diff options
Diffstat (limited to 'drivers/media/platform/renesas')
56 files changed, 28314 insertions, 0 deletions
diff --git a/drivers/media/platform/renesas/Kconfig b/drivers/media/platform/renesas/Kconfig new file mode 100644 index 000000000..9fd90672e --- /dev/null +++ b/drivers/media/platform/renesas/Kconfig @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: GPL-2.0-only + +comment "Renesas media platform drivers" + +# V4L drivers + +config VIDEO_RENESAS_CEU + tristate "Renesas Capture Engine Unit (CEU) driver" + depends on V4L_PLATFORM_DRIVERS + depends on VIDEO_DEV + depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST + select VIDEOBUF2_DMA_CONTIG + select V4L2_FWNODE + help + This is a v4l2 driver for the Renesas CEU Interface + +config VIDEO_RCAR_ISP + tristate "R-Car Image Signal Processor (ISP)" + depends on V4L_PLATFORM_DRIVERS + depends on VIDEO_DEV && OF + depends on ARCH_RENESAS || COMPILE_TEST + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select RESET_CONTROLLER + select V4L2_FWNODE + help + Support for Renesas R-Car Image Signal Processor (ISP). + Enable this to support the Renesas R-Car Image Signal + Processor (ISP). + + To compile this driver as a module, choose M here: the + module will be called rcar-isp. + +config VIDEO_SH_VOU + tristate "SuperH VOU video output driver" + depends on V4L_PLATFORM_DRIVERS + depends on VIDEO_DEV && I2C + depends on ARCH_SHMOBILE || COMPILE_TEST + select VIDEOBUF2_DMA_CONTIG + help + Support for the Video Output Unit (VOU) on SuperH SoCs. + +source "drivers/media/platform/renesas/rcar-vin/Kconfig" + +# Mem2mem drivers + +config VIDEO_RENESAS_FCP + tristate "Renesas Frame Compression Processor" + depends on V4L_MEM2MEM_DRIVERS + depends on ARCH_RENESAS || COMPILE_TEST + depends on OF + help + This is a driver for the Renesas Frame Compression Processor (FCP). + The FCP is a companion module of video processing modules in the + Renesas R-Car Gen3 and RZ/G2 SoCs. It handles memory access for + the codec, VSP and FDP modules. + + To compile this driver as a module, choose M here: the module + will be called rcar-fcp. + +config VIDEO_RENESAS_FDP1 + tristate "Renesas Fine Display Processor" + depends on V4L_MEM2MEM_DRIVERS + depends on VIDEO_DEV + depends on ARCH_RENESAS || COMPILE_TEST + depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + This is a V4L2 driver for the Renesas Fine Display Processor + providing colour space conversion, and de-interlacing features. + + To compile this driver as a module, choose M here: the module + will be called rcar_fdp1. + +config VIDEO_RENESAS_JPU + tristate "Renesas JPEG Processing Unit" + depends on V4L_MEM2MEM_DRIVERS + depends on VIDEO_DEV + depends on ARCH_RENESAS || COMPILE_TEST + select VIDEOBUF2_DMA_CONTIG + select V4L2_MEM2MEM_DEV + help + This is a V4L2 driver for the Renesas JPEG Processing Unit. + + To compile this driver as a module, choose M here: the module + will be called rcar_jpu. + +config VIDEO_RENESAS_VSP1 + tristate "Renesas VSP1 Video Processing Engine" + depends on V4L_MEM2MEM_DRIVERS + depends on VIDEO_DEV + depends on ARCH_RENESAS || COMPILE_TEST + depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select VIDEOBUF2_DMA_CONTIG + select VIDEOBUF2_VMALLOC + help + This is a V4L2 driver for the Renesas VSP1 video processing engine. + + To compile this driver as a module, choose M here: the module + will be called vsp1. + +# SDR drivers + +config VIDEO_RCAR_DRIF + tristate "Renesas Digital Radio Interface (DRIF)" + depends on SDR_PLATFORM_DRIVERS + depends on VIDEO_DEV + depends on ARCH_RENESAS || COMPILE_TEST + select VIDEOBUF2_VMALLOC + select V4L2_ASYNC + help + Say Y if you want to enable R-Car Gen3 DRIF support. DRIF is Digital + Radio Interface that interfaces with an RF front end chip. It is a + receiver of digital data which uses DMA to transfer received data to + a configured location for an application to use. + + To compile this driver as a module, choose M here; the module + will be called rcar_drif. diff --git a/drivers/media/platform/renesas/Makefile b/drivers/media/platform/renesas/Makefile new file mode 100644 index 000000000..3ec226ef5 --- /dev/null +++ b/drivers/media/platform/renesas/Makefile @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for the Renesas capture/playback device drivers. +# + +obj-y += rcar-vin/ +obj-y += vsp1/ + +obj-$(CONFIG_VIDEO_RCAR_DRIF) += rcar_drif.o +obj-$(CONFIG_VIDEO_RCAR_ISP) += rcar-isp.o +obj-$(CONFIG_VIDEO_RENESAS_CEU) += renesas-ceu.o +obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o +obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o +obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o +obj-$(CONFIG_VIDEO_SH_VOU) += sh_vou.o diff --git a/drivers/media/platform/renesas/rcar-fcp.c b/drivers/media/platform/renesas/rcar-fcp.c new file mode 100644 index 000000000..eb59a3ba6 --- /dev/null +++ b/drivers/media/platform/renesas/rcar-fcp.c @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * rcar-fcp.c -- R-Car Frame Compression Processor Driver + * + * Copyright (C) 2016 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> + +#include <media/rcar-fcp.h> + +struct rcar_fcp_device { + struct list_head list; + struct device *dev; +}; + +static LIST_HEAD(fcp_devices); +static DEFINE_MUTEX(fcp_lock); + +/* ----------------------------------------------------------------------------- + * Public API + */ + +/** + * rcar_fcp_get - Find and acquire a reference to an FCP instance + * @np: Device node of the FCP instance + * + * Search the list of registered FCP instances for the instance corresponding to + * the given device node. + * + * Return a pointer to the FCP instance, or an ERR_PTR if the instance can't be + * found. + */ +struct rcar_fcp_device *rcar_fcp_get(const struct device_node *np) +{ + struct rcar_fcp_device *fcp; + + mutex_lock(&fcp_lock); + + list_for_each_entry(fcp, &fcp_devices, list) { + if (fcp->dev->of_node != np) + continue; + + get_device(fcp->dev); + goto done; + } + + fcp = ERR_PTR(-EPROBE_DEFER); + +done: + mutex_unlock(&fcp_lock); + return fcp; +} +EXPORT_SYMBOL_GPL(rcar_fcp_get); + +/** + * rcar_fcp_put - Release a reference to an FCP instance + * @fcp: The FCP instance + * + * Release the FCP instance acquired by a call to rcar_fcp_get(). + */ +void rcar_fcp_put(struct rcar_fcp_device *fcp) +{ + if (fcp) + put_device(fcp->dev); +} +EXPORT_SYMBOL_GPL(rcar_fcp_put); + +struct device *rcar_fcp_get_device(struct rcar_fcp_device *fcp) +{ + return fcp->dev; +} +EXPORT_SYMBOL_GPL(rcar_fcp_get_device); + +/** + * rcar_fcp_enable - Enable an FCP + * @fcp: The FCP instance + * + * Before any memory access through an FCP is performed by a module, the FCP + * must be enabled by a call to this function. The enable calls are reference + * counted, each successful call must be followed by one rcar_fcp_disable() + * call when no more memory transfer can occur through the FCP. + * + * Return 0 on success or a negative error code if an error occurs. The enable + * reference count isn't increased when this function returns an error. + */ +int rcar_fcp_enable(struct rcar_fcp_device *fcp) +{ + if (!fcp) + return 0; + + return pm_runtime_resume_and_get(fcp->dev); +} +EXPORT_SYMBOL_GPL(rcar_fcp_enable); + +/** + * rcar_fcp_disable - Disable an FCP + * @fcp: The FCP instance + * + * This function is the counterpart of rcar_fcp_enable(). As enable calls are + * reference counted a disable call may not disable the FCP synchronously. + */ +void rcar_fcp_disable(struct rcar_fcp_device *fcp) +{ + if (fcp) + pm_runtime_put(fcp->dev); +} +EXPORT_SYMBOL_GPL(rcar_fcp_disable); + +/* ----------------------------------------------------------------------------- + * Platform Driver + */ + +static int rcar_fcp_probe(struct platform_device *pdev) +{ + struct rcar_fcp_device *fcp; + + fcp = devm_kzalloc(&pdev->dev, sizeof(*fcp), GFP_KERNEL); + if (fcp == NULL) + return -ENOMEM; + + fcp->dev = &pdev->dev; + + dma_set_max_seg_size(fcp->dev, UINT_MAX); + + pm_runtime_enable(&pdev->dev); + + mutex_lock(&fcp_lock); + list_add_tail(&fcp->list, &fcp_devices); + mutex_unlock(&fcp_lock); + + platform_set_drvdata(pdev, fcp); + + return 0; +} + +static int rcar_fcp_remove(struct platform_device *pdev) +{ + struct rcar_fcp_device *fcp = platform_get_drvdata(pdev); + + mutex_lock(&fcp_lock); + list_del(&fcp->list); + mutex_unlock(&fcp_lock); + + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id rcar_fcp_of_match[] = { + { .compatible = "renesas,fcpf" }, + { .compatible = "renesas,fcpv" }, + { }, +}; +MODULE_DEVICE_TABLE(of, rcar_fcp_of_match); + +static struct platform_driver rcar_fcp_platform_driver = { + .probe = rcar_fcp_probe, + .remove = rcar_fcp_remove, + .driver = { + .name = "rcar-fcp", + .of_match_table = rcar_fcp_of_match, + .suppress_bind_attrs = true, + }, +}; + +module_platform_driver(rcar_fcp_platform_driver); + +MODULE_ALIAS("rcar-fcp"); +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_DESCRIPTION("Renesas FCP Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/renesas/rcar-isp.c b/drivers/media/platform/renesas/rcar-isp.c new file mode 100644 index 000000000..10b3474f9 --- /dev/null +++ b/drivers/media/platform/renesas/rcar-isp.c @@ -0,0 +1,535 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Renesas Electronics Corp. + * + * Driver for Renesas R-Car ISP Channel Selector + * + * The ISP hardware is capable of more than just channel selection, features + * such as demosaicing, white balance control and color space conversion are + * also possible. These more advanced features are not supported by the driver + * due to lack of documentation. + */ + +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> + +#include <media/mipi-csi2.h> +#include <media/v4l2-subdev.h> + +#define ISPINPUTSEL0_REG 0x0008 +#define ISPINPUTSEL0_SEL_CSI0 BIT(31) + +#define ISPSTART_REG 0x0014 +#define ISPSTART_START 0xffff +#define ISPSTART_STOP 0x0000 + +#define ISPPROCMODE_DT_REG(n) (0x1100 + (0x4 * (n))) +#define ISPPROCMODE_DT_PROC_MODE_VC3(pm) (((pm) & 0x3f) << 24) +#define ISPPROCMODE_DT_PROC_MODE_VC2(pm) (((pm) & 0x3f) << 16) +#define ISPPROCMODE_DT_PROC_MODE_VC1(pm) (((pm) & 0x3f) << 8) +#define ISPPROCMODE_DT_PROC_MODE_VC0(pm) ((pm) & 0x3f) + +#define ISPCS_FILTER_ID_CH_REG(n) (0x3000 + (0x0100 * (n))) + +#define ISPCS_DT_CODE03_CH_REG(n) (0x3008 + (0x100 * (n))) +#define ISPCS_DT_CODE03_EN3 BIT(31) +#define ISPCS_DT_CODE03_DT3(dt) (((dt) & 0x3f) << 24) +#define ISPCS_DT_CODE03_EN2 BIT(23) +#define ISPCS_DT_CODE03_DT2(dt) (((dt) & 0x3f) << 16) +#define ISPCS_DT_CODE03_EN1 BIT(15) +#define ISPCS_DT_CODE03_DT1(dt) (((dt) & 0x3f) << 8) +#define ISPCS_DT_CODE03_EN0 BIT(7) +#define ISPCS_DT_CODE03_DT0(dt) ((dt) & 0x3f) + +struct rcar_isp_format { + u32 code; + unsigned int datatype; + unsigned int procmode; +}; + +static const struct rcar_isp_format rcar_isp_formats[] = { + { + .code = MEDIA_BUS_FMT_RGB888_1X24, + .datatype = MIPI_CSI2_DT_RGB888, + .procmode = 0x15 + }, { + .code = MEDIA_BUS_FMT_Y10_1X10, + .datatype = MIPI_CSI2_DT_RAW10, + .procmode = 0x10, + }, { + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .datatype = MIPI_CSI2_DT_YUV422_8B, + .procmode = 0x0c, + }, { + .code = MEDIA_BUS_FMT_YUYV8_1X16, + .datatype = MIPI_CSI2_DT_YUV422_8B, + .procmode = 0x0c, + }, { + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .datatype = MIPI_CSI2_DT_YUV422_8B, + .procmode = 0x0c, + }, { + .code = MEDIA_BUS_FMT_YUYV10_2X10, + .datatype = MIPI_CSI2_DT_YUV422_8B, + .procmode = 0x0c, + }, +}; + +static const struct rcar_isp_format *risp_code_to_fmt(unsigned int code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(rcar_isp_formats); i++) { + if (rcar_isp_formats[i].code == code) + return &rcar_isp_formats[i]; + } + + return NULL; +} + +enum rcar_isp_input { + RISP_CSI_INPUT0, + RISP_CSI_INPUT1, +}; + +enum rcar_isp_pads { + RCAR_ISP_SINK, + RCAR_ISP_PORT0, + RCAR_ISP_PORT1, + RCAR_ISP_PORT2, + RCAR_ISP_PORT3, + RCAR_ISP_PORT4, + RCAR_ISP_PORT5, + RCAR_ISP_PORT6, + RCAR_ISP_PORT7, + RCAR_ISP_NUM_PADS, +}; + +struct rcar_isp { + struct device *dev; + void __iomem *base; + struct reset_control *rstc; + + enum rcar_isp_input csi_input; + + struct v4l2_subdev subdev; + struct media_pad pads[RCAR_ISP_NUM_PADS]; + + struct v4l2_async_notifier notifier; + struct v4l2_subdev *remote; + + struct mutex lock; /* Protects mf and stream_count. */ + struct v4l2_mbus_framefmt mf; + int stream_count; +}; + +static inline struct rcar_isp *sd_to_isp(struct v4l2_subdev *sd) +{ + return container_of(sd, struct rcar_isp, subdev); +} + +static inline struct rcar_isp *notifier_to_isp(struct v4l2_async_notifier *n) +{ + return container_of(n, struct rcar_isp, notifier); +} + +static void risp_write(struct rcar_isp *isp, u32 offset, u32 value) +{ + iowrite32(value, isp->base + offset); +} + +static u32 risp_read(struct rcar_isp *isp, u32 offset) +{ + return ioread32(isp->base + offset); +} + +static int risp_power_on(struct rcar_isp *isp) +{ + int ret; + + ret = pm_runtime_resume_and_get(isp->dev); + if (ret < 0) + return ret; + + ret = reset_control_deassert(isp->rstc); + if (ret < 0) { + pm_runtime_put(isp->dev); + return ret; + } + + return 0; +} + +static void risp_power_off(struct rcar_isp *isp) +{ + reset_control_assert(isp->rstc); + pm_runtime_put(isp->dev); +} + +static int risp_start(struct rcar_isp *isp) +{ + const struct rcar_isp_format *format; + unsigned int vc; + u32 sel_csi = 0; + int ret; + + format = risp_code_to_fmt(isp->mf.code); + if (!format) { + dev_err(isp->dev, "Unsupported bus format\n"); + return -EINVAL; + } + + ret = risp_power_on(isp); + if (ret) { + dev_err(isp->dev, "Failed to power on ISP\n"); + return ret; + } + + /* Select CSI-2 input source. */ + if (isp->csi_input == RISP_CSI_INPUT1) + sel_csi = ISPINPUTSEL0_SEL_CSI0; + + risp_write(isp, ISPINPUTSEL0_REG, + risp_read(isp, ISPINPUTSEL0_REG) | sel_csi); + + /* Configure Channel Selector. */ + for (vc = 0; vc < 4; vc++) { + u8 ch = vc + 4; + u8 dt = format->datatype; + + risp_write(isp, ISPCS_FILTER_ID_CH_REG(ch), BIT(vc)); + risp_write(isp, ISPCS_DT_CODE03_CH_REG(ch), + ISPCS_DT_CODE03_EN3 | ISPCS_DT_CODE03_DT3(dt) | + ISPCS_DT_CODE03_EN2 | ISPCS_DT_CODE03_DT2(dt) | + ISPCS_DT_CODE03_EN1 | ISPCS_DT_CODE03_DT1(dt) | + ISPCS_DT_CODE03_EN0 | ISPCS_DT_CODE03_DT0(dt)); + } + + /* Setup processing method. */ + risp_write(isp, ISPPROCMODE_DT_REG(format->datatype), + ISPPROCMODE_DT_PROC_MODE_VC3(format->procmode) | + ISPPROCMODE_DT_PROC_MODE_VC2(format->procmode) | + ISPPROCMODE_DT_PROC_MODE_VC1(format->procmode) | + ISPPROCMODE_DT_PROC_MODE_VC0(format->procmode)); + + /* Start ISP. */ + risp_write(isp, ISPSTART_REG, ISPSTART_START); + + ret = v4l2_subdev_call(isp->remote, video, s_stream, 1); + if (ret) + risp_power_off(isp); + + return ret; +} + +static void risp_stop(struct rcar_isp *isp) +{ + v4l2_subdev_call(isp->remote, video, s_stream, 0); + + /* Stop ISP. */ + risp_write(isp, ISPSTART_REG, ISPSTART_STOP); + + risp_power_off(isp); +} + +static int risp_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct rcar_isp *isp = sd_to_isp(sd); + int ret = 0; + + mutex_lock(&isp->lock); + + if (!isp->remote) { + ret = -ENODEV; + goto out; + } + + if (enable && isp->stream_count == 0) { + ret = risp_start(isp); + if (ret) + goto out; + } else if (!enable && isp->stream_count == 1) { + risp_stop(isp); + } + + isp->stream_count += enable ? 1 : -1; +out: + mutex_unlock(&isp->lock); + + return ret; +} + +static const struct v4l2_subdev_video_ops risp_video_ops = { + .s_stream = risp_s_stream, +}; + +static int risp_set_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct rcar_isp *isp = sd_to_isp(sd); + struct v4l2_mbus_framefmt *framefmt; + + mutex_lock(&isp->lock); + + if (!risp_code_to_fmt(format->format.code)) + format->format.code = rcar_isp_formats[0].code; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + isp->mf = format->format; + } else { + framefmt = v4l2_subdev_get_try_format(sd, sd_state, 0); + *framefmt = format->format; + } + + mutex_unlock(&isp->lock); + + return 0; +} + +static int risp_get_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct rcar_isp *isp = sd_to_isp(sd); + + mutex_lock(&isp->lock); + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) + format->format = isp->mf; + else + format->format = *v4l2_subdev_get_try_format(sd, sd_state, 0); + + mutex_unlock(&isp->lock); + + return 0; +} + +static const struct v4l2_subdev_pad_ops risp_pad_ops = { + .set_fmt = risp_set_pad_format, + .get_fmt = risp_get_pad_format, + .link_validate = v4l2_subdev_link_validate_default, +}; + +static const struct v4l2_subdev_ops rcar_isp_subdev_ops = { + .video = &risp_video_ops, + .pad = &risp_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * Async handling and registration of subdevices and links + */ + +static int risp_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct rcar_isp *isp = notifier_to_isp(notifier); + int pad; + + pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode, + MEDIA_PAD_FL_SOURCE); + if (pad < 0) { + dev_err(isp->dev, "Failed to find pad for %s\n", subdev->name); + return pad; + } + + isp->remote = subdev; + + dev_dbg(isp->dev, "Bound %s pad: %d\n", subdev->name, pad); + + return media_create_pad_link(&subdev->entity, pad, + &isp->subdev.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); +} + +static void risp_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct rcar_isp *isp = notifier_to_isp(notifier); + + isp->remote = NULL; + + dev_dbg(isp->dev, "Unbind %s\n", subdev->name); +} + +static const struct v4l2_async_notifier_operations risp_notify_ops = { + .bound = risp_notify_bound, + .unbind = risp_notify_unbind, +}; + +static int risp_parse_dt(struct rcar_isp *isp) +{ + struct v4l2_async_subdev *asd; + struct fwnode_handle *fwnode; + struct fwnode_handle *ep; + unsigned int id; + int ret; + + for (id = 0; id < 2; id++) { + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(isp->dev), + 0, id, 0); + if (ep) + break; + } + + if (!ep) { + dev_err(isp->dev, "Not connected to subdevice\n"); + return -EINVAL; + } + + if (id == 1) + isp->csi_input = RISP_CSI_INPUT1; + + fwnode = fwnode_graph_get_remote_endpoint(ep); + fwnode_handle_put(ep); + + dev_dbg(isp->dev, "Found '%pOF'\n", to_of_node(fwnode)); + + v4l2_async_nf_init(&isp->notifier); + isp->notifier.ops = &risp_notify_ops; + + asd = v4l2_async_nf_add_fwnode(&isp->notifier, fwnode, + struct v4l2_async_subdev); + fwnode_handle_put(fwnode); + if (IS_ERR(asd)) + return PTR_ERR(asd); + + ret = v4l2_async_subdev_nf_register(&isp->subdev, &isp->notifier); + if (ret) + v4l2_async_nf_cleanup(&isp->notifier); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Platform Device Driver + */ + +static const struct media_entity_operations risp_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +static int risp_probe_resources(struct rcar_isp *isp, + struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + isp->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(isp->base)) + return PTR_ERR(isp->base); + + isp->rstc = devm_reset_control_get(&pdev->dev, NULL); + + return PTR_ERR_OR_ZERO(isp->rstc); +} + +static const struct of_device_id risp_of_id_table[] = { + { .compatible = "renesas,r8a779a0-isp" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, risp_of_id_table); + +static int risp_probe(struct platform_device *pdev) +{ + struct rcar_isp *isp; + unsigned int i; + int ret; + + isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL); + if (!isp) + return -ENOMEM; + + isp->dev = &pdev->dev; + + mutex_init(&isp->lock); + + ret = risp_probe_resources(isp, pdev); + if (ret) { + dev_err(isp->dev, "Failed to get resources\n"); + goto error_mutex; + } + + platform_set_drvdata(pdev, isp); + + pm_runtime_enable(&pdev->dev); + + ret = risp_parse_dt(isp); + if (ret) + goto error_pm; + + isp->subdev.owner = THIS_MODULE; + isp->subdev.dev = &pdev->dev; + v4l2_subdev_init(&isp->subdev, &rcar_isp_subdev_ops); + v4l2_set_subdevdata(&isp->subdev, &pdev->dev); + snprintf(isp->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s %s", + KBUILD_MODNAME, dev_name(&pdev->dev)); + isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE; + + isp->subdev.entity.function = MEDIA_ENT_F_VID_MUX; + isp->subdev.entity.ops = &risp_entity_ops; + + isp->pads[RCAR_ISP_SINK].flags = MEDIA_PAD_FL_SINK; + for (i = RCAR_ISP_PORT0; i < RCAR_ISP_NUM_PADS; i++) + isp->pads[i].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&isp->subdev.entity, RCAR_ISP_NUM_PADS, + isp->pads); + if (ret) + goto error_notifier; + + ret = v4l2_async_register_subdev(&isp->subdev); + if (ret < 0) + goto error_notifier; + + dev_info(isp->dev, "Using CSI-2 input: %u\n", isp->csi_input); + + return 0; +error_notifier: + v4l2_async_nf_unregister(&isp->notifier); + v4l2_async_nf_cleanup(&isp->notifier); +error_pm: + pm_runtime_disable(&pdev->dev); +error_mutex: + mutex_destroy(&isp->lock); + + return ret; +} + +static int risp_remove(struct platform_device *pdev) +{ + struct rcar_isp *isp = platform_get_drvdata(pdev); + + v4l2_async_nf_unregister(&isp->notifier); + v4l2_async_nf_cleanup(&isp->notifier); + + v4l2_async_unregister_subdev(&isp->subdev); + + pm_runtime_disable(&pdev->dev); + + mutex_destroy(&isp->lock); + + return 0; +} + +static struct platform_driver rcar_isp_driver = { + .driver = { + .name = "rcar-isp", + .of_match_table = risp_of_id_table, + }, + .probe = risp_probe, + .remove = risp_remove, +}; + +module_platform_driver(rcar_isp_driver); + +MODULE_AUTHOR("Niklas Söderlund <niklas.soderlund@ragnatech.se>"); +MODULE_DESCRIPTION("Renesas R-Car ISP Channel Selector driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/renesas/rcar-vin/Kconfig b/drivers/media/platform/renesas/rcar-vin/Kconfig new file mode 100644 index 000000000..de55fe63d --- /dev/null +++ b/drivers/media/platform/renesas/rcar-vin/Kconfig @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0 +config VIDEO_RCAR_CSI2 + tristate "R-Car MIPI CSI-2 Receiver" + depends on V4L_PLATFORM_DRIVERS + depends on VIDEO_DEV && OF + depends on ARCH_RENESAS || COMPILE_TEST + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select RESET_CONTROLLER + select V4L2_FWNODE + help + Support for Renesas R-Car MIPI CSI-2 receiver. + Supports R-Car Gen3 and RZ/G2 SoCs. + + To compile this driver as a module, choose M here: the + module will be called rcar-csi2. + +config VIDEO_RCAR_VIN + tristate "R-Car Video Input (VIN) Driver" + depends on V4L_PLATFORM_DRIVERS + depends on VIDEO_DEV && OF + depends on ARCH_RENESAS || COMPILE_TEST + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select VIDEOBUF2_DMA_CONTIG + select V4L2_FWNODE + help + Support for Renesas R-Car Video Input (VIN) driver. + Supports R-Car Gen{2,3} and RZ/G{1,2} SoCs. + + To compile this driver as a module, choose M here: the + module will be called rcar-vin. diff --git a/drivers/media/platform/renesas/rcar-vin/Makefile b/drivers/media/platform/renesas/rcar-vin/Makefile new file mode 100644 index 000000000..00d809f5d --- /dev/null +++ b/drivers/media/platform/renesas/rcar-vin/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +rcar-vin-objs = rcar-core.o rcar-dma.o rcar-v4l2.o + +obj-$(CONFIG_VIDEO_RCAR_CSI2) += rcar-csi2.o +obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin.o diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-core.c b/drivers/media/platform/renesas/rcar-vin/rcar-core.c new file mode 100644 index 000000000..2f7daa853 --- /dev/null +++ b/drivers/media/platform/renesas/rcar-vin/rcar-core.c @@ -0,0 +1,1466 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Renesas R-Car VIN + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2011-2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com> + * Copyright (C) 2008 Magnus Damm + * + * Based on the soc-camera rcar_vin driver + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> + +#include <media/v4l2-async.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-mc.h> + +#include "rcar-vin.h" + +/* + * The companion CSI-2 receiver driver (rcar-csi2) is known + * and we know it has one source pad (pad 0) and four sink + * pads (pad 1-4). So to translate a pad on the remote + * CSI-2 receiver to/from the VIN internal channel number simply + * subtract/add one from the pad/channel number. + */ +#define rvin_group_csi_pad_to_channel(pad) ((pad) - 1) +#define rvin_group_csi_channel_to_pad(channel) ((channel) + 1) + +/* + * Not all VINs are created equal, master VINs control the + * routing for other VIN's. We can figure out which VIN is + * master by looking at a VINs id. + */ +#define rvin_group_id_to_master(vin) ((vin) < 4 ? 0 : 4) + +#define v4l2_dev_to_vin(d) container_of(d, struct rvin_dev, v4l2_dev) + +/* ----------------------------------------------------------------------------- + * Gen3 Group Allocator + */ + +/* FIXME: This should if we find a system that supports more + * than one group for the whole system be replaced with a linked + * list of groups. And eventually all of this should be replaced + * with a global device allocator API. + * + * But for now this works as on all supported systems there will + * be only one group for all instances. + */ + +static DEFINE_MUTEX(rvin_group_lock); +static struct rvin_group *rvin_group_data; + +static void rvin_group_cleanup(struct rvin_group *group) +{ + media_device_cleanup(&group->mdev); + mutex_destroy(&group->lock); +} + +static int rvin_group_init(struct rvin_group *group, struct rvin_dev *vin, + int (*link_setup)(struct rvin_dev *), + const struct media_device_ops *ops) +{ + struct media_device *mdev = &group->mdev; + const struct of_device_id *match; + struct device_node *np; + + mutex_init(&group->lock); + + /* Count number of VINs in the system */ + group->count = 0; + for_each_matching_node(np, vin->dev->driver->of_match_table) + if (of_device_is_available(np)) + group->count++; + + vin_dbg(vin, "found %u enabled VIN's in DT", group->count); + + group->link_setup = link_setup; + + mdev->dev = vin->dev; + mdev->ops = ops; + + match = of_match_node(vin->dev->driver->of_match_table, + vin->dev->of_node); + + strscpy(mdev->driver_name, KBUILD_MODNAME, sizeof(mdev->driver_name)); + strscpy(mdev->model, match->compatible, sizeof(mdev->model)); + + media_device_init(mdev); + + return 0; +} + +static void rvin_group_release(struct kref *kref) +{ + struct rvin_group *group = + container_of(kref, struct rvin_group, refcount); + + mutex_lock(&rvin_group_lock); + + rvin_group_data = NULL; + + rvin_group_cleanup(group); + + kfree(group); + + mutex_unlock(&rvin_group_lock); +} + +static int rvin_group_get(struct rvin_dev *vin, + int (*link_setup)(struct rvin_dev *), + const struct media_device_ops *ops) +{ + struct rvin_group *group; + u32 id; + int ret; + + /* Make sure VIN id is present and sane */ + ret = of_property_read_u32(vin->dev->of_node, "renesas,id", &id); + if (ret) { + vin_err(vin, "%pOF: No renesas,id property found\n", + vin->dev->of_node); + return -EINVAL; + } + + if (id >= RCAR_VIN_NUM) { + vin_err(vin, "%pOF: Invalid renesas,id '%u'\n", + vin->dev->of_node, id); + return -EINVAL; + } + + /* Join or create a VIN group */ + mutex_lock(&rvin_group_lock); + if (rvin_group_data) { + group = rvin_group_data; + kref_get(&group->refcount); + } else { + group = kzalloc(sizeof(*group), GFP_KERNEL); + if (!group) { + ret = -ENOMEM; + goto err_group; + } + + ret = rvin_group_init(group, vin, link_setup, ops); + if (ret) { + kfree(group); + vin_err(vin, "Failed to initialize group\n"); + goto err_group; + } + + kref_init(&group->refcount); + + rvin_group_data = group; + } + mutex_unlock(&rvin_group_lock); + + /* Add VIN to group */ + mutex_lock(&group->lock); + + if (group->vin[id]) { + vin_err(vin, "Duplicate renesas,id property value %u\n", id); + mutex_unlock(&group->lock); + kref_put(&group->refcount, rvin_group_release); + return -EINVAL; + } + + group->vin[id] = vin; + + vin->id = id; + vin->group = group; + vin->v4l2_dev.mdev = &group->mdev; + + mutex_unlock(&group->lock); + + return 0; +err_group: + mutex_unlock(&rvin_group_lock); + return ret; +} + +static void rvin_group_put(struct rvin_dev *vin) +{ + struct rvin_group *group = vin->group; + + mutex_lock(&group->lock); + + vin->group = NULL; + vin->v4l2_dev.mdev = NULL; + + if (WARN_ON(group->vin[vin->id] != vin)) + goto out; + + group->vin[vin->id] = NULL; +out: + mutex_unlock(&group->lock); + + kref_put(&group->refcount, rvin_group_release); +} + +/* group lock should be held when calling this function. */ +static int rvin_group_entity_to_remote_id(struct rvin_group *group, + struct media_entity *entity) +{ + struct v4l2_subdev *sd; + unsigned int i; + + sd = media_entity_to_v4l2_subdev(entity); + + for (i = 0; i < RVIN_REMOTES_MAX; i++) + if (group->remotes[i].subdev == sd) + return i; + + return -ENODEV; +} + +static int rvin_group_notify_complete(struct v4l2_async_notifier *notifier) +{ + struct rvin_dev *vin = v4l2_dev_to_vin(notifier->v4l2_dev); + unsigned int i; + int ret; + + ret = media_device_register(&vin->group->mdev); + if (ret) + return ret; + + ret = v4l2_device_register_subdev_nodes(&vin->v4l2_dev); + if (ret) { + vin_err(vin, "Failed to register subdev nodes\n"); + return ret; + } + + /* Register all video nodes for the group. */ + for (i = 0; i < RCAR_VIN_NUM; i++) { + if (vin->group->vin[i] && + !video_is_registered(&vin->group->vin[i]->vdev)) { + ret = rvin_v4l2_register(vin->group->vin[i]); + if (ret) + return ret; + } + } + + return vin->group->link_setup(vin); +} + +static void rvin_group_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct rvin_dev *vin = v4l2_dev_to_vin(notifier->v4l2_dev); + unsigned int i; + + for (i = 0; i < RCAR_VIN_NUM; i++) + if (vin->group->vin[i]) + rvin_v4l2_unregister(vin->group->vin[i]); + + mutex_lock(&vin->group->lock); + + for (i = 0; i < RVIN_CSI_MAX; i++) { + if (vin->group->remotes[i].asd != asd) + continue; + vin->group->remotes[i].subdev = NULL; + vin_dbg(vin, "Unbind %s from slot %u\n", subdev->name, i); + break; + } + + mutex_unlock(&vin->group->lock); + + media_device_unregister(&vin->group->mdev); +} + +static int rvin_group_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct rvin_dev *vin = v4l2_dev_to_vin(notifier->v4l2_dev); + unsigned int i; + + mutex_lock(&vin->group->lock); + + for (i = 0; i < RVIN_CSI_MAX; i++) { + if (vin->group->remotes[i].asd != asd) + continue; + vin->group->remotes[i].subdev = subdev; + vin_dbg(vin, "Bound %s to slot %u\n", subdev->name, i); + break; + } + + mutex_unlock(&vin->group->lock); + + return 0; +} + +static const struct v4l2_async_notifier_operations rvin_group_notify_ops = { + .bound = rvin_group_notify_bound, + .unbind = rvin_group_notify_unbind, + .complete = rvin_group_notify_complete, +}; + +static int rvin_group_parse_of(struct rvin_dev *vin, unsigned int port, + unsigned int id) +{ + struct fwnode_handle *ep, *fwnode; + struct v4l2_fwnode_endpoint vep = { + .bus_type = V4L2_MBUS_CSI2_DPHY, + }; + struct v4l2_async_subdev *asd; + int ret; + + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(vin->dev), port, id, 0); + if (!ep) + return 0; + + fwnode = fwnode_graph_get_remote_endpoint(ep); + ret = v4l2_fwnode_endpoint_parse(ep, &vep); + fwnode_handle_put(ep); + if (ret) { + vin_err(vin, "Failed to parse %pOF\n", to_of_node(fwnode)); + ret = -EINVAL; + goto out; + } + + asd = v4l2_async_nf_add_fwnode(&vin->group->notifier, fwnode, + struct v4l2_async_subdev); + if (IS_ERR(asd)) { + ret = PTR_ERR(asd); + goto out; + } + + vin->group->remotes[vep.base.id].asd = asd; + + vin_dbg(vin, "Add group OF device %pOF to slot %u\n", + to_of_node(fwnode), vep.base.id); +out: + fwnode_handle_put(fwnode); + + return ret; +} + +static void rvin_group_notifier_cleanup(struct rvin_dev *vin) +{ + if (&vin->v4l2_dev == vin->group->notifier.v4l2_dev) { + v4l2_async_nf_unregister(&vin->group->notifier); + v4l2_async_nf_cleanup(&vin->group->notifier); + } +} + +static int rvin_group_notifier_init(struct rvin_dev *vin, unsigned int port, + unsigned int max_id) +{ + unsigned int count = 0, vin_mask = 0; + unsigned int i, id; + int ret; + + mutex_lock(&vin->group->lock); + + /* If not all VIN's are registered don't register the notifier. */ + for (i = 0; i < RCAR_VIN_NUM; i++) { + if (vin->group->vin[i]) { + count++; + vin_mask |= BIT(i); + } + } + + if (vin->group->count != count) { + mutex_unlock(&vin->group->lock); + return 0; + } + + mutex_unlock(&vin->group->lock); + + v4l2_async_nf_init(&vin->group->notifier); + + /* + * Some subdevices may overlap but the parser function can handle it and + * each subdevice will only be registered once with the group notifier. + */ + for (i = 0; i < RCAR_VIN_NUM; i++) { + if (!(vin_mask & BIT(i))) + continue; + + for (id = 0; id < max_id; id++) { + if (vin->group->remotes[id].asd) + continue; + + ret = rvin_group_parse_of(vin->group->vin[i], port, id); + if (ret) + return ret; + } + } + + if (list_empty(&vin->group->notifier.asd_list)) + return 0; + + vin->group->notifier.ops = &rvin_group_notify_ops; + ret = v4l2_async_nf_register(&vin->v4l2_dev, &vin->group->notifier); + if (ret < 0) { + vin_err(vin, "Notifier registration failed\n"); + v4l2_async_nf_cleanup(&vin->group->notifier); + return ret; + } + + return 0; +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +static int rvin_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct rvin_dev *vin = + container_of(ctrl->handler, struct rvin_dev, ctrl_handler); + + switch (ctrl->id) { + case V4L2_CID_ALPHA_COMPONENT: + rvin_set_alpha(vin, ctrl->val); + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops rvin_ctrl_ops = { + .s_ctrl = rvin_s_ctrl, +}; + +static void rvin_free_controls(struct rvin_dev *vin) +{ + v4l2_ctrl_handler_free(&vin->ctrl_handler); + vin->vdev.ctrl_handler = NULL; +} + +static int rvin_create_controls(struct rvin_dev *vin, struct v4l2_subdev *subdev) +{ + int ret; + + ret = v4l2_ctrl_handler_init(&vin->ctrl_handler, 16); + if (ret < 0) + return ret; + + /* The VIN directly deals with alpha component. */ + v4l2_ctrl_new_std(&vin->ctrl_handler, &rvin_ctrl_ops, + V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 255); + + if (vin->ctrl_handler.error) { + ret = vin->ctrl_handler.error; + rvin_free_controls(vin); + return ret; + } + + /* For the non-MC mode add controls from the subdevice. */ + if (subdev) { + ret = v4l2_ctrl_add_handler(&vin->ctrl_handler, + subdev->ctrl_handler, NULL, true); + if (ret < 0) { + rvin_free_controls(vin); + return ret; + } + } + + vin->vdev.ctrl_handler = &vin->ctrl_handler; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * Async notifier + */ + +static int rvin_find_pad(struct v4l2_subdev *sd, int direction) +{ + unsigned int pad; + + if (sd->entity.num_pads <= 1) + return 0; + + for (pad = 0; pad < sd->entity.num_pads; pad++) + if (sd->entity.pads[pad].flags & direction) + return pad; + + return -EINVAL; +} + +/* ----------------------------------------------------------------------------- + * Parallel async notifier + */ + +/* The vin lock should be held when calling the subdevice attach and detach */ +static int rvin_parallel_subdevice_attach(struct rvin_dev *vin, + struct v4l2_subdev *subdev) +{ + struct v4l2_subdev_mbus_code_enum code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + int ret; + + /* Find source and sink pad of remote subdevice */ + ret = rvin_find_pad(subdev, MEDIA_PAD_FL_SOURCE); + if (ret < 0) + return ret; + vin->parallel.source_pad = ret; + + ret = rvin_find_pad(subdev, MEDIA_PAD_FL_SINK); + vin->parallel.sink_pad = ret < 0 ? 0 : ret; + + if (vin->info->use_mc) { + vin->parallel.subdev = subdev; + return 0; + } + + /* Find compatible subdevices mbus format */ + vin->mbus_code = 0; + code.index = 0; + code.pad = vin->parallel.source_pad; + while (!vin->mbus_code && + !v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) { + code.index++; + switch (code.code) { + case MEDIA_BUS_FMT_YUYV8_1X16: + case MEDIA_BUS_FMT_UYVY8_1X16: + case MEDIA_BUS_FMT_UYVY8_2X8: + case MEDIA_BUS_FMT_UYVY10_2X10: + case MEDIA_BUS_FMT_RGB888_1X24: + vin->mbus_code = code.code; + vin_dbg(vin, "Found media bus format for %s: %d\n", + subdev->name, vin->mbus_code); + break; + default: + break; + } + } + + if (!vin->mbus_code) { + vin_err(vin, "Unsupported media bus format for %s\n", + subdev->name); + return -EINVAL; + } + + /* Read tvnorms */ + ret = v4l2_subdev_call(subdev, video, g_tvnorms, &vin->vdev.tvnorms); + if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) + return ret; + + /* Read standard */ + vin->std = V4L2_STD_UNKNOWN; + ret = v4l2_subdev_call(subdev, video, g_std, &vin->std); + if (ret < 0 && ret != -ENOIOCTLCMD) + return ret; + + /* Add the controls */ + ret = rvin_create_controls(vin, subdev); + if (ret < 0) + return ret; + + vin->parallel.subdev = subdev; + + return 0; +} + +static void rvin_parallel_subdevice_detach(struct rvin_dev *vin) +{ + rvin_v4l2_unregister(vin); + vin->parallel.subdev = NULL; + + if (!vin->info->use_mc) + rvin_free_controls(vin); +} + +static int rvin_parallel_notify_complete(struct v4l2_async_notifier *notifier) +{ + struct rvin_dev *vin = v4l2_dev_to_vin(notifier->v4l2_dev); + struct media_entity *source; + struct media_entity *sink; + int ret; + + ret = v4l2_device_register_subdev_nodes(&vin->v4l2_dev); + if (ret < 0) { + vin_err(vin, "Failed to register subdev nodes\n"); + return ret; + } + + if (!video_is_registered(&vin->vdev)) { + ret = rvin_v4l2_register(vin); + if (ret < 0) + return ret; + } + + if (!vin->info->use_mc) + return 0; + + /* If we're running with media-controller, link the subdevs. */ + source = &vin->parallel.subdev->entity; + sink = &vin->vdev.entity; + + ret = media_create_pad_link(source, vin->parallel.source_pad, + sink, vin->parallel.sink_pad, 0); + if (ret) + vin_err(vin, "Error adding link from %s to %s: %d\n", + source->name, sink->name, ret); + + return ret; +} + +static void rvin_parallel_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct rvin_dev *vin = v4l2_dev_to_vin(notifier->v4l2_dev); + + vin_dbg(vin, "unbind parallel subdev %s\n", subdev->name); + + mutex_lock(&vin->lock); + rvin_parallel_subdevice_detach(vin); + mutex_unlock(&vin->lock); +} + +static int rvin_parallel_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct rvin_dev *vin = v4l2_dev_to_vin(notifier->v4l2_dev); + int ret; + + mutex_lock(&vin->lock); + ret = rvin_parallel_subdevice_attach(vin, subdev); + mutex_unlock(&vin->lock); + if (ret) + return ret; + + v4l2_set_subdev_hostdata(subdev, vin); + + vin_dbg(vin, "bound subdev %s source pad: %u sink pad: %u\n", + subdev->name, vin->parallel.source_pad, + vin->parallel.sink_pad); + + return 0; +} + +static const struct v4l2_async_notifier_operations rvin_parallel_notify_ops = { + .bound = rvin_parallel_notify_bound, + .unbind = rvin_parallel_notify_unbind, + .complete = rvin_parallel_notify_complete, +}; + +static int rvin_parallel_parse_of(struct rvin_dev *vin) +{ + struct fwnode_handle *ep, *fwnode; + struct v4l2_fwnode_endpoint vep = { + .bus_type = V4L2_MBUS_UNKNOWN, + }; + struct v4l2_async_subdev *asd; + int ret; + + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(vin->dev), 0, 0, 0); + if (!ep) + return 0; + + fwnode = fwnode_graph_get_remote_endpoint(ep); + ret = v4l2_fwnode_endpoint_parse(ep, &vep); + fwnode_handle_put(ep); + if (ret) { + vin_err(vin, "Failed to parse %pOF\n", to_of_node(fwnode)); + ret = -EINVAL; + goto out; + } + + switch (vep.bus_type) { + case V4L2_MBUS_PARALLEL: + case V4L2_MBUS_BT656: + vin_dbg(vin, "Found %s media bus\n", + vep.bus_type == V4L2_MBUS_PARALLEL ? + "PARALLEL" : "BT656"); + vin->parallel.mbus_type = vep.bus_type; + vin->parallel.bus = vep.bus.parallel; + break; + default: + vin_err(vin, "Unknown media bus type\n"); + ret = -EINVAL; + goto out; + } + + asd = v4l2_async_nf_add_fwnode(&vin->notifier, fwnode, + struct v4l2_async_subdev); + if (IS_ERR(asd)) { + ret = PTR_ERR(asd); + goto out; + } + + vin->parallel.asd = asd; + + vin_dbg(vin, "Add parallel OF device %pOF\n", to_of_node(fwnode)); +out: + fwnode_handle_put(fwnode); + + return ret; +} + +static void rvin_parallel_cleanup(struct rvin_dev *vin) +{ + v4l2_async_nf_unregister(&vin->notifier); + v4l2_async_nf_cleanup(&vin->notifier); +} + +static int rvin_parallel_init(struct rvin_dev *vin) +{ + int ret; + + v4l2_async_nf_init(&vin->notifier); + + ret = rvin_parallel_parse_of(vin); + if (ret) + return ret; + + if (!vin->parallel.asd) + return -ENODEV; + + vin_dbg(vin, "Found parallel subdevice %pOF\n", + to_of_node(vin->parallel.asd->match.fwnode)); + + vin->notifier.ops = &rvin_parallel_notify_ops; + ret = v4l2_async_nf_register(&vin->v4l2_dev, &vin->notifier); + if (ret < 0) { + vin_err(vin, "Notifier registration failed\n"); + v4l2_async_nf_cleanup(&vin->notifier); + return ret; + } + + return 0; +} + +/* ----------------------------------------------------------------------------- + * CSI-2 + */ + +/* + * Link setup for the links between a VIN and a CSI-2 receiver is a bit + * complex. The reason for this is that the register controlling routing + * is not present in each VIN instance. There are special VINs which + * control routing for themselves and other VINs. There are not many + * different possible links combinations that can be enabled at the same + * time, therefor all already enabled links which are controlled by a + * master VIN need to be taken into account when making the decision + * if a new link can be enabled or not. + * + * 1. Find out which VIN the link the user tries to enable is connected to. + * 2. Lookup which master VIN controls the links for this VIN. + * 3. Start with a bitmask with all bits set. + * 4. For each previously enabled link from the master VIN bitwise AND its + * route mask (see documentation for mask in struct rvin_group_route) + * with the bitmask. + * 5. Bitwise AND the mask for the link the user tries to enable to the bitmask. + * 6. If the bitmask is not empty at this point the new link can be enabled + * while keeping all previous links enabled. Update the CHSEL value of the + * master VIN and inform the user that the link could be enabled. + * + * Please note that no link can be enabled if any VIN in the group is + * currently open. + */ +static int rvin_csi2_link_notify(struct media_link *link, u32 flags, + unsigned int notification) +{ + struct rvin_group *group = container_of(link->graph_obj.mdev, + struct rvin_group, mdev); + struct media_entity *entity; + struct video_device *vdev; + struct rvin_dev *vin; + unsigned int i; + int csi_id, ret; + + ret = v4l2_pipeline_link_notify(link, flags, notification); + if (ret) + return ret; + + /* Only care about link enablement for VIN nodes. */ + if (!(flags & MEDIA_LNK_FL_ENABLED) || + !is_media_entity_v4l2_video_device(link->sink->entity)) + return 0; + + /* + * Don't allow link changes if any stream in the graph is active as + * modifying the CHSEL register fields can disrupt running streams. + */ + media_device_for_each_entity(entity, &group->mdev) + if (media_entity_is_streaming(entity)) + return -EBUSY; + + /* Find the master VIN that controls the routes. */ + vdev = media_entity_to_video_device(link->sink->entity); + vin = container_of(vdev, struct rvin_dev, vdev); + + mutex_lock(&group->lock); + + csi_id = rvin_group_entity_to_remote_id(group, link->source->entity); + if (csi_id == -ENODEV) { + struct v4l2_subdev *sd; + + /* + * Make sure the source entity subdevice is registered as + * a parallel input of one of the enabled VINs if it is not + * one of the CSI-2 subdevices. + * + * No hardware configuration required for parallel inputs, + * we can return here. + */ + sd = media_entity_to_v4l2_subdev(link->source->entity); + for (i = 0; i < RCAR_VIN_NUM; i++) { + if (group->vin[i] && + group->vin[i]->parallel.subdev == sd) { + group->vin[i]->is_csi = false; + ret = 0; + goto out; + } + } + + vin_err(vin, "Subdevice %s not registered to any VIN\n", + link->source->entity->name); + ret = -ENODEV; + } else { + const struct rvin_group_route *route; + unsigned int chsel = UINT_MAX; + unsigned int master_id; + + master_id = rvin_group_id_to_master(vin->id); + + if (WARN_ON(!group->vin[master_id])) { + ret = -ENODEV; + goto out; + } + + /* Make sure group is connected to same CSI-2 */ + for (i = master_id; i < master_id + 4; i++) { + struct media_pad *csi_pad; + + if (!group->vin[i]) + continue; + + /* Get remote CSI-2, if any. */ + csi_pad = media_pad_remote_pad_first( + &group->vin[i]->vdev.entity.pads[0]); + if (!csi_pad) + continue; + + if (csi_pad->entity != link->source->entity) { + vin_dbg(vin, "Already attached to %s\n", + csi_pad->entity->name); + ret = -EBUSY; + goto out; + } + } + + for (route = vin->info->routes; route->chsel; route++) { + if (route->master == master_id && route->csi == csi_id) { + chsel = route->chsel; + break; + } + } + + if (chsel == UINT_MAX) { + vin_err(vin, "No CHSEL value found\n"); + ret = -EINVAL; + goto out; + } + + ret = rvin_set_channel_routing(group->vin[master_id], chsel); + if (ret) + goto out; + + vin->is_csi = true; + } +out: + mutex_unlock(&group->lock); + + return ret; +} + +static const struct media_device_ops rvin_csi2_media_ops = { + .link_notify = rvin_csi2_link_notify, +}; + +static int rvin_csi2_create_link(struct rvin_group *group, unsigned int id, + const struct rvin_group_route *route) +{ + struct media_entity *source = &group->remotes[route->csi].subdev->entity; + struct media_entity *sink = &group->vin[id]->vdev.entity; + struct media_pad *sink_pad = &sink->pads[0]; + unsigned int channel; + int ret; + + for (channel = 0; channel < 4; channel++) { + unsigned int source_idx = rvin_group_csi_channel_to_pad(channel); + struct media_pad *source_pad = &source->pads[source_idx]; + + /* Skip if link already exists. */ + if (media_entity_find_link(source_pad, sink_pad)) + continue; + + ret = media_create_pad_link(source, source_idx, sink, 0, 0); + if (ret) + return ret; + } + + return 0; +} + +static int rvin_csi2_setup_links(struct rvin_dev *vin) +{ + const struct rvin_group_route *route; + unsigned int id; + int ret = -EINVAL; + + /* Create all media device links between VINs and CSI-2's. */ + mutex_lock(&vin->group->lock); + for (route = vin->info->routes; route->chsel; route++) { + /* Check that VIN' master is part of the group. */ + if (!vin->group->vin[route->master]) + continue; + + /* Check that CSI-2 is part of the group. */ + if (!vin->group->remotes[route->csi].subdev) + continue; + + for (id = route->master; id < route->master + 4; id++) { + /* Check that VIN is part of the group. */ + if (!vin->group->vin[id]) + continue; + + ret = rvin_csi2_create_link(vin->group, id, route); + if (ret) + goto out; + } + } +out: + mutex_unlock(&vin->group->lock); + + return ret; +} + +static void rvin_csi2_cleanup(struct rvin_dev *vin) +{ + rvin_parallel_cleanup(vin); + rvin_group_notifier_cleanup(vin); + rvin_group_put(vin); + rvin_free_controls(vin); +} + +static int rvin_csi2_init(struct rvin_dev *vin) +{ + int ret; + + vin->pad.flags = MEDIA_PAD_FL_SINK; + ret = media_entity_pads_init(&vin->vdev.entity, 1, &vin->pad); + if (ret) + return ret; + + ret = rvin_create_controls(vin, NULL); + if (ret < 0) + return ret; + + ret = rvin_group_get(vin, rvin_csi2_setup_links, &rvin_csi2_media_ops); + if (ret) + goto err_controls; + + /* It's OK to not have a parallel subdevice. */ + ret = rvin_parallel_init(vin); + if (ret && ret != -ENODEV) + goto err_group; + + ret = rvin_group_notifier_init(vin, 1, RVIN_CSI_MAX); + if (ret) + goto err_parallel; + + return 0; +err_parallel: + rvin_parallel_cleanup(vin); +err_group: + rvin_group_put(vin); +err_controls: + rvin_free_controls(vin); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * ISP + */ + +static int rvin_isp_setup_links(struct rvin_dev *vin) +{ + unsigned int i; + int ret = -EINVAL; + + /* Create all media device links between VINs and ISP's. */ + mutex_lock(&vin->group->lock); + for (i = 0; i < RCAR_VIN_NUM; i++) { + struct media_pad *source_pad, *sink_pad; + struct media_entity *source, *sink; + unsigned int source_slot = i / 8; + unsigned int source_idx = i % 8 + 1; + + if (!vin->group->vin[i]) + continue; + + /* Check that ISP is part of the group. */ + if (!vin->group->remotes[source_slot].subdev) + continue; + + source = &vin->group->remotes[source_slot].subdev->entity; + source_pad = &source->pads[source_idx]; + + sink = &vin->group->vin[i]->vdev.entity; + sink_pad = &sink->pads[0]; + + /* Skip if link already exists. */ + if (media_entity_find_link(source_pad, sink_pad)) + continue; + + ret = media_create_pad_link(source, source_idx, sink, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + vin_err(vin, "Error adding link from %s to %s\n", + source->name, sink->name); + break; + } + } + mutex_unlock(&vin->group->lock); + + return ret; +} + +static void rvin_isp_cleanup(struct rvin_dev *vin) +{ + rvin_group_notifier_cleanup(vin); + rvin_group_put(vin); + rvin_free_controls(vin); +} + +static int rvin_isp_init(struct rvin_dev *vin) +{ + int ret; + + vin->pad.flags = MEDIA_PAD_FL_SINK; + ret = media_entity_pads_init(&vin->vdev.entity, 1, &vin->pad); + if (ret) + return ret; + + ret = rvin_create_controls(vin, NULL); + if (ret < 0) + return ret; + + ret = rvin_group_get(vin, rvin_isp_setup_links, NULL); + if (ret) + goto err_controls; + + ret = rvin_group_notifier_init(vin, 2, RVIN_ISP_MAX); + if (ret) + goto err_group; + + return 0; +err_group: + rvin_group_put(vin); +err_controls: + rvin_free_controls(vin); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Suspend / Resume + */ + +static int __maybe_unused rvin_suspend(struct device *dev) +{ + struct rvin_dev *vin = dev_get_drvdata(dev); + + if (vin->state != RUNNING) + return 0; + + rvin_stop_streaming(vin); + + vin->state = SUSPENDED; + + return 0; +} + +static int __maybe_unused rvin_resume(struct device *dev) +{ + struct rvin_dev *vin = dev_get_drvdata(dev); + + if (vin->state != SUSPENDED) + return 0; + + /* + * Restore group master CHSEL setting. + * + * This needs to be done by every VIN resuming not only the master + * as we don't know if and in which order the master VINs will + * be resumed. + */ + if (vin->info->use_mc) { + unsigned int master_id = rvin_group_id_to_master(vin->id); + struct rvin_dev *master = vin->group->vin[master_id]; + int ret; + + if (WARN_ON(!master)) + return -ENODEV; + + ret = rvin_set_channel_routing(master, master->chsel); + if (ret) + return ret; + } + + return rvin_start_streaming(vin); +} + +/* ----------------------------------------------------------------------------- + * Platform Device Driver + */ + +static const struct rvin_info rcar_info_h1 = { + .model = RCAR_H1, + .use_mc = false, + .max_width = 2048, + .max_height = 2048, +}; + +static const struct rvin_info rcar_info_m1 = { + .model = RCAR_M1, + .use_mc = false, + .max_width = 2048, + .max_height = 2048, +}; + +static const struct rvin_info rcar_info_gen2 = { + .model = RCAR_GEN2, + .use_mc = false, + .max_width = 2048, + .max_height = 2048, +}; + +static const struct rvin_group_route rcar_info_r8a774e1_routes[] = { + { .master = 0, .csi = RVIN_CSI20, .chsel = 0x04 }, + { .master = 0, .csi = RVIN_CSI40, .chsel = 0x03 }, + { .master = 4, .csi = RVIN_CSI20, .chsel = 0x04 }, + { /* Sentinel */ } +}; + +static const struct rvin_info rcar_info_r8a774e1 = { + .model = RCAR_GEN3, + .use_mc = true, + .max_width = 4096, + .max_height = 4096, + .routes = rcar_info_r8a774e1_routes, +}; + +static const struct rvin_group_route rcar_info_r8a7795_routes[] = { + { .master = 0, .csi = RVIN_CSI20, .chsel = 0x04 }, + { .master = 0, .csi = RVIN_CSI40, .chsel = 0x03 }, + { .master = 4, .csi = RVIN_CSI20, .chsel = 0x04 }, + { .master = 4, .csi = RVIN_CSI41, .chsel = 0x03 }, + { /* Sentinel */ } +}; + +static const struct rvin_info rcar_info_r8a7795 = { + .model = RCAR_GEN3, + .use_mc = true, + .nv12 = true, + .max_width = 4096, + .max_height = 4096, + .routes = rcar_info_r8a7795_routes, +}; + +static const struct rvin_group_route rcar_info_r8a7795es1_routes[] = { + { .master = 0, .csi = RVIN_CSI20, .chsel = 0x04 }, + { .master = 0, .csi = RVIN_CSI21, .chsel = 0x05 }, + { .master = 0, .csi = RVIN_CSI40, .chsel = 0x03 }, + { .master = 4, .csi = RVIN_CSI20, .chsel = 0x04 }, + { .master = 4, .csi = RVIN_CSI21, .chsel = 0x05 }, + { .master = 4, .csi = RVIN_CSI41, .chsel = 0x03 }, + { /* Sentinel */ } +}; + +static const struct rvin_info rcar_info_r8a7795es1 = { + .model = RCAR_GEN3, + .use_mc = true, + .max_width = 4096, + .max_height = 4096, + .routes = rcar_info_r8a7795es1_routes, +}; + +static const struct rvin_group_route rcar_info_r8a7796_routes[] = { + { .master = 0, .csi = RVIN_CSI20, .chsel = 0x04 }, + { .master = 0, .csi = RVIN_CSI40, .chsel = 0x03 }, + { .master = 4, .csi = RVIN_CSI20, .chsel = 0x04 }, + { .master = 4, .csi = RVIN_CSI40, .chsel = 0x03 }, + { /* Sentinel */ } +}; + +static const struct rvin_info rcar_info_r8a7796 = { + .model = RCAR_GEN3, + .use_mc = true, + .nv12 = true, + .max_width = 4096, + .max_height = 4096, + .routes = rcar_info_r8a7796_routes, +}; + +static const struct rvin_group_route rcar_info_r8a77965_routes[] = { + { .master = 0, .csi = RVIN_CSI20, .chsel = 0x04 }, + { .master = 0, .csi = RVIN_CSI40, .chsel = 0x03 }, + { .master = 4, .csi = RVIN_CSI20, .chsel = 0x04 }, + { .master = 4, .csi = RVIN_CSI40, .chsel = 0x03 }, + { /* Sentinel */ } +}; + +static const struct rvin_info rcar_info_r8a77965 = { + .model = RCAR_GEN3, + .use_mc = true, + .nv12 = true, + .max_width = 4096, + .max_height = 4096, + .routes = rcar_info_r8a77965_routes, +}; + +static const struct rvin_group_route rcar_info_r8a77970_routes[] = { + { .master = 0, .csi = RVIN_CSI40, .chsel = 0x03 }, + { /* Sentinel */ } +}; + +static const struct rvin_info rcar_info_r8a77970 = { + .model = RCAR_GEN3, + .use_mc = true, + .max_width = 4096, + .max_height = 4096, + .routes = rcar_info_r8a77970_routes, +}; + +static const struct rvin_group_route rcar_info_r8a77980_routes[] = { + { .master = 0, .csi = RVIN_CSI40, .chsel = 0x03 }, + { .master = 4, .csi = RVIN_CSI41, .chsel = 0x03 }, + { /* Sentinel */ } +}; + +static const struct rvin_info rcar_info_r8a77980 = { + .model = RCAR_GEN3, + .use_mc = true, + .nv12 = true, + .max_width = 4096, + .max_height = 4096, + .routes = rcar_info_r8a77980_routes, +}; + +static const struct rvin_group_route rcar_info_r8a77990_routes[] = { + { .master = 4, .csi = RVIN_CSI40, .chsel = 0x03 }, + { /* Sentinel */ } +}; + +static const struct rvin_info rcar_info_r8a77990 = { + .model = RCAR_GEN3, + .use_mc = true, + .nv12 = true, + .max_width = 4096, + .max_height = 4096, + .routes = rcar_info_r8a77990_routes, +}; + +static const struct rvin_group_route rcar_info_r8a77995_routes[] = { + { /* Sentinel */ } +}; + +static const struct rvin_info rcar_info_r8a77995 = { + .model = RCAR_GEN3, + .use_mc = true, + .nv12 = true, + .max_width = 4096, + .max_height = 4096, + .routes = rcar_info_r8a77995_routes, +}; + +static const struct rvin_info rcar_info_r8a779a0 = { + .model = RCAR_GEN3, + .use_mc = true, + .use_isp = true, + .nv12 = true, + .max_width = 4096, + .max_height = 4096, +}; + +static const struct of_device_id rvin_of_id_table[] = { + { + .compatible = "renesas,vin-r8a774a1", + .data = &rcar_info_r8a7796, + }, + { + .compatible = "renesas,vin-r8a774b1", + .data = &rcar_info_r8a77965, + }, + { + .compatible = "renesas,vin-r8a774c0", + .data = &rcar_info_r8a77990, + }, + { + .compatible = "renesas,vin-r8a774e1", + .data = &rcar_info_r8a774e1, + }, + { + .compatible = "renesas,vin-r8a7778", + .data = &rcar_info_m1, + }, + { + .compatible = "renesas,vin-r8a7779", + .data = &rcar_info_h1, + }, + { + .compatible = "renesas,rcar-gen2-vin", + .data = &rcar_info_gen2, + }, + { + .compatible = "renesas,vin-r8a7795", + .data = &rcar_info_r8a7795, + }, + { + .compatible = "renesas,vin-r8a7796", + .data = &rcar_info_r8a7796, + }, + { + .compatible = "renesas,vin-r8a77961", + .data = &rcar_info_r8a7796, + }, + { + .compatible = "renesas,vin-r8a77965", + .data = &rcar_info_r8a77965, + }, + { + .compatible = "renesas,vin-r8a77970", + .data = &rcar_info_r8a77970, + }, + { + .compatible = "renesas,vin-r8a77980", + .data = &rcar_info_r8a77980, + }, + { + .compatible = "renesas,vin-r8a77990", + .data = &rcar_info_r8a77990, + }, + { + .compatible = "renesas,vin-r8a77995", + .data = &rcar_info_r8a77995, + }, + { + .compatible = "renesas,vin-r8a779a0", + .data = &rcar_info_r8a779a0, + }, + { /* Sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rvin_of_id_table); + +static const struct soc_device_attribute r8a7795es1[] = { + { + .soc_id = "r8a7795", .revision = "ES1.*", + .data = &rcar_info_r8a7795es1, + }, + { /* Sentinel */ } +}; + +static int rcar_vin_probe(struct platform_device *pdev) +{ + const struct soc_device_attribute *attr; + struct rvin_dev *vin; + int irq, ret; + + vin = devm_kzalloc(&pdev->dev, sizeof(*vin), GFP_KERNEL); + if (!vin) + return -ENOMEM; + + vin->dev = &pdev->dev; + vin->info = of_device_get_match_data(&pdev->dev); + vin->alpha = 0xff; + + /* + * Special care is needed on r8a7795 ES1.x since it + * uses different routing than r8a7795 ES2.0. + */ + attr = soc_device_match(r8a7795es1); + if (attr) + vin->info = attr->data; + + vin->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(vin->base)) + return PTR_ERR(vin->base); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = rvin_dma_register(vin, irq); + if (ret) + return ret; + + platform_set_drvdata(pdev, vin); + + if (vin->info->use_isp) + ret = rvin_isp_init(vin); + else if (vin->info->use_mc) + ret = rvin_csi2_init(vin); + else + ret = rvin_parallel_init(vin); + + if (ret) { + rvin_dma_unregister(vin); + return ret; + } + + pm_suspend_ignore_children(&pdev->dev, true); + pm_runtime_enable(&pdev->dev); + + return 0; +} + +static int rcar_vin_remove(struct platform_device *pdev) +{ + struct rvin_dev *vin = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + + rvin_v4l2_unregister(vin); + + if (vin->info->use_isp) + rvin_isp_cleanup(vin); + else if (vin->info->use_mc) + rvin_csi2_cleanup(vin); + else + rvin_parallel_cleanup(vin); + + rvin_dma_unregister(vin); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(rvin_pm_ops, rvin_suspend, rvin_resume); + +static struct platform_driver rcar_vin_driver = { + .driver = { + .name = "rcar-vin", + .suppress_bind_attrs = true, + .pm = &rvin_pm_ops, + .of_match_table = rvin_of_id_table, + }, + .probe = rcar_vin_probe, + .remove = rcar_vin_remove, +}; + +module_platform_driver(rcar_vin_driver); + +MODULE_AUTHOR("Niklas Söderlund <niklas.soderlund@ragnatech.se>"); +MODULE_DESCRIPTION("Renesas R-Car VIN camera host driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-csi2.c b/drivers/media/platform/renesas/rcar-vin/rcar-csi2.c new file mode 100644 index 000000000..174aa6176 --- /dev/null +++ b/drivers/media/platform/renesas/rcar-vin/rcar-csi2.c @@ -0,0 +1,1606 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Renesas R-Car MIPI CSI-2 Receiver + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> +#include <linux/sys_soc.h> + +#include <media/mipi-csi2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-mc.h> +#include <media/v4l2-subdev.h> + +struct rcar_csi2; + +/* Register offsets and bits */ + +/* Control Timing Select */ +#define TREF_REG 0x00 +#define TREF_TREF BIT(0) + +/* Software Reset */ +#define SRST_REG 0x04 +#define SRST_SRST BIT(0) + +/* PHY Operation Control */ +#define PHYCNT_REG 0x08 +#define PHYCNT_SHUTDOWNZ BIT(17) +#define PHYCNT_RSTZ BIT(16) +#define PHYCNT_ENABLECLK BIT(4) +#define PHYCNT_ENABLE_3 BIT(3) +#define PHYCNT_ENABLE_2 BIT(2) +#define PHYCNT_ENABLE_1 BIT(1) +#define PHYCNT_ENABLE_0 BIT(0) + +/* Checksum Control */ +#define CHKSUM_REG 0x0c +#define CHKSUM_ECC_EN BIT(1) +#define CHKSUM_CRC_EN BIT(0) + +/* + * Channel Data Type Select + * VCDT[0-15]: Channel 0 VCDT[16-31]: Channel 1 + * VCDT2[0-15]: Channel 2 VCDT2[16-31]: Channel 3 + */ +#define VCDT_REG 0x10 +#define VCDT2_REG 0x14 +#define VCDT_VCDTN_EN BIT(15) +#define VCDT_SEL_VC(n) (((n) & 0x3) << 8) +#define VCDT_SEL_DTN_ON BIT(6) +#define VCDT_SEL_DT(n) (((n) & 0x3f) << 0) + +/* Frame Data Type Select */ +#define FRDT_REG 0x18 + +/* Field Detection Control */ +#define FLD_REG 0x1c +#define FLD_FLD_NUM(n) (((n) & 0xff) << 16) +#define FLD_DET_SEL(n) (((n) & 0x3) << 4) +#define FLD_FLD_EN4 BIT(3) +#define FLD_FLD_EN3 BIT(2) +#define FLD_FLD_EN2 BIT(1) +#define FLD_FLD_EN BIT(0) + +/* Automatic Standby Control */ +#define ASTBY_REG 0x20 + +/* Long Data Type Setting 0 */ +#define LNGDT0_REG 0x28 + +/* Long Data Type Setting 1 */ +#define LNGDT1_REG 0x2c + +/* Interrupt Enable */ +#define INTEN_REG 0x30 +#define INTEN_INT_AFIFO_OF BIT(27) +#define INTEN_INT_ERRSOTHS BIT(4) +#define INTEN_INT_ERRSOTSYNCHS BIT(3) + +/* Interrupt Source Mask */ +#define INTCLOSE_REG 0x34 + +/* Interrupt Status Monitor */ +#define INTSTATE_REG 0x38 +#define INTSTATE_INT_ULPS_START BIT(7) +#define INTSTATE_INT_ULPS_END BIT(6) + +/* Interrupt Error Status Monitor */ +#define INTERRSTATE_REG 0x3c + +/* Short Packet Data */ +#define SHPDAT_REG 0x40 + +/* Short Packet Count */ +#define SHPCNT_REG 0x44 + +/* LINK Operation Control */ +#define LINKCNT_REG 0x48 +#define LINKCNT_MONITOR_EN BIT(31) +#define LINKCNT_REG_MONI_PACT_EN BIT(25) +#define LINKCNT_ICLK_NONSTOP BIT(24) + +/* Lane Swap */ +#define LSWAP_REG 0x4c +#define LSWAP_L3SEL(n) (((n) & 0x3) << 6) +#define LSWAP_L2SEL(n) (((n) & 0x3) << 4) +#define LSWAP_L1SEL(n) (((n) & 0x3) << 2) +#define LSWAP_L0SEL(n) (((n) & 0x3) << 0) + +/* PHY Test Interface Write Register */ +#define PHTW_REG 0x50 +#define PHTW_DWEN BIT(24) +#define PHTW_TESTDIN_DATA(n) (((n & 0xff)) << 16) +#define PHTW_CWEN BIT(8) +#define PHTW_TESTDIN_CODE(n) ((n & 0xff)) + +#define PHYFRX_REG 0x64 +#define PHYFRX_FORCERX_MODE_3 BIT(3) +#define PHYFRX_FORCERX_MODE_2 BIT(2) +#define PHYFRX_FORCERX_MODE_1 BIT(1) +#define PHYFRX_FORCERX_MODE_0 BIT(0) + +struct phtw_value { + u16 data; + u16 code; +}; + +struct rcsi2_mbps_reg { + u16 mbps; + u16 reg; +}; + +static const struct rcsi2_mbps_reg phtw_mbps_v3u[] = { + { .mbps = 1500, .reg = 0xcc }, + { .mbps = 1550, .reg = 0x1d }, + { .mbps = 1600, .reg = 0x27 }, + { .mbps = 1650, .reg = 0x30 }, + { .mbps = 1700, .reg = 0x39 }, + { .mbps = 1750, .reg = 0x42 }, + { .mbps = 1800, .reg = 0x4b }, + { .mbps = 1850, .reg = 0x55 }, + { .mbps = 1900, .reg = 0x5e }, + { .mbps = 1950, .reg = 0x67 }, + { .mbps = 2000, .reg = 0x71 }, + { .mbps = 2050, .reg = 0x79 }, + { .mbps = 2100, .reg = 0x83 }, + { .mbps = 2150, .reg = 0x8c }, + { .mbps = 2200, .reg = 0x95 }, + { .mbps = 2250, .reg = 0x9e }, + { .mbps = 2300, .reg = 0xa7 }, + { .mbps = 2350, .reg = 0xb0 }, + { .mbps = 2400, .reg = 0xba }, + { .mbps = 2450, .reg = 0xc3 }, + { .mbps = 2500, .reg = 0xcc }, + { /* sentinel */ }, +}; + +static const struct rcsi2_mbps_reg phtw_mbps_h3_v3h_m3n[] = { + { .mbps = 80, .reg = 0x86 }, + { .mbps = 90, .reg = 0x86 }, + { .mbps = 100, .reg = 0x87 }, + { .mbps = 110, .reg = 0x87 }, + { .mbps = 120, .reg = 0x88 }, + { .mbps = 130, .reg = 0x88 }, + { .mbps = 140, .reg = 0x89 }, + { .mbps = 150, .reg = 0x89 }, + { .mbps = 160, .reg = 0x8a }, + { .mbps = 170, .reg = 0x8a }, + { .mbps = 180, .reg = 0x8b }, + { .mbps = 190, .reg = 0x8b }, + { .mbps = 205, .reg = 0x8c }, + { .mbps = 220, .reg = 0x8d }, + { .mbps = 235, .reg = 0x8e }, + { .mbps = 250, .reg = 0x8e }, + { /* sentinel */ }, +}; + +static const struct rcsi2_mbps_reg phtw_mbps_v3m_e3[] = { + { .mbps = 80, .reg = 0x00 }, + { .mbps = 90, .reg = 0x20 }, + { .mbps = 100, .reg = 0x40 }, + { .mbps = 110, .reg = 0x02 }, + { .mbps = 130, .reg = 0x22 }, + { .mbps = 140, .reg = 0x42 }, + { .mbps = 150, .reg = 0x04 }, + { .mbps = 170, .reg = 0x24 }, + { .mbps = 180, .reg = 0x44 }, + { .mbps = 200, .reg = 0x06 }, + { .mbps = 220, .reg = 0x26 }, + { .mbps = 240, .reg = 0x46 }, + { .mbps = 250, .reg = 0x08 }, + { .mbps = 270, .reg = 0x28 }, + { .mbps = 300, .reg = 0x0a }, + { .mbps = 330, .reg = 0x2a }, + { .mbps = 360, .reg = 0x4a }, + { .mbps = 400, .reg = 0x0c }, + { .mbps = 450, .reg = 0x2c }, + { .mbps = 500, .reg = 0x0e }, + { .mbps = 550, .reg = 0x2e }, + { .mbps = 600, .reg = 0x10 }, + { .mbps = 650, .reg = 0x30 }, + { .mbps = 700, .reg = 0x12 }, + { .mbps = 750, .reg = 0x32 }, + { .mbps = 800, .reg = 0x52 }, + { .mbps = 850, .reg = 0x72 }, + { .mbps = 900, .reg = 0x14 }, + { .mbps = 950, .reg = 0x34 }, + { .mbps = 1000, .reg = 0x54 }, + { .mbps = 1050, .reg = 0x74 }, + { .mbps = 1125, .reg = 0x16 }, + { /* sentinel */ }, +}; + +/* PHY Test Interface Clear */ +#define PHTC_REG 0x58 +#define PHTC_TESTCLR BIT(0) + +/* PHY Frequency Control */ +#define PHYPLL_REG 0x68 +#define PHYPLL_HSFREQRANGE(n) ((n) << 16) + +static const struct rcsi2_mbps_reg hsfreqrange_v3u[] = { + { .mbps = 80, .reg = 0x00 }, + { .mbps = 90, .reg = 0x10 }, + { .mbps = 100, .reg = 0x20 }, + { .mbps = 110, .reg = 0x30 }, + { .mbps = 120, .reg = 0x01 }, + { .mbps = 130, .reg = 0x11 }, + { .mbps = 140, .reg = 0x21 }, + { .mbps = 150, .reg = 0x31 }, + { .mbps = 160, .reg = 0x02 }, + { .mbps = 170, .reg = 0x12 }, + { .mbps = 180, .reg = 0x22 }, + { .mbps = 190, .reg = 0x32 }, + { .mbps = 205, .reg = 0x03 }, + { .mbps = 220, .reg = 0x13 }, + { .mbps = 235, .reg = 0x23 }, + { .mbps = 250, .reg = 0x33 }, + { .mbps = 275, .reg = 0x04 }, + { .mbps = 300, .reg = 0x14 }, + { .mbps = 325, .reg = 0x25 }, + { .mbps = 350, .reg = 0x35 }, + { .mbps = 400, .reg = 0x05 }, + { .mbps = 450, .reg = 0x16 }, + { .mbps = 500, .reg = 0x26 }, + { .mbps = 550, .reg = 0x37 }, + { .mbps = 600, .reg = 0x07 }, + { .mbps = 650, .reg = 0x18 }, + { .mbps = 700, .reg = 0x28 }, + { .mbps = 750, .reg = 0x39 }, + { .mbps = 800, .reg = 0x09 }, + { .mbps = 850, .reg = 0x19 }, + { .mbps = 900, .reg = 0x29 }, + { .mbps = 950, .reg = 0x3a }, + { .mbps = 1000, .reg = 0x0a }, + { .mbps = 1050, .reg = 0x1a }, + { .mbps = 1100, .reg = 0x2a }, + { .mbps = 1150, .reg = 0x3b }, + { .mbps = 1200, .reg = 0x0b }, + { .mbps = 1250, .reg = 0x1b }, + { .mbps = 1300, .reg = 0x2b }, + { .mbps = 1350, .reg = 0x3c }, + { .mbps = 1400, .reg = 0x0c }, + { .mbps = 1450, .reg = 0x1c }, + { .mbps = 1500, .reg = 0x2c }, + { .mbps = 1550, .reg = 0x3d }, + { .mbps = 1600, .reg = 0x0d }, + { .mbps = 1650, .reg = 0x1d }, + { .mbps = 1700, .reg = 0x2e }, + { .mbps = 1750, .reg = 0x3e }, + { .mbps = 1800, .reg = 0x0e }, + { .mbps = 1850, .reg = 0x1e }, + { .mbps = 1900, .reg = 0x2f }, + { .mbps = 1950, .reg = 0x3f }, + { .mbps = 2000, .reg = 0x0f }, + { .mbps = 2050, .reg = 0x40 }, + { .mbps = 2100, .reg = 0x41 }, + { .mbps = 2150, .reg = 0x42 }, + { .mbps = 2200, .reg = 0x43 }, + { .mbps = 2300, .reg = 0x45 }, + { .mbps = 2350, .reg = 0x46 }, + { .mbps = 2400, .reg = 0x47 }, + { .mbps = 2450, .reg = 0x48 }, + { .mbps = 2500, .reg = 0x49 }, + { /* sentinel */ }, +}; + +static const struct rcsi2_mbps_reg hsfreqrange_h3_v3h_m3n[] = { + { .mbps = 80, .reg = 0x00 }, + { .mbps = 90, .reg = 0x10 }, + { .mbps = 100, .reg = 0x20 }, + { .mbps = 110, .reg = 0x30 }, + { .mbps = 120, .reg = 0x01 }, + { .mbps = 130, .reg = 0x11 }, + { .mbps = 140, .reg = 0x21 }, + { .mbps = 150, .reg = 0x31 }, + { .mbps = 160, .reg = 0x02 }, + { .mbps = 170, .reg = 0x12 }, + { .mbps = 180, .reg = 0x22 }, + { .mbps = 190, .reg = 0x32 }, + { .mbps = 205, .reg = 0x03 }, + { .mbps = 220, .reg = 0x13 }, + { .mbps = 235, .reg = 0x23 }, + { .mbps = 250, .reg = 0x33 }, + { .mbps = 275, .reg = 0x04 }, + { .mbps = 300, .reg = 0x14 }, + { .mbps = 325, .reg = 0x25 }, + { .mbps = 350, .reg = 0x35 }, + { .mbps = 400, .reg = 0x05 }, + { .mbps = 450, .reg = 0x16 }, + { .mbps = 500, .reg = 0x26 }, + { .mbps = 550, .reg = 0x37 }, + { .mbps = 600, .reg = 0x07 }, + { .mbps = 650, .reg = 0x18 }, + { .mbps = 700, .reg = 0x28 }, + { .mbps = 750, .reg = 0x39 }, + { .mbps = 800, .reg = 0x09 }, + { .mbps = 850, .reg = 0x19 }, + { .mbps = 900, .reg = 0x29 }, + { .mbps = 950, .reg = 0x3a }, + { .mbps = 1000, .reg = 0x0a }, + { .mbps = 1050, .reg = 0x1a }, + { .mbps = 1100, .reg = 0x2a }, + { .mbps = 1150, .reg = 0x3b }, + { .mbps = 1200, .reg = 0x0b }, + { .mbps = 1250, .reg = 0x1b }, + { .mbps = 1300, .reg = 0x2b }, + { .mbps = 1350, .reg = 0x3c }, + { .mbps = 1400, .reg = 0x0c }, + { .mbps = 1450, .reg = 0x1c }, + { .mbps = 1500, .reg = 0x2c }, + { /* sentinel */ }, +}; + +static const struct rcsi2_mbps_reg hsfreqrange_m3w_h3es1[] = { + { .mbps = 80, .reg = 0x00 }, + { .mbps = 90, .reg = 0x10 }, + { .mbps = 100, .reg = 0x20 }, + { .mbps = 110, .reg = 0x30 }, + { .mbps = 120, .reg = 0x01 }, + { .mbps = 130, .reg = 0x11 }, + { .mbps = 140, .reg = 0x21 }, + { .mbps = 150, .reg = 0x31 }, + { .mbps = 160, .reg = 0x02 }, + { .mbps = 170, .reg = 0x12 }, + { .mbps = 180, .reg = 0x22 }, + { .mbps = 190, .reg = 0x32 }, + { .mbps = 205, .reg = 0x03 }, + { .mbps = 220, .reg = 0x13 }, + { .mbps = 235, .reg = 0x23 }, + { .mbps = 250, .reg = 0x33 }, + { .mbps = 275, .reg = 0x04 }, + { .mbps = 300, .reg = 0x14 }, + { .mbps = 325, .reg = 0x05 }, + { .mbps = 350, .reg = 0x15 }, + { .mbps = 400, .reg = 0x25 }, + { .mbps = 450, .reg = 0x06 }, + { .mbps = 500, .reg = 0x16 }, + { .mbps = 550, .reg = 0x07 }, + { .mbps = 600, .reg = 0x17 }, + { .mbps = 650, .reg = 0x08 }, + { .mbps = 700, .reg = 0x18 }, + { .mbps = 750, .reg = 0x09 }, + { .mbps = 800, .reg = 0x19 }, + { .mbps = 850, .reg = 0x29 }, + { .mbps = 900, .reg = 0x39 }, + { .mbps = 950, .reg = 0x0a }, + { .mbps = 1000, .reg = 0x1a }, + { .mbps = 1050, .reg = 0x2a }, + { .mbps = 1100, .reg = 0x3a }, + { .mbps = 1150, .reg = 0x0b }, + { .mbps = 1200, .reg = 0x1b }, + { .mbps = 1250, .reg = 0x2b }, + { .mbps = 1300, .reg = 0x3b }, + { .mbps = 1350, .reg = 0x0c }, + { .mbps = 1400, .reg = 0x1c }, + { .mbps = 1450, .reg = 0x2c }, + { .mbps = 1500, .reg = 0x3c }, + { /* sentinel */ }, +}; + +/* PHY ESC Error Monitor */ +#define PHEERM_REG 0x74 + +/* PHY Clock Lane Monitor */ +#define PHCLM_REG 0x78 +#define PHCLM_STOPSTATECKL BIT(0) + +/* PHY Data Lane Monitor */ +#define PHDLM_REG 0x7c + +/* CSI0CLK Frequency Configuration Preset Register */ +#define CSI0CLKFCPR_REG 0x260 +#define CSI0CLKFREQRANGE(n) ((n & 0x3f) << 16) + +struct rcar_csi2_format { + u32 code; + unsigned int datatype; + unsigned int bpp; +}; + +static const struct rcar_csi2_format rcar_csi2_formats[] = { + { + .code = MEDIA_BUS_FMT_RGB888_1X24, + .datatype = MIPI_CSI2_DT_RGB888, + .bpp = 24, + }, { + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .datatype = MIPI_CSI2_DT_YUV422_8B, + .bpp = 16, + }, { + .code = MEDIA_BUS_FMT_YUYV8_1X16, + .datatype = MIPI_CSI2_DT_YUV422_8B, + .bpp = 16, + }, { + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .datatype = MIPI_CSI2_DT_YUV422_8B, + .bpp = 16, + }, { + .code = MEDIA_BUS_FMT_YUYV10_2X10, + .datatype = MIPI_CSI2_DT_YUV422_8B, + .bpp = 20, + }, { + .code = MEDIA_BUS_FMT_Y10_1X10, + .datatype = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, { + .code = MEDIA_BUS_FMT_SBGGR8_1X8, + .datatype = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, { + .code = MEDIA_BUS_FMT_SGBRG8_1X8, + .datatype = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, { + .code = MEDIA_BUS_FMT_SGRBG8_1X8, + .datatype = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, { + .code = MEDIA_BUS_FMT_SRGGB8_1X8, + .datatype = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, { + .code = MEDIA_BUS_FMT_Y8_1X8, + .datatype = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, +}; + +static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(rcar_csi2_formats); i++) + if (rcar_csi2_formats[i].code == code) + return &rcar_csi2_formats[i]; + + return NULL; +} + +enum rcar_csi2_pads { + RCAR_CSI2_SINK, + RCAR_CSI2_SOURCE_VC0, + RCAR_CSI2_SOURCE_VC1, + RCAR_CSI2_SOURCE_VC2, + RCAR_CSI2_SOURCE_VC3, + NR_OF_RCAR_CSI2_PAD, +}; + +struct rcar_csi2_info { + int (*init_phtw)(struct rcar_csi2 *priv, unsigned int mbps); + int (*phy_post_init)(struct rcar_csi2 *priv); + const struct rcsi2_mbps_reg *hsfreqrange; + unsigned int csi0clkfreqrange; + unsigned int num_channels; + bool clear_ulps; + bool use_isp; +}; + +struct rcar_csi2 { + struct device *dev; + void __iomem *base; + const struct rcar_csi2_info *info; + struct reset_control *rstc; + + struct v4l2_subdev subdev; + struct media_pad pads[NR_OF_RCAR_CSI2_PAD]; + + struct v4l2_async_notifier notifier; + struct v4l2_subdev *remote; + unsigned int remote_pad; + + int channel_vc[4]; + + struct mutex lock; /* Protects mf and stream_count. */ + struct v4l2_mbus_framefmt mf; + int stream_count; + + unsigned short lanes; + unsigned char lane_swap[4]; +}; + +static inline struct rcar_csi2 *sd_to_csi2(struct v4l2_subdev *sd) +{ + return container_of(sd, struct rcar_csi2, subdev); +} + +static inline struct rcar_csi2 *notifier_to_csi2(struct v4l2_async_notifier *n) +{ + return container_of(n, struct rcar_csi2, notifier); +} + +static u32 rcsi2_read(struct rcar_csi2 *priv, unsigned int reg) +{ + return ioread32(priv->base + reg); +} + +static void rcsi2_write(struct rcar_csi2 *priv, unsigned int reg, u32 data) +{ + iowrite32(data, priv->base + reg); +} + +static void rcsi2_enter_standby(struct rcar_csi2 *priv) +{ + rcsi2_write(priv, PHYCNT_REG, 0); + rcsi2_write(priv, PHTC_REG, PHTC_TESTCLR); + reset_control_assert(priv->rstc); + usleep_range(100, 150); + pm_runtime_put(priv->dev); +} + +static int rcsi2_exit_standby(struct rcar_csi2 *priv) +{ + int ret; + + ret = pm_runtime_resume_and_get(priv->dev); + if (ret < 0) + return ret; + + reset_control_deassert(priv->rstc); + + return 0; +} + +static int rcsi2_wait_phy_start(struct rcar_csi2 *priv, + unsigned int lanes) +{ + unsigned int timeout; + + /* Wait for the clock and data lanes to enter LP-11 state. */ + for (timeout = 0; timeout <= 20; timeout++) { + const u32 lane_mask = (1 << lanes) - 1; + + if ((rcsi2_read(priv, PHCLM_REG) & PHCLM_STOPSTATECKL) && + (rcsi2_read(priv, PHDLM_REG) & lane_mask) == lane_mask) + return 0; + + usleep_range(1000, 2000); + } + + dev_err(priv->dev, "Timeout waiting for LP-11 state\n"); + + return -ETIMEDOUT; +} + +static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps) +{ + const struct rcsi2_mbps_reg *hsfreq; + const struct rcsi2_mbps_reg *hsfreq_prev = NULL; + + if (mbps < priv->info->hsfreqrange->mbps) + dev_warn(priv->dev, "%u Mbps less than min PHY speed %u Mbps", + mbps, priv->info->hsfreqrange->mbps); + + for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++) { + if (hsfreq->mbps >= mbps) + break; + hsfreq_prev = hsfreq; + } + + if (!hsfreq->mbps) { + dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps); + return -ERANGE; + } + + if (hsfreq_prev && + ((mbps - hsfreq_prev->mbps) <= (hsfreq->mbps - mbps))) + hsfreq = hsfreq_prev; + + rcsi2_write(priv, PHYPLL_REG, PHYPLL_HSFREQRANGE(hsfreq->reg)); + + return 0; +} + +static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp, + unsigned int lanes) +{ + struct v4l2_subdev *source; + struct v4l2_ctrl *ctrl; + u64 mbps; + + if (!priv->remote) + return -ENODEV; + + source = priv->remote; + + /* Read the pixel rate control from remote. */ + ctrl = v4l2_ctrl_find(source->ctrl_handler, V4L2_CID_PIXEL_RATE); + if (!ctrl) { + dev_err(priv->dev, "no pixel rate control in subdev %s\n", + source->name); + return -EINVAL; + } + + /* + * Calculate the phypll in mbps. + * link_freq = (pixel_rate * bits_per_sample) / (2 * nr_of_lanes) + * bps = link_freq * 2 + */ + mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * bpp; + do_div(mbps, lanes * 1000000); + + return mbps; +} + +static int rcsi2_get_active_lanes(struct rcar_csi2 *priv, + unsigned int *lanes) +{ + struct v4l2_mbus_config mbus_config = { 0 }; + int ret; + + *lanes = priv->lanes; + + ret = v4l2_subdev_call(priv->remote, pad, get_mbus_config, + priv->remote_pad, &mbus_config); + if (ret == -ENOIOCTLCMD) { + dev_dbg(priv->dev, "No remote mbus configuration available\n"); + return 0; + } + + if (ret) { + dev_err(priv->dev, "Failed to get remote mbus configuration\n"); + return ret; + } + + if (mbus_config.type != V4L2_MBUS_CSI2_DPHY) { + dev_err(priv->dev, "Unsupported media bus type %u\n", + mbus_config.type); + return -EINVAL; + } + + if (mbus_config.bus.mipi_csi2.num_data_lanes > priv->lanes) { + dev_err(priv->dev, + "Unsupported mbus config: too many data lanes %u\n", + mbus_config.bus.mipi_csi2.num_data_lanes); + return -EINVAL; + } + + *lanes = mbus_config.bus.mipi_csi2.num_data_lanes; + + return 0; +} + +static int rcsi2_start_receiver(struct rcar_csi2 *priv) +{ + const struct rcar_csi2_format *format; + u32 phycnt, vcdt = 0, vcdt2 = 0, fld = 0; + unsigned int lanes; + unsigned int i; + int mbps, ret; + + dev_dbg(priv->dev, "Input size (%ux%u%c)\n", + priv->mf.width, priv->mf.height, + priv->mf.field == V4L2_FIELD_NONE ? 'p' : 'i'); + + /* Code is validated in set_fmt. */ + format = rcsi2_code_to_fmt(priv->mf.code); + if (!format) + return -EINVAL; + + /* + * Enable all supported CSI-2 channels with virtual channel and + * data type matching. + * + * NOTE: It's not possible to get individual datatype for each + * source virtual channel. Once this is possible in V4L2 + * it should be used here. + */ + for (i = 0; i < priv->info->num_channels; i++) { + u32 vcdt_part; + + if (priv->channel_vc[i] < 0) + continue; + + vcdt_part = VCDT_SEL_VC(priv->channel_vc[i]) | VCDT_VCDTN_EN | + VCDT_SEL_DTN_ON | VCDT_SEL_DT(format->datatype); + + /* Store in correct reg and offset. */ + if (i < 2) + vcdt |= vcdt_part << ((i % 2) * 16); + else + vcdt2 |= vcdt_part << ((i % 2) * 16); + } + + if (priv->mf.field == V4L2_FIELD_ALTERNATE) { + fld = FLD_DET_SEL(1) | FLD_FLD_EN4 | FLD_FLD_EN3 | FLD_FLD_EN2 + | FLD_FLD_EN; + + if (priv->mf.height == 240) + fld |= FLD_FLD_NUM(0); + else + fld |= FLD_FLD_NUM(1); + } + + /* + * Get the number of active data lanes inspecting the remote mbus + * configuration. + */ + ret = rcsi2_get_active_lanes(priv, &lanes); + if (ret) + return ret; + + phycnt = PHYCNT_ENABLECLK; + phycnt |= (1 << lanes) - 1; + + mbps = rcsi2_calc_mbps(priv, format->bpp, lanes); + if (mbps < 0) + return mbps; + + /* Enable interrupts. */ + rcsi2_write(priv, INTEN_REG, INTEN_INT_AFIFO_OF | INTEN_INT_ERRSOTHS + | INTEN_INT_ERRSOTSYNCHS); + + /* Init */ + rcsi2_write(priv, TREF_REG, TREF_TREF); + rcsi2_write(priv, PHTC_REG, 0); + + /* Configure */ + if (!priv->info->use_isp) { + rcsi2_write(priv, VCDT_REG, vcdt); + if (vcdt2) + rcsi2_write(priv, VCDT2_REG, vcdt2); + } + + /* Lanes are zero indexed. */ + rcsi2_write(priv, LSWAP_REG, + LSWAP_L0SEL(priv->lane_swap[0] - 1) | + LSWAP_L1SEL(priv->lane_swap[1] - 1) | + LSWAP_L2SEL(priv->lane_swap[2] - 1) | + LSWAP_L3SEL(priv->lane_swap[3] - 1)); + + /* Start */ + if (priv->info->init_phtw) { + ret = priv->info->init_phtw(priv, mbps); + if (ret) + return ret; + } + + if (priv->info->hsfreqrange) { + ret = rcsi2_set_phypll(priv, mbps); + if (ret) + return ret; + } + + if (priv->info->csi0clkfreqrange) + rcsi2_write(priv, CSI0CLKFCPR_REG, + CSI0CLKFREQRANGE(priv->info->csi0clkfreqrange)); + + if (priv->info->use_isp) + rcsi2_write(priv, PHYFRX_REG, + PHYFRX_FORCERX_MODE_3 | PHYFRX_FORCERX_MODE_2 | + PHYFRX_FORCERX_MODE_1 | PHYFRX_FORCERX_MODE_0); + + rcsi2_write(priv, PHYCNT_REG, phycnt); + rcsi2_write(priv, LINKCNT_REG, LINKCNT_MONITOR_EN | + LINKCNT_REG_MONI_PACT_EN | LINKCNT_ICLK_NONSTOP); + rcsi2_write(priv, FLD_REG, fld); + rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ); + rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ); + + ret = rcsi2_wait_phy_start(priv, lanes); + if (ret) + return ret; + + if (priv->info->use_isp) + rcsi2_write(priv, PHYFRX_REG, 0); + + /* Run post PHY start initialization, if needed. */ + if (priv->info->phy_post_init) { + ret = priv->info->phy_post_init(priv); + if (ret) + return ret; + } + + /* Clear Ultra Low Power interrupt. */ + if (priv->info->clear_ulps) + rcsi2_write(priv, INTSTATE_REG, + INTSTATE_INT_ULPS_START | + INTSTATE_INT_ULPS_END); + return 0; +} + +static int rcsi2_start(struct rcar_csi2 *priv) +{ + int ret; + + ret = rcsi2_exit_standby(priv); + if (ret < 0) + return ret; + + ret = rcsi2_start_receiver(priv); + if (ret) { + rcsi2_enter_standby(priv); + return ret; + } + + ret = v4l2_subdev_call(priv->remote, video, s_stream, 1); + if (ret) { + rcsi2_enter_standby(priv); + return ret; + } + + return 0; +} + +static void rcsi2_stop(struct rcar_csi2 *priv) +{ + rcsi2_enter_standby(priv); + v4l2_subdev_call(priv->remote, video, s_stream, 0); +} + +static int rcsi2_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct rcar_csi2 *priv = sd_to_csi2(sd); + int ret = 0; + + mutex_lock(&priv->lock); + + if (!priv->remote) { + ret = -ENODEV; + goto out; + } + + if (enable && priv->stream_count == 0) { + ret = rcsi2_start(priv); + if (ret) + goto out; + } else if (!enable && priv->stream_count == 1) { + rcsi2_stop(priv); + } + + priv->stream_count += enable ? 1 : -1; +out: + mutex_unlock(&priv->lock); + + return ret; +} + +static int rcsi2_set_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct rcar_csi2 *priv = sd_to_csi2(sd); + struct v4l2_mbus_framefmt *framefmt; + + mutex_lock(&priv->lock); + + if (!rcsi2_code_to_fmt(format->format.code)) + format->format.code = rcar_csi2_formats[0].code; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + priv->mf = format->format; + } else { + framefmt = v4l2_subdev_get_try_format(sd, sd_state, 0); + *framefmt = format->format; + } + + mutex_unlock(&priv->lock); + + return 0; +} + +static int rcsi2_get_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct rcar_csi2 *priv = sd_to_csi2(sd); + + mutex_lock(&priv->lock); + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) + format->format = priv->mf; + else + format->format = *v4l2_subdev_get_try_format(sd, sd_state, 0); + + mutex_unlock(&priv->lock); + + return 0; +} + +static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = { + .s_stream = rcsi2_s_stream, +}; + +static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = { + .set_fmt = rcsi2_set_pad_format, + .get_fmt = rcsi2_get_pad_format, +}; + +static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = { + .video = &rcar_csi2_video_ops, + .pad = &rcar_csi2_pad_ops, +}; + +static irqreturn_t rcsi2_irq(int irq, void *data) +{ + struct rcar_csi2 *priv = data; + u32 status, err_status; + + status = rcsi2_read(priv, INTSTATE_REG); + err_status = rcsi2_read(priv, INTERRSTATE_REG); + + if (!status) + return IRQ_HANDLED; + + rcsi2_write(priv, INTSTATE_REG, status); + + if (!err_status) + return IRQ_HANDLED; + + rcsi2_write(priv, INTERRSTATE_REG, err_status); + + dev_info(priv->dev, "Transfer error, restarting CSI-2 receiver\n"); + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t rcsi2_irq_thread(int irq, void *data) +{ + struct rcar_csi2 *priv = data; + + mutex_lock(&priv->lock); + rcsi2_stop(priv); + usleep_range(1000, 2000); + if (rcsi2_start(priv)) + dev_warn(priv->dev, "Failed to restart CSI-2 receiver\n"); + mutex_unlock(&priv->lock); + + return IRQ_HANDLED; +} + +/* ----------------------------------------------------------------------------- + * Async handling and registration of subdevices and links. + */ + +static int rcsi2_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct rcar_csi2 *priv = notifier_to_csi2(notifier); + int pad; + + pad = media_entity_get_fwnode_pad(&subdev->entity, asd->match.fwnode, + MEDIA_PAD_FL_SOURCE); + if (pad < 0) { + dev_err(priv->dev, "Failed to find pad for %s\n", subdev->name); + return pad; + } + + priv->remote = subdev; + priv->remote_pad = pad; + + dev_dbg(priv->dev, "Bound %s pad: %d\n", subdev->name, pad); + + return media_create_pad_link(&subdev->entity, pad, + &priv->subdev.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); +} + +static void rcsi2_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct rcar_csi2 *priv = notifier_to_csi2(notifier); + + priv->remote = NULL; + + dev_dbg(priv->dev, "Unbind %s\n", subdev->name); +} + +static const struct v4l2_async_notifier_operations rcar_csi2_notify_ops = { + .bound = rcsi2_notify_bound, + .unbind = rcsi2_notify_unbind, +}; + +static int rcsi2_parse_v4l2(struct rcar_csi2 *priv, + struct v4l2_fwnode_endpoint *vep) +{ + unsigned int i; + + /* Only port 0 endpoint 0 is valid. */ + if (vep->base.port || vep->base.id) + return -ENOTCONN; + + if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) { + dev_err(priv->dev, "Unsupported bus: %u\n", vep->bus_type); + return -EINVAL; + } + + priv->lanes = vep->bus.mipi_csi2.num_data_lanes; + if (priv->lanes != 1 && priv->lanes != 2 && priv->lanes != 4) { + dev_err(priv->dev, "Unsupported number of data-lanes: %u\n", + priv->lanes); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(priv->lane_swap); i++) { + priv->lane_swap[i] = i < priv->lanes ? + vep->bus.mipi_csi2.data_lanes[i] : i; + + /* Check for valid lane number. */ + if (priv->lane_swap[i] < 1 || priv->lane_swap[i] > 4) { + dev_err(priv->dev, "data-lanes must be in 1-4 range\n"); + return -EINVAL; + } + } + + return 0; +} + +static int rcsi2_parse_dt(struct rcar_csi2 *priv) +{ + struct v4l2_async_subdev *asd; + struct fwnode_handle *fwnode; + struct fwnode_handle *ep; + struct v4l2_fwnode_endpoint v4l2_ep = { + .bus_type = V4L2_MBUS_CSI2_DPHY + }; + int ret; + + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(priv->dev), 0, 0, 0); + if (!ep) { + dev_err(priv->dev, "Not connected to subdevice\n"); + return -EINVAL; + } + + ret = v4l2_fwnode_endpoint_parse(ep, &v4l2_ep); + if (ret) { + dev_err(priv->dev, "Could not parse v4l2 endpoint\n"); + fwnode_handle_put(ep); + return -EINVAL; + } + + ret = rcsi2_parse_v4l2(priv, &v4l2_ep); + if (ret) { + fwnode_handle_put(ep); + return ret; + } + + fwnode = fwnode_graph_get_remote_endpoint(ep); + fwnode_handle_put(ep); + + dev_dbg(priv->dev, "Found '%pOF'\n", to_of_node(fwnode)); + + v4l2_async_nf_init(&priv->notifier); + priv->notifier.ops = &rcar_csi2_notify_ops; + + asd = v4l2_async_nf_add_fwnode(&priv->notifier, fwnode, + struct v4l2_async_subdev); + fwnode_handle_put(fwnode); + if (IS_ERR(asd)) + return PTR_ERR(asd); + + ret = v4l2_async_subdev_nf_register(&priv->subdev, &priv->notifier); + if (ret) + v4l2_async_nf_cleanup(&priv->notifier); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * PHTW initialization sequences. + * + * NOTE: Magic values are from the datasheet and lack documentation. + */ + +static int rcsi2_phtw_write(struct rcar_csi2 *priv, u16 data, u16 code) +{ + unsigned int timeout; + + rcsi2_write(priv, PHTW_REG, + PHTW_DWEN | PHTW_TESTDIN_DATA(data) | + PHTW_CWEN | PHTW_TESTDIN_CODE(code)); + + /* Wait for DWEN and CWEN to be cleared by hardware. */ + for (timeout = 0; timeout <= 20; timeout++) { + if (!(rcsi2_read(priv, PHTW_REG) & (PHTW_DWEN | PHTW_CWEN))) + return 0; + + usleep_range(1000, 2000); + } + + dev_err(priv->dev, "Timeout waiting for PHTW_DWEN and/or PHTW_CWEN\n"); + + return -ETIMEDOUT; +} + +static int rcsi2_phtw_write_array(struct rcar_csi2 *priv, + const struct phtw_value *values) +{ + const struct phtw_value *value; + int ret; + + for (value = values; value->data || value->code; value++) { + ret = rcsi2_phtw_write(priv, value->data, value->code); + if (ret) + return ret; + } + + return 0; +} + +static int rcsi2_phtw_write_mbps(struct rcar_csi2 *priv, unsigned int mbps, + const struct rcsi2_mbps_reg *values, u16 code) +{ + const struct rcsi2_mbps_reg *value; + const struct rcsi2_mbps_reg *prev_value = NULL; + + for (value = values; value->mbps; value++) { + if (value->mbps >= mbps) + break; + prev_value = value; + } + + if (prev_value && + ((mbps - prev_value->mbps) <= (value->mbps - mbps))) + value = prev_value; + + if (!value->mbps) { + dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps); + return -ERANGE; + } + + return rcsi2_phtw_write(priv, value->reg, code); +} + +static int __rcsi2_init_phtw_h3_v3h_m3n(struct rcar_csi2 *priv, + unsigned int mbps) +{ + static const struct phtw_value step1[] = { + { .data = 0xcc, .code = 0xe2 }, + { .data = 0x01, .code = 0xe3 }, + { .data = 0x11, .code = 0xe4 }, + { .data = 0x01, .code = 0xe5 }, + { .data = 0x10, .code = 0x04 }, + { /* sentinel */ }, + }; + + static const struct phtw_value step2[] = { + { .data = 0x38, .code = 0x08 }, + { .data = 0x01, .code = 0x00 }, + { .data = 0x4b, .code = 0xac }, + { .data = 0x03, .code = 0x00 }, + { .data = 0x80, .code = 0x07 }, + { /* sentinel */ }, + }; + + int ret; + + ret = rcsi2_phtw_write_array(priv, step1); + if (ret) + return ret; + + if (mbps != 0 && mbps <= 250) { + ret = rcsi2_phtw_write(priv, 0x39, 0x05); + if (ret) + return ret; + + ret = rcsi2_phtw_write_mbps(priv, mbps, phtw_mbps_h3_v3h_m3n, + 0xf1); + if (ret) + return ret; + } + + return rcsi2_phtw_write_array(priv, step2); +} + +static int rcsi2_init_phtw_h3_v3h_m3n(struct rcar_csi2 *priv, unsigned int mbps) +{ + return __rcsi2_init_phtw_h3_v3h_m3n(priv, mbps); +} + +static int rcsi2_init_phtw_h3es2(struct rcar_csi2 *priv, unsigned int mbps) +{ + return __rcsi2_init_phtw_h3_v3h_m3n(priv, 0); +} + +static int rcsi2_init_phtw_v3m_e3(struct rcar_csi2 *priv, unsigned int mbps) +{ + return rcsi2_phtw_write_mbps(priv, mbps, phtw_mbps_v3m_e3, 0x44); +} + +static int rcsi2_phy_post_init_v3m_e3(struct rcar_csi2 *priv) +{ + static const struct phtw_value step1[] = { + { .data = 0xee, .code = 0x34 }, + { .data = 0xee, .code = 0x44 }, + { .data = 0xee, .code = 0x54 }, + { .data = 0xee, .code = 0x84 }, + { .data = 0xee, .code = 0x94 }, + { /* sentinel */ }, + }; + + return rcsi2_phtw_write_array(priv, step1); +} + +static int rcsi2_init_phtw_v3u(struct rcar_csi2 *priv, + unsigned int mbps) +{ + /* In case of 1500Mbps or less */ + static const struct phtw_value step1[] = { + { .data = 0xcc, .code = 0xe2 }, + { /* sentinel */ }, + }; + + static const struct phtw_value step2[] = { + { .data = 0x01, .code = 0xe3 }, + { .data = 0x11, .code = 0xe4 }, + { .data = 0x01, .code = 0xe5 }, + { /* sentinel */ }, + }; + + /* In case of 1500Mbps or less */ + static const struct phtw_value step3[] = { + { .data = 0x38, .code = 0x08 }, + { /* sentinel */ }, + }; + + static const struct phtw_value step4[] = { + { .data = 0x01, .code = 0x00 }, + { .data = 0x4b, .code = 0xac }, + { .data = 0x03, .code = 0x00 }, + { .data = 0x80, .code = 0x07 }, + { /* sentinel */ }, + }; + + int ret; + + if (mbps != 0 && mbps <= 1500) + ret = rcsi2_phtw_write_array(priv, step1); + else + ret = rcsi2_phtw_write_mbps(priv, mbps, phtw_mbps_v3u, 0xe2); + if (ret) + return ret; + + ret = rcsi2_phtw_write_array(priv, step2); + if (ret) + return ret; + + if (mbps != 0 && mbps <= 1500) { + ret = rcsi2_phtw_write_array(priv, step3); + if (ret) + return ret; + } + + ret = rcsi2_phtw_write_array(priv, step4); + if (ret) + return ret; + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Platform Device Driver. + */ + +static int rcsi2_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct rcar_csi2 *priv = sd_to_csi2(sd); + struct video_device *vdev; + int channel, vc; + u32 id; + + if (!is_media_entity_v4l2_video_device(remote->entity)) { + dev_err(priv->dev, "Remote is not a video device\n"); + return -EINVAL; + } + + vdev = media_entity_to_video_device(remote->entity); + + if (of_property_read_u32(vdev->dev_parent->of_node, "renesas,id", &id)) { + dev_err(priv->dev, "No renesas,id, can't configure routing\n"); + return -EINVAL; + } + + channel = id % 4; + + if (flags & MEDIA_LNK_FL_ENABLED) { + if (media_pad_remote_pad_first(local)) { + dev_dbg(priv->dev, + "Each VC can only be routed to one output channel\n"); + return -EINVAL; + } + + vc = local->index - 1; + + dev_dbg(priv->dev, "Route VC%d to VIN%u on output channel %d\n", + vc, id, channel); + } else { + vc = -1; + } + + priv->channel_vc[channel] = vc; + + return 0; +} + +static const struct media_entity_operations rcar_csi2_entity_ops = { + .link_setup = rcsi2_link_setup, + .link_validate = v4l2_subdev_link_validate, +}; + +static int rcsi2_probe_resources(struct rcar_csi2 *priv, + struct platform_device *pdev) +{ + int irq, ret; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ret = devm_request_threaded_irq(&pdev->dev, irq, rcsi2_irq, + rcsi2_irq_thread, IRQF_SHARED, + KBUILD_MODNAME, priv); + if (ret) + return ret; + + priv->rstc = devm_reset_control_get(&pdev->dev, NULL); + + return PTR_ERR_OR_ZERO(priv->rstc); +} + +static const struct rcar_csi2_info rcar_csi2_info_r8a7795 = { + .init_phtw = rcsi2_init_phtw_h3_v3h_m3n, + .hsfreqrange = hsfreqrange_h3_v3h_m3n, + .csi0clkfreqrange = 0x20, + .num_channels = 4, + .clear_ulps = true, +}; + +static const struct rcar_csi2_info rcar_csi2_info_r8a7795es1 = { + .hsfreqrange = hsfreqrange_m3w_h3es1, + .num_channels = 4, +}; + +static const struct rcar_csi2_info rcar_csi2_info_r8a7795es2 = { + .init_phtw = rcsi2_init_phtw_h3es2, + .hsfreqrange = hsfreqrange_h3_v3h_m3n, + .csi0clkfreqrange = 0x20, + .num_channels = 4, + .clear_ulps = true, +}; + +static const struct rcar_csi2_info rcar_csi2_info_r8a7796 = { + .hsfreqrange = hsfreqrange_m3w_h3es1, + .num_channels = 4, +}; + +static const struct rcar_csi2_info rcar_csi2_info_r8a77961 = { + .hsfreqrange = hsfreqrange_m3w_h3es1, + .num_channels = 4, +}; + +static const struct rcar_csi2_info rcar_csi2_info_r8a77965 = { + .init_phtw = rcsi2_init_phtw_h3_v3h_m3n, + .hsfreqrange = hsfreqrange_h3_v3h_m3n, + .csi0clkfreqrange = 0x20, + .num_channels = 4, + .clear_ulps = true, +}; + +static const struct rcar_csi2_info rcar_csi2_info_r8a77970 = { + .init_phtw = rcsi2_init_phtw_v3m_e3, + .phy_post_init = rcsi2_phy_post_init_v3m_e3, + .num_channels = 4, +}; + +static const struct rcar_csi2_info rcar_csi2_info_r8a77980 = { + .init_phtw = rcsi2_init_phtw_h3_v3h_m3n, + .hsfreqrange = hsfreqrange_h3_v3h_m3n, + .csi0clkfreqrange = 0x20, + .clear_ulps = true, +}; + +static const struct rcar_csi2_info rcar_csi2_info_r8a77990 = { + .init_phtw = rcsi2_init_phtw_v3m_e3, + .phy_post_init = rcsi2_phy_post_init_v3m_e3, + .num_channels = 2, +}; + +static const struct rcar_csi2_info rcar_csi2_info_r8a779a0 = { + .init_phtw = rcsi2_init_phtw_v3u, + .hsfreqrange = hsfreqrange_v3u, + .csi0clkfreqrange = 0x20, + .clear_ulps = true, + .use_isp = true, +}; + +static const struct of_device_id rcar_csi2_of_table[] = { + { + .compatible = "renesas,r8a774a1-csi2", + .data = &rcar_csi2_info_r8a7796, + }, + { + .compatible = "renesas,r8a774b1-csi2", + .data = &rcar_csi2_info_r8a77965, + }, + { + .compatible = "renesas,r8a774c0-csi2", + .data = &rcar_csi2_info_r8a77990, + }, + { + .compatible = "renesas,r8a774e1-csi2", + .data = &rcar_csi2_info_r8a7795, + }, + { + .compatible = "renesas,r8a7795-csi2", + .data = &rcar_csi2_info_r8a7795, + }, + { + .compatible = "renesas,r8a7796-csi2", + .data = &rcar_csi2_info_r8a7796, + }, + { + .compatible = "renesas,r8a77961-csi2", + .data = &rcar_csi2_info_r8a77961, + }, + { + .compatible = "renesas,r8a77965-csi2", + .data = &rcar_csi2_info_r8a77965, + }, + { + .compatible = "renesas,r8a77970-csi2", + .data = &rcar_csi2_info_r8a77970, + }, + { + .compatible = "renesas,r8a77980-csi2", + .data = &rcar_csi2_info_r8a77980, + }, + { + .compatible = "renesas,r8a77990-csi2", + .data = &rcar_csi2_info_r8a77990, + }, + { + .compatible = "renesas,r8a779a0-csi2", + .data = &rcar_csi2_info_r8a779a0, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, rcar_csi2_of_table); + +static const struct soc_device_attribute r8a7795[] = { + { + .soc_id = "r8a7795", .revision = "ES1.*", + .data = &rcar_csi2_info_r8a7795es1, + }, + { + .soc_id = "r8a7795", .revision = "ES2.*", + .data = &rcar_csi2_info_r8a7795es2, + }, + { /* sentinel */ } +}; + +static int rcsi2_probe(struct platform_device *pdev) +{ + const struct soc_device_attribute *attr; + struct rcar_csi2 *priv; + unsigned int i, num_pads; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->info = of_device_get_match_data(&pdev->dev); + + /* + * The different ES versions of r8a7795 (H3) behave differently but + * share the same compatible string. + */ + attr = soc_device_match(r8a7795); + if (attr) + priv->info = attr->data; + + priv->dev = &pdev->dev; + + mutex_init(&priv->lock); + priv->stream_count = 0; + + ret = rcsi2_probe_resources(priv, pdev); + if (ret) { + dev_err(priv->dev, "Failed to get resources\n"); + goto error_mutex; + } + + platform_set_drvdata(pdev, priv); + + ret = rcsi2_parse_dt(priv); + if (ret) + goto error_mutex; + + priv->subdev.owner = THIS_MODULE; + priv->subdev.dev = &pdev->dev; + v4l2_subdev_init(&priv->subdev, &rcar_csi2_subdev_ops); + v4l2_set_subdevdata(&priv->subdev, &pdev->dev); + snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s %s", + KBUILD_MODNAME, dev_name(&pdev->dev)); + priv->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE; + + priv->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER; + priv->subdev.entity.ops = &rcar_csi2_entity_ops; + + num_pads = priv->info->use_isp ? 2 : NR_OF_RCAR_CSI2_PAD; + + priv->pads[RCAR_CSI2_SINK].flags = MEDIA_PAD_FL_SINK; + for (i = RCAR_CSI2_SOURCE_VC0; i < num_pads; i++) + priv->pads[i].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&priv->subdev.entity, num_pads, + priv->pads); + if (ret) + goto error_async; + + for (i = 0; i < ARRAY_SIZE(priv->channel_vc); i++) + priv->channel_vc[i] = -1; + + pm_runtime_enable(&pdev->dev); + + ret = v4l2_async_register_subdev(&priv->subdev); + if (ret < 0) + goto error_async; + + dev_info(priv->dev, "%d lanes found\n", priv->lanes); + + return 0; + +error_async: + v4l2_async_nf_unregister(&priv->notifier); + v4l2_async_nf_cleanup(&priv->notifier); +error_mutex: + mutex_destroy(&priv->lock); + + return ret; +} + +static int rcsi2_remove(struct platform_device *pdev) +{ + struct rcar_csi2 *priv = platform_get_drvdata(pdev); + + v4l2_async_nf_unregister(&priv->notifier); + v4l2_async_nf_cleanup(&priv->notifier); + v4l2_async_unregister_subdev(&priv->subdev); + + pm_runtime_disable(&pdev->dev); + + mutex_destroy(&priv->lock); + + return 0; +} + +static struct platform_driver rcar_csi2_pdrv = { + .remove = rcsi2_remove, + .probe = rcsi2_probe, + .driver = { + .name = "rcar-csi2", + .suppress_bind_attrs = true, + .of_match_table = rcar_csi2_of_table, + }, +}; + +module_platform_driver(rcar_csi2_pdrv); + +MODULE_AUTHOR("Niklas Söderlund <niklas.soderlund@ragnatech.se>"); +MODULE_DESCRIPTION("Renesas R-Car MIPI CSI-2 receiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c new file mode 100644 index 000000000..ef5adffae --- /dev/null +++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c @@ -0,0 +1,1577 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Renesas R-Car VIN + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2011-2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com> + * Copyright (C) 2008 Magnus Damm + * + * Based on the soc-camera rcar_vin driver + */ + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/pm_runtime.h> + +#include <media/videobuf2-dma-contig.h> + +#include "rcar-vin.h" + +/* ----------------------------------------------------------------------------- + * HW Functions + */ + +/* Register offsets for R-Car VIN */ +#define VNMC_REG 0x00 /* Video n Main Control Register */ +#define VNMS_REG 0x04 /* Video n Module Status Register */ +#define VNFC_REG 0x08 /* Video n Frame Capture Register */ +#define VNSLPRC_REG 0x0C /* Video n Start Line Pre-Clip Register */ +#define VNELPRC_REG 0x10 /* Video n End Line Pre-Clip Register */ +#define VNSPPRC_REG 0x14 /* Video n Start Pixel Pre-Clip Register */ +#define VNEPPRC_REG 0x18 /* Video n End Pixel Pre-Clip Register */ +#define VNIS_REG 0x2C /* Video n Image Stride Register */ +#define VNMB_REG(m) (0x30 + ((m) << 2)) /* Video n Memory Base m Register */ +#define VNIE_REG 0x40 /* Video n Interrupt Enable Register */ +#define VNINTS_REG 0x44 /* Video n Interrupt Status Register */ +#define VNSI_REG 0x48 /* Video n Scanline Interrupt Register */ +#define VNMTC_REG 0x4C /* Video n Memory Transfer Control Register */ +#define VNDMR_REG 0x58 /* Video n Data Mode Register */ +#define VNDMR2_REG 0x5C /* Video n Data Mode Register 2 */ +#define VNUVAOF_REG 0x60 /* Video n UV Address Offset Register */ + +/* Register offsets specific for Gen2 */ +#define VNSLPOC_REG 0x1C /* Video n Start Line Post-Clip Register */ +#define VNELPOC_REG 0x20 /* Video n End Line Post-Clip Register */ +#define VNSPPOC_REG 0x24 /* Video n Start Pixel Post-Clip Register */ +#define VNEPPOC_REG 0x28 /* Video n End Pixel Post-Clip Register */ +#define VNYS_REG 0x50 /* Video n Y Scale Register */ +#define VNXS_REG 0x54 /* Video n X Scale Register */ +#define VNC1A_REG 0x80 /* Video n Coefficient Set C1A Register */ +#define VNC1B_REG 0x84 /* Video n Coefficient Set C1B Register */ +#define VNC1C_REG 0x88 /* Video n Coefficient Set C1C Register */ +#define VNC2A_REG 0x90 /* Video n Coefficient Set C2A Register */ +#define VNC2B_REG 0x94 /* Video n Coefficient Set C2B Register */ +#define VNC2C_REG 0x98 /* Video n Coefficient Set C2C Register */ +#define VNC3A_REG 0xA0 /* Video n Coefficient Set C3A Register */ +#define VNC3B_REG 0xA4 /* Video n Coefficient Set C3B Register */ +#define VNC3C_REG 0xA8 /* Video n Coefficient Set C3C Register */ +#define VNC4A_REG 0xB0 /* Video n Coefficient Set C4A Register */ +#define VNC4B_REG 0xB4 /* Video n Coefficient Set C4B Register */ +#define VNC4C_REG 0xB8 /* Video n Coefficient Set C4C Register */ +#define VNC5A_REG 0xC0 /* Video n Coefficient Set C5A Register */ +#define VNC5B_REG 0xC4 /* Video n Coefficient Set C5B Register */ +#define VNC5C_REG 0xC8 /* Video n Coefficient Set C5C Register */ +#define VNC6A_REG 0xD0 /* Video n Coefficient Set C6A Register */ +#define VNC6B_REG 0xD4 /* Video n Coefficient Set C6B Register */ +#define VNC6C_REG 0xD8 /* Video n Coefficient Set C6C Register */ +#define VNC7A_REG 0xE0 /* Video n Coefficient Set C7A Register */ +#define VNC7B_REG 0xE4 /* Video n Coefficient Set C7B Register */ +#define VNC7C_REG 0xE8 /* Video n Coefficient Set C7C Register */ +#define VNC8A_REG 0xF0 /* Video n Coefficient Set C8A Register */ +#define VNC8B_REG 0xF4 /* Video n Coefficient Set C8B Register */ +#define VNC8C_REG 0xF8 /* Video n Coefficient Set C8C Register */ + +/* Register offsets specific for Gen3 */ +#define VNCSI_IFMD_REG 0x20 /* Video n CSI2 Interface Mode Register */ + +/* Register bit fields for R-Car VIN */ +/* Video n Main Control Register bits */ +#define VNMC_INF_MASK (7 << 16) +#define VNMC_DPINE (1 << 27) /* Gen3 specific */ +#define VNMC_SCLE (1 << 26) /* Gen3 specific */ +#define VNMC_FOC (1 << 21) +#define VNMC_YCAL (1 << 19) +#define VNMC_INF_YUV8_BT656 (0 << 16) +#define VNMC_INF_YUV8_BT601 (1 << 16) +#define VNMC_INF_YUV10_BT656 (2 << 16) +#define VNMC_INF_YUV10_BT601 (3 << 16) +#define VNMC_INF_RAW8 (4 << 16) +#define VNMC_INF_YUV16 (5 << 16) +#define VNMC_INF_RGB888 (6 << 16) +#define VNMC_INF_RGB666 (7 << 16) +#define VNMC_VUP (1 << 10) +#define VNMC_IM_ODD (0 << 3) +#define VNMC_IM_ODD_EVEN (1 << 3) +#define VNMC_IM_EVEN (2 << 3) +#define VNMC_IM_FULL (3 << 3) +#define VNMC_BPS (1 << 1) +#define VNMC_ME (1 << 0) + +/* Video n Module Status Register bits */ +#define VNMS_FBS_MASK (3 << 3) +#define VNMS_FBS_SHIFT 3 +#define VNMS_FS (1 << 2) +#define VNMS_AV (1 << 1) +#define VNMS_CA (1 << 0) + +/* Video n Frame Capture Register bits */ +#define VNFC_C_FRAME (1 << 1) +#define VNFC_S_FRAME (1 << 0) + +/* Video n Interrupt Enable Register bits */ +#define VNIE_FIE (1 << 4) +#define VNIE_EFE (1 << 1) + +/* Video n Interrupt Status Register bits */ +#define VNINTS_FIS (1 << 4) + +/* Video n Data Mode Register bits */ +#define VNDMR_A8BIT(n) (((n) & 0xff) << 24) +#define VNDMR_A8BIT_MASK (0xff << 24) +#define VNDMR_YMODE_Y8 (1 << 12) +#define VNDMR_EXRGB (1 << 8) +#define VNDMR_BPSM (1 << 4) +#define VNDMR_ABIT (1 << 2) +#define VNDMR_DTMD_YCSEP (1 << 1) +#define VNDMR_DTMD_ARGB (1 << 0) +#define VNDMR_DTMD_YCSEP_420 (3 << 0) + +/* Video n Data Mode Register 2 bits */ +#define VNDMR2_VPS (1 << 30) +#define VNDMR2_HPS (1 << 29) +#define VNDMR2_CES (1 << 28) +#define VNDMR2_YDS (1 << 22) +#define VNDMR2_FTEV (1 << 17) +#define VNDMR2_VLV(n) ((n & 0xf) << 12) + +/* Video n CSI2 Interface Mode Register (Gen3) */ +#define VNCSI_IFMD_DES1 (1 << 26) +#define VNCSI_IFMD_DES0 (1 << 25) +#define VNCSI_IFMD_CSI_CHSEL(n) (((n) & 0xf) << 0) + +struct rvin_buffer { + struct vb2_v4l2_buffer vb; + struct list_head list; +}; + +#define to_buf_list(vb2_buffer) (&container_of(vb2_buffer, \ + struct rvin_buffer, \ + vb)->list) + +static void rvin_write(struct rvin_dev *vin, u32 value, u32 offset) +{ + iowrite32(value, vin->base + offset); +} + +static u32 rvin_read(struct rvin_dev *vin, u32 offset) +{ + return ioread32(vin->base + offset); +} + +/* ----------------------------------------------------------------------------- + * Crop and Scaling Gen2 + */ + +struct vin_coeff { + unsigned short xs_value; + u32 coeff_set[24]; +}; + +static const struct vin_coeff vin_coeff_set[] = { + { 0x0000, { + 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000 }, + }, + { 0x1000, { + 0x000fa400, 0x000fa400, 0x09625902, + 0x000003f8, 0x00000403, 0x3de0d9f0, + 0x001fffed, 0x00000804, 0x3cc1f9c3, + 0x001003de, 0x00000c01, 0x3cb34d7f, + 0x002003d2, 0x00000c00, 0x3d24a92d, + 0x00200bca, 0x00000bff, 0x3df600d2, + 0x002013cc, 0x000007ff, 0x3ed70c7e, + 0x00100fde, 0x00000000, 0x3f87c036 }, + }, + { 0x1200, { + 0x002ffff1, 0x002ffff1, 0x02a0a9c8, + 0x002003e7, 0x001ffffa, 0x000185bc, + 0x002007dc, 0x000003ff, 0x3e52859c, + 0x00200bd4, 0x00000002, 0x3d53996b, + 0x00100fd0, 0x00000403, 0x3d04ad2d, + 0x00000bd5, 0x00000403, 0x3d35ace7, + 0x3ff003e4, 0x00000801, 0x3dc674a1, + 0x3fffe800, 0x00000800, 0x3e76f461 }, + }, + { 0x1400, { + 0x00100be3, 0x00100be3, 0x04d1359a, + 0x00000fdb, 0x002003ed, 0x0211fd93, + 0x00000fd6, 0x002003f4, 0x0002d97b, + 0x000007d6, 0x002ffffb, 0x3e93b956, + 0x3ff003da, 0x001003ff, 0x3db49926, + 0x3fffefe9, 0x00100001, 0x3d655cee, + 0x3fffd400, 0x00000003, 0x3d65f4b6, + 0x000fb421, 0x00000402, 0x3dc6547e }, + }, + { 0x1600, { + 0x00000bdd, 0x00000bdd, 0x06519578, + 0x3ff007da, 0x00000be3, 0x03c24973, + 0x3ff003d9, 0x00000be9, 0x01b30d5f, + 0x3ffff7df, 0x001003f1, 0x0003c542, + 0x000fdfec, 0x001003f7, 0x3ec4711d, + 0x000fc400, 0x002ffffd, 0x3df504f1, + 0x001fa81a, 0x002ffc00, 0x3d957cc2, + 0x002f8c3c, 0x00100000, 0x3db5c891 }, + }, + { 0x1800, { + 0x3ff003dc, 0x3ff003dc, 0x0791e558, + 0x000ff7dd, 0x3ff007de, 0x05328554, + 0x000fe7e3, 0x3ff00be2, 0x03232546, + 0x000fd7ee, 0x000007e9, 0x0143bd30, + 0x001fb800, 0x000007ee, 0x00044511, + 0x002fa015, 0x000007f4, 0x3ef4bcee, + 0x002f8832, 0x001003f9, 0x3e4514c7, + 0x001f7853, 0x001003fd, 0x3de54c9f }, + }, + { 0x1a00, { + 0x000fefe0, 0x000fefe0, 0x08721d3c, + 0x001fdbe7, 0x000ffbde, 0x0652a139, + 0x001fcbf0, 0x000003df, 0x0463292e, + 0x002fb3ff, 0x3ff007e3, 0x0293a91d, + 0x002f9c12, 0x3ff00be7, 0x01241905, + 0x001f8c29, 0x000007ed, 0x3fe470eb, + 0x000f7c46, 0x000007f2, 0x3f04b8ca, + 0x3fef7865, 0x000007f6, 0x3e74e4a8 }, + }, + { 0x1c00, { + 0x001fd3e9, 0x001fd3e9, 0x08f23d26, + 0x002fbff3, 0x001fe3e4, 0x0712ad23, + 0x002fa800, 0x000ff3e0, 0x05631d1b, + 0x001f9810, 0x000ffbe1, 0x03b3890d, + 0x000f8c23, 0x000003e3, 0x0233e8fa, + 0x3fef843b, 0x000003e7, 0x00f430e4, + 0x3fbf8456, 0x3ff00bea, 0x00046cc8, + 0x3f8f8c72, 0x3ff00bef, 0x3f3490ac }, + }, + { 0x1e00, { + 0x001fbbf4, 0x001fbbf4, 0x09425112, + 0x001fa800, 0x002fc7ed, 0x0792b110, + 0x000f980e, 0x001fdbe6, 0x0613110a, + 0x3fff8c20, 0x001fe7e3, 0x04a368fd, + 0x3fcf8c33, 0x000ff7e2, 0x0343b8ed, + 0x3f9f8c4a, 0x000fffe3, 0x0203f8da, + 0x3f5f9c61, 0x000003e6, 0x00e428c5, + 0x3f1fb07b, 0x000003eb, 0x3fe440af }, + }, + { 0x2000, { + 0x000fa400, 0x000fa400, 0x09625902, + 0x3fff980c, 0x001fb7f5, 0x0812b0ff, + 0x3fdf901c, 0x001fc7ed, 0x06b2fcfa, + 0x3faf902d, 0x001fd3e8, 0x055348f1, + 0x3f7f983f, 0x001fe3e5, 0x04038ce3, + 0x3f3fa454, 0x001fefe3, 0x02e3c8d1, + 0x3f0fb86a, 0x001ff7e4, 0x01c3e8c0, + 0x3ecfd880, 0x000fffe6, 0x00c404ac }, + }, + { 0x2200, { + 0x3fdf9c0b, 0x3fdf9c0b, 0x09725cf4, + 0x3fbf9818, 0x3fffa400, 0x0842a8f1, + 0x3f8f9827, 0x000fb3f7, 0x0702f0ec, + 0x3f5fa037, 0x000fc3ef, 0x05d330e4, + 0x3f2fac49, 0x001fcfea, 0x04a364d9, + 0x3effc05c, 0x001fdbe7, 0x038394ca, + 0x3ecfdc6f, 0x001fe7e6, 0x0273b0bb, + 0x3ea00083, 0x001fefe6, 0x0183c0a9 }, + }, + { 0x2400, { + 0x3f9fa014, 0x3f9fa014, 0x098260e6, + 0x3f7f9c23, 0x3fcf9c0a, 0x08629ce5, + 0x3f4fa431, 0x3fefa400, 0x0742d8e1, + 0x3f1fb440, 0x3fffb3f8, 0x062310d9, + 0x3eefc850, 0x000fbbf2, 0x050340d0, + 0x3ecfe062, 0x000fcbec, 0x041364c2, + 0x3ea00073, 0x001fd3ea, 0x03037cb5, + 0x3e902086, 0x001fdfe8, 0x022388a5 }, + }, + { 0x2600, { + 0x3f5fa81e, 0x3f5fa81e, 0x096258da, + 0x3f3fac2b, 0x3f8fa412, 0x088290d8, + 0x3f0fbc38, 0x3fafa408, 0x0772c8d5, + 0x3eefcc47, 0x3fcfa800, 0x0672f4ce, + 0x3ecfe456, 0x3fefaffa, 0x05531cc6, + 0x3eb00066, 0x3fffbbf3, 0x047334bb, + 0x3ea01c77, 0x000fc7ee, 0x039348ae, + 0x3ea04486, 0x000fd3eb, 0x02b350a1 }, + }, + { 0x2800, { + 0x3f2fb426, 0x3f2fb426, 0x094250ce, + 0x3f0fc032, 0x3f4fac1b, 0x086284cd, + 0x3eefd040, 0x3f7fa811, 0x0782acc9, + 0x3ecfe84c, 0x3f9fa807, 0x06a2d8c4, + 0x3eb0005b, 0x3fbfac00, 0x05b2f4bc, + 0x3eb0186a, 0x3fdfb3fa, 0x04c308b4, + 0x3eb04077, 0x3fefbbf4, 0x03f31ca8, + 0x3ec06884, 0x000fbff2, 0x03031c9e }, + }, + { 0x2a00, { + 0x3f0fc42d, 0x3f0fc42d, 0x090240c4, + 0x3eefd439, 0x3f2fb822, 0x08526cc2, + 0x3edfe845, 0x3f4fb018, 0x078294bf, + 0x3ec00051, 0x3f6fac0f, 0x06b2b4bb, + 0x3ec0185f, 0x3f8fac07, 0x05e2ccb4, + 0x3ec0386b, 0x3fafac00, 0x0502e8ac, + 0x3ed05c77, 0x3fcfb3fb, 0x0432f0a3, + 0x3ef08482, 0x3fdfbbf6, 0x0372f898 }, + }, + { 0x2c00, { + 0x3eefdc31, 0x3eefdc31, 0x08e238b8, + 0x3edfec3d, 0x3f0fc828, 0x082258b9, + 0x3ed00049, 0x3f1fc01e, 0x077278b6, + 0x3ed01455, 0x3f3fb815, 0x06c294b2, + 0x3ed03460, 0x3f5fb40d, 0x0602acac, + 0x3ef0506c, 0x3f7fb006, 0x0542c0a4, + 0x3f107476, 0x3f9fb400, 0x0472c89d, + 0x3f309c80, 0x3fbfb7fc, 0x03b2cc94 }, + }, + { 0x2e00, { + 0x3eefec37, 0x3eefec37, 0x088220b0, + 0x3ee00041, 0x3effdc2d, 0x07f244ae, + 0x3ee0144c, 0x3f0fd023, 0x07625cad, + 0x3ef02c57, 0x3f1fc81a, 0x06c274a9, + 0x3f004861, 0x3f3fbc13, 0x060288a6, + 0x3f20686b, 0x3f5fb80c, 0x05529c9e, + 0x3f408c74, 0x3f6fb805, 0x04b2ac96, + 0x3f80ac7e, 0x3f8fb800, 0x0402ac8e }, + }, + { 0x3000, { + 0x3ef0003a, 0x3ef0003a, 0x084210a6, + 0x3ef01045, 0x3effec32, 0x07b228a7, + 0x3f00284e, 0x3f0fdc29, 0x073244a4, + 0x3f104058, 0x3f0fd420, 0x06a258a2, + 0x3f305c62, 0x3f2fc818, 0x0612689d, + 0x3f508069, 0x3f3fc011, 0x05728496, + 0x3f80a072, 0x3f4fc00a, 0x04d28c90, + 0x3fc0c07b, 0x3f6fbc04, 0x04429088 }, + }, + { 0x3200, { + 0x3f00103e, 0x3f00103e, 0x07f1fc9e, + 0x3f102447, 0x3f000035, 0x0782149d, + 0x3f203c4f, 0x3f0ff02c, 0x07122c9c, + 0x3f405458, 0x3f0fe424, 0x06924099, + 0x3f607061, 0x3f1fd41d, 0x06024c97, + 0x3f909068, 0x3f2fcc16, 0x05726490, + 0x3fc0b070, 0x3f3fc80f, 0x04f26c8a, + 0x0000d077, 0x3f4fc409, 0x04627484 }, + }, + { 0x3400, { + 0x3f202040, 0x3f202040, 0x07a1e898, + 0x3f303449, 0x3f100c38, 0x0741fc98, + 0x3f504c50, 0x3f10002f, 0x06e21495, + 0x3f706459, 0x3f1ff028, 0x06722492, + 0x3fa08060, 0x3f1fe421, 0x05f2348f, + 0x3fd09c67, 0x3f1fdc19, 0x05824c89, + 0x0000bc6e, 0x3f2fd014, 0x04f25086, + 0x0040dc74, 0x3f3fcc0d, 0x04825c7f }, + }, + { 0x3600, { + 0x3f403042, 0x3f403042, 0x0761d890, + 0x3f504848, 0x3f301c3b, 0x0701f090, + 0x3f805c50, 0x3f200c33, 0x06a2008f, + 0x3fa07458, 0x3f10002b, 0x06520c8d, + 0x3fd0905e, 0x3f1ff424, 0x05e22089, + 0x0000ac65, 0x3f1fe81d, 0x05823483, + 0x0030cc6a, 0x3f2fdc18, 0x04f23c81, + 0x0080e871, 0x3f2fd412, 0x0482407c }, + }, + { 0x3800, { + 0x3f604043, 0x3f604043, 0x0721c88a, + 0x3f80544a, 0x3f502c3c, 0x06d1d88a, + 0x3fb06851, 0x3f301c35, 0x0681e889, + 0x3fd08456, 0x3f30082f, 0x0611fc88, + 0x00009c5d, 0x3f200027, 0x05d20884, + 0x0030b863, 0x3f2ff421, 0x05621880, + 0x0070d468, 0x3f2fe81b, 0x0502247c, + 0x00c0ec6f, 0x3f2fe015, 0x04a22877 }, + }, + { 0x3a00, { + 0x3f904c44, 0x3f904c44, 0x06e1b884, + 0x3fb0604a, 0x3f70383e, 0x0691c885, + 0x3fe07451, 0x3f502c36, 0x0661d483, + 0x00009055, 0x3f401831, 0x0601ec81, + 0x0030a85b, 0x3f300c2a, 0x05b1f480, + 0x0070c061, 0x3f300024, 0x0562047a, + 0x00b0d867, 0x3f3ff41e, 0x05020c77, + 0x00f0f46b, 0x3f2fec19, 0x04a21474 }, + }, + { 0x3c00, { + 0x3fb05c43, 0x3fb05c43, 0x06c1b07e, + 0x3fe06c4b, 0x3f902c3f, 0x0681c081, + 0x0000844f, 0x3f703838, 0x0631cc7d, + 0x00309855, 0x3f602433, 0x05d1d47e, + 0x0060b459, 0x3f50142e, 0x0581e47b, + 0x00a0c85f, 0x3f400828, 0x0531f078, + 0x00e0e064, 0x3f300021, 0x0501fc73, + 0x00b0fc6a, 0x3f3ff41d, 0x04a20873 }, + }, + { 0x3e00, { + 0x3fe06444, 0x3fe06444, 0x0681a07a, + 0x00007849, 0x3fc0503f, 0x0641b07a, + 0x0020904d, 0x3fa0403a, 0x05f1c07a, + 0x0060a453, 0x3f803034, 0x05c1c878, + 0x0090b858, 0x3f70202f, 0x0571d477, + 0x00d0d05d, 0x3f501829, 0x0531e073, + 0x0110e462, 0x3f500825, 0x04e1e471, + 0x01510065, 0x3f40001f, 0x04a1f06d }, + }, + { 0x4000, { + 0x00007044, 0x00007044, 0x06519476, + 0x00208448, 0x3fe05c3f, 0x0621a476, + 0x0050984d, 0x3fc04c3a, 0x05e1b075, + 0x0080ac52, 0x3fa03c35, 0x05a1b875, + 0x00c0c056, 0x3f803030, 0x0561c473, + 0x0100d45b, 0x3f70202b, 0x0521d46f, + 0x0140e860, 0x3f601427, 0x04d1d46e, + 0x01810064, 0x3f500822, 0x0491dc6b }, + }, + { 0x5000, { + 0x0110a442, 0x0110a442, 0x0551545e, + 0x0140b045, 0x00e0983f, 0x0531585f, + 0x0160c047, 0x00c08c3c, 0x0511645e, + 0x0190cc4a, 0x00908039, 0x04f1685f, + 0x01c0dc4c, 0x00707436, 0x04d1705e, + 0x0200e850, 0x00506833, 0x04b1785b, + 0x0230f453, 0x00305c30, 0x0491805a, + 0x02710056, 0x0010542d, 0x04718059 }, + }, + { 0x6000, { + 0x01c0bc40, 0x01c0bc40, 0x04c13052, + 0x01e0c841, 0x01a0b43d, 0x04c13851, + 0x0210cc44, 0x0180a83c, 0x04a13453, + 0x0230d845, 0x0160a03a, 0x04913c52, + 0x0260e047, 0x01409838, 0x04714052, + 0x0280ec49, 0x01208c37, 0x04514c50, + 0x02b0f44b, 0x01008435, 0x04414c50, + 0x02d1004c, 0x00e07c33, 0x0431544f }, + }, + { 0x7000, { + 0x0230c83e, 0x0230c83e, 0x04711c4c, + 0x0250d03f, 0x0210c43c, 0x0471204b, + 0x0270d840, 0x0200b83c, 0x0451244b, + 0x0290dc42, 0x01e0b43a, 0x0441244c, + 0x02b0e443, 0x01c0b038, 0x0441284b, + 0x02d0ec44, 0x01b0a438, 0x0421304a, + 0x02f0f445, 0x0190a036, 0x04213449, + 0x0310f847, 0x01709c34, 0x04213848 }, + }, + { 0x8000, { + 0x0280d03d, 0x0280d03d, 0x04310c48, + 0x02a0d43e, 0x0270c83c, 0x04311047, + 0x02b0dc3e, 0x0250c83a, 0x04311447, + 0x02d0e040, 0x0240c03a, 0x04211446, + 0x02e0e840, 0x0220bc39, 0x04111847, + 0x0300e842, 0x0210b438, 0x04012445, + 0x0310f043, 0x0200b037, 0x04012045, + 0x0330f444, 0x01e0ac36, 0x03f12445 }, + }, + { 0xefff, { + 0x0340dc3a, 0x0340dc3a, 0x03b0ec40, + 0x0340e03a, 0x0330e039, 0x03c0f03e, + 0x0350e03b, 0x0330dc39, 0x03c0ec3e, + 0x0350e43a, 0x0320dc38, 0x03c0f43e, + 0x0360e43b, 0x0320d839, 0x03b0f03e, + 0x0360e83b, 0x0310d838, 0x03c0fc3b, + 0x0370e83b, 0x0310d439, 0x03a0f83d, + 0x0370e83c, 0x0300d438, 0x03b0fc3c }, + } +}; + +static void rvin_set_coeff(struct rvin_dev *vin, unsigned short xs) +{ + int i; + const struct vin_coeff *p_prev_set = NULL; + const struct vin_coeff *p_set = NULL; + + /* Look for suitable coefficient values */ + for (i = 0; i < ARRAY_SIZE(vin_coeff_set); i++) { + p_prev_set = p_set; + p_set = &vin_coeff_set[i]; + + if (xs < p_set->xs_value) + break; + } + + /* Use previous value if its XS value is closer */ + if (p_prev_set && + xs - p_prev_set->xs_value < p_set->xs_value - xs) + p_set = p_prev_set; + + /* Set coefficient registers */ + rvin_write(vin, p_set->coeff_set[0], VNC1A_REG); + rvin_write(vin, p_set->coeff_set[1], VNC1B_REG); + rvin_write(vin, p_set->coeff_set[2], VNC1C_REG); + + rvin_write(vin, p_set->coeff_set[3], VNC2A_REG); + rvin_write(vin, p_set->coeff_set[4], VNC2B_REG); + rvin_write(vin, p_set->coeff_set[5], VNC2C_REG); + + rvin_write(vin, p_set->coeff_set[6], VNC3A_REG); + rvin_write(vin, p_set->coeff_set[7], VNC3B_REG); + rvin_write(vin, p_set->coeff_set[8], VNC3C_REG); + + rvin_write(vin, p_set->coeff_set[9], VNC4A_REG); + rvin_write(vin, p_set->coeff_set[10], VNC4B_REG); + rvin_write(vin, p_set->coeff_set[11], VNC4C_REG); + + rvin_write(vin, p_set->coeff_set[12], VNC5A_REG); + rvin_write(vin, p_set->coeff_set[13], VNC5B_REG); + rvin_write(vin, p_set->coeff_set[14], VNC5C_REG); + + rvin_write(vin, p_set->coeff_set[15], VNC6A_REG); + rvin_write(vin, p_set->coeff_set[16], VNC6B_REG); + rvin_write(vin, p_set->coeff_set[17], VNC6C_REG); + + rvin_write(vin, p_set->coeff_set[18], VNC7A_REG); + rvin_write(vin, p_set->coeff_set[19], VNC7B_REG); + rvin_write(vin, p_set->coeff_set[20], VNC7C_REG); + + rvin_write(vin, p_set->coeff_set[21], VNC8A_REG); + rvin_write(vin, p_set->coeff_set[22], VNC8B_REG); + rvin_write(vin, p_set->coeff_set[23], VNC8C_REG); +} + +static void rvin_crop_scale_comp_gen2(struct rvin_dev *vin) +{ + unsigned int crop_height; + u32 xs, ys; + + /* Set scaling coefficient */ + crop_height = vin->crop.height; + if (V4L2_FIELD_HAS_BOTH(vin->format.field)) + crop_height *= 2; + + ys = 0; + if (crop_height != vin->compose.height) + ys = (4096 * crop_height) / vin->compose.height; + rvin_write(vin, ys, VNYS_REG); + + xs = 0; + if (vin->crop.width != vin->compose.width) + xs = (4096 * vin->crop.width) / vin->compose.width; + + /* Horizontal upscaling is up to double size */ + if (xs > 0 && xs < 2048) + xs = 2048; + + rvin_write(vin, xs, VNXS_REG); + + /* Horizontal upscaling is done out by scaling down from double size */ + if (xs < 4096) + xs *= 2; + + rvin_set_coeff(vin, xs); + + /* Set Start/End Pixel/Line Post-Clip */ + rvin_write(vin, 0, VNSPPOC_REG); + rvin_write(vin, 0, VNSLPOC_REG); + rvin_write(vin, vin->format.width - 1, VNEPPOC_REG); + + if (V4L2_FIELD_HAS_BOTH(vin->format.field)) + rvin_write(vin, vin->format.height / 2 - 1, VNELPOC_REG); + else + rvin_write(vin, vin->format.height - 1, VNELPOC_REG); + + vin_dbg(vin, + "Pre-Clip: %ux%u@%u:%u YS: %d XS: %d Post-Clip: %ux%u@%u:%u\n", + vin->crop.width, vin->crop.height, vin->crop.left, + vin->crop.top, ys, xs, vin->format.width, vin->format.height, + 0, 0); +} + +void rvin_crop_scale_comp(struct rvin_dev *vin) +{ + const struct rvin_video_format *fmt; + u32 stride; + + /* Set Start/End Pixel/Line Pre-Clip */ + rvin_write(vin, vin->crop.left, VNSPPRC_REG); + rvin_write(vin, vin->crop.left + vin->crop.width - 1, VNEPPRC_REG); + rvin_write(vin, vin->crop.top, VNSLPRC_REG); + rvin_write(vin, vin->crop.top + vin->crop.height - 1, VNELPRC_REG); + + /* TODO: Add support for the UDS scaler. */ + if (vin->info->model != RCAR_GEN3) + rvin_crop_scale_comp_gen2(vin); + + fmt = rvin_format_from_pixel(vin, vin->format.pixelformat); + stride = vin->format.bytesperline / fmt->bpp; + + /* For RAW8 format bpp is 1, but the hardware process RAW8 + * format in 2 pixel unit hence configure VNIS_REG as stride / 2. + */ + switch (vin->format.pixelformat) { + case V4L2_PIX_FMT_SBGGR8: + case V4L2_PIX_FMT_SGBRG8: + case V4L2_PIX_FMT_SGRBG8: + case V4L2_PIX_FMT_SRGGB8: + case V4L2_PIX_FMT_GREY: + stride /= 2; + break; + default: + break; + } + + rvin_write(vin, stride, VNIS_REG); +} + +/* ----------------------------------------------------------------------------- + * Hardware setup + */ + +static int rvin_setup(struct rvin_dev *vin) +{ + u32 vnmc, dmr, dmr2, interrupts; + bool progressive = false, output_is_yuv = false, input_is_yuv = false; + + switch (vin->format.field) { + case V4L2_FIELD_TOP: + vnmc = VNMC_IM_ODD; + break; + case V4L2_FIELD_BOTTOM: + vnmc = VNMC_IM_EVEN; + break; + case V4L2_FIELD_INTERLACED: + /* Default to TB */ + vnmc = VNMC_IM_FULL; + /* Use BT if video standard can be read and is 60 Hz format */ + if (!vin->info->use_mc && vin->std & V4L2_STD_525_60) + vnmc = VNMC_IM_FULL | VNMC_FOC; + break; + case V4L2_FIELD_INTERLACED_TB: + vnmc = VNMC_IM_FULL; + break; + case V4L2_FIELD_INTERLACED_BT: + vnmc = VNMC_IM_FULL | VNMC_FOC; + break; + case V4L2_FIELD_SEQ_TB: + case V4L2_FIELD_SEQ_BT: + case V4L2_FIELD_NONE: + case V4L2_FIELD_ALTERNATE: + vnmc = VNMC_IM_ODD_EVEN; + progressive = true; + break; + default: + vnmc = VNMC_IM_ODD; + break; + } + + /* + * Input interface + */ + switch (vin->mbus_code) { + case MEDIA_BUS_FMT_YUYV8_1X16: + /* BT.601/BT.1358 16bit YCbCr422 */ + vnmc |= VNMC_INF_YUV16; + input_is_yuv = true; + break; + case MEDIA_BUS_FMT_UYVY8_1X16: + vnmc |= VNMC_INF_YUV16 | VNMC_YCAL; + input_is_yuv = true; + break; + case MEDIA_BUS_FMT_UYVY8_2X8: + /* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */ + if (!vin->is_csi && + vin->parallel.mbus_type == V4L2_MBUS_BT656) + vnmc |= VNMC_INF_YUV8_BT656; + else + vnmc |= VNMC_INF_YUV8_BT601; + + input_is_yuv = true; + break; + case MEDIA_BUS_FMT_RGB888_1X24: + vnmc |= VNMC_INF_RGB888; + break; + case MEDIA_BUS_FMT_UYVY10_2X10: + /* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */ + if (!vin->is_csi && + vin->parallel.mbus_type == V4L2_MBUS_BT656) + vnmc |= VNMC_INF_YUV10_BT656; + else + vnmc |= VNMC_INF_YUV10_BT601; + + input_is_yuv = true; + break; + case MEDIA_BUS_FMT_SBGGR8_1X8: + case MEDIA_BUS_FMT_SGBRG8_1X8: + case MEDIA_BUS_FMT_SGRBG8_1X8: + case MEDIA_BUS_FMT_SRGGB8_1X8: + case MEDIA_BUS_FMT_Y8_1X8: + vnmc |= VNMC_INF_RAW8; + break; + default: + break; + } + + /* Make sure input interface and input format is valid. */ + if (vin->info->model == RCAR_GEN3) { + switch (vnmc & VNMC_INF_MASK) { + case VNMC_INF_YUV8_BT656: + case VNMC_INF_YUV10_BT656: + case VNMC_INF_YUV16: + case VNMC_INF_RGB666: + if (vin->is_csi) { + vin_err(vin, "Invalid setting in MIPI CSI2\n"); + return -EINVAL; + } + break; + case VNMC_INF_RAW8: + if (!vin->is_csi) { + vin_err(vin, "Invalid setting in Digital Pins\n"); + return -EINVAL; + } + break; + default: + break; + } + } + + /* Enable VSYNC Field Toggle mode after one VSYNC input */ + if (vin->info->model == RCAR_GEN3) + dmr2 = VNDMR2_FTEV; + else + dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1); + + if (!vin->is_csi) { + /* Hsync Signal Polarity Select */ + if (!(vin->parallel.bus.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) + dmr2 |= VNDMR2_HPS; + + /* Vsync Signal Polarity Select */ + if (!(vin->parallel.bus.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) + dmr2 |= VNDMR2_VPS; + + /* Data Enable Polarity Select */ + if (vin->parallel.bus.flags & V4L2_MBUS_DATA_ENABLE_LOW) + dmr2 |= VNDMR2_CES; + + switch (vin->mbus_code) { + case MEDIA_BUS_FMT_UYVY8_2X8: + if (vin->parallel.bus.bus_width == 8 && + vin->parallel.bus.data_shift == 8) + dmr2 |= VNDMR2_YDS; + break; + default: + break; + } + } + + /* + * Output format + */ + switch (vin->format.pixelformat) { + case V4L2_PIX_FMT_NV12: + case V4L2_PIX_FMT_NV16: + rvin_write(vin, + ALIGN(vin->format.bytesperline * vin->format.height, + 0x80), VNUVAOF_REG); + dmr = vin->format.pixelformat == V4L2_PIX_FMT_NV12 ? + VNDMR_DTMD_YCSEP_420 : VNDMR_DTMD_YCSEP; + output_is_yuv = true; + break; + case V4L2_PIX_FMT_YUYV: + dmr = VNDMR_BPSM; + output_is_yuv = true; + break; + case V4L2_PIX_FMT_UYVY: + dmr = 0; + output_is_yuv = true; + break; + case V4L2_PIX_FMT_XRGB555: + dmr = VNDMR_DTMD_ARGB; + break; + case V4L2_PIX_FMT_RGB565: + dmr = 0; + break; + case V4L2_PIX_FMT_XBGR32: + /* Note: not supported on M1 */ + dmr = VNDMR_EXRGB; + break; + case V4L2_PIX_FMT_ARGB555: + dmr = (vin->alpha ? VNDMR_ABIT : 0) | VNDMR_DTMD_ARGB; + break; + case V4L2_PIX_FMT_ABGR32: + dmr = VNDMR_A8BIT(vin->alpha) | VNDMR_EXRGB | VNDMR_DTMD_ARGB; + break; + case V4L2_PIX_FMT_SBGGR8: + case V4L2_PIX_FMT_SGBRG8: + case V4L2_PIX_FMT_SGRBG8: + case V4L2_PIX_FMT_SRGGB8: + dmr = 0; + break; + case V4L2_PIX_FMT_GREY: + if (input_is_yuv) { + dmr = VNDMR_DTMD_YCSEP | VNDMR_YMODE_Y8; + output_is_yuv = true; + } else { + dmr = 0; + } + break; + default: + vin_err(vin, "Invalid pixelformat (0x%x)\n", + vin->format.pixelformat); + return -EINVAL; + } + + /* Always update on field change */ + vnmc |= VNMC_VUP; + + if (!vin->info->use_isp) { + /* If input and output use the same colorspace, use bypass mode */ + if (input_is_yuv == output_is_yuv) + vnmc |= VNMC_BPS; + + if (vin->info->model == RCAR_GEN3) { + /* Select between CSI-2 and parallel input */ + if (vin->is_csi) + vnmc &= ~VNMC_DPINE; + else + vnmc |= VNMC_DPINE; + } + } + + /* Progressive or interlaced mode */ + interrupts = progressive ? VNIE_FIE : VNIE_EFE; + + /* Ack interrupts */ + rvin_write(vin, interrupts, VNINTS_REG); + /* Enable interrupts */ + rvin_write(vin, interrupts, VNIE_REG); + /* Start capturing */ + rvin_write(vin, dmr, VNDMR_REG); + rvin_write(vin, dmr2, VNDMR2_REG); + + /* Enable module */ + rvin_write(vin, vnmc | VNMC_ME, VNMC_REG); + + return 0; +} + +static void rvin_disable_interrupts(struct rvin_dev *vin) +{ + rvin_write(vin, 0, VNIE_REG); +} + +static u32 rvin_get_interrupt_status(struct rvin_dev *vin) +{ + return rvin_read(vin, VNINTS_REG); +} + +static void rvin_ack_interrupt(struct rvin_dev *vin) +{ + rvin_write(vin, rvin_read(vin, VNINTS_REG), VNINTS_REG); +} + +static bool rvin_capture_active(struct rvin_dev *vin) +{ + return rvin_read(vin, VNMS_REG) & VNMS_CA; +} + +static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms) +{ + if (vin->format.field == V4L2_FIELD_ALTERNATE) { + /* If FS is set it is an Even field. */ + if (vnms & VNMS_FS) + return V4L2_FIELD_BOTTOM; + return V4L2_FIELD_TOP; + } + + return vin->format.field; +} + +static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t addr) +{ + const struct rvin_video_format *fmt; + int offsetx, offsety; + dma_addr_t offset; + + fmt = rvin_format_from_pixel(vin, vin->format.pixelformat); + + /* + * There is no HW support for composition do the beast we can + * by modifying the buffer offset + */ + offsetx = vin->compose.left * fmt->bpp; + offsety = vin->compose.top * vin->format.bytesperline; + offset = addr + offsetx + offsety; + + /* + * The address needs to be 128 bytes aligned. Driver should never accept + * settings that do not satisfy this in the first place... + */ + if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK)) + return; + + rvin_write(vin, offset, VNMB_REG(slot)); +} + +/* + * Moves a buffer from the queue to the HW slot. If no buffer is + * available use the scratch buffer. The scratch buffer is never + * returned to userspace, its only function is to enable the capture + * loop to keep running. + */ +static void rvin_fill_hw_slot(struct rvin_dev *vin, int slot) +{ + struct rvin_buffer *buf; + struct vb2_v4l2_buffer *vbuf; + dma_addr_t phys_addr; + int prev; + + /* A already populated slot shall never be overwritten. */ + if (WARN_ON(vin->buf_hw[slot].buffer)) + return; + + prev = (slot == 0 ? HW_BUFFER_NUM : slot) - 1; + + if (vin->buf_hw[prev].type == HALF_TOP) { + vbuf = vin->buf_hw[prev].buffer; + vin->buf_hw[slot].buffer = vbuf; + vin->buf_hw[slot].type = HALF_BOTTOM; + switch (vin->format.pixelformat) { + case V4L2_PIX_FMT_NV12: + case V4L2_PIX_FMT_NV16: + phys_addr = vin->buf_hw[prev].phys + + vin->format.sizeimage / 4; + break; + default: + phys_addr = vin->buf_hw[prev].phys + + vin->format.sizeimage / 2; + break; + } + } else if ((vin->state != STOPPED && vin->state != RUNNING) || + list_empty(&vin->buf_list)) { + vin->buf_hw[slot].buffer = NULL; + vin->buf_hw[slot].type = FULL; + phys_addr = vin->scratch_phys; + } else { + /* Keep track of buffer we give to HW */ + buf = list_entry(vin->buf_list.next, struct rvin_buffer, list); + vbuf = &buf->vb; + list_del_init(to_buf_list(vbuf)); + vin->buf_hw[slot].buffer = vbuf; + + vin->buf_hw[slot].type = + V4L2_FIELD_IS_SEQUENTIAL(vin->format.field) ? + HALF_TOP : FULL; + + /* Setup DMA */ + phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0); + } + + vin_dbg(vin, "Filling HW slot: %d type: %d buffer: %p\n", + slot, vin->buf_hw[slot].type, vin->buf_hw[slot].buffer); + + vin->buf_hw[slot].phys = phys_addr; + rvin_set_slot_addr(vin, slot, phys_addr); +} + +static int rvin_capture_start(struct rvin_dev *vin) +{ + int slot, ret; + + for (slot = 0; slot < HW_BUFFER_NUM; slot++) { + vin->buf_hw[slot].buffer = NULL; + vin->buf_hw[slot].type = FULL; + } + + for (slot = 0; slot < HW_BUFFER_NUM; slot++) + rvin_fill_hw_slot(vin, slot); + + rvin_crop_scale_comp(vin); + + ret = rvin_setup(vin); + if (ret) + return ret; + + vin_dbg(vin, "Starting to capture\n"); + + /* Continuous Frame Capture Mode */ + rvin_write(vin, VNFC_C_FRAME, VNFC_REG); + + vin->state = STARTING; + + return 0; +} + +static void rvin_capture_stop(struct rvin_dev *vin) +{ + /* Set continuous & single transfer off */ + rvin_write(vin, 0, VNFC_REG); + + /* Disable module */ + rvin_write(vin, rvin_read(vin, VNMC_REG) & ~VNMC_ME, VNMC_REG); +} + +/* ----------------------------------------------------------------------------- + * DMA Functions + */ + +#define RVIN_TIMEOUT_MS 100 +#define RVIN_RETRIES 10 + +static irqreturn_t rvin_irq(int irq, void *data) +{ + struct rvin_dev *vin = data; + u32 int_status, vnms; + int slot; + unsigned int handled = 0; + unsigned long flags; + + spin_lock_irqsave(&vin->qlock, flags); + + int_status = rvin_get_interrupt_status(vin); + if (!int_status) + goto done; + + rvin_ack_interrupt(vin); + handled = 1; + + /* Nothing to do if nothing was captured. */ + if (!(int_status & VNINTS_FIS)) + goto done; + + /* Nothing to do if capture status is 'STOPPED' */ + if (vin->state == STOPPED) { + vin_dbg(vin, "IRQ while state stopped\n"); + goto done; + } + + /* Prepare for capture and update state */ + vnms = rvin_read(vin, VNMS_REG); + slot = (vnms & VNMS_FBS_MASK) >> VNMS_FBS_SHIFT; + + /* + * To hand buffers back in a known order to userspace start + * to capture first from slot 0. + */ + if (vin->state == STARTING) { + if (slot != 0) { + vin_dbg(vin, "Starting sync slot: %d\n", slot); + goto done; + } + + vin_dbg(vin, "Capture start synced!\n"); + vin->state = RUNNING; + } + + /* Capture frame */ + if (vin->buf_hw[slot].buffer) { + /* + * Nothing to do but refill the hardware slot if + * capture only filled first half of vb2 buffer. + */ + if (vin->buf_hw[slot].type == HALF_TOP) { + vin->buf_hw[slot].buffer = NULL; + rvin_fill_hw_slot(vin, slot); + goto done; + } + + vin->buf_hw[slot].buffer->field = + rvin_get_active_field(vin, vnms); + vin->buf_hw[slot].buffer->sequence = vin->sequence; + vin->buf_hw[slot].buffer->vb2_buf.timestamp = ktime_get_ns(); + vb2_buffer_done(&vin->buf_hw[slot].buffer->vb2_buf, + VB2_BUF_STATE_DONE); + vin->buf_hw[slot].buffer = NULL; + } else { + /* Scratch buffer was used, dropping frame. */ + vin_dbg(vin, "Dropping frame %u\n", vin->sequence); + } + + vin->sequence++; + + /* Prepare for next frame */ + rvin_fill_hw_slot(vin, slot); +done: + spin_unlock_irqrestore(&vin->qlock, flags); + + return IRQ_RETVAL(handled); +} + +static void return_unused_buffers(struct rvin_dev *vin, + enum vb2_buffer_state state) +{ + struct rvin_buffer *buf, *node; + unsigned long flags; + + spin_lock_irqsave(&vin->qlock, flags); + + list_for_each_entry_safe(buf, node, &vin->buf_list, list) { + vb2_buffer_done(&buf->vb.vb2_buf, state); + list_del(&buf->list); + } + + spin_unlock_irqrestore(&vin->qlock, flags); +} + +static int rvin_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, + unsigned int *nplanes, unsigned int sizes[], + struct device *alloc_devs[]) + +{ + struct rvin_dev *vin = vb2_get_drv_priv(vq); + + /* Make sure the image size is large enough. */ + if (*nplanes) + return sizes[0] < vin->format.sizeimage ? -EINVAL : 0; + + *nplanes = 1; + sizes[0] = vin->format.sizeimage; + + return 0; +}; + +static int rvin_buffer_prepare(struct vb2_buffer *vb) +{ + struct rvin_dev *vin = vb2_get_drv_priv(vb->vb2_queue); + unsigned long size = vin->format.sizeimage; + + if (vb2_plane_size(vb, 0) < size) { + vin_err(vin, "buffer too small (%lu < %lu)\n", + vb2_plane_size(vb, 0), size); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, size); + + return 0; +} + +static void rvin_buffer_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct rvin_dev *vin = vb2_get_drv_priv(vb->vb2_queue); + unsigned long flags; + + spin_lock_irqsave(&vin->qlock, flags); + + list_add_tail(to_buf_list(vbuf), &vin->buf_list); + + spin_unlock_irqrestore(&vin->qlock, flags); +} + +static int rvin_mc_validate_format(struct rvin_dev *vin, struct v4l2_subdev *sd, + struct media_pad *pad) +{ + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + + fmt.pad = pad->index; + if (v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt)) + return -EPIPE; + + switch (fmt.format.code) { + case MEDIA_BUS_FMT_YUYV8_1X16: + case MEDIA_BUS_FMT_UYVY8_1X16: + case MEDIA_BUS_FMT_UYVY8_2X8: + case MEDIA_BUS_FMT_UYVY10_2X10: + case MEDIA_BUS_FMT_RGB888_1X24: + break; + case MEDIA_BUS_FMT_SBGGR8_1X8: + if (vin->format.pixelformat != V4L2_PIX_FMT_SBGGR8) + return -EPIPE; + break; + case MEDIA_BUS_FMT_SGBRG8_1X8: + if (vin->format.pixelformat != V4L2_PIX_FMT_SGBRG8) + return -EPIPE; + break; + case MEDIA_BUS_FMT_SGRBG8_1X8: + if (vin->format.pixelformat != V4L2_PIX_FMT_SGRBG8) + return -EPIPE; + break; + case MEDIA_BUS_FMT_SRGGB8_1X8: + if (vin->format.pixelformat != V4L2_PIX_FMT_SRGGB8) + return -EPIPE; + break; + case MEDIA_BUS_FMT_Y8_1X8: + if (vin->format.pixelformat != V4L2_PIX_FMT_GREY) + return -EPIPE; + break; + default: + return -EPIPE; + } + vin->mbus_code = fmt.format.code; + + switch (fmt.format.field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + case V4L2_FIELD_NONE: + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_SEQ_TB: + case V4L2_FIELD_SEQ_BT: + /* Supported natively */ + break; + case V4L2_FIELD_ALTERNATE: + switch (vin->format.field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + case V4L2_FIELD_NONE: + case V4L2_FIELD_ALTERNATE: + break; + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_SEQ_TB: + case V4L2_FIELD_SEQ_BT: + /* Use VIN hardware to combine the two fields */ + fmt.format.height *= 2; + break; + default: + return -EPIPE; + } + break; + default: + return -EPIPE; + } + + if (fmt.format.width != vin->format.width || + fmt.format.height != vin->format.height || + fmt.format.code != vin->mbus_code) + return -EPIPE; + + return 0; +} + +static int rvin_set_stream(struct rvin_dev *vin, int on) +{ + struct v4l2_subdev *sd; + struct media_pad *pad; + int ret; + + /* No media controller used, simply pass operation to subdevice. */ + if (!vin->info->use_mc) { + ret = v4l2_subdev_call(vin->parallel.subdev, video, s_stream, + on); + + return ret == -ENOIOCTLCMD ? 0 : ret; + } + + pad = media_pad_remote_pad_first(&vin->pad); + if (!pad) + return -EPIPE; + + sd = media_entity_to_v4l2_subdev(pad->entity); + + if (!on) { + video_device_pipeline_stop(&vin->vdev); + return v4l2_subdev_call(sd, video, s_stream, 0); + } + + ret = rvin_mc_validate_format(vin, sd, pad); + if (ret) + return ret; + + ret = video_device_pipeline_alloc_start(&vin->vdev); + if (ret) + return ret; + + ret = v4l2_subdev_call(sd, video, s_stream, 1); + if (ret == -ENOIOCTLCMD) + ret = 0; + if (ret) + video_device_pipeline_stop(&vin->vdev); + + return ret; +} + +int rvin_start_streaming(struct rvin_dev *vin) +{ + unsigned long flags; + int ret; + + ret = rvin_set_stream(vin, 1); + if (ret) + return ret; + + spin_lock_irqsave(&vin->qlock, flags); + + vin->sequence = 0; + + ret = rvin_capture_start(vin); + if (ret) + rvin_set_stream(vin, 0); + + spin_unlock_irqrestore(&vin->qlock, flags); + + return ret; +} + +static int rvin_start_streaming_vq(struct vb2_queue *vq, unsigned int count) +{ + struct rvin_dev *vin = vb2_get_drv_priv(vq); + int ret = -ENOMEM; + + /* Allocate scratch buffer. */ + vin->scratch = dma_alloc_coherent(vin->dev, vin->format.sizeimage, + &vin->scratch_phys, GFP_KERNEL); + if (!vin->scratch) + goto err_scratch; + + ret = rvin_start_streaming(vin); + if (ret) + goto err_start; + + return 0; +err_start: + dma_free_coherent(vin->dev, vin->format.sizeimage, vin->scratch, + vin->scratch_phys); +err_scratch: + return_unused_buffers(vin, VB2_BUF_STATE_QUEUED); + + return ret; +} + +void rvin_stop_streaming(struct rvin_dev *vin) +{ + unsigned int i, retries; + unsigned long flags; + bool buffersFreed; + + spin_lock_irqsave(&vin->qlock, flags); + + if (vin->state == STOPPED) { + spin_unlock_irqrestore(&vin->qlock, flags); + return; + } + + vin->state = STOPPING; + + /* Wait until only scratch buffer is used, max 3 interrupts. */ + retries = 0; + while (retries++ < RVIN_RETRIES) { + buffersFreed = true; + for (i = 0; i < HW_BUFFER_NUM; i++) + if (vin->buf_hw[i].buffer) + buffersFreed = false; + + if (buffersFreed) + break; + + spin_unlock_irqrestore(&vin->qlock, flags); + msleep(RVIN_TIMEOUT_MS); + spin_lock_irqsave(&vin->qlock, flags); + } + + /* Wait for streaming to stop */ + retries = 0; + while (retries++ < RVIN_RETRIES) { + + rvin_capture_stop(vin); + + /* Check if HW is stopped */ + if (!rvin_capture_active(vin)) { + vin->state = STOPPED; + break; + } + + spin_unlock_irqrestore(&vin->qlock, flags); + msleep(RVIN_TIMEOUT_MS); + spin_lock_irqsave(&vin->qlock, flags); + } + + if (!buffersFreed || vin->state != STOPPED) { + /* + * If this happens something have gone horribly wrong. + * Set state to stopped to prevent the interrupt handler + * to make things worse... + */ + vin_err(vin, "Failed stop HW, something is seriously broken\n"); + vin->state = STOPPED; + } + + spin_unlock_irqrestore(&vin->qlock, flags); + + /* If something went wrong, free buffers with an error. */ + if (!buffersFreed) { + return_unused_buffers(vin, VB2_BUF_STATE_ERROR); + for (i = 0; i < HW_BUFFER_NUM; i++) { + if (vin->buf_hw[i].buffer) + vb2_buffer_done(&vin->buf_hw[i].buffer->vb2_buf, + VB2_BUF_STATE_ERROR); + } + } + + rvin_set_stream(vin, 0); + + /* disable interrupts */ + rvin_disable_interrupts(vin); +} + +static void rvin_stop_streaming_vq(struct vb2_queue *vq) +{ + struct rvin_dev *vin = vb2_get_drv_priv(vq); + + rvin_stop_streaming(vin); + + /* Free scratch buffer. */ + dma_free_coherent(vin->dev, vin->format.sizeimage, vin->scratch, + vin->scratch_phys); + + return_unused_buffers(vin, VB2_BUF_STATE_ERROR); +} + +static const struct vb2_ops rvin_qops = { + .queue_setup = rvin_queue_setup, + .buf_prepare = rvin_buffer_prepare, + .buf_queue = rvin_buffer_queue, + .start_streaming = rvin_start_streaming_vq, + .stop_streaming = rvin_stop_streaming_vq, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +void rvin_dma_unregister(struct rvin_dev *vin) +{ + mutex_destroy(&vin->lock); + + v4l2_device_unregister(&vin->v4l2_dev); +} + +int rvin_dma_register(struct rvin_dev *vin, int irq) +{ + struct vb2_queue *q = &vin->queue; + int i, ret; + + /* Initialize the top-level structure */ + ret = v4l2_device_register(vin->dev, &vin->v4l2_dev); + if (ret) + return ret; + + mutex_init(&vin->lock); + INIT_LIST_HEAD(&vin->buf_list); + + spin_lock_init(&vin->qlock); + + vin->state = STOPPED; + + for (i = 0; i < HW_BUFFER_NUM; i++) + vin->buf_hw[i].buffer = NULL; + + /* buffer queue */ + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF; + q->lock = &vin->lock; + q->drv_priv = vin; + q->buf_struct_size = sizeof(struct rvin_buffer); + q->ops = &rvin_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->min_buffers_needed = 4; + q->dev = vin->dev; + + ret = vb2_queue_init(q); + if (ret < 0) { + vin_err(vin, "failed to initialize VB2 queue\n"); + goto error; + } + + /* irq */ + ret = devm_request_irq(vin->dev, irq, rvin_irq, IRQF_SHARED, + KBUILD_MODNAME, vin); + if (ret) { + vin_err(vin, "failed to request irq\n"); + goto error; + } + + return 0; +error: + rvin_dma_unregister(vin); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Gen3 CHSEL manipulation + */ + +/* + * There is no need to have locking around changing the routing + * as it's only possible to do so when no VIN in the group is + * streaming so nothing can race with the VNMC register. + */ +int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel) +{ + const struct rvin_group_route *route; + u32 ifmd = 0; + u32 vnmc; + int ret; + + ret = pm_runtime_resume_and_get(vin->dev); + if (ret < 0) + return ret; + + /* Make register writes take effect immediately. */ + vnmc = rvin_read(vin, VNMC_REG); + rvin_write(vin, vnmc & ~VNMC_VUP, VNMC_REG); + + /* + * Set data expansion mode to "pad with 0s" by inspecting the routes + * table to find out which bit fields are available in the IFMD + * register. IFMD_DES1 controls data expansion mode for CSI20/21, + * IFMD_DES0 controls data expansion mode for CSI40/41. + */ + for (route = vin->info->routes; route->chsel; route++) { + if (route->csi == RVIN_CSI20 || route->csi == RVIN_CSI21) + ifmd |= VNCSI_IFMD_DES1; + else + ifmd |= VNCSI_IFMD_DES0; + + if (ifmd == (VNCSI_IFMD_DES0 | VNCSI_IFMD_DES1)) + break; + } + + if (ifmd) { + ifmd |= VNCSI_IFMD_CSI_CHSEL(chsel); + rvin_write(vin, ifmd, VNCSI_IFMD_REG); + } + + vin_dbg(vin, "Set IFMD 0x%x\n", ifmd); + + vin->chsel = chsel; + + /* Restore VNMC. */ + rvin_write(vin, vnmc, VNMC_REG); + + pm_runtime_put(vin->dev); + + return 0; +} + +void rvin_set_alpha(struct rvin_dev *vin, unsigned int alpha) +{ + unsigned long flags; + u32 dmr; + + spin_lock_irqsave(&vin->qlock, flags); + + vin->alpha = alpha; + + if (vin->state == STOPPED) + goto out; + + switch (vin->format.pixelformat) { + case V4L2_PIX_FMT_ARGB555: + dmr = rvin_read(vin, VNDMR_REG) & ~VNDMR_ABIT; + if (vin->alpha) + dmr |= VNDMR_ABIT; + break; + case V4L2_PIX_FMT_ABGR32: + dmr = rvin_read(vin, VNDMR_REG) & ~VNDMR_A8BIT_MASK; + dmr |= VNDMR_A8BIT(vin->alpha); + break; + default: + goto out; + } + + rvin_write(vin, dmr, VNDMR_REG); +out: + spin_unlock_irqrestore(&vin->qlock, flags); +} diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c new file mode 100644 index 000000000..576059f9b --- /dev/null +++ b/drivers/media/platform/renesas/rcar-vin/rcar-v4l2.c @@ -0,0 +1,1093 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Renesas R-Car VIN + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2011-2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com> + * Copyright (C) 2008 Magnus Damm + * + * Based on the soc-camera rcar_vin driver + */ + +#include <linux/pm_runtime.h> + +#include <media/v4l2-event.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-mc.h> +#include <media/v4l2-rect.h> + +#include "rcar-vin.h" + +#define RVIN_DEFAULT_FORMAT V4L2_PIX_FMT_YUYV +#define RVIN_DEFAULT_WIDTH 800 +#define RVIN_DEFAULT_HEIGHT 600 +#define RVIN_DEFAULT_FIELD V4L2_FIELD_NONE +#define RVIN_DEFAULT_COLORSPACE V4L2_COLORSPACE_SRGB + +/* ----------------------------------------------------------------------------- + * Format Conversions + */ + +static const struct rvin_video_format rvin_formats[] = { + { + .fourcc = V4L2_PIX_FMT_NV12, + .bpp = 1, + }, + { + .fourcc = V4L2_PIX_FMT_NV16, + .bpp = 1, + }, + { + .fourcc = V4L2_PIX_FMT_YUYV, + .bpp = 2, + }, + { + .fourcc = V4L2_PIX_FMT_UYVY, + .bpp = 2, + }, + { + .fourcc = V4L2_PIX_FMT_RGB565, + .bpp = 2, + }, + { + .fourcc = V4L2_PIX_FMT_XRGB555, + .bpp = 2, + }, + { + .fourcc = V4L2_PIX_FMT_XBGR32, + .bpp = 4, + }, + { + .fourcc = V4L2_PIX_FMT_ARGB555, + .bpp = 2, + }, + { + .fourcc = V4L2_PIX_FMT_ABGR32, + .bpp = 4, + }, + { + .fourcc = V4L2_PIX_FMT_SBGGR8, + .bpp = 1, + }, + { + .fourcc = V4L2_PIX_FMT_SGBRG8, + .bpp = 1, + }, + { + .fourcc = V4L2_PIX_FMT_SGRBG8, + .bpp = 1, + }, + { + .fourcc = V4L2_PIX_FMT_SRGGB8, + .bpp = 1, + }, + { + .fourcc = V4L2_PIX_FMT_GREY, + .bpp = 1, + }, +}; + +const struct rvin_video_format *rvin_format_from_pixel(struct rvin_dev *vin, + u32 pixelformat) +{ + int i; + + switch (pixelformat) { + case V4L2_PIX_FMT_XBGR32: + if (vin->info->model == RCAR_M1) + return NULL; + break; + case V4L2_PIX_FMT_NV12: + /* + * If NV12 is supported it's only supported on channels 0, 1, 4, + * 5, 8, 9, 12 and 13. + */ + if (!vin->info->nv12 || !(BIT(vin->id) & 0x3333)) + return NULL; + break; + default: + break; + } + + for (i = 0; i < ARRAY_SIZE(rvin_formats); i++) + if (rvin_formats[i].fourcc == pixelformat) + return rvin_formats + i; + + return NULL; +} + +static u32 rvin_format_bytesperline(struct rvin_dev *vin, + struct v4l2_pix_format *pix) +{ + const struct rvin_video_format *fmt; + u32 align; + + fmt = rvin_format_from_pixel(vin, pix->pixelformat); + + if (WARN_ON(!fmt)) + return -EINVAL; + + switch (pix->pixelformat) { + case V4L2_PIX_FMT_NV12: + case V4L2_PIX_FMT_NV16: + align = 0x20; + break; + default: + align = 0x10; + break; + } + + if (V4L2_FIELD_IS_SEQUENTIAL(pix->field)) + align = 0x80; + + return ALIGN(pix->width, align) * fmt->bpp; +} + +static u32 rvin_format_sizeimage(struct v4l2_pix_format *pix) +{ + switch (pix->pixelformat) { + case V4L2_PIX_FMT_NV12: + return pix->bytesperline * pix->height * 3 / 2; + case V4L2_PIX_FMT_NV16: + return pix->bytesperline * pix->height * 2; + default: + return pix->bytesperline * pix->height; + } +} + +static void rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix) +{ + u32 walign; + + if (!rvin_format_from_pixel(vin, pix->pixelformat)) + pix->pixelformat = RVIN_DEFAULT_FORMAT; + + switch (pix->field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + case V4L2_FIELD_NONE: + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_ALTERNATE: + case V4L2_FIELD_SEQ_TB: + case V4L2_FIELD_SEQ_BT: + break; + default: + pix->field = RVIN_DEFAULT_FIELD; + break; + } + + /* Hardware limits width alignment based on format. */ + switch (pix->pixelformat) { + /* Multiple of 32 (2^5) for NV12/16. */ + case V4L2_PIX_FMT_NV12: + case V4L2_PIX_FMT_NV16: + walign = 5; + break; + /* Multiple of 2 (2^1) for YUV. */ + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + walign = 1; + break; + /* No multiple for RGB. */ + default: + walign = 0; + break; + } + + /* Limit to VIN capabilities */ + v4l_bound_align_image(&pix->width, 5, vin->info->max_width, walign, + &pix->height, 2, vin->info->max_height, 0, 0); + + pix->bytesperline = rvin_format_bytesperline(vin, pix); + pix->sizeimage = rvin_format_sizeimage(pix); + + vin_dbg(vin, "Format %ux%u bpl: %u size: %u\n", + pix->width, pix->height, pix->bytesperline, pix->sizeimage); +} + +/* ----------------------------------------------------------------------------- + * V4L2 + */ + +static int rvin_reset_format(struct rvin_dev *vin) +{ + struct v4l2_subdev_format fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .pad = vin->parallel.source_pad, + }; + int ret; + + ret = v4l2_subdev_call(vin_to_source(vin), pad, get_fmt, NULL, &fmt); + if (ret) + return ret; + + v4l2_fill_pix_format(&vin->format, &fmt.format); + + vin->src_rect.top = 0; + vin->src_rect.left = 0; + vin->src_rect.width = vin->format.width; + vin->src_rect.height = vin->format.height; + + /* Make use of the hardware interlacer by default. */ + if (vin->format.field == V4L2_FIELD_ALTERNATE) { + vin->format.field = V4L2_FIELD_INTERLACED; + vin->format.height *= 2; + } + + rvin_format_align(vin, &vin->format); + + vin->crop = vin->src_rect; + + vin->compose.top = 0; + vin->compose.left = 0; + vin->compose.width = vin->format.width; + vin->compose.height = vin->format.height; + + return 0; +} + +static int rvin_try_format(struct rvin_dev *vin, u32 which, + struct v4l2_pix_format *pix, + struct v4l2_rect *src_rect) +{ + struct v4l2_subdev *sd = vin_to_source(vin); + struct v4l2_subdev_state *sd_state; + static struct lock_class_key key; + struct v4l2_subdev_format format = { + .which = which, + .pad = vin->parallel.source_pad, + }; + enum v4l2_field field; + u32 width, height; + int ret; + + /* + * FIXME: Drop this call, drivers are not supposed to use + * __v4l2_subdev_state_alloc(). + */ + sd_state = __v4l2_subdev_state_alloc(sd, "rvin:state->lock", &key); + if (IS_ERR(sd_state)) + return PTR_ERR(sd_state); + + if (!rvin_format_from_pixel(vin, pix->pixelformat)) + pix->pixelformat = RVIN_DEFAULT_FORMAT; + + v4l2_fill_mbus_format(&format.format, pix, vin->mbus_code); + + /* Allow the video device to override field and to scale */ + field = pix->field; + width = pix->width; + height = pix->height; + + ret = v4l2_subdev_call(sd, pad, set_fmt, sd_state, &format); + if (ret < 0 && ret != -ENOIOCTLCMD) + goto done; + ret = 0; + + v4l2_fill_pix_format(pix, &format.format); + + if (src_rect) { + src_rect->top = 0; + src_rect->left = 0; + src_rect->width = pix->width; + src_rect->height = pix->height; + } + + if (field != V4L2_FIELD_ANY) + pix->field = field; + + pix->width = width; + pix->height = height; + + rvin_format_align(vin, pix); +done: + __v4l2_subdev_state_free(sd_state); + + return ret; +} + +static int rvin_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver)); + strscpy(cap->card, "R_Car_VIN", sizeof(cap->card)); + return 0; +} + +static int rvin_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct rvin_dev *vin = video_drvdata(file); + + return rvin_try_format(vin, V4L2_SUBDEV_FORMAT_TRY, &f->fmt.pix, NULL); +} + +static int rvin_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_rect fmt_rect, src_rect; + int ret; + + if (vb2_is_busy(&vin->queue)) + return -EBUSY; + + ret = rvin_try_format(vin, V4L2_SUBDEV_FORMAT_ACTIVE, &f->fmt.pix, + &src_rect); + if (ret) + return ret; + + vin->format = f->fmt.pix; + + fmt_rect.top = 0; + fmt_rect.left = 0; + fmt_rect.width = vin->format.width; + fmt_rect.height = vin->format.height; + + v4l2_rect_map_inside(&vin->crop, &src_rect); + v4l2_rect_map_inside(&vin->compose, &fmt_rect); + vin->src_rect = src_rect; + + return 0; +} + +static int rvin_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct rvin_dev *vin = video_drvdata(file); + + f->fmt.pix = vin->format; + + return 0; +} + +static int rvin_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct rvin_dev *vin = video_drvdata(file); + unsigned int i; + int matched; + + /* + * If mbus_code is set only enumerate supported pixel formats for that + * bus code. Converting from YCbCr to RGB and RGB to YCbCr is possible + * with VIN, so all supported YCbCr and RGB media bus codes can produce + * all of the related pixel formats. If mbus_code is not set enumerate + * all possible pixelformats. + * + * TODO: Once raw MEDIA_BUS_FMT_SRGGB12_1X12 format is added to the + * driver this needs to be extended so raw media bus code only result in + * raw pixel format. + */ + switch (f->mbus_code) { + case 0: + case MEDIA_BUS_FMT_YUYV8_1X16: + case MEDIA_BUS_FMT_UYVY8_1X16: + case MEDIA_BUS_FMT_UYVY8_2X8: + case MEDIA_BUS_FMT_UYVY10_2X10: + case MEDIA_BUS_FMT_RGB888_1X24: + break; + case MEDIA_BUS_FMT_SBGGR8_1X8: + if (f->index) + return -EINVAL; + f->pixelformat = V4L2_PIX_FMT_SBGGR8; + return 0; + case MEDIA_BUS_FMT_SGBRG8_1X8: + if (f->index) + return -EINVAL; + f->pixelformat = V4L2_PIX_FMT_SGBRG8; + return 0; + case MEDIA_BUS_FMT_SGRBG8_1X8: + if (f->index) + return -EINVAL; + f->pixelformat = V4L2_PIX_FMT_SGRBG8; + return 0; + case MEDIA_BUS_FMT_SRGGB8_1X8: + if (f->index) + return -EINVAL; + f->pixelformat = V4L2_PIX_FMT_SRGGB8; + return 0; + default: + return -EINVAL; + } + + matched = -1; + for (i = 0; i < ARRAY_SIZE(rvin_formats); i++) { + if (rvin_format_from_pixel(vin, rvin_formats[i].fourcc)) + matched++; + + if (matched == f->index) { + f->pixelformat = rvin_formats[i].fourcc; + return 0; + } + } + + return -EINVAL; +} + +static int rvin_g_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct rvin_dev *vin = video_drvdata(file); + + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + switch (s->target) { + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + s->r.left = s->r.top = 0; + s->r.width = vin->src_rect.width; + s->r.height = vin->src_rect.height; + break; + case V4L2_SEL_TGT_CROP: + s->r = vin->crop; + break; + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + s->r.left = s->r.top = 0; + s->r.width = vin->format.width; + s->r.height = vin->format.height; + break; + case V4L2_SEL_TGT_COMPOSE: + s->r = vin->compose; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int rvin_s_selection(struct file *file, void *fh, + struct v4l2_selection *s) +{ + struct rvin_dev *vin = video_drvdata(file); + const struct rvin_video_format *fmt; + struct v4l2_rect r = s->r; + struct v4l2_rect max_rect; + struct v4l2_rect min_rect = { + .width = 6, + .height = 2, + }; + + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + v4l2_rect_set_min_size(&r, &min_rect); + + switch (s->target) { + case V4L2_SEL_TGT_CROP: + /* Can't crop outside of source input */ + max_rect.top = max_rect.left = 0; + max_rect.width = vin->src_rect.width; + max_rect.height = vin->src_rect.height; + v4l2_rect_map_inside(&r, &max_rect); + + v4l_bound_align_image(&r.width, 6, vin->src_rect.width, 0, + &r.height, 2, vin->src_rect.height, 0, 0); + + r.top = clamp_t(s32, r.top, 0, + vin->src_rect.height - r.height); + r.left = clamp_t(s32, r.left, 0, vin->src_rect.width - r.width); + + vin->crop = s->r = r; + + vin_dbg(vin, "Cropped %dx%d@%d:%d of %dx%d\n", + r.width, r.height, r.left, r.top, + vin->src_rect.width, vin->src_rect.height); + break; + case V4L2_SEL_TGT_COMPOSE: + /* Make sure compose rect fits inside output format */ + max_rect.top = max_rect.left = 0; + max_rect.width = vin->format.width; + max_rect.height = vin->format.height; + v4l2_rect_map_inside(&r, &max_rect); + + /* + * Composing is done by adding a offset to the buffer address, + * the HW wants this address to be aligned to HW_BUFFER_MASK. + * Make sure the top and left values meets this requirement. + */ + while ((r.top * vin->format.bytesperline) & HW_BUFFER_MASK) + r.top--; + + fmt = rvin_format_from_pixel(vin, vin->format.pixelformat); + while ((r.left * fmt->bpp) & HW_BUFFER_MASK) + r.left--; + + vin->compose = s->r = r; + + vin_dbg(vin, "Compose %dx%d@%d:%d in %dx%d\n", + r.width, r.height, r.left, r.top, + vin->format.width, vin->format.height); + break; + default: + return -EINVAL; + } + + /* HW supports modifying configuration while running */ + rvin_crop_scale_comp(vin); + + return 0; +} + +static int rvin_g_parm(struct file *file, void *priv, + struct v4l2_streamparm *parm) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + + return v4l2_g_parm_cap(&vin->vdev, sd, parm); +} + +static int rvin_s_parm(struct file *file, void *priv, + struct v4l2_streamparm *parm) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + + return v4l2_s_parm_cap(&vin->vdev, sd, parm); +} + +static int rvin_g_pixelaspect(struct file *file, void *priv, + int type, struct v4l2_fract *f) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + + if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + return v4l2_subdev_call(sd, video, g_pixelaspect, f); +} + +static int rvin_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + int ret; + + if (i->index != 0) + return -EINVAL; + + ret = v4l2_subdev_call(sd, video, g_input_status, &i->status); + if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) + return ret; + + i->type = V4L2_INPUT_TYPE_CAMERA; + + if (v4l2_subdev_has_op(sd, pad, dv_timings_cap)) { + i->capabilities = V4L2_IN_CAP_DV_TIMINGS; + i->std = 0; + } else { + i->capabilities = V4L2_IN_CAP_STD; + i->std = vin->vdev.tvnorms; + } + + strscpy(i->name, "Camera", sizeof(i->name)); + + return 0; +} + +static int rvin_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int rvin_s_input(struct file *file, void *priv, unsigned int i) +{ + if (i > 0) + return -EINVAL; + return 0; +} + +static int rvin_querystd(struct file *file, void *priv, v4l2_std_id *a) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + + return v4l2_subdev_call(sd, video, querystd, a); +} + +static int rvin_s_std(struct file *file, void *priv, v4l2_std_id a) +{ + struct rvin_dev *vin = video_drvdata(file); + int ret; + + ret = v4l2_subdev_call(vin_to_source(vin), video, s_std, a); + if (ret < 0) + return ret; + + vin->std = a; + + /* Changing the standard will change the width/height */ + return rvin_reset_format(vin); +} + +static int rvin_g_std(struct file *file, void *priv, v4l2_std_id *a) +{ + struct rvin_dev *vin = video_drvdata(file); + + if (v4l2_subdev_has_op(vin_to_source(vin), pad, dv_timings_cap)) + return -ENOIOCTLCMD; + + *a = vin->std; + + return 0; +} + +static int rvin_subscribe_event(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_SOURCE_CHANGE: + return v4l2_event_subscribe(fh, sub, 4, NULL); + } + return v4l2_ctrl_subscribe_event(fh, sub); +} + +static int rvin_enum_dv_timings(struct file *file, void *priv_fh, + struct v4l2_enum_dv_timings *timings) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + int ret; + + if (timings->pad) + return -EINVAL; + + timings->pad = vin->parallel.sink_pad; + + ret = v4l2_subdev_call(sd, pad, enum_dv_timings, timings); + + timings->pad = 0; + + return ret; +} + +static int rvin_s_dv_timings(struct file *file, void *priv_fh, + struct v4l2_dv_timings *timings) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + int ret; + + ret = v4l2_subdev_call(sd, video, s_dv_timings, timings); + if (ret) + return ret; + + /* Changing the timings will change the width/height */ + return rvin_reset_format(vin); +} + +static int rvin_g_dv_timings(struct file *file, void *priv_fh, + struct v4l2_dv_timings *timings) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + + return v4l2_subdev_call(sd, video, g_dv_timings, timings); +} + +static int rvin_query_dv_timings(struct file *file, void *priv_fh, + struct v4l2_dv_timings *timings) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + + return v4l2_subdev_call(sd, video, query_dv_timings, timings); +} + +static int rvin_dv_timings_cap(struct file *file, void *priv_fh, + struct v4l2_dv_timings_cap *cap) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + int ret; + + if (cap->pad) + return -EINVAL; + + cap->pad = vin->parallel.sink_pad; + + ret = v4l2_subdev_call(sd, pad, dv_timings_cap, cap); + + cap->pad = 0; + + return ret; +} + +static int rvin_g_edid(struct file *file, void *fh, struct v4l2_edid *edid) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + int ret; + + if (edid->pad) + return -EINVAL; + + edid->pad = vin->parallel.sink_pad; + + ret = v4l2_subdev_call(sd, pad, get_edid, edid); + + edid->pad = 0; + + return ret; +} + +static int rvin_s_edid(struct file *file, void *fh, struct v4l2_edid *edid) +{ + struct rvin_dev *vin = video_drvdata(file); + struct v4l2_subdev *sd = vin_to_source(vin); + int ret; + + if (edid->pad) + return -EINVAL; + + edid->pad = vin->parallel.sink_pad; + + ret = v4l2_subdev_call(sd, pad, set_edid, edid); + + edid->pad = 0; + + return ret; +} + +static const struct v4l2_ioctl_ops rvin_ioctl_ops = { + .vidioc_querycap = rvin_querycap, + .vidioc_try_fmt_vid_cap = rvin_try_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = rvin_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = rvin_s_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = rvin_enum_fmt_vid_cap, + + .vidioc_g_selection = rvin_g_selection, + .vidioc_s_selection = rvin_s_selection, + + .vidioc_g_parm = rvin_g_parm, + .vidioc_s_parm = rvin_s_parm, + + .vidioc_g_pixelaspect = rvin_g_pixelaspect, + + .vidioc_enum_input = rvin_enum_input, + .vidioc_g_input = rvin_g_input, + .vidioc_s_input = rvin_s_input, + + .vidioc_dv_timings_cap = rvin_dv_timings_cap, + .vidioc_enum_dv_timings = rvin_enum_dv_timings, + .vidioc_g_dv_timings = rvin_g_dv_timings, + .vidioc_s_dv_timings = rvin_s_dv_timings, + .vidioc_query_dv_timings = rvin_query_dv_timings, + + .vidioc_g_edid = rvin_g_edid, + .vidioc_s_edid = rvin_s_edid, + + .vidioc_querystd = rvin_querystd, + .vidioc_g_std = rvin_g_std, + .vidioc_s_std = rvin_s_std, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = rvin_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 Media Controller + */ + +static void rvin_mc_try_format(struct rvin_dev *vin, + struct v4l2_pix_format *pix) +{ + /* + * The V4L2 specification clearly documents the colorspace fields + * as being set by drivers for capture devices. Using the values + * supplied by userspace thus wouldn't comply with the API. Until + * the API is updated force fixed values. + */ + pix->colorspace = RVIN_DEFAULT_COLORSPACE; + pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace); + pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace); + pix->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, pix->colorspace, + pix->ycbcr_enc); + + rvin_format_align(vin, pix); +} + +static int rvin_mc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct rvin_dev *vin = video_drvdata(file); + + rvin_mc_try_format(vin, &f->fmt.pix); + + return 0; +} + +static int rvin_mc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct rvin_dev *vin = video_drvdata(file); + + if (vb2_is_busy(&vin->queue)) + return -EBUSY; + + rvin_mc_try_format(vin, &f->fmt.pix); + + vin->format = f->fmt.pix; + + vin->crop.top = 0; + vin->crop.left = 0; + vin->crop.width = vin->format.width; + vin->crop.height = vin->format.height; + vin->compose = vin->crop; + + return 0; +} + +static const struct v4l2_ioctl_ops rvin_mc_ioctl_ops = { + .vidioc_querycap = rvin_querycap, + .vidioc_try_fmt_vid_cap = rvin_mc_try_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = rvin_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = rvin_mc_s_fmt_vid_cap, + .vidioc_enum_fmt_vid_cap = rvin_enum_fmt_vid_cap, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = rvin_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +/* ----------------------------------------------------------------------------- + * File Operations + */ + +static int rvin_power_parallel(struct rvin_dev *vin, bool on) +{ + struct v4l2_subdev *sd = vin_to_source(vin); + int power = on ? 1 : 0; + int ret; + + ret = v4l2_subdev_call(sd, core, s_power, power); + if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) + return ret; + + return 0; +} + +static int rvin_open(struct file *file) +{ + struct rvin_dev *vin = video_drvdata(file); + int ret; + + ret = pm_runtime_resume_and_get(vin->dev); + if (ret < 0) + return ret; + + ret = mutex_lock_interruptible(&vin->lock); + if (ret) + goto err_pm; + + file->private_data = vin; + + ret = v4l2_fh_open(file); + if (ret) + goto err_unlock; + + if (vin->info->use_mc) + ret = v4l2_pipeline_pm_get(&vin->vdev.entity); + else if (v4l2_fh_is_singular_file(file)) + ret = rvin_power_parallel(vin, true); + + if (ret < 0) + goto err_open; + + ret = v4l2_ctrl_handler_setup(&vin->ctrl_handler); + if (ret) + goto err_power; + + mutex_unlock(&vin->lock); + + return 0; +err_power: + if (vin->info->use_mc) + v4l2_pipeline_pm_put(&vin->vdev.entity); + else if (v4l2_fh_is_singular_file(file)) + rvin_power_parallel(vin, false); +err_open: + v4l2_fh_release(file); +err_unlock: + mutex_unlock(&vin->lock); +err_pm: + pm_runtime_put(vin->dev); + + return ret; +} + +static int rvin_release(struct file *file) +{ + struct rvin_dev *vin = video_drvdata(file); + bool fh_singular; + int ret; + + mutex_lock(&vin->lock); + + /* Save the singular status before we call the clean-up helper */ + fh_singular = v4l2_fh_is_singular_file(file); + + /* the release helper will cleanup any on-going streaming */ + ret = _vb2_fop_release(file, NULL); + + if (vin->info->use_mc) { + v4l2_pipeline_pm_put(&vin->vdev.entity); + } else { + if (fh_singular) + rvin_power_parallel(vin, false); + } + + mutex_unlock(&vin->lock); + + pm_runtime_put(vin->dev); + + return ret; +} + +static const struct v4l2_file_operations rvin_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = rvin_open, + .release = rvin_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, + .read = vb2_fop_read, +}; + +void rvin_v4l2_unregister(struct rvin_dev *vin) +{ + if (!video_is_registered(&vin->vdev)) + return; + + v4l2_info(&vin->v4l2_dev, "Removing %s\n", + video_device_node_name(&vin->vdev)); + + /* Checks internally if vdev have been init or not */ + video_unregister_device(&vin->vdev); +} + +static void rvin_notify_video_device(struct rvin_dev *vin, + unsigned int notification, void *arg) +{ + switch (notification) { + case V4L2_DEVICE_NOTIFY_EVENT: + v4l2_event_queue(&vin->vdev, arg); + break; + default: + break; + } +} + +static void rvin_notify(struct v4l2_subdev *sd, + unsigned int notification, void *arg) +{ + struct v4l2_subdev *remote; + struct rvin_group *group; + struct media_pad *pad; + struct rvin_dev *vin = + container_of(sd->v4l2_dev, struct rvin_dev, v4l2_dev); + unsigned int i; + + /* If no media controller, no need to route the event. */ + if (!vin->info->use_mc) { + rvin_notify_video_device(vin, notification, arg); + return; + } + + group = vin->group; + + for (i = 0; i < RCAR_VIN_NUM; i++) { + vin = group->vin[i]; + if (!vin) + continue; + + pad = media_pad_remote_pad_first(&vin->pad); + if (!pad) + continue; + + remote = media_entity_to_v4l2_subdev(pad->entity); + if (remote != sd) + continue; + + rvin_notify_video_device(vin, notification, arg); + } +} + +int rvin_v4l2_register(struct rvin_dev *vin) +{ + struct video_device *vdev = &vin->vdev; + int ret; + + vin->v4l2_dev.notify = rvin_notify; + + /* video node */ + vdev->v4l2_dev = &vin->v4l2_dev; + vdev->queue = &vin->queue; + snprintf(vdev->name, sizeof(vdev->name), "VIN%u output", vin->id); + vdev->release = video_device_release_empty; + vdev->lock = &vin->lock; + vdev->fops = &rvin_fops; + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | + V4L2_CAP_READWRITE; + + /* Set a default format */ + vin->format.pixelformat = RVIN_DEFAULT_FORMAT; + vin->format.width = RVIN_DEFAULT_WIDTH; + vin->format.height = RVIN_DEFAULT_HEIGHT; + vin->format.field = RVIN_DEFAULT_FIELD; + vin->format.colorspace = RVIN_DEFAULT_COLORSPACE; + + if (vin->info->use_mc) { + vdev->device_caps |= V4L2_CAP_IO_MC; + vdev->ioctl_ops = &rvin_mc_ioctl_ops; + } else { + vdev->ioctl_ops = &rvin_ioctl_ops; + rvin_reset_format(vin); + } + + rvin_format_align(vin, &vin->format); + + ret = video_register_device(&vin->vdev, VFL_TYPE_VIDEO, -1); + if (ret) { + vin_err(vin, "Failed to register video device\n"); + return ret; + } + + video_set_drvdata(&vin->vdev, vin); + + v4l2_info(&vin->v4l2_dev, "Device registered as %s\n", + video_device_node_name(&vin->vdev)); + + return ret; +} diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-vin.h b/drivers/media/platform/renesas/rcar-vin/rcar-vin.h new file mode 100644 index 000000000..1f94589d9 --- /dev/null +++ b/drivers/media/platform/renesas/rcar-vin/rcar-vin.h @@ -0,0 +1,315 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Driver for Renesas R-Car VIN + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2011-2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com> + * Copyright (C) 2008 Magnus Damm + * + * Based on the soc-camera rcar_vin driver + */ + +#ifndef __RCAR_VIN__ +#define __RCAR_VIN__ + +#include <linux/kref.h> + +#include <media/v4l2-async.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-device.h> +#include <media/v4l2-fwnode.h> +#include <media/videobuf2-v4l2.h> + +/* Number of HW buffers */ +#define HW_BUFFER_NUM 3 + +/* Address alignment mask for HW buffers */ +#define HW_BUFFER_MASK 0x7f + +/* Max number on VIN instances that can be in a system */ +#define RCAR_VIN_NUM 32 + +struct rvin_group; + +enum model_id { + RCAR_H1, + RCAR_M1, + RCAR_GEN2, + RCAR_GEN3, +}; + +enum rvin_csi_id { + RVIN_CSI20, + RVIN_CSI21, + RVIN_CSI40, + RVIN_CSI41, + RVIN_CSI_MAX, +}; + +enum rvin_isp_id { + RVIN_ISP0, + RVIN_ISP1, + RVIN_ISP2, + RVIN_ISP4, + RVIN_ISP_MAX, +}; + +#define RVIN_REMOTES_MAX \ + (((unsigned int)RVIN_CSI_MAX) > ((unsigned int)RVIN_ISP_MAX) ? \ + RVIN_CSI_MAX : RVIN_ISP_MAX) + +/** + * enum rvin_dma_state - DMA states + * @STOPPED: No operation in progress + * @STARTING: Capture starting up + * @RUNNING: Operation in progress have buffers + * @STOPPING: Stopping operation + * @SUSPENDED: Capture is suspended + */ +enum rvin_dma_state { + STOPPED = 0, + STARTING, + RUNNING, + STOPPING, + SUSPENDED, +}; + +/** + * enum rvin_buffer_type + * + * Describes how a buffer is given to the hardware. To be able + * to capture SEQ_TB/BT it's needed to capture to the same vb2 + * buffer twice so the type of buffer needs to be kept. + * + * @FULL: One capture fills the whole vb2 buffer + * @HALF_TOP: One capture fills the top half of the vb2 buffer + * @HALF_BOTTOM: One capture fills the bottom half of the vb2 buffer + */ +enum rvin_buffer_type { + FULL, + HALF_TOP, + HALF_BOTTOM, +}; + +/** + * struct rvin_video_format - Data format stored in memory + * @fourcc: Pixelformat + * @bpp: Bytes per pixel + */ +struct rvin_video_format { + u32 fourcc; + u8 bpp; +}; + +/** + * struct rvin_parallel_entity - Parallel video input endpoint descriptor + * @asd: sub-device descriptor for async framework + * @subdev: subdevice matched using async framework + * @mbus_type: media bus type + * @bus: media bus parallel configuration + * @source_pad: source pad of remote subdevice + * @sink_pad: sink pad of remote subdevice + * + */ +struct rvin_parallel_entity { + struct v4l2_async_subdev *asd; + struct v4l2_subdev *subdev; + + enum v4l2_mbus_type mbus_type; + struct v4l2_mbus_config_parallel bus; + + unsigned int source_pad; + unsigned int sink_pad; +}; + +/** + * struct rvin_group_route - describes a route from a channel of a + * CSI-2 receiver to a VIN + * + * @master: VIN group master ID. + * @csi: CSI-2 receiver ID. + * @chsel: CHSEL register values that connects VIN group to CSI-2. + * + * .. note:: + * Each R-Car CSI-2 receiver has four output channels facing the VIN + * devices, each channel can carry one CSI-2 Virtual Channel (VC). + * There is no correlation between channel number and CSI-2 VC. It's + * up to the CSI-2 receiver driver to configure which VC is output + * on which channel, the VIN devices only care about output channels. + */ +struct rvin_group_route { + unsigned int master; + enum rvin_csi_id csi; + unsigned int chsel; +}; + +/** + * struct rvin_info - Information about the particular VIN implementation + * @model: VIN model + * @use_mc: use media controller instead of controlling subdevice + * @use_isp: the VIN is connected to the ISP and not to the CSI-2 + * @nv12: support outputing NV12 pixel format + * @max_width: max input width the VIN supports + * @max_height: max input height the VIN supports + * @routes: list of possible routes from the CSI-2 recivers to + * all VINs. The list mush be NULL terminated. + */ +struct rvin_info { + enum model_id model; + bool use_mc; + bool use_isp; + bool nv12; + + unsigned int max_width; + unsigned int max_height; + const struct rvin_group_route *routes; +}; + +/** + * struct rvin_dev - Renesas VIN device structure + * @dev: (OF) device + * @base: device I/O register space remapped to virtual memory + * @info: info about VIN instance + * + * @vdev: V4L2 video device associated with VIN + * @v4l2_dev: V4L2 device + * @ctrl_handler: V4L2 control handler + * @notifier: V4L2 asynchronous subdevs notifier + * + * @parallel: parallel input subdevice descriptor + * + * @group: Gen3 CSI group + * @id: Gen3 group id for this VIN + * @pad: media pad for the video device entity + * + * @lock: protects @queue + * @queue: vb2 buffers queue + * @scratch: cpu address for scratch buffer + * @scratch_phys: physical address of the scratch buffer + * + * @qlock: protects @buf_hw, @buf_list, @sequence and @state + * @buf_hw: Keeps track of buffers given to HW slot + * @buf_list: list of queued buffers + * @sequence: V4L2 buffers sequence number + * @state: keeps track of operation state + * + * @is_csi: flag to mark the VIN as using a CSI-2 subdevice + * @chsel: Cached value of the current CSI-2 channel selection + * + * @mbus_code: media bus format code + * @format: active V4L2 pixel format + * + * @crop: active cropping + * @compose: active composing + * @src_rect: active size of the video source + * @std: active video standard of the video source + * + * @alpha: Alpha component to fill in for supported pixel formats + */ +struct rvin_dev { + struct device *dev; + void __iomem *base; + const struct rvin_info *info; + + struct video_device vdev; + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler ctrl_handler; + struct v4l2_async_notifier notifier; + + struct rvin_parallel_entity parallel; + + struct rvin_group *group; + unsigned int id; + struct media_pad pad; + + struct mutex lock; + struct vb2_queue queue; + void *scratch; + dma_addr_t scratch_phys; + + spinlock_t qlock; + struct { + struct vb2_v4l2_buffer *buffer; + enum rvin_buffer_type type; + dma_addr_t phys; + } buf_hw[HW_BUFFER_NUM]; + struct list_head buf_list; + unsigned int sequence; + enum rvin_dma_state state; + + bool is_csi; + unsigned int chsel; + + u32 mbus_code; + struct v4l2_pix_format format; + + struct v4l2_rect crop; + struct v4l2_rect compose; + struct v4l2_rect src_rect; + v4l2_std_id std; + + unsigned int alpha; +}; + +#define vin_to_source(vin) ((vin)->parallel.subdev) + +/* Debug */ +#define vin_dbg(d, fmt, arg...) dev_dbg(d->dev, fmt, ##arg) +#define vin_info(d, fmt, arg...) dev_info(d->dev, fmt, ##arg) +#define vin_warn(d, fmt, arg...) dev_warn(d->dev, fmt, ##arg) +#define vin_err(d, fmt, arg...) dev_err(d->dev, fmt, ##arg) + +/** + * struct rvin_group - VIN CSI2 group information + * @refcount: number of VIN instances using the group + * + * @mdev: media device which represents the group + * + * @lock: protects the count, notifier, vin and csi members + * @count: number of enabled VIN instances found in DT + * @notifier: group notifier for CSI-2 async subdevices + * @vin: VIN instances which are part of the group + * @link_setup: Callback to create all links for the media graph + * @remotes: array of pairs of fwnode and subdev pointers + * to all remote subdevices. + */ +struct rvin_group { + struct kref refcount; + + struct media_device mdev; + + struct mutex lock; + unsigned int count; + struct v4l2_async_notifier notifier; + struct rvin_dev *vin[RCAR_VIN_NUM]; + + int (*link_setup)(struct rvin_dev *vin); + + struct { + struct v4l2_async_subdev *asd; + struct v4l2_subdev *subdev; + } remotes[RVIN_REMOTES_MAX]; +}; + +int rvin_dma_register(struct rvin_dev *vin, int irq); +void rvin_dma_unregister(struct rvin_dev *vin); + +int rvin_v4l2_register(struct rvin_dev *vin); +void rvin_v4l2_unregister(struct rvin_dev *vin); + +const struct rvin_video_format *rvin_format_from_pixel(struct rvin_dev *vin, + u32 pixelformat); + + +/* Cropping, composing and scaling */ +void rvin_crop_scale_comp(struct rvin_dev *vin); + +int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel); +void rvin_set_alpha(struct rvin_dev *vin, unsigned int alpha); + +int rvin_start_streaming(struct rvin_dev *vin); +void rvin_stop_streaming(struct rvin_dev *vin); + +#endif diff --git a/drivers/media/platform/renesas/rcar_drif.c b/drivers/media/platform/renesas/rcar_drif.c new file mode 100644 index 000000000..3fec41f6e --- /dev/null +++ b/drivers/media/platform/renesas/rcar_drif.c @@ -0,0 +1,1487 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * R-Car Gen3 Digital Radio Interface (DRIF) driver + * + * Copyright (C) 2017 Renesas Electronics Corporation + */ + +/* + * The R-Car DRIF is a receive only MSIOF like controller with an + * external master device driving the SCK. It receives data into a FIFO, + * then this driver uses the SYS-DMAC engine to move the data from + * the device to memory. + * + * Each DRIF channel DRIFx (as per datasheet) contains two internal + * channels DRIFx0 & DRIFx1 within itself with each having its own resources + * like module clk, register set, irq and dma. These internal channels share + * common CLK & SYNC from master. The two data pins D0 & D1 shall be + * considered to represent the two internal channels. This internal split + * is not visible to the master device. + * + * Depending on the master device, a DRIF channel can use + * (1) both internal channels (D0 & D1) to receive data in parallel (or) + * (2) one internal channel (D0 or D1) to receive data + * + * The primary design goal of this controller is to act as a Digital Radio + * Interface that receives digital samples from a tuner device. Hence the + * driver exposes the device as a V4L2 SDR device. In order to qualify as + * a V4L2 SDR device, it should possess a tuner interface as mandated by the + * framework. This driver expects a tuner driver (sub-device) to bind + * asynchronously with this device and the combined drivers shall expose + * a V4L2 compliant SDR device. The DRIF driver is independent of the + * tuner vendor. + * + * The DRIF h/w can support I2S mode and Frame start synchronization pulse mode. + * This driver is tested for I2S mode only because of the availability of + * suitable master devices. Hence, not all configurable options of DRIF h/w + * like lsb/msb first, syncdl, dtdl etc. are exposed via DT and I2S defaults + * are used. These can be exposed later if needed after testing. + */ +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/ioctl.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of_graph.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <media/v4l2-async.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-v4l2.h> +#include <media/videobuf2-vmalloc.h> + +/* DRIF register offsets */ +#define RCAR_DRIF_SITMDR1 0x00 +#define RCAR_DRIF_SITMDR2 0x04 +#define RCAR_DRIF_SITMDR3 0x08 +#define RCAR_DRIF_SIRMDR1 0x10 +#define RCAR_DRIF_SIRMDR2 0x14 +#define RCAR_DRIF_SIRMDR3 0x18 +#define RCAR_DRIF_SICTR 0x28 +#define RCAR_DRIF_SIFCTR 0x30 +#define RCAR_DRIF_SISTR 0x40 +#define RCAR_DRIF_SIIER 0x44 +#define RCAR_DRIF_SIRFDR 0x60 + +#define RCAR_DRIF_RFOVF BIT(3) /* Receive FIFO overflow */ +#define RCAR_DRIF_RFUDF BIT(4) /* Receive FIFO underflow */ +#define RCAR_DRIF_RFSERR BIT(5) /* Receive frame sync error */ +#define RCAR_DRIF_REOF BIT(7) /* Frame reception end */ +#define RCAR_DRIF_RDREQ BIT(12) /* Receive data xfer req */ +#define RCAR_DRIF_RFFUL BIT(13) /* Receive FIFO full */ + +/* SIRMDR1 */ +#define RCAR_DRIF_SIRMDR1_SYNCMD_FRAME (0 << 28) +#define RCAR_DRIF_SIRMDR1_SYNCMD_LR (3 << 28) + +#define RCAR_DRIF_SIRMDR1_SYNCAC_POL_HIGH (0 << 25) +#define RCAR_DRIF_SIRMDR1_SYNCAC_POL_LOW (1 << 25) + +#define RCAR_DRIF_SIRMDR1_MSB_FIRST (0 << 24) +#define RCAR_DRIF_SIRMDR1_LSB_FIRST (1 << 24) + +#define RCAR_DRIF_SIRMDR1_DTDL_0 (0 << 20) +#define RCAR_DRIF_SIRMDR1_DTDL_1 (1 << 20) +#define RCAR_DRIF_SIRMDR1_DTDL_2 (2 << 20) +#define RCAR_DRIF_SIRMDR1_DTDL_0PT5 (5 << 20) +#define RCAR_DRIF_SIRMDR1_DTDL_1PT5 (6 << 20) + +#define RCAR_DRIF_SIRMDR1_SYNCDL_0 (0 << 20) +#define RCAR_DRIF_SIRMDR1_SYNCDL_1 (1 << 20) +#define RCAR_DRIF_SIRMDR1_SYNCDL_2 (2 << 20) +#define RCAR_DRIF_SIRMDR1_SYNCDL_3 (3 << 20) +#define RCAR_DRIF_SIRMDR1_SYNCDL_0PT5 (5 << 20) +#define RCAR_DRIF_SIRMDR1_SYNCDL_1PT5 (6 << 20) + +#define RCAR_DRIF_MDR_GRPCNT(n) (((n) - 1) << 30) +#define RCAR_DRIF_MDR_BITLEN(n) (((n) - 1) << 24) +#define RCAR_DRIF_MDR_WDCNT(n) (((n) - 1) << 16) + +/* Hidden Transmit register that controls CLK & SYNC */ +#define RCAR_DRIF_SITMDR1_PCON BIT(30) + +#define RCAR_DRIF_SICTR_RX_RISING_EDGE BIT(26) +#define RCAR_DRIF_SICTR_RX_EN BIT(8) +#define RCAR_DRIF_SICTR_RESET BIT(0) + +/* Constants */ +#define RCAR_DRIF_NUM_HWBUFS 32 +#define RCAR_DRIF_MAX_DEVS 4 +#define RCAR_DRIF_DEFAULT_NUM_HWBUFS 16 +#define RCAR_DRIF_DEFAULT_HWBUF_SIZE (4 * PAGE_SIZE) +#define RCAR_DRIF_MAX_CHANNEL 2 +#define RCAR_SDR_BUFFER_SIZE SZ_64K + +/* Internal buffer status flags */ +#define RCAR_DRIF_BUF_DONE BIT(0) /* DMA completed */ +#define RCAR_DRIF_BUF_OVERFLOW BIT(1) /* Overflow detected */ + +#define to_rcar_drif_buf_pair(sdr, ch_num, idx) \ + (&((sdr)->ch[!(ch_num)]->buf[(idx)])) + +#define for_each_rcar_drif_channel(ch, ch_mask) \ + for_each_set_bit(ch, ch_mask, RCAR_DRIF_MAX_CHANNEL) + +/* Debug */ +#define rdrif_dbg(sdr, fmt, arg...) \ + dev_dbg(sdr->v4l2_dev.dev, fmt, ## arg) + +#define rdrif_err(sdr, fmt, arg...) \ + dev_err(sdr->v4l2_dev.dev, fmt, ## arg) + +/* Stream formats */ +struct rcar_drif_format { + u32 pixelformat; + u32 buffersize; + u32 bitlen; + u32 wdcnt; + u32 num_ch; +}; + +/* Format descriptions for capture */ +static const struct rcar_drif_format formats[] = { + { + .pixelformat = V4L2_SDR_FMT_PCU16BE, + .buffersize = RCAR_SDR_BUFFER_SIZE, + .bitlen = 16, + .wdcnt = 1, + .num_ch = 2, + }, + { + .pixelformat = V4L2_SDR_FMT_PCU18BE, + .buffersize = RCAR_SDR_BUFFER_SIZE, + .bitlen = 18, + .wdcnt = 1, + .num_ch = 2, + }, + { + .pixelformat = V4L2_SDR_FMT_PCU20BE, + .buffersize = RCAR_SDR_BUFFER_SIZE, + .bitlen = 20, + .wdcnt = 1, + .num_ch = 2, + }, +}; + +/* Buffer for a received frame from one or both internal channels */ +struct rcar_drif_frame_buf { + /* Common v4l buffer stuff -- must be first */ + struct vb2_v4l2_buffer vb; + struct list_head list; +}; + +/* OF graph endpoint's V4L2 async data */ +struct rcar_drif_graph_ep { + struct v4l2_subdev *subdev; /* Async matched subdev */ +}; + +/* DMA buffer */ +struct rcar_drif_hwbuf { + void *addr; /* CPU-side address */ + unsigned int status; /* Buffer status flags */ +}; + +/* Internal channel */ +struct rcar_drif { + struct rcar_drif_sdr *sdr; /* Group device */ + struct platform_device *pdev; /* Channel's pdev */ + void __iomem *base; /* Base register address */ + resource_size_t start; /* I/O resource offset */ + struct dma_chan *dmach; /* Reserved DMA channel */ + struct clk *clk; /* Module clock */ + struct rcar_drif_hwbuf buf[RCAR_DRIF_NUM_HWBUFS]; /* H/W bufs */ + dma_addr_t dma_handle; /* Handle for all bufs */ + unsigned int num; /* Channel number */ + bool acting_sdr; /* Channel acting as SDR device */ +}; + +/* DRIF V4L2 SDR */ +struct rcar_drif_sdr { + struct device *dev; /* Platform device */ + struct video_device *vdev; /* V4L2 SDR device */ + struct v4l2_device v4l2_dev; /* V4L2 device */ + + /* Videobuf2 queue and queued buffers list */ + struct vb2_queue vb_queue; + struct list_head queued_bufs; + spinlock_t queued_bufs_lock; /* Protects queued_bufs */ + spinlock_t dma_lock; /* To serialize DMA cb of channels */ + + struct mutex v4l2_mutex; /* To serialize ioctls */ + struct mutex vb_queue_mutex; /* To serialize streaming ioctls */ + struct v4l2_ctrl_handler ctrl_hdl; /* SDR control handler */ + struct v4l2_async_notifier notifier; /* For subdev (tuner) */ + struct rcar_drif_graph_ep ep; /* Endpoint V4L2 async data */ + + /* Current V4L2 SDR format ptr */ + const struct rcar_drif_format *fmt; + + /* Device tree SYNC properties */ + u32 mdr1; + + /* Internals */ + struct rcar_drif *ch[RCAR_DRIF_MAX_CHANNEL]; /* DRIFx0,1 */ + unsigned long hw_ch_mask; /* Enabled channels per DT */ + unsigned long cur_ch_mask; /* Used channels for an SDR FMT */ + u32 num_hw_ch; /* Num of DT enabled channels */ + u32 num_cur_ch; /* Num of used channels */ + u32 hwbuf_size; /* Each DMA buffer size */ + u32 produced; /* Buffers produced by sdr dev */ +}; + +/* Register access functions */ +static void rcar_drif_write(struct rcar_drif *ch, u32 offset, u32 data) +{ + writel(data, ch->base + offset); +} + +static u32 rcar_drif_read(struct rcar_drif *ch, u32 offset) +{ + return readl(ch->base + offset); +} + +/* Release DMA channels */ +static void rcar_drif_release_dmachannels(struct rcar_drif_sdr *sdr) +{ + unsigned int i; + + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) + if (sdr->ch[i]->dmach) { + dma_release_channel(sdr->ch[i]->dmach); + sdr->ch[i]->dmach = NULL; + } +} + +/* Allocate DMA channels */ +static int rcar_drif_alloc_dmachannels(struct rcar_drif_sdr *sdr) +{ + struct dma_slave_config dma_cfg; + unsigned int i; + int ret; + + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + struct rcar_drif *ch = sdr->ch[i]; + + ch->dmach = dma_request_chan(&ch->pdev->dev, "rx"); + if (IS_ERR(ch->dmach)) { + ret = PTR_ERR(ch->dmach); + if (ret != -EPROBE_DEFER) + rdrif_err(sdr, + "ch%u: dma channel req failed: %pe\n", + i, ch->dmach); + ch->dmach = NULL; + goto dmach_error; + } + + /* Configure slave */ + memset(&dma_cfg, 0, sizeof(dma_cfg)); + dma_cfg.src_addr = (phys_addr_t)(ch->start + RCAR_DRIF_SIRFDR); + dma_cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + ret = dmaengine_slave_config(ch->dmach, &dma_cfg); + if (ret) { + rdrif_err(sdr, "ch%u: dma slave config failed\n", i); + goto dmach_error; + } + } + return 0; + +dmach_error: + rcar_drif_release_dmachannels(sdr); + return ret; +} + +/* Release queued vb2 buffers */ +static void rcar_drif_release_queued_bufs(struct rcar_drif_sdr *sdr, + enum vb2_buffer_state state) +{ + struct rcar_drif_frame_buf *fbuf, *tmp; + unsigned long flags; + + spin_lock_irqsave(&sdr->queued_bufs_lock, flags); + list_for_each_entry_safe(fbuf, tmp, &sdr->queued_bufs, list) { + list_del(&fbuf->list); + vb2_buffer_done(&fbuf->vb.vb2_buf, state); + } + spin_unlock_irqrestore(&sdr->queued_bufs_lock, flags); +} + +/* Set MDR defaults */ +static inline void rcar_drif_set_mdr1(struct rcar_drif_sdr *sdr) +{ + unsigned int i; + + /* Set defaults for enabled internal channels */ + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + /* Refer MSIOF section in manual for this register setting */ + rcar_drif_write(sdr->ch[i], RCAR_DRIF_SITMDR1, + RCAR_DRIF_SITMDR1_PCON); + + /* Setup MDR1 value */ + rcar_drif_write(sdr->ch[i], RCAR_DRIF_SIRMDR1, sdr->mdr1); + + rdrif_dbg(sdr, "ch%u: mdr1 = 0x%08x", + i, rcar_drif_read(sdr->ch[i], RCAR_DRIF_SIRMDR1)); + } +} + +/* Set DRIF receive format */ +static int rcar_drif_set_format(struct rcar_drif_sdr *sdr) +{ + unsigned int i; + + rdrif_dbg(sdr, "setfmt: bitlen %u wdcnt %u num_ch %u\n", + sdr->fmt->bitlen, sdr->fmt->wdcnt, sdr->fmt->num_ch); + + /* Sanity check */ + if (sdr->fmt->num_ch > sdr->num_cur_ch) { + rdrif_err(sdr, "fmt num_ch %u cur_ch %u mismatch\n", + sdr->fmt->num_ch, sdr->num_cur_ch); + return -EINVAL; + } + + /* Setup group, bitlen & wdcnt */ + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + u32 mdr; + + /* Two groups */ + mdr = RCAR_DRIF_MDR_GRPCNT(2) | + RCAR_DRIF_MDR_BITLEN(sdr->fmt->bitlen) | + RCAR_DRIF_MDR_WDCNT(sdr->fmt->wdcnt); + rcar_drif_write(sdr->ch[i], RCAR_DRIF_SIRMDR2, mdr); + + mdr = RCAR_DRIF_MDR_BITLEN(sdr->fmt->bitlen) | + RCAR_DRIF_MDR_WDCNT(sdr->fmt->wdcnt); + rcar_drif_write(sdr->ch[i], RCAR_DRIF_SIRMDR3, mdr); + + rdrif_dbg(sdr, "ch%u: new mdr[2,3] = 0x%08x, 0x%08x\n", + i, rcar_drif_read(sdr->ch[i], RCAR_DRIF_SIRMDR2), + rcar_drif_read(sdr->ch[i], RCAR_DRIF_SIRMDR3)); + } + return 0; +} + +/* Release DMA buffers */ +static void rcar_drif_release_buf(struct rcar_drif_sdr *sdr) +{ + unsigned int i; + + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + struct rcar_drif *ch = sdr->ch[i]; + + /* First entry contains the dma buf ptr */ + if (ch->buf[0].addr) { + dma_free_coherent(&ch->pdev->dev, + sdr->hwbuf_size * RCAR_DRIF_NUM_HWBUFS, + ch->buf[0].addr, ch->dma_handle); + ch->buf[0].addr = NULL; + } + } +} + +/* Request DMA buffers */ +static int rcar_drif_request_buf(struct rcar_drif_sdr *sdr) +{ + int ret = -ENOMEM; + unsigned int i, j; + void *addr; + + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + struct rcar_drif *ch = sdr->ch[i]; + + /* Allocate DMA buffers */ + addr = dma_alloc_coherent(&ch->pdev->dev, + sdr->hwbuf_size * RCAR_DRIF_NUM_HWBUFS, + &ch->dma_handle, GFP_KERNEL); + if (!addr) { + rdrif_err(sdr, + "ch%u: dma alloc failed. num hwbufs %u size %u\n", + i, RCAR_DRIF_NUM_HWBUFS, sdr->hwbuf_size); + goto error; + } + + /* Split the chunk and populate bufctxt */ + for (j = 0; j < RCAR_DRIF_NUM_HWBUFS; j++) { + ch->buf[j].addr = addr + (j * sdr->hwbuf_size); + ch->buf[j].status = 0; + } + } + return 0; +error: + return ret; +} + +/* Setup vb_queue minimum buffer requirements */ +static int rcar_drif_queue_setup(struct vb2_queue *vq, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], struct device *alloc_devs[]) +{ + struct rcar_drif_sdr *sdr = vb2_get_drv_priv(vq); + + /* Need at least 16 buffers */ + if (vq->num_buffers + *num_buffers < 16) + *num_buffers = 16 - vq->num_buffers; + + *num_planes = 1; + sizes[0] = PAGE_ALIGN(sdr->fmt->buffersize); + rdrif_dbg(sdr, "num_bufs %d sizes[0] %d\n", *num_buffers, sizes[0]); + + return 0; +} + +/* Enqueue buffer */ +static void rcar_drif_buf_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct rcar_drif_sdr *sdr = vb2_get_drv_priv(vb->vb2_queue); + struct rcar_drif_frame_buf *fbuf = + container_of(vbuf, struct rcar_drif_frame_buf, vb); + unsigned long flags; + + rdrif_dbg(sdr, "buf_queue idx %u\n", vb->index); + spin_lock_irqsave(&sdr->queued_bufs_lock, flags); + list_add_tail(&fbuf->list, &sdr->queued_bufs); + spin_unlock_irqrestore(&sdr->queued_bufs_lock, flags); +} + +/* Get a frame buf from list */ +static struct rcar_drif_frame_buf * +rcar_drif_get_fbuf(struct rcar_drif_sdr *sdr) +{ + struct rcar_drif_frame_buf *fbuf; + unsigned long flags; + + spin_lock_irqsave(&sdr->queued_bufs_lock, flags); + fbuf = list_first_entry_or_null(&sdr->queued_bufs, struct + rcar_drif_frame_buf, list); + if (!fbuf) { + /* + * App is late in enqueing buffers. Samples lost & there will + * be a gap in sequence number when app recovers + */ + rdrif_dbg(sdr, "\napp late: prod %u\n", sdr->produced); + spin_unlock_irqrestore(&sdr->queued_bufs_lock, flags); + return NULL; + } + list_del(&fbuf->list); + spin_unlock_irqrestore(&sdr->queued_bufs_lock, flags); + + return fbuf; +} + +/* Helpers to set/clear buf pair status */ +static inline bool rcar_drif_bufs_done(struct rcar_drif_hwbuf **buf) +{ + return (buf[0]->status & buf[1]->status & RCAR_DRIF_BUF_DONE); +} + +static inline bool rcar_drif_bufs_overflow(struct rcar_drif_hwbuf **buf) +{ + return ((buf[0]->status | buf[1]->status) & RCAR_DRIF_BUF_OVERFLOW); +} + +static inline void rcar_drif_bufs_clear(struct rcar_drif_hwbuf **buf, + unsigned int bit) +{ + unsigned int i; + + for (i = 0; i < RCAR_DRIF_MAX_CHANNEL; i++) + buf[i]->status &= ~bit; +} + +/* Channel DMA complete */ +static void rcar_drif_channel_complete(struct rcar_drif *ch, u32 idx) +{ + u32 str; + + ch->buf[idx].status |= RCAR_DRIF_BUF_DONE; + + /* Check for DRIF errors */ + str = rcar_drif_read(ch, RCAR_DRIF_SISTR); + if (unlikely(str & RCAR_DRIF_RFOVF)) { + /* Writing the same clears it */ + rcar_drif_write(ch, RCAR_DRIF_SISTR, str); + + /* Overflow: some samples are lost */ + ch->buf[idx].status |= RCAR_DRIF_BUF_OVERFLOW; + } +} + +/* DMA callback for each stage */ +static void rcar_drif_dma_complete(void *dma_async_param) +{ + struct rcar_drif *ch = dma_async_param; + struct rcar_drif_sdr *sdr = ch->sdr; + struct rcar_drif_hwbuf *buf[RCAR_DRIF_MAX_CHANNEL]; + struct rcar_drif_frame_buf *fbuf; + bool overflow = false; + u32 idx, produced; + unsigned int i; + + spin_lock(&sdr->dma_lock); + + /* DMA can be terminated while the callback was waiting on lock */ + if (!vb2_is_streaming(&sdr->vb_queue)) { + spin_unlock(&sdr->dma_lock); + return; + } + + idx = sdr->produced % RCAR_DRIF_NUM_HWBUFS; + rcar_drif_channel_complete(ch, idx); + + if (sdr->num_cur_ch == RCAR_DRIF_MAX_CHANNEL) { + buf[0] = ch->num ? to_rcar_drif_buf_pair(sdr, ch->num, idx) : + &ch->buf[idx]; + buf[1] = ch->num ? &ch->buf[idx] : + to_rcar_drif_buf_pair(sdr, ch->num, idx); + + /* Check if both DMA buffers are done */ + if (!rcar_drif_bufs_done(buf)) { + spin_unlock(&sdr->dma_lock); + return; + } + + /* Clear buf done status */ + rcar_drif_bufs_clear(buf, RCAR_DRIF_BUF_DONE); + + if (rcar_drif_bufs_overflow(buf)) { + overflow = true; + /* Clear the flag in status */ + rcar_drif_bufs_clear(buf, RCAR_DRIF_BUF_OVERFLOW); + } + } else { + buf[0] = &ch->buf[idx]; + if (buf[0]->status & RCAR_DRIF_BUF_OVERFLOW) { + overflow = true; + /* Clear the flag in status */ + buf[0]->status &= ~RCAR_DRIF_BUF_OVERFLOW; + } + } + + /* Buffer produced for consumption */ + produced = sdr->produced++; + spin_unlock(&sdr->dma_lock); + + rdrif_dbg(sdr, "ch%u: prod %u\n", ch->num, produced); + + /* Get fbuf */ + fbuf = rcar_drif_get_fbuf(sdr); + if (!fbuf) + return; + + for (i = 0; i < RCAR_DRIF_MAX_CHANNEL; i++) + memcpy(vb2_plane_vaddr(&fbuf->vb.vb2_buf, 0) + + i * sdr->hwbuf_size, buf[i]->addr, sdr->hwbuf_size); + + fbuf->vb.field = V4L2_FIELD_NONE; + fbuf->vb.sequence = produced; + fbuf->vb.vb2_buf.timestamp = ktime_get_ns(); + vb2_set_plane_payload(&fbuf->vb.vb2_buf, 0, sdr->fmt->buffersize); + + /* Set error state on overflow */ + vb2_buffer_done(&fbuf->vb.vb2_buf, + overflow ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE); +} + +static int rcar_drif_qbuf(struct rcar_drif *ch) +{ + struct rcar_drif_sdr *sdr = ch->sdr; + dma_addr_t addr = ch->dma_handle; + struct dma_async_tx_descriptor *rxd; + dma_cookie_t cookie; + int ret = -EIO; + + /* Setup cyclic DMA with given buffers */ + rxd = dmaengine_prep_dma_cyclic(ch->dmach, addr, + sdr->hwbuf_size * RCAR_DRIF_NUM_HWBUFS, + sdr->hwbuf_size, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!rxd) { + rdrif_err(sdr, "ch%u: prep dma cyclic failed\n", ch->num); + return ret; + } + + /* Submit descriptor */ + rxd->callback = rcar_drif_dma_complete; + rxd->callback_param = ch; + cookie = dmaengine_submit(rxd); + if (dma_submit_error(cookie)) { + rdrif_err(sdr, "ch%u: dma submit failed\n", ch->num); + return ret; + } + + dma_async_issue_pending(ch->dmach); + return 0; +} + +/* Enable reception */ +static int rcar_drif_enable_rx(struct rcar_drif_sdr *sdr) +{ + unsigned int i; + u32 ctr; + int ret = -EINVAL; + + /* + * When both internal channels are enabled, they can be synchronized + * only by the master + */ + + /* Enable receive */ + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + ctr = rcar_drif_read(sdr->ch[i], RCAR_DRIF_SICTR); + ctr |= (RCAR_DRIF_SICTR_RX_RISING_EDGE | + RCAR_DRIF_SICTR_RX_EN); + rcar_drif_write(sdr->ch[i], RCAR_DRIF_SICTR, ctr); + } + + /* Check receive enabled */ + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + ret = readl_poll_timeout(sdr->ch[i]->base + RCAR_DRIF_SICTR, + ctr, ctr & RCAR_DRIF_SICTR_RX_EN, 7, 100000); + if (ret) { + rdrif_err(sdr, "ch%u: rx en failed. ctr 0x%08x\n", i, + rcar_drif_read(sdr->ch[i], RCAR_DRIF_SICTR)); + break; + } + } + return ret; +} + +/* Disable reception */ +static void rcar_drif_disable_rx(struct rcar_drif_sdr *sdr) +{ + unsigned int i; + u32 ctr; + int ret; + + /* Disable receive */ + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + ctr = rcar_drif_read(sdr->ch[i], RCAR_DRIF_SICTR); + ctr &= ~RCAR_DRIF_SICTR_RX_EN; + rcar_drif_write(sdr->ch[i], RCAR_DRIF_SICTR, ctr); + } + + /* Check receive disabled */ + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + ret = readl_poll_timeout(sdr->ch[i]->base + RCAR_DRIF_SICTR, + ctr, !(ctr & RCAR_DRIF_SICTR_RX_EN), 7, 100000); + if (ret) + dev_warn(&sdr->vdev->dev, + "ch%u: failed to disable rx. ctr 0x%08x\n", + i, rcar_drif_read(sdr->ch[i], RCAR_DRIF_SICTR)); + } +} + +/* Stop channel */ +static void rcar_drif_stop_channel(struct rcar_drif *ch) +{ + /* Disable DMA receive interrupt */ + rcar_drif_write(ch, RCAR_DRIF_SIIER, 0x00000000); + + /* Terminate all DMA transfers */ + dmaengine_terminate_sync(ch->dmach); +} + +/* Stop receive operation */ +static void rcar_drif_stop(struct rcar_drif_sdr *sdr) +{ + unsigned int i; + + /* Disable Rx */ + rcar_drif_disable_rx(sdr); + + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) + rcar_drif_stop_channel(sdr->ch[i]); +} + +/* Start channel */ +static int rcar_drif_start_channel(struct rcar_drif *ch) +{ + struct rcar_drif_sdr *sdr = ch->sdr; + u32 ctr, str; + int ret; + + /* Reset receive */ + rcar_drif_write(ch, RCAR_DRIF_SICTR, RCAR_DRIF_SICTR_RESET); + ret = readl_poll_timeout(ch->base + RCAR_DRIF_SICTR, ctr, + !(ctr & RCAR_DRIF_SICTR_RESET), 7, 100000); + if (ret) { + rdrif_err(sdr, "ch%u: failed to reset rx. ctr 0x%08x\n", + ch->num, rcar_drif_read(ch, RCAR_DRIF_SICTR)); + return ret; + } + + /* Queue buffers for DMA */ + ret = rcar_drif_qbuf(ch); + if (ret) + return ret; + + /* Clear status register flags */ + str = RCAR_DRIF_RFFUL | RCAR_DRIF_REOF | RCAR_DRIF_RFSERR | + RCAR_DRIF_RFUDF | RCAR_DRIF_RFOVF; + rcar_drif_write(ch, RCAR_DRIF_SISTR, str); + + /* Enable DMA receive interrupt */ + rcar_drif_write(ch, RCAR_DRIF_SIIER, 0x00009000); + + return ret; +} + +/* Start receive operation */ +static int rcar_drif_start(struct rcar_drif_sdr *sdr) +{ + unsigned long enabled = 0; + unsigned int i; + int ret; + + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + ret = rcar_drif_start_channel(sdr->ch[i]); + if (ret) + goto start_error; + enabled |= BIT(i); + } + + ret = rcar_drif_enable_rx(sdr); + if (ret) + goto enable_error; + + sdr->produced = 0; + return ret; + +enable_error: + rcar_drif_disable_rx(sdr); +start_error: + for_each_rcar_drif_channel(i, &enabled) + rcar_drif_stop_channel(sdr->ch[i]); + + return ret; +} + +/* Start streaming */ +static int rcar_drif_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct rcar_drif_sdr *sdr = vb2_get_drv_priv(vq); + unsigned long enabled = 0; + unsigned int i; + int ret; + + mutex_lock(&sdr->v4l2_mutex); + + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) { + ret = clk_prepare_enable(sdr->ch[i]->clk); + if (ret) + goto error; + enabled |= BIT(i); + } + + /* Set default MDRx settings */ + rcar_drif_set_mdr1(sdr); + + /* Set new format */ + ret = rcar_drif_set_format(sdr); + if (ret) + goto error; + + if (sdr->num_cur_ch == RCAR_DRIF_MAX_CHANNEL) + sdr->hwbuf_size = sdr->fmt->buffersize / RCAR_DRIF_MAX_CHANNEL; + else + sdr->hwbuf_size = sdr->fmt->buffersize; + + rdrif_dbg(sdr, "num hwbufs %u, hwbuf_size %u\n", + RCAR_DRIF_NUM_HWBUFS, sdr->hwbuf_size); + + /* Alloc DMA channel */ + ret = rcar_drif_alloc_dmachannels(sdr); + if (ret) + goto error; + + /* Request buffers */ + ret = rcar_drif_request_buf(sdr); + if (ret) + goto error; + + /* Start Rx */ + ret = rcar_drif_start(sdr); + if (ret) + goto error; + + mutex_unlock(&sdr->v4l2_mutex); + + return ret; + +error: + rcar_drif_release_queued_bufs(sdr, VB2_BUF_STATE_QUEUED); + rcar_drif_release_buf(sdr); + rcar_drif_release_dmachannels(sdr); + for_each_rcar_drif_channel(i, &enabled) + clk_disable_unprepare(sdr->ch[i]->clk); + + mutex_unlock(&sdr->v4l2_mutex); + + return ret; +} + +/* Stop streaming */ +static void rcar_drif_stop_streaming(struct vb2_queue *vq) +{ + struct rcar_drif_sdr *sdr = vb2_get_drv_priv(vq); + unsigned int i; + + mutex_lock(&sdr->v4l2_mutex); + + /* Stop hardware streaming */ + rcar_drif_stop(sdr); + + /* Return all queued buffers to vb2 */ + rcar_drif_release_queued_bufs(sdr, VB2_BUF_STATE_ERROR); + + /* Release buf */ + rcar_drif_release_buf(sdr); + + /* Release DMA channel resources */ + rcar_drif_release_dmachannels(sdr); + + for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) + clk_disable_unprepare(sdr->ch[i]->clk); + + mutex_unlock(&sdr->v4l2_mutex); +} + +/* Vb2 ops */ +static const struct vb2_ops rcar_drif_vb2_ops = { + .queue_setup = rcar_drif_queue_setup, + .buf_queue = rcar_drif_buf_queue, + .start_streaming = rcar_drif_start_streaming, + .stop_streaming = rcar_drif_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +static int rcar_drif_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct rcar_drif_sdr *sdr = video_drvdata(file); + + strscpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver)); + strscpy(cap->card, sdr->vdev->name, sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", + sdr->vdev->name); + + return 0; +} + +static int rcar_drif_set_default_format(struct rcar_drif_sdr *sdr) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) { + /* Matching fmt based on required channels is set as default */ + if (sdr->num_hw_ch == formats[i].num_ch) { + sdr->fmt = &formats[i]; + sdr->cur_ch_mask = sdr->hw_ch_mask; + sdr->num_cur_ch = sdr->num_hw_ch; + dev_dbg(sdr->dev, "default fmt[%u]: mask %lu num %u\n", + i, sdr->cur_ch_mask, sdr->num_cur_ch); + return 0; + } + } + return -EINVAL; +} + +static int rcar_drif_enum_fmt_sdr_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index >= ARRAY_SIZE(formats)) + return -EINVAL; + + f->pixelformat = formats[f->index].pixelformat; + + return 0; +} + +static int rcar_drif_g_fmt_sdr_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct rcar_drif_sdr *sdr = video_drvdata(file); + + f->fmt.sdr.pixelformat = sdr->fmt->pixelformat; + f->fmt.sdr.buffersize = sdr->fmt->buffersize; + + return 0; +} + +static int rcar_drif_s_fmt_sdr_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct rcar_drif_sdr *sdr = video_drvdata(file); + struct vb2_queue *q = &sdr->vb_queue; + unsigned int i; + + if (vb2_is_busy(q)) + return -EBUSY; + + for (i = 0; i < ARRAY_SIZE(formats); i++) { + if (formats[i].pixelformat == f->fmt.sdr.pixelformat) + break; + } + + if (i == ARRAY_SIZE(formats)) + i = 0; /* Set the 1st format as default on no match */ + + sdr->fmt = &formats[i]; + f->fmt.sdr.pixelformat = sdr->fmt->pixelformat; + f->fmt.sdr.buffersize = formats[i].buffersize; + memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved)); + + /* + * If a format demands one channel only out of two + * enabled channels, pick the 0th channel. + */ + if (formats[i].num_ch < sdr->num_hw_ch) { + sdr->cur_ch_mask = BIT(0); + sdr->num_cur_ch = formats[i].num_ch; + } else { + sdr->cur_ch_mask = sdr->hw_ch_mask; + sdr->num_cur_ch = sdr->num_hw_ch; + } + + rdrif_dbg(sdr, "cur: idx %u mask %lu num %u\n", + i, sdr->cur_ch_mask, sdr->num_cur_ch); + + return 0; +} + +static int rcar_drif_try_fmt_sdr_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) { + if (formats[i].pixelformat == f->fmt.sdr.pixelformat) { + f->fmt.sdr.buffersize = formats[i].buffersize; + return 0; + } + } + + f->fmt.sdr.pixelformat = formats[0].pixelformat; + f->fmt.sdr.buffersize = formats[0].buffersize; + memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved)); + + return 0; +} + +/* Tuner subdev ioctls */ +static int rcar_drif_enum_freq_bands(struct file *file, void *priv, + struct v4l2_frequency_band *band) +{ + struct rcar_drif_sdr *sdr = video_drvdata(file); + + return v4l2_subdev_call(sdr->ep.subdev, tuner, enum_freq_bands, band); +} + +static int rcar_drif_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct rcar_drif_sdr *sdr = video_drvdata(file); + + return v4l2_subdev_call(sdr->ep.subdev, tuner, g_frequency, f); +} + +static int rcar_drif_s_frequency(struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + struct rcar_drif_sdr *sdr = video_drvdata(file); + + return v4l2_subdev_call(sdr->ep.subdev, tuner, s_frequency, f); +} + +static int rcar_drif_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *vt) +{ + struct rcar_drif_sdr *sdr = video_drvdata(file); + + return v4l2_subdev_call(sdr->ep.subdev, tuner, g_tuner, vt); +} + +static int rcar_drif_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *vt) +{ + struct rcar_drif_sdr *sdr = video_drvdata(file); + + return v4l2_subdev_call(sdr->ep.subdev, tuner, s_tuner, vt); +} + +static const struct v4l2_ioctl_ops rcar_drif_ioctl_ops = { + .vidioc_querycap = rcar_drif_querycap, + + .vidioc_enum_fmt_sdr_cap = rcar_drif_enum_fmt_sdr_cap, + .vidioc_g_fmt_sdr_cap = rcar_drif_g_fmt_sdr_cap, + .vidioc_s_fmt_sdr_cap = rcar_drif_s_fmt_sdr_cap, + .vidioc_try_fmt_sdr_cap = rcar_drif_try_fmt_sdr_cap, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_s_frequency = rcar_drif_s_frequency, + .vidioc_g_frequency = rcar_drif_g_frequency, + .vidioc_s_tuner = rcar_drif_s_tuner, + .vidioc_g_tuner = rcar_drif_g_tuner, + .vidioc_enum_freq_bands = rcar_drif_enum_freq_bands, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, + .vidioc_log_status = v4l2_ctrl_log_status, +}; + +static const struct v4l2_file_operations rcar_drif_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .read = vb2_fop_read, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, + .unlocked_ioctl = video_ioctl2, +}; + +static int rcar_drif_sdr_register(struct rcar_drif_sdr *sdr) +{ + int ret; + + /* Init video_device structure */ + sdr->vdev = video_device_alloc(); + if (!sdr->vdev) + return -ENOMEM; + + snprintf(sdr->vdev->name, sizeof(sdr->vdev->name), "R-Car DRIF"); + sdr->vdev->fops = &rcar_drif_fops; + sdr->vdev->ioctl_ops = &rcar_drif_ioctl_ops; + sdr->vdev->release = video_device_release; + sdr->vdev->lock = &sdr->v4l2_mutex; + sdr->vdev->queue = &sdr->vb_queue; + sdr->vdev->queue->lock = &sdr->vb_queue_mutex; + sdr->vdev->ctrl_handler = &sdr->ctrl_hdl; + sdr->vdev->v4l2_dev = &sdr->v4l2_dev; + sdr->vdev->device_caps = V4L2_CAP_SDR_CAPTURE | V4L2_CAP_TUNER | + V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; + video_set_drvdata(sdr->vdev, sdr); + + /* Register V4L2 SDR device */ + ret = video_register_device(sdr->vdev, VFL_TYPE_SDR, -1); + if (ret) { + video_device_release(sdr->vdev); + sdr->vdev = NULL; + dev_err(sdr->dev, "failed video_register_device (%d)\n", ret); + } + + return ret; +} + +static void rcar_drif_sdr_unregister(struct rcar_drif_sdr *sdr) +{ + video_unregister_device(sdr->vdev); + sdr->vdev = NULL; +} + +/* Sub-device bound callback */ +static int rcar_drif_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct rcar_drif_sdr *sdr = + container_of(notifier, struct rcar_drif_sdr, notifier); + + v4l2_set_subdev_hostdata(subdev, sdr); + sdr->ep.subdev = subdev; + rdrif_dbg(sdr, "bound asd %s\n", subdev->name); + + return 0; +} + +/* Sub-device unbind callback */ +static void rcar_drif_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct rcar_drif_sdr *sdr = + container_of(notifier, struct rcar_drif_sdr, notifier); + + if (sdr->ep.subdev != subdev) { + rdrif_err(sdr, "subdev %s is not bound\n", subdev->name); + return; + } + + /* Free ctrl handler if initialized */ + v4l2_ctrl_handler_free(&sdr->ctrl_hdl); + sdr->v4l2_dev.ctrl_handler = NULL; + sdr->ep.subdev = NULL; + + rcar_drif_sdr_unregister(sdr); + rdrif_dbg(sdr, "unbind asd %s\n", subdev->name); +} + +/* Sub-device registered notification callback */ +static int rcar_drif_notify_complete(struct v4l2_async_notifier *notifier) +{ + struct rcar_drif_sdr *sdr = + container_of(notifier, struct rcar_drif_sdr, notifier); + int ret; + + /* + * The subdev tested at this point uses 4 controls. Using 10 as a worst + * case scenario hint. When less controls are needed there will be some + * unused memory and when more controls are needed the framework uses + * hash to manage controls within this number. + */ + ret = v4l2_ctrl_handler_init(&sdr->ctrl_hdl, 10); + if (ret) + return -ENOMEM; + + sdr->v4l2_dev.ctrl_handler = &sdr->ctrl_hdl; + ret = v4l2_device_register_subdev_nodes(&sdr->v4l2_dev); + if (ret) { + rdrif_err(sdr, "failed: register subdev nodes ret %d\n", ret); + goto error; + } + + ret = v4l2_ctrl_add_handler(&sdr->ctrl_hdl, + sdr->ep.subdev->ctrl_handler, NULL, true); + if (ret) { + rdrif_err(sdr, "failed: ctrl add hdlr ret %d\n", ret); + goto error; + } + + ret = rcar_drif_sdr_register(sdr); + if (ret) + goto error; + + return ret; + +error: + v4l2_ctrl_handler_free(&sdr->ctrl_hdl); + + return ret; +} + +static const struct v4l2_async_notifier_operations rcar_drif_notify_ops = { + .bound = rcar_drif_notify_bound, + .unbind = rcar_drif_notify_unbind, + .complete = rcar_drif_notify_complete, +}; + +/* Read endpoint properties */ +static void rcar_drif_get_ep_properties(struct rcar_drif_sdr *sdr, + struct fwnode_handle *fwnode) +{ + u32 val; + + /* Set the I2S defaults for SIRMDR1*/ + sdr->mdr1 = RCAR_DRIF_SIRMDR1_SYNCMD_LR | RCAR_DRIF_SIRMDR1_MSB_FIRST | + RCAR_DRIF_SIRMDR1_DTDL_1 | RCAR_DRIF_SIRMDR1_SYNCDL_0; + + /* Parse sync polarity from endpoint */ + if (!fwnode_property_read_u32(fwnode, "sync-active", &val)) + sdr->mdr1 |= val ? RCAR_DRIF_SIRMDR1_SYNCAC_POL_HIGH : + RCAR_DRIF_SIRMDR1_SYNCAC_POL_LOW; + else + sdr->mdr1 |= RCAR_DRIF_SIRMDR1_SYNCAC_POL_HIGH; /* default */ + + dev_dbg(sdr->dev, "mdr1 0x%08x\n", sdr->mdr1); +} + +/* Parse sub-devs (tuner) to find a matching device */ +static int rcar_drif_parse_subdevs(struct rcar_drif_sdr *sdr) +{ + struct v4l2_async_notifier *notifier = &sdr->notifier; + struct fwnode_handle *fwnode, *ep; + struct v4l2_async_subdev *asd; + + v4l2_async_nf_init(notifier); + + ep = fwnode_graph_get_next_endpoint(of_fwnode_handle(sdr->dev->of_node), + NULL); + if (!ep) + return 0; + + /* Get the endpoint properties */ + rcar_drif_get_ep_properties(sdr, ep); + + fwnode = fwnode_graph_get_remote_port_parent(ep); + fwnode_handle_put(ep); + if (!fwnode) { + dev_warn(sdr->dev, "bad remote port parent\n"); + return -EINVAL; + } + + asd = v4l2_async_nf_add_fwnode(notifier, fwnode, + struct v4l2_async_subdev); + fwnode_handle_put(fwnode); + if (IS_ERR(asd)) + return PTR_ERR(asd); + + return 0; +} + +/* Check if the given device is the primary bond */ +static bool rcar_drif_primary_bond(struct platform_device *pdev) +{ + return of_property_read_bool(pdev->dev.of_node, "renesas,primary-bond"); +} + +/* Check if both devices of the bond are enabled */ +static struct device_node *rcar_drif_bond_enabled(struct platform_device *p) +{ + struct device_node *np; + + np = of_parse_phandle(p->dev.of_node, "renesas,bonding", 0); + if (np && of_device_is_available(np)) + return np; + + return NULL; +} + +/* Check if the bonded device is probed */ +static int rcar_drif_bond_available(struct rcar_drif_sdr *sdr, + struct device_node *np) +{ + struct platform_device *pdev; + struct rcar_drif *ch; + int ret = 0; + + pdev = of_find_device_by_node(np); + if (!pdev) { + dev_err(sdr->dev, "failed to get bonded device from node\n"); + return -ENODEV; + } + + device_lock(&pdev->dev); + ch = platform_get_drvdata(pdev); + if (ch) { + /* Update sdr data in the bonded device */ + ch->sdr = sdr; + + /* Update sdr with bonded device data */ + sdr->ch[ch->num] = ch; + sdr->hw_ch_mask |= BIT(ch->num); + } else { + /* Defer */ + dev_info(sdr->dev, "defer probe\n"); + ret = -EPROBE_DEFER; + } + device_unlock(&pdev->dev); + + put_device(&pdev->dev); + + return ret; +} + +/* V4L2 SDR device probe */ +static int rcar_drif_sdr_probe(struct rcar_drif_sdr *sdr) +{ + int ret; + + /* Validate any supported format for enabled channels */ + ret = rcar_drif_set_default_format(sdr); + if (ret) { + dev_err(sdr->dev, "failed to set default format\n"); + return ret; + } + + /* Set defaults */ + sdr->hwbuf_size = RCAR_DRIF_DEFAULT_HWBUF_SIZE; + + mutex_init(&sdr->v4l2_mutex); + mutex_init(&sdr->vb_queue_mutex); + spin_lock_init(&sdr->queued_bufs_lock); + spin_lock_init(&sdr->dma_lock); + INIT_LIST_HEAD(&sdr->queued_bufs); + + /* Init videobuf2 queue structure */ + sdr->vb_queue.type = V4L2_BUF_TYPE_SDR_CAPTURE; + sdr->vb_queue.io_modes = VB2_READ | VB2_MMAP | VB2_DMABUF; + sdr->vb_queue.drv_priv = sdr; + sdr->vb_queue.buf_struct_size = sizeof(struct rcar_drif_frame_buf); + sdr->vb_queue.ops = &rcar_drif_vb2_ops; + sdr->vb_queue.mem_ops = &vb2_vmalloc_memops; + sdr->vb_queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + + /* Init videobuf2 queue */ + ret = vb2_queue_init(&sdr->vb_queue); + if (ret) { + dev_err(sdr->dev, "failed: vb2_queue_init ret %d\n", ret); + return ret; + } + + /* Register the v4l2_device */ + ret = v4l2_device_register(sdr->dev, &sdr->v4l2_dev); + if (ret) { + dev_err(sdr->dev, "failed: v4l2_device_register ret %d\n", ret); + return ret; + } + + /* + * Parse subdevs after v4l2_device_register because if the subdev + * is already probed, bound and complete will be called immediately + */ + ret = rcar_drif_parse_subdevs(sdr); + if (ret) + goto error; + + sdr->notifier.ops = &rcar_drif_notify_ops; + + /* Register notifier */ + ret = v4l2_async_nf_register(&sdr->v4l2_dev, &sdr->notifier); + if (ret < 0) { + dev_err(sdr->dev, "failed: notifier register ret %d\n", ret); + goto cleanup; + } + + return ret; + +cleanup: + v4l2_async_nf_cleanup(&sdr->notifier); +error: + v4l2_device_unregister(&sdr->v4l2_dev); + + return ret; +} + +/* V4L2 SDR device remove */ +static void rcar_drif_sdr_remove(struct rcar_drif_sdr *sdr) +{ + v4l2_async_nf_unregister(&sdr->notifier); + v4l2_async_nf_cleanup(&sdr->notifier); + v4l2_device_unregister(&sdr->v4l2_dev); +} + +/* DRIF channel probe */ +static int rcar_drif_probe(struct platform_device *pdev) +{ + struct rcar_drif_sdr *sdr; + struct device_node *np; + struct rcar_drif *ch; + struct resource *res; + int ret; + + /* Reserve memory for enabled channel */ + ch = devm_kzalloc(&pdev->dev, sizeof(*ch), GFP_KERNEL); + if (!ch) + return -ENOMEM; + + ch->pdev = pdev; + + /* Module clock */ + ch->clk = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(ch->clk)) { + ret = PTR_ERR(ch->clk); + dev_err(&pdev->dev, "clk get failed (%d)\n", ret); + return ret; + } + + /* Register map */ + ch->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(ch->base)) + return PTR_ERR(ch->base); + + ch->start = res->start; + platform_set_drvdata(pdev, ch); + + /* Check if both channels of the bond are enabled */ + np = rcar_drif_bond_enabled(pdev); + if (np) { + /* Check if current channel acting as primary-bond */ + if (!rcar_drif_primary_bond(pdev)) { + ch->num = 1; /* Primary bond is channel 0 always */ + of_node_put(np); + return 0; + } + } + + /* Reserve memory for SDR structure */ + sdr = devm_kzalloc(&pdev->dev, sizeof(*sdr), GFP_KERNEL); + if (!sdr) { + of_node_put(np); + return -ENOMEM; + } + ch->sdr = sdr; + sdr->dev = &pdev->dev; + + /* Establish links between SDR and channel(s) */ + sdr->ch[ch->num] = ch; + sdr->hw_ch_mask = BIT(ch->num); + if (np) { + /* Check if bonded device is ready */ + ret = rcar_drif_bond_available(sdr, np); + of_node_put(np); + if (ret) + return ret; + } + sdr->num_hw_ch = hweight_long(sdr->hw_ch_mask); + + return rcar_drif_sdr_probe(sdr); +} + +/* DRIF channel remove */ +static int rcar_drif_remove(struct platform_device *pdev) +{ + struct rcar_drif *ch = platform_get_drvdata(pdev); + struct rcar_drif_sdr *sdr = ch->sdr; + + /* Channel 0 will be the SDR instance */ + if (ch->num) + return 0; + + /* SDR instance */ + rcar_drif_sdr_remove(sdr); + + return 0; +} + +/* FIXME: Implement suspend/resume support */ +static int __maybe_unused rcar_drif_suspend(struct device *dev) +{ + return 0; +} + +static int __maybe_unused rcar_drif_resume(struct device *dev) +{ + return 0; +} + +static SIMPLE_DEV_PM_OPS(rcar_drif_pm_ops, rcar_drif_suspend, + rcar_drif_resume); + +static const struct of_device_id rcar_drif_of_table[] = { + { .compatible = "renesas,rcar-gen3-drif" }, + { } +}; +MODULE_DEVICE_TABLE(of, rcar_drif_of_table); + +#define RCAR_DRIF_DRV_NAME "rcar_drif" +static struct platform_driver rcar_drif_driver = { + .driver = { + .name = RCAR_DRIF_DRV_NAME, + .of_match_table = rcar_drif_of_table, + .pm = &rcar_drif_pm_ops, + }, + .probe = rcar_drif_probe, + .remove = rcar_drif_remove, +}; + +module_platform_driver(rcar_drif_driver); + +MODULE_DESCRIPTION("Renesas R-Car Gen3 DRIF driver"); +MODULE_ALIAS("platform:" RCAR_DRIF_DRV_NAME); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>"); diff --git a/drivers/media/platform/renesas/rcar_fdp1.c b/drivers/media/platform/renesas/rcar_fdp1.c new file mode 100644 index 000000000..dea22e357 --- /dev/null +++ b/drivers/media/platform/renesas/rcar_fdp1.c @@ -0,0 +1,2462 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Renesas R-Car Fine Display Processor + * + * Video format converter and frame deinterlacer device. + * + * Author: Kieran Bingham, <kieran@bingham.xyz> + * Copyright (c) 2016 Renesas Electronics Corporation. + * + * This code is developed and inspired from the vim2m, rcar_jpu, + * m2m-deinterlace, and vsp1 drivers. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <media/rcar-fcp.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-mem2mem.h> +#include <media/videobuf2-dma-contig.h> + +static unsigned int debug; +module_param(debug, uint, 0644); +MODULE_PARM_DESC(debug, "activate debug info"); + +/* Minimum and maximum frame width/height */ +#define FDP1_MIN_W 80U +#define FDP1_MIN_H 80U + +#define FDP1_MAX_W 3840U +#define FDP1_MAX_H 2160U + +#define FDP1_MAX_PLANES 3U +#define FDP1_MAX_STRIDE 8190U + +/* Flags that indicate a format can be used for capture/output */ +#define FDP1_CAPTURE BIT(0) +#define FDP1_OUTPUT BIT(1) + +#define DRIVER_NAME "rcar_fdp1" + +/* Number of Job's to have available on the processing queue */ +#define FDP1_NUMBER_JOBS 8 + +#define dprintk(fdp1, fmt, arg...) \ + v4l2_dbg(1, debug, &fdp1->v4l2_dev, "%s: " fmt, __func__, ## arg) + +/* + * FDP1 registers and bits + */ + +/* FDP1 start register - Imm */ +#define FD1_CTL_CMD 0x0000 +#define FD1_CTL_CMD_STRCMD BIT(0) + +/* Sync generator register - Imm */ +#define FD1_CTL_SGCMD 0x0004 +#define FD1_CTL_SGCMD_SGEN BIT(0) + +/* Register set end register - Imm */ +#define FD1_CTL_REGEND 0x0008 +#define FD1_CTL_REGEND_REGEND BIT(0) + +/* Channel activation register - Vupdt */ +#define FD1_CTL_CHACT 0x000c +#define FD1_CTL_CHACT_SMW BIT(9) +#define FD1_CTL_CHACT_WR BIT(8) +#define FD1_CTL_CHACT_SMR BIT(3) +#define FD1_CTL_CHACT_RD2 BIT(2) +#define FD1_CTL_CHACT_RD1 BIT(1) +#define FD1_CTL_CHACT_RD0 BIT(0) + +/* Operation Mode Register - Vupdt */ +#define FD1_CTL_OPMODE 0x0010 +#define FD1_CTL_OPMODE_PRG BIT(4) +#define FD1_CTL_OPMODE_VIMD_INTERRUPT (0 << 0) +#define FD1_CTL_OPMODE_VIMD_BESTEFFORT (1 << 0) +#define FD1_CTL_OPMODE_VIMD_NOINTERRUPT (2 << 0) + +#define FD1_CTL_VPERIOD 0x0014 +#define FD1_CTL_CLKCTRL 0x0018 +#define FD1_CTL_CLKCTRL_CSTP_N BIT(0) + +/* Software reset register */ +#define FD1_CTL_SRESET 0x001c +#define FD1_CTL_SRESET_SRST BIT(0) + +/* Control status register (V-update-status) */ +#define FD1_CTL_STATUS 0x0024 +#define FD1_CTL_STATUS_VINT_CNT_MASK GENMASK(31, 16) +#define FD1_CTL_STATUS_VINT_CNT_SHIFT 16 +#define FD1_CTL_STATUS_SGREGSET BIT(10) +#define FD1_CTL_STATUS_SGVERR BIT(9) +#define FD1_CTL_STATUS_SGFREND BIT(8) +#define FD1_CTL_STATUS_BSY BIT(0) + +#define FD1_CTL_VCYCLE_STAT 0x0028 + +/* Interrupt enable register */ +#define FD1_CTL_IRQENB 0x0038 +/* Interrupt status register */ +#define FD1_CTL_IRQSTA 0x003c +/* Interrupt control register */ +#define FD1_CTL_IRQFSET 0x0040 + +/* Common IRQ Bit settings */ +#define FD1_CTL_IRQ_VERE BIT(16) +#define FD1_CTL_IRQ_VINTE BIT(4) +#define FD1_CTL_IRQ_FREE BIT(0) +#define FD1_CTL_IRQ_MASK (FD1_CTL_IRQ_VERE | \ + FD1_CTL_IRQ_VINTE | \ + FD1_CTL_IRQ_FREE) + +/* RPF */ +#define FD1_RPF_SIZE 0x0060 +#define FD1_RPF_SIZE_MASK GENMASK(12, 0) +#define FD1_RPF_SIZE_H_SHIFT 16 +#define FD1_RPF_SIZE_V_SHIFT 0 + +#define FD1_RPF_FORMAT 0x0064 +#define FD1_RPF_FORMAT_CIPM BIT(16) +#define FD1_RPF_FORMAT_RSPYCS BIT(13) +#define FD1_RPF_FORMAT_RSPUVS BIT(12) +#define FD1_RPF_FORMAT_CF BIT(8) + +#define FD1_RPF_PSTRIDE 0x0068 +#define FD1_RPF_PSTRIDE_Y_SHIFT 16 +#define FD1_RPF_PSTRIDE_C_SHIFT 0 + +/* RPF0 Source Component Y Address register */ +#define FD1_RPF0_ADDR_Y 0x006c + +/* RPF1 Current Picture Registers */ +#define FD1_RPF1_ADDR_Y 0x0078 +#define FD1_RPF1_ADDR_C0 0x007c +#define FD1_RPF1_ADDR_C1 0x0080 + +/* RPF2 next picture register */ +#define FD1_RPF2_ADDR_Y 0x0084 + +#define FD1_RPF_SMSK_ADDR 0x0090 +#define FD1_RPF_SWAP 0x0094 + +/* WPF */ +#define FD1_WPF_FORMAT 0x00c0 +#define FD1_WPF_FORMAT_PDV_SHIFT 24 +#define FD1_WPF_FORMAT_FCNL BIT(20) +#define FD1_WPF_FORMAT_WSPYCS BIT(15) +#define FD1_WPF_FORMAT_WSPUVS BIT(14) +#define FD1_WPF_FORMAT_WRTM_601_16 (0 << 9) +#define FD1_WPF_FORMAT_WRTM_601_0 (1 << 9) +#define FD1_WPF_FORMAT_WRTM_709_16 (2 << 9) +#define FD1_WPF_FORMAT_CSC BIT(8) + +#define FD1_WPF_RNDCTL 0x00c4 +#define FD1_WPF_RNDCTL_CBRM BIT(28) +#define FD1_WPF_RNDCTL_CLMD_NOCLIP (0 << 12) +#define FD1_WPF_RNDCTL_CLMD_CLIP_16_235 (1 << 12) +#define FD1_WPF_RNDCTL_CLMD_CLIP_1_254 (2 << 12) + +#define FD1_WPF_PSTRIDE 0x00c8 +#define FD1_WPF_PSTRIDE_Y_SHIFT 16 +#define FD1_WPF_PSTRIDE_C_SHIFT 0 + +/* WPF Destination picture */ +#define FD1_WPF_ADDR_Y 0x00cc +#define FD1_WPF_ADDR_C0 0x00d0 +#define FD1_WPF_ADDR_C1 0x00d4 +#define FD1_WPF_SWAP 0x00d8 +#define FD1_WPF_SWAP_OSWAP_SHIFT 0 +#define FD1_WPF_SWAP_SSWAP_SHIFT 4 + +/* WPF/RPF Common */ +#define FD1_RWPF_SWAP_BYTE BIT(0) +#define FD1_RWPF_SWAP_WORD BIT(1) +#define FD1_RWPF_SWAP_LWRD BIT(2) +#define FD1_RWPF_SWAP_LLWD BIT(3) + +/* IPC */ +#define FD1_IPC_MODE 0x0100 +#define FD1_IPC_MODE_DLI BIT(8) +#define FD1_IPC_MODE_DIM_ADAPT2D3D (0 << 0) +#define FD1_IPC_MODE_DIM_FIXED2D (1 << 0) +#define FD1_IPC_MODE_DIM_FIXED3D (2 << 0) +#define FD1_IPC_MODE_DIM_PREVFIELD (3 << 0) +#define FD1_IPC_MODE_DIM_NEXTFIELD (4 << 0) + +#define FD1_IPC_SMSK_THRESH 0x0104 +#define FD1_IPC_SMSK_THRESH_CONST 0x00010002 + +#define FD1_IPC_COMB_DET 0x0108 +#define FD1_IPC_COMB_DET_CONST 0x00200040 + +#define FD1_IPC_MOTDEC 0x010c +#define FD1_IPC_MOTDEC_CONST 0x00008020 + +/* DLI registers */ +#define FD1_IPC_DLI_BLEND 0x0120 +#define FD1_IPC_DLI_BLEND_CONST 0x0080ff02 + +#define FD1_IPC_DLI_HGAIN 0x0124 +#define FD1_IPC_DLI_HGAIN_CONST 0x001000ff + +#define FD1_IPC_DLI_SPRS 0x0128 +#define FD1_IPC_DLI_SPRS_CONST 0x009004ff + +#define FD1_IPC_DLI_ANGLE 0x012c +#define FD1_IPC_DLI_ANGLE_CONST 0x0004080c + +#define FD1_IPC_DLI_ISOPIX0 0x0130 +#define FD1_IPC_DLI_ISOPIX0_CONST 0xff10ff10 + +#define FD1_IPC_DLI_ISOPIX1 0x0134 +#define FD1_IPC_DLI_ISOPIX1_CONST 0x0000ff10 + +/* Sensor registers */ +#define FD1_IPC_SENSOR_TH0 0x0140 +#define FD1_IPC_SENSOR_TH0_CONST 0x20208080 + +#define FD1_IPC_SENSOR_TH1 0x0144 +#define FD1_IPC_SENSOR_TH1_CONST 0 + +#define FD1_IPC_SENSOR_CTL0 0x0170 +#define FD1_IPC_SENSOR_CTL0_CONST 0x00002201 + +#define FD1_IPC_SENSOR_CTL1 0x0174 +#define FD1_IPC_SENSOR_CTL1_CONST 0 + +#define FD1_IPC_SENSOR_CTL2 0x0178 +#define FD1_IPC_SENSOR_CTL2_X_SHIFT 16 +#define FD1_IPC_SENSOR_CTL2_Y_SHIFT 0 + +#define FD1_IPC_SENSOR_CTL3 0x017c +#define FD1_IPC_SENSOR_CTL3_0_SHIFT 16 +#define FD1_IPC_SENSOR_CTL3_1_SHIFT 0 + +/* Line memory pixel number register */ +#define FD1_IPC_LMEM 0x01e0 +#define FD1_IPC_LMEM_LINEAR 1024 +#define FD1_IPC_LMEM_TILE 960 + +/* Internal Data (HW Version) */ +#define FD1_IP_INTDATA 0x0800 +#define FD1_IP_H3_ES1 0x02010101 +#define FD1_IP_M3W 0x02010202 +#define FD1_IP_H3 0x02010203 +#define FD1_IP_M3N 0x02010204 +#define FD1_IP_E3 0x02010205 + +/* LUTs */ +#define FD1_LUT_DIF_ADJ 0x1000 +#define FD1_LUT_SAD_ADJ 0x1400 +#define FD1_LUT_BLD_GAIN 0x1800 +#define FD1_LUT_DIF_GAIN 0x1c00 +#define FD1_LUT_MDET 0x2000 + +/** + * struct fdp1_fmt - The FDP1 internal format data + * @fourcc: the fourcc code, to match the V4L2 API + * @bpp: bits per pixel per plane + * @num_planes: number of planes + * @hsub: horizontal subsampling factor + * @vsub: vertical subsampling factor + * @fmt: 7-bit format code for the fdp1 hardware + * @swap_yc: the Y and C components are swapped (Y comes before C) + * @swap_uv: the U and V components are swapped (V comes before U) + * @swap: swap register control + * @types: types of queue this format is applicable to + */ +struct fdp1_fmt { + u32 fourcc; + u8 bpp[3]; + u8 num_planes; + u8 hsub; + u8 vsub; + u8 fmt; + bool swap_yc; + bool swap_uv; + u8 swap; + u8 types; +}; + +static const struct fdp1_fmt fdp1_formats[] = { + /* RGB formats are only supported by the Write Pixel Formatter */ + + { V4L2_PIX_FMT_RGB332, { 8, 0, 0 }, 1, 1, 1, 0x00, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_XRGB444, { 16, 0, 0 }, 1, 1, 1, 0x01, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_XRGB555, { 16, 0, 0 }, 1, 1, 1, 0x04, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_RGB565, { 16, 0, 0 }, 1, 1, 1, 0x06, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_ABGR32, { 32, 0, 0 }, 1, 1, 1, 0x13, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_XBGR32, { 32, 0, 0 }, 1, 1, 1, 0x13, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_ARGB32, { 32, 0, 0 }, 1, 1, 1, 0x13, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_XRGB32, { 32, 0, 0 }, 1, 1, 1, 0x13, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_RGB24, { 24, 0, 0 }, 1, 1, 1, 0x15, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_BGR24, { 24, 0, 0 }, 1, 1, 1, 0x18, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_ARGB444, { 16, 0, 0 }, 1, 1, 1, 0x19, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD, + FDP1_CAPTURE }, + { V4L2_PIX_FMT_ARGB555, { 16, 0, 0 }, 1, 1, 1, 0x1b, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD, + FDP1_CAPTURE }, + + /* YUV Formats are supported by Read and Write Pixel Formatters */ + + { V4L2_PIX_FMT_NV16M, { 8, 16, 0 }, 2, 2, 1, 0x41, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_NV61M, { 8, 16, 0 }, 2, 2, 1, 0x41, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_NV12M, { 8, 16, 0 }, 2, 2, 2, 0x42, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_NV21M, { 8, 16, 0 }, 2, 2, 2, 0x42, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_UYVY, { 16, 0, 0 }, 1, 2, 1, 0x47, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_VYUY, { 16, 0, 0 }, 1, 2, 1, 0x47, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YUYV, { 16, 0, 0 }, 1, 2, 1, 0x47, true, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YVYU, { 16, 0, 0 }, 1, 2, 1, 0x47, true, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YUV444M, { 8, 8, 8 }, 3, 1, 1, 0x4a, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YVU444M, { 8, 8, 8 }, 3, 1, 1, 0x4a, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YUV422M, { 8, 8, 8 }, 3, 2, 1, 0x4b, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YVU422M, { 8, 8, 8 }, 3, 2, 1, 0x4b, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YUV420M, { 8, 8, 8 }, 3, 2, 2, 0x4c, false, false, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, + { V4L2_PIX_FMT_YVU420M, { 8, 8, 8 }, 3, 2, 2, 0x4c, false, true, + FD1_RWPF_SWAP_LLWD | FD1_RWPF_SWAP_LWRD | + FD1_RWPF_SWAP_WORD | FD1_RWPF_SWAP_BYTE, + FDP1_CAPTURE | FDP1_OUTPUT }, +}; + +static int fdp1_fmt_is_rgb(const struct fdp1_fmt *fmt) +{ + return fmt->fmt <= 0x1b; /* Last RGB code */ +} + +/* + * FDP1 Lookup tables range from 0...255 only + * + * Each table must be less than 256 entries, and all tables + * are padded out to 256 entries by duplicating the last value. + */ +static const u8 fdp1_diff_adj[] = { + 0x00, 0x24, 0x43, 0x5e, 0x76, 0x8c, 0x9e, 0xaf, + 0xbd, 0xc9, 0xd4, 0xdd, 0xe4, 0xea, 0xef, 0xf3, + 0xf6, 0xf9, 0xfb, 0xfc, 0xfd, 0xfe, 0xfe, 0xff, +}; + +static const u8 fdp1_sad_adj[] = { + 0x00, 0x24, 0x43, 0x5e, 0x76, 0x8c, 0x9e, 0xaf, + 0xbd, 0xc9, 0xd4, 0xdd, 0xe4, 0xea, 0xef, 0xf3, + 0xf6, 0xf9, 0xfb, 0xfc, 0xfd, 0xfe, 0xfe, 0xff, +}; + +static const u8 fdp1_bld_gain[] = { + 0x80, +}; + +static const u8 fdp1_dif_gain[] = { + 0x80, +}; + +static const u8 fdp1_mdet[] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, + 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, + 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, + 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, + 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, + 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, + 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, + 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, + 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, + 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f, + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, + 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, + 0xb8, 0xb9, 0xba, 0xbb, 0xbc, 0xbd, 0xbe, 0xbf, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, + 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, + 0xd8, 0xd9, 0xda, 0xdb, 0xdc, 0xdd, 0xde, 0xdf, + 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, + 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef, + 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, + 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff +}; + +/* Per-queue, driver-specific private data */ +struct fdp1_q_data { + const struct fdp1_fmt *fmt; + struct v4l2_pix_format_mplane format; + + unsigned int vsize; + unsigned int stride_y; + unsigned int stride_c; +}; + +static const struct fdp1_fmt *fdp1_find_format(u32 pixelformat) +{ + const struct fdp1_fmt *fmt; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(fdp1_formats); i++) { + fmt = &fdp1_formats[i]; + if (fmt->fourcc == pixelformat) + return fmt; + } + + return NULL; +} + +enum fdp1_deint_mode { + FDP1_PROGRESSIVE = 0, /* Must be zero when !deinterlacing */ + FDP1_ADAPT2D3D, + FDP1_FIXED2D, + FDP1_FIXED3D, + FDP1_PREVFIELD, + FDP1_NEXTFIELD, +}; + +#define FDP1_DEINT_MODE_USES_NEXT(mode) \ + (mode == FDP1_ADAPT2D3D || \ + mode == FDP1_FIXED3D || \ + mode == FDP1_NEXTFIELD) + +#define FDP1_DEINT_MODE_USES_PREV(mode) \ + (mode == FDP1_ADAPT2D3D || \ + mode == FDP1_FIXED3D || \ + mode == FDP1_PREVFIELD) + +/* + * FDP1 operates on potentially 3 fields, which are tracked + * from the VB buffers using this context structure. + * Will always be a field or a full frame, never two fields. + */ +struct fdp1_field_buffer { + struct vb2_v4l2_buffer *vb; + dma_addr_t addrs[3]; + + /* Should be NONE:TOP:BOTTOM only */ + enum v4l2_field field; + + /* Flag to indicate this is the last field in the vb */ + bool last_field; + + /* Buffer queue lists */ + struct list_head list; +}; + +struct fdp1_buffer { + struct v4l2_m2m_buffer m2m_buf; + struct fdp1_field_buffer fields[2]; + unsigned int num_fields; +}; + +static inline struct fdp1_buffer *to_fdp1_buffer(struct vb2_v4l2_buffer *vb) +{ + return container_of(vb, struct fdp1_buffer, m2m_buf.vb); +} + +struct fdp1_job { + struct fdp1_field_buffer *previous; + struct fdp1_field_buffer *active; + struct fdp1_field_buffer *next; + struct fdp1_field_buffer *dst; + + /* A job can only be on one list at a time */ + struct list_head list; +}; + +struct fdp1_dev { + struct v4l2_device v4l2_dev; + struct video_device vfd; + + struct mutex dev_mutex; + spinlock_t irqlock; + spinlock_t device_process_lock; + + void __iomem *regs; + unsigned int irq; + struct device *dev; + + /* Job Queues */ + struct fdp1_job jobs[FDP1_NUMBER_JOBS]; + struct list_head free_job_list; + struct list_head queued_job_list; + struct list_head hw_job_list; + + unsigned int clk_rate; + + struct rcar_fcp_device *fcp; + struct v4l2_m2m_dev *m2m_dev; +}; + +struct fdp1_ctx { + struct v4l2_fh fh; + struct fdp1_dev *fdp1; + + struct v4l2_ctrl_handler hdl; + unsigned int sequence; + + /* Processed buffers in this transaction */ + u8 num_processed; + + /* Transaction length (i.e. how many buffers per transaction) */ + u32 translen; + + /* Abort requested by m2m */ + int aborting; + + /* Deinterlace processing mode */ + enum fdp1_deint_mode deint_mode; + + /* + * Adaptive 2D/3D mode uses a shared mask + * This is allocated at streamon, if the ADAPT2D3D mode + * is requested + */ + unsigned int smsk_size; + dma_addr_t smsk_addr[2]; + void *smsk_cpu; + + /* Capture pipeline, can specify an alpha value + * for supported formats. 0-255 only + */ + unsigned char alpha; + + /* Source and destination queue data */ + struct fdp1_q_data out_q; /* HW Source */ + struct fdp1_q_data cap_q; /* HW Destination */ + + /* + * Field Queues + * Interlaced fields are used on 3 occasions, and tracked in this list. + * + * V4L2 Buffers are tracked inside the fdp1_buffer + * and released when the last 'field' completes + */ + struct list_head fields_queue; + unsigned int buffers_queued; + + /* + * For de-interlacing we need to track our previous buffer + * while preparing our job lists. + */ + struct fdp1_field_buffer *previous; +}; + +static inline struct fdp1_ctx *fh_to_ctx(struct v4l2_fh *fh) +{ + return container_of(fh, struct fdp1_ctx, fh); +} + +static struct fdp1_q_data *get_q_data(struct fdp1_ctx *ctx, + enum v4l2_buf_type type) +{ + if (V4L2_TYPE_IS_OUTPUT(type)) + return &ctx->out_q; + else + return &ctx->cap_q; +} + +/* + * list_remove_job: Take the first item off the specified job list + * + * Returns: pointer to a job, or NULL if the list is empty. + */ +static struct fdp1_job *list_remove_job(struct fdp1_dev *fdp1, + struct list_head *list) +{ + struct fdp1_job *job; + unsigned long flags; + + spin_lock_irqsave(&fdp1->irqlock, flags); + job = list_first_entry_or_null(list, struct fdp1_job, list); + if (job) + list_del(&job->list); + spin_unlock_irqrestore(&fdp1->irqlock, flags); + + return job; +} + +/* + * list_add_job: Add a job to the specified job list + * + * Returns: void - always succeeds + */ +static void list_add_job(struct fdp1_dev *fdp1, + struct list_head *list, + struct fdp1_job *job) +{ + unsigned long flags; + + spin_lock_irqsave(&fdp1->irqlock, flags); + list_add_tail(&job->list, list); + spin_unlock_irqrestore(&fdp1->irqlock, flags); +} + +static struct fdp1_job *fdp1_job_alloc(struct fdp1_dev *fdp1) +{ + return list_remove_job(fdp1, &fdp1->free_job_list); +} + +static void fdp1_job_free(struct fdp1_dev *fdp1, struct fdp1_job *job) +{ + /* Ensure that all residue from previous jobs is gone */ + memset(job, 0, sizeof(struct fdp1_job)); + + list_add_job(fdp1, &fdp1->free_job_list, job); +} + +static void queue_job(struct fdp1_dev *fdp1, struct fdp1_job *job) +{ + list_add_job(fdp1, &fdp1->queued_job_list, job); +} + +static struct fdp1_job *get_queued_job(struct fdp1_dev *fdp1) +{ + return list_remove_job(fdp1, &fdp1->queued_job_list); +} + +static void queue_hw_job(struct fdp1_dev *fdp1, struct fdp1_job *job) +{ + list_add_job(fdp1, &fdp1->hw_job_list, job); +} + +static struct fdp1_job *get_hw_queued_job(struct fdp1_dev *fdp1) +{ + return list_remove_job(fdp1, &fdp1->hw_job_list); +} + +/* + * Buffer lists handling + */ +static void fdp1_field_complete(struct fdp1_ctx *ctx, + struct fdp1_field_buffer *fbuf) +{ + /* job->previous may be on the first field */ + if (!fbuf) + return; + + if (fbuf->last_field) + v4l2_m2m_buf_done(fbuf->vb, VB2_BUF_STATE_DONE); +} + +static void fdp1_queue_field(struct fdp1_ctx *ctx, + struct fdp1_field_buffer *fbuf) +{ + unsigned long flags; + + spin_lock_irqsave(&ctx->fdp1->irqlock, flags); + list_add_tail(&fbuf->list, &ctx->fields_queue); + spin_unlock_irqrestore(&ctx->fdp1->irqlock, flags); + + ctx->buffers_queued++; +} + +static struct fdp1_field_buffer *fdp1_dequeue_field(struct fdp1_ctx *ctx) +{ + struct fdp1_field_buffer *fbuf; + unsigned long flags; + + ctx->buffers_queued--; + + spin_lock_irqsave(&ctx->fdp1->irqlock, flags); + fbuf = list_first_entry_or_null(&ctx->fields_queue, + struct fdp1_field_buffer, list); + if (fbuf) + list_del(&fbuf->list); + spin_unlock_irqrestore(&ctx->fdp1->irqlock, flags); + + return fbuf; +} + +/* + * Return the next field in the queue - or NULL, + * without removing the item from the list + */ +static struct fdp1_field_buffer *fdp1_peek_queued_field(struct fdp1_ctx *ctx) +{ + struct fdp1_field_buffer *fbuf; + unsigned long flags; + + spin_lock_irqsave(&ctx->fdp1->irqlock, flags); + fbuf = list_first_entry_or_null(&ctx->fields_queue, + struct fdp1_field_buffer, list); + spin_unlock_irqrestore(&ctx->fdp1->irqlock, flags); + + return fbuf; +} + +static u32 fdp1_read(struct fdp1_dev *fdp1, unsigned int reg) +{ + u32 value = ioread32(fdp1->regs + reg); + + if (debug >= 2) + dprintk(fdp1, "Read 0x%08x from 0x%04x\n", value, reg); + + return value; +} + +static void fdp1_write(struct fdp1_dev *fdp1, u32 val, unsigned int reg) +{ + if (debug >= 2) + dprintk(fdp1, "Write 0x%08x to 0x%04x\n", val, reg); + + iowrite32(val, fdp1->regs + reg); +} + +/* IPC registers are to be programmed with constant values */ +static void fdp1_set_ipc_dli(struct fdp1_ctx *ctx) +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + + fdp1_write(fdp1, FD1_IPC_SMSK_THRESH_CONST, FD1_IPC_SMSK_THRESH); + fdp1_write(fdp1, FD1_IPC_COMB_DET_CONST, FD1_IPC_COMB_DET); + fdp1_write(fdp1, FD1_IPC_MOTDEC_CONST, FD1_IPC_MOTDEC); + + fdp1_write(fdp1, FD1_IPC_DLI_BLEND_CONST, FD1_IPC_DLI_BLEND); + fdp1_write(fdp1, FD1_IPC_DLI_HGAIN_CONST, FD1_IPC_DLI_HGAIN); + fdp1_write(fdp1, FD1_IPC_DLI_SPRS_CONST, FD1_IPC_DLI_SPRS); + fdp1_write(fdp1, FD1_IPC_DLI_ANGLE_CONST, FD1_IPC_DLI_ANGLE); + fdp1_write(fdp1, FD1_IPC_DLI_ISOPIX0_CONST, FD1_IPC_DLI_ISOPIX0); + fdp1_write(fdp1, FD1_IPC_DLI_ISOPIX1_CONST, FD1_IPC_DLI_ISOPIX1); +} + + +static void fdp1_set_ipc_sensor(struct fdp1_ctx *ctx) +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + struct fdp1_q_data *src_q_data = &ctx->out_q; + unsigned int x0, x1; + unsigned int hsize = src_q_data->format.width; + unsigned int vsize = src_q_data->format.height; + + x0 = hsize / 3; + x1 = 2 * hsize / 3; + + fdp1_write(fdp1, FD1_IPC_SENSOR_TH0_CONST, FD1_IPC_SENSOR_TH0); + fdp1_write(fdp1, FD1_IPC_SENSOR_TH1_CONST, FD1_IPC_SENSOR_TH1); + fdp1_write(fdp1, FD1_IPC_SENSOR_CTL0_CONST, FD1_IPC_SENSOR_CTL0); + fdp1_write(fdp1, FD1_IPC_SENSOR_CTL1_CONST, FD1_IPC_SENSOR_CTL1); + + fdp1_write(fdp1, ((hsize - 1) << FD1_IPC_SENSOR_CTL2_X_SHIFT) | + ((vsize - 1) << FD1_IPC_SENSOR_CTL2_Y_SHIFT), + FD1_IPC_SENSOR_CTL2); + + fdp1_write(fdp1, (x0 << FD1_IPC_SENSOR_CTL3_0_SHIFT) | + (x1 << FD1_IPC_SENSOR_CTL3_1_SHIFT), + FD1_IPC_SENSOR_CTL3); +} + +/* + * fdp1_write_lut: Write a padded LUT to the hw + * + * FDP1 uses constant data for de-interlacing processing, + * with large tables. These hardware tables are all 256 bytes + * long, however they often contain repeated data at the end. + * + * The last byte of the table is written to all remaining entries. + */ +static void fdp1_write_lut(struct fdp1_dev *fdp1, const u8 *lut, + unsigned int len, unsigned int base) +{ + unsigned int i; + u8 pad; + + /* Tables larger than the hw are clipped */ + len = min(len, 256u); + + for (i = 0; i < len; i++) + fdp1_write(fdp1, lut[i], base + (i*4)); + + /* Tables are padded with the last entry */ + pad = lut[i-1]; + + for (; i < 256; i++) + fdp1_write(fdp1, pad, base + (i*4)); +} + +static void fdp1_set_lut(struct fdp1_dev *fdp1) +{ + fdp1_write_lut(fdp1, fdp1_diff_adj, ARRAY_SIZE(fdp1_diff_adj), + FD1_LUT_DIF_ADJ); + fdp1_write_lut(fdp1, fdp1_sad_adj, ARRAY_SIZE(fdp1_sad_adj), + FD1_LUT_SAD_ADJ); + fdp1_write_lut(fdp1, fdp1_bld_gain, ARRAY_SIZE(fdp1_bld_gain), + FD1_LUT_BLD_GAIN); + fdp1_write_lut(fdp1, fdp1_dif_gain, ARRAY_SIZE(fdp1_dif_gain), + FD1_LUT_DIF_GAIN); + fdp1_write_lut(fdp1, fdp1_mdet, ARRAY_SIZE(fdp1_mdet), + FD1_LUT_MDET); +} + +static void fdp1_configure_rpf(struct fdp1_ctx *ctx, + struct fdp1_job *job) +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + u32 picture_size; + u32 pstride; + u32 format; + u32 smsk_addr; + + struct fdp1_q_data *q_data = &ctx->out_q; + + /* Picture size is common to Source and Destination frames */ + picture_size = (q_data->format.width << FD1_RPF_SIZE_H_SHIFT) + | (q_data->vsize << FD1_RPF_SIZE_V_SHIFT); + + /* Strides */ + pstride = q_data->stride_y << FD1_RPF_PSTRIDE_Y_SHIFT; + if (q_data->format.num_planes > 1) + pstride |= q_data->stride_c << FD1_RPF_PSTRIDE_C_SHIFT; + + /* Format control */ + format = q_data->fmt->fmt; + if (q_data->fmt->swap_yc) + format |= FD1_RPF_FORMAT_RSPYCS; + + if (q_data->fmt->swap_uv) + format |= FD1_RPF_FORMAT_RSPUVS; + + if (job->active->field == V4L2_FIELD_BOTTOM) { + format |= FD1_RPF_FORMAT_CF; /* Set for Bottom field */ + smsk_addr = ctx->smsk_addr[0]; + } else { + smsk_addr = ctx->smsk_addr[1]; + } + + /* Deint mode is non-zero when deinterlacing */ + if (ctx->deint_mode) + format |= FD1_RPF_FORMAT_CIPM; + + fdp1_write(fdp1, format, FD1_RPF_FORMAT); + fdp1_write(fdp1, q_data->fmt->swap, FD1_RPF_SWAP); + fdp1_write(fdp1, picture_size, FD1_RPF_SIZE); + fdp1_write(fdp1, pstride, FD1_RPF_PSTRIDE); + fdp1_write(fdp1, smsk_addr, FD1_RPF_SMSK_ADDR); + + /* Previous Field Channel (CH0) */ + if (job->previous) + fdp1_write(fdp1, job->previous->addrs[0], FD1_RPF0_ADDR_Y); + + /* Current Field Channel (CH1) */ + fdp1_write(fdp1, job->active->addrs[0], FD1_RPF1_ADDR_Y); + fdp1_write(fdp1, job->active->addrs[1], FD1_RPF1_ADDR_C0); + fdp1_write(fdp1, job->active->addrs[2], FD1_RPF1_ADDR_C1); + + /* Next Field Channel (CH2) */ + if (job->next) + fdp1_write(fdp1, job->next->addrs[0], FD1_RPF2_ADDR_Y); +} + +static void fdp1_configure_wpf(struct fdp1_ctx *ctx, + struct fdp1_job *job) +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + struct fdp1_q_data *src_q_data = &ctx->out_q; + struct fdp1_q_data *q_data = &ctx->cap_q; + u32 pstride; + u32 format; + u32 swap; + u32 rndctl; + + pstride = q_data->format.plane_fmt[0].bytesperline + << FD1_WPF_PSTRIDE_Y_SHIFT; + + if (q_data->format.num_planes > 1) + pstride |= q_data->format.plane_fmt[1].bytesperline + << FD1_WPF_PSTRIDE_C_SHIFT; + + format = q_data->fmt->fmt; /* Output Format Code */ + + if (q_data->fmt->swap_yc) + format |= FD1_WPF_FORMAT_WSPYCS; + + if (q_data->fmt->swap_uv) + format |= FD1_WPF_FORMAT_WSPUVS; + + if (fdp1_fmt_is_rgb(q_data->fmt)) { + /* Enable Colour Space conversion */ + format |= FD1_WPF_FORMAT_CSC; + + /* Set WRTM */ + if (src_q_data->format.ycbcr_enc == V4L2_YCBCR_ENC_709) + format |= FD1_WPF_FORMAT_WRTM_709_16; + else if (src_q_data->format.quantization == + V4L2_QUANTIZATION_FULL_RANGE) + format |= FD1_WPF_FORMAT_WRTM_601_0; + else + format |= FD1_WPF_FORMAT_WRTM_601_16; + } + + /* Set an alpha value into the Pad Value */ + format |= ctx->alpha << FD1_WPF_FORMAT_PDV_SHIFT; + + /* Determine picture rounding and clipping */ + rndctl = FD1_WPF_RNDCTL_CBRM; /* Rounding Off */ + rndctl |= FD1_WPF_RNDCTL_CLMD_NOCLIP; + + /* WPF Swap needs both ISWAP and OSWAP setting */ + swap = q_data->fmt->swap << FD1_WPF_SWAP_OSWAP_SHIFT; + swap |= src_q_data->fmt->swap << FD1_WPF_SWAP_SSWAP_SHIFT; + + fdp1_write(fdp1, format, FD1_WPF_FORMAT); + fdp1_write(fdp1, rndctl, FD1_WPF_RNDCTL); + fdp1_write(fdp1, swap, FD1_WPF_SWAP); + fdp1_write(fdp1, pstride, FD1_WPF_PSTRIDE); + + fdp1_write(fdp1, job->dst->addrs[0], FD1_WPF_ADDR_Y); + fdp1_write(fdp1, job->dst->addrs[1], FD1_WPF_ADDR_C0); + fdp1_write(fdp1, job->dst->addrs[2], FD1_WPF_ADDR_C1); +} + +static void fdp1_configure_deint_mode(struct fdp1_ctx *ctx, + struct fdp1_job *job) +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + u32 opmode = FD1_CTL_OPMODE_VIMD_NOINTERRUPT; + u32 ipcmode = FD1_IPC_MODE_DLI; /* Always set */ + u32 channels = FD1_CTL_CHACT_WR | FD1_CTL_CHACT_RD1; /* Always on */ + + /* De-interlacing Mode */ + switch (ctx->deint_mode) { + default: + case FDP1_PROGRESSIVE: + dprintk(fdp1, "Progressive Mode\n"); + opmode |= FD1_CTL_OPMODE_PRG; + ipcmode |= FD1_IPC_MODE_DIM_FIXED2D; + break; + case FDP1_ADAPT2D3D: + dprintk(fdp1, "Adapt2D3D Mode\n"); + if (ctx->sequence == 0 || ctx->aborting) + ipcmode |= FD1_IPC_MODE_DIM_FIXED2D; + else + ipcmode |= FD1_IPC_MODE_DIM_ADAPT2D3D; + + if (ctx->sequence > 1) { + channels |= FD1_CTL_CHACT_SMW; + channels |= FD1_CTL_CHACT_RD0 | FD1_CTL_CHACT_RD2; + } + + if (ctx->sequence > 2) + channels |= FD1_CTL_CHACT_SMR; + + break; + case FDP1_FIXED3D: + dprintk(fdp1, "Fixed 3D Mode\n"); + ipcmode |= FD1_IPC_MODE_DIM_FIXED3D; + /* Except for first and last frame, enable all channels */ + if (!(ctx->sequence == 0 || ctx->aborting)) + channels |= FD1_CTL_CHACT_RD0 | FD1_CTL_CHACT_RD2; + break; + case FDP1_FIXED2D: + dprintk(fdp1, "Fixed 2D Mode\n"); + ipcmode |= FD1_IPC_MODE_DIM_FIXED2D; + /* No extra channels enabled */ + break; + case FDP1_PREVFIELD: + dprintk(fdp1, "Previous Field Mode\n"); + ipcmode |= FD1_IPC_MODE_DIM_PREVFIELD; + channels |= FD1_CTL_CHACT_RD0; /* Previous */ + break; + case FDP1_NEXTFIELD: + dprintk(fdp1, "Next Field Mode\n"); + ipcmode |= FD1_IPC_MODE_DIM_NEXTFIELD; + channels |= FD1_CTL_CHACT_RD2; /* Next */ + break; + } + + fdp1_write(fdp1, channels, FD1_CTL_CHACT); + fdp1_write(fdp1, opmode, FD1_CTL_OPMODE); + fdp1_write(fdp1, ipcmode, FD1_IPC_MODE); +} + +/* + * fdp1_device_process() - Run the hardware + * + * Configure and start the hardware to generate a single frame + * of output given our input parameters. + */ +static int fdp1_device_process(struct fdp1_ctx *ctx) + +{ + struct fdp1_dev *fdp1 = ctx->fdp1; + struct fdp1_job *job; + unsigned long flags; + + spin_lock_irqsave(&fdp1->device_process_lock, flags); + + /* Get a job to process */ + job = get_queued_job(fdp1); + if (!job) { + /* + * VINT can call us to see if we can queue another job. + * If we have no work to do, we simply return. + */ + spin_unlock_irqrestore(&fdp1->device_process_lock, flags); + return 0; + } + + /* First Frame only? ... */ + fdp1_write(fdp1, FD1_CTL_CLKCTRL_CSTP_N, FD1_CTL_CLKCTRL); + + /* Set the mode, and configuration */ + fdp1_configure_deint_mode(ctx, job); + + /* DLI Static Configuration */ + fdp1_set_ipc_dli(ctx); + + /* Sensor Configuration */ + fdp1_set_ipc_sensor(ctx); + + /* Setup the source picture */ + fdp1_configure_rpf(ctx, job); + + /* Setup the destination picture */ + fdp1_configure_wpf(ctx, job); + + /* Line Memory Pixel Number Register for linear access */ + fdp1_write(fdp1, FD1_IPC_LMEM_LINEAR, FD1_IPC_LMEM); + + /* Enable Interrupts */ + fdp1_write(fdp1, FD1_CTL_IRQ_MASK, FD1_CTL_IRQENB); + + /* Finally, the Immediate Registers */ + + /* This job is now in the HW queue */ + queue_hw_job(fdp1, job); + + /* Start the command */ + fdp1_write(fdp1, FD1_CTL_CMD_STRCMD, FD1_CTL_CMD); + + /* Registers will update to HW at next VINT */ + fdp1_write(fdp1, FD1_CTL_REGEND_REGEND, FD1_CTL_REGEND); + + /* Enable VINT Generator */ + fdp1_write(fdp1, FD1_CTL_SGCMD_SGEN, FD1_CTL_SGCMD); + + spin_unlock_irqrestore(&fdp1->device_process_lock, flags); + + return 0; +} + +/* + * mem2mem callbacks + */ + +/* + * job_ready() - check whether an instance is ready to be scheduled to run + */ +static int fdp1_m2m_job_ready(void *priv) +{ + struct fdp1_ctx *ctx = priv; + struct fdp1_q_data *src_q_data = &ctx->out_q; + int srcbufs = 1; + int dstbufs = 1; + + dprintk(ctx->fdp1, "+ Src: %d : Dst: %d\n", + v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx), + v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx)); + + /* One output buffer is required for each field */ + if (V4L2_FIELD_HAS_BOTH(src_q_data->format.field)) + dstbufs = 2; + + if (v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) < srcbufs + || v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx) < dstbufs) { + dprintk(ctx->fdp1, "Not enough buffers available\n"); + return 0; + } + + return 1; +} + +static void fdp1_m2m_job_abort(void *priv) +{ + struct fdp1_ctx *ctx = priv; + + dprintk(ctx->fdp1, "+\n"); + + /* Will cancel the transaction in the next interrupt handler */ + ctx->aborting = 1; + + /* Immediate abort sequence */ + fdp1_write(ctx->fdp1, 0, FD1_CTL_SGCMD); + fdp1_write(ctx->fdp1, FD1_CTL_SRESET_SRST, FD1_CTL_SRESET); +} + +/* + * fdp1_prepare_job: Prepare and queue a new job for a single action of work + * + * Prepare the next field, (or frame in progressive) and an output + * buffer for the hardware to perform a single operation. + */ +static struct fdp1_job *fdp1_prepare_job(struct fdp1_ctx *ctx) +{ + struct vb2_v4l2_buffer *vbuf; + struct fdp1_buffer *fbuf; + struct fdp1_dev *fdp1 = ctx->fdp1; + struct fdp1_job *job; + unsigned int buffers_required = 1; + + dprintk(fdp1, "+\n"); + + if (FDP1_DEINT_MODE_USES_NEXT(ctx->deint_mode)) + buffers_required = 2; + + if (ctx->buffers_queued < buffers_required) + return NULL; + + job = fdp1_job_alloc(fdp1); + if (!job) { + dprintk(fdp1, "No free jobs currently available\n"); + return NULL; + } + + job->active = fdp1_dequeue_field(ctx); + if (!job->active) { + /* Buffer check should prevent this ever happening */ + dprintk(fdp1, "No input buffers currently available\n"); + + fdp1_job_free(fdp1, job); + return NULL; + } + + dprintk(fdp1, "+ Buffer en-route...\n"); + + /* Source buffers have been prepared on our buffer_queue + * Prepare our Output buffer + */ + vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); + fbuf = to_fdp1_buffer(vbuf); + job->dst = &fbuf->fields[0]; + + job->active->vb->sequence = ctx->sequence; + job->dst->vb->sequence = ctx->sequence; + ctx->sequence++; + + if (FDP1_DEINT_MODE_USES_PREV(ctx->deint_mode)) { + job->previous = ctx->previous; + + /* Active buffer becomes the next job's previous buffer */ + ctx->previous = job->active; + } + + if (FDP1_DEINT_MODE_USES_NEXT(ctx->deint_mode)) { + /* Must be called after 'active' is dequeued */ + job->next = fdp1_peek_queued_field(ctx); + } + + /* Transfer timestamps and flags from src->dst */ + + job->dst->vb->vb2_buf.timestamp = job->active->vb->vb2_buf.timestamp; + + job->dst->vb->flags = job->active->vb->flags & + V4L2_BUF_FLAG_TSTAMP_SRC_MASK; + + /* Ideally, the frame-end function will just 'check' to see + * if there are more jobs instead + */ + ctx->translen++; + + /* Finally, Put this job on the processing queue */ + queue_job(fdp1, job); + + dprintk(fdp1, "Job Queued translen = %d\n", ctx->translen); + + return job; +} + +/* fdp1_m2m_device_run() - prepares and starts the device for an M2M task + * + * A single input buffer is taken and serialised into our fdp1_buffer + * queue. The queue is then processed to create as many jobs as possible + * from our available input. + */ +static void fdp1_m2m_device_run(void *priv) +{ + struct fdp1_ctx *ctx = priv; + struct fdp1_dev *fdp1 = ctx->fdp1; + struct vb2_v4l2_buffer *src_vb; + struct fdp1_buffer *buf; + unsigned int i; + + dprintk(fdp1, "+\n"); + + ctx->translen = 0; + + /* Get our incoming buffer of either one or two fields, or one frame */ + src_vb = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); + buf = to_fdp1_buffer(src_vb); + + for (i = 0; i < buf->num_fields; i++) { + struct fdp1_field_buffer *fbuf = &buf->fields[i]; + + fdp1_queue_field(ctx, fbuf); + dprintk(fdp1, "Queued Buffer [%d] last_field:%d\n", + i, fbuf->last_field); + } + + /* Queue as many jobs as our data provides for */ + while (fdp1_prepare_job(ctx)) + ; + + if (ctx->translen == 0) { + dprintk(fdp1, "No jobs were processed. M2M action complete\n"); + v4l2_m2m_job_finish(fdp1->m2m_dev, ctx->fh.m2m_ctx); + return; + } + + /* Kick the job processing action */ + fdp1_device_process(ctx); +} + +/* + * device_frame_end: + * + * Handles the M2M level after a buffer completion event. + */ +static void device_frame_end(struct fdp1_dev *fdp1, + enum vb2_buffer_state state) +{ + struct fdp1_ctx *ctx; + unsigned long flags; + struct fdp1_job *job = get_hw_queued_job(fdp1); + + dprintk(fdp1, "+\n"); + + ctx = v4l2_m2m_get_curr_priv(fdp1->m2m_dev); + + if (ctx == NULL) { + v4l2_err(&fdp1->v4l2_dev, + "Instance released before the end of transaction\n"); + return; + } + + ctx->num_processed++; + + /* + * fdp1_field_complete will call buf_done only when the last vb2_buffer + * reference is complete + */ + if (FDP1_DEINT_MODE_USES_PREV(ctx->deint_mode)) + fdp1_field_complete(ctx, job->previous); + else + fdp1_field_complete(ctx, job->active); + + spin_lock_irqsave(&fdp1->irqlock, flags); + v4l2_m2m_buf_done(job->dst->vb, state); + job->dst = NULL; + spin_unlock_irqrestore(&fdp1->irqlock, flags); + + /* Move this job back to the free job list */ + fdp1_job_free(fdp1, job); + + dprintk(fdp1, "curr_ctx->num_processed %d curr_ctx->translen %d\n", + ctx->num_processed, ctx->translen); + + if (ctx->num_processed == ctx->translen || + ctx->aborting) { + dprintk(ctx->fdp1, "Finishing transaction\n"); + ctx->num_processed = 0; + v4l2_m2m_job_finish(fdp1->m2m_dev, ctx->fh.m2m_ctx); + } else { + /* + * For pipelined performance support, this would + * be called from a VINT handler + */ + fdp1_device_process(ctx); + } +} + +/* + * video ioctls + */ +static int fdp1_vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + strscpy(cap->driver, DRIVER_NAME, sizeof(cap->driver)); + strscpy(cap->card, DRIVER_NAME, sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", DRIVER_NAME); + return 0; +} + +static int fdp1_enum_fmt(struct v4l2_fmtdesc *f, u32 type) +{ + unsigned int i, num; + + num = 0; + + for (i = 0; i < ARRAY_SIZE(fdp1_formats); ++i) { + if (fdp1_formats[i].types & type) { + if (num == f->index) + break; + ++num; + } + } + + /* Format not found */ + if (i >= ARRAY_SIZE(fdp1_formats)) + return -EINVAL; + + /* Format found */ + f->pixelformat = fdp1_formats[i].fourcc; + + return 0; +} + +static int fdp1_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return fdp1_enum_fmt(f, FDP1_CAPTURE); +} + +static int fdp1_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + return fdp1_enum_fmt(f, FDP1_OUTPUT); +} + +static int fdp1_g_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct fdp1_q_data *q_data; + struct fdp1_ctx *ctx = fh_to_ctx(priv); + + if (!v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type)) + return -EINVAL; + + q_data = get_q_data(ctx, f->type); + f->fmt.pix_mp = q_data->format; + + return 0; +} + +static void fdp1_compute_stride(struct v4l2_pix_format_mplane *pix, + const struct fdp1_fmt *fmt) +{ + unsigned int i; + + /* Compute and clamp the stride and image size. */ + for (i = 0; i < min_t(unsigned int, fmt->num_planes, 2U); ++i) { + unsigned int hsub = i > 0 ? fmt->hsub : 1; + unsigned int vsub = i > 0 ? fmt->vsub : 1; + /* From VSP : TODO: Confirm alignment limits for FDP1 */ + unsigned int align = 128; + unsigned int bpl; + + bpl = clamp_t(unsigned int, pix->plane_fmt[i].bytesperline, + pix->width / hsub * fmt->bpp[i] / 8, + round_down(FDP1_MAX_STRIDE, align)); + + pix->plane_fmt[i].bytesperline = round_up(bpl, align); + pix->plane_fmt[i].sizeimage = pix->plane_fmt[i].bytesperline + * pix->height / vsub; + + } + + if (fmt->num_planes == 3) { + /* The two chroma planes must have the same stride. */ + pix->plane_fmt[2].bytesperline = pix->plane_fmt[1].bytesperline; + pix->plane_fmt[2].sizeimage = pix->plane_fmt[1].sizeimage; + + } +} + +static void fdp1_try_fmt_output(struct fdp1_ctx *ctx, + const struct fdp1_fmt **fmtinfo, + struct v4l2_pix_format_mplane *pix) +{ + const struct fdp1_fmt *fmt; + unsigned int width; + unsigned int height; + + /* Validate the pixel format to ensure the output queue supports it. */ + fmt = fdp1_find_format(pix->pixelformat); + if (!fmt || !(fmt->types & FDP1_OUTPUT)) + fmt = fdp1_find_format(V4L2_PIX_FMT_YUYV); + + if (fmtinfo) + *fmtinfo = fmt; + + pix->pixelformat = fmt->fourcc; + pix->num_planes = fmt->num_planes; + + /* + * Progressive video and all interlaced field orders are acceptable. + * Default to V4L2_FIELD_INTERLACED. + */ + if (pix->field != V4L2_FIELD_NONE && + pix->field != V4L2_FIELD_ALTERNATE && + !V4L2_FIELD_HAS_BOTH(pix->field)) + pix->field = V4L2_FIELD_INTERLACED; + + /* + * The deinterlacer doesn't care about the colorspace, accept all values + * and default to V4L2_COLORSPACE_SMPTE170M. The YUV to RGB conversion + * at the output of the deinterlacer supports a subset of encodings and + * quantization methods and will only be available when the colorspace + * allows it. + */ + if (pix->colorspace == V4L2_COLORSPACE_DEFAULT) + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + + /* + * Align the width and height for YUV 4:2:2 and 4:2:0 formats and clamp + * them to the supported frame size range. The height boundary are + * related to the full frame, divide them by two when the format passes + * fields in separate buffers. + */ + width = round_down(pix->width, fmt->hsub); + pix->width = clamp(width, FDP1_MIN_W, FDP1_MAX_W); + + height = round_down(pix->height, fmt->vsub); + if (pix->field == V4L2_FIELD_ALTERNATE) + pix->height = clamp(height, FDP1_MIN_H / 2, FDP1_MAX_H / 2); + else + pix->height = clamp(height, FDP1_MIN_H, FDP1_MAX_H); + + fdp1_compute_stride(pix, fmt); +} + +static void fdp1_try_fmt_capture(struct fdp1_ctx *ctx, + const struct fdp1_fmt **fmtinfo, + struct v4l2_pix_format_mplane *pix) +{ + struct fdp1_q_data *src_data = &ctx->out_q; + enum v4l2_colorspace colorspace; + enum v4l2_ycbcr_encoding ycbcr_enc; + enum v4l2_quantization quantization; + const struct fdp1_fmt *fmt; + bool allow_rgb; + + /* + * Validate the pixel format. We can only accept RGB output formats if + * the input encoding and quantization are compatible with the format + * conversions supported by the hardware. The supported combinations are + * + * V4L2_YCBCR_ENC_601 + V4L2_QUANTIZATION_LIM_RANGE + * V4L2_YCBCR_ENC_601 + V4L2_QUANTIZATION_FULL_RANGE + * V4L2_YCBCR_ENC_709 + V4L2_QUANTIZATION_LIM_RANGE + */ + colorspace = src_data->format.colorspace; + + ycbcr_enc = src_data->format.ycbcr_enc; + if (ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT) + ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(colorspace); + + quantization = src_data->format.quantization; + if (quantization == V4L2_QUANTIZATION_DEFAULT) + quantization = V4L2_MAP_QUANTIZATION_DEFAULT(false, colorspace, + ycbcr_enc); + + allow_rgb = ycbcr_enc == V4L2_YCBCR_ENC_601 || + (ycbcr_enc == V4L2_YCBCR_ENC_709 && + quantization == V4L2_QUANTIZATION_LIM_RANGE); + + fmt = fdp1_find_format(pix->pixelformat); + if (!fmt || (!allow_rgb && fdp1_fmt_is_rgb(fmt))) + fmt = fdp1_find_format(V4L2_PIX_FMT_YUYV); + + if (fmtinfo) + *fmtinfo = fmt; + + pix->pixelformat = fmt->fourcc; + pix->num_planes = fmt->num_planes; + pix->field = V4L2_FIELD_NONE; + + /* + * The colorspace on the capture queue is copied from the output queue + * as the hardware can't change the colorspace. It can convert YCbCr to + * RGB though, in which case the encoding and quantization are set to + * default values as anything else wouldn't make sense. + */ + pix->colorspace = src_data->format.colorspace; + pix->xfer_func = src_data->format.xfer_func; + + if (fdp1_fmt_is_rgb(fmt)) { + pix->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + pix->quantization = V4L2_QUANTIZATION_DEFAULT; + } else { + pix->ycbcr_enc = src_data->format.ycbcr_enc; + pix->quantization = src_data->format.quantization; + } + + /* + * The frame width is identical to the output queue, and the height is + * either doubled or identical depending on whether the output queue + * field order contains one or two fields per frame. + */ + pix->width = src_data->format.width; + if (src_data->format.field == V4L2_FIELD_ALTERNATE) + pix->height = 2 * src_data->format.height; + else + pix->height = src_data->format.height; + + fdp1_compute_stride(pix, fmt); +} + +static int fdp1_try_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct fdp1_ctx *ctx = fh_to_ctx(priv); + + if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + fdp1_try_fmt_output(ctx, NULL, &f->fmt.pix_mp); + else + fdp1_try_fmt_capture(ctx, NULL, &f->fmt.pix_mp); + + dprintk(ctx->fdp1, "Try %s format: %4.4s (0x%08x) %ux%u field %u\n", + V4L2_TYPE_IS_OUTPUT(f->type) ? "output" : "capture", + (char *)&f->fmt.pix_mp.pixelformat, f->fmt.pix_mp.pixelformat, + f->fmt.pix_mp.width, f->fmt.pix_mp.height, f->fmt.pix_mp.field); + + return 0; +} + +static void fdp1_set_format(struct fdp1_ctx *ctx, + struct v4l2_pix_format_mplane *pix, + enum v4l2_buf_type type) +{ + struct fdp1_q_data *q_data = get_q_data(ctx, type); + const struct fdp1_fmt *fmtinfo; + + if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + fdp1_try_fmt_output(ctx, &fmtinfo, pix); + else + fdp1_try_fmt_capture(ctx, &fmtinfo, pix); + + q_data->fmt = fmtinfo; + q_data->format = *pix; + + q_data->vsize = pix->height; + if (pix->field != V4L2_FIELD_NONE) + q_data->vsize /= 2; + + q_data->stride_y = pix->plane_fmt[0].bytesperline; + q_data->stride_c = pix->plane_fmt[1].bytesperline; + + /* Adjust strides for interleaved buffers */ + if (pix->field == V4L2_FIELD_INTERLACED || + pix->field == V4L2_FIELD_INTERLACED_TB || + pix->field == V4L2_FIELD_INTERLACED_BT) { + q_data->stride_y *= 2; + q_data->stride_c *= 2; + } + + /* Propagate the format from the output node to the capture node. */ + if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { + struct fdp1_q_data *dst_data = &ctx->cap_q; + + /* + * Copy the format, clear the per-plane bytes per line and image + * size, override the field and double the height if needed. + */ + dst_data->format = q_data->format; + memset(dst_data->format.plane_fmt, 0, + sizeof(dst_data->format.plane_fmt)); + + dst_data->format.field = V4L2_FIELD_NONE; + if (pix->field == V4L2_FIELD_ALTERNATE) + dst_data->format.height *= 2; + + fdp1_try_fmt_capture(ctx, &dst_data->fmt, &dst_data->format); + + dst_data->vsize = dst_data->format.height; + dst_data->stride_y = dst_data->format.plane_fmt[0].bytesperline; + dst_data->stride_c = dst_data->format.plane_fmt[1].bytesperline; + } +} + +static int fdp1_s_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct fdp1_ctx *ctx = fh_to_ctx(priv); + struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx; + struct vb2_queue *vq = v4l2_m2m_get_vq(m2m_ctx, f->type); + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->fdp1->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + fdp1_set_format(ctx, &f->fmt.pix_mp, f->type); + + dprintk(ctx->fdp1, "Set %s format: %4.4s (0x%08x) %ux%u field %u\n", + V4L2_TYPE_IS_OUTPUT(f->type) ? "output" : "capture", + (char *)&f->fmt.pix_mp.pixelformat, f->fmt.pix_mp.pixelformat, + f->fmt.pix_mp.width, f->fmt.pix_mp.height, f->fmt.pix_mp.field); + + return 0; +} + +static int fdp1_g_ctrl(struct v4l2_ctrl *ctrl) +{ + struct fdp1_ctx *ctx = + container_of(ctrl->handler, struct fdp1_ctx, hdl); + struct fdp1_q_data *src_q_data = &ctx->out_q; + + switch (ctrl->id) { + case V4L2_CID_MIN_BUFFERS_FOR_CAPTURE: + if (V4L2_FIELD_HAS_BOTH(src_q_data->format.field)) + ctrl->val = 2; + else + ctrl->val = 1; + return 0; + } + + return 1; +} + +static int fdp1_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct fdp1_ctx *ctx = + container_of(ctrl->handler, struct fdp1_ctx, hdl); + + switch (ctrl->id) { + case V4L2_CID_ALPHA_COMPONENT: + ctx->alpha = ctrl->val; + break; + + case V4L2_CID_DEINTERLACING_MODE: + ctx->deint_mode = ctrl->val; + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops fdp1_ctrl_ops = { + .s_ctrl = fdp1_s_ctrl, + .g_volatile_ctrl = fdp1_g_ctrl, +}; + +static const char * const fdp1_ctrl_deint_menu[] = { + "Progressive", + "Adaptive 2D/3D", + "Fixed 2D", + "Fixed 3D", + "Previous field", + "Next field", + NULL +}; + +static const struct v4l2_ioctl_ops fdp1_ioctl_ops = { + .vidioc_querycap = fdp1_vidioc_querycap, + + .vidioc_enum_fmt_vid_cap = fdp1_enum_fmt_vid_cap, + .vidioc_enum_fmt_vid_out = fdp1_enum_fmt_vid_out, + .vidioc_g_fmt_vid_cap_mplane = fdp1_g_fmt, + .vidioc_g_fmt_vid_out_mplane = fdp1_g_fmt, + .vidioc_try_fmt_vid_cap_mplane = fdp1_try_fmt, + .vidioc_try_fmt_vid_out_mplane = fdp1_try_fmt, + .vidioc_s_fmt_vid_cap_mplane = fdp1_s_fmt, + .vidioc_s_fmt_vid_out_mplane = fdp1_s_fmt, + + .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs, + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, + .vidioc_qbuf = v4l2_m2m_ioctl_qbuf, + .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf, + .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf, + .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs, + .vidioc_expbuf = v4l2_m2m_ioctl_expbuf, + + .vidioc_streamon = v4l2_m2m_ioctl_streamon, + .vidioc_streamoff = v4l2_m2m_ioctl_streamoff, + + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +/* + * Queue operations + */ + +static int fdp1_queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], + struct device *alloc_ctxs[]) +{ + struct fdp1_ctx *ctx = vb2_get_drv_priv(vq); + struct fdp1_q_data *q_data; + unsigned int i; + + q_data = get_q_data(ctx, vq->type); + + if (*nplanes) { + if (*nplanes > FDP1_MAX_PLANES) + return -EINVAL; + + return 0; + } + + *nplanes = q_data->format.num_planes; + + for (i = 0; i < *nplanes; i++) + sizes[i] = q_data->format.plane_fmt[i].sizeimage; + + return 0; +} + +static void fdp1_buf_prepare_field(struct fdp1_q_data *q_data, + struct vb2_v4l2_buffer *vbuf, + unsigned int field_num) +{ + struct fdp1_buffer *buf = to_fdp1_buffer(vbuf); + struct fdp1_field_buffer *fbuf = &buf->fields[field_num]; + unsigned int num_fields; + unsigned int i; + + num_fields = V4L2_FIELD_HAS_BOTH(vbuf->field) ? 2 : 1; + + fbuf->vb = vbuf; + fbuf->last_field = (field_num + 1) == num_fields; + + for (i = 0; i < vbuf->vb2_buf.num_planes; ++i) + fbuf->addrs[i] = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, i); + + switch (vbuf->field) { + case V4L2_FIELD_INTERLACED: + /* + * Interlaced means bottom-top for 60Hz TV standards (NTSC) and + * top-bottom for 50Hz. As TV standards are not applicable to + * the mem-to-mem API, use the height as a heuristic. + */ + fbuf->field = (q_data->format.height < 576) == field_num + ? V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM; + break; + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_SEQ_TB: + fbuf->field = field_num ? V4L2_FIELD_BOTTOM : V4L2_FIELD_TOP; + break; + case V4L2_FIELD_INTERLACED_BT: + case V4L2_FIELD_SEQ_BT: + fbuf->field = field_num ? V4L2_FIELD_TOP : V4L2_FIELD_BOTTOM; + break; + default: + fbuf->field = vbuf->field; + break; + } + + /* Buffer is completed */ + if (!field_num) + return; + + /* Adjust buffer addresses for second field */ + switch (vbuf->field) { + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + for (i = 0; i < vbuf->vb2_buf.num_planes; i++) + fbuf->addrs[i] += + (i == 0 ? q_data->stride_y : q_data->stride_c); + break; + case V4L2_FIELD_SEQ_TB: + case V4L2_FIELD_SEQ_BT: + for (i = 0; i < vbuf->vb2_buf.num_planes; i++) + fbuf->addrs[i] += q_data->vsize * + (i == 0 ? q_data->stride_y : q_data->stride_c); + break; + } +} + +static int fdp1_buf_prepare(struct vb2_buffer *vb) +{ + struct fdp1_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct fdp1_q_data *q_data = get_q_data(ctx, vb->vb2_queue->type); + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct fdp1_buffer *buf = to_fdp1_buffer(vbuf); + unsigned int i; + + if (V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) { + bool field_valid = true; + + /* Validate the buffer field. */ + switch (q_data->format.field) { + case V4L2_FIELD_NONE: + if (vbuf->field != V4L2_FIELD_NONE) + field_valid = false; + break; + + case V4L2_FIELD_ALTERNATE: + if (vbuf->field != V4L2_FIELD_TOP && + vbuf->field != V4L2_FIELD_BOTTOM) + field_valid = false; + break; + + case V4L2_FIELD_INTERLACED: + case V4L2_FIELD_SEQ_TB: + case V4L2_FIELD_SEQ_BT: + case V4L2_FIELD_INTERLACED_TB: + case V4L2_FIELD_INTERLACED_BT: + if (vbuf->field != q_data->format.field) + field_valid = false; + break; + } + + if (!field_valid) { + dprintk(ctx->fdp1, + "buffer field %u invalid for format field %u\n", + vbuf->field, q_data->format.field); + return -EINVAL; + } + } else { + vbuf->field = V4L2_FIELD_NONE; + } + + /* Validate the planes sizes. */ + for (i = 0; i < q_data->format.num_planes; i++) { + unsigned long size = q_data->format.plane_fmt[i].sizeimage; + + if (vb2_plane_size(vb, i) < size) { + dprintk(ctx->fdp1, + "data will not fit into plane [%u/%u] (%lu < %lu)\n", + i, q_data->format.num_planes, + vb2_plane_size(vb, i), size); + return -EINVAL; + } + + /* We have known size formats all around */ + vb2_set_plane_payload(vb, i, size); + } + + buf->num_fields = V4L2_FIELD_HAS_BOTH(vbuf->field) ? 2 : 1; + for (i = 0; i < buf->num_fields; ++i) + fdp1_buf_prepare_field(q_data, vbuf, i); + + return 0; +} + +static void fdp1_buf_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct fdp1_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + + v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf); +} + +static int fdp1_start_streaming(struct vb2_queue *q, unsigned int count) +{ + struct fdp1_ctx *ctx = vb2_get_drv_priv(q); + struct fdp1_q_data *q_data = get_q_data(ctx, q->type); + + if (V4L2_TYPE_IS_OUTPUT(q->type)) { + /* + * Force our deint_mode when we are progressive, + * ignoring any setting on the device from the user, + * Otherwise, lock in the requested de-interlace mode. + */ + if (q_data->format.field == V4L2_FIELD_NONE) + ctx->deint_mode = FDP1_PROGRESSIVE; + + if (ctx->deint_mode == FDP1_ADAPT2D3D) { + u32 stride; + dma_addr_t smsk_base; + const u32 bpp = 2; /* bytes per pixel */ + + stride = round_up(q_data->format.width, 8); + + ctx->smsk_size = bpp * stride * q_data->vsize; + + ctx->smsk_cpu = dma_alloc_coherent(ctx->fdp1->dev, + ctx->smsk_size, &smsk_base, GFP_KERNEL); + + if (ctx->smsk_cpu == NULL) { + dprintk(ctx->fdp1, "Failed to alloc smsk\n"); + return -ENOMEM; + } + + ctx->smsk_addr[0] = smsk_base; + ctx->smsk_addr[1] = smsk_base + (ctx->smsk_size/2); + } + } + + return 0; +} + +static void fdp1_stop_streaming(struct vb2_queue *q) +{ + struct fdp1_ctx *ctx = vb2_get_drv_priv(q); + struct vb2_v4l2_buffer *vbuf; + unsigned long flags; + + while (1) { + if (V4L2_TYPE_IS_OUTPUT(q->type)) + vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); + else + vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); + if (vbuf == NULL) + break; + spin_lock_irqsave(&ctx->fdp1->irqlock, flags); + v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR); + spin_unlock_irqrestore(&ctx->fdp1->irqlock, flags); + } + + /* Empty Output queues */ + if (V4L2_TYPE_IS_OUTPUT(q->type)) { + /* Empty our internal queues */ + struct fdp1_field_buffer *fbuf; + + /* Free any queued buffers */ + fbuf = fdp1_dequeue_field(ctx); + while (fbuf != NULL) { + fdp1_field_complete(ctx, fbuf); + fbuf = fdp1_dequeue_field(ctx); + } + + /* Free smsk_data */ + if (ctx->smsk_cpu) { + dma_free_coherent(ctx->fdp1->dev, ctx->smsk_size, + ctx->smsk_cpu, ctx->smsk_addr[0]); + ctx->smsk_addr[0] = ctx->smsk_addr[1] = 0; + ctx->smsk_cpu = NULL; + } + + WARN(!list_empty(&ctx->fields_queue), + "Buffer queue not empty"); + } else { + /* Empty Capture queues (Jobs) */ + struct fdp1_job *job; + + job = get_queued_job(ctx->fdp1); + while (job) { + if (FDP1_DEINT_MODE_USES_PREV(ctx->deint_mode)) + fdp1_field_complete(ctx, job->previous); + else + fdp1_field_complete(ctx, job->active); + + v4l2_m2m_buf_done(job->dst->vb, VB2_BUF_STATE_ERROR); + job->dst = NULL; + + job = get_queued_job(ctx->fdp1); + } + + /* Free any held buffer in the ctx */ + fdp1_field_complete(ctx, ctx->previous); + + WARN(!list_empty(&ctx->fdp1->queued_job_list), + "Queued Job List not empty"); + + WARN(!list_empty(&ctx->fdp1->hw_job_list), + "HW Job list not empty"); + } +} + +static const struct vb2_ops fdp1_qops = { + .queue_setup = fdp1_queue_setup, + .buf_prepare = fdp1_buf_prepare, + .buf_queue = fdp1_buf_queue, + .start_streaming = fdp1_start_streaming, + .stop_streaming = fdp1_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +static int queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct fdp1_ctx *ctx = priv; + int ret; + + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct fdp1_buffer); + src_vq->ops = &fdp1_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + src_vq->lock = &ctx->fdp1->dev_mutex; + src_vq->dev = ctx->fdp1->dev; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct fdp1_buffer); + dst_vq->ops = &fdp1_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + dst_vq->lock = &ctx->fdp1->dev_mutex; + dst_vq->dev = ctx->fdp1->dev; + + return vb2_queue_init(dst_vq); +} + +/* + * File operations + */ +static int fdp1_open(struct file *file) +{ + struct fdp1_dev *fdp1 = video_drvdata(file); + struct v4l2_pix_format_mplane format; + struct fdp1_ctx *ctx = NULL; + struct v4l2_ctrl *ctrl; + int ret = 0; + + if (mutex_lock_interruptible(&fdp1->dev_mutex)) + return -ERESTARTSYS; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) { + ret = -ENOMEM; + goto done; + } + + v4l2_fh_init(&ctx->fh, video_devdata(file)); + file->private_data = &ctx->fh; + ctx->fdp1 = fdp1; + + /* Initialise Queues */ + INIT_LIST_HEAD(&ctx->fields_queue); + + ctx->translen = 1; + ctx->sequence = 0; + + /* Initialise controls */ + + v4l2_ctrl_handler_init(&ctx->hdl, 3); + v4l2_ctrl_new_std_menu_items(&ctx->hdl, &fdp1_ctrl_ops, + V4L2_CID_DEINTERLACING_MODE, + FDP1_NEXTFIELD, BIT(0), FDP1_FIXED3D, + fdp1_ctrl_deint_menu); + + ctrl = v4l2_ctrl_new_std(&ctx->hdl, &fdp1_ctrl_ops, + V4L2_CID_MIN_BUFFERS_FOR_CAPTURE, 1, 2, 1, 1); + if (ctrl) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE; + + v4l2_ctrl_new_std(&ctx->hdl, &fdp1_ctrl_ops, + V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 255); + + if (ctx->hdl.error) { + ret = ctx->hdl.error; + goto error_ctx; + } + + ctx->fh.ctrl_handler = &ctx->hdl; + v4l2_ctrl_handler_setup(&ctx->hdl); + + /* Configure default parameters. */ + memset(&format, 0, sizeof(format)); + fdp1_set_format(ctx, &format, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + + ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(fdp1->m2m_dev, ctx, &queue_init); + + if (IS_ERR(ctx->fh.m2m_ctx)) { + ret = PTR_ERR(ctx->fh.m2m_ctx); + goto error_ctx; + } + + /* Perform any power management required */ + ret = pm_runtime_resume_and_get(fdp1->dev); + if (ret < 0) + goto error_pm; + + v4l2_fh_add(&ctx->fh); + + dprintk(fdp1, "Created instance: %p, m2m_ctx: %p\n", + ctx, ctx->fh.m2m_ctx); + + mutex_unlock(&fdp1->dev_mutex); + return 0; + +error_pm: + v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); +error_ctx: + v4l2_ctrl_handler_free(&ctx->hdl); + kfree(ctx); +done: + mutex_unlock(&fdp1->dev_mutex); + return ret; +} + +static int fdp1_release(struct file *file) +{ + struct fdp1_dev *fdp1 = video_drvdata(file); + struct fdp1_ctx *ctx = fh_to_ctx(file->private_data); + + dprintk(fdp1, "Releasing instance %p\n", ctx); + + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + v4l2_ctrl_handler_free(&ctx->hdl); + mutex_lock(&fdp1->dev_mutex); + v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); + mutex_unlock(&fdp1->dev_mutex); + kfree(ctx); + + pm_runtime_put(fdp1->dev); + + return 0; +} + +static const struct v4l2_file_operations fdp1_fops = { + .owner = THIS_MODULE, + .open = fdp1_open, + .release = fdp1_release, + .poll = v4l2_m2m_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = v4l2_m2m_fop_mmap, +}; + +static const struct video_device fdp1_videodev = { + .name = DRIVER_NAME, + .vfl_dir = VFL_DIR_M2M, + .fops = &fdp1_fops, + .device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING, + .ioctl_ops = &fdp1_ioctl_ops, + .minor = -1, + .release = video_device_release_empty, +}; + +static const struct v4l2_m2m_ops m2m_ops = { + .device_run = fdp1_m2m_device_run, + .job_ready = fdp1_m2m_job_ready, + .job_abort = fdp1_m2m_job_abort, +}; + +static irqreturn_t fdp1_irq_handler(int irq, void *dev_id) +{ + struct fdp1_dev *fdp1 = dev_id; + u32 int_status; + u32 ctl_status; + u32 vint_cnt; + u32 cycles; + + int_status = fdp1_read(fdp1, FD1_CTL_IRQSTA); + cycles = fdp1_read(fdp1, FD1_CTL_VCYCLE_STAT); + ctl_status = fdp1_read(fdp1, FD1_CTL_STATUS); + vint_cnt = (ctl_status & FD1_CTL_STATUS_VINT_CNT_MASK) >> + FD1_CTL_STATUS_VINT_CNT_SHIFT; + + /* Clear interrupts */ + fdp1_write(fdp1, ~(int_status) & FD1_CTL_IRQ_MASK, FD1_CTL_IRQSTA); + + if (debug >= 2) { + dprintk(fdp1, "IRQ: 0x%x %s%s%s\n", int_status, + int_status & FD1_CTL_IRQ_VERE ? "[Error]" : "[!E]", + int_status & FD1_CTL_IRQ_VINTE ? "[VSync]" : "[!V]", + int_status & FD1_CTL_IRQ_FREE ? "[FrameEnd]" : "[!F]"); + + dprintk(fdp1, "CycleStatus = %d (%dms)\n", + cycles, cycles/(fdp1->clk_rate/1000)); + + dprintk(fdp1, + "Control Status = 0x%08x : VINT_CNT = %d %s:%s:%s:%s\n", + ctl_status, vint_cnt, + ctl_status & FD1_CTL_STATUS_SGREGSET ? "RegSet" : "", + ctl_status & FD1_CTL_STATUS_SGVERR ? "Vsync Error" : "", + ctl_status & FD1_CTL_STATUS_SGFREND ? "FrameEnd" : "", + ctl_status & FD1_CTL_STATUS_BSY ? "Busy" : ""); + dprintk(fdp1, "***********************************\n"); + } + + /* Spurious interrupt */ + if (!(FD1_CTL_IRQ_MASK & int_status)) + return IRQ_NONE; + + /* Work completed, release the frame */ + if (FD1_CTL_IRQ_VERE & int_status) + device_frame_end(fdp1, VB2_BUF_STATE_ERROR); + else if (FD1_CTL_IRQ_FREE & int_status) + device_frame_end(fdp1, VB2_BUF_STATE_DONE); + + return IRQ_HANDLED; +} + +static int fdp1_probe(struct platform_device *pdev) +{ + struct fdp1_dev *fdp1; + struct video_device *vfd; + struct device_node *fcp_node; + struct clk *clk; + unsigned int i; + + int ret; + int hw_version; + + fdp1 = devm_kzalloc(&pdev->dev, sizeof(*fdp1), GFP_KERNEL); + if (!fdp1) + return -ENOMEM; + + INIT_LIST_HEAD(&fdp1->free_job_list); + INIT_LIST_HEAD(&fdp1->queued_job_list); + INIT_LIST_HEAD(&fdp1->hw_job_list); + + /* Initialise the jobs on the free list */ + for (i = 0; i < ARRAY_SIZE(fdp1->jobs); i++) + list_add(&fdp1->jobs[i].list, &fdp1->free_job_list); + + mutex_init(&fdp1->dev_mutex); + + spin_lock_init(&fdp1->irqlock); + spin_lock_init(&fdp1->device_process_lock); + fdp1->dev = &pdev->dev; + platform_set_drvdata(pdev, fdp1); + + /* Memory-mapped registers */ + fdp1->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(fdp1->regs)) + return PTR_ERR(fdp1->regs); + + /* Interrupt service routine registration */ + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + fdp1->irq = ret; + + ret = devm_request_irq(&pdev->dev, fdp1->irq, fdp1_irq_handler, 0, + dev_name(&pdev->dev), fdp1); + if (ret) { + dev_err(&pdev->dev, "cannot claim IRQ %d\n", fdp1->irq); + return ret; + } + + /* FCP */ + fcp_node = of_parse_phandle(pdev->dev.of_node, "renesas,fcp", 0); + if (fcp_node) { + fdp1->fcp = rcar_fcp_get(fcp_node); + of_node_put(fcp_node); + if (IS_ERR(fdp1->fcp)) { + dev_dbg(&pdev->dev, "FCP not found (%ld)\n", + PTR_ERR(fdp1->fcp)); + return PTR_ERR(fdp1->fcp); + } + } + + /* Determine our clock rate */ + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto put_dev; + } + + fdp1->clk_rate = clk_get_rate(clk); + clk_put(clk); + + /* V4L2 device registration */ + ret = v4l2_device_register(&pdev->dev, &fdp1->v4l2_dev); + if (ret) { + v4l2_err(&fdp1->v4l2_dev, "Failed to register video device\n"); + goto put_dev; + } + + /* M2M registration */ + fdp1->m2m_dev = v4l2_m2m_init(&m2m_ops); + if (IS_ERR(fdp1->m2m_dev)) { + v4l2_err(&fdp1->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(fdp1->m2m_dev); + goto unreg_dev; + } + + /* Video registration */ + fdp1->vfd = fdp1_videodev; + vfd = &fdp1->vfd; + vfd->lock = &fdp1->dev_mutex; + vfd->v4l2_dev = &fdp1->v4l2_dev; + video_set_drvdata(vfd, fdp1); + strscpy(vfd->name, fdp1_videodev.name, sizeof(vfd->name)); + + ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0); + if (ret) { + v4l2_err(&fdp1->v4l2_dev, "Failed to register video device\n"); + goto release_m2m; + } + + v4l2_info(&fdp1->v4l2_dev, "Device registered as /dev/video%d\n", + vfd->num); + + /* Power up the cells to read HW */ + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_resume_and_get(fdp1->dev); + if (ret < 0) + goto disable_pm; + + hw_version = fdp1_read(fdp1, FD1_IP_INTDATA); + switch (hw_version) { + case FD1_IP_H3_ES1: + dprintk(fdp1, "FDP1 Version R-Car H3 ES1\n"); + break; + case FD1_IP_M3W: + dprintk(fdp1, "FDP1 Version R-Car M3-W\n"); + break; + case FD1_IP_H3: + dprintk(fdp1, "FDP1 Version R-Car H3\n"); + break; + case FD1_IP_M3N: + dprintk(fdp1, "FDP1 Version R-Car M3-N\n"); + break; + case FD1_IP_E3: + dprintk(fdp1, "FDP1 Version R-Car E3\n"); + break; + default: + dev_err(fdp1->dev, "FDP1 Unidentifiable (0x%08x)\n", + hw_version); + } + + /* Allow the hw to sleep until an open call puts it to use */ + pm_runtime_put(fdp1->dev); + + return 0; + +disable_pm: + pm_runtime_disable(fdp1->dev); + +release_m2m: + v4l2_m2m_release(fdp1->m2m_dev); + +unreg_dev: + v4l2_device_unregister(&fdp1->v4l2_dev); + +put_dev: + rcar_fcp_put(fdp1->fcp); + return ret; +} + +static int fdp1_remove(struct platform_device *pdev) +{ + struct fdp1_dev *fdp1 = platform_get_drvdata(pdev); + + v4l2_m2m_release(fdp1->m2m_dev); + video_unregister_device(&fdp1->vfd); + v4l2_device_unregister(&fdp1->v4l2_dev); + pm_runtime_disable(&pdev->dev); + rcar_fcp_put(fdp1->fcp); + + return 0; +} + +static int __maybe_unused fdp1_pm_runtime_suspend(struct device *dev) +{ + struct fdp1_dev *fdp1 = dev_get_drvdata(dev); + + rcar_fcp_disable(fdp1->fcp); + + return 0; +} + +static int __maybe_unused fdp1_pm_runtime_resume(struct device *dev) +{ + struct fdp1_dev *fdp1 = dev_get_drvdata(dev); + + /* Program in the static LUTs */ + fdp1_set_lut(fdp1); + + return rcar_fcp_enable(fdp1->fcp); +} + +static const struct dev_pm_ops fdp1_pm_ops = { + SET_RUNTIME_PM_OPS(fdp1_pm_runtime_suspend, + fdp1_pm_runtime_resume, + NULL) +}; + +static const struct of_device_id fdp1_dt_ids[] = { + { .compatible = "renesas,fdp1" }, + { }, +}; +MODULE_DEVICE_TABLE(of, fdp1_dt_ids); + +static struct platform_driver fdp1_pdrv = { + .probe = fdp1_probe, + .remove = fdp1_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = fdp1_dt_ids, + .pm = &fdp1_pm_ops, + }, +}; + +module_platform_driver(fdp1_pdrv); + +MODULE_DESCRIPTION("Renesas R-Car Fine Display Processor Driver"); +MODULE_AUTHOR("Kieran Bingham <kieran@bingham.xyz>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/media/platform/renesas/rcar_jpu.c b/drivers/media/platform/renesas/rcar_jpu.c new file mode 100644 index 000000000..2f4377cfb --- /dev/null +++ b/drivers/media/platform/renesas/rcar_jpu.c @@ -0,0 +1,1762 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Author: Mikhail Ulyanov + * Copyright (C) 2014-2015 Cogent Embedded, Inc. <source@cogentembedded.com> + * Copyright (C) 2014-2015 Renesas Electronics Corporation + * + * This is based on the drivers/media/platform/samsung/s5p-jpeg driver by + * Andrzej Pietrasiewicz and Jacek Anaszewski. + * Some portions of code inspired by VSP1 driver by Laurent Pinchart. + * + * TODO in order of priority: + * 1) Rotation + * 2) Cropping + * 3) V4L2_CID_JPEG_ACTIVE_MARKER + */ + +#include <asm/unaligned.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-mem2mem.h> +#include <media/v4l2-ioctl.h> +#include <media/videobuf2-v4l2.h> +#include <media/videobuf2-dma-contig.h> + + +#define DRV_NAME "rcar_jpu" + +/* + * Align JPEG header end to cache line to make sure we will not have any issues + * with cache; additionally to requirement (33.3.27 R01UH0501EJ0100 Rev.1.00) + */ +#define JPU_JPEG_HDR_SIZE (ALIGN(0x258, L1_CACHE_BYTES)) +#define JPU_JPEG_MAX_BYTES_PER_PIXEL 2 /* 16 bit precision format */ +#define JPU_JPEG_MIN_SIZE 25 /* SOI + SOF + EOI */ +#define JPU_JPEG_QTBL_SIZE 0x40 +#define JPU_JPEG_HDCTBL_SIZE 0x1c +#define JPU_JPEG_HACTBL_SIZE 0xb2 +#define JPU_JPEG_HEIGHT_OFFSET 0x91 +#define JPU_JPEG_WIDTH_OFFSET 0x93 +#define JPU_JPEG_SUBS_OFFSET 0x97 +#define JPU_JPEG_QTBL_LUM_OFFSET 0x07 +#define JPU_JPEG_QTBL_CHR_OFFSET 0x4c +#define JPU_JPEG_HDCTBL_LUM_OFFSET 0xa4 +#define JPU_JPEG_HACTBL_LUM_OFFSET 0xc5 +#define JPU_JPEG_HDCTBL_CHR_OFFSET 0x17c +#define JPU_JPEG_HACTBL_CHR_OFFSET 0x19d +#define JPU_JPEG_PADDING_OFFSET 0x24f +#define JPU_JPEG_LUM 0x00 +#define JPU_JPEG_CHR 0x01 +#define JPU_JPEG_DC 0x00 +#define JPU_JPEG_AC 0x10 + +#define JPU_JPEG_422 0x21 +#define JPU_JPEG_420 0x22 + +#define JPU_JPEG_DEFAULT_422_PIX_FMT V4L2_PIX_FMT_NV16M +#define JPU_JPEG_DEFAULT_420_PIX_FMT V4L2_PIX_FMT_NV12M + +/* JPEG markers */ +#define TEM 0x01 +#define SOF0 0xc0 +#define RST 0xd0 +#define SOI 0xd8 +#define EOI 0xd9 +#define DHP 0xde +#define DHT 0xc4 +#define COM 0xfe +#define DQT 0xdb +#define DRI 0xdd +#define APP0 0xe0 + +#define JPU_RESET_TIMEOUT 100 /* ms */ +#define JPU_JOB_TIMEOUT 300 /* ms */ +#define JPU_MAX_QUALITY 4 +#define JPU_WIDTH_MIN 16 +#define JPU_HEIGHT_MIN 16 +#define JPU_WIDTH_MAX 4096 +#define JPU_HEIGHT_MAX 4096 +#define JPU_MEMALIGN 8 + +/* Flags that indicate a format can be used for capture/output */ +#define JPU_FMT_TYPE_OUTPUT 0 +#define JPU_FMT_TYPE_CAPTURE 1 +#define JPU_ENC_CAPTURE (1 << 0) +#define JPU_ENC_OUTPUT (1 << 1) +#define JPU_DEC_CAPTURE (1 << 2) +#define JPU_DEC_OUTPUT (1 << 3) + +/* + * JPEG registers and bits + */ + +/* JPEG code mode register */ +#define JCMOD 0x00 +#define JCMOD_PCTR (1 << 7) +#define JCMOD_MSKIP_ENABLE (1 << 5) +#define JCMOD_DSP_ENC (0 << 3) +#define JCMOD_DSP_DEC (1 << 3) +#define JCMOD_REDU (7 << 0) +#define JCMOD_REDU_422 (1 << 0) +#define JCMOD_REDU_420 (2 << 0) + +/* JPEG code command register */ +#define JCCMD 0x04 +#define JCCMD_SRST (1 << 12) +#define JCCMD_JEND (1 << 2) +#define JCCMD_JSRT (1 << 0) + +/* JPEG code quantization table number register */ +#define JCQTN 0x0c +#define JCQTN_SHIFT(t) (((t) - 1) << 1) + +/* JPEG code Huffman table number register */ +#define JCHTN 0x10 +#define JCHTN_AC_SHIFT(t) (((t) << 1) - 1) +#define JCHTN_DC_SHIFT(t) (((t) - 1) << 1) + +#define JCVSZU 0x1c /* JPEG code vertical size upper register */ +#define JCVSZD 0x20 /* JPEG code vertical size lower register */ +#define JCHSZU 0x24 /* JPEG code horizontal size upper register */ +#define JCHSZD 0x28 /* JPEG code horizontal size lower register */ +#define JCSZ_MASK 0xff /* JPEG code h/v size register contains only 1 byte*/ + +#define JCDTCU 0x2c /* JPEG code data count upper register */ +#define JCDTCM 0x30 /* JPEG code data count middle register */ +#define JCDTCD 0x34 /* JPEG code data count lower register */ + +/* JPEG interrupt enable register */ +#define JINTE 0x38 +#define JINTE_ERR (7 << 5) /* INT5 + INT6 + INT7 */ +#define JINTE_TRANSF_COMPL (1 << 10) + +/* JPEG interrupt status register */ +#define JINTS 0x3c +#define JINTS_MASK 0x7c68 +#define JINTS_ERR (1 << 5) +#define JINTS_PROCESS_COMPL (1 << 6) +#define JINTS_TRANSF_COMPL (1 << 10) + +#define JCDERR 0x40 /* JPEG code decode error register */ +#define JCDERR_MASK 0xf /* JPEG code decode error register mask*/ + +/* JPEG interface encoding */ +#define JIFECNT 0x70 +#define JIFECNT_INFT_422 0 +#define JIFECNT_INFT_420 1 +#define JIFECNT_SWAP_WB (3 << 4) /* to JPU */ + +#define JIFESYA1 0x74 /* encode source Y address register 1 */ +#define JIFESCA1 0x78 /* encode source C address register 1 */ +#define JIFESYA2 0x7c /* encode source Y address register 2 */ +#define JIFESCA2 0x80 /* encode source C address register 2 */ +#define JIFESMW 0x84 /* encode source memory width register */ +#define JIFESVSZ 0x88 /* encode source vertical size register */ +#define JIFESHSZ 0x8c /* encode source horizontal size register */ +#define JIFEDA1 0x90 /* encode destination address register 1 */ +#define JIFEDA2 0x94 /* encode destination address register 2 */ + +/* JPEG decoding control register */ +#define JIFDCNT 0xa0 +#define JIFDCNT_SWAP_WB (3 << 1) /* from JPU */ + +#define JIFDSA1 0xa4 /* decode source address register 1 */ +#define JIFDDMW 0xb0 /* decode destination memory width register */ +#define JIFDDVSZ 0xb4 /* decode destination vert. size register */ +#define JIFDDHSZ 0xb8 /* decode destination horiz. size register */ +#define JIFDDYA1 0xbc /* decode destination Y address register 1 */ +#define JIFDDCA1 0xc0 /* decode destination C address register 1 */ + +#define JCQTBL(n) (0x10000 + (n) * 0x40) /* quantization tables regs */ +#define JCHTBD(n) (0x10100 + (n) * 0x100) /* Huffman table DC regs */ +#define JCHTBA(n) (0x10120 + (n) * 0x100) /* Huffman table AC regs */ + +/** + * struct jpu - JPEG IP abstraction + * @mutex: the mutex protecting this structure + * @lock: spinlock protecting the device contexts + * @v4l2_dev: v4l2 device for mem2mem mode + * @vfd_encoder: video device node for encoder mem2mem mode + * @vfd_decoder: video device node for decoder mem2mem mode + * @m2m_dev: v4l2 mem2mem device data + * @curr: pointer to current context + * @regs: JPEG IP registers mapping + * @irq: JPEG IP irq + * @clk: JPEG IP clock + * @dev: JPEG IP struct device + * @ref_count: reference counter + */ +struct jpu { + struct mutex mutex; + spinlock_t lock; + struct v4l2_device v4l2_dev; + struct video_device vfd_encoder; + struct video_device vfd_decoder; + struct v4l2_m2m_dev *m2m_dev; + struct jpu_ctx *curr; + + void __iomem *regs; + unsigned int irq; + struct clk *clk; + struct device *dev; + int ref_count; +}; + +/** + * struct jpu_buffer - driver's specific video buffer + * @buf: m2m buffer + * @compr_quality: destination image quality in compression mode + * @subsampling: source image subsampling in decompression mode + */ +struct jpu_buffer { + struct v4l2_m2m_buffer buf; + unsigned short compr_quality; + unsigned char subsampling; +}; + +/** + * struct jpu_fmt - driver's internal format data + * @fourcc: the fourcc code, 0 if not applicable + * @colorspace: the colorspace specifier + * @bpp: number of bits per pixel per plane + * @h_align: horizontal alignment order (align to 2^h_align) + * @v_align: vertical alignment order (align to 2^v_align) + * @subsampling: (horizontal:4 | vertical:4) subsampling factor + * @num_planes: number of planes + * @types: types of queue this format is applicable to + */ +struct jpu_fmt { + u32 fourcc; + u32 colorspace; + u8 bpp[2]; + u8 h_align; + u8 v_align; + u8 subsampling; + u8 num_planes; + u16 types; +}; + +/** + * struct jpu_q_data - parameters of one queue + * @fmtinfo: driver-specific format of this queue + * @format: multiplanar format of this queue + * @sequence: sequence number + */ +struct jpu_q_data { + struct jpu_fmt *fmtinfo; + struct v4l2_pix_format_mplane format; + unsigned int sequence; +}; + +/** + * struct jpu_ctx - the device context data + * @jpu: JPEG IP device for this context + * @encoder: compression (encode) operation or decompression (decode) + * @compr_quality: destination image quality in compression (encode) mode + * @out_q: source (output) queue information + * @cap_q: destination (capture) queue information + * @fh: file handler + * @ctrl_handler: controls handler + */ +struct jpu_ctx { + struct jpu *jpu; + bool encoder; + unsigned short compr_quality; + struct jpu_q_data out_q; + struct jpu_q_data cap_q; + struct v4l2_fh fh; + struct v4l2_ctrl_handler ctrl_handler; +}; + + /** + * jpeg_buffer - description of memory containing input JPEG data + * @end: end position in the buffer + * @curr: current position in the buffer + */ +struct jpeg_buffer { + void *end; + void *curr; +}; + +static struct jpu_fmt jpu_formats[] = { + { V4L2_PIX_FMT_JPEG, V4L2_COLORSPACE_JPEG, + {0, 0}, 0, 0, 0, 1, JPU_ENC_CAPTURE | JPU_DEC_OUTPUT }, + { V4L2_PIX_FMT_NV16M, V4L2_COLORSPACE_SRGB, + {8, 8}, 2, 2, JPU_JPEG_422, 2, JPU_ENC_OUTPUT | JPU_DEC_CAPTURE }, + { V4L2_PIX_FMT_NV12M, V4L2_COLORSPACE_SRGB, + {8, 4}, 2, 2, JPU_JPEG_420, 2, JPU_ENC_OUTPUT | JPU_DEC_CAPTURE }, + { V4L2_PIX_FMT_NV16, V4L2_COLORSPACE_SRGB, + {16, 0}, 2, 2, JPU_JPEG_422, 1, JPU_ENC_OUTPUT | JPU_DEC_CAPTURE }, + { V4L2_PIX_FMT_NV12, V4L2_COLORSPACE_SRGB, + {12, 0}, 2, 2, JPU_JPEG_420, 1, JPU_ENC_OUTPUT | JPU_DEC_CAPTURE }, +}; + +static const u8 zigzag[] = { + 0x03, 0x02, 0x0b, 0x13, 0x0a, 0x01, 0x00, 0x09, + 0x12, 0x1b, 0x23, 0x1a, 0x11, 0x08, 0x07, 0x06, + 0x0f, 0x10, 0x19, 0x22, 0x2b, 0x33, 0x2a, 0x21, + 0x18, 0x17, 0x0e, 0x05, 0x04, 0x0d, 0x16, 0x1f, + 0x20, 0x29, 0x32, 0x3b, 0x3a, 0x31, 0x28, 0x27, + 0x1e, 0x15, 0x0e, 0x14, 0x10, 0x26, 0x2f, 0x30, + 0x39, 0x38, 0x37, 0x2e, 0x25, 0x1c, 0x24, 0x2b, + 0x36, 0x3f, 0x3e, 0x35, 0x2c, 0x34, 0x3d, 0x3c +}; + +#define QTBL_SIZE (ALIGN(JPU_JPEG_QTBL_SIZE, \ + sizeof(unsigned int)) / sizeof(unsigned int)) +#define HDCTBL_SIZE (ALIGN(JPU_JPEG_HDCTBL_SIZE, \ + sizeof(unsigned int)) / sizeof(unsigned int)) +#define HACTBL_SIZE (ALIGN(JPU_JPEG_HACTBL_SIZE, \ + sizeof(unsigned int)) / sizeof(unsigned int)) +/* + * Start of image; Quantization tables + * SOF0 (17 bytes payload) is Baseline DCT - Sample precision, height, width, + * Number of image components, (Ci:8 - Hi:4 - Vi:4 - Tq:8) * 3 - Y,Cb,Cr; + * Huffman tables; Padding with 0xff (33.3.27 R01UH0501EJ0100 Rev.1.00) + */ +#define JPU_JPEG_HDR_BLOB { \ + 0xff, SOI, 0xff, DQT, 0x00, JPU_JPEG_QTBL_SIZE + 0x3, JPU_JPEG_LUM, \ + [JPU_JPEG_QTBL_LUM_OFFSET ... \ + JPU_JPEG_QTBL_LUM_OFFSET + JPU_JPEG_QTBL_SIZE - 1] = 0x00, \ + 0xff, DQT, 0x00, JPU_JPEG_QTBL_SIZE + 0x3, JPU_JPEG_CHR, \ + [JPU_JPEG_QTBL_CHR_OFFSET ... JPU_JPEG_QTBL_CHR_OFFSET + \ + JPU_JPEG_QTBL_SIZE - 1] = 0x00, 0xff, SOF0, 0x00, 0x11, 0x08, \ + [JPU_JPEG_HEIGHT_OFFSET ... JPU_JPEG_HEIGHT_OFFSET + 1] = 0x00, \ + [JPU_JPEG_WIDTH_OFFSET ... JPU_JPEG_WIDTH_OFFSET + 1] = 0x00, \ + 0x03, 0x01, [JPU_JPEG_SUBS_OFFSET] = 0x00, JPU_JPEG_LUM, \ + 0x02, 0x11, JPU_JPEG_CHR, 0x03, 0x11, JPU_JPEG_CHR, \ + 0xff, DHT, 0x00, JPU_JPEG_HDCTBL_SIZE + 0x3, JPU_JPEG_LUM|JPU_JPEG_DC, \ + [JPU_JPEG_HDCTBL_LUM_OFFSET ... \ + JPU_JPEG_HDCTBL_LUM_OFFSET + JPU_JPEG_HDCTBL_SIZE - 1] = 0x00, \ + 0xff, DHT, 0x00, JPU_JPEG_HACTBL_SIZE + 0x3, JPU_JPEG_LUM|JPU_JPEG_AC, \ + [JPU_JPEG_HACTBL_LUM_OFFSET ... \ + JPU_JPEG_HACTBL_LUM_OFFSET + JPU_JPEG_HACTBL_SIZE - 1] = 0x00, \ + 0xff, DHT, 0x00, JPU_JPEG_HDCTBL_SIZE + 0x3, JPU_JPEG_CHR|JPU_JPEG_DC, \ + [JPU_JPEG_HDCTBL_CHR_OFFSET ... \ + JPU_JPEG_HDCTBL_CHR_OFFSET + JPU_JPEG_HDCTBL_SIZE - 1] = 0x00, \ + 0xff, DHT, 0x00, JPU_JPEG_HACTBL_SIZE + 0x3, JPU_JPEG_CHR|JPU_JPEG_AC, \ + [JPU_JPEG_HACTBL_CHR_OFFSET ... \ + JPU_JPEG_HACTBL_CHR_OFFSET + JPU_JPEG_HACTBL_SIZE - 1] = 0x00, \ + [JPU_JPEG_PADDING_OFFSET ... JPU_JPEG_HDR_SIZE - 1] = 0xff \ +} + +static unsigned char jpeg_hdrs[JPU_MAX_QUALITY][JPU_JPEG_HDR_SIZE] = { + [0 ... JPU_MAX_QUALITY - 1] = JPU_JPEG_HDR_BLOB +}; + +static const unsigned int qtbl_lum[JPU_MAX_QUALITY][QTBL_SIZE] = { + { + 0x14101927, 0x322e3e44, 0x10121726, 0x26354144, + 0x19171f26, 0x35414444, 0x27262635, 0x41444444, + 0x32263541, 0x44444444, 0x2e354144, 0x44444444, + 0x3e414444, 0x44444444, 0x44444444, 0x44444444 + }, + { + 0x100b0b10, 0x171b1f1e, 0x0b0c0c0f, 0x1417171e, + 0x0b0c0d10, 0x171a232f, 0x100f1017, 0x1a252f40, + 0x1714171a, 0x27334040, 0x1b171a25, 0x33404040, + 0x1f17232f, 0x40404040, 0x1e1e2f40, 0x40404040 + }, + { + 0x0c08080c, 0x11151817, 0x0809090b, 0x0f131217, + 0x08090a0c, 0x13141b24, 0x0c0b0c15, 0x141c2435, + 0x110f1314, 0x1e27333b, 0x1513141c, 0x27333b3b, + 0x18121b24, 0x333b3b3b, 0x17172435, 0x3b3b3b3b + }, + { + 0x08060608, 0x0c0e1011, 0x06060608, 0x0a0d0c0f, + 0x06060708, 0x0d0e1218, 0x0808080e, 0x0d131823, + 0x0c0a0d0d, 0x141a2227, 0x0e0d0e13, 0x1a222727, + 0x100c1318, 0x22272727, 0x110f1823, 0x27272727 + } +}; + +static const unsigned int qtbl_chr[JPU_MAX_QUALITY][QTBL_SIZE] = { + { + 0x15192026, 0x36444444, 0x191c1826, 0x36444444, + 0x2018202b, 0x42444444, 0x26262b35, 0x44444444, + 0x36424444, 0x44444444, 0x44444444, 0x44444444, + 0x44444444, 0x44444444, 0x44444444, 0x44444444 + }, + { + 0x110f1115, 0x141a2630, 0x0f131211, 0x141a232b, + 0x11121416, 0x1a1e2e35, 0x1511161c, 0x1e273540, + 0x14141a1e, 0x27304040, 0x1a1a1e27, 0x303f4040, + 0x26232e35, 0x40404040, 0x302b3540, 0x40404040 + }, + { + 0x0d0b0d10, 0x14141d25, 0x0b0e0e0e, 0x10141a20, + 0x0d0e0f11, 0x14172328, 0x100e1115, 0x171e2832, + 0x14101417, 0x1e25323b, 0x1414171e, 0x25303b3b, + 0x1d1a2328, 0x323b3b3b, 0x25202832, 0x3b3b3b3b + }, + { + 0x0908090b, 0x0e111318, 0x080a090b, 0x0e0d1116, + 0x09090d0e, 0x0d0f171a, 0x0b0b0e0e, 0x0f141a21, + 0x0e0e0d0f, 0x14182127, 0x110d0f14, 0x18202727, + 0x1311171a, 0x21272727, 0x18161a21, 0x27272727 + } +}; + +static const unsigned int hdctbl_lum[HDCTBL_SIZE] = { + 0x00010501, 0x01010101, 0x01000000, 0x00000000, + 0x00010203, 0x04050607, 0x08090a0b +}; + +static const unsigned int hdctbl_chr[HDCTBL_SIZE] = { + 0x00010501, 0x01010101, 0x01000000, 0x00000000, + 0x00010203, 0x04050607, 0x08090a0b +}; + +static const unsigned int hactbl_lum[HACTBL_SIZE] = { + 0x00020103, 0x03020403, 0x05050404, 0x0000017d, 0x01020300, 0x04110512, + 0x21314106, 0x13516107, 0x22711432, 0x8191a108, 0x2342b1c1, 0x1552d1f0, + 0x24336272, 0x82090a16, 0x1718191a, 0x25262728, 0x292a3435, 0x36373839, + 0x3a434445, 0x46474849, 0x4a535455, 0x56575859, 0x5a636465, 0x66676869, + 0x6a737475, 0x76777879, 0x7a838485, 0x86878889, 0x8a929394, 0x95969798, + 0x999aa2a3, 0xa4a5a6a7, 0xa8a9aab2, 0xb3b4b5b6, 0xb7b8b9ba, 0xc2c3c4c5, + 0xc6c7c8c9, 0xcad2d3d4, 0xd5d6d7d8, 0xd9dae1e2, 0xe3e4e5e6, 0xe7e8e9ea, + 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fa0000 +}; + +static const unsigned int hactbl_chr[HACTBL_SIZE] = { + 0x00020103, 0x03020403, 0x05050404, 0x0000017d, 0x01020300, 0x04110512, + 0x21314106, 0x13516107, 0x22711432, 0x8191a108, 0x2342b1c1, 0x1552d1f0, + 0x24336272, 0x82090a16, 0x1718191a, 0x25262728, 0x292a3435, 0x36373839, + 0x3a434445, 0x46474849, 0x4a535455, 0x56575859, 0x5a636465, 0x66676869, + 0x6a737475, 0x76777879, 0x7a838485, 0x86878889, 0x8a929394, 0x95969798, + 0x999aa2a3, 0xa4a5a6a7, 0xa8a9aab2, 0xb3b4b5b6, 0xb7b8b9ba, 0xc2c3c4c5, + 0xc6c7c8c9, 0xcad2d3d4, 0xd5d6d7d8, 0xd9dae1e2, 0xe3e4e5e6, 0xe7e8e9ea, + 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fa0000 +}; + +static const char *error_to_text[16] = { + "Normal", + "SOI not detected", + "SOF1 to SOFF detected", + "Subsampling not detected", + "SOF accuracy error", + "DQT accuracy error", + "Component error 1", + "Component error 2", + "SOF0, DQT, and DHT not detected when SOS detected", + "SOS not detected", + "EOI not detected", + "Restart interval data number error detected", + "Image size error", + "Last MCU data number error", + "Block data number error", + "Unknown" +}; + +static struct jpu_buffer *vb2_to_jpu_buffer(struct vb2_v4l2_buffer *vb) +{ + struct v4l2_m2m_buffer *b = + container_of(vb, struct v4l2_m2m_buffer, vb); + + return container_of(b, struct jpu_buffer, buf); +} + +static u32 jpu_read(struct jpu *jpu, unsigned int reg) +{ + return ioread32(jpu->regs + reg); +} + +static void jpu_write(struct jpu *jpu, u32 val, unsigned int reg) +{ + iowrite32(val, jpu->regs + reg); +} + +static struct jpu_ctx *ctrl_to_ctx(struct v4l2_ctrl *c) +{ + return container_of(c->handler, struct jpu_ctx, ctrl_handler); +} + +static struct jpu_ctx *fh_to_ctx(struct v4l2_fh *fh) +{ + return container_of(fh, struct jpu_ctx, fh); +} + +static void jpu_set_tbl(struct jpu *jpu, u32 reg, const unsigned int *tbl, + unsigned int len) { + unsigned int i; + + for (i = 0; i < len; i++) + jpu_write(jpu, tbl[i], reg + (i << 2)); +} + +static void jpu_set_qtbl(struct jpu *jpu, unsigned short quality) +{ + jpu_set_tbl(jpu, JCQTBL(0), qtbl_lum[quality], QTBL_SIZE); + jpu_set_tbl(jpu, JCQTBL(1), qtbl_chr[quality], QTBL_SIZE); +} + +static void jpu_set_htbl(struct jpu *jpu) +{ + jpu_set_tbl(jpu, JCHTBD(0), hdctbl_lum, HDCTBL_SIZE); + jpu_set_tbl(jpu, JCHTBA(0), hactbl_lum, HACTBL_SIZE); + jpu_set_tbl(jpu, JCHTBD(1), hdctbl_chr, HDCTBL_SIZE); + jpu_set_tbl(jpu, JCHTBA(1), hactbl_chr, HACTBL_SIZE); +} + +static int jpu_wait_reset(struct jpu *jpu) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(JPU_RESET_TIMEOUT); + + while (jpu_read(jpu, JCCMD) & JCCMD_SRST) { + if (time_after(jiffies, timeout)) { + dev_err(jpu->dev, "timed out in reset\n"); + return -ETIMEDOUT; + } + schedule(); + } + + return 0; +} + +static int jpu_reset(struct jpu *jpu) +{ + jpu_write(jpu, JCCMD_SRST, JCCMD); + return jpu_wait_reset(jpu); +} + +/* + * ============================================================================ + * video ioctl operations + * ============================================================================ + */ +static void put_qtbl(u8 *p, const u8 *qtbl) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(zigzag); i++) + p[i] = *(qtbl + zigzag[i]); +} + +static void put_htbl(u8 *p, const u8 *htbl, unsigned int len) +{ + unsigned int i, j; + + for (i = 0; i < len; i += 4) + for (j = 0; j < 4 && (i + j) < len; ++j) + p[i + j] = htbl[i + 3 - j]; +} + +static void jpu_generate_hdr(unsigned short quality, unsigned char *p) +{ + put_qtbl(p + JPU_JPEG_QTBL_LUM_OFFSET, (const u8 *)qtbl_lum[quality]); + put_qtbl(p + JPU_JPEG_QTBL_CHR_OFFSET, (const u8 *)qtbl_chr[quality]); + + put_htbl(p + JPU_JPEG_HDCTBL_LUM_OFFSET, (const u8 *)hdctbl_lum, + JPU_JPEG_HDCTBL_SIZE); + put_htbl(p + JPU_JPEG_HACTBL_LUM_OFFSET, (const u8 *)hactbl_lum, + JPU_JPEG_HACTBL_SIZE); + + put_htbl(p + JPU_JPEG_HDCTBL_CHR_OFFSET, (const u8 *)hdctbl_chr, + JPU_JPEG_HDCTBL_SIZE); + put_htbl(p + JPU_JPEG_HACTBL_CHR_OFFSET, (const u8 *)hactbl_chr, + JPU_JPEG_HACTBL_SIZE); +} + +static int get_byte(struct jpeg_buffer *buf) +{ + if (buf->curr >= buf->end) + return -1; + + return *(u8 *)buf->curr++; +} + +static int get_word_be(struct jpeg_buffer *buf, unsigned int *word) +{ + if (buf->end - buf->curr < 2) + return -1; + + *word = get_unaligned_be16(buf->curr); + buf->curr += 2; + + return 0; +} + +static void skip(struct jpeg_buffer *buf, unsigned long len) +{ + buf->curr += min((unsigned long)(buf->end - buf->curr), len); +} + +static u8 jpu_parse_hdr(void *buffer, unsigned long size, unsigned int *width, + unsigned int *height) +{ + struct jpeg_buffer jpeg_buffer; + unsigned int word; + bool soi = false; + + jpeg_buffer.end = buffer + size; + jpeg_buffer.curr = buffer; + + /* + * basic size check and EOI - we don't want to let JPU cross + * buffer bounds in any case. Hope it's stopping by EOI. + */ + if (size < JPU_JPEG_MIN_SIZE || *(u8 *)(buffer + size - 1) != EOI) + return 0; + + for (;;) { + int c; + + /* skip preceding filler bytes */ + do + c = get_byte(&jpeg_buffer); + while (c == 0xff || c == 0); + + if (!soi && c == SOI) { + soi = true; + continue; + } else if (soi != (c != SOI)) + return 0; + + switch (c) { + case SOF0: /* SOF0: baseline JPEG */ + skip(&jpeg_buffer, 3); /* segment length and bpp */ + if (get_word_be(&jpeg_buffer, height) || + get_word_be(&jpeg_buffer, width) || + get_byte(&jpeg_buffer) != 3) /* YCbCr only */ + return 0; + + skip(&jpeg_buffer, 1); + return get_byte(&jpeg_buffer); + case DHT: + case DQT: + case COM: + case DRI: + case APP0 ... APP0 + 0x0f: + if (get_word_be(&jpeg_buffer, &word)) + return 0; + skip(&jpeg_buffer, (long)word - 2); + break; + case 0: + break; + default: + return 0; + } + } + + return 0; +} + +static int jpu_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct jpu_ctx *ctx = fh_to_ctx(priv); + + if (ctx->encoder) + strscpy(cap->card, DRV_NAME " encoder", sizeof(cap->card)); + else + strscpy(cap->card, DRV_NAME " decoder", sizeof(cap->card)); + + strscpy(cap->driver, DRV_NAME, sizeof(cap->driver)); + memset(cap->reserved, 0, sizeof(cap->reserved)); + + return 0; +} + +static struct jpu_fmt *jpu_find_format(bool encoder, u32 pixelformat, + unsigned int fmt_type) +{ + unsigned int i, fmt_flag; + + if (encoder) + fmt_flag = fmt_type == JPU_FMT_TYPE_OUTPUT ? JPU_ENC_OUTPUT : + JPU_ENC_CAPTURE; + else + fmt_flag = fmt_type == JPU_FMT_TYPE_OUTPUT ? JPU_DEC_OUTPUT : + JPU_DEC_CAPTURE; + + for (i = 0; i < ARRAY_SIZE(jpu_formats); i++) { + struct jpu_fmt *fmt = &jpu_formats[i]; + + if (fmt->fourcc == pixelformat && fmt->types & fmt_flag) + return fmt; + } + + return NULL; +} + +static int jpu_enum_fmt(struct v4l2_fmtdesc *f, u32 type) +{ + unsigned int i, num = 0; + + for (i = 0; i < ARRAY_SIZE(jpu_formats); ++i) { + if (jpu_formats[i].types & type) { + if (num == f->index) + break; + ++num; + } + } + + if (i >= ARRAY_SIZE(jpu_formats)) + return -EINVAL; + + f->pixelformat = jpu_formats[i].fourcc; + + return 0; +} + +static int jpu_enum_fmt_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct jpu_ctx *ctx = fh_to_ctx(priv); + + return jpu_enum_fmt(f, ctx->encoder ? JPU_ENC_CAPTURE : + JPU_DEC_CAPTURE); +} + +static int jpu_enum_fmt_out(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct jpu_ctx *ctx = fh_to_ctx(priv); + + return jpu_enum_fmt(f, ctx->encoder ? JPU_ENC_OUTPUT : JPU_DEC_OUTPUT); +} + +static struct jpu_q_data *jpu_get_q_data(struct jpu_ctx *ctx, + enum v4l2_buf_type type) +{ + if (V4L2_TYPE_IS_OUTPUT(type)) + return &ctx->out_q; + else + return &ctx->cap_q; +} + +static void jpu_bound_align_image(u32 *w, unsigned int w_min, + unsigned int w_max, unsigned int w_align, + u32 *h, unsigned int h_min, + unsigned int h_max, unsigned int h_align) +{ + unsigned int width, height, w_step, h_step; + + width = *w; + height = *h; + + w_step = 1U << w_align; + h_step = 1U << h_align; + v4l_bound_align_image(w, w_min, w_max, w_align, h, h_min, h_max, + h_align, 3); + + if (*w < width && *w + w_step < w_max) + *w += w_step; + if (*h < height && *h + h_step < h_max) + *h += h_step; +} + +static int __jpu_try_fmt(struct jpu_ctx *ctx, struct jpu_fmt **fmtinfo, + struct v4l2_pix_format_mplane *pix, + enum v4l2_buf_type type) +{ + struct jpu_fmt *fmt; + unsigned int f_type, w, h; + + f_type = V4L2_TYPE_IS_OUTPUT(type) ? JPU_FMT_TYPE_OUTPUT : + JPU_FMT_TYPE_CAPTURE; + + fmt = jpu_find_format(ctx->encoder, pix->pixelformat, f_type); + if (!fmt) { + unsigned int pixelformat; + + dev_dbg(ctx->jpu->dev, "unknown format; set default format\n"); + if (ctx->encoder) + pixelformat = f_type == JPU_FMT_TYPE_OUTPUT ? + V4L2_PIX_FMT_NV16M : V4L2_PIX_FMT_JPEG; + else + pixelformat = f_type == JPU_FMT_TYPE_CAPTURE ? + V4L2_PIX_FMT_NV16M : V4L2_PIX_FMT_JPEG; + fmt = jpu_find_format(ctx->encoder, pixelformat, f_type); + } + + pix->pixelformat = fmt->fourcc; + pix->colorspace = fmt->colorspace; + pix->field = V4L2_FIELD_NONE; + pix->num_planes = fmt->num_planes; + + jpu_bound_align_image(&pix->width, JPU_WIDTH_MIN, JPU_WIDTH_MAX, + fmt->h_align, &pix->height, JPU_HEIGHT_MIN, + JPU_HEIGHT_MAX, fmt->v_align); + + w = pix->width; + h = pix->height; + + if (fmt->fourcc == V4L2_PIX_FMT_JPEG) { + /* ignore userspaces's sizeimage for encoding */ + if (pix->plane_fmt[0].sizeimage <= 0 || ctx->encoder) + pix->plane_fmt[0].sizeimage = JPU_JPEG_HDR_SIZE + + (JPU_JPEG_MAX_BYTES_PER_PIXEL * w * h); + pix->plane_fmt[0].bytesperline = 0; + } else { + unsigned int i, bpl = 0; + + for (i = 0; i < pix->num_planes; ++i) + bpl = max(bpl, pix->plane_fmt[i].bytesperline); + + bpl = clamp_t(unsigned int, bpl, w, JPU_WIDTH_MAX); + bpl = round_up(bpl, JPU_MEMALIGN); + + for (i = 0; i < pix->num_planes; ++i) { + pix->plane_fmt[i].bytesperline = bpl; + pix->plane_fmt[i].sizeimage = bpl * h * fmt->bpp[i] / 8; + } + } + + if (fmtinfo) + *fmtinfo = fmt; + + return 0; +} + +static int jpu_try_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct jpu_ctx *ctx = fh_to_ctx(priv); + + if (!v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type)) + return -EINVAL; + + return __jpu_try_fmt(ctx, NULL, &f->fmt.pix_mp, f->type); +} + +static int jpu_s_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct vb2_queue *vq; + struct jpu_ctx *ctx = fh_to_ctx(priv); + struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx; + struct jpu_fmt *fmtinfo; + struct jpu_q_data *q_data; + int ret; + + vq = v4l2_m2m_get_vq(m2m_ctx, f->type); + if (!vq) + return -EINVAL; + + if (vb2_is_busy(vq)) { + v4l2_err(&ctx->jpu->v4l2_dev, "%s queue busy\n", __func__); + return -EBUSY; + } + + ret = __jpu_try_fmt(ctx, &fmtinfo, &f->fmt.pix_mp, f->type); + if (ret < 0) + return ret; + + q_data = jpu_get_q_data(ctx, f->type); + + q_data->format = f->fmt.pix_mp; + q_data->fmtinfo = fmtinfo; + + return 0; +} + +static int jpu_g_fmt(struct file *file, void *priv, struct v4l2_format *f) +{ + struct jpu_q_data *q_data; + struct jpu_ctx *ctx = fh_to_ctx(priv); + + if (!v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type)) + return -EINVAL; + + q_data = jpu_get_q_data(ctx, f->type); + f->fmt.pix_mp = q_data->format; + + return 0; +} + +/* + * V4L2 controls + */ +static int jpu_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct jpu_ctx *ctx = ctrl_to_ctx(ctrl); + unsigned long flags; + + spin_lock_irqsave(&ctx->jpu->lock, flags); + if (ctrl->id == V4L2_CID_JPEG_COMPRESSION_QUALITY) + ctx->compr_quality = ctrl->val; + spin_unlock_irqrestore(&ctx->jpu->lock, flags); + + return 0; +} + +static const struct v4l2_ctrl_ops jpu_ctrl_ops = { + .s_ctrl = jpu_s_ctrl, +}; + +static int jpu_streamon(struct file *file, void *priv, enum v4l2_buf_type type) +{ + struct jpu_ctx *ctx = fh_to_ctx(priv); + struct jpu_q_data *src_q_data, *dst_q_data, *orig, adj, *ref; + enum v4l2_buf_type adj_type; + + src_q_data = jpu_get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + dst_q_data = jpu_get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); + + if (ctx->encoder) { + adj = *src_q_data; + orig = src_q_data; + ref = dst_q_data; + adj_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + } else { + adj = *dst_q_data; + orig = dst_q_data; + ref = src_q_data; + adj_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + } + + adj.format.width = ref->format.width; + adj.format.height = ref->format.height; + + __jpu_try_fmt(ctx, NULL, &adj.format, adj_type); + + if (adj.format.width != orig->format.width || + adj.format.height != orig->format.height) { + dev_err(ctx->jpu->dev, "src and dst formats do not match.\n"); + /* maybe we can return -EPIPE here? */ + return -EINVAL; + } + + return v4l2_m2m_streamon(file, ctx->fh.m2m_ctx, type); +} + +static const struct v4l2_ioctl_ops jpu_ioctl_ops = { + .vidioc_querycap = jpu_querycap, + + .vidioc_enum_fmt_vid_cap = jpu_enum_fmt_cap, + .vidioc_enum_fmt_vid_out = jpu_enum_fmt_out, + .vidioc_g_fmt_vid_cap_mplane = jpu_g_fmt, + .vidioc_g_fmt_vid_out_mplane = jpu_g_fmt, + .vidioc_try_fmt_vid_cap_mplane = jpu_try_fmt, + .vidioc_try_fmt_vid_out_mplane = jpu_try_fmt, + .vidioc_s_fmt_vid_cap_mplane = jpu_s_fmt, + .vidioc_s_fmt_vid_out_mplane = jpu_s_fmt, + + .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs, + .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs, + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, + .vidioc_qbuf = v4l2_m2m_ioctl_qbuf, + .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf, + .vidioc_expbuf = v4l2_m2m_ioctl_expbuf, + + .vidioc_streamon = jpu_streamon, + .vidioc_streamoff = v4l2_m2m_ioctl_streamoff, + + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe +}; + +static int jpu_controls_create(struct jpu_ctx *ctx) +{ + struct v4l2_ctrl *ctrl; + int ret; + + v4l2_ctrl_handler_init(&ctx->ctrl_handler, 1); + + ctrl = v4l2_ctrl_new_std(&ctx->ctrl_handler, &jpu_ctrl_ops, + V4L2_CID_JPEG_COMPRESSION_QUALITY, + 0, JPU_MAX_QUALITY - 1, 1, 0); + + if (ctx->ctrl_handler.error) { + ret = ctx->ctrl_handler.error; + goto error_free; + } + + if (!ctx->encoder) + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE | + V4L2_CTRL_FLAG_READ_ONLY; + + ret = v4l2_ctrl_handler_setup(&ctx->ctrl_handler); + if (ret < 0) + goto error_free; + + return 0; + +error_free: + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + return ret; +} + +/* + * ============================================================================ + * Queue operations + * ============================================================================ + */ +static int jpu_queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], struct device *alloc_devs[]) +{ + struct jpu_ctx *ctx = vb2_get_drv_priv(vq); + struct jpu_q_data *q_data; + unsigned int i; + + q_data = jpu_get_q_data(ctx, vq->type); + + if (*nplanes) { + if (*nplanes != q_data->format.num_planes) + return -EINVAL; + + for (i = 0; i < *nplanes; i++) { + unsigned int q_size = q_data->format.plane_fmt[i].sizeimage; + + if (sizes[i] < q_size) + return -EINVAL; + } + return 0; + } + + *nplanes = q_data->format.num_planes; + + for (i = 0; i < *nplanes; i++) + sizes[i] = q_data->format.plane_fmt[i].sizeimage; + + return 0; +} + +static int jpu_buf_prepare(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct jpu_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct jpu_q_data *q_data; + unsigned int i; + + q_data = jpu_get_q_data(ctx, vb->vb2_queue->type); + + if (V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) { + if (vbuf->field == V4L2_FIELD_ANY) + vbuf->field = V4L2_FIELD_NONE; + if (vbuf->field != V4L2_FIELD_NONE) { + dev_err(ctx->jpu->dev, "%s field isn't supported\n", + __func__); + return -EINVAL; + } + } + + for (i = 0; i < q_data->format.num_planes; i++) { + unsigned long size = q_data->format.plane_fmt[i].sizeimage; + + if (vb2_plane_size(vb, i) < size) { + dev_err(ctx->jpu->dev, + "%s: data will not fit into plane (%lu < %lu)\n", + __func__, vb2_plane_size(vb, i), size); + return -EINVAL; + } + + /* decoder capture queue */ + if (!ctx->encoder && V4L2_TYPE_IS_CAPTURE(vb->vb2_queue->type)) + vb2_set_plane_payload(vb, i, size); + } + + return 0; +} + +static void jpu_buf_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct jpu_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + + if (!ctx->encoder && V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) { + struct jpu_buffer *jpu_buf = vb2_to_jpu_buffer(vbuf); + struct jpu_q_data *q_data, adjust; + void *buffer = vb2_plane_vaddr(vb, 0); + unsigned long buf_size = vb2_get_plane_payload(vb, 0); + unsigned int width, height; + + u8 subsampling = jpu_parse_hdr(buffer, buf_size, &width, + &height); + + /* check if JPEG data basic parsing was successful */ + if (subsampling != JPU_JPEG_422 && subsampling != JPU_JPEG_420) + goto format_error; + + q_data = &ctx->out_q; + + adjust = *q_data; + adjust.format.width = width; + adjust.format.height = height; + + __jpu_try_fmt(ctx, &adjust.fmtinfo, &adjust.format, + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + + if (adjust.format.width != q_data->format.width || + adjust.format.height != q_data->format.height) + goto format_error; + + /* + * keep subsampling in buffer to check it + * for compatibility in device_run + */ + jpu_buf->subsampling = subsampling; + } + + if (ctx->fh.m2m_ctx) + v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf); + + return; + +format_error: + dev_err(ctx->jpu->dev, "incompatible or corrupted JPEG data\n"); + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); +} + +static void jpu_buf_finish(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct jpu_buffer *jpu_buf = vb2_to_jpu_buffer(vbuf); + struct jpu_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct jpu_q_data *q_data = &ctx->out_q; + enum v4l2_buf_type type = vb->vb2_queue->type; + u8 *buffer; + + if (vb->state == VB2_BUF_STATE_DONE) + vbuf->sequence = jpu_get_q_data(ctx, type)->sequence++; + + if (!ctx->encoder || vb->state != VB2_BUF_STATE_DONE || + V4L2_TYPE_IS_OUTPUT(type)) + return; + + buffer = vb2_plane_vaddr(vb, 0); + + memcpy(buffer, jpeg_hdrs[jpu_buf->compr_quality], JPU_JPEG_HDR_SIZE); + *(__be16 *)(buffer + JPU_JPEG_HEIGHT_OFFSET) = + cpu_to_be16(q_data->format.height); + *(__be16 *)(buffer + JPU_JPEG_WIDTH_OFFSET) = + cpu_to_be16(q_data->format.width); + *(buffer + JPU_JPEG_SUBS_OFFSET) = q_data->fmtinfo->subsampling; +} + +static int jpu_start_streaming(struct vb2_queue *vq, unsigned count) +{ + struct jpu_ctx *ctx = vb2_get_drv_priv(vq); + struct jpu_q_data *q_data = jpu_get_q_data(ctx, vq->type); + + q_data->sequence = 0; + return 0; +} + +static void jpu_stop_streaming(struct vb2_queue *vq) +{ + struct jpu_ctx *ctx = vb2_get_drv_priv(vq); + struct vb2_v4l2_buffer *vb; + unsigned long flags; + + for (;;) { + if (V4L2_TYPE_IS_OUTPUT(vq->type)) + vb = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); + else + vb = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); + if (vb == NULL) + return; + spin_lock_irqsave(&ctx->jpu->lock, flags); + v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR); + spin_unlock_irqrestore(&ctx->jpu->lock, flags); + } +} + +static const struct vb2_ops jpu_qops = { + .queue_setup = jpu_queue_setup, + .buf_prepare = jpu_buf_prepare, + .buf_queue = jpu_buf_queue, + .buf_finish = jpu_buf_finish, + .start_streaming = jpu_start_streaming, + .stop_streaming = jpu_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +static int jpu_queue_init(void *priv, struct vb2_queue *src_vq, + struct vb2_queue *dst_vq) +{ + struct jpu_ctx *ctx = priv; + int ret; + + memset(src_vq, 0, sizeof(*src_vq)); + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + src_vq->io_modes = VB2_MMAP | VB2_DMABUF; + src_vq->drv_priv = ctx; + src_vq->buf_struct_size = sizeof(struct jpu_buffer); + src_vq->ops = &jpu_qops; + src_vq->mem_ops = &vb2_dma_contig_memops; + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + src_vq->lock = &ctx->jpu->mutex; + src_vq->dev = ctx->jpu->v4l2_dev.dev; + + ret = vb2_queue_init(src_vq); + if (ret) + return ret; + + memset(dst_vq, 0, sizeof(*dst_vq)); + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + dst_vq->io_modes = VB2_MMAP | VB2_DMABUF; + dst_vq->drv_priv = ctx; + dst_vq->buf_struct_size = sizeof(struct jpu_buffer); + dst_vq->ops = &jpu_qops; + dst_vq->mem_ops = &vb2_dma_contig_memops; + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + dst_vq->lock = &ctx->jpu->mutex; + dst_vq->dev = ctx->jpu->v4l2_dev.dev; + + return vb2_queue_init(dst_vq); +} + +/* + * ============================================================================ + * Device file operations + * ============================================================================ + */ +static int jpu_open(struct file *file) +{ + struct jpu *jpu = video_drvdata(file); + struct video_device *vfd = video_devdata(file); + struct jpu_ctx *ctx; + int ret; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + v4l2_fh_init(&ctx->fh, vfd); + ctx->fh.ctrl_handler = &ctx->ctrl_handler; + file->private_data = &ctx->fh; + v4l2_fh_add(&ctx->fh); + + ctx->jpu = jpu; + ctx->encoder = vfd == &jpu->vfd_encoder; + + __jpu_try_fmt(ctx, &ctx->out_q.fmtinfo, &ctx->out_q.format, + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + __jpu_try_fmt(ctx, &ctx->cap_q.fmtinfo, &ctx->cap_q.format, + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); + + ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(jpu->m2m_dev, ctx, jpu_queue_init); + if (IS_ERR(ctx->fh.m2m_ctx)) { + ret = PTR_ERR(ctx->fh.m2m_ctx); + goto v4l_prepare_rollback; + } + + ret = jpu_controls_create(ctx); + if (ret < 0) + goto v4l_prepare_rollback; + + if (mutex_lock_interruptible(&jpu->mutex)) { + ret = -ERESTARTSYS; + goto v4l_prepare_rollback; + } + + if (jpu->ref_count == 0) { + ret = clk_prepare_enable(jpu->clk); + if (ret < 0) + goto device_prepare_rollback; + /* ...issue software reset */ + ret = jpu_reset(jpu); + if (ret) + goto jpu_reset_rollback; + } + + jpu->ref_count++; + + mutex_unlock(&jpu->mutex); + return 0; + +jpu_reset_rollback: + clk_disable_unprepare(jpu->clk); +device_prepare_rollback: + mutex_unlock(&jpu->mutex); +v4l_prepare_rollback: + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); + return ret; +} + +static int jpu_release(struct file *file) +{ + struct jpu *jpu = video_drvdata(file); + struct jpu_ctx *ctx = fh_to_ctx(file->private_data); + + v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); + v4l2_ctrl_handler_free(&ctx->ctrl_handler); + v4l2_fh_del(&ctx->fh); + v4l2_fh_exit(&ctx->fh); + kfree(ctx); + + mutex_lock(&jpu->mutex); + if (--jpu->ref_count == 0) + clk_disable_unprepare(jpu->clk); + mutex_unlock(&jpu->mutex); + + return 0; +} + +static const struct v4l2_file_operations jpu_fops = { + .owner = THIS_MODULE, + .open = jpu_open, + .release = jpu_release, + .unlocked_ioctl = video_ioctl2, + .poll = v4l2_m2m_fop_poll, + .mmap = v4l2_m2m_fop_mmap, +}; + +/* + * ============================================================================ + * mem2mem callbacks + * ============================================================================ + */ +static void jpu_cleanup(struct jpu_ctx *ctx, bool reset) +{ + /* remove current buffers and finish job */ + struct vb2_v4l2_buffer *src_buf, *dst_buf; + unsigned long flags; + + spin_lock_irqsave(&ctx->jpu->lock, flags); + + src_buf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); + dst_buf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); + + v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR); + v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_ERROR); + + /* ...and give it a chance on next run */ + if (reset) + jpu_write(ctx->jpu, JCCMD_SRST, JCCMD); + + spin_unlock_irqrestore(&ctx->jpu->lock, flags); + + v4l2_m2m_job_finish(ctx->jpu->m2m_dev, ctx->fh.m2m_ctx); +} + +static void jpu_device_run(void *priv) +{ + struct jpu_ctx *ctx = priv; + struct jpu *jpu = ctx->jpu; + struct jpu_buffer *jpu_buf; + struct jpu_q_data *q_data; + struct vb2_v4l2_buffer *src_buf, *dst_buf; + unsigned int w, h, bpl; + unsigned char num_planes, subsampling; + unsigned long flags; + + /* ...wait until module reset completes; we have mutex locked here */ + if (jpu_wait_reset(jpu)) { + jpu_cleanup(ctx, true); + return; + } + + spin_lock_irqsave(&ctx->jpu->lock, flags); + + jpu->curr = ctx; + + src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); + dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx); + + if (ctx->encoder) { + jpu_buf = vb2_to_jpu_buffer(dst_buf); + q_data = &ctx->out_q; + } else { + jpu_buf = vb2_to_jpu_buffer(src_buf); + q_data = &ctx->cap_q; + } + + w = q_data->format.width; + h = q_data->format.height; + bpl = q_data->format.plane_fmt[0].bytesperline; + num_planes = q_data->fmtinfo->num_planes; + subsampling = q_data->fmtinfo->subsampling; + + if (ctx->encoder) { + unsigned long src_1_addr, src_2_addr, dst_addr; + unsigned int redu, inft; + + dst_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0); + src_1_addr = + vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0); + if (num_planes > 1) + src_2_addr = vb2_dma_contig_plane_dma_addr( + &src_buf->vb2_buf, 1); + else + src_2_addr = src_1_addr + w * h; + + jpu_buf->compr_quality = ctx->compr_quality; + + if (subsampling == JPU_JPEG_420) { + redu = JCMOD_REDU_420; + inft = JIFECNT_INFT_420; + } else { + redu = JCMOD_REDU_422; + inft = JIFECNT_INFT_422; + } + + /* only no marker mode works for encoding */ + jpu_write(jpu, JCMOD_DSP_ENC | JCMOD_PCTR | redu | + JCMOD_MSKIP_ENABLE, JCMOD); + + jpu_write(jpu, JIFECNT_SWAP_WB | inft, JIFECNT); + jpu_write(jpu, JIFDCNT_SWAP_WB, JIFDCNT); + jpu_write(jpu, JINTE_TRANSF_COMPL, JINTE); + + /* Y and C components source addresses */ + jpu_write(jpu, src_1_addr, JIFESYA1); + jpu_write(jpu, src_2_addr, JIFESCA1); + + /* memory width */ + jpu_write(jpu, bpl, JIFESMW); + + jpu_write(jpu, (w >> 8) & JCSZ_MASK, JCHSZU); + jpu_write(jpu, w & JCSZ_MASK, JCHSZD); + + jpu_write(jpu, (h >> 8) & JCSZ_MASK, JCVSZU); + jpu_write(jpu, h & JCSZ_MASK, JCVSZD); + + jpu_write(jpu, w, JIFESHSZ); + jpu_write(jpu, h, JIFESVSZ); + + jpu_write(jpu, dst_addr + JPU_JPEG_HDR_SIZE, JIFEDA1); + + jpu_write(jpu, 0 << JCQTN_SHIFT(1) | 1 << JCQTN_SHIFT(2) | + 1 << JCQTN_SHIFT(3), JCQTN); + + jpu_write(jpu, 0 << JCHTN_AC_SHIFT(1) | 0 << JCHTN_DC_SHIFT(1) | + 1 << JCHTN_AC_SHIFT(2) | 1 << JCHTN_DC_SHIFT(2) | + 1 << JCHTN_AC_SHIFT(3) | 1 << JCHTN_DC_SHIFT(3), + JCHTN); + + jpu_set_qtbl(jpu, ctx->compr_quality); + jpu_set_htbl(jpu); + } else { + unsigned long src_addr, dst_1_addr, dst_2_addr; + + if (jpu_buf->subsampling != subsampling) { + dev_err(ctx->jpu->dev, + "src and dst formats do not match.\n"); + spin_unlock_irqrestore(&ctx->jpu->lock, flags); + jpu_cleanup(ctx, false); + return; + } + + src_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0); + dst_1_addr = + vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0); + if (q_data->fmtinfo->num_planes > 1) + dst_2_addr = vb2_dma_contig_plane_dma_addr( + &dst_buf->vb2_buf, 1); + else + dst_2_addr = dst_1_addr + w * h; + + /* ...set up decoder operation */ + jpu_write(jpu, JCMOD_DSP_DEC | JCMOD_PCTR, JCMOD); + jpu_write(jpu, JIFECNT_SWAP_WB, JIFECNT); + jpu_write(jpu, JIFDCNT_SWAP_WB, JIFDCNT); + + /* ...enable interrupts on transfer completion and d-g error */ + jpu_write(jpu, JINTE_TRANSF_COMPL | JINTE_ERR, JINTE); + + /* ...set source/destination addresses of encoded data */ + jpu_write(jpu, src_addr, JIFDSA1); + jpu_write(jpu, dst_1_addr, JIFDDYA1); + jpu_write(jpu, dst_2_addr, JIFDDCA1); + + jpu_write(jpu, bpl, JIFDDMW); + } + + /* ...start encoder/decoder operation */ + jpu_write(jpu, JCCMD_JSRT, JCCMD); + + spin_unlock_irqrestore(&ctx->jpu->lock, flags); +} + +static const struct v4l2_m2m_ops jpu_m2m_ops = { + .device_run = jpu_device_run, +}; + +/* + * ============================================================================ + * IRQ handler + * ============================================================================ + */ +static irqreturn_t jpu_irq_handler(int irq, void *dev_id) +{ + struct jpu *jpu = dev_id; + struct jpu_ctx *curr_ctx; + struct vb2_v4l2_buffer *src_buf, *dst_buf; + unsigned int int_status; + + int_status = jpu_read(jpu, JINTS); + + /* ...spurious interrupt */ + if (!((JINTS_TRANSF_COMPL | JINTS_PROCESS_COMPL | JINTS_ERR) & + int_status)) + return IRQ_NONE; + + /* ...clear interrupts */ + jpu_write(jpu, ~(int_status & JINTS_MASK), JINTS); + if (int_status & (JINTS_ERR | JINTS_PROCESS_COMPL)) + jpu_write(jpu, JCCMD_JEND, JCCMD); + + spin_lock(&jpu->lock); + + if ((int_status & JINTS_PROCESS_COMPL) && + !(int_status & JINTS_TRANSF_COMPL)) + goto handled; + + curr_ctx = v4l2_m2m_get_curr_priv(jpu->m2m_dev); + if (!curr_ctx) { + /* ...instance is not running */ + dev_err(jpu->dev, "no active context for m2m\n"); + goto handled; + } + + src_buf = v4l2_m2m_src_buf_remove(curr_ctx->fh.m2m_ctx); + dst_buf = v4l2_m2m_dst_buf_remove(curr_ctx->fh.m2m_ctx); + + if (int_status & JINTS_TRANSF_COMPL) { + if (curr_ctx->encoder) { + unsigned long payload_size = jpu_read(jpu, JCDTCU) << 16 + | jpu_read(jpu, JCDTCM) << 8 + | jpu_read(jpu, JCDTCD); + vb2_set_plane_payload(&dst_buf->vb2_buf, 0, + payload_size + JPU_JPEG_HDR_SIZE); + } + + dst_buf->field = src_buf->field; + dst_buf->vb2_buf.timestamp = src_buf->vb2_buf.timestamp; + if (src_buf->flags & V4L2_BUF_FLAG_TIMECODE) + dst_buf->timecode = src_buf->timecode; + dst_buf->flags = src_buf->flags & + (V4L2_BUF_FLAG_TIMECODE | V4L2_BUF_FLAG_KEYFRAME | + V4L2_BUF_FLAG_PFRAME | V4L2_BUF_FLAG_BFRAME | + V4L2_BUF_FLAG_TSTAMP_SRC_MASK); + + v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE); + v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE); + } else if (int_status & JINTS_ERR) { + unsigned char error = jpu_read(jpu, JCDERR) & JCDERR_MASK; + + dev_dbg(jpu->dev, "processing error: %#X: %s\n", error, + error_to_text[error]); + + v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR); + v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_ERROR); + } + + jpu->curr = NULL; + + /* ...reset JPU after completion */ + jpu_write(jpu, JCCMD_SRST, JCCMD); + spin_unlock(&jpu->lock); + + v4l2_m2m_job_finish(jpu->m2m_dev, curr_ctx->fh.m2m_ctx); + + return IRQ_HANDLED; + +handled: + spin_unlock(&jpu->lock); + return IRQ_HANDLED; +} + +/* + * ============================================================================ + * Driver basic infrastructure + * ============================================================================ + */ +static const struct of_device_id jpu_dt_ids[] = { + { .compatible = "renesas,jpu-r8a7790" }, /* H2 */ + { .compatible = "renesas,jpu-r8a7791" }, /* M2-W */ + { .compatible = "renesas,jpu-r8a7792" }, /* V2H */ + { .compatible = "renesas,jpu-r8a7793" }, /* M2-N */ + { .compatible = "renesas,rcar-gen2-jpu" }, + { }, +}; +MODULE_DEVICE_TABLE(of, jpu_dt_ids); + +static int jpu_probe(struct platform_device *pdev) +{ + struct jpu *jpu; + int ret; + unsigned int i; + + jpu = devm_kzalloc(&pdev->dev, sizeof(*jpu), GFP_KERNEL); + if (!jpu) + return -ENOMEM; + + mutex_init(&jpu->mutex); + spin_lock_init(&jpu->lock); + jpu->dev = &pdev->dev; + + /* memory-mapped registers */ + jpu->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(jpu->regs)) + return PTR_ERR(jpu->regs); + + /* interrupt service routine registration */ + jpu->irq = ret = platform_get_irq(pdev, 0); + if (ret < 0) { + dev_err(&pdev->dev, "cannot find IRQ\n"); + return ret; + } + + ret = devm_request_irq(&pdev->dev, jpu->irq, jpu_irq_handler, 0, + dev_name(&pdev->dev), jpu); + if (ret) { + dev_err(&pdev->dev, "cannot claim IRQ %d\n", jpu->irq); + return ret; + } + + /* clocks */ + jpu->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(jpu->clk)) { + dev_err(&pdev->dev, "cannot get clock\n"); + return PTR_ERR(jpu->clk); + } + + /* v4l2 device */ + ret = v4l2_device_register(&pdev->dev, &jpu->v4l2_dev); + if (ret) { + dev_err(&pdev->dev, "Failed to register v4l2 device\n"); + return ret; + } + + /* mem2mem device */ + jpu->m2m_dev = v4l2_m2m_init(&jpu_m2m_ops); + if (IS_ERR(jpu->m2m_dev)) { + v4l2_err(&jpu->v4l2_dev, "Failed to init mem2mem device\n"); + ret = PTR_ERR(jpu->m2m_dev); + goto device_register_rollback; + } + + /* fill in quantization and Huffman tables for encoder */ + for (i = 0; i < JPU_MAX_QUALITY; i++) + jpu_generate_hdr(i, (unsigned char *)jpeg_hdrs[i]); + + strscpy(jpu->vfd_encoder.name, DRV_NAME, sizeof(jpu->vfd_encoder.name)); + jpu->vfd_encoder.fops = &jpu_fops; + jpu->vfd_encoder.ioctl_ops = &jpu_ioctl_ops; + jpu->vfd_encoder.minor = -1; + jpu->vfd_encoder.release = video_device_release_empty; + jpu->vfd_encoder.lock = &jpu->mutex; + jpu->vfd_encoder.v4l2_dev = &jpu->v4l2_dev; + jpu->vfd_encoder.vfl_dir = VFL_DIR_M2M; + jpu->vfd_encoder.device_caps = V4L2_CAP_STREAMING | + V4L2_CAP_VIDEO_M2M_MPLANE; + + ret = video_register_device(&jpu->vfd_encoder, VFL_TYPE_VIDEO, -1); + if (ret) { + v4l2_err(&jpu->v4l2_dev, "Failed to register video device\n"); + goto m2m_init_rollback; + } + + video_set_drvdata(&jpu->vfd_encoder, jpu); + + strscpy(jpu->vfd_decoder.name, DRV_NAME, sizeof(jpu->vfd_decoder.name)); + jpu->vfd_decoder.fops = &jpu_fops; + jpu->vfd_decoder.ioctl_ops = &jpu_ioctl_ops; + jpu->vfd_decoder.minor = -1; + jpu->vfd_decoder.release = video_device_release_empty; + jpu->vfd_decoder.lock = &jpu->mutex; + jpu->vfd_decoder.v4l2_dev = &jpu->v4l2_dev; + jpu->vfd_decoder.vfl_dir = VFL_DIR_M2M; + jpu->vfd_decoder.device_caps = V4L2_CAP_STREAMING | + V4L2_CAP_VIDEO_M2M_MPLANE; + + ret = video_register_device(&jpu->vfd_decoder, VFL_TYPE_VIDEO, -1); + if (ret) { + v4l2_err(&jpu->v4l2_dev, "Failed to register video device\n"); + goto enc_vdev_register_rollback; + } + + video_set_drvdata(&jpu->vfd_decoder, jpu); + platform_set_drvdata(pdev, jpu); + + v4l2_info(&jpu->v4l2_dev, "encoder device registered as /dev/video%d\n", + jpu->vfd_encoder.num); + v4l2_info(&jpu->v4l2_dev, "decoder device registered as /dev/video%d\n", + jpu->vfd_decoder.num); + + return 0; + +enc_vdev_register_rollback: + video_unregister_device(&jpu->vfd_encoder); + +m2m_init_rollback: + v4l2_m2m_release(jpu->m2m_dev); + +device_register_rollback: + v4l2_device_unregister(&jpu->v4l2_dev); + + return ret; +} + +static int jpu_remove(struct platform_device *pdev) +{ + struct jpu *jpu = platform_get_drvdata(pdev); + + video_unregister_device(&jpu->vfd_decoder); + video_unregister_device(&jpu->vfd_encoder); + v4l2_m2m_release(jpu->m2m_dev); + v4l2_device_unregister(&jpu->v4l2_dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int jpu_suspend(struct device *dev) +{ + struct jpu *jpu = dev_get_drvdata(dev); + + if (jpu->ref_count == 0) + return 0; + + clk_disable_unprepare(jpu->clk); + + return 0; +} + +static int jpu_resume(struct device *dev) +{ + struct jpu *jpu = dev_get_drvdata(dev); + + if (jpu->ref_count == 0) + return 0; + + clk_prepare_enable(jpu->clk); + + return 0; +} +#endif + +static const struct dev_pm_ops jpu_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(jpu_suspend, jpu_resume) +}; + +static struct platform_driver jpu_driver = { + .probe = jpu_probe, + .remove = jpu_remove, + .driver = { + .of_match_table = jpu_dt_ids, + .name = DRV_NAME, + .pm = &jpu_pm_ops, + }, +}; + +module_platform_driver(jpu_driver); + +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_AUTHOR("Mikhail Ulianov <mikhail.ulyanov@cogentembedded.com>"); +MODULE_DESCRIPTION("Renesas R-Car JPEG processing unit driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/platform/renesas/renesas-ceu.c b/drivers/media/platform/renesas/renesas-ceu.c new file mode 100644 index 000000000..f70f91b00 --- /dev/null +++ b/drivers/media/platform/renesas/renesas-ceu.c @@ -0,0 +1,1749 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * V4L2 Driver for Renesas Capture Engine Unit (CEU) interface + * Copyright (C) 2017-2018 Jacopo Mondi <jacopo+renesas@jmondi.org> + * + * Based on soc-camera driver "soc_camera/sh_mobile_ceu_camera.c" + * Copyright (C) 2008 Magnus Damm + * + * Based on V4L2 Driver for PXA camera host - "pxa_camera.c", + * Copyright (C) 2006, Sascha Hauer, Pengutronix + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <linux/videodev2.h> + +#include <media/v4l2-async.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-image-sizes.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-mediabus.h> +#include <media/videobuf2-dma-contig.h> + +#include <media/drv-intf/renesas-ceu.h> + +#define DRIVER_NAME "renesas-ceu" + +/* CEU registers offsets and masks. */ +#define CEU_CAPSR 0x00 /* Capture start register */ +#define CEU_CAPCR 0x04 /* Capture control register */ +#define CEU_CAMCR 0x08 /* Capture interface control register */ +#define CEU_CAMOR 0x10 /* Capture interface offset register */ +#define CEU_CAPWR 0x14 /* Capture interface width register */ +#define CEU_CAIFR 0x18 /* Capture interface input format register */ +#define CEU_CRCNTR 0x28 /* CEU register control register */ +#define CEU_CRCMPR 0x2c /* CEU register forcible control register */ +#define CEU_CFLCR 0x30 /* Capture filter control register */ +#define CEU_CFSZR 0x34 /* Capture filter size clip register */ +#define CEU_CDWDR 0x38 /* Capture destination width register */ +#define CEU_CDAYR 0x3c /* Capture data address Y register */ +#define CEU_CDACR 0x40 /* Capture data address C register */ +#define CEU_CFWCR 0x5c /* Firewall operation control register */ +#define CEU_CDOCR 0x64 /* Capture data output control register */ +#define CEU_CEIER 0x70 /* Capture event interrupt enable register */ +#define CEU_CETCR 0x74 /* Capture event flag clear register */ +#define CEU_CSTSR 0x7c /* Capture status register */ +#define CEU_CSRTR 0x80 /* Capture software reset register */ + +/* Data synchronous fetch mode. */ +#define CEU_CAMCR_JPEG BIT(4) + +/* Input components ordering: CEU_CAMCR.DTARY field. */ +#define CEU_CAMCR_DTARY_8_UYVY (0x00 << 8) +#define CEU_CAMCR_DTARY_8_VYUY (0x01 << 8) +#define CEU_CAMCR_DTARY_8_YUYV (0x02 << 8) +#define CEU_CAMCR_DTARY_8_YVYU (0x03 << 8) +/* TODO: input components ordering for 16 bits input. */ + +/* Bus transfer MTU. */ +#define CEU_CAPCR_BUS_WIDTH256 (0x3 << 20) + +/* Bus width configuration. */ +#define CEU_CAMCR_DTIF_16BITS BIT(12) + +/* No downsampling to planar YUV420 in image fetch mode. */ +#define CEU_CDOCR_NO_DOWSAMPLE BIT(4) + +/* Swap all input data in 8-bit, 16-bits and 32-bits units (Figure 46.45). */ +#define CEU_CDOCR_SWAP_ENDIANNESS (7) + +/* Capture reset and enable bits. */ +#define CEU_CAPSR_CPKIL BIT(16) +#define CEU_CAPSR_CE BIT(0) + +/* CEU operating flag bit. */ +#define CEU_CAPCR_CTNCP BIT(16) +#define CEU_CSTRST_CPTON BIT(0) + +/* Platform specific IRQ source flags. */ +#define CEU_CETCR_ALL_IRQS_RZ 0x397f313 +#define CEU_CETCR_ALL_IRQS_SH4 0x3d7f313 + +/* Prohibited register access interrupt bit. */ +#define CEU_CETCR_IGRW BIT(4) +/* One-frame capture end interrupt. */ +#define CEU_CEIER_CPE BIT(0) +/* VBP error. */ +#define CEU_CEIER_VBP BIT(20) +#define CEU_CEIER_MASK (CEU_CEIER_CPE | CEU_CEIER_VBP) + +#define CEU_MAX_WIDTH 2560 +#define CEU_MAX_HEIGHT 1920 +#define CEU_MAX_BPL 8188 +#define CEU_W_MAX(w) ((w) < CEU_MAX_WIDTH ? (w) : CEU_MAX_WIDTH) +#define CEU_H_MAX(h) ((h) < CEU_MAX_HEIGHT ? (h) : CEU_MAX_HEIGHT) + +/* + * ceu_bus_fmt - describe a 8-bits yuyv format the sensor can produce + * + * @mbus_code: bus format code + * @fmt_order: CEU_CAMCR.DTARY ordering of input components (Y, Cb, Cr) + * @fmt_order_swap: swapped CEU_CAMCR.DTARY ordering of input components + * (Y, Cr, Cb) + * @swapped: does Cr appear before Cb? + * @bps: number of bits sent over bus for each sample + * @bpp: number of bits per pixels unit + */ +struct ceu_mbus_fmt { + u32 mbus_code; + u32 fmt_order; + u32 fmt_order_swap; + bool swapped; + u8 bps; + u8 bpp; +}; + +/* + * ceu_buffer - Link vb2 buffer to the list of available buffers. + */ +struct ceu_buffer { + struct vb2_v4l2_buffer vb; + struct list_head queue; +}; + +static inline struct ceu_buffer *vb2_to_ceu(struct vb2_v4l2_buffer *vbuf) +{ + return container_of(vbuf, struct ceu_buffer, vb); +} + +/* + * ceu_subdev - Wraps v4l2 sub-device and provides async subdevice. + */ +struct ceu_subdev { + struct v4l2_async_subdev asd; + struct v4l2_subdev *v4l2_sd; + + /* per-subdevice mbus configuration options */ + unsigned int mbus_flags; + struct ceu_mbus_fmt mbus_fmt; +}; + +static struct ceu_subdev *to_ceu_subdev(struct v4l2_async_subdev *asd) +{ + return container_of(asd, struct ceu_subdev, asd); +} + +/* + * ceu_device - CEU device instance + */ +struct ceu_device { + struct device *dev; + struct video_device vdev; + struct v4l2_device v4l2_dev; + + /* subdevices descriptors */ + struct ceu_subdev **subdevs; + /* the subdevice currently in use */ + struct ceu_subdev *sd; + unsigned int sd_index; + unsigned int num_sd; + + /* platform specific mask with all IRQ sources flagged */ + u32 irq_mask; + + /* currently configured field and pixel format */ + enum v4l2_field field; + struct v4l2_pix_format_mplane v4l2_pix; + + /* async subdev notification helpers */ + struct v4l2_async_notifier notifier; + + /* vb2 queue, capture buffer list and active buffer pointer */ + struct vb2_queue vb2_vq; + struct list_head capture; + struct vb2_v4l2_buffer *active; + unsigned int sequence; + + /* mlock - lock access to interface reset and vb2 queue */ + struct mutex mlock; + + /* lock - lock access to capture buffer queue and active buffer */ + spinlock_t lock; + + /* base - CEU memory base address */ + void __iomem *base; +}; + +static inline struct ceu_device *v4l2_to_ceu(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct ceu_device, v4l2_dev); +} + +/* --- CEU memory output formats --- */ + +/* + * ceu_fmt - describe a memory output format supported by CEU interface. + * + * @fourcc: memory layout fourcc format code + * @bpp: number of bits for each pixel stored in memory + */ +struct ceu_fmt { + u32 fourcc; + u32 bpp; +}; + +/* + * ceu_format_list - List of supported memory output formats + * + * If sensor provides any YUYV bus format, all the following planar memory + * formats are available thanks to CEU re-ordering and sub-sampling + * capabilities. + */ +static const struct ceu_fmt ceu_fmt_list[] = { + { + .fourcc = V4L2_PIX_FMT_NV16, + .bpp = 16, + }, + { + .fourcc = V4L2_PIX_FMT_NV61, + .bpp = 16, + }, + { + .fourcc = V4L2_PIX_FMT_NV12, + .bpp = 12, + }, + { + .fourcc = V4L2_PIX_FMT_NV21, + .bpp = 12, + }, + { + .fourcc = V4L2_PIX_FMT_YUYV, + .bpp = 16, + }, + { + .fourcc = V4L2_PIX_FMT_UYVY, + .bpp = 16, + }, + { + .fourcc = V4L2_PIX_FMT_YVYU, + .bpp = 16, + }, + { + .fourcc = V4L2_PIX_FMT_VYUY, + .bpp = 16, + }, +}; + +static const struct ceu_fmt *get_ceu_fmt_from_fourcc(unsigned int fourcc) +{ + const struct ceu_fmt *fmt = &ceu_fmt_list[0]; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(ceu_fmt_list); i++, fmt++) + if (fmt->fourcc == fourcc) + return fmt; + + return NULL; +} + +static bool ceu_fmt_mplane(struct v4l2_pix_format_mplane *pix) +{ + switch (pix->pixelformat) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YVYU: + case V4L2_PIX_FMT_VYUY: + return false; + case V4L2_PIX_FMT_NV16: + case V4L2_PIX_FMT_NV61: + case V4L2_PIX_FMT_NV12: + case V4L2_PIX_FMT_NV21: + return true; + default: + return false; + } +} + +/* --- CEU HW operations --- */ + +static void ceu_write(struct ceu_device *priv, unsigned int reg_offs, u32 data) +{ + iowrite32(data, priv->base + reg_offs); +} + +static u32 ceu_read(struct ceu_device *priv, unsigned int reg_offs) +{ + return ioread32(priv->base + reg_offs); +} + +/* + * ceu_soft_reset() - Software reset the CEU interface. + * @ceu_device: CEU device. + * + * Returns 0 for success, -EIO for error. + */ +static int ceu_soft_reset(struct ceu_device *ceudev) +{ + unsigned int i; + + ceu_write(ceudev, CEU_CAPSR, CEU_CAPSR_CPKIL); + + for (i = 0; i < 100; i++) { + if (!(ceu_read(ceudev, CEU_CSTSR) & CEU_CSTRST_CPTON)) + break; + udelay(1); + } + + if (i == 100) { + dev_err(ceudev->dev, "soft reset time out\n"); + return -EIO; + } + + for (i = 0; i < 100; i++) { + if (!(ceu_read(ceudev, CEU_CAPSR) & CEU_CAPSR_CPKIL)) + return 0; + udelay(1); + } + + /* If we get here, CEU has not reset properly. */ + return -EIO; +} + +/* --- CEU Capture Operations --- */ + +/* + * ceu_hw_config() - Configure CEU interface registers. + */ +static int ceu_hw_config(struct ceu_device *ceudev) +{ + u32 camcr, cdocr, cfzsr, cdwdr, capwr; + struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix; + struct ceu_subdev *ceu_sd = ceudev->sd; + struct ceu_mbus_fmt *mbus_fmt = &ceu_sd->mbus_fmt; + unsigned int mbus_flags = ceu_sd->mbus_flags; + + /* Start configuring CEU registers */ + ceu_write(ceudev, CEU_CAIFR, 0); + ceu_write(ceudev, CEU_CFWCR, 0); + ceu_write(ceudev, CEU_CRCNTR, 0); + ceu_write(ceudev, CEU_CRCMPR, 0); + + /* Set the frame capture period for both image capture and data sync. */ + capwr = (pix->height << 16) | pix->width * mbus_fmt->bpp / 8; + + /* + * Swap input data endianness by default. + * In data fetch mode bytes are received in chunks of 8 bytes. + * D0, D1, D2, D3, D4, D5, D6, D7 (D0 received first) + * The data is however by default written to memory in reverse order: + * D7, D6, D5, D4, D3, D2, D1, D0 (D7 written to lowest byte) + * + * Use CEU_CDOCR[2:0] to swap data ordering. + */ + cdocr = CEU_CDOCR_SWAP_ENDIANNESS; + + /* + * Configure CAMCR and CDOCR: + * match input components ordering with memory output format and + * handle downsampling to YUV420. + * + * If the memory output planar format is 'swapped' (Cr before Cb) and + * input format is not, use the swapped version of CAMCR.DTARY. + * + * If the memory output planar format is not 'swapped' (Cb before Cr) + * and input format is, use the swapped version of CAMCR.DTARY. + * + * CEU by default downsample to planar YUV420 (CDCOR[4] = 0). + * If output is planar YUV422 set CDOCR[4] = 1 + * + * No downsample for data fetch sync mode. + */ + switch (pix->pixelformat) { + /* Data fetch sync mode */ + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_YVYU: + case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_VYUY: + camcr = CEU_CAMCR_JPEG; + cdocr |= CEU_CDOCR_NO_DOWSAMPLE; + cfzsr = (pix->height << 16) | pix->width; + cdwdr = pix->plane_fmt[0].bytesperline; + break; + + /* Non-swapped planar image capture mode. */ + case V4L2_PIX_FMT_NV16: + cdocr |= CEU_CDOCR_NO_DOWSAMPLE; + fallthrough; + case V4L2_PIX_FMT_NV12: + if (mbus_fmt->swapped) + camcr = mbus_fmt->fmt_order_swap; + else + camcr = mbus_fmt->fmt_order; + + cfzsr = (pix->height << 16) | pix->width; + cdwdr = pix->width; + break; + + /* Swapped planar image capture mode. */ + case V4L2_PIX_FMT_NV61: + cdocr |= CEU_CDOCR_NO_DOWSAMPLE; + fallthrough; + case V4L2_PIX_FMT_NV21: + if (mbus_fmt->swapped) + camcr = mbus_fmt->fmt_order; + else + camcr = mbus_fmt->fmt_order_swap; + + cfzsr = (pix->height << 16) | pix->width; + cdwdr = pix->width; + break; + + default: + return -EINVAL; + } + + camcr |= mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? 1 << 1 : 0; + camcr |= mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? 1 << 0 : 0; + + /* TODO: handle 16 bit bus width with DTIF bit in CAMCR */ + ceu_write(ceudev, CEU_CAMCR, camcr); + ceu_write(ceudev, CEU_CDOCR, cdocr); + ceu_write(ceudev, CEU_CAPCR, CEU_CAPCR_BUS_WIDTH256); + + /* + * TODO: make CAMOR offsets configurable. + * CAMOR wants to know the number of blanks between a VS/HS signal + * and valid data. This value should actually come from the sensor... + */ + ceu_write(ceudev, CEU_CAMOR, 0); + + /* TODO: 16 bit bus width require re-calculation of cdwdr and cfzsr */ + ceu_write(ceudev, CEU_CAPWR, capwr); + ceu_write(ceudev, CEU_CFSZR, cfzsr); + ceu_write(ceudev, CEU_CDWDR, cdwdr); + + return 0; +} + +/* + * ceu_capture() - Trigger start of a capture sequence. + * + * Program the CEU DMA registers with addresses where to transfer image data. + */ +static int ceu_capture(struct ceu_device *ceudev) +{ + struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix; + dma_addr_t phys_addr_top; + + phys_addr_top = + vb2_dma_contig_plane_dma_addr(&ceudev->active->vb2_buf, 0); + ceu_write(ceudev, CEU_CDAYR, phys_addr_top); + + /* Ignore CbCr plane for non multi-planar image formats. */ + if (ceu_fmt_mplane(pix)) { + phys_addr_top = + vb2_dma_contig_plane_dma_addr(&ceudev->active->vb2_buf, + 1); + ceu_write(ceudev, CEU_CDACR, phys_addr_top); + } + + /* + * Trigger new capture start: once for each frame, as we work in + * one-frame capture mode. + */ + ceu_write(ceudev, CEU_CAPSR, CEU_CAPSR_CE); + + return 0; +} + +static irqreturn_t ceu_irq(int irq, void *data) +{ + struct ceu_device *ceudev = data; + struct vb2_v4l2_buffer *vbuf; + struct ceu_buffer *buf; + u32 status; + + /* Clean interrupt status. */ + status = ceu_read(ceudev, CEU_CETCR); + ceu_write(ceudev, CEU_CETCR, ~ceudev->irq_mask); + + /* Unexpected interrupt. */ + if (!(status & CEU_CEIER_MASK)) + return IRQ_NONE; + + spin_lock(&ceudev->lock); + + /* Stale interrupt from a released buffer, ignore it. */ + vbuf = ceudev->active; + if (!vbuf) { + spin_unlock(&ceudev->lock); + return IRQ_HANDLED; + } + + /* + * When a VBP interrupt occurs, no capture end interrupt will occur + * and the image of that frame is not captured correctly. + */ + if (status & CEU_CEIER_VBP) { + dev_err(ceudev->dev, "VBP interrupt: abort capture\n"); + goto error_irq_out; + } + + /* Prepare to return the 'previous' buffer. */ + vbuf->vb2_buf.timestamp = ktime_get_ns(); + vbuf->sequence = ceudev->sequence++; + vbuf->field = ceudev->field; + + /* Prepare a new 'active' buffer and trigger a new capture. */ + if (!list_empty(&ceudev->capture)) { + buf = list_first_entry(&ceudev->capture, struct ceu_buffer, + queue); + list_del(&buf->queue); + ceudev->active = &buf->vb; + + ceu_capture(ceudev); + } + + /* Return the 'previous' buffer. */ + vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_DONE); + + spin_unlock(&ceudev->lock); + + return IRQ_HANDLED; + +error_irq_out: + /* Return the 'previous' buffer and all queued ones. */ + vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_ERROR); + + list_for_each_entry(buf, &ceudev->capture, queue) + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + + spin_unlock(&ceudev->lock); + + return IRQ_HANDLED; +} + +/* --- CEU Videobuf2 operations --- */ + +static void ceu_update_plane_sizes(struct v4l2_plane_pix_format *plane, + unsigned int bpl, unsigned int szimage) +{ + memset(plane, 0, sizeof(*plane)); + + plane->sizeimage = szimage; + if (plane->bytesperline < bpl || plane->bytesperline > CEU_MAX_BPL) + plane->bytesperline = bpl; +} + +/* + * ceu_calc_plane_sizes() - Fill per-plane 'struct v4l2_plane_pix_format' + * information according to the currently configured + * pixel format. + * @ceu_device: CEU device. + * @ceu_fmt: Active image format. + * @pix: Pixel format information (store line width and image sizes) + */ +static void ceu_calc_plane_sizes(struct ceu_device *ceudev, + const struct ceu_fmt *ceu_fmt, + struct v4l2_pix_format_mplane *pix) +{ + unsigned int bpl, szimage; + + switch (pix->pixelformat) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_YVYU: + case V4L2_PIX_FMT_VYUY: + pix->num_planes = 1; + bpl = pix->width * ceu_fmt->bpp / 8; + szimage = pix->height * bpl; + ceu_update_plane_sizes(&pix->plane_fmt[0], bpl, szimage); + break; + + case V4L2_PIX_FMT_NV12: + case V4L2_PIX_FMT_NV21: + pix->num_planes = 2; + bpl = pix->width; + szimage = pix->height * pix->width; + ceu_update_plane_sizes(&pix->plane_fmt[0], bpl, szimage); + ceu_update_plane_sizes(&pix->plane_fmt[1], bpl, szimage / 2); + break; + + case V4L2_PIX_FMT_NV16: + case V4L2_PIX_FMT_NV61: + default: + pix->num_planes = 2; + bpl = pix->width; + szimage = pix->height * pix->width; + ceu_update_plane_sizes(&pix->plane_fmt[0], bpl, szimage); + ceu_update_plane_sizes(&pix->plane_fmt[1], bpl, szimage); + break; + } +} + +/* + * ceu_vb2_setup() - is called to check whether the driver can accept the + * requested number of buffers and to fill in plane sizes + * for the current frame format, if required. + */ +static int ceu_vb2_setup(struct vb2_queue *vq, unsigned int *count, + unsigned int *num_planes, unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct ceu_device *ceudev = vb2_get_drv_priv(vq); + struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix; + unsigned int i; + + /* num_planes is set: just check plane sizes. */ + if (*num_planes) { + for (i = 0; i < pix->num_planes; i++) + if (sizes[i] < pix->plane_fmt[i].sizeimage) + return -EINVAL; + + return 0; + } + + /* num_planes not set: called from REQBUFS, just set plane sizes. */ + *num_planes = pix->num_planes; + for (i = 0; i < pix->num_planes; i++) + sizes[i] = pix->plane_fmt[i].sizeimage; + + return 0; +} + +static void ceu_vb2_queue(struct vb2_buffer *vb) +{ + struct ceu_device *ceudev = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct ceu_buffer *buf = vb2_to_ceu(vbuf); + unsigned long irqflags; + + spin_lock_irqsave(&ceudev->lock, irqflags); + list_add_tail(&buf->queue, &ceudev->capture); + spin_unlock_irqrestore(&ceudev->lock, irqflags); +} + +static int ceu_vb2_prepare(struct vb2_buffer *vb) +{ + struct ceu_device *ceudev = vb2_get_drv_priv(vb->vb2_queue); + struct v4l2_pix_format_mplane *pix = &ceudev->v4l2_pix; + unsigned int i; + + for (i = 0; i < pix->num_planes; i++) { + if (vb2_plane_size(vb, i) < pix->plane_fmt[i].sizeimage) { + dev_err(ceudev->dev, + "Plane size too small (%lu < %u)\n", + vb2_plane_size(vb, i), + pix->plane_fmt[i].sizeimage); + return -EINVAL; + } + + vb2_set_plane_payload(vb, i, pix->plane_fmt[i].sizeimage); + } + + return 0; +} + +static int ceu_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct ceu_device *ceudev = vb2_get_drv_priv(vq); + struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd; + struct ceu_buffer *buf; + unsigned long irqflags; + int ret; + + /* Program the CEU interface according to the CEU image format. */ + ret = ceu_hw_config(ceudev); + if (ret) + goto error_return_bufs; + + ret = v4l2_subdev_call(v4l2_sd, video, s_stream, 1); + if (ret && ret != -ENOIOCTLCMD) { + dev_dbg(ceudev->dev, + "Subdevice failed to start streaming: %d\n", ret); + goto error_return_bufs; + } + + spin_lock_irqsave(&ceudev->lock, irqflags); + ceudev->sequence = 0; + + /* Grab the first available buffer and trigger the first capture. */ + buf = list_first_entry(&ceudev->capture, struct ceu_buffer, + queue); + if (!buf) { + spin_unlock_irqrestore(&ceudev->lock, irqflags); + dev_dbg(ceudev->dev, + "No buffer available for capture.\n"); + goto error_stop_sensor; + } + + list_del(&buf->queue); + ceudev->active = &buf->vb; + + /* Clean and program interrupts for first capture. */ + ceu_write(ceudev, CEU_CETCR, ~ceudev->irq_mask); + ceu_write(ceudev, CEU_CEIER, CEU_CEIER_MASK); + + ceu_capture(ceudev); + + spin_unlock_irqrestore(&ceudev->lock, irqflags); + + return 0; + +error_stop_sensor: + v4l2_subdev_call(v4l2_sd, video, s_stream, 0); + +error_return_bufs: + spin_lock_irqsave(&ceudev->lock, irqflags); + list_for_each_entry(buf, &ceudev->capture, queue) + vb2_buffer_done(&ceudev->active->vb2_buf, + VB2_BUF_STATE_QUEUED); + ceudev->active = NULL; + spin_unlock_irqrestore(&ceudev->lock, irqflags); + + return ret; +} + +static void ceu_stop_streaming(struct vb2_queue *vq) +{ + struct ceu_device *ceudev = vb2_get_drv_priv(vq); + struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd; + struct ceu_buffer *buf; + unsigned long irqflags; + + /* Clean and disable interrupt sources. */ + ceu_write(ceudev, CEU_CETCR, + ceu_read(ceudev, CEU_CETCR) & ceudev->irq_mask); + ceu_write(ceudev, CEU_CEIER, CEU_CEIER_MASK); + + v4l2_subdev_call(v4l2_sd, video, s_stream, 0); + + spin_lock_irqsave(&ceudev->lock, irqflags); + if (ceudev->active) { + vb2_buffer_done(&ceudev->active->vb2_buf, + VB2_BUF_STATE_ERROR); + ceudev->active = NULL; + } + + /* Release all queued buffers. */ + list_for_each_entry(buf, &ceudev->capture, queue) + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + INIT_LIST_HEAD(&ceudev->capture); + + spin_unlock_irqrestore(&ceudev->lock, irqflags); + + ceu_soft_reset(ceudev); +} + +static const struct vb2_ops ceu_vb2_ops = { + .queue_setup = ceu_vb2_setup, + .buf_queue = ceu_vb2_queue, + .buf_prepare = ceu_vb2_prepare, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .start_streaming = ceu_start_streaming, + .stop_streaming = ceu_stop_streaming, +}; + +/* --- CEU image formats handling --- */ + +/* + * __ceu_try_fmt() - test format on CEU and sensor + * @ceudev: The CEU device. + * @v4l2_fmt: format to test. + * @sd_mbus_code: the media bus code accepted by the subdevice; output param. + * + * Returns 0 for success, < 0 for errors. + */ +static int __ceu_try_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt, + u32 *sd_mbus_code) +{ + struct ceu_subdev *ceu_sd = ceudev->sd; + struct v4l2_pix_format_mplane *pix = &v4l2_fmt->fmt.pix_mp; + struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd; + struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { + .pads = &pad_cfg + }; + const struct ceu_fmt *ceu_fmt; + u32 mbus_code_old; + u32 mbus_code; + int ret; + + /* + * Set format on sensor sub device: bus format used to produce memory + * format is selected depending on YUV component ordering or + * at initialization time. + */ + struct v4l2_subdev_format sd_format = { + .which = V4L2_SUBDEV_FORMAT_TRY, + }; + + mbus_code_old = ceu_sd->mbus_fmt.mbus_code; + + switch (pix->pixelformat) { + case V4L2_PIX_FMT_YUYV: + mbus_code = MEDIA_BUS_FMT_YUYV8_2X8; + break; + case V4L2_PIX_FMT_UYVY: + mbus_code = MEDIA_BUS_FMT_UYVY8_2X8; + break; + case V4L2_PIX_FMT_YVYU: + mbus_code = MEDIA_BUS_FMT_YVYU8_2X8; + break; + case V4L2_PIX_FMT_VYUY: + mbus_code = MEDIA_BUS_FMT_VYUY8_2X8; + break; + case V4L2_PIX_FMT_NV16: + case V4L2_PIX_FMT_NV61: + case V4L2_PIX_FMT_NV12: + case V4L2_PIX_FMT_NV21: + mbus_code = ceu_sd->mbus_fmt.mbus_code; + break; + + default: + pix->pixelformat = V4L2_PIX_FMT_NV16; + mbus_code = ceu_sd->mbus_fmt.mbus_code; + break; + } + + ceu_fmt = get_ceu_fmt_from_fourcc(pix->pixelformat); + + /* CFSZR requires height and width to be 4-pixel aligned. */ + v4l_bound_align_image(&pix->width, 2, CEU_MAX_WIDTH, 4, + &pix->height, 4, CEU_MAX_HEIGHT, 4, 0); + + v4l2_fill_mbus_format_mplane(&sd_format.format, pix); + + /* + * Try with the mbus_code matching YUYV components ordering first, + * if that one fails, fallback to default selected at initialization + * time. + */ + sd_format.format.code = mbus_code; + ret = v4l2_subdev_call(v4l2_sd, pad, set_fmt, &pad_state, &sd_format); + if (ret) { + if (ret == -EINVAL) { + /* fallback */ + sd_format.format.code = mbus_code_old; + ret = v4l2_subdev_call(v4l2_sd, pad, set_fmt, + &pad_state, &sd_format); + } + + if (ret) + return ret; + } + + /* Apply size returned by sensor as the CEU can't scale. */ + v4l2_fill_pix_format_mplane(pix, &sd_format.format); + + /* Calculate per-plane sizes based on image format. */ + ceu_calc_plane_sizes(ceudev, ceu_fmt, pix); + + /* Report to caller the configured mbus format. */ + *sd_mbus_code = sd_format.format.code; + + return 0; +} + +/* + * ceu_try_fmt() - Wrapper for __ceu_try_fmt; discard configured mbus_fmt + */ +static int ceu_try_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt) +{ + u32 mbus_code; + + return __ceu_try_fmt(ceudev, v4l2_fmt, &mbus_code); +} + +/* + * ceu_set_fmt() - Apply the supplied format to both sensor and CEU + */ +static int ceu_set_fmt(struct ceu_device *ceudev, struct v4l2_format *v4l2_fmt) +{ + struct ceu_subdev *ceu_sd = ceudev->sd; + struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd; + u32 mbus_code; + int ret; + + /* + * Set format on sensor sub device: bus format used to produce memory + * format is selected at initialization time. + */ + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + + ret = __ceu_try_fmt(ceudev, v4l2_fmt, &mbus_code); + if (ret) + return ret; + + format.format.code = mbus_code; + v4l2_fill_mbus_format_mplane(&format.format, &v4l2_fmt->fmt.pix_mp); + ret = v4l2_subdev_call(v4l2_sd, pad, set_fmt, NULL, &format); + if (ret) + return ret; + + ceudev->v4l2_pix = v4l2_fmt->fmt.pix_mp; + ceudev->field = V4L2_FIELD_NONE; + + return 0; +} + +/* + * ceu_set_default_fmt() - Apply default NV16 memory output format with VGA + * sizes. + */ +static int ceu_set_default_fmt(struct ceu_device *ceudev) +{ + int ret; + + struct v4l2_format v4l2_fmt = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, + .fmt.pix_mp = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .field = V4L2_FIELD_NONE, + .pixelformat = V4L2_PIX_FMT_NV16, + .num_planes = 2, + .plane_fmt = { + [0] = { + .sizeimage = VGA_WIDTH * VGA_HEIGHT * 2, + .bytesperline = VGA_WIDTH * 2, + }, + [1] = { + .sizeimage = VGA_WIDTH * VGA_HEIGHT * 2, + .bytesperline = VGA_WIDTH * 2, + }, + }, + }, + }; + + ret = ceu_try_fmt(ceudev, &v4l2_fmt); + if (ret) + return ret; + + ceudev->v4l2_pix = v4l2_fmt.fmt.pix_mp; + ceudev->field = V4L2_FIELD_NONE; + + return 0; +} + +/* + * ceu_init_mbus_fmt() - Query sensor for supported formats and initialize + * CEU media bus format used to produce memory formats. + * + * Find out if sensor can produce a permutation of 8-bits YUYV bus format. + * From a single 8-bits YUYV bus format the CEU can produce several memory + * output formats: + * - NV[12|21|16|61] through image fetch mode; + * - YUYV422 if sensor provides YUYV422 + * + * TODO: Other YUYV422 permutations through data fetch sync mode and DTARY + * TODO: Binary data (eg. JPEG) and raw formats through data fetch sync mode + */ +static int ceu_init_mbus_fmt(struct ceu_device *ceudev) +{ + struct ceu_subdev *ceu_sd = ceudev->sd; + struct ceu_mbus_fmt *mbus_fmt = &ceu_sd->mbus_fmt; + struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd; + bool yuyv_bus_fmt = false; + + struct v4l2_subdev_mbus_code_enum sd_mbus_fmt = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .index = 0, + }; + + /* Find out if sensor can produce any permutation of 8-bits YUYV422. */ + while (!yuyv_bus_fmt && + !v4l2_subdev_call(v4l2_sd, pad, enum_mbus_code, + NULL, &sd_mbus_fmt)) { + switch (sd_mbus_fmt.code) { + case MEDIA_BUS_FMT_YUYV8_2X8: + case MEDIA_BUS_FMT_YVYU8_2X8: + case MEDIA_BUS_FMT_UYVY8_2X8: + case MEDIA_BUS_FMT_VYUY8_2X8: + yuyv_bus_fmt = true; + break; + default: + /* + * Only support 8-bits YUYV bus formats at the moment; + * + * TODO: add support for binary formats (data sync + * fetch mode). + */ + break; + } + + sd_mbus_fmt.index++; + } + + if (!yuyv_bus_fmt) + return -ENXIO; + + /* + * Save the first encountered YUYV format as "mbus_fmt" and use it + * to output all planar YUV422 and YUV420 (NV*) formats to memory as + * well as for data synch fetch mode (YUYV - YVYU etc. ). + */ + mbus_fmt->mbus_code = sd_mbus_fmt.code; + mbus_fmt->bps = 8; + + /* Annotate the selected bus format components ordering. */ + switch (sd_mbus_fmt.code) { + case MEDIA_BUS_FMT_YUYV8_2X8: + mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_YUYV; + mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_YVYU; + mbus_fmt->swapped = false; + mbus_fmt->bpp = 16; + break; + + case MEDIA_BUS_FMT_YVYU8_2X8: + mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_YVYU; + mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_YUYV; + mbus_fmt->swapped = true; + mbus_fmt->bpp = 16; + break; + + case MEDIA_BUS_FMT_UYVY8_2X8: + mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_UYVY; + mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_VYUY; + mbus_fmt->swapped = false; + mbus_fmt->bpp = 16; + break; + + case MEDIA_BUS_FMT_VYUY8_2X8: + mbus_fmt->fmt_order = CEU_CAMCR_DTARY_8_VYUY; + mbus_fmt->fmt_order_swap = CEU_CAMCR_DTARY_8_UYVY; + mbus_fmt->swapped = true; + mbus_fmt->bpp = 16; + break; + } + + return 0; +} + +/* --- Runtime PM Handlers --- */ + +/* + * ceu_runtime_resume() - soft-reset the interface and turn sensor power on. + */ +static int __maybe_unused ceu_runtime_resume(struct device *dev) +{ + struct ceu_device *ceudev = dev_get_drvdata(dev); + struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd; + + v4l2_subdev_call(v4l2_sd, core, s_power, 1); + + ceu_soft_reset(ceudev); + + return 0; +} + +/* + * ceu_runtime_suspend() - disable capture and interrupts and soft-reset. + * Turn sensor power off. + */ +static int __maybe_unused ceu_runtime_suspend(struct device *dev) +{ + struct ceu_device *ceudev = dev_get_drvdata(dev); + struct v4l2_subdev *v4l2_sd = ceudev->sd->v4l2_sd; + + v4l2_subdev_call(v4l2_sd, core, s_power, 0); + + ceu_write(ceudev, CEU_CEIER, 0); + ceu_soft_reset(ceudev); + + return 0; +} + +/* --- File Operations --- */ + +static int ceu_open(struct file *file) +{ + struct ceu_device *ceudev = video_drvdata(file); + int ret; + + ret = v4l2_fh_open(file); + if (ret) + return ret; + + mutex_lock(&ceudev->mlock); + /* Causes soft-reset and sensor power on on first open */ + ret = pm_runtime_resume_and_get(ceudev->dev); + mutex_unlock(&ceudev->mlock); + + return ret; +} + +static int ceu_release(struct file *file) +{ + struct ceu_device *ceudev = video_drvdata(file); + + vb2_fop_release(file); + + mutex_lock(&ceudev->mlock); + /* Causes soft-reset and sensor power down on last close */ + pm_runtime_put(ceudev->dev); + mutex_unlock(&ceudev->mlock); + + return 0; +} + +static const struct v4l2_file_operations ceu_fops = { + .owner = THIS_MODULE, + .open = ceu_open, + .release = ceu_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vb2_fop_mmap, + .poll = vb2_fop_poll, +}; + +/* --- Video Device IOCTLs --- */ + +static int ceu_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct ceu_device *ceudev = video_drvdata(file); + + strscpy(cap->card, "Renesas CEU", sizeof(cap->card)); + strscpy(cap->driver, DRIVER_NAME, sizeof(cap->driver)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:renesas-ceu-%s", dev_name(ceudev->dev)); + + return 0; +} + +static int ceu_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + const struct ceu_fmt *fmt; + + if (f->index >= ARRAY_SIZE(ceu_fmt_list)) + return -EINVAL; + + fmt = &ceu_fmt_list[f->index]; + f->pixelformat = fmt->fourcc; + + return 0; +} + +static int ceu_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct ceu_device *ceudev = video_drvdata(file); + + return ceu_try_fmt(ceudev, f); +} + +static int ceu_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct ceu_device *ceudev = video_drvdata(file); + + if (vb2_is_streaming(&ceudev->vb2_vq)) + return -EBUSY; + + return ceu_set_fmt(ceudev, f); +} + +static int ceu_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct ceu_device *ceudev = video_drvdata(file); + + f->fmt.pix_mp = ceudev->v4l2_pix; + + return 0; +} + +static int ceu_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + struct ceu_device *ceudev = video_drvdata(file); + struct ceu_subdev *ceusd; + + if (inp->index >= ceudev->num_sd) + return -EINVAL; + + ceusd = ceudev->subdevs[inp->index]; + + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = 0; + snprintf(inp->name, sizeof(inp->name), "Camera%u: %s", + inp->index, ceusd->v4l2_sd->name); + + return 0; +} + +static int ceu_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct ceu_device *ceudev = video_drvdata(file); + + *i = ceudev->sd_index; + + return 0; +} + +static int ceu_s_input(struct file *file, void *priv, unsigned int i) +{ + struct ceu_device *ceudev = video_drvdata(file); + struct ceu_subdev *ceu_sd_old; + int ret; + + if (i >= ceudev->num_sd) + return -EINVAL; + + if (vb2_is_streaming(&ceudev->vb2_vq)) + return -EBUSY; + + if (i == ceudev->sd_index) + return 0; + + ceu_sd_old = ceudev->sd; + ceudev->sd = ceudev->subdevs[i]; + + /* + * Make sure we can generate output image formats and apply + * default one. + */ + ret = ceu_init_mbus_fmt(ceudev); + if (ret) { + ceudev->sd = ceu_sd_old; + return -EINVAL; + } + + ret = ceu_set_default_fmt(ceudev); + if (ret) { + ceudev->sd = ceu_sd_old; + return -EINVAL; + } + + /* Now that we're sure we can use the sensor, power off the old one. */ + v4l2_subdev_call(ceu_sd_old->v4l2_sd, core, s_power, 0); + v4l2_subdev_call(ceudev->sd->v4l2_sd, core, s_power, 1); + + ceudev->sd_index = i; + + return 0; +} + +static int ceu_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) +{ + struct ceu_device *ceudev = video_drvdata(file); + + return v4l2_g_parm_cap(video_devdata(file), ceudev->sd->v4l2_sd, a); +} + +static int ceu_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a) +{ + struct ceu_device *ceudev = video_drvdata(file); + + return v4l2_s_parm_cap(video_devdata(file), ceudev->sd->v4l2_sd, a); +} + +static int ceu_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + struct ceu_device *ceudev = video_drvdata(file); + struct ceu_subdev *ceu_sd = ceudev->sd; + const struct ceu_fmt *ceu_fmt; + struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd; + int ret; + + struct v4l2_subdev_frame_size_enum fse = { + .code = ceu_sd->mbus_fmt.mbus_code, + .index = fsize->index, + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + + /* Just check if user supplied pixel format is supported. */ + ceu_fmt = get_ceu_fmt_from_fourcc(fsize->pixel_format); + if (!ceu_fmt) + return -EINVAL; + + ret = v4l2_subdev_call(v4l2_sd, pad, enum_frame_size, + NULL, &fse); + if (ret) + return ret; + + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = CEU_W_MAX(fse.max_width); + fsize->discrete.height = CEU_H_MAX(fse.max_height); + + return 0; +} + +static int ceu_enum_frameintervals(struct file *file, void *fh, + struct v4l2_frmivalenum *fival) +{ + struct ceu_device *ceudev = video_drvdata(file); + struct ceu_subdev *ceu_sd = ceudev->sd; + const struct ceu_fmt *ceu_fmt; + struct v4l2_subdev *v4l2_sd = ceu_sd->v4l2_sd; + int ret; + + struct v4l2_subdev_frame_interval_enum fie = { + .code = ceu_sd->mbus_fmt.mbus_code, + .index = fival->index, + .width = fival->width, + .height = fival->height, + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + + /* Just check if user supplied pixel format is supported. */ + ceu_fmt = get_ceu_fmt_from_fourcc(fival->pixel_format); + if (!ceu_fmt) + return -EINVAL; + + ret = v4l2_subdev_call(v4l2_sd, pad, enum_frame_interval, NULL, + &fie); + if (ret) + return ret; + + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; + fival->discrete = fie.interval; + + return 0; +} + +static const struct v4l2_ioctl_ops ceu_ioctl_ops = { + .vidioc_querycap = ceu_querycap, + + .vidioc_enum_fmt_vid_cap = ceu_enum_fmt_vid_cap, + .vidioc_try_fmt_vid_cap_mplane = ceu_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap_mplane = ceu_s_fmt_vid_cap, + .vidioc_g_fmt_vid_cap_mplane = ceu_g_fmt_vid_cap, + + .vidioc_enum_input = ceu_enum_input, + .vidioc_g_input = ceu_g_input, + .vidioc_s_input = ceu_s_input, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_g_parm = ceu_g_parm, + .vidioc_s_parm = ceu_s_parm, + .vidioc_enum_framesizes = ceu_enum_framesizes, + .vidioc_enum_frameintervals = ceu_enum_frameintervals, + + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +/* + * ceu_vdev_release() - release CEU video device memory when last reference + * to this driver is closed + */ +static void ceu_vdev_release(struct video_device *vdev) +{ + struct ceu_device *ceudev = video_get_drvdata(vdev); + + kfree(ceudev); +} + +static int ceu_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *v4l2_sd, + struct v4l2_async_subdev *asd) +{ + struct v4l2_device *v4l2_dev = notifier->v4l2_dev; + struct ceu_device *ceudev = v4l2_to_ceu(v4l2_dev); + struct ceu_subdev *ceu_sd = to_ceu_subdev(asd); + + ceu_sd->v4l2_sd = v4l2_sd; + ceudev->num_sd++; + + return 0; +} + +static int ceu_notify_complete(struct v4l2_async_notifier *notifier) +{ + struct v4l2_device *v4l2_dev = notifier->v4l2_dev; + struct ceu_device *ceudev = v4l2_to_ceu(v4l2_dev); + struct video_device *vdev = &ceudev->vdev; + struct vb2_queue *q = &ceudev->vb2_vq; + struct v4l2_subdev *v4l2_sd; + int ret; + + /* Initialize vb2 queue. */ + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + q->io_modes = VB2_MMAP | VB2_DMABUF; + q->drv_priv = ceudev; + q->ops = &ceu_vb2_ops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct ceu_buffer); + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->min_buffers_needed = 2; + q->lock = &ceudev->mlock; + q->dev = ceudev->v4l2_dev.dev; + + ret = vb2_queue_init(q); + if (ret) + return ret; + + /* + * Make sure at least one sensor is primary and use it to initialize + * ceu formats. + */ + if (!ceudev->sd) { + ceudev->sd = ceudev->subdevs[0]; + ceudev->sd_index = 0; + } + + v4l2_sd = ceudev->sd->v4l2_sd; + + ret = ceu_init_mbus_fmt(ceudev); + if (ret) + return ret; + + ret = ceu_set_default_fmt(ceudev); + if (ret) + return ret; + + /* Register the video device. */ + strscpy(vdev->name, DRIVER_NAME, sizeof(vdev->name)); + vdev->v4l2_dev = v4l2_dev; + vdev->lock = &ceudev->mlock; + vdev->queue = &ceudev->vb2_vq; + vdev->ctrl_handler = v4l2_sd->ctrl_handler; + vdev->fops = &ceu_fops; + vdev->ioctl_ops = &ceu_ioctl_ops; + vdev->release = ceu_vdev_release; + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE | + V4L2_CAP_STREAMING; + video_set_drvdata(vdev, ceudev); + + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); + if (ret < 0) { + v4l2_err(vdev->v4l2_dev, + "video_register_device failed: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct v4l2_async_notifier_operations ceu_notify_ops = { + .bound = ceu_notify_bound, + .complete = ceu_notify_complete, +}; + +/* + * ceu_init_async_subdevs() - Initialize CEU subdevices and async_subdevs in + * ceu device. Both DT and platform data parsing use + * this routine. + * + * Returns 0 for success, -ENOMEM for failure. + */ +static int ceu_init_async_subdevs(struct ceu_device *ceudev, unsigned int n_sd) +{ + /* Reserve memory for 'n_sd' ceu_subdev descriptors. */ + ceudev->subdevs = devm_kcalloc(ceudev->dev, n_sd, + sizeof(*ceudev->subdevs), GFP_KERNEL); + if (!ceudev->subdevs) + return -ENOMEM; + + ceudev->sd = NULL; + ceudev->sd_index = 0; + ceudev->num_sd = 0; + + return 0; +} + +/* + * ceu_parse_platform_data() - Initialize async_subdevices using platform + * device provided data. + */ +static int ceu_parse_platform_data(struct ceu_device *ceudev, + const struct ceu_platform_data *pdata) +{ + const struct ceu_async_subdev *async_sd; + struct ceu_subdev *ceu_sd; + unsigned int i; + int ret; + + if (pdata->num_subdevs == 0) + return -ENODEV; + + ret = ceu_init_async_subdevs(ceudev, pdata->num_subdevs); + if (ret) + return ret; + + for (i = 0; i < pdata->num_subdevs; i++) { + + /* Setup the ceu subdevice and the async subdevice. */ + async_sd = &pdata->subdevs[i]; + ceu_sd = v4l2_async_nf_add_i2c(&ceudev->notifier, + async_sd->i2c_adapter_id, + async_sd->i2c_address, + struct ceu_subdev); + if (IS_ERR(ceu_sd)) { + v4l2_async_nf_cleanup(&ceudev->notifier); + return PTR_ERR(ceu_sd); + } + ceu_sd->mbus_flags = async_sd->flags; + ceudev->subdevs[i] = ceu_sd; + } + + return pdata->num_subdevs; +} + +/* + * ceu_parse_dt() - Initialize async_subdevs parsing device tree graph. + */ +static int ceu_parse_dt(struct ceu_device *ceudev) +{ + struct device_node *of = ceudev->dev->of_node; + struct device_node *ep; + struct ceu_subdev *ceu_sd; + unsigned int i; + int num_ep; + int ret; + + num_ep = of_graph_get_endpoint_count(of); + if (!num_ep) + return -ENODEV; + + ret = ceu_init_async_subdevs(ceudev, num_ep); + if (ret) + return ret; + + for (i = 0; i < num_ep; i++) { + struct v4l2_fwnode_endpoint fw_ep = { + .bus_type = V4L2_MBUS_PARALLEL, + .bus = { + .parallel = { + .flags = V4L2_MBUS_HSYNC_ACTIVE_HIGH | + V4L2_MBUS_VSYNC_ACTIVE_HIGH, + .bus_width = 8, + }, + }, + }; + + ep = of_graph_get_endpoint_by_regs(of, 0, i); + if (!ep) { + dev_err(ceudev->dev, + "No subdevice connected on endpoint %u.\n", i); + ret = -ENODEV; + goto error_cleanup; + } + + ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &fw_ep); + if (ret) { + dev_err(ceudev->dev, + "Unable to parse endpoint #%u: %d.\n", i, ret); + goto error_cleanup; + } + + /* Setup the ceu subdevice and the async subdevice. */ + ceu_sd = v4l2_async_nf_add_fwnode_remote(&ceudev->notifier, + of_fwnode_handle(ep), + struct ceu_subdev); + if (IS_ERR(ceu_sd)) { + ret = PTR_ERR(ceu_sd); + goto error_cleanup; + } + ceu_sd->mbus_flags = fw_ep.bus.parallel.flags; + ceudev->subdevs[i] = ceu_sd; + + of_node_put(ep); + } + + return num_ep; + +error_cleanup: + v4l2_async_nf_cleanup(&ceudev->notifier); + of_node_put(ep); + return ret; +} + +/* + * struct ceu_data - Platform specific CEU data + * @irq_mask: CETCR mask with all interrupt sources enabled. The mask differs + * between SH4 and RZ platforms. + */ +struct ceu_data { + u32 irq_mask; +}; + +static const struct ceu_data ceu_data_sh4 = { + .irq_mask = CEU_CETCR_ALL_IRQS_SH4, +}; + +#if IS_ENABLED(CONFIG_OF) +static const struct ceu_data ceu_data_rz = { + .irq_mask = CEU_CETCR_ALL_IRQS_RZ, +}; + +static const struct of_device_id ceu_of_match[] = { + { .compatible = "renesas,r7s72100-ceu", .data = &ceu_data_rz }, + { .compatible = "renesas,r8a7740-ceu", .data = &ceu_data_rz }, + { } +}; +MODULE_DEVICE_TABLE(of, ceu_of_match); +#endif + +static int ceu_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct ceu_data *ceu_data; + struct ceu_device *ceudev; + unsigned int irq; + int num_subdevs; + int ret; + + ceudev = kzalloc(sizeof(*ceudev), GFP_KERNEL); + if (!ceudev) + return -ENOMEM; + + platform_set_drvdata(pdev, ceudev); + ceudev->dev = dev; + + INIT_LIST_HEAD(&ceudev->capture); + spin_lock_init(&ceudev->lock); + mutex_init(&ceudev->mlock); + + ceudev->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(ceudev->base)) { + ret = PTR_ERR(ceudev->base); + goto error_free_ceudev; + } + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + goto error_free_ceudev; + irq = ret; + + ret = devm_request_irq(dev, irq, ceu_irq, + 0, dev_name(dev), ceudev); + if (ret) { + dev_err(&pdev->dev, "Unable to request CEU interrupt.\n"); + goto error_free_ceudev; + } + + pm_runtime_enable(dev); + + ret = v4l2_device_register(dev, &ceudev->v4l2_dev); + if (ret) + goto error_pm_disable; + + v4l2_async_nf_init(&ceudev->notifier); + + if (IS_ENABLED(CONFIG_OF) && dev->of_node) { + ceu_data = of_device_get_match_data(dev); + num_subdevs = ceu_parse_dt(ceudev); + } else if (dev->platform_data) { + /* Assume SH4 if booting with platform data. */ + ceu_data = &ceu_data_sh4; + num_subdevs = ceu_parse_platform_data(ceudev, + dev->platform_data); + } else { + num_subdevs = -EINVAL; + } + + if (num_subdevs < 0) { + ret = num_subdevs; + goto error_v4l2_unregister; + } + ceudev->irq_mask = ceu_data->irq_mask; + + ceudev->notifier.v4l2_dev = &ceudev->v4l2_dev; + ceudev->notifier.ops = &ceu_notify_ops; + ret = v4l2_async_nf_register(&ceudev->v4l2_dev, &ceudev->notifier); + if (ret) + goto error_cleanup; + + dev_info(dev, "Renesas Capture Engine Unit %s\n", dev_name(dev)); + + return 0; + +error_cleanup: + v4l2_async_nf_cleanup(&ceudev->notifier); +error_v4l2_unregister: + v4l2_device_unregister(&ceudev->v4l2_dev); +error_pm_disable: + pm_runtime_disable(dev); +error_free_ceudev: + kfree(ceudev); + + return ret; +} + +static int ceu_remove(struct platform_device *pdev) +{ + struct ceu_device *ceudev = platform_get_drvdata(pdev); + + pm_runtime_disable(ceudev->dev); + + v4l2_async_nf_unregister(&ceudev->notifier); + + v4l2_async_nf_cleanup(&ceudev->notifier); + + v4l2_device_unregister(&ceudev->v4l2_dev); + + video_unregister_device(&ceudev->vdev); + + return 0; +} + +static const struct dev_pm_ops ceu_pm_ops = { + SET_RUNTIME_PM_OPS(ceu_runtime_suspend, + ceu_runtime_resume, + NULL) +}; + +static struct platform_driver ceu_driver = { + .driver = { + .name = DRIVER_NAME, + .pm = &ceu_pm_ops, + .of_match_table = of_match_ptr(ceu_of_match), + }, + .probe = ceu_probe, + .remove = ceu_remove, +}; + +module_platform_driver(ceu_driver); + +MODULE_DESCRIPTION("Renesas CEU camera driver"); +MODULE_AUTHOR("Jacopo Mondi <jacopo+renesas@jmondi.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/platform/renesas/sh_vou.c b/drivers/media/platform/renesas/sh_vou.c new file mode 100644 index 000000000..ca4310e26 --- /dev/null +++ b/drivers/media/platform/renesas/sh_vou.c @@ -0,0 +1,1375 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SuperH Video Output Unit (VOU) driver + * + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + */ + +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/videodev2.h> +#include <linux/module.h> + +#include <media/drv-intf/sh_vou.h> +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-mediabus.h> +#include <media/videobuf2-v4l2.h> +#include <media/videobuf2-dma-contig.h> + +/* Mirror addresses are not available for all registers */ +#define VOUER 0 +#define VOUCR 4 +#define VOUSTR 8 +#define VOUVCR 0xc +#define VOUISR 0x10 +#define VOUBCR 0x14 +#define VOUDPR 0x18 +#define VOUDSR 0x1c +#define VOUVPR 0x20 +#define VOUIR 0x24 +#define VOUSRR 0x28 +#define VOUMSR 0x2c +#define VOUHIR 0x30 +#define VOUDFR 0x34 +#define VOUAD1R 0x38 +#define VOUAD2R 0x3c +#define VOUAIR 0x40 +#define VOUSWR 0x44 +#define VOURCR 0x48 +#define VOURPR 0x50 + +enum sh_vou_status { + SH_VOU_IDLE, + SH_VOU_INITIALISING, + SH_VOU_RUNNING, +}; + +#define VOU_MIN_IMAGE_WIDTH 16 +#define VOU_MAX_IMAGE_WIDTH 720 +#define VOU_MIN_IMAGE_HEIGHT 16 + +struct sh_vou_buffer { + struct vb2_v4l2_buffer vb; + struct list_head list; +}; + +static inline struct +sh_vou_buffer *to_sh_vou_buffer(struct vb2_v4l2_buffer *vb2) +{ + return container_of(vb2, struct sh_vou_buffer, vb); +} + +struct sh_vou_device { + struct v4l2_device v4l2_dev; + struct video_device vdev; + struct sh_vou_pdata *pdata; + spinlock_t lock; + void __iomem *base; + /* State information */ + struct v4l2_pix_format pix; + struct v4l2_rect rect; + struct list_head buf_list; + v4l2_std_id std; + int pix_idx; + struct vb2_queue queue; + struct sh_vou_buffer *active; + enum sh_vou_status status; + unsigned sequence; + struct mutex fop_lock; +}; + +/* Register access routines for sides A, B and mirror addresses */ +static void sh_vou_reg_a_write(struct sh_vou_device *vou_dev, unsigned int reg, + u32 value) +{ + __raw_writel(value, vou_dev->base + reg); +} + +static void sh_vou_reg_ab_write(struct sh_vou_device *vou_dev, unsigned int reg, + u32 value) +{ + __raw_writel(value, vou_dev->base + reg); + __raw_writel(value, vou_dev->base + reg + 0x1000); +} + +static void sh_vou_reg_m_write(struct sh_vou_device *vou_dev, unsigned int reg, + u32 value) +{ + __raw_writel(value, vou_dev->base + reg + 0x2000); +} + +static u32 sh_vou_reg_a_read(struct sh_vou_device *vou_dev, unsigned int reg) +{ + return __raw_readl(vou_dev->base + reg); +} + +static void sh_vou_reg_a_set(struct sh_vou_device *vou_dev, unsigned int reg, + u32 value, u32 mask) +{ + u32 old = __raw_readl(vou_dev->base + reg); + + value = (value & mask) | (old & ~mask); + __raw_writel(value, vou_dev->base + reg); +} + +static void sh_vou_reg_b_set(struct sh_vou_device *vou_dev, unsigned int reg, + u32 value, u32 mask) +{ + sh_vou_reg_a_set(vou_dev, reg + 0x1000, value, mask); +} + +static void sh_vou_reg_ab_set(struct sh_vou_device *vou_dev, unsigned int reg, + u32 value, u32 mask) +{ + sh_vou_reg_a_set(vou_dev, reg, value, mask); + sh_vou_reg_b_set(vou_dev, reg, value, mask); +} + +struct sh_vou_fmt { + u32 pfmt; + unsigned char bpp; + unsigned char bpl; + unsigned char rgb; + unsigned char yf; + unsigned char pkf; +}; + +/* Further pixel formats can be added */ +static struct sh_vou_fmt vou_fmt[] = { + { + .pfmt = V4L2_PIX_FMT_NV12, + .bpp = 12, + .bpl = 1, + .yf = 0, + .rgb = 0, + }, + { + .pfmt = V4L2_PIX_FMT_NV16, + .bpp = 16, + .bpl = 1, + .yf = 1, + .rgb = 0, + }, + { + .pfmt = V4L2_PIX_FMT_RGB24, + .bpp = 24, + .bpl = 3, + .pkf = 2, + .rgb = 1, + }, + { + .pfmt = V4L2_PIX_FMT_RGB565, + .bpp = 16, + .bpl = 2, + .pkf = 3, + .rgb = 1, + }, + { + .pfmt = V4L2_PIX_FMT_RGB565X, + .bpp = 16, + .bpl = 2, + .pkf = 3, + .rgb = 1, + }, +}; + +static void sh_vou_schedule_next(struct sh_vou_device *vou_dev, + struct vb2_v4l2_buffer *vbuf) +{ + dma_addr_t addr1, addr2; + + addr1 = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0); + switch (vou_dev->pix.pixelformat) { + case V4L2_PIX_FMT_NV12: + case V4L2_PIX_FMT_NV16: + addr2 = addr1 + vou_dev->pix.width * vou_dev->pix.height; + break; + default: + addr2 = 0; + } + + sh_vou_reg_m_write(vou_dev, VOUAD1R, addr1); + sh_vou_reg_m_write(vou_dev, VOUAD2R, addr2); +} + +static void sh_vou_stream_config(struct sh_vou_device *vou_dev) +{ + unsigned int row_coeff; +#ifdef __LITTLE_ENDIAN + u32 dataswap = 7; +#else + u32 dataswap = 0; +#endif + + switch (vou_dev->pix.pixelformat) { + default: + case V4L2_PIX_FMT_NV12: + case V4L2_PIX_FMT_NV16: + row_coeff = 1; + break; + case V4L2_PIX_FMT_RGB565: + dataswap ^= 1; + fallthrough; + case V4L2_PIX_FMT_RGB565X: + row_coeff = 2; + break; + case V4L2_PIX_FMT_RGB24: + row_coeff = 3; + break; + } + + sh_vou_reg_a_write(vou_dev, VOUSWR, dataswap); + sh_vou_reg_ab_write(vou_dev, VOUAIR, vou_dev->pix.width * row_coeff); +} + +/* Locking: caller holds fop_lock mutex */ +static int sh_vou_queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], struct device *alloc_devs[]) +{ + struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq); + struct v4l2_pix_format *pix = &vou_dev->pix; + int bytes_per_line = vou_fmt[vou_dev->pix_idx].bpp * pix->width / 8; + + dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__); + + if (*nplanes) + return sizes[0] < pix->height * bytes_per_line ? -EINVAL : 0; + *nplanes = 1; + sizes[0] = pix->height * bytes_per_line; + return 0; +} + +static int sh_vou_buf_prepare(struct vb2_buffer *vb) +{ + struct sh_vou_device *vou_dev = vb2_get_drv_priv(vb->vb2_queue); + struct v4l2_pix_format *pix = &vou_dev->pix; + unsigned bytes_per_line = vou_fmt[vou_dev->pix_idx].bpp * pix->width / 8; + unsigned size = pix->height * bytes_per_line; + + dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__); + + if (vb2_plane_size(vb, 0) < size) { + /* User buffer too small */ + dev_warn(vou_dev->v4l2_dev.dev, "buffer too small (%lu < %u)\n", + vb2_plane_size(vb, 0), size); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, size); + return 0; +} + +/* Locking: caller holds fop_lock mutex and vq->irqlock spinlock */ +static void sh_vou_buf_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct sh_vou_device *vou_dev = vb2_get_drv_priv(vb->vb2_queue); + struct sh_vou_buffer *shbuf = to_sh_vou_buffer(vbuf); + unsigned long flags; + + spin_lock_irqsave(&vou_dev->lock, flags); + list_add_tail(&shbuf->list, &vou_dev->buf_list); + spin_unlock_irqrestore(&vou_dev->lock, flags); +} + +static int sh_vou_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq); + struct sh_vou_buffer *buf, *node; + int ret; + + vou_dev->sequence = 0; + ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, + video, s_stream, 1); + if (ret < 0 && ret != -ENOIOCTLCMD) { + list_for_each_entry_safe(buf, node, &vou_dev->buf_list, list) { + vb2_buffer_done(&buf->vb.vb2_buf, + VB2_BUF_STATE_QUEUED); + list_del(&buf->list); + } + vou_dev->active = NULL; + return ret; + } + + buf = list_entry(vou_dev->buf_list.next, struct sh_vou_buffer, list); + + vou_dev->active = buf; + + /* Start from side A: we use mirror addresses, so, set B */ + sh_vou_reg_a_write(vou_dev, VOURPR, 1); + dev_dbg(vou_dev->v4l2_dev.dev, "%s: first buffer status 0x%x\n", + __func__, sh_vou_reg_a_read(vou_dev, VOUSTR)); + sh_vou_schedule_next(vou_dev, &buf->vb); + + buf = list_entry(buf->list.next, struct sh_vou_buffer, list); + + /* Second buffer - initialise register side B */ + sh_vou_reg_a_write(vou_dev, VOURPR, 0); + sh_vou_schedule_next(vou_dev, &buf->vb); + + /* Register side switching with frame VSYNC */ + sh_vou_reg_a_write(vou_dev, VOURCR, 5); + + sh_vou_stream_config(vou_dev); + /* Enable End-of-Frame (VSYNC) interrupts */ + sh_vou_reg_a_write(vou_dev, VOUIR, 0x10004); + + /* Two buffers on the queue - activate the hardware */ + vou_dev->status = SH_VOU_RUNNING; + sh_vou_reg_a_write(vou_dev, VOUER, 0x107); + return 0; +} + +static void sh_vou_stop_streaming(struct vb2_queue *vq) +{ + struct sh_vou_device *vou_dev = vb2_get_drv_priv(vq); + struct sh_vou_buffer *buf, *node; + unsigned long flags; + + v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, + video, s_stream, 0); + /* disable output */ + sh_vou_reg_a_set(vou_dev, VOUER, 0, 1); + /* ...but the current frame will complete */ + sh_vou_reg_a_set(vou_dev, VOUIR, 0, 0x30000); + msleep(50); + spin_lock_irqsave(&vou_dev->lock, flags); + list_for_each_entry_safe(buf, node, &vou_dev->buf_list, list) { + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + list_del(&buf->list); + } + vou_dev->active = NULL; + spin_unlock_irqrestore(&vou_dev->lock, flags); +} + +static const struct vb2_ops sh_vou_qops = { + .queue_setup = sh_vou_queue_setup, + .buf_prepare = sh_vou_buf_prepare, + .buf_queue = sh_vou_buf_queue, + .start_streaming = sh_vou_start_streaming, + .stop_streaming = sh_vou_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +/* Video IOCTLs */ +static int sh_vou_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + + dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__); + + strscpy(cap->card, "SuperH VOU", sizeof(cap->card)); + strscpy(cap->driver, "sh-vou", sizeof(cap->driver)); + strscpy(cap->bus_info, "platform:sh-vou", sizeof(cap->bus_info)); + return 0; +} + +/* Enumerate formats, that the device can accept from the user */ +static int sh_vou_enum_fmt_vid_out(struct file *file, void *priv, + struct v4l2_fmtdesc *fmt) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + + if (fmt->index >= ARRAY_SIZE(vou_fmt)) + return -EINVAL; + + dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__); + + fmt->pixelformat = vou_fmt[fmt->index].pfmt; + + return 0; +} + +static int sh_vou_g_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + + dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__); + + fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + fmt->fmt.pix = vou_dev->pix; + + return 0; +} + +static const unsigned char vou_scale_h_num[] = {1, 9, 2, 9, 4}; +static const unsigned char vou_scale_h_den[] = {1, 8, 1, 4, 1}; +static const unsigned char vou_scale_h_fld[] = {0, 2, 1, 3}; +static const unsigned char vou_scale_v_num[] = {1, 2, 4}; +static const unsigned char vou_scale_v_den[] = {1, 1, 1}; +static const unsigned char vou_scale_v_fld[] = {0, 1}; + +static void sh_vou_configure_geometry(struct sh_vou_device *vou_dev, + int pix_idx, int w_idx, int h_idx) +{ + struct sh_vou_fmt *fmt = vou_fmt + pix_idx; + unsigned int black_left, black_top, width_max, + frame_in_height, frame_out_height, frame_out_top; + struct v4l2_rect *rect = &vou_dev->rect; + struct v4l2_pix_format *pix = &vou_dev->pix; + u32 vouvcr = 0, dsr_h, dsr_v; + + if (vou_dev->std & V4L2_STD_525_60) { + width_max = 858; + /* height_max = 262; */ + } else { + width_max = 864; + /* height_max = 312; */ + } + + frame_in_height = pix->height / 2; + frame_out_height = rect->height / 2; + frame_out_top = rect->top / 2; + + /* + * Cropping scheme: max useful image is 720x480, and the total video + * area is 858x525 (NTSC) or 864x625 (PAL). AK8813 / 8814 starts + * sampling data beginning with fixed 276th (NTSC) / 288th (PAL) clock, + * of which the first 33 / 25 clocks HSYNC must be held active. This + * has to be configured in CR[HW]. 1 pixel equals 2 clock periods. + * This gives CR[HW] = 16 / 12, VPR[HVP] = 138 / 144, which gives + * exactly 858 - 138 = 864 - 144 = 720! We call the out-of-display area, + * beyond DSR, specified on the left and top by the VPR register "black + * pixels" and out-of-image area (DPR) "background pixels." We fix VPR + * at 138 / 144 : 20, because that's the HSYNC timing, that our first + * client requires, and that's exactly what leaves us 720 pixels for the + * image; we leave VPR[VVP] at default 20 for now, because the client + * doesn't seem to have any special requirements for it. Otherwise we + * could also set it to max - 240 = 22 / 72. Thus VPR depends only on + * the selected standard, and DPR and DSR are selected according to + * cropping. Q: how does the client detect the first valid line? Does + * HSYNC stay inactive during invalid (black) lines? + */ + black_left = width_max - VOU_MAX_IMAGE_WIDTH; + black_top = 20; + + dsr_h = rect->width + rect->left; + dsr_v = frame_out_height + frame_out_top; + + dev_dbg(vou_dev->v4l2_dev.dev, + "image %ux%u, black %u:%u, offset %u:%u, display %ux%u\n", + pix->width, frame_in_height, black_left, black_top, + rect->left, frame_out_top, dsr_h, dsr_v); + + /* VOUISR height - half of a frame height in frame mode */ + sh_vou_reg_ab_write(vou_dev, VOUISR, (pix->width << 16) | frame_in_height); + sh_vou_reg_ab_write(vou_dev, VOUVPR, (black_left << 16) | black_top); + sh_vou_reg_ab_write(vou_dev, VOUDPR, (rect->left << 16) | frame_out_top); + sh_vou_reg_ab_write(vou_dev, VOUDSR, (dsr_h << 16) | dsr_v); + + /* + * if necessary, we could set VOUHIR to + * max(black_left + dsr_h, width_max) here + */ + + if (w_idx) + vouvcr |= (1 << 15) | (vou_scale_h_fld[w_idx - 1] << 4); + if (h_idx) + vouvcr |= (1 << 14) | vou_scale_v_fld[h_idx - 1]; + + dev_dbg(vou_dev->v4l2_dev.dev, "0x%08x: scaling 0x%x\n", + fmt->pfmt, vouvcr); + + /* To produce a colour bar for testing set bit 23 of VOUVCR */ + sh_vou_reg_ab_write(vou_dev, VOUVCR, vouvcr); + sh_vou_reg_ab_write(vou_dev, VOUDFR, + fmt->pkf | (fmt->yf << 8) | (fmt->rgb << 16)); +} + +struct sh_vou_geometry { + struct v4l2_rect output; + unsigned int in_width; + unsigned int in_height; + int scale_idx_h; + int scale_idx_v; +}; + +/* + * Find input geometry, that we can use to produce output, closest to the + * requested rectangle, using VOU scaling + */ +static void vou_adjust_input(struct sh_vou_geometry *geo, v4l2_std_id std) +{ + /* The compiler cannot know, that best and idx will indeed be set */ + unsigned int best_err = UINT_MAX, best = 0, img_height_max; + int i, idx = 0; + + if (std & V4L2_STD_525_60) + img_height_max = 480; + else + img_height_max = 576; + + /* Image width must be a multiple of 4 */ + v4l_bound_align_image(&geo->in_width, + VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 2, + &geo->in_height, + VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0); + + /* Select scales to come as close as possible to the output image */ + for (i = ARRAY_SIZE(vou_scale_h_num) - 1; i >= 0; i--) { + unsigned int err; + unsigned int found = geo->output.width * vou_scale_h_den[i] / + vou_scale_h_num[i]; + + if (found > VOU_MAX_IMAGE_WIDTH) + /* scales increase */ + break; + + err = abs(found - geo->in_width); + if (err < best_err) { + best_err = err; + idx = i; + best = found; + } + if (!err) + break; + } + + geo->in_width = best; + geo->scale_idx_h = idx; + + best_err = UINT_MAX; + + /* This loop can be replaced with one division */ + for (i = ARRAY_SIZE(vou_scale_v_num) - 1; i >= 0; i--) { + unsigned int err; + unsigned int found = geo->output.height * vou_scale_v_den[i] / + vou_scale_v_num[i]; + + if (found > img_height_max) + /* scales increase */ + break; + + err = abs(found - geo->in_height); + if (err < best_err) { + best_err = err; + idx = i; + best = found; + } + if (!err) + break; + } + + geo->in_height = best; + geo->scale_idx_v = idx; +} + +/* + * Find output geometry, that we can produce, using VOU scaling, closest to + * the requested rectangle + */ +static void vou_adjust_output(struct sh_vou_geometry *geo, v4l2_std_id std) +{ + unsigned int best_err = UINT_MAX, best = geo->in_width, + width_max, height_max, img_height_max; + int i, idx_h = 0, idx_v = 0; + + if (std & V4L2_STD_525_60) { + width_max = 858; + height_max = 262 * 2; + img_height_max = 480; + } else { + width_max = 864; + height_max = 312 * 2; + img_height_max = 576; + } + + /* Select scales to come as close as possible to the output image */ + for (i = 0; i < ARRAY_SIZE(vou_scale_h_num); i++) { + unsigned int err; + unsigned int found = geo->in_width * vou_scale_h_num[i] / + vou_scale_h_den[i]; + + if (found > VOU_MAX_IMAGE_WIDTH) + /* scales increase */ + break; + + err = abs(found - geo->output.width); + if (err < best_err) { + best_err = err; + idx_h = i; + best = found; + } + if (!err) + break; + } + + geo->output.width = best; + geo->scale_idx_h = idx_h; + if (geo->output.left + best > width_max) + geo->output.left = width_max - best; + + pr_debug("%s(): W %u * %u/%u = %u\n", __func__, geo->in_width, + vou_scale_h_num[idx_h], vou_scale_h_den[idx_h], best); + + best_err = UINT_MAX; + + /* This loop can be replaced with one division */ + for (i = 0; i < ARRAY_SIZE(vou_scale_v_num); i++) { + unsigned int err; + unsigned int found = geo->in_height * vou_scale_v_num[i] / + vou_scale_v_den[i]; + + if (found > img_height_max) + /* scales increase */ + break; + + err = abs(found - geo->output.height); + if (err < best_err) { + best_err = err; + idx_v = i; + best = found; + } + if (!err) + break; + } + + geo->output.height = best; + geo->scale_idx_v = idx_v; + if (geo->output.top + best > height_max) + geo->output.top = height_max - best; + + pr_debug("%s(): H %u * %u/%u = %u\n", __func__, geo->in_height, + vou_scale_v_num[idx_v], vou_scale_v_den[idx_v], best); +} + +static int sh_vou_try_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + struct v4l2_pix_format *pix = &fmt->fmt.pix; + unsigned int img_height_max; + int pix_idx; + + dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__); + + pix->field = V4L2_FIELD_INTERLACED; + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + pix->ycbcr_enc = pix->quantization = 0; + + for (pix_idx = 0; pix_idx < ARRAY_SIZE(vou_fmt); pix_idx++) + if (vou_fmt[pix_idx].pfmt == pix->pixelformat) + break; + + if (pix_idx == ARRAY_SIZE(vou_fmt)) + return -EINVAL; + + if (vou_dev->std & V4L2_STD_525_60) + img_height_max = 480; + else + img_height_max = 576; + + v4l_bound_align_image(&pix->width, + VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 2, + &pix->height, + VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0); + pix->bytesperline = pix->width * vou_fmt[pix_idx].bpl; + pix->sizeimage = pix->height * ((pix->width * vou_fmt[pix_idx].bpp) >> 3); + + return 0; +} + +static int sh_vou_set_fmt_vid_out(struct sh_vou_device *vou_dev, + struct v4l2_pix_format *pix) +{ + unsigned int img_height_max; + struct sh_vou_geometry geo; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + /* Revisit: is this the correct code? */ + .format.code = MEDIA_BUS_FMT_YUYV8_2X8, + .format.field = V4L2_FIELD_INTERLACED, + .format.colorspace = V4L2_COLORSPACE_SMPTE170M, + }; + struct v4l2_mbus_framefmt *mbfmt = &format.format; + int pix_idx; + int ret; + + if (vb2_is_busy(&vou_dev->queue)) + return -EBUSY; + + for (pix_idx = 0; pix_idx < ARRAY_SIZE(vou_fmt); pix_idx++) + if (vou_fmt[pix_idx].pfmt == pix->pixelformat) + break; + + geo.in_width = pix->width; + geo.in_height = pix->height; + geo.output = vou_dev->rect; + + vou_adjust_output(&geo, vou_dev->std); + + mbfmt->width = geo.output.width; + mbfmt->height = geo.output.height; + ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad, + set_fmt, NULL, &format); + /* Must be implemented, so, don't check for -ENOIOCTLCMD */ + if (ret < 0) + return ret; + + dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u -> %ux%u\n", __func__, + geo.output.width, geo.output.height, mbfmt->width, mbfmt->height); + + if (vou_dev->std & V4L2_STD_525_60) + img_height_max = 480; + else + img_height_max = 576; + + /* Sanity checks */ + if ((unsigned)mbfmt->width > VOU_MAX_IMAGE_WIDTH || + (unsigned)mbfmt->height > img_height_max || + mbfmt->code != MEDIA_BUS_FMT_YUYV8_2X8) + return -EIO; + + if (mbfmt->width != geo.output.width || + mbfmt->height != geo.output.height) { + geo.output.width = mbfmt->width; + geo.output.height = mbfmt->height; + + vou_adjust_input(&geo, vou_dev->std); + } + + /* We tried to preserve output rectangle, but it could have changed */ + vou_dev->rect = geo.output; + pix->width = geo.in_width; + pix->height = geo.in_height; + + dev_dbg(vou_dev->v4l2_dev.dev, "%s(): %ux%u\n", __func__, + pix->width, pix->height); + + vou_dev->pix_idx = pix_idx; + + vou_dev->pix = *pix; + + sh_vou_configure_geometry(vou_dev, pix_idx, + geo.scale_idx_h, geo.scale_idx_v); + + return 0; +} + +static int sh_vou_s_fmt_vid_out(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + int ret = sh_vou_try_fmt_vid_out(file, priv, fmt); + + if (ret) + return ret; + return sh_vou_set_fmt_vid_out(vou_dev, &fmt->fmt.pix); +} + +static int sh_vou_enum_output(struct file *file, void *fh, + struct v4l2_output *a) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + + if (a->index) + return -EINVAL; + strscpy(a->name, "Video Out", sizeof(a->name)); + a->type = V4L2_OUTPUT_TYPE_ANALOG; + a->std = vou_dev->vdev.tvnorms; + return 0; +} + +static int sh_vou_g_output(struct file *file, void *fh, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int sh_vou_s_output(struct file *file, void *fh, unsigned int i) +{ + return i ? -EINVAL : 0; +} + +static u32 sh_vou_ntsc_mode(enum sh_vou_bus_fmt bus_fmt) +{ + switch (bus_fmt) { + default: + pr_warn("%s(): Invalid bus-format code %d, using default 8-bit\n", + __func__, bus_fmt); + fallthrough; + case SH_VOU_BUS_8BIT: + return 1; + case SH_VOU_BUS_16BIT: + return 0; + case SH_VOU_BUS_BT656: + return 3; + } +} + +static int sh_vou_s_std(struct file *file, void *priv, v4l2_std_id std_id) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + int ret; + + dev_dbg(vou_dev->v4l2_dev.dev, "%s(): 0x%llx\n", __func__, std_id); + + if (std_id == vou_dev->std) + return 0; + + if (vb2_is_busy(&vou_dev->queue)) + return -EBUSY; + + ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, video, + s_std_output, std_id); + /* Shall we continue, if the subdev doesn't support .s_std_output()? */ + if (ret < 0 && ret != -ENOIOCTLCMD) + return ret; + + vou_dev->rect.top = vou_dev->rect.left = 0; + vou_dev->rect.width = VOU_MAX_IMAGE_WIDTH; + if (std_id & V4L2_STD_525_60) { + sh_vou_reg_ab_set(vou_dev, VOUCR, + sh_vou_ntsc_mode(vou_dev->pdata->bus_fmt) << 29, 7 << 29); + vou_dev->rect.height = 480; + } else { + sh_vou_reg_ab_set(vou_dev, VOUCR, 5 << 29, 7 << 29); + vou_dev->rect.height = 576; + } + + vou_dev->pix.width = vou_dev->rect.width; + vou_dev->pix.height = vou_dev->rect.height; + vou_dev->pix.bytesperline = + vou_dev->pix.width * vou_fmt[vou_dev->pix_idx].bpl; + vou_dev->pix.sizeimage = vou_dev->pix.height * + ((vou_dev->pix.width * vou_fmt[vou_dev->pix_idx].bpp) >> 3); + vou_dev->std = std_id; + sh_vou_set_fmt_vid_out(vou_dev, &vou_dev->pix); + + return 0; +} + +static int sh_vou_g_std(struct file *file, void *priv, v4l2_std_id *std) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + + dev_dbg(vou_dev->v4l2_dev.dev, "%s()\n", __func__); + + *std = vou_dev->std; + + return 0; +} + +static int sh_vou_log_status(struct file *file, void *priv) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + + pr_info("VOUER: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUER)); + pr_info("VOUCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUCR)); + pr_info("VOUSTR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSTR)); + pr_info("VOUVCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUVCR)); + pr_info("VOUISR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUISR)); + pr_info("VOUBCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUBCR)); + pr_info("VOUDPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDPR)); + pr_info("VOUDSR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDSR)); + pr_info("VOUVPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUVPR)); + pr_info("VOUIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUIR)); + pr_info("VOUSRR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSRR)); + pr_info("VOUMSR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUMSR)); + pr_info("VOUHIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUHIR)); + pr_info("VOUDFR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUDFR)); + pr_info("VOUAD1R: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAD1R)); + pr_info("VOUAD2R: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAD2R)); + pr_info("VOUAIR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUAIR)); + pr_info("VOUSWR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOUSWR)); + pr_info("VOURCR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOURCR)); + pr_info("VOURPR: 0x%08x\n", sh_vou_reg_a_read(vou_dev, VOURPR)); + return 0; +} + +static int sh_vou_g_selection(struct file *file, void *fh, + struct v4l2_selection *sel) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + + if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) + return -EINVAL; + switch (sel->target) { + case V4L2_SEL_TGT_COMPOSE: + sel->r = vou_dev->rect; + break; + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = VOU_MAX_IMAGE_WIDTH; + if (vou_dev->std & V4L2_STD_525_60) + sel->r.height = 480; + else + sel->r.height = 576; + break; + default: + return -EINVAL; + } + return 0; +} + +/* Assume a dull encoder, do all the work ourselves. */ +static int sh_vou_s_selection(struct file *file, void *fh, + struct v4l2_selection *sel) +{ + struct v4l2_rect *rect = &sel->r; + struct sh_vou_device *vou_dev = video_drvdata(file); + struct v4l2_subdev_selection sd_sel = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + .target = V4L2_SEL_TGT_COMPOSE, + }; + struct v4l2_pix_format *pix = &vou_dev->pix; + struct sh_vou_geometry geo; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + /* Revisit: is this the correct code? */ + .format.code = MEDIA_BUS_FMT_YUYV8_2X8, + .format.field = V4L2_FIELD_INTERLACED, + .format.colorspace = V4L2_COLORSPACE_SMPTE170M, + }; + unsigned int img_height_max; + int ret; + + if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT || + sel->target != V4L2_SEL_TGT_COMPOSE) + return -EINVAL; + + if (vb2_is_busy(&vou_dev->queue)) + return -EBUSY; + + if (vou_dev->std & V4L2_STD_525_60) + img_height_max = 480; + else + img_height_max = 576; + + v4l_bound_align_image(&rect->width, + VOU_MIN_IMAGE_WIDTH, VOU_MAX_IMAGE_WIDTH, 1, + &rect->height, + VOU_MIN_IMAGE_HEIGHT, img_height_max, 1, 0); + + if (rect->width + rect->left > VOU_MAX_IMAGE_WIDTH) + rect->left = VOU_MAX_IMAGE_WIDTH - rect->width; + + if (rect->height + rect->top > img_height_max) + rect->top = img_height_max - rect->height; + + geo.output = *rect; + geo.in_width = pix->width; + geo.in_height = pix->height; + + /* Configure the encoder one-to-one, position at 0, ignore errors */ + sd_sel.r.width = geo.output.width; + sd_sel.r.height = geo.output.height; + /* + * We first issue a S_SELECTION, so that the subsequent S_FMT delivers the + * final encoder configuration. + */ + v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad, + set_selection, NULL, &sd_sel); + format.format.width = geo.output.width; + format.format.height = geo.output.height; + ret = v4l2_device_call_until_err(&vou_dev->v4l2_dev, 0, pad, + set_fmt, NULL, &format); + /* Must be implemented, so, don't check for -ENOIOCTLCMD */ + if (ret < 0) + return ret; + + /* Sanity checks */ + if ((unsigned)format.format.width > VOU_MAX_IMAGE_WIDTH || + (unsigned)format.format.height > img_height_max || + format.format.code != MEDIA_BUS_FMT_YUYV8_2X8) + return -EIO; + + geo.output.width = format.format.width; + geo.output.height = format.format.height; + + /* + * No down-scaling. According to the API, current call has precedence: + * https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/crop.html#cropping-structures + */ + vou_adjust_input(&geo, vou_dev->std); + + /* We tried to preserve output rectangle, but it could have changed */ + vou_dev->rect = geo.output; + pix->width = geo.in_width; + pix->height = geo.in_height; + + sh_vou_configure_geometry(vou_dev, vou_dev->pix_idx, + geo.scale_idx_h, geo.scale_idx_v); + + return 0; +} + +static irqreturn_t sh_vou_isr(int irq, void *dev_id) +{ + struct sh_vou_device *vou_dev = dev_id; + static unsigned long j; + struct sh_vou_buffer *vb; + static int cnt; + u32 irq_status = sh_vou_reg_a_read(vou_dev, VOUIR), masked; + u32 vou_status = sh_vou_reg_a_read(vou_dev, VOUSTR); + + if (!(irq_status & 0x300)) { + if (printk_timed_ratelimit(&j, 500)) + dev_warn(vou_dev->v4l2_dev.dev, "IRQ status 0x%x!\n", + irq_status); + return IRQ_NONE; + } + + spin_lock(&vou_dev->lock); + if (!vou_dev->active || list_empty(&vou_dev->buf_list)) { + if (printk_timed_ratelimit(&j, 500)) + dev_warn(vou_dev->v4l2_dev.dev, + "IRQ without active buffer: %x!\n", irq_status); + /* Just ack: buf_release will disable further interrupts */ + sh_vou_reg_a_set(vou_dev, VOUIR, 0, 0x300); + spin_unlock(&vou_dev->lock); + return IRQ_HANDLED; + } + + masked = ~(0x300 & irq_status) & irq_status & 0x30304; + dev_dbg(vou_dev->v4l2_dev.dev, + "IRQ status 0x%x -> 0x%x, VOU status 0x%x, cnt %d\n", + irq_status, masked, vou_status, cnt); + + cnt++; + /* side = vou_status & 0x10000; */ + + /* Clear only set interrupts */ + sh_vou_reg_a_write(vou_dev, VOUIR, masked); + + vb = vou_dev->active; + if (list_is_singular(&vb->list)) { + /* Keep cycling while no next buffer is available */ + sh_vou_schedule_next(vou_dev, &vb->vb); + spin_unlock(&vou_dev->lock); + return IRQ_HANDLED; + } + + list_del(&vb->list); + + vb->vb.vb2_buf.timestamp = ktime_get_ns(); + vb->vb.sequence = vou_dev->sequence++; + vb->vb.field = V4L2_FIELD_INTERLACED; + vb2_buffer_done(&vb->vb.vb2_buf, VB2_BUF_STATE_DONE); + + vou_dev->active = list_entry(vou_dev->buf_list.next, + struct sh_vou_buffer, list); + + if (list_is_singular(&vou_dev->buf_list)) { + /* Keep cycling while no next buffer is available */ + sh_vou_schedule_next(vou_dev, &vou_dev->active->vb); + } else { + struct sh_vou_buffer *new = list_entry(vou_dev->active->list.next, + struct sh_vou_buffer, list); + sh_vou_schedule_next(vou_dev, &new->vb); + } + + spin_unlock(&vou_dev->lock); + + return IRQ_HANDLED; +} + +static int sh_vou_hw_init(struct sh_vou_device *vou_dev) +{ + struct sh_vou_pdata *pdata = vou_dev->pdata; + u32 voucr = sh_vou_ntsc_mode(pdata->bus_fmt) << 29; + int i = 100; + + /* Disable all IRQs */ + sh_vou_reg_a_write(vou_dev, VOUIR, 0); + + /* Reset VOU interfaces - registers unaffected */ + sh_vou_reg_a_write(vou_dev, VOUSRR, 0x101); + while (--i && (sh_vou_reg_a_read(vou_dev, VOUSRR) & 0x101)) + udelay(1); + + if (!i) + return -ETIMEDOUT; + + dev_dbg(vou_dev->v4l2_dev.dev, "Reset took %dus\n", 100 - i); + + if (pdata->flags & SH_VOU_PCLK_FALLING) + voucr |= 1 << 28; + if (pdata->flags & SH_VOU_HSYNC_LOW) + voucr |= 1 << 27; + if (pdata->flags & SH_VOU_VSYNC_LOW) + voucr |= 1 << 26; + sh_vou_reg_ab_set(vou_dev, VOUCR, voucr, 0xfc000000); + + /* Manual register side switching at first */ + sh_vou_reg_a_write(vou_dev, VOURCR, 4); + /* Default - fixed HSYNC length, can be made configurable is required */ + sh_vou_reg_ab_write(vou_dev, VOUMSR, 0x800000); + + sh_vou_set_fmt_vid_out(vou_dev, &vou_dev->pix); + + return 0; +} + +/* File operations */ +static int sh_vou_open(struct file *file) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + int err; + + if (mutex_lock_interruptible(&vou_dev->fop_lock)) + return -ERESTARTSYS; + + err = v4l2_fh_open(file); + if (err) + goto done_open; + if (v4l2_fh_is_singular_file(file) && + vou_dev->status == SH_VOU_INITIALISING) { + /* First open */ + err = pm_runtime_resume_and_get(vou_dev->v4l2_dev.dev); + if (err < 0) { + v4l2_fh_release(file); + goto done_open; + } + err = sh_vou_hw_init(vou_dev); + if (err < 0) { + pm_runtime_put(vou_dev->v4l2_dev.dev); + v4l2_fh_release(file); + } else { + vou_dev->status = SH_VOU_IDLE; + } + } +done_open: + mutex_unlock(&vou_dev->fop_lock); + return err; +} + +static int sh_vou_release(struct file *file) +{ + struct sh_vou_device *vou_dev = video_drvdata(file); + bool is_last; + + mutex_lock(&vou_dev->fop_lock); + is_last = v4l2_fh_is_singular_file(file); + _vb2_fop_release(file, NULL); + if (is_last) { + /* Last close */ + vou_dev->status = SH_VOU_INITIALISING; + sh_vou_reg_a_set(vou_dev, VOUER, 0, 0x101); + pm_runtime_put(vou_dev->v4l2_dev.dev); + } + mutex_unlock(&vou_dev->fop_lock); + return 0; +} + +/* sh_vou display ioctl operations */ +static const struct v4l2_ioctl_ops sh_vou_ioctl_ops = { + .vidioc_querycap = sh_vou_querycap, + .vidioc_enum_fmt_vid_out = sh_vou_enum_fmt_vid_out, + .vidioc_g_fmt_vid_out = sh_vou_g_fmt_vid_out, + .vidioc_s_fmt_vid_out = sh_vou_s_fmt_vid_out, + .vidioc_try_fmt_vid_out = sh_vou_try_fmt_vid_out, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_g_output = sh_vou_g_output, + .vidioc_s_output = sh_vou_s_output, + .vidioc_enum_output = sh_vou_enum_output, + .vidioc_s_std = sh_vou_s_std, + .vidioc_g_std = sh_vou_g_std, + .vidioc_g_selection = sh_vou_g_selection, + .vidioc_s_selection = sh_vou_s_selection, + .vidioc_log_status = sh_vou_log_status, +}; + +static const struct v4l2_file_operations sh_vou_fops = { + .owner = THIS_MODULE, + .open = sh_vou_open, + .release = sh_vou_release, + .unlocked_ioctl = video_ioctl2, + .mmap = vb2_fop_mmap, + .poll = vb2_fop_poll, + .write = vb2_fop_write, +}; + +static const struct video_device sh_vou_video_template = { + .name = "sh_vou", + .fops = &sh_vou_fops, + .ioctl_ops = &sh_vou_ioctl_ops, + .tvnorms = V4L2_STD_525_60, /* PAL only supported in 8-bit non-bt656 mode */ + .vfl_dir = VFL_DIR_TX, + .device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING, +}; + +static int sh_vou_probe(struct platform_device *pdev) +{ + struct sh_vou_pdata *vou_pdata = pdev->dev.platform_data; + struct v4l2_rect *rect; + struct v4l2_pix_format *pix; + struct i2c_adapter *i2c_adap; + struct video_device *vdev; + struct sh_vou_device *vou_dev; + struct resource *reg_res; + struct v4l2_subdev *subdev; + struct vb2_queue *q; + int irq, ret; + + reg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + + if (!vou_pdata || !reg_res || irq <= 0) { + dev_err(&pdev->dev, "Insufficient VOU platform information.\n"); + return -ENODEV; + } + + vou_dev = devm_kzalloc(&pdev->dev, sizeof(*vou_dev), GFP_KERNEL); + if (!vou_dev) + return -ENOMEM; + + INIT_LIST_HEAD(&vou_dev->buf_list); + spin_lock_init(&vou_dev->lock); + mutex_init(&vou_dev->fop_lock); + vou_dev->pdata = vou_pdata; + vou_dev->status = SH_VOU_INITIALISING; + vou_dev->pix_idx = 1; + + rect = &vou_dev->rect; + pix = &vou_dev->pix; + + /* Fill in defaults */ + vou_dev->std = V4L2_STD_NTSC_M; + rect->left = 0; + rect->top = 0; + rect->width = VOU_MAX_IMAGE_WIDTH; + rect->height = 480; + pix->width = VOU_MAX_IMAGE_WIDTH; + pix->height = 480; + pix->pixelformat = V4L2_PIX_FMT_NV16; + pix->field = V4L2_FIELD_INTERLACED; + pix->bytesperline = VOU_MAX_IMAGE_WIDTH; + pix->sizeimage = VOU_MAX_IMAGE_WIDTH * 2 * 480; + pix->colorspace = V4L2_COLORSPACE_SMPTE170M; + + vou_dev->base = devm_ioremap_resource(&pdev->dev, reg_res); + if (IS_ERR(vou_dev->base)) + return PTR_ERR(vou_dev->base); + + ret = devm_request_irq(&pdev->dev, irq, sh_vou_isr, 0, "vou", vou_dev); + if (ret < 0) + return ret; + + ret = v4l2_device_register(&pdev->dev, &vou_dev->v4l2_dev); + if (ret < 0) { + dev_err(&pdev->dev, "Error registering v4l2 device\n"); + return ret; + } + + vdev = &vou_dev->vdev; + *vdev = sh_vou_video_template; + if (vou_pdata->bus_fmt == SH_VOU_BUS_8BIT) + vdev->tvnorms |= V4L2_STD_PAL; + vdev->v4l2_dev = &vou_dev->v4l2_dev; + vdev->release = video_device_release_empty; + vdev->lock = &vou_dev->fop_lock; + + video_set_drvdata(vdev, vou_dev); + + /* Initialize the vb2 queue */ + q = &vou_dev->queue; + q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_WRITE; + q->drv_priv = vou_dev; + q->buf_struct_size = sizeof(struct sh_vou_buffer); + q->ops = &sh_vou_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->min_buffers_needed = 2; + q->lock = &vou_dev->fop_lock; + q->dev = &pdev->dev; + ret = vb2_queue_init(q); + if (ret) + goto ei2cgadap; + + vdev->queue = q; + INIT_LIST_HEAD(&vou_dev->buf_list); + + pm_runtime_enable(&pdev->dev); + pm_runtime_resume(&pdev->dev); + + i2c_adap = i2c_get_adapter(vou_pdata->i2c_adap); + if (!i2c_adap) { + ret = -ENODEV; + goto ei2cgadap; + } + + ret = sh_vou_hw_init(vou_dev); + if (ret < 0) + goto ereset; + + subdev = v4l2_i2c_new_subdev_board(&vou_dev->v4l2_dev, i2c_adap, + vou_pdata->board_info, NULL); + if (!subdev) { + ret = -ENOMEM; + goto ei2cnd; + } + + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); + if (ret < 0) + goto evregdev; + + return 0; + +evregdev: +ei2cnd: +ereset: + i2c_put_adapter(i2c_adap); +ei2cgadap: + pm_runtime_disable(&pdev->dev); + v4l2_device_unregister(&vou_dev->v4l2_dev); + return ret; +} + +static int sh_vou_remove(struct platform_device *pdev) +{ + struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); + struct sh_vou_device *vou_dev = container_of(v4l2_dev, + struct sh_vou_device, v4l2_dev); + struct v4l2_subdev *sd = list_entry(v4l2_dev->subdevs.next, + struct v4l2_subdev, list); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + pm_runtime_disable(&pdev->dev); + video_unregister_device(&vou_dev->vdev); + i2c_put_adapter(client->adapter); + v4l2_device_unregister(&vou_dev->v4l2_dev); + return 0; +} + +static struct platform_driver sh_vou = { + .remove = sh_vou_remove, + .driver = { + .name = "sh-vou", + }, +}; + +module_platform_driver_probe(sh_vou, sh_vou_probe); + +MODULE_DESCRIPTION("SuperH VOU driver"); +MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION("0.1.0"); +MODULE_ALIAS("platform:sh-vou"); diff --git a/drivers/media/platform/renesas/vsp1/Makefile b/drivers/media/platform/renesas/vsp1/Makefile new file mode 100644 index 000000000..4bb4dcbef --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +vsp1-y := vsp1_drv.o vsp1_entity.o vsp1_pipe.o +vsp1-y += vsp1_dl.o vsp1_drm.o vsp1_video.o +vsp1-y += vsp1_rpf.o vsp1_rwpf.o vsp1_wpf.o +vsp1-y += vsp1_clu.o vsp1_hsit.o vsp1_lut.o +vsp1-y += vsp1_brx.o vsp1_sru.o vsp1_uds.o +vsp1-y += vsp1_hgo.o vsp1_hgt.o vsp1_histo.o +vsp1-y += vsp1_lif.o vsp1_uif.o + +obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1.o diff --git a/drivers/media/platform/renesas/vsp1/vsp1.h b/drivers/media/platform/renesas/vsp1/vsp1.h new file mode 100644 index 000000000..2f6f0c6ae --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1.h @@ -0,0 +1,127 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1.h -- R-Car VSP1 Driver + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_H__ +#define __VSP1_H__ + +#include <linux/io.h> +#include <linux/list.h> +#include <linux/mutex.h> + +#include <media/media-device.h> +#include <media/v4l2-device.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_regs.h" + +struct clk; +struct device; +struct rcar_fcp_device; +struct reset_control; + +struct vsp1_drm; +struct vsp1_entity; +struct vsp1_platform_data; +struct vsp1_brx; +struct vsp1_clu; +struct vsp1_hgo; +struct vsp1_hgt; +struct vsp1_hsit; +struct vsp1_lif; +struct vsp1_lut; +struct vsp1_rwpf; +struct vsp1_sru; +struct vsp1_uds; +struct vsp1_uif; + +#define VSP1_MAX_LIF 2 +#define VSP1_MAX_RPF 5 +#define VSP1_MAX_UDS 3 +#define VSP1_MAX_UIF 2 +#define VSP1_MAX_WPF 4 + +#define VSP1_HAS_LUT BIT(1) +#define VSP1_HAS_SRU BIT(2) +#define VSP1_HAS_BRU BIT(3) +#define VSP1_HAS_CLU BIT(4) +#define VSP1_HAS_WPF_VFLIP BIT(5) +#define VSP1_HAS_WPF_HFLIP BIT(6) +#define VSP1_HAS_HGO BIT(7) +#define VSP1_HAS_HGT BIT(8) +#define VSP1_HAS_BRS BIT(9) +#define VSP1_HAS_EXT_DL BIT(10) +#define VSP1_HAS_NON_ZERO_LBA BIT(11) + +struct vsp1_device_info { + u32 version; + const char *model; + unsigned int gen; + unsigned int features; + unsigned int lif_count; + unsigned int rpf_count; + unsigned int uds_count; + unsigned int uif_count; + unsigned int wpf_count; + unsigned int num_bru_inputs; + u8 soc; + bool uapi; +}; + +#define vsp1_feature(vsp1, f) ((vsp1)->info->features & (f)) + +struct vsp1_device { + struct device *dev; + const struct vsp1_device_info *info; + u32 version; + + void __iomem *mmio; + struct rcar_fcp_device *fcp; + struct device *bus_master; + struct reset_control *rstc; + + struct vsp1_brx *brs; + struct vsp1_brx *bru; + struct vsp1_clu *clu; + struct vsp1_hgo *hgo; + struct vsp1_hgt *hgt; + struct vsp1_hsit *hsi; + struct vsp1_hsit *hst; + struct vsp1_lif *lif[VSP1_MAX_LIF]; + struct vsp1_lut *lut; + struct vsp1_rwpf *rpf[VSP1_MAX_RPF]; + struct vsp1_sru *sru; + struct vsp1_uds *uds[VSP1_MAX_UDS]; + struct vsp1_uif *uif[VSP1_MAX_UIF]; + struct vsp1_rwpf *wpf[VSP1_MAX_WPF]; + + struct list_head entities; + struct list_head videos; + + struct v4l2_device v4l2_dev; + struct media_device media_dev; + struct media_entity_operations media_ops; + + struct vsp1_drm *drm; +}; + +int vsp1_device_get(struct vsp1_device *vsp1); +void vsp1_device_put(struct vsp1_device *vsp1); + +int vsp1_reset_wpf(struct vsp1_device *vsp1, unsigned int index); + +static inline u32 vsp1_read(struct vsp1_device *vsp1, u32 reg) +{ + return ioread32(vsp1->mmio + reg); +} + +static inline void vsp1_write(struct vsp1_device *vsp1, u32 reg, u32 data) +{ + iowrite32(data, vsp1->mmio + reg); +} + +#endif /* __VSP1_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_brx.c b/drivers/media/platform/renesas/vsp1/vsp1_brx.c new file mode 100644 index 000000000..89385b4ca --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_brx.c @@ -0,0 +1,455 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_brx.c -- R-Car VSP1 Blend ROP Unit (BRU and BRS) + * + * Copyright (C) 2013 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_brx.h" +#include "vsp1_dl.h" +#include "vsp1_pipe.h" +#include "vsp1_rwpf.h" +#include "vsp1_video.h" + +#define BRX_MIN_SIZE 1U +#define BRX_MAX_SIZE 8190U + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline void vsp1_brx_write(struct vsp1_brx *brx, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, brx->base + reg, data); +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +static int brx_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct vsp1_brx *brx = + container_of(ctrl->handler, struct vsp1_brx, ctrls); + + switch (ctrl->id) { + case V4L2_CID_BG_COLOR: + brx->bgcolor = ctrl->val; + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops brx_ctrl_ops = { + .s_ctrl = brx_s_ctrl, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +/* + * The BRx can't perform format conversion, all sink and source formats must be + * identical. We pick the format on the first sink pad (pad 0) and propagate it + * to all other pads. + */ + +static int brx_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + static const unsigned int codes[] = { + MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AYUV8_1X32, + }; + + return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, codes, + ARRAY_SIZE(codes)); +} + +static int brx_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->index) + return -EINVAL; + + if (fse->code != MEDIA_BUS_FMT_ARGB8888_1X32 && + fse->code != MEDIA_BUS_FMT_AYUV8_1X32) + return -EINVAL; + + fse->min_width = BRX_MIN_SIZE; + fse->max_width = BRX_MAX_SIZE; + fse->min_height = BRX_MIN_SIZE; + fse->max_height = BRX_MAX_SIZE; + + return 0; +} + +static struct v4l2_rect *brx_get_compose(struct vsp1_brx *brx, + struct v4l2_subdev_state *sd_state, + unsigned int pad) +{ + return v4l2_subdev_get_try_compose(&brx->entity.subdev, sd_state, pad); +} + +static void brx_try_format(struct vsp1_brx *brx, + struct v4l2_subdev_state *sd_state, + unsigned int pad, struct v4l2_mbus_framefmt *fmt) +{ + struct v4l2_mbus_framefmt *format; + + switch (pad) { + case BRX_PAD_SINK(0): + /* Default to YUV if the requested format is not supported. */ + if (fmt->code != MEDIA_BUS_FMT_ARGB8888_1X32 && + fmt->code != MEDIA_BUS_FMT_AYUV8_1X32) + fmt->code = MEDIA_BUS_FMT_AYUV8_1X32; + break; + + default: + /* The BRx can't perform format conversion. */ + format = vsp1_entity_get_pad_format(&brx->entity, sd_state, + BRX_PAD_SINK(0)); + fmt->code = format->code; + break; + } + + fmt->width = clamp(fmt->width, BRX_MIN_SIZE, BRX_MAX_SIZE); + fmt->height = clamp(fmt->height, BRX_MIN_SIZE, BRX_MAX_SIZE); + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_SRGB; +} + +static int brx_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct vsp1_brx *brx = to_brx(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + int ret = 0; + + mutex_lock(&brx->entity.lock); + + config = vsp1_entity_get_pad_config(&brx->entity, sd_state, + fmt->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + brx_try_format(brx, config, fmt->pad, &fmt->format); + + format = vsp1_entity_get_pad_format(&brx->entity, config, fmt->pad); + *format = fmt->format; + + /* Reset the compose rectangle. */ + if (fmt->pad != brx->entity.source_pad) { + struct v4l2_rect *compose; + + compose = brx_get_compose(brx, config, fmt->pad); + compose->left = 0; + compose->top = 0; + compose->width = format->width; + compose->height = format->height; + } + + /* Propagate the format code to all pads. */ + if (fmt->pad == BRX_PAD_SINK(0)) { + unsigned int i; + + for (i = 0; i <= brx->entity.source_pad; ++i) { + format = vsp1_entity_get_pad_format(&brx->entity, + config, i); + format->code = fmt->format.code; + } + } + +done: + mutex_unlock(&brx->entity.lock); + return ret; +} + +static int brx_get_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_brx *brx = to_brx(subdev); + struct v4l2_subdev_state *config; + + if (sel->pad == brx->entity.source_pad) + return -EINVAL; + + switch (sel->target) { + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = BRX_MAX_SIZE; + sel->r.height = BRX_MAX_SIZE; + return 0; + + case V4L2_SEL_TGT_COMPOSE: + config = vsp1_entity_get_pad_config(&brx->entity, sd_state, + sel->which); + if (!config) + return -EINVAL; + + mutex_lock(&brx->entity.lock); + sel->r = *brx_get_compose(brx, config, sel->pad); + mutex_unlock(&brx->entity.lock); + return 0; + + default: + return -EINVAL; + } +} + +static int brx_set_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_brx *brx = to_brx(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *compose; + int ret = 0; + + if (sel->pad == brx->entity.source_pad) + return -EINVAL; + + if (sel->target != V4L2_SEL_TGT_COMPOSE) + return -EINVAL; + + mutex_lock(&brx->entity.lock); + + config = vsp1_entity_get_pad_config(&brx->entity, sd_state, + sel->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + /* + * The compose rectangle top left corner must be inside the output + * frame. + */ + format = vsp1_entity_get_pad_format(&brx->entity, config, + brx->entity.source_pad); + sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1); + sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1); + + /* + * Scaling isn't supported, the compose rectangle size must be identical + * to the sink format size. + */ + format = vsp1_entity_get_pad_format(&brx->entity, config, sel->pad); + sel->r.width = format->width; + sel->r.height = format->height; + + compose = brx_get_compose(brx, config, sel->pad); + *compose = sel->r; + +done: + mutex_unlock(&brx->entity.lock); + return ret; +} + +static const struct v4l2_subdev_pad_ops brx_pad_ops = { + .init_cfg = vsp1_entity_init_cfg, + .enum_mbus_code = brx_enum_mbus_code, + .enum_frame_size = brx_enum_frame_size, + .get_fmt = vsp1_subdev_get_pad_format, + .set_fmt = brx_set_format, + .get_selection = brx_get_selection, + .set_selection = brx_set_selection, +}; + +static const struct v4l2_subdev_ops brx_ops = { + .pad = &brx_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void brx_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_brx *brx = to_brx(&entity->subdev); + struct v4l2_mbus_framefmt *format; + unsigned int flags; + unsigned int i; + + format = vsp1_entity_get_pad_format(&brx->entity, brx->entity.config, + brx->entity.source_pad); + + /* + * The hardware is extremely flexible but we have no userspace API to + * expose all the parameters, nor is it clear whether we would have use + * cases for all the supported modes. Let's just hardcode the parameters + * to sane default values for now. + */ + + /* + * Disable dithering and enable color data normalization unless the + * format at the pipeline output is premultiplied. + */ + flags = pipe->output ? pipe->output->format.flags : 0; + vsp1_brx_write(brx, dlb, VI6_BRU_INCTRL, + flags & V4L2_PIX_FMT_FLAG_PREMUL_ALPHA ? + 0 : VI6_BRU_INCTRL_NRM); + + /* + * Set the background position to cover the whole output image and + * configure its color. + */ + vsp1_brx_write(brx, dlb, VI6_BRU_VIRRPF_SIZE, + (format->width << VI6_BRU_VIRRPF_SIZE_HSIZE_SHIFT) | + (format->height << VI6_BRU_VIRRPF_SIZE_VSIZE_SHIFT)); + vsp1_brx_write(brx, dlb, VI6_BRU_VIRRPF_LOC, 0); + + vsp1_brx_write(brx, dlb, VI6_BRU_VIRRPF_COL, brx->bgcolor | + (0xff << VI6_BRU_VIRRPF_COL_A_SHIFT)); + + /* + * Route BRU input 1 as SRC input to the ROP unit and configure the ROP + * unit with a NOP operation to make BRU input 1 available as the + * Blend/ROP unit B SRC input. Only needed for BRU, the BRS has no ROP + * unit. + */ + if (entity->type == VSP1_ENTITY_BRU) + vsp1_brx_write(brx, dlb, VI6_BRU_ROP, + VI6_BRU_ROP_DSTSEL_BRUIN(1) | + VI6_BRU_ROP_CROP(VI6_ROP_NOP) | + VI6_BRU_ROP_AROP(VI6_ROP_NOP)); + + for (i = 0; i < brx->entity.source_pad; ++i) { + bool premultiplied = false; + u32 ctrl = 0; + + /* + * Configure all Blend/ROP units corresponding to an enabled BRx + * input for alpha blending. Blend/ROP units corresponding to + * disabled BRx inputs are used in ROP NOP mode to ignore the + * SRC input. + */ + if (brx->inputs[i].rpf) { + ctrl |= VI6_BRU_CTRL_RBC; + + premultiplied = brx->inputs[i].rpf->format.flags + & V4L2_PIX_FMT_FLAG_PREMUL_ALPHA; + } else { + ctrl |= VI6_BRU_CTRL_CROP(VI6_ROP_NOP) + | VI6_BRU_CTRL_AROP(VI6_ROP_NOP); + } + + /* + * Select the virtual RPF as the Blend/ROP unit A DST input to + * serve as a background color. + */ + if (i == 0) + ctrl |= VI6_BRU_CTRL_DSTSEL_VRPF; + + /* + * Route inputs 0 to 3 as SRC inputs to Blend/ROP units A to D + * in that order. In the BRU the Blend/ROP unit B SRC is + * hardwired to the ROP unit output, the corresponding register + * bits must be set to 0. The BRS has no ROP unit and doesn't + * need any special processing. + */ + if (!(entity->type == VSP1_ENTITY_BRU && i == 1)) + ctrl |= VI6_BRU_CTRL_SRCSEL_BRUIN(i); + + vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl); + + /* + * Hardcode the blending formula to + * + * DSTc = DSTc * (1 - SRCa) + SRCc * SRCa + * DSTa = DSTa * (1 - SRCa) + SRCa + * + * when the SRC input isn't premultiplied, and to + * + * DSTc = DSTc * (1 - SRCa) + SRCc + * DSTa = DSTa * (1 - SRCa) + SRCa + * + * otherwise. + */ + vsp1_brx_write(brx, dlb, VI6_BRU_BLD(i), + VI6_BRU_BLD_CCMDX_255_SRC_A | + (premultiplied ? VI6_BRU_BLD_CCMDY_COEFY : + VI6_BRU_BLD_CCMDY_SRC_A) | + VI6_BRU_BLD_ACMDX_255_SRC_A | + VI6_BRU_BLD_ACMDY_COEFY | + (0xff << VI6_BRU_BLD_COEFY_SHIFT)); + } +} + +static const struct vsp1_entity_operations brx_entity_ops = { + .configure_stream = brx_configure_stream, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +struct vsp1_brx *vsp1_brx_create(struct vsp1_device *vsp1, + enum vsp1_entity_type type) +{ + struct vsp1_brx *brx; + unsigned int num_pads; + const char *name; + int ret; + + brx = devm_kzalloc(vsp1->dev, sizeof(*brx), GFP_KERNEL); + if (brx == NULL) + return ERR_PTR(-ENOMEM); + + brx->base = type == VSP1_ENTITY_BRU ? VI6_BRU_BASE : VI6_BRS_BASE; + brx->entity.ops = &brx_entity_ops; + brx->entity.type = type; + + if (type == VSP1_ENTITY_BRU) { + num_pads = vsp1->info->num_bru_inputs + 1; + name = "bru"; + } else { + num_pads = 3; + name = "brs"; + } + + ret = vsp1_entity_init(vsp1, &brx->entity, name, num_pads, &brx_ops, + MEDIA_ENT_F_PROC_VIDEO_COMPOSER); + if (ret < 0) + return ERR_PTR(ret); + + /* Initialize the control handler. */ + v4l2_ctrl_handler_init(&brx->ctrls, 1); + v4l2_ctrl_new_std(&brx->ctrls, &brx_ctrl_ops, V4L2_CID_BG_COLOR, + 0, 0xffffff, 1, 0); + + brx->bgcolor = 0; + + brx->entity.subdev.ctrl_handler = &brx->ctrls; + + if (brx->ctrls.error) { + dev_err(vsp1->dev, "%s: failed to initialize controls\n", name); + ret = brx->ctrls.error; + vsp1_entity_destroy(&brx->entity); + return ERR_PTR(ret); + } + + return brx; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_brx.h b/drivers/media/platform/renesas/vsp1/vsp1_brx.h new file mode 100644 index 000000000..6abbb8c33 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_brx.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_brx.h -- R-Car VSP1 Blend ROP Unit (BRU and BRS) + * + * Copyright (C) 2013 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_BRX_H__ +#define __VSP1_BRX_H__ + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_entity.h" + +struct vsp1_device; +struct vsp1_rwpf; + +#define BRX_PAD_SINK(n) (n) + +struct vsp1_brx { + struct vsp1_entity entity; + unsigned int base; + + struct v4l2_ctrl_handler ctrls; + + struct { + struct vsp1_rwpf *rpf; + } inputs[VSP1_MAX_RPF]; + + u32 bgcolor; +}; + +static inline struct vsp1_brx *to_brx(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_brx, entity.subdev); +} + +struct vsp1_brx *vsp1_brx_create(struct vsp1_device *vsp1, + enum vsp1_entity_type type); + +#endif /* __VSP1_BRX_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_clu.c b/drivers/media/platform/renesas/vsp1/vsp1_clu.c new file mode 100644 index 000000000..c5217fee2 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_clu.c @@ -0,0 +1,286 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_clu.c -- R-Car VSP1 Cubic Look-Up Table + * + * Copyright (C) 2015-2016 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/slab.h> + +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_clu.h" +#include "vsp1_dl.h" + +#define CLU_MIN_SIZE 4U +#define CLU_MAX_SIZE 8190U + +#define CLU_SIZE (17 * 17 * 17) + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline void vsp1_clu_write(struct vsp1_clu *clu, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg, data); +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +#define V4L2_CID_VSP1_CLU_TABLE (V4L2_CID_USER_BASE | 0x1001) +#define V4L2_CID_VSP1_CLU_MODE (V4L2_CID_USER_BASE | 0x1002) +#define V4L2_CID_VSP1_CLU_MODE_2D 0 +#define V4L2_CID_VSP1_CLU_MODE_3D 1 + +static int clu_set_table(struct vsp1_clu *clu, struct v4l2_ctrl *ctrl) +{ + struct vsp1_dl_body *dlb; + unsigned int i; + + dlb = vsp1_dl_body_get(clu->pool); + if (!dlb) + return -ENOMEM; + + vsp1_dl_body_write(dlb, VI6_CLU_ADDR, 0); + for (i = 0; i < CLU_SIZE; ++i) + vsp1_dl_body_write(dlb, VI6_CLU_DATA, ctrl->p_new.p_u32[i]); + + spin_lock_irq(&clu->lock); + swap(clu->clu, dlb); + spin_unlock_irq(&clu->lock); + + vsp1_dl_body_put(dlb); + return 0; +} + +static int clu_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct vsp1_clu *clu = + container_of(ctrl->handler, struct vsp1_clu, ctrls); + + switch (ctrl->id) { + case V4L2_CID_VSP1_CLU_TABLE: + clu_set_table(clu, ctrl); + break; + + case V4L2_CID_VSP1_CLU_MODE: + clu->mode = ctrl->val; + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops clu_ctrl_ops = { + .s_ctrl = clu_s_ctrl, +}; + +static const struct v4l2_ctrl_config clu_table_control = { + .ops = &clu_ctrl_ops, + .id = V4L2_CID_VSP1_CLU_TABLE, + .name = "Look-Up Table", + .type = V4L2_CTRL_TYPE_U32, + .min = 0x00000000, + .max = 0x00ffffff, + .step = 1, + .def = 0, + .dims = { 17, 17, 17 }, +}; + +static const char * const clu_mode_menu[] = { + "2D", + "3D", + NULL, +}; + +static const struct v4l2_ctrl_config clu_mode_control = { + .ops = &clu_ctrl_ops, + .id = V4L2_CID_VSP1_CLU_MODE, + .name = "Mode", + .type = V4L2_CTRL_TYPE_MENU, + .min = 0, + .max = 1, + .def = 1, + .qmenu = clu_mode_menu, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Pad Operations + */ + +static const unsigned int clu_codes[] = { + MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AHSV8888_1X32, + MEDIA_BUS_FMT_AYUV8_1X32, +}; + +static int clu_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, clu_codes, + ARRAY_SIZE(clu_codes)); +} + +static int clu_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + return vsp1_subdev_enum_frame_size(subdev, sd_state, fse, + CLU_MIN_SIZE, + CLU_MIN_SIZE, CLU_MAX_SIZE, + CLU_MAX_SIZE); +} + +static int clu_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + return vsp1_subdev_set_pad_format(subdev, sd_state, fmt, clu_codes, + ARRAY_SIZE(clu_codes), + CLU_MIN_SIZE, CLU_MIN_SIZE, + CLU_MAX_SIZE, CLU_MAX_SIZE); +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static const struct v4l2_subdev_pad_ops clu_pad_ops = { + .init_cfg = vsp1_entity_init_cfg, + .enum_mbus_code = clu_enum_mbus_code, + .enum_frame_size = clu_enum_frame_size, + .get_fmt = vsp1_subdev_get_pad_format, + .set_fmt = clu_set_format, +}; + +static const struct v4l2_subdev_ops clu_ops = { + .pad = &clu_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void clu_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_clu *clu = to_clu(&entity->subdev); + struct v4l2_mbus_framefmt *format; + + /* + * The yuv_mode can't be changed during streaming. Cache it internally + * for future runtime configuration calls. + */ + format = vsp1_entity_get_pad_format(&clu->entity, + clu->entity.config, + CLU_PAD_SINK); + clu->yuv_mode = format->code == MEDIA_BUS_FMT_AYUV8_1X32; +} + +static void clu_configure_frame(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_clu *clu = to_clu(&entity->subdev); + struct vsp1_dl_body *clu_dlb; + unsigned long flags; + u32 ctrl = VI6_CLU_CTRL_AAI | VI6_CLU_CTRL_MVS | VI6_CLU_CTRL_EN; + + /* 2D mode can only be used with the YCbCr pixel encoding. */ + if (clu->mode == V4L2_CID_VSP1_CLU_MODE_2D && clu->yuv_mode) + ctrl |= VI6_CLU_CTRL_AX1I_2D | VI6_CLU_CTRL_AX2I_2D + | VI6_CLU_CTRL_OS0_2D | VI6_CLU_CTRL_OS1_2D + | VI6_CLU_CTRL_OS2_2D | VI6_CLU_CTRL_M2D; + + vsp1_clu_write(clu, dlb, VI6_CLU_CTRL, ctrl); + + spin_lock_irqsave(&clu->lock, flags); + clu_dlb = clu->clu; + clu->clu = NULL; + spin_unlock_irqrestore(&clu->lock, flags); + + if (clu_dlb) { + vsp1_dl_list_add_body(dl, clu_dlb); + + /* Release our local reference. */ + vsp1_dl_body_put(clu_dlb); + } +} + +static void clu_destroy(struct vsp1_entity *entity) +{ + struct vsp1_clu *clu = to_clu(&entity->subdev); + + vsp1_dl_body_pool_destroy(clu->pool); +} + +static const struct vsp1_entity_operations clu_entity_ops = { + .configure_stream = clu_configure_stream, + .configure_frame = clu_configure_frame, + .destroy = clu_destroy, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +struct vsp1_clu *vsp1_clu_create(struct vsp1_device *vsp1) +{ + struct vsp1_clu *clu; + int ret; + + clu = devm_kzalloc(vsp1->dev, sizeof(*clu), GFP_KERNEL); + if (clu == NULL) + return ERR_PTR(-ENOMEM); + + spin_lock_init(&clu->lock); + + clu->entity.ops = &clu_entity_ops; + clu->entity.type = VSP1_ENTITY_CLU; + + ret = vsp1_entity_init(vsp1, &clu->entity, "clu", 2, &clu_ops, + MEDIA_ENT_F_PROC_VIDEO_LUT); + if (ret < 0) + return ERR_PTR(ret); + + /* + * Pre-allocate a body pool, with 3 bodies allowing a userspace update + * before the hardware has committed a previous set of tables, handling + * both the queued and pending dl entries. One extra entry is added to + * the CLU_SIZE to allow for the VI6_CLU_ADDR header. + */ + clu->pool = vsp1_dl_body_pool_create(clu->entity.vsp1, 3, CLU_SIZE + 1, + 0); + if (!clu->pool) + return ERR_PTR(-ENOMEM); + + /* Initialize the control handler. */ + v4l2_ctrl_handler_init(&clu->ctrls, 2); + v4l2_ctrl_new_custom(&clu->ctrls, &clu_table_control, NULL); + v4l2_ctrl_new_custom(&clu->ctrls, &clu_mode_control, NULL); + + clu->entity.subdev.ctrl_handler = &clu->ctrls; + + if (clu->ctrls.error) { + dev_err(vsp1->dev, "clu: failed to initialize controls\n"); + ret = clu->ctrls.error; + vsp1_entity_destroy(&clu->entity); + return ERR_PTR(ret); + } + + v4l2_ctrl_handler_setup(&clu->ctrls); + + return clu; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_clu.h b/drivers/media/platform/renesas/vsp1/vsp1_clu.h new file mode 100644 index 000000000..cef2f4448 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_clu.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_clu.h -- R-Car VSP1 Cubic Look-Up Table + * + * Copyright (C) 2015 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_CLU_H__ +#define __VSP1_CLU_H__ + +#include <linux/spinlock.h> + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_entity.h" + +struct vsp1_device; +struct vsp1_dl_body; + +#define CLU_PAD_SINK 0 +#define CLU_PAD_SOURCE 1 + +struct vsp1_clu { + struct vsp1_entity entity; + + struct v4l2_ctrl_handler ctrls; + + bool yuv_mode; + spinlock_t lock; + unsigned int mode; + struct vsp1_dl_body *clu; + struct vsp1_dl_body_pool *pool; +}; + +static inline struct vsp1_clu *to_clu(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_clu, entity.subdev); +} + +struct vsp1_clu *vsp1_clu_create(struct vsp1_device *vsp1); + +#endif /* __VSP1_CLU_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_dl.c b/drivers/media/platform/renesas/vsp1/vsp1_dl.c new file mode 100644 index 000000000..ad3fa1c9c --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_dl.c @@ -0,0 +1,1169 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_dl.c -- R-Car VSP1 Display List + * + * Copyright (C) 2015 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/gfp.h> +#include <linux/refcount.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#include "vsp1.h" +#include "vsp1_dl.h" + +#define VSP1_DL_NUM_ENTRIES 256 + +#define VSP1_DLH_INT_ENABLE (1 << 1) +#define VSP1_DLH_AUTO_START (1 << 0) + +#define VSP1_DLH_EXT_PRE_CMD_EXEC (1 << 9) +#define VSP1_DLH_EXT_POST_CMD_EXEC (1 << 8) + +struct vsp1_dl_header_list { + u32 num_bytes; + u32 addr; +} __packed; + +struct vsp1_dl_header { + u32 num_lists; + struct vsp1_dl_header_list lists[8]; + u32 next_header; + u32 flags; +} __packed; + +/** + * struct vsp1_dl_ext_header - Extended display list header + * @padding: padding zero bytes for alignment + * @pre_ext_dl_num_cmd: number of pre-extended command bodies to parse + * @flags: enables or disables execution of the pre and post command + * @pre_ext_dl_plist: start address of pre-extended display list bodies + * @post_ext_dl_num_cmd: number of post-extended command bodies to parse + * @post_ext_dl_plist: start address of post-extended display list bodies + */ +struct vsp1_dl_ext_header { + u32 padding; + + /* + * The datasheet represents flags as stored before pre_ext_dl_num_cmd, + * expecting 32-bit accesses. The flags are appropriate to the whole + * header, not just the pre_ext command, and thus warrant being + * separated out. Due to byte ordering, and representing as 16 bit + * values here, the flags must be positioned after the + * pre_ext_dl_num_cmd. + */ + u16 pre_ext_dl_num_cmd; + u16 flags; + u32 pre_ext_dl_plist; + + u32 post_ext_dl_num_cmd; + u32 post_ext_dl_plist; +} __packed; + +struct vsp1_dl_header_extended { + struct vsp1_dl_header header; + struct vsp1_dl_ext_header ext; +} __packed; + +struct vsp1_dl_entry { + u32 addr; + u32 data; +} __packed; + +/** + * struct vsp1_pre_ext_dl_body - Pre Extended Display List Body + * @opcode: Extended display list command operation code + * @flags: Pre-extended command flags. These are specific to each command + * @address_set: Source address set pointer. Must have 16-byte alignment + * @reserved: Zero bits for alignment. + */ +struct vsp1_pre_ext_dl_body { + u32 opcode; + u32 flags; + u32 address_set; + u32 reserved; +} __packed; + +/** + * struct vsp1_dl_body - Display list body + * @list: entry in the display list list of bodies + * @free: entry in the pool free body list + * @refcnt: reference tracking for the body + * @pool: pool to which this body belongs + * @entries: array of entries + * @dma: DMA address of the entries + * @size: size of the DMA memory in bytes + * @num_entries: number of stored entries + * @max_entries: number of entries available + */ +struct vsp1_dl_body { + struct list_head list; + struct list_head free; + + refcount_t refcnt; + + struct vsp1_dl_body_pool *pool; + + struct vsp1_dl_entry *entries; + dma_addr_t dma; + size_t size; + + unsigned int num_entries; + unsigned int max_entries; +}; + +/** + * struct vsp1_dl_body_pool - display list body pool + * @dma: DMA address of the entries + * @size: size of the full DMA memory pool in bytes + * @mem: CPU memory pointer for the pool + * @bodies: Array of DLB structures for the pool + * @free: List of free DLB entries + * @lock: Protects the free list + * @vsp1: the VSP1 device + */ +struct vsp1_dl_body_pool { + /* DMA allocation */ + dma_addr_t dma; + size_t size; + void *mem; + + /* Body management */ + struct vsp1_dl_body *bodies; + struct list_head free; + spinlock_t lock; + + struct vsp1_device *vsp1; +}; + +/** + * struct vsp1_dl_cmd_pool - Display List commands pool + * @dma: DMA address of the entries + * @size: size of the full DMA memory pool in bytes + * @mem: CPU memory pointer for the pool + * @cmds: Array of command structures for the pool + * @free: Free pool entries + * @lock: Protects the free list + * @vsp1: the VSP1 device + */ +struct vsp1_dl_cmd_pool { + /* DMA allocation */ + dma_addr_t dma; + size_t size; + void *mem; + + struct vsp1_dl_ext_cmd *cmds; + struct list_head free; + + spinlock_t lock; + + struct vsp1_device *vsp1; +}; + +/** + * struct vsp1_dl_list - Display list + * @list: entry in the display list manager lists + * @dlm: the display list manager + * @header: display list header + * @extension: extended display list header. NULL for normal lists + * @dma: DMA address for the header + * @body0: first display list body + * @bodies: list of extra display list bodies + * @pre_cmd: pre command to be issued through extended dl header + * @post_cmd: post command to be issued through extended dl header + * @has_chain: if true, indicates that there's a partition chain + * @chain: entry in the display list partition chain + * @flags: display list flags, a combination of VSP1_DL_FRAME_END_* + */ +struct vsp1_dl_list { + struct list_head list; + struct vsp1_dl_manager *dlm; + + struct vsp1_dl_header *header; + struct vsp1_dl_ext_header *extension; + dma_addr_t dma; + + struct vsp1_dl_body *body0; + struct list_head bodies; + + struct vsp1_dl_ext_cmd *pre_cmd; + struct vsp1_dl_ext_cmd *post_cmd; + + bool has_chain; + struct list_head chain; + + unsigned int flags; +}; + +/** + * struct vsp1_dl_manager - Display List manager + * @index: index of the related WPF + * @singleshot: execute the display list in single-shot mode + * @vsp1: the VSP1 device + * @lock: protects the free, active, queued, and pending lists + * @free: array of all free display lists + * @active: list currently being processed (loaded) by hardware + * @queued: list queued to the hardware (written to the DL registers) + * @pending: list waiting to be queued to the hardware + * @pool: body pool for the display list bodies + * @cmdpool: commands pool for extended display list + */ +struct vsp1_dl_manager { + unsigned int index; + bool singleshot; + struct vsp1_device *vsp1; + + spinlock_t lock; + struct list_head free; + struct vsp1_dl_list *active; + struct vsp1_dl_list *queued; + struct vsp1_dl_list *pending; + + struct vsp1_dl_body_pool *pool; + struct vsp1_dl_cmd_pool *cmdpool; +}; + +/* ----------------------------------------------------------------------------- + * Display List Body Management + */ + +/** + * vsp1_dl_body_pool_create - Create a pool of bodies from a single allocation + * @vsp1: The VSP1 device + * @num_bodies: The number of bodies to allocate + * @num_entries: The maximum number of entries that a body can contain + * @extra_size: Extra allocation provided for the bodies + * + * Allocate a pool of display list bodies each with enough memory to contain the + * requested number of entries plus the @extra_size. + * + * Return a pointer to a pool on success or NULL if memory can't be allocated. + */ +struct vsp1_dl_body_pool * +vsp1_dl_body_pool_create(struct vsp1_device *vsp1, unsigned int num_bodies, + unsigned int num_entries, size_t extra_size) +{ + struct vsp1_dl_body_pool *pool; + size_t dlb_size; + unsigned int i; + + pool = kzalloc(sizeof(*pool), GFP_KERNEL); + if (!pool) + return NULL; + + pool->vsp1 = vsp1; + + /* + * TODO: 'extra_size' is only used by vsp1_dlm_create(), to allocate + * extra memory for the display list header. We need only one header per + * display list, not per display list body, thus this allocation is + * extraneous and should be reworked in the future. + */ + dlb_size = num_entries * sizeof(struct vsp1_dl_entry) + extra_size; + pool->size = dlb_size * num_bodies; + + pool->bodies = kcalloc(num_bodies, sizeof(*pool->bodies), GFP_KERNEL); + if (!pool->bodies) { + kfree(pool); + return NULL; + } + + pool->mem = dma_alloc_wc(vsp1->bus_master, pool->size, &pool->dma, + GFP_KERNEL); + if (!pool->mem) { + kfree(pool->bodies); + kfree(pool); + return NULL; + } + + spin_lock_init(&pool->lock); + INIT_LIST_HEAD(&pool->free); + + for (i = 0; i < num_bodies; ++i) { + struct vsp1_dl_body *dlb = &pool->bodies[i]; + + dlb->pool = pool; + dlb->max_entries = num_entries; + + dlb->dma = pool->dma + i * dlb_size; + dlb->entries = pool->mem + i * dlb_size; + + list_add_tail(&dlb->free, &pool->free); + } + + return pool; +} + +/** + * vsp1_dl_body_pool_destroy - Release a body pool + * @pool: The body pool + * + * Release all components of a pool allocation. + */ +void vsp1_dl_body_pool_destroy(struct vsp1_dl_body_pool *pool) +{ + if (!pool) + return; + + if (pool->mem) + dma_free_wc(pool->vsp1->bus_master, pool->size, pool->mem, + pool->dma); + + kfree(pool->bodies); + kfree(pool); +} + +/** + * vsp1_dl_body_get - Obtain a body from a pool + * @pool: The body pool + * + * Obtain a body from the pool without blocking. + * + * Returns a display list body or NULL if there are none available. + */ +struct vsp1_dl_body *vsp1_dl_body_get(struct vsp1_dl_body_pool *pool) +{ + struct vsp1_dl_body *dlb = NULL; + unsigned long flags; + + spin_lock_irqsave(&pool->lock, flags); + + if (!list_empty(&pool->free)) { + dlb = list_first_entry(&pool->free, struct vsp1_dl_body, free); + list_del(&dlb->free); + refcount_set(&dlb->refcnt, 1); + } + + spin_unlock_irqrestore(&pool->lock, flags); + + return dlb; +} + +/** + * vsp1_dl_body_put - Return a body back to its pool + * @dlb: The display list body + * + * Return a body back to the pool, and reset the num_entries to clear the list. + */ +void vsp1_dl_body_put(struct vsp1_dl_body *dlb) +{ + unsigned long flags; + + if (!dlb) + return; + + if (!refcount_dec_and_test(&dlb->refcnt)) + return; + + dlb->num_entries = 0; + + spin_lock_irqsave(&dlb->pool->lock, flags); + list_add_tail(&dlb->free, &dlb->pool->free); + spin_unlock_irqrestore(&dlb->pool->lock, flags); +} + +/** + * vsp1_dl_body_write - Write a register to a display list body + * @dlb: The body + * @reg: The register address + * @data: The register value + * + * Write the given register and value to the display list body. The maximum + * number of entries that can be written in a body is specified when the body is + * allocated by vsp1_dl_body_alloc(). + */ +void vsp1_dl_body_write(struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + if (WARN_ONCE(dlb->num_entries >= dlb->max_entries, + "DLB size exceeded (max %u)", dlb->max_entries)) + return; + + dlb->entries[dlb->num_entries].addr = reg; + dlb->entries[dlb->num_entries].data = data; + dlb->num_entries++; +} + +/* ----------------------------------------------------------------------------- + * Display List Extended Command Management + */ + +enum vsp1_extcmd_type { + VSP1_EXTCMD_AUTODISP, + VSP1_EXTCMD_AUTOFLD, +}; + +struct vsp1_extended_command_info { + u16 opcode; + size_t body_size; +}; + +static const struct vsp1_extended_command_info vsp1_extended_commands[] = { + [VSP1_EXTCMD_AUTODISP] = { 0x02, 96 }, + [VSP1_EXTCMD_AUTOFLD] = { 0x03, 160 }, +}; + +/** + * vsp1_dl_cmd_pool_create - Create a pool of commands from a single allocation + * @vsp1: The VSP1 device + * @type: The command pool type + * @num_cmds: The number of commands to allocate + * + * Allocate a pool of commands each with enough memory to contain the private + * data of each command. The allocation sizes are dependent upon the command + * type. + * + * Return a pointer to the pool on success or NULL if memory can't be allocated. + */ +static struct vsp1_dl_cmd_pool * +vsp1_dl_cmd_pool_create(struct vsp1_device *vsp1, enum vsp1_extcmd_type type, + unsigned int num_cmds) +{ + struct vsp1_dl_cmd_pool *pool; + unsigned int i; + size_t cmd_size; + + pool = kzalloc(sizeof(*pool), GFP_KERNEL); + if (!pool) + return NULL; + + pool->vsp1 = vsp1; + + spin_lock_init(&pool->lock); + INIT_LIST_HEAD(&pool->free); + + pool->cmds = kcalloc(num_cmds, sizeof(*pool->cmds), GFP_KERNEL); + if (!pool->cmds) { + kfree(pool); + return NULL; + } + + cmd_size = sizeof(struct vsp1_pre_ext_dl_body) + + vsp1_extended_commands[type].body_size; + cmd_size = ALIGN(cmd_size, 16); + + pool->size = cmd_size * num_cmds; + pool->mem = dma_alloc_wc(vsp1->bus_master, pool->size, &pool->dma, + GFP_KERNEL); + if (!pool->mem) { + kfree(pool->cmds); + kfree(pool); + return NULL; + } + + for (i = 0; i < num_cmds; ++i) { + struct vsp1_dl_ext_cmd *cmd = &pool->cmds[i]; + size_t cmd_offset = i * cmd_size; + /* data_offset must be 16 byte aligned for DMA. */ + size_t data_offset = sizeof(struct vsp1_pre_ext_dl_body) + + cmd_offset; + + cmd->pool = pool; + cmd->opcode = vsp1_extended_commands[type].opcode; + + /* + * TODO: Auto-disp can utilise more than one extended body + * command per cmd. + */ + cmd->num_cmds = 1; + cmd->cmds = pool->mem + cmd_offset; + cmd->cmd_dma = pool->dma + cmd_offset; + + cmd->data = pool->mem + data_offset; + cmd->data_dma = pool->dma + data_offset; + + list_add_tail(&cmd->free, &pool->free); + } + + return pool; +} + +static +struct vsp1_dl_ext_cmd *vsp1_dl_ext_cmd_get(struct vsp1_dl_cmd_pool *pool) +{ + struct vsp1_dl_ext_cmd *cmd = NULL; + unsigned long flags; + + spin_lock_irqsave(&pool->lock, flags); + + if (!list_empty(&pool->free)) { + cmd = list_first_entry(&pool->free, struct vsp1_dl_ext_cmd, + free); + list_del(&cmd->free); + } + + spin_unlock_irqrestore(&pool->lock, flags); + + return cmd; +} + +static void vsp1_dl_ext_cmd_put(struct vsp1_dl_ext_cmd *cmd) +{ + unsigned long flags; + + if (!cmd) + return; + + /* Reset flags, these mark data usage. */ + cmd->flags = 0; + + spin_lock_irqsave(&cmd->pool->lock, flags); + list_add_tail(&cmd->free, &cmd->pool->free); + spin_unlock_irqrestore(&cmd->pool->lock, flags); +} + +static void vsp1_dl_ext_cmd_pool_destroy(struct vsp1_dl_cmd_pool *pool) +{ + if (!pool) + return; + + if (pool->mem) + dma_free_wc(pool->vsp1->bus_master, pool->size, pool->mem, + pool->dma); + + kfree(pool->cmds); + kfree(pool); +} + +struct vsp1_dl_ext_cmd *vsp1_dl_get_pre_cmd(struct vsp1_dl_list *dl) +{ + struct vsp1_dl_manager *dlm = dl->dlm; + + if (dl->pre_cmd) + return dl->pre_cmd; + + dl->pre_cmd = vsp1_dl_ext_cmd_get(dlm->cmdpool); + + return dl->pre_cmd; +} + +/* ---------------------------------------------------------------------------- + * Display List Transaction Management + */ + +static struct vsp1_dl_list *vsp1_dl_list_alloc(struct vsp1_dl_manager *dlm) +{ + struct vsp1_dl_list *dl; + size_t header_offset; + + dl = kzalloc(sizeof(*dl), GFP_KERNEL); + if (!dl) + return NULL; + + INIT_LIST_HEAD(&dl->bodies); + dl->dlm = dlm; + + /* Get a default body for our list. */ + dl->body0 = vsp1_dl_body_get(dlm->pool); + if (!dl->body0) { + kfree(dl); + return NULL; + } + + header_offset = dl->body0->max_entries * sizeof(*dl->body0->entries); + + dl->header = ((void *)dl->body0->entries) + header_offset; + dl->dma = dl->body0->dma + header_offset; + + memset(dl->header, 0, sizeof(*dl->header)); + dl->header->lists[0].addr = dl->body0->dma; + + return dl; +} + +static void vsp1_dl_list_bodies_put(struct vsp1_dl_list *dl) +{ + struct vsp1_dl_body *dlb, *tmp; + + list_for_each_entry_safe(dlb, tmp, &dl->bodies, list) { + list_del(&dlb->list); + vsp1_dl_body_put(dlb); + } +} + +static void vsp1_dl_list_free(struct vsp1_dl_list *dl) +{ + vsp1_dl_body_put(dl->body0); + vsp1_dl_list_bodies_put(dl); + + kfree(dl); +} + +/** + * vsp1_dl_list_get - Get a free display list + * @dlm: The display list manager + * + * Get a display list from the pool of free lists and return it. + * + * This function must be called without the display list manager lock held. + */ +struct vsp1_dl_list *vsp1_dl_list_get(struct vsp1_dl_manager *dlm) +{ + struct vsp1_dl_list *dl = NULL; + unsigned long flags; + + spin_lock_irqsave(&dlm->lock, flags); + + if (!list_empty(&dlm->free)) { + dl = list_first_entry(&dlm->free, struct vsp1_dl_list, list); + list_del(&dl->list); + + /* + * The display list chain must be initialised to ensure every + * display list can assert list_empty() if it is not in a chain. + */ + INIT_LIST_HEAD(&dl->chain); + } + + spin_unlock_irqrestore(&dlm->lock, flags); + + return dl; +} + +/* This function must be called with the display list manager lock held.*/ +static void __vsp1_dl_list_put(struct vsp1_dl_list *dl) +{ + struct vsp1_dl_list *dl_next; + + if (!dl) + return; + + /* + * Release any linked display-lists which were chained for a single + * hardware operation. + */ + if (dl->has_chain) { + list_for_each_entry(dl_next, &dl->chain, chain) + __vsp1_dl_list_put(dl_next); + } + + dl->has_chain = false; + + vsp1_dl_list_bodies_put(dl); + + vsp1_dl_ext_cmd_put(dl->pre_cmd); + vsp1_dl_ext_cmd_put(dl->post_cmd); + + dl->pre_cmd = NULL; + dl->post_cmd = NULL; + + /* + * body0 is reused as as an optimisation as presently every display list + * has at least one body, thus we reinitialise the entries list. + */ + dl->body0->num_entries = 0; + + list_add_tail(&dl->list, &dl->dlm->free); +} + +/** + * vsp1_dl_list_put - Release a display list + * @dl: The display list + * + * Release the display list and return it to the pool of free lists. + * + * Passing a NULL pointer to this function is safe, in that case no operation + * will be performed. + */ +void vsp1_dl_list_put(struct vsp1_dl_list *dl) +{ + unsigned long flags; + + if (!dl) + return; + + spin_lock_irqsave(&dl->dlm->lock, flags); + __vsp1_dl_list_put(dl); + spin_unlock_irqrestore(&dl->dlm->lock, flags); +} + +/** + * vsp1_dl_list_get_body0 - Obtain the default body for the display list + * @dl: The display list + * + * Obtain a pointer to the internal display list body allowing this to be passed + * directly to configure operations. + */ +struct vsp1_dl_body *vsp1_dl_list_get_body0(struct vsp1_dl_list *dl) +{ + return dl->body0; +} + +/** + * vsp1_dl_list_add_body - Add a body to the display list + * @dl: The display list + * @dlb: The body + * + * Add a display list body to a display list. Registers contained in bodies are + * processed after registers contained in the main display list, in the order in + * which bodies are added. + * + * Adding a body to a display list passes ownership of the body to the list. The + * caller retains its reference to the body when adding it to the display list, + * but is not allowed to add new entries to the body. + * + * The reference must be explicitly released by a call to vsp1_dl_body_put() + * when the body isn't needed anymore. + */ +int vsp1_dl_list_add_body(struct vsp1_dl_list *dl, struct vsp1_dl_body *dlb) +{ + refcount_inc(&dlb->refcnt); + + list_add_tail(&dlb->list, &dl->bodies); + + return 0; +} + +/** + * vsp1_dl_list_add_chain - Add a display list to a chain + * @head: The head display list + * @dl: The new display list + * + * Add a display list to an existing display list chain. The chained lists + * will be automatically processed by the hardware without intervention from + * the CPU. A display list end interrupt will only complete after the last + * display list in the chain has completed processing. + * + * Adding a display list to a chain passes ownership of the display list to + * the head display list item. The chain is released when the head dl item is + * put back with __vsp1_dl_list_put(). + */ +int vsp1_dl_list_add_chain(struct vsp1_dl_list *head, + struct vsp1_dl_list *dl) +{ + head->has_chain = true; + list_add_tail(&dl->chain, &head->chain); + return 0; +} + +static void vsp1_dl_ext_cmd_fill_header(struct vsp1_dl_ext_cmd *cmd) +{ + cmd->cmds[0].opcode = cmd->opcode; + cmd->cmds[0].flags = cmd->flags; + cmd->cmds[0].address_set = cmd->data_dma; + cmd->cmds[0].reserved = 0; +} + +static void vsp1_dl_list_fill_header(struct vsp1_dl_list *dl, bool is_last) +{ + struct vsp1_dl_manager *dlm = dl->dlm; + struct vsp1_dl_header_list *hdr = dl->header->lists; + struct vsp1_dl_body *dlb; + unsigned int num_lists = 0; + + /* + * Fill the header with the display list bodies addresses and sizes. The + * address of the first body has already been filled when the display + * list was allocated. + */ + + hdr->num_bytes = dl->body0->num_entries + * sizeof(*dl->header->lists); + + list_for_each_entry(dlb, &dl->bodies, list) { + num_lists++; + hdr++; + + hdr->addr = dlb->dma; + hdr->num_bytes = dlb->num_entries + * sizeof(*dl->header->lists); + } + + dl->header->num_lists = num_lists; + dl->header->flags = 0; + + /* + * Enable the interrupt for the end of each frame. In continuous mode + * chained lists are used with one list per frame, so enable the + * interrupt for each list. In singleshot mode chained lists are used + * to partition a single frame, so enable the interrupt for the last + * list only. + */ + if (!dlm->singleshot || is_last) + dl->header->flags |= VSP1_DLH_INT_ENABLE; + + /* + * In continuous mode enable auto-start for all lists, as the VSP must + * loop on the same list until a new one is queued. In singleshot mode + * enable auto-start for all lists but the last to chain processing of + * partitions without software intervention. + */ + if (!dlm->singleshot || !is_last) + dl->header->flags |= VSP1_DLH_AUTO_START; + + if (!is_last) { + /* + * If this is not the last display list in the chain, queue the + * next item for automatic processing by the hardware. + */ + struct vsp1_dl_list *next = list_next_entry(dl, chain); + + dl->header->next_header = next->dma; + } else if (!dlm->singleshot) { + /* + * if the display list manager works in continuous mode, the VSP + * should loop over the display list continuously until + * instructed to do otherwise. + */ + dl->header->next_header = dl->dma; + } + + if (!dl->extension) + return; + + dl->extension->flags = 0; + + if (dl->pre_cmd) { + dl->extension->pre_ext_dl_plist = dl->pre_cmd->cmd_dma; + dl->extension->pre_ext_dl_num_cmd = dl->pre_cmd->num_cmds; + dl->extension->flags |= VSP1_DLH_EXT_PRE_CMD_EXEC; + + vsp1_dl_ext_cmd_fill_header(dl->pre_cmd); + } + + if (dl->post_cmd) { + dl->extension->post_ext_dl_plist = dl->post_cmd->cmd_dma; + dl->extension->post_ext_dl_num_cmd = dl->post_cmd->num_cmds; + dl->extension->flags |= VSP1_DLH_EXT_POST_CMD_EXEC; + + vsp1_dl_ext_cmd_fill_header(dl->post_cmd); + } +} + +static bool vsp1_dl_list_hw_update_pending(struct vsp1_dl_manager *dlm) +{ + struct vsp1_device *vsp1 = dlm->vsp1; + + if (!dlm->queued) + return false; + + /* + * Check whether the VSP1 has taken the update. The hardware indicates + * this by clearing the UPDHDR bit in the CMD register. + */ + return !!(vsp1_read(vsp1, VI6_CMD(dlm->index)) & VI6_CMD_UPDHDR); +} + +static void vsp1_dl_list_hw_enqueue(struct vsp1_dl_list *dl) +{ + struct vsp1_dl_manager *dlm = dl->dlm; + struct vsp1_device *vsp1 = dlm->vsp1; + + /* + * Program the display list header address. If the hardware is idle + * (single-shot mode or first frame in continuous mode) it will then be + * started independently. If the hardware is operating, the + * VI6_DL_HDR_REF_ADDR register will be updated with the display list + * address. + */ + vsp1_write(vsp1, VI6_DL_HDR_ADDR(dlm->index), dl->dma); +} + +static void vsp1_dl_list_commit_continuous(struct vsp1_dl_list *dl) +{ + struct vsp1_dl_manager *dlm = dl->dlm; + + /* + * If a previous display list has been queued to the hardware but not + * processed yet, the VSP can start processing it at any time. In that + * case we can't replace the queued list by the new one, as we could + * race with the hardware. We thus mark the update as pending, it will + * be queued up to the hardware by the frame end interrupt handler. + * + * If a display list is already pending we simply drop it as the new + * display list is assumed to contain a more recent configuration. It is + * an error if the already pending list has the + * VSP1_DL_FRAME_END_INTERNAL flag set, as there is then a process + * waiting for that list to complete. This shouldn't happen as the + * waiting process should perform proper locking, but warn just in + * case. + */ + if (vsp1_dl_list_hw_update_pending(dlm)) { + WARN_ON(dlm->pending && + (dlm->pending->flags & VSP1_DL_FRAME_END_INTERNAL)); + __vsp1_dl_list_put(dlm->pending); + dlm->pending = dl; + return; + } + + /* + * Pass the new display list to the hardware and mark it as queued. It + * will become active when the hardware starts processing it. + */ + vsp1_dl_list_hw_enqueue(dl); + + __vsp1_dl_list_put(dlm->queued); + dlm->queued = dl; +} + +static void vsp1_dl_list_commit_singleshot(struct vsp1_dl_list *dl) +{ + struct vsp1_dl_manager *dlm = dl->dlm; + + /* + * When working in single-shot mode, the caller guarantees that the + * hardware is idle at this point. Just commit the head display list + * to hardware. Chained lists will be started automatically. + */ + vsp1_dl_list_hw_enqueue(dl); + + dlm->active = dl; +} + +void vsp1_dl_list_commit(struct vsp1_dl_list *dl, unsigned int dl_flags) +{ + struct vsp1_dl_manager *dlm = dl->dlm; + struct vsp1_dl_list *dl_next; + unsigned long flags; + + /* Fill the header for the head and chained display lists. */ + vsp1_dl_list_fill_header(dl, list_empty(&dl->chain)); + + list_for_each_entry(dl_next, &dl->chain, chain) { + bool last = list_is_last(&dl_next->chain, &dl->chain); + + vsp1_dl_list_fill_header(dl_next, last); + } + + dl->flags = dl_flags & ~VSP1_DL_FRAME_END_COMPLETED; + + spin_lock_irqsave(&dlm->lock, flags); + + if (dlm->singleshot) + vsp1_dl_list_commit_singleshot(dl); + else + vsp1_dl_list_commit_continuous(dl); + + spin_unlock_irqrestore(&dlm->lock, flags); +} + +/* ----------------------------------------------------------------------------- + * Display List Manager + */ + +/** + * vsp1_dlm_irq_frame_end - Display list handler for the frame end interrupt + * @dlm: the display list manager + * + * Return a set of flags that indicates display list completion status. + * + * The VSP1_DL_FRAME_END_COMPLETED flag indicates that the previous display list + * has completed at frame end. If the flag is not returned display list + * completion has been delayed by one frame because the display list commit + * raced with the frame end interrupt. The function always returns with the flag + * set in single-shot mode as display list processing is then not continuous and + * races never occur. + * + * The following flags are only supported for continuous mode. + * + * The VSP1_DL_FRAME_END_INTERNAL flag indicates that the display list that just + * became active had been queued with the internal notification flag. + * + * The VSP1_DL_FRAME_END_WRITEBACK flag indicates that the previously active + * display list had been queued with the writeback flag. + */ +unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm) +{ + struct vsp1_device *vsp1 = dlm->vsp1; + u32 status = vsp1_read(vsp1, VI6_STATUS); + unsigned int flags = 0; + + spin_lock(&dlm->lock); + + /* + * The mem-to-mem pipelines work in single-shot mode. No new display + * list can be queued, we don't have to do anything. + */ + if (dlm->singleshot) { + __vsp1_dl_list_put(dlm->active); + dlm->active = NULL; + flags |= VSP1_DL_FRAME_END_COMPLETED; + goto done; + } + + /* + * If the commit operation raced with the interrupt and occurred after + * the frame end event but before interrupt processing, the hardware + * hasn't taken the update into account yet. We have to skip one frame + * and retry. + */ + if (vsp1_dl_list_hw_update_pending(dlm)) + goto done; + + /* + * Progressive streams report only TOP fields. If we have a BOTTOM + * field, we are interlaced, and expect the frame to complete on the + * next frame end interrupt. + */ + if (status & VI6_STATUS_FLD_STD(dlm->index)) + goto done; + + /* + * If the active display list has the writeback flag set, the frame + * completion marks the end of the writeback capture. Return the + * VSP1_DL_FRAME_END_WRITEBACK flag and reset the display list's + * writeback flag. + */ + if (dlm->active && (dlm->active->flags & VSP1_DL_FRAME_END_WRITEBACK)) { + flags |= VSP1_DL_FRAME_END_WRITEBACK; + dlm->active->flags &= ~VSP1_DL_FRAME_END_WRITEBACK; + } + + /* + * The device starts processing the queued display list right after the + * frame end interrupt. The display list thus becomes active. + */ + if (dlm->queued) { + if (dlm->queued->flags & VSP1_DL_FRAME_END_INTERNAL) + flags |= VSP1_DL_FRAME_END_INTERNAL; + dlm->queued->flags &= ~VSP1_DL_FRAME_END_INTERNAL; + + __vsp1_dl_list_put(dlm->active); + dlm->active = dlm->queued; + dlm->queued = NULL; + flags |= VSP1_DL_FRAME_END_COMPLETED; + } + + /* + * Now that the VSP has started processing the queued display list, we + * can queue the pending display list to the hardware if one has been + * prepared. + */ + if (dlm->pending) { + vsp1_dl_list_hw_enqueue(dlm->pending); + dlm->queued = dlm->pending; + dlm->pending = NULL; + } + +done: + spin_unlock(&dlm->lock); + + return flags; +} + +/* Hardware Setup */ +void vsp1_dlm_setup(struct vsp1_device *vsp1) +{ + unsigned int i; + u32 ctrl = (256 << VI6_DL_CTRL_AR_WAIT_SHIFT) + | VI6_DL_CTRL_DC2 | VI6_DL_CTRL_DC1 | VI6_DL_CTRL_DC0 + | VI6_DL_CTRL_DLE; + u32 ext_dl = (0x02 << VI6_DL_EXT_CTRL_POLINT_SHIFT) + | VI6_DL_EXT_CTRL_DLPRI | VI6_DL_EXT_CTRL_EXT; + + if (vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) { + for (i = 0; i < vsp1->info->wpf_count; ++i) + vsp1_write(vsp1, VI6_DL_EXT_CTRL(i), ext_dl); + } + + vsp1_write(vsp1, VI6_DL_CTRL, ctrl); + vsp1_write(vsp1, VI6_DL_SWAP, VI6_DL_SWAP_LWS); +} + +void vsp1_dlm_reset(struct vsp1_dl_manager *dlm) +{ + unsigned long flags; + + spin_lock_irqsave(&dlm->lock, flags); + + __vsp1_dl_list_put(dlm->active); + __vsp1_dl_list_put(dlm->queued); + __vsp1_dl_list_put(dlm->pending); + + spin_unlock_irqrestore(&dlm->lock, flags); + + dlm->active = NULL; + dlm->queued = NULL; + dlm->pending = NULL; +} + +struct vsp1_dl_body *vsp1_dlm_dl_body_get(struct vsp1_dl_manager *dlm) +{ + return vsp1_dl_body_get(dlm->pool); +} + +struct vsp1_dl_manager *vsp1_dlm_create(struct vsp1_device *vsp1, + unsigned int index, + unsigned int prealloc) +{ + struct vsp1_dl_manager *dlm; + size_t header_size; + unsigned int i; + + dlm = devm_kzalloc(vsp1->dev, sizeof(*dlm), GFP_KERNEL); + if (!dlm) + return NULL; + + dlm->index = index; + dlm->singleshot = vsp1->info->uapi; + dlm->vsp1 = vsp1; + + spin_lock_init(&dlm->lock); + INIT_LIST_HEAD(&dlm->free); + + /* + * Initialize the display list body and allocate DMA memory for the body + * and the header. Both are allocated together to avoid memory + * fragmentation, with the header located right after the body in + * memory. An extra body is allocated on top of the prealloc to account + * for the cached body used by the vsp1_pipeline object. + */ + header_size = vsp1_feature(vsp1, VSP1_HAS_EXT_DL) ? + sizeof(struct vsp1_dl_header_extended) : + sizeof(struct vsp1_dl_header); + + header_size = ALIGN(header_size, 8); + + dlm->pool = vsp1_dl_body_pool_create(vsp1, prealloc + 1, + VSP1_DL_NUM_ENTRIES, header_size); + if (!dlm->pool) + return NULL; + + for (i = 0; i < prealloc; ++i) { + struct vsp1_dl_list *dl; + + dl = vsp1_dl_list_alloc(dlm); + if (!dl) { + vsp1_dlm_destroy(dlm); + return NULL; + } + + /* The extended header immediately follows the header. */ + if (vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) + dl->extension = (void *)dl->header + + sizeof(*dl->header); + + list_add_tail(&dl->list, &dlm->free); + } + + if (vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) { + dlm->cmdpool = vsp1_dl_cmd_pool_create(vsp1, + VSP1_EXTCMD_AUTOFLD, prealloc); + if (!dlm->cmdpool) { + vsp1_dlm_destroy(dlm); + return NULL; + } + } + + return dlm; +} + +void vsp1_dlm_destroy(struct vsp1_dl_manager *dlm) +{ + struct vsp1_dl_list *dl, *next; + + if (!dlm) + return; + + list_for_each_entry_safe(dl, next, &dlm->free, list) { + list_del(&dl->list); + vsp1_dl_list_free(dl); + } + + vsp1_dl_body_pool_destroy(dlm->pool); + vsp1_dl_ext_cmd_pool_destroy(dlm->cmdpool); +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_dl.h b/drivers/media/platform/renesas/vsp1/vsp1_dl.h new file mode 100644 index 000000000..bebe16483 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_dl.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_dl.h -- R-Car VSP1 Display List + * + * Copyright (C) 2015 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_DL_H__ +#define __VSP1_DL_H__ + +#include <linux/types.h> + +struct vsp1_device; +struct vsp1_dl_body; +struct vsp1_dl_body_pool; +struct vsp1_dl_list; +struct vsp1_dl_manager; + +/* Keep these flags in sync with VSP1_DU_STATUS_* in include/media/vsp1.h. */ +#define VSP1_DL_FRAME_END_COMPLETED BIT(0) +#define VSP1_DL_FRAME_END_WRITEBACK BIT(1) +#define VSP1_DL_FRAME_END_INTERNAL BIT(2) + +/** + * struct vsp1_dl_ext_cmd - Extended Display command + * @pool: pool to which this command belongs + * @free: entry in the pool of free commands list + * @opcode: command type opcode + * @flags: flags used by the command + * @cmds: array of command bodies for this extended cmd + * @num_cmds: quantity of commands in @cmds array + * @cmd_dma: DMA address of the command body + * @data: memory allocation for command-specific data + * @data_dma: DMA address for command-specific data + */ +struct vsp1_dl_ext_cmd { + struct vsp1_dl_cmd_pool *pool; + struct list_head free; + + u8 opcode; + u32 flags; + + struct vsp1_pre_ext_dl_body *cmds; + unsigned int num_cmds; + dma_addr_t cmd_dma; + + void *data; + dma_addr_t data_dma; +}; + +void vsp1_dlm_setup(struct vsp1_device *vsp1); + +struct vsp1_dl_manager *vsp1_dlm_create(struct vsp1_device *vsp1, + unsigned int index, + unsigned int prealloc); +void vsp1_dlm_destroy(struct vsp1_dl_manager *dlm); +void vsp1_dlm_reset(struct vsp1_dl_manager *dlm); +unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm); +struct vsp1_dl_body *vsp1_dlm_dl_body_get(struct vsp1_dl_manager *dlm); + +struct vsp1_dl_list *vsp1_dl_list_get(struct vsp1_dl_manager *dlm); +void vsp1_dl_list_put(struct vsp1_dl_list *dl); +struct vsp1_dl_body *vsp1_dl_list_get_body0(struct vsp1_dl_list *dl); +struct vsp1_dl_ext_cmd *vsp1_dl_get_pre_cmd(struct vsp1_dl_list *dl); +void vsp1_dl_list_commit(struct vsp1_dl_list *dl, unsigned int dl_flags); + +struct vsp1_dl_body_pool * +vsp1_dl_body_pool_create(struct vsp1_device *vsp1, unsigned int num_bodies, + unsigned int num_entries, size_t extra_size); +void vsp1_dl_body_pool_destroy(struct vsp1_dl_body_pool *pool); +struct vsp1_dl_body *vsp1_dl_body_get(struct vsp1_dl_body_pool *pool); +void vsp1_dl_body_put(struct vsp1_dl_body *dlb); + +void vsp1_dl_body_write(struct vsp1_dl_body *dlb, u32 reg, u32 data); +int vsp1_dl_list_add_body(struct vsp1_dl_list *dl, struct vsp1_dl_body *dlb); +int vsp1_dl_list_add_chain(struct vsp1_dl_list *head, struct vsp1_dl_list *dl); + +#endif /* __VSP1_DL_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_drm.c b/drivers/media/platform/renesas/vsp1/vsp1_drm.c new file mode 100644 index 000000000..7fe375b63 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_drm.c @@ -0,0 +1,996 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_drm.c -- R-Car VSP1 DRM/KMS Interface + * + * Copyright (C) 2015 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> + +#include <media/media-entity.h> +#include <media/v4l2-subdev.h> +#include <media/vsp1.h> + +#include "vsp1.h" +#include "vsp1_brx.h" +#include "vsp1_dl.h" +#include "vsp1_drm.h" +#include "vsp1_lif.h" +#include "vsp1_pipe.h" +#include "vsp1_rwpf.h" +#include "vsp1_uif.h" + +#define BRX_NAME(e) (e)->type == VSP1_ENTITY_BRU ? "BRU" : "BRS" + +/* ----------------------------------------------------------------------------- + * Interrupt Handling + */ + +static void vsp1_du_pipeline_frame_end(struct vsp1_pipeline *pipe, + unsigned int completion) +{ + struct vsp1_drm_pipeline *drm_pipe = to_vsp1_drm_pipeline(pipe); + + if (drm_pipe->du_complete) { + struct vsp1_entity *uif = drm_pipe->uif; + unsigned int status = completion + & (VSP1_DU_STATUS_COMPLETE | + VSP1_DU_STATUS_WRITEBACK); + u32 crc; + + crc = uif ? vsp1_uif_get_crc(to_uif(&uif->subdev)) : 0; + drm_pipe->du_complete(drm_pipe->du_private, status, crc); + } + + if (completion & VSP1_DL_FRAME_END_INTERNAL) { + drm_pipe->force_brx_release = false; + wake_up(&drm_pipe->wait_queue); + } +} + +/* ----------------------------------------------------------------------------- + * Pipeline Configuration + */ + +/* + * Insert the UIF in the pipeline between the prev and next entities. If no UIF + * is available connect the two entities directly. + */ +static int vsp1_du_insert_uif(struct vsp1_device *vsp1, + struct vsp1_pipeline *pipe, + struct vsp1_entity *uif, + struct vsp1_entity *prev, unsigned int prev_pad, + struct vsp1_entity *next, unsigned int next_pad) +{ + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + int ret; + + if (!uif) { + /* + * If there's no UIF to be inserted, connect the previous and + * next entities directly. + */ + prev->sink = next; + prev->sink_pad = next_pad; + return 0; + } + + prev->sink = uif; + prev->sink_pad = UIF_PAD_SINK; + + format.pad = prev_pad; + + ret = v4l2_subdev_call(&prev->subdev, pad, get_fmt, NULL, &format); + if (ret < 0) + return ret; + + format.pad = UIF_PAD_SINK; + + ret = v4l2_subdev_call(&uif->subdev, pad, set_fmt, NULL, &format); + if (ret < 0) + return ret; + + dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on UIF sink\n", + __func__, format.format.width, format.format.height, + format.format.code); + + /* + * The UIF doesn't mangle the format between its sink and source pads, + * so there is no need to retrieve the format on its source pad. + */ + + uif->sink = next; + uif->sink_pad = next_pad; + + return 0; +} + +/* Setup one RPF and the connected BRx sink pad. */ +static int vsp1_du_pipeline_setup_rpf(struct vsp1_device *vsp1, + struct vsp1_pipeline *pipe, + struct vsp1_rwpf *rpf, + struct vsp1_entity *uif, + unsigned int brx_input) +{ + struct v4l2_subdev_selection sel = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + const struct v4l2_rect *crop; + int ret; + + /* + * Configure the format on the RPF sink pad and propagate it up to the + * BRx sink pad. + */ + crop = &vsp1->drm->inputs[rpf->entity.index].crop; + + format.pad = RWPF_PAD_SINK; + format.format.width = crop->width + crop->left; + format.format.height = crop->height + crop->top; + format.format.code = rpf->fmtinfo->mbus; + format.format.field = V4L2_FIELD_NONE; + + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL, + &format); + if (ret < 0) + return ret; + + dev_dbg(vsp1->dev, + "%s: set format %ux%u (%x) on RPF%u sink\n", + __func__, format.format.width, format.format.height, + format.format.code, rpf->entity.index); + + sel.pad = RWPF_PAD_SINK; + sel.target = V4L2_SEL_TGT_CROP; + sel.r = *crop; + + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_selection, NULL, + &sel); + if (ret < 0) + return ret; + + dev_dbg(vsp1->dev, + "%s: set selection (%u,%u)/%ux%u on RPF%u sink\n", + __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height, + rpf->entity.index); + + /* + * RPF source, hardcode the format to ARGB8888 to turn on format + * conversion if needed. + */ + format.pad = RWPF_PAD_SOURCE; + + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, get_fmt, NULL, + &format); + if (ret < 0) + return ret; + + dev_dbg(vsp1->dev, + "%s: got format %ux%u (%x) on RPF%u source\n", + __func__, format.format.width, format.format.height, + format.format.code, rpf->entity.index); + + format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32; + + ret = v4l2_subdev_call(&rpf->entity.subdev, pad, set_fmt, NULL, + &format); + if (ret < 0) + return ret; + + /* Insert and configure the UIF if available. */ + ret = vsp1_du_insert_uif(vsp1, pipe, uif, &rpf->entity, RWPF_PAD_SOURCE, + pipe->brx, brx_input); + if (ret < 0) + return ret; + + /* BRx sink, propagate the format from the RPF source. */ + format.pad = brx_input; + + ret = v4l2_subdev_call(&pipe->brx->subdev, pad, set_fmt, NULL, + &format); + if (ret < 0) + return ret; + + dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n", + __func__, format.format.width, format.format.height, + format.format.code, BRX_NAME(pipe->brx), format.pad); + + sel.pad = brx_input; + sel.target = V4L2_SEL_TGT_COMPOSE; + sel.r = vsp1->drm->inputs[rpf->entity.index].compose; + + ret = v4l2_subdev_call(&pipe->brx->subdev, pad, set_selection, NULL, + &sel); + if (ret < 0) + return ret; + + dev_dbg(vsp1->dev, "%s: set selection (%u,%u)/%ux%u on %s pad %u\n", + __func__, sel.r.left, sel.r.top, sel.r.width, sel.r.height, + BRX_NAME(pipe->brx), sel.pad); + + return 0; +} + +/* Setup the BRx source pad. */ +static int vsp1_du_pipeline_setup_inputs(struct vsp1_device *vsp1, + struct vsp1_pipeline *pipe); +static void vsp1_du_pipeline_configure(struct vsp1_pipeline *pipe); + +static int vsp1_du_pipeline_setup_brx(struct vsp1_device *vsp1, + struct vsp1_pipeline *pipe) +{ + struct vsp1_drm_pipeline *drm_pipe = to_vsp1_drm_pipeline(pipe); + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + struct vsp1_entity *brx; + int ret; + + /* + * Pick a BRx: + * - If we need more than two inputs, use the BRU. + * - Otherwise, if we are not forced to release our BRx, keep it. + * - Else, use any free BRx (randomly starting with the BRU). + */ + if (pipe->num_inputs > 2) + brx = &vsp1->bru->entity; + else if (pipe->brx && !drm_pipe->force_brx_release) + brx = pipe->brx; + else if (vsp1_feature(vsp1, VSP1_HAS_BRU) && !vsp1->bru->entity.pipe) + brx = &vsp1->bru->entity; + else + brx = &vsp1->brs->entity; + + /* Switch BRx if needed. */ + if (brx != pipe->brx) { + struct vsp1_entity *released_brx = NULL; + + /* Release our BRx if we have one. */ + if (pipe->brx) { + dev_dbg(vsp1->dev, "%s: pipe %u: releasing %s\n", + __func__, pipe->lif->index, + BRX_NAME(pipe->brx)); + + /* + * The BRx might be acquired by the other pipeline in + * the next step. We must thus remove it from the list + * of entities for this pipeline. The other pipeline's + * hardware configuration will reconfigure the BRx + * routing. + * + * However, if the other pipeline doesn't acquire our + * BRx, we need to keep it in the list, otherwise the + * hardware configuration step won't disconnect it from + * the pipeline. To solve this, store the released BRx + * pointer to add it back to the list of entities later + * if it isn't acquired by the other pipeline. + */ + released_brx = pipe->brx; + + list_del(&pipe->brx->list_pipe); + pipe->brx->sink = NULL; + pipe->brx->pipe = NULL; + pipe->brx = NULL; + } + + /* + * If the BRx we need is in use, force the owner pipeline to + * switch to the other BRx and wait until the switch completes. + */ + if (brx->pipe) { + struct vsp1_drm_pipeline *owner_pipe; + + dev_dbg(vsp1->dev, "%s: pipe %u: waiting for %s\n", + __func__, pipe->lif->index, BRX_NAME(brx)); + + owner_pipe = to_vsp1_drm_pipeline(brx->pipe); + owner_pipe->force_brx_release = true; + + vsp1_du_pipeline_setup_inputs(vsp1, &owner_pipe->pipe); + vsp1_du_pipeline_configure(&owner_pipe->pipe); + + ret = wait_event_timeout(owner_pipe->wait_queue, + !owner_pipe->force_brx_release, + msecs_to_jiffies(500)); + if (ret == 0) + dev_warn(vsp1->dev, + "DRM pipeline %u reconfiguration timeout\n", + owner_pipe->pipe.lif->index); + } + + /* + * If the BRx we have released previously hasn't been acquired + * by the other pipeline, add it back to the entities list (with + * the pipe pointer NULL) to let vsp1_du_pipeline_configure() + * disconnect it from the hardware pipeline. + */ + if (released_brx && !released_brx->pipe) + list_add_tail(&released_brx->list_pipe, + &pipe->entities); + + /* Add the BRx to the pipeline. */ + dev_dbg(vsp1->dev, "%s: pipe %u: acquired %s\n", + __func__, pipe->lif->index, BRX_NAME(brx)); + + pipe->brx = brx; + pipe->brx->pipe = pipe; + pipe->brx->sink = &pipe->output->entity; + pipe->brx->sink_pad = 0; + + list_add_tail(&pipe->brx->list_pipe, &pipe->entities); + } + + /* + * Configure the format on the BRx source and verify that it matches the + * requested format. We don't set the media bus code as it is configured + * on the BRx sink pad 0 and propagated inside the entity, not on the + * source pad. + */ + format.pad = brx->source_pad; + format.format.width = drm_pipe->width; + format.format.height = drm_pipe->height; + format.format.field = V4L2_FIELD_NONE; + + ret = v4l2_subdev_call(&brx->subdev, pad, set_fmt, NULL, + &format); + if (ret < 0) + return ret; + + dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n", + __func__, format.format.width, format.format.height, + format.format.code, BRX_NAME(brx), brx->source_pad); + + if (format.format.width != drm_pipe->width || + format.format.height != drm_pipe->height) { + dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__); + return -EPIPE; + } + + return 0; +} + +static unsigned int rpf_zpos(struct vsp1_device *vsp1, struct vsp1_rwpf *rpf) +{ + return vsp1->drm->inputs[rpf->entity.index].zpos; +} + +/* Setup the input side of the pipeline (RPFs and BRx). */ +static int vsp1_du_pipeline_setup_inputs(struct vsp1_device *vsp1, + struct vsp1_pipeline *pipe) +{ + struct vsp1_drm_pipeline *drm_pipe = to_vsp1_drm_pipeline(pipe); + struct vsp1_rwpf *inputs[VSP1_MAX_RPF] = { NULL, }; + struct vsp1_entity *uif; + bool use_uif = false; + struct vsp1_brx *brx; + unsigned int i; + int ret; + + /* Count the number of enabled inputs and sort them by Z-order. */ + pipe->num_inputs = 0; + + for (i = 0; i < vsp1->info->rpf_count; ++i) { + struct vsp1_rwpf *rpf = vsp1->rpf[i]; + unsigned int j; + + if (!pipe->inputs[i]) + continue; + + /* Insert the RPF in the sorted RPFs array. */ + for (j = pipe->num_inputs++; j > 0; --j) { + if (rpf_zpos(vsp1, inputs[j-1]) <= rpf_zpos(vsp1, rpf)) + break; + inputs[j] = inputs[j-1]; + } + + inputs[j] = rpf; + } + + /* + * Setup the BRx. This must be done before setting up the RPF input + * pipelines as the BRx sink compose rectangles depend on the BRx source + * format. + */ + ret = vsp1_du_pipeline_setup_brx(vsp1, pipe); + if (ret < 0) { + dev_err(vsp1->dev, "%s: failed to setup %s source\n", __func__, + BRX_NAME(pipe->brx)); + return ret; + } + + brx = to_brx(&pipe->brx->subdev); + + /* Setup the RPF input pipeline for every enabled input. */ + for (i = 0; i < pipe->brx->source_pad; ++i) { + struct vsp1_rwpf *rpf = inputs[i]; + + if (!rpf) { + brx->inputs[i].rpf = NULL; + continue; + } + + if (!rpf->entity.pipe) { + rpf->entity.pipe = pipe; + list_add_tail(&rpf->entity.list_pipe, &pipe->entities); + } + + brx->inputs[i].rpf = rpf; + rpf->brx_input = i; + rpf->entity.sink = pipe->brx; + rpf->entity.sink_pad = i; + + dev_dbg(vsp1->dev, "%s: connecting RPF.%u to %s:%u\n", + __func__, rpf->entity.index, BRX_NAME(pipe->brx), i); + + uif = drm_pipe->crc.source == VSP1_DU_CRC_PLANE && + drm_pipe->crc.index == i ? drm_pipe->uif : NULL; + if (uif) + use_uif = true; + ret = vsp1_du_pipeline_setup_rpf(vsp1, pipe, rpf, uif, i); + if (ret < 0) { + dev_err(vsp1->dev, + "%s: failed to setup RPF.%u\n", + __func__, rpf->entity.index); + return ret; + } + } + + /* Insert and configure the UIF at the BRx output if available. */ + uif = drm_pipe->crc.source == VSP1_DU_CRC_OUTPUT ? drm_pipe->uif : NULL; + if (uif) + use_uif = true; + ret = vsp1_du_insert_uif(vsp1, pipe, uif, + pipe->brx, pipe->brx->source_pad, + &pipe->output->entity, 0); + if (ret < 0) + dev_err(vsp1->dev, "%s: failed to setup UIF after %s\n", + __func__, BRX_NAME(pipe->brx)); + + /* If the DRM pipe does not have a UIF there is nothing we can update. */ + if (!drm_pipe->uif) + return 0; + + /* + * If the UIF is not in use schedule it for removal by setting its pipe + * pointer to NULL, vsp1_du_pipeline_configure() will remove it from the + * hardware pipeline and from the pipeline's list of entities. Otherwise + * make sure it is present in the pipeline's list of entities if it + * wasn't already. + */ + if (!use_uif) { + drm_pipe->uif->pipe = NULL; + } else if (!drm_pipe->uif->pipe) { + drm_pipe->uif->pipe = pipe; + list_add_tail(&drm_pipe->uif->list_pipe, &pipe->entities); + } + + return 0; +} + +/* Setup the output side of the pipeline (WPF and LIF). */ +static int vsp1_du_pipeline_setup_output(struct vsp1_device *vsp1, + struct vsp1_pipeline *pipe) +{ + struct vsp1_drm_pipeline *drm_pipe = to_vsp1_drm_pipeline(pipe); + struct v4l2_subdev_format format = { 0, }; + int ret; + + format.which = V4L2_SUBDEV_FORMAT_ACTIVE; + format.pad = RWPF_PAD_SINK; + format.format.width = drm_pipe->width; + format.format.height = drm_pipe->height; + format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32; + format.format.field = V4L2_FIELD_NONE; + + ret = v4l2_subdev_call(&pipe->output->entity.subdev, pad, set_fmt, NULL, + &format); + if (ret < 0) + return ret; + + dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on WPF%u sink\n", + __func__, format.format.width, format.format.height, + format.format.code, pipe->output->entity.index); + + format.pad = RWPF_PAD_SOURCE; + ret = v4l2_subdev_call(&pipe->output->entity.subdev, pad, get_fmt, NULL, + &format); + if (ret < 0) + return ret; + + dev_dbg(vsp1->dev, "%s: got format %ux%u (%x) on WPF%u source\n", + __func__, format.format.width, format.format.height, + format.format.code, pipe->output->entity.index); + + format.pad = LIF_PAD_SINK; + ret = v4l2_subdev_call(&pipe->lif->subdev, pad, set_fmt, NULL, + &format); + if (ret < 0) + return ret; + + dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on LIF%u sink\n", + __func__, format.format.width, format.format.height, + format.format.code, pipe->lif->index); + + /* + * Verify that the format at the output of the pipeline matches the + * requested frame size and media bus code. + */ + if (format.format.width != drm_pipe->width || + format.format.height != drm_pipe->height || + format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) { + dev_dbg(vsp1->dev, "%s: format mismatch on LIF%u\n", __func__, + pipe->lif->index); + return -EPIPE; + } + + return 0; +} + +/* Configure all entities in the pipeline. */ +static void vsp1_du_pipeline_configure(struct vsp1_pipeline *pipe) +{ + struct vsp1_drm_pipeline *drm_pipe = to_vsp1_drm_pipeline(pipe); + struct vsp1_entity *entity; + struct vsp1_entity *next; + struct vsp1_dl_list *dl; + struct vsp1_dl_body *dlb; + unsigned int dl_flags = 0; + + if (drm_pipe->force_brx_release) + dl_flags |= VSP1_DL_FRAME_END_INTERNAL; + if (pipe->output->writeback) + dl_flags |= VSP1_DL_FRAME_END_WRITEBACK; + + dl = vsp1_dl_list_get(pipe->output->dlm); + dlb = vsp1_dl_list_get_body0(dl); + + list_for_each_entry_safe(entity, next, &pipe->entities, list_pipe) { + /* Disconnect unused entities from the pipeline. */ + if (!entity->pipe) { + vsp1_dl_body_write(dlb, entity->route->reg, + VI6_DPR_NODE_UNUSED); + + entity->sink = NULL; + list_del(&entity->list_pipe); + + continue; + } + + vsp1_entity_route_setup(entity, pipe, dlb); + vsp1_entity_configure_stream(entity, pipe, dl, dlb); + vsp1_entity_configure_frame(entity, pipe, dl, dlb); + vsp1_entity_configure_partition(entity, pipe, dl, dlb); + } + + vsp1_dl_list_commit(dl, dl_flags); +} + +static int vsp1_du_pipeline_set_rwpf_format(struct vsp1_device *vsp1, + struct vsp1_rwpf *rwpf, + u32 pixelformat, unsigned int pitch) +{ + const struct vsp1_format_info *fmtinfo; + unsigned int chroma_hsub; + + fmtinfo = vsp1_get_format_info(vsp1, pixelformat); + if (!fmtinfo) { + dev_dbg(vsp1->dev, "Unsupported pixel format %08x\n", + pixelformat); + return -EINVAL; + } + + /* + * Only formats with three planes can affect the chroma planes pitch. + * All formats with two planes have a horizontal subsampling value of 2, + * but combine U and V in a single chroma plane, which thus results in + * the luma plane and chroma plane having the same pitch. + */ + chroma_hsub = (fmtinfo->planes == 3) ? fmtinfo->hsub : 1; + + rwpf->fmtinfo = fmtinfo; + rwpf->format.num_planes = fmtinfo->planes; + rwpf->format.plane_fmt[0].bytesperline = pitch; + rwpf->format.plane_fmt[1].bytesperline = pitch / chroma_hsub; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * DU Driver API + */ + +int vsp1_du_init(struct device *dev) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + + if (!vsp1) + return -EPROBE_DEFER; + + return 0; +} +EXPORT_SYMBOL_GPL(vsp1_du_init); + +/** + * vsp1_du_setup_lif - Setup the output part of the VSP pipeline + * @dev: the VSP device + * @pipe_index: the DRM pipeline index + * @cfg: the LIF configuration + * + * Configure the output part of VSP DRM pipeline for the given frame @cfg.width + * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink and + * source pads, and the LIF sink pad. + * + * The @pipe_index argument selects which DRM pipeline to setup. The number of + * available pipelines depend on the VSP instance. + * + * As the media bus code on the blend unit source pad is conditioned by the + * configuration of its sink 0 pad, we also set up the formats on all blend unit + * sinks, even if the configuration will be overwritten later by + * vsp1_du_setup_rpf(). This ensures that the blend unit configuration is set to + * a well defined state. + * + * Return 0 on success or a negative error code on failure. + */ +int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index, + const struct vsp1_du_lif_config *cfg) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + struct vsp1_drm_pipeline *drm_pipe; + struct vsp1_pipeline *pipe; + unsigned long flags; + unsigned int i; + int ret; + + if (pipe_index >= vsp1->info->lif_count) + return -EINVAL; + + drm_pipe = &vsp1->drm->pipe[pipe_index]; + pipe = &drm_pipe->pipe; + + if (!cfg) { + struct vsp1_brx *brx; + + mutex_lock(&vsp1->drm->lock); + + brx = to_brx(&pipe->brx->subdev); + + /* + * NULL configuration means the CRTC is being disabled, stop + * the pipeline and turn the light off. + */ + ret = vsp1_pipeline_stop(pipe); + if (ret == -ETIMEDOUT) + dev_err(vsp1->dev, "DRM pipeline stop timeout\n"); + + for (i = 0; i < ARRAY_SIZE(pipe->inputs); ++i) { + struct vsp1_rwpf *rpf = pipe->inputs[i]; + + if (!rpf) + continue; + + /* + * Remove the RPF from the pipe and the list of BRx + * inputs. + */ + WARN_ON(!rpf->entity.pipe); + rpf->entity.pipe = NULL; + list_del(&rpf->entity.list_pipe); + pipe->inputs[i] = NULL; + + brx->inputs[rpf->brx_input].rpf = NULL; + } + + drm_pipe->du_complete = NULL; + pipe->num_inputs = 0; + + dev_dbg(vsp1->dev, "%s: pipe %u: releasing %s\n", + __func__, pipe->lif->index, + BRX_NAME(pipe->brx)); + + list_del(&pipe->brx->list_pipe); + pipe->brx->pipe = NULL; + pipe->brx = NULL; + + mutex_unlock(&vsp1->drm->lock); + + vsp1_dlm_reset(pipe->output->dlm); + vsp1_device_put(vsp1); + + dev_dbg(vsp1->dev, "%s: pipeline disabled\n", __func__); + + return 0; + } + + drm_pipe->width = cfg->width; + drm_pipe->height = cfg->height; + pipe->interlaced = cfg->interlaced; + + dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u%s\n", + __func__, pipe_index, cfg->width, cfg->height, + pipe->interlaced ? "i" : ""); + + mutex_lock(&vsp1->drm->lock); + + /* Setup formats through the pipeline. */ + ret = vsp1_du_pipeline_setup_inputs(vsp1, pipe); + if (ret < 0) + goto unlock; + + ret = vsp1_du_pipeline_setup_output(vsp1, pipe); + if (ret < 0) + goto unlock; + + /* Enable the VSP1. */ + ret = vsp1_device_get(vsp1); + if (ret < 0) + goto unlock; + + /* + * Register a callback to allow us to notify the DRM driver of frame + * completion events. + */ + drm_pipe->du_complete = cfg->callback; + drm_pipe->du_private = cfg->callback_data; + + /* Disable the display interrupts. */ + vsp1_write(vsp1, VI6_DISP_IRQ_STA(pipe_index), 0); + vsp1_write(vsp1, VI6_DISP_IRQ_ENB(pipe_index), 0); + + /* Configure all entities in the pipeline. */ + vsp1_du_pipeline_configure(pipe); + +unlock: + mutex_unlock(&vsp1->drm->lock); + + if (ret < 0) + return ret; + + /* Start the pipeline. */ + spin_lock_irqsave(&pipe->irqlock, flags); + vsp1_pipeline_run(pipe); + spin_unlock_irqrestore(&pipe->irqlock, flags); + + dev_dbg(vsp1->dev, "%s: pipeline enabled\n", __func__); + + return 0; +} +EXPORT_SYMBOL_GPL(vsp1_du_setup_lif); + +/** + * vsp1_du_atomic_begin - Prepare for an atomic update + * @dev: the VSP device + * @pipe_index: the DRM pipeline index + */ +void vsp1_du_atomic_begin(struct device *dev, unsigned int pipe_index) +{ +} +EXPORT_SYMBOL_GPL(vsp1_du_atomic_begin); + +/** + * vsp1_du_atomic_update - Setup one RPF input of the VSP pipeline + * @dev: the VSP device + * @pipe_index: the DRM pipeline index + * @rpf_index: index of the RPF to setup (0-based) + * @cfg: the RPF configuration + * + * Configure the VSP to perform image composition through RPF @rpf_index as + * described by the @cfg configuration. The image to compose is referenced by + * @cfg.mem and composed using the @cfg.src crop rectangle and the @cfg.dst + * composition rectangle. The Z-order is configurable with higher @zpos values + * displayed on top. + * + * If the @cfg configuration is NULL, the RPF will be disabled. Calling the + * function on a disabled RPF is allowed. + * + * Image format as stored in memory is expressed as a V4L2 @cfg.pixelformat + * value. The memory pitch is configurable to allow for padding at end of lines, + * or simply for images that extend beyond the crop rectangle boundaries. The + * @cfg.pitch value is expressed in bytes and applies to all planes for + * multiplanar formats. + * + * The source memory buffer is referenced by the DMA address of its planes in + * the @cfg.mem array. Up to two planes are supported. The second plane DMA + * address is ignored for formats using a single plane. + * + * This function isn't reentrant, the caller needs to serialize calls. + * + * Return 0 on success or a negative error code on failure. + */ +int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index, + unsigned int rpf_index, + const struct vsp1_du_atomic_config *cfg) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + struct vsp1_drm_pipeline *drm_pipe = &vsp1->drm->pipe[pipe_index]; + struct vsp1_rwpf *rpf; + int ret; + + if (rpf_index >= vsp1->info->rpf_count) + return -EINVAL; + + rpf = vsp1->rpf[rpf_index]; + + if (!cfg) { + dev_dbg(vsp1->dev, "%s: RPF%u: disable requested\n", __func__, + rpf_index); + + /* + * Remove the RPF from the pipeline's inputs. Keep it in the + * pipeline's entity list to let vsp1_du_pipeline_configure() + * remove it from the hardware pipeline. + */ + rpf->entity.pipe = NULL; + drm_pipe->pipe.inputs[rpf_index] = NULL; + return 0; + } + + dev_dbg(vsp1->dev, + "%s: RPF%u: (%u,%u)/%ux%u -> (%u,%u)/%ux%u (%08x), pitch %u dma { %pad, %pad, %pad } zpos %u\n", + __func__, rpf_index, + cfg->src.left, cfg->src.top, cfg->src.width, cfg->src.height, + cfg->dst.left, cfg->dst.top, cfg->dst.width, cfg->dst.height, + cfg->pixelformat, cfg->pitch, &cfg->mem[0], &cfg->mem[1], + &cfg->mem[2], cfg->zpos); + + /* + * Store the format, stride, memory buffer address, crop and compose + * rectangles and Z-order position and for the input. + */ + ret = vsp1_du_pipeline_set_rwpf_format(vsp1, rpf, cfg->pixelformat, + cfg->pitch); + if (ret < 0) + return ret; + + rpf->alpha = cfg->alpha; + + rpf->mem.addr[0] = cfg->mem[0]; + rpf->mem.addr[1] = cfg->mem[1]; + rpf->mem.addr[2] = cfg->mem[2]; + + rpf->format.flags = cfg->premult ? V4L2_PIX_FMT_FLAG_PREMUL_ALPHA : 0; + + vsp1->drm->inputs[rpf_index].crop = cfg->src; + vsp1->drm->inputs[rpf_index].compose = cfg->dst; + vsp1->drm->inputs[rpf_index].zpos = cfg->zpos; + + drm_pipe->pipe.inputs[rpf_index] = rpf; + + return 0; +} +EXPORT_SYMBOL_GPL(vsp1_du_atomic_update); + +/** + * vsp1_du_atomic_flush - Commit an atomic update + * @dev: the VSP device + * @pipe_index: the DRM pipeline index + * @cfg: atomic pipe configuration + */ +void vsp1_du_atomic_flush(struct device *dev, unsigned int pipe_index, + const struct vsp1_du_atomic_pipe_config *cfg) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + struct vsp1_drm_pipeline *drm_pipe = &vsp1->drm->pipe[pipe_index]; + struct vsp1_pipeline *pipe = &drm_pipe->pipe; + int ret; + + drm_pipe->crc = cfg->crc; + + mutex_lock(&vsp1->drm->lock); + + if (cfg->writeback.pixelformat) { + const struct vsp1_du_writeback_config *wb_cfg = &cfg->writeback; + + ret = vsp1_du_pipeline_set_rwpf_format(vsp1, pipe->output, + wb_cfg->pixelformat, + wb_cfg->pitch); + if (WARN_ON(ret < 0)) + goto done; + + pipe->output->mem.addr[0] = wb_cfg->mem[0]; + pipe->output->mem.addr[1] = wb_cfg->mem[1]; + pipe->output->mem.addr[2] = wb_cfg->mem[2]; + pipe->output->writeback = true; + } + + vsp1_du_pipeline_setup_inputs(vsp1, pipe); + vsp1_du_pipeline_configure(pipe); + +done: + mutex_unlock(&vsp1->drm->lock); +} +EXPORT_SYMBOL_GPL(vsp1_du_atomic_flush); + +int vsp1_du_map_sg(struct device *dev, struct sg_table *sgt) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + + /* + * As all the buffers allocated by the DU driver are coherent, we can + * skip cache sync. This will need to be revisited when support for + * non-coherent buffers will be added to the DU driver. + */ + return dma_map_sgtable(vsp1->bus_master, sgt, DMA_TO_DEVICE, + DMA_ATTR_SKIP_CPU_SYNC); +} +EXPORT_SYMBOL_GPL(vsp1_du_map_sg); + +void vsp1_du_unmap_sg(struct device *dev, struct sg_table *sgt) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + + dma_unmap_sgtable(vsp1->bus_master, sgt, DMA_TO_DEVICE, + DMA_ATTR_SKIP_CPU_SYNC); +} +EXPORT_SYMBOL_GPL(vsp1_du_unmap_sg); + +/* ----------------------------------------------------------------------------- + * Initialization + */ + +int vsp1_drm_init(struct vsp1_device *vsp1) +{ + unsigned int i; + + vsp1->drm = devm_kzalloc(vsp1->dev, sizeof(*vsp1->drm), GFP_KERNEL); + if (!vsp1->drm) + return -ENOMEM; + + mutex_init(&vsp1->drm->lock); + + /* Create one DRM pipeline per LIF. */ + for (i = 0; i < vsp1->info->lif_count; ++i) { + struct vsp1_drm_pipeline *drm_pipe = &vsp1->drm->pipe[i]; + struct vsp1_pipeline *pipe = &drm_pipe->pipe; + + init_waitqueue_head(&drm_pipe->wait_queue); + + vsp1_pipeline_init(pipe); + + pipe->frame_end = vsp1_du_pipeline_frame_end; + + /* + * The output side of the DRM pipeline is static, add the + * corresponding entities manually. + */ + pipe->output = vsp1->wpf[i]; + pipe->lif = &vsp1->lif[i]->entity; + + pipe->output->entity.pipe = pipe; + pipe->output->entity.sink = pipe->lif; + pipe->output->entity.sink_pad = 0; + list_add_tail(&pipe->output->entity.list_pipe, &pipe->entities); + + pipe->lif->pipe = pipe; + list_add_tail(&pipe->lif->list_pipe, &pipe->entities); + + /* + * CRC computation is initially disabled, don't add the UIF to + * the pipeline. + */ + if (i < vsp1->info->uif_count) + drm_pipe->uif = &vsp1->uif[i]->entity; + } + + /* Disable all RPFs initially. */ + for (i = 0; i < vsp1->info->rpf_count; ++i) { + struct vsp1_rwpf *input = vsp1->rpf[i]; + + INIT_LIST_HEAD(&input->entity.list_pipe); + } + + return 0; +} + +void vsp1_drm_cleanup(struct vsp1_device *vsp1) +{ + mutex_destroy(&vsp1->drm->lock); +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_drm.h b/drivers/media/platform/renesas/vsp1/vsp1_drm.h new file mode 100644 index 000000000..ab8b7e316 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_drm.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_drm.h -- R-Car VSP1 DRM/KMS Interface + * + * Copyright (C) 2015 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_DRM_H__ +#define __VSP1_DRM_H__ + +#include <linux/mutex.h> +#include <linux/videodev2.h> +#include <linux/wait.h> + +#include <media/vsp1.h> + +#include "vsp1_pipe.h" + +/** + * struct vsp1_drm_pipeline - State for the API exposed to the DRM driver + * @pipe: the VSP1 pipeline used for display + * @width: output display width + * @height: output display height + * @force_brx_release: when set, release the BRx during the next reconfiguration + * @wait_queue: wait queue to wait for BRx release completion + * @uif: UIF entity if available for the pipeline + * @crc: CRC computation configuration + * @du_complete: frame completion callback for the DU driver (optional) + * @du_private: data to be passed to the du_complete callback + */ +struct vsp1_drm_pipeline { + struct vsp1_pipeline pipe; + + unsigned int width; + unsigned int height; + + bool force_brx_release; + wait_queue_head_t wait_queue; + + struct vsp1_entity *uif; + struct vsp1_du_crc_config crc; + + /* Frame synchronisation */ + void (*du_complete)(void *data, unsigned int status, u32 crc); + void *du_private; +}; + +/** + * struct vsp1_drm - State for the API exposed to the DRM driver + * @pipe: the VSP1 DRM pipeline used for display + * @lock: protects the BRU and BRS allocation + * @inputs: source crop rectangle, destination compose rectangle and z-order + * position for every input (indexed by RPF index) + */ +struct vsp1_drm { + struct vsp1_drm_pipeline pipe[VSP1_MAX_LIF]; + struct mutex lock; + + struct { + struct v4l2_rect crop; + struct v4l2_rect compose; + unsigned int zpos; + } inputs[VSP1_MAX_RPF]; +}; + +static inline struct vsp1_drm_pipeline * +to_vsp1_drm_pipeline(struct vsp1_pipeline *pipe) +{ + return container_of(pipe, struct vsp1_drm_pipeline, pipe); +} + +int vsp1_drm_init(struct vsp1_device *vsp1); +void vsp1_drm_cleanup(struct vsp1_device *vsp1); + +#endif /* __VSP1_DRM_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_drv.c b/drivers/media/platform/renesas/vsp1/vsp1_drv.c new file mode 100644 index 000000000..c260d318d --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_drv.c @@ -0,0 +1,1015 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_drv.c -- R-Car VSP1 Driver + * + * Copyright (C) 2013-2015 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> +#include <linux/videodev2.h> + +#include <media/rcar-fcp.h> +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_brx.h" +#include "vsp1_clu.h" +#include "vsp1_dl.h" +#include "vsp1_drm.h" +#include "vsp1_hgo.h" +#include "vsp1_hgt.h" +#include "vsp1_hsit.h" +#include "vsp1_lif.h" +#include "vsp1_lut.h" +#include "vsp1_pipe.h" +#include "vsp1_rwpf.h" +#include "vsp1_sru.h" +#include "vsp1_uds.h" +#include "vsp1_uif.h" +#include "vsp1_video.h" + +/* ----------------------------------------------------------------------------- + * Interrupt Handling + */ + +static irqreturn_t vsp1_irq_handler(int irq, void *data) +{ + u32 mask = VI6_WPF_IRQ_STA_DFE | VI6_WPF_IRQ_STA_FRE; + struct vsp1_device *vsp1 = data; + irqreturn_t ret = IRQ_NONE; + unsigned int i; + u32 status; + + for (i = 0; i < vsp1->info->wpf_count; ++i) { + struct vsp1_rwpf *wpf = vsp1->wpf[i]; + + if (wpf == NULL) + continue; + + status = vsp1_read(vsp1, VI6_WPF_IRQ_STA(i)); + vsp1_write(vsp1, VI6_WPF_IRQ_STA(i), ~status & mask); + + if (status & VI6_WPF_IRQ_STA_DFE) { + vsp1_pipeline_frame_end(wpf->entity.pipe); + ret = IRQ_HANDLED; + } + } + + return ret; +} + +/* ----------------------------------------------------------------------------- + * Entities + */ + +/* + * vsp1_create_sink_links - Create links from all sources to the given sink + * + * This function creates media links from all valid sources to the given sink + * pad. Links that would be invalid according to the VSP1 hardware capabilities + * are skipped. Those include all links + * + * - from a UDS to a UDS (UDS entities can't be chained) + * - from an entity to itself (no loops are allowed) + * + * Furthermore, the BRS can't be connected to histogram generators, but no + * special check is currently needed as all VSP instances that include a BRS + * have no histogram generator. + */ +static int vsp1_create_sink_links(struct vsp1_device *vsp1, + struct vsp1_entity *sink) +{ + struct media_entity *entity = &sink->subdev.entity; + struct vsp1_entity *source; + unsigned int pad; + int ret; + + list_for_each_entry(source, &vsp1->entities, list_dev) { + u32 flags; + + if (source->type == sink->type) + continue; + + if (source->type == VSP1_ENTITY_HGO || + source->type == VSP1_ENTITY_HGT || + source->type == VSP1_ENTITY_LIF || + source->type == VSP1_ENTITY_WPF) + continue; + + flags = source->type == VSP1_ENTITY_RPF && + sink->type == VSP1_ENTITY_WPF && + source->index == sink->index + ? MEDIA_LNK_FL_ENABLED : 0; + + for (pad = 0; pad < entity->num_pads; ++pad) { + if (!(entity->pads[pad].flags & MEDIA_PAD_FL_SINK)) + continue; + + ret = media_create_pad_link(&source->subdev.entity, + source->source_pad, + entity, pad, flags); + if (ret < 0) + return ret; + + if (flags & MEDIA_LNK_FL_ENABLED) + source->sink = sink; + } + } + + return 0; +} + +static int vsp1_uapi_create_links(struct vsp1_device *vsp1) +{ + struct vsp1_entity *entity; + unsigned int i; + int ret; + + list_for_each_entry(entity, &vsp1->entities, list_dev) { + if (entity->type == VSP1_ENTITY_LIF || + entity->type == VSP1_ENTITY_RPF) + continue; + + ret = vsp1_create_sink_links(vsp1, entity); + if (ret < 0) + return ret; + } + + if (vsp1->hgo) { + ret = media_create_pad_link(&vsp1->hgo->histo.entity.subdev.entity, + HISTO_PAD_SOURCE, + &vsp1->hgo->histo.video.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret < 0) + return ret; + } + + if (vsp1->hgt) { + ret = media_create_pad_link(&vsp1->hgt->histo.entity.subdev.entity, + HISTO_PAD_SOURCE, + &vsp1->hgt->histo.video.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret < 0) + return ret; + } + + for (i = 0; i < vsp1->info->lif_count; ++i) { + if (!vsp1->lif[i]) + continue; + + ret = media_create_pad_link(&vsp1->wpf[i]->entity.subdev.entity, + RWPF_PAD_SOURCE, + &vsp1->lif[i]->entity.subdev.entity, + LIF_PAD_SINK, 0); + if (ret < 0) + return ret; + } + + for (i = 0; i < vsp1->info->rpf_count; ++i) { + struct vsp1_rwpf *rpf = vsp1->rpf[i]; + + ret = media_create_pad_link(&rpf->video->video.entity, 0, + &rpf->entity.subdev.entity, + RWPF_PAD_SINK, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret < 0) + return ret; + } + + for (i = 0; i < vsp1->info->wpf_count; ++i) { + /* + * Connect the video device to the WPF. All connections are + * immutable. + */ + struct vsp1_rwpf *wpf = vsp1->wpf[i]; + + ret = media_create_pad_link(&wpf->entity.subdev.entity, + RWPF_PAD_SOURCE, + &wpf->video->video.entity, 0, + MEDIA_LNK_FL_IMMUTABLE | + MEDIA_LNK_FL_ENABLED); + if (ret < 0) + return ret; + } + + return 0; +} + +static void vsp1_destroy_entities(struct vsp1_device *vsp1) +{ + struct vsp1_entity *entity, *_entity; + struct vsp1_video *video, *_video; + + list_for_each_entry_safe(entity, _entity, &vsp1->entities, list_dev) { + list_del(&entity->list_dev); + vsp1_entity_destroy(entity); + } + + list_for_each_entry_safe(video, _video, &vsp1->videos, list) { + list_del(&video->list); + vsp1_video_cleanup(video); + } + + v4l2_device_unregister(&vsp1->v4l2_dev); + if (vsp1->info->uapi) + media_device_unregister(&vsp1->media_dev); + media_device_cleanup(&vsp1->media_dev); + + if (!vsp1->info->uapi) + vsp1_drm_cleanup(vsp1); +} + +static int vsp1_create_entities(struct vsp1_device *vsp1) +{ + struct media_device *mdev = &vsp1->media_dev; + struct v4l2_device *vdev = &vsp1->v4l2_dev; + struct vsp1_entity *entity; + unsigned int i; + int ret; + + mdev->dev = vsp1->dev; + mdev->hw_revision = vsp1->version; + strscpy(mdev->model, vsp1->info->model, sizeof(mdev->model)); + media_device_init(mdev); + + vsp1->media_ops.link_setup = vsp1_entity_link_setup; + /* + * Don't perform link validation when the userspace API is disabled as + * the pipeline is configured internally by the driver in that case, and + * its configuration can thus be trusted. + */ + if (vsp1->info->uapi) + vsp1->media_ops.link_validate = v4l2_subdev_link_validate; + + vdev->mdev = mdev; + ret = v4l2_device_register(vsp1->dev, vdev); + if (ret < 0) { + dev_err(vsp1->dev, "V4L2 device registration failed (%d)\n", + ret); + goto done; + } + + /* Instantiate all the entities. */ + if (vsp1_feature(vsp1, VSP1_HAS_BRS)) { + vsp1->brs = vsp1_brx_create(vsp1, VSP1_ENTITY_BRS); + if (IS_ERR(vsp1->brs)) { + ret = PTR_ERR(vsp1->brs); + goto done; + } + + list_add_tail(&vsp1->brs->entity.list_dev, &vsp1->entities); + } + + if (vsp1_feature(vsp1, VSP1_HAS_BRU)) { + vsp1->bru = vsp1_brx_create(vsp1, VSP1_ENTITY_BRU); + if (IS_ERR(vsp1->bru)) { + ret = PTR_ERR(vsp1->bru); + goto done; + } + + list_add_tail(&vsp1->bru->entity.list_dev, &vsp1->entities); + } + + if (vsp1_feature(vsp1, VSP1_HAS_CLU)) { + vsp1->clu = vsp1_clu_create(vsp1); + if (IS_ERR(vsp1->clu)) { + ret = PTR_ERR(vsp1->clu); + goto done; + } + + list_add_tail(&vsp1->clu->entity.list_dev, &vsp1->entities); + } + + vsp1->hsi = vsp1_hsit_create(vsp1, true); + if (IS_ERR(vsp1->hsi)) { + ret = PTR_ERR(vsp1->hsi); + goto done; + } + + list_add_tail(&vsp1->hsi->entity.list_dev, &vsp1->entities); + + vsp1->hst = vsp1_hsit_create(vsp1, false); + if (IS_ERR(vsp1->hst)) { + ret = PTR_ERR(vsp1->hst); + goto done; + } + + list_add_tail(&vsp1->hst->entity.list_dev, &vsp1->entities); + + if (vsp1_feature(vsp1, VSP1_HAS_HGO) && vsp1->info->uapi) { + vsp1->hgo = vsp1_hgo_create(vsp1); + if (IS_ERR(vsp1->hgo)) { + ret = PTR_ERR(vsp1->hgo); + goto done; + } + + list_add_tail(&vsp1->hgo->histo.entity.list_dev, + &vsp1->entities); + } + + if (vsp1_feature(vsp1, VSP1_HAS_HGT) && vsp1->info->uapi) { + vsp1->hgt = vsp1_hgt_create(vsp1); + if (IS_ERR(vsp1->hgt)) { + ret = PTR_ERR(vsp1->hgt); + goto done; + } + + list_add_tail(&vsp1->hgt->histo.entity.list_dev, + &vsp1->entities); + } + + /* + * The LIFs are only supported when used in conjunction with the DU, in + * which case the userspace API is disabled. If the userspace API is + * enabled skip the LIFs, even when present. + */ + if (!vsp1->info->uapi) { + for (i = 0; i < vsp1->info->lif_count; ++i) { + struct vsp1_lif *lif; + + lif = vsp1_lif_create(vsp1, i); + if (IS_ERR(lif)) { + ret = PTR_ERR(lif); + goto done; + } + + vsp1->lif[i] = lif; + list_add_tail(&lif->entity.list_dev, &vsp1->entities); + } + } + + if (vsp1_feature(vsp1, VSP1_HAS_LUT)) { + vsp1->lut = vsp1_lut_create(vsp1); + if (IS_ERR(vsp1->lut)) { + ret = PTR_ERR(vsp1->lut); + goto done; + } + + list_add_tail(&vsp1->lut->entity.list_dev, &vsp1->entities); + } + + for (i = 0; i < vsp1->info->rpf_count; ++i) { + struct vsp1_rwpf *rpf; + + rpf = vsp1_rpf_create(vsp1, i); + if (IS_ERR(rpf)) { + ret = PTR_ERR(rpf); + goto done; + } + + vsp1->rpf[i] = rpf; + list_add_tail(&rpf->entity.list_dev, &vsp1->entities); + + if (vsp1->info->uapi) { + struct vsp1_video *video = vsp1_video_create(vsp1, rpf); + + if (IS_ERR(video)) { + ret = PTR_ERR(video); + goto done; + } + + list_add_tail(&video->list, &vsp1->videos); + } + } + + if (vsp1_feature(vsp1, VSP1_HAS_SRU)) { + vsp1->sru = vsp1_sru_create(vsp1); + if (IS_ERR(vsp1->sru)) { + ret = PTR_ERR(vsp1->sru); + goto done; + } + + list_add_tail(&vsp1->sru->entity.list_dev, &vsp1->entities); + } + + for (i = 0; i < vsp1->info->uds_count; ++i) { + struct vsp1_uds *uds; + + uds = vsp1_uds_create(vsp1, i); + if (IS_ERR(uds)) { + ret = PTR_ERR(uds); + goto done; + } + + vsp1->uds[i] = uds; + list_add_tail(&uds->entity.list_dev, &vsp1->entities); + } + + for (i = 0; i < vsp1->info->uif_count; ++i) { + struct vsp1_uif *uif; + + uif = vsp1_uif_create(vsp1, i); + if (IS_ERR(uif)) { + ret = PTR_ERR(uif); + goto done; + } + + vsp1->uif[i] = uif; + list_add_tail(&uif->entity.list_dev, &vsp1->entities); + } + + for (i = 0; i < vsp1->info->wpf_count; ++i) { + struct vsp1_rwpf *wpf; + + wpf = vsp1_wpf_create(vsp1, i); + if (IS_ERR(wpf)) { + ret = PTR_ERR(wpf); + goto done; + } + + vsp1->wpf[i] = wpf; + list_add_tail(&wpf->entity.list_dev, &vsp1->entities); + + if (vsp1->info->uapi) { + struct vsp1_video *video = vsp1_video_create(vsp1, wpf); + + if (IS_ERR(video)) { + ret = PTR_ERR(video); + goto done; + } + + list_add_tail(&video->list, &vsp1->videos); + } + } + + /* Register all subdevs. */ + list_for_each_entry(entity, &vsp1->entities, list_dev) { + ret = v4l2_device_register_subdev(&vsp1->v4l2_dev, + &entity->subdev); + if (ret < 0) + goto done; + } + + /* + * Create links and register subdev nodes if the userspace API is + * enabled or initialize the DRM pipeline otherwise. + */ + if (vsp1->info->uapi) { + ret = vsp1_uapi_create_links(vsp1); + if (ret < 0) + goto done; + + ret = v4l2_device_register_subdev_nodes(&vsp1->v4l2_dev); + if (ret < 0) + goto done; + + ret = media_device_register(mdev); + } else { + ret = vsp1_drm_init(vsp1); + } + +done: + if (ret < 0) + vsp1_destroy_entities(vsp1); + + return ret; +} + +int vsp1_reset_wpf(struct vsp1_device *vsp1, unsigned int index) +{ + unsigned int timeout; + u32 status; + + status = vsp1_read(vsp1, VI6_STATUS); + if (!(status & VI6_STATUS_SYS_ACT(index))) + return 0; + + vsp1_write(vsp1, VI6_SRESET, VI6_SRESET_SRTS(index)); + for (timeout = 10; timeout > 0; --timeout) { + status = vsp1_read(vsp1, VI6_STATUS); + if (!(status & VI6_STATUS_SYS_ACT(index))) + break; + + usleep_range(1000, 2000); + } + + if (!timeout) { + dev_err(vsp1->dev, "failed to reset wpf.%u\n", index); + return -ETIMEDOUT; + } + + return 0; +} + +static int vsp1_device_init(struct vsp1_device *vsp1) +{ + unsigned int i; + int ret; + + /* Reset any channel that might be running. */ + for (i = 0; i < vsp1->info->wpf_count; ++i) { + ret = vsp1_reset_wpf(vsp1, i); + if (ret < 0) + return ret; + } + + vsp1_write(vsp1, VI6_CLK_DCSWT, (8 << VI6_CLK_DCSWT_CSTPW_SHIFT) | + (8 << VI6_CLK_DCSWT_CSTRW_SHIFT)); + + for (i = 0; i < vsp1->info->rpf_count; ++i) + vsp1_write(vsp1, VI6_DPR_RPF_ROUTE(i), VI6_DPR_NODE_UNUSED); + + for (i = 0; i < vsp1->info->uds_count; ++i) + vsp1_write(vsp1, VI6_DPR_UDS_ROUTE(i), VI6_DPR_NODE_UNUSED); + + for (i = 0; i < vsp1->info->uif_count; ++i) + vsp1_write(vsp1, VI6_DPR_UIF_ROUTE(i), VI6_DPR_NODE_UNUSED); + + vsp1_write(vsp1, VI6_DPR_SRU_ROUTE, VI6_DPR_NODE_UNUSED); + vsp1_write(vsp1, VI6_DPR_LUT_ROUTE, VI6_DPR_NODE_UNUSED); + vsp1_write(vsp1, VI6_DPR_CLU_ROUTE, VI6_DPR_NODE_UNUSED); + vsp1_write(vsp1, VI6_DPR_HST_ROUTE, VI6_DPR_NODE_UNUSED); + vsp1_write(vsp1, VI6_DPR_HSI_ROUTE, VI6_DPR_NODE_UNUSED); + vsp1_write(vsp1, VI6_DPR_BRU_ROUTE, VI6_DPR_NODE_UNUSED); + + if (vsp1_feature(vsp1, VSP1_HAS_BRS)) + vsp1_write(vsp1, VI6_DPR_ILV_BRS_ROUTE, VI6_DPR_NODE_UNUSED); + + vsp1_write(vsp1, VI6_DPR_HGO_SMPPT, (7 << VI6_DPR_SMPPT_TGW_SHIFT) | + (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT)); + vsp1_write(vsp1, VI6_DPR_HGT_SMPPT, (7 << VI6_DPR_SMPPT_TGW_SHIFT) | + (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT)); + + vsp1_dlm_setup(vsp1); + + return 0; +} + +static void vsp1_mask_all_interrupts(struct vsp1_device *vsp1) +{ + unsigned int i; + + for (i = 0; i < vsp1->info->lif_count; ++i) + vsp1_write(vsp1, VI6_DISP_IRQ_ENB(i), 0); + for (i = 0; i < vsp1->info->wpf_count; ++i) + vsp1_write(vsp1, VI6_WPF_IRQ_ENB(i), 0); +} + +/* + * vsp1_device_get - Acquire the VSP1 device + * + * Make sure the device is not suspended and initialize it if needed. + * + * Return 0 on success or a negative error code otherwise. + */ +int vsp1_device_get(struct vsp1_device *vsp1) +{ + return pm_runtime_resume_and_get(vsp1->dev); +} + +/* + * vsp1_device_put - Release the VSP1 device + * + * Decrement the VSP1 reference count and cleanup the device if the last + * reference is released. + */ +void vsp1_device_put(struct vsp1_device *vsp1) +{ + pm_runtime_put_sync(vsp1->dev); +} + +/* ----------------------------------------------------------------------------- + * Power Management + */ + +static int __maybe_unused vsp1_pm_suspend(struct device *dev) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + + /* + * When used as part of a display pipeline, the VSP is stopped and + * restarted explicitly by the DU. + */ + if (!vsp1->drm) + vsp1_video_suspend(vsp1); + + pm_runtime_force_suspend(vsp1->dev); + + return 0; +} + +static int __maybe_unused vsp1_pm_resume(struct device *dev) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + + pm_runtime_force_resume(vsp1->dev); + + /* + * When used as part of a display pipeline, the VSP is stopped and + * restarted explicitly by the DU. + */ + if (!vsp1->drm) + vsp1_video_resume(vsp1); + + return 0; +} + +static int __maybe_unused vsp1_pm_runtime_suspend(struct device *dev) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + + rcar_fcp_disable(vsp1->fcp); + reset_control_assert(vsp1->rstc); + + return 0; +} + +static int __maybe_unused vsp1_pm_runtime_resume(struct device *dev) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + int ret; + + ret = reset_control_deassert(vsp1->rstc); + if (ret < 0) + return ret; + + if (vsp1->info) { + /* + * On R-Car Gen2 and RZ/G1, vsp1 register access after deassert + * can cause lock-up. It is a special case and needs some delay + * to avoid this lock-up. + */ + if (vsp1->info->gen == 2) + udelay(1); + + ret = vsp1_device_init(vsp1); + if (ret < 0) + goto done; + } + + ret = rcar_fcp_enable(vsp1->fcp); + +done: + if (ret < 0) + reset_control_assert(vsp1->rstc); + + return ret; +} + +static const struct dev_pm_ops vsp1_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(vsp1_pm_suspend, vsp1_pm_resume) + SET_RUNTIME_PM_OPS(vsp1_pm_runtime_suspend, vsp1_pm_runtime_resume, NULL) +}; + +/* ----------------------------------------------------------------------------- + * Platform Driver + */ + +static const struct vsp1_device_info vsp1_device_infos[] = { + { + .version = VI6_IP_VERSION_MODEL_VSPS_H2, + .model = "VSP1-S", + .gen = 2, + .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO + | VSP1_HAS_HGT | VSP1_HAS_LUT | VSP1_HAS_SRU + | VSP1_HAS_WPF_VFLIP, + .rpf_count = 5, + .uds_count = 3, + .wpf_count = 4, + .num_bru_inputs = 4, + .uapi = true, + }, { + .version = VI6_IP_VERSION_MODEL_VSPR_H2, + .model = "VSP1-R", + .gen = 2, + .features = VSP1_HAS_BRU | VSP1_HAS_SRU | VSP1_HAS_WPF_VFLIP, + .rpf_count = 5, + .uds_count = 3, + .wpf_count = 4, + .num_bru_inputs = 4, + .uapi = true, + }, { + .version = VI6_IP_VERSION_MODEL_VSPD_GEN2, + .model = "VSP1-D", + .gen = 2, + .features = VSP1_HAS_BRU | VSP1_HAS_HGO | VSP1_HAS_LUT, + .lif_count = 1, + .rpf_count = 4, + .uds_count = 1, + .wpf_count = 1, + .num_bru_inputs = 4, + .uapi = true, + }, { + .version = VI6_IP_VERSION_MODEL_VSPS_M2, + .model = "VSP1-S", + .gen = 2, + .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO + | VSP1_HAS_HGT | VSP1_HAS_LUT | VSP1_HAS_SRU + | VSP1_HAS_WPF_VFLIP, + .rpf_count = 5, + .uds_count = 1, + .wpf_count = 4, + .num_bru_inputs = 4, + .uapi = true, + }, { + .version = VI6_IP_VERSION_MODEL_VSPS_V2H, + .model = "VSP1V-S", + .gen = 2, + .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_LUT + | VSP1_HAS_SRU | VSP1_HAS_WPF_VFLIP, + .rpf_count = 4, + .uds_count = 1, + .wpf_count = 4, + .num_bru_inputs = 4, + .uapi = true, + }, { + .version = VI6_IP_VERSION_MODEL_VSPD_V2H, + .model = "VSP1V-D", + .gen = 2, + .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_LUT, + .lif_count = 1, + .rpf_count = 4, + .uds_count = 1, + .wpf_count = 1, + .num_bru_inputs = 4, + .uapi = true, + }, { + .version = VI6_IP_VERSION_MODEL_VSPI_GEN3, + .model = "VSP2-I", + .gen = 3, + .features = VSP1_HAS_CLU | VSP1_HAS_HGO | VSP1_HAS_HGT + | VSP1_HAS_LUT | VSP1_HAS_SRU | VSP1_HAS_WPF_HFLIP + | VSP1_HAS_WPF_VFLIP, + .rpf_count = 1, + .uds_count = 1, + .wpf_count = 1, + .uapi = true, + }, { + .version = VI6_IP_VERSION_MODEL_VSPBD_GEN3, + .model = "VSP2-BD", + .gen = 3, + .features = VSP1_HAS_BRU | VSP1_HAS_WPF_VFLIP, + .rpf_count = 5, + .wpf_count = 1, + .num_bru_inputs = 5, + .uapi = true, + }, { + .version = VI6_IP_VERSION_MODEL_VSPBC_GEN3, + .model = "VSP2-BC", + .gen = 3, + .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO + | VSP1_HAS_LUT | VSP1_HAS_WPF_VFLIP, + .rpf_count = 5, + .wpf_count = 1, + .num_bru_inputs = 5, + .uapi = true, + }, { + .version = VI6_IP_VERSION_MODEL_VSPBS_GEN3, + .model = "VSP2-BS", + .gen = 3, + .features = VSP1_HAS_BRS | VSP1_HAS_WPF_VFLIP, + .rpf_count = 2, + .wpf_count = 1, + .uapi = true, + }, { + .version = VI6_IP_VERSION_MODEL_VSPD_GEN3, + .model = "VSP2-D", + .gen = 3, + .features = VSP1_HAS_BRU | VSP1_HAS_WPF_VFLIP | VSP1_HAS_EXT_DL, + .lif_count = 1, + .rpf_count = 5, + .uif_count = 1, + .wpf_count = 2, + .num_bru_inputs = 5, + }, { + .version = VI6_IP_VERSION_MODEL_VSPD_V3, + .model = "VSP2-D", + .soc = VI6_IP_VERSION_SOC_V3H, + .gen = 3, + .features = VSP1_HAS_BRS | VSP1_HAS_BRU, + .lif_count = 1, + .rpf_count = 5, + .uif_count = 1, + .wpf_count = 1, + .num_bru_inputs = 5, + }, { + .version = VI6_IP_VERSION_MODEL_VSPD_V3, + .model = "VSP2-D", + .soc = VI6_IP_VERSION_SOC_V3M, + .gen = 3, + .features = VSP1_HAS_BRS | VSP1_HAS_BRU | VSP1_HAS_NON_ZERO_LBA, + .lif_count = 1, + .rpf_count = 5, + .uif_count = 1, + .wpf_count = 1, + .num_bru_inputs = 5, + }, { + .version = VI6_IP_VERSION_MODEL_VSPDL_GEN3, + .model = "VSP2-DL", + .gen = 3, + .features = VSP1_HAS_BRS | VSP1_HAS_BRU | VSP1_HAS_EXT_DL, + .lif_count = 2, + .rpf_count = 5, + .uif_count = 2, + .wpf_count = 2, + .num_bru_inputs = 5, + }, { + .version = VI6_IP_VERSION_MODEL_VSPD_V3U, + .model = "VSP2-D", + .gen = 3, + .features = VSP1_HAS_BRU | VSP1_HAS_EXT_DL, + .lif_count = 1, + .rpf_count = 5, + .uif_count = 2, + .wpf_count = 1, + .num_bru_inputs = 5, + }, +}; + +static const struct vsp1_device_info rzg2l_vsp2_device_info = { + .version = VI6_IP_VERSION_MODEL_VSPD_RZG2L, + .model = "VSP2-D", + .soc = VI6_IP_VERSION_SOC_RZG2L, + .gen = 3, + .features = VSP1_HAS_BRS | VSP1_HAS_WPF_VFLIP | VSP1_HAS_EXT_DL + | VSP1_HAS_NON_ZERO_LBA, + .lif_count = 1, + .rpf_count = 2, + .wpf_count = 1, +}; + +static const struct vsp1_device_info *vsp1_lookup_info(struct vsp1_device *vsp1) +{ + const struct vsp1_device_info *info; + unsigned int i; + u32 model; + u32 soc; + + /* + * Try the info stored in match data first for devices that don't have + * a version register. + */ + info = of_device_get_match_data(vsp1->dev); + if (info) { + vsp1->version = VI6_IP_VERSION_VSP_SW | info->version | info->soc; + return info; + } + + vsp1->version = vsp1_read(vsp1, VI6_IP_VERSION); + model = vsp1->version & VI6_IP_VERSION_MODEL_MASK; + soc = vsp1->version & VI6_IP_VERSION_SOC_MASK; + + for (i = 0; i < ARRAY_SIZE(vsp1_device_infos); ++i) { + info = &vsp1_device_infos[i]; + + if (model == info->version && (!info->soc || soc == info->soc)) + return info; + } + + dev_err(vsp1->dev, "unsupported IP version 0x%08x\n", vsp1->version); + + return NULL; +} + +static int vsp1_probe(struct platform_device *pdev) +{ + struct vsp1_device *vsp1; + struct device_node *fcp_node; + int ret; + int irq; + + vsp1 = devm_kzalloc(&pdev->dev, sizeof(*vsp1), GFP_KERNEL); + if (vsp1 == NULL) + return -ENOMEM; + + vsp1->dev = &pdev->dev; + INIT_LIST_HEAD(&vsp1->entities); + INIT_LIST_HEAD(&vsp1->videos); + + platform_set_drvdata(pdev, vsp1); + + /* I/O and IRQ resources (clock managed by the clock PM domain). */ + vsp1->mmio = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(vsp1->mmio)) + return PTR_ERR(vsp1->mmio); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + vsp1->rstc = devm_reset_control_get_shared(&pdev->dev, NULL); + if (IS_ERR(vsp1->rstc)) + return dev_err_probe(&pdev->dev, PTR_ERR(vsp1->rstc), + "failed to get reset control\n"); + + /* FCP (optional). */ + fcp_node = of_parse_phandle(pdev->dev.of_node, "renesas,fcp", 0); + if (fcp_node) { + vsp1->fcp = rcar_fcp_get(fcp_node); + of_node_put(fcp_node); + if (IS_ERR(vsp1->fcp)) { + dev_dbg(&pdev->dev, "FCP not found (%ld)\n", + PTR_ERR(vsp1->fcp)); + return PTR_ERR(vsp1->fcp); + } + + /* + * When the FCP is present, it handles all bus master accesses + * for the VSP and must thus be used in place of the VSP device + * to map DMA buffers. + */ + vsp1->bus_master = rcar_fcp_get_device(vsp1->fcp); + } else { + vsp1->bus_master = vsp1->dev; + } + + /* Configure device parameters based on the version register. */ + pm_runtime_enable(&pdev->dev); + + ret = vsp1_device_get(vsp1); + if (ret < 0) + goto done; + + vsp1->info = vsp1_lookup_info(vsp1); + if (!vsp1->info) { + vsp1_device_put(vsp1); + ret = -ENXIO; + goto done; + } + + dev_dbg(&pdev->dev, "IP version 0x%08x\n", vsp1->version); + + /* + * Previous use of the hardware (e.g. by the bootloader) could leave + * some interrupts enabled and pending. + * + * TODO: Investigate if this shouldn't be better handled by using the + * device reset provided by the CPG. + */ + vsp1_mask_all_interrupts(vsp1); + + vsp1_device_put(vsp1); + + ret = devm_request_irq(&pdev->dev, irq, vsp1_irq_handler, + IRQF_SHARED, dev_name(&pdev->dev), vsp1); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + goto done; + } + + /* Instantiate entities. */ + ret = vsp1_create_entities(vsp1); + if (ret < 0) { + dev_err(&pdev->dev, "failed to create entities\n"); + goto done; + } + +done: + if (ret) { + pm_runtime_disable(&pdev->dev); + rcar_fcp_put(vsp1->fcp); + } + + return ret; +} + +static int vsp1_remove(struct platform_device *pdev) +{ + struct vsp1_device *vsp1 = platform_get_drvdata(pdev); + + vsp1_destroy_entities(vsp1); + rcar_fcp_put(vsp1->fcp); + + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id vsp1_of_match[] = { + { .compatible = "renesas,vsp1" }, + { .compatible = "renesas,vsp2" }, + { .compatible = "renesas,r9a07g044-vsp2", .data = &rzg2l_vsp2_device_info }, + { }, +}; +MODULE_DEVICE_TABLE(of, vsp1_of_match); + +static struct platform_driver vsp1_platform_driver = { + .probe = vsp1_probe, + .remove = vsp1_remove, + .driver = { + .name = "vsp1", + .pm = &vsp1_pm_ops, + .of_match_table = vsp1_of_match, + }, +}; + +module_platform_driver(vsp1_platform_driver); + +MODULE_ALIAS("vsp1"); +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_DESCRIPTION("Renesas VSP1 Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/renesas/vsp1/vsp1_entity.c b/drivers/media/platform/renesas/vsp1/vsp1_entity.c new file mode 100644 index 000000000..c31f05a80 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_entity.c @@ -0,0 +1,700 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_entity.c -- R-Car VSP1 Base Entity + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_entity.h" +#include "vsp1_pipe.h" +#include "vsp1_rwpf.h" + +void vsp1_entity_route_setup(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_body *dlb) +{ + struct vsp1_entity *source; + u32 route; + + if (entity->type == VSP1_ENTITY_HGO) { + u32 smppt; + + /* + * The HGO is a special case, its routing is configured on the + * sink pad. + */ + source = entity->sources[0]; + smppt = (pipe->output->entity.index << VI6_DPR_SMPPT_TGW_SHIFT) + | (source->route->output << VI6_DPR_SMPPT_PT_SHIFT); + + vsp1_dl_body_write(dlb, VI6_DPR_HGO_SMPPT, smppt); + return; + } else if (entity->type == VSP1_ENTITY_HGT) { + u32 smppt; + + /* + * The HGT is a special case, its routing is configured on the + * sink pad. + */ + source = entity->sources[0]; + smppt = (pipe->output->entity.index << VI6_DPR_SMPPT_TGW_SHIFT) + | (source->route->output << VI6_DPR_SMPPT_PT_SHIFT); + + vsp1_dl_body_write(dlb, VI6_DPR_HGT_SMPPT, smppt); + return; + } + + source = entity; + if (source->route->reg == 0) + return; + + route = source->sink->route->inputs[source->sink_pad]; + /* + * The ILV and BRS share the same data path route. The extra BRSSEL bit + * selects between the ILV and BRS. + */ + if (source->type == VSP1_ENTITY_BRS) + route |= VI6_DPR_ROUTE_BRSSEL; + vsp1_dl_body_write(dlb, source->route->reg, route); +} + +void vsp1_entity_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + if (entity->ops->configure_stream) + entity->ops->configure_stream(entity, pipe, dl, dlb); +} + +void vsp1_entity_configure_frame(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + if (entity->ops->configure_frame) + entity->ops->configure_frame(entity, pipe, dl, dlb); +} + +void vsp1_entity_configure_partition(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + if (entity->ops->configure_partition) + entity->ops->configure_partition(entity, pipe, dl, dlb); +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +/** + * vsp1_entity_get_pad_config - Get the pad configuration for an entity + * @entity: the entity + * @sd_state: the TRY state + * @which: configuration selector (ACTIVE or TRY) + * + * When called with which set to V4L2_SUBDEV_FORMAT_ACTIVE the caller must hold + * the entity lock to access the returned configuration. + * + * Return the pad configuration requested by the which argument. The TRY + * configuration is passed explicitly to the function through the cfg argument + * and simply returned when requested. The ACTIVE configuration comes from the + * entity structure. + */ +struct v4l2_subdev_state * +vsp1_entity_get_pad_config(struct vsp1_entity *entity, + struct v4l2_subdev_state *sd_state, + enum v4l2_subdev_format_whence which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_ACTIVE: + return entity->config; + case V4L2_SUBDEV_FORMAT_TRY: + default: + return sd_state; + } +} + +/** + * vsp1_entity_get_pad_format - Get a pad format from storage for an entity + * @entity: the entity + * @sd_state: the state storage + * @pad: the pad number + * + * Return the format stored in the given configuration for an entity's pad. The + * configuration can be an ACTIVE or TRY configuration. + */ +struct v4l2_mbus_framefmt * +vsp1_entity_get_pad_format(struct vsp1_entity *entity, + struct v4l2_subdev_state *sd_state, + unsigned int pad) +{ + return v4l2_subdev_get_try_format(&entity->subdev, sd_state, pad); +} + +/** + * vsp1_entity_get_pad_selection - Get a pad selection from storage for entity + * @entity: the entity + * @sd_state: the state storage + * @pad: the pad number + * @target: the selection target + * + * Return the selection rectangle stored in the given configuration for an + * entity's pad. The configuration can be an ACTIVE or TRY configuration. The + * selection target can be COMPOSE or CROP. + */ +struct v4l2_rect * +vsp1_entity_get_pad_selection(struct vsp1_entity *entity, + struct v4l2_subdev_state *sd_state, + unsigned int pad, unsigned int target) +{ + switch (target) { + case V4L2_SEL_TGT_COMPOSE: + return v4l2_subdev_get_try_compose(&entity->subdev, sd_state, + pad); + case V4L2_SEL_TGT_CROP: + return v4l2_subdev_get_try_crop(&entity->subdev, sd_state, + pad); + default: + return NULL; + } +} + +/* + * vsp1_entity_init_cfg - Initialize formats on all pads + * @subdev: V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * + * Initialize all pad formats with default values in the given pad config. This + * function can be used as a handler for the subdev pad::init_cfg operation. + */ +int vsp1_entity_init_cfg(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state) +{ + unsigned int pad; + + for (pad = 0; pad < subdev->entity.num_pads - 1; ++pad) { + struct v4l2_subdev_format format = { + .pad = pad, + .which = sd_state ? V4L2_SUBDEV_FORMAT_TRY + : V4L2_SUBDEV_FORMAT_ACTIVE, + }; + + v4l2_subdev_call(subdev, pad, set_fmt, sd_state, &format); + } + + return 0; +} + +/* + * vsp1_subdev_get_pad_format - Subdev pad get_fmt handler + * @subdev: V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @fmt: V4L2 subdev format + * + * This function implements the subdev get_fmt pad operation. It can be used as + * a direct drop-in for the operation handler. + */ +int vsp1_subdev_get_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct vsp1_entity *entity = to_vsp1_entity(subdev); + struct v4l2_subdev_state *config; + + config = vsp1_entity_get_pad_config(entity, sd_state, fmt->which); + if (!config) + return -EINVAL; + + mutex_lock(&entity->lock); + fmt->format = *vsp1_entity_get_pad_format(entity, config, fmt->pad); + mutex_unlock(&entity->lock); + + return 0; +} + +/* + * vsp1_subdev_enum_mbus_code - Subdev pad enum_mbus_code handler + * @subdev: V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @code: Media bus code enumeration + * @codes: Array of supported media bus codes + * @ncodes: Number of supported media bus codes + * + * This function implements the subdev enum_mbus_code pad operation for entities + * that do not support format conversion. It enumerates the given supported + * media bus codes on the sink pad and reports a source pad format identical to + * the sink pad. + */ +int vsp1_subdev_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code, + const unsigned int *codes, unsigned int ncodes) +{ + struct vsp1_entity *entity = to_vsp1_entity(subdev); + + if (code->pad == 0) { + if (code->index >= ncodes) + return -EINVAL; + + code->code = codes[code->index]; + } else { + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + + /* + * The entity can't perform format conversion, the sink format + * is always identical to the source format. + */ + if (code->index) + return -EINVAL; + + config = vsp1_entity_get_pad_config(entity, sd_state, + code->which); + if (!config) + return -EINVAL; + + mutex_lock(&entity->lock); + format = vsp1_entity_get_pad_format(entity, config, 0); + code->code = format->code; + mutex_unlock(&entity->lock); + } + + return 0; +} + +/* + * vsp1_subdev_enum_frame_size - Subdev pad enum_frame_size handler + * @subdev: V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @fse: Frame size enumeration + * @min_width: Minimum image width + * @min_height: Minimum image height + * @max_width: Maximum image width + * @max_height: Maximum image height + * + * This function implements the subdev enum_frame_size pad operation for + * entities that do not support scaling or cropping. It reports the given + * minimum and maximum frame width and height on the sink pad, and a fixed + * source pad size identical to the sink pad. + */ +int vsp1_subdev_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse, + unsigned int min_width, unsigned int min_height, + unsigned int max_width, unsigned int max_height) +{ + struct vsp1_entity *entity = to_vsp1_entity(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + int ret = 0; + + config = vsp1_entity_get_pad_config(entity, sd_state, fse->which); + if (!config) + return -EINVAL; + + format = vsp1_entity_get_pad_format(entity, config, fse->pad); + + mutex_lock(&entity->lock); + + if (fse->index || fse->code != format->code) { + ret = -EINVAL; + goto done; + } + + if (fse->pad == 0) { + fse->min_width = min_width; + fse->max_width = max_width; + fse->min_height = min_height; + fse->max_height = max_height; + } else { + /* + * The size on the source pad are fixed and always identical to + * the size on the sink pad. + */ + fse->min_width = format->width; + fse->max_width = format->width; + fse->min_height = format->height; + fse->max_height = format->height; + } + +done: + mutex_unlock(&entity->lock); + return ret; +} + +/* + * vsp1_subdev_set_pad_format - Subdev pad set_fmt handler + * @subdev: V4L2 subdevice + * @cfg: V4L2 subdev pad configuration + * @fmt: V4L2 subdev format + * @codes: Array of supported media bus codes + * @ncodes: Number of supported media bus codes + * @min_width: Minimum image width + * @min_height: Minimum image height + * @max_width: Maximum image width + * @max_height: Maximum image height + * + * This function implements the subdev set_fmt pad operation for entities that + * do not support scaling or cropping. It defaults to the first supplied media + * bus code if the requested code isn't supported, clamps the size to the + * supplied minimum and maximum, and propagates the sink pad format to the + * source pad. + */ +int vsp1_subdev_set_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt, + const unsigned int *codes, unsigned int ncodes, + unsigned int min_width, unsigned int min_height, + unsigned int max_width, unsigned int max_height) +{ + struct vsp1_entity *entity = to_vsp1_entity(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *selection; + unsigned int i; + int ret = 0; + + mutex_lock(&entity->lock); + + config = vsp1_entity_get_pad_config(entity, sd_state, fmt->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + format = vsp1_entity_get_pad_format(entity, config, fmt->pad); + + if (fmt->pad == entity->source_pad) { + /* The output format can't be modified. */ + fmt->format = *format; + goto done; + } + + /* + * Default to the first media bus code if the requested format is not + * supported. + */ + for (i = 0; i < ncodes; ++i) { + if (fmt->format.code == codes[i]) + break; + } + + format->code = i < ncodes ? codes[i] : codes[0]; + format->width = clamp_t(unsigned int, fmt->format.width, + min_width, max_width); + format->height = clamp_t(unsigned int, fmt->format.height, + min_height, max_height); + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + fmt->format = *format; + + /* Propagate the format to the source pad. */ + format = vsp1_entity_get_pad_format(entity, config, entity->source_pad); + *format = fmt->format; + + /* Reset the crop and compose rectangles. */ + selection = vsp1_entity_get_pad_selection(entity, config, fmt->pad, + V4L2_SEL_TGT_CROP); + selection->left = 0; + selection->top = 0; + selection->width = format->width; + selection->height = format->height; + + selection = vsp1_entity_get_pad_selection(entity, config, fmt->pad, + V4L2_SEL_TGT_COMPOSE); + selection->left = 0; + selection->top = 0; + selection->width = format->width; + selection->height = format->height; + +done: + mutex_unlock(&entity->lock); + return ret; +} + +/* ----------------------------------------------------------------------------- + * Media Operations + */ + +static inline struct vsp1_entity * +media_entity_to_vsp1_entity(struct media_entity *entity) +{ + return container_of(entity, struct vsp1_entity, subdev.entity); +} + +static int vsp1_entity_link_setup_source(const struct media_pad *source_pad, + const struct media_pad *sink_pad, + u32 flags) +{ + struct vsp1_entity *source; + + source = media_entity_to_vsp1_entity(source_pad->entity); + + if (!source->route) + return 0; + + if (flags & MEDIA_LNK_FL_ENABLED) { + struct vsp1_entity *sink + = media_entity_to_vsp1_entity(sink_pad->entity); + + /* + * Fan-out is limited to one for the normal data path plus + * optional HGO and HGT. We ignore the HGO and HGT here. + */ + if (sink->type != VSP1_ENTITY_HGO && + sink->type != VSP1_ENTITY_HGT) { + if (source->sink) + return -EBUSY; + source->sink = sink; + source->sink_pad = sink_pad->index; + } + } else { + source->sink = NULL; + source->sink_pad = 0; + } + + return 0; +} + +static int vsp1_entity_link_setup_sink(const struct media_pad *source_pad, + const struct media_pad *sink_pad, + u32 flags) +{ + struct vsp1_entity *sink; + struct vsp1_entity *source; + + sink = media_entity_to_vsp1_entity(sink_pad->entity); + source = media_entity_to_vsp1_entity(source_pad->entity); + + if (flags & MEDIA_LNK_FL_ENABLED) { + /* Fan-in is limited to one. */ + if (sink->sources[sink_pad->index]) + return -EBUSY; + + sink->sources[sink_pad->index] = source; + } else { + sink->sources[sink_pad->index] = NULL; + } + + return 0; +} + +int vsp1_entity_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + if (local->flags & MEDIA_PAD_FL_SOURCE) + return vsp1_entity_link_setup_source(local, remote, flags); + else + return vsp1_entity_link_setup_sink(remote, local, flags); +} + +/** + * vsp1_entity_remote_pad - Find the pad at the remote end of a link + * @pad: Pad at the local end of the link + * + * Search for a remote pad connected to the given pad by iterating over all + * links originating or terminating at that pad until an enabled link is found. + * + * Our link setup implementation guarantees that the output fan-out will not be + * higher than one for the data pipelines, except for the links to the HGO and + * HGT that can be enabled in addition to a regular data link. When traversing + * outgoing links this function ignores HGO and HGT entities and should thus be + * used in place of the generic media_pad_remote_pad_first() function to + * traverse data pipelines. + * + * Return a pointer to the pad at the remote end of the first found enabled + * link, or NULL if no enabled link has been found. + */ +struct media_pad *vsp1_entity_remote_pad(struct media_pad *pad) +{ + struct media_link *link; + + list_for_each_entry(link, &pad->entity->links, list) { + struct vsp1_entity *entity; + + if (!(link->flags & MEDIA_LNK_FL_ENABLED)) + continue; + + /* If we're the sink the source will never be an HGO or HGT. */ + if (link->sink == pad) + return link->source; + + if (link->source != pad) + continue; + + /* If the sink isn't a subdevice it can't be an HGO or HGT. */ + if (!is_media_entity_v4l2_subdev(link->sink->entity)) + return link->sink; + + entity = media_entity_to_vsp1_entity(link->sink->entity); + if (entity->type != VSP1_ENTITY_HGO && + entity->type != VSP1_ENTITY_HGT) + return link->sink; + } + + return NULL; + +} + +/* ----------------------------------------------------------------------------- + * Initialization + */ + +#define VSP1_ENTITY_ROUTE(ent) \ + { VSP1_ENTITY_##ent, 0, VI6_DPR_##ent##_ROUTE, \ + { VI6_DPR_NODE_##ent }, VI6_DPR_NODE_##ent } + +#define VSP1_ENTITY_ROUTE_RPF(idx) \ + { VSP1_ENTITY_RPF, idx, VI6_DPR_RPF_ROUTE(idx), \ + { 0, }, VI6_DPR_NODE_RPF(idx) } + +#define VSP1_ENTITY_ROUTE_UDS(idx) \ + { VSP1_ENTITY_UDS, idx, VI6_DPR_UDS_ROUTE(idx), \ + { VI6_DPR_NODE_UDS(idx) }, VI6_DPR_NODE_UDS(idx) } + +#define VSP1_ENTITY_ROUTE_UIF(idx) \ + { VSP1_ENTITY_UIF, idx, VI6_DPR_UIF_ROUTE(idx), \ + { VI6_DPR_NODE_UIF(idx) }, VI6_DPR_NODE_UIF(idx) } + +#define VSP1_ENTITY_ROUTE_WPF(idx) \ + { VSP1_ENTITY_WPF, idx, 0, \ + { VI6_DPR_NODE_WPF(idx) }, VI6_DPR_NODE_WPF(idx) } + +static const struct vsp1_route vsp1_routes[] = { + { VSP1_ENTITY_BRS, 0, VI6_DPR_ILV_BRS_ROUTE, + { VI6_DPR_NODE_BRS_IN(0), VI6_DPR_NODE_BRS_IN(1) }, 0 }, + { VSP1_ENTITY_BRU, 0, VI6_DPR_BRU_ROUTE, + { VI6_DPR_NODE_BRU_IN(0), VI6_DPR_NODE_BRU_IN(1), + VI6_DPR_NODE_BRU_IN(2), VI6_DPR_NODE_BRU_IN(3), + VI6_DPR_NODE_BRU_IN(4) }, VI6_DPR_NODE_BRU_OUT }, + VSP1_ENTITY_ROUTE(CLU), + { VSP1_ENTITY_HGO, 0, 0, { 0, }, 0 }, + { VSP1_ENTITY_HGT, 0, 0, { 0, }, 0 }, + VSP1_ENTITY_ROUTE(HSI), + VSP1_ENTITY_ROUTE(HST), + { VSP1_ENTITY_LIF, 0, 0, { 0, }, 0 }, + { VSP1_ENTITY_LIF, 1, 0, { 0, }, 0 }, + VSP1_ENTITY_ROUTE(LUT), + VSP1_ENTITY_ROUTE_RPF(0), + VSP1_ENTITY_ROUTE_RPF(1), + VSP1_ENTITY_ROUTE_RPF(2), + VSP1_ENTITY_ROUTE_RPF(3), + VSP1_ENTITY_ROUTE_RPF(4), + VSP1_ENTITY_ROUTE(SRU), + VSP1_ENTITY_ROUTE_UDS(0), + VSP1_ENTITY_ROUTE_UDS(1), + VSP1_ENTITY_ROUTE_UDS(2), + VSP1_ENTITY_ROUTE_UIF(0), /* Named UIF4 in the documentation */ + VSP1_ENTITY_ROUTE_UIF(1), /* Named UIF5 in the documentation */ + VSP1_ENTITY_ROUTE_WPF(0), + VSP1_ENTITY_ROUTE_WPF(1), + VSP1_ENTITY_ROUTE_WPF(2), + VSP1_ENTITY_ROUTE_WPF(3), +}; + +int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity, + const char *name, unsigned int num_pads, + const struct v4l2_subdev_ops *ops, u32 function) +{ + static struct lock_class_key key; + struct v4l2_subdev *subdev; + unsigned int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(vsp1_routes); ++i) { + if (vsp1_routes[i].type == entity->type && + vsp1_routes[i].index == entity->index) { + entity->route = &vsp1_routes[i]; + break; + } + } + + if (i == ARRAY_SIZE(vsp1_routes)) + return -EINVAL; + + mutex_init(&entity->lock); + + entity->vsp1 = vsp1; + entity->source_pad = num_pads - 1; + + /* Allocate and initialize pads. */ + entity->pads = devm_kcalloc(vsp1->dev, + num_pads, sizeof(*entity->pads), + GFP_KERNEL); + if (entity->pads == NULL) + return -ENOMEM; + + for (i = 0; i < num_pads - 1; ++i) + entity->pads[i].flags = MEDIA_PAD_FL_SINK; + + entity->sources = devm_kcalloc(vsp1->dev, max(num_pads - 1, 1U), + sizeof(*entity->sources), GFP_KERNEL); + if (entity->sources == NULL) + return -ENOMEM; + + /* Single-pad entities only have a sink. */ + entity->pads[num_pads - 1].flags = num_pads > 1 ? MEDIA_PAD_FL_SOURCE + : MEDIA_PAD_FL_SINK; + + /* Initialize the media entity. */ + ret = media_entity_pads_init(&entity->subdev.entity, num_pads, + entity->pads); + if (ret < 0) + return ret; + + /* Initialize the V4L2 subdev. */ + subdev = &entity->subdev; + v4l2_subdev_init(subdev, ops); + + subdev->entity.function = function; + subdev->entity.ops = &vsp1->media_ops; + subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + snprintf(subdev->name, sizeof(subdev->name), "%s %s", + dev_name(vsp1->dev), name); + + vsp1_entity_init_cfg(subdev, NULL); + + /* + * Allocate the pad configuration to store formats and selection + * rectangles. + */ + /* + * FIXME: Drop this call, drivers are not supposed to use + * __v4l2_subdev_state_alloc(). + */ + entity->config = __v4l2_subdev_state_alloc(&entity->subdev, + "vsp1:config->lock", &key); + if (IS_ERR(entity->config)) { + media_entity_cleanup(&entity->subdev.entity); + return PTR_ERR(entity->config); + } + + return 0; +} + +void vsp1_entity_destroy(struct vsp1_entity *entity) +{ + if (entity->ops && entity->ops->destroy) + entity->ops->destroy(entity); + if (entity->subdev.ctrl_handler) + v4l2_ctrl_handler_free(entity->subdev.ctrl_handler); + __v4l2_subdev_state_free(entity->config); + media_entity_cleanup(&entity->subdev.entity); +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_entity.h b/drivers/media/platform/renesas/vsp1/vsp1_entity.h new file mode 100644 index 000000000..f22724439 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_entity.h @@ -0,0 +1,194 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_entity.h -- R-Car VSP1 Base Entity + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_ENTITY_H__ +#define __VSP1_ENTITY_H__ + +#include <linux/list.h> +#include <linux/mutex.h> + +#include <media/v4l2-subdev.h> + +struct vsp1_device; +struct vsp1_dl_body; +struct vsp1_dl_list; +struct vsp1_pipeline; +struct vsp1_partition; +struct vsp1_partition_window; + +enum vsp1_entity_type { + VSP1_ENTITY_BRS, + VSP1_ENTITY_BRU, + VSP1_ENTITY_CLU, + VSP1_ENTITY_HGO, + VSP1_ENTITY_HGT, + VSP1_ENTITY_HSI, + VSP1_ENTITY_HST, + VSP1_ENTITY_LIF, + VSP1_ENTITY_LUT, + VSP1_ENTITY_RPF, + VSP1_ENTITY_SRU, + VSP1_ENTITY_UDS, + VSP1_ENTITY_UIF, + VSP1_ENTITY_WPF, +}; + +#define VSP1_ENTITY_MAX_INPUTS 5 /* For the BRU */ + +/* + * struct vsp1_route - Entity routing configuration + * @type: Entity type this routing entry is associated with + * @index: Entity index this routing entry is associated with + * @reg: Output routing configuration register + * @inputs: Target node value for each input + * @output: Target node value for entity output + * + * Each $vsp1_route entry describes routing configuration for the entity + * specified by the entry's @type and @index. @reg indicates the register that + * holds output routing configuration for the entity, and the @inputs array + * store the target node value for each input of the entity. The @output field + * stores the target node value of the entity output when used as a source for + * histogram generation. + */ +struct vsp1_route { + enum vsp1_entity_type type; + unsigned int index; + unsigned int reg; + unsigned int inputs[VSP1_ENTITY_MAX_INPUTS]; + unsigned int output; +}; + +/** + * struct vsp1_entity_operations - Entity operations + * @destroy: Destroy the entity. + * @configure_stream: Setup the hardware parameters for the stream which do + * not vary between frames (pipeline, formats). Note that + * the vsp1_dl_list argument is only valid for display + * pipeline and will be NULL for mem-to-mem pipelines. + * @configure_frame: Configure the runtime parameters for each frame. + * @configure_partition: Configure partition specific parameters. + * @max_width: Return the max supported width of data that the entity can + * process in a single operation. + * @partition: Process the partition construction based on this entity's + * configuration. + */ +struct vsp1_entity_operations { + void (*destroy)(struct vsp1_entity *); + void (*configure_stream)(struct vsp1_entity *, struct vsp1_pipeline *, + struct vsp1_dl_list *, struct vsp1_dl_body *); + void (*configure_frame)(struct vsp1_entity *, struct vsp1_pipeline *, + struct vsp1_dl_list *, struct vsp1_dl_body *); + void (*configure_partition)(struct vsp1_entity *, + struct vsp1_pipeline *, + struct vsp1_dl_list *, + struct vsp1_dl_body *); + unsigned int (*max_width)(struct vsp1_entity *, struct vsp1_pipeline *); + void (*partition)(struct vsp1_entity *, struct vsp1_pipeline *, + struct vsp1_partition *, unsigned int, + struct vsp1_partition_window *); +}; + +struct vsp1_entity { + struct vsp1_device *vsp1; + + const struct vsp1_entity_operations *ops; + + enum vsp1_entity_type type; + unsigned int index; + const struct vsp1_route *route; + + struct vsp1_pipeline *pipe; + + struct list_head list_dev; + struct list_head list_pipe; + + struct media_pad *pads; + unsigned int source_pad; + + struct vsp1_entity **sources; + struct vsp1_entity *sink; + unsigned int sink_pad; + + struct v4l2_subdev subdev; + struct v4l2_subdev_state *config; + + struct mutex lock; /* Protects the pad config */ +}; + +static inline struct vsp1_entity *to_vsp1_entity(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_entity, subdev); +} + +int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity, + const char *name, unsigned int num_pads, + const struct v4l2_subdev_ops *ops, u32 function); +void vsp1_entity_destroy(struct vsp1_entity *entity); + +extern const struct v4l2_subdev_internal_ops vsp1_subdev_internal_ops; + +int vsp1_entity_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags); + +struct v4l2_subdev_state * +vsp1_entity_get_pad_config(struct vsp1_entity *entity, + struct v4l2_subdev_state *sd_state, + enum v4l2_subdev_format_whence which); +struct v4l2_mbus_framefmt * +vsp1_entity_get_pad_format(struct vsp1_entity *entity, + struct v4l2_subdev_state *sd_state, + unsigned int pad); +struct v4l2_rect * +vsp1_entity_get_pad_selection(struct vsp1_entity *entity, + struct v4l2_subdev_state *sd_state, + unsigned int pad, unsigned int target); +int vsp1_entity_init_cfg(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state); + +void vsp1_entity_route_setup(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_body *dlb); + +void vsp1_entity_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb); + +void vsp1_entity_configure_frame(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb); + +void vsp1_entity_configure_partition(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb); + +struct media_pad *vsp1_entity_remote_pad(struct media_pad *pad); + +int vsp1_subdev_get_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt); +int vsp1_subdev_set_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt, + const unsigned int *codes, unsigned int ncodes, + unsigned int min_width, unsigned int min_height, + unsigned int max_width, unsigned int max_height); +int vsp1_subdev_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code, + const unsigned int *codes, unsigned int ncodes); +int vsp1_subdev_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse, + unsigned int min_w, unsigned int min_h, + unsigned int max_w, unsigned int max_h); + +#endif /* __VSP1_ENTITY_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_hgo.c b/drivers/media/platform/renesas/vsp1/vsp1_hgo.c new file mode 100644 index 000000000..bf3f981f9 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_hgo.c @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_hgo.c -- R-Car VSP1 Histogram Generator 1D + * + * Copyright (C) 2016 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-subdev.h> +#include <media/videobuf2-vmalloc.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_hgo.h" + +#define HGO_DATA_SIZE ((2 + 256) * 4) + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline u32 vsp1_hgo_read(struct vsp1_hgo *hgo, u32 reg) +{ + return vsp1_read(hgo->histo.entity.vsp1, reg); +} + +static inline void vsp1_hgo_write(struct vsp1_hgo *hgo, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg, data); +} + +/* ----------------------------------------------------------------------------- + * Frame End Handler + */ + +void vsp1_hgo_frame_end(struct vsp1_entity *entity) +{ + struct vsp1_hgo *hgo = to_hgo(&entity->subdev); + struct vsp1_histogram_buffer *buf; + unsigned int i; + size_t size; + u32 *data; + + buf = vsp1_histogram_buffer_get(&hgo->histo); + if (!buf) + return; + + data = buf->addr; + + if (hgo->num_bins == 256) { + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_MAXMIN); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_SUM); + + for (i = 0; i < 256; ++i) { + vsp1_write(hgo->histo.entity.vsp1, + VI6_HGO_EXT_HIST_ADDR, i); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_EXT_HIST_DATA); + } + + size = (2 + 256) * sizeof(u32); + } else if (hgo->max_rgb) { + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_MAXMIN); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_SUM); + + for (i = 0; i < 64; ++i) + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_HISTO(i)); + + size = (2 + 64) * sizeof(u32); + } else { + *data++ = vsp1_hgo_read(hgo, VI6_HGO_R_MAXMIN); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_MAXMIN); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_B_MAXMIN); + + *data++ = vsp1_hgo_read(hgo, VI6_HGO_R_SUM); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_G_SUM); + *data++ = vsp1_hgo_read(hgo, VI6_HGO_B_SUM); + + for (i = 0; i < 64; ++i) { + data[i] = vsp1_hgo_read(hgo, VI6_HGO_R_HISTO(i)); + data[i+64] = vsp1_hgo_read(hgo, VI6_HGO_G_HISTO(i)); + data[i+128] = vsp1_hgo_read(hgo, VI6_HGO_B_HISTO(i)); + } + + size = (6 + 64 * 3) * sizeof(u32); + } + + vsp1_histogram_buffer_complete(&hgo->histo, buf, size); +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +#define V4L2_CID_VSP1_HGO_MAX_RGB (V4L2_CID_USER_BASE | 0x1001) +#define V4L2_CID_VSP1_HGO_NUM_BINS (V4L2_CID_USER_BASE | 0x1002) + +static const struct v4l2_ctrl_config hgo_max_rgb_control = { + .id = V4L2_CID_VSP1_HGO_MAX_RGB, + .name = "Maximum RGB Mode", + .type = V4L2_CTRL_TYPE_BOOLEAN, + .min = 0, + .max = 1, + .def = 0, + .step = 1, + .flags = V4L2_CTRL_FLAG_MODIFY_LAYOUT, +}; + +static const s64 hgo_num_bins[] = { + 64, 256, +}; + +static const struct v4l2_ctrl_config hgo_num_bins_control = { + .id = V4L2_CID_VSP1_HGO_NUM_BINS, + .name = "Number of Bins", + .type = V4L2_CTRL_TYPE_INTEGER_MENU, + .min = 0, + .max = 1, + .def = 0, + .qmenu_int = hgo_num_bins, + .flags = V4L2_CTRL_FLAG_MODIFY_LAYOUT, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void hgo_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_hgo *hgo = to_hgo(&entity->subdev); + struct v4l2_rect *compose; + struct v4l2_rect *crop; + unsigned int hratio; + unsigned int vratio; + + crop = vsp1_entity_get_pad_selection(entity, entity->config, + HISTO_PAD_SINK, V4L2_SEL_TGT_CROP); + compose = vsp1_entity_get_pad_selection(entity, entity->config, + HISTO_PAD_SINK, + V4L2_SEL_TGT_COMPOSE); + + vsp1_hgo_write(hgo, dlb, VI6_HGO_REGRST, VI6_HGO_REGRST_RCLEA); + + vsp1_hgo_write(hgo, dlb, VI6_HGO_OFFSET, + (crop->left << VI6_HGO_OFFSET_HOFFSET_SHIFT) | + (crop->top << VI6_HGO_OFFSET_VOFFSET_SHIFT)); + vsp1_hgo_write(hgo, dlb, VI6_HGO_SIZE, + (crop->width << VI6_HGO_SIZE_HSIZE_SHIFT) | + (crop->height << VI6_HGO_SIZE_VSIZE_SHIFT)); + + mutex_lock(hgo->ctrls.handler.lock); + hgo->max_rgb = hgo->ctrls.max_rgb->cur.val; + if (hgo->ctrls.num_bins) + hgo->num_bins = hgo_num_bins[hgo->ctrls.num_bins->cur.val]; + mutex_unlock(hgo->ctrls.handler.lock); + + hratio = crop->width * 2 / compose->width / 3; + vratio = crop->height * 2 / compose->height / 3; + vsp1_hgo_write(hgo, dlb, VI6_HGO_MODE, + (hgo->num_bins == 256 ? VI6_HGO_MODE_STEP : 0) | + (hgo->max_rgb ? VI6_HGO_MODE_MAXRGB : 0) | + (hratio << VI6_HGO_MODE_HRATIO_SHIFT) | + (vratio << VI6_HGO_MODE_VRATIO_SHIFT)); +} + +static const struct vsp1_entity_operations hgo_entity_ops = { + .configure_stream = hgo_configure_stream, + .destroy = vsp1_histogram_destroy, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +static const unsigned int hgo_mbus_formats[] = { + MEDIA_BUS_FMT_AYUV8_1X32, + MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AHSV8888_1X32, +}; + +struct vsp1_hgo *vsp1_hgo_create(struct vsp1_device *vsp1) +{ + struct vsp1_hgo *hgo; + int ret; + + hgo = devm_kzalloc(vsp1->dev, sizeof(*hgo), GFP_KERNEL); + if (hgo == NULL) + return ERR_PTR(-ENOMEM); + + /* Initialize the control handler. */ + v4l2_ctrl_handler_init(&hgo->ctrls.handler, + vsp1->info->gen == 3 ? 2 : 1); + hgo->ctrls.max_rgb = v4l2_ctrl_new_custom(&hgo->ctrls.handler, + &hgo_max_rgb_control, NULL); + if (vsp1->info->gen == 3) + hgo->ctrls.num_bins = + v4l2_ctrl_new_custom(&hgo->ctrls.handler, + &hgo_num_bins_control, NULL); + + hgo->max_rgb = false; + hgo->num_bins = 64; + + hgo->histo.entity.subdev.ctrl_handler = &hgo->ctrls.handler; + + /* Initialize the video device and queue for statistics data. */ + ret = vsp1_histogram_init(vsp1, &hgo->histo, VSP1_ENTITY_HGO, "hgo", + &hgo_entity_ops, hgo_mbus_formats, + ARRAY_SIZE(hgo_mbus_formats), + HGO_DATA_SIZE, V4L2_META_FMT_VSP1_HGO); + if (ret < 0) { + vsp1_entity_destroy(&hgo->histo.entity); + return ERR_PTR(ret); + } + + return hgo; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_hgo.h b/drivers/media/platform/renesas/vsp1/vsp1_hgo.h new file mode 100644 index 000000000..6b0c8580e --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_hgo.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_hgo.h -- R-Car VSP1 Histogram Generator 1D + * + * Copyright (C) 2016 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_HGO_H__ +#define __VSP1_HGO_H__ + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_histo.h" + +struct vsp1_device; + +struct vsp1_hgo { + struct vsp1_histogram histo; + + struct { + struct v4l2_ctrl_handler handler; + struct v4l2_ctrl *max_rgb; + struct v4l2_ctrl *num_bins; + } ctrls; + + bool max_rgb; + unsigned int num_bins; +}; + +static inline struct vsp1_hgo *to_hgo(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_hgo, histo.entity.subdev); +} + +struct vsp1_hgo *vsp1_hgo_create(struct vsp1_device *vsp1); +void vsp1_hgo_frame_end(struct vsp1_entity *hgo); + +#endif /* __VSP1_HGO_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_hgt.c b/drivers/media/platform/renesas/vsp1/vsp1_hgt.c new file mode 100644 index 000000000..aa1c718e0 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_hgt.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_hgt.c -- R-Car VSP1 Histogram Generator 2D + * + * Copyright (C) 2016 Renesas Electronics Corporation + * + * Contact: Niklas Söderlund (niklas.soderlund@ragnatech.se) + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-subdev.h> +#include <media/videobuf2-vmalloc.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_hgt.h" + +#define HGT_DATA_SIZE ((2 + 6 * 32) * 4) + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline u32 vsp1_hgt_read(struct vsp1_hgt *hgt, u32 reg) +{ + return vsp1_read(hgt->histo.entity.vsp1, reg); +} + +static inline void vsp1_hgt_write(struct vsp1_hgt *hgt, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg, data); +} + +/* ----------------------------------------------------------------------------- + * Frame End Handler + */ + +void vsp1_hgt_frame_end(struct vsp1_entity *entity) +{ + struct vsp1_hgt *hgt = to_hgt(&entity->subdev); + struct vsp1_histogram_buffer *buf; + unsigned int m; + unsigned int n; + u32 *data; + + buf = vsp1_histogram_buffer_get(&hgt->histo); + if (!buf) + return; + + data = buf->addr; + + *data++ = vsp1_hgt_read(hgt, VI6_HGT_MAXMIN); + *data++ = vsp1_hgt_read(hgt, VI6_HGT_SUM); + + for (m = 0; m < 6; ++m) + for (n = 0; n < 32; ++n) + *data++ = vsp1_hgt_read(hgt, VI6_HGT_HISTO(m, n)); + + vsp1_histogram_buffer_complete(&hgt->histo, buf, HGT_DATA_SIZE); +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +#define V4L2_CID_VSP1_HGT_HUE_AREAS (V4L2_CID_USER_BASE | 0x1001) + +static int hgt_hue_areas_try_ctrl(struct v4l2_ctrl *ctrl) +{ + const u8 *values = ctrl->p_new.p_u8; + unsigned int i; + + /* + * The hardware has constraints on the hue area boundaries beyond the + * control min, max and step. The values must match one of the following + * expressions. + * + * 0L <= 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U + * 0U <= 1L <= 1U <= 2L <= 2U <= 3L <= 3U <= 4L <= 4U <= 5L <= 5U <= 0L + * + * Start by verifying the common part... + */ + for (i = 1; i < (HGT_NUM_HUE_AREAS * 2) - 1; ++i) { + if (values[i] > values[i+1]) + return -EINVAL; + } + + /* ... and handle 0L separately. */ + if (values[0] > values[1] && values[11] > values[0]) + return -EINVAL; + + return 0; +} + +static int hgt_hue_areas_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct vsp1_hgt *hgt = container_of(ctrl->handler, struct vsp1_hgt, + ctrls); + + memcpy(hgt->hue_areas, ctrl->p_new.p_u8, sizeof(hgt->hue_areas)); + return 0; +} + +static const struct v4l2_ctrl_ops hgt_hue_areas_ctrl_ops = { + .try_ctrl = hgt_hue_areas_try_ctrl, + .s_ctrl = hgt_hue_areas_s_ctrl, +}; + +static const struct v4l2_ctrl_config hgt_hue_areas = { + .ops = &hgt_hue_areas_ctrl_ops, + .id = V4L2_CID_VSP1_HGT_HUE_AREAS, + .name = "Boundary Values for Hue Area", + .type = V4L2_CTRL_TYPE_U8, + .min = 0, + .max = 255, + .def = 0, + .step = 1, + .dims = { 12 }, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void hgt_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_hgt *hgt = to_hgt(&entity->subdev); + struct v4l2_rect *compose; + struct v4l2_rect *crop; + unsigned int hratio; + unsigned int vratio; + u8 lower; + u8 upper; + unsigned int i; + + crop = vsp1_entity_get_pad_selection(entity, entity->config, + HISTO_PAD_SINK, V4L2_SEL_TGT_CROP); + compose = vsp1_entity_get_pad_selection(entity, entity->config, + HISTO_PAD_SINK, + V4L2_SEL_TGT_COMPOSE); + + vsp1_hgt_write(hgt, dlb, VI6_HGT_REGRST, VI6_HGT_REGRST_RCLEA); + + vsp1_hgt_write(hgt, dlb, VI6_HGT_OFFSET, + (crop->left << VI6_HGT_OFFSET_HOFFSET_SHIFT) | + (crop->top << VI6_HGT_OFFSET_VOFFSET_SHIFT)); + vsp1_hgt_write(hgt, dlb, VI6_HGT_SIZE, + (crop->width << VI6_HGT_SIZE_HSIZE_SHIFT) | + (crop->height << VI6_HGT_SIZE_VSIZE_SHIFT)); + + mutex_lock(hgt->ctrls.lock); + for (i = 0; i < HGT_NUM_HUE_AREAS; ++i) { + lower = hgt->hue_areas[i*2 + 0]; + upper = hgt->hue_areas[i*2 + 1]; + vsp1_hgt_write(hgt, dlb, VI6_HGT_HUE_AREA(i), + (lower << VI6_HGT_HUE_AREA_LOWER_SHIFT) | + (upper << VI6_HGT_HUE_AREA_UPPER_SHIFT)); + } + mutex_unlock(hgt->ctrls.lock); + + hratio = crop->width * 2 / compose->width / 3; + vratio = crop->height * 2 / compose->height / 3; + vsp1_hgt_write(hgt, dlb, VI6_HGT_MODE, + (hratio << VI6_HGT_MODE_HRATIO_SHIFT) | + (vratio << VI6_HGT_MODE_VRATIO_SHIFT)); +} + +static const struct vsp1_entity_operations hgt_entity_ops = { + .configure_stream = hgt_configure_stream, + .destroy = vsp1_histogram_destroy, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +static const unsigned int hgt_mbus_formats[] = { + MEDIA_BUS_FMT_AHSV8888_1X32, +}; + +struct vsp1_hgt *vsp1_hgt_create(struct vsp1_device *vsp1) +{ + struct vsp1_hgt *hgt; + int ret; + + hgt = devm_kzalloc(vsp1->dev, sizeof(*hgt), GFP_KERNEL); + if (hgt == NULL) + return ERR_PTR(-ENOMEM); + + /* Initialize the control handler. */ + v4l2_ctrl_handler_init(&hgt->ctrls, 1); + v4l2_ctrl_new_custom(&hgt->ctrls, &hgt_hue_areas, NULL); + + hgt->histo.entity.subdev.ctrl_handler = &hgt->ctrls; + + /* Initialize the video device and queue for statistics data. */ + ret = vsp1_histogram_init(vsp1, &hgt->histo, VSP1_ENTITY_HGT, "hgt", + &hgt_entity_ops, hgt_mbus_formats, + ARRAY_SIZE(hgt_mbus_formats), + HGT_DATA_SIZE, V4L2_META_FMT_VSP1_HGT); + if (ret < 0) { + vsp1_entity_destroy(&hgt->histo.entity); + return ERR_PTR(ret); + } + + v4l2_ctrl_handler_setup(&hgt->ctrls); + + return hgt; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_hgt.h b/drivers/media/platform/renesas/vsp1/vsp1_hgt.h new file mode 100644 index 000000000..38ec237bd --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_hgt.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_hgt.h -- R-Car VSP1 Histogram Generator 2D + * + * Copyright (C) 2016 Renesas Electronics Corporation + * + * Contact: Niklas Söderlund (niklas.soderlund@ragnatech.se) + */ +#ifndef __VSP1_HGT_H__ +#define __VSP1_HGT_H__ + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_histo.h" + +struct vsp1_device; + +#define HGT_NUM_HUE_AREAS 6 + +struct vsp1_hgt { + struct vsp1_histogram histo; + + struct v4l2_ctrl_handler ctrls; + + u8 hue_areas[HGT_NUM_HUE_AREAS * 2]; +}; + +static inline struct vsp1_hgt *to_hgt(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_hgt, histo.entity.subdev); +} + +struct vsp1_hgt *vsp1_hgt_create(struct vsp1_device *vsp1); +void vsp1_hgt_frame_end(struct vsp1_entity *hgt); + +#endif /* __VSP1_HGT_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_histo.c b/drivers/media/platform/renesas/vsp1/vsp1_histo.c new file mode 100644 index 000000000..f22449dd6 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_histo.c @@ -0,0 +1,593 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_histo.c -- R-Car VSP1 Histogram API + * + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2016 Laurent Pinchart + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-ioctl.h> +#include <media/v4l2-subdev.h> +#include <media/videobuf2-vmalloc.h> + +#include "vsp1.h" +#include "vsp1_histo.h" +#include "vsp1_pipe.h" + +#define HISTO_MIN_SIZE 4U +#define HISTO_MAX_SIZE 8192U + +/* ----------------------------------------------------------------------------- + * Buffer Operations + */ + +static inline struct vsp1_histogram_buffer * +to_vsp1_histogram_buffer(struct vb2_v4l2_buffer *vbuf) +{ + return container_of(vbuf, struct vsp1_histogram_buffer, buf); +} + +struct vsp1_histogram_buffer * +vsp1_histogram_buffer_get(struct vsp1_histogram *histo) +{ + struct vsp1_histogram_buffer *buf = NULL; + unsigned long flags; + + spin_lock_irqsave(&histo->irqlock, flags); + + if (list_empty(&histo->irqqueue)) + goto done; + + buf = list_first_entry(&histo->irqqueue, struct vsp1_histogram_buffer, + queue); + list_del(&buf->queue); + histo->readout = true; + +done: + spin_unlock_irqrestore(&histo->irqlock, flags); + return buf; +} + +void vsp1_histogram_buffer_complete(struct vsp1_histogram *histo, + struct vsp1_histogram_buffer *buf, + size_t size) +{ + struct vsp1_pipeline *pipe = histo->entity.pipe; + unsigned long flags; + + /* + * The pipeline pointer is guaranteed to be valid as this function is + * called from the frame completion interrupt handler, which can only + * occur when video streaming is active. + */ + buf->buf.sequence = pipe->sequence; + buf->buf.vb2_buf.timestamp = ktime_get_ns(); + vb2_set_plane_payload(&buf->buf.vb2_buf, 0, size); + vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_DONE); + + spin_lock_irqsave(&histo->irqlock, flags); + histo->readout = false; + wake_up(&histo->wait_queue); + spin_unlock_irqrestore(&histo->irqlock, flags); +} + +/* ----------------------------------------------------------------------------- + * videobuf2 Queue Operations + */ + +static int histo_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, + unsigned int *nplanes, unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct vsp1_histogram *histo = vb2_get_drv_priv(vq); + + if (*nplanes) { + if (*nplanes != 1) + return -EINVAL; + + if (sizes[0] < histo->data_size) + return -EINVAL; + + return 0; + } + + *nplanes = 1; + sizes[0] = histo->data_size; + + return 0; +} + +static int histo_buffer_prepare(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct vsp1_histogram *histo = vb2_get_drv_priv(vb->vb2_queue); + struct vsp1_histogram_buffer *buf = to_vsp1_histogram_buffer(vbuf); + + if (vb->num_planes != 1) + return -EINVAL; + + if (vb2_plane_size(vb, 0) < histo->data_size) + return -EINVAL; + + buf->addr = vb2_plane_vaddr(vb, 0); + + return 0; +} + +static void histo_buffer_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct vsp1_histogram *histo = vb2_get_drv_priv(vb->vb2_queue); + struct vsp1_histogram_buffer *buf = to_vsp1_histogram_buffer(vbuf); + unsigned long flags; + + spin_lock_irqsave(&histo->irqlock, flags); + list_add_tail(&buf->queue, &histo->irqqueue); + spin_unlock_irqrestore(&histo->irqlock, flags); +} + +static int histo_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + return 0; +} + +static void histo_stop_streaming(struct vb2_queue *vq) +{ + struct vsp1_histogram *histo = vb2_get_drv_priv(vq); + struct vsp1_histogram_buffer *buffer; + unsigned long flags; + + spin_lock_irqsave(&histo->irqlock, flags); + + /* Remove all buffers from the IRQ queue. */ + list_for_each_entry(buffer, &histo->irqqueue, queue) + vb2_buffer_done(&buffer->buf.vb2_buf, VB2_BUF_STATE_ERROR); + INIT_LIST_HEAD(&histo->irqqueue); + + /* Wait for the buffer being read out (if any) to complete. */ + wait_event_lock_irq(histo->wait_queue, !histo->readout, histo->irqlock); + + spin_unlock_irqrestore(&histo->irqlock, flags); +} + +static const struct vb2_ops histo_video_queue_qops = { + .queue_setup = histo_queue_setup, + .buf_prepare = histo_buffer_prepare, + .buf_queue = histo_buffer_queue, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .start_streaming = histo_start_streaming, + .stop_streaming = histo_stop_streaming, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static int histo_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + + if (code->pad == HISTO_PAD_SOURCE) { + code->code = MEDIA_BUS_FMT_FIXED; + return 0; + } + + return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, + histo->formats, + histo->num_formats); +} + +static int histo_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + if (fse->pad != HISTO_PAD_SINK) + return -EINVAL; + + return vsp1_subdev_enum_frame_size(subdev, sd_state, fse, + HISTO_MIN_SIZE, + HISTO_MIN_SIZE, HISTO_MAX_SIZE, + HISTO_MAX_SIZE); +} + +static int histo_get_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + int ret = 0; + + if (sel->pad != HISTO_PAD_SINK) + return -EINVAL; + + mutex_lock(&histo->entity.lock); + + config = vsp1_entity_get_pad_config(&histo->entity, sd_state, + sel->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + switch (sel->target) { + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + case V4L2_SEL_TGT_COMPOSE_DEFAULT: + crop = vsp1_entity_get_pad_selection(&histo->entity, config, + HISTO_PAD_SINK, + V4L2_SEL_TGT_CROP); + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = crop->width; + sel->r.height = crop->height; + break; + + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + format = vsp1_entity_get_pad_format(&histo->entity, config, + HISTO_PAD_SINK); + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = format->width; + sel->r.height = format->height; + break; + + case V4L2_SEL_TGT_COMPOSE: + case V4L2_SEL_TGT_CROP: + sel->r = *vsp1_entity_get_pad_selection(&histo->entity, config, + sel->pad, sel->target); + break; + + default: + ret = -EINVAL; + break; + } + +done: + mutex_unlock(&histo->entity.lock); + return ret; +} + +static int histo_set_crop(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *selection; + + /* The crop rectangle must be inside the input frame. */ + format = vsp1_entity_get_pad_format(&histo->entity, sd_state, + HISTO_PAD_SINK); + sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1); + sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1); + sel->r.width = clamp_t(unsigned int, sel->r.width, HISTO_MIN_SIZE, + format->width - sel->r.left); + sel->r.height = clamp_t(unsigned int, sel->r.height, HISTO_MIN_SIZE, + format->height - sel->r.top); + + /* Set the crop rectangle and reset the compose rectangle. */ + selection = vsp1_entity_get_pad_selection(&histo->entity, sd_state, + sel->pad, V4L2_SEL_TGT_CROP); + *selection = sel->r; + + selection = vsp1_entity_get_pad_selection(&histo->entity, sd_state, + sel->pad, + V4L2_SEL_TGT_COMPOSE); + *selection = sel->r; + + return 0; +} + +static int histo_set_compose(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + struct v4l2_rect *compose; + struct v4l2_rect *crop; + unsigned int ratio; + + /* + * The compose rectangle is used to configure downscaling, the top left + * corner is fixed to (0,0) and the size to 1/2 or 1/4 of the crop + * rectangle. + */ + sel->r.left = 0; + sel->r.top = 0; + + crop = vsp1_entity_get_pad_selection(&histo->entity, sd_state, + sel->pad, + V4L2_SEL_TGT_CROP); + + /* + * Clamp the width and height to acceptable values first and then + * compute the closest rounded dividing ratio. + * + * Ratio Rounded ratio + * -------------------------- + * [1.0 1.5[ 1 + * [1.5 3.0[ 2 + * [3.0 4.0] 4 + * + * The rounded ratio can be computed using + * + * 1 << (ceil(ratio * 2) / 3) + */ + sel->r.width = clamp(sel->r.width, crop->width / 4, crop->width); + ratio = 1 << (crop->width * 2 / sel->r.width / 3); + sel->r.width = crop->width / ratio; + + + sel->r.height = clamp(sel->r.height, crop->height / 4, crop->height); + ratio = 1 << (crop->height * 2 / sel->r.height / 3); + sel->r.height = crop->height / ratio; + + compose = vsp1_entity_get_pad_selection(&histo->entity, sd_state, + sel->pad, + V4L2_SEL_TGT_COMPOSE); + *compose = sel->r; + + return 0; +} + +static int histo_set_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + struct v4l2_subdev_state *config; + int ret; + + if (sel->pad != HISTO_PAD_SINK) + return -EINVAL; + + mutex_lock(&histo->entity.lock); + + config = vsp1_entity_get_pad_config(&histo->entity, sd_state, + sel->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + if (sel->target == V4L2_SEL_TGT_CROP) + ret = histo_set_crop(subdev, config, sel); + else if (sel->target == V4L2_SEL_TGT_COMPOSE) + ret = histo_set_compose(subdev, config, sel); + else + ret = -EINVAL; + +done: + mutex_unlock(&histo->entity.lock); + return ret; +} + +static int histo_get_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + if (fmt->pad == HISTO_PAD_SOURCE) { + fmt->format.code = MEDIA_BUS_FMT_FIXED; + fmt->format.width = 0; + fmt->format.height = 0; + fmt->format.field = V4L2_FIELD_NONE; + fmt->format.colorspace = V4L2_COLORSPACE_RAW; + return 0; + } + + return vsp1_subdev_get_pad_format(subdev, sd_state, fmt); +} + +static int histo_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct vsp1_histogram *histo = subdev_to_histo(subdev); + + if (fmt->pad != HISTO_PAD_SINK) + return histo_get_format(subdev, sd_state, fmt); + + return vsp1_subdev_set_pad_format(subdev, sd_state, fmt, + histo->formats, histo->num_formats, + HISTO_MIN_SIZE, HISTO_MIN_SIZE, + HISTO_MAX_SIZE, HISTO_MAX_SIZE); +} + +static const struct v4l2_subdev_pad_ops histo_pad_ops = { + .enum_mbus_code = histo_enum_mbus_code, + .enum_frame_size = histo_enum_frame_size, + .get_fmt = histo_get_format, + .set_fmt = histo_set_format, + .get_selection = histo_get_selection, + .set_selection = histo_set_selection, +}; + +static const struct v4l2_subdev_ops histo_ops = { + .pad = &histo_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 ioctls + */ + +static int histo_v4l2_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_histogram *histo = vdev_to_histo(vfh->vdev); + + cap->capabilities = V4L2_CAP_DEVICE_CAPS | V4L2_CAP_STREAMING + | V4L2_CAP_VIDEO_CAPTURE_MPLANE + | V4L2_CAP_VIDEO_OUTPUT_MPLANE + | V4L2_CAP_META_CAPTURE; + + strscpy(cap->driver, "vsp1", sizeof(cap->driver)); + strscpy(cap->card, histo->video.name, sizeof(cap->card)); + + return 0; +} + +static int histo_v4l2_enum_format(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_histogram *histo = vdev_to_histo(vfh->vdev); + + if (f->index > 0 || f->type != histo->queue.type) + return -EINVAL; + + f->pixelformat = histo->meta_format; + + return 0; +} + +static int histo_v4l2_get_format(struct file *file, void *fh, + struct v4l2_format *format) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_histogram *histo = vdev_to_histo(vfh->vdev); + struct v4l2_meta_format *meta = &format->fmt.meta; + + if (format->type != histo->queue.type) + return -EINVAL; + + memset(meta, 0, sizeof(*meta)); + + meta->dataformat = histo->meta_format; + meta->buffersize = histo->data_size; + + return 0; +} + +static const struct v4l2_ioctl_ops histo_v4l2_ioctl_ops = { + .vidioc_querycap = histo_v4l2_querycap, + .vidioc_enum_fmt_meta_cap = histo_v4l2_enum_format, + .vidioc_g_fmt_meta_cap = histo_v4l2_get_format, + .vidioc_s_fmt_meta_cap = histo_v4l2_get_format, + .vidioc_try_fmt_meta_cap = histo_v4l2_get_format, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 File Operations + */ + +static const struct v4l2_file_operations histo_v4l2_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, +}; + +static void vsp1_histogram_cleanup(struct vsp1_histogram *histo) +{ + if (video_is_registered(&histo->video)) + video_unregister_device(&histo->video); + + media_entity_cleanup(&histo->video.entity); +} + +void vsp1_histogram_destroy(struct vsp1_entity *entity) +{ + struct vsp1_histogram *histo = subdev_to_histo(&entity->subdev); + + vsp1_histogram_cleanup(histo); +} + +int vsp1_histogram_init(struct vsp1_device *vsp1, struct vsp1_histogram *histo, + enum vsp1_entity_type type, const char *name, + const struct vsp1_entity_operations *ops, + const unsigned int *formats, unsigned int num_formats, + size_t data_size, u32 meta_format) +{ + int ret; + + histo->formats = formats; + histo->num_formats = num_formats; + histo->data_size = data_size; + histo->meta_format = meta_format; + + histo->pad.flags = MEDIA_PAD_FL_SINK; + histo->video.vfl_dir = VFL_DIR_RX; + + mutex_init(&histo->lock); + spin_lock_init(&histo->irqlock); + INIT_LIST_HEAD(&histo->irqqueue); + init_waitqueue_head(&histo->wait_queue); + + /* Initialize the VSP entity... */ + histo->entity.ops = ops; + histo->entity.type = type; + + ret = vsp1_entity_init(vsp1, &histo->entity, name, 2, &histo_ops, + MEDIA_ENT_F_PROC_VIDEO_STATISTICS); + if (ret < 0) + return ret; + + /* ... and the media entity... */ + ret = media_entity_pads_init(&histo->video.entity, 1, &histo->pad); + if (ret < 0) + return ret; + + /* ... and the video node... */ + histo->video.v4l2_dev = &vsp1->v4l2_dev; + histo->video.fops = &histo_v4l2_fops; + snprintf(histo->video.name, sizeof(histo->video.name), + "%s histo", histo->entity.subdev.name); + histo->video.vfl_type = VFL_TYPE_VIDEO; + histo->video.release = video_device_release_empty; + histo->video.ioctl_ops = &histo_v4l2_ioctl_ops; + histo->video.device_caps = V4L2_CAP_META_CAPTURE | V4L2_CAP_STREAMING; + + video_set_drvdata(&histo->video, histo); + + /* ... and the buffers queue... */ + histo->queue.type = V4L2_BUF_TYPE_META_CAPTURE; + histo->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + histo->queue.lock = &histo->lock; + histo->queue.drv_priv = histo; + histo->queue.buf_struct_size = sizeof(struct vsp1_histogram_buffer); + histo->queue.ops = &histo_video_queue_qops; + histo->queue.mem_ops = &vb2_vmalloc_memops; + histo->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + histo->queue.dev = vsp1->dev; + ret = vb2_queue_init(&histo->queue); + if (ret < 0) { + dev_err(vsp1->dev, "failed to initialize vb2 queue\n"); + goto error; + } + + /* ... and register the video device. */ + histo->video.queue = &histo->queue; + ret = video_register_device(&histo->video, VFL_TYPE_VIDEO, -1); + if (ret < 0) { + dev_err(vsp1->dev, "failed to register video device\n"); + goto error; + } + + return 0; + +error: + vsp1_histogram_cleanup(histo); + return ret; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_histo.h b/drivers/media/platform/renesas/vsp1/vsp1_histo.h new file mode 100644 index 000000000..06f029846 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_histo.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_histo.h -- R-Car VSP1 Histogram API + * + * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2016 Laurent Pinchart + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_HISTO_H__ +#define __VSP1_HISTO_H__ + +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> + +#include <media/media-entity.h> +#include <media/v4l2-dev.h> +#include <media/videobuf2-v4l2.h> + +#include "vsp1_entity.h" + +struct vsp1_device; + +#define HISTO_PAD_SINK 0 +#define HISTO_PAD_SOURCE 1 + +struct vsp1_histogram_buffer { + struct vb2_v4l2_buffer buf; + struct list_head queue; + void *addr; +}; + +struct vsp1_histogram { + struct vsp1_entity entity; + struct video_device video; + struct media_pad pad; + + const u32 *formats; + unsigned int num_formats; + size_t data_size; + u32 meta_format; + + struct mutex lock; + struct vb2_queue queue; + + spinlock_t irqlock; + struct list_head irqqueue; + + wait_queue_head_t wait_queue; + bool readout; +}; + +static inline struct vsp1_histogram *vdev_to_histo(struct video_device *vdev) +{ + return container_of(vdev, struct vsp1_histogram, video); +} + +static inline struct vsp1_histogram *subdev_to_histo(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_histogram, entity.subdev); +} + +int vsp1_histogram_init(struct vsp1_device *vsp1, struct vsp1_histogram *histo, + enum vsp1_entity_type type, const char *name, + const struct vsp1_entity_operations *ops, + const unsigned int *formats, unsigned int num_formats, + size_t data_size, u32 meta_format); +void vsp1_histogram_destroy(struct vsp1_entity *entity); + +struct vsp1_histogram_buffer * +vsp1_histogram_buffer_get(struct vsp1_histogram *histo); +void vsp1_histogram_buffer_complete(struct vsp1_histogram *histo, + struct vsp1_histogram_buffer *buf, + size_t size); + +#endif /* __VSP1_HISTO_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_hsit.c b/drivers/media/platform/renesas/vsp1/vsp1_hsit.c new file mode 100644 index 000000000..361a87038 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_hsit.c @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_hsit.c -- R-Car VSP1 Hue Saturation value (Inverse) Transform + * + * Copyright (C) 2013 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_hsit.h" + +#define HSIT_MIN_SIZE 4U +#define HSIT_MAX_SIZE 8190U + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline void vsp1_hsit_write(struct vsp1_hsit *hsit, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg, data); +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static int hsit_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct vsp1_hsit *hsit = to_hsit(subdev); + + if (code->index > 0) + return -EINVAL; + + if ((code->pad == HSIT_PAD_SINK && !hsit->inverse) | + (code->pad == HSIT_PAD_SOURCE && hsit->inverse)) + code->code = MEDIA_BUS_FMT_ARGB8888_1X32; + else + code->code = MEDIA_BUS_FMT_AHSV8888_1X32; + + return 0; +} + +static int hsit_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + return vsp1_subdev_enum_frame_size(subdev, sd_state, fse, + HSIT_MIN_SIZE, + HSIT_MIN_SIZE, HSIT_MAX_SIZE, + HSIT_MAX_SIZE); +} + +static int hsit_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct vsp1_hsit *hsit = to_hsit(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + int ret = 0; + + mutex_lock(&hsit->entity.lock); + + config = vsp1_entity_get_pad_config(&hsit->entity, sd_state, + fmt->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + format = vsp1_entity_get_pad_format(&hsit->entity, config, fmt->pad); + + if (fmt->pad == HSIT_PAD_SOURCE) { + /* + * The HST and HSI output format code and resolution can't be + * modified. + */ + fmt->format = *format; + goto done; + } + + format->code = hsit->inverse ? MEDIA_BUS_FMT_AHSV8888_1X32 + : MEDIA_BUS_FMT_ARGB8888_1X32; + format->width = clamp_t(unsigned int, fmt->format.width, + HSIT_MIN_SIZE, HSIT_MAX_SIZE); + format->height = clamp_t(unsigned int, fmt->format.height, + HSIT_MIN_SIZE, HSIT_MAX_SIZE); + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + fmt->format = *format; + + /* Propagate the format to the source pad. */ + format = vsp1_entity_get_pad_format(&hsit->entity, config, + HSIT_PAD_SOURCE); + *format = fmt->format; + format->code = hsit->inverse ? MEDIA_BUS_FMT_ARGB8888_1X32 + : MEDIA_BUS_FMT_AHSV8888_1X32; + +done: + mutex_unlock(&hsit->entity.lock); + return ret; +} + +static const struct v4l2_subdev_pad_ops hsit_pad_ops = { + .init_cfg = vsp1_entity_init_cfg, + .enum_mbus_code = hsit_enum_mbus_code, + .enum_frame_size = hsit_enum_frame_size, + .get_fmt = vsp1_subdev_get_pad_format, + .set_fmt = hsit_set_format, +}; + +static const struct v4l2_subdev_ops hsit_ops = { + .pad = &hsit_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void hsit_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_hsit *hsit = to_hsit(&entity->subdev); + + if (hsit->inverse) + vsp1_hsit_write(hsit, dlb, VI6_HSI_CTRL, VI6_HSI_CTRL_EN); + else + vsp1_hsit_write(hsit, dlb, VI6_HST_CTRL, VI6_HST_CTRL_EN); +} + +static const struct vsp1_entity_operations hsit_entity_ops = { + .configure_stream = hsit_configure_stream, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +struct vsp1_hsit *vsp1_hsit_create(struct vsp1_device *vsp1, bool inverse) +{ + struct vsp1_hsit *hsit; + int ret; + + hsit = devm_kzalloc(vsp1->dev, sizeof(*hsit), GFP_KERNEL); + if (hsit == NULL) + return ERR_PTR(-ENOMEM); + + hsit->inverse = inverse; + + hsit->entity.ops = &hsit_entity_ops; + + if (inverse) + hsit->entity.type = VSP1_ENTITY_HSI; + else + hsit->entity.type = VSP1_ENTITY_HST; + + ret = vsp1_entity_init(vsp1, &hsit->entity, inverse ? "hsi" : "hst", + 2, &hsit_ops, + MEDIA_ENT_F_PROC_VIDEO_PIXEL_ENC_CONV); + if (ret < 0) + return ERR_PTR(ret); + + return hsit; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_hsit.h b/drivers/media/platform/renesas/vsp1/vsp1_hsit.h new file mode 100644 index 000000000..a658b1aa4 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_hsit.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_hsit.h -- R-Car VSP1 Hue Saturation value (Inverse) Transform + * + * Copyright (C) 2013 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_HSIT_H__ +#define __VSP1_HSIT_H__ + +#include <media/media-entity.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_entity.h" + +struct vsp1_device; + +#define HSIT_PAD_SINK 0 +#define HSIT_PAD_SOURCE 1 + +struct vsp1_hsit { + struct vsp1_entity entity; + bool inverse; +}; + +static inline struct vsp1_hsit *to_hsit(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_hsit, entity.subdev); +} + +struct vsp1_hsit *vsp1_hsit_create(struct vsp1_device *vsp1, bool inverse); + +#endif /* __VSP1_HSIT_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_lif.c b/drivers/media/platform/renesas/vsp1/vsp1_lif.c new file mode 100644 index 000000000..186a5730e --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_lif.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_lif.c -- R-Car VSP1 LCD Controller Interface + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_lif.h" + +#define LIF_MIN_SIZE 2U +#define LIF_MAX_SIZE 8190U + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline void vsp1_lif_write(struct vsp1_lif *lif, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg + lif->entity.index * VI6_LIF_OFFSET, + data); +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static const unsigned int lif_codes[] = { + MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AYUV8_1X32, +}; + +static int lif_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, lif_codes, + ARRAY_SIZE(lif_codes)); +} + +static int lif_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + return vsp1_subdev_enum_frame_size(subdev, sd_state, fse, + LIF_MIN_SIZE, + LIF_MIN_SIZE, LIF_MAX_SIZE, + LIF_MAX_SIZE); +} + +static int lif_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + return vsp1_subdev_set_pad_format(subdev, sd_state, fmt, lif_codes, + ARRAY_SIZE(lif_codes), + LIF_MIN_SIZE, LIF_MIN_SIZE, + LIF_MAX_SIZE, LIF_MAX_SIZE); +} + +static const struct v4l2_subdev_pad_ops lif_pad_ops = { + .init_cfg = vsp1_entity_init_cfg, + .enum_mbus_code = lif_enum_mbus_code, + .enum_frame_size = lif_enum_frame_size, + .get_fmt = vsp1_subdev_get_pad_format, + .set_fmt = lif_set_format, +}; + +static const struct v4l2_subdev_ops lif_ops = { + .pad = &lif_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void lif_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + const struct v4l2_mbus_framefmt *format; + struct vsp1_lif *lif = to_lif(&entity->subdev); + unsigned int hbth; + unsigned int obth; + unsigned int lbth; + + format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.config, + LIF_PAD_SOURCE); + + switch (entity->vsp1->version & VI6_IP_VERSION_MODEL_MASK) { + case VI6_IP_VERSION_MODEL_VSPD_GEN2: + case VI6_IP_VERSION_MODEL_VSPD_V2H: + hbth = 1536; + obth = min(128U, (format->width + 1) / 2 * format->height - 4); + lbth = 1520; + break; + + case VI6_IP_VERSION_MODEL_VSPDL_GEN3: + case VI6_IP_VERSION_MODEL_VSPD_V3: + case VI6_IP_VERSION_MODEL_VSPD_RZG2L: + hbth = 0; + obth = 1500; + lbth = 0; + break; + + case VI6_IP_VERSION_MODEL_VSPD_GEN3: + default: + hbth = 0; + obth = 3000; + lbth = 0; + break; + } + + vsp1_lif_write(lif, dlb, VI6_LIF_CSBTH, + (hbth << VI6_LIF_CSBTH_HBTH_SHIFT) | + (lbth << VI6_LIF_CSBTH_LBTH_SHIFT)); + + vsp1_lif_write(lif, dlb, VI6_LIF_CTRL, + (obth << VI6_LIF_CTRL_OBTH_SHIFT) | + (format->code == 0 ? VI6_LIF_CTRL_CFMT : 0) | + VI6_LIF_CTRL_REQSEL | VI6_LIF_CTRL_LIF_EN); + + /* + * On R-Car V3M and RZ/G2L the LIF0 buffer attribute register has to be + * set to a non-default value to guarantee proper operation (otherwise + * artifacts may appear on the output). The value required by the + * manual is not explained but is likely a buffer size or threshold. + */ + if (vsp1_feature(entity->vsp1, VSP1_HAS_NON_ZERO_LBA)) + vsp1_lif_write(lif, dlb, VI6_LIF_LBA, + VI6_LIF_LBA_LBA0 | + (1536 << VI6_LIF_LBA_LBA1_SHIFT)); +} + +static const struct vsp1_entity_operations lif_entity_ops = { + .configure_stream = lif_configure_stream, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +struct vsp1_lif *vsp1_lif_create(struct vsp1_device *vsp1, unsigned int index) +{ + struct vsp1_lif *lif; + int ret; + + lif = devm_kzalloc(vsp1->dev, sizeof(*lif), GFP_KERNEL); + if (lif == NULL) + return ERR_PTR(-ENOMEM); + + lif->entity.ops = &lif_entity_ops; + lif->entity.type = VSP1_ENTITY_LIF; + lif->entity.index = index; + + /* + * The LIF is never exposed to userspace, but media entity registration + * requires a function to be set. Use PROC_VIDEO_PIXEL_FORMATTER just to + * avoid triggering a WARN_ON(), the value won't be seen anywhere. + */ + ret = vsp1_entity_init(vsp1, &lif->entity, "lif", 2, &lif_ops, + MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER); + if (ret < 0) + return ERR_PTR(ret); + + return lif; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_lif.h b/drivers/media/platform/renesas/vsp1/vsp1_lif.h new file mode 100644 index 000000000..71a4eda9c --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_lif.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_lif.h -- R-Car VSP1 LCD Controller Interface + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_LIF_H__ +#define __VSP1_LIF_H__ + +#include <media/media-entity.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_entity.h" + +struct vsp1_device; + +#define LIF_PAD_SINK 0 +#define LIF_PAD_SOURCE 1 + +struct vsp1_lif { + struct vsp1_entity entity; +}; + +static inline struct vsp1_lif *to_lif(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_lif, entity.subdev); +} + +struct vsp1_lif *vsp1_lif_create(struct vsp1_device *vsp1, unsigned int index); + +#endif /* __VSP1_LIF_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_lut.c b/drivers/media/platform/renesas/vsp1/vsp1_lut.c new file mode 100644 index 000000000..ac6802a32 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_lut.c @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_lut.c -- R-Car VSP1 Look-Up Table + * + * Copyright (C) 2013 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_lut.h" + +#define LUT_MIN_SIZE 4U +#define LUT_MAX_SIZE 8190U + +#define LUT_SIZE 256 + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline void vsp1_lut_write(struct vsp1_lut *lut, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg, data); +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +#define V4L2_CID_VSP1_LUT_TABLE (V4L2_CID_USER_BASE | 0x1001) + +static int lut_set_table(struct vsp1_lut *lut, struct v4l2_ctrl *ctrl) +{ + struct vsp1_dl_body *dlb; + unsigned int i; + + dlb = vsp1_dl_body_get(lut->pool); + if (!dlb) + return -ENOMEM; + + for (i = 0; i < LUT_SIZE; ++i) + vsp1_dl_body_write(dlb, VI6_LUT_TABLE + 4 * i, + ctrl->p_new.p_u32[i]); + + spin_lock_irq(&lut->lock); + swap(lut->lut, dlb); + spin_unlock_irq(&lut->lock); + + vsp1_dl_body_put(dlb); + return 0; +} + +static int lut_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct vsp1_lut *lut = + container_of(ctrl->handler, struct vsp1_lut, ctrls); + + switch (ctrl->id) { + case V4L2_CID_VSP1_LUT_TABLE: + lut_set_table(lut, ctrl); + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops lut_ctrl_ops = { + .s_ctrl = lut_s_ctrl, +}; + +static const struct v4l2_ctrl_config lut_table_control = { + .ops = &lut_ctrl_ops, + .id = V4L2_CID_VSP1_LUT_TABLE, + .name = "Look-Up Table", + .type = V4L2_CTRL_TYPE_U32, + .min = 0x00000000, + .max = 0x00ffffff, + .step = 1, + .def = 0, + .dims = { LUT_SIZE }, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Pad Operations + */ + +static const unsigned int lut_codes[] = { + MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AHSV8888_1X32, + MEDIA_BUS_FMT_AYUV8_1X32, +}; + +static int lut_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, lut_codes, + ARRAY_SIZE(lut_codes)); +} + +static int lut_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + return vsp1_subdev_enum_frame_size(subdev, sd_state, fse, + LUT_MIN_SIZE, + LUT_MIN_SIZE, LUT_MAX_SIZE, + LUT_MAX_SIZE); +} + +static int lut_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + return vsp1_subdev_set_pad_format(subdev, sd_state, fmt, lut_codes, + ARRAY_SIZE(lut_codes), + LUT_MIN_SIZE, LUT_MIN_SIZE, + LUT_MAX_SIZE, LUT_MAX_SIZE); +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static const struct v4l2_subdev_pad_ops lut_pad_ops = { + .init_cfg = vsp1_entity_init_cfg, + .enum_mbus_code = lut_enum_mbus_code, + .enum_frame_size = lut_enum_frame_size, + .get_fmt = vsp1_subdev_get_pad_format, + .set_fmt = lut_set_format, +}; + +static const struct v4l2_subdev_ops lut_ops = { + .pad = &lut_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void lut_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_lut *lut = to_lut(&entity->subdev); + + vsp1_lut_write(lut, dlb, VI6_LUT_CTRL, VI6_LUT_CTRL_EN); +} + +static void lut_configure_frame(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_lut *lut = to_lut(&entity->subdev); + struct vsp1_dl_body *lut_dlb; + unsigned long flags; + + spin_lock_irqsave(&lut->lock, flags); + lut_dlb = lut->lut; + lut->lut = NULL; + spin_unlock_irqrestore(&lut->lock, flags); + + if (lut_dlb) { + vsp1_dl_list_add_body(dl, lut_dlb); + + /* Release our local reference. */ + vsp1_dl_body_put(lut_dlb); + } +} + +static void lut_destroy(struct vsp1_entity *entity) +{ + struct vsp1_lut *lut = to_lut(&entity->subdev); + + vsp1_dl_body_pool_destroy(lut->pool); +} + +static const struct vsp1_entity_operations lut_entity_ops = { + .configure_stream = lut_configure_stream, + .configure_frame = lut_configure_frame, + .destroy = lut_destroy, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +struct vsp1_lut *vsp1_lut_create(struct vsp1_device *vsp1) +{ + struct vsp1_lut *lut; + int ret; + + lut = devm_kzalloc(vsp1->dev, sizeof(*lut), GFP_KERNEL); + if (lut == NULL) + return ERR_PTR(-ENOMEM); + + spin_lock_init(&lut->lock); + + lut->entity.ops = &lut_entity_ops; + lut->entity.type = VSP1_ENTITY_LUT; + + ret = vsp1_entity_init(vsp1, &lut->entity, "lut", 2, &lut_ops, + MEDIA_ENT_F_PROC_VIDEO_LUT); + if (ret < 0) + return ERR_PTR(ret); + + /* + * Pre-allocate a body pool, with 3 bodies allowing a userspace update + * before the hardware has committed a previous set of tables, handling + * both the queued and pending dl entries. + */ + lut->pool = vsp1_dl_body_pool_create(vsp1, 3, LUT_SIZE, 0); + if (!lut->pool) + return ERR_PTR(-ENOMEM); + + /* Initialize the control handler. */ + v4l2_ctrl_handler_init(&lut->ctrls, 1); + v4l2_ctrl_new_custom(&lut->ctrls, &lut_table_control, NULL); + + lut->entity.subdev.ctrl_handler = &lut->ctrls; + + if (lut->ctrls.error) { + dev_err(vsp1->dev, "lut: failed to initialize controls\n"); + ret = lut->ctrls.error; + vsp1_entity_destroy(&lut->entity); + return ERR_PTR(ret); + } + + v4l2_ctrl_handler_setup(&lut->ctrls); + + return lut; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_lut.h b/drivers/media/platform/renesas/vsp1/vsp1_lut.h new file mode 100644 index 000000000..8cb0df1b7 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_lut.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_lut.h -- R-Car VSP1 Look-Up Table + * + * Copyright (C) 2013 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_LUT_H__ +#define __VSP1_LUT_H__ + +#include <linux/spinlock.h> + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_entity.h" + +struct vsp1_device; + +#define LUT_PAD_SINK 0 +#define LUT_PAD_SOURCE 1 + +struct vsp1_lut { + struct vsp1_entity entity; + + struct v4l2_ctrl_handler ctrls; + + spinlock_t lock; + struct vsp1_dl_body *lut; + struct vsp1_dl_body_pool *pool; +}; + +static inline struct vsp1_lut *to_lut(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_lut, entity.subdev); +} + +struct vsp1_lut *vsp1_lut_create(struct vsp1_device *vsp1); + +#endif /* __VSP1_LUT_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_pipe.c b/drivers/media/platform/renesas/vsp1/vsp1_pipe.c new file mode 100644 index 000000000..f72ac01c2 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_pipe.c @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_pipe.c -- R-Car VSP1 Pipeline + * + * Copyright (C) 2013-2015 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/delay.h> +#include <linux/list.h> +#include <linux/sched.h> +#include <linux/wait.h> + +#include <media/media-entity.h> +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_brx.h" +#include "vsp1_dl.h" +#include "vsp1_entity.h" +#include "vsp1_hgo.h" +#include "vsp1_hgt.h" +#include "vsp1_pipe.h" +#include "vsp1_rwpf.h" +#include "vsp1_uds.h" + +/* ----------------------------------------------------------------------------- + * Helper Functions + */ + +static const struct vsp1_format_info vsp1_video_formats[] = { + { V4L2_PIX_FMT_RGB332, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGB_332, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 8, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_ARGB444, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_ARGB_4444, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_XRGB444, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_XRGB_4444, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_RGBA444, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGBA_4444, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_RGBX444, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGBX_4444, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_ABGR444, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_ABGR_4444, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_XBGR444, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_ABGR_4444, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_BGRA444, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_BGRA_4444, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_BGRX444, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_BGRA_4444, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_ARGB555, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_ARGB_1555, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_XRGB555, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_XRGB_1555, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_RGBA555, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGBA_5551, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_RGBX555, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGBX_5551, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_ABGR555, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_ABGR_1555, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_XBGR555, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_ABGR_1555, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_BGRA555, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_BGRA_5551, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_BGRX555, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_BGRA_5551, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_RGB565, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGB_565, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS, + 1, { 16, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_BGR24, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_BGR_888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 24, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_RGB24, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGB_888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 24, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_ABGR32, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_ARGB_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS, + 1, { 32, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_XBGR32, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_ARGB_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS, + 1, { 32, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_BGRA32, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGBA_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS, + 1, { 32, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_BGRX32, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGBA_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS, + 1, { 32, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_RGBA32, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGBA_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 32, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_RGBX32, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_RGBA_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 32, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_ARGB32, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_ARGB_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 32, 0, 0 }, false, false, 1, 1, true }, + { V4L2_PIX_FMT_XRGB32, MEDIA_BUS_FMT_ARGB8888_1X32, + VI6_FMT_ARGB_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 32, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_HSV24, MEDIA_BUS_FMT_AHSV8888_1X32, + VI6_FMT_RGB_888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 24, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_HSV32, MEDIA_BUS_FMT_AHSV8888_1X32, + VI6_FMT_ARGB_8888, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 32, 0, 0 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_UYVY, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_YUYV_422, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 16, 0, 0 }, false, false, 2, 1, false }, + { V4L2_PIX_FMT_VYUY, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_YUYV_422, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 16, 0, 0 }, false, true, 2, 1, false }, + { V4L2_PIX_FMT_YUYV, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_YUYV_422, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 16, 0, 0 }, true, false, 2, 1, false }, + { V4L2_PIX_FMT_YVYU, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_YUYV_422, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 1, { 16, 0, 0 }, true, true, 2, 1, false }, + { V4L2_PIX_FMT_NV12M, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_Y_UV_420, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 2, { 8, 16, 0 }, false, false, 2, 2, false }, + { V4L2_PIX_FMT_NV21M, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_Y_UV_420, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 2, { 8, 16, 0 }, false, true, 2, 2, false }, + { V4L2_PIX_FMT_NV16M, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_Y_UV_422, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 2, { 8, 16, 0 }, false, false, 2, 1, false }, + { V4L2_PIX_FMT_NV61M, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_Y_UV_422, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 2, { 8, 16, 0 }, false, true, 2, 1, false }, + { V4L2_PIX_FMT_YUV420M, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_Y_U_V_420, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 3, { 8, 8, 8 }, false, false, 2, 2, false }, + { V4L2_PIX_FMT_YVU420M, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_Y_U_V_420, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 3, { 8, 8, 8 }, false, true, 2, 2, false }, + { V4L2_PIX_FMT_YUV422M, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_Y_U_V_422, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 3, { 8, 8, 8 }, false, false, 2, 1, false }, + { V4L2_PIX_FMT_YVU422M, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_Y_U_V_422, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 3, { 8, 8, 8 }, false, true, 2, 1, false }, + { V4L2_PIX_FMT_YUV444M, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_Y_U_V_444, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 3, { 8, 8, 8 }, false, false, 1, 1, false }, + { V4L2_PIX_FMT_YVU444M, MEDIA_BUS_FMT_AYUV8_1X32, + VI6_FMT_Y_U_V_444, VI6_RPF_DSWAP_P_LLS | VI6_RPF_DSWAP_P_LWS | + VI6_RPF_DSWAP_P_WDS | VI6_RPF_DSWAP_P_BTS, + 3, { 8, 8, 8 }, false, true, 1, 1, false }, +}; + +/** + * vsp1_get_format_info - Retrieve format information for a 4CC + * @vsp1: the VSP1 device + * @fourcc: the format 4CC + * + * Return a pointer to the format information structure corresponding to the + * given V4L2 format 4CC, or NULL if no corresponding format can be found. + */ +const struct vsp1_format_info *vsp1_get_format_info(struct vsp1_device *vsp1, + u32 fourcc) +{ + unsigned int i; + + /* Special case, the VYUY and HSV formats are supported on Gen2 only. */ + if (vsp1->info->gen != 2) { + switch (fourcc) { + case V4L2_PIX_FMT_VYUY: + case V4L2_PIX_FMT_HSV24: + case V4L2_PIX_FMT_HSV32: + return NULL; + } + } + + for (i = 0; i < ARRAY_SIZE(vsp1_video_formats); ++i) { + const struct vsp1_format_info *info = &vsp1_video_formats[i]; + + if (info->fourcc == fourcc) + return info; + } + + return NULL; +} + +/* ----------------------------------------------------------------------------- + * Pipeline Management + */ + +void vsp1_pipeline_reset(struct vsp1_pipeline *pipe) +{ + struct vsp1_entity *entity; + unsigned int i; + + if (pipe->brx) { + struct vsp1_brx *brx = to_brx(&pipe->brx->subdev); + + for (i = 0; i < ARRAY_SIZE(brx->inputs); ++i) + brx->inputs[i].rpf = NULL; + } + + for (i = 0; i < ARRAY_SIZE(pipe->inputs); ++i) + pipe->inputs[i] = NULL; + + pipe->output = NULL; + + list_for_each_entry(entity, &pipe->entities, list_pipe) + entity->pipe = NULL; + + INIT_LIST_HEAD(&pipe->entities); + pipe->state = VSP1_PIPELINE_STOPPED; + pipe->buffers_ready = 0; + pipe->num_inputs = 0; + pipe->brx = NULL; + pipe->hgo = NULL; + pipe->hgt = NULL; + pipe->lif = NULL; + pipe->uds = NULL; +} + +void vsp1_pipeline_init(struct vsp1_pipeline *pipe) +{ + mutex_init(&pipe->lock); + spin_lock_init(&pipe->irqlock); + init_waitqueue_head(&pipe->wq); + kref_init(&pipe->kref); + + INIT_LIST_HEAD(&pipe->entities); + pipe->state = VSP1_PIPELINE_STOPPED; +} + +/* Must be called with the pipe irqlock held. */ +void vsp1_pipeline_run(struct vsp1_pipeline *pipe) +{ + struct vsp1_device *vsp1 = pipe->output->entity.vsp1; + + if (pipe->state == VSP1_PIPELINE_STOPPED) { + vsp1_write(vsp1, VI6_CMD(pipe->output->entity.index), + VI6_CMD_STRCMD); + pipe->state = VSP1_PIPELINE_RUNNING; + } + + pipe->buffers_ready = 0; +} + +bool vsp1_pipeline_stopped(struct vsp1_pipeline *pipe) +{ + unsigned long flags; + bool stopped; + + spin_lock_irqsave(&pipe->irqlock, flags); + stopped = pipe->state == VSP1_PIPELINE_STOPPED; + spin_unlock_irqrestore(&pipe->irqlock, flags); + + return stopped; +} + +int vsp1_pipeline_stop(struct vsp1_pipeline *pipe) +{ + struct vsp1_device *vsp1 = pipe->output->entity.vsp1; + struct vsp1_entity *entity; + unsigned long flags; + int ret; + + if (pipe->lif) { + /* + * When using display lists in continuous frame mode the only + * way to stop the pipeline is to reset the hardware. + */ + ret = vsp1_reset_wpf(vsp1, pipe->output->entity.index); + if (ret == 0) { + spin_lock_irqsave(&pipe->irqlock, flags); + pipe->state = VSP1_PIPELINE_STOPPED; + spin_unlock_irqrestore(&pipe->irqlock, flags); + } + } else { + /* Otherwise just request a stop and wait. */ + spin_lock_irqsave(&pipe->irqlock, flags); + if (pipe->state == VSP1_PIPELINE_RUNNING) + pipe->state = VSP1_PIPELINE_STOPPING; + spin_unlock_irqrestore(&pipe->irqlock, flags); + + ret = wait_event_timeout(pipe->wq, vsp1_pipeline_stopped(pipe), + msecs_to_jiffies(500)); + ret = ret == 0 ? -ETIMEDOUT : 0; + } + + list_for_each_entry(entity, &pipe->entities, list_pipe) { + if (entity->route && entity->route->reg) + vsp1_write(vsp1, entity->route->reg, + VI6_DPR_NODE_UNUSED); + } + + if (pipe->hgo) + vsp1_write(vsp1, VI6_DPR_HGO_SMPPT, + (7 << VI6_DPR_SMPPT_TGW_SHIFT) | + (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT)); + + if (pipe->hgt) + vsp1_write(vsp1, VI6_DPR_HGT_SMPPT, + (7 << VI6_DPR_SMPPT_TGW_SHIFT) | + (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT)); + + v4l2_subdev_call(&pipe->output->entity.subdev, video, s_stream, 0); + + return ret; +} + +bool vsp1_pipeline_ready(struct vsp1_pipeline *pipe) +{ + unsigned int mask; + + mask = ((1 << pipe->num_inputs) - 1) << 1; + if (!pipe->lif) + mask |= 1 << 0; + + return pipe->buffers_ready == mask; +} + +void vsp1_pipeline_frame_end(struct vsp1_pipeline *pipe) +{ + unsigned int flags; + + if (pipe == NULL) + return; + + /* + * If the DL commit raced with the frame end interrupt, the commit ends + * up being postponed by one frame. The returned flags tell whether the + * active frame was finished or postponed. + */ + flags = vsp1_dlm_irq_frame_end(pipe->output->dlm); + + if (pipe->hgo) + vsp1_hgo_frame_end(pipe->hgo); + + if (pipe->hgt) + vsp1_hgt_frame_end(pipe->hgt); + + /* + * Regardless of frame completion we still need to notify the pipe + * frame_end to account for vblank events. + */ + if (pipe->frame_end) + pipe->frame_end(pipe, flags); + + pipe->sequence++; +} + +/* + * Propagate the alpha value through the pipeline. + * + * As the UDS has restricted scaling capabilities when the alpha component needs + * to be scaled, we disable alpha scaling when the UDS input has a fixed alpha + * value. The UDS then outputs a fixed alpha value which needs to be programmed + * from the input RPF alpha. + */ +void vsp1_pipeline_propagate_alpha(struct vsp1_pipeline *pipe, + struct vsp1_dl_body *dlb, unsigned int alpha) +{ + if (!pipe->uds) + return; + + /* + * The BRU and BRS background color has a fixed alpha value set to 255, + * the output alpha value is thus always equal to 255. + */ + if (pipe->uds_input->type == VSP1_ENTITY_BRU || + pipe->uds_input->type == VSP1_ENTITY_BRS) + alpha = 255; + + vsp1_uds_set_alpha(pipe->uds, dlb, alpha); +} + +/* + * Propagate the partition calculations through the pipeline + * + * Work backwards through the pipe, allowing each entity to update the partition + * parameters based on its configuration, and the entity connected to its + * source. Each entity must produce the partition required for the previous + * entity in the pipeline. + */ +void vsp1_pipeline_propagate_partition(struct vsp1_pipeline *pipe, + struct vsp1_partition *partition, + unsigned int index, + struct vsp1_partition_window *window) +{ + struct vsp1_entity *entity; + + list_for_each_entry_reverse(entity, &pipe->entities, list_pipe) { + if (entity->ops->partition) + entity->ops->partition(entity, pipe, partition, index, + window); + } +} + diff --git a/drivers/media/platform/renesas/vsp1/vsp1_pipe.h b/drivers/media/platform/renesas/vsp1/vsp1_pipe.h new file mode 100644 index 000000000..ae646c9ef --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_pipe.h @@ -0,0 +1,175 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_pipe.h -- R-Car VSP1 Pipeline + * + * Copyright (C) 2013-2015 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_PIPE_H__ +#define __VSP1_PIPE_H__ + +#include <linux/kref.h> +#include <linux/list.h> +#include <linux/spinlock.h> +#include <linux/wait.h> + +#include <media/media-entity.h> + +struct vsp1_dl_list; +struct vsp1_rwpf; + +/* + * struct vsp1_format_info - VSP1 video format description + * @fourcc: V4L2 pixel format FCC identifier + * @mbus: media bus format code + * @hwfmt: VSP1 hardware format + * @swap: swap register control + * @planes: number of planes + * @bpp: bits per pixel + * @swap_yc: the Y and C components are swapped (Y comes before C) + * @swap_uv: the U and V components are swapped (V comes before U) + * @hsub: horizontal subsampling factor + * @vsub: vertical subsampling factor + * @alpha: has an alpha channel + */ +struct vsp1_format_info { + u32 fourcc; + unsigned int mbus; + unsigned int hwfmt; + unsigned int swap; + unsigned int planes; + unsigned int bpp[3]; + bool swap_yc; + bool swap_uv; + unsigned int hsub; + unsigned int vsub; + bool alpha; +}; + +enum vsp1_pipeline_state { + VSP1_PIPELINE_STOPPED, + VSP1_PIPELINE_RUNNING, + VSP1_PIPELINE_STOPPING, +}; + +/* + * struct vsp1_partition_window - Partition window coordinates + * @left: horizontal coordinate of the partition start in pixels relative to the + * left edge of the image + * @width: partition width in pixels + */ +struct vsp1_partition_window { + unsigned int left; + unsigned int width; +}; + +/* + * struct vsp1_partition - A description of a slice for the partition algorithm + * @rpf: The RPF partition window configuration + * @uds_sink: The UDS input partition window configuration + * @uds_source: The UDS output partition window configuration + * @sru: The SRU partition window configuration + * @wpf: The WPF partition window configuration + */ +struct vsp1_partition { + struct vsp1_partition_window rpf; + struct vsp1_partition_window uds_sink; + struct vsp1_partition_window uds_source; + struct vsp1_partition_window sru; + struct vsp1_partition_window wpf; +}; + +/* + * struct vsp1_pipeline - A VSP1 hardware pipeline + * @pipe: the media pipeline + * @irqlock: protects the pipeline state + * @state: current state + * @wq: wait queue to wait for state change completion + * @frame_end: frame end interrupt handler + * @lock: protects the pipeline use count and stream count + * @kref: pipeline reference count + * @stream_count: number of streaming video nodes + * @buffers_ready: bitmask of RPFs and WPFs with at least one buffer available + * @sequence: frame sequence number + * @num_inputs: number of RPFs + * @inputs: array of RPFs in the pipeline (indexed by RPF index) + * @output: WPF at the output of the pipeline + * @brx: BRx entity, if present + * @hgo: HGO entity, if present + * @hgt: HGT entity, if present + * @lif: LIF entity, if present + * @uds: UDS entity, if present + * @uds_input: entity at the input of the UDS, if the UDS is present + * @entities: list of entities in the pipeline + * @stream_config: cached stream configuration for video pipelines + * @configured: when false the @stream_config shall be written to the hardware + * @interlaced: True when the pipeline is configured in interlaced mode + * @partitions: The number of partitions used to process one frame + * @partition: The current partition for configuration to process + * @part_table: The pre-calculated partitions used by the pipeline + */ +struct vsp1_pipeline { + struct media_pipeline pipe; + + spinlock_t irqlock; + enum vsp1_pipeline_state state; + wait_queue_head_t wq; + + void (*frame_end)(struct vsp1_pipeline *pipe, unsigned int completion); + + struct mutex lock; + struct kref kref; + unsigned int stream_count; + unsigned int buffers_ready; + unsigned int sequence; + + unsigned int num_inputs; + struct vsp1_rwpf *inputs[VSP1_MAX_RPF]; + struct vsp1_rwpf *output; + struct vsp1_entity *brx; + struct vsp1_entity *hgo; + struct vsp1_entity *hgt; + struct vsp1_entity *lif; + struct vsp1_entity *uds; + struct vsp1_entity *uds_input; + + /* + * The order of this list must be identical to the order of the entities + * in the pipeline, as it is assumed by the partition algorithm that we + * can walk this list in sequence. + */ + struct list_head entities; + + struct vsp1_dl_body *stream_config; + bool configured; + bool interlaced; + + unsigned int partitions; + struct vsp1_partition *partition; + struct vsp1_partition *part_table; +}; + +void vsp1_pipeline_reset(struct vsp1_pipeline *pipe); +void vsp1_pipeline_init(struct vsp1_pipeline *pipe); + +void vsp1_pipeline_run(struct vsp1_pipeline *pipe); +bool vsp1_pipeline_stopped(struct vsp1_pipeline *pipe); +int vsp1_pipeline_stop(struct vsp1_pipeline *pipe); +bool vsp1_pipeline_ready(struct vsp1_pipeline *pipe); + +void vsp1_pipeline_frame_end(struct vsp1_pipeline *pipe); + +void vsp1_pipeline_propagate_alpha(struct vsp1_pipeline *pipe, + struct vsp1_dl_body *dlb, + unsigned int alpha); + +void vsp1_pipeline_propagate_partition(struct vsp1_pipeline *pipe, + struct vsp1_partition *partition, + unsigned int index, + struct vsp1_partition_window *window); + +const struct vsp1_format_info *vsp1_get_format_info(struct vsp1_device *vsp1, + u32 fourcc); + +#endif /* __VSP1_PIPE_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_regs.h b/drivers/media/platform/renesas/vsp1/vsp1_regs.h new file mode 100644 index 000000000..8928f4c6b --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_regs.h @@ -0,0 +1,860 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_regs.h -- R-Car VSP1 Registers Definitions + * + * Copyright (C) 2013 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#ifndef __VSP1_REGS_H__ +#define __VSP1_REGS_H__ + +/* ----------------------------------------------------------------------------- + * General Control Registers + */ + +#define VI6_CMD(n) (0x0000 + (n) * 4) +#define VI6_CMD_UPDHDR BIT(4) +#define VI6_CMD_STRCMD BIT(0) + +#define VI6_CLK_DCSWT 0x0018 +#define VI6_CLK_DCSWT_CSTPW_MASK (0xff << 8) +#define VI6_CLK_DCSWT_CSTPW_SHIFT 8 +#define VI6_CLK_DCSWT_CSTRW_MASK (0xff << 0) +#define VI6_CLK_DCSWT_CSTRW_SHIFT 0 + +#define VI6_SRESET 0x0028 +#define VI6_SRESET_SRTS(n) BIT(n) + +#define VI6_STATUS 0x0038 +#define VI6_STATUS_FLD_STD(n) BIT((n) + 28) +#define VI6_STATUS_SYS_ACT(n) BIT((n) + 8) + +#define VI6_WPF_IRQ_ENB(n) (0x0048 + (n) * 12) +#define VI6_WPF_IRQ_ENB_DFEE BIT(1) +#define VI6_WPF_IRQ_ENB_FREE BIT(0) + +#define VI6_WPF_IRQ_STA(n) (0x004c + (n) * 12) +#define VI6_WPF_IRQ_STA_DFE BIT(1) +#define VI6_WPF_IRQ_STA_FRE BIT(0) + +#define VI6_DISP_IRQ_ENB(n) (0x0078 + (n) * 60) +#define VI6_DISP_IRQ_ENB_DSTE BIT(8) +#define VI6_DISP_IRQ_ENB_MAEE BIT(5) +#define VI6_DISP_IRQ_ENB_LNEE(n) BIT(n) + +#define VI6_DISP_IRQ_STA(n) (0x007c + (n) * 60) +#define VI6_DISP_IRQ_STA_DST BIT(8) +#define VI6_DISP_IRQ_STA_MAE BIT(5) +#define VI6_DISP_IRQ_STA_LNE(n) BIT(n) + +#define VI6_WPF_LINE_COUNT(n) (0x0084 + (n) * 4) +#define VI6_WPF_LINE_COUNT_MASK (0x1fffff << 0) + +/* ----------------------------------------------------------------------------- + * Display List Control Registers + */ + +#define VI6_DL_CTRL 0x0100 +#define VI6_DL_CTRL_AR_WAIT_MASK (0xffff << 16) +#define VI6_DL_CTRL_AR_WAIT_SHIFT 16 +#define VI6_DL_CTRL_DC2 BIT(12) +#define VI6_DL_CTRL_DC1 BIT(8) +#define VI6_DL_CTRL_DC0 BIT(4) +#define VI6_DL_CTRL_CFM0 BIT(2) +#define VI6_DL_CTRL_NH0 BIT(1) +#define VI6_DL_CTRL_DLE BIT(0) + +#define VI6_DL_HDR_ADDR(n) (0x0104 + (n) * 4) + +#define VI6_DL_SWAP 0x0114 +#define VI6_DL_SWAP_LWS BIT(2) +#define VI6_DL_SWAP_WDS BIT(1) +#define VI6_DL_SWAP_BTS BIT(0) + +#define VI6_DL_EXT_CTRL(n) (0x011c + (n) * 36) +#define VI6_DL_EXT_CTRL_NWE BIT(16) +#define VI6_DL_EXT_CTRL_POLINT_MASK (0x3f << 8) +#define VI6_DL_EXT_CTRL_POLINT_SHIFT 8 +#define VI6_DL_EXT_CTRL_DLPRI BIT(5) +#define VI6_DL_EXT_CTRL_EXPRI BIT(4) +#define VI6_DL_EXT_CTRL_EXT BIT(0) + +#define VI6_DL_EXT_AUTOFLD_INT BIT(0) + +#define VI6_DL_BODY_SIZE 0x0120 +#define VI6_DL_BODY_SIZE_UPD BIT(24) +#define VI6_DL_BODY_SIZE_BS_MASK (0x1ffff << 0) +#define VI6_DL_BODY_SIZE_BS_SHIFT 0 + +/* ----------------------------------------------------------------------------- + * RPF Control Registers + */ + +#define VI6_RPF_OFFSET 0x100 + +#define VI6_RPF_SRC_BSIZE 0x0300 +#define VI6_RPF_SRC_BSIZE_BHSIZE_MASK (0x1fff << 16) +#define VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT 16 +#define VI6_RPF_SRC_BSIZE_BVSIZE_MASK (0x1fff << 0) +#define VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT 0 + +#define VI6_RPF_SRC_ESIZE 0x0304 +#define VI6_RPF_SRC_ESIZE_EHSIZE_MASK (0x1fff << 16) +#define VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT 16 +#define VI6_RPF_SRC_ESIZE_EVSIZE_MASK (0x1fff << 0) +#define VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT 0 + +#define VI6_RPF_INFMT 0x0308 +#define VI6_RPF_INFMT_VIR BIT(28) +#define VI6_RPF_INFMT_CIPM BIT(16) +#define VI6_RPF_INFMT_SPYCS BIT(15) +#define VI6_RPF_INFMT_SPUVS BIT(14) +#define VI6_RPF_INFMT_CEXT_ZERO (0 << 12) +#define VI6_RPF_INFMT_CEXT_EXT (1 << 12) +#define VI6_RPF_INFMT_CEXT_ONE (2 << 12) +#define VI6_RPF_INFMT_CEXT_MASK (3 << 12) +#define VI6_RPF_INFMT_RDTM_BT601 (0 << 9) +#define VI6_RPF_INFMT_RDTM_BT601_EXT (1 << 9) +#define VI6_RPF_INFMT_RDTM_BT709 (2 << 9) +#define VI6_RPF_INFMT_RDTM_BT709_EXT (3 << 9) +#define VI6_RPF_INFMT_RDTM_MASK (7 << 9) +#define VI6_RPF_INFMT_CSC BIT(8) +#define VI6_RPF_INFMT_RDFMT_MASK (0x7f << 0) +#define VI6_RPF_INFMT_RDFMT_SHIFT 0 + +#define VI6_RPF_DSWAP 0x030c +#define VI6_RPF_DSWAP_A_LLS BIT(11) +#define VI6_RPF_DSWAP_A_LWS BIT(10) +#define VI6_RPF_DSWAP_A_WDS BIT(9) +#define VI6_RPF_DSWAP_A_BTS BIT(8) +#define VI6_RPF_DSWAP_P_LLS BIT(3) +#define VI6_RPF_DSWAP_P_LWS BIT(2) +#define VI6_RPF_DSWAP_P_WDS BIT(1) +#define VI6_RPF_DSWAP_P_BTS BIT(0) + +#define VI6_RPF_LOC 0x0310 +#define VI6_RPF_LOC_HCOORD_MASK (0x1fff << 16) +#define VI6_RPF_LOC_HCOORD_SHIFT 16 +#define VI6_RPF_LOC_VCOORD_MASK (0x1fff << 0) +#define VI6_RPF_LOC_VCOORD_SHIFT 0 + +#define VI6_RPF_ALPH_SEL 0x0314 +#define VI6_RPF_ALPH_SEL_ASEL_PACKED (0 << 28) +#define VI6_RPF_ALPH_SEL_ASEL_8B_PLANE (1 << 28) +#define VI6_RPF_ALPH_SEL_ASEL_SELECT (2 << 28) +#define VI6_RPF_ALPH_SEL_ASEL_1B_PLANE (3 << 28) +#define VI6_RPF_ALPH_SEL_ASEL_FIXED (4 << 28) +#define VI6_RPF_ALPH_SEL_ASEL_MASK (7 << 28) +#define VI6_RPF_ALPH_SEL_ASEL_SHIFT 28 +#define VI6_RPF_ALPH_SEL_IROP_MASK (0xf << 24) +#define VI6_RPF_ALPH_SEL_IROP_SHIFT 24 +#define VI6_RPF_ALPH_SEL_BSEL BIT(23) +#define VI6_RPF_ALPH_SEL_AEXT_ZERO (0 << 18) +#define VI6_RPF_ALPH_SEL_AEXT_EXT (1 << 18) +#define VI6_RPF_ALPH_SEL_AEXT_ONE (2 << 18) +#define VI6_RPF_ALPH_SEL_AEXT_MASK (3 << 18) +#define VI6_RPF_ALPH_SEL_ALPHA1_MASK (0xff << 8) +#define VI6_RPF_ALPH_SEL_ALPHA1_SHIFT 8 +#define VI6_RPF_ALPH_SEL_ALPHA0_MASK (0xff << 0) +#define VI6_RPF_ALPH_SEL_ALPHA0_SHIFT 0 + +#define VI6_RPF_VRTCOL_SET 0x0318 +#define VI6_RPF_VRTCOL_SET_LAYA_MASK (0xff << 24) +#define VI6_RPF_VRTCOL_SET_LAYA_SHIFT 24 +#define VI6_RPF_VRTCOL_SET_LAYR_MASK (0xff << 16) +#define VI6_RPF_VRTCOL_SET_LAYR_SHIFT 16 +#define VI6_RPF_VRTCOL_SET_LAYG_MASK (0xff << 8) +#define VI6_RPF_VRTCOL_SET_LAYG_SHIFT 8 +#define VI6_RPF_VRTCOL_SET_LAYB_MASK (0xff << 0) +#define VI6_RPF_VRTCOL_SET_LAYB_SHIFT 0 + +#define VI6_RPF_MSK_CTRL 0x031c +#define VI6_RPF_MSK_CTRL_MSK_EN BIT(24) +#define VI6_RPF_MSK_CTRL_MGR_MASK (0xff << 16) +#define VI6_RPF_MSK_CTRL_MGR_SHIFT 16 +#define VI6_RPF_MSK_CTRL_MGG_MASK (0xff << 8) +#define VI6_RPF_MSK_CTRL_MGG_SHIFT 8 +#define VI6_RPF_MSK_CTRL_MGB_MASK (0xff << 0) +#define VI6_RPF_MSK_CTRL_MGB_SHIFT 0 + +#define VI6_RPF_MSK_SET0 0x0320 +#define VI6_RPF_MSK_SET1 0x0324 +#define VI6_RPF_MSK_SET_MSA_MASK (0xff << 24) +#define VI6_RPF_MSK_SET_MSA_SHIFT 24 +#define VI6_RPF_MSK_SET_MSR_MASK (0xff << 16) +#define VI6_RPF_MSK_SET_MSR_SHIFT 16 +#define VI6_RPF_MSK_SET_MSG_MASK (0xff << 8) +#define VI6_RPF_MSK_SET_MSG_SHIFT 8 +#define VI6_RPF_MSK_SET_MSB_MASK (0xff << 0) +#define VI6_RPF_MSK_SET_MSB_SHIFT 0 + +#define VI6_RPF_CKEY_CTRL 0x0328 +#define VI6_RPF_CKEY_CTRL_CV BIT(4) +#define VI6_RPF_CKEY_CTRL_SAPE1 BIT(1) +#define VI6_RPF_CKEY_CTRL_SAPE0 BIT(0) + +#define VI6_RPF_CKEY_SET0 0x032c +#define VI6_RPF_CKEY_SET1 0x0330 +#define VI6_RPF_CKEY_SET_AP_MASK (0xff << 24) +#define VI6_RPF_CKEY_SET_AP_SHIFT 24 +#define VI6_RPF_CKEY_SET_R_MASK (0xff << 16) +#define VI6_RPF_CKEY_SET_R_SHIFT 16 +#define VI6_RPF_CKEY_SET_GY_MASK (0xff << 8) +#define VI6_RPF_CKEY_SET_GY_SHIFT 8 +#define VI6_RPF_CKEY_SET_B_MASK (0xff << 0) +#define VI6_RPF_CKEY_SET_B_SHIFT 0 + +#define VI6_RPF_SRCM_PSTRIDE 0x0334 +#define VI6_RPF_SRCM_PSTRIDE_Y_SHIFT 16 +#define VI6_RPF_SRCM_PSTRIDE_C_SHIFT 0 + +#define VI6_RPF_SRCM_ASTRIDE 0x0338 +#define VI6_RPF_SRCM_PSTRIDE_A_SHIFT 0 + +#define VI6_RPF_SRCM_ADDR_Y 0x033c +#define VI6_RPF_SRCM_ADDR_C0 0x0340 +#define VI6_RPF_SRCM_ADDR_C1 0x0344 +#define VI6_RPF_SRCM_ADDR_AI 0x0348 + +#define VI6_RPF_MULT_ALPHA 0x036c +#define VI6_RPF_MULT_ALPHA_A_MMD_NONE (0 << 12) +#define VI6_RPF_MULT_ALPHA_A_MMD_RATIO (1 << 12) +#define VI6_RPF_MULT_ALPHA_P_MMD_NONE (0 << 8) +#define VI6_RPF_MULT_ALPHA_P_MMD_RATIO (1 << 8) +#define VI6_RPF_MULT_ALPHA_P_MMD_IMAGE (2 << 8) +#define VI6_RPF_MULT_ALPHA_P_MMD_BOTH (3 << 8) +#define VI6_RPF_MULT_ALPHA_RATIO_MASK (0xff << 0) +#define VI6_RPF_MULT_ALPHA_RATIO_SHIFT 0 + +/* ----------------------------------------------------------------------------- + * WPF Control Registers + */ + +#define VI6_WPF_OFFSET 0x100 + +#define VI6_WPF_SRCRPF 0x1000 +#define VI6_WPF_SRCRPF_VIRACT_DIS (0 << 28) +#define VI6_WPF_SRCRPF_VIRACT_SUB (1 << 28) +#define VI6_WPF_SRCRPF_VIRACT_MST (2 << 28) +#define VI6_WPF_SRCRPF_VIRACT_MASK (3 << 28) +#define VI6_WPF_SRCRPF_VIRACT2_DIS (0 << 24) +#define VI6_WPF_SRCRPF_VIRACT2_SUB (1 << 24) +#define VI6_WPF_SRCRPF_VIRACT2_MST (2 << 24) +#define VI6_WPF_SRCRPF_VIRACT2_MASK (3 << 24) +#define VI6_WPF_SRCRPF_RPF_ACT_DIS(n) (0 << ((n) * 2)) +#define VI6_WPF_SRCRPF_RPF_ACT_SUB(n) (1 << ((n) * 2)) +#define VI6_WPF_SRCRPF_RPF_ACT_MST(n) (2 << ((n) * 2)) +#define VI6_WPF_SRCRPF_RPF_ACT_MASK(n) (3 << ((n) * 2)) + +#define VI6_WPF_HSZCLIP 0x1004 +#define VI6_WPF_VSZCLIP 0x1008 +#define VI6_WPF_SZCLIP_EN BIT(28) +#define VI6_WPF_SZCLIP_OFST_MASK (0xff << 16) +#define VI6_WPF_SZCLIP_OFST_SHIFT 16 +#define VI6_WPF_SZCLIP_SIZE_MASK (0xfff << 0) +#define VI6_WPF_SZCLIP_SIZE_SHIFT 0 + +#define VI6_WPF_OUTFMT 0x100c +#define VI6_WPF_OUTFMT_PDV_MASK (0xff << 24) +#define VI6_WPF_OUTFMT_PDV_SHIFT 24 +#define VI6_WPF_OUTFMT_PXA BIT(23) +#define VI6_WPF_OUTFMT_ROT BIT(18) +#define VI6_WPF_OUTFMT_HFLP BIT(17) +#define VI6_WPF_OUTFMT_FLP BIT(16) +#define VI6_WPF_OUTFMT_SPYCS BIT(15) +#define VI6_WPF_OUTFMT_SPUVS BIT(14) +#define VI6_WPF_OUTFMT_DITH_DIS (0 << 12) +#define VI6_WPF_OUTFMT_DITH_EN (3 << 12) +#define VI6_WPF_OUTFMT_DITH_MASK (3 << 12) +#define VI6_WPF_OUTFMT_WRTM_BT601 (0 << 9) +#define VI6_WPF_OUTFMT_WRTM_BT601_EXT (1 << 9) +#define VI6_WPF_OUTFMT_WRTM_BT709 (2 << 9) +#define VI6_WPF_OUTFMT_WRTM_BT709_EXT (3 << 9) +#define VI6_WPF_OUTFMT_WRTM_MASK (7 << 9) +#define VI6_WPF_OUTFMT_CSC BIT(8) +#define VI6_WPF_OUTFMT_WRFMT_MASK (0x7f << 0) +#define VI6_WPF_OUTFMT_WRFMT_SHIFT 0 + +#define VI6_WPF_DSWAP 0x1010 +#define VI6_WPF_DSWAP_P_LLS BIT(3) +#define VI6_WPF_DSWAP_P_LWS BIT(2) +#define VI6_WPF_DSWAP_P_WDS BIT(1) +#define VI6_WPF_DSWAP_P_BTS BIT(0) + +#define VI6_WPF_RNDCTRL 0x1014 +#define VI6_WPF_RNDCTRL_CBRM BIT(28) +#define VI6_WPF_RNDCTRL_ABRM_TRUNC (0 << 24) +#define VI6_WPF_RNDCTRL_ABRM_ROUND (1 << 24) +#define VI6_WPF_RNDCTRL_ABRM_THRESH (2 << 24) +#define VI6_WPF_RNDCTRL_ABRM_MASK (3 << 24) +#define VI6_WPF_RNDCTRL_ATHRESH_MASK (0xff << 16) +#define VI6_WPF_RNDCTRL_ATHRESH_SHIFT 16 +#define VI6_WPF_RNDCTRL_CLMD_FULL (0 << 12) +#define VI6_WPF_RNDCTRL_CLMD_CLIP (1 << 12) +#define VI6_WPF_RNDCTRL_CLMD_EXT (2 << 12) +#define VI6_WPF_RNDCTRL_CLMD_MASK (3 << 12) + +#define VI6_WPF_ROT_CTRL 0x1018 +#define VI6_WPF_ROT_CTRL_LN16 BIT(17) +#define VI6_WPF_ROT_CTRL_LMEM_WD_MASK (0x1fff << 0) +#define VI6_WPF_ROT_CTRL_LMEM_WD_SHIFT 0 + +#define VI6_WPF_DSTM_STRIDE_Y 0x101c +#define VI6_WPF_DSTM_STRIDE_C 0x1020 +#define VI6_WPF_DSTM_ADDR_Y 0x1024 +#define VI6_WPF_DSTM_ADDR_C0 0x1028 +#define VI6_WPF_DSTM_ADDR_C1 0x102c + +#define VI6_WPF_WRBCK_CTRL(n) (0x1034 + (n) * 0x100) +#define VI6_WPF_WRBCK_CTRL_WBMD BIT(0) + +/* ----------------------------------------------------------------------------- + * UIF Control Registers + */ + +#define VI6_UIF_OFFSET 0x100 + +#define VI6_UIF_DISCOM_DOCMCR 0x1c00 +#define VI6_UIF_DISCOM_DOCMCR_CMPRU BIT(16) +#define VI6_UIF_DISCOM_DOCMCR_CMPR BIT(0) + +#define VI6_UIF_DISCOM_DOCMSTR 0x1c04 +#define VI6_UIF_DISCOM_DOCMSTR_CMPPRE BIT(1) +#define VI6_UIF_DISCOM_DOCMSTR_CMPST BIT(0) + +#define VI6_UIF_DISCOM_DOCMCLSTR 0x1c08 +#define VI6_UIF_DISCOM_DOCMCLSTR_CMPCLPRE BIT(1) +#define VI6_UIF_DISCOM_DOCMCLSTR_CMPCLST BIT(0) + +#define VI6_UIF_DISCOM_DOCMIENR 0x1c0c +#define VI6_UIF_DISCOM_DOCMIENR_CMPPREIEN BIT(1) +#define VI6_UIF_DISCOM_DOCMIENR_CMPIEN BIT(0) + +#define VI6_UIF_DISCOM_DOCMMDR 0x1c10 +#define VI6_UIF_DISCOM_DOCMMDR_INTHRH(n) ((n) << 16) + +#define VI6_UIF_DISCOM_DOCMPMR 0x1c14 +#define VI6_UIF_DISCOM_DOCMPMR_CMPDFF(n) ((n) << 17) +#define VI6_UIF_DISCOM_DOCMPMR_CMPDFA(n) ((n) << 8) +#define VI6_UIF_DISCOM_DOCMPMR_CMPDAUF BIT(7) +#define VI6_UIF_DISCOM_DOCMPMR_SEL(n) ((n) << 0) + +#define VI6_UIF_DISCOM_DOCMECRCR 0x1c18 +#define VI6_UIF_DISCOM_DOCMCCRCR 0x1c1c +#define VI6_UIF_DISCOM_DOCMSPXR 0x1c20 +#define VI6_UIF_DISCOM_DOCMSPYR 0x1c24 +#define VI6_UIF_DISCOM_DOCMSZXR 0x1c28 +#define VI6_UIF_DISCOM_DOCMSZYR 0x1c2c + +/* ----------------------------------------------------------------------------- + * DPR Control Registers + */ + +#define VI6_DPR_RPF_ROUTE(n) (0x2000 + (n) * 4) + +#define VI6_DPR_WPF_FPORCH(n) (0x2014 + (n) * 4) +#define VI6_DPR_WPF_FPORCH_FP_WPFN (5 << 8) + +#define VI6_DPR_SRU_ROUTE 0x2024 +#define VI6_DPR_UDS_ROUTE(n) (0x2028 + (n) * 4) +#define VI6_DPR_LUT_ROUTE 0x203c +#define VI6_DPR_CLU_ROUTE 0x2040 +#define VI6_DPR_HST_ROUTE 0x2044 +#define VI6_DPR_HSI_ROUTE 0x2048 +#define VI6_DPR_BRU_ROUTE 0x204c +#define VI6_DPR_ILV_BRS_ROUTE 0x2050 +#define VI6_DPR_ROUTE_BRSSEL BIT(28) +#define VI6_DPR_ROUTE_FXA_MASK (0xff << 16) +#define VI6_DPR_ROUTE_FXA_SHIFT 16 +#define VI6_DPR_ROUTE_FP_MASK (0x3f << 8) +#define VI6_DPR_ROUTE_FP_SHIFT 8 +#define VI6_DPR_ROUTE_RT_MASK (0x3f << 0) +#define VI6_DPR_ROUTE_RT_SHIFT 0 + +#define VI6_DPR_HGO_SMPPT 0x2054 +#define VI6_DPR_HGT_SMPPT 0x2058 +#define VI6_DPR_SMPPT_TGW_MASK (7 << 8) +#define VI6_DPR_SMPPT_TGW_SHIFT 8 +#define VI6_DPR_SMPPT_PT_MASK (0x3f << 0) +#define VI6_DPR_SMPPT_PT_SHIFT 0 + +#define VI6_DPR_UIF_ROUTE(n) (0x2074 + (n) * 4) + +#define VI6_DPR_NODE_RPF(n) (n) +#define VI6_DPR_NODE_UIF(n) (12 + (n)) +#define VI6_DPR_NODE_SRU 16 +#define VI6_DPR_NODE_UDS(n) (17 + (n)) +#define VI6_DPR_NODE_LUT 22 +#define VI6_DPR_NODE_BRU_IN(n) (((n) <= 3) ? 23 + (n) : 49) +#define VI6_DPR_NODE_BRU_OUT 27 +#define VI6_DPR_NODE_CLU 29 +#define VI6_DPR_NODE_HST 30 +#define VI6_DPR_NODE_HSI 31 +#define VI6_DPR_NODE_BRS_IN(n) (38 + (n)) +#define VI6_DPR_NODE_LIF 55 /* Gen2 only */ +#define VI6_DPR_NODE_WPF(n) (56 + (n)) +#define VI6_DPR_NODE_UNUSED 63 + +/* ----------------------------------------------------------------------------- + * SRU Control Registers + */ + +#define VI6_SRU_CTRL0 0x2200 +#define VI6_SRU_CTRL0_PARAM0_MASK (0x1ff << 16) +#define VI6_SRU_CTRL0_PARAM0_SHIFT 16 +#define VI6_SRU_CTRL0_PARAM1_MASK (0x1f << 8) +#define VI6_SRU_CTRL0_PARAM1_SHIFT 8 +#define VI6_SRU_CTRL0_MODE_UPSCALE (4 << 4) +#define VI6_SRU_CTRL0_PARAM2 BIT(3) +#define VI6_SRU_CTRL0_PARAM3 BIT(2) +#define VI6_SRU_CTRL0_PARAM4 BIT(1) +#define VI6_SRU_CTRL0_EN BIT(0) + +#define VI6_SRU_CTRL1 0x2204 +#define VI6_SRU_CTRL1_PARAM5 0x7ff + +#define VI6_SRU_CTRL2 0x2208 +#define VI6_SRU_CTRL2_PARAM6_SHIFT 16 +#define VI6_SRU_CTRL2_PARAM7_SHIFT 8 +#define VI6_SRU_CTRL2_PARAM8_SHIFT 0 + +/* ----------------------------------------------------------------------------- + * UDS Control Registers + */ + +#define VI6_UDS_OFFSET 0x100 + +#define VI6_UDS_CTRL 0x2300 +#define VI6_UDS_CTRL_AMD BIT(30) +#define VI6_UDS_CTRL_FMD BIT(29) +#define VI6_UDS_CTRL_BLADV BIT(28) +#define VI6_UDS_CTRL_AON BIT(25) +#define VI6_UDS_CTRL_ATHON BIT(24) +#define VI6_UDS_CTRL_BC BIT(20) +#define VI6_UDS_CTRL_NE_A BIT(19) +#define VI6_UDS_CTRL_NE_RCR BIT(18) +#define VI6_UDS_CTRL_NE_GY BIT(17) +#define VI6_UDS_CTRL_NE_BCB BIT(16) +#define VI6_UDS_CTRL_AMDSLH BIT(2) +#define VI6_UDS_CTRL_TDIPC BIT(1) + +#define VI6_UDS_SCALE 0x2304 +#define VI6_UDS_SCALE_HMANT_MASK (0xf << 28) +#define VI6_UDS_SCALE_HMANT_SHIFT 28 +#define VI6_UDS_SCALE_HFRAC_MASK (0xfff << 16) +#define VI6_UDS_SCALE_HFRAC_SHIFT 16 +#define VI6_UDS_SCALE_VMANT_MASK (0xf << 12) +#define VI6_UDS_SCALE_VMANT_SHIFT 12 +#define VI6_UDS_SCALE_VFRAC_MASK (0xfff << 0) +#define VI6_UDS_SCALE_VFRAC_SHIFT 0 + +#define VI6_UDS_ALPTH 0x2308 +#define VI6_UDS_ALPTH_TH1_MASK (0xff << 8) +#define VI6_UDS_ALPTH_TH1_SHIFT 8 +#define VI6_UDS_ALPTH_TH0_MASK (0xff << 0) +#define VI6_UDS_ALPTH_TH0_SHIFT 0 + +#define VI6_UDS_ALPVAL 0x230c +#define VI6_UDS_ALPVAL_VAL2_MASK (0xff << 16) +#define VI6_UDS_ALPVAL_VAL2_SHIFT 16 +#define VI6_UDS_ALPVAL_VAL1_MASK (0xff << 8) +#define VI6_UDS_ALPVAL_VAL1_SHIFT 8 +#define VI6_UDS_ALPVAL_VAL0_MASK (0xff << 0) +#define VI6_UDS_ALPVAL_VAL0_SHIFT 0 + +#define VI6_UDS_PASS_BWIDTH 0x2310 +#define VI6_UDS_PASS_BWIDTH_H_MASK (0x7f << 16) +#define VI6_UDS_PASS_BWIDTH_H_SHIFT 16 +#define VI6_UDS_PASS_BWIDTH_V_MASK (0x7f << 0) +#define VI6_UDS_PASS_BWIDTH_V_SHIFT 0 + +#define VI6_UDS_HPHASE 0x2314 +#define VI6_UDS_HPHASE_HSTP_MASK (0xfff << 16) +#define VI6_UDS_HPHASE_HSTP_SHIFT 16 +#define VI6_UDS_HPHASE_HEDP_MASK (0xfff << 0) +#define VI6_UDS_HPHASE_HEDP_SHIFT 0 + +#define VI6_UDS_IPC 0x2318 +#define VI6_UDS_IPC_FIELD BIT(27) +#define VI6_UDS_IPC_VEDP_MASK (0xfff << 0) +#define VI6_UDS_IPC_VEDP_SHIFT 0 + +#define VI6_UDS_HSZCLIP 0x231c +#define VI6_UDS_HSZCLIP_HCEN BIT(28) +#define VI6_UDS_HSZCLIP_HCL_OFST_MASK (0xff << 16) +#define VI6_UDS_HSZCLIP_HCL_OFST_SHIFT 16 +#define VI6_UDS_HSZCLIP_HCL_SIZE_MASK (0x1fff << 0) +#define VI6_UDS_HSZCLIP_HCL_SIZE_SHIFT 0 + +#define VI6_UDS_CLIP_SIZE 0x2324 +#define VI6_UDS_CLIP_SIZE_HSIZE_MASK (0x1fff << 16) +#define VI6_UDS_CLIP_SIZE_HSIZE_SHIFT 16 +#define VI6_UDS_CLIP_SIZE_VSIZE_MASK (0x1fff << 0) +#define VI6_UDS_CLIP_SIZE_VSIZE_SHIFT 0 + +#define VI6_UDS_FILL_COLOR 0x2328 +#define VI6_UDS_FILL_COLOR_RFILC_MASK (0xff << 16) +#define VI6_UDS_FILL_COLOR_RFILC_SHIFT 16 +#define VI6_UDS_FILL_COLOR_GFILC_MASK (0xff << 8) +#define VI6_UDS_FILL_COLOR_GFILC_SHIFT 8 +#define VI6_UDS_FILL_COLOR_BFILC_MASK (0xff << 0) +#define VI6_UDS_FILL_COLOR_BFILC_SHIFT 0 + +/* ----------------------------------------------------------------------------- + * LUT Control Registers + */ + +#define VI6_LUT_CTRL 0x2800 +#define VI6_LUT_CTRL_EN BIT(0) + +/* ----------------------------------------------------------------------------- + * CLU Control Registers + */ + +#define VI6_CLU_CTRL 0x2900 +#define VI6_CLU_CTRL_AAI BIT(28) +#define VI6_CLU_CTRL_MVS BIT(24) +#define VI6_CLU_CTRL_AX1I_2D (3 << 14) +#define VI6_CLU_CTRL_AX2I_2D (1 << 12) +#define VI6_CLU_CTRL_OS0_2D (3 << 8) +#define VI6_CLU_CTRL_OS1_2D (1 << 6) +#define VI6_CLU_CTRL_OS2_2D (3 << 4) +#define VI6_CLU_CTRL_M2D BIT(1) +#define VI6_CLU_CTRL_EN BIT(0) + +/* ----------------------------------------------------------------------------- + * HST Control Registers + */ + +#define VI6_HST_CTRL 0x2a00 +#define VI6_HST_CTRL_EN BIT(0) + +/* ----------------------------------------------------------------------------- + * HSI Control Registers + */ + +#define VI6_HSI_CTRL 0x2b00 +#define VI6_HSI_CTRL_EN BIT(0) + +/* ----------------------------------------------------------------------------- + * BRS and BRU Control Registers + */ + +#define VI6_ROP_NOP 0 +#define VI6_ROP_AND 1 +#define VI6_ROP_AND_REV 2 +#define VI6_ROP_COPY 3 +#define VI6_ROP_AND_INV 4 +#define VI6_ROP_CLEAR 5 +#define VI6_ROP_XOR 6 +#define VI6_ROP_OR 7 +#define VI6_ROP_NOR 8 +#define VI6_ROP_EQUIV 9 +#define VI6_ROP_INVERT 10 +#define VI6_ROP_OR_REV 11 +#define VI6_ROP_COPY_INV 12 +#define VI6_ROP_OR_INV 13 +#define VI6_ROP_NAND 14 +#define VI6_ROP_SET 15 + +#define VI6_BRU_BASE 0x2c00 +#define VI6_BRS_BASE 0x3900 + +#define VI6_BRU_INCTRL 0x0000 +#define VI6_BRU_INCTRL_NRM BIT(28) +#define VI6_BRU_INCTRL_DnON (1 << (16 + (n))) +#define VI6_BRU_INCTRL_DITHn_OFF (0 << ((n) * 4)) +#define VI6_BRU_INCTRL_DITHn_18BPP (1 << ((n) * 4)) +#define VI6_BRU_INCTRL_DITHn_16BPP (2 << ((n) * 4)) +#define VI6_BRU_INCTRL_DITHn_15BPP (3 << ((n) * 4)) +#define VI6_BRU_INCTRL_DITHn_12BPP (4 << ((n) * 4)) +#define VI6_BRU_INCTRL_DITHn_8BPP (5 << ((n) * 4)) +#define VI6_BRU_INCTRL_DITHn_MASK (7 << ((n) * 4)) +#define VI6_BRU_INCTRL_DITHn_SHIFT ((n) * 4) + +#define VI6_BRU_VIRRPF_SIZE 0x0004 +#define VI6_BRU_VIRRPF_SIZE_HSIZE_MASK (0x1fff << 16) +#define VI6_BRU_VIRRPF_SIZE_HSIZE_SHIFT 16 +#define VI6_BRU_VIRRPF_SIZE_VSIZE_MASK (0x1fff << 0) +#define VI6_BRU_VIRRPF_SIZE_VSIZE_SHIFT 0 + +#define VI6_BRU_VIRRPF_LOC 0x0008 +#define VI6_BRU_VIRRPF_LOC_HCOORD_MASK (0x1fff << 16) +#define VI6_BRU_VIRRPF_LOC_HCOORD_SHIFT 16 +#define VI6_BRU_VIRRPF_LOC_VCOORD_MASK (0x1fff << 0) +#define VI6_BRU_VIRRPF_LOC_VCOORD_SHIFT 0 + +#define VI6_BRU_VIRRPF_COL 0x000c +#define VI6_BRU_VIRRPF_COL_A_MASK (0xff << 24) +#define VI6_BRU_VIRRPF_COL_A_SHIFT 24 +#define VI6_BRU_VIRRPF_COL_RCR_MASK (0xff << 16) +#define VI6_BRU_VIRRPF_COL_RCR_SHIFT 16 +#define VI6_BRU_VIRRPF_COL_GY_MASK (0xff << 8) +#define VI6_BRU_VIRRPF_COL_GY_SHIFT 8 +#define VI6_BRU_VIRRPF_COL_BCB_MASK (0xff << 0) +#define VI6_BRU_VIRRPF_COL_BCB_SHIFT 0 + +#define VI6_BRU_CTRL(n) (0x0010 + (n) * 8 + ((n) <= 3 ? 0 : 4)) +#define VI6_BRU_CTRL_RBC BIT(31) +#define VI6_BRU_CTRL_DSTSEL_BRUIN(n) (((n) <= 3 ? (n) : (n)+1) << 20) +#define VI6_BRU_CTRL_DSTSEL_VRPF (4 << 20) +#define VI6_BRU_CTRL_DSTSEL_MASK (7 << 20) +#define VI6_BRU_CTRL_SRCSEL_BRUIN(n) (((n) <= 3 ? (n) : (n)+1) << 16) +#define VI6_BRU_CTRL_SRCSEL_VRPF (4 << 16) +#define VI6_BRU_CTRL_SRCSEL_MASK (7 << 16) +#define VI6_BRU_CTRL_CROP(rop) ((rop) << 4) +#define VI6_BRU_CTRL_CROP_MASK (0xf << 4) +#define VI6_BRU_CTRL_AROP(rop) ((rop) << 0) +#define VI6_BRU_CTRL_AROP_MASK (0xf << 0) + +#define VI6_BRU_BLD(n) (0x0014 + (n) * 8 + ((n) <= 3 ? 0 : 4)) +#define VI6_BRU_BLD_CBES BIT(31) +#define VI6_BRU_BLD_CCMDX_DST_A (0 << 28) +#define VI6_BRU_BLD_CCMDX_255_DST_A (1 << 28) +#define VI6_BRU_BLD_CCMDX_SRC_A (2 << 28) +#define VI6_BRU_BLD_CCMDX_255_SRC_A (3 << 28) +#define VI6_BRU_BLD_CCMDX_COEFX (4 << 28) +#define VI6_BRU_BLD_CCMDX_MASK (7 << 28) +#define VI6_BRU_BLD_CCMDY_DST_A (0 << 24) +#define VI6_BRU_BLD_CCMDY_255_DST_A (1 << 24) +#define VI6_BRU_BLD_CCMDY_SRC_A (2 << 24) +#define VI6_BRU_BLD_CCMDY_255_SRC_A (3 << 24) +#define VI6_BRU_BLD_CCMDY_COEFY (4 << 24) +#define VI6_BRU_BLD_CCMDY_MASK (7 << 24) +#define VI6_BRU_BLD_CCMDY_SHIFT 24 +#define VI6_BRU_BLD_ABES BIT(23) +#define VI6_BRU_BLD_ACMDX_DST_A (0 << 20) +#define VI6_BRU_BLD_ACMDX_255_DST_A (1 << 20) +#define VI6_BRU_BLD_ACMDX_SRC_A (2 << 20) +#define VI6_BRU_BLD_ACMDX_255_SRC_A (3 << 20) +#define VI6_BRU_BLD_ACMDX_COEFX (4 << 20) +#define VI6_BRU_BLD_ACMDX_MASK (7 << 20) +#define VI6_BRU_BLD_ACMDY_DST_A (0 << 16) +#define VI6_BRU_BLD_ACMDY_255_DST_A (1 << 16) +#define VI6_BRU_BLD_ACMDY_SRC_A (2 << 16) +#define VI6_BRU_BLD_ACMDY_255_SRC_A (3 << 16) +#define VI6_BRU_BLD_ACMDY_COEFY (4 << 16) +#define VI6_BRU_BLD_ACMDY_MASK (7 << 16) +#define VI6_BRU_BLD_COEFX_MASK (0xff << 8) +#define VI6_BRU_BLD_COEFX_SHIFT 8 +#define VI6_BRU_BLD_COEFY_MASK (0xff << 0) +#define VI6_BRU_BLD_COEFY_SHIFT 0 + +#define VI6_BRU_ROP 0x0030 /* Only available on BRU */ +#define VI6_BRU_ROP_DSTSEL_BRUIN(n) (((n) <= 3 ? (n) : (n)+1) << 20) +#define VI6_BRU_ROP_DSTSEL_VRPF (4 << 20) +#define VI6_BRU_ROP_DSTSEL_MASK (7 << 20) +#define VI6_BRU_ROP_CROP(rop) ((rop) << 4) +#define VI6_BRU_ROP_CROP_MASK (0xf << 4) +#define VI6_BRU_ROP_AROP(rop) ((rop) << 0) +#define VI6_BRU_ROP_AROP_MASK (0xf << 0) + +/* ----------------------------------------------------------------------------- + * HGO Control Registers + */ + +#define VI6_HGO_OFFSET 0x3000 +#define VI6_HGO_OFFSET_HOFFSET_SHIFT 16 +#define VI6_HGO_OFFSET_VOFFSET_SHIFT 0 +#define VI6_HGO_SIZE 0x3004 +#define VI6_HGO_SIZE_HSIZE_SHIFT 16 +#define VI6_HGO_SIZE_VSIZE_SHIFT 0 +#define VI6_HGO_MODE 0x3008 +#define VI6_HGO_MODE_STEP BIT(10) +#define VI6_HGO_MODE_MAXRGB BIT(7) +#define VI6_HGO_MODE_OFSB_R BIT(6) +#define VI6_HGO_MODE_OFSB_G BIT(5) +#define VI6_HGO_MODE_OFSB_B BIT(4) +#define VI6_HGO_MODE_HRATIO_SHIFT 2 +#define VI6_HGO_MODE_VRATIO_SHIFT 0 +#define VI6_HGO_LB_TH 0x300c +#define VI6_HGO_LBn_H(n) (0x3010 + (n) * 8) +#define VI6_HGO_LBn_V(n) (0x3014 + (n) * 8) +#define VI6_HGO_R_HISTO(n) (0x3030 + (n) * 4) +#define VI6_HGO_R_MAXMIN 0x3130 +#define VI6_HGO_R_SUM 0x3134 +#define VI6_HGO_R_LB_DET 0x3138 +#define VI6_HGO_G_HISTO(n) (0x3140 + (n) * 4) +#define VI6_HGO_G_MAXMIN 0x3240 +#define VI6_HGO_G_SUM 0x3244 +#define VI6_HGO_G_LB_DET 0x3248 +#define VI6_HGO_B_HISTO(n) (0x3250 + (n) * 4) +#define VI6_HGO_B_MAXMIN 0x3350 +#define VI6_HGO_B_SUM 0x3354 +#define VI6_HGO_B_LB_DET 0x3358 +#define VI6_HGO_EXT_HIST_ADDR 0x335c +#define VI6_HGO_EXT_HIST_DATA 0x3360 +#define VI6_HGO_REGRST 0x33fc +#define VI6_HGO_REGRST_RCLEA BIT(0) + +/* ----------------------------------------------------------------------------- + * HGT Control Registers + */ + +#define VI6_HGT_OFFSET 0x3400 +#define VI6_HGT_OFFSET_HOFFSET_SHIFT 16 +#define VI6_HGT_OFFSET_VOFFSET_SHIFT 0 +#define VI6_HGT_SIZE 0x3404 +#define VI6_HGT_SIZE_HSIZE_SHIFT 16 +#define VI6_HGT_SIZE_VSIZE_SHIFT 0 +#define VI6_HGT_MODE 0x3408 +#define VI6_HGT_MODE_HRATIO_SHIFT 2 +#define VI6_HGT_MODE_VRATIO_SHIFT 0 +#define VI6_HGT_HUE_AREA(n) (0x340c + (n) * 4) +#define VI6_HGT_HUE_AREA_LOWER_SHIFT 16 +#define VI6_HGT_HUE_AREA_UPPER_SHIFT 0 +#define VI6_HGT_LB_TH 0x3424 +#define VI6_HGT_LBn_H(n) (0x3428 + (n) * 8) +#define VI6_HGT_LBn_V(n) (0x342c + (n) * 8) +#define VI6_HGT_HISTO(m, n) (0x3450 + (m) * 128 + (n) * 4) +#define VI6_HGT_MAXMIN 0x3750 +#define VI6_HGT_SUM 0x3754 +#define VI6_HGT_LB_DET 0x3758 +#define VI6_HGT_REGRST 0x37fc +#define VI6_HGT_REGRST_RCLEA BIT(0) + +/* ----------------------------------------------------------------------------- + * LIF Control Registers + */ + +#define VI6_LIF_OFFSET (-0x100) + +#define VI6_LIF_CTRL 0x3b00 +#define VI6_LIF_CTRL_OBTH_MASK (0x7ff << 16) +#define VI6_LIF_CTRL_OBTH_SHIFT 16 +#define VI6_LIF_CTRL_CFMT BIT(4) +#define VI6_LIF_CTRL_REQSEL BIT(1) +#define VI6_LIF_CTRL_LIF_EN BIT(0) + +#define VI6_LIF_CSBTH 0x3b04 +#define VI6_LIF_CSBTH_HBTH_MASK (0x7ff << 16) +#define VI6_LIF_CSBTH_HBTH_SHIFT 16 +#define VI6_LIF_CSBTH_LBTH_MASK (0x7ff << 0) +#define VI6_LIF_CSBTH_LBTH_SHIFT 0 + +#define VI6_LIF_LBA 0x3b0c +#define VI6_LIF_LBA_LBA0 BIT(31) +#define VI6_LIF_LBA_LBA1_MASK (0xfff << 16) +#define VI6_LIF_LBA_LBA1_SHIFT 16 + +/* ----------------------------------------------------------------------------- + * Security Control Registers + */ + +#define VI6_SECURITY_CTRL0 0x3d00 +#define VI6_SECURITY_CTRL1 0x3d04 + +/* ----------------------------------------------------------------------------- + * IP Version Registers + */ + +#define VI6_IP_VERSION 0x3f00 +#define VI6_IP_VERSION_MASK (0xffff << 0) +#define VI6_IP_VERSION_MODEL_MASK (0xff << 8) +#define VI6_IP_VERSION_MODEL_VSPS_H2 (0x09 << 8) +#define VI6_IP_VERSION_MODEL_VSPR_H2 (0x0a << 8) +#define VI6_IP_VERSION_MODEL_VSPD_GEN2 (0x0b << 8) +#define VI6_IP_VERSION_MODEL_VSPS_M2 (0x0c << 8) +#define VI6_IP_VERSION_MODEL_VSPS_V2H (0x12 << 8) +#define VI6_IP_VERSION_MODEL_VSPD_V2H (0x13 << 8) +#define VI6_IP_VERSION_MODEL_VSPI_GEN3 (0x14 << 8) +#define VI6_IP_VERSION_MODEL_VSPBD_GEN3 (0x15 << 8) +#define VI6_IP_VERSION_MODEL_VSPBC_GEN3 (0x16 << 8) +#define VI6_IP_VERSION_MODEL_VSPD_GEN3 (0x17 << 8) +#define VI6_IP_VERSION_MODEL_VSPD_V3 (0x18 << 8) +#define VI6_IP_VERSION_MODEL_VSPDL_GEN3 (0x19 << 8) +#define VI6_IP_VERSION_MODEL_VSPBS_GEN3 (0x1a << 8) +#define VI6_IP_VERSION_MODEL_VSPD_V3U (0x1c << 8) +/* RZ/G2L SoCs have no version register, So use 0x80 as the model version */ +#define VI6_IP_VERSION_MODEL_VSPD_RZG2L (0x80 << 8) + +#define VI6_IP_VERSION_SOC_MASK (0xff << 0) +#define VI6_IP_VERSION_SOC_H2 (0x01 << 0) +#define VI6_IP_VERSION_SOC_V2H (0x01 << 0) +#define VI6_IP_VERSION_SOC_V3M (0x01 << 0) +#define VI6_IP_VERSION_SOC_M2 (0x02 << 0) +#define VI6_IP_VERSION_SOC_M3W (0x02 << 0) +#define VI6_IP_VERSION_SOC_V3H (0x02 << 0) +#define VI6_IP_VERSION_SOC_H3 (0x03 << 0) +#define VI6_IP_VERSION_SOC_D3 (0x04 << 0) +#define VI6_IP_VERSION_SOC_M3N (0x04 << 0) +#define VI6_IP_VERSION_SOC_E3 (0x04 << 0) +#define VI6_IP_VERSION_SOC_V3U (0x05 << 0) +/* RZ/G2L SoCs have no version register, So use 0x80 for SoC Identification */ +#define VI6_IP_VERSION_SOC_RZG2L (0x80 << 0) + +#define VI6_IP_VERSION_VSP_SW (0xfffe << 16) /* SW VSP version */ + +/* ----------------------------------------------------------------------------- + * RPF CLUT Registers + */ + +#define VI6_CLUT_TABLE 0x4000 + +/* ----------------------------------------------------------------------------- + * 1D LUT Registers + */ + +#define VI6_LUT_TABLE 0x7000 + +/* ----------------------------------------------------------------------------- + * 3D LUT Registers + */ + +#define VI6_CLU_ADDR 0x7400 +#define VI6_CLU_DATA 0x7404 + +/* ----------------------------------------------------------------------------- + * Formats + */ + +#define VI6_FMT_RGB_332 0x00 +#define VI6_FMT_XRGB_4444 0x01 +#define VI6_FMT_RGBX_4444 0x02 +#define VI6_FMT_XRGB_1555 0x04 +#define VI6_FMT_RGBX_5551 0x05 +#define VI6_FMT_RGB_565 0x06 +#define VI6_FMT_AXRGB_86666 0x07 +#define VI6_FMT_RGBXA_66668 0x08 +#define VI6_FMT_XRGBA_66668 0x09 +#define VI6_FMT_ARGBX_86666 0x0a +#define VI6_FMT_AXRXGXB_8262626 0x0b +#define VI6_FMT_XRXGXBA_2626268 0x0c +#define VI6_FMT_ARXGXBX_8626262 0x0d +#define VI6_FMT_RXGXBXA_6262628 0x0e +#define VI6_FMT_XRGB_6666 0x0f +#define VI6_FMT_RGBX_6666 0x10 +#define VI6_FMT_XRXGXB_262626 0x11 +#define VI6_FMT_RXGXBX_626262 0x12 +#define VI6_FMT_ARGB_8888 0x13 +#define VI6_FMT_RGBA_8888 0x14 +#define VI6_FMT_RGB_888 0x15 +#define VI6_FMT_XRGXGB_763763 0x16 +#define VI6_FMT_XXRGB_86666 0x17 +#define VI6_FMT_BGR_888 0x18 +#define VI6_FMT_ARGB_4444 0x19 +#define VI6_FMT_RGBA_4444 0x1a +#define VI6_FMT_ARGB_1555 0x1b +#define VI6_FMT_RGBA_5551 0x1c +#define VI6_FMT_ABGR_4444 0x1d +#define VI6_FMT_BGRA_4444 0x1e +#define VI6_FMT_ABGR_1555 0x1f +#define VI6_FMT_BGRA_5551 0x20 +#define VI6_FMT_XBXGXR_262626 0x21 +#define VI6_FMT_ABGR_8888 0x22 +#define VI6_FMT_XXRGB_88565 0x23 + +#define VI6_FMT_Y_UV_444 0x40 +#define VI6_FMT_Y_UV_422 0x41 +#define VI6_FMT_Y_UV_420 0x42 +#define VI6_FMT_YUV_444 0x46 +#define VI6_FMT_YUYV_422 0x47 +#define VI6_FMT_YYUV_422 0x48 +#define VI6_FMT_YUV_420 0x49 +#define VI6_FMT_Y_U_V_444 0x4a +#define VI6_FMT_Y_U_V_422 0x4b +#define VI6_FMT_Y_U_V_420 0x4c + +#endif /* __VSP1_REGS_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_rpf.c b/drivers/media/platform/renesas/vsp1/vsp1_rpf.c new file mode 100644 index 000000000..75083cb23 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_rpf.c @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_rpf.c -- R-Car VSP1 Read Pixel Formatter + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> + +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_pipe.h" +#include "vsp1_rwpf.h" +#include "vsp1_video.h" + +#define RPF_MAX_WIDTH 8190 +#define RPF_MAX_HEIGHT 8190 + +/* Pre extended display list command data structure. */ +struct vsp1_extcmd_auto_fld_body { + u32 top_y0; + u32 bottom_y0; + u32 top_c0; + u32 bottom_c0; + u32 top_c1; + u32 bottom_c1; + u32 reserved0; + u32 reserved1; +} __packed; + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline void vsp1_rpf_write(struct vsp1_rwpf *rpf, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg + rpf->entity.index * VI6_RPF_OFFSET, + data); +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static const struct v4l2_subdev_ops rpf_ops = { + .pad = &vsp1_rwpf_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void rpf_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev); + const struct vsp1_format_info *fmtinfo = rpf->fmtinfo; + const struct v4l2_pix_format_mplane *format = &rpf->format; + const struct v4l2_mbus_framefmt *source_format; + const struct v4l2_mbus_framefmt *sink_format; + unsigned int left = 0; + unsigned int top = 0; + u32 pstride; + u32 infmt; + + /* Stride */ + pstride = format->plane_fmt[0].bytesperline + << VI6_RPF_SRCM_PSTRIDE_Y_SHIFT; + if (format->num_planes > 1) + pstride |= format->plane_fmt[1].bytesperline + << VI6_RPF_SRCM_PSTRIDE_C_SHIFT; + + /* + * pstride has both STRIDE_Y and STRIDE_C, but multiplying the whole + * of pstride by 2 is conveniently OK here as we are multiplying both + * values. + */ + if (pipe->interlaced) + pstride *= 2; + + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_PSTRIDE, pstride); + + /* Format */ + sink_format = vsp1_entity_get_pad_format(&rpf->entity, + rpf->entity.config, + RWPF_PAD_SINK); + source_format = vsp1_entity_get_pad_format(&rpf->entity, + rpf->entity.config, + RWPF_PAD_SOURCE); + + infmt = VI6_RPF_INFMT_CIPM + | (fmtinfo->hwfmt << VI6_RPF_INFMT_RDFMT_SHIFT); + + if (fmtinfo->swap_yc) + infmt |= VI6_RPF_INFMT_SPYCS; + if (fmtinfo->swap_uv) + infmt |= VI6_RPF_INFMT_SPUVS; + + if (sink_format->code != source_format->code) + infmt |= VI6_RPF_INFMT_CSC; + + vsp1_rpf_write(rpf, dlb, VI6_RPF_INFMT, infmt); + vsp1_rpf_write(rpf, dlb, VI6_RPF_DSWAP, fmtinfo->swap); + + /* Output location. */ + if (pipe->brx) { + const struct v4l2_rect *compose; + + compose = vsp1_entity_get_pad_selection(pipe->brx, + pipe->brx->config, + rpf->brx_input, + V4L2_SEL_TGT_COMPOSE); + left = compose->left; + top = compose->top; + } + + if (pipe->interlaced) + top /= 2; + + vsp1_rpf_write(rpf, dlb, VI6_RPF_LOC, + (left << VI6_RPF_LOC_HCOORD_SHIFT) | + (top << VI6_RPF_LOC_VCOORD_SHIFT)); + + /* + * On Gen2 use the alpha channel (extended to 8 bits) when available or + * a fixed alpha value set through the V4L2_CID_ALPHA_COMPONENT control + * otherwise. + * + * The Gen3 RPF has extended alpha capability and can both multiply the + * alpha channel by a fixed global alpha value, and multiply the pixel + * components to convert the input to premultiplied alpha. + * + * As alpha premultiplication is available in the BRx for both Gen2 and + * Gen3 we handle it there and use the Gen3 alpha multiplier for global + * alpha multiplication only. This however prevents conversion to + * premultiplied alpha if no BRx is present in the pipeline. If that use + * case turns out to be useful we will revisit the implementation (for + * Gen3 only). + * + * We enable alpha multiplication on Gen3 using the fixed alpha value + * set through the V4L2_CID_ALPHA_COMPONENT control when the input + * contains an alpha channel. On Gen2 the global alpha is ignored in + * that case. + * + * In all cases, disable color keying. + */ + vsp1_rpf_write(rpf, dlb, VI6_RPF_ALPH_SEL, VI6_RPF_ALPH_SEL_AEXT_EXT | + (fmtinfo->alpha ? VI6_RPF_ALPH_SEL_ASEL_PACKED + : VI6_RPF_ALPH_SEL_ASEL_FIXED)); + + if (entity->vsp1->info->gen == 3) { + u32 mult; + + if (fmtinfo->alpha) { + /* + * When the input contains an alpha channel enable the + * alpha multiplier. If the input is premultiplied we + * need to multiply both the alpha channel and the pixel + * components by the global alpha value to keep them + * premultiplied. Otherwise multiply the alpha channel + * only. + */ + bool premultiplied = format->flags + & V4L2_PIX_FMT_FLAG_PREMUL_ALPHA; + + mult = VI6_RPF_MULT_ALPHA_A_MMD_RATIO + | (premultiplied ? + VI6_RPF_MULT_ALPHA_P_MMD_RATIO : + VI6_RPF_MULT_ALPHA_P_MMD_NONE); + } else { + /* + * When the input doesn't contain an alpha channel the + * global alpha value is applied in the unpacking unit, + * the alpha multiplier isn't needed and must be + * disabled. + */ + mult = VI6_RPF_MULT_ALPHA_A_MMD_NONE + | VI6_RPF_MULT_ALPHA_P_MMD_NONE; + } + + rpf->mult_alpha = mult; + } + + vsp1_rpf_write(rpf, dlb, VI6_RPF_MSK_CTRL, 0); + vsp1_rpf_write(rpf, dlb, VI6_RPF_CKEY_CTRL, 0); + +} + +static void vsp1_rpf_configure_autofld(struct vsp1_rwpf *rpf, + struct vsp1_dl_list *dl) +{ + const struct v4l2_pix_format_mplane *format = &rpf->format; + struct vsp1_dl_ext_cmd *cmd; + struct vsp1_extcmd_auto_fld_body *auto_fld; + u32 offset_y, offset_c; + + cmd = vsp1_dl_get_pre_cmd(dl); + if (WARN_ONCE(!cmd, "Failed to obtain an autofld cmd")) + return; + + /* Re-index our auto_fld to match the current RPF. */ + auto_fld = cmd->data; + auto_fld = &auto_fld[rpf->entity.index]; + + auto_fld->top_y0 = rpf->mem.addr[0]; + auto_fld->top_c0 = rpf->mem.addr[1]; + auto_fld->top_c1 = rpf->mem.addr[2]; + + offset_y = format->plane_fmt[0].bytesperline; + offset_c = format->plane_fmt[1].bytesperline; + + auto_fld->bottom_y0 = rpf->mem.addr[0] + offset_y; + auto_fld->bottom_c0 = rpf->mem.addr[1] + offset_c; + auto_fld->bottom_c1 = rpf->mem.addr[2] + offset_c; + + cmd->flags |= VI6_DL_EXT_AUTOFLD_INT | BIT(16 + rpf->entity.index); +} + +static void rpf_configure_frame(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev); + + vsp1_rpf_write(rpf, dlb, VI6_RPF_VRTCOL_SET, + rpf->alpha << VI6_RPF_VRTCOL_SET_LAYA_SHIFT); + vsp1_rpf_write(rpf, dlb, VI6_RPF_MULT_ALPHA, rpf->mult_alpha | + (rpf->alpha << VI6_RPF_MULT_ALPHA_RATIO_SHIFT)); + + vsp1_pipeline_propagate_alpha(pipe, dlb, rpf->alpha); +} + +static void rpf_configure_partition(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev); + struct vsp1_rwpf_memory mem = rpf->mem; + struct vsp1_device *vsp1 = rpf->entity.vsp1; + const struct vsp1_format_info *fmtinfo = rpf->fmtinfo; + const struct v4l2_pix_format_mplane *format = &rpf->format; + struct v4l2_rect crop; + + /* + * Source size and crop offsets. + * + * The crop offsets correspond to the location of the crop + * rectangle top left corner in the plane buffer. Only two + * offsets are needed, as planes 2 and 3 always have identical + * strides. + */ + crop = *vsp1_rwpf_get_crop(rpf, rpf->entity.config); + + /* + * Partition Algorithm Control + * + * The partition algorithm can split this frame into multiple + * slices. We must scale our partition window based on the pipe + * configuration to match the destination partition window. + * To achieve this, we adjust our crop to provide a 'sub-crop' + * matching the expected partition window. Only 'left' and + * 'width' need to be adjusted. + */ + if (pipe->partitions > 1) { + crop.width = pipe->partition->rpf.width; + crop.left += pipe->partition->rpf.left; + } + + if (pipe->interlaced) { + crop.height = round_down(crop.height / 2, fmtinfo->vsub); + crop.top = round_down(crop.top / 2, fmtinfo->vsub); + } + + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_BSIZE, + (crop.width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) | + (crop.height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT)); + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_ESIZE, + (crop.width << VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT) | + (crop.height << VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT)); + + mem.addr[0] += crop.top * format->plane_fmt[0].bytesperline + + crop.left * fmtinfo->bpp[0] / 8; + + if (format->num_planes > 1) { + unsigned int bpl = format->plane_fmt[1].bytesperline; + unsigned int offset; + + offset = crop.top / fmtinfo->vsub * bpl + + crop.left / fmtinfo->hsub * fmtinfo->bpp[1] / 8; + mem.addr[1] += offset; + mem.addr[2] += offset; + } + + /* + * On Gen3 hardware the SPUVS bit has no effect on 3-planar + * formats. Swap the U and V planes manually in that case. + */ + if (vsp1->info->gen == 3 && format->num_planes == 3 && + fmtinfo->swap_uv) + swap(mem.addr[1], mem.addr[2]); + + /* + * Interlaced pipelines will use the extended pre-cmd to process + * SRCM_ADDR_{Y,C0,C1}. + */ + if (pipe->interlaced) { + vsp1_rpf_configure_autofld(rpf, dl); + } else { + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]); + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]); + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]); + } +} + +static void rpf_partition(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_partition *partition, + unsigned int partition_idx, + struct vsp1_partition_window *window) +{ + partition->rpf = *window; +} + +static const struct vsp1_entity_operations rpf_entity_ops = { + .configure_stream = rpf_configure_stream, + .configure_frame = rpf_configure_frame, + .configure_partition = rpf_configure_partition, + .partition = rpf_partition, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +struct vsp1_rwpf *vsp1_rpf_create(struct vsp1_device *vsp1, unsigned int index) +{ + struct vsp1_rwpf *rpf; + char name[6]; + int ret; + + rpf = devm_kzalloc(vsp1->dev, sizeof(*rpf), GFP_KERNEL); + if (rpf == NULL) + return ERR_PTR(-ENOMEM); + + rpf->max_width = RPF_MAX_WIDTH; + rpf->max_height = RPF_MAX_HEIGHT; + + rpf->entity.ops = &rpf_entity_ops; + rpf->entity.type = VSP1_ENTITY_RPF; + rpf->entity.index = index; + + sprintf(name, "rpf.%u", index); + ret = vsp1_entity_init(vsp1, &rpf->entity, name, 2, &rpf_ops, + MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER); + if (ret < 0) + return ERR_PTR(ret); + + /* Initialize the control handler. */ + ret = vsp1_rwpf_init_ctrls(rpf, 0); + if (ret < 0) { + dev_err(vsp1->dev, "rpf%u: failed to initialize controls\n", + index); + goto error; + } + + v4l2_ctrl_handler_setup(&rpf->ctrls); + + return rpf; + +error: + vsp1_entity_destroy(&rpf->entity); + return ERR_PTR(ret); +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c b/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c new file mode 100644 index 000000000..22a82d218 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_rwpf.c @@ -0,0 +1,287 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_rwpf.c -- R-Car VSP1 Read and Write Pixel Formatters + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_rwpf.h" +#include "vsp1_video.h" + +#define RWPF_MIN_WIDTH 1 +#define RWPF_MIN_HEIGHT 1 + +struct v4l2_rect *vsp1_rwpf_get_crop(struct vsp1_rwpf *rwpf, + struct v4l2_subdev_state *sd_state) +{ + return v4l2_subdev_get_try_crop(&rwpf->entity.subdev, sd_state, + RWPF_PAD_SINK); +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Pad Operations + */ + +static int vsp1_rwpf_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + static const unsigned int codes[] = { + MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AHSV8888_1X32, + MEDIA_BUS_FMT_AYUV8_1X32, + }; + + if (code->index >= ARRAY_SIZE(codes)) + return -EINVAL; + + code->code = codes[code->index]; + + return 0; +} + +static int vsp1_rwpf_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct vsp1_rwpf *rwpf = to_rwpf(subdev); + + return vsp1_subdev_enum_frame_size(subdev, sd_state, fse, + RWPF_MIN_WIDTH, + RWPF_MIN_HEIGHT, rwpf->max_width, + rwpf->max_height); +} + +static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct vsp1_rwpf *rwpf = to_rwpf(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + int ret = 0; + + mutex_lock(&rwpf->entity.lock); + + config = vsp1_entity_get_pad_config(&rwpf->entity, sd_state, + fmt->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + /* Default to YUV if the requested format is not supported. */ + if (fmt->format.code != MEDIA_BUS_FMT_ARGB8888_1X32 && + fmt->format.code != MEDIA_BUS_FMT_AHSV8888_1X32 && + fmt->format.code != MEDIA_BUS_FMT_AYUV8_1X32) + fmt->format.code = MEDIA_BUS_FMT_AYUV8_1X32; + + format = vsp1_entity_get_pad_format(&rwpf->entity, config, fmt->pad); + + if (fmt->pad == RWPF_PAD_SOURCE) { + /* + * The RWPF performs format conversion but can't scale, only the + * format code can be changed on the source pad. + */ + format->code = fmt->format.code; + fmt->format = *format; + goto done; + } + + format->code = fmt->format.code; + format->width = clamp_t(unsigned int, fmt->format.width, + RWPF_MIN_WIDTH, rwpf->max_width); + format->height = clamp_t(unsigned int, fmt->format.height, + RWPF_MIN_HEIGHT, rwpf->max_height); + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_SRGB; + + fmt->format = *format; + + if (rwpf->entity.type == VSP1_ENTITY_RPF) { + struct v4l2_rect *crop; + + /* Update the sink crop rectangle. */ + crop = vsp1_rwpf_get_crop(rwpf, config); + crop->left = 0; + crop->top = 0; + crop->width = fmt->format.width; + crop->height = fmt->format.height; + } + + /* Propagate the format to the source pad. */ + format = vsp1_entity_get_pad_format(&rwpf->entity, config, + RWPF_PAD_SOURCE); + *format = fmt->format; + + if (rwpf->flip.rotate) { + format->width = fmt->format.height; + format->height = fmt->format.width; + } + +done: + mutex_unlock(&rwpf->entity.lock); + return ret; +} + +static int vsp1_rwpf_get_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_rwpf *rwpf = to_rwpf(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + int ret = 0; + + /* + * Cropping is only supported on the RPF and is implemented on the sink + * pad. + */ + if (rwpf->entity.type == VSP1_ENTITY_WPF || sel->pad != RWPF_PAD_SINK) + return -EINVAL; + + mutex_lock(&rwpf->entity.lock); + + config = vsp1_entity_get_pad_config(&rwpf->entity, sd_state, + sel->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + sel->r = *vsp1_rwpf_get_crop(rwpf, config); + break; + + case V4L2_SEL_TGT_CROP_BOUNDS: + format = vsp1_entity_get_pad_format(&rwpf->entity, config, + RWPF_PAD_SINK); + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = format->width; + sel->r.height = format->height; + break; + + default: + ret = -EINVAL; + break; + } + +done: + mutex_unlock(&rwpf->entity.lock); + return ret; +} + +static int vsp1_rwpf_set_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_rwpf *rwpf = to_rwpf(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *crop; + int ret = 0; + + /* + * Cropping is only supported on the RPF and is implemented on the sink + * pad. + */ + if (rwpf->entity.type == VSP1_ENTITY_WPF || sel->pad != RWPF_PAD_SINK) + return -EINVAL; + + if (sel->target != V4L2_SEL_TGT_CROP) + return -EINVAL; + + mutex_lock(&rwpf->entity.lock); + + config = vsp1_entity_get_pad_config(&rwpf->entity, sd_state, + sel->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + /* Make sure the crop rectangle is entirely contained in the image. */ + format = vsp1_entity_get_pad_format(&rwpf->entity, config, + RWPF_PAD_SINK); + + /* + * Restrict the crop rectangle coordinates to multiples of 2 to avoid + * shifting the color plane. + */ + if (format->code == MEDIA_BUS_FMT_AYUV8_1X32) { + sel->r.left = ALIGN(sel->r.left, 2); + sel->r.top = ALIGN(sel->r.top, 2); + sel->r.width = round_down(sel->r.width, 2); + sel->r.height = round_down(sel->r.height, 2); + } + + sel->r.left = min_t(unsigned int, sel->r.left, format->width - 2); + sel->r.top = min_t(unsigned int, sel->r.top, format->height - 2); + sel->r.width = min_t(unsigned int, sel->r.width, + format->width - sel->r.left); + sel->r.height = min_t(unsigned int, sel->r.height, + format->height - sel->r.top); + + crop = vsp1_rwpf_get_crop(rwpf, config); + *crop = sel->r; + + /* Propagate the format to the source pad. */ + format = vsp1_entity_get_pad_format(&rwpf->entity, config, + RWPF_PAD_SOURCE); + format->width = crop->width; + format->height = crop->height; + +done: + mutex_unlock(&rwpf->entity.lock); + return ret; +} + +const struct v4l2_subdev_pad_ops vsp1_rwpf_pad_ops = { + .init_cfg = vsp1_entity_init_cfg, + .enum_mbus_code = vsp1_rwpf_enum_mbus_code, + .enum_frame_size = vsp1_rwpf_enum_frame_size, + .get_fmt = vsp1_subdev_get_pad_format, + .set_fmt = vsp1_rwpf_set_format, + .get_selection = vsp1_rwpf_get_selection, + .set_selection = vsp1_rwpf_set_selection, +}; + +/* ----------------------------------------------------------------------------- + * Controls + */ + +static int vsp1_rwpf_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct vsp1_rwpf *rwpf = + container_of(ctrl->handler, struct vsp1_rwpf, ctrls); + + switch (ctrl->id) { + case V4L2_CID_ALPHA_COMPONENT: + rwpf->alpha = ctrl->val; + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops vsp1_rwpf_ctrl_ops = { + .s_ctrl = vsp1_rwpf_s_ctrl, +}; + +int vsp1_rwpf_init_ctrls(struct vsp1_rwpf *rwpf, unsigned int ncontrols) +{ + v4l2_ctrl_handler_init(&rwpf->ctrls, ncontrols + 1); + v4l2_ctrl_new_std(&rwpf->ctrls, &vsp1_rwpf_ctrl_ops, + V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 255); + + rwpf->entity.subdev.ctrl_handler = &rwpf->ctrls; + + return rwpf->ctrls.error; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_rwpf.h b/drivers/media/platform/renesas/vsp1/vsp1_rwpf.h new file mode 100644 index 000000000..eac5c04c2 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_rwpf.h @@ -0,0 +1,89 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_rwpf.h -- R-Car VSP1 Read and Write Pixel Formatters + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_RWPF_H__ +#define __VSP1_RWPF_H__ + +#include <linux/spinlock.h> + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_entity.h" + +#define RWPF_PAD_SINK 0 +#define RWPF_PAD_SOURCE 1 + +struct v4l2_ctrl; +struct vsp1_dl_manager; +struct vsp1_rwpf; +struct vsp1_video; + +struct vsp1_rwpf_memory { + dma_addr_t addr[3]; +}; + +struct vsp1_rwpf { + struct vsp1_entity entity; + struct v4l2_ctrl_handler ctrls; + + struct vsp1_video *video; + + unsigned int max_width; + unsigned int max_height; + + struct v4l2_pix_format_mplane format; + const struct vsp1_format_info *fmtinfo; + unsigned int brx_input; + + unsigned int alpha; + + u32 mult_alpha; + u32 outfmt; + + struct { + spinlock_t lock; + struct { + struct v4l2_ctrl *vflip; + struct v4l2_ctrl *hflip; + struct v4l2_ctrl *rotate; + } ctrls; + unsigned int pending; + unsigned int active; + bool rotate; + } flip; + + struct vsp1_rwpf_memory mem; + bool writeback; + + struct vsp1_dl_manager *dlm; +}; + +static inline struct vsp1_rwpf *to_rwpf(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_rwpf, entity.subdev); +} + +static inline struct vsp1_rwpf *entity_to_rwpf(struct vsp1_entity *entity) +{ + return container_of(entity, struct vsp1_rwpf, entity); +} + +struct vsp1_rwpf *vsp1_rpf_create(struct vsp1_device *vsp1, unsigned int index); +struct vsp1_rwpf *vsp1_wpf_create(struct vsp1_device *vsp1, unsigned int index); + +int vsp1_rwpf_init_ctrls(struct vsp1_rwpf *rwpf, unsigned int ncontrols); + +extern const struct v4l2_subdev_pad_ops vsp1_rwpf_pad_ops; + +struct v4l2_rect *vsp1_rwpf_get_crop(struct vsp1_rwpf *rwpf, + struct v4l2_subdev_state *sd_state); + +#endif /* __VSP1_RWPF_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_sru.c b/drivers/media/platform/renesas/vsp1/vsp1_sru.c new file mode 100644 index 000000000..b614a2aea --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_sru.c @@ -0,0 +1,396 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_sru.c -- R-Car VSP1 Super Resolution Unit + * + * Copyright (C) 2013 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_pipe.h" +#include "vsp1_sru.h" + +#define SRU_MIN_SIZE 4U +#define SRU_MAX_SIZE 8190U + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline void vsp1_sru_write(struct vsp1_sru *sru, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg, data); +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +#define V4L2_CID_VSP1_SRU_INTENSITY (V4L2_CID_USER_BASE | 0x1001) + +struct vsp1_sru_param { + u32 ctrl0; + u32 ctrl2; +}; + +#define VI6_SRU_CTRL0_PARAMS(p0, p1) \ + (((p0) << VI6_SRU_CTRL0_PARAM0_SHIFT) | \ + ((p1) << VI6_SRU_CTRL0_PARAM1_SHIFT)) + +#define VI6_SRU_CTRL2_PARAMS(p6, p7, p8) \ + (((p6) << VI6_SRU_CTRL2_PARAM6_SHIFT) | \ + ((p7) << VI6_SRU_CTRL2_PARAM7_SHIFT) | \ + ((p8) << VI6_SRU_CTRL2_PARAM8_SHIFT)) + +static const struct vsp1_sru_param vsp1_sru_params[] = { + { + .ctrl0 = VI6_SRU_CTRL0_PARAMS(256, 4) | VI6_SRU_CTRL0_EN, + .ctrl2 = VI6_SRU_CTRL2_PARAMS(24, 40, 255), + }, { + .ctrl0 = VI6_SRU_CTRL0_PARAMS(256, 4) | VI6_SRU_CTRL0_EN, + .ctrl2 = VI6_SRU_CTRL2_PARAMS(8, 16, 255), + }, { + .ctrl0 = VI6_SRU_CTRL0_PARAMS(384, 5) | VI6_SRU_CTRL0_EN, + .ctrl2 = VI6_SRU_CTRL2_PARAMS(36, 60, 255), + }, { + .ctrl0 = VI6_SRU_CTRL0_PARAMS(384, 5) | VI6_SRU_CTRL0_EN, + .ctrl2 = VI6_SRU_CTRL2_PARAMS(12, 27, 255), + }, { + .ctrl0 = VI6_SRU_CTRL0_PARAMS(511, 6) | VI6_SRU_CTRL0_EN, + .ctrl2 = VI6_SRU_CTRL2_PARAMS(48, 80, 255), + }, { + .ctrl0 = VI6_SRU_CTRL0_PARAMS(511, 6) | VI6_SRU_CTRL0_EN, + .ctrl2 = VI6_SRU_CTRL2_PARAMS(16, 36, 255), + }, +}; + +static int sru_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct vsp1_sru *sru = + container_of(ctrl->handler, struct vsp1_sru, ctrls); + + switch (ctrl->id) { + case V4L2_CID_VSP1_SRU_INTENSITY: + sru->intensity = ctrl->val; + break; + } + + return 0; +} + +static const struct v4l2_ctrl_ops sru_ctrl_ops = { + .s_ctrl = sru_s_ctrl, +}; + +static const struct v4l2_ctrl_config sru_intensity_control = { + .ops = &sru_ctrl_ops, + .id = V4L2_CID_VSP1_SRU_INTENSITY, + .name = "Intensity", + .type = V4L2_CTRL_TYPE_INTEGER, + .min = 1, + .max = 6, + .def = 1, + .step = 1, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static int sru_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + static const unsigned int codes[] = { + MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AYUV8_1X32, + }; + + return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, codes, + ARRAY_SIZE(codes)); +} + +static int sru_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct vsp1_sru *sru = to_sru(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + int ret = 0; + + config = vsp1_entity_get_pad_config(&sru->entity, sd_state, + fse->which); + if (!config) + return -EINVAL; + + format = vsp1_entity_get_pad_format(&sru->entity, config, SRU_PAD_SINK); + + mutex_lock(&sru->entity.lock); + + if (fse->index || fse->code != format->code) { + ret = -EINVAL; + goto done; + } + + if (fse->pad == SRU_PAD_SINK) { + fse->min_width = SRU_MIN_SIZE; + fse->max_width = SRU_MAX_SIZE; + fse->min_height = SRU_MIN_SIZE; + fse->max_height = SRU_MAX_SIZE; + } else { + fse->min_width = format->width; + fse->min_height = format->height; + if (format->width <= SRU_MAX_SIZE / 2 && + format->height <= SRU_MAX_SIZE / 2) { + fse->max_width = format->width * 2; + fse->max_height = format->height * 2; + } else { + fse->max_width = format->width; + fse->max_height = format->height; + } + } + +done: + mutex_unlock(&sru->entity.lock); + return ret; +} + +static void sru_try_format(struct vsp1_sru *sru, + struct v4l2_subdev_state *sd_state, + unsigned int pad, struct v4l2_mbus_framefmt *fmt) +{ + struct v4l2_mbus_framefmt *format; + unsigned int input_area; + unsigned int output_area; + + switch (pad) { + case SRU_PAD_SINK: + /* Default to YUV if the requested format is not supported. */ + if (fmt->code != MEDIA_BUS_FMT_ARGB8888_1X32 && + fmt->code != MEDIA_BUS_FMT_AYUV8_1X32) + fmt->code = MEDIA_BUS_FMT_AYUV8_1X32; + + fmt->width = clamp(fmt->width, SRU_MIN_SIZE, SRU_MAX_SIZE); + fmt->height = clamp(fmt->height, SRU_MIN_SIZE, SRU_MAX_SIZE); + break; + + case SRU_PAD_SOURCE: + /* The SRU can't perform format conversion. */ + format = vsp1_entity_get_pad_format(&sru->entity, sd_state, + SRU_PAD_SINK); + fmt->code = format->code; + + /* + * We can upscale by 2 in both direction, but not independently. + * Compare the input and output rectangles areas (avoiding + * integer overflows on the output): if the requested output + * area is larger than 1.5^2 the input area upscale by two, + * otherwise don't scale. + */ + input_area = format->width * format->height; + output_area = min(fmt->width, SRU_MAX_SIZE) + * min(fmt->height, SRU_MAX_SIZE); + + if (fmt->width <= SRU_MAX_SIZE / 2 && + fmt->height <= SRU_MAX_SIZE / 2 && + output_area > input_area * 9 / 4) { + fmt->width = format->width * 2; + fmt->height = format->height * 2; + } else { + fmt->width = format->width; + fmt->height = format->height; + } + break; + } + + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_SRGB; +} + +static int sru_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct vsp1_sru *sru = to_sru(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + int ret = 0; + + mutex_lock(&sru->entity.lock); + + config = vsp1_entity_get_pad_config(&sru->entity, sd_state, + fmt->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + sru_try_format(sru, config, fmt->pad, &fmt->format); + + format = vsp1_entity_get_pad_format(&sru->entity, config, fmt->pad); + *format = fmt->format; + + if (fmt->pad == SRU_PAD_SINK) { + /* Propagate the format to the source pad. */ + format = vsp1_entity_get_pad_format(&sru->entity, config, + SRU_PAD_SOURCE); + *format = fmt->format; + + sru_try_format(sru, config, SRU_PAD_SOURCE, format); + } + +done: + mutex_unlock(&sru->entity.lock); + return ret; +} + +static const struct v4l2_subdev_pad_ops sru_pad_ops = { + .init_cfg = vsp1_entity_init_cfg, + .enum_mbus_code = sru_enum_mbus_code, + .enum_frame_size = sru_enum_frame_size, + .get_fmt = vsp1_subdev_get_pad_format, + .set_fmt = sru_set_format, +}; + +static const struct v4l2_subdev_ops sru_ops = { + .pad = &sru_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void sru_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + const struct vsp1_sru_param *param; + struct vsp1_sru *sru = to_sru(&entity->subdev); + struct v4l2_mbus_framefmt *input; + struct v4l2_mbus_framefmt *output; + u32 ctrl0; + + input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config, + SRU_PAD_SINK); + output = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config, + SRU_PAD_SOURCE); + + if (input->code == MEDIA_BUS_FMT_ARGB8888_1X32) + ctrl0 = VI6_SRU_CTRL0_PARAM2 | VI6_SRU_CTRL0_PARAM3 + | VI6_SRU_CTRL0_PARAM4; + else + ctrl0 = VI6_SRU_CTRL0_PARAM3; + + if (input->width != output->width) + ctrl0 |= VI6_SRU_CTRL0_MODE_UPSCALE; + + param = &vsp1_sru_params[sru->intensity - 1]; + + ctrl0 |= param->ctrl0; + + vsp1_sru_write(sru, dlb, VI6_SRU_CTRL0, ctrl0); + vsp1_sru_write(sru, dlb, VI6_SRU_CTRL1, VI6_SRU_CTRL1_PARAM5); + vsp1_sru_write(sru, dlb, VI6_SRU_CTRL2, param->ctrl2); +} + +static unsigned int sru_max_width(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe) +{ + struct vsp1_sru *sru = to_sru(&entity->subdev); + struct v4l2_mbus_framefmt *input; + struct v4l2_mbus_framefmt *output; + + input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config, + SRU_PAD_SINK); + output = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config, + SRU_PAD_SOURCE); + + /* + * The maximum input width of the SRU is 288 input pixels, but 32 + * pixels are reserved to support overlapping partition windows when + * scaling. + */ + if (input->width != output->width) + return 512; + else + return 256; +} + +static void sru_partition(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_partition *partition, + unsigned int partition_idx, + struct vsp1_partition_window *window) +{ + struct vsp1_sru *sru = to_sru(&entity->subdev); + struct v4l2_mbus_framefmt *input; + struct v4l2_mbus_framefmt *output; + + input = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config, + SRU_PAD_SINK); + output = vsp1_entity_get_pad_format(&sru->entity, sru->entity.config, + SRU_PAD_SOURCE); + + /* Adapt if SRUx2 is enabled. */ + if (input->width != output->width) { + window->width /= 2; + window->left /= 2; + } + + partition->sru = *window; +} + +static const struct vsp1_entity_operations sru_entity_ops = { + .configure_stream = sru_configure_stream, + .max_width = sru_max_width, + .partition = sru_partition, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +struct vsp1_sru *vsp1_sru_create(struct vsp1_device *vsp1) +{ + struct vsp1_sru *sru; + int ret; + + sru = devm_kzalloc(vsp1->dev, sizeof(*sru), GFP_KERNEL); + if (sru == NULL) + return ERR_PTR(-ENOMEM); + + sru->entity.ops = &sru_entity_ops; + sru->entity.type = VSP1_ENTITY_SRU; + + ret = vsp1_entity_init(vsp1, &sru->entity, "sru", 2, &sru_ops, + MEDIA_ENT_F_PROC_VIDEO_SCALER); + if (ret < 0) + return ERR_PTR(ret); + + /* Initialize the control handler. */ + v4l2_ctrl_handler_init(&sru->ctrls, 1); + v4l2_ctrl_new_custom(&sru->ctrls, &sru_intensity_control, NULL); + + sru->intensity = 1; + + sru->entity.subdev.ctrl_handler = &sru->ctrls; + + if (sru->ctrls.error) { + dev_err(vsp1->dev, "sru: failed to initialize controls\n"); + ret = sru->ctrls.error; + vsp1_entity_destroy(&sru->entity); + return ERR_PTR(ret); + } + + return sru; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_sru.h b/drivers/media/platform/renesas/vsp1/vsp1_sru.h new file mode 100644 index 000000000..ddb00eadd --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_sru.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_sru.h -- R-Car VSP1 Super Resolution Unit + * + * Copyright (C) 2013 Renesas Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_SRU_H__ +#define __VSP1_SRU_H__ + +#include <media/media-entity.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_entity.h" + +struct vsp1_device; + +#define SRU_PAD_SINK 0 +#define SRU_PAD_SOURCE 1 + +struct vsp1_sru { + struct vsp1_entity entity; + + struct v4l2_ctrl_handler ctrls; + + unsigned int intensity; +}; + +static inline struct vsp1_sru *to_sru(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_sru, entity.subdev); +} + +struct vsp1_sru *vsp1_sru_create(struct vsp1_device *vsp1); + +#endif /* __VSP1_SRU_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_uds.c b/drivers/media/platform/renesas/vsp1/vsp1_uds.c new file mode 100644 index 000000000..1c290cda0 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_uds.c @@ -0,0 +1,429 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_uds.c -- R-Car VSP1 Up and Down Scaler + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/gfp.h> + +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_pipe.h" +#include "vsp1_uds.h" + +#define UDS_MIN_SIZE 4U +#define UDS_MAX_SIZE 8190U + +#define UDS_MIN_FACTOR 0x0100 +#define UDS_MAX_FACTOR 0xffff + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline void vsp1_uds_write(struct vsp1_uds *uds, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg + uds->entity.index * VI6_UDS_OFFSET, data); +} + +/* ----------------------------------------------------------------------------- + * Scaling Computation + */ + +void vsp1_uds_set_alpha(struct vsp1_entity *entity, struct vsp1_dl_body *dlb, + unsigned int alpha) +{ + struct vsp1_uds *uds = to_uds(&entity->subdev); + + vsp1_uds_write(uds, dlb, VI6_UDS_ALPVAL, + alpha << VI6_UDS_ALPVAL_VAL0_SHIFT); +} + +/* + * uds_output_size - Return the output size for an input size and scaling ratio + * @input: input size in pixels + * @ratio: scaling ratio in U4.12 fixed-point format + */ +static unsigned int uds_output_size(unsigned int input, unsigned int ratio) +{ + if (ratio > 4096) { + /* Down-scaling */ + unsigned int mp; + + mp = ratio / 4096; + mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4); + + return (input - 1) / mp * mp * 4096 / ratio + 1; + } else { + /* Up-scaling */ + return (input - 1) * 4096 / ratio + 1; + } +} + +/* + * uds_output_limits - Return the min and max output sizes for an input size + * @input: input size in pixels + * @minimum: minimum output size (returned) + * @maximum: maximum output size (returned) + */ +static void uds_output_limits(unsigned int input, + unsigned int *minimum, unsigned int *maximum) +{ + *minimum = max(uds_output_size(input, UDS_MAX_FACTOR), UDS_MIN_SIZE); + *maximum = min(uds_output_size(input, UDS_MIN_FACTOR), UDS_MAX_SIZE); +} + +/* + * uds_passband_width - Return the passband filter width for a scaling ratio + * @ratio: scaling ratio in U4.12 fixed-point format + */ +static unsigned int uds_passband_width(unsigned int ratio) +{ + if (ratio >= 4096) { + /* Down-scaling */ + unsigned int mp; + + mp = ratio / 4096; + mp = mp < 4 ? 1 : (mp < 8 ? 2 : 4); + + return 64 * 4096 * mp / ratio; + } else { + /* Up-scaling */ + return 64; + } +} + +static unsigned int uds_compute_ratio(unsigned int input, unsigned int output) +{ + /* TODO: This is an approximation that will need to be refined. */ + return (input - 1) * 4096 / (output - 1); +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Pad Operations + */ + +static int uds_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + static const unsigned int codes[] = { + MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AYUV8_1X32, + }; + + return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, codes, + ARRAY_SIZE(codes)); +} + +static int uds_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct vsp1_uds *uds = to_uds(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + int ret = 0; + + config = vsp1_entity_get_pad_config(&uds->entity, sd_state, + fse->which); + if (!config) + return -EINVAL; + + format = vsp1_entity_get_pad_format(&uds->entity, config, + UDS_PAD_SINK); + + mutex_lock(&uds->entity.lock); + + if (fse->index || fse->code != format->code) { + ret = -EINVAL; + goto done; + } + + if (fse->pad == UDS_PAD_SINK) { + fse->min_width = UDS_MIN_SIZE; + fse->max_width = UDS_MAX_SIZE; + fse->min_height = UDS_MIN_SIZE; + fse->max_height = UDS_MAX_SIZE; + } else { + uds_output_limits(format->width, &fse->min_width, + &fse->max_width); + uds_output_limits(format->height, &fse->min_height, + &fse->max_height); + } + +done: + mutex_unlock(&uds->entity.lock); + return ret; +} + +static void uds_try_format(struct vsp1_uds *uds, + struct v4l2_subdev_state *sd_state, + unsigned int pad, struct v4l2_mbus_framefmt *fmt) +{ + struct v4l2_mbus_framefmt *format; + unsigned int minimum; + unsigned int maximum; + + switch (pad) { + case UDS_PAD_SINK: + /* Default to YUV if the requested format is not supported. */ + if (fmt->code != MEDIA_BUS_FMT_ARGB8888_1X32 && + fmt->code != MEDIA_BUS_FMT_AYUV8_1X32) + fmt->code = MEDIA_BUS_FMT_AYUV8_1X32; + + fmt->width = clamp(fmt->width, UDS_MIN_SIZE, UDS_MAX_SIZE); + fmt->height = clamp(fmt->height, UDS_MIN_SIZE, UDS_MAX_SIZE); + break; + + case UDS_PAD_SOURCE: + /* The UDS scales but can't perform format conversion. */ + format = vsp1_entity_get_pad_format(&uds->entity, sd_state, + UDS_PAD_SINK); + fmt->code = format->code; + + uds_output_limits(format->width, &minimum, &maximum); + fmt->width = clamp(fmt->width, minimum, maximum); + uds_output_limits(format->height, &minimum, &maximum); + fmt->height = clamp(fmt->height, minimum, maximum); + break; + } + + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_SRGB; +} + +static int uds_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct vsp1_uds *uds = to_uds(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + int ret = 0; + + mutex_lock(&uds->entity.lock); + + config = vsp1_entity_get_pad_config(&uds->entity, sd_state, + fmt->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + uds_try_format(uds, config, fmt->pad, &fmt->format); + + format = vsp1_entity_get_pad_format(&uds->entity, config, fmt->pad); + *format = fmt->format; + + if (fmt->pad == UDS_PAD_SINK) { + /* Propagate the format to the source pad. */ + format = vsp1_entity_get_pad_format(&uds->entity, config, + UDS_PAD_SOURCE); + *format = fmt->format; + + uds_try_format(uds, config, UDS_PAD_SOURCE, format); + } + +done: + mutex_unlock(&uds->entity.lock); + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static const struct v4l2_subdev_pad_ops uds_pad_ops = { + .init_cfg = vsp1_entity_init_cfg, + .enum_mbus_code = uds_enum_mbus_code, + .enum_frame_size = uds_enum_frame_size, + .get_fmt = vsp1_subdev_get_pad_format, + .set_fmt = uds_set_format, +}; + +static const struct v4l2_subdev_ops uds_ops = { + .pad = &uds_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void uds_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_uds *uds = to_uds(&entity->subdev); + const struct v4l2_mbus_framefmt *output; + const struct v4l2_mbus_framefmt *input; + unsigned int hscale; + unsigned int vscale; + bool multitap; + + input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, + UDS_PAD_SINK); + output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, + UDS_PAD_SOURCE); + + hscale = uds_compute_ratio(input->width, output->width); + vscale = uds_compute_ratio(input->height, output->height); + + dev_dbg(uds->entity.vsp1->dev, "hscale %u vscale %u\n", hscale, vscale); + + /* + * Multi-tap scaling can't be enabled along with alpha scaling when + * scaling down with a factor lower than or equal to 1/2 in either + * direction. + */ + if (uds->scale_alpha && (hscale >= 8192 || vscale >= 8192)) + multitap = false; + else + multitap = true; + + vsp1_uds_write(uds, dlb, VI6_UDS_CTRL, + (uds->scale_alpha ? VI6_UDS_CTRL_AON : 0) | + (multitap ? VI6_UDS_CTRL_BC : 0)); + + vsp1_uds_write(uds, dlb, VI6_UDS_PASS_BWIDTH, + (uds_passband_width(hscale) + << VI6_UDS_PASS_BWIDTH_H_SHIFT) | + (uds_passband_width(vscale) + << VI6_UDS_PASS_BWIDTH_V_SHIFT)); + + /* Set the scaling ratios. */ + vsp1_uds_write(uds, dlb, VI6_UDS_SCALE, + (hscale << VI6_UDS_SCALE_HFRAC_SHIFT) | + (vscale << VI6_UDS_SCALE_VFRAC_SHIFT)); +} + +static void uds_configure_partition(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_uds *uds = to_uds(&entity->subdev); + struct vsp1_partition *partition = pipe->partition; + const struct v4l2_mbus_framefmt *output; + + output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, + UDS_PAD_SOURCE); + + /* Input size clipping. */ + vsp1_uds_write(uds, dlb, VI6_UDS_HSZCLIP, VI6_UDS_HSZCLIP_HCEN | + (0 << VI6_UDS_HSZCLIP_HCL_OFST_SHIFT) | + (partition->uds_sink.width + << VI6_UDS_HSZCLIP_HCL_SIZE_SHIFT)); + + /* Output size clipping. */ + vsp1_uds_write(uds, dlb, VI6_UDS_CLIP_SIZE, + (partition->uds_source.width + << VI6_UDS_CLIP_SIZE_HSIZE_SHIFT) | + (output->height + << VI6_UDS_CLIP_SIZE_VSIZE_SHIFT)); +} + +static unsigned int uds_max_width(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe) +{ + struct vsp1_uds *uds = to_uds(&entity->subdev); + const struct v4l2_mbus_framefmt *output; + const struct v4l2_mbus_framefmt *input; + unsigned int hscale; + + input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, + UDS_PAD_SINK); + output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, + UDS_PAD_SOURCE); + hscale = output->width / input->width; + + /* + * The maximum width of the UDS is 304 pixels. These are input pixels + * in the event of up-scaling, and output pixels in the event of + * downscaling. + * + * To support overlapping partition windows we clamp at units of 256 and + * the remaining pixels are reserved. + */ + if (hscale <= 2) + return 256; + else if (hscale <= 4) + return 512; + else if (hscale <= 8) + return 1024; + else + return 2048; +} + +/* ----------------------------------------------------------------------------- + * Partition Algorithm Support + */ + +static void uds_partition(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_partition *partition, + unsigned int partition_idx, + struct vsp1_partition_window *window) +{ + struct vsp1_uds *uds = to_uds(&entity->subdev); + const struct v4l2_mbus_framefmt *output; + const struct v4l2_mbus_framefmt *input; + + /* Initialise the partition state. */ + partition->uds_sink = *window; + partition->uds_source = *window; + + input = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, + UDS_PAD_SINK); + output = vsp1_entity_get_pad_format(&uds->entity, uds->entity.config, + UDS_PAD_SOURCE); + + partition->uds_sink.width = window->width * input->width + / output->width; + partition->uds_sink.left = window->left * input->width + / output->width; + + *window = partition->uds_sink; +} + +static const struct vsp1_entity_operations uds_entity_ops = { + .configure_stream = uds_configure_stream, + .configure_partition = uds_configure_partition, + .max_width = uds_max_width, + .partition = uds_partition, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +struct vsp1_uds *vsp1_uds_create(struct vsp1_device *vsp1, unsigned int index) +{ + struct vsp1_uds *uds; + char name[6]; + int ret; + + uds = devm_kzalloc(vsp1->dev, sizeof(*uds), GFP_KERNEL); + if (uds == NULL) + return ERR_PTR(-ENOMEM); + + uds->entity.ops = &uds_entity_ops; + uds->entity.type = VSP1_ENTITY_UDS; + uds->entity.index = index; + + sprintf(name, "uds.%u", index); + ret = vsp1_entity_init(vsp1, &uds->entity, name, 2, &uds_ops, + MEDIA_ENT_F_PROC_VIDEO_SCALER); + if (ret < 0) + return ERR_PTR(ret); + + return uds; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_uds.h b/drivers/media/platform/renesas/vsp1/vsp1_uds.h new file mode 100644 index 000000000..c34f95a66 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_uds.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_uds.h -- R-Car VSP1 Up and Down Scaler + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_UDS_H__ +#define __VSP1_UDS_H__ + +#include <media/media-entity.h> +#include <media/v4l2-subdev.h> + +#include "vsp1_entity.h" + +struct vsp1_device; + +#define UDS_PAD_SINK 0 +#define UDS_PAD_SOURCE 1 + +struct vsp1_uds { + struct vsp1_entity entity; + bool scale_alpha; +}; + +static inline struct vsp1_uds *to_uds(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_uds, entity.subdev); +} + +struct vsp1_uds *vsp1_uds_create(struct vsp1_device *vsp1, unsigned int index); + +void vsp1_uds_set_alpha(struct vsp1_entity *uds, struct vsp1_dl_body *dlb, + unsigned int alpha); + +#endif /* __VSP1_UDS_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_uif.c b/drivers/media/platform/renesas/vsp1/vsp1_uif.c new file mode 100644 index 000000000..83d7f17df --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_uif.c @@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_uif.c -- R-Car VSP1 User Logic Interface + * + * Copyright (C) 2017-2018 Laurent Pinchart + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> +#include <linux/gfp.h> +#include <linux/sys_soc.h> + +#include <media/media-entity.h> +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_entity.h" +#include "vsp1_uif.h" + +#define UIF_MIN_SIZE 4U +#define UIF_MAX_SIZE 8190U + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline u32 vsp1_uif_read(struct vsp1_uif *uif, u32 reg) +{ + return vsp1_read(uif->entity.vsp1, + uif->entity.index * VI6_UIF_OFFSET + reg); +} + +static inline void vsp1_uif_write(struct vsp1_uif *uif, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg + uif->entity.index * VI6_UIF_OFFSET, data); +} + +u32 vsp1_uif_get_crc(struct vsp1_uif *uif) +{ + return vsp1_uif_read(uif, VI6_UIF_DISCOM_DOCMCCRCR); +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Pad Operations + */ + +static const unsigned int uif_codes[] = { + MEDIA_BUS_FMT_ARGB8888_1X32, + MEDIA_BUS_FMT_AHSV8888_1X32, + MEDIA_BUS_FMT_AYUV8_1X32, +}; + +static int uif_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, uif_codes, + ARRAY_SIZE(uif_codes)); +} + +static int uif_enum_frame_size(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + return vsp1_subdev_enum_frame_size(subdev, sd_state, fse, + UIF_MIN_SIZE, + UIF_MIN_SIZE, UIF_MAX_SIZE, + UIF_MAX_SIZE); +} + +static int uif_set_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + return vsp1_subdev_set_pad_format(subdev, sd_state, fmt, uif_codes, + ARRAY_SIZE(uif_codes), + UIF_MIN_SIZE, UIF_MIN_SIZE, + UIF_MAX_SIZE, UIF_MAX_SIZE); +} + +static int uif_get_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_uif *uif = to_uif(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + int ret = 0; + + if (sel->pad != UIF_PAD_SINK) + return -EINVAL; + + mutex_lock(&uif->entity.lock); + + config = vsp1_entity_get_pad_config(&uif->entity, sd_state, + sel->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + switch (sel->target) { + case V4L2_SEL_TGT_CROP_BOUNDS: + case V4L2_SEL_TGT_CROP_DEFAULT: + format = vsp1_entity_get_pad_format(&uif->entity, config, + UIF_PAD_SINK); + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = format->width; + sel->r.height = format->height; + break; + + case V4L2_SEL_TGT_CROP: + sel->r = *vsp1_entity_get_pad_selection(&uif->entity, config, + sel->pad, sel->target); + break; + + default: + ret = -EINVAL; + break; + } + +done: + mutex_unlock(&uif->entity.lock); + return ret; +} + +static int uif_set_selection(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vsp1_uif *uif = to_uif(subdev); + struct v4l2_subdev_state *config; + struct v4l2_mbus_framefmt *format; + struct v4l2_rect *selection; + int ret = 0; + + if (sel->pad != UIF_PAD_SINK || + sel->target != V4L2_SEL_TGT_CROP) + return -EINVAL; + + mutex_lock(&uif->entity.lock); + + config = vsp1_entity_get_pad_config(&uif->entity, sd_state, + sel->which); + if (!config) { + ret = -EINVAL; + goto done; + } + + /* The crop rectangle must be inside the input frame. */ + format = vsp1_entity_get_pad_format(&uif->entity, config, UIF_PAD_SINK); + + sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1); + sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1); + sel->r.width = clamp_t(unsigned int, sel->r.width, UIF_MIN_SIZE, + format->width - sel->r.left); + sel->r.height = clamp_t(unsigned int, sel->r.height, UIF_MIN_SIZE, + format->height - sel->r.top); + + /* Store the crop rectangle. */ + selection = vsp1_entity_get_pad_selection(&uif->entity, config, + sel->pad, V4L2_SEL_TGT_CROP); + *selection = sel->r; + +done: + mutex_unlock(&uif->entity.lock); + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static const struct v4l2_subdev_pad_ops uif_pad_ops = { + .init_cfg = vsp1_entity_init_cfg, + .enum_mbus_code = uif_enum_mbus_code, + .enum_frame_size = uif_enum_frame_size, + .get_fmt = vsp1_subdev_get_pad_format, + .set_fmt = uif_set_format, + .get_selection = uif_get_selection, + .set_selection = uif_set_selection, +}; + +static const struct v4l2_subdev_ops uif_ops = { + .pad = &uif_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void uif_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_uif *uif = to_uif(&entity->subdev); + const struct v4l2_rect *crop; + unsigned int left; + unsigned int width; + + vsp1_uif_write(uif, dlb, VI6_UIF_DISCOM_DOCMPMR, + VI6_UIF_DISCOM_DOCMPMR_SEL(9)); + + crop = vsp1_entity_get_pad_selection(entity, entity->config, + UIF_PAD_SINK, V4L2_SEL_TGT_CROP); + + left = crop->left; + width = crop->width; + + /* On M3-W the horizontal coordinates are twice the register value. */ + if (uif->m3w_quirk) { + left /= 2; + width /= 2; + } + + vsp1_uif_write(uif, dlb, VI6_UIF_DISCOM_DOCMSPXR, left); + vsp1_uif_write(uif, dlb, VI6_UIF_DISCOM_DOCMSPYR, crop->top); + vsp1_uif_write(uif, dlb, VI6_UIF_DISCOM_DOCMSZXR, width); + vsp1_uif_write(uif, dlb, VI6_UIF_DISCOM_DOCMSZYR, crop->height); + + vsp1_uif_write(uif, dlb, VI6_UIF_DISCOM_DOCMCR, + VI6_UIF_DISCOM_DOCMCR_CMPR); +} + +static const struct vsp1_entity_operations uif_entity_ops = { + .configure_stream = uif_configure_stream, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +static const struct soc_device_attribute vsp1_r8a7796[] = { + { .soc_id = "r8a7796" }, + { /* sentinel */ } +}; + +struct vsp1_uif *vsp1_uif_create(struct vsp1_device *vsp1, unsigned int index) +{ + struct vsp1_uif *uif; + char name[6]; + int ret; + + uif = devm_kzalloc(vsp1->dev, sizeof(*uif), GFP_KERNEL); + if (!uif) + return ERR_PTR(-ENOMEM); + + if (soc_device_match(vsp1_r8a7796)) + uif->m3w_quirk = true; + + uif->entity.ops = &uif_entity_ops; + uif->entity.type = VSP1_ENTITY_UIF; + uif->entity.index = index; + + /* The datasheet names the two UIF instances UIF4 and UIF5. */ + sprintf(name, "uif.%u", index + 4); + ret = vsp1_entity_init(vsp1, &uif->entity, name, 2, &uif_ops, + MEDIA_ENT_F_PROC_VIDEO_STATISTICS); + if (ret < 0) + return ERR_PTR(ret); + + return uif; +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_uif.h b/drivers/media/platform/renesas/vsp1/vsp1_uif.h new file mode 100644 index 000000000..c71ab5f6a --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_uif.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_uif.h -- R-Car VSP1 User Logic Interface + * + * Copyright (C) 2017-2018 Laurent Pinchart + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_UIF_H__ +#define __VSP1_UIF_H__ + +#include "vsp1_entity.h" + +struct vsp1_device; + +#define UIF_PAD_SINK 0 +#define UIF_PAD_SOURCE 1 + +struct vsp1_uif { + struct vsp1_entity entity; + bool m3w_quirk; +}; + +static inline struct vsp1_uif *to_uif(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct vsp1_uif, entity.subdev); +} + +struct vsp1_uif *vsp1_uif_create(struct vsp1_device *vsp1, unsigned int index); +u32 vsp1_uif_get_crc(struct vsp1_uif *uif); + +#endif /* __VSP1_UIF_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_video.c b/drivers/media/platform/renesas/vsp1/vsp1_video.c new file mode 100644 index 000000000..9d24647c8 --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_video.c @@ -0,0 +1,1326 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_video.c -- R-Car VSP1 Video Node + * + * Copyright (C) 2013-2015 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/list.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/v4l2-mediabus.h> +#include <linux/videodev2.h> +#include <linux/wait.h> + +#include <media/media-entity.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-subdev.h> +#include <media/videobuf2-v4l2.h> +#include <media/videobuf2-dma-contig.h> + +#include "vsp1.h" +#include "vsp1_brx.h" +#include "vsp1_dl.h" +#include "vsp1_entity.h" +#include "vsp1_hgo.h" +#include "vsp1_hgt.h" +#include "vsp1_pipe.h" +#include "vsp1_rwpf.h" +#include "vsp1_uds.h" +#include "vsp1_video.h" + +#define VSP1_VIDEO_DEF_FORMAT V4L2_PIX_FMT_YUYV +#define VSP1_VIDEO_DEF_WIDTH 1024 +#define VSP1_VIDEO_DEF_HEIGHT 768 + +#define VSP1_VIDEO_MAX_WIDTH 8190U +#define VSP1_VIDEO_MAX_HEIGHT 8190U + +/* ----------------------------------------------------------------------------- + * Helper functions + */ + +static struct v4l2_subdev * +vsp1_video_remote_subdev(struct media_pad *local, u32 *pad) +{ + struct media_pad *remote; + + remote = media_pad_remote_pad_first(local); + if (!remote || !is_media_entity_v4l2_subdev(remote->entity)) + return NULL; + + if (pad) + *pad = remote->index; + + return media_entity_to_v4l2_subdev(remote->entity); +} + +static int vsp1_video_verify_format(struct vsp1_video *video) +{ + struct v4l2_subdev_format fmt; + struct v4l2_subdev *subdev; + int ret; + + subdev = vsp1_video_remote_subdev(&video->pad, &fmt.pad); + if (subdev == NULL) + return -EINVAL; + + fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt); + if (ret < 0) + return ret == -ENOIOCTLCMD ? -EINVAL : ret; + + if (video->rwpf->fmtinfo->mbus != fmt.format.code || + video->rwpf->format.height != fmt.format.height || + video->rwpf->format.width != fmt.format.width) + return -EINVAL; + + return 0; +} + +static int __vsp1_video_try_format(struct vsp1_video *video, + struct v4l2_pix_format_mplane *pix, + const struct vsp1_format_info **fmtinfo) +{ + static const u32 xrgb_formats[][2] = { + { V4L2_PIX_FMT_RGB444, V4L2_PIX_FMT_XRGB444 }, + { V4L2_PIX_FMT_RGB555, V4L2_PIX_FMT_XRGB555 }, + { V4L2_PIX_FMT_BGR32, V4L2_PIX_FMT_XBGR32 }, + { V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_XRGB32 }, + }; + + const struct vsp1_format_info *info; + unsigned int width = pix->width; + unsigned int height = pix->height; + unsigned int i; + + /* + * Backward compatibility: replace deprecated RGB formats by their XRGB + * equivalent. This selects the format older userspace applications want + * while still exposing the new format. + */ + for (i = 0; i < ARRAY_SIZE(xrgb_formats); ++i) { + if (xrgb_formats[i][0] == pix->pixelformat) { + pix->pixelformat = xrgb_formats[i][1]; + break; + } + } + + /* + * Retrieve format information and select the default format if the + * requested format isn't supported. + */ + info = vsp1_get_format_info(video->vsp1, pix->pixelformat); + if (info == NULL) + info = vsp1_get_format_info(video->vsp1, VSP1_VIDEO_DEF_FORMAT); + + pix->pixelformat = info->fourcc; + pix->colorspace = V4L2_COLORSPACE_SRGB; + pix->field = V4L2_FIELD_NONE; + + if (info->fourcc == V4L2_PIX_FMT_HSV24 || + info->fourcc == V4L2_PIX_FMT_HSV32) + pix->hsv_enc = V4L2_HSV_ENC_256; + + memset(pix->reserved, 0, sizeof(pix->reserved)); + + /* Align the width and height for YUV 4:2:2 and 4:2:0 formats. */ + width = round_down(width, info->hsub); + height = round_down(height, info->vsub); + + /* Clamp the width and height. */ + pix->width = clamp(width, info->hsub, VSP1_VIDEO_MAX_WIDTH); + pix->height = clamp(height, info->vsub, VSP1_VIDEO_MAX_HEIGHT); + + /* + * Compute and clamp the stride and image size. While not documented in + * the datasheet, strides not aligned to a multiple of 128 bytes result + * in image corruption. + */ + for (i = 0; i < min(info->planes, 2U); ++i) { + unsigned int hsub = i > 0 ? info->hsub : 1; + unsigned int vsub = i > 0 ? info->vsub : 1; + unsigned int align = 128; + unsigned int bpl; + + bpl = clamp_t(unsigned int, pix->plane_fmt[i].bytesperline, + pix->width / hsub * info->bpp[i] / 8, + round_down(65535U, align)); + + pix->plane_fmt[i].bytesperline = round_up(bpl, align); + pix->plane_fmt[i].sizeimage = pix->plane_fmt[i].bytesperline + * pix->height / vsub; + } + + if (info->planes == 3) { + /* The second and third planes must have the same stride. */ + pix->plane_fmt[2].bytesperline = pix->plane_fmt[1].bytesperline; + pix->plane_fmt[2].sizeimage = pix->plane_fmt[1].sizeimage; + } + + pix->num_planes = info->planes; + + if (fmtinfo) + *fmtinfo = info; + + return 0; +} + +/* ----------------------------------------------------------------------------- + * VSP1 Partition Algorithm support + */ + +/** + * vsp1_video_calculate_partition - Calculate the active partition output window + * + * @pipe: the pipeline + * @partition: partition that will hold the calculated values + * @div_size: pre-determined maximum partition division size + * @index: partition index + */ +static void vsp1_video_calculate_partition(struct vsp1_pipeline *pipe, + struct vsp1_partition *partition, + unsigned int div_size, + unsigned int index) +{ + const struct v4l2_mbus_framefmt *format; + struct vsp1_partition_window window; + unsigned int modulus; + + /* + * Partitions are computed on the size before rotation, use the format + * at the WPF sink. + */ + format = vsp1_entity_get_pad_format(&pipe->output->entity, + pipe->output->entity.config, + RWPF_PAD_SINK); + + /* A single partition simply processes the output size in full. */ + if (pipe->partitions <= 1) { + window.left = 0; + window.width = format->width; + + vsp1_pipeline_propagate_partition(pipe, partition, index, + &window); + return; + } + + /* Initialise the partition with sane starting conditions. */ + window.left = index * div_size; + window.width = div_size; + + modulus = format->width % div_size; + + /* + * We need to prevent the last partition from being smaller than the + * *minimum* width of the hardware capabilities. + * + * If the modulus is less than half of the partition size, + * the penultimate partition is reduced to half, which is added + * to the final partition: |1234|1234|1234|12|341| + * to prevent this: |1234|1234|1234|1234|1|. + */ + if (modulus) { + /* + * pipe->partitions is 1 based, whilst index is a 0 based index. + * Normalise this locally. + */ + unsigned int partitions = pipe->partitions - 1; + + if (modulus < div_size / 2) { + if (index == partitions - 1) { + /* Halve the penultimate partition. */ + window.width = div_size / 2; + } else if (index == partitions) { + /* Increase the final partition. */ + window.width = (div_size / 2) + modulus; + window.left -= div_size / 2; + } + } else if (index == partitions) { + window.width = modulus; + } + } + + vsp1_pipeline_propagate_partition(pipe, partition, index, &window); +} + +static int vsp1_video_pipeline_setup_partitions(struct vsp1_pipeline *pipe) +{ + struct vsp1_device *vsp1 = pipe->output->entity.vsp1; + const struct v4l2_mbus_framefmt *format; + struct vsp1_entity *entity; + unsigned int div_size; + unsigned int i; + + /* + * Partitions are computed on the size before rotation, use the format + * at the WPF sink. + */ + format = vsp1_entity_get_pad_format(&pipe->output->entity, + pipe->output->entity.config, + RWPF_PAD_SINK); + div_size = format->width; + + /* + * Only Gen3 hardware requires image partitioning, Gen2 will operate + * with a single partition that covers the whole output. + */ + if (vsp1->info->gen == 3) { + list_for_each_entry(entity, &pipe->entities, list_pipe) { + unsigned int entity_max; + + if (!entity->ops->max_width) + continue; + + entity_max = entity->ops->max_width(entity, pipe); + if (entity_max) + div_size = min(div_size, entity_max); + } + } + + pipe->partitions = DIV_ROUND_UP(format->width, div_size); + pipe->part_table = kcalloc(pipe->partitions, sizeof(*pipe->part_table), + GFP_KERNEL); + if (!pipe->part_table) + return -ENOMEM; + + for (i = 0; i < pipe->partitions; ++i) + vsp1_video_calculate_partition(pipe, &pipe->part_table[i], + div_size, i); + + return 0; +} + +/* ----------------------------------------------------------------------------- + * Pipeline Management + */ + +/* + * vsp1_video_complete_buffer - Complete the current buffer + * @video: the video node + * + * This function completes the current buffer by filling its sequence number, + * time stamp and payload size, and hands it back to the vb2 core. + * + * Return the next queued buffer or NULL if the queue is empty. + */ +static struct vsp1_vb2_buffer * +vsp1_video_complete_buffer(struct vsp1_video *video) +{ + struct vsp1_pipeline *pipe = video->rwpf->entity.pipe; + struct vsp1_vb2_buffer *next = NULL; + struct vsp1_vb2_buffer *done; + unsigned long flags; + unsigned int i; + + spin_lock_irqsave(&video->irqlock, flags); + + if (list_empty(&video->irqqueue)) { + spin_unlock_irqrestore(&video->irqlock, flags); + return NULL; + } + + done = list_first_entry(&video->irqqueue, + struct vsp1_vb2_buffer, queue); + + list_del(&done->queue); + + if (!list_empty(&video->irqqueue)) + next = list_first_entry(&video->irqqueue, + struct vsp1_vb2_buffer, queue); + + spin_unlock_irqrestore(&video->irqlock, flags); + + done->buf.sequence = pipe->sequence; + done->buf.vb2_buf.timestamp = ktime_get_ns(); + for (i = 0; i < done->buf.vb2_buf.num_planes; ++i) + vb2_set_plane_payload(&done->buf.vb2_buf, i, + vb2_plane_size(&done->buf.vb2_buf, i)); + vb2_buffer_done(&done->buf.vb2_buf, VB2_BUF_STATE_DONE); + + return next; +} + +static void vsp1_video_frame_end(struct vsp1_pipeline *pipe, + struct vsp1_rwpf *rwpf) +{ + struct vsp1_video *video = rwpf->video; + struct vsp1_vb2_buffer *buf; + + buf = vsp1_video_complete_buffer(video); + if (buf == NULL) + return; + + video->rwpf->mem = buf->mem; + pipe->buffers_ready |= 1 << video->pipe_index; +} + +static void vsp1_video_pipeline_run_partition(struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + unsigned int partition) +{ + struct vsp1_dl_body *dlb = vsp1_dl_list_get_body0(dl); + struct vsp1_entity *entity; + + pipe->partition = &pipe->part_table[partition]; + + list_for_each_entry(entity, &pipe->entities, list_pipe) + vsp1_entity_configure_partition(entity, pipe, dl, dlb); +} + +static void vsp1_video_pipeline_run(struct vsp1_pipeline *pipe) +{ + struct vsp1_device *vsp1 = pipe->output->entity.vsp1; + struct vsp1_entity *entity; + struct vsp1_dl_body *dlb; + struct vsp1_dl_list *dl; + unsigned int partition; + + dl = vsp1_dl_list_get(pipe->output->dlm); + + /* + * If the VSP hardware isn't configured yet (which occurs either when + * processing the first frame or after a system suspend/resume), add the + * cached stream configuration to the display list to perform a full + * initialisation. + */ + if (!pipe->configured) + vsp1_dl_list_add_body(dl, pipe->stream_config); + + dlb = vsp1_dl_list_get_body0(dl); + + list_for_each_entry(entity, &pipe->entities, list_pipe) + vsp1_entity_configure_frame(entity, pipe, dl, dlb); + + /* Run the first partition. */ + vsp1_video_pipeline_run_partition(pipe, dl, 0); + + /* Process consecutive partitions as necessary. */ + for (partition = 1; partition < pipe->partitions; ++partition) { + struct vsp1_dl_list *dl_next; + + dl_next = vsp1_dl_list_get(pipe->output->dlm); + + /* + * An incomplete chain will still function, but output only + * the partitions that had a dl available. The frame end + * interrupt will be marked on the last dl in the chain. + */ + if (!dl_next) { + dev_err(vsp1->dev, "Failed to obtain a dl list. Frame will be incomplete\n"); + break; + } + + vsp1_video_pipeline_run_partition(pipe, dl_next, partition); + vsp1_dl_list_add_chain(dl, dl_next); + } + + /* Complete, and commit the head display list. */ + vsp1_dl_list_commit(dl, 0); + pipe->configured = true; + + vsp1_pipeline_run(pipe); +} + +static void vsp1_video_pipeline_frame_end(struct vsp1_pipeline *pipe, + unsigned int completion) +{ + struct vsp1_device *vsp1 = pipe->output->entity.vsp1; + enum vsp1_pipeline_state state; + unsigned long flags; + unsigned int i; + + /* M2M Pipelines should never call here with an incomplete frame. */ + WARN_ON_ONCE(!(completion & VSP1_DL_FRAME_END_COMPLETED)); + + spin_lock_irqsave(&pipe->irqlock, flags); + + /* Complete buffers on all video nodes. */ + for (i = 0; i < vsp1->info->rpf_count; ++i) { + if (!pipe->inputs[i]) + continue; + + vsp1_video_frame_end(pipe, pipe->inputs[i]); + } + + vsp1_video_frame_end(pipe, pipe->output); + + state = pipe->state; + pipe->state = VSP1_PIPELINE_STOPPED; + + /* + * If a stop has been requested, mark the pipeline as stopped and + * return. Otherwise restart the pipeline if ready. + */ + if (state == VSP1_PIPELINE_STOPPING) + wake_up(&pipe->wq); + else if (vsp1_pipeline_ready(pipe)) + vsp1_video_pipeline_run(pipe); + + spin_unlock_irqrestore(&pipe->irqlock, flags); +} + +static int vsp1_video_pipeline_build_branch(struct vsp1_pipeline *pipe, + struct vsp1_rwpf *input, + struct vsp1_rwpf *output) +{ + struct media_entity_enum ent_enum; + struct vsp1_entity *entity; + struct media_pad *pad; + struct vsp1_brx *brx = NULL; + int ret; + + ret = media_entity_enum_init(&ent_enum, &input->entity.vsp1->media_dev); + if (ret < 0) + return ret; + + /* + * The main data path doesn't include the HGO or HGT, use + * vsp1_entity_remote_pad() to traverse the graph. + */ + + pad = vsp1_entity_remote_pad(&input->entity.pads[RWPF_PAD_SOURCE]); + + while (1) { + if (pad == NULL) { + ret = -EPIPE; + goto out; + } + + /* We've reached a video node, that shouldn't have happened. */ + if (!is_media_entity_v4l2_subdev(pad->entity)) { + ret = -EPIPE; + goto out; + } + + entity = to_vsp1_entity( + media_entity_to_v4l2_subdev(pad->entity)); + + /* + * A BRU or BRS is present in the pipeline, store its input pad + * number in the input RPF for use when configuring the RPF. + */ + if (entity->type == VSP1_ENTITY_BRU || + entity->type == VSP1_ENTITY_BRS) { + /* BRU and BRS can't be chained. */ + if (brx) { + ret = -EPIPE; + goto out; + } + + brx = to_brx(&entity->subdev); + brx->inputs[pad->index].rpf = input; + input->brx_input = pad->index; + } + + /* We've reached the WPF, we're done. */ + if (entity->type == VSP1_ENTITY_WPF) + break; + + /* Ensure the branch has no loop. */ + if (media_entity_enum_test_and_set(&ent_enum, + &entity->subdev.entity)) { + ret = -EPIPE; + goto out; + } + + /* UDS can't be chained. */ + if (entity->type == VSP1_ENTITY_UDS) { + if (pipe->uds) { + ret = -EPIPE; + goto out; + } + + pipe->uds = entity; + pipe->uds_input = brx ? &brx->entity : &input->entity; + } + + /* Follow the source link, ignoring any HGO or HGT. */ + pad = &entity->pads[entity->source_pad]; + pad = vsp1_entity_remote_pad(pad); + } + + /* The last entity must be the output WPF. */ + if (entity != &output->entity) + ret = -EPIPE; + +out: + media_entity_enum_cleanup(&ent_enum); + + return ret; +} + +static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe, + struct vsp1_video *video) +{ + struct media_graph graph; + struct media_entity *entity = &video->video.entity; + struct media_device *mdev = entity->graph_obj.mdev; + unsigned int i; + int ret; + + /* Walk the graph to locate the entities and video nodes. */ + ret = media_graph_walk_init(&graph, mdev); + if (ret) + return ret; + + media_graph_walk_start(&graph, entity); + + while ((entity = media_graph_walk_next(&graph))) { + struct v4l2_subdev *subdev; + struct vsp1_rwpf *rwpf; + struct vsp1_entity *e; + + if (!is_media_entity_v4l2_subdev(entity)) + continue; + + subdev = media_entity_to_v4l2_subdev(entity); + e = to_vsp1_entity(subdev); + list_add_tail(&e->list_pipe, &pipe->entities); + e->pipe = pipe; + + switch (e->type) { + case VSP1_ENTITY_RPF: + rwpf = to_rwpf(subdev); + pipe->inputs[rwpf->entity.index] = rwpf; + rwpf->video->pipe_index = ++pipe->num_inputs; + break; + + case VSP1_ENTITY_WPF: + rwpf = to_rwpf(subdev); + pipe->output = rwpf; + rwpf->video->pipe_index = 0; + break; + + case VSP1_ENTITY_LIF: + pipe->lif = e; + break; + + case VSP1_ENTITY_BRU: + case VSP1_ENTITY_BRS: + pipe->brx = e; + break; + + case VSP1_ENTITY_HGO: + pipe->hgo = e; + break; + + case VSP1_ENTITY_HGT: + pipe->hgt = e; + break; + + default: + break; + } + } + + media_graph_walk_cleanup(&graph); + + /* We need one output and at least one input. */ + if (pipe->num_inputs == 0 || !pipe->output) + return -EPIPE; + + /* + * Follow links downstream for each input and make sure the graph + * contains no loop and that all branches end at the output WPF. + */ + for (i = 0; i < video->vsp1->info->rpf_count; ++i) { + if (!pipe->inputs[i]) + continue; + + ret = vsp1_video_pipeline_build_branch(pipe, pipe->inputs[i], + pipe->output); + if (ret < 0) + return ret; + } + + return 0; +} + +static int vsp1_video_pipeline_init(struct vsp1_pipeline *pipe, + struct vsp1_video *video) +{ + vsp1_pipeline_init(pipe); + + pipe->frame_end = vsp1_video_pipeline_frame_end; + + return vsp1_video_pipeline_build(pipe, video); +} + +static struct vsp1_pipeline *vsp1_video_pipeline_get(struct vsp1_video *video) +{ + struct vsp1_pipeline *pipe; + int ret; + + /* + * Get a pipeline object for the video node. If a pipeline has already + * been allocated just increment its reference count and return it. + * Otherwise allocate a new pipeline and initialize it, it will be freed + * when the last reference is released. + */ + if (!video->rwpf->entity.pipe) { + pipe = kzalloc(sizeof(*pipe), GFP_KERNEL); + if (!pipe) + return ERR_PTR(-ENOMEM); + + ret = vsp1_video_pipeline_init(pipe, video); + if (ret < 0) { + vsp1_pipeline_reset(pipe); + kfree(pipe); + return ERR_PTR(ret); + } + } else { + pipe = video->rwpf->entity.pipe; + kref_get(&pipe->kref); + } + + return pipe; +} + +static void vsp1_video_pipeline_release(struct kref *kref) +{ + struct vsp1_pipeline *pipe = container_of(kref, typeof(*pipe), kref); + + vsp1_pipeline_reset(pipe); + kfree(pipe); +} + +static void vsp1_video_pipeline_put(struct vsp1_pipeline *pipe) +{ + struct media_device *mdev = &pipe->output->entity.vsp1->media_dev; + + mutex_lock(&mdev->graph_mutex); + kref_put(&pipe->kref, vsp1_video_pipeline_release); + mutex_unlock(&mdev->graph_mutex); +} + +/* ----------------------------------------------------------------------------- + * videobuf2 Queue Operations + */ + +static int +vsp1_video_queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], struct device *alloc_devs[]) +{ + struct vsp1_video *video = vb2_get_drv_priv(vq); + const struct v4l2_pix_format_mplane *format = &video->rwpf->format; + unsigned int i; + + if (*nplanes) { + if (*nplanes != format->num_planes) + return -EINVAL; + + for (i = 0; i < *nplanes; i++) + if (sizes[i] < format->plane_fmt[i].sizeimage) + return -EINVAL; + return 0; + } + + *nplanes = format->num_planes; + + for (i = 0; i < format->num_planes; ++i) + sizes[i] = format->plane_fmt[i].sizeimage; + + return 0; +} + +static int vsp1_video_buffer_prepare(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct vsp1_video *video = vb2_get_drv_priv(vb->vb2_queue); + struct vsp1_vb2_buffer *buf = to_vsp1_vb2_buffer(vbuf); + const struct v4l2_pix_format_mplane *format = &video->rwpf->format; + unsigned int i; + + if (vb->num_planes < format->num_planes) + return -EINVAL; + + for (i = 0; i < vb->num_planes; ++i) { + buf->mem.addr[i] = vb2_dma_contig_plane_dma_addr(vb, i); + + if (vb2_plane_size(vb, i) < format->plane_fmt[i].sizeimage) + return -EINVAL; + } + + for ( ; i < 3; ++i) + buf->mem.addr[i] = 0; + + return 0; +} + +static void vsp1_video_buffer_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct vsp1_video *video = vb2_get_drv_priv(vb->vb2_queue); + struct vsp1_pipeline *pipe = video->rwpf->entity.pipe; + struct vsp1_vb2_buffer *buf = to_vsp1_vb2_buffer(vbuf); + unsigned long flags; + bool empty; + + spin_lock_irqsave(&video->irqlock, flags); + empty = list_empty(&video->irqqueue); + list_add_tail(&buf->queue, &video->irqqueue); + spin_unlock_irqrestore(&video->irqlock, flags); + + if (!empty) + return; + + spin_lock_irqsave(&pipe->irqlock, flags); + + video->rwpf->mem = buf->mem; + pipe->buffers_ready |= 1 << video->pipe_index; + + if (vb2_is_streaming(&video->queue) && + vsp1_pipeline_ready(pipe)) + vsp1_video_pipeline_run(pipe); + + spin_unlock_irqrestore(&pipe->irqlock, flags); +} + +static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe) +{ + struct vsp1_entity *entity; + int ret; + + /* Determine this pipelines sizes for image partitioning support. */ + ret = vsp1_video_pipeline_setup_partitions(pipe); + if (ret < 0) + return ret; + + if (pipe->uds) { + struct vsp1_uds *uds = to_uds(&pipe->uds->subdev); + + /* + * If a BRU or BRS is present in the pipeline before the UDS, + * the alpha component doesn't need to be scaled as the BRU and + * BRS output alpha value is fixed to 255. Otherwise we need to + * scale the alpha component only when available at the input + * RPF. + */ + if (pipe->uds_input->type == VSP1_ENTITY_BRU || + pipe->uds_input->type == VSP1_ENTITY_BRS) { + uds->scale_alpha = false; + } else { + struct vsp1_rwpf *rpf = + to_rwpf(&pipe->uds_input->subdev); + + uds->scale_alpha = rpf->fmtinfo->alpha; + } + } + + /* + * Compute and cache the stream configuration into a body. The cached + * body will be added to the display list by vsp1_video_pipeline_run() + * whenever the pipeline needs to be fully reconfigured. + */ + pipe->stream_config = vsp1_dlm_dl_body_get(pipe->output->dlm); + if (!pipe->stream_config) + return -ENOMEM; + + list_for_each_entry(entity, &pipe->entities, list_pipe) { + vsp1_entity_route_setup(entity, pipe, pipe->stream_config); + vsp1_entity_configure_stream(entity, pipe, NULL, + pipe->stream_config); + } + + return 0; +} + +static void vsp1_video_release_buffers(struct vsp1_video *video) +{ + struct vsp1_vb2_buffer *buffer; + unsigned long flags; + + /* Remove all buffers from the IRQ queue. */ + spin_lock_irqsave(&video->irqlock, flags); + list_for_each_entry(buffer, &video->irqqueue, queue) + vb2_buffer_done(&buffer->buf.vb2_buf, VB2_BUF_STATE_ERROR); + INIT_LIST_HEAD(&video->irqqueue); + spin_unlock_irqrestore(&video->irqlock, flags); +} + +static void vsp1_video_cleanup_pipeline(struct vsp1_pipeline *pipe) +{ + lockdep_assert_held(&pipe->lock); + + /* Release any cached configuration from our output video. */ + vsp1_dl_body_put(pipe->stream_config); + pipe->stream_config = NULL; + pipe->configured = false; + + /* Release our partition table allocation. */ + kfree(pipe->part_table); + pipe->part_table = NULL; +} + +static int vsp1_video_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct vsp1_video *video = vb2_get_drv_priv(vq); + struct vsp1_pipeline *pipe = video->rwpf->entity.pipe; + bool start_pipeline = false; + unsigned long flags; + int ret; + + mutex_lock(&pipe->lock); + if (pipe->stream_count == pipe->num_inputs) { + ret = vsp1_video_setup_pipeline(pipe); + if (ret < 0) { + vsp1_video_release_buffers(video); + vsp1_video_cleanup_pipeline(pipe); + mutex_unlock(&pipe->lock); + return ret; + } + + start_pipeline = true; + } + + pipe->stream_count++; + mutex_unlock(&pipe->lock); + + /* + * vsp1_pipeline_ready() is not sufficient to establish that all streams + * are prepared and the pipeline is configured, as multiple streams + * can race through streamon with buffers already queued; Therefore we + * don't even attempt to start the pipeline until the last stream has + * called through here. + */ + if (!start_pipeline) + return 0; + + spin_lock_irqsave(&pipe->irqlock, flags); + if (vsp1_pipeline_ready(pipe)) + vsp1_video_pipeline_run(pipe); + spin_unlock_irqrestore(&pipe->irqlock, flags); + + return 0; +} + +static void vsp1_video_stop_streaming(struct vb2_queue *vq) +{ + struct vsp1_video *video = vb2_get_drv_priv(vq); + struct vsp1_pipeline *pipe = video->rwpf->entity.pipe; + unsigned long flags; + int ret; + + /* + * Clear the buffers ready flag to make sure the device won't be started + * by a QBUF on the video node on the other side of the pipeline. + */ + spin_lock_irqsave(&video->irqlock, flags); + pipe->buffers_ready &= ~(1 << video->pipe_index); + spin_unlock_irqrestore(&video->irqlock, flags); + + mutex_lock(&pipe->lock); + if (--pipe->stream_count == pipe->num_inputs) { + /* Stop the pipeline. */ + ret = vsp1_pipeline_stop(pipe); + if (ret == -ETIMEDOUT) + dev_err(video->vsp1->dev, "pipeline stop timeout\n"); + + vsp1_video_cleanup_pipeline(pipe); + } + mutex_unlock(&pipe->lock); + + video_device_pipeline_stop(&video->video); + vsp1_video_release_buffers(video); + vsp1_video_pipeline_put(pipe); +} + +static const struct vb2_ops vsp1_video_queue_qops = { + .queue_setup = vsp1_video_queue_setup, + .buf_prepare = vsp1_video_buffer_prepare, + .buf_queue = vsp1_video_buffer_queue, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .start_streaming = vsp1_video_start_streaming, + .stop_streaming = vsp1_video_stop_streaming, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 ioctls + */ + +static int +vsp1_video_querycap(struct file *file, void *fh, struct v4l2_capability *cap) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_video *video = to_vsp1_video(vfh->vdev); + + cap->capabilities = V4L2_CAP_DEVICE_CAPS | V4L2_CAP_STREAMING + | V4L2_CAP_VIDEO_CAPTURE_MPLANE + | V4L2_CAP_VIDEO_OUTPUT_MPLANE; + + + strscpy(cap->driver, "vsp1", sizeof(cap->driver)); + strscpy(cap->card, video->video.name, sizeof(cap->card)); + + return 0; +} + +static int +vsp1_video_get_format(struct file *file, void *fh, struct v4l2_format *format) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_video *video = to_vsp1_video(vfh->vdev); + + if (format->type != video->queue.type) + return -EINVAL; + + mutex_lock(&video->lock); + format->fmt.pix_mp = video->rwpf->format; + mutex_unlock(&video->lock); + + return 0; +} + +static int +vsp1_video_try_format(struct file *file, void *fh, struct v4l2_format *format) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_video *video = to_vsp1_video(vfh->vdev); + + if (format->type != video->queue.type) + return -EINVAL; + + return __vsp1_video_try_format(video, &format->fmt.pix_mp, NULL); +} + +static int +vsp1_video_set_format(struct file *file, void *fh, struct v4l2_format *format) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_video *video = to_vsp1_video(vfh->vdev); + const struct vsp1_format_info *info; + int ret; + + if (format->type != video->queue.type) + return -EINVAL; + + ret = __vsp1_video_try_format(video, &format->fmt.pix_mp, &info); + if (ret < 0) + return ret; + + mutex_lock(&video->lock); + + if (vb2_is_busy(&video->queue)) { + ret = -EBUSY; + goto done; + } + + video->rwpf->format = format->fmt.pix_mp; + video->rwpf->fmtinfo = info; + +done: + mutex_unlock(&video->lock); + return ret; +} + +static int +vsp1_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type) +{ + struct v4l2_fh *vfh = file->private_data; + struct vsp1_video *video = to_vsp1_video(vfh->vdev); + struct media_device *mdev = &video->vsp1->media_dev; + struct vsp1_pipeline *pipe; + int ret; + + if (vb2_queue_is_busy(&video->queue, file)) + return -EBUSY; + + /* + * Get a pipeline for the video node and start streaming on it. No link + * touching an entity in the pipeline can be activated or deactivated + * once streaming is started. + */ + mutex_lock(&mdev->graph_mutex); + + pipe = vsp1_video_pipeline_get(video); + if (IS_ERR(pipe)) { + mutex_unlock(&mdev->graph_mutex); + return PTR_ERR(pipe); + } + + ret = __video_device_pipeline_start(&video->video, &pipe->pipe); + if (ret < 0) { + mutex_unlock(&mdev->graph_mutex); + goto err_pipe; + } + + mutex_unlock(&mdev->graph_mutex); + + /* + * Verify that the configured format matches the output of the connected + * subdev. + */ + ret = vsp1_video_verify_format(video); + if (ret < 0) + goto err_stop; + + /* Start the queue. */ + ret = vb2_streamon(&video->queue, type); + if (ret < 0) + goto err_stop; + + return 0; + +err_stop: + video_device_pipeline_stop(&video->video); +err_pipe: + vsp1_video_pipeline_put(pipe); + return ret; +} + +static const struct v4l2_ioctl_ops vsp1_video_ioctl_ops = { + .vidioc_querycap = vsp1_video_querycap, + .vidioc_g_fmt_vid_cap_mplane = vsp1_video_get_format, + .vidioc_s_fmt_vid_cap_mplane = vsp1_video_set_format, + .vidioc_try_fmt_vid_cap_mplane = vsp1_video_try_format, + .vidioc_g_fmt_vid_out_mplane = vsp1_video_get_format, + .vidioc_s_fmt_vid_out_mplane = vsp1_video_set_format, + .vidioc_try_fmt_vid_out_mplane = vsp1_video_try_format, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vsp1_video_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 File Operations + */ + +static int vsp1_video_open(struct file *file) +{ + struct vsp1_video *video = video_drvdata(file); + struct v4l2_fh *vfh; + int ret = 0; + + vfh = kzalloc(sizeof(*vfh), GFP_KERNEL); + if (vfh == NULL) + return -ENOMEM; + + v4l2_fh_init(vfh, &video->video); + v4l2_fh_add(vfh); + + file->private_data = vfh; + + ret = vsp1_device_get(video->vsp1); + if (ret < 0) { + v4l2_fh_del(vfh); + v4l2_fh_exit(vfh); + kfree(vfh); + } + + return ret; +} + +static int vsp1_video_release(struct file *file) +{ + struct vsp1_video *video = video_drvdata(file); + + vb2_fop_release(file); + + vsp1_device_put(video->vsp1); + + return 0; +} + +static const struct v4l2_file_operations vsp1_video_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = video_ioctl2, + .open = vsp1_video_open, + .release = vsp1_video_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, +}; + +/* ----------------------------------------------------------------------------- + * Suspend and Resume + */ + +void vsp1_video_suspend(struct vsp1_device *vsp1) +{ + unsigned long flags; + unsigned int i; + int ret; + + /* + * To avoid increasing the system suspend time needlessly, loop over the + * pipelines twice, first to set them all to the stopping state, and + * then to wait for the stop to complete. + */ + for (i = 0; i < vsp1->info->wpf_count; ++i) { + struct vsp1_rwpf *wpf = vsp1->wpf[i]; + struct vsp1_pipeline *pipe; + + if (wpf == NULL) + continue; + + pipe = wpf->entity.pipe; + if (pipe == NULL) + continue; + + spin_lock_irqsave(&pipe->irqlock, flags); + if (pipe->state == VSP1_PIPELINE_RUNNING) + pipe->state = VSP1_PIPELINE_STOPPING; + spin_unlock_irqrestore(&pipe->irqlock, flags); + } + + for (i = 0; i < vsp1->info->wpf_count; ++i) { + struct vsp1_rwpf *wpf = vsp1->wpf[i]; + struct vsp1_pipeline *pipe; + + if (wpf == NULL) + continue; + + pipe = wpf->entity.pipe; + if (pipe == NULL) + continue; + + ret = wait_event_timeout(pipe->wq, vsp1_pipeline_stopped(pipe), + msecs_to_jiffies(500)); + if (ret == 0) + dev_warn(vsp1->dev, "pipeline %u stop timeout\n", + wpf->entity.index); + } +} + +void vsp1_video_resume(struct vsp1_device *vsp1) +{ + unsigned long flags; + unsigned int i; + + /* Resume all running pipelines. */ + for (i = 0; i < vsp1->info->wpf_count; ++i) { + struct vsp1_rwpf *wpf = vsp1->wpf[i]; + struct vsp1_pipeline *pipe; + + if (wpf == NULL) + continue; + + pipe = wpf->entity.pipe; + if (pipe == NULL) + continue; + + /* + * The hardware may have been reset during a suspend and will + * need a full reconfiguration. + */ + pipe->configured = false; + + spin_lock_irqsave(&pipe->irqlock, flags); + if (vsp1_pipeline_ready(pipe)) + vsp1_video_pipeline_run(pipe); + spin_unlock_irqrestore(&pipe->irqlock, flags); + } +} + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +struct vsp1_video *vsp1_video_create(struct vsp1_device *vsp1, + struct vsp1_rwpf *rwpf) +{ + struct vsp1_video *video; + const char *direction; + int ret; + + video = devm_kzalloc(vsp1->dev, sizeof(*video), GFP_KERNEL); + if (!video) + return ERR_PTR(-ENOMEM); + + rwpf->video = video; + + video->vsp1 = vsp1; + video->rwpf = rwpf; + + if (rwpf->entity.type == VSP1_ENTITY_RPF) { + direction = "input"; + video->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; + video->pad.flags = MEDIA_PAD_FL_SOURCE; + video->video.vfl_dir = VFL_DIR_TX; + video->video.device_caps = V4L2_CAP_VIDEO_OUTPUT_MPLANE | + V4L2_CAP_STREAMING; + } else { + direction = "output"; + video->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; + video->pad.flags = MEDIA_PAD_FL_SINK; + video->video.vfl_dir = VFL_DIR_RX; + video->video.device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE | + V4L2_CAP_STREAMING; + } + + mutex_init(&video->lock); + spin_lock_init(&video->irqlock); + INIT_LIST_HEAD(&video->irqqueue); + + /* Initialize the media entity... */ + ret = media_entity_pads_init(&video->video.entity, 1, &video->pad); + if (ret < 0) + return ERR_PTR(ret); + + /* ... and the format ... */ + rwpf->format.pixelformat = VSP1_VIDEO_DEF_FORMAT; + rwpf->format.width = VSP1_VIDEO_DEF_WIDTH; + rwpf->format.height = VSP1_VIDEO_DEF_HEIGHT; + __vsp1_video_try_format(video, &rwpf->format, &rwpf->fmtinfo); + + /* ... and the video node... */ + video->video.v4l2_dev = &video->vsp1->v4l2_dev; + video->video.fops = &vsp1_video_fops; + snprintf(video->video.name, sizeof(video->video.name), "%s %s", + rwpf->entity.subdev.name, direction); + video->video.vfl_type = VFL_TYPE_VIDEO; + video->video.release = video_device_release_empty; + video->video.ioctl_ops = &vsp1_video_ioctl_ops; + + video_set_drvdata(&video->video, video); + + video->queue.type = video->type; + video->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; + video->queue.lock = &video->lock; + video->queue.drv_priv = video; + video->queue.buf_struct_size = sizeof(struct vsp1_vb2_buffer); + video->queue.ops = &vsp1_video_queue_qops; + video->queue.mem_ops = &vb2_dma_contig_memops; + video->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; + video->queue.dev = video->vsp1->bus_master; + ret = vb2_queue_init(&video->queue); + if (ret < 0) { + dev_err(video->vsp1->dev, "failed to initialize vb2 queue\n"); + goto error; + } + + /* ... and register the video device. */ + video->video.queue = &video->queue; + ret = video_register_device(&video->video, VFL_TYPE_VIDEO, -1); + if (ret < 0) { + dev_err(video->vsp1->dev, "failed to register video device\n"); + goto error; + } + + return video; + +error: + vsp1_video_cleanup(video); + return ERR_PTR(ret); +} + +void vsp1_video_cleanup(struct vsp1_video *video) +{ + if (video_is_registered(&video->video)) + video_unregister_device(&video->video); + + media_entity_cleanup(&video->video.entity); +} diff --git a/drivers/media/platform/renesas/vsp1/vsp1_video.h b/drivers/media/platform/renesas/vsp1/vsp1_video.h new file mode 100644 index 000000000..f3cf5e2fd --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_video.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1_video.h -- R-Car VSP1 Video Node + * + * Copyright (C) 2013-2015 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __VSP1_VIDEO_H__ +#define __VSP1_VIDEO_H__ + +#include <linux/list.h> +#include <linux/spinlock.h> + +#include <media/videobuf2-v4l2.h> + +#include "vsp1_rwpf.h" + +struct vsp1_vb2_buffer { + struct vb2_v4l2_buffer buf; + struct list_head queue; + struct vsp1_rwpf_memory mem; +}; + +static inline struct vsp1_vb2_buffer * +to_vsp1_vb2_buffer(struct vb2_v4l2_buffer *vbuf) +{ + return container_of(vbuf, struct vsp1_vb2_buffer, buf); +} + +struct vsp1_video { + struct list_head list; + struct vsp1_device *vsp1; + struct vsp1_rwpf *rwpf; + + struct video_device video; + enum v4l2_buf_type type; + struct media_pad pad; + + struct mutex lock; + + unsigned int pipe_index; + + struct vb2_queue queue; + spinlock_t irqlock; + struct list_head irqqueue; +}; + +static inline struct vsp1_video *to_vsp1_video(struct video_device *vdev) +{ + return container_of(vdev, struct vsp1_video, video); +} + +void vsp1_video_suspend(struct vsp1_device *vsp1); +void vsp1_video_resume(struct vsp1_device *vsp1); + +struct vsp1_video *vsp1_video_create(struct vsp1_device *vsp1, + struct vsp1_rwpf *rwpf); +void vsp1_video_cleanup(struct vsp1_video *video); + +#endif /* __VSP1_VIDEO_H__ */ diff --git a/drivers/media/platform/renesas/vsp1/vsp1_wpf.c b/drivers/media/platform/renesas/vsp1/vsp1_wpf.c new file mode 100644 index 000000000..94e91d7bb --- /dev/null +++ b/drivers/media/platform/renesas/vsp1/vsp1_wpf.c @@ -0,0 +1,613 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * vsp1_wpf.c -- R-Car VSP1 Write Pixel Formatter + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ + +#include <linux/device.h> + +#include <media/v4l2-subdev.h> + +#include "vsp1.h" +#include "vsp1_dl.h" +#include "vsp1_pipe.h" +#include "vsp1_rwpf.h" +#include "vsp1_video.h" + +#define WPF_GEN2_MAX_WIDTH 2048U +#define WPF_GEN2_MAX_HEIGHT 2048U +#define WPF_GEN3_MAX_WIDTH 8190U +#define WPF_GEN3_MAX_HEIGHT 8190U + +/* ----------------------------------------------------------------------------- + * Device Access + */ + +static inline void vsp1_wpf_write(struct vsp1_rwpf *wpf, + struct vsp1_dl_body *dlb, u32 reg, u32 data) +{ + vsp1_dl_body_write(dlb, reg + wpf->entity.index * VI6_WPF_OFFSET, data); +} + +/* ----------------------------------------------------------------------------- + * Controls + */ + +enum wpf_flip_ctrl { + WPF_CTRL_VFLIP = 0, + WPF_CTRL_HFLIP = 1, +}; + +static int vsp1_wpf_set_rotation(struct vsp1_rwpf *wpf, unsigned int rotation) +{ + struct vsp1_video *video = wpf->video; + struct v4l2_mbus_framefmt *sink_format; + struct v4l2_mbus_framefmt *source_format; + bool rotate; + int ret = 0; + + /* + * Only consider the 0°/180° from/to 90°/270° modifications, the rest + * is taken care of by the flipping configuration. + */ + rotate = rotation == 90 || rotation == 270; + if (rotate == wpf->flip.rotate) + return 0; + + /* Changing rotation isn't allowed when buffers are allocated. */ + mutex_lock(&video->lock); + + if (vb2_is_busy(&video->queue)) { + ret = -EBUSY; + goto done; + } + + sink_format = vsp1_entity_get_pad_format(&wpf->entity, + wpf->entity.config, + RWPF_PAD_SINK); + source_format = vsp1_entity_get_pad_format(&wpf->entity, + wpf->entity.config, + RWPF_PAD_SOURCE); + + mutex_lock(&wpf->entity.lock); + + if (rotate) { + source_format->width = sink_format->height; + source_format->height = sink_format->width; + } else { + source_format->width = sink_format->width; + source_format->height = sink_format->height; + } + + wpf->flip.rotate = rotate; + + mutex_unlock(&wpf->entity.lock); + +done: + mutex_unlock(&video->lock); + return ret; +} + +static int vsp1_wpf_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct vsp1_rwpf *wpf = + container_of(ctrl->handler, struct vsp1_rwpf, ctrls); + unsigned int rotation; + u32 flip = 0; + int ret; + + /* Update the rotation. */ + rotation = wpf->flip.ctrls.rotate ? wpf->flip.ctrls.rotate->val : 0; + ret = vsp1_wpf_set_rotation(wpf, rotation); + if (ret < 0) + return ret; + + /* + * Compute the flip value resulting from all three controls, with + * rotation by 180° flipping the image in both directions. Store the + * result in the pending flip field for the next frame that will be + * processed. + */ + if (wpf->flip.ctrls.vflip->val) + flip |= BIT(WPF_CTRL_VFLIP); + + if (wpf->flip.ctrls.hflip && wpf->flip.ctrls.hflip->val) + flip |= BIT(WPF_CTRL_HFLIP); + + if (rotation == 180 || rotation == 270) + flip ^= BIT(WPF_CTRL_VFLIP) | BIT(WPF_CTRL_HFLIP); + + spin_lock_irq(&wpf->flip.lock); + wpf->flip.pending = flip; + spin_unlock_irq(&wpf->flip.lock); + + return 0; +} + +static const struct v4l2_ctrl_ops vsp1_wpf_ctrl_ops = { + .s_ctrl = vsp1_wpf_s_ctrl, +}; + +static int wpf_init_controls(struct vsp1_rwpf *wpf) +{ + struct vsp1_device *vsp1 = wpf->entity.vsp1; + unsigned int num_flip_ctrls; + + spin_lock_init(&wpf->flip.lock); + + if (wpf->entity.index != 0) { + /* Only WPF0 supports flipping. */ + num_flip_ctrls = 0; + } else if (vsp1_feature(vsp1, VSP1_HAS_WPF_HFLIP)) { + /* + * When horizontal flip is supported the WPF implements three + * controls (horizontal flip, vertical flip and rotation). + */ + num_flip_ctrls = 3; + } else if (vsp1_feature(vsp1, VSP1_HAS_WPF_VFLIP)) { + /* + * When only vertical flip is supported the WPF implements a + * single control (vertical flip). + */ + num_flip_ctrls = 1; + } else { + /* Otherwise flipping is not supported. */ + num_flip_ctrls = 0; + } + + vsp1_rwpf_init_ctrls(wpf, num_flip_ctrls); + + if (num_flip_ctrls >= 1) { + wpf->flip.ctrls.vflip = + v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops, + V4L2_CID_VFLIP, 0, 1, 1, 0); + } + + if (num_flip_ctrls == 3) { + wpf->flip.ctrls.hflip = + v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops, + V4L2_CID_HFLIP, 0, 1, 1, 0); + wpf->flip.ctrls.rotate = + v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops, + V4L2_CID_ROTATE, 0, 270, 90, 0); + v4l2_ctrl_cluster(3, &wpf->flip.ctrls.vflip); + } + + if (wpf->ctrls.error) { + dev_err(vsp1->dev, "wpf%u: failed to initialize controls\n", + wpf->entity.index); + return wpf->ctrls.error; + } + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Core Operations + */ + +static int wpf_s_stream(struct v4l2_subdev *subdev, int enable) +{ + struct vsp1_rwpf *wpf = to_rwpf(subdev); + struct vsp1_device *vsp1 = wpf->entity.vsp1; + + if (enable) + return 0; + + /* + * Write to registers directly when stopping the stream as there will be + * no pipeline run to apply the display list. + */ + vsp1_write(vsp1, VI6_WPF_IRQ_ENB(wpf->entity.index), 0); + vsp1_write(vsp1, wpf->entity.index * VI6_WPF_OFFSET + + VI6_WPF_SRCRPF, 0); + + return 0; +} + +/* ----------------------------------------------------------------------------- + * V4L2 Subdevice Operations + */ + +static const struct v4l2_subdev_video_ops wpf_video_ops = { + .s_stream = wpf_s_stream, +}; + +static const struct v4l2_subdev_ops wpf_ops = { + .video = &wpf_video_ops, + .pad = &vsp1_rwpf_pad_ops, +}; + +/* ----------------------------------------------------------------------------- + * VSP1 Entity Operations + */ + +static void vsp1_wpf_destroy(struct vsp1_entity *entity) +{ + struct vsp1_rwpf *wpf = entity_to_rwpf(entity); + + vsp1_dlm_destroy(wpf->dlm); +} + +static int wpf_configure_writeback_chain(struct vsp1_rwpf *wpf, + struct vsp1_dl_list *dl) +{ + unsigned int index = wpf->entity.index; + struct vsp1_dl_list *dl_next; + struct vsp1_dl_body *dlb; + + dl_next = vsp1_dl_list_get(wpf->dlm); + if (!dl_next) { + dev_err(wpf->entity.vsp1->dev, + "Failed to obtain a dl list, disabling writeback\n"); + return -ENOMEM; + } + + dlb = vsp1_dl_list_get_body0(dl_next); + vsp1_dl_body_write(dlb, VI6_WPF_WRBCK_CTRL(index), 0); + vsp1_dl_list_add_chain(dl, dl_next); + + return 0; +} + +static void wpf_configure_stream(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev); + struct vsp1_device *vsp1 = wpf->entity.vsp1; + const struct v4l2_mbus_framefmt *source_format; + const struct v4l2_mbus_framefmt *sink_format; + unsigned int index = wpf->entity.index; + unsigned int i; + u32 outfmt = 0; + u32 srcrpf = 0; + int ret; + + sink_format = vsp1_entity_get_pad_format(&wpf->entity, + wpf->entity.config, + RWPF_PAD_SINK); + source_format = vsp1_entity_get_pad_format(&wpf->entity, + wpf->entity.config, + RWPF_PAD_SOURCE); + + /* Format */ + if (!pipe->lif || wpf->writeback) { + const struct v4l2_pix_format_mplane *format = &wpf->format; + const struct vsp1_format_info *fmtinfo = wpf->fmtinfo; + + outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT; + + if (wpf->flip.rotate) + outfmt |= VI6_WPF_OUTFMT_ROT; + + if (fmtinfo->alpha) + outfmt |= VI6_WPF_OUTFMT_PXA; + if (fmtinfo->swap_yc) + outfmt |= VI6_WPF_OUTFMT_SPYCS; + if (fmtinfo->swap_uv) + outfmt |= VI6_WPF_OUTFMT_SPUVS; + + /* Destination stride and byte swapping. */ + vsp1_wpf_write(wpf, dlb, VI6_WPF_DSTM_STRIDE_Y, + format->plane_fmt[0].bytesperline); + if (format->num_planes > 1) + vsp1_wpf_write(wpf, dlb, VI6_WPF_DSTM_STRIDE_C, + format->plane_fmt[1].bytesperline); + + vsp1_wpf_write(wpf, dlb, VI6_WPF_DSWAP, fmtinfo->swap); + + if (vsp1_feature(vsp1, VSP1_HAS_WPF_HFLIP) && index == 0) + vsp1_wpf_write(wpf, dlb, VI6_WPF_ROT_CTRL, + VI6_WPF_ROT_CTRL_LN16 | + (256 << VI6_WPF_ROT_CTRL_LMEM_WD_SHIFT)); + } + + if (sink_format->code != source_format->code) + outfmt |= VI6_WPF_OUTFMT_CSC; + + wpf->outfmt = outfmt; + + vsp1_dl_body_write(dlb, VI6_DPR_WPF_FPORCH(index), + VI6_DPR_WPF_FPORCH_FP_WPFN); + + /* + * Sources. If the pipeline has a single input and BRx is not used, + * configure it as the master layer. Otherwise configure all + * inputs as sub-layers and select the virtual RPF as the master + * layer. + */ + for (i = 0; i < vsp1->info->rpf_count; ++i) { + struct vsp1_rwpf *input = pipe->inputs[i]; + + if (!input) + continue; + + srcrpf |= (!pipe->brx && pipe->num_inputs == 1) + ? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index) + : VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index); + } + + if (pipe->brx) + srcrpf |= pipe->brx->type == VSP1_ENTITY_BRU + ? VI6_WPF_SRCRPF_VIRACT_MST + : VI6_WPF_SRCRPF_VIRACT2_MST; + + vsp1_wpf_write(wpf, dlb, VI6_WPF_SRCRPF, srcrpf); + + /* Enable interrupts. */ + vsp1_dl_body_write(dlb, VI6_WPF_IRQ_STA(index), 0); + vsp1_dl_body_write(dlb, VI6_WPF_IRQ_ENB(index), + VI6_WPF_IRQ_ENB_DFEE); + + /* + * Configure writeback for display pipelines (the wpf writeback flag is + * never set for memory-to-memory pipelines). Start by adding a chained + * display list to disable writeback after a single frame, and process + * to enable writeback. If the display list allocation fails don't + * enable writeback as we wouldn't be able to safely disable it, + * resulting in possible memory corruption. + */ + if (wpf->writeback) { + ret = wpf_configure_writeback_chain(wpf, dl); + if (ret < 0) + wpf->writeback = false; + } + + vsp1_dl_body_write(dlb, VI6_WPF_WRBCK_CTRL(index), + wpf->writeback ? VI6_WPF_WRBCK_CTRL_WBMD : 0); +} + +static void wpf_configure_frame(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + const unsigned int mask = BIT(WPF_CTRL_VFLIP) + | BIT(WPF_CTRL_HFLIP); + struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev); + unsigned long flags; + u32 outfmt; + + spin_lock_irqsave(&wpf->flip.lock, flags); + wpf->flip.active = (wpf->flip.active & ~mask) + | (wpf->flip.pending & mask); + spin_unlock_irqrestore(&wpf->flip.lock, flags); + + outfmt = (wpf->alpha << VI6_WPF_OUTFMT_PDV_SHIFT) | wpf->outfmt; + + if (wpf->flip.active & BIT(WPF_CTRL_VFLIP)) + outfmt |= VI6_WPF_OUTFMT_FLP; + if (wpf->flip.active & BIT(WPF_CTRL_HFLIP)) + outfmt |= VI6_WPF_OUTFMT_HFLP; + + vsp1_wpf_write(wpf, dlb, VI6_WPF_OUTFMT, outfmt); +} + +static void wpf_configure_partition(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_dl_list *dl, + struct vsp1_dl_body *dlb) +{ + struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev); + struct vsp1_device *vsp1 = wpf->entity.vsp1; + struct vsp1_rwpf_memory mem = wpf->mem; + const struct v4l2_mbus_framefmt *sink_format; + const struct v4l2_pix_format_mplane *format = &wpf->format; + const struct vsp1_format_info *fmtinfo = wpf->fmtinfo; + unsigned int width; + unsigned int height; + unsigned int left; + unsigned int offset; + unsigned int flip; + unsigned int i; + + sink_format = vsp1_entity_get_pad_format(&wpf->entity, + wpf->entity.config, + RWPF_PAD_SINK); + width = sink_format->width; + height = sink_format->height; + left = 0; + + /* + * Cropping. The partition algorithm can split the image into + * multiple slices. + */ + if (pipe->partitions > 1) { + width = pipe->partition->wpf.width; + left = pipe->partition->wpf.left; + } + + vsp1_wpf_write(wpf, dlb, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN | + (0 << VI6_WPF_SZCLIP_OFST_SHIFT) | + (width << VI6_WPF_SZCLIP_SIZE_SHIFT)); + vsp1_wpf_write(wpf, dlb, VI6_WPF_VSZCLIP, VI6_WPF_SZCLIP_EN | + (0 << VI6_WPF_SZCLIP_OFST_SHIFT) | + (height << VI6_WPF_SZCLIP_SIZE_SHIFT)); + + /* + * For display pipelines without writeback enabled there's no memory + * address to configure, return now. + */ + if (pipe->lif && !wpf->writeback) + return; + + /* + * Update the memory offsets based on flipping configuration. + * The destination addresses point to the locations where the + * VSP starts writing to memory, which can be any corner of the + * image depending on the combination of flipping and rotation. + */ + + /* + * First take the partition left coordinate into account. + * Compute the offset to order the partitions correctly on the + * output based on whether flipping is enabled. Consider + * horizontal flipping when rotation is disabled but vertical + * flipping when rotation is enabled, as rotating the image + * switches the horizontal and vertical directions. The offset + * is applied horizontally or vertically accordingly. + */ + flip = wpf->flip.active; + + if (flip & BIT(WPF_CTRL_HFLIP) && !wpf->flip.rotate) + offset = format->width - left - width; + else if (flip & BIT(WPF_CTRL_VFLIP) && wpf->flip.rotate) + offset = format->height - left - width; + else + offset = left; + + for (i = 0; i < format->num_planes; ++i) { + unsigned int hsub = i > 0 ? fmtinfo->hsub : 1; + unsigned int vsub = i > 0 ? fmtinfo->vsub : 1; + + if (wpf->flip.rotate) + mem.addr[i] += offset / vsub + * format->plane_fmt[i].bytesperline; + else + mem.addr[i] += offset / hsub + * fmtinfo->bpp[i] / 8; + } + + if (flip & BIT(WPF_CTRL_VFLIP)) { + /* + * When rotating the output (after rotation) image + * height is equal to the partition width (before + * rotation). Otherwise it is equal to the output + * image height. + */ + if (wpf->flip.rotate) + height = width; + else + height = format->height; + + mem.addr[0] += (height - 1) + * format->plane_fmt[0].bytesperline; + + if (format->num_planes > 1) { + offset = (height / fmtinfo->vsub - 1) + * format->plane_fmt[1].bytesperline; + mem.addr[1] += offset; + mem.addr[2] += offset; + } + } + + if (wpf->flip.rotate && !(flip & BIT(WPF_CTRL_HFLIP))) { + unsigned int hoffset = max(0, (int)format->width - 16); + + /* + * Compute the output coordinate. The partition + * horizontal (left) offset becomes a vertical offset. + */ + for (i = 0; i < format->num_planes; ++i) { + unsigned int hsub = i > 0 ? fmtinfo->hsub : 1; + + mem.addr[i] += hoffset / hsub + * fmtinfo->bpp[i] / 8; + } + } + + /* + * On Gen3 hardware the SPUVS bit has no effect on 3-planar + * formats. Swap the U and V planes manually in that case. + */ + if (vsp1->info->gen == 3 && format->num_planes == 3 && + fmtinfo->swap_uv) + swap(mem.addr[1], mem.addr[2]); + + vsp1_wpf_write(wpf, dlb, VI6_WPF_DSTM_ADDR_Y, mem.addr[0]); + vsp1_wpf_write(wpf, dlb, VI6_WPF_DSTM_ADDR_C0, mem.addr[1]); + vsp1_wpf_write(wpf, dlb, VI6_WPF_DSTM_ADDR_C1, mem.addr[2]); + + /* + * Writeback operates in single-shot mode and lasts for a single frame, + * reset the writeback flag to false for the next frame. + */ + wpf->writeback = false; +} + +static unsigned int wpf_max_width(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe) +{ + struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev); + + return wpf->flip.rotate ? 256 : wpf->max_width; +} + +static void wpf_partition(struct vsp1_entity *entity, + struct vsp1_pipeline *pipe, + struct vsp1_partition *partition, + unsigned int partition_idx, + struct vsp1_partition_window *window) +{ + partition->wpf = *window; +} + +static const struct vsp1_entity_operations wpf_entity_ops = { + .destroy = vsp1_wpf_destroy, + .configure_stream = wpf_configure_stream, + .configure_frame = wpf_configure_frame, + .configure_partition = wpf_configure_partition, + .max_width = wpf_max_width, + .partition = wpf_partition, +}; + +/* ----------------------------------------------------------------------------- + * Initialization and Cleanup + */ + +struct vsp1_rwpf *vsp1_wpf_create(struct vsp1_device *vsp1, unsigned int index) +{ + struct vsp1_rwpf *wpf; + char name[6]; + int ret; + + wpf = devm_kzalloc(vsp1->dev, sizeof(*wpf), GFP_KERNEL); + if (wpf == NULL) + return ERR_PTR(-ENOMEM); + + if (vsp1->info->gen == 2) { + wpf->max_width = WPF_GEN2_MAX_WIDTH; + wpf->max_height = WPF_GEN2_MAX_HEIGHT; + } else { + wpf->max_width = WPF_GEN3_MAX_WIDTH; + wpf->max_height = WPF_GEN3_MAX_HEIGHT; + } + + wpf->entity.ops = &wpf_entity_ops; + wpf->entity.type = VSP1_ENTITY_WPF; + wpf->entity.index = index; + + sprintf(name, "wpf.%u", index); + ret = vsp1_entity_init(vsp1, &wpf->entity, name, 2, &wpf_ops, + MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER); + if (ret < 0) + return ERR_PTR(ret); + + /* Initialize the display list manager. */ + wpf->dlm = vsp1_dlm_create(vsp1, index, 64); + if (!wpf->dlm) { + ret = -ENOMEM; + goto error; + } + + /* Initialize the control handler. */ + ret = wpf_init_controls(wpf); + if (ret < 0) { + dev_err(vsp1->dev, "wpf%u: failed to initialize controls\n", + index); + goto error; + } + + v4l2_ctrl_handler_setup(&wpf->ctrls); + + return wpf; + +error: + vsp1_entity_destroy(&wpf->entity); + return ERR_PTR(ret); +} |