diff options
Diffstat (limited to 'drivers/net/phy/realtek.c')
| -rw-r--r-- | drivers/net/phy/realtek.c | 1064 |
1 files changed, 1064 insertions, 0 deletions
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c new file mode 100644 index 000000000..3d99fd666 --- /dev/null +++ b/drivers/net/phy/realtek.c @@ -0,0 +1,1064 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* drivers/net/phy/realtek.c + * + * Driver for Realtek PHYs + * + * Author: Johnson Leung <r58129@freescale.com> + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + */ +#include <linux/bitops.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/module.h> +#include <linux/delay.h> + +#define RTL821x_PHYSR 0x11 +#define RTL821x_PHYSR_DUPLEX BIT(13) +#define RTL821x_PHYSR_SPEED GENMASK(15, 14) + +#define RTL821x_INER 0x12 +#define RTL8211B_INER_INIT 0x6400 +#define RTL8211E_INER_LINK_STATUS BIT(10) +#define RTL8211F_INER_LINK_STATUS BIT(4) + +#define RTL821x_INSR 0x13 + +#define RTL821x_EXT_PAGE_SELECT 0x1e +#define RTL821x_PAGE_SELECT 0x1f + +#define RTL8211F_PHYCR1 0x18 +#define RTL8211F_PHYCR2 0x19 +#define RTL8211F_INSR 0x1d + +#define RTL8211F_TX_DELAY BIT(8) +#define RTL8211F_RX_DELAY BIT(3) + +#define RTL8211F_ALDPS_PLL_OFF BIT(1) +#define RTL8211F_ALDPS_ENABLE BIT(2) +#define RTL8211F_ALDPS_XTAL_OFF BIT(12) + +#define RTL8211E_CTRL_DELAY BIT(13) +#define RTL8211E_TX_DELAY BIT(12) +#define RTL8211E_RX_DELAY BIT(11) + +#define RTL8211F_CLKOUT_EN BIT(0) + +#define RTL8201F_ISR 0x1e +#define RTL8201F_ISR_ANERR BIT(15) +#define RTL8201F_ISR_DUPLEX BIT(13) +#define RTL8201F_ISR_LINK BIT(11) +#define RTL8201F_ISR_MASK (RTL8201F_ISR_ANERR | \ + RTL8201F_ISR_DUPLEX | \ + RTL8201F_ISR_LINK) +#define RTL8201F_IER 0x13 + +#define RTL8366RB_POWER_SAVE 0x15 +#define RTL8366RB_POWER_SAVE_ON BIT(12) + +#define RTL_SUPPORTS_5000FULL BIT(14) +#define RTL_SUPPORTS_2500FULL BIT(13) +#define RTL_SUPPORTS_10000FULL BIT(0) +#define RTL_ADV_2500FULL BIT(7) +#define RTL_LPADV_10000FULL BIT(11) +#define RTL_LPADV_5000FULL BIT(6) +#define RTL_LPADV_2500FULL BIT(5) + +#define RTL9000A_GINMR 0x14 +#define RTL9000A_GINMR_LINK_STATUS BIT(4) + +#define RTLGEN_SPEED_MASK 0x0630 + +#define RTL_GENERIC_PHYID 0x001cc800 +#define RTL_8211FVD_PHYID 0x001cc878 + +MODULE_DESCRIPTION("Realtek PHY driver"); +MODULE_AUTHOR("Johnson Leung"); +MODULE_LICENSE("GPL"); + +struct rtl821x_priv { + u16 phycr1; + u16 phycr2; + bool has_phycr2; +}; + +static int rtl821x_read_page(struct phy_device *phydev) +{ + return __phy_read(phydev, RTL821x_PAGE_SELECT); +} + +static int rtl821x_write_page(struct phy_device *phydev, int page) +{ + return __phy_write(phydev, RTL821x_PAGE_SELECT, page); +} + +static int rtl821x_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct rtl821x_priv *priv; + u32 phy_id = phydev->drv->phy_id; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR1); + if (ret < 0) + return ret; + + priv->phycr1 = ret & (RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF); + if (of_property_read_bool(dev->of_node, "realtek,aldps-enable")) + priv->phycr1 |= RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF; + + priv->has_phycr2 = !(phy_id == RTL_8211FVD_PHYID); + if (priv->has_phycr2) { + ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR2); + if (ret < 0) + return ret; + + priv->phycr2 = ret & RTL8211F_CLKOUT_EN; + if (of_property_read_bool(dev->of_node, "realtek,clkout-disable")) + priv->phycr2 &= ~RTL8211F_CLKOUT_EN; + } + + phydev->priv = priv; + + return 0; +} + +static int rtl8201_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, RTL8201F_ISR); + + return (err < 0) ? err : 0; +} + +static int rtl821x_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, RTL821x_INSR); + + return (err < 0) ? err : 0; +} + +static int rtl8211f_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read_paged(phydev, 0xa43, RTL8211F_INSR); + + return (err < 0) ? err : 0; +} + +static int rtl8201_config_intr(struct phy_device *phydev) +{ + u16 val; + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = rtl8201_ack_interrupt(phydev); + if (err) + return err; + + val = BIT(13) | BIT(12) | BIT(11); + err = phy_write_paged(phydev, 0x7, RTL8201F_IER, val); + } else { + val = 0; + err = phy_write_paged(phydev, 0x7, RTL8201F_IER, val); + if (err) + return err; + + err = rtl8201_ack_interrupt(phydev); + } + + return err; +} + +static int rtl8211b_config_intr(struct phy_device *phydev) +{ + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = rtl821x_ack_interrupt(phydev); + if (err) + return err; + + err = phy_write(phydev, RTL821x_INER, + RTL8211B_INER_INIT); + } else { + err = phy_write(phydev, RTL821x_INER, 0); + if (err) + return err; + + err = rtl821x_ack_interrupt(phydev); + } + + return err; +} + +static int rtl8211e_config_intr(struct phy_device *phydev) +{ + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = rtl821x_ack_interrupt(phydev); + if (err) + return err; + + err = phy_write(phydev, RTL821x_INER, + RTL8211E_INER_LINK_STATUS); + } else { + err = phy_write(phydev, RTL821x_INER, 0); + if (err) + return err; + + err = rtl821x_ack_interrupt(phydev); + } + + return err; +} + +static int rtl8211f_config_intr(struct phy_device *phydev) +{ + u16 val; + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = rtl8211f_ack_interrupt(phydev); + if (err) + return err; + + val = RTL8211F_INER_LINK_STATUS; + err = phy_write_paged(phydev, 0xa42, RTL821x_INER, val); + } else { + val = 0; + err = phy_write_paged(phydev, 0xa42, RTL821x_INER, val); + if (err) + return err; + + err = rtl8211f_ack_interrupt(phydev); + } + + return err; +} + +static irqreturn_t rtl8201_handle_interrupt(struct phy_device *phydev) +{ + int irq_status; + + irq_status = phy_read(phydev, RTL8201F_ISR); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & RTL8201F_ISR_MASK)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static irqreturn_t rtl821x_handle_interrupt(struct phy_device *phydev) +{ + int irq_status, irq_enabled; + + irq_status = phy_read(phydev, RTL821x_INSR); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + irq_enabled = phy_read(phydev, RTL821x_INER); + if (irq_enabled < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & irq_enabled)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static irqreturn_t rtl8211f_handle_interrupt(struct phy_device *phydev) +{ + int irq_status; + + irq_status = phy_read_paged(phydev, 0xa43, RTL8211F_INSR); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & RTL8211F_INER_LINK_STATUS)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static int rtl8211_config_aneg(struct phy_device *phydev) +{ + int ret; + + ret = genphy_config_aneg(phydev); + if (ret < 0) + return ret; + + /* Quirk was copied from vendor driver. Unfortunately it includes no + * description of the magic numbers. + */ + if (phydev->speed == SPEED_100 && phydev->autoneg == AUTONEG_DISABLE) { + phy_write(phydev, 0x17, 0x2138); + phy_write(phydev, 0x0e, 0x0260); + } else { + phy_write(phydev, 0x17, 0x2108); + phy_write(phydev, 0x0e, 0x0000); + } + + return 0; +} + +static int rtl8211c_config_init(struct phy_device *phydev) +{ + /* RTL8211C has an issue when operating in Gigabit slave mode */ + return phy_set_bits(phydev, MII_CTRL1000, + CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER); +} + +static int rtl8211f_config_init(struct phy_device *phydev) +{ + struct rtl821x_priv *priv = phydev->priv; + struct device *dev = &phydev->mdio.dev; + u16 val_txdly, val_rxdly; + int ret; + + ret = phy_modify_paged_changed(phydev, 0xa43, RTL8211F_PHYCR1, + RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF, + priv->phycr1); + if (ret < 0) { + dev_err(dev, "aldps mode configuration failed: %pe\n", + ERR_PTR(ret)); + return ret; + } + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + val_txdly = 0; + val_rxdly = 0; + break; + + case PHY_INTERFACE_MODE_RGMII_RXID: + val_txdly = 0; + val_rxdly = RTL8211F_RX_DELAY; + break; + + case PHY_INTERFACE_MODE_RGMII_TXID: + val_txdly = RTL8211F_TX_DELAY; + val_rxdly = 0; + break; + + case PHY_INTERFACE_MODE_RGMII_ID: + val_txdly = RTL8211F_TX_DELAY; + val_rxdly = RTL8211F_RX_DELAY; + break; + + default: /* the rest of the modes imply leaving delay as is. */ + return 0; + } + + ret = phy_modify_paged_changed(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, + val_txdly); + if (ret < 0) { + dev_err(dev, "Failed to update the TX delay register\n"); + return ret; + } else if (ret) { + dev_dbg(dev, + "%s 2ns TX delay (and changing the value from pin-strapping RXD1 or the bootloader)\n", + val_txdly ? "Enabling" : "Disabling"); + } else { + dev_dbg(dev, + "2ns TX delay was already %s (by pin-strapping RXD1 or bootloader configuration)\n", + val_txdly ? "enabled" : "disabled"); + } + + ret = phy_modify_paged_changed(phydev, 0xd08, 0x15, RTL8211F_RX_DELAY, + val_rxdly); + if (ret < 0) { + dev_err(dev, "Failed to update the RX delay register\n"); + return ret; + } else if (ret) { + dev_dbg(dev, + "%s 2ns RX delay (and changing the value from pin-strapping RXD0 or the bootloader)\n", + val_rxdly ? "Enabling" : "Disabling"); + } else { + dev_dbg(dev, + "2ns RX delay was already %s (by pin-strapping RXD0 or bootloader configuration)\n", + val_rxdly ? "enabled" : "disabled"); + } + + if (priv->has_phycr2) { + ret = phy_modify_paged(phydev, 0xa43, RTL8211F_PHYCR2, + RTL8211F_CLKOUT_EN, priv->phycr2); + if (ret < 0) { + dev_err(dev, "clkout configuration failed: %pe\n", + ERR_PTR(ret)); + return ret; + } + } + + return genphy_soft_reset(phydev); +} + +static int rtl821x_resume(struct phy_device *phydev) +{ + int ret; + + ret = genphy_resume(phydev); + if (ret < 0) + return ret; + + msleep(20); + + return 0; +} + +static int rtl8211e_config_init(struct phy_device *phydev) +{ + int ret = 0, oldpage; + u16 val; + + /* enable TX/RX delay for rgmii-* modes, and disable them for rgmii. */ + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + val = RTL8211E_CTRL_DELAY | 0; + break; + case PHY_INTERFACE_MODE_RGMII_ID: + val = RTL8211E_CTRL_DELAY | RTL8211E_TX_DELAY | RTL8211E_RX_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + val = RTL8211E_CTRL_DELAY | RTL8211E_RX_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + val = RTL8211E_CTRL_DELAY | RTL8211E_TX_DELAY; + break; + default: /* the rest of the modes imply leaving delays as is. */ + return 0; + } + + /* According to a sample driver there is a 0x1c config register on the + * 0xa4 extension page (0x7) layout. It can be used to disable/enable + * the RX/TX delays otherwise controlled by RXDLY/TXDLY pins. + * The configuration register definition: + * 14 = reserved + * 13 = Force Tx RX Delay controlled by bit12 bit11, + * 12 = RX Delay, 11 = TX Delay + * 10:0 = Test && debug settings reserved by realtek + */ + oldpage = phy_select_page(phydev, 0x7); + if (oldpage < 0) + goto err_restore_page; + + ret = __phy_write(phydev, RTL821x_EXT_PAGE_SELECT, 0xa4); + if (ret) + goto err_restore_page; + + ret = __phy_modify(phydev, 0x1c, RTL8211E_CTRL_DELAY + | RTL8211E_TX_DELAY | RTL8211E_RX_DELAY, + val); + +err_restore_page: + return phy_restore_page(phydev, oldpage, ret); +} + +static int rtl8211b_suspend(struct phy_device *phydev) +{ + phy_write(phydev, MII_MMD_DATA, BIT(9)); + + return genphy_suspend(phydev); +} + +static int rtl8211b_resume(struct phy_device *phydev) +{ + phy_write(phydev, MII_MMD_DATA, 0); + + return genphy_resume(phydev); +} + +static int rtl8366rb_config_init(struct phy_device *phydev) +{ + int ret; + + ret = phy_set_bits(phydev, RTL8366RB_POWER_SAVE, + RTL8366RB_POWER_SAVE_ON); + if (ret) { + dev_err(&phydev->mdio.dev, + "error enabling power management\n"); + } + + return ret; +} + +/* get actual speed to cover the downshift case */ +static int rtlgen_get_speed(struct phy_device *phydev) +{ + int val; + + if (!phydev->link) + return 0; + + val = phy_read_paged(phydev, 0xa43, 0x12); + if (val < 0) + return val; + + switch (val & RTLGEN_SPEED_MASK) { + case 0x0000: + phydev->speed = SPEED_10; + break; + case 0x0010: + phydev->speed = SPEED_100; + break; + case 0x0020: + phydev->speed = SPEED_1000; + break; + case 0x0200: + phydev->speed = SPEED_10000; + break; + case 0x0210: + phydev->speed = SPEED_2500; + break; + case 0x0220: + phydev->speed = SPEED_5000; + break; + default: + break; + } + + return 0; +} + +static int rtlgen_read_status(struct phy_device *phydev) +{ + int ret; + + ret = genphy_read_status(phydev); + if (ret < 0) + return ret; + + return rtlgen_get_speed(phydev); +} + +static int rtlgen_read_mmd(struct phy_device *phydev, int devnum, u16 regnum) +{ + int ret; + + if (devnum == MDIO_MMD_PCS && regnum == MDIO_PCS_EEE_ABLE) { + rtl821x_write_page(phydev, 0xa5c); + ret = __phy_read(phydev, 0x12); + rtl821x_write_page(phydev, 0); + } else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV) { + rtl821x_write_page(phydev, 0xa5d); + ret = __phy_read(phydev, 0x10); + rtl821x_write_page(phydev, 0); + } else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_LPABLE) { + rtl821x_write_page(phydev, 0xa5d); + ret = __phy_read(phydev, 0x11); + rtl821x_write_page(phydev, 0); + } else { + ret = -EOPNOTSUPP; + } + + return ret; +} + +static int rtlgen_write_mmd(struct phy_device *phydev, int devnum, u16 regnum, + u16 val) +{ + int ret; + + if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV) { + rtl821x_write_page(phydev, 0xa5d); + ret = __phy_write(phydev, 0x10, val); + rtl821x_write_page(phydev, 0); + } else { + ret = -EOPNOTSUPP; + } + + return ret; +} + +static int rtl822x_read_mmd(struct phy_device *phydev, int devnum, u16 regnum) +{ + int ret = rtlgen_read_mmd(phydev, devnum, regnum); + + if (ret != -EOPNOTSUPP) + return ret; + + if (devnum == MDIO_MMD_PCS && regnum == MDIO_PCS_EEE_ABLE2) { + rtl821x_write_page(phydev, 0xa6e); + ret = __phy_read(phydev, 0x16); + rtl821x_write_page(phydev, 0); + } else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV2) { + rtl821x_write_page(phydev, 0xa6d); + ret = __phy_read(phydev, 0x12); + rtl821x_write_page(phydev, 0); + } else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_LPABLE2) { + rtl821x_write_page(phydev, 0xa6d); + ret = __phy_read(phydev, 0x10); + rtl821x_write_page(phydev, 0); + } + + return ret; +} + +static int rtl822x_write_mmd(struct phy_device *phydev, int devnum, u16 regnum, + u16 val) +{ + int ret = rtlgen_write_mmd(phydev, devnum, regnum, val); + + if (ret != -EOPNOTSUPP) + return ret; + + if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV2) { + rtl821x_write_page(phydev, 0xa6d); + ret = __phy_write(phydev, 0x12, val); + rtl821x_write_page(phydev, 0); + } + + return ret; +} + +static int rtl822x_get_features(struct phy_device *phydev) +{ + int val; + + val = phy_read_paged(phydev, 0xa61, 0x13); + if (val < 0) + return val; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->supported, val & RTL_SUPPORTS_2500FULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + phydev->supported, val & RTL_SUPPORTS_5000FULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, + phydev->supported, val & RTL_SUPPORTS_10000FULL); + + return genphy_read_abilities(phydev); +} + +static int rtl822x_config_aneg(struct phy_device *phydev) +{ + int ret = 0; + + if (phydev->autoneg == AUTONEG_ENABLE) { + u16 adv2500 = 0; + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->advertising)) + adv2500 = RTL_ADV_2500FULL; + + ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12, + RTL_ADV_2500FULL, adv2500); + if (ret < 0) + return ret; + } + + return __genphy_config_aneg(phydev, ret); +} + +static int rtl822x_read_status(struct phy_device *phydev) +{ + int ret; + + if (phydev->autoneg == AUTONEG_ENABLE) { + int lpadv = phy_read_paged(phydev, 0xa5d, 0x13); + + if (lpadv < 0) + return lpadv; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, + phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL); + } + + ret = genphy_read_status(phydev); + if (ret < 0) + return ret; + + return rtlgen_get_speed(phydev); +} + +static bool rtlgen_supports_2_5gbps(struct phy_device *phydev) +{ + int val; + + phy_write(phydev, RTL821x_PAGE_SELECT, 0xa61); + val = phy_read(phydev, 0x13); + phy_write(phydev, RTL821x_PAGE_SELECT, 0); + + return val >= 0 && val & RTL_SUPPORTS_2500FULL; +} + +static int rtlgen_match_phy_device(struct phy_device *phydev) +{ + return phydev->phy_id == RTL_GENERIC_PHYID && + !rtlgen_supports_2_5gbps(phydev); +} + +static int rtl8226_match_phy_device(struct phy_device *phydev) +{ + return phydev->phy_id == RTL_GENERIC_PHYID && + rtlgen_supports_2_5gbps(phydev); +} + +static int rtlgen_resume(struct phy_device *phydev) +{ + int ret = genphy_resume(phydev); + + /* Internal PHY's from RTL8168h up may not be instantly ready */ + msleep(20); + + return ret; +} + +static int rtl9000a_config_init(struct phy_device *phydev) +{ + phydev->autoneg = AUTONEG_DISABLE; + phydev->speed = SPEED_100; + phydev->duplex = DUPLEX_FULL; + + return 0; +} + +static int rtl9000a_config_aneg(struct phy_device *phydev) +{ + int ret; + u16 ctl = 0; + + switch (phydev->master_slave_set) { + case MASTER_SLAVE_CFG_MASTER_FORCE: + ctl |= CTL1000_AS_MASTER; + break; + case MASTER_SLAVE_CFG_SLAVE_FORCE: + break; + case MASTER_SLAVE_CFG_UNKNOWN: + case MASTER_SLAVE_CFG_UNSUPPORTED: + return 0; + default: + phydev_warn(phydev, "Unsupported Master/Slave mode\n"); + return -EOPNOTSUPP; + } + + ret = phy_modify_changed(phydev, MII_CTRL1000, CTL1000_AS_MASTER, ctl); + if (ret == 1) + ret = genphy_soft_reset(phydev); + + return ret; +} + +static int rtl9000a_read_status(struct phy_device *phydev) +{ + int ret; + + phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN; + phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN; + + ret = genphy_update_link(phydev); + if (ret) + return ret; + + ret = phy_read(phydev, MII_CTRL1000); + if (ret < 0) + return ret; + if (ret & CTL1000_AS_MASTER) + phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE; + else + phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE; + + ret = phy_read(phydev, MII_STAT1000); + if (ret < 0) + return ret; + if (ret & LPA_1000MSRES) + phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER; + else + phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE; + + return 0; +} + +static int rtl9000a_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, RTL8211F_INSR); + + return (err < 0) ? err : 0; +} + +static int rtl9000a_config_intr(struct phy_device *phydev) +{ + u16 val; + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + err = rtl9000a_ack_interrupt(phydev); + if (err) + return err; + + val = (u16)~RTL9000A_GINMR_LINK_STATUS; + err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val); + } else { + val = ~0; + err = phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val); + if (err) + return err; + + err = rtl9000a_ack_interrupt(phydev); + } + + return phy_write_paged(phydev, 0xa42, RTL9000A_GINMR, val); +} + +static irqreturn_t rtl9000a_handle_interrupt(struct phy_device *phydev) +{ + int irq_status; + + irq_status = phy_read(phydev, RTL8211F_INSR); + if (irq_status < 0) { + phy_error(phydev); + return IRQ_NONE; + } + + if (!(irq_status & RTL8211F_INER_LINK_STATUS)) + return IRQ_NONE; + + phy_trigger_machine(phydev); + + return IRQ_HANDLED; +} + +static struct phy_driver realtek_drvs[] = { + { + PHY_ID_MATCH_EXACT(0x00008201), + .name = "RTL8201CP Ethernet", + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc816), + .name = "RTL8201F Fast Ethernet", + .config_intr = &rtl8201_config_intr, + .handle_interrupt = rtl8201_handle_interrupt, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_MODEL(0x001cc880), + .name = "RTL8208 Fast Ethernet", + .read_mmd = genphy_read_mmd_unsupported, + .write_mmd = genphy_write_mmd_unsupported, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc910), + .name = "RTL8211 Gigabit Ethernet", + .config_aneg = rtl8211_config_aneg, + .read_mmd = &genphy_read_mmd_unsupported, + .write_mmd = &genphy_write_mmd_unsupported, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc912), + .name = "RTL8211B Gigabit Ethernet", + .config_intr = &rtl8211b_config_intr, + .handle_interrupt = rtl821x_handle_interrupt, + .read_mmd = &genphy_read_mmd_unsupported, + .write_mmd = &genphy_write_mmd_unsupported, + .suspend = rtl8211b_suspend, + .resume = rtl8211b_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc913), + .name = "RTL8211C Gigabit Ethernet", + .config_init = rtl8211c_config_init, + .read_mmd = &genphy_read_mmd_unsupported, + .write_mmd = &genphy_write_mmd_unsupported, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc914), + .name = "RTL8211DN Gigabit Ethernet", + .config_intr = rtl8211e_config_intr, + .handle_interrupt = rtl821x_handle_interrupt, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc915), + .name = "RTL8211E Gigabit Ethernet", + .config_init = &rtl8211e_config_init, + .config_intr = &rtl8211e_config_intr, + .handle_interrupt = rtl821x_handle_interrupt, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc916), + .name = "RTL8211F Gigabit Ethernet", + .probe = rtl821x_probe, + .config_init = &rtl8211f_config_init, + .read_status = rtlgen_read_status, + .config_intr = &rtl8211f_config_intr, + .handle_interrupt = rtl8211f_handle_interrupt, + .suspend = genphy_suspend, + .resume = rtl821x_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(RTL_8211FVD_PHYID), + .name = "RTL8211F-VD Gigabit Ethernet", + .probe = rtl821x_probe, + .config_init = &rtl8211f_config_init, + .read_status = rtlgen_read_status, + .config_intr = &rtl8211f_config_intr, + .handle_interrupt = rtl8211f_handle_interrupt, + .suspend = genphy_suspend, + .resume = rtl821x_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + .name = "Generic FE-GE Realtek PHY", + .match_phy_device = rtlgen_match_phy_device, + .read_status = rtlgen_read_status, + .suspend = genphy_suspend, + .resume = rtlgen_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + .read_mmd = rtlgen_read_mmd, + .write_mmd = rtlgen_write_mmd, + }, { + .name = "RTL8226 2.5Gbps PHY", + .match_phy_device = rtl8226_match_phy_device, + .get_features = rtl822x_get_features, + .config_aneg = rtl822x_config_aneg, + .read_status = rtl822x_read_status, + .suspend = genphy_suspend, + .resume = rtlgen_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + .read_mmd = rtl822x_read_mmd, + .write_mmd = rtl822x_write_mmd, + }, { + PHY_ID_MATCH_EXACT(0x001cc840), + .name = "RTL8226B_RTL8221B 2.5Gbps PHY", + .get_features = rtl822x_get_features, + .config_aneg = rtl822x_config_aneg, + .read_status = rtl822x_read_status, + .suspend = genphy_suspend, + .resume = rtlgen_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + .read_mmd = rtl822x_read_mmd, + .write_mmd = rtl822x_write_mmd, + }, { + PHY_ID_MATCH_EXACT(0x001cc838), + .name = "RTL8226-CG 2.5Gbps PHY", + .get_features = rtl822x_get_features, + .config_aneg = rtl822x_config_aneg, + .read_status = rtl822x_read_status, + .suspend = genphy_suspend, + .resume = rtlgen_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc848), + .name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY", + .get_features = rtl822x_get_features, + .config_aneg = rtl822x_config_aneg, + .read_status = rtl822x_read_status, + .suspend = genphy_suspend, + .resume = rtlgen_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc849), + .name = "RTL8221B-VB-CG 2.5Gbps PHY", + .get_features = rtl822x_get_features, + .config_aneg = rtl822x_config_aneg, + .read_status = rtl822x_read_status, + .suspend = genphy_suspend, + .resume = rtlgen_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc84a), + .name = "RTL8221B-VM-CG 2.5Gbps PHY", + .get_features = rtl822x_get_features, + .config_aneg = rtl822x_config_aneg, + .read_status = rtl822x_read_status, + .suspend = genphy_suspend, + .resume = rtlgen_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc961), + .name = "RTL8366RB Gigabit Ethernet", + .config_init = &rtl8366rb_config_init, + /* These interrupts are handled by the irq controller + * embedded inside the RTL8366RB, they get unmasked when the + * irq is requested and ACKed by reading the status register, + * which is done by the irqchip code. + */ + .config_intr = genphy_no_config_intr, + .handle_interrupt = genphy_handle_interrupt_no_ack, + .suspend = genphy_suspend, + .resume = genphy_resume, + }, { + PHY_ID_MATCH_EXACT(0x001ccb00), + .name = "RTL9000AA_RTL9000AN Ethernet", + .features = PHY_BASIC_T1_FEATURES, + .config_init = rtl9000a_config_init, + .config_aneg = rtl9000a_config_aneg, + .read_status = rtl9000a_read_status, + .config_intr = rtl9000a_config_intr, + .handle_interrupt = rtl9000a_handle_interrupt, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + }, { + PHY_ID_MATCH_EXACT(0x001cc942), + .name = "RTL8365MB-VC Gigabit Ethernet", + /* Interrupt handling analogous to RTL8366RB */ + .config_intr = genphy_no_config_intr, + .handle_interrupt = genphy_handle_interrupt_no_ack, + .suspend = genphy_suspend, + .resume = genphy_resume, + }, +}; + +module_phy_driver(realtek_drvs); + +static const struct mdio_device_id __maybe_unused realtek_tbl[] = { + { PHY_ID_MATCH_VENDOR(0x001cc800) }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, realtek_tbl); |