diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/net/phy/lxt.c | 358 |
1 files changed, 358 insertions, 0 deletions
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c new file mode 100644 index 000000000..e3bf827b7 --- /dev/null +++ b/drivers/net/phy/lxt.c @@ -0,0 +1,358 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * drivers/net/phy/lxt.c + * + * Driver for Intel LXT PHYs + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <linux/uaccess.h> + +/* The Level one LXT970 is used by many boards */ + +#define MII_LXT970_IER 17 /* Interrupt Enable Register */ + +#define MII_LXT970_IER_IEN 0x0002 + +#define MII_LXT970_ISR 18 /* Interrupt Status Register */ + +#define MII_LXT970_IRS_MINT BIT(15) + +#define MII_LXT970_CONFIG 19 /* Configuration Register */ + +/* ------------------------------------------------------------------------- */ +/* The Level one LXT971 is used on some of my custom boards */ + +/* register definitions for the 971 */ +#define MII_LXT971_IER 18 /* Interrupt Enable Register */ +#define MII_LXT971_IER_IEN 0x00f2 + +#define MII_LXT971_ISR 19 /* Interrupt Status Register */ +#define MII_LXT971_ISR_MASK 0x00f0 + +/* register definitions for the 973 */ +#define MII_LXT973_PCR 16 /* Port Configuration Register */ +#define PCR_FIBER_SELECT 1 + +MODULE_DESCRIPTION("Intel LXT PHY driver"); +MODULE_AUTHOR("Andy Fleming"); +MODULE_LICENSE("GPL"); + +static int lxt970_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, MII_BMSR); + + if (err < 0) + return err; + + err = phy_read(phydev, MII_LXT970_ISR); + + if (err < 0) + return err; + + return 0; +} + +static int lxt970_config_intr(struct phy_device *phydev) +{ + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = lxt970_ack_interrupt(phydev); + if (err) + return err; + + err = phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN); + } else { + err = phy_write(phydev, MII_LXT970_IER, 0); + if (err) + return err; + + err = lxt970_ack_interrupt(phydev); + } + + return err; +} + +static irqreturn_t lxt970_handle_interrupt(struct phy_device *phydev) +{ + int irq_status; + + /* The interrupt status register is cleared by reading BMSR + * followed by MII_LXT970_ISR + */ + irq_status = phy_read(phydev, MII_BMSR); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + irq_status = phy_read(phydev, MII_LXT970_ISR); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & MII_LXT970_IRS_MINT)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static int lxt970_config_init(struct phy_device *phydev) +{ + return phy_write(phydev, MII_LXT970_CONFIG, 0); +} + + +static int lxt971_ack_interrupt(struct phy_device *phydev) +{ + int err = phy_read(phydev, MII_LXT971_ISR); + + if (err < 0) + return err; + + return 0; +} + +static int lxt971_config_intr(struct phy_device *phydev) +{ + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = lxt971_ack_interrupt(phydev); + if (err) + return err; + + err = phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN); + } else { + err = phy_write(phydev, MII_LXT971_IER, 0); + if (err) + return err; + + err = lxt971_ack_interrupt(phydev); + } + + return err; +} + +static irqreturn_t lxt971_handle_interrupt(struct phy_device *phydev) +{ + int irq_status; + + irq_status = phy_read(phydev, MII_LXT971_ISR); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & MII_LXT971_ISR_MASK)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +/* + * A2 version of LXT973 chip has an ERRATA: it randomly return the contents + * of the previous even register when you read a odd register regularly + */ + +static int lxt973a2_update_link(struct phy_device *phydev) +{ + int status; + int control; + int retry = 8; /* we try 8 times */ + + /* Do a fake read */ + status = phy_read(phydev, MII_BMSR); + + if (status < 0) + return status; + + control = phy_read(phydev, MII_BMCR); + if (control < 0) + return control; + + do { + /* Read link and autonegotiation status */ + status = phy_read(phydev, MII_BMSR); + } while (status >= 0 && retry-- && status == control); + + if (status < 0) + return status; + + if ((status & BMSR_LSTATUS) == 0) + phydev->link = 0; + else + phydev->link = 1; + + return 0; +} + +static int lxt973a2_read_status(struct phy_device *phydev) +{ + int adv; + int err; + int lpa; + + /* Update the link, but return if there was an error */ + err = lxt973a2_update_link(phydev); + if (err) + return err; + + if (AUTONEG_ENABLE == phydev->autoneg) { + int retry = 1; + + adv = phy_read(phydev, MII_ADVERTISE); + + if (adv < 0) + return adv; + + do { + lpa = phy_read(phydev, MII_LPA); + + if (lpa < 0) + return lpa; + + /* If both registers are equal, it is suspect but not + * impossible, hence a new try + */ + } while (lpa == adv && retry--); + + mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, lpa); + + lpa &= adv; + + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + phydev->pause = phydev->asym_pause = 0; + + if (lpa & (LPA_100FULL | LPA_100HALF)) { + phydev->speed = SPEED_100; + + if (lpa & LPA_100FULL) + phydev->duplex = DUPLEX_FULL; + } else { + if (lpa & LPA_10FULL) + phydev->duplex = DUPLEX_FULL; + } + + phy_resolve_aneg_pause(phydev); + } else { + err = genphy_read_status_fixed(phydev); + if (err < 0) + return err; + + phydev->pause = phydev->asym_pause = 0; + linkmode_zero(phydev->lp_advertising); + } + + return 0; +} + +static int lxt973_probe(struct phy_device *phydev) +{ + int val = phy_read(phydev, MII_LXT973_PCR); + + if (val & PCR_FIBER_SELECT) { + /* + * If fiber is selected, then the only correct setting + * is 100Mbps, full duplex, and auto negotiation off. + */ + val = phy_read(phydev, MII_BMCR); + val |= (BMCR_SPEED100 | BMCR_FULLDPLX); + val &= ~BMCR_ANENABLE; + phy_write(phydev, MII_BMCR, val); + /* Remember that the port is in fiber mode. */ + phydev->priv = lxt973_probe; + phydev->port = PORT_FIBRE; + } else { + phydev->priv = NULL; + } + return 0; +} + +static int lxt973_config_aneg(struct phy_device *phydev) +{ + /* Do nothing if port is in fiber mode. */ + return phydev->priv ? 0 : genphy_config_aneg(phydev); +} + +static struct phy_driver lxt97x_driver[] = { +{ + .phy_id = 0x78100000, + .name = "LXT970", + .phy_id_mask = 0xfffffff0, + /* PHY_BASIC_FEATURES */ + .config_init = lxt970_config_init, + .config_intr = lxt970_config_intr, + .handle_interrupt = lxt970_handle_interrupt, +}, { + .phy_id = 0x001378e0, + .name = "LXT971", + .phy_id_mask = 0xfffffff0, + /* PHY_BASIC_FEATURES */ + .config_intr = lxt971_config_intr, + .handle_interrupt = lxt971_handle_interrupt, + .suspend = genphy_suspend, + .resume = genphy_resume, +}, { + .phy_id = 0x00137a10, + .name = "LXT973-A2", + .phy_id_mask = 0xffffffff, + /* PHY_BASIC_FEATURES */ + .flags = 0, + .probe = lxt973_probe, + .config_aneg = lxt973_config_aneg, + .read_status = lxt973a2_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, +}, { + .phy_id = 0x00137a10, + .name = "LXT973", + .phy_id_mask = 0xfffffff0, + /* PHY_BASIC_FEATURES */ + .flags = 0, + .probe = lxt973_probe, + .config_aneg = lxt973_config_aneg, + .suspend = genphy_suspend, + .resume = genphy_resume, +} }; + +module_phy_driver(lxt97x_driver); + +static struct mdio_device_id __maybe_unused lxt_tbl[] = { + { 0x78100000, 0xfffffff0 }, + { 0x001378e0, 0xfffffff0 }, + { 0x00137a10, 0xfffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, lxt_tbl); |