diff options
Diffstat (limited to 'drivers/net/mdio/mdio-ipq4019.c')
| -rw-r--r-- | drivers/net/mdio/mdio-ipq4019.c | 284 |
1 files changed, 284 insertions, 0 deletions
diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c new file mode 100644 index 000000000..4eba5a910 --- /dev/null +++ b/drivers/net/mdio/mdio-ipq4019.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. */ +/* Copyright (c) 2020 Sartura Ltd. */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_mdio.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/clk.h> + +#define MDIO_MODE_REG 0x40 +#define MDIO_ADDR_REG 0x44 +#define MDIO_DATA_WRITE_REG 0x48 +#define MDIO_DATA_READ_REG 0x4c +#define MDIO_CMD_REG 0x50 +#define MDIO_CMD_ACCESS_BUSY BIT(16) +#define MDIO_CMD_ACCESS_START BIT(8) +#define MDIO_CMD_ACCESS_CODE_READ 0 +#define MDIO_CMD_ACCESS_CODE_WRITE 1 +#define MDIO_CMD_ACCESS_CODE_C45_ADDR 0 +#define MDIO_CMD_ACCESS_CODE_C45_WRITE 1 +#define MDIO_CMD_ACCESS_CODE_C45_READ 2 + +/* 0 = Clause 22, 1 = Clause 45 */ +#define MDIO_MODE_C45 BIT(8) + +#define IPQ4019_MDIO_TIMEOUT 10000 +#define IPQ4019_MDIO_SLEEP 10 + +/* MDIO clock source frequency is fixed to 100M */ +#define IPQ_MDIO_CLK_RATE 100000000 + +#define IPQ_PHY_SET_DELAY_US 100000 + +struct ipq4019_mdio_data { + void __iomem *membase; + void __iomem *eth_ldo_rdy; + struct clk *mdio_clk; +}; + +static int ipq4019_mdio_wait_busy(struct mii_bus *bus) +{ + struct ipq4019_mdio_data *priv = bus->priv; + unsigned int busy; + + return readl_poll_timeout(priv->membase + MDIO_CMD_REG, busy, + (busy & MDIO_CMD_ACCESS_BUSY) == 0, + IPQ4019_MDIO_SLEEP, IPQ4019_MDIO_TIMEOUT); +} + +static int ipq4019_mdio_read(struct mii_bus *bus, int mii_id, int regnum) +{ + struct ipq4019_mdio_data *priv = bus->priv; + unsigned int data; + unsigned int cmd; + + if (ipq4019_mdio_wait_busy(bus)) + return -ETIMEDOUT; + + /* Clause 45 support */ + if (regnum & MII_ADDR_C45) { + unsigned int mmd = (regnum >> 16) & 0x1F; + unsigned int reg = regnum & 0xFFFF; + + /* Enter Clause 45 mode */ + data = readl(priv->membase + MDIO_MODE_REG); + + data |= MDIO_MODE_C45; + + writel(data, priv->membase + MDIO_MODE_REG); + + /* issue the phy address and mmd */ + writel((mii_id << 8) | mmd, priv->membase + MDIO_ADDR_REG); + + /* issue reg */ + writel(reg, priv->membase + MDIO_DATA_WRITE_REG); + + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_C45_ADDR; + } else { + /* Enter Clause 22 mode */ + data = readl(priv->membase + MDIO_MODE_REG); + + data &= ~MDIO_MODE_C45; + + writel(data, priv->membase + MDIO_MODE_REG); + + /* issue the phy address and reg */ + writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG); + + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_READ; + } + + /* issue read command */ + writel(cmd, priv->membase + MDIO_CMD_REG); + + /* Wait read complete */ + if (ipq4019_mdio_wait_busy(bus)) + return -ETIMEDOUT; + + if (regnum & MII_ADDR_C45) { + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_C45_READ; + + writel(cmd, priv->membase + MDIO_CMD_REG); + + if (ipq4019_mdio_wait_busy(bus)) + return -ETIMEDOUT; + } + + /* Read and return data */ + return readl(priv->membase + MDIO_DATA_READ_REG); +} + +static int ipq4019_mdio_write(struct mii_bus *bus, int mii_id, int regnum, + u16 value) +{ + struct ipq4019_mdio_data *priv = bus->priv; + unsigned int data; + unsigned int cmd; + + if (ipq4019_mdio_wait_busy(bus)) + return -ETIMEDOUT; + + /* Clause 45 support */ + if (regnum & MII_ADDR_C45) { + unsigned int mmd = (regnum >> 16) & 0x1F; + unsigned int reg = regnum & 0xFFFF; + + /* Enter Clause 45 mode */ + data = readl(priv->membase + MDIO_MODE_REG); + + data |= MDIO_MODE_C45; + + writel(data, priv->membase + MDIO_MODE_REG); + + /* issue the phy address and mmd */ + writel((mii_id << 8) | mmd, priv->membase + MDIO_ADDR_REG); + + /* issue reg */ + writel(reg, priv->membase + MDIO_DATA_WRITE_REG); + + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_C45_ADDR; + + writel(cmd, priv->membase + MDIO_CMD_REG); + + if (ipq4019_mdio_wait_busy(bus)) + return -ETIMEDOUT; + } else { + /* Enter Clause 22 mode */ + data = readl(priv->membase + MDIO_MODE_REG); + + data &= ~MDIO_MODE_C45; + + writel(data, priv->membase + MDIO_MODE_REG); + + /* issue the phy address and reg */ + writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG); + } + + /* issue write data */ + writel(value, priv->membase + MDIO_DATA_WRITE_REG); + + /* issue write command */ + if (regnum & MII_ADDR_C45) + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_C45_WRITE; + else + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_WRITE; + + writel(cmd, priv->membase + MDIO_CMD_REG); + + /* Wait write complete */ + if (ipq4019_mdio_wait_busy(bus)) + return -ETIMEDOUT; + + return 0; +} + +static int ipq_mdio_reset(struct mii_bus *bus) +{ + struct ipq4019_mdio_data *priv = bus->priv; + u32 val; + int ret; + + /* To indicate CMN_PLL that ethernet_ldo has been ready if platform resource 1 + * is specified in the device tree. + */ + if (priv->eth_ldo_rdy) { + val = readl(priv->eth_ldo_rdy); + val |= BIT(0); + writel(val, priv->eth_ldo_rdy); + fsleep(IPQ_PHY_SET_DELAY_US); + } + + /* Configure MDIO clock source frequency if clock is specified in the device tree */ + ret = clk_set_rate(priv->mdio_clk, IPQ_MDIO_CLK_RATE); + if (ret) + return ret; + + ret = clk_prepare_enable(priv->mdio_clk); + if (ret == 0) + mdelay(10); + + return ret; +} + +static int ipq4019_mdio_probe(struct platform_device *pdev) +{ + struct ipq4019_mdio_data *priv; + struct mii_bus *bus; + struct resource *res; + int ret; + + bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv)); + if (!bus) + return -ENOMEM; + + priv = bus->priv; + + priv->membase = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->membase)) + return PTR_ERR(priv->membase); + + priv->mdio_clk = devm_clk_get_optional(&pdev->dev, "gcc_mdio_ahb_clk"); + if (IS_ERR(priv->mdio_clk)) + return PTR_ERR(priv->mdio_clk); + + /* The platform resource is provided on the chipset IPQ5018 */ + /* This resource is optional */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res) + priv->eth_ldo_rdy = devm_ioremap_resource(&pdev->dev, res); + + bus->name = "ipq4019_mdio"; + bus->read = ipq4019_mdio_read; + bus->write = ipq4019_mdio_write; + bus->reset = ipq_mdio_reset; + bus->parent = &pdev->dev; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id); + + ret = of_mdiobus_register(bus, pdev->dev.of_node); + if (ret) { + dev_err(&pdev->dev, "Cannot register MDIO bus!\n"); + return ret; + } + + platform_set_drvdata(pdev, bus); + + return 0; +} + +static int ipq4019_mdio_remove(struct platform_device *pdev) +{ + struct mii_bus *bus = platform_get_drvdata(pdev); + + mdiobus_unregister(bus); + + return 0; +} + +static const struct of_device_id ipq4019_mdio_dt_ids[] = { + { .compatible = "qcom,ipq4019-mdio" }, + { .compatible = "qcom,ipq5018-mdio" }, + { } +}; +MODULE_DEVICE_TABLE(of, ipq4019_mdio_dt_ids); + +static struct platform_driver ipq4019_mdio_driver = { + .probe = ipq4019_mdio_probe, + .remove = ipq4019_mdio_remove, + .driver = { + .name = "ipq4019-mdio", + .of_match_table = ipq4019_mdio_dt_ids, + }, +}; + +module_platform_driver(ipq4019_mdio_driver); + +MODULE_DESCRIPTION("ipq4019 MDIO interface driver"); +MODULE_AUTHOR("Qualcomm Atheros"); +MODULE_LICENSE("Dual BSD/GPL"); |