diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 1241 |
1 files changed, 1241 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c new file mode 100644 index 000000000..ab9f876b6 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c @@ -0,0 +1,1241 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2020, Intel Corporation + */ + +#include <linux/clk-provider.h> +#include <linux/pci.h> +#include <linux/dmi.h> +#include "dwmac-intel.h" +#include "dwmac4.h" +#include "stmmac.h" +#include "stmmac_ptp.h" + +struct intel_priv_data { + int mdio_adhoc_addr; /* mdio address for serdes & etc */ + unsigned long crossts_adj; + bool is_pse; +}; + +/* This struct is used to associate PCI Function of MAC controller on a board, + * discovered via DMI, with the address of PHY connected to the MAC. The + * negative value of the address means that MAC controller is not connected + * with PHY. + */ +struct stmmac_pci_func_data { + unsigned int func; + int phy_addr; +}; + +struct stmmac_pci_dmi_data { + const struct stmmac_pci_func_data *func; + size_t nfuncs; +}; + +struct stmmac_pci_info { + int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat); +}; + +static int stmmac_pci_find_phy_addr(struct pci_dev *pdev, + const struct dmi_system_id *dmi_list) +{ + const struct stmmac_pci_func_data *func_data; + const struct stmmac_pci_dmi_data *dmi_data; + const struct dmi_system_id *dmi_id; + int func = PCI_FUNC(pdev->devfn); + size_t n; + + dmi_id = dmi_first_match(dmi_list); + if (!dmi_id) + return -ENODEV; + + dmi_data = dmi_id->driver_data; + func_data = dmi_data->func; + + for (n = 0; n < dmi_data->nfuncs; n++, func_data++) + if (func_data->func == func) + return func_data->phy_addr; + + return -ENODEV; +} + +static int serdes_status_poll(struct stmmac_priv *priv, int phyaddr, + int phyreg, u32 mask, u32 val) +{ + unsigned int retries = 10; + int val_rd; + + do { + val_rd = mdiobus_read(priv->mii, phyaddr, phyreg); + if ((val_rd & mask) == (val & mask)) + return 0; + udelay(POLL_DELAY_US); + } while (--retries); + + return -ETIMEDOUT; +} + +static int intel_serdes_powerup(struct net_device *ndev, void *priv_data) +{ + struct intel_priv_data *intel_priv = priv_data; + struct stmmac_priv *priv = netdev_priv(ndev); + int serdes_phy_addr = 0; + u32 data = 0; + + if (!intel_priv->mdio_adhoc_addr) + return 0; + + serdes_phy_addr = intel_priv->mdio_adhoc_addr; + + /* Set the serdes rate and the PCLK rate */ + data = mdiobus_read(priv->mii, serdes_phy_addr, + SERDES_GCR0); + + data &= ~SERDES_RATE_MASK; + data &= ~SERDES_PCLK_MASK; + + if (priv->plat->max_speed == 2500) + data |= SERDES_RATE_PCIE_GEN2 << SERDES_RATE_PCIE_SHIFT | + SERDES_PCLK_37p5MHZ << SERDES_PCLK_SHIFT; + else + data |= SERDES_RATE_PCIE_GEN1 << SERDES_RATE_PCIE_SHIFT | + SERDES_PCLK_70MHZ << SERDES_PCLK_SHIFT; + + mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); + + /* assert clk_req */ + data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); + data |= SERDES_PLL_CLK; + mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); + + /* check for clk_ack assertion */ + data = serdes_status_poll(priv, serdes_phy_addr, + SERDES_GSR0, + SERDES_PLL_CLK, + SERDES_PLL_CLK); + + if (data) { + dev_err(priv->device, "Serdes PLL clk request timeout\n"); + return data; + } + + /* assert lane reset */ + data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); + data |= SERDES_RST; + mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); + + /* check for assert lane reset reflection */ + data = serdes_status_poll(priv, serdes_phy_addr, + SERDES_GSR0, + SERDES_RST, + SERDES_RST); + + if (data) { + dev_err(priv->device, "Serdes assert lane reset timeout\n"); + return data; + } + + /* move power state to P0 */ + data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); + + data &= ~SERDES_PWR_ST_MASK; + data |= SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT; + + mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); + + /* Check for P0 state */ + data = serdes_status_poll(priv, serdes_phy_addr, + SERDES_GSR0, + SERDES_PWR_ST_MASK, + SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT); + + if (data) { + dev_err(priv->device, "Serdes power state P0 timeout.\n"); + return data; + } + + /* PSE only - ungate SGMII PHY Rx Clock */ + if (intel_priv->is_pse) + mdiobus_modify(priv->mii, serdes_phy_addr, SERDES_GCR0, + 0, SERDES_PHY_RX_CLK); + + return 0; +} + +static void intel_serdes_powerdown(struct net_device *ndev, void *intel_data) +{ + struct intel_priv_data *intel_priv = intel_data; + struct stmmac_priv *priv = netdev_priv(ndev); + int serdes_phy_addr = 0; + u32 data = 0; + + if (!intel_priv->mdio_adhoc_addr) + return; + + serdes_phy_addr = intel_priv->mdio_adhoc_addr; + + /* PSE only - gate SGMII PHY Rx Clock */ + if (intel_priv->is_pse) + mdiobus_modify(priv->mii, serdes_phy_addr, SERDES_GCR0, + SERDES_PHY_RX_CLK, 0); + + /* move power state to P3 */ + data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); + + data &= ~SERDES_PWR_ST_MASK; + data |= SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT; + + mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); + + /* Check for P3 state */ + data = serdes_status_poll(priv, serdes_phy_addr, + SERDES_GSR0, + SERDES_PWR_ST_MASK, + SERDES_PWR_ST_P3 << SERDES_PWR_ST_SHIFT); + + if (data) { + dev_err(priv->device, "Serdes power state P3 timeout\n"); + return; + } + + /* de-assert clk_req */ + data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); + data &= ~SERDES_PLL_CLK; + mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); + + /* check for clk_ack de-assert */ + data = serdes_status_poll(priv, serdes_phy_addr, + SERDES_GSR0, + SERDES_PLL_CLK, + (u32)~SERDES_PLL_CLK); + + if (data) { + dev_err(priv->device, "Serdes PLL clk de-assert timeout\n"); + return; + } + + /* de-assert lane reset */ + data = mdiobus_read(priv->mii, serdes_phy_addr, SERDES_GCR0); + data &= ~SERDES_RST; + mdiobus_write(priv->mii, serdes_phy_addr, SERDES_GCR0, data); + + /* check for de-assert lane reset reflection */ + data = serdes_status_poll(priv, serdes_phy_addr, + SERDES_GSR0, + SERDES_RST, + (u32)~SERDES_RST); + + if (data) { + dev_err(priv->device, "Serdes de-assert lane reset timeout\n"); + return; + } +} + +static void intel_speed_mode_2500(struct net_device *ndev, void *intel_data) +{ + struct intel_priv_data *intel_priv = intel_data; + struct stmmac_priv *priv = netdev_priv(ndev); + int serdes_phy_addr = 0; + u32 data = 0; + + serdes_phy_addr = intel_priv->mdio_adhoc_addr; + + /* Determine the link speed mode: 2.5Gbps/1Gbps */ + data = mdiobus_read(priv->mii, serdes_phy_addr, + SERDES_GCR); + + if (((data & SERDES_LINK_MODE_MASK) >> SERDES_LINK_MODE_SHIFT) == + SERDES_LINK_MODE_2G5) { + dev_info(priv->device, "Link Speed Mode: 2.5Gbps\n"); + priv->plat->max_speed = 2500; + priv->plat->phy_interface = PHY_INTERFACE_MODE_2500BASEX; + priv->plat->mdio_bus_data->xpcs_an_inband = false; + } else { + priv->plat->max_speed = 1000; + } +} + +/* Program PTP Clock Frequency for different variant of + * Intel mGBE that has slightly different GPO mapping + */ +static void intel_mgbe_ptp_clk_freq_config(void *npriv) +{ + struct stmmac_priv *priv = (struct stmmac_priv *)npriv; + struct intel_priv_data *intel_priv; + u32 gpio_value; + + intel_priv = (struct intel_priv_data *)priv->plat->bsp_priv; + + gpio_value = readl(priv->ioaddr + GMAC_GPIO_STATUS); + + if (intel_priv->is_pse) { + /* For PSE GbE, use 200MHz */ + gpio_value &= ~PSE_PTP_CLK_FREQ_MASK; + gpio_value |= PSE_PTP_CLK_FREQ_200MHZ; + } else { + /* For PCH GbE, use 200MHz */ + gpio_value &= ~PCH_PTP_CLK_FREQ_MASK; + gpio_value |= PCH_PTP_CLK_FREQ_200MHZ; + } + + writel(gpio_value, priv->ioaddr + GMAC_GPIO_STATUS); +} + +static void get_arttime(struct mii_bus *mii, int intel_adhoc_addr, + u64 *art_time) +{ + u64 ns; + + ns = mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE3); + ns <<= GMAC4_ART_TIME_SHIFT; + ns |= mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE2); + ns <<= GMAC4_ART_TIME_SHIFT; + ns |= mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE1); + ns <<= GMAC4_ART_TIME_SHIFT; + ns |= mdiobus_read(mii, intel_adhoc_addr, PMC_ART_VALUE0); + + *art_time = ns; +} + +static int stmmac_cross_ts_isr(struct stmmac_priv *priv) +{ + return (readl(priv->ioaddr + GMAC_INT_STATUS) & GMAC_INT_TSIE); +} + +static int intel_crosststamp(ktime_t *device, + struct system_counterval_t *system, + void *ctx) +{ + struct intel_priv_data *intel_priv; + + struct stmmac_priv *priv = (struct stmmac_priv *)ctx; + void __iomem *ptpaddr = priv->ptpaddr; + void __iomem *ioaddr = priv->hw->pcsr; + unsigned long flags; + u64 art_time = 0; + u64 ptp_time = 0; + u32 num_snapshot; + u32 gpio_value; + u32 acr_value; + int i; + + if (!boot_cpu_has(X86_FEATURE_ART)) + return -EOPNOTSUPP; + + intel_priv = priv->plat->bsp_priv; + + /* Both internal crosstimestamping and external triggered event + * timestamping cannot be run concurrently. + */ + if (priv->plat->ext_snapshot_en) + return -EBUSY; + + priv->plat->int_snapshot_en = 1; + + mutex_lock(&priv->aux_ts_lock); + /* Enable Internal snapshot trigger */ + acr_value = readl(ptpaddr + PTP_ACR); + acr_value &= ~PTP_ACR_MASK; + switch (priv->plat->int_snapshot_num) { + case AUX_SNAPSHOT0: + acr_value |= PTP_ACR_ATSEN0; + break; + case AUX_SNAPSHOT1: + acr_value |= PTP_ACR_ATSEN1; + break; + case AUX_SNAPSHOT2: + acr_value |= PTP_ACR_ATSEN2; + break; + case AUX_SNAPSHOT3: + acr_value |= PTP_ACR_ATSEN3; + break; + default: + mutex_unlock(&priv->aux_ts_lock); + priv->plat->int_snapshot_en = 0; + return -EINVAL; + } + writel(acr_value, ptpaddr + PTP_ACR); + + /* Clear FIFO */ + acr_value = readl(ptpaddr + PTP_ACR); + acr_value |= PTP_ACR_ATSFC; + writel(acr_value, ptpaddr + PTP_ACR); + /* Release the mutex */ + mutex_unlock(&priv->aux_ts_lock); + + /* Trigger Internal snapshot signal + * Create a rising edge by just toggle the GPO1 to low + * and back to high. + */ + gpio_value = readl(ioaddr + GMAC_GPIO_STATUS); + gpio_value &= ~GMAC_GPO1; + writel(gpio_value, ioaddr + GMAC_GPIO_STATUS); + gpio_value |= GMAC_GPO1; + writel(gpio_value, ioaddr + GMAC_GPIO_STATUS); + + /* Time sync done Indication - Interrupt method */ + if (!wait_event_interruptible_timeout(priv->tstamp_busy_wait, + stmmac_cross_ts_isr(priv), + HZ / 100)) { + priv->plat->int_snapshot_en = 0; + return -ETIMEDOUT; + } + + num_snapshot = (readl(ioaddr + GMAC_TIMESTAMP_STATUS) & + GMAC_TIMESTAMP_ATSNS_MASK) >> + GMAC_TIMESTAMP_ATSNS_SHIFT; + + /* Repeat until the timestamps are from the FIFO last segment */ + for (i = 0; i < num_snapshot; i++) { + read_lock_irqsave(&priv->ptp_lock, flags); + stmmac_get_ptptime(priv, ptpaddr, &ptp_time); + *device = ns_to_ktime(ptp_time); + read_unlock_irqrestore(&priv->ptp_lock, flags); + get_arttime(priv->mii, intel_priv->mdio_adhoc_addr, &art_time); + *system = convert_art_to_tsc(art_time); + } + + system->cycles *= intel_priv->crossts_adj; + priv->plat->int_snapshot_en = 0; + + return 0; +} + +static void intel_mgbe_pse_crossts_adj(struct intel_priv_data *intel_priv, + int base) +{ + if (boot_cpu_has(X86_FEATURE_ART)) { + unsigned int art_freq; + + /* On systems that support ART, ART frequency can be obtained + * from ECX register of CPUID leaf (0x15). + */ + art_freq = cpuid_ecx(ART_CPUID_LEAF); + do_div(art_freq, base); + intel_priv->crossts_adj = art_freq; + } +} + +static void common_default_data(struct plat_stmmacenet_data *plat) +{ + plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ + plat->has_gmac = 1; + plat->force_sf_dma_mode = 1; + + plat->mdio_bus_data->needs_reset = true; + + /* Set default value for multicast hash bins */ + plat->multicast_filter_bins = HASH_TABLE_SIZE; + + /* Set default value for unicast filter entries */ + plat->unicast_filter_entries = 1; + + /* Set the maxmtu to a default of JUMBO_LEN */ + plat->maxmtu = JUMBO_LEN; + + /* Set default number of RX and TX queues to use */ + plat->tx_queues_to_use = 1; + plat->rx_queues_to_use = 1; + + /* Disable Priority config by default */ + plat->tx_queues_cfg[0].use_prio = false; + plat->rx_queues_cfg[0].use_prio = false; + + /* Disable RX queues routing by default */ + plat->rx_queues_cfg[0].pkt_route = 0x0; +} + +static int intel_mgbe_common_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + struct fwnode_handle *fwnode; + char clk_name[20]; + int ret; + int i; + + plat->pdev = pdev; + plat->phy_addr = -1; + plat->clk_csr = 5; + plat->has_gmac = 0; + plat->has_gmac4 = 1; + plat->force_sf_dma_mode = 0; + plat->tso_en = 1; + plat->sph_disable = 1; + + /* Multiplying factor to the clk_eee_i clock time + * period to make it closer to 100 ns. This value + * should be programmed such that the clk_eee_time_period * + * (MULT_FACT_100NS + 1) should be within 80 ns to 120 ns + * clk_eee frequency is 19.2Mhz + * clk_eee_time_period is 52ns + * 52ns * (1 + 1) = 104ns + * MULT_FACT_100NS = 1 + */ + plat->mult_fact_100ns = 1; + + plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; + + for (i = 0; i < plat->rx_queues_to_use; i++) { + plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB; + plat->rx_queues_cfg[i].chan = i; + + /* Disable Priority config by default */ + plat->rx_queues_cfg[i].use_prio = false; + + /* Disable RX queues routing by default */ + plat->rx_queues_cfg[i].pkt_route = 0x0; + } + + for (i = 0; i < plat->tx_queues_to_use; i++) { + plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB; + + /* Disable Priority config by default */ + plat->tx_queues_cfg[i].use_prio = false; + /* Default TX Q0 to use TSO and rest TXQ for TBS */ + if (i > 0) + plat->tx_queues_cfg[i].tbs_en = 1; + } + + /* FIFO size is 4096 bytes for 1 tx/rx queue */ + plat->tx_fifo_size = plat->tx_queues_to_use * 4096; + plat->rx_fifo_size = plat->rx_queues_to_use * 4096; + + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; + plat->tx_queues_cfg[0].weight = 0x09; + plat->tx_queues_cfg[1].weight = 0x0A; + plat->tx_queues_cfg[2].weight = 0x0B; + plat->tx_queues_cfg[3].weight = 0x0C; + plat->tx_queues_cfg[4].weight = 0x0D; + plat->tx_queues_cfg[5].weight = 0x0E; + plat->tx_queues_cfg[6].weight = 0x0F; + plat->tx_queues_cfg[7].weight = 0x10; + + plat->dma_cfg->pbl = 32; + plat->dma_cfg->pblx8 = true; + plat->dma_cfg->fixed_burst = 0; + plat->dma_cfg->mixed_burst = 0; + plat->dma_cfg->aal = 0; + plat->dma_cfg->dche = true; + + plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi), + GFP_KERNEL); + if (!plat->axi) + return -ENOMEM; + + plat->axi->axi_lpi_en = 0; + plat->axi->axi_xit_frm = 0; + plat->axi->axi_wr_osr_lmt = 1; + plat->axi->axi_rd_osr_lmt = 1; + plat->axi->axi_blen[0] = 4; + plat->axi->axi_blen[1] = 8; + plat->axi->axi_blen[2] = 16; + + plat->ptp_max_adj = plat->clk_ptp_rate; + plat->eee_usecs_rate = plat->clk_ptp_rate; + + /* Set system clock */ + sprintf(clk_name, "%s-%s", "stmmac", pci_name(pdev)); + + plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev, + clk_name, NULL, 0, + plat->clk_ptp_rate); + + if (IS_ERR(plat->stmmac_clk)) { + dev_warn(&pdev->dev, "Fail to register stmmac-clk\n"); + plat->stmmac_clk = NULL; + } + + ret = clk_prepare_enable(plat->stmmac_clk); + if (ret) { + clk_unregister_fixed_rate(plat->stmmac_clk); + return ret; + } + + plat->ptp_clk_freq_config = intel_mgbe_ptp_clk_freq_config; + + /* Set default value for multicast hash bins */ + plat->multicast_filter_bins = HASH_TABLE_SIZE; + + /* Set default value for unicast filter entries */ + plat->unicast_filter_entries = 1; + + /* Set the maxmtu to a default of JUMBO_LEN */ + plat->maxmtu = JUMBO_LEN; + + plat->vlan_fail_q_en = true; + + /* Use the last Rx queue */ + plat->vlan_fail_q = plat->rx_queues_to_use - 1; + + /* For fixed-link setup, we allow phy-mode setting */ + fwnode = dev_fwnode(&pdev->dev); + if (fwnode) { + int phy_mode; + + /* "phy-mode" setting is optional. If it is set, + * we allow either sgmii or 1000base-x for now. + */ + phy_mode = fwnode_get_phy_mode(fwnode); + if (phy_mode >= 0) { + if (phy_mode == PHY_INTERFACE_MODE_SGMII || + phy_mode == PHY_INTERFACE_MODE_1000BASEX) + plat->phy_interface = phy_mode; + else + dev_warn(&pdev->dev, "Invalid phy-mode\n"); + } + } + + /* Intel mgbe SGMII interface uses pcs-xcps */ + if (plat->phy_interface == PHY_INTERFACE_MODE_SGMII || + plat->phy_interface == PHY_INTERFACE_MODE_1000BASEX) { + plat->mdio_bus_data->has_xpcs = true; + plat->mdio_bus_data->xpcs_an_inband = true; + } + + /* For fixed-link setup, we clear xpcs_an_inband */ + if (fwnode) { + struct fwnode_handle *fixed_node; + + fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link"); + if (fixed_node) + plat->mdio_bus_data->xpcs_an_inband = false; + + fwnode_handle_put(fixed_node); + } + + /* Ensure mdio bus scan skips intel serdes and pcs-xpcs */ + plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR; + plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR; + + plat->int_snapshot_num = AUX_SNAPSHOT1; + plat->ext_snapshot_num = AUX_SNAPSHOT0; + + plat->crosststamp = intel_crosststamp; + plat->int_snapshot_en = 0; + + /* Setup MSI vector offset specific to Intel mGbE controller */ + plat->msi_mac_vec = 29; + plat->msi_lpi_vec = 28; + plat->msi_sfty_ce_vec = 27; + plat->msi_sfty_ue_vec = 26; + plat->msi_rx_base_vec = 0; + plat->msi_tx_base_vec = 1; + + return 0; +} + +static int ehl_common_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->rx_queues_to_use = 8; + plat->tx_queues_to_use = 8; + plat->use_phy_wol = 1; + + plat->safety_feat_cfg->tsoee = 1; + plat->safety_feat_cfg->mrxpee = 1; + plat->safety_feat_cfg->mestee = 1; + plat->safety_feat_cfg->mrxee = 1; + plat->safety_feat_cfg->mtxee = 1; + plat->safety_feat_cfg->epsi = 0; + plat->safety_feat_cfg->edpp = 0; + plat->safety_feat_cfg->prtyen = 0; + plat->safety_feat_cfg->tmouten = 0; + + return intel_mgbe_common_data(pdev, plat); +} + +static int ehl_sgmii_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->bus_id = 1; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + plat->speed_mode_2500 = intel_speed_mode_2500; + plat->serdes_powerup = intel_serdes_powerup; + plat->serdes_powerdown = intel_serdes_powerdown; + + plat->clk_ptp_rate = 204800000; + + return ehl_common_data(pdev, plat); +} + +static struct stmmac_pci_info ehl_sgmii1g_info = { + .setup = ehl_sgmii_data, +}; + +static int ehl_rgmii_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->bus_id = 1; + plat->phy_interface = PHY_INTERFACE_MODE_RGMII; + + plat->clk_ptp_rate = 204800000; + + return ehl_common_data(pdev, plat); +} + +static struct stmmac_pci_info ehl_rgmii1g_info = { + .setup = ehl_rgmii_data, +}; + +static int ehl_pse0_common_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + struct intel_priv_data *intel_priv = plat->bsp_priv; + + intel_priv->is_pse = true; + plat->bus_id = 2; + plat->host_dma_width = 32; + + plat->clk_ptp_rate = 200000000; + + intel_mgbe_pse_crossts_adj(intel_priv, EHL_PSE_ART_MHZ); + + return ehl_common_data(pdev, plat); +} + +static int ehl_pse0_rgmii1g_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID; + return ehl_pse0_common_data(pdev, plat); +} + +static struct stmmac_pci_info ehl_pse0_rgmii1g_info = { + .setup = ehl_pse0_rgmii1g_data, +}; + +static int ehl_pse0_sgmii1g_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + plat->speed_mode_2500 = intel_speed_mode_2500; + plat->serdes_powerup = intel_serdes_powerup; + plat->serdes_powerdown = intel_serdes_powerdown; + return ehl_pse0_common_data(pdev, plat); +} + +static struct stmmac_pci_info ehl_pse0_sgmii1g_info = { + .setup = ehl_pse0_sgmii1g_data, +}; + +static int ehl_pse1_common_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + struct intel_priv_data *intel_priv = plat->bsp_priv; + + intel_priv->is_pse = true; + plat->bus_id = 3; + plat->host_dma_width = 32; + + plat->clk_ptp_rate = 200000000; + + intel_mgbe_pse_crossts_adj(intel_priv, EHL_PSE_ART_MHZ); + + return ehl_common_data(pdev, plat); +} + +static int ehl_pse1_rgmii1g_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID; + return ehl_pse1_common_data(pdev, plat); +} + +static struct stmmac_pci_info ehl_pse1_rgmii1g_info = { + .setup = ehl_pse1_rgmii1g_data, +}; + +static int ehl_pse1_sgmii1g_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + plat->speed_mode_2500 = intel_speed_mode_2500; + plat->serdes_powerup = intel_serdes_powerup; + plat->serdes_powerdown = intel_serdes_powerdown; + return ehl_pse1_common_data(pdev, plat); +} + +static struct stmmac_pci_info ehl_pse1_sgmii1g_info = { + .setup = ehl_pse1_sgmii1g_data, +}; + +static int tgl_common_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->rx_queues_to_use = 6; + plat->tx_queues_to_use = 4; + plat->clk_ptp_rate = 204800000; + plat->speed_mode_2500 = intel_speed_mode_2500; + + plat->safety_feat_cfg->tsoee = 1; + plat->safety_feat_cfg->mrxpee = 0; + plat->safety_feat_cfg->mestee = 1; + plat->safety_feat_cfg->mrxee = 1; + plat->safety_feat_cfg->mtxee = 1; + plat->safety_feat_cfg->epsi = 0; + plat->safety_feat_cfg->edpp = 0; + plat->safety_feat_cfg->prtyen = 0; + plat->safety_feat_cfg->tmouten = 0; + + return intel_mgbe_common_data(pdev, plat); +} + +static int tgl_sgmii_phy0_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->bus_id = 1; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + plat->serdes_powerup = intel_serdes_powerup; + plat->serdes_powerdown = intel_serdes_powerdown; + return tgl_common_data(pdev, plat); +} + +static struct stmmac_pci_info tgl_sgmii1g_phy0_info = { + .setup = tgl_sgmii_phy0_data, +}; + +static int tgl_sgmii_phy1_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->bus_id = 2; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + plat->serdes_powerup = intel_serdes_powerup; + plat->serdes_powerdown = intel_serdes_powerdown; + return tgl_common_data(pdev, plat); +} + +static struct stmmac_pci_info tgl_sgmii1g_phy1_info = { + .setup = tgl_sgmii_phy1_data, +}; + +static int adls_sgmii_phy0_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->bus_id = 1; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + + /* SerDes power up and power down are done in BIOS for ADL */ + + return tgl_common_data(pdev, plat); +} + +static struct stmmac_pci_info adls_sgmii1g_phy0_info = { + .setup = adls_sgmii_phy0_data, +}; + +static int adls_sgmii_phy1_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + plat->bus_id = 2; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + + /* SerDes power up and power down are done in BIOS for ADL */ + + return tgl_common_data(pdev, plat); +} + +static struct stmmac_pci_info adls_sgmii1g_phy1_info = { + .setup = adls_sgmii_phy1_data, +}; +static const struct stmmac_pci_func_data galileo_stmmac_func_data[] = { + { + .func = 6, + .phy_addr = 1, + }, +}; + +static const struct stmmac_pci_dmi_data galileo_stmmac_dmi_data = { + .func = galileo_stmmac_func_data, + .nfuncs = ARRAY_SIZE(galileo_stmmac_func_data), +}; + +static const struct stmmac_pci_func_data iot2040_stmmac_func_data[] = { + { + .func = 6, + .phy_addr = 1, + }, + { + .func = 7, + .phy_addr = 1, + }, +}; + +static const struct stmmac_pci_dmi_data iot2040_stmmac_dmi_data = { + .func = iot2040_stmmac_func_data, + .nfuncs = ARRAY_SIZE(iot2040_stmmac_func_data), +}; + +static const struct dmi_system_id quark_pci_dmi[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"), + }, + .driver_data = (void *)&galileo_stmmac_dmi_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"), + }, + .driver_data = (void *)&galileo_stmmac_dmi_data, + }, + /* There are 2 types of SIMATIC IOT2000: IOT2020 and IOT2040. + * The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which + * has only one pci network device while other asset tags are + * for IOT2040 which has two. + */ + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), + DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, + "6ES7647-0AA00-0YA2"), + }, + .driver_data = (void *)&galileo_stmmac_dmi_data, + }, + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), + }, + .driver_data = (void *)&iot2040_stmmac_dmi_data, + }, + {} +}; + +static int quark_default_data(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat) +{ + int ret; + + /* Set common default data first */ + common_default_data(plat); + + /* Refuse to load the driver and register net device if MAC controller + * does not connect to any PHY interface. + */ + ret = stmmac_pci_find_phy_addr(pdev, quark_pci_dmi); + if (ret < 0) { + /* Return error to the caller on DMI enabled boards. */ + if (dmi_get_system_info(DMI_BOARD_NAME)) + return ret; + + /* Galileo boards with old firmware don't support DMI. We always + * use 1 here as PHY address, so at least the first found MAC + * controller would be probed. + */ + ret = 1; + } + + plat->bus_id = pci_dev_id(pdev); + plat->phy_addr = ret; + plat->phy_interface = PHY_INTERFACE_MODE_RMII; + + plat->dma_cfg->pbl = 16; + plat->dma_cfg->pblx8 = true; + plat->dma_cfg->fixed_burst = 1; + /* AXI (TODO) */ + + return 0; +} + +static const struct stmmac_pci_info quark_info = { + .setup = quark_default_data, +}; + +static int stmmac_config_single_msi(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat, + struct stmmac_resources *res) +{ + int ret; + + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); + if (ret < 0) { + dev_info(&pdev->dev, "%s: Single IRQ enablement failed\n", + __func__); + return ret; + } + + res->irq = pci_irq_vector(pdev, 0); + res->wol_irq = res->irq; + plat->multi_msi_en = 0; + dev_info(&pdev->dev, "%s: Single IRQ enablement successful\n", + __func__); + + return 0; +} + +static int stmmac_config_multi_msi(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat, + struct stmmac_resources *res) +{ + int ret; + int i; + + if (plat->msi_rx_base_vec >= STMMAC_MSI_VEC_MAX || + plat->msi_tx_base_vec >= STMMAC_MSI_VEC_MAX) { + dev_info(&pdev->dev, "%s: Invalid RX & TX vector defined\n", + __func__); + return -1; + } + + ret = pci_alloc_irq_vectors(pdev, 2, STMMAC_MSI_VEC_MAX, + PCI_IRQ_MSI | PCI_IRQ_MSIX); + if (ret < 0) { + dev_info(&pdev->dev, "%s: multi MSI enablement failed\n", + __func__); + return ret; + } + + /* For RX MSI */ + for (i = 0; i < plat->rx_queues_to_use; i++) { + res->rx_irq[i] = pci_irq_vector(pdev, + plat->msi_rx_base_vec + i * 2); + } + + /* For TX MSI */ + for (i = 0; i < plat->tx_queues_to_use; i++) { + res->tx_irq[i] = pci_irq_vector(pdev, + plat->msi_tx_base_vec + i * 2); + } + + if (plat->msi_mac_vec < STMMAC_MSI_VEC_MAX) + res->irq = pci_irq_vector(pdev, plat->msi_mac_vec); + if (plat->msi_wol_vec < STMMAC_MSI_VEC_MAX) + res->wol_irq = pci_irq_vector(pdev, plat->msi_wol_vec); + if (plat->msi_lpi_vec < STMMAC_MSI_VEC_MAX) + res->lpi_irq = pci_irq_vector(pdev, plat->msi_lpi_vec); + if (plat->msi_sfty_ce_vec < STMMAC_MSI_VEC_MAX) + res->sfty_ce_irq = pci_irq_vector(pdev, plat->msi_sfty_ce_vec); + if (plat->msi_sfty_ue_vec < STMMAC_MSI_VEC_MAX) + res->sfty_ue_irq = pci_irq_vector(pdev, plat->msi_sfty_ue_vec); + + plat->multi_msi_en = 1; + dev_info(&pdev->dev, "%s: multi MSI enablement successful\n", __func__); + + return 0; +} + +/** + * intel_eth_pci_probe + * + * @pdev: pci device pointer + * @id: pointer to table of device id/id's. + * + * Description: This probing function gets called for all PCI devices which + * match the ID table and are not "owned" by other driver yet. This function + * gets passed a "struct pci_dev *" for each device whose entry in the ID table + * matches the device. The probe functions returns zero when the driver choose + * to take "ownership" of the device or an error code(-ve no) otherwise. + */ +static int intel_eth_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data; + struct intel_priv_data *intel_priv; + struct plat_stmmacenet_data *plat; + struct stmmac_resources res; + int ret; + + intel_priv = devm_kzalloc(&pdev->dev, sizeof(*intel_priv), GFP_KERNEL); + if (!intel_priv) + return -ENOMEM; + + plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + + plat->mdio_bus_data = devm_kzalloc(&pdev->dev, + sizeof(*plat->mdio_bus_data), + GFP_KERNEL); + if (!plat->mdio_bus_data) + return -ENOMEM; + + plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), + GFP_KERNEL); + if (!plat->dma_cfg) + return -ENOMEM; + + plat->safety_feat_cfg = devm_kzalloc(&pdev->dev, + sizeof(*plat->safety_feat_cfg), + GFP_KERNEL); + if (!plat->safety_feat_cfg) + return -ENOMEM; + + /* Enable pci device */ + ret = pcim_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", + __func__); + return ret; + } + + ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev)); + if (ret) + return ret; + + pci_set_master(pdev); + + plat->bsp_priv = intel_priv; + intel_priv->mdio_adhoc_addr = INTEL_MGBE_ADHOC_ADDR; + intel_priv->crossts_adj = 1; + + /* Initialize all MSI vectors to invalid so that it can be set + * according to platform data settings below. + * Note: MSI vector takes value from 0 upto 31 (STMMAC_MSI_VEC_MAX) + */ + plat->msi_mac_vec = STMMAC_MSI_VEC_MAX; + plat->msi_wol_vec = STMMAC_MSI_VEC_MAX; + plat->msi_lpi_vec = STMMAC_MSI_VEC_MAX; + plat->msi_sfty_ce_vec = STMMAC_MSI_VEC_MAX; + plat->msi_sfty_ue_vec = STMMAC_MSI_VEC_MAX; + plat->msi_rx_base_vec = STMMAC_MSI_VEC_MAX; + plat->msi_tx_base_vec = STMMAC_MSI_VEC_MAX; + + ret = info->setup(pdev, plat); + if (ret) + return ret; + + memset(&res, 0, sizeof(res)); + res.addr = pcim_iomap_table(pdev)[0]; + + if (plat->eee_usecs_rate > 0) { + u32 tx_lpi_usec; + + tx_lpi_usec = (plat->eee_usecs_rate / 1000000) - 1; + writel(tx_lpi_usec, res.addr + GMAC_1US_TIC_COUNTER); + } + + ret = stmmac_config_multi_msi(pdev, plat, &res); + if (ret) { + ret = stmmac_config_single_msi(pdev, plat, &res); + if (ret) { + dev_err(&pdev->dev, "%s: ERROR: failed to enable IRQ\n", + __func__); + goto err_alloc_irq; + } + } + + ret = stmmac_dvr_probe(&pdev->dev, plat, &res); + if (ret) { + goto err_alloc_irq; + } + + return 0; + +err_alloc_irq: + clk_disable_unprepare(plat->stmmac_clk); + clk_unregister_fixed_rate(plat->stmmac_clk); + return ret; +} + +/** + * intel_eth_pci_remove + * + * @pdev: pci device pointer + * Description: this function calls the main to free the net resources + * and releases the PCI resources. + */ +static void intel_eth_pci_remove(struct pci_dev *pdev) +{ + struct net_device *ndev = dev_get_drvdata(&pdev->dev); + struct stmmac_priv *priv = netdev_priv(ndev); + + stmmac_dvr_remove(&pdev->dev); + + clk_disable_unprepare(priv->plat->stmmac_clk); + clk_unregister_fixed_rate(priv->plat->stmmac_clk); +} + +static int __maybe_unused intel_eth_pci_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int ret; + + ret = stmmac_suspend(dev); + if (ret) + return ret; + + ret = pci_save_state(pdev); + if (ret) + return ret; + + pci_wake_from_d3(pdev, true); + pci_set_power_state(pdev, PCI_D3hot); + return 0; +} + +static int __maybe_unused intel_eth_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int ret; + + pci_restore_state(pdev); + pci_set_power_state(pdev, PCI_D0); + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + pci_set_master(pdev); + + return stmmac_resume(dev); +} + +static SIMPLE_DEV_PM_OPS(intel_eth_pm_ops, intel_eth_pci_suspend, + intel_eth_pci_resume); + +#define PCI_DEVICE_ID_INTEL_QUARK 0x0937 +#define PCI_DEVICE_ID_INTEL_EHL_RGMII1G 0x4b30 +#define PCI_DEVICE_ID_INTEL_EHL_SGMII1G 0x4b31 +#define PCI_DEVICE_ID_INTEL_EHL_SGMII2G5 0x4b32 +/* Intel(R) Programmable Services Engine (Intel(R) PSE) consist of 2 MAC + * which are named PSE0 and PSE1 + */ +#define PCI_DEVICE_ID_INTEL_EHL_PSE0_RGMII1G 0x4ba0 +#define PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII1G 0x4ba1 +#define PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII2G5 0x4ba2 +#define PCI_DEVICE_ID_INTEL_EHL_PSE1_RGMII1G 0x4bb0 +#define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII1G 0x4bb1 +#define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII2G5 0x4bb2 +#define PCI_DEVICE_ID_INTEL_TGLH_SGMII1G_0 0x43ac +#define PCI_DEVICE_ID_INTEL_TGLH_SGMII1G_1 0x43a2 +#define PCI_DEVICE_ID_INTEL_TGL_SGMII1G 0xa0ac +#define PCI_DEVICE_ID_INTEL_ADLS_SGMII1G_0 0x7aac +#define PCI_DEVICE_ID_INTEL_ADLS_SGMII1G_1 0x7aad +#define PCI_DEVICE_ID_INTEL_ADLN_SGMII1G 0x54ac +#define PCI_DEVICE_ID_INTEL_RPLP_SGMII1G 0x51ac + +static const struct pci_device_id intel_eth_pci_id_table[] = { + { PCI_DEVICE_DATA(INTEL, QUARK, &quark_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_RGMII1G, &ehl_rgmii1g_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_SGMII1G, &ehl_sgmii1g_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_SGMII2G5, &ehl_sgmii1g_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_PSE0_RGMII1G, &ehl_pse0_rgmii1g_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII1G, &ehl_pse0_sgmii1g_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_PSE0_SGMII2G5, &ehl_pse0_sgmii1g_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_PSE1_RGMII1G, &ehl_pse1_rgmii1g_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII1G, &ehl_pse1_sgmii1g_info) }, + { PCI_DEVICE_DATA(INTEL, EHL_PSE1_SGMII2G5, &ehl_pse1_sgmii1g_info) }, + { PCI_DEVICE_DATA(INTEL, TGL_SGMII1G, &tgl_sgmii1g_phy0_info) }, + { PCI_DEVICE_DATA(INTEL, TGLH_SGMII1G_0, &tgl_sgmii1g_phy0_info) }, + { PCI_DEVICE_DATA(INTEL, TGLH_SGMII1G_1, &tgl_sgmii1g_phy1_info) }, + { PCI_DEVICE_DATA(INTEL, ADLS_SGMII1G_0, &adls_sgmii1g_phy0_info) }, + { PCI_DEVICE_DATA(INTEL, ADLS_SGMII1G_1, &adls_sgmii1g_phy1_info) }, + { PCI_DEVICE_DATA(INTEL, ADLN_SGMII1G, &tgl_sgmii1g_phy0_info) }, + { PCI_DEVICE_DATA(INTEL, RPLP_SGMII1G, &tgl_sgmii1g_phy0_info) }, + {} +}; +MODULE_DEVICE_TABLE(pci, intel_eth_pci_id_table); + +static struct pci_driver intel_eth_pci_driver = { + .name = "intel-eth-pci", + .id_table = intel_eth_pci_id_table, + .probe = intel_eth_pci_probe, + .remove = intel_eth_pci_remove, + .driver = { + .pm = &intel_eth_pm_ops, + }, +}; + +module_pci_driver(intel_eth_pci_driver); + +MODULE_DESCRIPTION("INTEL 10/100/1000 Ethernet PCI driver"); +MODULE_AUTHOR("Voon Weifeng <weifeng.voon@intel.com>"); +MODULE_LICENSE("GPL v2"); |