diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c | 715 |
1 files changed, 715 insertions, 0 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c new file mode 100644 index 000000000..9ae31e3dc --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c @@ -0,0 +1,715 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 MediaTek Inc. + */ +#include <linux/bitfield.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_net.h> +#include <linux/regmap.h> +#include <linux/stmmac.h> + +#include "stmmac.h" +#include "stmmac_platform.h" + +/* Peri Configuration register for mt2712 */ +#define PERI_ETH_PHY_INTF_SEL 0x418 +#define PHY_INTF_MII 0 +#define PHY_INTF_RGMII 1 +#define PHY_INTF_RMII 4 +#define RMII_CLK_SRC_RXC BIT(4) +#define RMII_CLK_SRC_INTERNAL BIT(5) + +#define PERI_ETH_DLY 0x428 +#define ETH_DLY_GTXC_INV BIT(6) +#define ETH_DLY_GTXC_ENABLE BIT(5) +#define ETH_DLY_GTXC_STAGES GENMASK(4, 0) +#define ETH_DLY_TXC_INV BIT(20) +#define ETH_DLY_TXC_ENABLE BIT(19) +#define ETH_DLY_TXC_STAGES GENMASK(18, 14) +#define ETH_DLY_RXC_INV BIT(13) +#define ETH_DLY_RXC_ENABLE BIT(12) +#define ETH_DLY_RXC_STAGES GENMASK(11, 7) + +#define PERI_ETH_DLY_FINE 0x800 +#define ETH_RMII_DLY_TX_INV BIT(2) +#define ETH_FINE_DLY_GTXC BIT(1) +#define ETH_FINE_DLY_RXC BIT(0) + +/* Peri Configuration register for mt8195 */ +#define MT8195_PERI_ETH_CTRL0 0xFD0 +#define MT8195_RMII_CLK_SRC_INTERNAL BIT(28) +#define MT8195_RMII_CLK_SRC_RXC BIT(27) +#define MT8195_ETH_INTF_SEL GENMASK(26, 24) +#define MT8195_RGMII_TXC_PHASE_CTRL BIT(22) +#define MT8195_EXT_PHY_MODE BIT(21) +#define MT8195_DLY_GTXC_INV BIT(12) +#define MT8195_DLY_GTXC_ENABLE BIT(5) +#define MT8195_DLY_GTXC_STAGES GENMASK(4, 0) + +#define MT8195_PERI_ETH_CTRL1 0xFD4 +#define MT8195_DLY_RXC_INV BIT(25) +#define MT8195_DLY_RXC_ENABLE BIT(18) +#define MT8195_DLY_RXC_STAGES GENMASK(17, 13) +#define MT8195_DLY_TXC_INV BIT(12) +#define MT8195_DLY_TXC_ENABLE BIT(5) +#define MT8195_DLY_TXC_STAGES GENMASK(4, 0) + +#define MT8195_PERI_ETH_CTRL2 0xFD8 +#define MT8195_DLY_RMII_RXC_INV BIT(25) +#define MT8195_DLY_RMII_RXC_ENABLE BIT(18) +#define MT8195_DLY_RMII_RXC_STAGES GENMASK(17, 13) +#define MT8195_DLY_RMII_TXC_INV BIT(12) +#define MT8195_DLY_RMII_TXC_ENABLE BIT(5) +#define MT8195_DLY_RMII_TXC_STAGES GENMASK(4, 0) + +struct mac_delay_struct { + u32 tx_delay; + u32 rx_delay; + bool tx_inv; + bool rx_inv; +}; + +struct mediatek_dwmac_plat_data { + const struct mediatek_dwmac_variant *variant; + struct mac_delay_struct mac_delay; + struct clk *rmii_internal_clk; + struct clk_bulk_data *clks; + struct regmap *peri_regmap; + struct device_node *np; + struct device *dev; + phy_interface_t phy_mode; + bool rmii_clk_from_mac; + bool rmii_rxc; + bool mac_wol; +}; + +struct mediatek_dwmac_variant { + int (*dwmac_set_phy_interface)(struct mediatek_dwmac_plat_data *plat); + int (*dwmac_set_delay)(struct mediatek_dwmac_plat_data *plat); + + /* clock ids to be requested */ + const char * const *clk_list; + int num_clks; + + u32 dma_bit_mask; + u32 rx_delay_max; + u32 tx_delay_max; +}; + +/* list of clocks required for mac */ +static const char * const mt2712_dwmac_clk_l[] = { + "axi", "apb", "mac_main", "ptp_ref" +}; + +static const char * const mt8195_dwmac_clk_l[] = { + "axi", "apb", "mac_cg", "mac_main", "ptp_ref" +}; + +static int mt2712_set_interface(struct mediatek_dwmac_plat_data *plat) +{ + int rmii_clk_from_mac = plat->rmii_clk_from_mac ? RMII_CLK_SRC_INTERNAL : 0; + int rmii_rxc = plat->rmii_rxc ? RMII_CLK_SRC_RXC : 0; + u32 intf_val = 0; + + /* select phy interface in top control domain */ + switch (plat->phy_mode) { + case PHY_INTERFACE_MODE_MII: + intf_val |= PHY_INTF_MII; + break; + case PHY_INTERFACE_MODE_RMII: + intf_val |= (PHY_INTF_RMII | rmii_rxc | rmii_clk_from_mac); + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + intf_val |= PHY_INTF_RGMII; + break; + default: + dev_err(plat->dev, "phy interface not supported\n"); + return -EINVAL; + } + + regmap_write(plat->peri_regmap, PERI_ETH_PHY_INTF_SEL, intf_val); + + return 0; +} + +static void mt2712_delay_ps2stage(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + + switch (plat->phy_mode) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_RMII: + /* 550ps per stage for MII/RMII */ + mac_delay->tx_delay /= 550; + mac_delay->rx_delay /= 550; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + /* 170ps per stage for RGMII */ + mac_delay->tx_delay /= 170; + mac_delay->rx_delay /= 170; + break; + default: + dev_err(plat->dev, "phy interface not supported\n"); + break; + } +} + +static void mt2712_delay_stage2ps(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + + switch (plat->phy_mode) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_RMII: + /* 550ps per stage for MII/RMII */ + mac_delay->tx_delay *= 550; + mac_delay->rx_delay *= 550; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + /* 170ps per stage for RGMII */ + mac_delay->tx_delay *= 170; + mac_delay->rx_delay *= 170; + break; + default: + dev_err(plat->dev, "phy interface not supported\n"); + break; + } +} + +static int mt2712_set_delay(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + u32 delay_val = 0, fine_val = 0; + + mt2712_delay_ps2stage(plat); + + switch (plat->phy_mode) { + case PHY_INTERFACE_MODE_MII: + delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->tx_inv); + + delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv); + break; + case PHY_INTERFACE_MODE_RMII: + if (plat->rmii_clk_from_mac) { + /* case 1: mac provides the rmii reference clock, + * and the clock output to TXC pin. + * The egress timing can be adjusted by GTXC delay macro circuit. + * The ingress timing can be adjusted by TXC delay macro circuit. + */ + delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->rx_inv); + + delay_val |= FIELD_PREP(ETH_DLY_GTXC_ENABLE, !!mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_GTXC_STAGES, mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_GTXC_INV, mac_delay->tx_inv); + } else { + /* case 2: the rmii reference clock is from external phy, + * and the property "rmii_rxc" indicates which pin(TXC/RXC) + * the reference clk is connected to. The reference clock is a + * received signal, so rx_delay/rx_inv are used to indicate + * the reference clock timing adjustment + */ + if (plat->rmii_rxc) { + /* the rmii reference clock from outside is connected + * to RXC pin, the reference clock will be adjusted + * by RXC delay macro circuit. + */ + delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv); + } else { + /* the rmii reference clock from outside is connected + * to TXC pin, the reference clock will be adjusted + * by TXC delay macro circuit. + */ + delay_val |= FIELD_PREP(ETH_DLY_TXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_TXC_INV, mac_delay->rx_inv); + } + /* tx_inv will inverse the tx clock inside mac relateive to + * reference clock from external phy, + * and this bit is located in the same register with fine-tune + */ + if (mac_delay->tx_inv) + fine_val = ETH_RMII_DLY_TX_INV; + } + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + fine_val = ETH_FINE_DLY_GTXC | ETH_FINE_DLY_RXC; + + delay_val |= FIELD_PREP(ETH_DLY_GTXC_ENABLE, !!mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_GTXC_STAGES, mac_delay->tx_delay); + delay_val |= FIELD_PREP(ETH_DLY_GTXC_INV, mac_delay->tx_inv); + + delay_val |= FIELD_PREP(ETH_DLY_RXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(ETH_DLY_RXC_INV, mac_delay->rx_inv); + break; + default: + dev_err(plat->dev, "phy interface not supported\n"); + return -EINVAL; + } + regmap_write(plat->peri_regmap, PERI_ETH_DLY, delay_val); + regmap_write(plat->peri_regmap, PERI_ETH_DLY_FINE, fine_val); + + mt2712_delay_stage2ps(plat); + + return 0; +} + +static const struct mediatek_dwmac_variant mt2712_gmac_variant = { + .dwmac_set_phy_interface = mt2712_set_interface, + .dwmac_set_delay = mt2712_set_delay, + .clk_list = mt2712_dwmac_clk_l, + .num_clks = ARRAY_SIZE(mt2712_dwmac_clk_l), + .dma_bit_mask = 33, + .rx_delay_max = 17600, + .tx_delay_max = 17600, +}; + +static int mt8195_set_interface(struct mediatek_dwmac_plat_data *plat) +{ + int rmii_clk_from_mac = plat->rmii_clk_from_mac ? MT8195_RMII_CLK_SRC_INTERNAL : 0; + int rmii_rxc = plat->rmii_rxc ? MT8195_RMII_CLK_SRC_RXC : 0; + u32 intf_val = 0; + + /* select phy interface in top control domain */ + switch (plat->phy_mode) { + case PHY_INTERFACE_MODE_MII: + intf_val |= FIELD_PREP(MT8195_ETH_INTF_SEL, PHY_INTF_MII); + break; + case PHY_INTERFACE_MODE_RMII: + intf_val |= (rmii_rxc | rmii_clk_from_mac); + intf_val |= FIELD_PREP(MT8195_ETH_INTF_SEL, PHY_INTF_RMII); + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + intf_val |= FIELD_PREP(MT8195_ETH_INTF_SEL, PHY_INTF_RGMII); + break; + default: + dev_err(plat->dev, "phy interface not supported\n"); + return -EINVAL; + } + + /* MT8195 only support external PHY */ + intf_val |= MT8195_EXT_PHY_MODE; + + regmap_write(plat->peri_regmap, MT8195_PERI_ETH_CTRL0, intf_val); + + return 0; +} + +static void mt8195_delay_ps2stage(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + + /* 290ps per stage */ + mac_delay->tx_delay /= 290; + mac_delay->rx_delay /= 290; +} + +static void mt8195_delay_stage2ps(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + + /* 290ps per stage */ + mac_delay->tx_delay *= 290; + mac_delay->rx_delay *= 290; +} + +static int mt8195_set_delay(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + u32 gtxc_delay_val = 0, delay_val = 0, rmii_delay_val = 0; + + mt8195_delay_ps2stage(plat); + + switch (plat->phy_mode) { + case PHY_INTERFACE_MODE_MII: + delay_val |= FIELD_PREP(MT8195_DLY_TXC_ENABLE, !!mac_delay->tx_delay); + delay_val |= FIELD_PREP(MT8195_DLY_TXC_STAGES, mac_delay->tx_delay); + delay_val |= FIELD_PREP(MT8195_DLY_TXC_INV, mac_delay->tx_inv); + + delay_val |= FIELD_PREP(MT8195_DLY_RXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(MT8195_DLY_RXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(MT8195_DLY_RXC_INV, mac_delay->rx_inv); + break; + case PHY_INTERFACE_MODE_RMII: + if (plat->rmii_clk_from_mac) { + /* case 1: mac provides the rmii reference clock, + * and the clock output to TXC pin. + * The egress timing can be adjusted by RMII_TXC delay macro circuit. + * The ingress timing can be adjusted by RMII_RXC delay macro circuit. + */ + rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_TXC_ENABLE, + !!mac_delay->tx_delay); + rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_TXC_STAGES, + mac_delay->tx_delay); + rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_TXC_INV, + mac_delay->tx_inv); + + rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_RXC_ENABLE, + !!mac_delay->rx_delay); + rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_RXC_STAGES, + mac_delay->rx_delay); + rmii_delay_val |= FIELD_PREP(MT8195_DLY_RMII_RXC_INV, + mac_delay->rx_inv); + } else { + /* case 2: the rmii reference clock is from external phy, + * and the property "rmii_rxc" indicates which pin(TXC/RXC) + * the reference clk is connected to. The reference clock is a + * received signal, so rx_delay/rx_inv are used to indicate + * the reference clock timing adjustment + */ + if (plat->rmii_rxc) { + /* the rmii reference clock from outside is connected + * to RXC pin, the reference clock will be adjusted + * by RXC delay macro circuit. + */ + delay_val |= FIELD_PREP(MT8195_DLY_RXC_ENABLE, + !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(MT8195_DLY_RXC_STAGES, + mac_delay->rx_delay); + delay_val |= FIELD_PREP(MT8195_DLY_RXC_INV, + mac_delay->rx_inv); + } else { + /* the rmii reference clock from outside is connected + * to TXC pin, the reference clock will be adjusted + * by TXC delay macro circuit. + */ + delay_val |= FIELD_PREP(MT8195_DLY_TXC_ENABLE, + !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(MT8195_DLY_TXC_STAGES, + mac_delay->rx_delay); + delay_val |= FIELD_PREP(MT8195_DLY_TXC_INV, + mac_delay->rx_inv); + } + } + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + gtxc_delay_val |= FIELD_PREP(MT8195_DLY_GTXC_ENABLE, !!mac_delay->tx_delay); + gtxc_delay_val |= FIELD_PREP(MT8195_DLY_GTXC_STAGES, mac_delay->tx_delay); + gtxc_delay_val |= FIELD_PREP(MT8195_DLY_GTXC_INV, mac_delay->tx_inv); + + delay_val |= FIELD_PREP(MT8195_DLY_RXC_ENABLE, !!mac_delay->rx_delay); + delay_val |= FIELD_PREP(MT8195_DLY_RXC_STAGES, mac_delay->rx_delay); + delay_val |= FIELD_PREP(MT8195_DLY_RXC_INV, mac_delay->rx_inv); + + break; + default: + dev_err(plat->dev, "phy interface not supported\n"); + return -EINVAL; + } + + regmap_update_bits(plat->peri_regmap, + MT8195_PERI_ETH_CTRL0, + MT8195_RGMII_TXC_PHASE_CTRL | + MT8195_DLY_GTXC_INV | + MT8195_DLY_GTXC_ENABLE | + MT8195_DLY_GTXC_STAGES, + gtxc_delay_val); + regmap_write(plat->peri_regmap, MT8195_PERI_ETH_CTRL1, delay_val); + regmap_write(plat->peri_regmap, MT8195_PERI_ETH_CTRL2, rmii_delay_val); + + mt8195_delay_stage2ps(plat); + + return 0; +} + +static const struct mediatek_dwmac_variant mt8195_gmac_variant = { + .dwmac_set_phy_interface = mt8195_set_interface, + .dwmac_set_delay = mt8195_set_delay, + .clk_list = mt8195_dwmac_clk_l, + .num_clks = ARRAY_SIZE(mt8195_dwmac_clk_l), + .dma_bit_mask = 35, + .rx_delay_max = 9280, + .tx_delay_max = 9280, +}; + +static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat) +{ + struct mac_delay_struct *mac_delay = &plat->mac_delay; + u32 tx_delay_ps, rx_delay_ps; + int err; + + plat->peri_regmap = syscon_regmap_lookup_by_phandle(plat->np, "mediatek,pericfg"); + if (IS_ERR(plat->peri_regmap)) { + dev_err(plat->dev, "Failed to get pericfg syscon\n"); + return PTR_ERR(plat->peri_regmap); + } + + err = of_get_phy_mode(plat->np, &plat->phy_mode); + if (err) { + dev_err(plat->dev, "not find phy-mode\n"); + return err; + } + + if (!of_property_read_u32(plat->np, "mediatek,tx-delay-ps", &tx_delay_ps)) { + if (tx_delay_ps < plat->variant->tx_delay_max) { + mac_delay->tx_delay = tx_delay_ps; + } else { + dev_err(plat->dev, "Invalid TX clock delay: %dps\n", tx_delay_ps); + return -EINVAL; + } + } + + if (!of_property_read_u32(plat->np, "mediatek,rx-delay-ps", &rx_delay_ps)) { + if (rx_delay_ps < plat->variant->rx_delay_max) { + mac_delay->rx_delay = rx_delay_ps; + } else { + dev_err(plat->dev, "Invalid RX clock delay: %dps\n", rx_delay_ps); + return -EINVAL; + } + } + + mac_delay->tx_inv = of_property_read_bool(plat->np, "mediatek,txc-inverse"); + mac_delay->rx_inv = of_property_read_bool(plat->np, "mediatek,rxc-inverse"); + plat->rmii_rxc = of_property_read_bool(plat->np, "mediatek,rmii-rxc"); + plat->rmii_clk_from_mac = of_property_read_bool(plat->np, "mediatek,rmii-clk-from-mac"); + plat->mac_wol = of_property_read_bool(plat->np, "mediatek,mac-wol"); + + return 0; +} + +static int mediatek_dwmac_clk_init(struct mediatek_dwmac_plat_data *plat) +{ + const struct mediatek_dwmac_variant *variant = plat->variant; + int i, ret; + + plat->clks = devm_kcalloc(plat->dev, variant->num_clks, sizeof(*plat->clks), GFP_KERNEL); + if (!plat->clks) + return -ENOMEM; + + for (i = 0; i < variant->num_clks; i++) + plat->clks[i].id = variant->clk_list[i]; + + ret = devm_clk_bulk_get(plat->dev, variant->num_clks, plat->clks); + if (ret) + return ret; + + /* The clock labeled as "rmii_internal" is needed only in RMII(when + * MAC provides the reference clock), and useless for RGMII/MII or + * RMII(when PHY provides the reference clock). + * So, "rmii_internal" clock is got and configured only when + * reference clock of RMII is from MAC. + */ + if (plat->rmii_clk_from_mac) { + plat->rmii_internal_clk = devm_clk_get(plat->dev, "rmii_internal"); + if (IS_ERR(plat->rmii_internal_clk)) + ret = PTR_ERR(plat->rmii_internal_clk); + } else { + plat->rmii_internal_clk = NULL; + } + + return ret; +} + +static int mediatek_dwmac_init(struct platform_device *pdev, void *priv) +{ + struct mediatek_dwmac_plat_data *plat = priv; + const struct mediatek_dwmac_variant *variant = plat->variant; + int ret; + + if (variant->dwmac_set_phy_interface) { + ret = variant->dwmac_set_phy_interface(plat); + if (ret) { + dev_err(plat->dev, "failed to set phy interface, err = %d\n", ret); + return ret; + } + } + + if (variant->dwmac_set_delay) { + ret = variant->dwmac_set_delay(plat); + if (ret) { + dev_err(plat->dev, "failed to set delay value, err = %d\n", ret); + return ret; + } + } + + return 0; +} + +static int mediatek_dwmac_clks_config(void *priv, bool enabled) +{ + struct mediatek_dwmac_plat_data *plat = priv; + const struct mediatek_dwmac_variant *variant = plat->variant; + int ret = 0; + + if (enabled) { + ret = clk_bulk_prepare_enable(variant->num_clks, plat->clks); + if (ret) { + dev_err(plat->dev, "failed to enable clks, err = %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(plat->rmii_internal_clk); + if (ret) { + dev_err(plat->dev, "failed to enable rmii internal clk, err = %d\n", ret); + return ret; + } + } else { + clk_disable_unprepare(plat->rmii_internal_clk); + clk_bulk_disable_unprepare(variant->num_clks, plat->clks); + } + + return ret; +} + +static int mediatek_dwmac_common_data(struct platform_device *pdev, + struct plat_stmmacenet_data *plat, + struct mediatek_dwmac_plat_data *priv_plat) +{ + int i; + + plat->interface = priv_plat->phy_mode; + plat->use_phy_wol = priv_plat->mac_wol ? 0 : 1; + plat->riwt_off = 1; + plat->maxmtu = ETH_DATA_LEN; + plat->host_dma_width = priv_plat->variant->dma_bit_mask; + plat->bsp_priv = priv_plat; + plat->init = mediatek_dwmac_init; + plat->clks_config = mediatek_dwmac_clks_config; + + plat->safety_feat_cfg = devm_kzalloc(&pdev->dev, + sizeof(*plat->safety_feat_cfg), + GFP_KERNEL); + if (!plat->safety_feat_cfg) + return -ENOMEM; + + plat->safety_feat_cfg->tsoee = 1; + plat->safety_feat_cfg->mrxpee = 0; + plat->safety_feat_cfg->mestee = 1; + plat->safety_feat_cfg->mrxee = 1; + plat->safety_feat_cfg->mtxee = 1; + plat->safety_feat_cfg->epsi = 0; + plat->safety_feat_cfg->edpp = 1; + plat->safety_feat_cfg->prtyen = 1; + plat->safety_feat_cfg->tmouten = 1; + + for (i = 0; i < plat->tx_queues_to_use; i++) { + /* Default TX Q0 to use TSO and rest TXQ for TBS */ + if (i > 0) + plat->tx_queues_cfg[i].tbs_en = 1; + } + + return 0; +} + +static int mediatek_dwmac_probe(struct platform_device *pdev) +{ + struct mediatek_dwmac_plat_data *priv_plat; + struct plat_stmmacenet_data *plat_dat; + struct stmmac_resources stmmac_res; + int ret; + + priv_plat = devm_kzalloc(&pdev->dev, sizeof(*priv_plat), GFP_KERNEL); + if (!priv_plat) + return -ENOMEM; + + priv_plat->variant = of_device_get_match_data(&pdev->dev); + if (!priv_plat->variant) { + dev_err(&pdev->dev, "Missing dwmac-mediatek variant\n"); + return -EINVAL; + } + + priv_plat->dev = &pdev->dev; + priv_plat->np = pdev->dev.of_node; + + ret = mediatek_dwmac_config_dt(priv_plat); + if (ret) + return ret; + + ret = mediatek_dwmac_clk_init(priv_plat); + if (ret) + return ret; + + ret = stmmac_get_platform_resources(pdev, &stmmac_res); + if (ret) + return ret; + + plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + + mediatek_dwmac_common_data(pdev, plat_dat, priv_plat); + mediatek_dwmac_init(pdev, priv_plat); + + ret = mediatek_dwmac_clks_config(priv_plat, true); + if (ret) + goto err_remove_config_dt; + + ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); + if (ret) + goto err_drv_probe; + + return 0; + +err_drv_probe: + mediatek_dwmac_clks_config(priv_plat, false); +err_remove_config_dt: + stmmac_remove_config_dt(pdev, plat_dat); + + return ret; +} + +static int mediatek_dwmac_remove(struct platform_device *pdev) +{ + struct mediatek_dwmac_plat_data *priv_plat = get_stmmac_bsp_priv(&pdev->dev); + int ret; + + ret = stmmac_pltfr_remove(pdev); + mediatek_dwmac_clks_config(priv_plat, false); + + return ret; +} + +static const struct of_device_id mediatek_dwmac_match[] = { + { .compatible = "mediatek,mt2712-gmac", + .data = &mt2712_gmac_variant }, + { .compatible = "mediatek,mt8195-gmac", + .data = &mt8195_gmac_variant }, + { } +}; + +MODULE_DEVICE_TABLE(of, mediatek_dwmac_match); + +static struct platform_driver mediatek_dwmac_driver = { + .probe = mediatek_dwmac_probe, + .remove = mediatek_dwmac_remove, + .driver = { + .name = "dwmac-mediatek", + .pm = &stmmac_pltfr_pm_ops, + .of_match_table = mediatek_dwmac_match, + }, +}; +module_platform_driver(mediatek_dwmac_driver); + +MODULE_AUTHOR("Biao Huang <biao.huang@mediatek.com>"); +MODULE_DESCRIPTION("MediaTek DWMAC specific glue layer"); +MODULE_LICENSE("GPL v2"); |