diff options
Diffstat (limited to 'drivers/net/wireless/ath/wcn36xx/hal.h')
| -rw-r--r-- | drivers/net/wireless/ath/wcn36xx/hal.h | 5047 |
1 files changed, 5047 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h new file mode 100644 index 000000000..d3a9d00e6 --- /dev/null +++ b/drivers/net/wireless/ath/wcn36xx/hal.h @@ -0,0 +1,5047 @@ +/* + * Copyright (c) 2013 Eugene Krasnikov <k.eugene.e@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _HAL_H_ +#define _HAL_H_ + +/*--------------------------------------------------------------------------- + API VERSIONING INFORMATION + + The RIVA API is versioned as MAJOR.MINOR.VERSION.REVISION + The MAJOR is incremented for major product/architecture changes + (and then MINOR/VERSION/REVISION are zeroed) + The MINOR is incremented for minor product/architecture changes + (and then VERSION/REVISION are zeroed) + The VERSION is incremented if a significant API change occurs + (and then REVISION is zeroed) + The REVISION is incremented if an insignificant API change occurs + or if a new API is added + All values are in the range 0..255 (ie they are 8-bit values) + ---------------------------------------------------------------------------*/ +#define WCN36XX_HAL_VER_MAJOR 1 +#define WCN36XX_HAL_VER_MINOR 4 +#define WCN36XX_HAL_VER_VERSION 1 +#define WCN36XX_HAL_VER_REVISION 2 + +/* This is to force compiler to use the maximum of an int ( 4 bytes ) */ +#define WCN36XX_HAL_MAX_ENUM_SIZE 0x7FFFFFFF +#define WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE 0x7FFF + +/* Max no. of transmit categories */ +#define STACFG_MAX_TC 8 + +/* The maximum value of access category */ +#define WCN36XX_HAL_MAX_AC 4 + +#define WCN36XX_HAL_IPV4_ADDR_LEN 4 + +#define WCN36XX_HAL_STA_INVALID_IDX 0xFF +#define WCN36XX_HAL_BSS_INVALID_IDX 0xFF + +/* Default Beacon template size */ +#define BEACON_TEMPLATE_SIZE 0x180 + +/* Minimum PVM size that the FW expects. See comment in smd.c for details. */ +#define TIM_MIN_PVM_SIZE 6 + +/* Param Change Bitmap sent to HAL */ +#define PARAM_BCN_INTERVAL_CHANGED (1 << 0) +#define PARAM_SHORT_PREAMBLE_CHANGED (1 << 1) +#define PARAM_SHORT_SLOT_TIME_CHANGED (1 << 2) +#define PARAM_llACOEXIST_CHANGED (1 << 3) +#define PARAM_llBCOEXIST_CHANGED (1 << 4) +#define PARAM_llGCOEXIST_CHANGED (1 << 5) +#define PARAM_HT20MHZCOEXIST_CHANGED (1<<6) +#define PARAM_NON_GF_DEVICES_PRESENT_CHANGED (1<<7) +#define PARAM_RIFS_MODE_CHANGED (1<<8) +#define PARAM_LSIG_TXOP_FULL_SUPPORT_CHANGED (1<<9) +#define PARAM_OBSS_MODE_CHANGED (1<<10) +#define PARAM_BEACON_UPDATE_MASK \ + (PARAM_BCN_INTERVAL_CHANGED | \ + PARAM_SHORT_PREAMBLE_CHANGED | \ + PARAM_SHORT_SLOT_TIME_CHANGED | \ + PARAM_llACOEXIST_CHANGED | \ + PARAM_llBCOEXIST_CHANGED | \ + PARAM_llGCOEXIST_CHANGED | \ + PARAM_HT20MHZCOEXIST_CHANGED | \ + PARAM_NON_GF_DEVICES_PRESENT_CHANGED | \ + PARAM_RIFS_MODE_CHANGED | \ + PARAM_LSIG_TXOP_FULL_SUPPORT_CHANGED | \ + PARAM_OBSS_MODE_CHANGED) + +/* dump command response Buffer size */ +#define DUMPCMD_RSP_BUFFER 100 + +/* version string max length (including NULL) */ +#define WCN36XX_HAL_VERSION_LENGTH 64 + +/* How many frames until we start a-mpdu TX session */ +#define WCN36XX_AMPDU_START_THRESH 20 + +#define WCN36XX_MAX_SCAN_SSIDS 9 +#define WCN36XX_MAX_SCAN_IE_LEN 500 + +/* message types for messages exchanged between WDI and HAL */ +enum wcn36xx_hal_host_msg_type { + /* Init/De-Init */ + WCN36XX_HAL_START_REQ = 0, + WCN36XX_HAL_START_RSP = 1, + WCN36XX_HAL_STOP_REQ = 2, + WCN36XX_HAL_STOP_RSP = 3, + + /* Scan */ + WCN36XX_HAL_INIT_SCAN_REQ = 4, + WCN36XX_HAL_INIT_SCAN_RSP = 5, + WCN36XX_HAL_START_SCAN_REQ = 6, + WCN36XX_HAL_START_SCAN_RSP = 7, + WCN36XX_HAL_END_SCAN_REQ = 8, + WCN36XX_HAL_END_SCAN_RSP = 9, + WCN36XX_HAL_FINISH_SCAN_REQ = 10, + WCN36XX_HAL_FINISH_SCAN_RSP = 11, + + /* HW STA configuration/deconfiguration */ + WCN36XX_HAL_CONFIG_STA_REQ = 12, + WCN36XX_HAL_CONFIG_STA_RSP = 13, + WCN36XX_HAL_DELETE_STA_REQ = 14, + WCN36XX_HAL_DELETE_STA_RSP = 15, + WCN36XX_HAL_CONFIG_BSS_REQ = 16, + WCN36XX_HAL_CONFIG_BSS_RSP = 17, + WCN36XX_HAL_DELETE_BSS_REQ = 18, + WCN36XX_HAL_DELETE_BSS_RSP = 19, + + /* Infra STA asscoiation */ + WCN36XX_HAL_JOIN_REQ = 20, + WCN36XX_HAL_JOIN_RSP = 21, + WCN36XX_HAL_POST_ASSOC_REQ = 22, + WCN36XX_HAL_POST_ASSOC_RSP = 23, + + /* Security */ + WCN36XX_HAL_SET_BSSKEY_REQ = 24, + WCN36XX_HAL_SET_BSSKEY_RSP = 25, + WCN36XX_HAL_SET_STAKEY_REQ = 26, + WCN36XX_HAL_SET_STAKEY_RSP = 27, + WCN36XX_HAL_RMV_BSSKEY_REQ = 28, + WCN36XX_HAL_RMV_BSSKEY_RSP = 29, + WCN36XX_HAL_RMV_STAKEY_REQ = 30, + WCN36XX_HAL_RMV_STAKEY_RSP = 31, + + /* Qos Related */ + WCN36XX_HAL_ADD_TS_REQ = 32, + WCN36XX_HAL_ADD_TS_RSP = 33, + WCN36XX_HAL_DEL_TS_REQ = 34, + WCN36XX_HAL_DEL_TS_RSP = 35, + WCN36XX_HAL_UPD_EDCA_PARAMS_REQ = 36, + WCN36XX_HAL_UPD_EDCA_PARAMS_RSP = 37, + WCN36XX_HAL_ADD_BA_REQ = 38, + WCN36XX_HAL_ADD_BA_RSP = 39, + WCN36XX_HAL_DEL_BA_REQ = 40, + WCN36XX_HAL_DEL_BA_RSP = 41, + + WCN36XX_HAL_CH_SWITCH_REQ = 42, + WCN36XX_HAL_CH_SWITCH_RSP = 43, + WCN36XX_HAL_SET_LINK_ST_REQ = 44, + WCN36XX_HAL_SET_LINK_ST_RSP = 45, + WCN36XX_HAL_GET_STATS_REQ = 46, + WCN36XX_HAL_GET_STATS_RSP = 47, + WCN36XX_HAL_UPDATE_CFG_REQ = 48, + WCN36XX_HAL_UPDATE_CFG_RSP = 49, + + WCN36XX_HAL_MISSED_BEACON_IND = 50, + WCN36XX_HAL_UNKNOWN_ADDR2_FRAME_RX_IND = 51, + WCN36XX_HAL_MIC_FAILURE_IND = 52, + WCN36XX_HAL_FATAL_ERROR_IND = 53, + WCN36XX_HAL_SET_KEYDONE_MSG = 54, + + /* NV Interface */ + WCN36XX_HAL_DOWNLOAD_NV_REQ = 55, + WCN36XX_HAL_DOWNLOAD_NV_RSP = 56, + + WCN36XX_HAL_ADD_BA_SESSION_REQ = 57, + WCN36XX_HAL_ADD_BA_SESSION_RSP = 58, + WCN36XX_HAL_TRIGGER_BA_REQ = 59, + WCN36XX_HAL_TRIGGER_BA_RSP = 60, + WCN36XX_HAL_UPDATE_BEACON_REQ = 61, + WCN36XX_HAL_UPDATE_BEACON_RSP = 62, + WCN36XX_HAL_SEND_BEACON_REQ = 63, + WCN36XX_HAL_SEND_BEACON_RSP = 64, + + WCN36XX_HAL_SET_BCASTKEY_REQ = 65, + WCN36XX_HAL_SET_BCASTKEY_RSP = 66, + WCN36XX_HAL_DELETE_STA_CONTEXT_IND = 67, + WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_REQ = 68, + WCN36XX_HAL_UPDATE_PROBE_RSP_TEMPLATE_RSP = 69, + + /* PTT interface support */ + WCN36XX_HAL_PROCESS_PTT_REQ = 70, + WCN36XX_HAL_PROCESS_PTT_RSP = 71, + + /* BTAMP related events */ + WCN36XX_HAL_SIGNAL_BTAMP_EVENT_REQ = 72, + WCN36XX_HAL_SIGNAL_BTAMP_EVENT_RSP = 73, + WCN36XX_HAL_TL_HAL_FLUSH_AC_REQ = 74, + WCN36XX_HAL_TL_HAL_FLUSH_AC_RSP = 75, + + WCN36XX_HAL_ENTER_IMPS_REQ = 76, + WCN36XX_HAL_EXIT_IMPS_REQ = 77, + WCN36XX_HAL_ENTER_BMPS_REQ = 78, + WCN36XX_HAL_EXIT_BMPS_REQ = 79, + WCN36XX_HAL_ENTER_UAPSD_REQ = 80, + WCN36XX_HAL_EXIT_UAPSD_REQ = 81, + WCN36XX_HAL_UPDATE_UAPSD_PARAM_REQ = 82, + WCN36XX_HAL_CONFIGURE_RXP_FILTER_REQ = 83, + WCN36XX_HAL_ADD_BCN_FILTER_REQ = 84, + WCN36XX_HAL_REM_BCN_FILTER_REQ = 85, + WCN36XX_HAL_ADD_WOWL_BCAST_PTRN = 86, + WCN36XX_HAL_DEL_WOWL_BCAST_PTRN = 87, + WCN36XX_HAL_ENTER_WOWL_REQ = 88, + WCN36XX_HAL_EXIT_WOWL_REQ = 89, + WCN36XX_HAL_HOST_OFFLOAD_REQ = 90, + WCN36XX_HAL_SET_RSSI_THRESH_REQ = 91, + WCN36XX_HAL_GET_RSSI_REQ = 92, + WCN36XX_HAL_SET_UAPSD_AC_PARAMS_REQ = 93, + WCN36XX_HAL_CONFIGURE_APPS_CPU_WAKEUP_STATE_REQ = 94, + + WCN36XX_HAL_ENTER_IMPS_RSP = 95, + WCN36XX_HAL_EXIT_IMPS_RSP = 96, + WCN36XX_HAL_ENTER_BMPS_RSP = 97, + WCN36XX_HAL_EXIT_BMPS_RSP = 98, + WCN36XX_HAL_ENTER_UAPSD_RSP = 99, + WCN36XX_HAL_EXIT_UAPSD_RSP = 100, + WCN36XX_HAL_SET_UAPSD_AC_PARAMS_RSP = 101, + WCN36XX_HAL_UPDATE_UAPSD_PARAM_RSP = 102, + WCN36XX_HAL_CONFIGURE_RXP_FILTER_RSP = 103, + WCN36XX_HAL_ADD_BCN_FILTER_RSP = 104, + WCN36XX_HAL_REM_BCN_FILTER_RSP = 105, + WCN36XX_HAL_SET_RSSI_THRESH_RSP = 106, + WCN36XX_HAL_HOST_OFFLOAD_RSP = 107, + WCN36XX_HAL_ADD_WOWL_BCAST_PTRN_RSP = 108, + WCN36XX_HAL_DEL_WOWL_BCAST_PTRN_RSP = 109, + WCN36XX_HAL_ENTER_WOWL_RSP = 110, + WCN36XX_HAL_EXIT_WOWL_RSP = 111, + WCN36XX_HAL_RSSI_NOTIFICATION_IND = 112, + WCN36XX_HAL_GET_RSSI_RSP = 113, + WCN36XX_HAL_CONFIGURE_APPS_CPU_WAKEUP_STATE_RSP = 114, + + /* 11k related events */ + WCN36XX_HAL_SET_MAX_TX_POWER_REQ = 115, + WCN36XX_HAL_SET_MAX_TX_POWER_RSP = 116, + + /* 11R related msgs */ + WCN36XX_HAL_AGGR_ADD_TS_REQ = 117, + WCN36XX_HAL_AGGR_ADD_TS_RSP = 118, + + /* P2P WLAN_FEATURE_P2P */ + WCN36XX_HAL_SET_P2P_GONOA_REQ = 119, + WCN36XX_HAL_SET_P2P_GONOA_RSP = 120, + + /* WLAN Dump commands */ + WCN36XX_HAL_DUMP_COMMAND_REQ = 121, + WCN36XX_HAL_DUMP_COMMAND_RSP = 122, + + /* OEM_DATA FEATURE SUPPORT */ + WCN36XX_HAL_START_OEM_DATA_REQ = 123, + WCN36XX_HAL_START_OEM_DATA_RSP = 124, + + /* ADD SELF STA REQ and RSP */ + WCN36XX_HAL_ADD_STA_SELF_REQ = 125, + WCN36XX_HAL_ADD_STA_SELF_RSP = 126, + + /* DEL SELF STA SUPPORT */ + WCN36XX_HAL_DEL_STA_SELF_REQ = 127, + WCN36XX_HAL_DEL_STA_SELF_RSP = 128, + + /* Coex Indication */ + WCN36XX_HAL_COEX_IND = 129, + + /* Tx Complete Indication */ + WCN36XX_HAL_OTA_TX_COMPL_IND = 130, + + /* Host Suspend/resume messages */ + WCN36XX_HAL_HOST_SUSPEND_IND = 131, + WCN36XX_HAL_HOST_RESUME_REQ = 132, + WCN36XX_HAL_HOST_RESUME_RSP = 133, + + WCN36XX_HAL_SET_TX_POWER_REQ = 134, + WCN36XX_HAL_SET_TX_POWER_RSP = 135, + WCN36XX_HAL_GET_TX_POWER_REQ = 136, + WCN36XX_HAL_GET_TX_POWER_RSP = 137, + + WCN36XX_HAL_P2P_NOA_ATTR_IND = 138, + + WCN36XX_HAL_ENABLE_RADAR_DETECT_REQ = 139, + WCN36XX_HAL_ENABLE_RADAR_DETECT_RSP = 140, + WCN36XX_HAL_GET_TPC_REPORT_REQ = 141, + WCN36XX_HAL_GET_TPC_REPORT_RSP = 142, + WCN36XX_HAL_RADAR_DETECT_IND = 143, + WCN36XX_HAL_RADAR_DETECT_INTR_IND = 144, + WCN36XX_HAL_KEEP_ALIVE_REQ = 145, + WCN36XX_HAL_KEEP_ALIVE_RSP = 146, + + /* PNO messages */ + WCN36XX_HAL_SET_PREF_NETWORK_REQ = 147, + WCN36XX_HAL_SET_PREF_NETWORK_RSP = 148, + WCN36XX_HAL_SET_RSSI_FILTER_REQ = 149, + WCN36XX_HAL_SET_RSSI_FILTER_RSP = 150, + WCN36XX_HAL_UPDATE_SCAN_PARAM_REQ = 151, + WCN36XX_HAL_UPDATE_SCAN_PARAM_RSP = 152, + WCN36XX_HAL_PREF_NETW_FOUND_IND = 153, + + WCN36XX_HAL_SET_TX_PER_TRACKING_REQ = 154, + WCN36XX_HAL_SET_TX_PER_TRACKING_RSP = 155, + WCN36XX_HAL_TX_PER_HIT_IND = 156, + + WCN36XX_HAL_8023_MULTICAST_LIST_REQ = 157, + WCN36XX_HAL_8023_MULTICAST_LIST_RSP = 158, + + WCN36XX_HAL_SET_PACKET_FILTER_REQ = 159, + WCN36XX_HAL_SET_PACKET_FILTER_RSP = 160, + WCN36XX_HAL_PACKET_FILTER_MATCH_COUNT_REQ = 161, + WCN36XX_HAL_PACKET_FILTER_MATCH_COUNT_RSP = 162, + WCN36XX_HAL_CLEAR_PACKET_FILTER_REQ = 163, + WCN36XX_HAL_CLEAR_PACKET_FILTER_RSP = 164, + + /* + * This is temp fix. Should be removed once Host and Riva code is + * in sync. + */ + WCN36XX_HAL_INIT_SCAN_CON_REQ = 165, + + WCN36XX_HAL_SET_POWER_PARAMS_REQ = 166, + WCN36XX_HAL_SET_POWER_PARAMS_RSP = 167, + + WCN36XX_HAL_TSM_STATS_REQ = 168, + WCN36XX_HAL_TSM_STATS_RSP = 169, + + /* wake reason indication (WOW) */ + WCN36XX_HAL_WAKE_REASON_IND = 170, + + /* GTK offload support */ + WCN36XX_HAL_GTK_OFFLOAD_REQ = 171, + WCN36XX_HAL_GTK_OFFLOAD_RSP = 172, + WCN36XX_HAL_GTK_OFFLOAD_GETINFO_REQ = 173, + WCN36XX_HAL_GTK_OFFLOAD_GETINFO_RSP = 174, + + WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_REQ = 175, + WCN36XX_HAL_FEATURE_CAPS_EXCHANGE_RSP = 176, + WCN36XX_HAL_EXCLUDE_UNENCRYPTED_IND = 177, + + WCN36XX_HAL_SET_THERMAL_MITIGATION_REQ = 178, + WCN36XX_HAL_SET_THERMAL_MITIGATION_RSP = 179, + + WCN36XX_HAL_UPDATE_VHT_OP_MODE_REQ = 182, + WCN36XX_HAL_UPDATE_VHT_OP_MODE_RSP = 183, + + WCN36XX_HAL_P2P_NOA_START_IND = 184, + + WCN36XX_HAL_GET_ROAM_RSSI_REQ = 185, + WCN36XX_HAL_GET_ROAM_RSSI_RSP = 186, + + WCN36XX_HAL_CLASS_B_STATS_IND = 187, + WCN36XX_HAL_DEL_BA_IND = 188, + WCN36XX_HAL_DHCP_START_IND = 189, + WCN36XX_HAL_DHCP_STOP_IND = 190, + + /* Scan Offload(hw) APIs */ + WCN36XX_HAL_START_SCAN_OFFLOAD_REQ = 204, + WCN36XX_HAL_START_SCAN_OFFLOAD_RSP = 205, + WCN36XX_HAL_STOP_SCAN_OFFLOAD_REQ = 206, + WCN36XX_HAL_STOP_SCAN_OFFLOAD_RSP = 207, + WCN36XX_HAL_UPDATE_CHANNEL_LIST_REQ = 208, + WCN36XX_HAL_UPDATE_CHANNEL_LIST_RSP = 209, + WCN36XX_HAL_SCAN_OFFLOAD_IND = 210, + + WCN36XX_HAL_AVOID_FREQ_RANGE_IND = 233, + + WCN36XX_HAL_PRINT_REG_INFO_IND = 259, + + WCN36XX_HAL_MSG_MAX = WCN36XX_HAL_MSG_TYPE_MAX_ENUM_SIZE +}; + +/* Enumeration for Version */ +enum wcn36xx_hal_host_msg_version { + WCN36XX_HAL_MSG_VERSION0 = 0, + WCN36XX_HAL_MSG_VERSION1 = 1, + /* define as 2 bytes data */ + WCN36XX_HAL_MSG_WCNSS_CTRL_VERSION = 0x7FFF, + WCN36XX_HAL_MSG_VERSION_MAX_FIELD = WCN36XX_HAL_MSG_WCNSS_CTRL_VERSION +}; + +enum driver_type { + DRIVER_TYPE_PRODUCTION = 0, + DRIVER_TYPE_MFG = 1, + DRIVER_TYPE_DVT = 2, + DRIVER_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_stop_type { + HAL_STOP_TYPE_SYS_RESET, + HAL_STOP_TYPE_SYS_DEEP_SLEEP, + HAL_STOP_TYPE_RF_KILL, + HAL_STOP_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_sys_mode { + HAL_SYS_MODE_NORMAL, + HAL_SYS_MODE_LEARN, + HAL_SYS_MODE_SCAN, + HAL_SYS_MODE_PROMISC, + HAL_SYS_MODE_SUSPEND_LINK, + HAL_SYS_MODE_ROAM_SCAN, + HAL_SYS_MODE_ROAM_SUSPEND_LINK, + HAL_SYS_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum phy_chan_bond_state { + /* 20MHz IF bandwidth centered on IF carrier */ + PHY_SINGLE_CHANNEL_CENTERED = 0, + + /* 40MHz IF bandwidth with lower 20MHz supporting the primary channel */ + PHY_DOUBLE_CHANNEL_LOW_PRIMARY = 1, + + /* 40MHz IF bandwidth centered on IF carrier */ + PHY_DOUBLE_CHANNEL_CENTERED = 2, + + /* 40MHz IF bandwidth with higher 20MHz supporting the primary ch */ + PHY_DOUBLE_CHANNEL_HIGH_PRIMARY = 3, + + /* 20/40MHZ offset LOW 40/80MHZ offset CENTERED */ + PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_CENTERED = 4, + + /* 20/40MHZ offset CENTERED 40/80MHZ offset CENTERED */ + PHY_QUADRUPLE_CHANNEL_20MHZ_CENTERED_40MHZ_CENTERED = 5, + + /* 20/40MHZ offset HIGH 40/80MHZ offset CENTERED */ + PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_CENTERED = 6, + + /* 20/40MHZ offset LOW 40/80MHZ offset LOW */ + PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_LOW = 7, + + /* 20/40MHZ offset HIGH 40/80MHZ offset LOW */ + PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_LOW = 8, + + /* 20/40MHZ offset LOW 40/80MHZ offset HIGH */ + PHY_QUADRUPLE_CHANNEL_20MHZ_LOW_40MHZ_HIGH = 9, + + /* 20/40MHZ offset-HIGH 40/80MHZ offset HIGH */ + PHY_QUADRUPLE_CHANNEL_20MHZ_HIGH_40MHZ_HIGH = 10, + + PHY_CHANNEL_BONDING_STATE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* Spatial Multiplexing(SM) Power Save mode */ +enum wcn36xx_hal_ht_mimo_state { + /* Static SM Power Save mode */ + WCN36XX_HAL_HT_MIMO_PS_STATIC = 0, + + /* Dynamic SM Power Save mode */ + WCN36XX_HAL_HT_MIMO_PS_DYNAMIC = 1, + + /* reserved */ + WCN36XX_HAL_HT_MIMO_PS_NA = 2, + + /* SM Power Save disabled */ + WCN36XX_HAL_HT_MIMO_PS_NO_LIMIT = 3, + + WCN36XX_HAL_HT_MIMO_PS_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* each station added has a rate mode which specifies the sta attributes */ +enum sta_rate_mode { + STA_TAURUS = 0, + STA_TITAN, + STA_POLARIS, + STA_11b, + STA_11bg, + STA_11a, + STA_11n, + STA_11ac, + STA_INVALID_RATE_MODE = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* 1,2,5.5,11 */ +#define WCN36XX_HAL_NUM_DSSS_RATES 4 + +/* 6,9,12,18,24,36,48,54 */ +#define WCN36XX_HAL_NUM_OFDM_RATES 8 + +/* 72,96,108 */ +#define WCN36XX_HAL_NUM_POLARIS_RATES 3 + +#define WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET 16 + +enum wcn36xx_hal_bss_type { + WCN36XX_HAL_INFRASTRUCTURE_MODE, + + /* Added for softAP support */ + WCN36XX_HAL_INFRA_AP_MODE, + + WCN36XX_HAL_IBSS_MODE, + + /* Added for BT-AMP support */ + WCN36XX_HAL_BTAMP_STA_MODE, + + /* Added for BT-AMP support */ + WCN36XX_HAL_BTAMP_AP_MODE, + + WCN36XX_HAL_AUTO_MODE, + + WCN36XX_HAL_DONOT_USE_BSS_TYPE = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_nw_type { + WCN36XX_HAL_11A_NW_TYPE, + WCN36XX_HAL_11B_NW_TYPE, + WCN36XX_HAL_11G_NW_TYPE, + WCN36XX_HAL_11N_NW_TYPE, + WCN36XX_HAL_DONOT_USE_NW_TYPE = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +#define WCN36XX_HAL_MAC_RATESET_EID_MAX 12 + +enum wcn36xx_hal_ht_operating_mode { + /* No Protection */ + WCN36XX_HAL_HT_OP_MODE_PURE, + + /* Overlap Legacy device present, protection is optional */ + WCN36XX_HAL_HT_OP_MODE_OVERLAP_LEGACY, + + /* No legacy device, but 20 MHz HT present */ + WCN36XX_HAL_HT_OP_MODE_NO_LEGACY_20MHZ_HT, + + /* Protection is required */ + WCN36XX_HAL_HT_OP_MODE_MIXED, + + WCN36XX_HAL_HT_OP_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* Encryption type enum used with peer */ +enum ani_ed_type { + WCN36XX_HAL_ED_NONE, + WCN36XX_HAL_ED_WEP40, + WCN36XX_HAL_ED_WEP104, + WCN36XX_HAL_ED_TKIP, + WCN36XX_HAL_ED_CCMP, + WCN36XX_HAL_ED_WPI, + WCN36XX_HAL_ED_AES_128_CMAC, + WCN36XX_HAL_ED_NOT_IMPLEMENTED = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +#define WLAN_MAX_KEY_RSC_LEN 16 +#define WLAN_WAPI_KEY_RSC_LEN 16 + +/* MAX key length when ULA is used */ +#define WCN36XX_HAL_MAC_MAX_KEY_LENGTH 32 +#define WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS 4 + +/* + * Enum to specify whether key is used for TX only, RX only or both. + */ +enum ani_key_direction { + WCN36XX_HAL_TX_ONLY, + WCN36XX_HAL_RX_ONLY, + WCN36XX_HAL_TX_RX, + WCN36XX_HAL_TX_DEFAULT, + WCN36XX_HAL_DONOT_USE_KEY_DIRECTION = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum ani_wep_type { + WCN36XX_HAL_WEP_STATIC, + WCN36XX_HAL_WEP_DYNAMIC, + WCN36XX_HAL_WEP_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_link_state { + + WCN36XX_HAL_LINK_IDLE_STATE = 0, + WCN36XX_HAL_LINK_PREASSOC_STATE = 1, + WCN36XX_HAL_LINK_POSTASSOC_STATE = 2, + WCN36XX_HAL_LINK_AP_STATE = 3, + WCN36XX_HAL_LINK_IBSS_STATE = 4, + + /* BT-AMP Case */ + WCN36XX_HAL_LINK_BTAMP_PREASSOC_STATE = 5, + WCN36XX_HAL_LINK_BTAMP_POSTASSOC_STATE = 6, + WCN36XX_HAL_LINK_BTAMP_AP_STATE = 7, + WCN36XX_HAL_LINK_BTAMP_STA_STATE = 8, + + /* Reserved for HAL Internal Use */ + WCN36XX_HAL_LINK_LEARN_STATE = 9, + WCN36XX_HAL_LINK_SCAN_STATE = 10, + WCN36XX_HAL_LINK_FINISH_SCAN_STATE = 11, + WCN36XX_HAL_LINK_INIT_CAL_STATE = 12, + WCN36XX_HAL_LINK_FINISH_CAL_STATE = 13, + WCN36XX_HAL_LINK_LISTEN_STATE = 14, + + WCN36XX_HAL_LINK_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_stats_mask { + HAL_SUMMARY_STATS_INFO = 0x00000001, + HAL_GLOBAL_CLASS_A_STATS_INFO = 0x00000002, + HAL_GLOBAL_CLASS_B_STATS_INFO = 0x00000004, + HAL_GLOBAL_CLASS_C_STATS_INFO = 0x00000008, + HAL_GLOBAL_CLASS_D_STATS_INFO = 0x00000010, + HAL_PER_STA_STATS_INFO = 0x00000020 +}; + +/* BT-AMP events type */ +enum bt_amp_event_type { + BTAMP_EVENT_CONNECTION_START, + BTAMP_EVENT_CONNECTION_STOP, + BTAMP_EVENT_CONNECTION_TERMINATED, + + /* This and beyond are invalid values */ + BTAMP_EVENT_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE, +}; + +/* PE Statistics */ +enum pe_stats_mask { + PE_SUMMARY_STATS_INFO = 0x00000001, + PE_GLOBAL_CLASS_A_STATS_INFO = 0x00000002, + PE_GLOBAL_CLASS_B_STATS_INFO = 0x00000004, + PE_GLOBAL_CLASS_C_STATS_INFO = 0x00000008, + PE_GLOBAL_CLASS_D_STATS_INFO = 0x00000010, + PE_PER_STA_STATS_INFO = 0x00000020, + + /* This and beyond are invalid values */ + PE_STATS_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* + * Configuration Parameter IDs + */ +#define WCN36XX_HAL_CFG_STA_ID 0 +#define WCN36XX_HAL_CFG_CURRENT_TX_ANTENNA 1 +#define WCN36XX_HAL_CFG_CURRENT_RX_ANTENNA 2 +#define WCN36XX_HAL_CFG_LOW_GAIN_OVERRIDE 3 +#define WCN36XX_HAL_CFG_POWER_STATE_PER_CHAIN 4 +#define WCN36XX_HAL_CFG_CAL_PERIOD 5 +#define WCN36XX_HAL_CFG_CAL_CONTROL 6 +#define WCN36XX_HAL_CFG_PROXIMITY 7 +#define WCN36XX_HAL_CFG_NETWORK_DENSITY 8 +#define WCN36XX_HAL_CFG_MAX_MEDIUM_TIME 9 +#define WCN36XX_HAL_CFG_MAX_MPDUS_IN_AMPDU 10 +#define WCN36XX_HAL_CFG_RTS_THRESHOLD 11 +#define WCN36XX_HAL_CFG_SHORT_RETRY_LIMIT 12 +#define WCN36XX_HAL_CFG_LONG_RETRY_LIMIT 13 +#define WCN36XX_HAL_CFG_FRAGMENTATION_THRESHOLD 14 +#define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_ZERO 15 +#define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_ONE 16 +#define WCN36XX_HAL_CFG_DYNAMIC_THRESHOLD_TWO 17 +#define WCN36XX_HAL_CFG_FIXED_RATE 18 +#define WCN36XX_HAL_CFG_RETRYRATE_POLICY 19 +#define WCN36XX_HAL_CFG_RETRYRATE_SECONDARY 20 +#define WCN36XX_HAL_CFG_RETRYRATE_TERTIARY 21 +#define WCN36XX_HAL_CFG_FORCE_POLICY_PROTECTION 22 +#define WCN36XX_HAL_CFG_FIXED_RATE_MULTICAST_24GHZ 23 +#define WCN36XX_HAL_CFG_FIXED_RATE_MULTICAST_5GHZ 24 +#define WCN36XX_HAL_CFG_DEFAULT_RATE_INDEX_24GHZ 25 +#define WCN36XX_HAL_CFG_DEFAULT_RATE_INDEX_5GHZ 26 +#define WCN36XX_HAL_CFG_MAX_BA_SESSIONS 27 +#define WCN36XX_HAL_CFG_PS_DATA_INACTIVITY_TIMEOUT 28 +#define WCN36XX_HAL_CFG_PS_ENABLE_BCN_FILTER 29 +#define WCN36XX_HAL_CFG_PS_ENABLE_RSSI_MONITOR 30 +#define WCN36XX_HAL_CFG_NUM_BEACON_PER_RSSI_AVERAGE 31 +#define WCN36XX_HAL_CFG_STATS_PERIOD 32 +#define WCN36XX_HAL_CFG_CFP_MAX_DURATION 33 +#define WCN36XX_HAL_CFG_FRAME_TRANS_ENABLED 34 +#define WCN36XX_HAL_CFG_DTIM_PERIOD 35 +#define WCN36XX_HAL_CFG_EDCA_WMM_ACBK 36 +#define WCN36XX_HAL_CFG_EDCA_WMM_ACBE 37 +#define WCN36XX_HAL_CFG_EDCA_WMM_ACVO 38 +#define WCN36XX_HAL_CFG_EDCA_WMM_ACVI 39 +#define WCN36XX_HAL_CFG_BA_THRESHOLD_HIGH 40 +#define WCN36XX_HAL_CFG_MAX_BA_BUFFERS 41 +#define WCN36XX_HAL_CFG_RPE_POLLING_THRESHOLD 42 +#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC0_REG 43 +#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC1_REG 44 +#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC2_REG 45 +#define WCN36XX_HAL_CFG_RPE_AGING_THRESHOLD_FOR_AC3_REG 46 +#define WCN36XX_HAL_CFG_NO_OF_ONCHIP_REORDER_SESSIONS 47 +#define WCN36XX_HAL_CFG_PS_LISTEN_INTERVAL 48 +#define WCN36XX_HAL_CFG_PS_HEART_BEAT_THRESHOLD 49 +#define WCN36XX_HAL_CFG_PS_NTH_BEACON_FILTER 50 +#define WCN36XX_HAL_CFG_PS_MAX_PS_POLL 51 +#define WCN36XX_HAL_CFG_PS_MIN_RSSI_THRESHOLD 52 +#define WCN36XX_HAL_CFG_PS_RSSI_FILTER_PERIOD 53 +#define WCN36XX_HAL_CFG_PS_BROADCAST_FRAME_FILTER_ENABLE 54 +#define WCN36XX_HAL_CFG_PS_IGNORE_DTIM 55 +#define WCN36XX_HAL_CFG_PS_ENABLE_BCN_EARLY_TERM 56 +#define WCN36XX_HAL_CFG_DYNAMIC_PS_POLL_VALUE 57 +#define WCN36XX_HAL_CFG_PS_NULLDATA_AP_RESP_TIMEOUT 58 +#define WCN36XX_HAL_CFG_TELE_BCN_WAKEUP_EN 59 +#define WCN36XX_HAL_CFG_TELE_BCN_TRANS_LI 60 +#define WCN36XX_HAL_CFG_TELE_BCN_TRANS_LI_IDLE_BCNS 61 +#define WCN36XX_HAL_CFG_TELE_BCN_MAX_LI 62 +#define WCN36XX_HAL_CFG_TELE_BCN_MAX_LI_IDLE_BCNS 63 +#define WCN36XX_HAL_CFG_TX_PWR_CTRL_ENABLE 64 +#define WCN36XX_HAL_CFG_VALID_RADAR_CHANNEL_LIST 65 +#define WCN36XX_HAL_CFG_TX_POWER_24_20 66 +#define WCN36XX_HAL_CFG_TX_POWER_24_40 67 +#define WCN36XX_HAL_CFG_TX_POWER_50_20 68 +#define WCN36XX_HAL_CFG_TX_POWER_50_40 69 +#define WCN36XX_HAL_CFG_MCAST_BCAST_FILTER_SETTING 70 +#define WCN36XX_HAL_CFG_BCN_EARLY_TERM_WAKEUP_INTERVAL 71 +#define WCN36XX_HAL_CFG_MAX_TX_POWER_2_4 72 +#define WCN36XX_HAL_CFG_MAX_TX_POWER_5 73 +#define WCN36XX_HAL_CFG_INFRA_STA_KEEP_ALIVE_PERIOD 74 +#define WCN36XX_HAL_CFG_ENABLE_CLOSE_LOOP 75 +#define WCN36XX_HAL_CFG_BTC_EXECUTION_MODE 76 +#define WCN36XX_HAL_CFG_BTC_DHCP_BT_SLOTS_TO_BLOCK 77 +#define WCN36XX_HAL_CFG_BTC_A2DP_DHCP_BT_SUB_INTERVALS 78 +#define WCN36XX_HAL_CFG_PS_TX_INACTIVITY_TIMEOUT 79 +#define WCN36XX_HAL_CFG_WCNSS_API_VERSION 80 +#define WCN36XX_HAL_CFG_AP_KEEPALIVE_TIMEOUT 81 +#define WCN36XX_HAL_CFG_GO_KEEPALIVE_TIMEOUT 82 +#define WCN36XX_HAL_CFG_ENABLE_MC_ADDR_LIST 83 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_INQ_BT 84 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_PAGE_BT 85 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_CONN_BT 86 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_LE_BT 87 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_INQ_WLAN 88 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_PAGE_WLAN 89 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_CONN_WLAN 90 +#define WCN36XX_HAL_CFG_BTC_STATIC_LEN_LE_WLAN 91 +#define WCN36XX_HAL_CFG_BTC_DYN_MAX_LEN_BT 92 +#define WCN36XX_HAL_CFG_BTC_DYN_MAX_LEN_WLAN 93 +#define WCN36XX_HAL_CFG_BTC_MAX_SCO_BLOCK_PERC 94 +#define WCN36XX_HAL_CFG_BTC_DHCP_PROT_ON_A2DP 95 +#define WCN36XX_HAL_CFG_BTC_DHCP_PROT_ON_SCO 96 +#define WCN36XX_HAL_CFG_ENABLE_UNICAST_FILTER 97 +#define WCN36XX_HAL_CFG_MAX_ASSOC_LIMIT 98 +#define WCN36XX_HAL_CFG_ENABLE_LPWR_IMG_TRANSITION 99 +#define WCN36XX_HAL_CFG_ENABLE_MCC_ADAPTIVE_SCHEDULER 100 +#define WCN36XX_HAL_CFG_ENABLE_DETECT_PS_SUPPORT 101 +#define WCN36XX_HAL_CFG_AP_LINK_MONITOR_TIMEOUT 102 +#define WCN36XX_HAL_CFG_BTC_DWELL_TIME_MULTIPLIER 103 +#define WCN36XX_HAL_CFG_ENABLE_TDLS_OXYGEN_MODE 104 +#define WCN36XX_HAL_CFG_ENABLE_NAT_KEEP_ALIVE_FILTER 105 +#define WCN36XX_HAL_CFG_ENABLE_SAP_OBSS_PROT 106 +#define WCN36XX_HAL_CFG_PSPOLL_DATA_RECEP_TIMEOUT 107 +#define WCN36XX_HAL_CFG_TDLS_PUAPSD_BUFFER_STA_CAPABLE 108 +#define WCN36XX_HAL_CFG_TDLS_PUAPSD_MASK 109 +#define WCN36XX_HAL_CFG_TDLS_PUAPSD_INACTIVITY_TIME 110 +#define WCN36XX_HAL_CFG_TDLS_PUAPSD_RX_FRAME_THRESHOLD 111 +#define WCN36XX_HAL_CFG_ANTENNA_DIVERSITY 112 +#define WCN36XX_HAL_CFG_ATH_DISABLE 113 +#define WCN36XX_HAL_CFG_FLEXCONNECT_POWER_FACTOR 114 +#define WCN36XX_HAL_CFG_ENABLE_ADAPTIVE_RX_DRAIN 115 +#define WCN36XX_HAL_CFG_TDLS_OFF_CHANNEL_CAPABLE 116 +#define WCN36XX_HAL_CFG_MWS_COEX_V1_WAN_FREQ 117 +#define WCN36XX_HAL_CFG_MWS_COEX_V1_WLAN_FREQ 118 +#define WCN36XX_HAL_CFG_MWS_COEX_V1_CONFIG 119 +#define WCN36XX_HAL_CFG_MWS_COEX_V1_CONFIG2 120 +#define WCN36XX_HAL_CFG_MWS_COEX_V2_WAN_FREQ 121 +#define WCN36XX_HAL_CFG_MWS_COEX_V2_WLAN_FREQ 122 +#define WCN36XX_HAL_CFG_MWS_COEX_V2_CONFIG 123 +#define WCN36XX_HAL_CFG_MWS_COEX_V2_CONFIG2 124 +#define WCN36XX_HAL_CFG_MWS_COEX_V3_WAN_FREQ 125 +#define WCN36XX_HAL_CFG_MWS_COEX_V3_WLAN_FREQ 126 +#define WCN36XX_HAL_CFG_MWS_COEX_V3_CONFIG 127 +#define WCN36XX_HAL_CFG_MWS_COEX_V3_CONFIG2 128 +#define WCN36XX_HAL_CFG_MWS_COEX_V4_WAN_FREQ 129 +#define WCN36XX_HAL_CFG_MWS_COEX_V4_WLAN_FREQ 130 +#define WCN36XX_HAL_CFG_MWS_COEX_V4_CONFIG 131 +#define WCN36XX_HAL_CFG_MWS_COEX_V4_CONFIG2 132 +#define WCN36XX_HAL_CFG_MWS_COEX_V5_WAN_FREQ 133 +#define WCN36XX_HAL_CFG_MWS_COEX_V5_WLAN_FREQ 134 +#define WCN36XX_HAL_CFG_MWS_COEX_V5_CONFIG 135 +#define WCN36XX_HAL_CFG_MWS_COEX_V5_CONFIG2 136 +#define WCN36XX_HAL_CFG_MWS_COEX_V6_WAN_FREQ 137 +#define WCN36XX_HAL_CFG_MWS_COEX_V6_WLAN_FREQ 138 +#define WCN36XX_HAL_CFG_MWS_COEX_V6_CONFIG 139 +#define WCN36XX_HAL_CFG_MWS_COEX_V6_CONFIG2 140 +#define WCN36XX_HAL_CFG_MWS_COEX_V7_WAN_FREQ 141 +#define WCN36XX_HAL_CFG_MWS_COEX_V7_WLAN_FREQ 142 +#define WCN36XX_HAL_CFG_MWS_COEX_V7_CONFIG 143 +#define WCN36XX_HAL_CFG_MWS_COEX_V7_CONFIG2 144 +#define WCN36XX_HAL_CFG_MWS_COEX_V8_WAN_FREQ 145 +#define WCN36XX_HAL_CFG_MWS_COEX_V8_WLAN_FREQ 146 +#define WCN36XX_HAL_CFG_MWS_COEX_V8_CONFIG 147 +#define WCN36XX_HAL_CFG_MWS_COEX_V8_CONFIG2 148 +#define WCN36XX_HAL_CFG_MWS_COEX_V9_WAN_FREQ 149 +#define WCN36XX_HAL_CFG_MWS_COEX_V9_WLAN_FREQ 150 +#define WCN36XX_HAL_CFG_MWS_COEX_V9_CONFIG 151 +#define WCN36XX_HAL_CFG_MWS_COEX_V9_CONFIG2 152 +#define WCN36XX_HAL_CFG_MWS_COEX_V10_WAN_FREQ 153 +#define WCN36XX_HAL_CFG_MWS_COEX_V10_WLAN_FREQ 154 +#define WCN36XX_HAL_CFG_MWS_COEX_V10_CONFIG 155 +#define WCN36XX_HAL_CFG_MWS_COEX_V10_CONFIG2 156 +#define WCN36XX_HAL_CFG_MWS_COEX_MODEM_BACKOFF 157 +#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG1 158 +#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG2 159 +#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG3 160 +#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG4 161 +#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG5 162 +#define WCN36XX_HAL_CFG_MWS_COEX_CONFIG6 163 +#define WCN36XX_HAL_CFG_SAR_POWER_BACKOFF 164 +#define WCN36XX_HAL_CFG_GO_LINK_MONITOR_TIMEOUT 165 +#define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_ACTIVE_WLAN_LEN 166 +#define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_ACTIVE_BT_LEN 167 +#define WCN36XX_HAL_CFG_BTC_SAP_STATIC_OPP_ACTIVE_WLAN_LEN 168 +#define WCN36XX_HAL_CFG_BTC_SAP_STATIC_OPP_ACTIVE_BT_LEN 169 +#define WCN36XX_HAL_CFG_RMC_FIXED_RATE 170 +#define WCN36XX_HAL_CFG_ASD_PROBE_INTERVAL 171 +#define WCN36XX_HAL_CFG_ASD_TRIGGER_THRESHOLD 172 +#define WCN36XX_HAL_CFG_ASD_RTT_RSSI_HYST_THRESHOLD 173 +#define WCN36XX_HAL_CFG_BTC_CTS2S_ON_STA_DURING_SCO 174 +#define WCN36XX_HAL_CFG_SHORT_PREAMBLE 175 +#define WCN36XX_HAL_CFG_SHORT_SLOT_TIME 176 +#define WCN36XX_HAL_CFG_DELAYED_BA 177 +#define WCN36XX_HAL_CFG_IMMEDIATE_BA 178 +#define WCN36XX_HAL_CFG_DOT11_MODE 179 +#define WCN36XX_HAL_CFG_HT_CAPS 180 +#define WCN36XX_HAL_CFG_AMPDU_PARAMS 181 +#define WCN36XX_HAL_CFG_TX_BF_INFO 182 +#define WCN36XX_HAL_CFG_ASC_CAP_INFO 183 +#define WCN36XX_HAL_CFG_EXT_HT_CAPS 184 +#define WCN36XX_HAL_CFG_QOS_ENABLED 185 +#define WCN36XX_HAL_CFG_WME_ENABLED 186 +#define WCN36XX_HAL_CFG_WSM_ENABLED 187 +#define WCN36XX_HAL_CFG_WMM_ENABLED 188 +#define WCN36XX_HAL_CFG_UAPSD_PER_AC_BITMASK 189 +#define WCN36XX_HAL_CFG_MCS_RATES 190 +#define WCN36XX_HAL_CFG_VHT_CAPS 191 +#define WCN36XX_HAL_CFG_VHT_RX_SUPP_MCS 192 +#define WCN36XX_HAL_CFG_VHT_TX_SUPP_MCS 193 +#define WCN36XX_HAL_CFG_RA_FILTER_ENABLE 194 +#define WCN36XX_HAL_CFG_RA_RATE_LIMIT_INTERVAL 195 +#define WCN36XX_HAL_CFG_BTC_FATAL_HID_NSNIFF_BLK 196 +#define WCN36XX_HAL_CFG_BTC_CRITICAL_HID_NSNIFF_BLK 197 +#define WCN36XX_HAL_CFG_BTC_DYN_A2DP_TX_QUEUE_THOLD 198 +#define WCN36XX_HAL_CFG_BTC_DYN_OPP_TX_QUEUE_THOLD 199 +#define WCN36XX_HAL_CFG_LINK_FAIL_TIMEOUT 200 +#define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_SP 201 +#define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_RX_CNT 202 +#define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_TX_CNT 203 +#define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_RX_CNT_MEAS_WINDOW 204 +#define WCN36XX_HAL_CFG_MAX_UAPSD_CONSEC_TX_CNT_MEAS_WINDOW 205 +#define WCN36XX_HAL_CFG_MAX_PSPOLL_IN_WMM_UAPSD_PS_MODE 206 +#define WCN36XX_HAL_CFG_MAX_UAPSD_INACTIVITY_INTERVALS 207 +#define WCN36XX_HAL_CFG_ENABLE_DYNAMIC_WMMPS 208 +#define WCN36XX_HAL_CFG_BURST_MODE_BE_TXOP_VALUE 209 +#define WCN36XX_HAL_CFG_ENABLE_DYNAMIC_RA_START_RATE 210 +#define WCN36XX_HAL_CFG_BTC_FAST_WLAN_CONN_PREF 211 +#define WCN36XX_HAL_CFG_ENABLE_RTSCTS_HTVHT 212 +#define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_IDLE_WLAN_LEN 213 +#define WCN36XX_HAL_CFG_BTC_STATIC_OPP_WLAN_IDLE_BT_LEN 214 +#define WCN36XX_HAL_CFG_LINK_FAIL_TX_CNT 215 +#define WCN36XX_HAL_CFG_TOGGLE_ARP_BDRATES 216 +#define WCN36XX_HAL_CFG_OPTIMIZE_CA_EVENT 217 +#define WCN36XX_HAL_CFG_EXT_SCAN_CONC_MODE 218 +#define WCN36XX_HAL_CFG_BAR_WAKEUP_HOST_DISABLE 219 +#define WCN36XX_HAL_CFG_SAR_BOFFSET_CORRECTION_ENABLE 220 +#define WCN36XX_HAL_CFG_UNITS_OF_BCN_WAIT_TIME 221 +#define WCN36XX_HAL_CFG_CONS_BCNMISS_COUNT 222 +#define WCN36XX_HAL_CFG_BTC_DISABLE_WLAN_LINK_CRITICAL 223 +#define WCN36XX_HAL_CFG_DISABLE_SCAN_DURING_SCO 224 +#define WCN36XX_HAL_CFG_TRIGGER_NULLFRAME_BEFORE_HB 225 +#define WCN36XX_HAL_CFG_ENABLE_POWERSAVE_OFFLOAD 226 +#define WCN36XX_HAL_CFG_MAX_PARAMS 227 + +/* Specify the starting bitrate, 11B and 11A/G rates can be specified in + * multiples of 0.5 So for 5.5 mbps => 11. for MCS 0 - 7 rates, Bit 7 should + * set to 1 and Bit 0-6 represent the MCS index. so for MCS2 => 130. + * Any invalid non-zero value or unsupported rate will set the start rate + * to 6 mbps. + */ +#define WCN36XX_HAL_CFG_ENABLE_DYNAMIC_RA_START_RATE 210 + +/* Message definitons - All the messages below need to be packed */ + +/* Definition for HAL API Version. */ +struct wcnss_wlan_version { + u8 revision; + u8 version; + u8 minor; + u8 major; +} __packed; + +/* Definition for Encryption Keys */ +struct wcn36xx_hal_keys { + u8 id; + + /* 0 for multicast */ + u8 unicast; + + enum ani_key_direction direction; + + /* Usage is unknown */ + u8 rsc[WLAN_MAX_KEY_RSC_LEN]; + + /* =1 for authenticator,=0 for supplicant */ + u8 pae_role; + + u16 length; + u8 key[WCN36XX_HAL_MAC_MAX_KEY_LENGTH]; +} __packed; + +/* + * set_sta_key_params Moving here since it is shared by + * configbss/setstakey msgs + */ +struct wcn36xx_hal_set_sta_key_params { + /* STA Index */ + u16 sta_index; + + /* Encryption Type used with peer */ + enum ani_ed_type enc_type; + + /* STATIC/DYNAMIC - valid only for WEP */ + enum ani_wep_type wep_type; + + /* Default WEP key, valid only for static WEP, must between 0 and 3. */ + u8 def_wep_idx; + + /* valid only for non-static WEP encyrptions */ + struct wcn36xx_hal_keys key[WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS]; + + /* + * Control for Replay Count, 1= Single TID based replay count on Tx + * 0 = Per TID based replay count on TX + */ + u8 single_tid_rc; + +} __packed; + +/* 4-byte control message header used by HAL*/ +struct wcn36xx_hal_msg_header { + enum wcn36xx_hal_host_msg_type msg_type:16; + enum wcn36xx_hal_host_msg_version msg_version:16; + u32 len; +} __packed; + +/* Config format required by HAL for each CFG item*/ +struct wcn36xx_hal_cfg { + /* Cfg Id. The Id required by HAL is exported by HAL + * in shared header file between UMAC and HAL.*/ + u16 id; + + /* Length of the Cfg. This parameter is used to go to next cfg + * in the TLV format.*/ + u16 len; + + /* Padding bytes for unaligned address's */ + u16 pad_bytes; + + /* Reserve bytes for making cfgVal to align address */ + u16 reserve; + + /* Following the uCfgLen field there should be a 'uCfgLen' bytes + * containing the uCfgValue ; u8 uCfgValue[uCfgLen] */ +} __packed; + +struct wcn36xx_hal_mac_start_parameters { + /* Drive Type - Production or FTM etc */ + enum driver_type type; + + /* Length of the config buffer */ + u32 len; + + /* Following this there is a TLV formatted buffer of length + * "len" bytes containing all config values. + * The TLV is expected to be formatted like this: + * 0 15 31 31+CFG_LEN-1 length-1 + * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......| + */ +} __packed; + +struct wcn36xx_hal_mac_start_req_msg { + /* config buffer must start in TLV format just here */ + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_mac_start_parameters params; +} __packed; + +struct wcn36xx_hal_mac_start_rsp_params { + /* success or failure */ + u16 status; + + /* Max number of STA supported by the device */ + u8 stations; + + /* Max number of BSS supported by the device */ + u8 bssids; + + /* API Version */ + struct wcnss_wlan_version version; + + /* CRM build information */ + u8 crm_version[WCN36XX_HAL_VERSION_LENGTH]; + + /* hardware/chipset/misc version information */ + u8 wlan_version[WCN36XX_HAL_VERSION_LENGTH]; + +} __packed; + +struct wcn36xx_hal_mac_start_rsp_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_mac_start_rsp_params start_rsp_params; +} __packed; + +struct wcn36xx_hal_mac_stop_req_params { + /* The reason for which the device is being stopped */ + enum wcn36xx_hal_stop_type reason; + +} __packed; + +struct wcn36xx_hal_mac_stop_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_mac_stop_req_params stop_req_params; +} __packed; + +struct wcn36xx_hal_mac_stop_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +struct wcn36xx_hal_update_cfg_req_msg { + /* + * Note: The length specified in tHalUpdateCfgReqMsg messages should be + * header.msgLen = sizeof(tHalUpdateCfgReqMsg) + uConfigBufferLen + */ + struct wcn36xx_hal_msg_header header; + + /* Length of the config buffer. Allows UMAC to update multiple CFGs */ + u32 len; + + /* + * Following this there is a TLV formatted buffer of length + * "uConfigBufferLen" bytes containing all config values. + * The TLV is expected to be formatted like this: + * 0 15 31 31+CFG_LEN-1 length-1 + * | CFG_ID | CFG_LEN | CFG_BODY | CFG_ID |......| + */ + +} __packed; + +struct wcn36xx_hal_update_cfg_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + +} __packed; + +/* Frame control field format (2 bytes) */ +struct wcn36xx_hal_mac_frame_ctl { + +#ifndef ANI_LITTLE_BIT_ENDIAN + + u8 subType:4; + u8 type:2; + u8 protVer:2; + + u8 order:1; + u8 wep:1; + u8 moreData:1; + u8 powerMgmt:1; + u8 retry:1; + u8 moreFrag:1; + u8 fromDS:1; + u8 toDS:1; + +#else + + u8 protVer:2; + u8 type:2; + u8 subType:4; + + u8 toDS:1; + u8 fromDS:1; + u8 moreFrag:1; + u8 retry:1; + u8 powerMgmt:1; + u8 moreData:1; + u8 wep:1; + u8 order:1; + +#endif + +}; + +/* Sequence control field */ +struct wcn36xx_hal_mac_seq_ctl { + u8 fragNum:4; + u8 seqNumLo:4; + u8 seqNumHi:8; +}; + +/* Management header format */ +struct wcn36xx_hal_mac_mgmt_hdr { + struct wcn36xx_hal_mac_frame_ctl fc; + u8 durationLo; + u8 durationHi; + u8 da[6]; + u8 sa[6]; + u8 bssId[6]; + struct wcn36xx_hal_mac_seq_ctl seqControl; +}; + +/* FIXME: pronto v1 apparently has 4 */ +#define WCN36XX_HAL_NUM_BSSID 2 + +/* Scan Entry to hold active BSS idx's */ +struct wcn36xx_hal_scan_entry { + u8 bss_index[WCN36XX_HAL_NUM_BSSID]; + u8 active_bss_count; +}; + +struct wcn36xx_hal_init_scan_req_msg { + struct wcn36xx_hal_msg_header header; + + /* LEARN - AP Role + SCAN - STA Role */ + enum wcn36xx_hal_sys_mode mode; + + /* BSSID of the BSS */ + u8 bssid[ETH_ALEN]; + + /* Whether BSS needs to be notified */ + u8 notify; + + /* Kind of frame to be used for notifying the BSS (Data Null, QoS + * Null, or CTS to Self). Must always be a valid frame type. */ + u8 frame_type; + + /* UMAC has the option of passing the MAC frame to be used for + * notifying the BSS. If non-zero, HAL will use the MAC frame + * buffer pointed to by macMgmtHdr. If zero, HAL will generate the + * appropriate MAC frame based on frameType. */ + u8 frame_len; + + /* Following the framelength there is a MAC frame buffer if + * frameLength is non-zero. */ + struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; + + /* Entry to hold number of active BSS idx's */ + struct wcn36xx_hal_scan_entry scan_entry; +}; + +struct wcn36xx_hal_init_scan_con_req_msg { + struct wcn36xx_hal_msg_header header; + + /* LEARN - AP Role + SCAN - STA Role */ + enum wcn36xx_hal_sys_mode mode; + + /* BSSID of the BSS */ + u8 bssid[ETH_ALEN]; + + /* Whether BSS needs to be notified */ + u8 notify; + + /* Kind of frame to be used for notifying the BSS (Data Null, QoS + * Null, or CTS to Self). Must always be a valid frame type. */ + u8 frame_type; + + /* UMAC has the option of passing the MAC frame to be used for + * notifying the BSS. If non-zero, HAL will use the MAC frame + * buffer pointed to by macMgmtHdr. If zero, HAL will generate the + * appropriate MAC frame based on frameType. */ + u8 frame_length; + + /* Following the framelength there is a MAC frame buffer if + * frameLength is non-zero. */ + struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; + + /* Entry to hold number of active BSS idx's */ + struct wcn36xx_hal_scan_entry scan_entry; + + /* Single NoA usage in Scanning */ + u8 use_noa; + + /* Indicates the scan duration (in ms) */ + u16 scan_duration; + +}; + +struct wcn36xx_hal_init_scan_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + +} __packed; + +struct wcn36xx_hal_start_scan_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Indicates the channel to scan */ + u8 scan_channel; +} __packed; + +struct wcn36xx_hal_start_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u32 start_tsf[2]; + u8 tx_mgmt_power; + +} __packed; + +struct wcn36xx_hal_end_scan_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Indicates the channel to stop scanning. Not used really. But + * retained for symmetry with "start Scan" message. It can also + * help in error check if needed. */ + u8 scan_channel; +} __packed; + +struct wcn36xx_hal_end_scan_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +struct wcn36xx_hal_finish_scan_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Identifies the operational state of the AP/STA + * LEARN - AP Role SCAN - STA Role */ + enum wcn36xx_hal_sys_mode mode; + + /* Operating channel to tune to. */ + u8 oper_channel; + + /* Channel Bonding state If 20/40 MHz is operational, this will + * indicate the 40 MHz extension channel in combination with the + * control channel */ + enum phy_chan_bond_state cb_state; + + /* BSSID of the BSS */ + u8 bssid[ETH_ALEN]; + + /* Whether BSS needs to be notified */ + u8 notify; + + /* Kind of frame to be used for notifying the BSS (Data Null, QoS + * Null, or CTS to Self). Must always be a valid frame type. */ + u8 frame_type; + + /* UMAC has the option of passing the MAC frame to be used for + * notifying the BSS. If non-zero, HAL will use the MAC frame + * buffer pointed to by macMgmtHdr. If zero, HAL will generate the + * appropriate MAC frame based on frameType. */ + u8 frame_length; + + /* Following the framelength there is a MAC frame buffer if + * frameLength is non-zero. */ + struct wcn36xx_hal_mac_mgmt_hdr mac_mgmt_hdr; + + /* Entry to hold number of active BSS idx's */ + struct wcn36xx_hal_scan_entry scan_entry; + +} __packed; + +struct wcn36xx_hal_finish_scan_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + +} __packed; + +enum wcn36xx_hal_scan_type { + WCN36XX_HAL_SCAN_TYPE_PASSIVE = 0x00, + WCN36XX_HAL_SCAN_TYPE_ACTIVE = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +struct wcn36xx_hal_mac_ssid { + u8 length; + u8 ssid[32]; +} __packed; + +struct wcn36xx_hal_start_scan_offload_req_msg { + struct wcn36xx_hal_msg_header header; + + /* BSSIDs hot list */ + u8 num_bssid; + u8 bssids[4][ETH_ALEN]; + + /* Directed probe-requests will be sent for listed SSIDs (max 10)*/ + u8 num_ssid; + struct wcn36xx_hal_mac_ssid ssids[10]; + + /* Report AP with hidden ssid */ + u8 scan_hidden; + + /* Self MAC address */ + u8 mac[ETH_ALEN]; + + /* BSS type */ + enum wcn36xx_hal_bss_type bss_type; + + /* Scan type */ + enum wcn36xx_hal_scan_type scan_type; + + /* Minimum scanning time on each channel (ms) */ + u32 min_ch_time; + + /* Maximum scanning time on each channel */ + u32 max_ch_time; + + /* Is a p2p search */ + u8 p2p_search; + + /* Channels to scan */ + u8 num_channel; + u8 channels[80]; + + /* IE field */ + u16 ie_len; + u8 ie[WCN36XX_MAX_SCAN_IE_LEN]; +} __packed; + +struct wcn36xx_hal_start_scan_offload_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +enum wcn36xx_hal_scan_offload_ind_type { + /* Scan has been started */ + WCN36XX_HAL_SCAN_IND_STARTED = 0x01, + /* Scan has been completed */ + WCN36XX_HAL_SCAN_IND_COMPLETED = 0x02, + /* Moved to foreign channel */ + WCN36XX_HAL_SCAN_IND_FOREIGN_CHANNEL = 0x08, + /* scan request has been dequeued */ + WCN36XX_HAL_SCAN_IND_DEQUEUED = 0x10, + /* preempted by other high priority scan */ + WCN36XX_HAL_SCAN_IND_PREEMPTED = 0x20, + /* scan start failed */ + WCN36XX_HAL_SCAN_IND_FAILED = 0x40, + /*scan restarted */ + WCN36XX_HAL_SCAN_IND_RESTARTED = 0x80, + WCN36XX_HAL_SCAN_IND_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +struct wcn36xx_hal_scan_offload_ind { + struct wcn36xx_hal_msg_header header; + + u32 type; + u32 channel_mhz; + u32 scan_id; +} __packed; + +struct wcn36xx_hal_stop_scan_offload_req_msg { + struct wcn36xx_hal_msg_header header; +} __packed; + +struct wcn36xx_hal_stop_scan_offload_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +#define WCN36XX_HAL_CHAN_REG1_MIN_PWR_MASK 0x000000ff +#define WCN36XX_HAL_CHAN_REG1_MAX_PWR_MASK 0x0000ff00 +#define WCN36XX_HAL_CHAN_REG1_REG_PWR_MASK 0x00ff0000 +#define WCN36XX_HAL_CHAN_REG1_CLASS_ID_MASK 0xff000000 +#define WCN36XX_HAL_CHAN_REG2_ANT_GAIN_MASK 0x000000ff +#define WCN36XX_HAL_CHAN_INFO_FLAG_PASSIVE BIT(7) +#define WCN36XX_HAL_CHAN_INFO_FLAG_DFS BIT(10) +#define WCN36XX_HAL_CHAN_INFO_FLAG_HT BIT(11) +#define WCN36XX_HAL_CHAN_INFO_FLAG_VHT BIT(12) +#define WCN36XX_HAL_CHAN_INFO_PHY_11A 0 +#define WCN36XX_HAL_CHAN_INFO_PHY_11BG 1 +#define WCN36XX_HAL_DEFAULT_ANT_GAIN 6 +#define WCN36XX_HAL_DEFAULT_MIN_POWER 6 + +struct wcn36xx_hal_channel_param { + u32 mhz; + u32 band_center_freq1; + u32 band_center_freq2; + u32 channel_info; + u32 reg_info_1; + u32 reg_info_2; +} __packed; + +struct wcn36xx_hal_update_channel_list_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 num_channel; + struct wcn36xx_hal_channel_param channels[80]; +} __packed; + +enum wcn36xx_hal_rate_index { + HW_RATE_INDEX_1MBPS = 0x82, + HW_RATE_INDEX_2MBPS = 0x84, + HW_RATE_INDEX_5_5MBPS = 0x8B, + HW_RATE_INDEX_6MBPS = 0x0C, + HW_RATE_INDEX_9MBPS = 0x12, + HW_RATE_INDEX_11MBPS = 0x96, + HW_RATE_INDEX_12MBPS = 0x18, + HW_RATE_INDEX_18MBPS = 0x24, + HW_RATE_INDEX_24MBPS = 0x30, + HW_RATE_INDEX_36MBPS = 0x48, + HW_RATE_INDEX_48MBPS = 0x60, + HW_RATE_INDEX_54MBPS = 0x6C +}; + +struct wcn36xx_hal_supported_rates { + /* + * For Self STA Entry: this represents Self Mode. + * For Peer Stations, this represents the mode of the peer. + * On Station: + * + * --this mode is updated when PE adds the Self Entry. + * + * -- OR when PE sends 'ADD_BSS' message and station context in BSS + * is used to indicate the mode of the AP. + * + * ON AP: + * + * -- this mode is updated when PE sends 'ADD_BSS' and Sta entry + * for that BSS is used to indicate the self mode of the AP. + * + * -- OR when a station is associated, PE sends 'ADD_STA' message + * with this mode updated. + */ + + enum sta_rate_mode op_rate_mode; + + /* 11b, 11a and aniLegacyRates are IE rates which gives rate in + * unit of 500Kbps */ + u16 dsss_rates[WCN36XX_HAL_NUM_DSSS_RATES]; + u16 ofdm_rates[WCN36XX_HAL_NUM_OFDM_RATES]; + u16 legacy_rates[WCN36XX_HAL_NUM_POLARIS_RATES]; + u16 reserved; + + /* Taurus only supports 26 Titan Rates(no ESF/concat Rates will be + * supported) First 26 bits are reserved for those Titan rates and + * the last 4 bits(bit28-31) for Taurus, 2(bit26-27) bits are + * reserved. */ + /* Titan and Taurus Rates */ + u32 enhanced_rate_bitmap; + + /* + * 0-76 bits used, remaining reserved + * bits 0-15 and 32 should be set. + */ + u8 supported_mcs_set[WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET]; + + /* + * RX Highest Supported Data Rate defines the highest data + * rate that the STA is able to receive, in unites of 1Mbps. + * This value is derived from "Supported MCS Set field" inside + * the HT capability element. + */ + u16 rx_highest_data_rate; + +} __packed; + +struct wcn36xx_hal_config_sta_params { + /* BSSID of STA */ + u8 bssid[ETH_ALEN]; + + /* ASSOC ID, as assigned by UMAC */ + u16 aid; + + /* STA entry Type: 0 - Self, 1 - Other/Peer, 2 - BSSID, 3 - BCAST */ + u8 type; + + /* Short Preamble Supported. */ + u8 short_preamble_supported; + + /* MAC Address of STA */ + u8 mac[ETH_ALEN]; + + /* Listen interval of the STA */ + u16 listen_interval; + + /* Support for 11e/WMM */ + u8 wmm_enabled; + + /* 11n HT capable STA */ + u8 ht_capable; + + /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ + u8 tx_channel_width_set; + + /* RIFS mode 0 - NA, 1 - Allowed */ + u8 rifs_mode; + + /* L-SIG TXOP Protection mechanism + 0 - No Support, 1 - Supported + SG - there is global field */ + u8 lsig_txop_protection; + + /* Max Ampdu Size supported by STA. TPE programming. + 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k */ + u8 max_ampdu_size; + + /* Max Ampdu density. Used by RA. 3 : 0~7 : 2^(11nAMPDUdensity -4) */ + u8 max_ampdu_density; + + /* Max AMSDU size 1 : 3839 bytes, 0 : 7935 bytes */ + u8 max_amsdu_size; + + /* Short GI support for 40Mhz packets */ + u8 sgi_40mhz; + + /* Short GI support for 20Mhz packets */ + u8 sgi_20Mhz; + + /* TODO move this parameter to the end for 3680 */ + /* These rates are the intersection of peer and self capabilities. */ + struct wcn36xx_hal_supported_rates supported_rates; + + /* Robust Management Frame (RMF) enabled/disabled */ + u8 rmf; + + /* The unicast encryption type in the association */ + u32 encrypt_type; + + /* HAL should update the existing STA entry, if this flag is set. UMAC + will set this flag in case of RE-ASSOC, where we want to reuse the + old STA ID. 0 = Add, 1 = Update */ + u8 action; + + /* U-APSD Flags: 1b per AC. Encoded as follows: + b7 b6 b5 b4 b3 b2 b1 b0 = + X X X X BE BK VI VO */ + u8 uapsd; + + /* Max SP Length */ + u8 max_sp_len; + + /* 11n Green Field preamble support + 0 - Not supported, 1 - Supported */ + u8 green_field_capable; + + /* MIMO Power Save mode */ + enum wcn36xx_hal_ht_mimo_state mimo_ps; + + /* Delayed BA Support */ + u8 delayed_ba_support; + + /* Max AMPDU duration in 32us */ + u8 max_ampdu_duration; + + /* HT STA should set it to 1 if it is enabled in BSS. HT STA should + * set it to 0 if AP does not support it. This indication is sent + * to HAL and HAL uses this flag to pickup up appropriate 40Mhz + * rates. */ + u8 dsss_cck_mode_40mhz; + + /* Valid STA Idx when action=Update. Set to 0xFF when invalid! + * Retained for backward compalibity with existing HAL code */ + u8 sta_index; + + /* BSSID of BSS to which station is associated. Set to 0xFF when + * invalid. Retained for backward compalibity with existing HAL + * code */ + u8 bssid_index; + + u8 p2p; + + /* TODO add this parameter for 3680. */ + /* Reserved to align next field on a dword boundary */ + /* u8 reserved; */ +} __packed; + +struct wcn36xx_hal_config_sta_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_config_sta_params sta_params; +} __packed; + +struct wcn36xx_hal_supported_rates_v1 { + /* For Self STA Entry: this represents Self Mode. + * For Peer Stations, this represents the mode of the peer. + * On Station: + * + * --this mode is updated when PE adds the Self Entry. + * + * -- OR when PE sends 'ADD_BSS' message and station context in BSS + * is used to indicate the mode of the AP. + * + * ON AP: + * + * -- this mode is updated when PE sends 'ADD_BSS' and Sta entry + * for that BSS is used to indicate the self mode of the AP. + * + * -- OR when a station is associated, PE sends 'ADD_STA' message + * with this mode updated. + */ + + enum sta_rate_mode op_rate_mode; + + /* 11b, 11a and aniLegacyRates are IE rates which gives rate in + * unit of 500Kbps + */ + u16 dsss_rates[WCN36XX_HAL_NUM_DSSS_RATES]; + u16 ofdm_rates[WCN36XX_HAL_NUM_OFDM_RATES]; + u16 legacy_rates[WCN36XX_HAL_NUM_POLARIS_RATES]; + u16 reserved; + + /* Taurus only supports 26 Titan Rates(no ESF/concat Rates will be + * supported) First 26 bits are reserved for those Titan rates and + * the last 4 bits(bit28-31) for Taurus, 2(bit26-27) bits are + * reserved + * Titan and Taurus Rates + */ + u32 enhanced_rate_bitmap; + + /* 0-76 bits used, remaining reserved + * bits 0-15 and 32 should be set. + */ + u8 supported_mcs_set[WCN36XX_HAL_MAC_MAX_SUPPORTED_MCS_SET]; + + /* RX Highest Supported Data Rate defines the highest data + * rate that the STA is able to receive, in unites of 1Mbps. + * This value is derived from "Supported MCS Set field" inside + * the HT capability element. + */ + u16 rx_highest_data_rate; + + /* Indicates the Maximum MCS that can be received for each spatial + * stream. + */ + u16 vht_rx_mcs_map; + + /* Indicates the highest VHT data rate that the STA is able to + * receive. + */ + u16 vht_rx_highest_data_rate; + + /* Indicates the Maximum MCS that can be transmitted for each spatial + * stream. + */ + u16 vht_tx_mcs_map; + + /* Indicates the highest VHT data rate that the STA is able to + * transmit. + */ + u16 vht_tx_highest_data_rate; +} __packed; + +struct wcn36xx_hal_config_sta_params_v1 { + /* BSSID of STA */ + u8 bssid[ETH_ALEN]; + + /* ASSOC ID, as assigned by UMAC */ + u16 aid; + + /* STA entry Type: 0 - Self, 1 - Other/Peer, 2 - BSSID, 3 - BCAST */ + u8 type; + + /* Short Preamble Supported. */ + u8 short_preamble_supported; + + /* MAC Address of STA */ + u8 mac[ETH_ALEN]; + + /* Listen interval of the STA */ + u16 listen_interval; + + /* Support for 11e/WMM */ + u8 wmm_enabled; + + /* 11n HT capable STA */ + u8 ht_capable; + + /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ + u8 tx_channel_width_set; + + /* RIFS mode 0 - NA, 1 - Allowed */ + u8 rifs_mode; + + /* L-SIG TXOP Protection mechanism + 0 - No Support, 1 - Supported + SG - there is global field */ + u8 lsig_txop_protection; + + /* Max Ampdu Size supported by STA. TPE programming. + 0 : 8k , 1 : 16k, 2 : 32k, 3 : 64k */ + u8 max_ampdu_size; + + /* Max Ampdu density. Used by RA. 3 : 0~7 : 2^(11nAMPDUdensity -4) */ + u8 max_ampdu_density; + + /* Max AMSDU size 1 : 3839 bytes, 0 : 7935 bytes */ + u8 max_amsdu_size; + + /* Short GI support for 40Mhz packets */ + u8 sgi_40mhz; + + /* Short GI support for 20Mhz packets */ + u8 sgi_20Mhz; + + /* Robust Management Frame (RMF) enabled/disabled */ + u8 rmf; + + /* The unicast encryption type in the association */ + u32 encrypt_type; + + /* HAL should update the existing STA entry, if this flag is set. UMAC + will set this flag in case of RE-ASSOC, where we want to reuse the + old STA ID. 0 = Add, 1 = Update */ + u8 action; + + /* U-APSD Flags: 1b per AC. Encoded as follows: + b7 b6 b5 b4 b3 b2 b1 b0 = + X X X X BE BK VI VO */ + u8 uapsd; + + /* Max SP Length */ + u8 max_sp_len; + + /* 11n Green Field preamble support + 0 - Not supported, 1 - Supported */ + u8 green_field_capable; + + /* MIMO Power Save mode */ + enum wcn36xx_hal_ht_mimo_state mimo_ps; + + /* Delayed BA Support */ + u8 delayed_ba_support; + + /* Max AMPDU duration in 32us */ + u8 max_ampdu_duration; + + /* HT STA should set it to 1 if it is enabled in BSS. HT STA should + * set it to 0 if AP does not support it. This indication is sent + * to HAL and HAL uses this flag to pickup up appropriate 40Mhz + * rates. */ + u8 dsss_cck_mode_40mhz; + + /* Valid STA Idx when action=Update. Set to 0xFF when invalid! + * Retained for backward compalibity with existing HAL code */ + u8 sta_index; + + /* BSSID of BSS to which station is associated. Set to 0xFF when + * invalid. Retained for backward compalibity with existing HAL + * code */ + u8 bssid_index; + + u8 p2p; + + /* Reserved to align next field on a dword boundary */ + u8 ht_ldpc_enabled:1; + u8 vht_ldpc_enabled:1; + u8 vht_tx_bf_enabled:1; + u8 vht_tx_mu_beamformee_capable:1; + u8 reserved:4; + + /* These rates are the intersection of peer and self capabilities. */ + struct wcn36xx_hal_supported_rates_v1 supported_rates; + + u8 vht_capable; + u8 vht_tx_channel_width_set; + +} __packed; + +#define WCN36XX_DIFF_STA_PARAMS_V1_NOVHT 10 + +struct wcn36xx_hal_config_sta_req_msg_v1 { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_config_sta_params_v1 sta_params; +} __packed; + +struct config_sta_rsp_params { + /* success or failure */ + u32 status; + + /* Station index; valid only when 'status' field value SUCCESS */ + u8 sta_index; + + /* BSSID Index of BSS to which the station is associated */ + u8 bssid_index; + + /* DPU Index for PTK */ + u8 dpu_index; + + /* DPU Index for GTK */ + u8 bcast_dpu_index; + + /* DPU Index for IGTK */ + u8 bcast_mgmt_dpu_idx; + + /* PTK DPU signature */ + u8 uc_ucast_sig; + + /* GTK DPU isignature */ + u8 uc_bcast_sig; + + /* IGTK DPU signature */ + u8 uc_mgmt_sig; + + u8 p2p; + +} __packed; + +struct wcn36xx_hal_config_sta_rsp_msg { + struct wcn36xx_hal_msg_header header; + + struct config_sta_rsp_params params; +} __packed; + +/* Delete STA Request message */ +struct wcn36xx_hal_delete_sta_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Index of STA to delete */ + u8 sta_index; + +} __packed; + +/* Delete STA Response message */ +struct wcn36xx_hal_delete_sta_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* Index of STA deleted */ + u8 sta_id; +} __packed; + +/* 12 Bytes long because this structure can be used to represent rate and + * extended rate set IEs. The parser assume this to be at least 12 */ +struct wcn36xx_hal_rate_set { + u8 num_rates; + u8 rate[WCN36XX_HAL_MAC_RATESET_EID_MAX]; +} __packed; + +/* access category record */ +struct wcn36xx_hal_aci_aifsn { +#ifndef ANI_LITTLE_BIT_ENDIAN + u8 rsvd:1; + u8 aci:2; + u8 acm:1; + u8 aifsn:4; +#else + u8 aifsn:4; + u8 acm:1; + u8 aci:2; + u8 rsvd:1; +#endif +} __packed; + +/* contention window size */ +struct wcn36xx_hal_mac_cw { +#ifndef ANI_LITTLE_BIT_ENDIAN + u8 max:4; + u8 min:4; +#else + u8 min:4; + u8 max:4; +#endif +} __packed; + +struct wcn36xx_hal_edca_param_record { + struct wcn36xx_hal_aci_aifsn aci; + struct wcn36xx_hal_mac_cw cw; + u16 txop_limit; +} __packed; + +/* Concurrency role. These are generic IDs that identify the various roles + * in the software system. */ +enum wcn36xx_hal_con_mode { + WCN36XX_HAL_STA_MODE = 0, + + /* to support softAp mode . This is misleading. + It means AP MODE only. */ + WCN36XX_HAL_STA_SAP_MODE = 1, + + WCN36XX_HAL_P2P_CLIENT_MODE, + WCN36XX_HAL_P2P_GO_MODE, + WCN36XX_HAL_MONITOR_MODE, +}; + +/* This is a bit pattern to be set for each mode + * bit 0 - sta mode + * bit 1 - ap mode + * bit 2 - p2p client mode + * bit 3 - p2p go mode */ +enum wcn36xx_hal_concurrency_mode { + HAL_STA = 1, + HAL_SAP = 2, + + /* to support sta, softAp mode . This means STA+AP mode */ + HAL_STA_SAP = 3, + + HAL_P2P_CLIENT = 4, + HAL_P2P_GO = 8, + HAL_MAX_CONCURRENCY_PERSONA = 4 +}; + +struct wcn36xx_hal_config_bss_params { + /* BSSID */ + u8 bssid[ETH_ALEN]; + + /* Self Mac Address */ + u8 self_mac_addr[ETH_ALEN]; + + /* BSS type */ + enum wcn36xx_hal_bss_type bss_type; + + /* Operational Mode: AP =0, STA = 1 */ + u8 oper_mode; + + /* Network Type */ + enum wcn36xx_hal_nw_type nw_type; + + /* Used to classify PURE_11G/11G_MIXED to program MTU */ + u8 short_slot_time_supported; + + /* Co-exist with 11a STA */ + u8 lla_coexist; + + /* Co-exist with 11b STA */ + u8 llb_coexist; + + /* Co-exist with 11g STA */ + u8 llg_coexist; + + /* Coexistence with 11n STA */ + u8 ht20_coexist; + + /* Non GF coexist flag */ + u8 lln_non_gf_coexist; + + /* TXOP protection support */ + u8 lsig_tx_op_protection_full_support; + + /* RIFS mode */ + u8 rifs_mode; + + /* Beacon Interval in TU */ + u16 beacon_interval; + + /* DTIM period */ + u8 dtim_period; + + /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ + u8 tx_channel_width_set; + + /* Operating channel */ + u8 oper_channel; + + /* Extension channel for channel bonding */ + u8 ext_channel; + + /* Reserved to align next field on a dword boundary */ + u8 reserved; + + /* TODO move sta to the end for 3680 */ + /* Context of the station being added in HW + * Add a STA entry for "itself" - + * + * On AP - Add the AP itself in an "STA context" + * + * On STA - Add the AP to which this STA is joining in an + * "STA context" + */ + struct wcn36xx_hal_config_sta_params sta; + /* SSID of the BSS */ + struct wcn36xx_hal_mac_ssid ssid; + + /* HAL should update the existing BSS entry, if this flag is set. + * UMAC will set this flag in case of reassoc, where we want to + * resue the old BSSID and still return success 0 = Add, 1 = + * Update */ + u8 action; + + /* MAC Rate Set */ + struct wcn36xx_hal_rate_set rateset; + + /* Enable/Disable HT capabilities of the BSS */ + u8 ht; + + /* Enable/Disable OBSS protection */ + u8 obss_prot_enabled; + + /* RMF enabled/disabled */ + u8 rmf; + + /* HT Operating Mode operating mode of the 802.11n STA */ + enum wcn36xx_hal_ht_operating_mode ht_oper_mode; + + /* Dual CTS Protection: 0 - Unused, 1 - Used */ + u8 dual_cts_protection; + + /* Probe Response Max retries */ + u8 max_probe_resp_retry_limit; + + /* To Enable Hidden ssid */ + u8 hidden_ssid; + + /* To Enable Disable FW Proxy Probe Resp */ + u8 proxy_probe_resp; + + /* Boolean to indicate if EDCA params are valid. UMAC might not + * have valid EDCA params or might not desire to apply EDCA params + * during config BSS. 0 implies Not Valid ; Non-Zero implies + * valid */ + u8 edca_params_valid; + + /* EDCA Parameters for Best Effort Access Category */ + struct wcn36xx_hal_edca_param_record acbe; + + /* EDCA Parameters forBackground Access Category */ + struct wcn36xx_hal_edca_param_record acbk; + + /* EDCA Parameters for Video Access Category */ + struct wcn36xx_hal_edca_param_record acvi; + + /* EDCA Parameters for Voice Access Category */ + struct wcn36xx_hal_edca_param_record acvo; + + /* Ext Bss Config Msg if set */ + u8 ext_set_sta_key_param_valid; + + /* SetStaKeyParams for ext bss msg */ + struct wcn36xx_hal_set_sta_key_params ext_set_sta_key_param; + + /* Persona for the BSS can be STA,AP,GO,CLIENT value same as enum + * wcn36xx_hal_con_mode */ + u8 wcn36xx_hal_persona; + + u8 spectrum_mgt_enable; + + /* HAL fills in the tx power used for mgmt frames in txMgmtPower */ + s8 tx_mgmt_power; + + /* maxTxPower has max power to be used after applying the power + * constraint if any */ + s8 max_tx_power; +} __packed; + +struct wcn36xx_hal_config_bss_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_config_bss_params bss_params; +} __packed; + +struct wcn36xx_hal_config_bss_params_v1 { + /* BSSID */ + u8 bssid[ETH_ALEN]; + + /* Self Mac Address */ + u8 self_mac_addr[ETH_ALEN]; + + /* BSS type */ + enum wcn36xx_hal_bss_type bss_type; + + /* Operational Mode: AP =0, STA = 1 */ + u8 oper_mode; + + /* Network Type */ + enum wcn36xx_hal_nw_type nw_type; + + /* Used to classify PURE_11G/11G_MIXED to program MTU */ + u8 short_slot_time_supported; + + /* Co-exist with 11a STA */ + u8 lla_coexist; + + /* Co-exist with 11b STA */ + u8 llb_coexist; + + /* Co-exist with 11g STA */ + u8 llg_coexist; + + /* Coexistence with 11n STA */ + u8 ht20_coexist; + + /* Non GF coexist flag */ + u8 lln_non_gf_coexist; + + /* TXOP protection support */ + u8 lsig_tx_op_protection_full_support; + + /* RIFS mode */ + u8 rifs_mode; + + /* Beacon Interval in TU */ + u16 beacon_interval; + + /* DTIM period */ + u8 dtim_period; + + /* TX Width Set: 0 - 20 MHz only, 1 - 20/40 MHz */ + u8 tx_channel_width_set; + + /* Operating channel */ + u8 oper_channel; + + /* Extension channel for channel bonding */ + u8 ext_channel; + + /* Reserved to align next field on a dword boundary */ + u8 reserved; + + /* SSID of the BSS */ + struct wcn36xx_hal_mac_ssid ssid; + + /* HAL should update the existing BSS entry, if this flag is set. + * UMAC will set this flag in case of reassoc, where we want to + * resue the old BSSID and still return success 0 = Add, 1 = + * Update */ + u8 action; + + /* MAC Rate Set */ + struct wcn36xx_hal_rate_set rateset; + + /* Enable/Disable HT capabilities of the BSS */ + u8 ht; + + /* Enable/Disable OBSS protection */ + u8 obss_prot_enabled; + + /* RMF enabled/disabled */ + u8 rmf; + + /* HT Operating Mode operating mode of the 802.11n STA */ + enum wcn36xx_hal_ht_operating_mode ht_oper_mode; + + /* Dual CTS Protection: 0 - Unused, 1 - Used */ + u8 dual_cts_protection; + + /* Probe Response Max retries */ + u8 max_probe_resp_retry_limit; + + /* To Enable Hidden ssid */ + u8 hidden_ssid; + + /* To Enable Disable FW Proxy Probe Resp */ + u8 proxy_probe_resp; + + /* Boolean to indicate if EDCA params are valid. UMAC might not + * have valid EDCA params or might not desire to apply EDCA params + * during config BSS. 0 implies Not Valid ; Non-Zero implies + * valid */ + u8 edca_params_valid; + + /* EDCA Parameters for Best Effort Access Category */ + struct wcn36xx_hal_edca_param_record acbe; + + /* EDCA Parameters forBackground Access Category */ + struct wcn36xx_hal_edca_param_record acbk; + + /* EDCA Parameters for Video Access Category */ + struct wcn36xx_hal_edca_param_record acvi; + + /* EDCA Parameters for Voice Access Category */ + struct wcn36xx_hal_edca_param_record acvo; + + /* Ext Bss Config Msg if set */ + u8 ext_set_sta_key_param_valid; + + /* SetStaKeyParams for ext bss msg */ + struct wcn36xx_hal_set_sta_key_params ext_set_sta_key_param; + + /* Persona for the BSS can be STA,AP,GO,CLIENT value same as enum + * wcn36xx_hal_con_mode */ + u8 wcn36xx_hal_persona; + + u8 spectrum_mgt_enable; + + /* HAL fills in the tx power used for mgmt frames in txMgmtPower */ + s8 tx_mgmt_power; + + /* maxTxPower has max power to be used after applying the power + * constraint if any */ + s8 max_tx_power; + + /* Context of the station being added in HW + * Add a STA entry for "itself" - + * + * On AP - Add the AP itself in an "STA context" + * + * On STA - Add the AP to which this STA is joining in an + * "STA context" + */ + struct wcn36xx_hal_config_sta_params_v1 sta; + + u8 vht_capable; + u8 vht_tx_channel_width_set; + +} __packed; + +#define WCN36XX_DIFF_BSS_PARAMS_V1_NOVHT (WCN36XX_DIFF_STA_PARAMS_V1_NOVHT + 2) + +struct wcn36xx_hal_config_bss_req_msg_v1 { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_config_bss_params_v1 bss_params; +} __packed; + +struct wcn36xx_hal_config_bss_rsp_params { + /* Success or Failure */ + u32 status; + + /* BSS index allocated by HAL */ + u8 bss_index; + + /* DPU descriptor index for PTK */ + u8 dpu_desc_index; + + /* PTK DPU signature */ + u8 ucast_dpu_signature; + + /* DPU descriptor index for GTK */ + u8 bcast_dpu_desc_indx; + + /* GTK DPU signature */ + u8 bcast_dpu_signature; + + /* DPU descriptor for IGTK */ + u8 mgmt_dpu_desc_index; + + /* IGTK DPU signature */ + u8 mgmt_dpu_signature; + + /* Station Index for BSS entry */ + u8 bss_sta_index; + + /* Self station index for this BSS */ + u8 bss_self_sta_index; + + /* Bcast station for buffering bcast frames in AP role */ + u8 bss_bcast_sta_idx; + + /* MAC Address of STA(PEER/SELF) in staContext of configBSSReq */ + u8 mac[ETH_ALEN]; + + /* HAL fills in the tx power used for mgmt frames in this field. */ + s8 tx_mgmt_power; + +} __packed; + +struct wcn36xx_hal_config_bss_rsp_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_config_bss_rsp_params bss_rsp_params; +} __packed; + +struct wcn36xx_hal_delete_bss_req_msg { + struct wcn36xx_hal_msg_header header; + + /* BSS index to be deleted */ + u8 bss_index; + +} __packed; + +struct wcn36xx_hal_delete_bss_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Success or Failure */ + u32 status; + + /* BSS index that has been deleted */ + u8 bss_index; + +} __packed; + +struct wcn36xx_hal_join_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Indicates the BSSID to which STA is going to associate */ + u8 bssid[ETH_ALEN]; + + /* Indicates the channel to switch to. */ + u8 channel; + + /* Self STA MAC */ + u8 self_sta_mac_addr[ETH_ALEN]; + + /* Local power constraint */ + u8 local_power_constraint; + + /* Secondary channel offset */ + enum phy_chan_bond_state secondary_channel_offset; + + /* link State */ + enum wcn36xx_hal_link_state link_state; + + /* Max TX power */ + s8 max_tx_power; +} __packed; + +struct wcn36xx_hal_join_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* HAL fills in the tx power used for mgmt frames in this field */ + u8 tx_mgmt_power; +} __packed; + +struct post_assoc_req_msg { + struct wcn36xx_hal_msg_header header; + + struct wcn36xx_hal_config_sta_params sta_params; + struct wcn36xx_hal_config_bss_params bss_params; +}; + +struct post_assoc_rsp_msg { + struct wcn36xx_hal_msg_header header; + struct config_sta_rsp_params sta_rsp_params; + struct wcn36xx_hal_config_bss_rsp_params bss_rsp_params; +}; + +/* This is used to create a set of WEP keys for a given BSS. */ +struct wcn36xx_hal_set_bss_key_req_msg { + struct wcn36xx_hal_msg_header header; + + /* BSS Index of the BSS */ + u8 bss_idx; + + /* Encryption Type used with peer */ + enum ani_ed_type enc_type; + + /* Number of keys */ + u8 num_keys; + + /* Array of keys. */ + struct wcn36xx_hal_keys keys[WCN36XX_HAL_MAC_MAX_NUM_OF_DEFAULT_KEYS]; + + /* Control for Replay Count, 1= Single TID based replay count on Tx + * 0 = Per TID based replay count on TX */ + u8 single_tid_rc; +} __packed; + +/* tagged version of set bss key */ +struct wcn36xx_hal_set_bss_key_req_msg_tagged { + struct wcn36xx_hal_set_bss_key_req_msg Msg; + u32 tag; +} __packed; + +struct wcn36xx_hal_set_bss_key_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +/* + * This is used configure the key information on a given station. + * When the sec_type is WEP40 or WEP104, the def_wep_idx is used to locate + * a preconfigured key from a BSS the station associated with; otherwise + * a new key descriptor is created based on the key field. + */ +struct wcn36xx_hal_set_sta_key_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_set_sta_key_params set_sta_key_params; +} __packed; + +struct wcn36xx_hal_set_sta_key_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +struct wcn36xx_hal_remove_bss_key_req_msg { + struct wcn36xx_hal_msg_header header; + + /* BSS Index of the BSS */ + u8 bss_idx; + + /* Encryption Type used with peer */ + enum ani_ed_type enc_type; + + /* Key Id */ + u8 key_id; + + /* STATIC/DYNAMIC. Used in Nullifying in Key Descriptors for + * Static/Dynamic keys */ + enum ani_wep_type wep_type; +} __packed; + +struct wcn36xx_hal_remove_bss_key_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +/* + * This is used by PE to Remove the key information on a given station. + */ +struct wcn36xx_hal_remove_sta_key_req_msg { + struct wcn36xx_hal_msg_header header; + + /* STA Index */ + u16 sta_idx; + + /* Encryption Type used with peer */ + enum ani_ed_type enc_type; + + /* Key Id */ + u8 key_id; + + /* Whether to invalidate the Broadcast key or Unicast key. In case + * of WEP, the same key is used for both broadcast and unicast. */ + u8 unicast; + +} __packed; + +struct wcn36xx_hal_remove_sta_key_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /*success or failure */ + u32 status; + +} __packed; + +#ifdef FEATURE_OEM_DATA_SUPPORT + +#ifndef OEM_DATA_REQ_SIZE +#define OEM_DATA_REQ_SIZE 134 +#endif + +#ifndef OEM_DATA_RSP_SIZE +#define OEM_DATA_RSP_SIZE 1968 +#endif + +struct start_oem_data_req_msg { + struct wcn36xx_hal_msg_header header; + + u32 status; + tSirMacAddr self_mac_addr; + u8 oem_data_req[OEM_DATA_REQ_SIZE]; + +}; + +struct start_oem_data_rsp_msg { + struct wcn36xx_hal_msg_header header; + + u8 oem_data_rsp[OEM_DATA_RSP_SIZE]; +}; + +#endif + +struct wcn36xx_hal_switch_channel_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Channel number */ + u8 channel_number; + + /* Local power constraint */ + u8 local_power_constraint; + + /* Secondary channel offset */ + enum phy_chan_bond_state secondary_channel_offset; + + /* HAL fills in the tx power used for mgmt frames in this field. */ + u8 tx_mgmt_power; + + /* Max TX power */ + u8 max_tx_power; + + /* Self STA MAC */ + u8 self_sta_mac_addr[ETH_ALEN]; + + /* VO WIFI comment: BSSID needed to identify session. As the + * request has power constraints, this should be applied only to + * that session Since MTU timing and EDCA are sessionized, this + * struct needs to be sessionized and bssid needs to be out of the + * VOWifi feature flag V IMP: Keep bssId field at the end of this + * msg. It is used to mantain backward compatbility by way of + * ignoring if using new host/old FW or old host/new FW since it is + * at the end of this struct + */ + u8 bssid[ETH_ALEN]; +} __packed; + +struct wcn36xx_hal_switch_channel_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Status */ + u32 status; + + /* Channel number - same as in request */ + u8 channel_number; + + /* HAL fills in the tx power used for mgmt frames in this field */ + u8 tx_mgmt_power; + + /* BSSID needed to identify session - same as in request */ + u8 bssid[ETH_ALEN]; + +} __packed; + +struct wcn36xx_hal_process_ptt_msg_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Actual FTM Command body */ + u8 ptt_msg[]; +} __packed; + +struct wcn36xx_hal_process_ptt_msg_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* FTM Command response status */ + u32 ptt_msg_resp_status; + /* Actual FTM Command body */ + u8 ptt_msg[]; +} __packed; + +struct update_edca_params_req_msg { + struct wcn36xx_hal_msg_header header; + + /*BSS Index */ + u16 bss_index; + + /* Best Effort */ + struct wcn36xx_hal_edca_param_record acbe; + + /* Background */ + struct wcn36xx_hal_edca_param_record acbk; + + /* Video */ + struct wcn36xx_hal_edca_param_record acvi; + + /* Voice */ + struct wcn36xx_hal_edca_param_record acvo; +}; + +struct update_edca_params_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct dpu_stats_params { + /* Index of STA to which the statistics */ + u16 sta_index; + + /* Encryption mode */ + u8 enc_mode; + + /* status */ + u32 status; + + /* Statistics */ + u32 send_blocks; + u32 recv_blocks; + u32 replays; + u8 mic_error_cnt; + u32 prot_excl_cnt; + u16 format_err_cnt; + u16 un_decryptable_cnt; + u32 decrypt_err_cnt; + u32 decrypt_ok_cnt; +}; + +struct wcn36xx_hal_stats_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Valid STA Idx for per STA stats request */ + u32 sta_id; + + /* Categories of stats requested as specified in eHalStatsMask */ + u32 stats_mask; +}; + +struct ani_summary_stats_info { + /* Total number of packets(per AC) that were successfully + * transmitted with retries */ + u32 retry_cnt[4]; + + /* The number of MSDU packets and MMPDU frames per AC that the + * 802.11 station successfully transmitted after more than one + * retransmission attempt */ + u32 multiple_retry_cnt[4]; + + /* Total number of packets(per AC) that were successfully + * transmitted (with and without retries, including multi-cast, + * broadcast) */ + u32 tx_frm_cnt[4]; + + /* Total number of packets that were successfully received (after + * appropriate filter rules including multi-cast, broadcast) */ + u32 rx_frm_cnt; + + /* Total number of duplicate frames received successfully */ + u32 frm_dup_cnt; + + /* Total number packets(per AC) failed to transmit */ + u32 fail_cnt[4]; + + /* Total number of RTS/CTS sequence failures for transmission of a + * packet */ + u32 rts_fail_cnt; + + /* Total number packets failed transmit because of no ACK from the + * remote entity */ + u32 ack_fail_cnt; + + /* Total number of RTS/CTS sequence success for transmission of a + * packet */ + u32 rts_succ_cnt; + + /* The sum of the receive error count and dropped-receive-buffer + * error count. HAL will provide this as a sum of (FCS error) + + * (Fail get BD/PDU in HW) */ + u32 rx_discard_cnt; + + /* + * The receive error count. HAL will provide the RxP FCS error + * global counter. */ + u32 rx_error_cnt; + + /* The sum of the transmit-directed byte count, transmit-multicast + * byte count and transmit-broadcast byte count. HAL will sum TPE + * UC/MC/BCAST global counters to provide this. */ + u32 tx_byte_cnt; +}; + +/* defines tx_rate_flags */ +enum tx_rate_info { + /* Legacy rates */ + HAL_TX_RATE_LEGACY = 0x1, + + /* HT20 rates */ + HAL_TX_RATE_HT20 = 0x2, + + /* HT40 rates */ + HAL_TX_RATE_HT40 = 0x4, + + /* Rate with Short guard interval */ + HAL_TX_RATE_SGI = 0x8, + + /* Rate with Long guard interval */ + HAL_TX_RATE_LGI = 0x10, + + /* VHT rates */ + HAL_TX_RATE_VHT20 = 0x20, + HAL_TX_RATE_VHT40 = 0x40, + HAL_TX_RATE_VHT80 = 0x80, +}; + +struct ani_global_class_a_stats_info { + /* The number of MPDU frames received by the 802.11 station for + * MSDU packets or MMPDU frames */ + u32 rx_frag_cnt; + + /* The number of MPDU frames received by the 802.11 station for + * MSDU packets or MMPDU frames when a promiscuous packet filter + * was enabled */ + u32 promiscuous_rx_frag_cnt; + + /* The receiver input sensitivity referenced to a FER of 8% at an + * MPDU length of 1024 bytes at the antenna connector. Each element + * of the array shall correspond to a supported rate and the order + * shall be the same as the supporteRates parameter. */ + u32 rx_input_sensitivity; + + /* The maximum transmit power in dBm upto one decimal. for eg: if + * it is 10.5dBm, the value would be 105 */ + u32 max_pwr; + + /* Number of times the receiver failed to synchronize with the + * incoming signal after detecting the sync in the preamble of the + * transmitted PLCP protocol data unit. */ + u32 sync_fail_cnt; + + /* Legacy transmit rate, in units of 500 kbit/sec, for the most + * recently transmitted frame */ + u32 tx_rate; + + /* mcs index for HT20 and HT40 rates */ + u32 mcs_index; + + /* to differentiate between HT20 and HT40 rates; short and long + * guard interval */ + u32 tx_rate_flags; +}; + +struct ani_global_security_stats { + /* The number of unencrypted received MPDU frames that the MAC + * layer discarded when the IEEE 802.11 dot11ExcludeUnencrypted + * management information base (MIB) object is enabled */ + u32 rx_wep_unencrypted_frm_cnt; + + /* The number of received MSDU packets that the 802.11 station + * discarded because of MIC failures */ + u32 rx_mic_fail_cnt; + + /* The number of encrypted MPDU frames that the 802.11 station + * failed to decrypt because of a TKIP ICV error */ + u32 tkip_icv_err; + + /* The number of received MPDU frames that the 802.11 discarded + * because of an invalid AES-CCMP format */ + u32 aes_ccmp_format_err; + + /* The number of received MPDU frames that the 802.11 station + * discarded because of the AES-CCMP replay protection procedure */ + u32 aes_ccmp_replay_cnt; + + /* The number of received MPDU frames that the 802.11 station + * discarded because of errors detected by the AES-CCMP decryption + * algorithm */ + u32 aes_ccmp_decrpt_err; + + /* The number of encrypted MPDU frames received for which a WEP + * decryption key was not available on the 802.11 station */ + u32 wep_undecryptable_cnt; + + /* The number of encrypted MPDU frames that the 802.11 station + * failed to decrypt because of a WEP ICV error */ + u32 wep_icv_err; + + /* The number of received encrypted packets that the 802.11 station + * successfully decrypted */ + u32 rx_decrypt_succ_cnt; + + /* The number of encrypted packets that the 802.11 station failed + * to decrypt */ + u32 rx_decrypt_fail_cnt; +}; + +struct ani_global_class_b_stats_info { + struct ani_global_security_stats uc_stats; + struct ani_global_security_stats mc_bc_stats; +}; + +struct ani_global_class_c_stats_info { + /* This counter shall be incremented for a received A-MSDU frame + * with the stations MAC address in the address 1 field or an + * A-MSDU frame with a group address in the address 1 field */ + u32 rx_amsdu_cnt; + + /* This counter shall be incremented when the MAC receives an AMPDU + * from the PHY */ + u32 rx_ampdu_cnt; + + /* This counter shall be incremented when a Frame is transmitted + * only on the primary channel */ + u32 tx_20_frm_cnt; + + /* This counter shall be incremented when a Frame is received only + * on the primary channel */ + u32 rx_20_frm_cnt; + + /* This counter shall be incremented by the number of MPDUs + * received in the A-MPDU when an A-MPDU is received */ + u32 rx_mpdu_in_ampdu_cnt; + + /* This counter shall be incremented when an MPDU delimiter has a + * CRC error when this is the first CRC error in the received AMPDU + * or when the previous delimiter has been decoded correctly */ + u32 ampdu_delimiter_crc_err; +}; + +struct ani_per_sta_stats_info { + /* The number of MPDU frames that the 802.11 station transmitted + * and acknowledged through a received 802.11 ACK frame */ + u32 tx_frag_cnt[4]; + + /* This counter shall be incremented when an A-MPDU is transmitted */ + u32 tx_ampdu_cnt; + + /* This counter shall increment by the number of MPDUs in the AMPDU + * when an A-MPDU is transmitted */ + u32 tx_mpdu_in_ampdu_cnt; +}; + +struct wcn36xx_hal_stats_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Success or Failure */ + u32 status; + + /* STA Idx */ + u32 sta_index; + + /* Categories of STATS being returned as per eHalStatsMask */ + u32 stats_mask; + + /* message type is same as the request type */ + u16 msg_type; + + /* length of the entire request, includes the pStatsBuf length too */ + u16 msg_len; +}; + +struct wcn36xx_hal_set_link_state_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bssid[ETH_ALEN]; + enum wcn36xx_hal_link_state state; + u8 self_mac_addr[ETH_ALEN]; + +} __packed; + +struct set_link_state_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +/* TSPEC Params */ +struct wcn36xx_hal_ts_info_tfc { +#ifndef ANI_LITTLE_BIT_ENDIAN + u16 ackPolicy:2; + u16 userPrio:3; + u16 psb:1; + u16 aggregation:1; + u16 accessPolicy:2; + u16 direction:2; + u16 tsid:4; + u16 trafficType:1; +#else + u16 trafficType:1; + u16 tsid:4; + u16 direction:2; + u16 accessPolicy:2; + u16 aggregation:1; + u16 psb:1; + u16 userPrio:3; + u16 ackPolicy:2; +#endif +}; + +/* Flag to schedule the traffic type */ +struct wcn36xx_hal_ts_info_sch { +#ifndef ANI_LITTLE_BIT_ENDIAN + u8 rsvd:7; + u8 schedule:1; +#else + u8 schedule:1; + u8 rsvd:7; +#endif +}; + +/* Traffic and scheduling info */ +struct wcn36xx_hal_ts_info { + struct wcn36xx_hal_ts_info_tfc traffic; + struct wcn36xx_hal_ts_info_sch schedule; +}; + +/* Information elements */ +struct wcn36xx_hal_tspec_ie { + u8 type; + u8 length; + struct wcn36xx_hal_ts_info ts_info; + u16 nom_msdu_size; + u16 max_msdu_size; + u32 min_svc_interval; + u32 max_svc_interval; + u32 inact_interval; + u32 suspend_interval; + u32 svc_start_time; + u32 min_data_rate; + u32 mean_data_rate; + u32 peak_data_rate; + u32 max_burst_sz; + u32 delay_bound; + u32 min_phy_rate; + u16 surplus_bw; + u16 medium_time; +}; + +struct add_ts_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index */ + u16 sta_index; + + /* TSPEC handler uniquely identifying a TSPEC for a STA in a BSS */ + u16 tspec_index; + + /* To program TPE with required parameters */ + struct wcn36xx_hal_tspec_ie tspec; + + /* U-APSD Flags: 1b per AC. Encoded as follows: + b7 b6 b5 b4 b3 b2 b1 b0 = + X X X X BE BK VI VO */ + u8 uapsd; + + /* These parameters are for all the access categories */ + + /* Service Interval */ + u32 service_interval[WCN36XX_HAL_MAX_AC]; + + /* Suspend Interval */ + u32 suspend_interval[WCN36XX_HAL_MAX_AC]; + + /* Delay Interval */ + u32 delay_interval[WCN36XX_HAL_MAX_AC]; +}; + +struct add_rs_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct del_ts_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index */ + u16 sta_index; + + /* TSPEC identifier uniquely identifying a TSPEC for a STA in a BSS */ + u16 tspec_index; + + /* To lookup station id using the mac address */ + u8 bssid[ETH_ALEN]; +}; + +struct del_ts_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +/* End of TSpec Parameters */ + +/* Start of BLOCK ACK related Parameters */ + +struct wcn36xx_hal_add_ba_session_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index */ + u16 sta_index; + + /* Peer MAC Address */ + u8 mac_addr[ETH_ALEN]; + + /* ADDBA Action Frame dialog token + HAL will not interpret this object */ + u8 dialog_token; + + /* TID for which the BA is being setup + This identifies the TC or TS of interest */ + u8 tid; + + /* 0 - Delayed BA (Not supported) + 1 - Immediate BA */ + u8 policy; + + /* Indicates the number of buffers for this TID (baTID) + NOTE - This is the requested buffer size. When this + is processed by HAL and subsequently by HDD, it is + possible that HDD may change this buffer size. Any + change in the buffer size should be noted by PE and + advertized appropriately in the ADDBA response */ + u16 buffer_size; + + /* BA timeout in TU's 0 means no timeout will occur */ + u16 timeout; + + /* b0..b3 - Fragment Number - Always set to 0 + b4..b15 - Starting Sequence Number of first MSDU + for which this BA is setup */ + u16 ssn; + + /* ADDBA direction + 1 - Originator + 0 - Recipient */ + u8 direction; +} __packed; + +struct wcn36xx_hal_add_ba_session_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* Dialog token */ + u8 dialog_token; + + /* TID for which the BA session has been setup */ + u8 ba_tid; + + /* BA Buffer Size allocated for the current BA session */ + u8 ba_buffer_size; + + u8 ba_session_id; + + /* Reordering Window buffer */ + u8 win_size; + + /* Station Index to id the sta */ + u8 sta_index; + + /* Starting Sequence Number */ + u16 ssn; +} __packed; + +struct wcn36xx_hal_add_ba_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Session Id */ + u8 session_id; + + /* Reorder Window Size */ + u8 win_size; +/* Old FW 1.2.2.4 does not support this*/ +#ifdef FEATURE_ON_CHIP_REORDERING + u8 reordering_done_on_chip; +#endif +} __packed; + +struct wcn36xx_hal_add_ba_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* Dialog token */ + u8 dialog_token; +} __packed; + +struct add_ba_info { + u16 ba_enable:1; + u16 starting_seq_num:12; + u16 reserved:3; +}; + +struct wcn36xx_hal_trigger_ba_rsp_candidate { + u8 sta_addr[ETH_ALEN]; + struct add_ba_info ba_info[STACFG_MAX_TC]; +} __packed; + +struct wcn36xx_hal_trigger_ba_req_candidate { + u8 sta_index; + u8 tid_bitmap; +} __packed; + +struct wcn36xx_hal_trigger_ba_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Session Id */ + u8 session_id; + + /* baCandidateCnt is followed by trigger BA + * Candidate List(tTriggerBaCandidate) + */ + u16 candidate_cnt; + +} __packed; + +struct wcn36xx_hal_trigger_ba_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* TO SUPPORT BT-AMP */ + u8 bssid[ETH_ALEN]; + + /* success or failure */ + u32 status; + + /* baCandidateCnt is followed by trigger BA + * Rsp Candidate List(tTriggerRspBaCandidate) + */ + u16 candidate_cnt; +} __packed; + +struct wcn36xx_hal_del_ba_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index */ + u16 sta_index; + + /* TID for which the BA session is being deleted */ + u8 tid; + + /* DELBA direction + 1 - Originator + 0 - Recipient */ + u8 direction; +} __packed; + +struct wcn36xx_hal_del_ba_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +} __packed; + +struct tsm_stats_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Traffic Id */ + u8 tid; + + u8 bssid[ETH_ALEN]; +}; + +struct tsm_stats_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /*success or failure */ + u32 status; + + /* Uplink Packet Queue delay */ + u16 uplink_pkt_queue_delay; + + /* Uplink Packet Queue delay histogram */ + u16 uplink_pkt_queue_delay_hist[4]; + + /* Uplink Packet Transmit delay */ + u32 uplink_pkt_tx_delay; + + /* Uplink Packet loss */ + u16 uplink_pkt_loss; + + /* Uplink Packet count */ + u16 uplink_pkt_count; + + /* Roaming count */ + u8 roaming_count; + + /* Roaming Delay */ + u16 roaming_delay; +}; + +struct set_key_done_msg { + struct wcn36xx_hal_msg_header header; + + /*bssid of the keys */ + u8 bssidx; + u8 enc_type; +}; + +struct wcn36xx_hal_nv_img_download_req_msg { + /* Note: The length specified in wcn36xx_hal_nv_img_download_req_msg + * messages should be + * header.len = sizeof(wcn36xx_hal_nv_img_download_req_msg) + + * nv_img_buffer_size */ + struct wcn36xx_hal_msg_header header; + + /* Fragment sequence number of the NV Image. Note that NV Image + * might not fit into one message due to size limitation of the SMD + * channel FIFO. UMAC can hence choose to chop the NV blob into + * multiple fragments starting with seqeunce number 0, 1, 2 etc. + * The last fragment MUST be indicated by marking the + * isLastFragment field to 1. Note that all the NV blobs would be + * concatenated together by HAL without any padding bytes in + * between.*/ + u16 frag_number; + + /* Is this the last fragment? When set to 1 it indicates that no + * more fragments will be sent by UMAC and HAL can concatenate all + * the NV blobs rcvd & proceed with the parsing. HAL would generate + * a WCN36XX_HAL_DOWNLOAD_NV_RSP to the WCN36XX_HAL_DOWNLOAD_NV_REQ + * after it receives each fragment */ + u16 last_fragment; + + /* NV Image size (number of bytes) */ + u32 nv_img_buffer_size; + + /* Following the 'nv_img_buffer_size', there should be + * nv_img_buffer_size bytes of NV Image i.e. + * u8[nv_img_buffer_size] */ +} __packed; + +struct wcn36xx_hal_nv_img_download_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Success or Failure. HAL would generate a + * WCN36XX_HAL_DOWNLOAD_NV_RSP after each fragment */ + u32 status; +} __packed; + +struct wcn36xx_hal_nv_store_ind { + /* Note: The length specified in tHalNvStoreInd messages should be + * header.msgLen = sizeof(tHalNvStoreInd) + nvBlobSize */ + struct wcn36xx_hal_msg_header header; + + /* NV Item */ + u32 table_id; + + /* Size of NV Blob */ + u32 nv_blob_size; + + /* Following the 'nvBlobSize', there should be nvBlobSize bytes of + * NV blob i.e. u8[nvBlobSize] */ +}; + +/* End of Block Ack Related Parameters */ + +#define WCN36XX_HAL_CIPHER_SEQ_CTR_SIZE 6 + +/* Definition for MIC failure indication MAC reports this each time a MIC + * failure occures on Rx TKIP packet + */ +struct mic_failure_ind_msg { + struct wcn36xx_hal_msg_header header; + + u8 bssid[ETH_ALEN]; + + /* address used to compute MIC */ + u8 src_addr[ETH_ALEN]; + + /* transmitter address */ + u8 ta_addr[ETH_ALEN]; + + u8 dst_addr[ETH_ALEN]; + + u8 multicast; + + /* first byte of IV */ + u8 iv1; + + /* second byte of IV */ + u8 key_id; + + /* sequence number */ + u8 tsc[WCN36XX_HAL_CIPHER_SEQ_CTR_SIZE]; + + /* receive address */ + u8 rx_addr[ETH_ALEN]; +}; + +struct update_vht_op_mode_req_msg { + struct wcn36xx_hal_msg_header header; + + u16 op_mode; + u16 sta_id; +}; + +struct update_vht_op_mode_params_rsp_msg { + struct wcn36xx_hal_msg_header header; + + u32 status; +}; + +struct update_beacon_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bss_index; + + /* shortPreamble mode. HAL should update all the STA rates when it + * receives this message */ + u8 short_preamble; + + /* short Slot time. */ + u8 short_slot_time; + + /* Beacon Interval */ + u16 beacon_interval; + + /* Protection related */ + u8 lla_coexist; + u8 llb_coexist; + u8 llg_coexist; + u8 ht20_coexist; + u8 lln_non_gf_coexist; + u8 lsig_tx_op_protection_full_support; + u8 rifs_mode; + + u16 param_change_bitmap; +}; + +struct update_beacon_rsp_msg { + struct wcn36xx_hal_msg_header header; + u32 status; +}; + +struct wcn36xx_hal_send_beacon_req_msg { + struct wcn36xx_hal_msg_header header; + + /* length of the template + 6. Only qcom knows why */ + u32 beacon_length6; + + /* length of the template. */ + u32 beacon_length; + + /* Beacon data. */ + u8 beacon[BEACON_TEMPLATE_SIZE - sizeof(u32)]; + + u8 bssid[ETH_ALEN]; + + /* TIM IE offset from the beginning of the template. */ + u32 tim_ie_offset; + + /* P2P IE offset from the begining of the template */ + u16 p2p_ie_offset; +} __packed; + +struct send_beacon_rsp_msg { + struct wcn36xx_hal_msg_header header; + u32 status; +} __packed; + +struct enable_radar_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bssid[ETH_ALEN]; + u8 channel; +}; + +struct enable_radar_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Link Parameters */ + u8 bssid[ETH_ALEN]; + + /* success or failure */ + u32 status; +}; + +struct radar_detect_intr_ind_msg { + struct wcn36xx_hal_msg_header header; + + u8 radar_det_channel; +}; + +struct radar_detect_ind_msg { + struct wcn36xx_hal_msg_header header; + + /* channel number in which the RADAR detected */ + u8 channel_number; + + /* RADAR pulse width in usecond */ + u16 radar_pulse_width; + + /* Number of RADAR pulses */ + u16 num_radar_pulse; +}; + +struct wcn36xx_hal_get_tpc_report_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 sta[ETH_ALEN]; + u8 dialog_token; + u8 txpower; +}; + +struct wcn36xx_hal_get_tpc_report_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_send_probe_resp_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 probe_resp_template[BEACON_TEMPLATE_SIZE]; + u32 probe_resp_template_len; + u32 proxy_probe_req_valid_ie_bmap[8]; + u8 bssid[ETH_ALEN]; +}; + +struct send_probe_resp_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct send_unknown_frame_rx_ind_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_delete_sta_context_ind_msg { + struct wcn36xx_hal_msg_header header; + + u16 aid; + u16 sta_id; + + /* TO SUPPORT BT-AMP */ + u8 bssid[ETH_ALEN]; + + /* HAL copies bssid from the sta table. */ + u8 addr2[ETH_ALEN]; + + /* To unify the keepalive / unknown A2 / tim-based disa */ + u16 reason_code; +} __packed; + +struct indicate_del_sta { + struct wcn36xx_hal_msg_header header; + u8 aid; + u8 sta_index; + u8 bss_index; + u8 reason_code; + u32 status; +}; + +struct bt_amp_event_msg { + struct wcn36xx_hal_msg_header header; + + enum bt_amp_event_type btAmpEventType; +}; + +struct bt_amp_event_rsp { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct tl_hal_flush_ac_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index. originates from HAL */ + u8 sta_id; + + /* TID for which the transmit queue is being flushed */ + u8 tid; +}; + +struct tl_hal_flush_ac_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Station Index. originates from HAL */ + u8 sta_id; + + /* TID for which the transmit queue is being flushed */ + u8 tid; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_enter_imps_req_msg { + struct wcn36xx_hal_msg_header header; +} __packed; + +struct wcn36xx_hal_exit_imps_req_msg { + struct wcn36xx_hal_msg_header header; +} __packed; + +struct wcn36xx_hal_enter_bmps_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bss_index; + + /* TBTT value derived from the last beacon */ +#ifndef BUILD_QWPTTSTATIC + u64 tbtt; +#endif + u8 dtim_count; + + /* DTIM period given to HAL during association may not be valid, if + * association is based on ProbeRsp instead of beacon. */ + u8 dtim_period; + + /* For CCX and 11R Roaming */ + u32 rssi_filter_period; + + u32 num_beacon_per_rssi_average; + u8 rssi_filter_enable; +} __packed; + +struct wcn36xx_hal_exit_bmps_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 send_data_null; + u8 bss_index; +} __packed; + +struct wcn36xx_hal_missed_beacon_ind_msg { + struct wcn36xx_hal_msg_header header; + + u8 bss_index; +} __packed; + +/* Beacon Filtering data structures */ + +struct beacon_filter_ie { + u8 element_id; + u8 check_ie_presence; + u8 offset; + u8 value; + u8 bitmask; + u8 ref; +} __packed; + +#define WCN36XX_FILTER_CAPABILITY_MASK 0x73cf +#define WCN36XX_FILTER_IE_DS_CHANNEL_MASK 0x00 +#define WCN36XX_FILTER_IE_ERP_FILTER_MASK 0xF8 +#define WCN36XX_FILTER_IE_EDCA_FILTER_MASK 0xF0 +#define WCN36XX_FILTER_IE_QOS_FILTER_MASK 0xF0 +#define WCN36XX_FILTER_IE_CHANNEL_SWITCH_MASK 0x00 +#define WCN36XX_FILTER_IE_HT_BYTE0_FILTER_MASK 0x00 +#define WCN36XX_FILTER_IE_HT_BYTE1_FILTER_MASK 0xF8 +#define WCN36XX_FILTER_IE_HT_BYTE2_FILTER_MASK 0xEB +#define WCN36XX_FILTER_IE_HT_BYTE5_FILTER_MASK 0xFD +#define WCN36XX_FILTER_IE_PWR_CONSTRAINT_MASK 0x00 +#define WCN36XX_FILTER_IE_OPMODE_NOTIF_MASK 0x00 +#define WCN36XX_FILTER_IE_VHTOP_CHWIDTH_MASK 0xFC +#define WCN36XX_FILTER_IE_RSN_MASK 0x00 +#define WCN36XX_FILTER_IE_VENDOR_MASK 0x00 + +/* The above structure would be followed by multiple of below mentioned + * structure + */ + +struct wcn36xx_hal_add_bcn_filter_req_msg { + struct wcn36xx_hal_msg_header header; + + u16 capability_info; + u16 capability_mask; + u16 beacon_interval; + u16 ie_num; + u8 bss_index; + u8 reserved; +} __packed; + +struct wcn36xx_hal_rem_bcn_filter_req { + struct wcn36xx_hal_msg_header header; + + u8 ie_Count; + u8 rem_ie_id[1]; +} __packed; + +#define WCN36XX_HAL_IPV4_ARP_REPLY_OFFLOAD 0 +#define WCN36XX_HAL_IPV6_NEIGHBOR_DISCOVERY_OFFLOAD 1 +#define WCN36XX_HAL_IPV6_NS_OFFLOAD 2 +#define WCN36XX_HAL_IPV6_ADDR_LEN 16 +#define WCN36XX_HAL_OFFLOAD_DISABLE 0 +#define WCN36XX_HAL_OFFLOAD_ENABLE 1 +#define WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE 0x2 +#define WCN36XX_HAL_OFFLOAD_MCAST_FILTER_ENABLE 0x4 +#define WCN36XX_HAL_OFFLOAD_NS_AND_MCAST_FILTER_ENABLE \ + (WCN36XX_HAL_OFFLOAD_ENABLE | WCN36XX_HAL_OFFLOAD_MCAST_FILTER_ENABLE) +#define WCN36XX_HAL_OFFLOAD_ARP_AND_BCAST_FILTER_ENABLE \ + (WCN36XX_HAL_OFFLOAD_ENABLE | WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE) +#define WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX 0x02 + +struct wcn36xx_hal_ns_offload_params { + u8 src_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; + u8 self_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; + + /* Only support 2 possible Network Advertisement IPv6 address */ + u8 target_ipv6_addr1[WCN36XX_HAL_IPV6_ADDR_LEN]; + u8 target_ipv6_addr2[WCN36XX_HAL_IPV6_ADDR_LEN]; + + u8 self_addr[ETH_ALEN]; + u8 src_ipv6_addr_valid:1; + u8 target_ipv6_addr1_valid:1; + u8 target_ipv6_addr2_valid:1; + u8 reserved1:5; + + /* make it DWORD aligned */ + u8 reserved2; + + /* slot index for this offload */ + u32 slot_index; + u8 bss_index; +} __packed; + +struct wcn36xx_hal_host_offload_req { + u8 offload_type; + + /* enable or disable */ + u8 enable; + + union { + u8 host_ipv4_addr[4]; + u8 host_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN]; + } u; +} __packed; + +struct wcn36xx_hal_host_offload_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_host_offload_req host_offload_params; + struct wcn36xx_hal_ns_offload_params ns_offload_params; +} __packed; + +/* Packet Types. */ +#define WCN36XX_HAL_KEEP_ALIVE_NULL_PKT 1 +#define WCN36XX_HAL_KEEP_ALIVE_UNSOLICIT_ARP_RSP 2 + +/* Enable or disable keep alive */ +#define WCN36XX_HAL_KEEP_ALIVE_DISABLE 0 +#define WCN36XX_HAL_KEEP_ALIVE_ENABLE 1 +#define WCN36XX_KEEP_ALIVE_TIME_PERIOD 30 /* unit: s */ + +/* Keep Alive request. */ +struct wcn36xx_hal_keep_alive_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 packet_type; + u32 time_period; + u8 host_ipv4_addr[WCN36XX_HAL_IPV4_ADDR_LEN]; + u8 dest_ipv4_addr[WCN36XX_HAL_IPV4_ADDR_LEN]; + u8 dest_addr[ETH_ALEN]; + u8 bss_index; +} __packed; + +struct wcn36xx_hal_rssi_threshold_req_msg { + struct wcn36xx_hal_msg_header header; + + s8 threshold1:8; + s8 threshold2:8; + s8 threshold3:8; + u8 thres1_pos_notify:1; + u8 thres1_neg_notify:1; + u8 thres2_pos_notify:1; + u8 thres2_neg_notify:1; + u8 thres3_pos_notify:1; + u8 thres3_neg_notify:1; + u8 reserved10:2; +}; + +struct wcn36xx_hal_enter_uapsd_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bk_delivery:1; + u8 be_delivery:1; + u8 vi_delivery:1; + u8 vo_delivery:1; + u8 bk_trigger:1; + u8 be_trigger:1; + u8 vi_trigger:1; + u8 vo_trigger:1; + u8 bss_index; +}; + +struct wcn36xx_hal_exit_uapsd_req_msg { + struct wcn36xx_hal_msg_header header; + u8 bss_index; +}; + +#define WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE 128 +#define WCN36XX_HAL_WOWL_BCAST_MAX_NUM_PATTERNS 16 + +struct wcn36xx_hal_wowl_add_bcast_ptrn_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Pattern ID */ + u8 id; + + /* Pattern byte offset from beginning of the 802.11 packet to start + * of the wake-up pattern */ + u8 byte_Offset; + + /* Non-Zero Pattern size */ + u8 size; + + /* Pattern */ + u8 pattern[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; + + /* Non-zero pattern mask size */ + u8 mask_size; + + /* Pattern mask */ + u8 mask[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; + + /* Extra pattern */ + u8 extra[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; + + /* Extra pattern mask */ + u8 mask_extra[WCN36XX_HAL_WOWL_BCAST_PATTERN_MAX_SIZE]; + + u8 bss_index; +}; + +struct wcn36xx_hal_wow_del_bcast_ptrn_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Pattern ID of the wakeup pattern to be deleted */ + u8 id; + u8 bss_index; +}; + +struct wcn36xx_hal_wowl_enter_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Enables/disables magic packet filtering */ + u8 magic_packet_enable; + + /* Magic pattern */ + u8 magic_pattern[ETH_ALEN]; + + /* Enables/disables packet pattern filtering in firmware. Enabling + * this flag enables broadcast pattern matching in Firmware. If + * unicast pattern matching is also desired, + * ucUcastPatternFilteringEnable flag must be set tot true as well + */ + u8 pattern_filtering_enable; + + /* Enables/disables unicast packet pattern filtering. This flag + * specifies whether we want to do pattern match on unicast packets + * as well and not just broadcast packets. This flag has no effect + * if the ucPatternFilteringEnable (main controlling flag) is set + * to false + */ + u8 ucast_pattern_filtering_enable; + + /* This configuration is valid only when magicPktEnable=1. It + * requests hardware to wake up when it receives the Channel Switch + * Action Frame. + */ + u8 wow_channel_switch_receive; + + /* This configuration is valid only when magicPktEnable=1. It + * requests hardware to wake up when it receives the + * Deauthentication Frame. + */ + u8 wow_deauth_receive; + + /* This configuration is valid only when magicPktEnable=1. It + * requests hardware to wake up when it receives the Disassociation + * Frame. + */ + u8 wow_disassoc_receive; + + /* This configuration is valid only when magicPktEnable=1. It + * requests hardware to wake up when it has missed consecutive + * beacons. This is a hardware register configuration (NOT a + * firmware configuration). + */ + u8 wow_max_missed_beacons; + + /* This configuration is valid only when magicPktEnable=1. This is + * a timeout value in units of microsec. It requests hardware to + * unconditionally wake up after it has stayed in WoWLAN mode for + * some time. Set 0 to disable this feature. + */ + u8 wow_max_sleep; + + /* This configuration directs the WoW packet filtering to look for + * EAP-ID requests embedded in EAPOL frames and use this as a wake + * source. + */ + u8 wow_eap_id_request_enable; + + /* This configuration directs the WoW packet filtering to look for + * EAPOL-4WAY requests and use this as a wake source. + */ + u8 wow_eapol_4way_enable; + + /* This configuration allows a host wakeup on an network scan + * offload match. + */ + u8 wow_net_scan_offload_match; + + /* This configuration allows a host wakeup on any GTK rekeying + * error. + */ + u8 wow_gtk_rekey_error; + + /* This configuration allows a host wakeup on BSS connection loss. + */ + u8 wow_bss_connection_loss; + + u8 bss_index; +}; + +struct wcn36xx_hal_wowl_exit_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bss_index; +}; + +struct wcn36xx_hal_get_rssi_req_msg { + struct wcn36xx_hal_msg_header header; +}; + +struct wcn36xx_hal_get_roam_rssi_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Valid STA Idx for per STA stats request */ + u32 sta_id; +}; + +struct wcn36xx_hal_set_uapsd_ac_params_req_msg { + struct wcn36xx_hal_msg_header header; + + /* STA index */ + u8 sta_idx; + + /* Access Category */ + u8 ac; + + /* User Priority */ + u8 up; + + /* Service Interval */ + u32 service_interval; + + /* Suspend Interval */ + u32 suspend_interval; + + /* Delay Interval */ + u32 delay_interval; +}; + +struct wcn36xx_hal_configure_rxp_filter_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 set_mcst_bcst_filter_setting; + u8 set_mcst_bcst_filter; +}; + +struct wcn36xx_hal_enter_imps_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_exit_imps_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_enter_bmps_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +} __packed; + +struct wcn36xx_hal_exit_bmps_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +} __packed; + +struct wcn36xx_hal_enter_uapsd_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +}; + +struct wcn36xx_hal_exit_uapsd_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +}; + +struct wcn36xx_hal_rssi_notification_ind_msg { + struct wcn36xx_hal_msg_header header; + + u32 rssi_thres1_pos_cross:1; + u32 rssi_thres1_neg_cross:1; + u32 rssi_thres2_pos_cross:1; + u32 rssi_thres2_neg_cross:1; + u32 rssi_thres3_pos_cross:1; + u32 rssi_thres3_neg_cross:1; + u32 avg_rssi:8; + u32 reserved:18; + +}; + +struct wcn36xx_hal_get_rssio_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + s8 rssi; + +}; + +struct wcn36xx_hal_get_roam_rssi_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 sta_id; + s8 rssi; +}; + +struct wcn36xx_hal_wowl_enter_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + u8 bss_index; +}; + +struct wcn36xx_hal_wowl_exit_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + u8 bss_index; +}; + +struct wcn36xx_hal_add_bcn_filter_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_rem_bcn_filter_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_add_wowl_bcast_ptrn_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + u8 bss_index; +}; + +struct wcn36xx_hal_del_wowl_bcast_ptrn_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + u8 bss_index; +}; + +struct wcn36xx_hal_host_offload_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_keep_alive_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_set_rssi_thresh_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_set_uapsd_ac_params_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_configure_rxp_filter_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct set_max_tx_pwr_req { + struct wcn36xx_hal_msg_header header; + + /* BSSID is needed to identify which session issued this request. + * As the request has power constraints, this should be applied + * only to that session */ + u8 bssid[ETH_ALEN]; + + u8 self_addr[ETH_ALEN]; + + /* In request, power == MaxTx power to be used. */ + u8 power; +}; + +struct set_max_tx_pwr_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* power == tx power used for management frames */ + u8 power; + + /* success or failure */ + u32 status; +}; + +struct set_tx_pwr_req_msg { + struct wcn36xx_hal_msg_header header; + + /* TX Power in milli watts */ + u32 tx_power; + + u8 bss_index; +}; + +struct set_tx_pwr_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct get_tx_pwr_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 sta_id; +}; + +struct get_tx_pwr_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* TX Power in milli watts */ + u32 tx_power; +}; + +struct set_p2p_gonoa_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 opp_ps; + u32 ct_window; + u8 count; + u32 duration; + u32 interval; + u32 single_noa_duration; + u8 ps_selection; +}; + +struct set_p2p_gonoa_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_add_sta_self_req { + struct wcn36xx_hal_msg_header header; + + u8 self_addr[ETH_ALEN]; + u32 status; +} __packed; + +struct wcn36xx_hal_add_sta_self_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* Self STA Index */ + u8 self_sta_index; + + /* DPU Index (IGTK, PTK, GTK all same) */ + u8 dpu_index; + + /* DPU Signature */ + u8 dpu_signature; +} __packed; + +struct wcn36xx_hal_del_sta_self_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 self_addr[ETH_ALEN]; +} __packed; + +struct wcn36xx_hal_del_sta_self_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /*success or failure */ + u32 status; + + u8 self_addr[ETH_ALEN]; +} __packed; + +struct aggr_add_ts_req { + struct wcn36xx_hal_msg_header header; + + /* Station Index */ + u16 sta_idx; + + /* TSPEC handler uniquely identifying a TSPEC for a STA in a BSS. + * This will carry the bitmap with the bit positions representing + * different AC.s */ + u16 tspec_index; + + /* Tspec info per AC To program TPE with required parameters */ + struct wcn36xx_hal_tspec_ie tspec[WCN36XX_HAL_MAX_AC]; + + /* U-APSD Flags: 1b per AC. Encoded as follows: + b7 b6 b5 b4 b3 b2 b1 b0 = + X X X X BE BK VI VO */ + u8 uapsd; + + /* These parameters are for all the access categories */ + + /* Service Interval */ + u32 service_interval[WCN36XX_HAL_MAX_AC]; + + /* Suspend Interval */ + u32 suspend_interval[WCN36XX_HAL_MAX_AC]; + + /* Delay Interval */ + u32 delay_interval[WCN36XX_HAL_MAX_AC]; +}; + +struct aggr_add_ts_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status0; + + /* FIXME PRIMA for future use for 11R */ + u32 status1; +}; + +struct wcn36xx_hal_configure_apps_cpu_wakeup_state_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 is_apps_cpu_awake; +}; + +struct wcn36xx_hal_configure_apps_cpu_wakeup_state_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_dump_cmd_req_msg { + struct wcn36xx_hal_msg_header header; + + u32 arg1; + u32 arg2; + u32 arg3; + u32 arg4; + u32 arg5; +} __packed; + +struct wcn36xx_hal_dump_cmd_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* Length of the responce message */ + u32 rsp_length; + + /* FIXME: Currently considering the responce will be less than + * 100bytes */ + u8 rsp_buffer[DUMPCMD_RSP_BUFFER]; +} __packed; + +#define WLAN_COEX_IND_DATA_SIZE (4) +#define WLAN_COEX_IND_TYPE_DISABLE_HB_MONITOR (0) +#define WLAN_COEX_IND_TYPE_ENABLE_HB_MONITOR (1) + +struct coex_ind_msg { + struct wcn36xx_hal_msg_header header; + + /* Coex Indication Type */ + u32 type; + + /* Coex Indication Data */ + u32 data[WLAN_COEX_IND_DATA_SIZE]; +}; + +struct wcn36xx_hal_tx_compl_ind_msg { + struct wcn36xx_hal_msg_header header; + + /* Tx Complete Indication Success or Failure */ + u32 status; +}; + +struct wcn36xx_hal_wlan_host_suspend_ind_msg { + struct wcn36xx_hal_msg_header header; + + u32 configured_mcst_bcst_filter_setting; + u32 active_session_count; +}; + +struct wcn36xx_hal_wlan_exclude_unencrpted_ind_msg { + struct wcn36xx_hal_msg_header header; + + u8 dot11_exclude_unencrypted; + u8 bssid[ETH_ALEN]; +}; + +struct noa_attr_ind_msg { + struct wcn36xx_hal_msg_header header; + + u8 index; + u8 opp_ps_flag; + u16 ctwin; + + u16 noa1_interval_count; + u16 bss_index; + u32 noa1_duration; + u32 noa1_interval; + u32 noa1_starttime; + + u16 noa2_interval_count; + u16 reserved2; + u32 noa2_duration; + u32 noa2_interval; + u32 noa2_start_time; + + u32 status; +}; + +struct noa_start_ind_msg { + struct wcn36xx_hal_msg_header header; + + u32 status; + u32 bss_index; +}; + +struct wcn36xx_hal_wlan_host_resume_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 configured_mcst_bcst_filter_setting; +}; + +struct wcn36xx_hal_host_resume_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +struct wcn36xx_hal_del_ba_ind_msg { + struct wcn36xx_hal_msg_header header; + + u16 sta_idx; + + /* Peer MAC Address, whose BA session has timed out */ + u8 peer_addr[ETH_ALEN]; + + /* TID for which a BA session timeout is being triggered */ + u8 ba_tid; + + /* DELBA direction + * 1 - Originator + * 0 - Recipient + */ + u8 direction; + + u32 reason_code; + + /* TO SUPPORT BT-AMP */ + u8 bssid[ETH_ALEN]; +}; + +/* PNO Messages */ + +/* Max number of channels that a network can be found on */ +#define WCN36XX_HAL_PNO_MAX_NETW_CHANNELS 26 + +/* Max number of channels that a network can be found on */ +#define WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX 60 + +/* Maximum numbers of networks supported by PNO */ +#define WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS 16 + +/* The number of scan time intervals that can be programmed into PNO */ +#define WCN36XX_HAL_PNO_MAX_SCAN_TIMERS 10 + +/* Maximum size of the probe template */ +#define WCN36XX_HAL_PNO_MAX_PROBE_SIZE 450 + +/* Type of PNO enabling: + * + * Immediate - scanning will start immediately and PNO procedure will be + * repeated based on timer + * + * Suspend - scanning will start at suspend + * + * Resume - scanning will start on system resume + */ +enum pno_mode { + PNO_MODE_IMMEDIATE, + PNO_MODE_ON_SUSPEND, + PNO_MODE_ON_RESUME, + PNO_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* Authentication type */ +enum auth_type { + AUTH_TYPE_ANY = 0, + AUTH_TYPE_OPEN_SYSTEM = 1, + + /* Upper layer authentication types */ + AUTH_TYPE_WPA = 2, + AUTH_TYPE_WPA_PSK = 3, + + AUTH_TYPE_RSN = 4, + AUTH_TYPE_RSN_PSK = 5, + AUTH_TYPE_FT_RSN = 6, + AUTH_TYPE_FT_RSN_PSK = 7, + AUTH_TYPE_WAPI_WAI_CERTIFICATE = 8, + AUTH_TYPE_WAPI_WAI_PSK = 9, + + AUTH_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* Encryption type */ +enum ed_type { + ED_ANY = 0, + ED_NONE = 1, + ED_WEP = 2, + ED_TKIP = 3, + ED_CCMP = 4, + ED_WPI = 5, + + ED_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* SSID broadcast type */ +enum ssid_bcast_type { + BCAST_UNKNOWN = 0, + BCAST_NORMAL = 1, + BCAST_HIDDEN = 2, + + BCAST_TYPE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE +}; + +/* The network description for which PNO will have to look for */ +struct network_type { + /* SSID of the BSS */ + struct wcn36xx_hal_mac_ssid ssid; + + /* Authentication type for the network */ + enum auth_type authentication; + + /* Encryption type for the network */ + enum ed_type encryption; + + /* Indicate the channel on which the Network can be found 0 - if + * all channels */ + u8 channel_count; + u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS]; + + /* Indicates the RSSI threshold for the network to be considered */ + u8 rssi_threshold; +}; + +struct scan_timer { + /* How much it should wait */ + u32 value; + + /* How many times it should repeat that wait value 0 - keep using + * this timer until PNO is disabled */ + u32 repeat; + + /* e.g: 2 3 4 0 - it will wait 2s between consecutive scans for 3 + * times - after that it will wait 4s between consecutive scans + * until disabled */ +}; + +/* The network parameters to be sent to the PNO algorithm */ +struct scan_timers_type { + /* set to 0 if you wish for PNO to use its default telescopic timer */ + u8 count; + + /* A set value represents the amount of time that PNO will wait + * between two consecutive scan procedures If the desired is for a + * uniform timer that fires always at the exact same interval - one + * single value is to be set If there is a desire for a more + * complex - telescopic like timer multiple values can be set - + * once PNO reaches the end of the array it will continue scanning + * at intervals presented by the last value */ + struct scan_timer values[WCN36XX_HAL_PNO_MAX_SCAN_TIMERS]; +}; + +/* Preferred network list request */ +struct set_pref_netw_list_req { + struct wcn36xx_hal_msg_header header; + + /* Enable PNO */ + u32 enable; + + /* Immediate, On Suspend, On Resume */ + enum pno_mode mode; + + /* Number of networks sent for PNO */ + u32 networks_count; + + /* The networks that PNO needs to look for */ + struct network_type networks[WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS]; + + /* The scan timers required for PNO */ + struct scan_timers_type scan_timers; + + /* Probe template for 2.4GHz band */ + u16 band_24g_probe_size; + u8 band_24g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; + + /* Probe template for 5GHz band */ + u16 band_5g_probe_size; + u8 band_5g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; +}; + +/* The network description for which PNO will have to look for */ +struct network_type_new { + /* SSID of the BSS */ + struct wcn36xx_hal_mac_ssid ssid; + + /* Authentication type for the network */ + enum auth_type authentication; + + /* Encryption type for the network */ + enum ed_type encryption; + + /* SSID broadcast type, normal, hidden or unknown */ + enum ssid_bcast_type bcast_network_type; + + /* Indicate the channel on which the Network can be found 0 - if + * all channels */ + u8 channel_count; + u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS]; + + /* Indicates the RSSI threshold for the network to be considered */ + u8 rssi_threshold; +}; + +/* Preferred network list request new */ +struct set_pref_netw_list_req_new { + struct wcn36xx_hal_msg_header header; + + /* Enable PNO */ + u32 enable; + + /* Immediate, On Suspend, On Resume */ + enum pno_mode mode; + + /* Number of networks sent for PNO */ + u32 networks_count; + + /* The networks that PNO needs to look for */ + struct network_type_new networks[WCN36XX_HAL_PNO_MAX_SUPP_NETWORKS]; + + /* The scan timers required for PNO */ + struct scan_timers_type scan_timers; + + /* Probe template for 2.4GHz band */ + u16 band_24g_probe_size; + u8 band_24g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; + + /* Probe template for 5GHz band */ + u16 band_5g_probe_size; + u8 band_5g_probe_template[WCN36XX_HAL_PNO_MAX_PROBE_SIZE]; +}; + +/* Preferred network list response */ +struct set_pref_netw_list_resp { + struct wcn36xx_hal_msg_header header; + + /* status of the request - just to indicate that PNO has + * acknowledged the request and will start scanning */ + u32 status; +}; + +/* Preferred network found indication */ +struct pref_netw_found_ind { + + struct wcn36xx_hal_msg_header header; + + /* Network that was found with the highest RSSI */ + struct wcn36xx_hal_mac_ssid ssid; + + /* Indicates the RSSI */ + u8 rssi; +}; + +/* RSSI Filter request */ +struct set_rssi_filter_req { + struct wcn36xx_hal_msg_header header; + + /* RSSI Threshold */ + u8 rssi_threshold; +}; + +/* Set RSSI filter resp */ +struct set_rssi_filter_resp { + struct wcn36xx_hal_msg_header header; + + /* status of the request */ + u32 status; +}; + +/* Update scan params - sent from host to PNO to be used during PNO + * scanningx */ +struct wcn36xx_hal_update_scan_params_req { + + struct wcn36xx_hal_msg_header header; + + /* Host setting for 11d */ + u8 dot11d_enabled; + + /* Lets PNO know that host has determined the regulatory domain */ + u8 dot11d_resolved; + + /* Channels on which PNO is allowed to scan */ + u8 channel_count; + u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS]; + + /* Minimum channel time */ + u16 active_min_ch_time; + + /* Maximum channel time */ + u16 active_max_ch_time; + + /* Minimum channel time */ + u16 passive_min_ch_time; + + /* Maximum channel time */ + u16 passive_max_ch_time; + + /* Cb State */ + enum phy_chan_bond_state state; +} __packed; + +/* Update scan params - sent from host to PNO to be used during PNO + * scanningx */ +struct wcn36xx_hal_update_scan_params_req_ex { + + struct wcn36xx_hal_msg_header header; + + /* Host setting for 11d */ + u8 dot11d_enabled; + + /* Lets PNO know that host has determined the regulatory domain */ + u8 dot11d_resolved; + + /* Channels on which PNO is allowed to scan */ + u8 channel_count; + u8 channels[WCN36XX_HAL_PNO_MAX_NETW_CHANNELS_EX]; + + /* Minimum channel time */ + u16 active_min_ch_time; + + /* Maximum channel time */ + u16 active_max_ch_time; + + /* Minimum channel time */ + u16 passive_min_ch_time; + + /* Maximum channel time */ + u16 passive_max_ch_time; + + /* Cb State */ + enum phy_chan_bond_state state; +} __packed; + +/* Update scan params - sent from host to PNO to be used during PNO + * scanningx */ +struct wcn36xx_hal_update_scan_params_resp { + + struct wcn36xx_hal_msg_header header; + + /* status of the request */ + u32 status; +} __packed; + +struct wcn36xx_hal_set_tx_per_tracking_req_msg { + struct wcn36xx_hal_msg_header header; + + /* 0: disable, 1:enable */ + u8 tx_per_tracking_enable; + + /* Check period, unit is sec. */ + u8 tx_per_tracking_period; + + /* (Fail TX packet)/(Total TX packet) ratio, the unit is 10%. */ + u8 tx_per_tracking_ratio; + + /* A watermark of check number, once the tx packet exceed this + * number, we do the check, default is 5 */ + u32 tx_per_tracking_watermark; +}; + +struct wcn36xx_hal_set_tx_per_tracking_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + +}; + +struct tx_per_hit_ind_msg { + struct wcn36xx_hal_msg_header header; +}; + +/* Packet Filtering Definitions Begin */ +#define WCN36XX_HAL_PROTOCOL_DATA_LEN 8 +#define WCN36XX_HAL_MAX_NUM_MULTICAST_ADDRESS 240 +#define WCN36XX_HAL_MAX_NUM_FILTERS 20 +#define WCN36XX_HAL_MAX_CMP_PER_FILTER 10 + +enum wcn36xx_hal_receive_packet_filter_type { + HAL_RCV_FILTER_TYPE_INVALID, + HAL_RCV_FILTER_TYPE_FILTER_PKT, + HAL_RCV_FILTER_TYPE_BUFFER_PKT, + HAL_RCV_FILTER_TYPE_MAX_ENUM_SIZE +}; + +enum wcn36xx_hal_rcv_pkt_flt_protocol_type { + HAL_FILTER_PROTO_TYPE_INVALID, + HAL_FILTER_PROTO_TYPE_MAC, + HAL_FILTER_PROTO_TYPE_ARP, + HAL_FILTER_PROTO_TYPE_IPV4, + HAL_FILTER_PROTO_TYPE_IPV6, + HAL_FILTER_PROTO_TYPE_UDP, + HAL_FILTER_PROTO_TYPE_MAX +}; + +enum wcn36xx_hal_rcv_pkt_flt_cmp_flag_type { + HAL_FILTER_CMP_TYPE_INVALID, + HAL_FILTER_CMP_TYPE_EQUAL, + HAL_FILTER_CMP_TYPE_MASK_EQUAL, + HAL_FILTER_CMP_TYPE_NOT_EQUAL, + HAL_FILTER_CMP_TYPE_MAX +}; + +struct wcn36xx_hal_rcv_pkt_filter_params { + u8 protocol_layer; + u8 cmp_flag; + + /* Length of the data to compare */ + u16 data_length; + + /* from start of the respective frame header */ + u8 data_offset; + + /* Reserved field */ + u8 reserved; + + /* Data to compare */ + u8 compare_data[WCN36XX_HAL_PROTOCOL_DATA_LEN]; + + /* Mask to be applied on the received packet data before compare */ + u8 data_mask[WCN36XX_HAL_PROTOCOL_DATA_LEN]; +}; + +struct wcn36xx_hal_sessionized_rcv_pkt_filter_cfg_type { + u8 id; + u8 type; + u8 params_count; + u32 coleasce_time; + u8 bss_index; + struct wcn36xx_hal_rcv_pkt_filter_params params[1]; +}; + +struct wcn36xx_hal_set_rcv_pkt_filter_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 id; + u8 type; + u8 params_count; + u32 coalesce_time; + struct wcn36xx_hal_rcv_pkt_filter_params params[1]; +}; + +struct wcn36xx_hal_rcv_flt_mc_addr_list_type { + /* from start of the respective frame header */ + u8 data_offset; + + u32 mc_addr_count; + u8 mc_addr[WCN36XX_HAL_MAX_NUM_MULTICAST_ADDRESS][ETH_ALEN]; + u8 bss_index; +} __packed; + +struct wcn36xx_hal_set_pkt_filter_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +}; + +struct wcn36xx_hal_rcv_flt_pkt_match_cnt_req_msg { + struct wcn36xx_hal_msg_header header; + + u8 bss_index; +}; + +struct wcn36xx_hal_rcv_flt_pkt_match_cnt { + u8 id; + u32 match_cnt; +}; + +struct wcn36xx_hal_rcv_flt_pkt_match_cnt_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* Success or Failure */ + u32 status; + + u32 match_count; + struct wcn36xx_hal_rcv_flt_pkt_match_cnt + matches[WCN36XX_HAL_MAX_NUM_FILTERS]; + u8 bss_index; +}; + +struct wcn36xx_hal_rcv_flt_pkt_clear_param { + /* only valid for response message */ + u32 status; + u8 id; + u8 bss_index; +}; + +struct wcn36xx_hal_rcv_flt_pkt_clear_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_rcv_flt_pkt_clear_param param; +}; + +struct wcn36xx_hal_rcv_flt_pkt_clear_rsp_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_rcv_flt_pkt_clear_param param; +}; + +struct wcn36xx_hal_rcv_flt_pkt_set_mc_list_req_msg { + struct wcn36xx_hal_msg_header header; + struct wcn36xx_hal_rcv_flt_mc_addr_list_type mc_addr_list; +} __packed; + +struct wcn36xx_hal_rcv_flt_pkt_set_mc_list_rsp_msg { + struct wcn36xx_hal_msg_header header; + u32 status; + u8 bss_index; +}; + +/* Packet Filtering Definitions End */ + +struct wcn36xx_hal_set_power_params_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Ignore DTIM */ + u32 ignore_dtim; + + /* DTIM Period */ + u32 dtim_period; + + /* Listen Interval */ + u32 listen_interval; + + /* Broadcast Multicast Filter */ + u32 bcast_mcast_filter; + + /* Beacon Early Termination */ + u32 enable_bet; + + /* Beacon Early Termination Interval */ + u32 bet_interval; +} __packed; + +struct wcn36xx_hal_set_power_params_resp { + + struct wcn36xx_hal_msg_header header; + + /* status of the request */ + u32 status; +} __packed; + +#define WCN36XX_HAL_CAPS_SIZE 4 + +struct wcn36xx_hal_feat_caps_msg { + + struct wcn36xx_hal_msg_header header; + + u32 feat_caps[WCN36XX_HAL_CAPS_SIZE]; +} __packed; + +/* status codes to help debug rekey failures */ +enum gtk_rekey_status { + WCN36XX_HAL_GTK_REKEY_STATUS_SUCCESS = 0, + + /* rekey detected, but not handled */ + WCN36XX_HAL_GTK_REKEY_STATUS_NOT_HANDLED = 1, + + /* MIC check error on M1 */ + WCN36XX_HAL_GTK_REKEY_STATUS_MIC_ERROR = 2, + + /* decryption error on M1 */ + WCN36XX_HAL_GTK_REKEY_STATUS_DECRYPT_ERROR = 3, + + /* M1 replay detected */ + WCN36XX_HAL_GTK_REKEY_STATUS_REPLAY_ERROR = 4, + + /* missing GTK key descriptor in M1 */ + WCN36XX_HAL_GTK_REKEY_STATUS_MISSING_KDE = 5, + + /* missing iGTK key descriptor in M1 */ + WCN36XX_HAL_GTK_REKEY_STATUS_MISSING_IGTK_KDE = 6, + + /* key installation error */ + WCN36XX_HAL_GTK_REKEY_STATUS_INSTALL_ERROR = 7, + + /* iGTK key installation error */ + WCN36XX_HAL_GTK_REKEY_STATUS_IGTK_INSTALL_ERROR = 8, + + /* GTK rekey M2 response TX error */ + WCN36XX_HAL_GTK_REKEY_STATUS_RESP_TX_ERROR = 9, + + /* non-specific general error */ + WCN36XX_HAL_GTK_REKEY_STATUS_GEN_ERROR = 255 +}; + +/* wake reason types */ +enum wake_reason_type { + WCN36XX_HAL_WAKE_REASON_NONE = 0, + + /* magic packet match */ + WCN36XX_HAL_WAKE_REASON_MAGIC_PACKET = 1, + + /* host defined pattern match */ + WCN36XX_HAL_WAKE_REASON_PATTERN_MATCH = 2, + + /* EAP-ID frame detected */ + WCN36XX_HAL_WAKE_REASON_EAPID_PACKET = 3, + + /* start of EAPOL 4-way handshake detected */ + WCN36XX_HAL_WAKE_REASON_EAPOL4WAY_PACKET = 4, + + /* network scan offload match */ + WCN36XX_HAL_WAKE_REASON_NETSCAN_OFFL_MATCH = 5, + + /* GTK rekey status wakeup (see status) */ + WCN36XX_HAL_WAKE_REASON_GTK_REKEY_STATUS = 6, + + /* BSS connection lost */ + WCN36XX_HAL_WAKE_REASON_BSS_CONN_LOST = 7, +}; + +/* + Wake Packet which is saved at tWakeReasonParams.DataStart + This data is sent for any wake reasons that involve a packet-based wakeup : + + WCN36XX_HAL_WAKE_REASON_TYPE_MAGIC_PACKET + WCN36XX_HAL_WAKE_REASON_TYPE_PATTERN_MATCH + WCN36XX_HAL_WAKE_REASON_TYPE_EAPID_PACKET + WCN36XX_HAL_WAKE_REASON_TYPE_EAPOL4WAY_PACKET + WCN36XX_HAL_WAKE_REASON_TYPE_GTK_REKEY_STATUS + + The information is provided to the host for auditing and debug purposes + +*/ + +/* Wake reason indication */ +struct wcn36xx_hal_wake_reason_ind { + struct wcn36xx_hal_msg_header header; + + /* see tWakeReasonType */ + u32 reason; + + /* argument specific to the reason type */ + u32 reason_arg; + + /* length of optional data stored in this message, in case HAL + * truncates the data (i.e. data packets) this length will be less + * than the actual length */ + u32 stored_data_len; + + /* actual length of data */ + u32 actual_data_len; + + /* variable length start of data (length == storedDataLen) see + * specific wake type */ + u8 data_start[1]; + + u32 bss_index:8; + u32 reserved:24; +}; + +#define WCN36XX_HAL_GTK_KEK_BYTES 16 +#define WCN36XX_HAL_GTK_KCK_BYTES 16 + +#define WCN36XX_HAL_GTK_OFFLOAD_FLAGS_DISABLE (1 << 0) + +#define GTK_SET_BSS_KEY_TAG 0x1234AA55 + +struct wcn36xx_hal_gtk_offload_req_msg { + struct wcn36xx_hal_msg_header header; + + /* optional flags */ + u32 flags; + + /* Key confirmation key */ + u8 kck[WCN36XX_HAL_GTK_KCK_BYTES]; + + /* key encryption key */ + u8 kek[WCN36XX_HAL_GTK_KEK_BYTES]; + + /* replay counter */ + u64 key_replay_counter; + + u8 bss_index; +} __packed; + +struct wcn36xx_hal_gtk_offload_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + u8 bss_index; +}; + +struct wcn36xx_hal_gtk_offload_get_info_req_msg { + struct wcn36xx_hal_msg_header header; + u8 bss_index; +} __packed; + +struct wcn36xx_hal_gtk_offload_get_info_rsp_msg { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; + + /* last rekey status when the rekey was offloaded */ + u32 last_rekey_status; + + /* current replay counter value */ + u64 key_replay_counter; + + /* total rekey attempts */ + u32 total_rekey_count; + + /* successful GTK rekeys */ + u32 gtk_rekey_count; + + /* successful iGTK rekeys */ + u32 igtk_rekey_count; + + u8 bss_index; +} __packed; + +struct dhcp_info { + /* Indicates the device mode which indicates about the DHCP activity */ + u8 device_mode; + + u8 addr[ETH_ALEN]; +}; + +struct dhcp_ind_status { + struct wcn36xx_hal_msg_header header; + + /* success or failure */ + u32 status; +}; + +/* + * Thermal Mitigation mode of operation. + * + * WCN36XX_HAL_THERMAL_MITIGATION_MODE_0 - Based on AMPDU disabling aggregation + * + * WCN36XX_HAL_THERMAL_MITIGATION_MODE_1 - Based on AMPDU disabling aggregation + * and reducing transmit power + * + * WCN36XX_HAL_THERMAL_MITIGATION_MODE_2 - Not supported */ +enum wcn36xx_hal_thermal_mitigation_mode_type { + HAL_THERMAL_MITIGATION_MODE_INVALID = -1, + HAL_THERMAL_MITIGATION_MODE_0, + HAL_THERMAL_MITIGATION_MODE_1, + HAL_THERMAL_MITIGATION_MODE_2, + HAL_THERMAL_MITIGATION_MODE_MAX = WCN36XX_HAL_MAX_ENUM_SIZE, +}; + + +/* + * Thermal Mitigation level. + * Note the levels are incremental i.e WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_2 = + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_0 + + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_1 + * + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_0 - lowest level of thermal mitigation. + * This level indicates normal mode of operation + * + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_1 - 1st level of thermal mitigation + * + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_2 - 2nd level of thermal mitigation + * + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_3 - 3rd level of thermal mitigation + * + * WCN36XX_HAL_THERMAL_MITIGATION_LEVEL_4 - 4th level of thermal mitigation + */ +enum wcn36xx_hal_thermal_mitigation_level_type { + HAL_THERMAL_MITIGATION_LEVEL_INVALID = -1, + HAL_THERMAL_MITIGATION_LEVEL_0, + HAL_THERMAL_MITIGATION_LEVEL_1, + HAL_THERMAL_MITIGATION_LEVEL_2, + HAL_THERMAL_MITIGATION_LEVEL_3, + HAL_THERMAL_MITIGATION_LEVEL_4, + HAL_THERMAL_MITIGATION_LEVEL_MAX = WCN36XX_HAL_MAX_ENUM_SIZE, +}; + + +/* WCN36XX_HAL_SET_THERMAL_MITIGATION_REQ */ +struct set_thermal_mitigation_req_msg { + struct wcn36xx_hal_msg_header header; + + /* Thermal Mitigation Operation Mode */ + enum wcn36xx_hal_thermal_mitigation_mode_type mode; + + /* Thermal Mitigation Level */ + enum wcn36xx_hal_thermal_mitigation_level_type level; +}; + +struct set_thermal_mitigation_resp { + + struct wcn36xx_hal_msg_header header; + + /* status of the request */ + u32 status; +}; + +/* Per STA Class B Statistics. Class B statistics are STA TX/RX stats + * provided to FW from Host via periodic messages */ +struct stats_class_b_ind { + struct wcn36xx_hal_msg_header header; + + /* Duration over which this stats was collected */ + u32 duration; + + /* Per STA Stats */ + + /* TX stats */ + u32 tx_bytes_pushed; + u32 tx_packets_pushed; + + /* RX stats */ + u32 rx_bytes_rcvd; + u32 rx_packets_rcvd; + u32 rx_time_total; +}; + +/* WCN36XX_HAL_PRINT_REG_INFO_IND */ +struct wcn36xx_hal_print_reg_info_ind { + struct wcn36xx_hal_msg_header header; + + u32 count; + u32 scenario; + u32 reason; + + struct { + u32 addr; + u32 value; + } regs[]; +} __packed; + +#endif /* _HAL_H_ */ |