summaryrefslogtreecommitdiffstats
path: root/drivers/misc/habanalabs/common/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/habanalabs/common/pci')
-rw-r--r--drivers/misc/habanalabs/common/pci/Makefile2
-rw-r--r--drivers/misc/habanalabs/common/pci/pci.c433
2 files changed, 435 insertions, 0 deletions
diff --git a/drivers/misc/habanalabs/common/pci/Makefile b/drivers/misc/habanalabs/common/pci/Makefile
new file mode 100644
index 000000000..dc922a686
--- /dev/null
+++ b/drivers/misc/habanalabs/common/pci/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+HL_COMMON_PCI_FILES := common/pci/pci.o
diff --git a/drivers/misc/habanalabs/common/pci/pci.c b/drivers/misc/habanalabs/common/pci/pci.c
new file mode 100644
index 000000000..5fe3da5fb
--- /dev/null
+++ b/drivers/misc/habanalabs/common/pci/pci.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Copyright 2016-2019 HabanaLabs, Ltd.
+ * All Rights Reserved.
+ */
+
+#include "../habanalabs.h"
+#include "../../include/hw_ip/pci/pci_general.h"
+
+#include <linux/pci.h>
+
+#define HL_PLDM_PCI_ELBI_TIMEOUT_MSEC (HL_PCI_ELBI_TIMEOUT_MSEC * 100)
+
+#define IATU_REGION_CTRL_REGION_EN_MASK BIT(31)
+#define IATU_REGION_CTRL_MATCH_MODE_MASK BIT(30)
+#define IATU_REGION_CTRL_NUM_MATCH_EN_MASK BIT(19)
+#define IATU_REGION_CTRL_BAR_NUM_MASK GENMASK(10, 8)
+
+/**
+ * hl_pci_bars_map() - Map PCI BARs.
+ * @hdev: Pointer to hl_device structure.
+ * @name: Array of BAR names.
+ * @is_wc: Array with flag per BAR whether a write-combined mapping is needed.
+ *
+ * Request PCI regions and map them to kernel virtual addresses.
+ *
+ * Return: 0 on success, non-zero for failure.
+ */
+int hl_pci_bars_map(struct hl_device *hdev, const char * const name[3],
+ bool is_wc[3])
+{
+ struct pci_dev *pdev = hdev->pdev;
+ int rc, i, bar;
+
+ rc = pci_request_regions(pdev, HL_NAME);
+ if (rc) {
+ dev_err(hdev->dev, "Cannot obtain PCI resources\n");
+ return rc;
+ }
+
+ for (i = 0 ; i < 3 ; i++) {
+ bar = i * 2; /* 64-bit BARs */
+ hdev->pcie_bar[bar] = is_wc[i] ?
+ pci_ioremap_wc_bar(pdev, bar) :
+ pci_ioremap_bar(pdev, bar);
+ if (!hdev->pcie_bar[bar]) {
+ dev_err(hdev->dev, "pci_ioremap%s_bar failed for %s\n",
+ is_wc[i] ? "_wc" : "", name[i]);
+ rc = -ENODEV;
+ goto err;
+ }
+ }
+
+ return 0;
+
+err:
+ for (i = 2 ; i >= 0 ; i--) {
+ bar = i * 2; /* 64-bit BARs */
+ if (hdev->pcie_bar[bar])
+ iounmap(hdev->pcie_bar[bar]);
+ }
+
+ pci_release_regions(pdev);
+
+ return rc;
+}
+
+/**
+ * hl_pci_bars_unmap() - Unmap PCI BARS.
+ * @hdev: Pointer to hl_device structure.
+ *
+ * Release all PCI BARs and unmap their virtual addresses.
+ */
+static void hl_pci_bars_unmap(struct hl_device *hdev)
+{
+ struct pci_dev *pdev = hdev->pdev;
+ int i, bar;
+
+ for (i = 2 ; i >= 0 ; i--) {
+ bar = i * 2; /* 64-bit BARs */
+ iounmap(hdev->pcie_bar[bar]);
+ }
+
+ pci_release_regions(pdev);
+}
+
+int hl_pci_elbi_read(struct hl_device *hdev, u64 addr, u32 *data)
+{
+ struct pci_dev *pdev = hdev->pdev;
+ ktime_t timeout;
+ u64 msec;
+ u32 val;
+
+ if (hdev->pldm)
+ msec = HL_PLDM_PCI_ELBI_TIMEOUT_MSEC;
+ else
+ msec = HL_PCI_ELBI_TIMEOUT_MSEC;
+
+ /* Clear previous status */
+ pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, 0);
+
+ pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_ADDR, (u32) addr);
+ pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_CTRL, 0);
+
+ timeout = ktime_add_ms(ktime_get(), msec);
+ for (;;) {
+ pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, &val);
+ if (val & PCI_CONFIG_ELBI_STS_MASK)
+ break;
+ if (ktime_compare(ktime_get(), timeout) > 0) {
+ pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS,
+ &val);
+ break;
+ }
+
+ usleep_range(300, 500);
+ }
+
+ if ((val & PCI_CONFIG_ELBI_STS_MASK) == PCI_CONFIG_ELBI_STS_DONE) {
+ pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_DATA, data);
+
+ return 0;
+ }
+
+ if (val & PCI_CONFIG_ELBI_STS_ERR) {
+ dev_err(hdev->dev, "Error reading from ELBI\n");
+ return -EIO;
+ }
+
+ if (!(val & PCI_CONFIG_ELBI_STS_MASK)) {
+ dev_err(hdev->dev, "ELBI read didn't finish in time\n");
+ return -EIO;
+ }
+
+ dev_err(hdev->dev, "ELBI read has undefined bits in status\n");
+ return -EIO;
+}
+
+/**
+ * hl_pci_elbi_write() - Write through the ELBI interface.
+ * @hdev: Pointer to hl_device structure.
+ * @addr: Address to write to
+ * @data: Data to write
+ *
+ * Return: 0 on success, negative value for failure.
+ */
+static int hl_pci_elbi_write(struct hl_device *hdev, u64 addr, u32 data)
+{
+ struct pci_dev *pdev = hdev->pdev;
+ ktime_t timeout;
+ u64 msec;
+ u32 val;
+
+ if (hdev->pldm)
+ msec = HL_PLDM_PCI_ELBI_TIMEOUT_MSEC;
+ else
+ msec = HL_PCI_ELBI_TIMEOUT_MSEC;
+
+ /* Clear previous status */
+ pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, 0);
+
+ pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_ADDR, (u32) addr);
+ pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_DATA, data);
+ pci_write_config_dword(pdev, mmPCI_CONFIG_ELBI_CTRL,
+ PCI_CONFIG_ELBI_CTRL_WRITE);
+
+ timeout = ktime_add_ms(ktime_get(), msec);
+ for (;;) {
+ pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS, &val);
+ if (val & PCI_CONFIG_ELBI_STS_MASK)
+ break;
+ if (ktime_compare(ktime_get(), timeout) > 0) {
+ pci_read_config_dword(pdev, mmPCI_CONFIG_ELBI_STS,
+ &val);
+ break;
+ }
+
+ usleep_range(300, 500);
+ }
+
+ if ((val & PCI_CONFIG_ELBI_STS_MASK) == PCI_CONFIG_ELBI_STS_DONE)
+ return 0;
+
+ if (val & PCI_CONFIG_ELBI_STS_ERR)
+ return -EIO;
+
+ if (!(val & PCI_CONFIG_ELBI_STS_MASK)) {
+ dev_err(hdev->dev, "ELBI write didn't finish in time\n");
+ return -EIO;
+ }
+
+ dev_err(hdev->dev, "ELBI write has undefined bits in status\n");
+ return -EIO;
+}
+
+/**
+ * hl_pci_iatu_write() - iatu write routine.
+ * @hdev: Pointer to hl_device structure.
+ * @addr: Address to write to
+ * @data: Data to write
+ *
+ * Return: 0 on success, negative value for failure.
+ */
+int hl_pci_iatu_write(struct hl_device *hdev, u32 addr, u32 data)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ u32 dbi_offset;
+ int rc;
+
+ dbi_offset = addr & 0xFFF;
+
+ /* Ignore result of writing to pcie_aux_dbi_reg_addr as it could fail
+ * in case the firmware security is enabled
+ */
+ hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0x00300000);
+
+ rc = hl_pci_elbi_write(hdev, prop->pcie_dbi_base_address + dbi_offset,
+ data);
+
+ if (rc)
+ return -EIO;
+
+ return 0;
+}
+
+/**
+ * hl_pci_set_inbound_region() - Configure inbound region
+ * @hdev: Pointer to hl_device structure.
+ * @region: Inbound region number.
+ * @pci_region: Inbound region parameters.
+ *
+ * Configure the iATU inbound region.
+ *
+ * Return: 0 on success, negative value for failure.
+ */
+int hl_pci_set_inbound_region(struct hl_device *hdev, u8 region,
+ struct hl_inbound_pci_region *pci_region)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ u64 bar_phys_base, region_base, region_end_address;
+ u32 offset, ctrl_reg_val;
+ int rc = 0;
+
+ /* region offset */
+ offset = (0x200 * region) + 0x100;
+
+ if (pci_region->mode == PCI_ADDRESS_MATCH_MODE) {
+ bar_phys_base = hdev->pcie_bar_phys[pci_region->bar];
+ region_base = bar_phys_base + pci_region->offset_in_bar;
+ region_end_address = region_base + pci_region->size - 1;
+
+ rc |= hl_pci_iatu_write(hdev, offset + 0x8,
+ lower_32_bits(region_base));
+ rc |= hl_pci_iatu_write(hdev, offset + 0xC,
+ upper_32_bits(region_base));
+ rc |= hl_pci_iatu_write(hdev, offset + 0x10,
+ lower_32_bits(region_end_address));
+ }
+
+ /* Point to the specified address */
+ rc |= hl_pci_iatu_write(hdev, offset + 0x14, lower_32_bits(pci_region->addr));
+ rc |= hl_pci_iatu_write(hdev, offset + 0x18, upper_32_bits(pci_region->addr));
+
+ /* Set bar type as memory */
+ rc |= hl_pci_iatu_write(hdev, offset + 0x0, 0);
+
+ /* Enable + bar/address match + match enable + bar number */
+ ctrl_reg_val = FIELD_PREP(IATU_REGION_CTRL_REGION_EN_MASK, 1);
+ ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_MATCH_MODE_MASK, pci_region->mode);
+ ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_NUM_MATCH_EN_MASK, 1);
+
+ if (pci_region->mode == PCI_BAR_MATCH_MODE)
+ ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_BAR_NUM_MASK, pci_region->bar);
+
+ rc |= hl_pci_iatu_write(hdev, offset + 0x4, ctrl_reg_val);
+
+ /* Return the DBI window to the default location
+ * Ignore result of writing to pcie_aux_dbi_reg_addr as it could fail
+ * in case the firmware security is enabled
+ */
+ hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);
+
+ if (rc)
+ dev_err(hdev->dev, "failed to map bar %u to 0x%08llx\n",
+ pci_region->bar, pci_region->addr);
+
+ return rc;
+}
+
+/**
+ * hl_pci_set_outbound_region() - Configure outbound region 0
+ * @hdev: Pointer to hl_device structure.
+ * @pci_region: Outbound region parameters.
+ *
+ * Configure the iATU outbound region 0.
+ *
+ * Return: 0 on success, negative value for failure.
+ */
+int hl_pci_set_outbound_region(struct hl_device *hdev,
+ struct hl_outbound_pci_region *pci_region)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ u64 outbound_region_end_address;
+ int rc = 0;
+
+ /* Outbound Region 0 */
+ outbound_region_end_address =
+ pci_region->addr + pci_region->size - 1;
+ rc |= hl_pci_iatu_write(hdev, 0x008,
+ lower_32_bits(pci_region->addr));
+ rc |= hl_pci_iatu_write(hdev, 0x00C,
+ upper_32_bits(pci_region->addr));
+ rc |= hl_pci_iatu_write(hdev, 0x010,
+ lower_32_bits(outbound_region_end_address));
+ rc |= hl_pci_iatu_write(hdev, 0x014, 0);
+
+ rc |= hl_pci_iatu_write(hdev, 0x018, 0);
+
+ rc |= hl_pci_iatu_write(hdev, 0x020,
+ upper_32_bits(outbound_region_end_address));
+ /* Increase region size */
+ rc |= hl_pci_iatu_write(hdev, 0x000, 0x00002000);
+ /* Enable */
+ rc |= hl_pci_iatu_write(hdev, 0x004, 0x80000000);
+
+ /* Return the DBI window to the default location
+ * Ignore result of writing to pcie_aux_dbi_reg_addr as it could fail
+ * in case the firmware security is enabled
+ */
+ hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);
+
+ return rc;
+}
+
+/**
+ * hl_get_pci_memory_region() - get PCI region for given address
+ * @hdev: Pointer to hl_device structure.
+ * @addr: device address
+ *
+ * @return region index on success, otherwise PCI_REGION_NUMBER (invalid
+ * region index)
+ */
+enum pci_region hl_get_pci_memory_region(struct hl_device *hdev, u64 addr)
+{
+ int i;
+
+ for (i = 0 ; i < PCI_REGION_NUMBER ; i++) {
+ struct pci_mem_region *region = &hdev->pci_mem_region[i];
+
+ if (!region->used)
+ continue;
+
+ if ((addr >= region->region_base) &&
+ (addr < region->region_base + region->region_size))
+ return i;
+ }
+
+ return PCI_REGION_NUMBER;
+}
+
+/**
+ * hl_pci_init() - PCI initialization code.
+ * @hdev: Pointer to hl_device structure.
+ *
+ * Set DMA masks, initialize the PCI controller and map the PCI BARs.
+ *
+ * Return: 0 on success, non-zero for failure.
+ */
+int hl_pci_init(struct hl_device *hdev)
+{
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ struct pci_dev *pdev = hdev->pdev;
+ int rc;
+
+ rc = pci_enable_device_mem(pdev);
+ if (rc) {
+ dev_err(hdev->dev, "can't enable PCI device\n");
+ return rc;
+ }
+
+ pci_set_master(pdev);
+
+ rc = hdev->asic_funcs->pci_bars_map(hdev);
+ if (rc) {
+ dev_err(hdev->dev, "Failed to map PCI BAR addresses\n");
+ goto disable_device;
+ }
+
+ rc = hdev->asic_funcs->init_iatu(hdev);
+ if (rc) {
+ dev_err(hdev->dev, "PCI controller was not initialized successfully\n");
+ goto unmap_pci_bars;
+ }
+
+ /* Driver must sleep in order for FW to finish the iATU configuration */
+ if (hdev->asic_prop.iatu_done_by_fw)
+ usleep_range(2000, 3000);
+
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(prop->dma_mask));
+ if (rc) {
+ dev_err(hdev->dev,
+ "Failed to set dma mask to %d bits, error %d\n",
+ prop->dma_mask, rc);
+ goto unmap_pci_bars;
+ }
+
+ dma_set_max_seg_size(&pdev->dev, U32_MAX);
+
+ return 0;
+
+unmap_pci_bars:
+ hl_pci_bars_unmap(hdev);
+disable_device:
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+
+ return rc;
+}
+
+/**
+ * hl_pci_fini() - PCI finalization code.
+ * @hdev: Pointer to hl_device structure
+ *
+ * Unmap PCI bars and disable PCI device.
+ */
+void hl_pci_fini(struct hl_device *hdev)
+{
+ hl_pci_bars_unmap(hdev);
+
+ pci_clear_master(hdev->pdev);
+ pci_disable_device(hdev->pdev);
+}