diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/net/dsa/b53/b53_serdes.c | 249 |
1 files changed, 249 insertions, 0 deletions
diff --git a/drivers/net/dsa/b53/b53_serdes.c b/drivers/net/dsa/b53/b53_serdes.c new file mode 100644 index 000000000..069021077 --- /dev/null +++ b/drivers/net/dsa/b53/b53_serdes.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause +/* + * Northstar Plus switch SerDes/SGMII PHY main logic + * + * Copyright (C) 2018 Florian Fainelli <f.fainelli@gmail.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/phy.h> +#include <linux/phylink.h> +#include <net/dsa.h> + +#include "b53_priv.h" +#include "b53_serdes.h" +#include "b53_regs.h" + +static inline struct b53_pcs *pcs_to_b53_pcs(struct phylink_pcs *pcs) +{ + return container_of(pcs, struct b53_pcs, pcs); +} + +static void b53_serdes_write_blk(struct b53_device *dev, u8 offset, u16 block, + u16 value) +{ + b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block); + b53_write16(dev, B53_SERDES_PAGE, offset, value); +} + +static u16 b53_serdes_read_blk(struct b53_device *dev, u8 offset, u16 block) +{ + u16 value; + + b53_write16(dev, B53_SERDES_PAGE, B53_SERDES_BLKADDR, block); + b53_read16(dev, B53_SERDES_PAGE, offset, &value); + + return value; +} + +static void b53_serdes_set_lane(struct b53_device *dev, u8 lane) +{ + if (dev->serdes_lane == lane) + return; + + WARN_ON(lane > 1); + + b53_serdes_write_blk(dev, B53_SERDES_LANE, + SERDES_XGXSBLK0_BLOCKADDRESS, lane); + dev->serdes_lane = lane; +} + +static void b53_serdes_write(struct b53_device *dev, u8 lane, + u8 offset, u16 block, u16 value) +{ + b53_serdes_set_lane(dev, lane); + b53_serdes_write_blk(dev, offset, block, value); +} + +static u16 b53_serdes_read(struct b53_device *dev, u8 lane, + u8 offset, u16 block) +{ + b53_serdes_set_lane(dev, lane); + return b53_serdes_read_blk(dev, offset, block); +} + +static int b53_serdes_config(struct phylink_pcs *pcs, unsigned int mode, + phy_interface_t interface, + const unsigned long *advertising, + bool permit_pause_to_mac) +{ + struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev; + u8 lane = pcs_to_b53_pcs(pcs)->lane; + u16 reg; + + reg = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_CONTROL(1), + SERDES_DIGITAL_BLK); + if (interface == PHY_INTERFACE_MODE_1000BASEX) + reg |= FIBER_MODE_1000X; + else + reg &= ~FIBER_MODE_1000X; + b53_serdes_write(dev, lane, B53_SERDES_DIGITAL_CONTROL(1), + SERDES_DIGITAL_BLK, reg); + + return 0; +} + +static void b53_serdes_an_restart(struct phylink_pcs *pcs) +{ + struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev; + u8 lane = pcs_to_b53_pcs(pcs)->lane; + u16 reg; + + reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR), + SERDES_MII_BLK); + reg |= BMCR_ANRESTART; + b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR), + SERDES_MII_BLK, reg); +} + +static void b53_serdes_get_state(struct phylink_pcs *pcs, + struct phylink_link_state *state) +{ + struct b53_device *dev = pcs_to_b53_pcs(pcs)->dev; + u8 lane = pcs_to_b53_pcs(pcs)->lane; + u16 dig, bmsr; + + dig = b53_serdes_read(dev, lane, B53_SERDES_DIGITAL_STATUS, + SERDES_DIGITAL_BLK); + bmsr = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMSR), + SERDES_MII_BLK); + + switch ((dig >> SPEED_STATUS_SHIFT) & SPEED_STATUS_MASK) { + case SPEED_STATUS_10: + state->speed = SPEED_10; + break; + case SPEED_STATUS_100: + state->speed = SPEED_100; + break; + case SPEED_STATUS_1000: + state->speed = SPEED_1000; + break; + default: + case SPEED_STATUS_2500: + state->speed = SPEED_2500; + break; + } + + state->duplex = dig & DUPLEX_STATUS ? DUPLEX_FULL : DUPLEX_HALF; + state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE); + state->link = !!(dig & LINK_STATUS); + if (dig & PAUSE_RESOLUTION_RX_SIDE) + state->pause |= MLO_PAUSE_RX; + if (dig & PAUSE_RESOLUTION_TX_SIDE) + state->pause |= MLO_PAUSE_TX; +} + +void b53_serdes_link_set(struct b53_device *dev, int port, unsigned int mode, + phy_interface_t interface, bool link_up) +{ + u8 lane = b53_serdes_map_lane(dev, port); + u16 reg; + + if (lane == B53_INVALID_LANE) + return; + + reg = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_BMCR), + SERDES_MII_BLK); + if (link_up) + reg &= ~BMCR_PDOWN; + else + reg |= BMCR_PDOWN; + b53_serdes_write(dev, lane, B53_SERDES_MII_REG(MII_BMCR), + SERDES_MII_BLK, reg); +} +EXPORT_SYMBOL(b53_serdes_link_set); + +static const struct phylink_pcs_ops b53_pcs_ops = { + .pcs_get_state = b53_serdes_get_state, + .pcs_config = b53_serdes_config, + .pcs_an_restart = b53_serdes_an_restart, +}; + +void b53_serdes_phylink_get_caps(struct b53_device *dev, int port, + struct phylink_config *config) +{ + u8 lane = b53_serdes_map_lane(dev, port); + + if (lane == B53_INVALID_LANE) + return; + + switch (lane) { + case 0: + /* It appears lane 0 supports 2500base-X and 1000base-X */ + __set_bit(PHY_INTERFACE_MODE_2500BASEX, + config->supported_interfaces); + config->mac_capabilities |= MAC_2500FD; + fallthrough; + case 1: + /* It appears lane 1 only supports 1000base-X and SGMII */ + __set_bit(PHY_INTERFACE_MODE_1000BASEX, + config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, + config->supported_interfaces); + config->mac_capabilities |= MAC_1000FD; + break; + default: + break; + } +} +EXPORT_SYMBOL(b53_serdes_phylink_get_caps); + +struct phylink_pcs *b53_serdes_phylink_mac_select_pcs(struct b53_device *dev, + int port, + phy_interface_t interface) +{ + u8 lane = b53_serdes_map_lane(dev, port); + + if (lane == B53_INVALID_LANE || lane >= B53_N_PCS || + !dev->pcs[lane].dev) + return NULL; + + if (!phy_interface_mode_is_8023z(interface) && + interface != PHY_INTERFACE_MODE_SGMII) + return NULL; + + return &dev->pcs[lane].pcs; +} +EXPORT_SYMBOL(b53_serdes_phylink_mac_select_pcs); + +int b53_serdes_init(struct b53_device *dev, int port) +{ + u8 lane = b53_serdes_map_lane(dev, port); + struct b53_pcs *pcs; + u16 id0, msb, lsb; + + if (lane == B53_INVALID_LANE) + return -EINVAL; + + id0 = b53_serdes_read(dev, lane, B53_SERDES_ID0, SERDES_ID0); + msb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID1), + SERDES_MII_BLK); + lsb = b53_serdes_read(dev, lane, B53_SERDES_MII_REG(MII_PHYSID2), + SERDES_MII_BLK); + if (id0 == 0 || id0 == 0xffff) { + dev_err(dev->dev, "SerDes not initialized, check settings\n"); + return -ENODEV; + } + + dev_info(dev->dev, + "SerDes lane %d, model: %d, rev %c%d (OUI: 0x%08x)\n", + lane, id0 & SERDES_ID0_MODEL_MASK, + (id0 >> SERDES_ID0_REV_LETTER_SHIFT) + 0x41, + (id0 >> SERDES_ID0_REV_NUM_SHIFT) & SERDES_ID0_REV_NUM_MASK, + (u32)msb << 16 | lsb); + + pcs = &dev->pcs[lane]; + pcs->dev = dev; + pcs->lane = lane; + pcs->pcs.ops = &b53_pcs_ops; + + return 0; +} +EXPORT_SYMBOL(b53_serdes_init); + +MODULE_AUTHOR("Florian Fainelli <f.fainelli@gmail.com>"); +MODULE_DESCRIPTION("B53 Switch SerDes driver"); +MODULE_LICENSE("Dual BSD/GPL"); |