diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/gpio.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/gpio.c | 213 |
1 files changed, 213 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/gpio.c b/drivers/net/wireless/ath/ath5k/gpio.c new file mode 100644 index 000000000..73d3dd8a3 --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/gpio.c @@ -0,0 +1,213 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/****************\ + GPIO Functions +\****************/ + +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + + +/** + * DOC: GPIO/LED functions + * + * Here we control the 6 bidirectional GPIO pins provided by the hw. + * We can set a GPIO pin to be an input or an output pin on GPIO control + * register and then read or set its status from GPIO data input/output + * registers. + * + * We also control the two LED pins provided by the hw, LED_0 is our + * "power" LED and LED_1 is our "network activity" LED but many scenarios + * are available from hw. Vendors might also provide LEDs connected to the + * GPIO pins, we handle them through the LED subsystem on led.c + */ + + +/** + * ath5k_hw_set_ledstate() - Set led state + * @ah: The &struct ath5k_hw + * @state: One of AR5K_LED_* + * + * Used to set the LED blinking state. This only + * works for the LED connected to the LED_0, LED_1 pins, + * not the GPIO based. + */ +void +ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state) +{ + u32 led; + /*5210 has different led mode handling*/ + u32 led_5210; + + /*Reset led status*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_LEDMODE | AR5K_PCICFG_LED); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED); + + /* + * Some blinking values, define at your wish + */ + switch (state) { + case AR5K_LED_SCAN: + case AR5K_LED_AUTH: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND; + led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL; + break; + + case AR5K_LED_INIT: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + + case AR5K_LED_ASSOC: + case AR5K_LED_RUN: + led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC; + led_5210 = AR5K_PCICFG_LED_ASSOC; + break; + + default: + led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE; + led_5210 = AR5K_PCICFG_LED_PEND; + break; + } + + /*Write new status to the register*/ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led); + else + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210); +} + +/** + * ath5k_hw_set_gpio_input() - Set GPIO inputs + * @ah: The &struct ath5k_hw + * @gpio: GPIO pin to set as input + */ +int +ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) +{ + if (gpio >= AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); + + return 0; +} + +/** + * ath5k_hw_set_gpio_output() - Set GPIO outputs + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to set as output + */ +int +ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) +{ + if (gpio >= AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); + + return 0; +} + +/** + * ath5k_hw_get_gpio() - Get GPIO state + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to read + */ +u32 +ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) +{ + if (gpio >= AR5K_NUM_GPIO) + return 0xffffffff; + + /* GPIO input magic */ + return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & + 0x1; +} + +/** + * ath5k_hw_set_gpio() - Set GPIO state + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to set + * @val: Value to set (boolean) + */ +int +ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) +{ + u32 data; + + if (gpio >= AR5K_NUM_GPIO) + return -EINVAL; + + /* GPIO output magic */ + data = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + data &= ~(1 << gpio); + data |= (val & 1) << gpio; + + ath5k_hw_reg_write(ah, data, AR5K_GPIODO); + + return 0; +} + +/** + * ath5k_hw_set_gpio_intr() - Initialize the GPIO interrupt (RFKill switch) + * @ah: The &struct ath5k_hw + * @gpio: The GPIO pin to use + * @interrupt_level: True to generate interrupt on active pin (high) + * + * This function is used to set up the GPIO interrupt for the hw RFKill switch. + * That switch is connected to a GPIO pin and it's number is stored on EEPROM. + * It can either open or close the circuit to indicate that we should disable + * RF/Wireless to save power (we also get that from EEPROM). + */ +void +ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, + u32 interrupt_level) +{ + u32 data; + + if (gpio >= AR5K_NUM_GPIO) + return; + + /* + * Set the GPIO interrupt + */ + data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & + ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | + AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | + (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); + + ath5k_hw_reg_write(ah, interrupt_level ? data : + (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); + + ah->ah_imr |= AR5K_IMR_GPIO; + + /* Enable GPIO interrupts */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); +} + |