diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 512 |
1 files changed, 512 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c new file mode 100644 index 000000000..e888c8a9c --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c @@ -0,0 +1,512 @@ +/* + * Qualcomm Atheros IPQ806x GMAC glue layer + * + * Copyright (C) 2015 The Linux Foundation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/phy.h> +#include <linux/regmap.h> +#include <linux/clk.h> +#include <linux/reset.h> +#include <linux/of_net.h> +#include <linux/mfd/syscon.h> +#include <linux/stmmac.h> +#include <linux/of_mdio.h> +#include <linux/module.h> +#include <linux/sys_soc.h> +#include <linux/bitfield.h> + +#include "stmmac_platform.h" + +#define NSS_COMMON_CLK_GATE 0x8 +#define NSS_COMMON_CLK_GATE_PTP_EN(x) BIT(0x10 + x) +#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x) BIT(0x9 + (x * 2)) +#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x) BIT(0x8 + (x * 2)) +#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x) BIT(0x4 + x) +#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x) BIT(0x0 + x) + +#define NSS_COMMON_CLK_DIV0 0xC +#define NSS_COMMON_CLK_DIV_OFFSET(x) (x * 8) +#define NSS_COMMON_CLK_DIV_MASK 0x7f + +#define NSS_COMMON_CLK_SRC_CTRL 0x14 +#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x) (x) +/* Mode is coded on 1 bit but is different depending on the MAC ID: + * MAC0: QSGMII=0 RGMII=1 + * MAC1: QSGMII=0 SGMII=0 RGMII=1 + * MAC2 & MAC3: QSGMII=0 SGMII=1 + */ +#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x) 1 +#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x) ((x >= 2) ? 1 : 0) + +#define NSS_COMMON_GMAC_CTL(x) (0x30 + (x * 4)) +#define NSS_COMMON_GMAC_CTL_CSYS_REQ BIT(19) +#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL BIT(16) +#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET 8 +#define NSS_COMMON_GMAC_CTL_IFG_OFFSET 0 + +#define NSS_COMMON_CLK_DIV_RGMII_1000 1 +#define NSS_COMMON_CLK_DIV_RGMII_100 9 +#define NSS_COMMON_CLK_DIV_RGMII_10 99 +#define NSS_COMMON_CLK_DIV_SGMII_1000 0 +#define NSS_COMMON_CLK_DIV_SGMII_100 4 +#define NSS_COMMON_CLK_DIV_SGMII_10 49 + +#define QSGMII_PCS_ALL_CH_CTL 0x80 +#define QSGMII_PCS_CH_SPEED_FORCE BIT(1) +#define QSGMII_PCS_CH_SPEED_10 0x0 +#define QSGMII_PCS_CH_SPEED_100 BIT(2) +#define QSGMII_PCS_CH_SPEED_1000 BIT(3) +#define QSGMII_PCS_CH_SPEED_MASK (QSGMII_PCS_CH_SPEED_FORCE | \ + QSGMII_PCS_CH_SPEED_10 | \ + QSGMII_PCS_CH_SPEED_100 | \ + QSGMII_PCS_CH_SPEED_1000) +#define QSGMII_PCS_CH_SPEED_SHIFT(x) ((x) * 4) + +#define QSGMII_PCS_CAL_LCKDT_CTL 0x120 +#define QSGMII_PCS_CAL_LCKDT_CTL_RST BIT(19) + +/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */ +#define QSGMII_PHY_SGMII_CTL(x) ((x == 1) ? 0x134 : \ + (0x13c + (4 * (x - 2)))) +#define QSGMII_PHY_CDR_EN BIT(0) +#define QSGMII_PHY_RX_FRONT_EN BIT(1) +#define QSGMII_PHY_RX_SIGNAL_DETECT_EN BIT(2) +#define QSGMII_PHY_TX_DRIVER_EN BIT(3) +#define QSGMII_PHY_QSGMII_EN BIT(7) +#define QSGMII_PHY_DEEMPHASIS_LVL_MASK GENMASK(11, 10) +#define QSGMII_PHY_DEEMPHASIS_LVL(x) FIELD_PREP(QSGMII_PHY_DEEMPHASIS_LVL_MASK, (x)) +#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK GENMASK(14, 12) +#define QSGMII_PHY_PHASE_LOOP_GAIN(x) FIELD_PREP(QSGMII_PHY_PHASE_LOOP_GAIN_MASK, (x)) +#define QSGMII_PHY_RX_DC_BIAS_MASK GENMASK(19, 18) +#define QSGMII_PHY_RX_DC_BIAS(x) FIELD_PREP(QSGMII_PHY_RX_DC_BIAS_MASK, (x)) +#define QSGMII_PHY_RX_INPUT_EQU_MASK GENMASK(21, 20) +#define QSGMII_PHY_RX_INPUT_EQU(x) FIELD_PREP(QSGMII_PHY_RX_INPUT_EQU_MASK, (x)) +#define QSGMII_PHY_CDR_PI_SLEW_MASK GENMASK(23, 22) +#define QSGMII_PHY_CDR_PI_SLEW(x) FIELD_PREP(QSGMII_PHY_CDR_PI_SLEW_MASK, (x)) +#define QSGMII_PHY_TX_SLEW_MASK GENMASK(27, 26) +#define QSGMII_PHY_TX_SLEW(x) FIELD_PREP(QSGMII_PHY_TX_SLEW_MASK, (x)) +#define QSGMII_PHY_TX_DRV_AMP_MASK GENMASK(31, 28) +#define QSGMII_PHY_TX_DRV_AMP(x) FIELD_PREP(QSGMII_PHY_TX_DRV_AMP_MASK, (x)) + +struct ipq806x_gmac { + struct platform_device *pdev; + struct regmap *nss_common; + struct regmap *qsgmii_csr; + uint32_t id; + struct clk *core_clk; + phy_interface_t phy_mode; +}; + +static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed) +{ + struct device *dev = &gmac->pdev->dev; + int div; + + switch (speed) { + case SPEED_1000: + div = NSS_COMMON_CLK_DIV_SGMII_1000; + break; + + case SPEED_100: + div = NSS_COMMON_CLK_DIV_SGMII_100; + break; + + case SPEED_10: + div = NSS_COMMON_CLK_DIV_SGMII_10; + break; + + default: + dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed); + return -EINVAL; + } + + return div; +} + +static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed) +{ + struct device *dev = &gmac->pdev->dev; + int div; + + switch (speed) { + case SPEED_1000: + div = NSS_COMMON_CLK_DIV_RGMII_1000; + break; + + case SPEED_100: + div = NSS_COMMON_CLK_DIV_RGMII_100; + break; + + case SPEED_10: + div = NSS_COMMON_CLK_DIV_RGMII_10; + break; + + default: + dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed); + return -EINVAL; + } + + return div; +} + +static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed) +{ + uint32_t clk_bits, val; + int div; + + switch (gmac->phy_mode) { + case PHY_INTERFACE_MODE_RGMII: + div = get_clk_div_rgmii(gmac, speed); + clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) | + NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id); + break; + + case PHY_INTERFACE_MODE_SGMII: + div = get_clk_div_sgmii(gmac, speed); + clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) | + NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id); + break; + + default: + dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n", + phy_modes(gmac->phy_mode)); + return -EINVAL; + } + + /* Disable the clocks */ + regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); + val &= ~clk_bits; + regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); + + /* Set the divider */ + regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val); + val &= ~(NSS_COMMON_CLK_DIV_MASK + << NSS_COMMON_CLK_DIV_OFFSET(gmac->id)); + val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id); + regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val); + + /* Enable the clock back */ + regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); + val |= clk_bits; + regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); + + return 0; +} + +static int ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac) +{ + struct device *dev = &gmac->pdev->dev; + int ret; + + ret = of_get_phy_mode(dev->of_node, &gmac->phy_mode); + if (ret) { + dev_err(dev, "missing phy mode property\n"); + return -EINVAL; + } + + if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) { + dev_err(dev, "missing qcom id property\n"); + return -EINVAL; + } + + /* The GMACs are called 1 to 4 in the documentation, but to simplify the + * code and keep it consistent with the Linux convention, we'll number + * them from 0 to 3 here. + */ + if (gmac->id > 3) { + dev_err(dev, "invalid gmac id\n"); + return -EINVAL; + } + + gmac->core_clk = devm_clk_get(dev, "stmmaceth"); + if (IS_ERR(gmac->core_clk)) { + dev_err(dev, "missing stmmaceth clk property\n"); + return PTR_ERR(gmac->core_clk); + } + clk_set_rate(gmac->core_clk, 266000000); + + /* Setup the register map for the nss common registers */ + gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node, + "qcom,nss-common"); + if (IS_ERR(gmac->nss_common)) { + dev_err(dev, "missing nss-common node\n"); + return PTR_ERR(gmac->nss_common); + } + + /* Setup the register map for the qsgmii csr registers */ + gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node, + "qcom,qsgmii-csr"); + if (IS_ERR(gmac->qsgmii_csr)) + dev_err(dev, "missing qsgmii-csr node\n"); + + return PTR_ERR_OR_ZERO(gmac->qsgmii_csr); +} + +static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed) +{ + struct ipq806x_gmac *gmac = priv; + + ipq806x_gmac_set_speed(gmac, speed); +} + +static int +ipq806x_gmac_configure_qsgmii_pcs_speed(struct ipq806x_gmac *gmac) +{ + struct platform_device *pdev = gmac->pdev; + struct device *dev = &pdev->dev; + struct device_node *dn; + int link_speed; + int val = 0; + int ret; + + /* Some bootloader may apply wrong configuration and cause + * not functioning port. If fixed link is not set, + * reset the force speed bit. + */ + if (!of_phy_is_fixed_link(pdev->dev.of_node)) + goto write; + + dn = of_get_child_by_name(pdev->dev.of_node, "fixed-link"); + ret = of_property_read_u32(dn, "speed", &link_speed); + of_node_put(dn); + if (ret) { + dev_err(dev, "found fixed-link node with no speed"); + return ret; + } + + val = QSGMII_PCS_CH_SPEED_FORCE; + + switch (link_speed) { + case SPEED_1000: + val |= QSGMII_PCS_CH_SPEED_1000; + break; + case SPEED_100: + val |= QSGMII_PCS_CH_SPEED_100; + break; + case SPEED_10: + val |= QSGMII_PCS_CH_SPEED_10; + break; + } + +write: + regmap_update_bits(gmac->qsgmii_csr, QSGMII_PCS_ALL_CH_CTL, + QSGMII_PCS_CH_SPEED_MASK << + QSGMII_PCS_CH_SPEED_SHIFT(gmac->id), + val << + QSGMII_PCS_CH_SPEED_SHIFT(gmac->id)); + + return 0; +} + +static const struct soc_device_attribute ipq806x_gmac_soc_v1[] = { + { + .revision = "1.*", + }, + { + /* sentinel */ + } +}; + +static int +ipq806x_gmac_configure_qsgmii_params(struct ipq806x_gmac *gmac) +{ + struct platform_device *pdev = gmac->pdev; + const struct soc_device_attribute *soc; + struct device *dev = &pdev->dev; + u32 qsgmii_param; + + switch (gmac->id) { + case 1: + soc = soc_device_match(ipq806x_gmac_soc_v1); + + if (soc) + qsgmii_param = QSGMII_PHY_TX_DRV_AMP(0xc) | + QSGMII_PHY_TX_SLEW(0x2) | + QSGMII_PHY_DEEMPHASIS_LVL(0x2); + else + qsgmii_param = QSGMII_PHY_TX_DRV_AMP(0xd) | + QSGMII_PHY_TX_SLEW(0x0) | + QSGMII_PHY_DEEMPHASIS_LVL(0x0); + + qsgmii_param |= QSGMII_PHY_RX_DC_BIAS(0x2); + break; + case 2: + case 3: + qsgmii_param = QSGMII_PHY_RX_DC_BIAS(0x3) | + QSGMII_PHY_TX_DRV_AMP(0xc); + break; + default: /* gmac 0 can't be set in SGMII mode */ + dev_err(dev, "gmac id %d can't be in SGMII mode", gmac->id); + return -EINVAL; + } + + /* Common params across all gmac id */ + qsgmii_param |= QSGMII_PHY_CDR_EN | + QSGMII_PHY_RX_FRONT_EN | + QSGMII_PHY_RX_SIGNAL_DETECT_EN | + QSGMII_PHY_TX_DRIVER_EN | + QSGMII_PHY_QSGMII_EN | + QSGMII_PHY_PHASE_LOOP_GAIN(0x4) | + QSGMII_PHY_RX_INPUT_EQU(0x1) | + QSGMII_PHY_CDR_PI_SLEW(0x2); + + regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id), + qsgmii_param); + + return 0; +} + +static int ipq806x_gmac_probe(struct platform_device *pdev) +{ + struct plat_stmmacenet_data *plat_dat; + struct stmmac_resources stmmac_res; + struct device *dev = &pdev->dev; + struct ipq806x_gmac *gmac; + int val; + int err; + + val = stmmac_get_platform_resources(pdev, &stmmac_res); + if (val) + return val; + + plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + + gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL); + if (!gmac) { + err = -ENOMEM; + goto err_remove_config_dt; + } + + gmac->pdev = pdev; + + err = ipq806x_gmac_of_parse(gmac); + if (err) { + dev_err(dev, "device tree parsing error\n"); + goto err_remove_config_dt; + } + + regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL, + QSGMII_PCS_CAL_LCKDT_CTL_RST); + + /* Inter frame gap is set to 12 */ + val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET | + 12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET; + /* We also initiate an AXI low power exit request */ + val |= NSS_COMMON_GMAC_CTL_CSYS_REQ; + switch (gmac->phy_mode) { + case PHY_INTERFACE_MODE_RGMII: + val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL; + break; + case PHY_INTERFACE_MODE_SGMII: + val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL; + break; + default: + goto err_unsupported_phy; + } + regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val); + + /* Configure the clock src according to the mode */ + regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val); + val &= ~(1 << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id)); + switch (gmac->phy_mode) { + case PHY_INTERFACE_MODE_RGMII: + val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) << + NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id); + break; + case PHY_INTERFACE_MODE_SGMII: + val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) << + NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id); + break; + default: + goto err_unsupported_phy; + } + regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val); + + /* Enable PTP clock */ + regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val); + val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id); + switch (gmac->phy_mode) { + case PHY_INTERFACE_MODE_RGMII: + val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) | + NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id); + break; + case PHY_INTERFACE_MODE_SGMII: + val |= NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) | + NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id); + break; + default: + goto err_unsupported_phy; + } + regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val); + + if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) { + err = ipq806x_gmac_configure_qsgmii_params(gmac); + if (err) + goto err_remove_config_dt; + + err = ipq806x_gmac_configure_qsgmii_pcs_speed(gmac); + if (err) + goto err_remove_config_dt; + } + + plat_dat->has_gmac = true; + plat_dat->bsp_priv = gmac; + plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed; + plat_dat->multicast_filter_bins = 0; + plat_dat->tx_fifo_size = 8192; + plat_dat->rx_fifo_size = 8192; + + err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); + if (err) + goto err_remove_config_dt; + + return 0; + +err_unsupported_phy: + dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n", + phy_modes(gmac->phy_mode)); + err = -EINVAL; + +err_remove_config_dt: + stmmac_remove_config_dt(pdev, plat_dat); + + return err; +} + +static const struct of_device_id ipq806x_gmac_dwmac_match[] = { + { .compatible = "qcom,ipq806x-gmac" }, + { } +}; +MODULE_DEVICE_TABLE(of, ipq806x_gmac_dwmac_match); + +static struct platform_driver ipq806x_gmac_dwmac_driver = { + .probe = ipq806x_gmac_probe, + .remove = stmmac_pltfr_remove, + .driver = { + .name = "ipq806x-gmac-dwmac", + .pm = &stmmac_pltfr_pm_ops, + .of_match_table = ipq806x_gmac_dwmac_match, + }, +}; +module_platform_driver(ipq806x_gmac_dwmac_driver); + +MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>"); +MODULE_DESCRIPTION("Qualcomm Atheros IPQ806x DWMAC specific glue layer"); +MODULE_LICENSE("Dual BSD/GPL"); |