this driver as a module, choose M here: the + module will be called imx_sc_key. + +config KEYBOARD_NEWTON + tristate "Newton keyboard" + select SERIO + help + Say Y here if you have a Newton keyboard on a serial port. + + To compile this driver as a module, choose M here: the + module will be called newtonkbd. + +config KEYBOARD_NOMADIK + tristate "ST-Ericsson Nomadik SKE keyboard" + depends on (ARCH_NOMADIK || ARCH_U8500) + select INPUT_MATRIXKMAP + help + Say Y here if you want to use a keypad provided on the SKE controller + used on the Ux500 and Nomadik platforms + + To compile this driver as a module, choose M here: the + module will be called nmk-ske-keypad. + +config KEYBOARD_NSPIRE + tristate "TI-NSPIRE built-in keyboard" + depends on ARCH_NSPIRE && OF + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the built-in keypad on TI-NSPIRE. + + To compile this driver as a module, choose M here: the + module will be called nspire-keypad. + +config KEYBOARD_TEGRA + tristate "NVIDIA Tegra internal matrix keyboard controller support" + depends on ARCH_TEGRA && OF + select INPUT_MATRIXKMAP + help + Say Y here if you want to use a matrix keyboard connected directly + to the internal keyboard controller on Tegra SoCs. + + To compile this driver as a module, choose M here: the + module will be called tegra-kbc. + +config KEYBOARD_OPENCORES + tristate "OpenCores Keyboard Controller" + depends on HAS_IOMEM + help + Say Y here if you want to use the OpenCores Keyboard Controller + http://www.opencores.org/project,keyboardcontroller + + To compile this driver as a module, choose M here; the + module will be called opencores-kbd. + +config KEYBOARD_PINEPHONE + tristate "Pine64 PinePhone Keyboard" + depends on I2C && REGULATOR + select CRC8 + select INPUT_MATRIXKMAP + help + Say Y here to enable support for the keyboard in the Pine64 PinePhone + keyboard case. This driver supports the FLOSS firmware available at + https://megous.com/git/pinephone-keyboard/ + + To compile this driver as a module, choose M here; the + module will be called pinephone-keyboard. + +config KEYBOARD_PXA27x + tristate "PXA27x/PXA3xx keypad support" + depends on PXA27x || PXA3xx || ARCH_MMP + select INPUT_MATRIXKMAP + help + Enable support for PXA27x/PXA3xx keypad controller. + + To compile this driver as a module, choose M here: the + module will be called pxa27x_keypad. + +config KEYBOARD_PXA930_ROTARY + tristate "PXA930/PXA935 Enhanced Rotary Controller Support" + depends on CPU_PXA930 || CPU_PXA935 + help + Enable support for PXA930/PXA935 Enhanced Rotary Controller. + + To compile this driver as a module, choose M here: the + module will be called pxa930_rotary. + +config KEYBOARD_PMIC8XXX + tristate "Qualcomm PMIC8XXX keypad support" + depends on MFD_PM8XXX + select INPUT_MATRIXKMAP + help + Say Y here if you want to enable the driver for the PMIC8XXX + keypad provided as a reference design from Qualcomm. This is intended + to support upto 18x8 matrix based keypad design. + + To compile this driver as a module, choose M here: the module will + be called pmic8xxx-keypad. + +config KEYBOARD_SAMSUNG + tristate "Samsung keypad support" + depends on HAS_IOMEM && HAVE_CLK + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the keypad on your Samsung mobile + device. + + To compile this driver as a module, choose M here: the + module will be called samsung-keypad. + +config KEYBOARD_GOLDFISH_EVENTS + depends on GOLDFISH || COMPILE_TEST + tristate "Generic Input Event device for Goldfish" + help + Say Y here to get an input event device for the Goldfish virtual + device emulator. + + To compile this driver as a module, choose M here: the + module will be called goldfish-events. + +config KEYBOARD_STOWAWAY + tristate "Stowaway keyboard" + select SERIO + help + Say Y here if you have a Stowaway keyboard on a serial port. + Stowaway compatible keyboards like Dicota Input-PDA keyboard + are also supported by this driver. + + To compile this driver as a module, choose M here: the + module will be called stowaway. + +config KEYBOARD_ST_KEYSCAN + tristate "STMicroelectronics keyscan support" + depends on ARCH_STI || COMPILE_TEST + select INPUT_MATRIXKMAP + help + Say Y here if you want to use a keypad attached to the keyscan block + on some STMicroelectronics SoC devices. + + To compile this driver as a module, choose M here: the + module will be called st-keyscan. + +config KEYBOARD_SUNKBD + tristate "Sun Type 4 and Type 5 keyboard" + select SERIO + help + Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, + connected either to the Sun keyboard connector or to an serial + (RS-232) port via a simple adapter. + + To compile this driver as a module, choose M here: the + module will be called sunkbd. + +config KEYBOARD_SH_KEYSC + tristate "SuperH KEYSC keypad support" + depends on ARCH_SHMOBILE || COMPILE_TEST + help + Say Y here if you want to use a keypad attached to the KEYSC block + on SuperH processors such as sh7722 and sh7343. + + To compile this driver as a module, choose M here: the + module will be called sh_keysc. + +config KEYBOARD_STMPE + tristate "STMPE keypad support" + depends on MFD_STMPE + depends on OF + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the keypad controller on STMPE I/O + expanders. + + To compile this driver as a module, choose M here: the module will be + called stmpe-keypad. + +config KEYBOARD_SUN4I_LRADC + tristate "Allwinner sun4i low res adc attached tablet keys support" + depends on ARCH_SUNXI + help + This selects support for the Allwinner low res adc attached tablet + keys found on Allwinner sunxi SoCs. + + To compile this driver as a module, choose M here: the + module will be called sun4i-lradc-keys. + +config KEYBOARD_DAVINCI + tristate "TI DaVinci Key Scan" + depends on ARCH_DAVINCI_DM365 + help + Say Y to enable keypad module support for the TI DaVinci + platforms (DM365). + + To compile this driver as a module, choose M here: the + module will be called davinci_keyscan. + +config KEYBOARD_IPAQ_MICRO + tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)" + depends on MFD_IPAQ_MICRO + help + Say Y to enable support for the buttons attached to + Micro peripheral controller on iPAQ h3100/h3600/h3700 + + To compile this driver as a module, choose M here: the + module will be called ipaq-micro-keys. + +config KEYBOARD_IQS62X + tristate "Azoteq IQS620A/621/622/624/625 keys and switches" + depends on MFD_IQS62X + help + Say Y here to enable key and switch support for the Azoteq IQS620A, + IQS621, IQS622, IQS624 and IQS625 multi-function sensors. + + To compile this driver as a module, choose M here: the module will + be called iqs62x-keys. + +config KEYBOARD_OMAP + tristate "TI OMAP keypad support" + depends on ARCH_OMAP1 + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the OMAP keypad. + + To compile this driver as a module, choose M here: the + module will be called omap-keypad. + +config KEYBOARD_OMAP4 + tristate "TI OMAP4+ keypad support" + depends on (OF && HAS_IOMEM) || ARCH_OMAP2PLUS + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the OMAP4+ keypad. + + To compile this driver as a module, choose M here: the + module will be called omap4-keypad. + +config KEYBOARD_SPEAR + tristate "ST SPEAR keyboard support" + depends on PLAT_SPEAR + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the SPEAR keyboard. + + To compile this driver as a module, choose M here: the + module will be called spear-keyboard. + +config KEYBOARD_TC3589X + tristate "TC3589X Keypad support" + depends on MFD_TC3589X + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the keypad controller on + TC35892/3 I/O expander. + + To compile this driver as a module, choose M here: the + module will be called tc3589x-keypad. + +config KEYBOARD_TM2_TOUCHKEY + tristate "TM2 touchkey support" + depends on I2C + depends on LEDS_CLASS + help + Say Y here to enable device driver for tm2-touchkey with + LED control for the Exynos5433 TM2 board. + + To compile this driver as a module, choose M here. + module will be called tm2-touchkey. + +config KEYBOARD_TWL4030 + tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" + depends on TWL4030_CORE + select INPUT_MATRIXKMAP + help + Say Y here if your board use the keypad controller on + TWL4030 family chips. It's safe to say enable this + even on boards that don't use the keypad controller. + + To compile this driver as a module, choose M here: the + module will be called twl4030_keypad. + +config KEYBOARD_XTKBD + tristate "XT keyboard" + select SERIO + help + Say Y here if you want to use the old IBM PC/XT keyboard (or + compatible) on your system. This is only possible with a + parallel port keyboard adapter, you cannot connect it to the + keyboard port on a PC that runs Linux. + + To compile this driver as a module, choose M here: the + module will be called xtkbd. + +config KEYBOARD_CROS_EC + tristate "ChromeOS EC keyboard" + select INPUT_MATRIXKMAP + select INPUT_VIVALDIFMAP + depends on CROS_EC + help + Say Y here to enable the matrix keyboard used by ChromeOS devices + and implemented on the ChromeOS EC. You must enable one bus option + (CROS_EC_I2C or CROS_EC_SPI) to use this. + + To compile this driver as a module, choose M here: the + module will be called cros_ec_keyb. + +config KEYBOARD_CAP11XX + tristate "Microchip CAP11XX based touch sensors" + depends on OF && I2C + select REGMAP_I2C + help + Say Y here to enable the CAP11XX touch sensor driver. + + To compile this driver as a module, choose M here: the + module will be called cap11xx. + +config KEYBOARD_BCM + tristate "Broadcom keypad driver" + depends on OF && HAVE_CLK && HAS_IOMEM + select INPUT_MATRIXKMAP + default ARCH_BCM_CYGNUS + help + Say Y here if you want to use Broadcom keypad. + + To compile this driver as a module, choose M here: the + module will be called bcm-keypad. + +config KEYBOARD_MT6779 + tristate "MediaTek Keypad Support" + depends on ARCH_MEDIATEK || COMPILE_TEST + select REGMAP_MMIO + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the keypad on MediaTek SoCs. + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mt6779-keypad. + +config KEYBOARD_MTK_PMIC + tristate "MediaTek PMIC keys support" + depends on MFD_MT6397 || COMPILE_TEST + help + Say Y here if you want to use the pmic keys (powerkey/homekey). + + To compile this driver as a module, choose M here: the + module will be called pmic-keys. + +config KEYBOARD_CYPRESS_SF + tristate "Cypress StreetFighter touchkey support" + depends on I2C + help + Say Y here if you want to enable support for Cypress StreetFighter + touchkeys. + + To compile this driver as a module, choose M here: the + module will be called cypress-sf. + +endif |