diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 277 |
1 files changed, 277 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig new file mode 100644 index 000000000..58091ee2b --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -0,0 +1,277 @@ +# SPDX-License-Identifier: GPL-2.0-only +config STMMAC_ETH + tristate "STMicroelectronics Multi-Gigabit Ethernet driver" + depends on HAS_IOMEM && HAS_DMA + depends on PTP_1588_CLOCK_OPTIONAL + select MII + select PCS_XPCS + select PAGE_POOL + select PHYLINK + select CRC32 + select RESET_CONTROLLER + help + This is the driver for the Ethernet IPs built around a + Synopsys IP Core. + +if STMMAC_ETH + +config STMMAC_SELFTESTS + bool "Support for STMMAC Selftests" + depends on INET + depends on STMMAC_ETH + default n + help + This adds support for STMMAC Selftests using ethtool. Enable this + feature if you are facing problems with your HW and submit the test + results to the netdev Mailing List. + +config STMMAC_PLATFORM + tristate "STMMAC Platform bus support" + depends on STMMAC_ETH + select MFD_SYSCON + default y + help + This selects the platform specific bus support for the stmmac driver. + This is the driver used on several SoCs: + STi, Allwinner, Amlogic Meson, Altera SOCFPGA. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + +if STMMAC_PLATFORM + +config DWMAC_DWC_QOS_ETH + tristate "Support for snps,dwc-qos-ethernet.txt DT binding." + select CRC32 + select MII + depends on OF && HAS_DMA + help + Support for chips using the snps,dwc-qos-ethernet.txt DT binding. + +config DWMAC_GENERIC + tristate "Generic driver for DWMAC" + default STMMAC_PLATFORM + help + Generic DWMAC driver for platforms that don't require any + platform specific code to function or is using platform + data for setup. + +config DWMAC_ANARION + tristate "Adaptrum Anarion GMAC support" + default ARC + depends on OF && (ARC || COMPILE_TEST) + help + Support for Adaptrum Anarion GMAC Ethernet controller. + + This selects the Anarion SoC glue layer support for the stmmac driver. + +config DWMAC_INGENIC + tristate "Ingenic MAC support" + default MACH_INGENIC + depends on OF && HAS_IOMEM && (MACH_INGENIC || COMPILE_TEST) + select MFD_SYSCON + help + Support for ethernet controller on Ingenic SoCs. + + This selects Ingenic SoCs glue layer support for the stmmac + device driver. This driver is used on for the Ingenic SoCs + MAC ethernet controller. + +config DWMAC_IPQ806X + tristate "QCA IPQ806x DWMAC support" + default ARCH_QCOM + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select MFD_SYSCON + help + Support for QCA IPQ806X DWMAC Ethernet. + + This selects the IPQ806x SoC glue layer support for the stmmac + device driver. This driver does not use any of the hardware + acceleration features available on this SoC. Network devices + will behave like standard non-accelerated ethernet interfaces. + + Select the QCOM_SOCINFO config flag to enable specific dwmac + fixup based on the ipq806x SoC revision. + +config DWMAC_LPC18XX + tristate "NXP LPC18xx/43xx DWMAC support" + default ARCH_LPC18XX + depends on OF && (ARCH_LPC18XX || COMPILE_TEST) + select MFD_SYSCON + help + Support for NXP LPC18xx/43xx DWMAC Ethernet. + +config DWMAC_MEDIATEK + tristate "MediaTek MT27xx GMAC support" + depends on OF && (ARCH_MEDIATEK || COMPILE_TEST) + help + Support for MediaTek GMAC Ethernet controller. + + This selects the MT2712 SoC support for the stmmac driver. + +config DWMAC_MESON + tristate "Amlogic Meson dwmac support" + default ARCH_MESON + depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) + help + Support for Ethernet controller on Amlogic Meson SoCs. + + This selects the Amlogic Meson SoC glue layer support for + the stmmac device driver. This driver is used for Meson6, + Meson8, Meson8b and GXBB SoCs. + +config DWMAC_OXNAS + tristate "Oxford Semiconductor OXNAS dwmac support" + default ARCH_OXNAS + depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST) + select MFD_SYSCON + help + Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs. + + This selects the Oxford Semiconductor OXNASSoC glue layer support for + the stmmac device driver. This driver is used for OX820. + +config DWMAC_QCOM_ETHQOS + tristate "Qualcomm ETHQOS support" + default ARCH_QCOM + depends on OF && (ARCH_QCOM || COMPILE_TEST) + help + Support for the Qualcomm ETHQOS core. + + This selects the Qualcomm ETHQOS glue layer support for the + stmmac device driver. + +config DWMAC_ROCKCHIP + tristate "Rockchip dwmac support" + default ARCH_ROCKCHIP + depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) + select MFD_SYSCON + help + Support for Ethernet controller on Rockchip RK3288 SoC. + + This selects the Rockchip RK3288 SoC glue layer support for + the stmmac device driver. + +config DWMAC_SOCFPGA + tristate "SOCFPGA dwmac support" + default ARCH_INTEL_SOCFPGA + depends on OF && (ARCH_INTEL_SOCFPGA || COMPILE_TEST) + select MFD_SYSCON + help + Support for ethernet controller on Altera SOCFPGA + + This selects the Altera SOCFPGA SoC glue layer support + for the stmmac device driver. This driver is used for + arria5 and cyclone5 FPGA SoCs. + +config DWMAC_STI + tristate "STi GMAC support" + default ARCH_STI + depends on OF && (ARCH_STI || COMPILE_TEST) + select MFD_SYSCON + help + Support for ethernet controller on STi SOCs. + + This selects STi SoC glue layer support for the stmmac + device driver. This driver is used on for the STi series + SOCs GMAC ethernet controller. + +config DWMAC_STM32 + tristate "STM32 DWMAC support" + default ARCH_STM32 + depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST) + select MFD_SYSCON + help + Support for ethernet controller on STM32 SOCs. + + This selects STM32 SoC glue layer support for the stmmac + device driver. This driver is used on for the STM32 series + SOCs GMAC ethernet controller. + +config DWMAC_SUNXI + tristate "Allwinner GMAC support" + default ARCH_SUNXI + depends on OF && (ARCH_SUNXI || COMPILE_TEST) + help + Support for Allwinner A20/A31 GMAC ethernet controllers. + + This selects Allwinner SoC glue layer support for the + stmmac device driver. This driver is used for A20/A31 + GMAC ethernet controller. + +config DWMAC_SUN8I + tristate "Allwinner sun8i GMAC support" + default ARCH_SUNXI + depends on OF && (ARCH_SUNXI || COMPILE_TEST) + select MDIO_BUS_MUX + help + Support for Allwinner H3 A83T A64 EMAC ethernet controllers. + + This selects Allwinner SoC glue layer support for the + stmmac device driver. This driver is used for H3/A83T/A64 + EMAC ethernet controller. + +config DWMAC_IMX8 + tristate "NXP IMX8 DWMAC support" + default ARCH_MXC + depends on OF && (ARCH_MXC || COMPILE_TEST) + select MFD_SYSCON + help + Support for ethernet controller on NXP i.MX8 SOCs. + + This selects NXP SoC glue layer support for the stmmac + device driver. This driver is used for i.MX8 series like + iMX8MP/iMX8DXL GMAC ethernet controller. + +config DWMAC_INTEL_PLAT + tristate "Intel dwmac support" + depends on OF && COMMON_CLK + depends on STMMAC_ETH + help + Support for ethernet controllers on Intel SoCs + + This selects the Intel platform specific glue layer support for + the stmmac device driver. This driver is used for the Intel Keem Bay + SoC. + +config DWMAC_VISCONTI + tristate "Toshiba Visconti DWMAC support" + default ARCH_VISCONTI + depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST) + help + Support for ethernet controller on Visconti SoCs. + +endif + +config DWMAC_INTEL + tristate "Intel GMAC support" + default X86 + depends on X86 && STMMAC_ETH && PCI + depends on COMMON_CLK + help + This selects the Intel platform specific bus support for the + stmmac driver. This driver is used for Intel Quark/EHL/TGL. + +config DWMAC_LOONGSON + tristate "Loongson PCI DWMAC support" + default MACH_LOONGSON64 + depends on (MACH_LOONGSON64 || COMPILE_TEST) && STMMAC_ETH && PCI + depends on COMMON_CLK + help + This selects the LOONGSON PCI bus support for the stmmac driver, + Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge. + +config STMMAC_PCI + tristate "STMMAC PCI bus support" + depends on STMMAC_ETH && PCI + depends on COMMON_CLK + help + This selects the platform specific bus support for the stmmac driver. + This driver was tested on XLINX XC2V3000 FF1152AMT0221 + D1215994A VIRTEX FPGA board and SNPS QoS IPK Prototyping Kit. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. +endif |