1 files changed, 433 insertions, 0 deletions
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
new file mode 100644
index 000000000..ea86c7035
--- /dev/null
+++ b/drivers/net/wan/pci200syn.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Goramo PCI200SYN synchronous serial card driver for Linux
+ *
+ * Copyright (C) 2002-2008 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * For information see <https://www.kernel.org/pub/linux/utils/net/hdlc/>
+ *
+ * Sources of information:
+ *    Hitachi HD64572 SCA-II User's Manual
+ *    PLX Technology Inc. PCI9052 Data Book
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/capability.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "hd64572.h"
+
+#undef DEBUG_PKT
+#define DEBUG_RINGS
+
+#define PCI200SYN_PLX_SIZE	0x80	/* PLX control window size (128b) */
+#define PCI200SYN_SCA_SIZE	0x400	/* SCA window size (1Kb) */
+#define MAX_TX_BUFFERS		10
+
+static int pci_clock_freq = 33000000;
+#define CLOCK_BASE pci_clock_freq
+
+/*      PLX PCI9052 local configuration and shared runtime registers.
+ *      This structure can be used to access 9052 registers (memory mapped).
+ */
+typedef struct {
+	u32 loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
+	u32 loc_rom_range;	/* 10h : Local ROM Range */
+	u32 loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
+	u32 loc_rom_base;	/* 24h : Local ROM Base */
+	u32 loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
+	u32 rom_bus_descr;	/* 38h : ROM Bus Descriptor */
+	u32 cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
+	u32 intr_ctrl_stat;	/* 4Ch : Interrupt Control/Status */
+	u32 init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
+} plx9052;
+
+typedef struct port_s {
+	struct napi_struct napi;
+	struct net_device *netdev;
+	struct card_s *card;
+	spinlock_t lock;	/* TX lock */
+	sync_serial_settings settings;
+	int rxpart;		/* partial frame received, next frame invalid*/
+	unsigned short encoding;
+	unsigned short parity;
+	u16 rxin;		/* rx ring buffer 'in' pointer */
+	u16 txin;		/* tx ring buffer 'in' and 'last' pointers */
+	u16 txlast;
+	u8 rxs, txs, tmc;	/* SCA registers */
+	u8 chan;		/* physical port # - 0 or 1 */
+} port_t;
+
+typedef struct card_s {
+	u8 __iomem *rambase;	/* buffer memory base (virtual) */
+	u8 __iomem *scabase;	/* SCA memory base (virtual) */
+	plx9052 __iomem *plxbase;/* PLX registers memory base (virtual) */
+	u16 rx_ring_buffers;	/* number of buffers in a ring */
+	u16 tx_ring_buffers;
+	u16 buff_offset;	/* offset of first buffer of first channel */
+	u8 irq;			/* interrupt request level */
+
+	port_t ports[2];
+} card_t;
+
+#define get_port(card, port)	     (&(card)->ports[port])
+#define sca_flush(card)		     (sca_in(IER0, card))
+
+static inline void new_memcpy_toio(char __iomem *dest, char *src, int length)
+{
+	int len;
+
+	do {
+		len = length > 256 ? 256 : length;
+		memcpy_toio(dest, src, len);
+		dest += len;
+		src += len;
+		length -= len;
+		readb(dest);
+	} while (len);
+}
+
+#undef memcpy_toio
+#define memcpy_toio new_memcpy_toio
+
+#include "hd64572.c"
+
+static void pci200_set_iface(port_t *port)
+{
+	card_t *card = port->card;
+	u16 msci = get_msci(port);
+	u8 rxs = port->rxs & CLK_BRG_MASK;
+	u8 txs = port->txs & CLK_BRG_MASK;
+
+	sca_out(EXS_TES1, (port->chan ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
+		port->card);
+	switch (port->settings.clock_type) {
+	case CLOCK_INT:
+		rxs |= CLK_BRG; /* BRG output */
+		txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
+		break;
+
+	case CLOCK_TXINT:
+		rxs |= CLK_LINE; /* RXC input */
+		txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
+		break;
+
+	case CLOCK_TXFROMRX:
+		rxs |= CLK_LINE; /* RXC input */
+		txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
+		break;
+
+	default:		/* EXTernal clock */
+		rxs |= CLK_LINE; /* RXC input */
+		txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
+		break;
+	}
+
+	port->rxs = rxs;
+	port->txs = txs;
+	sca_out(rxs, msci + RXS, card);
+	sca_out(txs, msci + TXS, card);
+	sca_set_port(port);
+}
+
+static int pci200_open(struct net_device *dev)
+{
+	port_t *port = dev_to_port(dev);
+	int result = hdlc_open(dev);
+
+	if (result)
+		return result;
+
+	sca_open(dev);
+	pci200_set_iface(port);
+	sca_flush(port->card);
+	return 0;
+}
+
+static int pci200_close(struct net_device *dev)
+{
+	sca_close(dev);
+	sca_flush(dev_to_port(dev)->card);
+	hdlc_close(dev);
+	return 0;
+}
+
+static int pci200_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
+				 void __user *data, int cmd)
+{
+#ifdef DEBUG_RINGS
+	if (cmd == SIOCDEVPRIVATE) {
+		sca_dump_rings(dev);
+		return 0;
+	}
+#endif
+	return -EOPNOTSUPP;
+}
+
+static int pci200_ioctl(struct net_device *dev, struct if_settings *ifs)
+{
+	const size_t size = sizeof(sync_serial_settings);
+	sync_serial_settings new_line;
+	sync_serial_settings __user *line = ifs->ifs_ifsu.sync;
+	port_t *port = dev_to_port(dev);
+
+	switch (ifs->type) {
+	case IF_GET_IFACE:
+		ifs->type = IF_IFACE_V35;
+		if (ifs->size < size) {
+			ifs->size = size; /* data size wanted */
+			return -ENOBUFS;
+		}
+		if (copy_to_user(line, &port->settings, size))
+			return -EFAULT;
+		return 0;
+
+	case IF_IFACE_V35:
+	case IF_IFACE_SYNC_SERIAL:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+
+		if (copy_from_user(&new_line, line, size))
+			return -EFAULT;
+
+		if (new_line.clock_type != CLOCK_EXT &&
+		    new_line.clock_type != CLOCK_TXFROMRX &&
+		    new_line.clock_type != CLOCK_INT &&
+		    new_line.clock_type != CLOCK_TXINT)
+			return -EINVAL;	/* No such clock setting */
+
+		if (new_line.loopback != 0 && new_line.loopback != 1)
+			return -EINVAL;
+
+		memcpy(&port->settings, &new_line, size); /* Update settings */
+		pci200_set_iface(port);
+		sca_flush(port->card);
+		return 0;
+
+	default:
+		return hdlc_ioctl(dev, ifs);
+	}
+}
+
+static void pci200_pci_remove_one(struct pci_dev *pdev)
+{
+	int i;
+	card_t *card = pci_get_drvdata(pdev);
+
+	for (i = 0; i < 2; i++)
+		if (card->ports[i].card)
+			unregister_hdlc_device(card->ports[i].netdev);
+
+	if (card->irq)
+		free_irq(card->irq, card);
+
+	if (card->rambase)
+		iounmap(card->rambase);
+	if (card->scabase)
+		iounmap(card->scabase);
+	if (card->plxbase)
+		iounmap(card->plxbase);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	if (card->ports[0].netdev)
+		free_netdev(card->ports[0].netdev);
+	if (card->ports[1].netdev)
+		free_netdev(card->ports[1].netdev);
+	kfree(card);
+}
+
+static const struct net_device_ops pci200_ops = {
+	.ndo_open       = pci200_open,
+	.ndo_stop       = pci200_close,
+	.ndo_start_xmit = hdlc_start_xmit,
+	.ndo_siocwandev = pci200_ioctl,
+	.ndo_siocdevprivate = pci200_siocdevprivate,
+};
+
+static int pci200_pci_init_one(struct pci_dev *pdev,
+			       const struct pci_device_id *ent)
+{
+	card_t *card;
+	u32 __iomem *p;
+	int i;
+	u32 ramsize;
+	u32 ramphys;		/* buffer memory base */
+	u32 scaphys;		/* SCA memory base */
+	u32 plxphys;		/* PLX registers memory base */
+
+	i = pci_enable_device(pdev);
+	if (i)
+		return i;
+
+	i = pci_request_regions(pdev, "PCI200SYN");
+	if (i) {
+		pci_disable_device(pdev);
+		return i;
+	}
+
+	card = kzalloc(sizeof(card_t), GFP_KERNEL);
+	if (!card) {
+		pci_release_regions(pdev);
+		pci_disable_device(pdev);
+		return -ENOBUFS;
+	}
+	pci_set_drvdata(pdev, card);
+	card->ports[0].netdev = alloc_hdlcdev(&card->ports[0]);
+	card->ports[1].netdev = alloc_hdlcdev(&card->ports[1]);
+	if (!card->ports[0].netdev || !card->ports[1].netdev) {
+		pr_err("unable to allocate memory\n");
+		pci200_pci_remove_one(pdev);
+		return -ENOMEM;
+	}
+
+	if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
+	    pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
+	    pci_resource_len(pdev, 3) < 16384) {
+		pr_err("invalid card EEPROM parameters\n");
+		pci200_pci_remove_one(pdev);
+		return -EFAULT;
+	}
+
+	plxphys = pci_resource_start(pdev, 0) & PCI_BASE_ADDRESS_MEM_MASK;
+	card->plxbase = ioremap(plxphys, PCI200SYN_PLX_SIZE);
+
+	scaphys = pci_resource_start(pdev, 2) & PCI_BASE_ADDRESS_MEM_MASK;
+	card->scabase = ioremap(scaphys, PCI200SYN_SCA_SIZE);
+
+	ramphys = pci_resource_start(pdev, 3) & PCI_BASE_ADDRESS_MEM_MASK;
+	card->rambase = pci_ioremap_bar(pdev, 3);
+
+	if (!card->plxbase || !card->scabase || !card->rambase) {
+		pr_err("ioremap() failed\n");
+		pci200_pci_remove_one(pdev);
+		return -EFAULT;
+	}
+
+	/* Reset PLX */
+	p = &card->plxbase->init_ctrl;
+	writel(readl(p) | 0x40000000, p);
+	readl(p);		/* Flush the write - do not use sca_flush */
+	udelay(1);
+
+	writel(readl(p) & ~0x40000000, p);
+	readl(p);		/* Flush the write - do not use sca_flush */
+	udelay(1);
+
+	ramsize = sca_detect_ram(card, card->rambase,
+				 pci_resource_len(pdev, 3));
+
+	/* number of TX + RX buffers for one port - this is dual port card */
+	i = ramsize / (2 * (sizeof(pkt_desc) + HDLC_MAX_MRU));
+	card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
+	card->rx_ring_buffers = i - card->tx_ring_buffers;
+
+	card->buff_offset = 2 * sizeof(pkt_desc) * (card->tx_ring_buffers +
+						    card->rx_ring_buffers);
+
+	pr_info("%u KB RAM at 0x%x, IRQ%u, using %u TX + %u RX packets rings\n",
+		ramsize / 1024, ramphys,
+		pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
+
+	if (card->tx_ring_buffers < 1) {
+		pr_err("RAM test failed\n");
+		pci200_pci_remove_one(pdev);
+		return -EFAULT;
+	}
+
+	/* Enable interrupts on the PCI bridge */
+	p = &card->plxbase->intr_ctrl_stat;
+	writew(readw(p) | 0x0040, p);
+
+	/* Allocate IRQ */
+	if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, "pci200syn", card)) {
+		pr_warn("could not allocate IRQ%d\n", pdev->irq);
+		pci200_pci_remove_one(pdev);
+		return -EBUSY;
+	}
+	card->irq = pdev->irq;
+
+	sca_init(card, 0);
+
+	for (i = 0; i < 2; i++) {
+		port_t *port = &card->ports[i];
+		struct net_device *dev = port->netdev;
+		hdlc_device *hdlc = dev_to_hdlc(dev);
+
+		port->chan = i;
+
+		spin_lock_init(&port->lock);
+		dev->irq = card->irq;
+		dev->mem_start = ramphys;
+		dev->mem_end = ramphys + ramsize - 1;
+		dev->tx_queue_len = 50;
+		dev->netdev_ops = &pci200_ops;
+		hdlc->attach = sca_attach;
+		hdlc->xmit = sca_xmit;
+		port->settings.clock_type = CLOCK_EXT;
+		port->card = card;
+		sca_init_port(port);
+		if (register_hdlc_device(dev)) {
+			pr_err("unable to register hdlc device\n");
+			port->card = NULL;
+			pci200_pci_remove_one(pdev);
+			return -ENOBUFS;
+		}
+
+		netdev_info(dev, "PCI200SYN channel %d\n", port->chan);
+	}
+
+	sca_flush(card);
+	return 0;
+}
+
+static const struct pci_device_id pci200_pci_tbl[] = {
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
+	  PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 },
+	{ 0, }
+};
+
+static struct pci_driver pci200_pci_driver = {
+	.name		= "PCI200SYN",
+	.id_table	= pci200_pci_tbl,
+	.probe		= pci200_pci_init_one,
+	.remove		= pci200_pci_remove_one,
+};
+
+static int __init pci200_init_module(void)
+{
+	if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
+		pr_err("Invalid PCI clock frequency\n");
+		return -EINVAL;
+	}
+	return pci_register_driver(&pci200_pci_driver);
+}
+
+static void __exit pci200_cleanup_module(void)
+{
+	pci_unregister_driver(&pci200_pci_driver);
+}
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("Goramo PCI200SYN serial port driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(pci, pci200_pci_tbl);
+module_param(pci_clock_freq, int, 0444);
+MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
+module_init(pci200_init_module);
+module_exit(pci200_cleanup_module);