summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci-xenon-phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sdhci-xenon-phy.c')
-rw-r--r--drivers/mmc/host/sdhci-xenon-phy.c848
1 files changed, 848 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
new file mode 100644
index 000000000..8cf3a375d
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -0,0 +1,848 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PHY support for Xenon SDHC
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author: Hu Ziji <huziji@marvell.com>
+ * Date: 2016-8-24
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/ktime.h>
+#include <linux/of_address.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci-xenon.h"
+
+/* Register base for eMMC PHY 5.0 Version */
+#define XENON_EMMC_5_0_PHY_REG_BASE 0x0160
+/* Register base for eMMC PHY 5.1 Version */
+#define XENON_EMMC_PHY_REG_BASE 0x0170
+
+#define XENON_EMMC_PHY_TIMING_ADJUST XENON_EMMC_PHY_REG_BASE
+#define XENON_EMMC_5_0_PHY_TIMING_ADJUST XENON_EMMC_5_0_PHY_REG_BASE
+#define XENON_TIMING_ADJUST_SLOW_MODE BIT(29)
+#define XENON_TIMING_ADJUST_SDIO_MODE BIT(28)
+#define XENON_SAMPL_INV_QSP_PHASE_SELECT BIT(18)
+#define XENON_SAMPL_INV_QSP_PHASE_SELECT_SHIFT 18
+#define XENON_PHY_INITIALIZAION BIT(31)
+#define XENON_WAIT_CYCLE_BEFORE_USING_MASK 0xF
+#define XENON_WAIT_CYCLE_BEFORE_USING_SHIFT 12
+#define XENON_FC_SYNC_EN_DURATION_MASK 0xF
+#define XENON_FC_SYNC_EN_DURATION_SHIFT 8
+#define XENON_FC_SYNC_RST_EN_DURATION_MASK 0xF
+#define XENON_FC_SYNC_RST_EN_DURATION_SHIFT 4
+#define XENON_FC_SYNC_RST_DURATION_MASK 0xF
+#define XENON_FC_SYNC_RST_DURATION_SHIFT 0
+
+#define XENON_EMMC_PHY_FUNC_CONTROL (XENON_EMMC_PHY_REG_BASE + 0x4)
+#define XENON_EMMC_5_0_PHY_FUNC_CONTROL \
+ (XENON_EMMC_5_0_PHY_REG_BASE + 0x4)
+#define XENON_ASYNC_DDRMODE_MASK BIT(23)
+#define XENON_ASYNC_DDRMODE_SHIFT 23
+#define XENON_CMD_DDR_MODE BIT(16)
+#define XENON_DQ_DDR_MODE_SHIFT 8
+#define XENON_DQ_DDR_MODE_MASK 0xFF
+#define XENON_DQ_ASYNC_MODE BIT(4)
+
+#define XENON_EMMC_PHY_PAD_CONTROL (XENON_EMMC_PHY_REG_BASE + 0x8)
+#define XENON_EMMC_5_0_PHY_PAD_CONTROL \
+ (XENON_EMMC_5_0_PHY_REG_BASE + 0x8)
+#define XENON_REC_EN_SHIFT 24
+#define XENON_REC_EN_MASK 0xF
+#define XENON_FC_DQ_RECEN BIT(24)
+#define XENON_FC_CMD_RECEN BIT(25)
+#define XENON_FC_QSP_RECEN BIT(26)
+#define XENON_FC_QSN_RECEN BIT(27)
+#define XENON_OEN_QSN BIT(28)
+#define XENON_AUTO_RECEN_CTRL BIT(30)
+#define XENON_FC_ALL_CMOS_RECEIVER 0xF000
+
+#define XENON_EMMC5_FC_QSP_PD BIT(18)
+#define XENON_EMMC5_FC_QSP_PU BIT(22)
+#define XENON_EMMC5_FC_CMD_PD BIT(17)
+#define XENON_EMMC5_FC_CMD_PU BIT(21)
+#define XENON_EMMC5_FC_DQ_PD BIT(16)
+#define XENON_EMMC5_FC_DQ_PU BIT(20)
+
+#define XENON_EMMC_PHY_PAD_CONTROL1 (XENON_EMMC_PHY_REG_BASE + 0xC)
+#define XENON_EMMC5_1_FC_QSP_PD BIT(9)
+#define XENON_EMMC5_1_FC_QSP_PU BIT(25)
+#define XENON_EMMC5_1_FC_CMD_PD BIT(8)
+#define XENON_EMMC5_1_FC_CMD_PU BIT(24)
+#define XENON_EMMC5_1_FC_DQ_PD 0xFF
+#define XENON_EMMC5_1_FC_DQ_PU (0xFF << 16)
+
+#define XENON_EMMC_PHY_PAD_CONTROL2 (XENON_EMMC_PHY_REG_BASE + 0x10)
+#define XENON_EMMC_5_0_PHY_PAD_CONTROL2 \
+ (XENON_EMMC_5_0_PHY_REG_BASE + 0xC)
+#define XENON_ZNR_MASK 0x1F
+#define XENON_ZNR_SHIFT 8
+#define XENON_ZPR_MASK 0x1F
+/* Preferred ZNR and ZPR value vary between different boards.
+ * The specific ZNR and ZPR value should be defined here
+ * according to board actual timing.
+ */
+#define XENON_ZNR_DEF_VALUE 0xF
+#define XENON_ZPR_DEF_VALUE 0xF
+
+#define XENON_EMMC_PHY_DLL_CONTROL (XENON_EMMC_PHY_REG_BASE + 0x14)
+#define XENON_EMMC_5_0_PHY_DLL_CONTROL \
+ (XENON_EMMC_5_0_PHY_REG_BASE + 0x10)
+#define XENON_DLL_ENABLE BIT(31)
+#define XENON_DLL_UPDATE_STROBE_5_0 BIT(30)
+#define XENON_DLL_REFCLK_SEL BIT(30)
+#define XENON_DLL_UPDATE BIT(23)
+#define XENON_DLL_PHSEL1_SHIFT 24
+#define XENON_DLL_PHSEL0_SHIFT 16
+#define XENON_DLL_PHASE_MASK 0x3F
+#define XENON_DLL_PHASE_90_DEGREE 0x1F
+#define XENON_DLL_FAST_LOCK BIT(5)
+#define XENON_DLL_GAIN2X BIT(3)
+#define XENON_DLL_BYPASS_EN BIT(0)
+
+#define XENON_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST \
+ (XENON_EMMC_5_0_PHY_REG_BASE + 0x14)
+#define XENON_EMMC_5_0_PHY_LOGIC_TIMING_VALUE 0x5A54
+#define XENON_EMMC_PHY_LOGIC_TIMING_ADJUST (XENON_EMMC_PHY_REG_BASE + 0x18)
+#define XENON_LOGIC_TIMING_VALUE 0x00AA8977
+
+/*
+ * List offset of PHY registers and some special register values
+ * in eMMC PHY 5.0 or eMMC PHY 5.1
+ */
+struct xenon_emmc_phy_regs {
+ /* Offset of Timing Adjust register */
+ u16 timing_adj;
+ /* Offset of Func Control register */
+ u16 func_ctrl;
+ /* Offset of Pad Control register */
+ u16 pad_ctrl;
+ /* Offset of Pad Control register 2 */
+ u16 pad_ctrl2;
+ /* Offset of DLL Control register */
+ u16 dll_ctrl;
+ /* Offset of Logic Timing Adjust register */
+ u16 logic_timing_adj;
+ /* DLL Update Enable bit */
+ u32 dll_update;
+ /* value in Logic Timing Adjustment register */
+ u32 logic_timing_val;
+};
+
+static const char * const phy_types[] = {
+ "emmc 5.0 phy",
+ "emmc 5.1 phy"
+};
+
+enum xenon_phy_type_enum {
+ EMMC_5_0_PHY,
+ EMMC_5_1_PHY,
+ NR_PHY_TYPES
+};
+
+enum soc_pad_ctrl_type {
+ SOC_PAD_SD,
+ SOC_PAD_FIXED_1_8V,
+};
+
+struct soc_pad_ctrl {
+ /* Register address of SoC PHY PAD ctrl */
+ void __iomem *reg;
+ /* SoC PHY PAD ctrl type */
+ enum soc_pad_ctrl_type pad_type;
+ /* SoC specific operation to set SoC PHY PAD */
+ void (*set_soc_pad)(struct sdhci_host *host,
+ unsigned char signal_voltage);
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_0_phy_regs = {
+ .timing_adj = XENON_EMMC_5_0_PHY_TIMING_ADJUST,
+ .func_ctrl = XENON_EMMC_5_0_PHY_FUNC_CONTROL,
+ .pad_ctrl = XENON_EMMC_5_0_PHY_PAD_CONTROL,
+ .pad_ctrl2 = XENON_EMMC_5_0_PHY_PAD_CONTROL2,
+ .dll_ctrl = XENON_EMMC_5_0_PHY_DLL_CONTROL,
+ .logic_timing_adj = XENON_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST,
+ .dll_update = XENON_DLL_UPDATE_STROBE_5_0,
+ .logic_timing_val = XENON_EMMC_5_0_PHY_LOGIC_TIMING_VALUE,
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_1_phy_regs = {
+ .timing_adj = XENON_EMMC_PHY_TIMING_ADJUST,
+ .func_ctrl = XENON_EMMC_PHY_FUNC_CONTROL,
+ .pad_ctrl = XENON_EMMC_PHY_PAD_CONTROL,
+ .pad_ctrl2 = XENON_EMMC_PHY_PAD_CONTROL2,
+ .dll_ctrl = XENON_EMMC_PHY_DLL_CONTROL,
+ .logic_timing_adj = XENON_EMMC_PHY_LOGIC_TIMING_ADJUST,
+ .dll_update = XENON_DLL_UPDATE,
+ .logic_timing_val = XENON_LOGIC_TIMING_VALUE,
+};
+
+/*
+ * eMMC PHY configuration and operations
+ */
+struct xenon_emmc_phy_params {
+ bool slow_mode;
+
+ u8 znr;
+ u8 zpr;
+
+ /* Nr of consecutive Sampling Points of a Valid Sampling Window */
+ u8 nr_tun_times;
+ /* Divider for calculating Tuning Step */
+ u8 tun_step_divider;
+
+ struct soc_pad_ctrl pad_ctrl;
+};
+
+static int xenon_alloc_emmc_phy(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_params *params;
+
+ params = devm_kzalloc(mmc_dev(host->mmc), sizeof(*params), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ priv->phy_params = params;
+ if (priv->phy_type == EMMC_5_0_PHY)
+ priv->emmc_phy_regs = &xenon_emmc_5_0_phy_regs;
+ else
+ priv->emmc_phy_regs = &xenon_emmc_5_1_phy_regs;
+
+ return 0;
+}
+
+/*
+ * eMMC 5.0/5.1 PHY init/re-init.
+ * eMMC PHY init should be executed after:
+ * 1. SDCLK frequency changes.
+ * 2. SDCLK is stopped and re-enabled.
+ * 3. config in emmc_phy_regs->timing_adj and emmc_phy_regs->func_ctrl
+ * are changed
+ */
+static int xenon_emmc_phy_init(struct sdhci_host *host)
+{
+ u32 reg;
+ u32 wait, clock;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg |= XENON_PHY_INITIALIZAION;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+
+ /* Add duration of FC_SYNC_RST */
+ wait = ((reg >> XENON_FC_SYNC_RST_DURATION_SHIFT) &
+ XENON_FC_SYNC_RST_DURATION_MASK);
+ /* Add interval between FC_SYNC_EN and FC_SYNC_RST */
+ wait += ((reg >> XENON_FC_SYNC_RST_EN_DURATION_SHIFT) &
+ XENON_FC_SYNC_RST_EN_DURATION_MASK);
+ /* Add duration of asserting FC_SYNC_EN */
+ wait += ((reg >> XENON_FC_SYNC_EN_DURATION_SHIFT) &
+ XENON_FC_SYNC_EN_DURATION_MASK);
+ /* Add duration of waiting for PHY */
+ wait += ((reg >> XENON_WAIT_CYCLE_BEFORE_USING_SHIFT) &
+ XENON_WAIT_CYCLE_BEFORE_USING_MASK);
+ /* 4 additional bus clock and 4 AXI bus clock are required */
+ wait += 8;
+ wait <<= 20;
+
+ clock = host->clock;
+ if (!clock)
+ /* Use the possibly slowest bus frequency value */
+ clock = XENON_LOWEST_SDCLK_FREQ;
+ /* get the wait time */
+ wait /= clock;
+ wait++;
+ /* wait for host eMMC PHY init completes */
+ udelay(wait);
+
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg &= XENON_PHY_INITIALIZAION;
+ if (reg) {
+ dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n",
+ wait);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+#define ARMADA_3700_SOC_PAD_1_8V 0x1
+#define ARMADA_3700_SOC_PAD_3_3V 0x0
+
+static void armada_3700_soc_pad_voltage_set(struct sdhci_host *host,
+ unsigned char signal_voltage)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_params *params = priv->phy_params;
+
+ if (params->pad_ctrl.pad_type == SOC_PAD_FIXED_1_8V) {
+ writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+ } else if (params->pad_ctrl.pad_type == SOC_PAD_SD) {
+ if (signal_voltage == MMC_SIGNAL_VOLTAGE_180)
+ writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
+ else if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+ writel(ARMADA_3700_SOC_PAD_3_3V, params->pad_ctrl.reg);
+ }
+}
+
+/*
+ * Set SoC PHY voltage PAD control register,
+ * according to the operation voltage on PAD.
+ * The detailed operation depends on SoC implementation.
+ */
+static void xenon_emmc_phy_set_soc_pad(struct sdhci_host *host,
+ unsigned char signal_voltage)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_params *params = priv->phy_params;
+
+ if (!params->pad_ctrl.reg)
+ return;
+
+ if (params->pad_ctrl.set_soc_pad)
+ params->pad_ctrl.set_soc_pad(host, signal_voltage);
+}
+
+/*
+ * Enable eMMC PHY HW DLL
+ * DLL should be enabled and stable before HS200/SDR104 tuning,
+ * and before HS400 data strobe setting.
+ */
+static int xenon_emmc_phy_enable_dll(struct sdhci_host *host)
+{
+ u32 reg;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+ ktime_t timeout;
+
+ if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+ return -EINVAL;
+
+ reg = sdhci_readl(host, phy_regs->dll_ctrl);
+ if (reg & XENON_DLL_ENABLE)
+ return 0;
+
+ /* Enable DLL */
+ reg = sdhci_readl(host, phy_regs->dll_ctrl);
+ reg |= (XENON_DLL_ENABLE | XENON_DLL_FAST_LOCK);
+
+ /*
+ * Set Phase as 90 degree, which is most common value.
+ * Might set another value if necessary.
+ * The granularity is 1 degree.
+ */
+ reg &= ~((XENON_DLL_PHASE_MASK << XENON_DLL_PHSEL0_SHIFT) |
+ (XENON_DLL_PHASE_MASK << XENON_DLL_PHSEL1_SHIFT));
+ reg |= ((XENON_DLL_PHASE_90_DEGREE << XENON_DLL_PHSEL0_SHIFT) |
+ (XENON_DLL_PHASE_90_DEGREE << XENON_DLL_PHSEL1_SHIFT));
+
+ reg &= ~XENON_DLL_BYPASS_EN;
+ reg |= phy_regs->dll_update;
+ if (priv->phy_type == EMMC_5_1_PHY)
+ reg &= ~XENON_DLL_REFCLK_SEL;
+ sdhci_writel(host, reg, phy_regs->dll_ctrl);
+
+ /* Wait max 32 ms */
+ timeout = ktime_add_ms(ktime_get(), 32);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ if (sdhci_readw(host, XENON_SLOT_EXT_PRESENT_STATE) &
+ XENON_DLL_LOCK_STATE)
+ break;
+ if (timedout) {
+ dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
+ return -ETIMEDOUT;
+ }
+ udelay(100);
+ }
+ return 0;
+}
+
+/*
+ * Config to eMMC PHY to prepare for tuning.
+ * Enable HW DLL and set the TUNING_STEP
+ */
+static int xenon_emmc_phy_config_tuning(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_params *params = priv->phy_params;
+ u32 reg, tuning_step;
+ int ret;
+
+ if (host->clock <= MMC_HIGH_52_MAX_DTR)
+ return -EINVAL;
+
+ ret = xenon_emmc_phy_enable_dll(host);
+ if (ret)
+ return ret;
+
+ /* Achieve TUNING_STEP with HW DLL help */
+ reg = sdhci_readl(host, XENON_SLOT_DLL_CUR_DLY_VAL);
+ tuning_step = reg / params->tun_step_divider;
+ if (unlikely(tuning_step > XENON_TUNING_STEP_MASK)) {
+ dev_warn(mmc_dev(host->mmc),
+ "HS200 TUNING_STEP %d is larger than MAX value\n",
+ tuning_step);
+ tuning_step = XENON_TUNING_STEP_MASK;
+ }
+
+ /* Set TUNING_STEP for later tuning */
+ reg = sdhci_readl(host, XENON_SLOT_OP_STATUS_CTRL);
+ reg &= ~(XENON_TUN_CONSECUTIVE_TIMES_MASK <<
+ XENON_TUN_CONSECUTIVE_TIMES_SHIFT);
+ reg |= (params->nr_tun_times << XENON_TUN_CONSECUTIVE_TIMES_SHIFT);
+ reg &= ~(XENON_TUNING_STEP_MASK << XENON_TUNING_STEP_SHIFT);
+ reg |= (tuning_step << XENON_TUNING_STEP_SHIFT);
+ sdhci_writel(host, reg, XENON_SLOT_OP_STATUS_CTRL);
+
+ return 0;
+}
+
+static void xenon_emmc_phy_disable_strobe(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ u32 reg;
+
+ /* Disable both SDHC Data Strobe and Enhanced Strobe */
+ reg = sdhci_readl(host, XENON_SLOT_EMMC_CTRL);
+ reg &= ~(XENON_ENABLE_DATA_STROBE | XENON_ENABLE_RESP_STROBE);
+ sdhci_writel(host, reg, XENON_SLOT_EMMC_CTRL);
+
+ /* Clear Strobe line Pull down or Pull up */
+ if (priv->phy_type == EMMC_5_0_PHY) {
+ reg = sdhci_readl(host, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+ reg &= ~(XENON_EMMC5_FC_QSP_PD | XENON_EMMC5_FC_QSP_PU);
+ sdhci_writel(host, reg, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+ } else {
+ reg = sdhci_readl(host, XENON_EMMC_PHY_PAD_CONTROL1);
+ reg &= ~(XENON_EMMC5_1_FC_QSP_PD | XENON_EMMC5_1_FC_QSP_PU);
+ sdhci_writel(host, reg, XENON_EMMC_PHY_PAD_CONTROL1);
+ }
+}
+
+/* Set HS400 Data Strobe and Enhanced Strobe */
+static void xenon_emmc_phy_strobe_delay_adj(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ u32 reg;
+
+ if (WARN_ON(host->timing != MMC_TIMING_MMC_HS400))
+ return;
+
+ if (host->clock <= MMC_HIGH_52_MAX_DTR)
+ return;
+
+ dev_dbg(mmc_dev(host->mmc), "starts HS400 strobe delay adjustment\n");
+
+ xenon_emmc_phy_enable_dll(host);
+
+ /* Enable SDHC Data Strobe */
+ reg = sdhci_readl(host, XENON_SLOT_EMMC_CTRL);
+ reg |= XENON_ENABLE_DATA_STROBE;
+ /*
+ * Enable SDHC Enhanced Strobe if supported
+ * Xenon Enhanced Strobe should be enabled only when
+ * 1. card is in HS400 mode and
+ * 2. SDCLK is higher than 52MHz
+ * 3. DLL is enabled
+ */
+ if (host->mmc->ios.enhanced_strobe)
+ reg |= XENON_ENABLE_RESP_STROBE;
+ sdhci_writel(host, reg, XENON_SLOT_EMMC_CTRL);
+
+ /* Set Data Strobe Pull down */
+ if (priv->phy_type == EMMC_5_0_PHY) {
+ reg = sdhci_readl(host, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+ reg |= XENON_EMMC5_FC_QSP_PD;
+ reg &= ~XENON_EMMC5_FC_QSP_PU;
+ sdhci_writel(host, reg, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+ } else {
+ reg = sdhci_readl(host, XENON_EMMC_PHY_PAD_CONTROL1);
+ reg |= XENON_EMMC5_1_FC_QSP_PD;
+ reg &= ~XENON_EMMC5_1_FC_QSP_PU;
+ sdhci_writel(host, reg, XENON_EMMC_PHY_PAD_CONTROL1);
+ }
+}
+
+/*
+ * If eMMC PHY Slow Mode is required in lower speed mode (SDCLK < 55MHz)
+ * in SDR mode, enable Slow Mode to bypass eMMC PHY.
+ * SDIO slower SDR mode also requires Slow Mode.
+ *
+ * If Slow Mode is enabled, return true.
+ * Otherwise, return false.
+ */
+static bool xenon_emmc_phy_slow_mode(struct sdhci_host *host,
+ unsigned char timing)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_params *params = priv->phy_params;
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+ u32 reg;
+ int ret;
+
+ if (host->clock > MMC_HIGH_52_MAX_DTR)
+ return false;
+
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ /* When in slower SDR mode, enable Slow Mode for SDIO
+ * or when Slow Mode flag is set
+ */
+ switch (timing) {
+ case MMC_TIMING_LEGACY:
+ /*
+ * If Slow Mode is required, enable Slow Mode by default
+ * in early init phase to avoid any potential issue.
+ */
+ if (params->slow_mode) {
+ reg |= XENON_TIMING_ADJUST_SLOW_MODE;
+ ret = true;
+ } else {
+ reg &= ~XENON_TIMING_ADJUST_SLOW_MODE;
+ ret = false;
+ }
+ break;
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_SDR12:
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_MMC_HS:
+ if ((priv->init_card_type == MMC_TYPE_SDIO) ||
+ params->slow_mode) {
+ reg |= XENON_TIMING_ADJUST_SLOW_MODE;
+ ret = true;
+ break;
+ }
+ fallthrough;
+ default:
+ reg &= ~XENON_TIMING_ADJUST_SLOW_MODE;
+ ret = false;
+ }
+
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+ return ret;
+}
+
+/*
+ * Set-up eMMC 5.0/5.1 PHY.
+ * Specific configuration depends on the current speed mode in use.
+ */
+static void xenon_emmc_phy_set(struct sdhci_host *host,
+ unsigned char timing)
+{
+ u32 reg;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_params *params = priv->phy_params;
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+
+ dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting starts\n");
+
+ /* Setup pad, set bit[28] and bits[26:24] */
+ reg = sdhci_readl(host, phy_regs->pad_ctrl);
+ reg |= (XENON_FC_DQ_RECEN | XENON_FC_CMD_RECEN |
+ XENON_FC_QSP_RECEN | XENON_OEN_QSN);
+ /* All FC_XX_RECEIVCE should be set as CMOS Type */
+ reg |= XENON_FC_ALL_CMOS_RECEIVER;
+ sdhci_writel(host, reg, phy_regs->pad_ctrl);
+
+ /* Set CMD and DQ Pull Up */
+ if (priv->phy_type == EMMC_5_0_PHY) {
+ reg = sdhci_readl(host, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+ reg |= (XENON_EMMC5_FC_CMD_PU | XENON_EMMC5_FC_DQ_PU);
+ reg &= ~(XENON_EMMC5_FC_CMD_PD | XENON_EMMC5_FC_DQ_PD);
+ sdhci_writel(host, reg, XENON_EMMC_5_0_PHY_PAD_CONTROL);
+ } else {
+ reg = sdhci_readl(host, XENON_EMMC_PHY_PAD_CONTROL1);
+ reg |= (XENON_EMMC5_1_FC_CMD_PU | XENON_EMMC5_1_FC_DQ_PU);
+ reg &= ~(XENON_EMMC5_1_FC_CMD_PD | XENON_EMMC5_1_FC_DQ_PD);
+ sdhci_writel(host, reg, XENON_EMMC_PHY_PAD_CONTROL1);
+ }
+
+ if (timing == MMC_TIMING_LEGACY) {
+ xenon_emmc_phy_slow_mode(host, timing);
+ goto phy_init;
+ }
+
+ /*
+ * If SDIO card, set SDIO Mode
+ * Otherwise, clear SDIO Mode
+ */
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ if (priv->init_card_type == MMC_TYPE_SDIO)
+ reg |= XENON_TIMING_ADJUST_SDIO_MODE;
+ else
+ reg &= ~XENON_TIMING_ADJUST_SDIO_MODE;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+
+ if (xenon_emmc_phy_slow_mode(host, timing))
+ goto phy_init;
+
+ /*
+ * Set preferred ZNR and ZPR value
+ * The ZNR and ZPR value vary between different boards.
+ * Define them both in sdhci-xenon-emmc-phy.h.
+ */
+ reg = sdhci_readl(host, phy_regs->pad_ctrl2);
+ reg &= ~((XENON_ZNR_MASK << XENON_ZNR_SHIFT) | XENON_ZPR_MASK);
+ reg |= ((params->znr << XENON_ZNR_SHIFT) | params->zpr);
+ sdhci_writel(host, reg, phy_regs->pad_ctrl2);
+
+ /*
+ * When setting EMMC_PHY_FUNC_CONTROL register,
+ * SD clock should be disabled
+ */
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+ reg = sdhci_readl(host, phy_regs->func_ctrl);
+ switch (timing) {
+ case MMC_TIMING_MMC_HS400:
+ reg |= (XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) |
+ XENON_CMD_DDR_MODE;
+ reg &= ~XENON_DQ_ASYNC_MODE;
+ break;
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ reg |= (XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) |
+ XENON_CMD_DDR_MODE | XENON_DQ_ASYNC_MODE;
+ break;
+ default:
+ reg &= ~((XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) |
+ XENON_CMD_DDR_MODE);
+ reg |= XENON_DQ_ASYNC_MODE;
+ }
+ sdhci_writel(host, reg, phy_regs->func_ctrl);
+
+ /* Enable bus clock */
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+ if (timing == MMC_TIMING_MMC_HS400)
+ /* Hardware team recommend a value for HS400 */
+ sdhci_writel(host, phy_regs->logic_timing_val,
+ phy_regs->logic_timing_adj);
+ else
+ xenon_emmc_phy_disable_strobe(host);
+
+phy_init:
+ xenon_emmc_phy_init(host);
+
+ dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n");
+}
+
+static int get_dt_pad_ctrl_data(struct sdhci_host *host,
+ struct device_node *np,
+ struct xenon_emmc_phy_params *params)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int ret = 0;
+ const char *name;
+ struct resource iomem;
+
+ if (priv->hw_version == XENON_A3700)
+ params->pad_ctrl.set_soc_pad = armada_3700_soc_pad_voltage_set;
+ else
+ return 0;
+
+ if (of_address_to_resource(np, 1, &iomem)) {
+ dev_err(mmc_dev(host->mmc), "Unable to find SoC PAD ctrl register address for %pOFn\n",
+ np);
+ return -EINVAL;
+ }
+
+ params->pad_ctrl.reg = devm_ioremap_resource(mmc_dev(host->mmc),
+ &iomem);
+ if (IS_ERR(params->pad_ctrl.reg))
+ return PTR_ERR(params->pad_ctrl.reg);
+
+ ret = of_property_read_string(np, "marvell,pad-type", &name);
+ if (ret) {
+ dev_err(mmc_dev(host->mmc), "Unable to determine SoC PHY PAD ctrl type\n");
+ return ret;
+ }
+ if (!strcmp(name, "sd")) {
+ params->pad_ctrl.pad_type = SOC_PAD_SD;
+ } else if (!strcmp(name, "fixed-1-8v")) {
+ params->pad_ctrl.pad_type = SOC_PAD_FIXED_1_8V;
+ } else {
+ dev_err(mmc_dev(host->mmc), "Unsupported SoC PHY PAD ctrl type %s\n",
+ name);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int xenon_emmc_phy_parse_params(struct sdhci_host *host,
+ struct device *dev,
+ struct xenon_emmc_phy_params *params)
+{
+ u32 value;
+
+ params->slow_mode = false;
+ if (device_property_read_bool(dev, "marvell,xenon-phy-slow-mode"))
+ params->slow_mode = true;
+
+ params->znr = XENON_ZNR_DEF_VALUE;
+ if (!device_property_read_u32(dev, "marvell,xenon-phy-znr", &value))
+ params->znr = value & XENON_ZNR_MASK;
+
+ params->zpr = XENON_ZPR_DEF_VALUE;
+ if (!device_property_read_u32(dev, "marvell,xenon-phy-zpr", &value))
+ params->zpr = value & XENON_ZPR_MASK;
+
+ params->nr_tun_times = XENON_TUN_CONSECUTIVE_TIMES;
+ if (!device_property_read_u32(dev, "marvell,xenon-phy-nr-success-tun",
+ &value))
+ params->nr_tun_times = value & XENON_TUN_CONSECUTIVE_TIMES_MASK;
+
+ params->tun_step_divider = XENON_TUNING_STEP_DIVIDER;
+ if (!device_property_read_u32(dev, "marvell,xenon-phy-tun-step-divider",
+ &value))
+ params->tun_step_divider = value & 0xFF;
+
+ if (dev->of_node)
+ return get_dt_pad_ctrl_data(host, dev->of_node, params);
+ return 0;
+}
+
+/* Set SoC PHY Voltage PAD */
+void xenon_soc_pad_ctrl(struct sdhci_host *host,
+ unsigned char signal_voltage)
+{
+ xenon_emmc_phy_set_soc_pad(host, signal_voltage);
+}
+
+/*
+ * Setting PHY when card is working in High Speed Mode.
+ * HS400 set Data Strobe and Enhanced Strobe if it is supported.
+ * HS200/SDR104 set tuning config to prepare for tuning.
+ */
+static int xenon_hs_delay_adj(struct sdhci_host *host)
+{
+ int ret = 0;
+
+ if (WARN_ON(host->clock <= XENON_DEFAULT_SDCLK_FREQ))
+ return -EINVAL;
+
+ switch (host->timing) {
+ case MMC_TIMING_MMC_HS400:
+ xenon_emmc_phy_strobe_delay_adj(host);
+ return 0;
+ case MMC_TIMING_MMC_HS200:
+ case MMC_TIMING_UHS_SDR104:
+ return xenon_emmc_phy_config_tuning(host);
+ case MMC_TIMING_MMC_DDR52:
+ case MMC_TIMING_UHS_DDR50:
+ /*
+ * DDR Mode requires driver to scan Sampling Fixed Delay Line,
+ * to find out a perfect operation sampling point.
+ * It is hard to implement such a scan in host driver
+ * since initiating commands by host driver is not safe.
+ * Thus so far just keep PHY Sampling Fixed Delay in
+ * default value of DDR mode.
+ *
+ * If any timing issue occurs in DDR mode on Marvell products,
+ * please contact maintainer for internal support in Marvell.
+ */
+ dev_warn_once(mmc_dev(host->mmc), "Timing issue might occur in DDR mode\n");
+ return 0;
+ }
+
+ return ret;
+}
+
+/*
+ * Adjust PHY setting.
+ * PHY setting should be adjusted when SDCLK frequency, Bus Width
+ * or Speed Mode is changed.
+ * Additional config are required when card is working in High Speed mode,
+ * after leaving Legacy Mode.
+ */
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int ret = 0;
+
+ if (!host->clock) {
+ priv->clock = 0;
+ return 0;
+ }
+
+ /*
+ * The timing, frequency or bus width is changed,
+ * better to set eMMC PHY based on current setting
+ * and adjust Xenon SDHC delay.
+ */
+ if ((host->clock == priv->clock) &&
+ (ios->bus_width == priv->bus_width) &&
+ (ios->timing == priv->timing))
+ return 0;
+
+ xenon_emmc_phy_set(host, ios->timing);
+
+ /* Update the record */
+ priv->bus_width = ios->bus_width;
+
+ priv->timing = ios->timing;
+ priv->clock = host->clock;
+
+ /* Legacy mode is a special case */
+ if (ios->timing == MMC_TIMING_LEGACY)
+ return 0;
+
+ if (host->clock > XENON_DEFAULT_SDCLK_FREQ)
+ ret = xenon_hs_delay_adj(host);
+ return ret;
+}
+
+static int xenon_add_phy(struct device *dev, struct sdhci_host *host,
+ const char *phy_name)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int ret;
+
+ priv->phy_type = match_string(phy_types, NR_PHY_TYPES, phy_name);
+ if (priv->phy_type < 0) {
+ dev_err(mmc_dev(host->mmc),
+ "Unable to determine PHY name %s. Use default eMMC 5.1 PHY\n",
+ phy_name);
+ priv->phy_type = EMMC_5_1_PHY;
+ }
+
+ ret = xenon_alloc_emmc_phy(host);
+ if (ret)
+ return ret;
+
+ return xenon_emmc_phy_parse_params(host, dev, priv->phy_params);
+}
+
+int xenon_phy_parse_params(struct device *dev, struct sdhci_host *host)
+{
+ const char *phy_type = NULL;
+
+ if (!device_property_read_string(dev, "marvell,xenon-phy-type", &phy_type))
+ return xenon_add_phy(dev, host, phy_type);
+
+ return xenon_add_phy(dev, host, "emmc 5.1 phy");
+}