1 files changed, 372 insertions, 0 deletions
diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c
new file mode 100644
index 000000000..9627294fe
--- /dev/null
+++ b/drivers/misc/eeprom/eeprom_93cx6.c
@@ -0,0 +1,372 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
+ * <http://rt2x00.serialmonkey.com>
+ *
+ * Module: eeprom_93cx6
+ * Abstract: EEPROM reader routines for 93cx6 chipsets.
+ * Supported chipsets: 93c46 & 93c66.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/eeprom_93cx6.h>
+
+MODULE_AUTHOR("http://rt2x00.serialmonkey.com");
+MODULE_VERSION("1.0");
+MODULE_DESCRIPTION("EEPROM 93cx6 chip driver");
+MODULE_LICENSE("GPL");
+
+static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
+{
+	eeprom->reg_data_clock = 1;
+	eeprom->register_write(eeprom);
+
+	/*
+	 * Add a short delay for the pulse to work.
+	 * According to the specifications the "maximum minimum"
+	 * time should be 450ns.
+	 */
+	ndelay(450);
+}
+
+static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
+{
+	eeprom->reg_data_clock = 0;
+	eeprom->register_write(eeprom);
+
+	/*
+	 * Add a short delay for the pulse to work.
+	 * According to the specifications the "maximum minimum"
+	 * time should be 450ns.
+	 */
+	ndelay(450);
+}
+
+static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom)
+{
+	/*
+	 * Clear all flags, and enable chip select.
+	 */
+	eeprom->register_read(eeprom);
+	eeprom->reg_data_in = 0;
+	eeprom->reg_data_out = 0;
+	eeprom->reg_data_clock = 0;
+	eeprom->reg_chip_select = 1;
+	eeprom->drive_data = 1;
+	eeprom->register_write(eeprom);
+
+	/*
+	 * kick a pulse.
+	 */
+	eeprom_93cx6_pulse_high(eeprom);
+	eeprom_93cx6_pulse_low(eeprom);
+}
+
+static void eeprom_93cx6_cleanup(struct eeprom_93cx6 *eeprom)
+{
+	/*
+	 * Clear chip_select and data_in flags.
+	 */
+	eeprom->register_read(eeprom);
+	eeprom->reg_data_in = 0;
+	eeprom->reg_chip_select = 0;
+	eeprom->register_write(eeprom);
+
+	/*
+	 * kick a pulse.
+	 */
+	eeprom_93cx6_pulse_high(eeprom);
+	eeprom_93cx6_pulse_low(eeprom);
+}
+
+static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom,
+	const u16 data, const u16 count)
+{
+	unsigned int i;
+
+	eeprom->register_read(eeprom);
+
+	/*
+	 * Clear data flags.
+	 */
+	eeprom->reg_data_in = 0;
+	eeprom->reg_data_out = 0;
+	eeprom->drive_data = 1;
+
+	/*
+	 * Start writing all bits.
+	 */
+	for (i = count; i > 0; i--) {
+		/*
+		 * Check if this bit needs to be set.
+		 */
+		eeprom->reg_data_in = !!(data & (1 << (i - 1)));
+
+		/*
+		 * Write the bit to the eeprom register.
+		 */
+		eeprom->register_write(eeprom);
+
+		/*
+		 * Kick a pulse.
+		 */
+		eeprom_93cx6_pulse_high(eeprom);
+		eeprom_93cx6_pulse_low(eeprom);
+	}
+
+	eeprom->reg_data_in = 0;
+	eeprom->register_write(eeprom);
+}
+
+static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom,
+	u16 *data, const u16 count)
+{
+	unsigned int i;
+	u16 buf = 0;
+
+	eeprom->register_read(eeprom);
+
+	/*
+	 * Clear data flags.
+	 */
+	eeprom->reg_data_in = 0;
+	eeprom->reg_data_out = 0;
+	eeprom->drive_data = 0;
+
+	/*
+	 * Start reading all bits.
+	 */
+	for (i = count; i > 0; i--) {
+		eeprom_93cx6_pulse_high(eeprom);
+
+		eeprom->register_read(eeprom);
+
+		/*
+		 * Clear data_in flag.
+		 */
+		eeprom->reg_data_in = 0;
+
+		/*
+		 * Read if the bit has been set.
+		 */
+		if (eeprom->reg_data_out)
+			buf |= (1 << (i - 1));
+
+		eeprom_93cx6_pulse_low(eeprom);
+	}
+
+	*data = buf;
+}
+
+/**
+ * eeprom_93cx6_read - Read a word from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Word index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ *
+ * This function will read the eeprom data as host-endian word
+ * into the given data pointer.
+ */
+void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word,
+	u16 *data)
+{
+	u16 command;
+
+	/*
+	 * Initialize the eeprom register
+	 */
+	eeprom_93cx6_startup(eeprom);
+
+	/*
+	 * Select the read opcode and the word to be read.
+	 */
+	command = (PCI_EEPROM_READ_OPCODE << eeprom->width) | word;
+	eeprom_93cx6_write_bits(eeprom, command,
+		PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+	/*
+	 * Read the requested 16 bits.
+	 */
+	eeprom_93cx6_read_bits(eeprom, data, 16);
+
+	/*
+	 * Cleanup eeprom register.
+	 */
+	eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_read);
+
+/**
+ * eeprom_93cx6_multiread - Read multiple words from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Word index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ * @words: Number of words that should be read.
+ *
+ * This function will read all requested words from the eeprom,
+ * this is done by calling eeprom_93cx6_read() multiple times.
+ * But with the additional change that while the eeprom_93cx6_read
+ * will return host ordered bytes, this method will return little
+ * endian words.
+ */
+void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word,
+	__le16 *data, const u16 words)
+{
+	unsigned int i;
+	u16 tmp;
+
+	for (i = 0; i < words; i++) {
+		tmp = 0;
+		eeprom_93cx6_read(eeprom, word + i, &tmp);
+		data[i] = cpu_to_le16(tmp);
+	}
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
+
+/**
+ * eeprom_93cx6_readb - Read a byte from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @byte: Byte index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ *
+ * This function will read a byte of the eeprom data
+ * into the given data pointer.
+ */
+void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, const u8 byte,
+	u8 *data)
+{
+	u16 command;
+	u16 tmp;
+
+	/*
+	 * Initialize the eeprom register
+	 */
+	eeprom_93cx6_startup(eeprom);
+
+	/*
+	 * Select the read opcode and the byte to be read.
+	 */
+	command = (PCI_EEPROM_READ_OPCODE << (eeprom->width + 1)) | byte;
+	eeprom_93cx6_write_bits(eeprom, command,
+		PCI_EEPROM_WIDTH_OPCODE + eeprom->width + 1);
+
+	/*
+	 * Read the requested 8 bits.
+	 */
+	eeprom_93cx6_read_bits(eeprom, &tmp, 8);
+	*data = tmp & 0xff;
+
+	/*
+	 * Cleanup eeprom register.
+	 */
+	eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_readb);
+
+/**
+ * eeprom_93cx6_multireadb - Read multiple bytes from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @byte: Index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ * @bytes: Number of bytes that should be read.
+ *
+ * This function will read all requested bytes from the eeprom,
+ * this is done by calling eeprom_93cx6_readb() multiple times.
+ */
+void eeprom_93cx6_multireadb(struct eeprom_93cx6 *eeprom, const u8 byte,
+	u8 *data, const u16 bytes)
+{
+	unsigned int i;
+
+	for (i = 0; i < bytes; i++)
+		eeprom_93cx6_readb(eeprom, byte + i, &data[i]);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_multireadb);
+
+/**
+ * eeprom_93cx6_wren - set the write enable state
+ * @eeprom: Pointer to eeprom structure
+ * @enable: true to enable writes, otherwise disable writes
+ *
+ * Set the EEPROM write enable state to either allow or deny
+ * writes depending on the @enable value.
+ */
+void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable)
+{
+	u16 command;
+
+	/* start the command */
+	eeprom_93cx6_startup(eeprom);
+
+	/* create command to enable/disable */
+
+	command = enable ? PCI_EEPROM_EWEN_OPCODE : PCI_EEPROM_EWDS_OPCODE;
+	command <<= (eeprom->width - 2);
+
+	eeprom_93cx6_write_bits(eeprom, command,
+				PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+	eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_wren);
+
+/**
+ * eeprom_93cx6_write - write data to the EEPROM
+ * @eeprom: Pointer to eeprom structure
+ * @addr: Address to write data to.
+ * @data: The data to write to address @addr.
+ *
+ * Write the @data to the specified @addr in the EEPROM and
+ * waiting for the device to finish writing.
+ *
+ * Note, since we do not expect large number of write operations
+ * we delay in between parts of the operation to avoid using excessive
+ * amounts of CPU time busy waiting.
+ */
+void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, u8 addr, u16 data)
+{
+	int timeout = 100;
+	u16 command;
+
+	/* start the command */
+	eeprom_93cx6_startup(eeprom);
+
+	command = PCI_EEPROM_WRITE_OPCODE << eeprom->width;
+	command |= addr;
+
+	/* send write command */
+	eeprom_93cx6_write_bits(eeprom, command,
+				PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+	/* send data */
+	eeprom_93cx6_write_bits(eeprom, data, 16);
+
+	/* get ready to check for busy */
+	eeprom->drive_data = 0;
+	eeprom->reg_chip_select = 1;
+	eeprom->register_write(eeprom);
+
+	/* wait at-least 250ns to get DO to be the busy signal */
+	usleep_range(1000, 2000);
+
+	/* wait for DO to go high to signify finish */
+
+	while (true) {
+		eeprom->register_read(eeprom);
+
+		if (eeprom->reg_data_out)
+			break;
+
+		usleep_range(1000, 2000);
+
+		if (--timeout <= 0) {
+			printk(KERN_ERR "%s: timeout\n", __func__);
+			break;
+		}
+	}
+
+	eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_write);