diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/core.c')
-rw-r--r-- | drivers/net/wireless/ath/ath10k/core.c | 3704 |
1 files changed, 3704 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c new file mode 100644 index 000000000..6cdb225b7 --- /dev/null +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -0,0 +1,3704 @@ +// SPDX-License-Identifier: ISC +/* + * Copyright (c) 2005-2011 Atheros Communications Inc. + * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. + * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. + */ + +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/of.h> +#include <linux/property.h> +#include <linux/dmi.h> +#include <linux/ctype.h> +#include <linux/pm_qos.h> +#include <linux/nvmem-consumer.h> +#include <asm/byteorder.h> + +#include "core.h" +#include "mac.h" +#include "htc.h" +#include "hif.h" +#include "wmi.h" +#include "bmi.h" +#include "debug.h" +#include "htt.h" +#include "testmode.h" +#include "wmi-ops.h" +#include "coredump.h" + +unsigned int ath10k_debug_mask; +EXPORT_SYMBOL(ath10k_debug_mask); + +static unsigned int ath10k_cryptmode_param; +static bool uart_print; +static bool skip_otp; +static bool fw_diag_log; + +/* frame mode values are mapped as per enum ath10k_hw_txrx_mode */ +unsigned int ath10k_frame_mode = ATH10K_HW_TXRX_NATIVE_WIFI; + +unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) | + BIT(ATH10K_FW_CRASH_DUMP_CE_DATA); + +/* FIXME: most of these should be readonly */ +module_param_named(debug_mask, ath10k_debug_mask, uint, 0644); +module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644); +module_param(uart_print, bool, 0644); +module_param(skip_otp, bool, 0644); +module_param(fw_diag_log, bool, 0644); +module_param_named(frame_mode, ath10k_frame_mode, uint, 0644); +module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444); + +MODULE_PARM_DESC(debug_mask, "Debugging mask"); +MODULE_PARM_DESC(uart_print, "Uart target debugging"); +MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode"); +MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software"); +MODULE_PARM_DESC(frame_mode, + "Datapath frame mode (0: raw, 1: native wifi (default), 2: ethernet)"); +MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file"); +MODULE_PARM_DESC(fw_diag_log, "Diag based fw log debugging"); + +static const struct ath10k_hw_params ath10k_hw_params_list[] = { + { + .id = QCA988X_HW_2_0_VERSION, + .dev_id = QCA988X_2_0_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca988x hw2.0", + .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 2116, + .fw = { + .dir = QCA988X_HW_2_0_FW_DIR, + .board = QCA988X_HW_2_0_BOARD_DATA_FILE, + .board_size = QCA988X_BOARD_DATA_SZ, + .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, + .decap_align_bytes = 4, + .spectral_bin_discard = 0, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 8, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = true, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA988X_HW_2_0_VERSION, + .dev_id = QCA988X_2_0_DEVICE_ID_UBNT, + .name = "qca988x hw2.0 ubiquiti", + .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 2116, + .fw = { + .dir = QCA988X_HW_2_0_FW_DIR, + .board = QCA988X_HW_2_0_BOARD_DATA_FILE, + .board_size = QCA988X_BOARD_DATA_SZ, + .board_ext_size = QCA988X_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, + .decap_align_bytes = 4, + .spectral_bin_discard = 0, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 8, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = true, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA9887_HW_1_0_VERSION, + .dev_id = QCA9887_1_0_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca9887 hw1.0", + .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 2116, + .fw = { + .dir = QCA9887_HW_1_0_FW_DIR, + .board = QCA9887_HW_1_0_BOARD_DATA_FILE, + .board_size = QCA9887_BOARD_DATA_SZ, + .board_ext_size = QCA9887_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, + .decap_align_bytes = 4, + .spectral_bin_discard = 0, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 8, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA6174_HW_3_2_VERSION, + .dev_id = QCA6174_3_2_DEVICE_ID, + .bus = ATH10K_BUS_SDIO, + .name = "qca6174 hw3.2 sdio", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 19, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 0, + .fw = { + .dir = QCA6174_HW_3_0_FW_DIR, + .board = QCA6174_HW_3_0_BOARD_DATA_FILE, + .board_size = QCA6174_BOARD_DATA_SZ, + .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca6174_sdio_ops, + .hw_clk = qca6174_clk, + .target_cpu_freq = 176000000, + .decap_align_bytes = 4, + .n_cipher_suites = 8, + .num_peers = 10, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .uart_pin_workaround = true, + .tx_stats_over_pktlog = false, + .credit_size_workaround = false, + .bmi_large_size_download = true, + .supports_peer_stats_info = true, + .dynamic_sar_support = true, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA6174_HW_2_1_VERSION, + .dev_id = QCA6164_2_1_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca6164 hw2.1", + .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, + .uart_pin = 6, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 8124, + .fw = { + .dir = QCA6174_HW_2_1_FW_DIR, + .board = QCA6174_HW_2_1_BOARD_DATA_FILE, + .board_size = QCA6174_BOARD_DATA_SZ, + .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, + .decap_align_bytes = 4, + .spectral_bin_discard = 0, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 8, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA6174_HW_2_1_VERSION, + .dev_id = QCA6174_2_1_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca6174 hw2.1", + .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR, + .uart_pin = 6, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 8124, + .fw = { + .dir = QCA6174_HW_2_1_FW_DIR, + .board = QCA6174_HW_2_1_BOARD_DATA_FILE, + .board_size = QCA6174_BOARD_DATA_SZ, + .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, + .decap_align_bytes = 4, + .spectral_bin_discard = 0, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 8, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA6174_HW_3_0_VERSION, + .dev_id = QCA6174_2_1_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca6174 hw3.0", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 6, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 8124, + .fw = { + .dir = QCA6174_HW_3_0_FW_DIR, + .board = QCA6174_HW_3_0_BOARD_DATA_FILE, + .board_size = QCA6174_BOARD_DATA_SZ, + .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, + .decap_align_bytes = 4, + .spectral_bin_discard = 0, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 8, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA6174_HW_3_2_VERSION, + .dev_id = QCA6174_2_1_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca6174 hw3.2", + .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR, + .uart_pin = 6, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 8124, + .fw = { + /* uses same binaries as hw3.0 */ + .dir = QCA6174_HW_3_0_FW_DIR, + .board = QCA6174_HW_3_0_BOARD_DATA_FILE, + .board_size = QCA6174_BOARD_DATA_SZ, + .board_ext_size = QCA6174_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca6174_ops, + .hw_clk = qca6174_clk, + .target_cpu_freq = 176000000, + .decap_align_bytes = 4, + .spectral_bin_discard = 0, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 8, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = true, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .supports_peer_stats_info = true, + .dynamic_sar_support = true, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA99X0_HW_2_0_DEV_VERSION, + .dev_id = QCA99X0_2_0_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca99x0 hw2.0", + .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .otp_exe_param = 0x00000700, + .continuous_frag_desc = true, + .cck_rate_map_rev2 = true, + .channel_counters_freq_hz = 150000, + .max_probe_resp_desc_thres = 24, + .tx_chain_mask = 0xf, + .rx_chain_mask = 0xf, + .max_spatial_stream = 4, + .cal_data_len = 12064, + .fw = { + .dir = QCA99X0_HW_2_0_FW_DIR, + .board = QCA99X0_HW_2_0_BOARD_DATA_FILE, + .board_size = QCA99X0_BOARD_DATA_SZ, + .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, + }, + .sw_decrypt_mcast_mgmt = true, + .rx_desc_ops = &qca99x0_rx_desc_ops, + .hw_ops = &qca99x0_ops, + .decap_align_bytes = 1, + .spectral_bin_discard = 4, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 11, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA9984_HW_1_0_DEV_VERSION, + .dev_id = QCA9984_1_0_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca9984/qca9994 hw1.0", + .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, + .otp_exe_param = 0x00000700, + .continuous_frag_desc = true, + .cck_rate_map_rev2 = true, + .channel_counters_freq_hz = 150000, + .max_probe_resp_desc_thres = 24, + .tx_chain_mask = 0xf, + .rx_chain_mask = 0xf, + .max_spatial_stream = 4, + .cal_data_len = 12064, + .fw = { + .dir = QCA9984_HW_1_0_FW_DIR, + .board = QCA9984_HW_1_0_BOARD_DATA_FILE, + .eboard = QCA9984_HW_1_0_EBOARD_DATA_FILE, + .board_size = QCA99X0_BOARD_DATA_SZ, + .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, + .ext_board_size = QCA99X0_EXT_BOARD_DATA_SZ, + }, + .sw_decrypt_mcast_mgmt = true, + .rx_desc_ops = &qca99x0_rx_desc_ops, + .hw_ops = &qca99x0_ops, + .decap_align_bytes = 1, + .spectral_bin_discard = 12, + .spectral_bin_offset = 8, + + /* Can do only 2x2 VHT160 or 80+80. 1560Mbps is 4x4 80Mhz + * or 2x2 160Mhz, long-guard-interval. + */ + .vht160_mcs_rx_highest = 1560, + .vht160_mcs_tx_highest = 1560, + .n_cipher_suites = 11, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA9888_HW_2_0_DEV_VERSION, + .dev_id = QCA9888_2_0_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca9888 hw2.0", + .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, + .otp_exe_param = 0x00000700, + .continuous_frag_desc = true, + .channel_counters_freq_hz = 150000, + .max_probe_resp_desc_thres = 24, + .tx_chain_mask = 3, + .rx_chain_mask = 3, + .max_spatial_stream = 2, + .cal_data_len = 12064, + .fw = { + .dir = QCA9888_HW_2_0_FW_DIR, + .board = QCA9888_HW_2_0_BOARD_DATA_FILE, + .board_size = QCA99X0_BOARD_DATA_SZ, + .board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ, + }, + .sw_decrypt_mcast_mgmt = true, + .rx_desc_ops = &qca99x0_rx_desc_ops, + .hw_ops = &qca99x0_ops, + .decap_align_bytes = 1, + .spectral_bin_discard = 12, + .spectral_bin_offset = 8, + + /* Can do only 1x1 VHT160 or 80+80. 780Mbps is 2x2 80Mhz or + * 1x1 160Mhz, long-guard-interval. + */ + .vht160_mcs_rx_highest = 780, + .vht160_mcs_tx_highest = 780, + .n_cipher_suites = 11, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA9377_HW_1_0_DEV_VERSION, + .dev_id = QCA9377_1_0_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca9377 hw1.0", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 6, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 8124, + .fw = { + .dir = QCA9377_HW_1_0_FW_DIR, + .board = QCA9377_HW_1_0_BOARD_DATA_FILE, + .board_size = QCA9377_BOARD_DATA_SZ, + .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca988x_ops, + .decap_align_bytes = 4, + .spectral_bin_discard = 0, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 8, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA9377_HW_1_1_DEV_VERSION, + .dev_id = QCA9377_1_0_DEVICE_ID, + .bus = ATH10K_BUS_PCI, + .name = "qca9377 hw1.1", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 6, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 8124, + .fw = { + .dir = QCA9377_HW_1_0_FW_DIR, + .board = QCA9377_HW_1_0_BOARD_DATA_FILE, + .board_size = QCA9377_BOARD_DATA_SZ, + .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca6174_ops, + .hw_clk = qca6174_clk, + .target_cpu_freq = 176000000, + .decap_align_bytes = 4, + .spectral_bin_discard = 0, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 8, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = true, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA9377_HW_1_1_DEV_VERSION, + .dev_id = QCA9377_1_0_DEVICE_ID, + .bus = ATH10K_BUS_SDIO, + .name = "qca9377 hw1.1 sdio", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 19, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 8124, + .fw = { + .dir = QCA9377_HW_1_0_FW_DIR, + .board = QCA9377_HW_1_0_BOARD_DATA_FILE, + .board_size = QCA9377_BOARD_DATA_SZ, + .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, + }, + .rx_desc_ops = &qca988x_rx_desc_ops, + .hw_ops = &qca6174_ops, + .hw_clk = qca6174_clk, + .target_cpu_freq = 176000000, + .decap_align_bytes = 4, + .n_cipher_suites = 8, + .num_peers = TARGET_QCA9377_HL_NUM_PEERS, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .uart_pin_workaround = true, + .credit_size_workaround = true, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = QCA4019_HW_1_0_DEV_VERSION, + .dev_id = 0, + .bus = ATH10K_BUS_AHB, + .name = "qca4019 hw1.0", + .patch_load_addr = QCA4019_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 7, + .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH, + .otp_exe_param = 0x0010000, + .continuous_frag_desc = true, + .cck_rate_map_rev2 = true, + .channel_counters_freq_hz = 125000, + .max_probe_resp_desc_thres = 24, + .tx_chain_mask = 0x3, + .rx_chain_mask = 0x3, + .max_spatial_stream = 2, + .cal_data_len = 12064, + .fw = { + .dir = QCA4019_HW_1_0_FW_DIR, + .board = QCA4019_HW_1_0_BOARD_DATA_FILE, + .board_size = QCA4019_BOARD_DATA_SZ, + .board_ext_size = QCA4019_BOARD_EXT_DATA_SZ, + }, + .sw_decrypt_mcast_mgmt = true, + .rx_desc_ops = &qca99x0_rx_desc_ops, + .hw_ops = &qca99x0_ops, + .decap_align_bytes = 1, + .spectral_bin_discard = 4, + .spectral_bin_offset = 0, + .vht160_mcs_rx_highest = 0, + .vht160_mcs_tx_highest = 0, + .n_cipher_suites = 11, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .target_64bit = false, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL, + .shadow_reg_support = false, + .rri_on_ddr = false, + .hw_filter_reset_required = true, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = false, + .hw_restart_disconnect = false, + .use_fw_tx_credits = true, + .delay_unmap_buffer = false, + }, + { + .id = WCN3990_HW_1_0_DEV_VERSION, + .dev_id = 0, + .bus = ATH10K_BUS_SNOC, + .name = "wcn3990 hw1.0", + .continuous_frag_desc = true, + .tx_chain_mask = 0x7, + .rx_chain_mask = 0x7, + .max_spatial_stream = 4, + .fw = { + .dir = WCN3990_HW_1_0_FW_DIR, + }, + .sw_decrypt_mcast_mgmt = true, + .rx_desc_ops = &wcn3990_rx_desc_ops, + .hw_ops = &wcn3990_ops, + .decap_align_bytes = 1, + .num_peers = TARGET_HL_TLV_NUM_PEERS, + .n_cipher_suites = 11, + .ast_skid_limit = TARGET_HL_TLV_AST_SKID_LIMIT, + .num_wds_entries = TARGET_HL_TLV_NUM_WDS_ENTRIES, + .target_64bit = true, + .rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL_DUAL_MAC, + .shadow_reg_support = true, + .rri_on_ddr = true, + .hw_filter_reset_required = false, + .fw_diag_ce_download = false, + .credit_size_workaround = false, + .tx_stats_over_pktlog = false, + .dynamic_sar_support = true, + .hw_restart_disconnect = true, + .use_fw_tx_credits = false, + .delay_unmap_buffer = true, + }, +}; + +static const char *const ath10k_core_fw_feature_str[] = { + [ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX] = "wmi-mgmt-rx", + [ATH10K_FW_FEATURE_WMI_10X] = "wmi-10.x", + [ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX] = "has-wmi-mgmt-tx", + [ATH10K_FW_FEATURE_NO_P2P] = "no-p2p", + [ATH10K_FW_FEATURE_WMI_10_2] = "wmi-10.2", + [ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT] = "multi-vif-ps", + [ATH10K_FW_FEATURE_WOWLAN_SUPPORT] = "wowlan", + [ATH10K_FW_FEATURE_IGNORE_OTP_RESULT] = "ignore-otp", + [ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING] = "no-4addr-pad", + [ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT] = "skip-clock-init", + [ATH10K_FW_FEATURE_RAW_MODE_SUPPORT] = "raw-mode", + [ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA] = "adaptive-cca", + [ATH10K_FW_FEATURE_MFP_SUPPORT] = "mfp", + [ATH10K_FW_FEATURE_PEER_FLOW_CONTROL] = "peer-flow-ctrl", + [ATH10K_FW_FEATURE_BTCOEX_PARAM] = "btcoex-param", + [ATH10K_FW_FEATURE_SKIP_NULL_FUNC_WAR] = "skip-null-func-war", + [ATH10K_FW_FEATURE_ALLOWS_MESH_BCAST] = "allows-mesh-bcast", + [ATH10K_FW_FEATURE_NO_PS] = "no-ps", + [ATH10K_FW_FEATURE_MGMT_TX_BY_REF] = "mgmt-tx-by-reference", + [ATH10K_FW_FEATURE_NON_BMI] = "non-bmi", + [ATH10K_FW_FEATURE_SINGLE_CHAN_INFO_PER_CHANNEL] = "single-chan-info-per-channel", + [ATH10K_FW_FEATURE_PEER_FIXED_RATE] = "peer-fixed-rate", + [ATH10K_FW_FEATURE_IRAM_RECOVERY] = "iram-recovery", +}; + +static unsigned int ath10k_core_get_fw_feature_str(char *buf, + size_t buf_len, + enum ath10k_fw_features feat) +{ + /* make sure that ath10k_core_fw_feature_str[] gets updated */ + BUILD_BUG_ON(ARRAY_SIZE(ath10k_core_fw_feature_str) != + ATH10K_FW_FEATURE_COUNT); + + if (feat >= ARRAY_SIZE(ath10k_core_fw_feature_str) || + WARN_ON(!ath10k_core_fw_feature_str[feat])) { + return scnprintf(buf, buf_len, "bit%d", feat); + } + + return scnprintf(buf, buf_len, "%s", ath10k_core_fw_feature_str[feat]); +} + +void ath10k_core_get_fw_features_str(struct ath10k *ar, + char *buf, + size_t buf_len) +{ + size_t len = 0; + int i; + + for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) { + if (test_bit(i, ar->normal_mode_fw.fw_file.fw_features)) { + if (len > 0) + len += scnprintf(buf + len, buf_len - len, ","); + + len += ath10k_core_get_fw_feature_str(buf + len, + buf_len - len, + i); + } + } +} + +static void ath10k_send_suspend_complete(struct ath10k *ar) +{ + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot suspend complete\n"); + + complete(&ar->target_suspend); +} + +static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode) +{ + bool mtu_workaround = ar->hw_params.credit_size_workaround; + int ret; + u32 param = 0; + + ret = ath10k_bmi_write32(ar, hi_mbox_io_block_sz, 256); + if (ret) + return ret; + + ret = ath10k_bmi_write32(ar, hi_mbox_isr_yield_limit, 99); + if (ret) + return ret; + + ret = ath10k_bmi_read32(ar, hi_acs_flags, ¶m); + if (ret) + return ret; + + param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET; + + if (mode == ATH10K_FIRMWARE_MODE_NORMAL && !mtu_workaround) + param |= HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE; + else + param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE; + + if (mode == ATH10K_FIRMWARE_MODE_UTF) + param &= ~HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET; + else + param |= HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET; + + ret = ath10k_bmi_write32(ar, hi_acs_flags, param); + if (ret) + return ret; + + ret = ath10k_bmi_read32(ar, hi_option_flag2, ¶m); + if (ret) + return ret; + + param |= HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_HOST; + + ret = ath10k_bmi_write32(ar, hi_option_flag2, param); + if (ret) + return ret; + + return 0; +} + +static int ath10k_init_configure_target(struct ath10k *ar) +{ + u32 param_host; + int ret; + + /* tell target which HTC version it is used*/ + ret = ath10k_bmi_write32(ar, hi_app_host_interest, + HTC_PROTOCOL_VERSION); + if (ret) { + ath10k_err(ar, "settings HTC version failed\n"); + return ret; + } + + /* set the firmware mode to STA/IBSS/AP */ + ret = ath10k_bmi_read32(ar, hi_option_flag, ¶m_host); + if (ret) { + ath10k_err(ar, "setting firmware mode (1/2) failed\n"); + return ret; + } + + /* TODO following parameters need to be re-visited. */ + /* num_device */ + param_host |= (1 << HI_OPTION_NUM_DEV_SHIFT); + /* Firmware mode */ + /* FIXME: Why FW_MODE_AP ??.*/ + param_host |= (HI_OPTION_FW_MODE_AP << HI_OPTION_FW_MODE_SHIFT); + /* mac_addr_method */ + param_host |= (1 << HI_OPTION_MAC_ADDR_METHOD_SHIFT); + /* firmware_bridge */ + param_host |= (0 << HI_OPTION_FW_BRIDGE_SHIFT); + /* fwsubmode */ + param_host |= (0 << HI_OPTION_FW_SUBMODE_SHIFT); + + ret = ath10k_bmi_write32(ar, hi_option_flag, param_host); + if (ret) { + ath10k_err(ar, "setting firmware mode (2/2) failed\n"); + return ret; + } + + /* We do all byte-swapping on the host */ + ret = ath10k_bmi_write32(ar, hi_be, 0); + if (ret) { + ath10k_err(ar, "setting host CPU BE mode failed\n"); + return ret; + } + + /* FW descriptor/Data swap flags */ + ret = ath10k_bmi_write32(ar, hi_fw_swap, 0); + + if (ret) { + ath10k_err(ar, "setting FW data/desc swap flags failed\n"); + return ret; + } + + /* Some devices have a special sanity check that verifies the PCI + * Device ID is written to this host interest var. It is known to be + * required to boot QCA6164. + */ + ret = ath10k_bmi_write32(ar, hi_hci_uart_pwr_mgmt_params_ext, + ar->dev_id); + if (ret) { + ath10k_err(ar, "failed to set pwr_mgmt_params: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar, + const char *dir, + const char *file) +{ + char filename[100]; + const struct firmware *fw; + int ret; + + if (file == NULL) + return ERR_PTR(-ENOENT); + + if (dir == NULL) + dir = "."; + + snprintf(filename, sizeof(filename), "%s/%s", dir, file); + ret = firmware_request_nowarn(&fw, filename, ar->dev); + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot fw request '%s': %d\n", + filename, ret); + + if (ret) + return ERR_PTR(ret); + + return fw; +} + +static int ath10k_push_board_ext_data(struct ath10k *ar, const void *data, + size_t data_len) +{ + u32 board_data_size = ar->hw_params.fw.board_size; + u32 board_ext_data_size = ar->hw_params.fw.board_ext_size; + u32 board_ext_data_addr; + int ret; + + ret = ath10k_bmi_read32(ar, hi_board_ext_data, &board_ext_data_addr); + if (ret) { + ath10k_err(ar, "could not read board ext data addr (%d)\n", + ret); + return ret; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot push board extended data addr 0x%x\n", + board_ext_data_addr); + + if (board_ext_data_addr == 0) + return 0; + + if (data_len != (board_data_size + board_ext_data_size)) { + ath10k_err(ar, "invalid board (ext) data sizes %zu != %d+%d\n", + data_len, board_data_size, board_ext_data_size); + return -EINVAL; + } + + ret = ath10k_bmi_write_memory(ar, board_ext_data_addr, + data + board_data_size, + board_ext_data_size); + if (ret) { + ath10k_err(ar, "could not write board ext data (%d)\n", ret); + return ret; + } + + ret = ath10k_bmi_write32(ar, hi_board_ext_data_config, + (board_ext_data_size << 16) | 1); + if (ret) { + ath10k_err(ar, "could not write board ext data bit (%d)\n", + ret); + return ret; + } + + return 0; +} + +static int ath10k_core_get_board_id_from_otp(struct ath10k *ar) +{ + u32 result, address; + u8 board_id, chip_id; + bool ext_bid_support; + int ret, bmi_board_id_param; + + address = ar->hw_params.patch_load_addr; + + if (!ar->normal_mode_fw.fw_file.otp_data || + !ar->normal_mode_fw.fw_file.otp_len) { + ath10k_warn(ar, + "failed to retrieve board id because of invalid otp\n"); + return -ENODATA; + } + + if (ar->id.bmi_ids_valid) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot already acquired valid otp board id,skip download, board_id %d chip_id %d\n", + ar->id.bmi_board_id, ar->id.bmi_chip_id); + goto skip_otp_download; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot upload otp to 0x%x len %zd for board id\n", + address, ar->normal_mode_fw.fw_file.otp_len); + + ret = ath10k_bmi_fast_download(ar, address, + ar->normal_mode_fw.fw_file.otp_data, + ar->normal_mode_fw.fw_file.otp_len); + if (ret) { + ath10k_err(ar, "could not write otp for board id check: %d\n", + ret); + return ret; + } + + if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || + ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE || + ar->cal_mode == ATH10K_PRE_CAL_MODE_NVMEM) + bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID; + else + bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID; + + ret = ath10k_bmi_execute(ar, address, bmi_board_id_param, &result); + if (ret) { + ath10k_err(ar, "could not execute otp for board id check: %d\n", + ret); + return ret; + } + + board_id = MS(result, ATH10K_BMI_BOARD_ID_FROM_OTP); + chip_id = MS(result, ATH10K_BMI_CHIP_ID_FROM_OTP); + ext_bid_support = (result & ATH10K_BMI_EXT_BOARD_ID_SUPPORT); + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot get otp board id result 0x%08x board_id %d chip_id %d ext_bid_support %d\n", + result, board_id, chip_id, ext_bid_support); + + ar->id.ext_bid_supported = ext_bid_support; + + if ((result & ATH10K_BMI_BOARD_ID_STATUS_MASK) != 0 || + (board_id == 0)) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "board id does not exist in otp, ignore it\n"); + return -EOPNOTSUPP; + } + + ar->id.bmi_ids_valid = true; + ar->id.bmi_board_id = board_id; + ar->id.bmi_chip_id = chip_id; + +skip_otp_download: + + return 0; +} + +static void ath10k_core_check_bdfext(const struct dmi_header *hdr, void *data) +{ + struct ath10k *ar = data; + const char *bdf_ext; + const char *magic = ATH10K_SMBIOS_BDF_EXT_MAGIC; + u8 bdf_enabled; + int i; + + if (hdr->type != ATH10K_SMBIOS_BDF_EXT_TYPE) + return; + + if (hdr->length != ATH10K_SMBIOS_BDF_EXT_LENGTH) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "wrong smbios bdf ext type length (%d).\n", + hdr->length); + return; + } + + bdf_enabled = *((u8 *)hdr + ATH10K_SMBIOS_BDF_EXT_OFFSET); + if (!bdf_enabled) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, "bdf variant name not found.\n"); + return; + } + + /* Only one string exists (per spec) */ + bdf_ext = (char *)hdr + hdr->length; + + if (memcmp(bdf_ext, magic, strlen(magic)) != 0) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "bdf variant magic does not match.\n"); + return; + } + + for (i = 0; i < strlen(bdf_ext); i++) { + if (!isascii(bdf_ext[i]) || !isprint(bdf_ext[i])) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "bdf variant name contains non ascii chars.\n"); + return; + } + } + + /* Copy extension name without magic suffix */ + if (strscpy(ar->id.bdf_ext, bdf_ext + strlen(magic), + sizeof(ar->id.bdf_ext)) < 0) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "bdf variant string is longer than the buffer can accommodate (variant: %s)\n", + bdf_ext); + return; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "found and validated bdf variant smbios_type 0x%x bdf %s\n", + ATH10K_SMBIOS_BDF_EXT_TYPE, bdf_ext); +} + +static int ath10k_core_check_smbios(struct ath10k *ar) +{ + ar->id.bdf_ext[0] = '\0'; + dmi_walk(ath10k_core_check_bdfext, ar); + + if (ar->id.bdf_ext[0] == '\0') + return -ENODATA; + + return 0; +} + +int ath10k_core_check_dt(struct ath10k *ar) +{ + struct device_node *node; + const char *variant = NULL; + + node = ar->dev->of_node; + if (!node) + return -ENOENT; + + of_property_read_string(node, "qcom,ath10k-calibration-variant", + &variant); + if (!variant) + return -ENODATA; + + if (strscpy(ar->id.bdf_ext, variant, sizeof(ar->id.bdf_ext)) < 0) + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "bdf variant string is longer than the buffer can accommodate (variant: %s)\n", + variant); + + return 0; +} +EXPORT_SYMBOL(ath10k_core_check_dt); + +static int ath10k_download_fw(struct ath10k *ar) +{ + u32 address, data_len; + const void *data; + int ret; + struct pm_qos_request latency_qos; + + address = ar->hw_params.patch_load_addr; + + data = ar->running_fw->fw_file.firmware_data; + data_len = ar->running_fw->fw_file.firmware_len; + + ret = ath10k_swap_code_seg_configure(ar, &ar->running_fw->fw_file); + if (ret) { + ath10k_err(ar, "failed to configure fw code swap: %d\n", + ret); + return ret; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot uploading firmware image %pK len %d\n", + data, data_len); + + /* Check if device supports to download firmware via + * diag copy engine. Downloading firmware via diag CE + * greatly reduces the time to download firmware. + */ + if (ar->hw_params.fw_diag_ce_download) { + ret = ath10k_hw_diag_fast_download(ar, address, + data, data_len); + if (ret == 0) + /* firmware upload via diag ce was successful */ + return 0; + + ath10k_warn(ar, + "failed to upload firmware via diag ce, trying BMI: %d", + ret); + } + + memset(&latency_qos, 0, sizeof(latency_qos)); + cpu_latency_qos_add_request(&latency_qos, 0); + + ret = ath10k_bmi_fast_download(ar, address, data, data_len); + + cpu_latency_qos_remove_request(&latency_qos); + + return ret; +} + +void ath10k_core_free_board_files(struct ath10k *ar) +{ + if (!IS_ERR(ar->normal_mode_fw.board)) + release_firmware(ar->normal_mode_fw.board); + + if (!IS_ERR(ar->normal_mode_fw.ext_board)) + release_firmware(ar->normal_mode_fw.ext_board); + + ar->normal_mode_fw.board = NULL; + ar->normal_mode_fw.board_data = NULL; + ar->normal_mode_fw.board_len = 0; + ar->normal_mode_fw.ext_board = NULL; + ar->normal_mode_fw.ext_board_data = NULL; + ar->normal_mode_fw.ext_board_len = 0; +} +EXPORT_SYMBOL(ath10k_core_free_board_files); + +static void ath10k_core_free_firmware_files(struct ath10k *ar) +{ + if (!IS_ERR(ar->normal_mode_fw.fw_file.firmware)) + release_firmware(ar->normal_mode_fw.fw_file.firmware); + + if (!IS_ERR(ar->cal_file)) + release_firmware(ar->cal_file); + + if (!IS_ERR(ar->pre_cal_file)) + release_firmware(ar->pre_cal_file); + + ath10k_swap_code_seg_release(ar, &ar->normal_mode_fw.fw_file); + + ar->normal_mode_fw.fw_file.otp_data = NULL; + ar->normal_mode_fw.fw_file.otp_len = 0; + + ar->normal_mode_fw.fw_file.firmware = NULL; + ar->normal_mode_fw.fw_file.firmware_data = NULL; + ar->normal_mode_fw.fw_file.firmware_len = 0; + + ar->cal_file = NULL; + ar->pre_cal_file = NULL; +} + +static int ath10k_fetch_cal_file(struct ath10k *ar) +{ + char filename[100]; + + /* pre-cal-<bus>-<id>.bin */ + scnprintf(filename, sizeof(filename), "pre-cal-%s-%s.bin", + ath10k_bus_str(ar->hif.bus), dev_name(ar->dev)); + + ar->pre_cal_file = ath10k_fetch_fw_file(ar, ATH10K_FW_DIR, filename); + if (!IS_ERR(ar->pre_cal_file)) + goto success; + + /* cal-<bus>-<id>.bin */ + scnprintf(filename, sizeof(filename), "cal-%s-%s.bin", + ath10k_bus_str(ar->hif.bus), dev_name(ar->dev)); + + ar->cal_file = ath10k_fetch_fw_file(ar, ATH10K_FW_DIR, filename); + if (IS_ERR(ar->cal_file)) + /* calibration file is optional, don't print any warnings */ + return PTR_ERR(ar->cal_file); +success: + ath10k_dbg(ar, ATH10K_DBG_BOOT, "found calibration file %s/%s\n", + ATH10K_FW_DIR, filename); + + return 0; +} + +static int ath10k_core_fetch_board_data_api_1(struct ath10k *ar, int bd_ie_type) +{ + const struct firmware *fw; + char boardname[100]; + + if (bd_ie_type == ATH10K_BD_IE_BOARD) { + if (!ar->hw_params.fw.board) { + ath10k_err(ar, "failed to find board file fw entry\n"); + return -EINVAL; + } + + scnprintf(boardname, sizeof(boardname), "board-%s-%s.bin", + ath10k_bus_str(ar->hif.bus), dev_name(ar->dev)); + + ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar, + ar->hw_params.fw.dir, + boardname); + if (IS_ERR(ar->normal_mode_fw.board)) { + fw = ath10k_fetch_fw_file(ar, + ar->hw_params.fw.dir, + ar->hw_params.fw.board); + ar->normal_mode_fw.board = fw; + } + + if (IS_ERR(ar->normal_mode_fw.board)) + return PTR_ERR(ar->normal_mode_fw.board); + + ar->normal_mode_fw.board_data = ar->normal_mode_fw.board->data; + ar->normal_mode_fw.board_len = ar->normal_mode_fw.board->size; + } else if (bd_ie_type == ATH10K_BD_IE_BOARD_EXT) { + if (!ar->hw_params.fw.eboard) { + ath10k_err(ar, "failed to find eboard file fw entry\n"); + return -EINVAL; + } + + fw = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, + ar->hw_params.fw.eboard); + ar->normal_mode_fw.ext_board = fw; + if (IS_ERR(ar->normal_mode_fw.ext_board)) + return PTR_ERR(ar->normal_mode_fw.ext_board); + + ar->normal_mode_fw.ext_board_data = ar->normal_mode_fw.ext_board->data; + ar->normal_mode_fw.ext_board_len = ar->normal_mode_fw.ext_board->size; + } + + return 0; +} + +static int ath10k_core_parse_bd_ie_board(struct ath10k *ar, + const void *buf, size_t buf_len, + const char *boardname, + int bd_ie_type) +{ + const struct ath10k_fw_ie *hdr; + bool name_match_found; + int ret, board_ie_id; + size_t board_ie_len; + const void *board_ie_data; + + name_match_found = false; + + /* go through ATH10K_BD_IE_BOARD_ elements */ + while (buf_len > sizeof(struct ath10k_fw_ie)) { + hdr = buf; + board_ie_id = le32_to_cpu(hdr->id); + board_ie_len = le32_to_cpu(hdr->len); + board_ie_data = hdr->data; + + buf_len -= sizeof(*hdr); + buf += sizeof(*hdr); + + if (buf_len < ALIGN(board_ie_len, 4)) { + ath10k_err(ar, "invalid ATH10K_BD_IE_BOARD length: %zu < %zu\n", + buf_len, ALIGN(board_ie_len, 4)); + ret = -EINVAL; + goto out; + } + + switch (board_ie_id) { + case ATH10K_BD_IE_BOARD_NAME: + ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "board name", "", + board_ie_data, board_ie_len); + + if (board_ie_len != strlen(boardname)) + break; + + ret = memcmp(board_ie_data, boardname, strlen(boardname)); + if (ret) + break; + + name_match_found = true; + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot found match for name '%s'", + boardname); + break; + case ATH10K_BD_IE_BOARD_DATA: + if (!name_match_found) + /* no match found */ + break; + + if (bd_ie_type == ATH10K_BD_IE_BOARD) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot found board data for '%s'", + boardname); + + ar->normal_mode_fw.board_data = board_ie_data; + ar->normal_mode_fw.board_len = board_ie_len; + } else if (bd_ie_type == ATH10K_BD_IE_BOARD_EXT) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot found eboard data for '%s'", + boardname); + + ar->normal_mode_fw.ext_board_data = board_ie_data; + ar->normal_mode_fw.ext_board_len = board_ie_len; + } + + ret = 0; + goto out; + default: + ath10k_warn(ar, "unknown ATH10K_BD_IE_BOARD found: %d\n", + board_ie_id); + break; + } + + /* jump over the padding */ + board_ie_len = ALIGN(board_ie_len, 4); + + buf_len -= board_ie_len; + buf += board_ie_len; + } + + /* no match found */ + ret = -ENOENT; + +out: + return ret; +} + +static int ath10k_core_search_bd(struct ath10k *ar, + const char *boardname, + const u8 *data, + size_t len) +{ + size_t ie_len; + struct ath10k_fw_ie *hdr; + int ret = -ENOENT, ie_id; + + while (len > sizeof(struct ath10k_fw_ie)) { + hdr = (struct ath10k_fw_ie *)data; + ie_id = le32_to_cpu(hdr->id); + ie_len = le32_to_cpu(hdr->len); + + len -= sizeof(*hdr); + data = hdr->data; + + if (len < ALIGN(ie_len, 4)) { + ath10k_err(ar, "invalid length for board ie_id %d ie_len %zu len %zu\n", + ie_id, ie_len, len); + return -EINVAL; + } + + switch (ie_id) { + case ATH10K_BD_IE_BOARD: + ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len, + boardname, + ATH10K_BD_IE_BOARD); + if (ret == -ENOENT) + /* no match found, continue */ + break; + + /* either found or error, so stop searching */ + goto out; + case ATH10K_BD_IE_BOARD_EXT: + ret = ath10k_core_parse_bd_ie_board(ar, data, ie_len, + boardname, + ATH10K_BD_IE_BOARD_EXT); + if (ret == -ENOENT) + /* no match found, continue */ + break; + + /* either found or error, so stop searching */ + goto out; + } + + /* jump over the padding */ + ie_len = ALIGN(ie_len, 4); + + len -= ie_len; + data += ie_len; + } + +out: + /* return result of parse_bd_ie_board() or -ENOENT */ + return ret; +} + +static int ath10k_core_fetch_board_data_api_n(struct ath10k *ar, + const char *boardname, + const char *fallback_boardname1, + const char *fallback_boardname2, + const char *filename) +{ + size_t len, magic_len; + const u8 *data; + int ret; + + /* Skip if already fetched during board data download */ + if (!ar->normal_mode_fw.board) + ar->normal_mode_fw.board = ath10k_fetch_fw_file(ar, + ar->hw_params.fw.dir, + filename); + if (IS_ERR(ar->normal_mode_fw.board)) + return PTR_ERR(ar->normal_mode_fw.board); + + data = ar->normal_mode_fw.board->data; + len = ar->normal_mode_fw.board->size; + + /* magic has extra null byte padded */ + magic_len = strlen(ATH10K_BOARD_MAGIC) + 1; + if (len < magic_len) { + ath10k_err(ar, "failed to find magic value in %s/%s, file too short: %zu\n", + ar->hw_params.fw.dir, filename, len); + ret = -EINVAL; + goto err; + } + + if (memcmp(data, ATH10K_BOARD_MAGIC, magic_len)) { + ath10k_err(ar, "found invalid board magic\n"); + ret = -EINVAL; + goto err; + } + + /* magic is padded to 4 bytes */ + magic_len = ALIGN(magic_len, 4); + if (len < magic_len) { + ath10k_err(ar, "failed: %s/%s too small to contain board data, len: %zu\n", + ar->hw_params.fw.dir, filename, len); + ret = -EINVAL; + goto err; + } + + data += magic_len; + len -= magic_len; + + /* attempt to find boardname in the IE list */ + ret = ath10k_core_search_bd(ar, boardname, data, len); + + /* if we didn't find it and have a fallback name, try that */ + if (ret == -ENOENT && fallback_boardname1) + ret = ath10k_core_search_bd(ar, fallback_boardname1, data, len); + + if (ret == -ENOENT && fallback_boardname2) + ret = ath10k_core_search_bd(ar, fallback_boardname2, data, len); + + if (ret == -ENOENT) { + ath10k_err(ar, + "failed to fetch board data for %s from %s/%s\n", + boardname, ar->hw_params.fw.dir, filename); + ret = -ENODATA; + } + + if (ret) + goto err; + + return 0; + +err: + ath10k_core_free_board_files(ar); + return ret; +} + +static int ath10k_core_create_board_name(struct ath10k *ar, char *name, + size_t name_len, bool with_variant, + bool with_chip_id) +{ + /* strlen(',variant=') + strlen(ar->id.bdf_ext) */ + char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 }; + + if (with_variant && ar->id.bdf_ext[0] != '\0') + scnprintf(variant, sizeof(variant), ",variant=%s", + ar->id.bdf_ext); + + if (ar->id.bmi_ids_valid) { + scnprintf(name, name_len, + "bus=%s,bmi-chip-id=%d,bmi-board-id=%d%s", + ath10k_bus_str(ar->hif.bus), + ar->id.bmi_chip_id, + ar->id.bmi_board_id, variant); + goto out; + } + + if (ar->id.qmi_ids_valid) { + if (with_chip_id) + scnprintf(name, name_len, + "bus=%s,qmi-board-id=%x,qmi-chip-id=%x%s", + ath10k_bus_str(ar->hif.bus), + ar->id.qmi_board_id, ar->id.qmi_chip_id, + variant); + else + scnprintf(name, name_len, + "bus=%s,qmi-board-id=%x", + ath10k_bus_str(ar->hif.bus), + ar->id.qmi_board_id); + goto out; + } + + scnprintf(name, name_len, + "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x%s", + ath10k_bus_str(ar->hif.bus), + ar->id.vendor, ar->id.device, + ar->id.subsystem_vendor, ar->id.subsystem_device, variant); +out: + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using board name '%s'\n", name); + + return 0; +} + +static int ath10k_core_create_eboard_name(struct ath10k *ar, char *name, + size_t name_len) +{ + if (ar->id.bmi_ids_valid) { + scnprintf(name, name_len, + "bus=%s,bmi-chip-id=%d,bmi-eboard-id=%d", + ath10k_bus_str(ar->hif.bus), + ar->id.bmi_chip_id, + ar->id.bmi_eboard_id); + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using eboard name '%s'\n", name); + return 0; + } + /* Fallback if returned board id is zero */ + return -1; +} + +int ath10k_core_fetch_board_file(struct ath10k *ar, int bd_ie_type) +{ + char boardname[100], fallback_boardname1[100], fallback_boardname2[100]; + int ret; + + if (bd_ie_type == ATH10K_BD_IE_BOARD) { + /* With variant and chip id */ + ret = ath10k_core_create_board_name(ar, boardname, + sizeof(boardname), true, + true); + if (ret) { + ath10k_err(ar, "failed to create board name: %d", ret); + return ret; + } + + /* Without variant and only chip-id */ + ret = ath10k_core_create_board_name(ar, fallback_boardname1, + sizeof(boardname), false, + true); + if (ret) { + ath10k_err(ar, "failed to create 1st fallback board name: %d", + ret); + return ret; + } + + /* Without variant and without chip-id */ + ret = ath10k_core_create_board_name(ar, fallback_boardname2, + sizeof(boardname), false, + false); + if (ret) { + ath10k_err(ar, "failed to create 2nd fallback board name: %d", + ret); + return ret; + } + } else if (bd_ie_type == ATH10K_BD_IE_BOARD_EXT) { + ret = ath10k_core_create_eboard_name(ar, boardname, + sizeof(boardname)); + if (ret) { + ath10k_err(ar, "fallback to eboard.bin since board id 0"); + goto fallback; + } + } + + ar->bd_api = 2; + ret = ath10k_core_fetch_board_data_api_n(ar, boardname, + fallback_boardname1, + fallback_boardname2, + ATH10K_BOARD_API2_FILE); + if (!ret) + goto success; + +fallback: + ar->bd_api = 1; + ret = ath10k_core_fetch_board_data_api_1(ar, bd_ie_type); + if (ret) { + ath10k_err(ar, "failed to fetch board-2.bin or board.bin from %s\n", + ar->hw_params.fw.dir); + return ret; + } + +success: + ath10k_dbg(ar, ATH10K_DBG_BOOT, "using board api %d\n", ar->bd_api); + return 0; +} +EXPORT_SYMBOL(ath10k_core_fetch_board_file); + +static int ath10k_core_get_ext_board_id_from_otp(struct ath10k *ar) +{ + u32 result, address; + u8 ext_board_id; + int ret; + + address = ar->hw_params.patch_load_addr; + + if (!ar->normal_mode_fw.fw_file.otp_data || + !ar->normal_mode_fw.fw_file.otp_len) { + ath10k_warn(ar, + "failed to retrieve extended board id due to otp binary missing\n"); + return -ENODATA; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot upload otp to 0x%x len %zd for ext board id\n", + address, ar->normal_mode_fw.fw_file.otp_len); + + ret = ath10k_bmi_fast_download(ar, address, + ar->normal_mode_fw.fw_file.otp_data, + ar->normal_mode_fw.fw_file.otp_len); + if (ret) { + ath10k_err(ar, "could not write otp for ext board id check: %d\n", + ret); + return ret; + } + + ret = ath10k_bmi_execute(ar, address, BMI_PARAM_GET_EXT_BOARD_ID, &result); + if (ret) { + ath10k_err(ar, "could not execute otp for ext board id check: %d\n", + ret); + return ret; + } + + if (!result) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "ext board id does not exist in otp, ignore it\n"); + return -EOPNOTSUPP; + } + + ext_board_id = result & ATH10K_BMI_EBOARD_ID_STATUS_MASK; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot get otp ext board id result 0x%08x ext_board_id %d\n", + result, ext_board_id); + + ar->id.bmi_eboard_id = ext_board_id; + + return 0; +} + +static int ath10k_download_board_data(struct ath10k *ar, const void *data, + size_t data_len) +{ + u32 board_data_size = ar->hw_params.fw.board_size; + u32 eboard_data_size = ar->hw_params.fw.ext_board_size; + u32 board_address; + u32 ext_board_address; + int ret; + + ret = ath10k_push_board_ext_data(ar, data, data_len); + if (ret) { + ath10k_err(ar, "could not push board ext data (%d)\n", ret); + goto exit; + } + + ret = ath10k_bmi_read32(ar, hi_board_data, &board_address); + if (ret) { + ath10k_err(ar, "could not read board data addr (%d)\n", ret); + goto exit; + } + + ret = ath10k_bmi_write_memory(ar, board_address, data, + min_t(u32, board_data_size, + data_len)); + if (ret) { + ath10k_err(ar, "could not write board data (%d)\n", ret); + goto exit; + } + + ret = ath10k_bmi_write32(ar, hi_board_data_initialized, 1); + if (ret) { + ath10k_err(ar, "could not write board data bit (%d)\n", ret); + goto exit; + } + + if (!ar->id.ext_bid_supported) + goto exit; + + /* Extended board data download */ + ret = ath10k_core_get_ext_board_id_from_otp(ar); + if (ret == -EOPNOTSUPP) { + /* Not fetching ext_board_data if ext board id is 0 */ + ath10k_dbg(ar, ATH10K_DBG_BOOT, "otp returned ext board id 0\n"); + return 0; + } else if (ret) { + ath10k_err(ar, "failed to get extended board id: %d\n", ret); + goto exit; + } + + ret = ath10k_core_fetch_board_file(ar, ATH10K_BD_IE_BOARD_EXT); + if (ret) + goto exit; + + if (ar->normal_mode_fw.ext_board_data) { + ext_board_address = board_address + EXT_BOARD_ADDRESS_OFFSET; + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot writing ext board data to addr 0x%x", + ext_board_address); + ret = ath10k_bmi_write_memory(ar, ext_board_address, + ar->normal_mode_fw.ext_board_data, + min_t(u32, eboard_data_size, data_len)); + if (ret) + ath10k_err(ar, "failed to write ext board data: %d\n", ret); + } + +exit: + return ret; +} + +static int ath10k_download_and_run_otp(struct ath10k *ar) +{ + u32 result, address = ar->hw_params.patch_load_addr; + u32 bmi_otp_exe_param = ar->hw_params.otp_exe_param; + int ret; + + ret = ath10k_download_board_data(ar, + ar->running_fw->board_data, + ar->running_fw->board_len); + if (ret) { + ath10k_err(ar, "failed to download board data: %d\n", ret); + return ret; + } + + /* OTP is optional */ + + if (!ar->running_fw->fw_file.otp_data || + !ar->running_fw->fw_file.otp_len) { + ath10k_warn(ar, "Not running otp, calibration will be incorrect (otp-data %pK otp_len %zd)!\n", + ar->running_fw->fw_file.otp_data, + ar->running_fw->fw_file.otp_len); + return 0; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot upload otp to 0x%x len %zd\n", + address, ar->running_fw->fw_file.otp_len); + + ret = ath10k_bmi_fast_download(ar, address, + ar->running_fw->fw_file.otp_data, + ar->running_fw->fw_file.otp_len); + if (ret) { + ath10k_err(ar, "could not write otp (%d)\n", ret); + return ret; + } + + /* As of now pre-cal is valid for 10_4 variants */ + if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || + ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE || + ar->cal_mode == ATH10K_PRE_CAL_MODE_NVMEM) + bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL; + + ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result); + if (ret) { + ath10k_err(ar, "could not execute otp (%d)\n", ret); + return ret; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result); + + if (!(skip_otp || test_bit(ATH10K_FW_FEATURE_IGNORE_OTP_RESULT, + ar->running_fw->fw_file.fw_features)) && + result != 0) { + ath10k_err(ar, "otp calibration failed: %d", result); + return -EINVAL; + } + + return 0; +} + +static int ath10k_download_cal_file(struct ath10k *ar, + const struct firmware *file) +{ + int ret; + + if (!file) + return -ENOENT; + + if (IS_ERR(file)) + return PTR_ERR(file); + + ret = ath10k_download_board_data(ar, file->data, file->size); + if (ret) { + ath10k_err(ar, "failed to download cal_file data: %d\n", ret); + return ret; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cal file downloaded\n"); + + return 0; +} + +static int ath10k_download_cal_dt(struct ath10k *ar, const char *dt_name) +{ + struct device_node *node; + int data_len; + void *data; + int ret; + + node = ar->dev->of_node; + if (!node) + /* Device Tree is optional, don't print any warnings if + * there's no node for ath10k. + */ + return -ENOENT; + + if (!of_get_property(node, dt_name, &data_len)) { + /* The calibration data node is optional */ + return -ENOENT; + } + + if (data_len != ar->hw_params.cal_data_len) { + ath10k_warn(ar, "invalid calibration data length in DT: %d\n", + data_len); + ret = -EMSGSIZE; + goto out; + } + + data = kmalloc(data_len, GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto out; + } + + ret = of_property_read_u8_array(node, dt_name, data, data_len); + if (ret) { + ath10k_warn(ar, "failed to read calibration data from DT: %d\n", + ret); + goto out_free; + } + + ret = ath10k_download_board_data(ar, data, data_len); + if (ret) { + ath10k_warn(ar, "failed to download calibration data from Device Tree: %d\n", + ret); + goto out_free; + } + + ret = 0; + +out_free: + kfree(data); + +out: + return ret; +} + +static int ath10k_download_cal_eeprom(struct ath10k *ar) +{ + size_t data_len; + void *data = NULL; + int ret; + + ret = ath10k_hif_fetch_cal_eeprom(ar, &data, &data_len); + if (ret) { + if (ret != -EOPNOTSUPP) + ath10k_warn(ar, "failed to read calibration data from EEPROM: %d\n", + ret); + goto out_free; + } + + ret = ath10k_download_board_data(ar, data, data_len); + if (ret) { + ath10k_warn(ar, "failed to download calibration data from EEPROM: %d\n", + ret); + goto out_free; + } + + ret = 0; + +out_free: + kfree(data); + + return ret; +} + +static int ath10k_download_cal_nvmem(struct ath10k *ar, const char *cell_name) +{ + struct nvmem_cell *cell; + void *buf; + size_t len; + int ret; + + cell = devm_nvmem_cell_get(ar->dev, cell_name); + if (IS_ERR(cell)) { + ret = PTR_ERR(cell); + return ret; + } + + buf = nvmem_cell_read(cell, &len); + if (IS_ERR(buf)) + return PTR_ERR(buf); + + if (ar->hw_params.cal_data_len != len) { + kfree(buf); + ath10k_warn(ar, "invalid calibration data length in nvmem-cell '%s': %zu != %u\n", + cell_name, len, ar->hw_params.cal_data_len); + return -EMSGSIZE; + } + + ret = ath10k_download_board_data(ar, buf, len); + kfree(buf); + if (ret) + ath10k_warn(ar, "failed to download calibration data from nvmem-cell '%s': %d\n", + cell_name, ret); + + return ret; +} + +int ath10k_core_fetch_firmware_api_n(struct ath10k *ar, const char *name, + struct ath10k_fw_file *fw_file) +{ + size_t magic_len, len, ie_len; + int ie_id, i, index, bit, ret; + struct ath10k_fw_ie *hdr; + const u8 *data; + __le32 *timestamp, *version; + + /* first fetch the firmware file (firmware-*.bin) */ + fw_file->firmware = ath10k_fetch_fw_file(ar, ar->hw_params.fw.dir, + name); + if (IS_ERR(fw_file->firmware)) + return PTR_ERR(fw_file->firmware); + + data = fw_file->firmware->data; + len = fw_file->firmware->size; + + /* magic also includes the null byte, check that as well */ + magic_len = strlen(ATH10K_FIRMWARE_MAGIC) + 1; + + if (len < magic_len) { + ath10k_err(ar, "firmware file '%s/%s' too small to contain magic: %zu\n", + ar->hw_params.fw.dir, name, len); + ret = -EINVAL; + goto err; + } + + if (memcmp(data, ATH10K_FIRMWARE_MAGIC, magic_len) != 0) { + ath10k_err(ar, "invalid firmware magic\n"); + ret = -EINVAL; + goto err; + } + + /* jump over the padding */ + magic_len = ALIGN(magic_len, 4); + + len -= magic_len; + data += magic_len; + + /* loop elements */ + while (len > sizeof(struct ath10k_fw_ie)) { + hdr = (struct ath10k_fw_ie *)data; + + ie_id = le32_to_cpu(hdr->id); + ie_len = le32_to_cpu(hdr->len); + + len -= sizeof(*hdr); + data += sizeof(*hdr); + + if (len < ie_len) { + ath10k_err(ar, "invalid length for FW IE %d (%zu < %zu)\n", + ie_id, len, ie_len); + ret = -EINVAL; + goto err; + } + + switch (ie_id) { + case ATH10K_FW_IE_FW_VERSION: + if (ie_len > sizeof(fw_file->fw_version) - 1) + break; + + memcpy(fw_file->fw_version, data, ie_len); + fw_file->fw_version[ie_len] = '\0'; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "found fw version %s\n", + fw_file->fw_version); + break; + case ATH10K_FW_IE_TIMESTAMP: + if (ie_len != sizeof(u32)) + break; + + timestamp = (__le32 *)data; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw timestamp %d\n", + le32_to_cpup(timestamp)); + break; + case ATH10K_FW_IE_FEATURES: + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "found firmware features ie (%zd B)\n", + ie_len); + + for (i = 0; i < ATH10K_FW_FEATURE_COUNT; i++) { + index = i / 8; + bit = i % 8; + + if (index == ie_len) + break; + + if (data[index] & (1 << bit)) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "Enabling feature bit: %i\n", + i); + __set_bit(i, fw_file->fw_features); + } + } + + ath10k_dbg_dump(ar, ATH10K_DBG_BOOT, "features", "", + fw_file->fw_features, + sizeof(fw_file->fw_features)); + break; + case ATH10K_FW_IE_FW_IMAGE: + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "found fw image ie (%zd B)\n", + ie_len); + + fw_file->firmware_data = data; + fw_file->firmware_len = ie_len; + + break; + case ATH10K_FW_IE_OTP_IMAGE: + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "found otp image ie (%zd B)\n", + ie_len); + + fw_file->otp_data = data; + fw_file->otp_len = ie_len; + + break; + case ATH10K_FW_IE_WMI_OP_VERSION: + if (ie_len != sizeof(u32)) + break; + + version = (__le32 *)data; + + fw_file->wmi_op_version = le32_to_cpup(version); + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie wmi op version %d\n", + fw_file->wmi_op_version); + break; + case ATH10K_FW_IE_HTT_OP_VERSION: + if (ie_len != sizeof(u32)) + break; + + version = (__le32 *)data; + + fw_file->htt_op_version = le32_to_cpup(version); + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "found fw ie htt op version %d\n", + fw_file->htt_op_version); + break; + case ATH10K_FW_IE_FW_CODE_SWAP_IMAGE: + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "found fw code swap image ie (%zd B)\n", + ie_len); + fw_file->codeswap_data = data; + fw_file->codeswap_len = ie_len; + break; + default: + ath10k_warn(ar, "Unknown FW IE: %u\n", + le32_to_cpu(hdr->id)); + break; + } + + /* jump over the padding */ + ie_len = ALIGN(ie_len, 4); + + len -= ie_len; + data += ie_len; + } + + if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, fw_file->fw_features) && + (!fw_file->firmware_data || !fw_file->firmware_len)) { + ath10k_warn(ar, "No ATH10K_FW_IE_FW_IMAGE found from '%s/%s', skipping\n", + ar->hw_params.fw.dir, name); + ret = -ENOMEDIUM; + goto err; + } + + return 0; + +err: + ath10k_core_free_firmware_files(ar); + return ret; +} + +static void ath10k_core_get_fw_name(struct ath10k *ar, char *fw_name, + size_t fw_name_len, int fw_api) +{ + switch (ar->hif.bus) { + case ATH10K_BUS_SDIO: + case ATH10K_BUS_USB: + scnprintf(fw_name, fw_name_len, "%s-%s-%d.bin", + ATH10K_FW_FILE_BASE, ath10k_bus_str(ar->hif.bus), + fw_api); + break; + case ATH10K_BUS_PCI: + case ATH10K_BUS_AHB: + case ATH10K_BUS_SNOC: + scnprintf(fw_name, fw_name_len, "%s-%d.bin", + ATH10K_FW_FILE_BASE, fw_api); + break; + } +} + +static int ath10k_core_fetch_firmware_files(struct ath10k *ar) +{ + int ret, i; + char fw_name[100]; + + /* calibration file is optional, don't check for any errors */ + ath10k_fetch_cal_file(ar); + + for (i = ATH10K_FW_API_MAX; i >= ATH10K_FW_API_MIN; i--) { + ar->fw_api = i; + ath10k_dbg(ar, ATH10K_DBG_BOOT, "trying fw api %d\n", + ar->fw_api); + + ath10k_core_get_fw_name(ar, fw_name, sizeof(fw_name), ar->fw_api); + ret = ath10k_core_fetch_firmware_api_n(ar, fw_name, + &ar->normal_mode_fw.fw_file); + if (!ret) + goto success; + } + + /* we end up here if we couldn't fetch any firmware */ + + ath10k_err(ar, "Failed to find firmware-N.bin (N between %d and %d) from %s: %d", + ATH10K_FW_API_MIN, ATH10K_FW_API_MAX, ar->hw_params.fw.dir, + ret); + + return ret; + +success: + ath10k_dbg(ar, ATH10K_DBG_BOOT, "using fw api %d\n", ar->fw_api); + + return 0; +} + +static int ath10k_core_pre_cal_download(struct ath10k *ar) +{ + int ret; + + ret = ath10k_download_cal_nvmem(ar, "pre-calibration"); + if (ret == 0) { + ar->cal_mode = ATH10K_PRE_CAL_MODE_NVMEM; + goto success; + } else if (ret == -EPROBE_DEFER) { + return ret; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot did not find a pre-calibration nvmem-cell, try file next: %d\n", + ret); + + ret = ath10k_download_cal_file(ar, ar->pre_cal_file); + if (ret == 0) { + ar->cal_mode = ATH10K_PRE_CAL_MODE_FILE; + goto success; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot did not find a pre calibration file, try DT next: %d\n", + ret); + + ret = ath10k_download_cal_dt(ar, "qcom,ath10k-pre-calibration-data"); + if (ret) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "unable to load pre cal data from DT: %d\n", ret); + return ret; + } + ar->cal_mode = ATH10K_PRE_CAL_MODE_DT; + +success: + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using calibration mode %s\n", + ath10k_cal_mode_str(ar->cal_mode)); + + return 0; +} + +static int ath10k_core_pre_cal_config(struct ath10k *ar) +{ + int ret; + + ret = ath10k_core_pre_cal_download(ar); + if (ret) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "failed to load pre cal data: %d\n", ret); + return ret; + } + + ret = ath10k_core_get_board_id_from_otp(ar); + if (ret) { + ath10k_err(ar, "failed to get board id: %d\n", ret); + return ret; + } + + ret = ath10k_download_and_run_otp(ar); + if (ret) { + ath10k_err(ar, "failed to run otp: %d\n", ret); + return ret; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "pre cal configuration done successfully\n"); + + return 0; +} + +static int ath10k_download_cal_data(struct ath10k *ar) +{ + int ret; + + ret = ath10k_core_pre_cal_config(ar); + if (ret == 0) + return 0; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "pre cal download procedure failed, try cal file: %d\n", + ret); + + ret = ath10k_download_cal_nvmem(ar, "calibration"); + if (ret == 0) { + ar->cal_mode = ATH10K_CAL_MODE_NVMEM; + goto done; + } else if (ret == -EPROBE_DEFER) { + return ret; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot did not find a calibration nvmem-cell, try file next: %d\n", + ret); + + ret = ath10k_download_cal_file(ar, ar->cal_file); + if (ret == 0) { + ar->cal_mode = ATH10K_CAL_MODE_FILE; + goto done; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot did not find a calibration file, try DT next: %d\n", + ret); + + ret = ath10k_download_cal_dt(ar, "qcom,ath10k-calibration-data"); + if (ret == 0) { + ar->cal_mode = ATH10K_CAL_MODE_DT; + goto done; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot did not find DT entry, try target EEPROM next: %d\n", + ret); + + ret = ath10k_download_cal_eeprom(ar); + if (ret == 0) { + ar->cal_mode = ATH10K_CAL_MODE_EEPROM; + goto done; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot did not find target EEPROM entry, try OTP next: %d\n", + ret); + + ret = ath10k_download_and_run_otp(ar); + if (ret) { + ath10k_err(ar, "failed to run otp: %d\n", ret); + return ret; + } + + ar->cal_mode = ATH10K_CAL_MODE_OTP; + +done: + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot using calibration mode %s\n", + ath10k_cal_mode_str(ar->cal_mode)); + return 0; +} + +static void ath10k_core_fetch_btcoex_dt(struct ath10k *ar) +{ + struct device_node *node; + u8 coex_support = 0; + int ret; + + node = ar->dev->of_node; + if (!node) + goto out; + + ret = of_property_read_u8(node, "qcom,coexist-support", &coex_support); + if (ret) { + ar->coex_support = true; + goto out; + } + + if (coex_support) { + ar->coex_support = true; + } else { + ar->coex_support = false; + ar->coex_gpio_pin = -1; + goto out; + } + + ret = of_property_read_u32(node, "qcom,coexist-gpio-pin", + &ar->coex_gpio_pin); + if (ret) + ar->coex_gpio_pin = -1; + +out: + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot coex_support %d coex_gpio_pin %d\n", + ar->coex_support, ar->coex_gpio_pin); +} + +static int ath10k_init_uart(struct ath10k *ar) +{ + int ret; + + /* + * Explicitly setting UART prints to zero as target turns it on + * based on scratch registers. + */ + ret = ath10k_bmi_write32(ar, hi_serial_enable, 0); + if (ret) { + ath10k_warn(ar, "could not disable UART prints (%d)\n", ret); + return ret; + } + + if (!uart_print) { + if (ar->hw_params.uart_pin_workaround) { + ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, + ar->hw_params.uart_pin); + if (ret) { + ath10k_warn(ar, "failed to set UART TX pin: %d", + ret); + return ret; + } + } + + return 0; + } + + ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, ar->hw_params.uart_pin); + if (ret) { + ath10k_warn(ar, "could not enable UART prints (%d)\n", ret); + return ret; + } + + ret = ath10k_bmi_write32(ar, hi_serial_enable, 1); + if (ret) { + ath10k_warn(ar, "could not enable UART prints (%d)\n", ret); + return ret; + } + + /* Set the UART baud rate to 19200. */ + ret = ath10k_bmi_write32(ar, hi_desired_baud_rate, 19200); + if (ret) { + ath10k_warn(ar, "could not set the baud rate (%d)\n", ret); + return ret; + } + + ath10k_info(ar, "UART prints enabled\n"); + return 0; +} + +static int ath10k_init_hw_params(struct ath10k *ar) +{ + const struct ath10k_hw_params *hw_params; + int i; + + for (i = 0; i < ARRAY_SIZE(ath10k_hw_params_list); i++) { + hw_params = &ath10k_hw_params_list[i]; + + if (hw_params->bus == ar->hif.bus && + hw_params->id == ar->target_version && + hw_params->dev_id == ar->dev_id) + break; + } + + if (i == ARRAY_SIZE(ath10k_hw_params_list)) { + ath10k_err(ar, "Unsupported hardware version: 0x%x\n", + ar->target_version); + return -EINVAL; + } + + ar->hw_params = *hw_params; + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "Hardware name %s version 0x%x\n", + ar->hw_params.name, ar->target_version); + + return 0; +} + +void ath10k_core_start_recovery(struct ath10k *ar) +{ + if (test_and_set_bit(ATH10K_FLAG_RESTARTING, &ar->dev_flags)) { + ath10k_warn(ar, "already restarting\n"); + return; + } + + queue_work(ar->workqueue, &ar->restart_work); +} +EXPORT_SYMBOL(ath10k_core_start_recovery); + +void ath10k_core_napi_enable(struct ath10k *ar) +{ + lockdep_assert_held(&ar->conf_mutex); + + if (test_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags)) + return; + + napi_enable(&ar->napi); + set_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags); +} +EXPORT_SYMBOL(ath10k_core_napi_enable); + +void ath10k_core_napi_sync_disable(struct ath10k *ar) +{ + lockdep_assert_held(&ar->conf_mutex); + + if (!test_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags)) + return; + + napi_synchronize(&ar->napi); + napi_disable(&ar->napi); + clear_bit(ATH10K_FLAG_NAPI_ENABLED, &ar->dev_flags); +} +EXPORT_SYMBOL(ath10k_core_napi_sync_disable); + +static void ath10k_core_restart(struct work_struct *work) +{ + struct ath10k *ar = container_of(work, struct ath10k, restart_work); + int ret; + + set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags); + + /* Place a barrier to make sure the compiler doesn't reorder + * CRASH_FLUSH and calling other functions. + */ + barrier(); + + ieee80211_stop_queues(ar->hw); + ath10k_drain_tx(ar); + complete(&ar->scan.started); + complete(&ar->scan.completed); + complete(&ar->scan.on_channel); + complete(&ar->offchan_tx_completed); + complete(&ar->install_key_done); + complete(&ar->vdev_setup_done); + complete(&ar->vdev_delete_done); + complete(&ar->thermal.wmi_sync); + complete(&ar->bss_survey_done); + wake_up(&ar->htt.empty_tx_wq); + wake_up(&ar->wmi.tx_credits_wq); + wake_up(&ar->peer_mapping_wq); + + /* TODO: We can have one instance of cancelling coverage_class_work by + * moving it to ath10k_halt(), so that both stop() and restart() would + * call that but it takes conf_mutex() and if we call cancel_work_sync() + * with conf_mutex it will deadlock. + */ + cancel_work_sync(&ar->set_coverage_class_work); + + mutex_lock(&ar->conf_mutex); + + switch (ar->state) { + case ATH10K_STATE_ON: + ar->state = ATH10K_STATE_RESTARTING; + ath10k_halt(ar); + ath10k_scan_finish(ar); + ieee80211_restart_hw(ar->hw); + break; + case ATH10K_STATE_OFF: + /* this can happen if driver is being unloaded + * or if the crash happens during FW probing + */ + ath10k_warn(ar, "cannot restart a device that hasn't been started\n"); + break; + case ATH10K_STATE_RESTARTING: + /* hw restart might be requested from multiple places */ + break; + case ATH10K_STATE_RESTARTED: + ar->state = ATH10K_STATE_WEDGED; + fallthrough; + case ATH10K_STATE_WEDGED: + ath10k_warn(ar, "device is wedged, will not restart\n"); + break; + case ATH10K_STATE_UTF: + ath10k_warn(ar, "firmware restart in UTF mode not supported\n"); + break; + } + + mutex_unlock(&ar->conf_mutex); + + ret = ath10k_coredump_submit(ar); + if (ret) + ath10k_warn(ar, "failed to send firmware crash dump via devcoredump: %d", + ret); + + complete(&ar->driver_recovery); +} + +static void ath10k_core_set_coverage_class_work(struct work_struct *work) +{ + struct ath10k *ar = container_of(work, struct ath10k, + set_coverage_class_work); + + if (ar->hw_params.hw_ops->set_coverage_class) + ar->hw_params.hw_ops->set_coverage_class(ar, -1); +} + +static int ath10k_core_init_firmware_features(struct ath10k *ar) +{ + struct ath10k_fw_file *fw_file = &ar->normal_mode_fw.fw_file; + int max_num_peers; + + if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, fw_file->fw_features) && + !test_bit(ATH10K_FW_FEATURE_WMI_10X, fw_file->fw_features)) { + ath10k_err(ar, "feature bits corrupted: 10.2 feature requires 10.x feature to be set as well"); + return -EINVAL; + } + + if (fw_file->wmi_op_version >= ATH10K_FW_WMI_OP_VERSION_MAX) { + ath10k_err(ar, "unsupported WMI OP version (max %d): %d\n", + ATH10K_FW_WMI_OP_VERSION_MAX, fw_file->wmi_op_version); + return -EINVAL; + } + + ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_NATIVE_WIFI; + switch (ath10k_cryptmode_param) { + case ATH10K_CRYPT_MODE_HW: + clear_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags); + clear_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags); + break; + case ATH10K_CRYPT_MODE_SW: + if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT, + fw_file->fw_features)) { + ath10k_err(ar, "cryptmode > 0 requires raw mode support from firmware"); + return -EINVAL; + } + + set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags); + set_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags); + break; + default: + ath10k_info(ar, "invalid cryptmode: %d\n", + ath10k_cryptmode_param); + return -EINVAL; + } + + ar->htt.max_num_amsdu = ATH10K_HTT_MAX_NUM_AMSDU_DEFAULT; + ar->htt.max_num_ampdu = ATH10K_HTT_MAX_NUM_AMPDU_DEFAULT; + + if (ath10k_frame_mode == ATH10K_HW_TXRX_RAW) { + if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT, + fw_file->fw_features)) { + ath10k_err(ar, "rawmode = 1 requires support from firmware"); + return -EINVAL; + } + set_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags); + } + + if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) { + ar->wmi.rx_decap_mode = ATH10K_HW_TXRX_RAW; + + /* Workaround: + * + * Firmware A-MSDU aggregation breaks with RAW Tx encap mode + * and causes enormous performance issues (malformed frames, + * etc). + * + * Disabling A-MSDU makes RAW mode stable with heavy traffic + * albeit a bit slower compared to regular operation. + */ + ar->htt.max_num_amsdu = 1; + } + + /* Backwards compatibility for firmwares without + * ATH10K_FW_IE_WMI_OP_VERSION. + */ + if (fw_file->wmi_op_version == ATH10K_FW_WMI_OP_VERSION_UNSET) { + if (test_bit(ATH10K_FW_FEATURE_WMI_10X, fw_file->fw_features)) { + if (test_bit(ATH10K_FW_FEATURE_WMI_10_2, + fw_file->fw_features)) + fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_10_2; + else + fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_10_1; + } else { + fw_file->wmi_op_version = ATH10K_FW_WMI_OP_VERSION_MAIN; + } + } + + switch (fw_file->wmi_op_version) { + case ATH10K_FW_WMI_OP_VERSION_MAIN: + max_num_peers = TARGET_NUM_PEERS; + ar->max_num_stations = TARGET_NUM_STATIONS; + ar->max_num_vdevs = TARGET_NUM_VDEVS; + ar->htt.max_num_pending_tx = TARGET_NUM_MSDU_DESC; + ar->fw_stats_req_mask = WMI_STAT_PDEV | WMI_STAT_VDEV | + WMI_STAT_PEER; + ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM; + break; + case ATH10K_FW_WMI_OP_VERSION_10_1: + case ATH10K_FW_WMI_OP_VERSION_10_2: + case ATH10K_FW_WMI_OP_VERSION_10_2_4: + if (ath10k_peer_stats_enabled(ar)) { + max_num_peers = TARGET_10X_TX_STATS_NUM_PEERS; + ar->max_num_stations = TARGET_10X_TX_STATS_NUM_STATIONS; + } else { + max_num_peers = TARGET_10X_NUM_PEERS; + ar->max_num_stations = TARGET_10X_NUM_STATIONS; + } + ar->max_num_vdevs = TARGET_10X_NUM_VDEVS; + ar->htt.max_num_pending_tx = TARGET_10X_NUM_MSDU_DESC; + ar->fw_stats_req_mask = WMI_STAT_PEER; + ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM; + break; + case ATH10K_FW_WMI_OP_VERSION_TLV: + max_num_peers = TARGET_TLV_NUM_PEERS; + ar->max_num_stations = TARGET_TLV_NUM_STATIONS; + ar->max_num_vdevs = TARGET_TLV_NUM_VDEVS; + ar->max_num_tdls_vdevs = TARGET_TLV_NUM_TDLS_VDEVS; + if (ar->hif.bus == ATH10K_BUS_SDIO) + ar->htt.max_num_pending_tx = + TARGET_TLV_NUM_MSDU_DESC_HL; + else + ar->htt.max_num_pending_tx = TARGET_TLV_NUM_MSDU_DESC; + ar->wow.max_num_patterns = TARGET_TLV_NUM_WOW_PATTERNS; + ar->fw_stats_req_mask = WMI_TLV_STAT_PDEV | WMI_TLV_STAT_VDEV | + WMI_TLV_STAT_PEER | WMI_TLV_STAT_PEER_EXTD; + ar->max_spatial_stream = WMI_MAX_SPATIAL_STREAM; + ar->wmi.mgmt_max_num_pending_tx = TARGET_TLV_MGMT_NUM_MSDU_DESC; + break; + case ATH10K_FW_WMI_OP_VERSION_10_4: + max_num_peers = TARGET_10_4_NUM_PEERS; + ar->max_num_stations = TARGET_10_4_NUM_STATIONS; + ar->num_active_peers = TARGET_10_4_ACTIVE_PEERS; + ar->max_num_vdevs = TARGET_10_4_NUM_VDEVS; + ar->num_tids = TARGET_10_4_TGT_NUM_TIDS; + ar->fw_stats_req_mask = WMI_10_4_STAT_PEER | + WMI_10_4_STAT_PEER_EXTD | + WMI_10_4_STAT_VDEV_EXTD; + ar->max_spatial_stream = ar->hw_params.max_spatial_stream; + ar->max_num_tdls_vdevs = TARGET_10_4_NUM_TDLS_VDEVS; + + if (test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL, + fw_file->fw_features)) + ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC_PFC; + else + ar->htt.max_num_pending_tx = TARGET_10_4_NUM_MSDU_DESC; + break; + case ATH10K_FW_WMI_OP_VERSION_UNSET: + case ATH10K_FW_WMI_OP_VERSION_MAX: + default: + WARN_ON(1); + return -EINVAL; + } + + if (ar->hw_params.num_peers) + ar->max_num_peers = ar->hw_params.num_peers; + else + ar->max_num_peers = max_num_peers; + + /* Backwards compatibility for firmwares without + * ATH10K_FW_IE_HTT_OP_VERSION. + */ + if (fw_file->htt_op_version == ATH10K_FW_HTT_OP_VERSION_UNSET) { + switch (fw_file->wmi_op_version) { + case ATH10K_FW_WMI_OP_VERSION_MAIN: + fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_MAIN; + break; + case ATH10K_FW_WMI_OP_VERSION_10_1: + case ATH10K_FW_WMI_OP_VERSION_10_2: + case ATH10K_FW_WMI_OP_VERSION_10_2_4: + fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_10_1; + break; + case ATH10K_FW_WMI_OP_VERSION_TLV: + fw_file->htt_op_version = ATH10K_FW_HTT_OP_VERSION_TLV; + break; + case ATH10K_FW_WMI_OP_VERSION_10_4: + case ATH10K_FW_WMI_OP_VERSION_UNSET: + case ATH10K_FW_WMI_OP_VERSION_MAX: + ath10k_err(ar, "htt op version not found from fw meta data"); + return -EINVAL; + } + } + + return 0; +} + +static int ath10k_core_reset_rx_filter(struct ath10k *ar) +{ + int ret; + int vdev_id; + int vdev_type; + int vdev_subtype; + const u8 *vdev_addr; + + vdev_id = 0; + vdev_type = WMI_VDEV_TYPE_STA; + vdev_subtype = ath10k_wmi_get_vdev_subtype(ar, WMI_VDEV_SUBTYPE_NONE); + vdev_addr = ar->mac_addr; + + ret = ath10k_wmi_vdev_create(ar, vdev_id, vdev_type, vdev_subtype, + vdev_addr); + if (ret) { + ath10k_err(ar, "failed to create dummy vdev: %d\n", ret); + return ret; + } + + ret = ath10k_wmi_vdev_delete(ar, vdev_id); + if (ret) { + ath10k_err(ar, "failed to delete dummy vdev: %d\n", ret); + return ret; + } + + /* WMI and HTT may use separate HIF pipes and are not guaranteed to be + * serialized properly implicitly. + * + * Moreover (most) WMI commands have no explicit acknowledges. It is + * possible to infer it implicitly by poking firmware with echo + * command - getting a reply means all preceding comments have been + * (mostly) processed. + * + * In case of vdev create/delete this is sufficient. + * + * Without this it's possible to end up with a race when HTT Rx ring is + * started before vdev create/delete hack is complete allowing a short + * window of opportunity to receive (and Tx ACK) a bunch of frames. + */ + ret = ath10k_wmi_barrier(ar); + if (ret) { + ath10k_err(ar, "failed to ping firmware: %d\n", ret); + return ret; + } + + return 0; +} + +static int ath10k_core_compat_services(struct ath10k *ar) +{ + struct ath10k_fw_file *fw_file = &ar->normal_mode_fw.fw_file; + + /* all 10.x firmware versions support thermal throttling but don't + * advertise the support via service flags so we have to hardcode + * it here + */ + switch (fw_file->wmi_op_version) { + case ATH10K_FW_WMI_OP_VERSION_10_1: + case ATH10K_FW_WMI_OP_VERSION_10_2: + case ATH10K_FW_WMI_OP_VERSION_10_2_4: + case ATH10K_FW_WMI_OP_VERSION_10_4: + set_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map); + break; + default: + break; + } + + return 0; +} + +#define TGT_IRAM_READ_PER_ITR (8 * 1024) + +static int ath10k_core_copy_target_iram(struct ath10k *ar) +{ + const struct ath10k_hw_mem_layout *hw_mem; + const struct ath10k_mem_region *tmp, *mem_region = NULL; + dma_addr_t paddr; + void *vaddr = NULL; + u8 num_read_itr; + int i, ret; + u32 len, remaining_len; + + /* copy target iram feature must work also when + * ATH10K_FW_CRASH_DUMP_RAM_DATA is disabled, so + * _ath10k_coredump_get_mem_layout() to accomplist that + */ + hw_mem = _ath10k_coredump_get_mem_layout(ar); + if (!hw_mem) + /* if CONFIG_DEV_COREDUMP is disabled we get NULL, then + * just silently disable the feature by doing nothing + */ + return 0; + + for (i = 0; i < hw_mem->region_table.size; i++) { + tmp = &hw_mem->region_table.regions[i]; + if (tmp->type == ATH10K_MEM_REGION_TYPE_REG) { + mem_region = tmp; + break; + } + } + + if (!mem_region) + return -ENOMEM; + + for (i = 0; i < ar->wmi.num_mem_chunks; i++) { + if (ar->wmi.mem_chunks[i].req_id == + WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID) { + vaddr = ar->wmi.mem_chunks[i].vaddr; + len = ar->wmi.mem_chunks[i].len; + break; + } + } + + if (!vaddr || !len) { + ath10k_warn(ar, "No allocated memory for IRAM back up"); + return -ENOMEM; + } + + len = (len < mem_region->len) ? len : mem_region->len; + paddr = mem_region->start; + num_read_itr = len / TGT_IRAM_READ_PER_ITR; + remaining_len = len % TGT_IRAM_READ_PER_ITR; + for (i = 0; i < num_read_itr; i++) { + ret = ath10k_hif_diag_read(ar, paddr, vaddr, + TGT_IRAM_READ_PER_ITR); + if (ret) { + ath10k_warn(ar, "failed to copy firmware IRAM contents: %d", + ret); + return ret; + } + + paddr += TGT_IRAM_READ_PER_ITR; + vaddr += TGT_IRAM_READ_PER_ITR; + } + + if (remaining_len) { + ret = ath10k_hif_diag_read(ar, paddr, vaddr, remaining_len); + if (ret) { + ath10k_warn(ar, "failed to copy firmware IRAM contents: %d", + ret); + return ret; + } + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "target IRAM back up completed\n"); + + return 0; +} + +int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, + const struct ath10k_fw_components *fw) +{ + int status; + u32 val; + + lockdep_assert_held(&ar->conf_mutex); + + clear_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags); + + ar->running_fw = fw; + + if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, + ar->running_fw->fw_file.fw_features)) { + ath10k_bmi_start(ar); + + /* Enable hardware clock to speed up firmware download */ + if (ar->hw_params.hw_ops->enable_pll_clk) { + status = ar->hw_params.hw_ops->enable_pll_clk(ar); + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot enable pll ret %d\n", + status); + } + + if (ath10k_init_configure_target(ar)) { + status = -EINVAL; + goto err; + } + + status = ath10k_download_cal_data(ar); + if (status) + goto err; + + /* Some of qca988x solutions are having global reset issue + * during target initialization. Bypassing PLL setting before + * downloading firmware and letting the SoC run on REF_CLK is + * fixing the problem. Corresponding firmware change is also + * needed to set the clock source once the target is + * initialized. + */ + if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT, + ar->running_fw->fw_file.fw_features)) { + status = ath10k_bmi_write32(ar, hi_skip_clock_init, 1); + if (status) { + ath10k_err(ar, "could not write to skip_clock_init: %d\n", + status); + goto err; + } + } + + status = ath10k_download_fw(ar); + if (status) + goto err; + + status = ath10k_init_uart(ar); + if (status) + goto err; + + if (ar->hif.bus == ATH10K_BUS_SDIO) { + status = ath10k_init_sdio(ar, mode); + if (status) { + ath10k_err(ar, "failed to init SDIO: %d\n", status); + goto err; + } + } + } + + ar->htc.htc_ops.target_send_suspend_complete = + ath10k_send_suspend_complete; + + status = ath10k_htc_init(ar); + if (status) { + ath10k_err(ar, "could not init HTC (%d)\n", status); + goto err; + } + + if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, + ar->running_fw->fw_file.fw_features)) { + status = ath10k_bmi_done(ar); + if (status) + goto err; + } + + status = ath10k_wmi_attach(ar); + if (status) { + ath10k_err(ar, "WMI attach failed: %d\n", status); + goto err; + } + + status = ath10k_htt_init(ar); + if (status) { + ath10k_err(ar, "failed to init htt: %d\n", status); + goto err_wmi_detach; + } + + status = ath10k_htt_tx_start(&ar->htt); + if (status) { + ath10k_err(ar, "failed to alloc htt tx: %d\n", status); + goto err_wmi_detach; + } + + /* If firmware indicates Full Rx Reorder support it must be used in a + * slightly different manner. Let HTT code know. + */ + ar->htt.rx_ring.in_ord_rx = !!(test_bit(WMI_SERVICE_RX_FULL_REORDER, + ar->wmi.svc_map)); + + status = ath10k_htt_rx_alloc(&ar->htt); + if (status) { + ath10k_err(ar, "failed to alloc htt rx: %d\n", status); + goto err_htt_tx_detach; + } + + status = ath10k_hif_start(ar); + if (status) { + ath10k_err(ar, "could not start HIF: %d\n", status); + goto err_htt_rx_detach; + } + + status = ath10k_htc_wait_target(&ar->htc); + if (status) { + ath10k_err(ar, "failed to connect to HTC: %d\n", status); + goto err_hif_stop; + } + + status = ath10k_hif_start_post(ar); + if (status) { + ath10k_err(ar, "failed to swap mailbox: %d\n", status); + goto err_hif_stop; + } + + if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { + status = ath10k_htt_connect(&ar->htt); + if (status) { + ath10k_err(ar, "failed to connect htt (%d)\n", status); + goto err_hif_stop; + } + } + + status = ath10k_wmi_connect(ar); + if (status) { + ath10k_err(ar, "could not connect wmi: %d\n", status); + goto err_hif_stop; + } + + status = ath10k_htc_start(&ar->htc); + if (status) { + ath10k_err(ar, "failed to start htc: %d\n", status); + goto err_hif_stop; + } + + if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { + status = ath10k_wmi_wait_for_service_ready(ar); + if (status) { + ath10k_warn(ar, "wmi service ready event not received"); + goto err_hif_stop; + } + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "firmware %s booted\n", + ar->hw->wiphy->fw_version); + + if (test_bit(ATH10K_FW_FEATURE_IRAM_RECOVERY, + ar->running_fw->fw_file.fw_features)) { + status = ath10k_core_copy_target_iram(ar); + if (status) { + ath10k_warn(ar, "failed to copy target iram contents: %d", + status); + goto err_hif_stop; + } + } + + if (test_bit(WMI_SERVICE_EXT_RES_CFG_SUPPORT, ar->wmi.svc_map) && + mode == ATH10K_FIRMWARE_MODE_NORMAL) { + val = 0; + if (ath10k_peer_stats_enabled(ar)) + val = WMI_10_4_PEER_STATS; + + /* Enable vdev stats by default */ + val |= WMI_10_4_VDEV_STATS; + + if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map)) + val |= WMI_10_4_BSS_CHANNEL_INFO_64; + + ath10k_core_fetch_btcoex_dt(ar); + + /* 10.4 firmware supports BT-Coex without reloading firmware + * via pdev param. To support Bluetooth coexistence pdev param, + * WMI_COEX_GPIO_SUPPORT of extended resource config should be + * enabled always. + * + * We can still enable BTCOEX if firmware has the support + * even though btceox_support value is + * ATH10K_DT_BTCOEX_NOT_FOUND + */ + + if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) && + test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM, + ar->running_fw->fw_file.fw_features) && + ar->coex_support) + val |= WMI_10_4_COEX_GPIO_SUPPORT; + + if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, + ar->wmi.svc_map)) + val |= WMI_10_4_TDLS_EXPLICIT_MODE_ONLY; + + if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, + ar->wmi.svc_map)) + val |= WMI_10_4_TDLS_UAPSD_BUFFER_STA; + + if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI, + ar->wmi.svc_map)) + val |= WMI_10_4_TX_DATA_ACK_RSSI; + + if (test_bit(WMI_SERVICE_REPORT_AIRTIME, ar->wmi.svc_map)) + val |= WMI_10_4_REPORT_AIRTIME; + + if (test_bit(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT, + ar->wmi.svc_map)) + val |= WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT; + + status = ath10k_mac_ext_resource_config(ar, val); + if (status) { + ath10k_err(ar, + "failed to send ext resource cfg command : %d\n", + status); + goto err_hif_stop; + } + } + + status = ath10k_wmi_cmd_init(ar); + if (status) { + ath10k_err(ar, "could not send WMI init command (%d)\n", + status); + goto err_hif_stop; + } + + status = ath10k_wmi_wait_for_unified_ready(ar); + if (status) { + ath10k_err(ar, "wmi unified ready event not received\n"); + goto err_hif_stop; + } + + status = ath10k_core_compat_services(ar); + if (status) { + ath10k_err(ar, "compat services failed: %d\n", status); + goto err_hif_stop; + } + + status = ath10k_wmi_pdev_set_base_macaddr(ar, ar->mac_addr); + if (status && status != -EOPNOTSUPP) { + ath10k_err(ar, + "failed to set base mac address: %d\n", status); + goto err_hif_stop; + } + + /* Some firmware revisions do not properly set up hardware rx filter + * registers. + * + * A known example from QCA9880 and 10.2.4 is that MAC_PCU_ADDR1_MASK + * is filled with 0s instead of 1s allowing HW to respond with ACKs to + * any frames that matches MAC_PCU_RX_FILTER which is also + * misconfigured to accept anything. + * + * The ADDR1 is programmed using internal firmware structure field and + * can't be (easily/sanely) reached from the driver explicitly. It is + * possible to implicitly make it correct by creating a dummy vdev and + * then deleting it. + */ + if (ar->hw_params.hw_filter_reset_required && + mode == ATH10K_FIRMWARE_MODE_NORMAL) { + status = ath10k_core_reset_rx_filter(ar); + if (status) { + ath10k_err(ar, + "failed to reset rx filter: %d\n", status); + goto err_hif_stop; + } + } + + status = ath10k_htt_rx_ring_refill(ar); + if (status) { + ath10k_err(ar, "failed to refill htt rx ring: %d\n", status); + goto err_hif_stop; + } + + if (ar->max_num_vdevs >= 64) + ar->free_vdev_map = 0xFFFFFFFFFFFFFFFFLL; + else + ar->free_vdev_map = (1LL << ar->max_num_vdevs) - 1; + + INIT_LIST_HEAD(&ar->arvifs); + + /* we don't care about HTT in UTF mode */ + if (mode == ATH10K_FIRMWARE_MODE_NORMAL) { + status = ath10k_htt_setup(&ar->htt); + if (status) { + ath10k_err(ar, "failed to setup htt: %d\n", status); + goto err_hif_stop; + } + } + + status = ath10k_debug_start(ar); + if (status) + goto err_hif_stop; + + status = ath10k_hif_set_target_log_mode(ar, fw_diag_log); + if (status && status != -EOPNOTSUPP) { + ath10k_warn(ar, "set target log mode failed: %d\n", status); + goto err_hif_stop; + } + + return 0; + +err_hif_stop: + ath10k_hif_stop(ar); +err_htt_rx_detach: + ath10k_htt_rx_free(&ar->htt); +err_htt_tx_detach: + ath10k_htt_tx_free(&ar->htt); +err_wmi_detach: + ath10k_wmi_detach(ar); +err: + return status; +} +EXPORT_SYMBOL(ath10k_core_start); + +int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt) +{ + int ret; + unsigned long time_left; + + reinit_completion(&ar->target_suspend); + + ret = ath10k_wmi_pdev_suspend_target(ar, suspend_opt); + if (ret) { + ath10k_warn(ar, "could not suspend target (%d)\n", ret); + return ret; + } + + time_left = wait_for_completion_timeout(&ar->target_suspend, 1 * HZ); + + if (!time_left) { + ath10k_warn(ar, "suspend timed out - target pause event never came\n"); + return -ETIMEDOUT; + } + + return 0; +} + +void ath10k_core_stop(struct ath10k *ar) +{ + lockdep_assert_held(&ar->conf_mutex); + ath10k_debug_stop(ar); + + /* try to suspend target */ + if (ar->state != ATH10K_STATE_RESTARTING && + ar->state != ATH10K_STATE_UTF) + ath10k_wait_for_suspend(ar, WMI_PDEV_SUSPEND_AND_DISABLE_INTR); + + ath10k_hif_stop(ar); + ath10k_htt_tx_stop(&ar->htt); + ath10k_htt_rx_free(&ar->htt); + ath10k_wmi_detach(ar); + + ar->id.bmi_ids_valid = false; +} +EXPORT_SYMBOL(ath10k_core_stop); + +/* mac80211 manages fw/hw initialization through start/stop hooks. However in + * order to know what hw capabilities should be advertised to mac80211 it is + * necessary to load the firmware (and tear it down immediately since start + * hook will try to init it again) before registering + */ +static int ath10k_core_probe_fw(struct ath10k *ar) +{ + struct bmi_target_info target_info; + int ret = 0; + + ret = ath10k_hif_power_up(ar, ATH10K_FIRMWARE_MODE_NORMAL); + if (ret) { + ath10k_err(ar, "could not power on hif bus (%d)\n", ret); + return ret; + } + + switch (ar->hif.bus) { + case ATH10K_BUS_SDIO: + memset(&target_info, 0, sizeof(target_info)); + ret = ath10k_bmi_get_target_info_sdio(ar, &target_info); + if (ret) { + ath10k_err(ar, "could not get target info (%d)\n", ret); + goto err_power_down; + } + ar->target_version = target_info.version; + ar->hw->wiphy->hw_version = target_info.version; + break; + case ATH10K_BUS_PCI: + case ATH10K_BUS_AHB: + case ATH10K_BUS_USB: + memset(&target_info, 0, sizeof(target_info)); + ret = ath10k_bmi_get_target_info(ar, &target_info); + if (ret) { + ath10k_err(ar, "could not get target info (%d)\n", ret); + goto err_power_down; + } + ar->target_version = target_info.version; + ar->hw->wiphy->hw_version = target_info.version; + break; + case ATH10K_BUS_SNOC: + memset(&target_info, 0, sizeof(target_info)); + ret = ath10k_hif_get_target_info(ar, &target_info); + if (ret) { + ath10k_err(ar, "could not get target info (%d)\n", ret); + goto err_power_down; + } + ar->target_version = target_info.version; + ar->hw->wiphy->hw_version = target_info.version; + break; + default: + ath10k_err(ar, "incorrect hif bus type: %d\n", ar->hif.bus); + } + + ret = ath10k_init_hw_params(ar); + if (ret) { + ath10k_err(ar, "could not get hw params (%d)\n", ret); + goto err_power_down; + } + + ret = ath10k_core_fetch_firmware_files(ar); + if (ret) { + ath10k_err(ar, "could not fetch firmware files (%d)\n", ret); + goto err_power_down; + } + + BUILD_BUG_ON(sizeof(ar->hw->wiphy->fw_version) != + sizeof(ar->normal_mode_fw.fw_file.fw_version)); + memcpy(ar->hw->wiphy->fw_version, ar->normal_mode_fw.fw_file.fw_version, + sizeof(ar->hw->wiphy->fw_version)); + + ath10k_debug_print_hwfw_info(ar); + + if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, + ar->normal_mode_fw.fw_file.fw_features)) { + ret = ath10k_core_pre_cal_download(ar); + if (ret) { + /* pre calibration data download is not necessary + * for all the chipsets. Ignore failures and continue. + */ + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "could not load pre cal data: %d\n", ret); + } + + ret = ath10k_core_get_board_id_from_otp(ar); + if (ret && ret != -EOPNOTSUPP) { + ath10k_err(ar, "failed to get board id from otp: %d\n", + ret); + goto err_free_firmware_files; + } + + ret = ath10k_core_check_smbios(ar); + if (ret) + ath10k_dbg(ar, ATH10K_DBG_BOOT, "SMBIOS bdf variant name not set.\n"); + + ret = ath10k_core_check_dt(ar); + if (ret) + ath10k_dbg(ar, ATH10K_DBG_BOOT, "DT bdf variant name not set.\n"); + + ret = ath10k_core_fetch_board_file(ar, ATH10K_BD_IE_BOARD); + if (ret) { + ath10k_err(ar, "failed to fetch board file: %d\n", ret); + goto err_free_firmware_files; + } + + ath10k_debug_print_board_info(ar); + } + + device_get_mac_address(ar->dev, ar->mac_addr); + + ret = ath10k_core_init_firmware_features(ar); + if (ret) { + ath10k_err(ar, "fatal problem with firmware features: %d\n", + ret); + goto err_free_firmware_files; + } + + if (!test_bit(ATH10K_FW_FEATURE_NON_BMI, + ar->normal_mode_fw.fw_file.fw_features)) { + ret = ath10k_swap_code_seg_init(ar, + &ar->normal_mode_fw.fw_file); + if (ret) { + ath10k_err(ar, "failed to initialize code swap segment: %d\n", + ret); + goto err_free_firmware_files; + } + } + + mutex_lock(&ar->conf_mutex); + + ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL, + &ar->normal_mode_fw); + if (ret) { + ath10k_err(ar, "could not init core (%d)\n", ret); + goto err_unlock; + } + + ath10k_debug_print_boot_info(ar); + ath10k_core_stop(ar); + + mutex_unlock(&ar->conf_mutex); + + ath10k_hif_power_down(ar); + return 0; + +err_unlock: + mutex_unlock(&ar->conf_mutex); + +err_free_firmware_files: + ath10k_core_free_firmware_files(ar); + +err_power_down: + ath10k_hif_power_down(ar); + + return ret; +} + +static void ath10k_core_register_work(struct work_struct *work) +{ + struct ath10k *ar = container_of(work, struct ath10k, register_work); + int status; + + /* peer stats are enabled by default */ + set_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags); + + status = ath10k_core_probe_fw(ar); + if (status) { + ath10k_err(ar, "could not probe fw (%d)\n", status); + goto err; + } + + status = ath10k_mac_register(ar); + if (status) { + ath10k_err(ar, "could not register to mac80211 (%d)\n", status); + goto err_release_fw; + } + + status = ath10k_coredump_register(ar); + if (status) { + ath10k_err(ar, "unable to register coredump\n"); + goto err_unregister_mac; + } + + status = ath10k_debug_register(ar); + if (status) { + ath10k_err(ar, "unable to initialize debugfs\n"); + goto err_unregister_coredump; + } + + status = ath10k_spectral_create(ar); + if (status) { + ath10k_err(ar, "failed to initialize spectral\n"); + goto err_debug_destroy; + } + + status = ath10k_thermal_register(ar); + if (status) { + ath10k_err(ar, "could not register thermal device: %d\n", + status); + goto err_spectral_destroy; + } + + set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags); + return; + +err_spectral_destroy: + ath10k_spectral_destroy(ar); +err_debug_destroy: + ath10k_debug_destroy(ar); +err_unregister_coredump: + ath10k_coredump_unregister(ar); +err_unregister_mac: + ath10k_mac_unregister(ar); +err_release_fw: + ath10k_core_free_firmware_files(ar); +err: + /* TODO: It's probably a good idea to release device from the driver + * but calling device_release_driver() here will cause a deadlock. + */ + return; +} + +int ath10k_core_register(struct ath10k *ar, + const struct ath10k_bus_params *bus_params) +{ + ar->bus_param = *bus_params; + + queue_work(ar->workqueue, &ar->register_work); + + return 0; +} +EXPORT_SYMBOL(ath10k_core_register); + +void ath10k_core_unregister(struct ath10k *ar) +{ + cancel_work_sync(&ar->register_work); + + if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags)) + return; + + ath10k_thermal_unregister(ar); + /* Stop spectral before unregistering from mac80211 to remove the + * relayfs debugfs file cleanly. Otherwise the parent debugfs tree + * would be already be free'd recursively, leading to a double free. + */ + ath10k_spectral_destroy(ar); + + /* We must unregister from mac80211 before we stop HTC and HIF. + * Otherwise we will fail to submit commands to FW and mac80211 will be + * unhappy about callback failures. + */ + ath10k_mac_unregister(ar); + + ath10k_testmode_destroy(ar); + + ath10k_core_free_firmware_files(ar); + ath10k_core_free_board_files(ar); + + ath10k_debug_unregister(ar); +} +EXPORT_SYMBOL(ath10k_core_unregister); + +struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, + enum ath10k_bus bus, + enum ath10k_hw_rev hw_rev, + const struct ath10k_hif_ops *hif_ops) +{ + struct ath10k *ar; + int ret; + + ar = ath10k_mac_create(priv_size); + if (!ar) + return NULL; + + ar->ath_common.priv = ar; + ar->ath_common.hw = ar->hw; + ar->dev = dev; + ar->hw_rev = hw_rev; + ar->hif.ops = hif_ops; + ar->hif.bus = bus; + + switch (hw_rev) { + case ATH10K_HW_QCA988X: + case ATH10K_HW_QCA9887: + ar->regs = &qca988x_regs; + ar->hw_ce_regs = &qcax_ce_regs; + ar->hw_values = &qca988x_values; + break; + case ATH10K_HW_QCA6174: + case ATH10K_HW_QCA9377: + ar->regs = &qca6174_regs; + ar->hw_ce_regs = &qcax_ce_regs; + ar->hw_values = &qca6174_values; + break; + case ATH10K_HW_QCA99X0: + case ATH10K_HW_QCA9984: + ar->regs = &qca99x0_regs; + ar->hw_ce_regs = &qcax_ce_regs; + ar->hw_values = &qca99x0_values; + break; + case ATH10K_HW_QCA9888: + ar->regs = &qca99x0_regs; + ar->hw_ce_regs = &qcax_ce_regs; + ar->hw_values = &qca9888_values; + break; + case ATH10K_HW_QCA4019: + ar->regs = &qca4019_regs; + ar->hw_ce_regs = &qcax_ce_regs; + ar->hw_values = &qca4019_values; + break; + case ATH10K_HW_WCN3990: + ar->regs = &wcn3990_regs; + ar->hw_ce_regs = &wcn3990_ce_regs; + ar->hw_values = &wcn3990_values; + break; + default: + ath10k_err(ar, "unsupported core hardware revision %d\n", + hw_rev); + ret = -ENOTSUPP; + goto err_free_mac; + } + + init_completion(&ar->scan.started); + init_completion(&ar->scan.completed); + init_completion(&ar->scan.on_channel); + init_completion(&ar->target_suspend); + init_completion(&ar->driver_recovery); + init_completion(&ar->wow.wakeup_completed); + + init_completion(&ar->install_key_done); + init_completion(&ar->vdev_setup_done); + init_completion(&ar->vdev_delete_done); + init_completion(&ar->thermal.wmi_sync); + init_completion(&ar->bss_survey_done); + init_completion(&ar->peer_delete_done); + init_completion(&ar->peer_stats_info_complete); + + INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work); + + ar->workqueue = create_singlethread_workqueue("ath10k_wq"); + if (!ar->workqueue) + goto err_free_mac; + + ar->workqueue_aux = create_singlethread_workqueue("ath10k_aux_wq"); + if (!ar->workqueue_aux) + goto err_free_wq; + + ar->workqueue_tx_complete = + create_singlethread_workqueue("ath10k_tx_complete_wq"); + if (!ar->workqueue_tx_complete) + goto err_free_aux_wq; + + mutex_init(&ar->conf_mutex); + mutex_init(&ar->dump_mutex); + spin_lock_init(&ar->data_lock); + + for (int ac = 0; ac < IEEE80211_NUM_ACS; ac++) + spin_lock_init(&ar->queue_lock[ac]); + + INIT_LIST_HEAD(&ar->peers); + init_waitqueue_head(&ar->peer_mapping_wq); + init_waitqueue_head(&ar->htt.empty_tx_wq); + init_waitqueue_head(&ar->wmi.tx_credits_wq); + + skb_queue_head_init(&ar->htt.rx_indication_head); + + init_completion(&ar->offchan_tx_completed); + INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work); + skb_queue_head_init(&ar->offchan_tx_queue); + + INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work); + skb_queue_head_init(&ar->wmi_mgmt_tx_queue); + + INIT_WORK(&ar->register_work, ath10k_core_register_work); + INIT_WORK(&ar->restart_work, ath10k_core_restart); + INIT_WORK(&ar->set_coverage_class_work, + ath10k_core_set_coverage_class_work); + + init_dummy_netdev(&ar->napi_dev); + + ret = ath10k_coredump_create(ar); + if (ret) + goto err_free_tx_complete; + + ret = ath10k_debug_create(ar); + if (ret) + goto err_free_coredump; + + return ar; + +err_free_coredump: + ath10k_coredump_destroy(ar); +err_free_tx_complete: + destroy_workqueue(ar->workqueue_tx_complete); +err_free_aux_wq: + destroy_workqueue(ar->workqueue_aux); +err_free_wq: + destroy_workqueue(ar->workqueue); +err_free_mac: + ath10k_mac_destroy(ar); + + return NULL; +} +EXPORT_SYMBOL(ath10k_core_create); + +void ath10k_core_destroy(struct ath10k *ar) +{ + destroy_workqueue(ar->workqueue); + + destroy_workqueue(ar->workqueue_aux); + + destroy_workqueue(ar->workqueue_tx_complete); + + ath10k_debug_destroy(ar); + ath10k_coredump_destroy(ar); + ath10k_htt_tx_destroy(&ar->htt); + ath10k_wmi_free_host_mem(ar); + ath10k_mac_destroy(ar); +} +EXPORT_SYMBOL(ath10k_core_destroy); + +MODULE_AUTHOR("Qualcomm Atheros"); +MODULE_DESCRIPTION("Core module for Qualcomm Atheros 802.11ac wireless LAN cards."); +MODULE_LICENSE("Dual BSD/GPL"); |