diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/reset.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/reset.c | 1380 |
1 files changed, 1380 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c new file mode 100644 index 000000000..9fdb5283b --- /dev/null +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -0,0 +1,1380 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/****************************\ + Reset function and helpers +\****************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <asm/unaligned.h> + +#include <linux/pci.h> /* To determine if a card is pci-e */ +#include <linux/log2.h> +#include <linux/platform_device.h> +#include "ath5k.h" +#include "reg.h" +#include "debug.h" + + +/** + * DOC: Reset function and helpers + * + * Here we implement the main reset routine, used to bring the card + * to a working state and ready to receive. We also handle routines + * that don't fit on other places such as clock, sleep and power control + */ + + +/******************\ +* Helper functions * +\******************/ + +/** + * ath5k_hw_register_timeout() - Poll a register for a flag/field change + * @ah: The &struct ath5k_hw + * @reg: The register to read + * @flag: The flag/field to check on the register + * @val: The field value we expect (if we check a field) + * @is_set: Instead of checking if the flag got cleared, check if it got set + * + * Some registers contain flags that indicate that an operation is + * running. We use this function to poll these registers and check + * if these flags get cleared. We also use it to poll a register + * field (containing multiple flags) until it gets a specific value. + * + * Returns -EAGAIN if we exceeded AR5K_TUNE_REGISTER_TIMEOUT * 15us or 0 + */ +int +ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, + bool is_set) +{ + int i; + u32 data; + + for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { + data = ath5k_hw_reg_read(ah, reg); + if (is_set && (data & flag)) + break; + else if ((data & flag) == val) + break; + udelay(15); + } + + return (i <= 0) ? -EAGAIN : 0; +} + + +/*************************\ +* Clock related functions * +\*************************/ + +/** + * ath5k_hw_htoclock() - Translate usec to hw clock units + * @ah: The &struct ath5k_hw + * @usec: value in microseconds + * + * Translate usecs to hw clock units based on the current + * hw clock rate. + * + * Returns number of clock units + */ +unsigned int +ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec) +{ + struct ath_common *common = ath5k_hw_common(ah); + return usec * common->clockrate; +} + +/** + * ath5k_hw_clocktoh() - Translate hw clock units to usec + * @ah: The &struct ath5k_hw + * @clock: value in hw clock units + * + * Translate hw clock units to usecs based on the current + * hw clock rate. + * + * Returns number of usecs + */ +unsigned int +ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock) +{ + struct ath_common *common = ath5k_hw_common(ah); + return clock / common->clockrate; +} + +/** + * ath5k_hw_init_core_clock() - Initialize core clock + * @ah: The &struct ath5k_hw + * + * Initialize core clock parameters (usec, usec32, latencies etc), + * based on current bwmode and chipset properties. + */ +static void +ath5k_hw_init_core_clock(struct ath5k_hw *ah) +{ + struct ieee80211_channel *channel = ah->ah_current_channel; + struct ath_common *common = ath5k_hw_common(ah); + u32 usec_reg, txlat, rxlat, usec, clock, sclock, txf2txs; + + /* + * Set core clock frequency + */ + switch (channel->hw_value) { + case AR5K_MODE_11A: + clock = 40; + break; + case AR5K_MODE_11B: + clock = 22; + break; + case AR5K_MODE_11G: + default: + clock = 44; + break; + } + + /* Use clock multiplier for non-default + * bwmode */ + switch (ah->ah_bwmode) { + case AR5K_BWMODE_40MHZ: + clock *= 2; + break; + case AR5K_BWMODE_10MHZ: + clock /= 2; + break; + case AR5K_BWMODE_5MHZ: + clock /= 4; + break; + default: + break; + } + + common->clockrate = clock; + + /* + * Set USEC parameters + */ + /* Set USEC counter on PCU*/ + usec = clock - 1; + usec = AR5K_REG_SM(usec, AR5K_USEC_1); + + /* Set usec duration on DCU */ + if (ah->ah_version != AR5K_AR5210) + AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC, + AR5K_DCU_GBL_IFS_MISC_USEC_DUR, + clock); + + /* Set 32MHz USEC counter */ + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF2413) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_radio == AR5K_RF2317)) + /* Remain on 40MHz clock ? */ + sclock = 40 - 1; + else + sclock = 32 - 1; + sclock = AR5K_REG_SM(sclock, AR5K_USEC_32); + + /* + * Set tx/rx latencies + */ + usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211); + txlat = AR5K_REG_MS(usec_reg, AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_MS(usec_reg, AR5K_USEC_RX_LATENCY_5211); + + /* + * Set default Tx frame to Tx data start delay + */ + txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT; + + /* + * 5210 initvals don't include usec settings + * so we need to use magic values here for + * tx/rx latencies + */ + if (ah->ah_version == AR5K_AR5210) { + /* same for turbo */ + txlat = AR5K_INIT_TX_LATENCY_5210; + rxlat = AR5K_INIT_RX_LATENCY_5210; + } + + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + /* 5311 has different tx/rx latency masks + * from 5211, since we deal 5311 the same + * as 5211 when setting initvals, shift + * values here to their proper locations + * + * Note: Initvals indicate tx/rx/ latencies + * are the same for turbo mode */ + txlat = AR5K_REG_SM(txlat, AR5K_USEC_TX_LATENCY_5210); + rxlat = AR5K_REG_SM(rxlat, AR5K_USEC_RX_LATENCY_5210); + } else + switch (ah->ah_bwmode) { + case AR5K_BWMODE_10MHZ: + txlat = AR5K_REG_SM(txlat * 2, + AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_10MHZ; + break; + case AR5K_BWMODE_5MHZ: + txlat = AR5K_REG_SM(txlat * 4, + AR5K_USEC_TX_LATENCY_5211); + rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_5MHZ; + break; + case AR5K_BWMODE_40MHZ: + txlat = AR5K_INIT_TX_LAT_MIN; + rxlat = AR5K_REG_SM(rxlat / 2, + AR5K_USEC_RX_LATENCY_5211); + txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT; + break; + default: + break; + } + + usec_reg = (usec | sclock | txlat | rxlat); + ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC); + + /* On 5112 set tx frame to tx data start delay */ + if (ah->ah_radio == AR5K_RF5112) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2, + AR5K_PHY_RF_CTL2_TXF2TXD_START, + txf2txs); + } +} + +/** + * ath5k_hw_set_sleep_clock() - Setup sleep clock operation + * @ah: The &struct ath5k_hw + * @enable: Enable sleep clock operation (false to disable) + * + * If there is an external 32KHz crystal available, use it + * as ref. clock instead of 32/40MHz clock and baseband clocks + * to save power during sleep or restore normal 32/40MHz + * operation. + * + * NOTE: When operating on 32KHz certain PHY registers (27 - 31, + * 123 - 127) require delay on access. + */ +static void +ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 scal, spending, sclock; + + /* Only set 32KHz settings if we have an external + * 32KHz crystal present */ + if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) || + AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) && + enable) { + + /* 1 usec/cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1); + /* Set up tsf increment on each cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61); + + /* Set baseband sleep control registers + * and sleep control rate */ + ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + spending = 0x14; + else + spending = 0x18; + ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { + ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY); + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02); + } else { + ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT); + ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY); + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03); + } + + /* Enable sleep clock operation */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_EN); + + } else { + + /* Disable sleep clock operation and + * restore default parameters */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_EN); + + AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG, + AR5K_PCICFG_SLEEP_CLOCK_RATE, 0); + + /* Set DAC/ADC delays */ + ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR); + ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT); + + if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) + scal = AR5K_PHY_SCAL_32MHZ_2417; + else if (ee->ee_is_hb63) + scal = AR5K_PHY_SCAL_32MHZ_HB63; + else + scal = AR5K_PHY_SCAL_32MHZ; + ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL); + + ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); + ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + spending = 0x14; + else + spending = 0x18; + ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING); + + /* Set up tsf increment on each cycle */ + AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1); + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2316) || + (ah->ah_radio == AR5K_RF2317)) + sclock = 40 - 1; + else + sclock = 32 - 1; + AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, sclock); + } +} + + +/*********************\ +* Reset/Sleep control * +\*********************/ + +/** + * ath5k_hw_nic_reset() - Reset the various chipset units + * @ah: The &struct ath5k_hw + * @val: Mask to indicate what units to reset + * + * To reset the various chipset units we need to write + * the mask to AR5K_RESET_CTL and poll the register until + * all flags are cleared. + * + * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) + */ +static int +ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) +{ + int ret; + u32 mask = val ? val : ~0U; + + /* Read-and-clear RX Descriptor Pointer*/ + ath5k_hw_reg_read(ah, AR5K_RXDP); + + /* + * Reset the device and wait until success + */ + ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); + + /* Wait at least 128 PCI clocks */ + usleep_range(15, 20); + + if (ah->ah_version == AR5K_AR5210) { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA + | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA + | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; + } else { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + } + + ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false); + + /* + * Reset configuration register (for hw byte-swap). Note that this + * is only set for big endian. We do the necessary magic in + * AR5K_INIT_CFG. + */ + if ((val & AR5K_RESET_CTL_PCU) == 0) + ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); + + return ret; +} + +/** + * ath5k_hw_wisoc_reset() - Reset AHB chipset + * @ah: The &struct ath5k_hw + * @flags: Mask to indicate what units to reset + * + * Same as ath5k_hw_nic_reset but for AHB based devices + * + * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout) + */ +static int +ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags) +{ + u32 mask = flags ? flags : ~0U; + u32 __iomem *reg; + u32 regval; + u32 val = 0; + + /* ah->ah_mac_srev is not available at this point yet */ + if (ah->devid >= AR5K_SREV_AR2315_R6) { + reg = (u32 __iomem *) AR5K_AR2315_RESET; + if (mask & AR5K_RESET_CTL_PCU) + val |= AR5K_AR2315_RESET_WMAC; + if (mask & AR5K_RESET_CTL_BASEBAND) + val |= AR5K_AR2315_RESET_BB_WARM; + } else { + reg = (u32 __iomem *) AR5K_AR5312_RESET; + if (to_platform_device(ah->dev)->id == 0) { + if (mask & AR5K_RESET_CTL_PCU) + val |= AR5K_AR5312_RESET_WMAC0; + if (mask & AR5K_RESET_CTL_BASEBAND) + val |= AR5K_AR5312_RESET_BB0_COLD | + AR5K_AR5312_RESET_BB0_WARM; + } else { + if (mask & AR5K_RESET_CTL_PCU) + val |= AR5K_AR5312_RESET_WMAC1; + if (mask & AR5K_RESET_CTL_BASEBAND) + val |= AR5K_AR5312_RESET_BB1_COLD | + AR5K_AR5312_RESET_BB1_WARM; + } + } + + /* Put BB/MAC into reset */ + regval = ioread32(reg); + iowrite32(regval | val, reg); + regval = ioread32(reg); + udelay(100); /* NB: should be atomic */ + + /* Bring BB/MAC out of reset */ + iowrite32(regval & ~val, reg); + regval = ioread32(reg); + + /* + * Reset configuration register (for hw byte-swap). Note that this + * is only set for big endian. We do the necessary magic in + * AR5K_INIT_CFG. + */ + if ((flags & AR5K_RESET_CTL_PCU) == 0) + ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); + + return 0; +} + +/** + * ath5k_hw_set_power_mode() - Set power mode + * @ah: The &struct ath5k_hw + * @mode: One of enum ath5k_power_mode + * @set_chip: Set to true to write sleep control register + * @sleep_duration: How much time the device is allowed to sleep + * when sleep logic is enabled (in 128 microsecond increments). + * + * This function is used to configure sleep policy and allowed + * sleep modes. For more information check out the sleep control + * register on reg.h and STA_ID1. + * + * Returns 0 on success, -EIO if chip didn't wake up or -EINVAL if an invalid + * mode is requested. + */ +static int +ath5k_hw_set_power_mode(struct ath5k_hw *ah, enum ath5k_power_mode mode, + bool set_chip, u16 sleep_duration) +{ + unsigned int i; + u32 staid, data; + + staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); + + switch (mode) { + case AR5K_PM_AUTO: + staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA; + fallthrough; + case AR5K_PM_NETWORK_SLEEP: + if (set_chip) + ath5k_hw_reg_write(ah, + AR5K_SLEEP_CTL_SLE_ALLOW | + sleep_duration, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_FULL_SLEEP: + if (set_chip) + ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP, + AR5K_SLEEP_CTL); + + staid |= AR5K_STA_ID1_PWR_SV; + break; + + case AR5K_PM_AWAKE: + + staid &= ~AR5K_STA_ID1_PWR_SV; + + if (!set_chip) + goto commit; + + data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); + + /* If card is down we 'll get 0xffff... so we + * need to clean this up before we write the register + */ + if (data & 0xffc00000) + data = 0; + else + /* Preserve sleep duration etc */ + data = data & ~AR5K_SLEEP_CTL_SLE; + + ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, + AR5K_SLEEP_CTL); + usleep_range(15, 20); + + for (i = 200; i > 0; i--) { + /* Check if the chip did wake up */ + if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & + AR5K_PCICFG_SPWR_DN) == 0) + break; + + /* Wait a bit and retry */ + usleep_range(50, 75); + ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE, + AR5K_SLEEP_CTL); + } + + /* Fail if the chip didn't wake up */ + if (i == 0) + return -EIO; + + break; + + default: + return -EINVAL; + } + +commit: + ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); + + return 0; +} + +/** + * ath5k_hw_on_hold() - Put device on hold + * @ah: The &struct ath5k_hw + * + * Put MAC and Baseband on warm reset and keep that state + * (don't clean sleep control register). After this MAC + * and Baseband are disabled and a full reset is needed + * to come back. This way we save as much power as possible + * without putting the card on full sleep. + * + * Returns 0 on success or -EIO on error + */ +int +ath5k_hw_on_hold(struct ath5k_hw *ah) +{ + struct pci_dev *pdev = ah->pdev; + u32 bus_flags; + int ret; + + if (ath5k_get_bus_type(ah) == ATH_AHB) + return 0; + + /* Make sure device is awake */ + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); + return ret; + } + + /* + * Put chipset on warm reset... + * + * Note: putting PCI core on warm reset on PCI-E cards + * results card to hang and always return 0xffff... so + * we ignore that flag for PCI-E cards. On PCI cards + * this flag gets cleared after 64 PCI clocks. + */ + bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; + + if (ah->ah_version == AR5K_AR5210) { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | + AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); + usleep_range(2000, 2500); + } else { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + } + + if (ret) { + ATH5K_ERR(ah, "failed to put device on warm reset\n"); + return -EIO; + } + + /* ...wakeup again!*/ + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah, "failed to put device on hold\n"); + return ret; + } + + return ret; +} + +/** + * ath5k_hw_nic_wakeup() - Force card out of sleep + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Bring up MAC + PHY Chips and program PLL + * NOTE: Channel is NULL for the initial wakeup. + * + * Returns 0 on success, -EIO on hw failure or -EINVAL for false channel infos + */ +int +ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel) +{ + struct pci_dev *pdev = ah->pdev; + u32 turbo, mode, clock, bus_flags; + int ret; + + turbo = 0; + mode = 0; + clock = 0; + + if ((ath5k_get_bus_type(ah) != ATH_AHB) || channel) { + /* Wakeup the device */ + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n"); + return ret; + } + } + + /* + * Put chipset on warm reset... + * + * Note: putting PCI core on warm reset on PCI-E cards + * results card to hang and always return 0xffff... so + * we ignore that flag for PCI-E cards. On PCI cards + * this flag gets cleared after 64 PCI clocks. + */ + bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI; + + if (ah->ah_version == AR5K_AR5210) { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | + AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); + usleep_range(2000, 2500); + } else { + if (ath5k_get_bus_type(ah) == ATH_AHB) + ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND); + else + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + } + + if (ret) { + ATH5K_ERR(ah, "failed to reset the MAC Chip\n"); + return -EIO; + } + + /* ...wakeup again!...*/ + ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0); + if (ret) { + ATH5K_ERR(ah, "failed to resume the MAC Chip\n"); + return ret; + } + + /* ...reset configuration register on Wisoc ... + * ...clear reset control register and pull device out of + * warm reset on others */ + if (ath5k_get_bus_type(ah) == ATH_AHB) + ret = ath5k_hw_wisoc_reset(ah, 0); + else + ret = ath5k_hw_nic_reset(ah, 0); + + if (ret) { + ATH5K_ERR(ah, "failed to warm reset the MAC Chip\n"); + return -EIO; + } + + /* On initialization skip PLL programming since we don't have + * a channel / mode set yet */ + if (!channel) + return 0; + + if (ah->ah_version != AR5K_AR5210) { + /* + * Get channel mode flags + */ + + if (ah->ah_radio >= AR5K_RF5112) { + mode = AR5K_PHY_MODE_RAD_RF5112; + clock = AR5K_PHY_PLL_RF5112; + } else { + mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ + clock = AR5K_PHY_PLL_RF5111; /*Zero*/ + } + + if (channel->band == NL80211_BAND_2GHZ) { + mode |= AR5K_PHY_MODE_FREQ_2GHZ; + clock |= AR5K_PHY_PLL_44MHZ; + + if (channel->hw_value == AR5K_MODE_11B) { + mode |= AR5K_PHY_MODE_MOD_CCK; + } else { + /* XXX Dynamic OFDM/CCK is not supported by the + * AR5211 so we set MOD_OFDM for plain g (no + * CCK headers) operation. We need to test + * this, 5211 might support ofdm-only g after + * all, there are also initial register values + * in the code for g mode (see initvals.c). + */ + if (ah->ah_version == AR5K_AR5211) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else + mode |= AR5K_PHY_MODE_MOD_DYN; + } + } else if (channel->band == NL80211_BAND_5GHZ) { + mode |= (AR5K_PHY_MODE_FREQ_5GHZ | + AR5K_PHY_MODE_MOD_OFDM); + + /* Different PLL setting for 5413 */ + if (ah->ah_radio == AR5K_RF5413) + clock = AR5K_PHY_PLL_40MHZ_5413; + else + clock |= AR5K_PHY_PLL_40MHZ; + } else { + ATH5K_ERR(ah, "invalid radio frequency mode\n"); + return -EINVAL; + } + + /*XXX: Can bwmode be used with dynamic mode ? + * (I don't think it supports 44MHz) */ + /* On 2425 initvals TURBO_SHORT is not present */ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { + turbo = AR5K_PHY_TURBO_MODE; + if (ah->ah_radio != AR5K_RF2425) + turbo |= AR5K_PHY_TURBO_SHORT; + } else if (ah->ah_bwmode != AR5K_BWMODE_DEFAULT) { + if (ah->ah_radio == AR5K_RF5413) { + mode |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ? + AR5K_PHY_MODE_HALF_RATE : + AR5K_PHY_MODE_QUARTER_RATE; + } else if (ah->ah_version == AR5K_AR5212) { + clock |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ? + AR5K_PHY_PLL_HALF_RATE : + AR5K_PHY_PLL_QUARTER_RATE; + } + } + + } else { /* Reset the device */ + + /* ...enable Atheros turbo mode if requested */ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) + ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, + AR5K_PHY_TURBO); + } + + if (ah->ah_version != AR5K_AR5210) { + + /* ...update PLL if needed */ + if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) { + ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); + usleep_range(300, 350); + } + + /* ...set the PHY operating mode */ + ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); + ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); + } + + return 0; +} + + +/**************************************\ +* Post-initvals register modifications * +\**************************************/ + +/** + * ath5k_hw_tweak_initval_settings() - Tweak initial settings + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Some settings are not handled on initvals, e.g. bwmode + * settings, some phy settings, workarounds etc that in general + * don't fit anywhere else or are too small to introduce a separate + * function for each one. So we have this function to handle + * them all during reset and complete card's initialization. + */ +static void +ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + if (ah->ah_version == AR5K_AR5212 && + ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { + + /* Setup ADC control */ + ath5k_hw_reg_write(ah, + (AR5K_REG_SM(2, + AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) | + AR5K_REG_SM(2, + AR5K_PHY_ADC_CTL_INBUFGAIN_ON) | + AR5K_PHY_ADC_CTL_PWD_DAC_OFF | + AR5K_PHY_ADC_CTL_PWD_ADC_OFF), + AR5K_PHY_ADC_CTL); + + + + /* Disable barker RSSI threshold */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL, + AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR); + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL, + AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2); + + /* Set the mute mask */ + ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); + } + + /* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */ + if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B) + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH); + + /* Enable DCU double buffering */ + if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B) + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_DCU_DBL_BUF_DIS); + + /* Set fast ADC */ + if ((ah->ah_radio == AR5K_RF5413) || + (ah->ah_radio == AR5K_RF2317) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { + u32 fast_adc = true; + + if (channel->center_freq == 2462 || + channel->center_freq == 2467) + fast_adc = 0; + + /* Only update if needed */ + if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc) + ath5k_hw_reg_write(ah, fast_adc, + AR5K_PHY_FAST_ADC); + } + + /* Fix for first revision of the RF5112 RF chipset */ + if (ah->ah_radio == AR5K_RF5112 && + ah->ah_radio_5ghz_revision < + AR5K_SREV_RAD_5112A) { + u32 data; + ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, + AR5K_PHY_CCKTXCTL); + if (channel->band == NL80211_BAND_5GHZ) + data = 0xffb81020; + else + data = 0xffb80d20; + ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); + } + + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + /* Clear QCU/DCU clock gating register */ + ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT); + /* Set DAC/ADC delays */ + ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ_5311, + AR5K_PHY_SCAL); + /* Enable PCU FIFO corruption ECO */ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_ECO_ENABLE); + } + + if (ah->ah_bwmode) { + /* Increase PHY switch and AGC settling time + * on turbo mode (ath5k_hw_commit_eeprom_settings + * will override settling time if available) */ + if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) { + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_AGC, + AR5K_AGC_SETTLING_TURBO); + + /* XXX: Initvals indicate we only increase + * switch time on AR5212, 5211 and 5210 + * only change agc time (bug?) */ + if (ah->ah_version == AR5K_AR5212) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_SWITCH, + AR5K_SWITCH_SETTLING_TURBO); + + if (ah->ah_version == AR5K_AR5210) { + /* Set Frame Control Register */ + ath5k_hw_reg_write(ah, + (AR5K_PHY_FRAME_CTL_INI | + AR5K_PHY_TURBO_MODE | + AR5K_PHY_TURBO_SHORT | 0x2020), + AR5K_PHY_FRAME_CTL_5210); + } + /* On 5413 PHY force window length for half/quarter rate*/ + } else if ((ah->ah_mac_srev >= AR5K_SREV_AR5424) && + (ah->ah_mac_srev <= AR5K_SREV_AR5414)) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL_5211, + AR5K_PHY_FRAME_CTL_WIN_LEN, + 3); + } + } else if (ah->ah_version == AR5K_AR5210) { + /* Set Frame Control Register for normal operation */ + ath5k_hw_reg_write(ah, (AR5K_PHY_FRAME_CTL_INI | 0x1020), + AR5K_PHY_FRAME_CTL_5210); + } +} + +/** + * ath5k_hw_commit_eeprom_settings() - Commit settings from EEPROM + * @ah: The &struct ath5k_hw + * @channel: The &struct ieee80211_channel + * + * Use settings stored on EEPROM to properly initialize the card + * based on various infos and per-mode calibration data. + */ +static void +ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + s16 cck_ofdm_pwr_delta; + u8 ee_mode; + + /* TODO: Add support for AR5210 EEPROM */ + if (ah->ah_version == AR5K_AR5210) + return; + + ee_mode = ath5k_eeprom_mode_from_channel(ah, channel); + + /* Adjust power delta for channel 14 */ + if (channel->center_freq == 2484) + cck_ofdm_pwr_delta = + ((ee->ee_cck_ofdm_power_delta - + ee->ee_scaled_cck_delta) * 2) / 10; + else + cck_ofdm_pwr_delta = + (ee->ee_cck_ofdm_power_delta * 2) / 10; + + /* Set CCK to OFDM power delta on tx power + * adjustment register */ + if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { + if (channel->hw_value == AR5K_MODE_11G) + ath5k_hw_reg_write(ah, + AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1), + AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) | + AR5K_REG_SM((cck_ofdm_pwr_delta * -1), + AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX), + AR5K_PHY_TX_PWR_ADJ); + else + ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ); + } else { + /* For older revs we scale power on sw during tx power + * setup */ + ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta; + ah->ah_txpower.txp_cck_ofdm_gainf_delta = + ee->ee_cck_ofdm_gain_delta; + } + + /* XXX: necessary here? is called from ath5k_hw_set_antenna_mode() + * too */ + ath5k_hw_set_antenna_switch(ah, ee_mode); + + /* Noise floor threshold */ + ath5k_hw_reg_write(ah, + AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), + AR5K_PHY_NFTHRES); + + if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) && + (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) { + /* Switch settling time (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_SWITCH, + ee->ee_switch_settling_turbo[ee_mode]); + + /* Tx/Rx attenuation (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN, + AR5K_PHY_GAIN_TXRX_ATTEN, + ee->ee_atn_tx_rx_turbo[ee_mode]); + + /* ADC/PGA desired size (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_ADC, + ee->ee_adc_desired_size_turbo[ee_mode]); + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_PGA, + ee->ee_pga_desired_size_turbo[ee_mode]); + + /* Tx/Rx margin (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, + AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, + ee->ee_margin_tx_rx_turbo[ee_mode]); + + } else { + /* Switch settling time */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_SWITCH, + ee->ee_switch_settling[ee_mode]); + + /* Tx/Rx attenuation */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN, + AR5K_PHY_GAIN_TXRX_ATTEN, + ee->ee_atn_tx_rx[ee_mode]); + + /* ADC/PGA desired size */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_ADC, + ee->ee_adc_desired_size[ee_mode]); + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_PGA, + ee->ee_pga_desired_size[ee_mode]); + + /* Tx/Rx margin */ + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, + AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, + ee->ee_margin_tx_rx[ee_mode]); + } + + /* XPA delays */ + ath5k_hw_reg_write(ah, + (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | + (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | + (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | + (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); + + /* XLNA delay */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3, + AR5K_PHY_RF_CTL3_TXE2XLNA_ON, + ee->ee_tx_end2xlna_enable[ee_mode]); + + /* Thresh64 (ANI) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF, + AR5K_PHY_NF_THRESH62, + ee->ee_thr_62[ee_mode]); + + /* False detect backoff for channels + * that have spur noise. Write the new + * cyclic power RSSI threshold. */ + if (ath5k_hw_chan_has_spur_noise(ah, channel)) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, + AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, + AR5K_INIT_CYCRSSI_THR1 + + ee->ee_false_detect[ee_mode]); + else + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, + AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, + AR5K_INIT_CYCRSSI_THR1); + + /* I/Q correction (set enable bit last to match HAL sources) */ + /* TODO: Per channel i/q infos ? */ + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_I_COFF, + ee->ee_i_cal[ee_mode]); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_Q_Q_COFF, + ee->ee_q_cal[ee_mode]); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE); + } + + /* Heavy clipping -disable for now */ + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1) + ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE); +} + + +/*********************\ +* Main reset function * +\*********************/ + +/** + * ath5k_hw_reset() - The main reset function + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * @channel: The &struct ieee80211_channel + * @fast: Enable fast channel switching + * @skip_pcu: Skip pcu initialization + * + * This is the function we call each time we want to (re)initialize the + * card and pass new settings to hw. We also call it when hw runs into + * trouble to make it come back to a working state. + * + * Returns 0 on success, -EINVAL on false op_mode or channel infos, or -EIO + * on failure. + */ +int +ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, + struct ieee80211_channel *channel, bool fast, bool skip_pcu) +{ + u32 s_seq[10], s_led[3], tsf_up, tsf_lo; + u8 mode; + int i, ret; + + tsf_up = 0; + tsf_lo = 0; + mode = 0; + + /* + * Sanity check for fast flag + * Fast channel change only available + * on AR2413/AR5413. + */ + if (fast && (ah->ah_radio != AR5K_RF2413) && + (ah->ah_radio != AR5K_RF5413)) + fast = false; + + /* Disable sleep clock operation + * to avoid register access delay on certain + * PHY registers */ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_set_sleep_clock(ah, false); + + mode = channel->hw_value; + switch (mode) { + case AR5K_MODE_11A: + break; + case AR5K_MODE_11G: + if (ah->ah_version <= AR5K_AR5211) { + ATH5K_ERR(ah, + "G mode not available on 5210/5211"); + return -EINVAL; + } + break; + case AR5K_MODE_11B: + if (ah->ah_version < AR5K_AR5211) { + ATH5K_ERR(ah, + "B mode not available on 5210"); + return -EINVAL; + } + break; + default: + ATH5K_ERR(ah, + "invalid channel: %d\n", channel->center_freq); + return -EINVAL; + } + + /* + * If driver requested fast channel change and DMA has stopped + * go on. If it fails continue with a normal reset. + */ + if (fast) { + ret = ath5k_hw_phy_init(ah, channel, mode, true); + if (ret) { + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "fast chan change failed, falling back to normal reset\n"); + /* Non fatal, can happen eg. + * on mode change */ + ret = 0; + } else { + ATH5K_DBG(ah, ATH5K_DEBUG_RESET, + "fast chan change successful\n"); + return 0; + } + } + + /* + * Save some registers before a reset + */ + if (ah->ah_version != AR5K_AR5210) { + /* + * Save frame sequence count + * For revs. after Oahu, only save + * seq num for DCU 0 (Global seq num) + */ + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + + for (i = 0; i < 10; i++) + s_seq[i] = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DCU_SEQNUM(i)); + + } else { + s_seq[0] = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DCU_SEQNUM(0)); + } + + /* TSF accelerates on AR5211 during reset + * As a workaround save it here and restore + * it later so that it's back in time after + * reset. This way it'll get re-synced on the + * next beacon without breaking ad-hoc. + * + * On AR5212 TSF is almost preserved across a + * reset so it stays back in time anyway and + * we don't have to save/restore it. + * + * XXX: Since this breaks power saving we have + * to disable power saving until we receive the + * next beacon, so we can resync beacon timers */ + if (ah->ah_version == AR5K_AR5211) { + tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32); + tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32); + } + } + + + /*GPIOs*/ + s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & + AR5K_PCICFG_LEDSTATE; + s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); + s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + + /* + * Since we are going to write rf buffer + * check if we have any pending gain_F + * optimization settings + */ + if (ah->ah_version == AR5K_AR5212 && + (ah->ah_radio <= AR5K_RF5112)) { + if (!fast && ah->ah_rf_banks != NULL) + ath5k_hw_gainf_calibrate(ah); + } + + /* Wakeup the device */ + ret = ath5k_hw_nic_wakeup(ah, channel); + if (ret) + return ret; + + /* PHY access enable */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5211) + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + else + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40, + AR5K_PHY(0)); + + /* Write initial settings */ + ret = ath5k_hw_write_initvals(ah, mode, skip_pcu); + if (ret) + return ret; + + /* Initialize core clock settings */ + ath5k_hw_init_core_clock(ah); + + /* + * Tweak initval settings for revised + * chipsets and add some more config + * bits + */ + ath5k_hw_tweak_initval_settings(ah, channel); + + /* Commit values from EEPROM */ + ath5k_hw_commit_eeprom_settings(ah, channel); + + + /* + * Restore saved values + */ + + /* Seqnum, TSF */ + if (ah->ah_version != AR5K_AR5210) { + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + for (i = 0; i < 10; i++) + ath5k_hw_reg_write(ah, s_seq[i], + AR5K_QUEUE_DCU_SEQNUM(i)); + } else { + ath5k_hw_reg_write(ah, s_seq[0], + AR5K_QUEUE_DCU_SEQNUM(0)); + } + + if (ah->ah_version == AR5K_AR5211) { + ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32); + ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32); + } + } + + /* Ledstate */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); + + /* Gpio settings */ + ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); + ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); + + /* + * Initialize PCU + */ + ath5k_hw_pcu_init(ah, op_mode); + + /* + * Initialize PHY + */ + ret = ath5k_hw_phy_init(ah, channel, mode, false); + if (ret) { + ATH5K_ERR(ah, + "failed to initialize PHY (%i) !\n", ret); + return ret; + } + + /* + * Configure QCUs/DCUs + */ + ret = ath5k_hw_init_queues(ah); + if (ret) + return ret; + + + /* + * Initialize DMA/Interrupts + */ + ath5k_hw_dma_init(ah); + + + /* + * Enable 32KHz clock function for AR5212+ chips + * Set clocks to 32KHz operation and use an + * external 32KHz crystal when sleeping if one + * exists. + * Disabled by default because it is also disabled in + * other drivers and it is known to cause stability + * issues on some devices + */ + if (ah->ah_use_32khz_clock && ah->ah_version == AR5K_AR5212 && + op_mode != NL80211_IFTYPE_AP) + ath5k_hw_set_sleep_clock(ah, true); + + /* + * Disable beacons and reset the TSF + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE); + ath5k_hw_reset_tsf(ah); + return 0; +} |