diff options
Diffstat (limited to 'drivers/media/i2c/ml86v7667.c')
| -rw-r--r-- | drivers/media/i2c/ml86v7667.c | 446 |
1 files changed, 446 insertions, 0 deletions
diff --git a/drivers/media/i2c/ml86v7667.c b/drivers/media/i2c/ml86v7667.c new file mode 100644 index 000000000..49ec59b0c --- /dev/null +++ b/drivers/media/i2c/ml86v7667.c @@ -0,0 +1,446 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * OKI Semiconductor ML86V7667 video decoder driver + * + * Author: Vladimir Barinov <source@cogentembedded.com> + * Copyright (C) 2013 Cogent Embedded, Inc. + * Copyright (C) 2013 Renesas Solutions Corp. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-ctrls.h> + +#define DRV_NAME "ml86v7667" + +/* Subaddresses */ +#define MRA_REG 0x00 /* Mode Register A */ +#define MRC_REG 0x02 /* Mode Register C */ +#define LUMC_REG 0x0C /* Luminance Control */ +#define CLC_REG 0x10 /* Contrast level control */ +#define SSEPL_REG 0x11 /* Sync separation level */ +#define CHRCA_REG 0x12 /* Chrominance Control A */ +#define ACCC_REG 0x14 /* ACC Loop filter & Chrominance control */ +#define ACCRC_REG 0x15 /* ACC Reference level control */ +#define HUE_REG 0x16 /* Hue control */ +#define ADC2_REG 0x1F /* ADC Register 2 */ +#define PLLR1_REG 0x20 /* PLL Register 1 */ +#define STATUS_REG 0x2C /* STATUS Register */ + +/* Mode Register A register bits */ +#define MRA_OUTPUT_MODE_MASK (3 << 6) +#define MRA_ITUR_BT601 (1 << 6) +#define MRA_ITUR_BT656 (0 << 6) +#define MRA_INPUT_MODE_MASK (7 << 3) +#define MRA_PAL_BT601 (4 << 3) +#define MRA_NTSC_BT601 (0 << 3) +#define MRA_REGISTER_MODE (1 << 0) + +/* Mode Register C register bits */ +#define MRC_AUTOSELECT (1 << 7) + +/* Luminance Control register bits */ +#define LUMC_ONOFF_SHIFT 7 +#define LUMC_ONOFF_MASK (1 << 7) + +/* Contrast level control register bits */ +#define CLC_CONTRAST_ONOFF (1 << 7) +#define CLC_CONTRAST_MASK 0x0F + +/* Sync separation level register bits */ +#define SSEPL_LUMINANCE_ONOFF (1 << 7) +#define SSEPL_LUMINANCE_MASK 0x7F + +/* Chrominance Control A register bits */ +#define CHRCA_MODE_SHIFT 6 +#define CHRCA_MODE_MASK (1 << 6) + +/* ACC Loop filter & Chrominance control register bits */ +#define ACCC_CHROMA_CR_SHIFT 3 +#define ACCC_CHROMA_CR_MASK (7 << 3) +#define ACCC_CHROMA_CB_SHIFT 0 +#define ACCC_CHROMA_CB_MASK (7 << 0) + +/* ACC Reference level control register bits */ +#define ACCRC_CHROMA_MASK 0xfc +#define ACCRC_CHROMA_SHIFT 2 + +/* ADC Register 2 register bits */ +#define ADC2_CLAMP_VOLTAGE_MASK (7 << 1) +#define ADC2_CLAMP_VOLTAGE(n) ((n & 7) << 1) + +/* PLL Register 1 register bits */ +#define PLLR1_FIXED_CLOCK (1 << 7) + +/* STATUS Register register bits */ +#define STATUS_HLOCK_DETECT (1 << 3) +#define STATUS_NTSCPAL (1 << 2) + +struct ml86v7667_priv { + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + v4l2_std_id std; +}; + +static inline struct ml86v7667_priv *to_ml86v7667(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct ml86v7667_priv, sd); +} + +static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct ml86v7667_priv, hdl)->sd; +} + +static int ml86v7667_mask_set(struct i2c_client *client, const u8 reg, + const u8 mask, const u8 data) +{ + int val = i2c_smbus_read_byte_data(client, reg); + if (val < 0) + return val; + + val = (val & ~mask) | (data & mask); + return i2c_smbus_write_byte_data(client, reg, val); +} + +static int ml86v7667_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret = -EINVAL; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ret = ml86v7667_mask_set(client, SSEPL_REG, + SSEPL_LUMINANCE_MASK, ctrl->val); + break; + case V4L2_CID_CONTRAST: + ret = ml86v7667_mask_set(client, CLC_REG, + CLC_CONTRAST_MASK, ctrl->val); + break; + case V4L2_CID_CHROMA_GAIN: + ret = ml86v7667_mask_set(client, ACCRC_REG, ACCRC_CHROMA_MASK, + ctrl->val << ACCRC_CHROMA_SHIFT); + break; + case V4L2_CID_HUE: + ret = ml86v7667_mask_set(client, HUE_REG, ~0, ctrl->val); + break; + case V4L2_CID_RED_BALANCE: + ret = ml86v7667_mask_set(client, ACCC_REG, + ACCC_CHROMA_CR_MASK, + ctrl->val << ACCC_CHROMA_CR_SHIFT); + break; + case V4L2_CID_BLUE_BALANCE: + ret = ml86v7667_mask_set(client, ACCC_REG, + ACCC_CHROMA_CB_MASK, + ctrl->val << ACCC_CHROMA_CB_SHIFT); + break; + case V4L2_CID_SHARPNESS: + ret = ml86v7667_mask_set(client, LUMC_REG, + LUMC_ONOFF_MASK, + ctrl->val << LUMC_ONOFF_SHIFT); + break; + case V4L2_CID_COLOR_KILLER: + ret = ml86v7667_mask_set(client, CHRCA_REG, + CHRCA_MODE_MASK, + ctrl->val << CHRCA_MODE_SHIFT); + break; + } + + return ret; +} + +static int ml86v7667_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int status; + + status = i2c_smbus_read_byte_data(client, STATUS_REG); + if (status < 0) + return status; + + if (status & STATUS_HLOCK_DETECT) + *std &= status & STATUS_NTSCPAL ? V4L2_STD_625_50 : V4L2_STD_525_60; + else + *std = V4L2_STD_UNKNOWN; + + return 0; +} + +static int ml86v7667_g_input_status(struct v4l2_subdev *sd, u32 *status) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int status_reg; + + status_reg = i2c_smbus_read_byte_data(client, STATUS_REG); + if (status_reg < 0) + return status_reg; + + *status = status_reg & STATUS_HLOCK_DETECT ? 0 : V4L2_IN_ST_NO_SIGNAL; + + return 0; +} + +static int ml86v7667_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->pad || code->index > 0) + return -EINVAL; + + code->code = MEDIA_BUS_FMT_YUYV8_2X8; + + return 0; +} + +static int ml86v7667_fill_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct ml86v7667_priv *priv = to_ml86v7667(sd); + struct v4l2_mbus_framefmt *fmt = &format->format; + + if (format->pad) + return -EINVAL; + + fmt->code = MEDIA_BUS_FMT_YUYV8_2X8; + fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; + /* The top field is always transferred first by the chip */ + fmt->field = V4L2_FIELD_INTERLACED_TB; + fmt->width = 720; + fmt->height = priv->std & V4L2_STD_525_60 ? 480 : 576; + + return 0; +} + +static int ml86v7667_get_mbus_config(struct v4l2_subdev *sd, + unsigned int pad, + struct v4l2_mbus_config *cfg) +{ + cfg->type = V4L2_MBUS_BT656; + cfg->bus.parallel.flags = V4L2_MBUS_MASTER | + V4L2_MBUS_PCLK_SAMPLE_RISING | + V4L2_MBUS_DATA_ACTIVE_HIGH; + + return 0; +} + +static int ml86v7667_g_std(struct v4l2_subdev *sd, v4l2_std_id *std) +{ + struct ml86v7667_priv *priv = to_ml86v7667(sd); + + *std = priv->std; + + return 0; +} + +static int ml86v7667_s_std(struct v4l2_subdev *sd, v4l2_std_id std) +{ + struct ml86v7667_priv *priv = to_ml86v7667(sd); + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); + int ret; + u8 mode; + + /* PAL/NTSC ITU-R BT.601 input mode */ + mode = std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601; + ret = ml86v7667_mask_set(client, MRA_REG, MRA_INPUT_MODE_MASK, mode); + if (ret < 0) + return ret; + + priv->std = std; + + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int ml86v7667_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + int ret; + + ret = i2c_smbus_read_byte_data(client, (u8)reg->reg); + if (ret < 0) + return ret; + + reg->val = ret; + reg->size = sizeof(u8); + + return 0; +} + +static int ml86v7667_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + + return i2c_smbus_write_byte_data(client, (u8)reg->reg, (u8)reg->val); +} +#endif + +static const struct v4l2_ctrl_ops ml86v7667_ctrl_ops = { + .s_ctrl = ml86v7667_s_ctrl, +}; + +static const struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = { + .g_std = ml86v7667_g_std, + .s_std = ml86v7667_s_std, + .querystd = ml86v7667_querystd, + .g_input_status = ml86v7667_g_input_status, +}; + +static const struct v4l2_subdev_pad_ops ml86v7667_subdev_pad_ops = { + .enum_mbus_code = ml86v7667_enum_mbus_code, + .get_fmt = ml86v7667_fill_fmt, + .set_fmt = ml86v7667_fill_fmt, + .get_mbus_config = ml86v7667_get_mbus_config, +}; + +static const struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = { +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = ml86v7667_g_register, + .s_register = ml86v7667_s_register, +#endif +}; + +static const struct v4l2_subdev_ops ml86v7667_subdev_ops = { + .core = &ml86v7667_subdev_core_ops, + .video = &ml86v7667_subdev_video_ops, + .pad = &ml86v7667_subdev_pad_ops, +}; + +static int ml86v7667_init(struct ml86v7667_priv *priv) +{ + struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); + int val; + int ret; + + /* BT.656-4 output mode, register mode */ + ret = ml86v7667_mask_set(client, MRA_REG, + MRA_OUTPUT_MODE_MASK | MRA_REGISTER_MODE, + MRA_ITUR_BT656 | MRA_REGISTER_MODE); + + /* PLL circuit fixed clock, 32MHz */ + ret |= ml86v7667_mask_set(client, PLLR1_REG, PLLR1_FIXED_CLOCK, + PLLR1_FIXED_CLOCK); + + /* ADC2 clamping voltage maximum */ + ret |= ml86v7667_mask_set(client, ADC2_REG, ADC2_CLAMP_VOLTAGE_MASK, + ADC2_CLAMP_VOLTAGE(7)); + + /* enable luminance function */ + ret |= ml86v7667_mask_set(client, SSEPL_REG, SSEPL_LUMINANCE_ONOFF, + SSEPL_LUMINANCE_ONOFF); + + /* enable contrast function */ + ret |= ml86v7667_mask_set(client, CLC_REG, CLC_CONTRAST_ONOFF, 0); + + /* + * PAL/NTSC autodetection is enabled after reset, + * set the autodetected std in manual std mode and + * disable autodetection + */ + val = i2c_smbus_read_byte_data(client, STATUS_REG); + if (val < 0) + return val; + + priv->std = val & STATUS_NTSCPAL ? V4L2_STD_625_50 : V4L2_STD_525_60; + ret |= ml86v7667_mask_set(client, MRC_REG, MRC_AUTOSELECT, 0); + + val = priv->std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601; + ret |= ml86v7667_mask_set(client, MRA_REG, MRA_INPUT_MODE_MASK, val); + + return ret; +} + +static int ml86v7667_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct ml86v7667_priv *priv; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + v4l2_i2c_subdev_init(&priv->sd, client, &ml86v7667_subdev_ops); + + v4l2_ctrl_handler_init(&priv->hdl, 8); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_BRIGHTNESS, -64, 63, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_CONTRAST, -8, 7, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_CHROMA_GAIN, -32, 31, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_RED_BALANCE, -4, 3, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_BLUE_BALANCE, -4, 3, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_SHARPNESS, 0, 1, 1, 0); + v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops, + V4L2_CID_COLOR_KILLER, 0, 1, 1, 0); + priv->sd.ctrl_handler = &priv->hdl; + + ret = priv->hdl.error; + if (ret) + goto cleanup; + + v4l2_ctrl_handler_setup(&priv->hdl); + + ret = ml86v7667_init(priv); + if (ret) + goto cleanup; + + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr, client->adapter->name); + return 0; + +cleanup: + v4l2_ctrl_handler_free(&priv->hdl); + v4l2_device_unregister_subdev(&priv->sd); + v4l_err(client, "failed to probe @ 0x%02x (%s)\n", + client->addr, client->adapter->name); + return ret; +} + +static void ml86v7667_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ml86v7667_priv *priv = to_ml86v7667(sd); + + v4l2_ctrl_handler_free(&priv->hdl); + v4l2_device_unregister_subdev(&priv->sd); +} + +static const struct i2c_device_id ml86v7667_id[] = { + {DRV_NAME, 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, ml86v7667_id); + +static struct i2c_driver ml86v7667_i2c_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = ml86v7667_probe, + .remove = ml86v7667_remove, + .id_table = ml86v7667_id, +}; + +module_i2c_driver(ml86v7667_i2c_driver); + +MODULE_DESCRIPTION("OKI Semiconductor ML86V7667 video decoder driver"); +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_LICENSE("GPL"); |