summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40e
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/i40e')
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e.h6
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c14
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_ptp.c6
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_register.h3
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_txrx.c82
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_txrx.h5
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c45
7 files changed, 108 insertions, 53 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 7d4cc4eaf..5293fc009 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -108,7 +108,7 @@
#define I40E_MAX_BW_INACTIVE_ACCUM 4 /* accumulate 4 credits max */
/* driver state flags */
-enum i40e_state_t {
+enum i40e_state {
__I40E_TESTING,
__I40E_CONFIG_BUSY,
__I40E_CONFIG_DONE,
@@ -156,7 +156,7 @@ enum i40e_state_t {
BIT_ULL(__I40E_PF_RESET_AND_REBUILD_REQUESTED)
/* VSI state flags */
-enum i40e_vsi_state_t {
+enum i40e_vsi_state {
__I40E_VSI_DOWN,
__I40E_VSI_NEEDS_RESTART,
__I40E_VSI_SYNCING_FILTERS,
@@ -992,6 +992,8 @@ struct i40e_q_vector {
struct rcu_head rcu; /* to avoid race with update stats on free */
char name[I40E_INT_NAME_STR_LEN];
bool arm_wb_state;
+ bool in_busy_poll;
+ int irq_num; /* IRQ assigned to this q_vector */
} ____cacheline_internodealigned_in_smp;
/* lan device */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index d8a7fb21b..a9db1ed74 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1249,8 +1249,11 @@ int i40e_count_filters(struct i40e_vsi *vsi)
int bkt;
int cnt = 0;
- hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist)
- ++cnt;
+ hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) {
+ if (f->state == I40E_FILTER_NEW ||
+ f->state == I40E_FILTER_ACTIVE)
+ ++cnt;
+ }
return cnt;
}
@@ -3888,6 +3891,12 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
q_vector->tx.target_itr >> 1);
q_vector->tx.current_itr = q_vector->tx.target_itr;
+ /* Set ITR for software interrupts triggered after exiting
+ * busy-loop polling.
+ */
+ wr32(hw, I40E_PFINT_ITRN(I40E_SW_ITR, vector - 1),
+ I40E_ITR_20K);
+
wr32(hw, I40E_PFINT_RATEN(vector - 1),
i40e_intrl_usec_to_reg(vsi->int_rate_limit));
@@ -4142,6 +4151,7 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename)
}
/* register for affinity change notifications */
+ q_vector->irq_num = irq_num;
q_vector->affinity_notify.notify = i40e_irq_affinity_notify;
q_vector->affinity_notify.release = i40e_irq_affinity_release;
irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
index 97a9efe7b..5f2555848 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
@@ -34,7 +34,7 @@ enum i40e_ptp_pin {
GPIO_4
};
-enum i40e_can_set_pins_t {
+enum i40e_can_set_pins {
CANT_DO_PINS = -1,
CAN_SET_PINS,
CAN_DO_PINS
@@ -192,7 +192,7 @@ static bool i40e_is_ptp_pin_dev(struct i40e_hw *hw)
* return CAN_DO_PINS if pins can be manipulated within a NIC or
* return CANT_DO_PINS otherwise.
**/
-static enum i40e_can_set_pins_t i40e_can_set_pins(struct i40e_pf *pf)
+static enum i40e_can_set_pins i40e_can_set_pins(struct i40e_pf *pf)
{
if (!i40e_is_ptp_pin_dev(&pf->hw)) {
dev_warn(&pf->pdev->dev,
@@ -1081,7 +1081,7 @@ static void i40e_ptp_set_pins_hw(struct i40e_pf *pf)
static int i40e_ptp_set_pins(struct i40e_pf *pf,
struct i40e_ptp_pins_settings *pins)
{
- enum i40e_can_set_pins_t pin_caps = i40e_can_set_pins(pf);
+ enum i40e_can_set_pins pin_caps = i40e_can_set_pins(pf);
int i = 0;
if (pin_caps == CANT_DO_PINS)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h
index 7339003aa..694cb3e45 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_register.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_register.h
@@ -328,8 +328,11 @@
#define I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT 3
#define I40E_PFINT_DYN_CTLN_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT)
#define I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT 5
+#define I40E_PFINT_DYN_CTLN_INTERVAL_MASK I40E_MASK(0xFFF, I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT)
#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT 24
#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK I40E_MASK(0x1, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT)
+#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT 25
+#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT)
#define I40E_PFINT_ICR0 0x00038780 /* Reset: CORER */
#define I40E_PFINT_ICR0_INTEVENT_SHIFT 0
#define I40E_PFINT_ICR0_INTEVENT_MASK I40E_MASK(0x1, I40E_PFINT_ICR0_INTEVENT_SHIFT)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 94cf82668..3d83fccf7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2571,7 +2571,22 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
return failure ? budget : (int)total_rx_packets;
}
-static inline u32 i40e_buildreg_itr(const int type, u16 itr)
+/**
+ * i40e_buildreg_itr - build a value for writing to I40E_PFINT_DYN_CTLN register
+ * @itr_idx: interrupt throttling index
+ * @interval: interrupt throttling interval value in usecs
+ * @force_swint: force software interrupt
+ *
+ * The function builds a value for I40E_PFINT_DYN_CTLN register that
+ * is used to update interrupt throttling interval for specified ITR index
+ * and optionally enforces a software interrupt. If the @itr_idx is equal
+ * to I40E_ITR_NONE then no interval change is applied and only @force_swint
+ * parameter is taken into account. If the interval change and enforced
+ * software interrupt are not requested then the built value just enables
+ * appropriate vector interrupt.
+ **/
+static u32 i40e_buildreg_itr(enum i40e_dyn_idx itr_idx, u16 interval,
+ bool force_swint)
{
u32 val;
@@ -2585,23 +2600,33 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr)
* an event in the PBA anyway so we need to rely on the automask
* to hold pending events for us until the interrupt is re-enabled
*
- * The itr value is reported in microseconds, and the register
- * value is recorded in 2 microsecond units. For this reason we
- * only need to shift by the interval shift - 1 instead of the
- * full value.
+ * We have to shift the given value as it is reported in microseconds
+ * and the register value is recorded in 2 microsecond units.
*/
- itr &= I40E_ITR_MASK;
+ interval >>= 1;
+ /* 1. Enable vector interrupt
+ * 2. Update the interval for the specified ITR index
+ * (I40E_ITR_NONE in the register is used to indicate that
+ * no interval update is requested)
+ */
val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
- (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) |
- (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1));
+ FIELD_PREP(I40E_PFINT_DYN_CTLN_ITR_INDX_MASK, itr_idx) |
+ FIELD_PREP(I40E_PFINT_DYN_CTLN_INTERVAL_MASK, interval);
+
+ /* 3. Enforce software interrupt trigger if requested
+ * (These software interrupts rate is limited by ITR2 that is
+ * set to 20K interrupts per second)
+ */
+ if (force_swint)
+ val |= I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK |
+ I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK |
+ FIELD_PREP(I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK,
+ I40E_SW_ITR);
return val;
}
-/* a small macro to shorten up some long lines */
-#define INTREG I40E_PFINT_DYN_CTLN
-
/* The act of updating the ITR will cause it to immediately trigger. In order
* to prevent this from throwing off adaptive update statistics we defer the
* update so that it can only happen so often. So after either Tx or Rx are
@@ -2620,8 +2645,10 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr)
static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
struct i40e_q_vector *q_vector)
{
+ enum i40e_dyn_idx itr_idx = I40E_ITR_NONE;
struct i40e_hw *hw = &vsi->back->hw;
- u32 intval;
+ u16 interval = 0;
+ u32 itr_val;
/* If we don't have MSIX, then we only need to re-enable icr0 */
if (!(vsi->back->flags & I40E_FLAG_MSIX_ENABLED)) {
@@ -2643,8 +2670,8 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
*/
if (q_vector->rx.target_itr < q_vector->rx.current_itr) {
/* Rx ITR needs to be reduced, this is highest priority */
- intval = i40e_buildreg_itr(I40E_RX_ITR,
- q_vector->rx.target_itr);
+ itr_idx = I40E_RX_ITR;
+ interval = q_vector->rx.target_itr;
q_vector->rx.current_itr = q_vector->rx.target_itr;
q_vector->itr_countdown = ITR_COUNTDOWN_START;
} else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) ||
@@ -2653,25 +2680,36 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
/* Tx ITR needs to be reduced, this is second priority
* Tx ITR needs to be increased more than Rx, fourth priority
*/
- intval = i40e_buildreg_itr(I40E_TX_ITR,
- q_vector->tx.target_itr);
+ itr_idx = I40E_TX_ITR;
+ interval = q_vector->tx.target_itr;
q_vector->tx.current_itr = q_vector->tx.target_itr;
q_vector->itr_countdown = ITR_COUNTDOWN_START;
} else if (q_vector->rx.current_itr != q_vector->rx.target_itr) {
/* Rx ITR needs to be increased, third priority */
- intval = i40e_buildreg_itr(I40E_RX_ITR,
- q_vector->rx.target_itr);
+ itr_idx = I40E_RX_ITR;
+ interval = q_vector->rx.target_itr;
q_vector->rx.current_itr = q_vector->rx.target_itr;
q_vector->itr_countdown = ITR_COUNTDOWN_START;
} else {
/* No ITR update, lowest priority */
- intval = i40e_buildreg_itr(I40E_ITR_NONE, 0);
if (q_vector->itr_countdown)
q_vector->itr_countdown--;
}
- if (!test_bit(__I40E_VSI_DOWN, vsi->state))
- wr32(hw, INTREG(q_vector->reg_idx), intval);
+ /* Do not update interrupt control register if VSI is down */
+ if (test_bit(__I40E_VSI_DOWN, vsi->state))
+ return;
+
+ /* Update ITR interval if necessary and enforce software interrupt
+ * if we are exiting busy poll.
+ */
+ if (q_vector->in_busy_poll) {
+ itr_val = i40e_buildreg_itr(itr_idx, interval, true);
+ q_vector->in_busy_poll = false;
+ } else {
+ itr_val = i40e_buildreg_itr(itr_idx, interval, false);
+ }
+ wr32(hw, I40E_PFINT_DYN_CTLN(q_vector->reg_idx), itr_val);
}
/**
@@ -2778,6 +2816,8 @@ tx_only:
*/
if (likely(napi_complete_done(napi, work_done)))
i40e_update_enable_itr(vsi, q_vector);
+ else
+ q_vector->in_busy_poll = true;
return min(work_done, budget - 1);
}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index 768290dc6..6e567d343 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -57,7 +57,7 @@ static inline u16 i40e_intrl_usec_to_reg(int intrl)
* mentioning ITR_INDX, ITR_NONE cannot be used as an index 'n' into any
* register but instead is a special value meaning "don't update" ITR0/1/2.
*/
-enum i40e_dyn_idx_t {
+enum i40e_dyn_idx {
I40E_IDX_ITR0 = 0,
I40E_IDX_ITR1 = 1,
I40E_IDX_ITR2 = 2,
@@ -67,6 +67,7 @@ enum i40e_dyn_idx_t {
/* these are indexes into ITRN registers */
#define I40E_RX_ITR I40E_IDX_ITR0
#define I40E_TX_ITR I40E_IDX_ITR1
+#define I40E_SW_ITR I40E_IDX_ITR2
/* Supported RSS offloads */
#define I40E_DEFAULT_RSS_HENA ( \
@@ -304,7 +305,7 @@ struct i40e_rx_queue_stats {
u64 page_busy_count;
};
-enum i40e_ring_state_t {
+enum i40e_ring_state {
__I40E_TX_FDIR_INIT_DONE,
__I40E_TX_XPS_INIT_DONE,
__I40E_RING_STATE_NBITS /* must be last */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index ed4be80fe..a5f0c95cb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1626,8 +1626,8 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
{
struct i40e_hw *hw = &pf->hw;
struct i40e_vf *vf;
- int i, v;
u32 reg;
+ int i;
/* If we don't have any VFs, then there is nothing to reset */
if (!pf->num_alloc_vfs)
@@ -1638,11 +1638,10 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
return false;
/* Begin reset on all VFs at once */
- for (v = 0; v < pf->num_alloc_vfs; v++) {
- vf = &pf->vf[v];
+ for (vf = &pf->vf[0]; vf < &pf->vf[pf->num_alloc_vfs]; ++vf) {
/* If VF is being reset no need to trigger reset again */
if (!test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
- i40e_trigger_vf_reset(&pf->vf[v], flr);
+ i40e_trigger_vf_reset(vf, flr);
}
/* HW requires some time to make sure it can flush the FIFO for a VF
@@ -1651,14 +1650,13 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
* the VFs using a simple iterator that increments once that VF has
* finished resetting.
*/
- for (i = 0, v = 0; i < 10 && v < pf->num_alloc_vfs; i++) {
+ for (i = 0, vf = &pf->vf[0]; i < 10 && vf < &pf->vf[pf->num_alloc_vfs]; ++i) {
usleep_range(10000, 20000);
/* Check each VF in sequence, beginning with the VF to fail
* the previous check.
*/
- while (v < pf->num_alloc_vfs) {
- vf = &pf->vf[v];
+ while (vf < &pf->vf[pf->num_alloc_vfs]) {
if (!test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states)) {
reg = rd32(hw, I40E_VPGEN_VFRSTAT(vf->vf_id));
if (!(reg & I40E_VPGEN_VFRSTAT_VFRD_MASK))
@@ -1668,7 +1666,7 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
/* If the current VF has finished resetting, move on
* to the next VF in sequence.
*/
- v++;
+ ++vf;
}
}
@@ -1678,39 +1676,39 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
/* Display a warning if at least one VF didn't manage to reset in
* time, but continue on with the operation.
*/
- if (v < pf->num_alloc_vfs)
+ if (vf < &pf->vf[pf->num_alloc_vfs])
dev_err(&pf->pdev->dev, "VF reset check timeout on VF %d\n",
- pf->vf[v].vf_id);
+ vf->vf_id);
usleep_range(10000, 20000);
/* Begin disabling all the rings associated with VFs, but do not wait
* between each VF.
*/
- for (v = 0; v < pf->num_alloc_vfs; v++) {
+ for (vf = &pf->vf[0]; vf < &pf->vf[pf->num_alloc_vfs]; ++vf) {
/* On initial reset, we don't have any queues to disable */
- if (pf->vf[v].lan_vsi_idx == 0)
+ if (vf->lan_vsi_idx == 0)
continue;
/* If VF is reset in another thread just continue */
if (test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
continue;
- i40e_vsi_stop_rings_no_wait(pf->vsi[pf->vf[v].lan_vsi_idx]);
+ i40e_vsi_stop_rings_no_wait(pf->vsi[vf->lan_vsi_idx]);
}
/* Now that we've notified HW to disable all of the VF rings, wait
* until they finish.
*/
- for (v = 0; v < pf->num_alloc_vfs; v++) {
+ for (vf = &pf->vf[0]; vf < &pf->vf[pf->num_alloc_vfs]; ++vf) {
/* On initial reset, we don't have any queues to disable */
- if (pf->vf[v].lan_vsi_idx == 0)
+ if (vf->lan_vsi_idx == 0)
continue;
/* If VF is reset in another thread just continue */
if (test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
continue;
- i40e_vsi_wait_queues_disabled(pf->vsi[pf->vf[v].lan_vsi_idx]);
+ i40e_vsi_wait_queues_disabled(pf->vsi[vf->lan_vsi_idx]);
}
/* Hw may need up to 50ms to finish disabling the RX queues. We
@@ -1719,12 +1717,12 @@ bool i40e_reset_all_vfs(struct i40e_pf *pf, bool flr)
mdelay(50);
/* Finish the reset on each VF */
- for (v = 0; v < pf->num_alloc_vfs; v++) {
+ for (vf = &pf->vf[0]; vf < &pf->vf[pf->num_alloc_vfs]; ++vf) {
/* If VF is reset in another thread just continue */
if (test_bit(I40E_VF_STATE_RESETTING, &vf->vf_states))
continue;
- i40e_cleanup_reset_vf(&pf->vf[v]);
+ i40e_cleanup_reset_vf(vf);
}
i40e_flush(hw);
@@ -3078,11 +3076,12 @@ static int i40e_vc_del_mac_addr_msg(struct i40e_vf *vf, u8 *msg)
/* Allow to delete VF primary MAC only if it was not set
* administratively by PF or if VF is trusted.
*/
- if (ether_addr_equal(addr, vf->default_lan_addr.addr) &&
- i40e_can_vf_change_mac(vf))
- was_unimac_deleted = true;
- else
- continue;
+ if (ether_addr_equal(addr, vf->default_lan_addr.addr)) {
+ if (i40e_can_vf_change_mac(vf))
+ was_unimac_deleted = true;
+ else
+ continue;
+ }
if (i40e_del_mac_filter(vsi, al->list[i].addr)) {
ret = I40E_ERR_INVALID_MAC_ADDR;