diff options
Diffstat (limited to 'drivers/net/wireless/realtek/rtl818x')
25 files changed, 7969 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtl818x/Kconfig b/drivers/net/wireless/realtek/rtl818x/Kconfig new file mode 100644 index 000000000..603812c9a --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/Kconfig @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# RTL818X Wireless LAN device configuration +# +config RTL8180 + tristate "Realtek 8180/8185/8187SE PCI support" + depends on MAC80211 && PCI + select EEPROM_93CX6 + help + This is a driver for RTL8180, RTL8185 and RTL8187SE based cards. + These are PCI based chips found in cards such as: + + (RTL8185 802.11g) + A-Link WL54PC + + (RTL8180 802.11b) + Belkin F5D6020 v3 + Belkin F5D6020 v3 + Dlink DWL-610 + Dlink DWL-510 + Netgear MA521 + Level-One WPC-0101 + Acer Aspire 1357 LMi + VCTnet PC-11B1 + Ovislink AirLive WL-1120PCM + Mentor WL-PCI + Linksys WPC11 v4 + TrendNET TEW-288PI + D-Link DWL-520 Rev D + Repotec RP-WP7126 + TP-Link TL-WN250/251 + Zonet ZEW1000 + Longshine LCS-8031-R + HomeLine HLW-PCC200 + GigaFast WF721-AEX + Planet WL-3553 + Encore ENLWI-PCI1-NT + TrendNET TEW-266PC + Gigabyte GN-WLMR101 + Siemens-fujitsu Amilo D1840W + Edimax EW-7126 + PheeNet WL-11PCIR + Tonze PC-2100T + Planet WL-8303 + Dlink DWL-650 v M1 + Edimax EW-7106 + Q-Tec 770WC + Topcom Skyr@cer 4011b + Roper FreeLan 802.11b (edition 2004) + Wistron Neweb Corp CB-200B + Pentagram HorNET + QTec 775WC + TwinMOS Booming B Series + Micronet SP906BB + Sweex LC700010 + Surecom EP-9428 + Safecom SWLCR-1100 + + Thanks to Realtek for their support! + +config RTL8187 + tristate "Realtek 8187 and 8187B USB support" + depends on MAC80211 && USB + select EEPROM_93CX6 + help + This is a driver for RTL8187 and RTL8187B based cards. + These are USB based chips found in devices such as: + + Netgear WG111v2 + Level 1 WNC-0301USB + Micronet SP907GK V5 + Encore ENUWI-G2 + Trendnet TEW-424UB + ASUS P5B Deluxe/P5K Premium motherboards + Toshiba Satellite Pro series of laptops + Asus Wireless Link + Linksys WUSB54GC-EU v2 + (v1 = rt73usb; v3 is rt2070-based, + use staging/rt3070 or try rt2800usb) + + Thanks to Realtek for their support! + +# If possible, automatically enable LEDs for RTL8187. + +config RTL8187_LEDS + bool + depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187) + default y + diff --git a/drivers/net/wireless/realtek/rtl818x/Makefile b/drivers/net/wireless/realtek/rtl818x/Makefile new file mode 100644 index 000000000..e03afcbf8 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_RTL8180) += rtl8180/ +obj-$(CONFIG_RTL8187) += rtl8187/ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile b/drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile new file mode 100644 index 000000000..565a9a114 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +rtl818x_pci-objs := dev.o rtl8225.o sa2400.o max2820.o grf5101.o rtl8225se.o + +obj-$(CONFIG_RTL8180) += rtl818x_pci.o + +ccflags-y += -I $(srctree)/$(src)/.. diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c new file mode 100644 index 000000000..cdfe08078 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c @@ -0,0 +1,1991 @@ + +/* Linux device driver for RTL8180 / RTL8185 / RTL8187SE + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007,2014 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8180 driver, which is: + * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al. + * + * Thanks to Realtek for their support! + * + ************************************************************************ + * + * The driver was extended to the RTL8187SE in 2014 by + * Andrea Merello <andrea.merello@gmail.com> + * + * based also on: + * - portions of rtl8187se Linux staging driver, Copyright Realtek corp. + * (available in drivers/staging/rtl8187se directory of Linux 3.14) + * - other GPL, unpublished (until now), Linux driver code, + * Copyright Larry Finger <Larry.Finger@lwfinger.net> + * + * A huge thanks goes to Sara V. Nari who forgives me when I'm + * sitting in front of my laptop at evening, week-end, night... + * + * A special thanks goes to Antonio Cuni, who helped me with + * some python userspace stuff I used to debug RTL8187SE code, and who + * bought a laptop with an unsupported Wi-Fi card some years ago... + * + * Thanks to Larry Finger for writing some code for rtl8187se and for + * his suggestions. + * + * Thanks to Dan Carpenter for reviewing my initial patch and for his + * suggestions. + * + * Thanks to Bernhard Schiffner for his help in testing and for his + * suggestions. + * + ************************************************************************ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/eeprom_93cx6.h> +#include <linux/module.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "rtl8225.h" +#include "sa2400.h" +#include "max2820.h" +#include "grf5101.h" +#include "rtl8225se.h" + +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>"); +MODULE_DESCRIPTION("RTL8180 / RTL8185 / RTL8187SE PCI wireless driver"); +MODULE_LICENSE("GPL"); + +static const struct pci_device_id rtl8180_table[] = { + + /* rtl8187se */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8199) }, + + /* rtl8185 */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) }, + { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) }, + { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) }, + + /* rtl8180 */ + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) }, + { PCI_DEVICE(0x1799, 0x6001) }, + { PCI_DEVICE(0x1799, 0x6020) }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) }, + { PCI_DEVICE(0x1186, 0x3301) }, + { PCI_DEVICE(0x1432, 0x7106) }, + { } +}; + +MODULE_DEVICE_TABLE(pci, rtl8180_table); + +static const struct ieee80211_rate rtl818x_rates[] = { + { .bitrate = 10, .hw_value = 0, }, + { .bitrate = 20, .hw_value = 1, }, + { .bitrate = 55, .hw_value = 2, }, + { .bitrate = 110, .hw_value = 3, }, + { .bitrate = 60, .hw_value = 4, }, + { .bitrate = 90, .hw_value = 5, }, + { .bitrate = 120, .hw_value = 6, }, + { .bitrate = 180, .hw_value = 7, }, + { .bitrate = 240, .hw_value = 8, }, + { .bitrate = 360, .hw_value = 9, }, + { .bitrate = 480, .hw_value = 10, }, + { .bitrate = 540, .hw_value = 11, }, +}; + +static const struct ieee80211_channel rtl818x_channels[] = { + { .center_freq = 2412 }, + { .center_freq = 2417 }, + { .center_freq = 2422 }, + { .center_freq = 2427 }, + { .center_freq = 2432 }, + { .center_freq = 2437 }, + { .center_freq = 2442 }, + { .center_freq = 2447 }, + { .center_freq = 2452 }, + { .center_freq = 2457 }, + { .center_freq = 2462 }, + { .center_freq = 2467 }, + { .center_freq = 2472 }, + { .center_freq = 2484 }, +}; + +/* Queues for rtl8187se card + * + * name | reg | queue + * BC | 7 | 6 + * MG | 1 | 0 + * HI | 6 | 1 + * VO | 5 | 2 + * VI | 4 | 3 + * BE | 3 | 4 + * BK | 2 | 5 + * + * The complete map for DMA kick reg using use all queue is: + * static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = + * {1, 6, 5, 4, 3, 2, 7}; + * + * .. but.. Because for mac80211 4 queues are enough for QoS we use this + * + * name | reg | queue + * BC | 7 | 4 <- currently not used yet + * MG | 1 | x <- Not used + * HI | 6 | x <- Not used + * VO | 5 | 0 <- used + * VI | 4 | 1 <- used + * BE | 3 | 2 <- used + * BK | 2 | 3 <- used + * + * Beacon queue could be used, but this is not finished yet. + * + * I thougth about using the other two queues but I decided not to do this: + * + * - I'm unsure whether the mac80211 will ever try to use more than 4 queues + * by itself. + * + * - I could route MGMT frames (currently sent over VO queue) to the MGMT + * queue but since mac80211 will do not know about it, I will probably gain + * some HW priority whenever the VO queue is not empty, but this gain is + * limited by the fact that I had to stop the mac80211 queue whenever one of + * the VO or MGMT queues is full, stopping also submitting of MGMT frame + * to the driver. + * + * - I don't know how to set in the HW the contention window params for MGMT + * and HI-prio queues. + */ + +static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = {5, 4, 3, 2, 7}; + +/* Queues for rtl8180/rtl8185 cards + * + * name | reg | prio + * BC | 7 | 3 + * HI | 6 | 0 + * NO | 5 | 1 + * LO | 4 | 2 + * + * The complete map for DMA kick reg using all queue is: + * static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {6, 5, 4, 7}; + * + * .. but .. Because the mac80211 needs at least 4 queues for QoS or + * otherwise QoS can't be done, we use just one. + * Beacon queue could be used, but this is not finished yet. + * Actual map is: + * + * name | reg | prio + * BC | 7 | 1 <- currently not used yet. + * HI | 6 | x <- not used + * NO | 5 | x <- not used + * LO | 4 | 0 <- used + */ + +static const int rtl8180_queues_map[RTL8180_NR_TX_QUEUES] = {4, 7}; + +/* LNA gain table for rtl8187se */ +static const u8 rtl8187se_lna_gain[4] = {02, 17, 29, 39}; + +void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8180_priv *priv = dev->priv; + int i = 10; + u32 buf; + + buf = (data << 8) | addr; + + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80); + while (i--) { + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf); + if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF)) + return; + } +} + +static void rtl8180_handle_rx(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl818x_rx_cmd_desc *cmd_desc; + unsigned int count = 32; + u8 agc, sq; + s8 signal = 1; + dma_addr_t mapping; + + while (count--) { + void *entry = priv->rx_ring + priv->rx_idx * priv->rx_ring_sz; + struct sk_buff *skb = priv->rx_buf[priv->rx_idx]; + u32 flags, flags2, flags3 = 0; + u64 tsft; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + struct rtl8187se_rx_desc *desc = entry; + + flags = le32_to_cpu(desc->flags); + /* if ownership flag is set, then we can trust the + * HW has written other fields. We must not trust + * other descriptor data read before we checked (read) + * the ownership flag + */ + rmb(); + flags3 = le32_to_cpu(desc->flags3); + flags2 = le32_to_cpu(desc->flags2); + tsft = le64_to_cpu(desc->tsft); + } else { + struct rtl8180_rx_desc *desc = entry; + + flags = le32_to_cpu(desc->flags); + /* same as above */ + rmb(); + flags2 = le32_to_cpu(desc->flags2); + tsft = le64_to_cpu(desc->tsft); + } + + if (flags & RTL818X_RX_DESC_FLAG_OWN) + return; + + if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL | + RTL818X_RX_DESC_FLAG_FOF | + RTL818X_RX_DESC_FLAG_RX_ERR))) + goto done; + else { + struct ieee80211_rx_status rx_status = {0}; + struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE); + + if (unlikely(!new_skb)) + goto done; + + mapping = dma_map_single(&priv->pdev->dev, + skb_tail_pointer(new_skb), + MAX_RX_SIZE, DMA_FROM_DEVICE); + + if (dma_mapping_error(&priv->pdev->dev, mapping)) { + kfree_skb(new_skb); + dev_err(&priv->pdev->dev, "RX DMA map error\n"); + + goto done; + } + + dma_unmap_single(&priv->pdev->dev, + *((dma_addr_t *)skb->cb), + MAX_RX_SIZE, DMA_FROM_DEVICE); + skb_put(skb, flags & 0xFFF); + + rx_status.antenna = (flags2 >> 15) & 1; + rx_status.rate_idx = (flags >> 20) & 0xF; + agc = (flags2 >> 17) & 0x7F; + + switch (priv->chip_family) { + case RTL818X_CHIP_FAMILY_RTL8185: + if (rx_status.rate_idx > 3) + signal = -clamp_t(u8, agc, 25, 90) - 9; + else + signal = -clamp_t(u8, agc, 30, 95); + break; + case RTL818X_CHIP_FAMILY_RTL8180: + sq = flags2 & 0xff; + signal = priv->rf->calc_rssi(agc, sq); + break; + case RTL818X_CHIP_FAMILY_RTL8187SE: + /* OFDM measure reported by HW is signed, + * in 0.5dBm unit, with zero centered @ -41dBm + * input signal. + */ + if (rx_status.rate_idx > 3) { + signal = (s8)((flags3 >> 16) & 0xff); + signal = signal / 2 - 41; + } else { + int idx, bb; + + idx = (agc & 0x60) >> 5; + bb = (agc & 0x1F) * 2; + /* bias + BB gain + LNA gain */ + signal = 4 - bb - rtl8187se_lna_gain[idx]; + } + break; + } + rx_status.signal = signal; + rx_status.freq = dev->conf.chandef.chan->center_freq; + rx_status.band = dev->conf.chandef.chan->band; + rx_status.mactime = tsft; + rx_status.flag |= RX_FLAG_MACTIME_START; + if (flags & RTL818X_RX_DESC_FLAG_SPLCP) + rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE; + if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) + rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; + + memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); + ieee80211_rx_irqsafe(dev, skb); + + skb = new_skb; + priv->rx_buf[priv->rx_idx] = skb; + *((dma_addr_t *) skb->cb) = mapping; + } + + done: + cmd_desc = entry; + cmd_desc->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb)); + cmd_desc->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | + MAX_RX_SIZE); + if (priv->rx_idx == 31) + cmd_desc->flags |= + cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); + priv->rx_idx = (priv->rx_idx + 1) % 32; + } +} + +static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring = &priv->tx_ring[prio]; + + while (skb_queue_len(&ring->queue)) { + struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; + struct sk_buff *skb; + struct ieee80211_tx_info *info; + u32 flags = le32_to_cpu(entry->flags); + + if (flags & RTL818X_TX_DESC_FLAG_OWN) + return; + + ring->idx = (ring->idx + 1) % ring->entries; + skb = __skb_dequeue(&ring->queue); + dma_unmap_single(&priv->pdev->dev, le32_to_cpu(entry->tx_buf), + skb->len, DMA_TO_DEVICE); + + info = IEEE80211_SKB_CB(skb); + ieee80211_tx_info_clear_status(info); + + if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && + (flags & RTL818X_TX_DESC_FLAG_TX_OK)) + info->flags |= IEEE80211_TX_STAT_ACK; + + info->status.rates[0].count = (flags & 0xFF) + 1; + + ieee80211_tx_status_irqsafe(dev, skb); + if (ring->entries - skb_queue_len(&ring->queue) == 2) + ieee80211_wake_queue(dev, prio); + } +} + +static irqreturn_t rtl8187se_interrupt(int irq, void *dev_id) +{ + struct ieee80211_hw *dev = dev_id; + struct rtl8180_priv *priv = dev->priv; + u32 reg; + unsigned long flags; + static int desc_err; + + spin_lock_irqsave(&priv->lock, flags); + /* Note: 32-bit interrupt status */ + reg = rtl818x_ioread32(priv, &priv->map->INT_STATUS_SE); + if (unlikely(reg == 0xFFFFFFFF)) { + spin_unlock_irqrestore(&priv->lock, flags); + return IRQ_HANDLED; + } + + rtl818x_iowrite32(priv, &priv->map->INT_STATUS_SE, reg); + + if (reg & IMR_TIMEOUT1) + rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); + + if (reg & (IMR_TBDOK | IMR_TBDER)) + rtl8180_handle_tx(dev, 4); + + if (reg & (IMR_TVODOK | IMR_TVODER)) + rtl8180_handle_tx(dev, 0); + + if (reg & (IMR_TVIDOK | IMR_TVIDER)) + rtl8180_handle_tx(dev, 1); + + if (reg & (IMR_TBEDOK | IMR_TBEDER)) + rtl8180_handle_tx(dev, 2); + + if (reg & (IMR_TBKDOK | IMR_TBKDER)) + rtl8180_handle_tx(dev, 3); + + if (reg & (IMR_ROK | IMR_RER | RTL818X_INT_SE_RX_DU | IMR_RQOSOK)) + rtl8180_handle_rx(dev); + /* The interface sometimes generates several RX DMA descriptor errors + * at startup. Do not report these. + */ + if ((reg & RTL818X_INT_SE_RX_DU) && desc_err++ > 2) + if (net_ratelimit()) + wiphy_err(dev->wiphy, "No RX DMA Descriptor avail\n"); + + spin_unlock_irqrestore(&priv->lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t rtl8180_interrupt(int irq, void *dev_id) +{ + struct ieee80211_hw *dev = dev_id; + struct rtl8180_priv *priv = dev->priv; + u16 reg; + + spin_lock(&priv->lock); + reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS); + if (unlikely(reg == 0xFFFF)) { + spin_unlock(&priv->lock); + return IRQ_HANDLED; + } + + rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg); + + if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR)) + rtl8180_handle_tx(dev, 1); + + if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR)) + rtl8180_handle_tx(dev, 0); + + if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR)) + rtl8180_handle_rx(dev); + + spin_unlock(&priv->lock); + + return IRQ_HANDLED; +} + +static void rtl8180_tx(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring; + struct rtl8180_tx_desc *entry; + unsigned int prio = 0; + unsigned long flags; + unsigned int idx, hw_prio; + + dma_addr_t mapping; + u32 tx_flags; + u8 rc_flags; + u16 plcp_len = 0; + __le16 rts_duration = 0; + /* do arithmetic and then convert to le16 */ + u16 frame_duration = 0; + + /* rtl8180/rtl8185 only has one useable tx queue */ + if (dev->queues > IEEE80211_AC_BK) + prio = skb_get_queue_mapping(skb); + ring = &priv->tx_ring[prio]; + + mapping = dma_map_single(&priv->pdev->dev, skb->data, skb->len, + DMA_TO_DEVICE); + + if (dma_mapping_error(&priv->pdev->dev, mapping)) { + kfree_skb(skb); + dev_err(&priv->pdev->dev, "TX DMA mapping error\n"); + return; + } + + tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | + RTL818X_TX_DESC_FLAG_LS | + (ieee80211_get_tx_rate(dev, info)->hw_value << 24) | + skb->len; + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) + tx_flags |= RTL818X_TX_DESC_FLAG_DMA | + RTL818X_TX_DESC_FLAG_NO_ENC; + + rc_flags = info->control.rates[0].flags; + + /* HW will perform RTS-CTS when only RTS flags is set. + * HW will perform CTS-to-self when both RTS and CTS flags are set. + * RTS rate and RTS duration will be used also for CTS-to-self. + */ + if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) { + tx_flags |= RTL818X_TX_DESC_FLAG_RTS; + tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; + rts_duration = ieee80211_rts_duration(dev, priv->vif, + skb->len, info); + } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { + tx_flags |= RTL818X_TX_DESC_FLAG_RTS | RTL818X_TX_DESC_FLAG_CTS; + tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; + rts_duration = ieee80211_ctstoself_duration(dev, priv->vif, + skb->len, info); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) { + unsigned int remainder; + + plcp_len = DIV_ROUND_UP(16 * (skb->len + 4), + (ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10); + remainder = (16 * (skb->len + 4)) % + ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10); + if (remainder <= 6) + plcp_len |= 1 << 15; + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + __le16 duration; + /* SIFS time (required by HW) is already included by + * ieee80211_generic_frame_duration + */ + duration = ieee80211_generic_frame_duration(dev, priv->vif, + NL80211_BAND_2GHZ, skb->len, + ieee80211_get_tx_rate(dev, info)); + + frame_duration = priv->ack_time + le16_to_cpu(duration); + } + + spin_lock_irqsave(&priv->lock, flags); + + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + priv->seqno += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(priv->seqno); + } + + idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries; + entry = &ring->desc[idx]; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + entry->frame_duration = cpu_to_le16(frame_duration); + entry->frame_len_se = cpu_to_le16(skb->len); + + /* tpc polarity */ + entry->flags3 = cpu_to_le16(1<<4); + } else + entry->frame_len = cpu_to_le32(skb->len); + + entry->rts_duration = rts_duration; + entry->plcp_len = cpu_to_le16(plcp_len); + entry->tx_buf = cpu_to_le32(mapping); + + entry->retry_limit = info->control.rates[0].count - 1; + + /* We must be sure that tx_flags is written last because the HW + * looks at it to check if the rest of data is valid or not + */ + wmb(); + entry->flags = cpu_to_le32(tx_flags); + /* We must be sure this has been written before followings HW + * register write, because this write will made the HW attempts + * to DMA the just-written data + */ + wmb(); + + __skb_queue_tail(&ring->queue, skb); + if (ring->entries - skb_queue_len(&ring->queue) < 2) + ieee80211_stop_queue(dev, prio); + + spin_unlock_irqrestore(&priv->lock, flags); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + /* just poll: rings are stopped with TPPollStop reg */ + hw_prio = rtl8187se_queues_map[prio]; + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, + (1 << hw_prio)); + } else { + hw_prio = rtl8180_queues_map[prio]; + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, + (1 << hw_prio) | /* ring to poll */ + (1<<1) | (1<<2));/* stopped rings */ + } +} + +static void rtl8180_set_anaparam3(struct rtl8180_priv *priv, u16 anaparam3) +{ + u8 reg; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_CONFIG); + + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite16(priv, &priv->map->ANAPARAM3, anaparam3); + + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); +} + +void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2) +{ + u8 reg; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_CONFIG); + + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2); + + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); +} + +void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam) +{ + u8 reg; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); +} + +static void rtl8187se_mac_config(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u8 reg; + + rtl818x_iowrite32(priv, REG_ADDR4(0x1F0), 0); + rtl818x_ioread32(priv, REG_ADDR4(0x1F0)); + rtl818x_iowrite32(priv, REG_ADDR4(0x1F4), 0); + rtl818x_ioread32(priv, REG_ADDR4(0x1F4)); + rtl818x_iowrite8(priv, REG_ADDR1(0x1F8), 0); + rtl818x_ioread8(priv, REG_ADDR1(0x1F8)); + /* Enable DA10 TX power saving */ + reg = rtl818x_ioread8(priv, &priv->map->PHY_PR); + rtl818x_iowrite8(priv, &priv->map->PHY_PR, reg | 0x04); + /* Power */ + rtl818x_iowrite16(priv, PI_DATA_REG, 0x1000); + rtl818x_iowrite16(priv, SI_DATA_REG, 0x1000); + /* AFE - default to power ON */ + rtl818x_iowrite16(priv, REG_ADDR2(0x370), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x372), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x374), 0x0DA4); + rtl818x_iowrite16(priv, REG_ADDR2(0x376), 0x0DA4); + rtl818x_iowrite16(priv, REG_ADDR2(0x378), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x37A), 0x0560); + rtl818x_iowrite16(priv, REG_ADDR2(0x37C), 0x00EC); + rtl818x_iowrite16(priv, REG_ADDR2(0x37E), 0x00EC); + rtl818x_iowrite8(priv, REG_ADDR1(0x24E), 0x01); + /* unknown, needed for suspend to RAM resume */ + rtl818x_iowrite8(priv, REG_ADDR1(0x0A), 0x72); +} + +static void rtl8187se_set_antenna_config(struct ieee80211_hw *dev, u8 def_ant, + bool diversity) +{ + struct rtl8180_priv *priv = dev->priv; + + rtl8225_write_phy_cck(dev, 0x0C, 0x09); + if (diversity) { + if (def_ant == 1) { + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00); + rtl8225_write_phy_cck(dev, 0x11, 0xBB); + rtl8225_write_phy_cck(dev, 0x01, 0xC7); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x54); + rtl8225_write_phy_ofdm(dev, 0x18, 0xB2); + } else { /* main antenna */ + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); + rtl8225_write_phy_cck(dev, 0x11, 0x9B); + rtl8225_write_phy_cck(dev, 0x01, 0xC7); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C); + rtl8225_write_phy_ofdm(dev, 0x18, 0xB2); + } + } else { /* disable antenna diversity */ + if (def_ant == 1) { + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x00); + rtl8225_write_phy_cck(dev, 0x11, 0xBB); + rtl8225_write_phy_cck(dev, 0x01, 0x47); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x54); + rtl8225_write_phy_ofdm(dev, 0x18, 0x32); + } else { /* main antenna */ + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); + rtl8225_write_phy_cck(dev, 0x11, 0x9B); + rtl8225_write_phy_cck(dev, 0x01, 0x47); + rtl8225_write_phy_ofdm(dev, 0x0D, 0x5C); + rtl8225_write_phy_ofdm(dev, 0x18, 0x32); + } + } + /* priv->curr_ant = def_ant; */ +} + +static void rtl8180_int_enable(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->IMR, + IMR_TBDER | IMR_TBDOK | + IMR_TVODER | IMR_TVODOK | + IMR_TVIDER | IMR_TVIDOK | + IMR_TBEDER | IMR_TBEDOK | + IMR_TBKDER | IMR_TBKDOK | + IMR_RDU | IMR_RER | + IMR_ROK | IMR_RQOSOK); + } else { + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); + } +} + +static void rtl8180_int_disable(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->IMR, 0); + } else { + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + } +} + +static void rtl8180_conf_basic_rates(struct ieee80211_hw *dev, + u32 basic_mask) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg; + u32 resp_mask; + u8 basic_max; + u8 resp_max, resp_min; + + resp_mask = basic_mask; + /* IEEE80211 says the response rate should be equal to the highest basic + * rate that is not faster than received frame. But it says also that if + * the basic rate set does not contains any rate for the current + * modulation class then mandatory rate set must be used for that + * modulation class. Eventually add OFDM mandatory rates.. + */ + if ((resp_mask & 0xf) == resp_mask) + resp_mask |= 0x150; /* 6, 12, 24Mbps */ + + switch (priv->chip_family) { + + case RTL818X_CHIP_FAMILY_RTL8180: + /* in 8180 this is NOT a BITMAP */ + basic_max = fls(basic_mask) - 1; + reg = rtl818x_ioread16(priv, &priv->map->BRSR); + reg &= ~3; + reg |= basic_max; + rtl818x_iowrite16(priv, &priv->map->BRSR, reg); + break; + + case RTL818X_CHIP_FAMILY_RTL8185: + resp_max = fls(resp_mask) - 1; + resp_min = ffs(resp_mask) - 1; + /* in 8185 this is a BITMAP */ + rtl818x_iowrite16(priv, &priv->map->BRSR, basic_mask); + rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (resp_max << 4) | + resp_min); + break; + + case RTL818X_CHIP_FAMILY_RTL8187SE: + /* in 8187se this is a BITMAP. BRSR reg actually sets + * response rates. + */ + rtl818x_iowrite16(priv, &priv->map->BRSR_8187SE, resp_mask); + break; + } +} + +static void rtl8180_config_cardbus(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg16; + u8 reg8; + + reg8 = rtl818x_ioread8(priv, &priv->map->CONFIG3); + reg8 |= 1 << 1; + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg8); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite16(priv, FEMR_SE, 0xffff); + } else { + reg16 = rtl818x_ioread16(priv, &priv->map->FEMR); + reg16 |= (1 << 15) | (1 << 14) | (1 << 4); + rtl818x_iowrite16(priv, &priv->map->FEMR, reg16); + } + +} + +static int rtl8180_init_hw(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg; + u32 reg32; + + rtl818x_iowrite8(priv, &priv->map->CMD, 0); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(10); + + /* reset */ + rtl8180_int_disable(dev); + rtl818x_ioread8(priv, &priv->map->CMD); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg &= (1 << 1); + reg |= RTL818X_CMD_RESET; + rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(200); + + /* check success of reset */ + if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) { + wiphy_err(dev->wiphy, "reset timeout!\n"); + return -ETIMEDOUT; + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD); + rtl818x_ioread8(priv, &priv->map->CMD); + msleep(200); + + if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) { + rtl8180_config_cardbus(dev); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA); + else + rtl818x_iowrite8(priv, &priv->map->MSR, 0); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + rtl8180_set_anaparam(priv, priv->anaparam); + + rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma); + /* mac80211 queue have higher prio for lower index. The last queue + * (that mac80211 is not aware of) is reserved for beacons (and have + * the highest priority on the NIC) + */ + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->TBDA, + priv->tx_ring[1].dma); + rtl818x_iowrite32(priv, &priv->map->TLPDA, + priv->tx_ring[0].dma); + } else { + rtl818x_iowrite32(priv, &priv->map->TBDA, + priv->tx_ring[4].dma); + rtl818x_iowrite32(priv, &priv->map->TVODA, + priv->tx_ring[0].dma); + rtl818x_iowrite32(priv, &priv->map->TVIDA, + priv->tx_ring[1].dma); + rtl818x_iowrite32(priv, &priv->map->TBEDA, + priv->tx_ring[2].dma); + rtl818x_iowrite32(priv, &priv->map->TBKDA, + priv->tx_ring[3].dma); + } + + /* TODO: necessary? specs indicate not */ + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); + rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3)); + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) { + reg = rtl818x_ioread8(priv, &priv->map->CONFIG2); + rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4)); + } + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + /* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */ + + /* TODO: turn off hw wep on rtl8180 */ + + rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { + rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); + rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0); + } else { + rtl818x_iowrite8(priv, &priv->map->SECURITY, 0); + + rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6); + rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) { + /* TODO: set ClkRun enable? necessary? */ + reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6)); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2)); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + /* fix eccessive IFS after CTS-to-self */ + if (priv->map_pio) { + u8 reg; + + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1); + rtl818x_iowrite8(priv, REG_ADDR1(0xff), 0x35); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + } else + rtl818x_iowrite8(priv, REG_ADDR1(0x1ff), 0x35); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + + /* the set auto rate fallback bitmask from 1M to 54 Mb/s */ + rtl818x_iowrite16(priv, ARFR, 0xFFF); + rtl818x_ioread16(priv, ARFR); + + /* stop unused queus (no dma alloc) */ + rtl818x_iowrite8(priv, &priv->map->TPPOLL_STOP, + RTL818x_TPPOLL_STOP_MG | RTL818x_TPPOLL_STOP_HI); + + rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0x00); + rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50); + + rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0); + + /* some black magic here.. */ + rtl8187se_mac_config(dev); + + rtl818x_iowrite16(priv, RFSW_CTRL, 0x569A); + rtl818x_ioread16(priv, RFSW_CTRL); + + rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_ON); + rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_ON); + rtl8180_set_anaparam3(priv, RTL8225SE_ANAPARAM3); + + + rtl818x_iowrite8(priv, &priv->map->CONFIG5, + rtl818x_ioread8(priv, &priv->map->CONFIG5) & 0x7F); + + /*probably this switch led on */ + rtl818x_iowrite8(priv, &priv->map->PGSELECT, + rtl818x_ioread8(priv, &priv->map->PGSELECT) | 0x08); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1BFF); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488); + + rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x4003); + + /* the reference code mac hardcode table write + * this reg by doing byte-wide accesses. + * It does it just for lowest and highest byte.. + */ + reg32 = rtl818x_ioread32(priv, &priv->map->RF_PARA); + reg32 &= 0x00ffff00; + reg32 |= 0xb8000054; + rtl818x_iowrite32(priv, &priv->map->RF_PARA, reg32); + } else + /* stop unused queus (no dma alloc) */ + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, + (1<<1) | (1<<2)); + + priv->rf->init(dev); + + /* default basic rates are 1,2 Mbps for rtl8180. 1,2,6,9,12,18,24 Mbps + * otherwise. bitmask 0x3 and 0x01f3 respectively. + * NOTE: currenty rtl8225 RF code changes basic rates, so we need to do + * this after rf init. + * TODO: try to find out whether RF code really needs to do this.. + */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + rtl8180_conf_basic_rates(dev, 0x3); + else + rtl8180_conf_basic_rates(dev, 0x1f3); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + rtl8187se_set_antenna_config(dev, + priv->antenna_diversity_default, + priv->antenna_diversity_en); + return 0; +} + +static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl818x_rx_cmd_desc *entry; + int i; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + priv->rx_ring_sz = sizeof(struct rtl8187se_rx_desc); + else + priv->rx_ring_sz = sizeof(struct rtl8180_rx_desc); + + priv->rx_ring = dma_alloc_coherent(&priv->pdev->dev, + priv->rx_ring_sz * 32, + &priv->rx_ring_dma, GFP_KERNEL); + if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) { + wiphy_err(dev->wiphy, "Cannot allocate RX ring\n"); + return -ENOMEM; + } + + priv->rx_idx = 0; + + for (i = 0; i < 32; i++) { + struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE); + dma_addr_t *mapping; + entry = priv->rx_ring + priv->rx_ring_sz*i; + if (!skb) { + dma_free_coherent(&priv->pdev->dev, + priv->rx_ring_sz * 32, + priv->rx_ring, priv->rx_ring_dma); + wiphy_err(dev->wiphy, "Cannot allocate RX skb\n"); + return -ENOMEM; + } + priv->rx_buf[i] = skb; + mapping = (dma_addr_t *)skb->cb; + *mapping = dma_map_single(&priv->pdev->dev, + skb_tail_pointer(skb), MAX_RX_SIZE, + DMA_FROM_DEVICE); + + if (dma_mapping_error(&priv->pdev->dev, *mapping)) { + kfree_skb(skb); + dma_free_coherent(&priv->pdev->dev, + priv->rx_ring_sz * 32, + priv->rx_ring, priv->rx_ring_dma); + wiphy_err(dev->wiphy, "Cannot map DMA for RX skb\n"); + return -ENOMEM; + } + + entry->rx_buf = cpu_to_le32(*mapping); + entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN | + MAX_RX_SIZE); + } + entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR); + return 0; +} + +static void rtl8180_free_rx_ring(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + + for (i = 0; i < 32; i++) { + struct sk_buff *skb = priv->rx_buf[i]; + if (!skb) + continue; + + dma_unmap_single(&priv->pdev->dev, *((dma_addr_t *)skb->cb), + MAX_RX_SIZE, DMA_FROM_DEVICE); + kfree_skb(skb); + } + + dma_free_coherent(&priv->pdev->dev, priv->rx_ring_sz * 32, + priv->rx_ring, priv->rx_ring_dma); + priv->rx_ring = NULL; +} + +static int rtl8180_init_tx_ring(struct ieee80211_hw *dev, + unsigned int prio, unsigned int entries) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_desc *ring; + dma_addr_t dma; + int i; + + ring = dma_alloc_coherent(&priv->pdev->dev, sizeof(*ring) * entries, + &dma, GFP_KERNEL); + if (!ring || (unsigned long)ring & 0xFF) { + wiphy_err(dev->wiphy, "Cannot allocate TX ring (prio = %d)\n", + prio); + return -ENOMEM; + } + + priv->tx_ring[prio].desc = ring; + priv->tx_ring[prio].dma = dma; + priv->tx_ring[prio].idx = 0; + priv->tx_ring[prio].entries = entries; + skb_queue_head_init(&priv->tx_ring[prio].queue); + + for (i = 0; i < entries; i++) + ring[i].next_tx_desc = + cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring)); + + return 0; +} + +static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_tx_ring *ring = &priv->tx_ring[prio]; + + while (skb_queue_len(&ring->queue)) { + struct rtl8180_tx_desc *entry = &ring->desc[ring->idx]; + struct sk_buff *skb = __skb_dequeue(&ring->queue); + + dma_unmap_single(&priv->pdev->dev, le32_to_cpu(entry->tx_buf), + skb->len, DMA_TO_DEVICE); + kfree_skb(skb); + ring->idx = (ring->idx + 1) % ring->entries; + } + + dma_free_coherent(&priv->pdev->dev, + sizeof(*ring->desc) * ring->entries, ring->desc, + ring->dma); + ring->desc = NULL; +} + +static int rtl8180_start(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int ret, i; + u32 reg; + + ret = rtl8180_init_rx_ring(dev); + if (ret) + return ret; + + for (i = 0; i < (dev->queues + 1); i++) + if ((ret = rtl8180_init_tx_ring(dev, i, 16))) + goto err_free_rings; + + ret = rtl8180_init_hw(dev); + if (ret) + goto err_free_rings; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + ret = request_irq(priv->pdev->irq, rtl8187se_interrupt, + IRQF_SHARED, KBUILD_MODNAME, dev); + } else { + ret = request_irq(priv->pdev->irq, rtl8180_interrupt, + IRQF_SHARED, KBUILD_MODNAME, dev); + } + + if (ret) { + wiphy_err(dev->wiphy, "failed to register IRQ handler\n"); + goto err_free_rings; + } + + rtl8180_int_enable(dev); + + /* in rtl8187se at MAR regs offset there is the management + * TX descriptor DMA addres.. + */ + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8187SE) { + rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0); + rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0); + } + + reg = RTL818X_RX_CONF_ONLYERLPKT | + RTL818X_RX_CONF_RX_AUTORESETPHY | + RTL818X_RX_CONF_MGMT | + RTL818X_RX_CONF_DATA | + (7 << 8 /* MAX RX DMA */) | + RTL818X_RX_CONF_BROADCAST | + RTL818X_RX_CONF_NICMAC; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) + reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2; + else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) { + reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1) + ? RTL818X_RX_CONF_CSDM1 : 0; + reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2) + ? RTL818X_RX_CONF_CSDM2 : 0; + } else { + reg &= ~(RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2); + } + + priv->rx_conf = reg; + rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { + reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); + + /* CW is not on per-packet basis. + * in rtl8185 the CW_VALUE reg is used. + * in rtl8187se the AC param regs are used. + */ + reg &= ~RTL818X_CW_CONF_PERPACKET_CW; + /* retry limit IS on per-packet basis. + * the short and long retry limit in TX_CONF + * reg are ignored + */ + reg |= RTL818X_CW_CONF_PERPACKET_RETRY; + rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); + /* TX antenna and TX gain are not on per-packet basis. + * TX Antenna is selected by ANTSEL reg (RX in BB regs). + * TX gain is selected with CCK_TX_AGC and OFDM_TX_AGC regs + */ + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL; + reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT; + rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); + + /* disable early TX */ + rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f); + } + + reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); + reg |= (6 << 21 /* MAX TX DMA */) | + RTL818X_TX_CONF_NO_ICV; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + reg |= 1<<30; /* "duration procedure mode" */ + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) + reg &= ~RTL818X_TX_CONF_PROBE_DTS; + else + reg &= ~RTL818X_TX_CONF_HW_SEQNUM; + + reg &= ~RTL818X_TX_CONF_DISCW; + + /* different meaning, same value on both rtl8185 and rtl8180 */ + reg &= ~RTL818X_TX_CONF_SAT_HWPLCP; + + rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg |= RTL818X_CMD_RX_ENABLE; + reg |= RTL818X_CMD_TX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + + return 0; + + err_free_rings: + rtl8180_free_rx_ring(dev); + for (i = 0; i < (dev->queues + 1); i++) + if (priv->tx_ring[i].desc) + rtl8180_free_tx_ring(dev, i); + + return ret; +} + +static void rtl8180_stop(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u8 reg; + int i; + + rtl8180_int_disable(dev); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg &= ~RTL818X_CMD_TX_ENABLE; + reg &= ~RTL818X_CMD_RX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + + priv->rf->stop(dev); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG4); + rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + free_irq(priv->pdev->irq, dev); + + rtl8180_free_rx_ring(dev); + for (i = 0; i < (dev->queues + 1); i++) + rtl8180_free_tx_ring(dev, i); +} + +static u64 rtl8180_get_tsf(struct ieee80211_hw *dev, + struct ieee80211_vif *vif) +{ + struct rtl8180_priv *priv = dev->priv; + + return rtl818x_ioread32(priv, &priv->map->TSFT[0]) | + (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32; +} + +static void rtl8180_beacon_work(struct work_struct *work) +{ + struct rtl8180_vif *vif_priv = + container_of(work, struct rtl8180_vif, beacon_work.work); + struct ieee80211_vif *vif = + container_of((void *)vif_priv, struct ieee80211_vif, drv_priv); + struct ieee80211_hw *dev = vif_priv->dev; + struct ieee80211_mgmt *mgmt; + struct sk_buff *skb; + + /* don't overflow the tx ring */ + if (ieee80211_queue_stopped(dev, 0)) + goto resched; + + /* grab a fresh beacon */ + skb = ieee80211_beacon_get(dev, vif, 0); + if (!skb) + goto resched; + + /* + * update beacon timestamp w/ TSF value + * TODO: make hardware update beacon timestamp + */ + mgmt = (struct ieee80211_mgmt *)skb->data; + mgmt->u.beacon.timestamp = cpu_to_le64(rtl8180_get_tsf(dev, vif)); + + /* TODO: use actual beacon queue */ + skb_set_queue_mapping(skb, 0); + + rtl8180_tx(dev, NULL, skb); + +resched: + /* + * schedule next beacon + * TODO: use hardware support for beacon timing + */ + schedule_delayed_work(&vif_priv->beacon_work, + usecs_to_jiffies(1024 * vif->bss_conf.beacon_int)); +} + +static int rtl8180_add_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_vif *vif_priv; + + /* + * We only support one active interface at a time. + */ + if (priv->vif) + return -EBUSY; + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + break; + default: + return -EOPNOTSUPP; + } + + priv->vif = vif; + + /* Initialize driver private area */ + vif_priv = (struct rtl8180_vif *)&vif->drv_priv; + vif_priv->dev = dev; + INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8180_beacon_work); + vif_priv->enable_beacon = false; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0], + le32_to_cpu(*(__le32 *)vif->addr)); + rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4], + le16_to_cpu(*(__le16 *)(vif->addr + 4))); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + return 0; +} + +static void rtl8180_remove_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif) +{ + struct rtl8180_priv *priv = dev->priv; + priv->vif = NULL; +} + +static int rtl8180_config(struct ieee80211_hw *dev, u32 changed) +{ + struct rtl8180_priv *priv = dev->priv; + struct ieee80211_conf *conf = &dev->conf; + + priv->rf->set_chan(dev, conf); + + return 0; +} + +static void rtl8187se_conf_ac_parm(struct ieee80211_hw *dev, u8 queue) +{ + const struct ieee80211_tx_queue_params *params; + struct rtl8180_priv *priv = dev->priv; + + /* hw value */ + u32 ac_param; + + u8 aifs; + u8 txop; + u8 cw_min, cw_max; + + params = &priv->queue_param[queue]; + + cw_min = fls(params->cw_min); + cw_max = fls(params->cw_max); + + aifs = 10 + params->aifs * priv->slot_time; + + /* TODO: check if txop HW is in us (mult by 32) */ + txop = params->txop; + + ac_param = txop << AC_PARAM_TXOP_LIMIT_SHIFT | + cw_max << AC_PARAM_ECW_MAX_SHIFT | + cw_min << AC_PARAM_ECW_MIN_SHIFT | + aifs << AC_PARAM_AIFS_SHIFT; + + switch (queue) { + case IEEE80211_AC_BK: + rtl818x_iowrite32(priv, &priv->map->AC_BK_PARAM, ac_param); + break; + case IEEE80211_AC_BE: + rtl818x_iowrite32(priv, &priv->map->AC_BE_PARAM, ac_param); + break; + case IEEE80211_AC_VI: + rtl818x_iowrite32(priv, &priv->map->AC_VI_PARAM, ac_param); + break; + case IEEE80211_AC_VO: + rtl818x_iowrite32(priv, &priv->map->AC_VO_PARAM, ac_param); + break; + } +} + +static int rtl8180_conf_tx(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + unsigned int link_id, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct rtl8180_priv *priv = dev->priv; + u8 cw_min, cw_max; + + /* nothing to do ? */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + return 0; + + cw_min = fls(params->cw_min); + cw_max = fls(params->cw_max); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + priv->queue_param[queue] = *params; + rtl8187se_conf_ac_parm(dev, queue); + } else + rtl818x_iowrite8(priv, &priv->map->CW_VAL, + (cw_max << 4) | cw_min); + return 0; +} + +static void rtl8180_conf_erp(struct ieee80211_hw *dev, + struct ieee80211_bss_conf *info) +{ + struct rtl8180_priv *priv = dev->priv; + u8 sifs, difs; + int eifs; + u8 hw_eifs; + + /* TODO: should we do something ? */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) + return; + + /* I _hope_ this means 10uS for the HW. + * In reference code it is 0x22 for + * both rtl8187L and rtl8187SE + */ + sifs = 0x22; + + if (info->use_short_slot) + priv->slot_time = 9; + else + priv->slot_time = 20; + + /* 10 is SIFS time in uS */ + difs = 10 + 2 * priv->slot_time; + eifs = 10 + difs + priv->ack_time; + + /* HW should use 4uS units for EIFS (I'm sure for rtl8185)*/ + hw_eifs = DIV_ROUND_UP(eifs, 4); + + + rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time); + rtl818x_iowrite8(priv, &priv->map->SIFS, sifs); + rtl818x_iowrite8(priv, &priv->map->DIFS, difs); + + /* from reference code. set ack timeout reg = eifs reg */ + rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, hw_eifs); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + rtl818x_iowrite8(priv, &priv->map->EIFS_8187SE, hw_eifs); + else if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8185) { + /* rtl8187/rtl8185 HW bug. After EIFS is elapsed, + * the HW still wait for DIFS. + * HW uses 4uS units for EIFS. + */ + hw_eifs = DIV_ROUND_UP(eifs - difs, 4); + + rtl818x_iowrite8(priv, &priv->map->EIFS, hw_eifs); + } +} + +static void rtl8180_bss_info_changed(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, + u64 changed) +{ + struct rtl8180_priv *priv = dev->priv; + struct rtl8180_vif *vif_priv; + int i; + u8 reg; + + vif_priv = (struct rtl8180_vif *)&vif->drv_priv; + + if (changed & BSS_CHANGED_BSSID) { + rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->BSSID[0], + le16_to_cpu(*(__le16 *)info->bssid)); + rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->BSSID[2], + le32_to_cpu(*(__le32 *)(info->bssid + 2))); + + if (is_valid_ether_addr(info->bssid)) { + if (vif->type == NL80211_IFTYPE_ADHOC) + reg = RTL818X_MSR_ADHOC; + else + reg = RTL818X_MSR_INFRA; + } else + reg = RTL818X_MSR_NO_LINK; + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + reg |= RTL818X_MSR_ENEDCA; + + rtl818x_iowrite8(priv, &priv->map->MSR, reg); + } + + if (changed & BSS_CHANGED_BASIC_RATES) + rtl8180_conf_basic_rates(dev, info->basic_rates); + + if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) { + + /* when preamble changes, acktime duration changes, and erp must + * be recalculated. ACK time is calculated at lowest rate. + * Since mac80211 include SIFS time we remove it (-10) + */ + priv->ack_time = + le16_to_cpu(ieee80211_generic_frame_duration(dev, + priv->vif, + NL80211_BAND_2GHZ, 10, + &priv->rates[0])) - 10; + + rtl8180_conf_erp(dev, info); + + /* mac80211 supplies aifs_n to driver and calls + * conf_tx callback whether aifs_n changes, NOT + * when aifs changes. + * Aifs should be recalculated if slot changes. + */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + for (i = 0; i < 4; i++) + rtl8187se_conf_ac_parm(dev, i); + } + } + + if (changed & BSS_CHANGED_BEACON_ENABLED) + vif_priv->enable_beacon = info->enable_beacon; + + if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) { + cancel_delayed_work_sync(&vif_priv->beacon_work); + if (vif_priv->enable_beacon) + schedule_work(&vif_priv->beacon_work.work); + } +} + +static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev, + struct netdev_hw_addr_list *mc_list) +{ + return netdev_hw_addr_list_count(mc_list); +} + +static void rtl8180_configure_filter(struct ieee80211_hw *dev, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast) +{ + struct rtl8180_priv *priv = dev->priv; + + if (changed_flags & FIF_FCSFAIL) + priv->rx_conf ^= RTL818X_RX_CONF_FCS; + if (changed_flags & FIF_CONTROL) + priv->rx_conf ^= RTL818X_RX_CONF_CTRL; + if (changed_flags & FIF_OTHER_BSS) + priv->rx_conf ^= RTL818X_RX_CONF_MONITOR; + if (*total_flags & FIF_ALLMULTI || multicast > 0) + priv->rx_conf |= RTL818X_RX_CONF_MULTICAST; + else + priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST; + + *total_flags = 0; + + if (priv->rx_conf & RTL818X_RX_CONF_FCS) + *total_flags |= FIF_FCSFAIL; + if (priv->rx_conf & RTL818X_RX_CONF_CTRL) + *total_flags |= FIF_CONTROL; + if (priv->rx_conf & RTL818X_RX_CONF_MONITOR) + *total_flags |= FIF_OTHER_BSS; + if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST) + *total_flags |= FIF_ALLMULTI; + + rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf); +} + +static const struct ieee80211_ops rtl8180_ops = { + .tx = rtl8180_tx, + .start = rtl8180_start, + .stop = rtl8180_stop, + .add_interface = rtl8180_add_interface, + .remove_interface = rtl8180_remove_interface, + .config = rtl8180_config, + .bss_info_changed = rtl8180_bss_info_changed, + .conf_tx = rtl8180_conf_tx, + .prepare_multicast = rtl8180_prepare_multicast, + .configure_filter = rtl8180_configure_filter, + .get_tsf = rtl8180_get_tsf, +}; + +static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom) +{ + struct rtl8180_priv *priv = eeprom->data; + u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + + eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE; + eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ; + eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK; + eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS; +} + +static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom) +{ + struct rtl8180_priv *priv = eeprom->data; + u8 reg = 2 << 6; + + if (eeprom->reg_data_in) + reg |= RTL818X_EEPROM_CMD_WRITE; + if (eeprom->reg_data_out) + reg |= RTL818X_EEPROM_CMD_READ; + if (eeprom->reg_data_clock) + reg |= RTL818X_EEPROM_CMD_CK; + if (eeprom->reg_chip_select) + reg |= RTL818X_EEPROM_CMD_CS; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); +} + +static void rtl8180_eeprom_read(struct rtl8180_priv *priv) +{ + struct eeprom_93cx6 eeprom; + int eeprom_cck_table_adr; + u16 eeprom_val; + int i; + + eeprom.data = priv; + eeprom.register_read = rtl8180_eeprom_register_read; + eeprom.register_write = rtl8180_eeprom_register_write; + if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) + eeprom.width = PCI_EEPROM_WIDTH_93C66; + else + eeprom.width = PCI_EEPROM_WIDTH_93C46; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_PROGRAM); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val); + eeprom_val &= 0xFF; + priv->rf_type = eeprom_val; + + eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val); + priv->csthreshold = eeprom_val >> 8; + + eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)priv->mac_addr, 3); + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + eeprom_cck_table_adr = 0x30; + else + eeprom_cck_table_adr = 0x10; + + /* CCK TX power */ + for (i = 0; i < 14; i += 2) { + u16 txpwr; + eeprom_93cx6_read(&eeprom, eeprom_cck_table_adr + (i >> 1), + &txpwr); + priv->channels[i].hw_value = txpwr & 0xFF; + priv->channels[i + 1].hw_value = txpwr >> 8; + } + + /* OFDM TX power */ + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { + for (i = 0; i < 14; i += 2) { + u16 txpwr; + eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr); + priv->channels[i].hw_value |= (txpwr & 0xFF) << 8; + priv->channels[i + 1].hw_value |= txpwr & 0xFF00; + } + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8180) { + __le32 anaparam; + eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2); + priv->anaparam = le32_to_cpu(anaparam); + eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam); + } + + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + eeprom_93cx6_read(&eeprom, 0x3F, &eeprom_val); + priv->antenna_diversity_en = !!(eeprom_val & 0x100); + priv->antenna_diversity_default = (eeprom_val & 0xC00) == 0x400; + + eeprom_93cx6_read(&eeprom, 0x7C, &eeprom_val); + priv->xtal_out = eeprom_val & 0xF; + priv->xtal_in = (eeprom_val & 0xF0) >> 4; + priv->xtal_cal = !!(eeprom_val & 0x1000); + priv->thermal_meter_val = (eeprom_val & 0xF00) >> 8; + priv->thermal_meter_en = !!(eeprom_val & 0x2000); + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); +} + +static int rtl8180_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct ieee80211_hw *dev; + struct rtl8180_priv *priv; + unsigned long mem_len; + unsigned int io_len; + int err; + const char *chip_name, *rf_name = NULL; + u32 reg; + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n", + pci_name(pdev)); + return err; + } + + err = pci_request_regions(pdev, KBUILD_MODNAME); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n", + pci_name(pdev)); + goto err_disable_dev; + } + + io_len = pci_resource_len(pdev, 0); + mem_len = pci_resource_len(pdev, 1); + + if (mem_len < sizeof(struct rtl818x_csr) || + io_len < sizeof(struct rtl818x_csr)) { + printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_free_reg; + } + + if ((err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) || + (err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)))) { + printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n", + pci_name(pdev)); + goto err_free_reg; + } + + pci_set_master(pdev); + + dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops); + if (!dev) { + printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n", + pci_name(pdev)); + err = -ENOMEM; + goto err_free_reg; + } + + priv = dev->priv; + priv->pdev = pdev; + + dev->max_rates = 1; + SET_IEEE80211_DEV(dev, &pdev->dev); + pci_set_drvdata(pdev, dev); + + priv->map_pio = false; + priv->map = pci_iomap(pdev, 1, mem_len); + if (!priv->map) { + priv->map = pci_iomap(pdev, 0, io_len); + priv->map_pio = true; + } + + if (!priv->map) { + dev_err(&pdev->dev, "Cannot map device memory/PIO\n"); + err = -ENOMEM; + goto err_free_dev; + } + + BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels)); + BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates)); + + memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels)); + memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates)); + + priv->band.band = NL80211_BAND_2GHZ; + priv->band.channels = priv->channels; + priv->band.n_channels = ARRAY_SIZE(rtl818x_channels); + priv->band.bitrates = priv->rates; + priv->band.n_bitrates = 4; + dev->wiphy->bands[NL80211_BAND_2GHZ] = &priv->band; + + ieee80211_hw_set(dev, HOST_BROADCAST_PS_BUFFERING); + ieee80211_hw_set(dev, RX_INCLUDES_FCS); + + dev->vif_data_size = sizeof(struct rtl8180_vif); + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC); + dev->max_signal = 65; + + reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); + reg &= RTL818X_TX_CONF_HWVER_MASK; + switch (reg) { + case RTL818X_TX_CONF_R8180_ABCD: + chip_name = "RTL8180"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180; + break; + + case RTL818X_TX_CONF_R8180_F: + chip_name = "RTL8180vF"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8180; + break; + + case RTL818X_TX_CONF_R8185_ABC: + chip_name = "RTL8185"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185; + break; + + case RTL818X_TX_CONF_R8185_D: + chip_name = "RTL8185vD"; + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8185; + break; + + case RTL818X_TX_CONF_RTL8187SE: + chip_name = "RTL8187SE"; + if (priv->map_pio) { + dev_err(&pdev->dev, + "MMIO failed. PIO not supported on RTL8187SE\n"); + err = -ENOMEM; + goto err_iounmap; + } + priv->chip_family = RTL818X_CHIP_FAMILY_RTL8187SE; + break; + + default: + printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n", + pci_name(pdev), reg >> 25); + err = -ENODEV; + goto err_iounmap; + } + + /* we declare to MAC80211 all the queues except for beacon queue + * that will be eventually handled by DRV. + * TX rings are arranged in such a way that lower is the IDX, + * higher is the priority, in order to achieve direct mapping + * with mac80211, however the beacon queue is an exception and it + * is mapped on the highst tx ring IDX. + */ + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + dev->queues = RTL8187SE_NR_TX_QUEUES - 1; + else + dev->queues = RTL8180_NR_TX_QUEUES - 1; + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) { + priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates); + pci_try_set_mwi(pdev); + } + + if (priv->chip_family != RTL818X_CHIP_FAMILY_RTL8180) + ieee80211_hw_set(dev, SIGNAL_DBM); + else + ieee80211_hw_set(dev, SIGNAL_UNSPEC); + + wiphy_ext_feature_set(dev->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); + + rtl8180_eeprom_read(priv); + + switch (priv->rf_type) { + case 1: rf_name = "Intersil"; + break; + case 2: rf_name = "RFMD"; + break; + case 3: priv->rf = &sa2400_rf_ops; + break; + case 4: priv->rf = &max2820_rf_ops; + break; + case 5: priv->rf = &grf5101_rf_ops; + break; + case 9: + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) + priv->rf = rtl8187se_detect_rf(dev); + else + priv->rf = rtl8180_detect_rf(dev); + break; + case 10: + rf_name = "RTL8255"; + break; + default: + printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n", + pci_name(pdev), priv->rf_type); + err = -ENODEV; + goto err_iounmap; + } + + if (!priv->rf) { + printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n", + pci_name(pdev), rf_name); + err = -ENODEV; + goto err_iounmap; + } + + if (!is_valid_ether_addr(priv->mac_addr)) { + printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using" + " randomly generated MAC addr\n", pci_name(pdev)); + eth_random_addr(priv->mac_addr); + } + SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr); + + spin_lock_init(&priv->lock); + + err = ieee80211_register_hw(dev); + if (err) { + printk(KERN_ERR "%s (rtl8180): Cannot register device\n", + pci_name(pdev)); + goto err_iounmap; + } + + wiphy_info(dev->wiphy, "hwaddr %pm, %s + %s\n", + priv->mac_addr, chip_name, priv->rf->name); + + return 0; + + err_iounmap: + pci_iounmap(pdev, priv->map); + + err_free_dev: + ieee80211_free_hw(dev); + + err_free_reg: + pci_release_regions(pdev); + + err_disable_dev: + pci_disable_device(pdev); + return err; +} + +static void rtl8180_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *dev = pci_get_drvdata(pdev); + struct rtl8180_priv *priv; + + if (!dev) + return; + + ieee80211_unregister_hw(dev); + + priv = dev->priv; + + pci_iounmap(pdev, priv->map); + pci_release_regions(pdev); + pci_disable_device(pdev); + ieee80211_free_hw(dev); +} + +#define rtl8180_suspend NULL +#define rtl8180_resume NULL + +static SIMPLE_DEV_PM_OPS(rtl8180_pm_ops, rtl8180_suspend, rtl8180_resume); + +static struct pci_driver rtl8180_driver = { + .name = KBUILD_MODNAME, + .id_table = rtl8180_table, + .probe = rtl8180_probe, + .remove = rtl8180_remove, + .driver.pm = &rtl8180_pm_ops, +}; + +module_pci_driver(rtl8180_driver); diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.c new file mode 100644 index 000000000..fda6ba796 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Radio tuning for GCT GRF5101 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "grf5101.h" + +static const int grf5101_encode[] = { + 0x0, 0x8, 0x4, 0xC, + 0x2, 0xA, 0x6, 0xE, + 0x1, 0x9, 0x5, 0xD, + 0x3, 0xB, 0x7, 0xF +}; + +static void write_grf5101(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8180_priv *priv = dev->priv; + u32 phy_config; + + phy_config = grf5101_encode[(data >> 8) & 0xF]; + phy_config |= grf5101_encode[(data >> 4) & 0xF] << 4; + phy_config |= grf5101_encode[data & 0xF] << 8; + phy_config |= grf5101_encode[(addr >> 1) & 0xF] << 12; + phy_config |= (addr & 1) << 16; + phy_config |= grf5101_encode[(data & 0xf000) >> 12] << 24; + + /* MAC will bang bits to the chip */ + phy_config |= 0x90000000; + + rtl818x_iowrite32(priv, + (__le32 __iomem *) &priv->map->RFPinsOutput, phy_config); + + msleep(3); +} + +static void grf5101_write_phy_antenna(struct ieee80211_hw *dev, short chan) +{ + struct rtl8180_priv *priv = dev->priv; + u8 ant = GRF5101_ANTENNA; + + if (priv->rfparam & RF_PARAM_ANTBDEFAULT) + ant |= BB_ANTENNA_B; + + if (chan == 14) + ant |= BB_ANTATTEN_CHAN14; + + rtl8180_write_phy(dev, 0x10, ant); +} + +static u8 grf5101_rf_calc_rssi(u8 agc, u8 sq) +{ + if (agc > 60) + return 65; + + /* TODO(?): just return agc (or agc + 5) to avoid mult / div */ + return 65 * agc / 60; +} + +static void grf5101_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + int channel = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); + u32 txpw = priv->channels[channel - 1].hw_value & 0xFF; + u32 chan = channel - 1; + + /* set TX power */ + write_grf5101(dev, 0x15, 0x0); + write_grf5101(dev, 0x06, txpw); + write_grf5101(dev, 0x15, 0x10); + write_grf5101(dev, 0x15, 0x0); + + /* set frequency */ + write_grf5101(dev, 0x07, 0x0); + write_grf5101(dev, 0x0B, chan); + write_grf5101(dev, 0x07, 0x1000); + + grf5101_write_phy_antenna(dev, channel); +} + +static void grf5101_rf_stop(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u32 anaparam; + + anaparam = priv->anaparam; + anaparam &= 0x000fffff; + anaparam |= 0x3f900000; + rtl8180_set_anaparam(priv, anaparam); + + write_grf5101(dev, 0x07, 0x0); + write_grf5101(dev, 0x1f, 0x45); + write_grf5101(dev, 0x1f, 0x5); + write_grf5101(dev, 0x00, 0x8e4); +} + +static void grf5101_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + + rtl8180_set_anaparam(priv, priv->anaparam); + + write_grf5101(dev, 0x1f, 0x0); + write_grf5101(dev, 0x1f, 0x0); + write_grf5101(dev, 0x1f, 0x40); + write_grf5101(dev, 0x1f, 0x60); + write_grf5101(dev, 0x1f, 0x61); + write_grf5101(dev, 0x1f, 0x61); + write_grf5101(dev, 0x00, 0xae4); + write_grf5101(dev, 0x1f, 0x1); + write_grf5101(dev, 0x1f, 0x41); + write_grf5101(dev, 0x1f, 0x61); + + write_grf5101(dev, 0x01, 0x1a23); + write_grf5101(dev, 0x02, 0x4971); + write_grf5101(dev, 0x03, 0x41de); + write_grf5101(dev, 0x04, 0x2d80); + write_grf5101(dev, 0x05, 0x68ff); /* 0x61ff original value */ + write_grf5101(dev, 0x06, 0x0); + write_grf5101(dev, 0x07, 0x0); + write_grf5101(dev, 0x08, 0x7533); + write_grf5101(dev, 0x09, 0xc401); + write_grf5101(dev, 0x0a, 0x0); + write_grf5101(dev, 0x0c, 0x1c7); + write_grf5101(dev, 0x0d, 0x29d3); + write_grf5101(dev, 0x0e, 0x2e8); + write_grf5101(dev, 0x10, 0x192); + write_grf5101(dev, 0x11, 0x248); + write_grf5101(dev, 0x12, 0x0); + write_grf5101(dev, 0x13, 0x20c4); + write_grf5101(dev, 0x14, 0xf4fc); + write_grf5101(dev, 0x15, 0x0); + write_grf5101(dev, 0x16, 0x1500); + + write_grf5101(dev, 0x07, 0x1000); + + /* baseband configuration */ + rtl8180_write_phy(dev, 0, 0xa8); + rtl8180_write_phy(dev, 3, 0x0); + rtl8180_write_phy(dev, 4, 0xc0); + rtl8180_write_phy(dev, 5, 0x90); + rtl8180_write_phy(dev, 6, 0x1e); + rtl8180_write_phy(dev, 7, 0x64); + + grf5101_write_phy_antenna(dev, 1); + + rtl8180_write_phy(dev, 0x11, 0x88); + + if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & + RTL818X_CONFIG2_ANTENNA_DIV) + rtl8180_write_phy(dev, 0x12, 0xc0); /* enable ant diversity */ + else + rtl8180_write_phy(dev, 0x12, 0x40); /* disable ant diversity */ + + rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold); + + rtl8180_write_phy(dev, 0x19, 0x0); + rtl8180_write_phy(dev, 0x1a, 0xa0); + rtl8180_write_phy(dev, 0x1b, 0x44); +} + +const struct rtl818x_rf_ops grf5101_rf_ops = { + .name = "GCT", + .init = grf5101_rf_init, + .stop = grf5101_rf_stop, + .set_chan = grf5101_rf_set_channel, + .calc_rssi = grf5101_rf_calc_rssi, +}; diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.h new file mode 100644 index 000000000..91ff3185c --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/grf5101.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef RTL8180_GRF5101_H +#define RTL8180_GRF5101_H + +/* + * Radio tuning for GCT GRF5101 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#define GRF5101_ANTENNA 0xA3 + +extern const struct rtl818x_rf_ops grf5101_rf_ops; + +#endif /* RTL8180_GRF5101_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.c new file mode 100644 index 000000000..27d04fec3 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Radio tuning for Maxim max2820 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "max2820.h" + +static const u32 max2820_chan[] = { + 12, /* CH 1 */ + 17, + 22, + 27, + 32, + 37, + 42, + 47, + 52, + 57, + 62, + 67, + 72, + 84, /* CH 14 */ +}; + +static void write_max2820(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8180_priv *priv = dev->priv; + u32 phy_config; + + phy_config = 0x90 + (data & 0xf); + phy_config <<= 16; + phy_config += addr; + phy_config <<= 8; + phy_config += (data >> 4) & 0xff; + + rtl818x_iowrite32(priv, + (__le32 __iomem *) &priv->map->RFPinsOutput, phy_config); + + msleep(1); +} + +static void max2820_write_phy_antenna(struct ieee80211_hw *dev, short chan) +{ + struct rtl8180_priv *priv = dev->priv; + u8 ant; + + ant = MAXIM_ANTENNA; + if (priv->rfparam & RF_PARAM_ANTBDEFAULT) + ant |= BB_ANTENNA_B; + if (chan == 14) + ant |= BB_ANTATTEN_CHAN14; + + rtl8180_write_phy(dev, 0x10, ant); +} + +static u8 max2820_rf_calc_rssi(u8 agc, u8 sq) +{ + bool odd; + + odd = !!(agc & 1); + + agc >>= 1; + if (odd) + agc += 76; + else + agc += 66; + + /* TODO: change addends above to avoid mult / div below */ + return 65 * agc / 100; +} + +static void max2820_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + int channel = conf ? + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq) : 1; + unsigned int chan_idx = channel - 1; + u32 txpw = priv->channels[chan_idx].hw_value & 0xFF; + u32 chan = max2820_chan[chan_idx]; + + /* While philips SA2400 drive the PA bias from + * sa2400, for MAXIM we do this directly from BB */ + rtl8180_write_phy(dev, 3, txpw); + + max2820_write_phy_antenna(dev, channel); + write_max2820(dev, 3, chan); +} + +static void max2820_rf_stop(struct ieee80211_hw *dev) +{ + rtl8180_write_phy(dev, 3, 0x8); + write_max2820(dev, 1, 0); +} + + +static void max2820_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + + /* MAXIM from netbsd driver */ + write_max2820(dev, 0, 0x007); /* test mode as indicated in datasheet */ + write_max2820(dev, 1, 0x01e); /* enable register */ + write_max2820(dev, 2, 0x001); /* synt register */ + + max2820_rf_set_channel(dev, NULL); + + write_max2820(dev, 4, 0x313); /* rx register */ + + /* PA is driven directly by the BB, we keep the MAXIM bias + * at the highest value in case that setting it to lower + * values may introduce some further attenuation somewhere.. + */ + write_max2820(dev, 5, 0x00f); + + /* baseband configuration */ + rtl8180_write_phy(dev, 0, 0x88); /* sys1 */ + rtl8180_write_phy(dev, 3, 0x08); /* txagc */ + rtl8180_write_phy(dev, 4, 0xf8); /* lnadet */ + rtl8180_write_phy(dev, 5, 0x90); /* ifagcinit */ + rtl8180_write_phy(dev, 6, 0x1a); /* ifagclimit */ + rtl8180_write_phy(dev, 7, 0x64); /* ifagcdet */ + + max2820_write_phy_antenna(dev, 1); + + rtl8180_write_phy(dev, 0x11, 0x88); /* trl */ + + if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & + RTL818X_CONFIG2_ANTENNA_DIV) + rtl8180_write_phy(dev, 0x12, 0xc7); + else + rtl8180_write_phy(dev, 0x12, 0x47); + + rtl8180_write_phy(dev, 0x13, 0x9b); + + rtl8180_write_phy(dev, 0x19, 0x0); /* CHESTLIM */ + rtl8180_write_phy(dev, 0x1a, 0x9f); /* CHSQLIM */ + + max2820_rf_set_channel(dev, NULL); +} + +const struct rtl818x_rf_ops max2820_rf_ops = { + .name = "Maxim", + .init = max2820_rf_init, + .stop = max2820_rf_stop, + .set_chan = max2820_rf_set_channel, + .calc_rssi = max2820_rf_calc_rssi, +}; diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.h new file mode 100644 index 000000000..4cb800d2d --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/max2820.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef RTL8180_MAX2820_H +#define RTL8180_MAX2820_H + +/* + * Radio tuning for Maxim max2820 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#define MAXIM_ANTENNA 0xb3 + +extern const struct rtl818x_rf_ops max2820_rf_ops; + +#endif /* RTL8180_MAX2820_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8180.h new file mode 100644 index 000000000..2ff00800d --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8180.h @@ -0,0 +1,186 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef RTL8180_H +#define RTL8180_H + +#include "rtl818x.h" + +#define MAX_RX_SIZE IEEE80211_MAX_RTS_THRESHOLD + +#define RF_PARAM_ANALOGPHY (1 << 0) +#define RF_PARAM_ANTBDEFAULT (1 << 1) +#define RF_PARAM_CARRIERSENSE1 (1 << 2) +#define RF_PARAM_CARRIERSENSE2 (1 << 3) + +#define BB_ANTATTEN_CHAN14 0x0C +#define BB_ANTENNA_B 0x40 + +#define BB_HOST_BANG (1 << 30) +#define BB_HOST_BANG_EN (1 << 2) +#define BB_HOST_BANG_CLK (1 << 1) +#define BB_HOST_BANG_DATA 1 + +#define ANAPARAM_TXDACOFF_SHIFT 27 +#define ANAPARAM_PWR0_SHIFT 28 +#define ANAPARAM_PWR0_MASK (0x07 << ANAPARAM_PWR0_SHIFT) +#define ANAPARAM_PWR1_SHIFT 20 +#define ANAPARAM_PWR1_MASK (0x7F << ANAPARAM_PWR1_SHIFT) + +/* rtl8180/rtl8185 have 3 queue + beacon queue. + * mac80211 can use just one, + beacon = 2 tot. + */ +#define RTL8180_NR_TX_QUEUES 2 + +/* rtl8187SE have 6 queues + beacon queues + * mac80211 can use 4 QoS data queue, + beacon = 5 tot + */ +#define RTL8187SE_NR_TX_QUEUES 5 + +/* for array static allocation, it is the max of above */ +#define RTL818X_NR_TX_QUEUES 5 + +struct rtl8180_tx_desc { + __le32 flags; + __le16 rts_duration; + __le16 plcp_len; + __le32 tx_buf; + union{ + __le32 frame_len; + struct { + __le16 frame_len_se; + __le16 frame_duration; + } __packed; + } __packed; + __le32 next_tx_desc; + u8 cw; + u8 retry_limit; + u8 agc; + u8 flags2; + /* rsvd for 8180/8185. + * valid for 8187se but we dont use it + */ + u32 reserved; + /* all rsvd for 8180/8185 */ + __le16 flags3; + __le16 frag_qsize; +} __packed; + +struct rtl818x_rx_cmd_desc { + __le32 flags; + u32 reserved; + __le32 rx_buf; +} __packed; + +struct rtl8180_rx_desc { + __le32 flags; + __le32 flags2; + __le64 tsft; + +} __packed; + +struct rtl8187se_rx_desc { + __le32 flags; + __le64 tsft; + __le32 flags2; + __le32 flags3; + u32 reserved[3]; +} __packed; + +struct rtl8180_tx_ring { + struct rtl8180_tx_desc *desc; + dma_addr_t dma; + unsigned int idx; + unsigned int entries; + struct sk_buff_head queue; +}; + +struct rtl8180_vif { + struct ieee80211_hw *dev; + + /* beaconing */ + struct delayed_work beacon_work; + bool enable_beacon; +}; + +struct rtl8180_priv { + /* common between rtl818x drivers */ + struct rtl818x_csr __iomem *map; + const struct rtl818x_rf_ops *rf; + struct ieee80211_vif *vif; + + /* rtl8180 driver specific */ + bool map_pio; + spinlock_t lock; + void *rx_ring; + u8 rx_ring_sz; + dma_addr_t rx_ring_dma; + unsigned int rx_idx; + struct sk_buff *rx_buf[32]; + struct rtl8180_tx_ring tx_ring[RTL818X_NR_TX_QUEUES]; + struct ieee80211_channel channels[14]; + struct ieee80211_rate rates[12]; + struct ieee80211_supported_band band; + struct ieee80211_tx_queue_params queue_param[4]; + struct pci_dev *pdev; + u32 rx_conf; + u8 slot_time; + u16 ack_time; + + enum { + RTL818X_CHIP_FAMILY_RTL8180, + RTL818X_CHIP_FAMILY_RTL8185, + RTL818X_CHIP_FAMILY_RTL8187SE, + } chip_family; + u32 anaparam; + u16 rfparam; + u8 csthreshold; + u8 mac_addr[ETH_ALEN]; + u8 rf_type; + u8 xtal_out; + u8 xtal_in; + u8 xtal_cal; + u8 thermal_meter_val; + u8 thermal_meter_en; + u8 antenna_diversity_en; + u8 antenna_diversity_default; + /* sequence # */ + u16 seqno; +}; + +void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); +void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam); +void rtl8180_set_anaparam2(struct rtl8180_priv *priv, u32 anaparam2); + +static inline u8 rtl818x_ioread8(struct rtl8180_priv *priv, const u8 __iomem *addr) +{ + return ioread8(addr); +} + +static inline u16 rtl818x_ioread16(struct rtl8180_priv *priv, const __le16 __iomem *addr) +{ + return ioread16(addr); +} + +static inline u32 rtl818x_ioread32(struct rtl8180_priv *priv, const __le32 __iomem *addr) +{ + return ioread32(addr); +} + +static inline void rtl818x_iowrite8(struct rtl8180_priv *priv, + u8 __iomem *addr, u8 val) +{ + iowrite8(val, addr); +} + +static inline void rtl818x_iowrite16(struct rtl8180_priv *priv, + __le16 __iomem *addr, u16 val) +{ + iowrite16(val, addr); +} + +static inline void rtl818x_iowrite32(struct rtl8180_priv *priv, + __le32 __iomem *addr, u32 val) +{ + iowrite32(val, addr); +} + +#endif /* RTL8180_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.c new file mode 100644 index 000000000..470a869e6 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.c @@ -0,0 +1,767 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Radio tuning for RTL8225 on RTL8180 + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8180 driver, which is: + * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al. + * + * Thanks to Realtek for their support! + */ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "rtl8225.h" + +static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg80, reg84, reg82; + u32 bangdata; + int i; + + bangdata = (data << 4) | (addr & 0xf); + + reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3; + reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable); + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7); + + reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7 | 0x400); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + for (i = 15; i >= 0; i--) { + u16 reg = reg80; + + if (bangdata & (1 << i)) + reg |= 1; + + if (i & 1) + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1)); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1)); + + if (!(i & 1)) + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(10); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x400); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); +} + +static u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg80, reg82, reg84, out; + int i; + + reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput); + reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable); + reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect) | 0x400; + + reg80 &= ~0xF; + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(4); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(5); + + for (i = 4; i >= 0; i--) { + u16 reg = reg80 | ((addr >> i) & 1); + + if (!(i & 1)) { + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(1); + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + + if (i & 1) { + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(1); + } + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x000E); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x040E); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + + out = 0; + for (i = 11; i >= 0; i--) { + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(1); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + + if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1)) + out |= 1 << i; + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 2)); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + udelay(2); + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0); + + return out; +} + +static const u16 rtl8225bcd_rxgain[] = { + 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409, + 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541, + 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583, + 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644, + 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688, + 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745, + 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789, + 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793, + 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d, + 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9, + 0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3, + 0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb +}; + +static const u8 rtl8225_agc[] = { + 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, + 0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96, + 0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e, + 0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86, + 0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e, + 0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36, + 0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e, + 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26, + 0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e, + 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16, + 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e, + 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06, + 0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01 +}; + +static const u8 rtl8225_gain[] = { + 0x23, 0x88, 0x7c, 0xa5, /* -82dbm */ + 0x23, 0x88, 0x7c, 0xb5, /* -82dbm */ + 0x23, 0x88, 0x7c, 0xc5, /* -82dbm */ + 0x33, 0x80, 0x79, 0xc5, /* -78dbm */ + 0x43, 0x78, 0x76, 0xc5, /* -74dbm */ + 0x53, 0x60, 0x73, 0xc5, /* -70dbm */ + 0x63, 0x58, 0x70, 0xc5, /* -66dbm */ +}; + +static const u8 rtl8225_threshold[] = { + 0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd +}; + +static const u8 rtl8225_tx_gain_cck_ofdm[] = { + 0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e +}; + +static const u8 rtl8225_tx_power_cck[] = { + 0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02, + 0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02, + 0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02, + 0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02, + 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03, + 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03 +}; + +static const u8 rtl8225_tx_power_cck_ch14[] = { + 0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00, + 0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00, + 0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00, + 0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00, + 0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00, + 0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00 +}; + +static const u8 rtl8225_tx_power_ofdm[] = { + 0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4 +}; + +static const u32 rtl8225_chan[] = { + 0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c, + 0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72 +}; + +static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel) +{ + struct rtl8180_priv *priv = dev->priv; + u8 cck_power, ofdm_power; + const u8 *tmp; + u32 reg; + int i; + + cck_power = priv->channels[channel - 1].hw_value & 0xFF; + ofdm_power = priv->channels[channel - 1].hw_value >> 8; + + cck_power = min(cck_power, (u8)35); + ofdm_power = min(ofdm_power, (u8)35); + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, + rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1); + + if (channel == 14) + tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8]; + else + tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8]; + + for (i = 0; i < 8; i++) + rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++); + + msleep(1); /* FIXME: optional? */ + + /* TODO: use set_anaparam2 dev.c_func*/ + /* anaparam2 on */ + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, + rtl8225_tx_gain_cck_ofdm[ofdm_power/6] >> 1); + + tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6]; + + rtl8225_write_phy_ofdm(dev, 5, *tmp); + rtl8225_write_phy_ofdm(dev, 7, *tmp); + + msleep(1); +} + +static void rtl8225_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + + rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON); + + /* host_pci_init */ + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + msleep(200); /* FIXME: ehh?? */ + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6)); + + rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008); + + /* TODO: check if we need really to change BRSR to do RF config */ + rtl818x_ioread16(priv, &priv->map->BRSR); + rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF); + rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + rtl8225_write(dev, 0x0, 0x067); + rtl8225_write(dev, 0x1, 0xFE0); + rtl8225_write(dev, 0x2, 0x44D); + rtl8225_write(dev, 0x3, 0x441); + rtl8225_write(dev, 0x4, 0x8BE); + rtl8225_write(dev, 0x5, 0xBF0); /* TODO: minipci */ + rtl8225_write(dev, 0x6, 0xAE6); + rtl8225_write(dev, 0x7, rtl8225_chan[0]); + rtl8225_write(dev, 0x8, 0x01F); + rtl8225_write(dev, 0x9, 0x334); + rtl8225_write(dev, 0xA, 0xFD4); + rtl8225_write(dev, 0xB, 0x391); + rtl8225_write(dev, 0xC, 0x050); + rtl8225_write(dev, 0xD, 0x6DB); + rtl8225_write(dev, 0xE, 0x029); + rtl8225_write(dev, 0xF, 0x914); msleep(1); + + rtl8225_write(dev, 0x2, 0xC4D); msleep(100); + + rtl8225_write(dev, 0x0, 0x127); + + for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) { + rtl8225_write(dev, 0x1, i + 1); + rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]); + } + + rtl8225_write(dev, 0x0, 0x027); + rtl8225_write(dev, 0x0, 0x22F); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + + for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) { + rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]); + msleep(1); + rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i); + msleep(1); + } + + msleep(1); + + rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x06, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x08, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x11, 0x03); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1); + + rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1); + rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1); + rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1); + rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1); + rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1); + rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1); + rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1); + rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1); + rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1); + rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1); + rtl8225_write_phy_cck(dev, 0x13, 0xd0); + rtl8225_write_phy_cck(dev, 0x19, 0x00); + rtl8225_write_phy_cck(dev, 0x1a, 0xa0); + rtl8225_write_phy_cck(dev, 0x1b, 0x08); + rtl8225_write_phy_cck(dev, 0x40, 0x86); + rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1); + rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1); + rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1); + rtl8225_write_phy_cck(dev, 0x44, 0x1f); msleep(1); + rtl8225_write_phy_cck(dev, 0x45, 0x1e); msleep(1); + rtl8225_write_phy_cck(dev, 0x46, 0x1a); msleep(1); + rtl8225_write_phy_cck(dev, 0x47, 0x15); msleep(1); + rtl8225_write_phy_cck(dev, 0x48, 0x10); msleep(1); + rtl8225_write_phy_cck(dev, 0x49, 0x0a); msleep(1); + rtl8225_write_phy_cck(dev, 0x4a, 0x05); msleep(1); + rtl8225_write_phy_cck(dev, 0x4b, 0x02); msleep(1); + rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1); + + rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D); msleep(1); + + rtl8225_rf_set_tx_power(dev, 1); + + /* RX antenna default to A */ + rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1); /* B: 0xDB */ + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); /* B: 0x10 */ + + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */ + msleep(1); + rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + + rtl8225_write(dev, 0x0c, 0x50); + /* set OFDM initial gain */ + rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[4 * 4]); + rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[4 * 4 + 1]); + rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[4 * 4 + 2]); + rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[4 * 4 + 3]); + /* set CCK threshold */ + rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[0]); +} + +static const u8 rtl8225z2_tx_power_cck_ch14[] = { + 0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00 +}; + +static const u8 rtl8225z2_tx_power_cck_B[] = { + 0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x04 +}; + +static const u8 rtl8225z2_tx_power_cck_A[] = { + 0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04 +}; + +static const u8 rtl8225z2_tx_power_cck[] = { + 0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04 +}; + +static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) +{ + struct rtl8180_priv *priv = dev->priv; + u8 cck_power, ofdm_power; + const u8 *tmp; + int i; + + cck_power = priv->channels[channel - 1].hw_value & 0xFF; + ofdm_power = priv->channels[channel - 1].hw_value >> 8; + + if (channel == 14) + tmp = rtl8225z2_tx_power_cck_ch14; + else if (cck_power == 12) + tmp = rtl8225z2_tx_power_cck_B; + else if (cck_power == 13) + tmp = rtl8225z2_tx_power_cck_A; + else + tmp = rtl8225z2_tx_power_cck; + + for (i = 0; i < 8; i++) + rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++); + + cck_power = min(cck_power, (u8)35); + if (cck_power == 13 || cck_power == 14) + cck_power = 12; + if (cck_power >= 15) + cck_power -= 2; + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, cck_power); + rtl818x_ioread8(priv, &priv->map->TX_GAIN_CCK); + msleep(1); + + ofdm_power = min(ofdm_power, (u8)35); + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, ofdm_power); + + rtl8225_write_phy_ofdm(dev, 2, 0x62); + rtl8225_write_phy_ofdm(dev, 5, 0x00); + rtl8225_write_phy_ofdm(dev, 6, 0x40); + rtl8225_write_phy_ofdm(dev, 7, 0x00); + rtl8225_write_phy_ofdm(dev, 8, 0x40); + + msleep(1); +} + +static const u16 rtl8225z2_rxgain[] = { + 0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0008, 0x0009, + 0x000a, 0x000b, 0x0102, 0x0103, 0x0104, 0x0105, 0x0140, 0x0141, + 0x0142, 0x0143, 0x0144, 0x0145, 0x0180, 0x0181, 0x0182, 0x0183, + 0x0184, 0x0185, 0x0188, 0x0189, 0x018a, 0x018b, 0x0243, 0x0244, + 0x0245, 0x0280, 0x0281, 0x0282, 0x0283, 0x0284, 0x0285, 0x0288, + 0x0289, 0x028a, 0x028b, 0x028c, 0x0342, 0x0343, 0x0344, 0x0345, + 0x0380, 0x0381, 0x0382, 0x0383, 0x0384, 0x0385, 0x0388, 0x0389, + 0x038a, 0x038b, 0x038c, 0x038d, 0x0390, 0x0391, 0x0392, 0x0393, + 0x0394, 0x0395, 0x0398, 0x0399, 0x039a, 0x039b, 0x039c, 0x039d, + 0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a8, 0x03a9, + 0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3, + 0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb +}; + +static void rtl8225z2_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + + rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON); + + /* host_pci_init */ + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + msleep(200); /* FIXME: ehh?? */ + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6)); + + rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00088008); + + /* TODO: check if we need really to change BRSR to do RF config */ + rtl818x_ioread16(priv, &priv->map->BRSR); + rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF); + rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + + rtl8225_write(dev, 0x0, 0x0B7); msleep(1); + rtl8225_write(dev, 0x1, 0xEE0); msleep(1); + rtl8225_write(dev, 0x2, 0x44D); msleep(1); + rtl8225_write(dev, 0x3, 0x441); msleep(1); + rtl8225_write(dev, 0x4, 0x8C3); msleep(1); + rtl8225_write(dev, 0x5, 0xC72); msleep(1); + rtl8225_write(dev, 0x6, 0x0E6); msleep(1); + rtl8225_write(dev, 0x7, 0x82A); msleep(1); + rtl8225_write(dev, 0x8, 0x03F); msleep(1); + rtl8225_write(dev, 0x9, 0x335); msleep(1); + rtl8225_write(dev, 0xa, 0x9D4); msleep(1); + rtl8225_write(dev, 0xb, 0x7BB); msleep(1); + rtl8225_write(dev, 0xc, 0x850); msleep(1); + rtl8225_write(dev, 0xd, 0xCDF); msleep(1); + rtl8225_write(dev, 0xe, 0x02B); msleep(1); + rtl8225_write(dev, 0xf, 0x114); msleep(100); + + if (!(rtl8225_read(dev, 6) & (1 << 7))) { + rtl8225_write(dev, 0x02, 0x0C4D); + msleep(200); + rtl8225_write(dev, 0x02, 0x044D); + msleep(100); + /* TODO: readd calibration failure message when the calibration + check works */ + } + + rtl8225_write(dev, 0x0, 0x1B7); + rtl8225_write(dev, 0x3, 0x002); + rtl8225_write(dev, 0x5, 0x004); + + for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) { + rtl8225_write(dev, 0x1, i + 1); + rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]); + } + + rtl8225_write(dev, 0x0, 0x0B7); msleep(100); + rtl8225_write(dev, 0x2, 0xC4D); + + msleep(200); + rtl8225_write(dev, 0x2, 0x44D); + msleep(100); + + rtl8225_write(dev, 0x00, 0x2BF); + rtl8225_write(dev, 0xFF, 0xFFFF); + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + + for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) { + rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]); + msleep(1); + rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i); + msleep(1); + } + + msleep(1); + + rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0d, 0x43); + rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x11, 0x06); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1b, 0x11); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1e, 0xb3); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x23, 0x80); msleep(1); /* FIXME: not needed? */ + rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); + rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1); + + rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1); + rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1); + rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1); + rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1); + rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1); + rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1); + rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1); + rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1); + rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1); + rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1); + rtl8225_write_phy_cck(dev, 0x13, 0xd0); + rtl8225_write_phy_cck(dev, 0x19, 0x00); + rtl8225_write_phy_cck(dev, 0x1a, 0xa0); + rtl8225_write_phy_cck(dev, 0x1b, 0x08); + rtl8225_write_phy_cck(dev, 0x40, 0x86); + rtl8225_write_phy_cck(dev, 0x41, 0x8a); msleep(1); + rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1); + rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1); + rtl8225_write_phy_cck(dev, 0x44, 0x36); msleep(1); + rtl8225_write_phy_cck(dev, 0x45, 0x35); msleep(1); + rtl8225_write_phy_cck(dev, 0x46, 0x2e); msleep(1); + rtl8225_write_phy_cck(dev, 0x47, 0x25); msleep(1); + rtl8225_write_phy_cck(dev, 0x48, 0x1c); msleep(1); + rtl8225_write_phy_cck(dev, 0x49, 0x12); msleep(1); + rtl8225_write_phy_cck(dev, 0x4a, 0x09); msleep(1); + rtl8225_write_phy_cck(dev, 0x4b, 0x04); msleep(1); + rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1); + + rtl818x_iowrite8(priv, (u8 __iomem *)((void __iomem *)priv->map + 0x5B), 0x0D); msleep(1); + + rtl8225z2_rf_set_tx_power(dev, 1); + + /* RX antenna default to A */ + rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1); /* B: 0xDB */ + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); /* B: 0x10 */ + + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */ + msleep(1); + rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); +} + +static void rtl8225_rf_stop(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u8 reg; + + rtl8225_write(dev, 0x4, 0x1f); msleep(1); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_OFF); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_OFF); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); +} + +static void rtl8225_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + int chan = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); + + if (priv->rf->init == rtl8225_rf_init) + rtl8225_rf_set_tx_power(dev, chan); + else + rtl8225z2_rf_set_tx_power(dev, chan); + + rtl8225_write(dev, 0x7, rtl8225_chan[chan - 1]); + msleep(10); +} + +static const struct rtl818x_rf_ops rtl8225_ops = { + .name = "rtl8225", + .init = rtl8225_rf_init, + .stop = rtl8225_rf_stop, + .set_chan = rtl8225_rf_set_channel, +}; + +static const struct rtl818x_rf_ops rtl8225z2_ops = { + .name = "rtl8225z2", + .init = rtl8225z2_rf_init, + .stop = rtl8225_rf_stop, + .set_chan = rtl8225_rf_set_channel, +}; + +const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u16 reg8, reg9; + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + msleep(100); + + rtl8225_write(dev, 0, 0x1B7); + + reg8 = rtl8225_read(dev, 8); + reg9 = rtl8225_read(dev, 9); + + rtl8225_write(dev, 0, 0x0B7); + + if (reg8 != 0x588 || reg9 != 0x700) + return &rtl8225_ops; + + return &rtl8225z2_ops; +} diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.h new file mode 100644 index 000000000..de7727b74 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef RTL8180_RTL8225_H +#define RTL8180_RTL8225_H + +#define RTL8225_ANAPARAM_ON 0xa0000b59 +#define RTL8225_ANAPARAM2_ON 0x860dec11 +#define RTL8225_ANAPARAM_OFF 0xa00beb59 +#define RTL8225_ANAPARAM2_OFF 0x840dec11 + +const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *); + +static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev, + u8 addr, u8 data) +{ + rtl8180_write_phy(dev, addr, data); +} + +static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev, + u8 addr, u8 data) +{ + rtl8180_write_phy(dev, addr, data | 0x10000); +} + +#endif /* RTL8180_RTL8225_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.c new file mode 100644 index 000000000..e1bf41c27 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.c @@ -0,0 +1,430 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* Radio tuning for RTL8225 on RTL8187SE + * + * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net> + * Copyright 2014 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8180 and Realtek r8187se drivers, which are: + * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al. + * + * Also based on the rtl8187 driver, which is: + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + */ + +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "rtl8225se.h" + +#define PFX "rtl8225 (se) " + +static const u32 RF_GAIN_TABLE[] = { + 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6, + 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057, + 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3, + 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3, + 0x0183, 0x0163, 0x0143, 0x0123, 0x0103 +}; + +static const u8 cck_ofdm_gain_settings[] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, + 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, + 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, + 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, + 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, +}; + +static const u32 rtl8225se_chan[] = { + 0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380, + 0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A, +}; + +static const u8 ZEBRA_AGC[] = { + 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, + 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72, + 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, + 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, + 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, + 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07, + 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, + 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, + 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, + 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, + 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, + 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24, + 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, + 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F +}; + +static const u8 OFDM_CONFIG[] = { + 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50, + 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00, + 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26, + 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB, + 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00, + 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00, + 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e, + 0xD8, 0x3C, 0x7B, 0x10, 0x10 +}; + +static void rtl8187se_three_wire_io(struct ieee80211_hw *dev, u8 *data, + u8 len, bool write) +{ + struct rtl8180_priv *priv = dev->priv; + int i; + u8 tmp; + + do { + for (i = 0; i < 5; i++) { + tmp = rtl818x_ioread8(priv, SW_3W_CMD1); + if (!(tmp & 0x3)) + break; + udelay(10); + } + if (i == 5) + wiphy_err(dev->wiphy, PFX + "CmdReg: 0x%x RE/WE bits aren't clear\n", tmp); + + tmp = rtl818x_ioread8(priv, &priv->map->rf_sw_config) | 0x02; + rtl818x_iowrite8(priv, &priv->map->rf_sw_config, tmp); + + tmp = rtl818x_ioread8(priv, REG_ADDR1(0x84)) & 0xF7; + rtl818x_iowrite8(priv, REG_ADDR1(0x84), tmp); + if (write) { + if (len == 16) { + rtl818x_iowrite16(priv, SW_3W_DB0, + *(u16 *)data); + } else if (len == 64) { + rtl818x_iowrite32(priv, SW_3W_DB0_4, + *((u32 *)data)); + rtl818x_iowrite32(priv, SW_3W_DB1_4, + *((u32 *)(data + 4))); + } else + wiphy_err(dev->wiphy, PFX + "Unimplemented length\n"); + } else { + rtl818x_iowrite16(priv, SW_3W_DB0, *(u16 *)data); + } + if (write) + tmp = 2; + else + tmp = 1; + rtl818x_iowrite8(priv, SW_3W_CMD1, tmp); + for (i = 0; i < 5; i++) { + tmp = rtl818x_ioread8(priv, SW_3W_CMD1); + if (!(tmp & 0x3)) + break; + udelay(10); + } + rtl818x_iowrite8(priv, SW_3W_CMD1, 0); + if (!write) { + *((u16 *)data) = rtl818x_ioread16(priv, SI_DATA_REG); + *((u16 *)data) &= 0x0FFF; + } + } while (0); +} + +static u32 rtl8187se_rf_readreg(struct ieee80211_hw *dev, u8 addr) +{ + u32 dataread = addr & 0x0F; + rtl8187se_three_wire_io(dev, (u8 *)&dataread, 16, 0); + return dataread; +} + +static void rtl8187se_rf_writereg(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + u32 outdata = (data << 4) | (u32)(addr & 0x0F); + rtl8187se_three_wire_io(dev, (u8 *)&outdata, 16, 1); +} + + +static void rtl8225se_write_zebra_agc(struct ieee80211_hw *dev) +{ + int i; + + for (i = 0; i < 128; i++) { + rtl8225se_write_phy_ofdm(dev, 0xF, ZEBRA_AGC[i]); + rtl8225se_write_phy_ofdm(dev, 0xE, i+0x80); + rtl8225se_write_phy_ofdm(dev, 0xE, 0); + } +} + +static void rtl8187se_write_ofdm_config(struct ieee80211_hw *dev) +{ + /* write OFDM_CONFIG table */ + int i; + + for (i = 0; i < 60; i++) + rtl8225se_write_phy_ofdm(dev, i, OFDM_CONFIG[i]); + +} + +static void rtl8225sez2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) +{ + struct rtl8180_priv *priv = dev->priv; + u8 cck_power, ofdm_power; + + cck_power = priv->channels[channel - 1].hw_value & 0xFF; + if (cck_power > 35) + cck_power = 35; + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, + cck_ofdm_gain_settings[cck_power]); + + usleep_range(1000, 5000); + ofdm_power = priv->channels[channel - 1].hw_value >> 8; + if (ofdm_power > 35) + ofdm_power = 35; + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, + cck_ofdm_gain_settings[ofdm_power]); + if (ofdm_power < 12) { + rtl8225se_write_phy_ofdm(dev, 7, 0x5C); + rtl8225se_write_phy_ofdm(dev, 9, 0x5C); + } + if (ofdm_power < 18) { + rtl8225se_write_phy_ofdm(dev, 7, 0x54); + rtl8225se_write_phy_ofdm(dev, 9, 0x54); + } else { + rtl8225se_write_phy_ofdm(dev, 7, 0x50); + rtl8225se_write_phy_ofdm(dev, 9, 0x50); + } + + usleep_range(1000, 5000); +} + +static void rtl8187se_write_rf_gain(struct ieee80211_hw *dev) +{ + int i; + + for (i = 0; i <= 36; i++) { + rtl8187se_rf_writereg(dev, 0x01, i); mdelay(1); + rtl8187se_rf_writereg(dev, 0x02, RF_GAIN_TABLE[i]); mdelay(1); + } +} + +static void rtl8187se_write_initial_gain(struct ieee80211_hw *dev, + int init_gain) +{ + switch (init_gain) { + default: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x26); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1); + break; + case 2: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1); + break; + case 3: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); + break; + case 4: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); + break; + case 5: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); + break; + case 6: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); + break; + case 7: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0xA6); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); + break; + case 8: + rtl8225se_write_phy_ofdm(dev, 0x17, 0x66); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x24, 0xB6); mdelay(1); + rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); + break; + } +} + +void rtl8225se_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u32 rf23, rf24; + u8 d_cut = 0; + u8 tmp; + + /* Page 1 */ + rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1); + rf23 = rtl8187se_rf_readreg(dev, 0x08); mdelay(1); + rf24 = rtl8187se_rf_readreg(dev, 0x09); mdelay(1); + if (rf23 == 0x0818 && rf24 == 0x070C) + d_cut = 1; + + wiphy_info(dev->wiphy, "RTL8225-SE version %s\n", + d_cut ? "D" : "not-D"); + + /* Page 0: reg 0 - 15 */ + rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1); + rtl8187se_rf_writereg(dev, 0x01, 0x06E0); mdelay(1); + rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1); + rtl8187se_rf_writereg(dev, 0x03, 0x07F1); mdelay(1); + rtl8187se_rf_writereg(dev, 0x04, 0x0975); mdelay(1); + rtl8187se_rf_writereg(dev, 0x05, 0x0C72); mdelay(1); + rtl8187se_rf_writereg(dev, 0x06, 0x0AE6); mdelay(1); + rtl8187se_rf_writereg(dev, 0x07, 0x00CA); mdelay(1); + rtl8187se_rf_writereg(dev, 0x08, 0x0E1C); mdelay(1); + rtl8187se_rf_writereg(dev, 0x09, 0x02F0); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0A, 0x09D0); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0B, 0x01BA); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0C, 0x0640); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0E, 0x0020); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0F, 0x0990); mdelay(1); + /* page 1: reg 16-30 */ + rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1); + rtl8187se_rf_writereg(dev, 0x03, 0x0806); mdelay(1); + rtl8187se_rf_writereg(dev, 0x04, 0x03A7); mdelay(1); + rtl8187se_rf_writereg(dev, 0x05, 0x059B); mdelay(1); + rtl8187se_rf_writereg(dev, 0x06, 0x0081); mdelay(1); + rtl8187se_rf_writereg(dev, 0x07, 0x01A0); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0B, 0x0418); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0C, 0x0FBE); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(1); + if (d_cut) + rtl8187se_rf_writereg(dev, 0x0E, 0x0807); + else + rtl8187se_rf_writereg(dev, 0x0E, 0x0806); + mdelay(1); + rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); mdelay(1); + rtl8187se_rf_writereg(dev, 0x00, 0x01D7); mdelay(1); + rtl8187se_rf_writereg(dev, 0x03, 0x0E00); mdelay(1); + rtl8187se_rf_writereg(dev, 0x04, 0x0E50); mdelay(1); + + rtl8187se_write_rf_gain(dev); + + rtl8187se_rf_writereg(dev, 0x05, 0x0203); mdelay(1); + rtl8187se_rf_writereg(dev, 0x06, 0x0200); mdelay(1); + rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11); + rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(11); + rtl8187se_rf_writereg(dev, 0x00, 0x0037); mdelay(11); + rtl8187se_rf_writereg(dev, 0x04, 0x0160); mdelay(11); + rtl8187se_rf_writereg(dev, 0x07, 0x0080); mdelay(11); + rtl8187se_rf_writereg(dev, 0x02, 0x088D); msleep(221); + rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11); + rtl8187se_rf_writereg(dev, 0x07, 0x0000); mdelay(1); + rtl8187se_rf_writereg(dev, 0x07, 0x0180); mdelay(1); + rtl8187se_rf_writereg(dev, 0x07, 0x0220); mdelay(1); + rtl8187se_rf_writereg(dev, 0x07, 0x03E0); mdelay(1); + rtl8187se_rf_writereg(dev, 0x06, 0x00C1); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1); + if (priv->xtal_cal) { + tmp = (priv->xtal_in << 4) | (priv->xtal_out << 1) | + (1 << 11) | (1 << 9); + rtl8187se_rf_writereg(dev, 0x0F, tmp); + wiphy_info(dev->wiphy, "Xtal cal\n"); + mdelay(1); + } else { + wiphy_info(dev->wiphy, "NO Xtal cal\n"); + rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); + mdelay(1); + } + /* page 0 */ + rtl8187se_rf_writereg(dev, 0x00, 0x00BF); mdelay(1); + rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1); + rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1); + rtl8187se_rf_writereg(dev, 0x04, 0x0975); msleep(31); + rtl8187se_rf_writereg(dev, 0x00, 0x0197); mdelay(1); + rtl8187se_rf_writereg(dev, 0x05, 0x05AB); mdelay(1); + + rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1); + rtl8187se_rf_writereg(dev, 0x01, 0x0000); mdelay(1); + rtl8187se_rf_writereg(dev, 0x02, 0x0000); mdelay(1); + /* power save parameters */ + /* TODO: move to dev.c */ + rtl818x_iowrite8(priv, REG_ADDR1(0x024E), + rtl818x_ioread8(priv, REG_ADDR1(0x24E)) & 0x9F); + rtl8225se_write_phy_cck(dev, 0x00, 0xC8); + rtl8225se_write_phy_cck(dev, 0x06, 0x1C); + rtl8225se_write_phy_cck(dev, 0x10, 0x78); + rtl8225se_write_phy_cck(dev, 0x2E, 0xD0); + rtl8225se_write_phy_cck(dev, 0x2F, 0x06); + rtl8225se_write_phy_cck(dev, 0x01, 0x46); + + /* power control */ + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x10); + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x1B); + + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); + rtl8225se_write_phy_ofdm(dev, 0x00, 0x12); + + rtl8225se_write_zebra_agc(dev); + + rtl8225se_write_phy_ofdm(dev, 0x10, 0x00); + + rtl8187se_write_ofdm_config(dev); + + /* turn on RF */ + rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500); + rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500); + /* turn on RF again */ + rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500); + rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500); + /* turn on BB */ + rtl8225se_write_phy_ofdm(dev, 0x10, 0x40); + rtl8225se_write_phy_ofdm(dev, 0x12, 0x40); + + rtl8187se_write_initial_gain(dev, 4); +} + +void rtl8225se_rf_stop(struct ieee80211_hw *dev) +{ + /* checked for 8187se */ + struct rtl8180_priv *priv = dev->priv; + + /* turn off BB RXIQ matrix to cut off rx signal */ + rtl8225se_write_phy_ofdm(dev, 0x10, 0x00); + rtl8225se_write_phy_ofdm(dev, 0x12, 0x00); + /* turn off RF */ + rtl8187se_rf_writereg(dev, 0x04, 0x0000); + rtl8187se_rf_writereg(dev, 0x00, 0x0000); + + usleep_range(1000, 5000); + /* turn off A/D and D/A */ + rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_OFF); + rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_OFF); +} + +void rtl8225se_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + int chan = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); + + rtl8225sez2_rf_set_tx_power(dev, chan); + rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]); + if ((rtl8187se_rf_readreg(dev, 0x7) & 0x0F80) != + rtl8225se_chan[chan - 1]) + rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]); + usleep_range(10000, 20000); +} + +static const struct rtl818x_rf_ops rtl8225se_ops = { + .name = "rtl8225-se", + .init = rtl8225se_rf_init, + .stop = rtl8225se_rf_stop, + .set_chan = rtl8225se_rf_set_channel, +}; + +const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *dev) +{ + return &rtl8225se_ops; +} diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.h new file mode 100644 index 000000000..f00972661 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl8225se.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* Definitions for RTL8187SE hardware + * + * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net> + * Copyright 2014 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8180 and Realtek r8187se drivers, which are: + * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al. + * + * Also based on the rtl8187 driver, which is: + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + */ + +#ifndef RTL8187SE_RTL8225_H +#define RTL8187SE_RTL8225_H + +#define RTL8225SE_ANAPARAM_ON 0xb0054d00 +#define RTL8225SE_ANAPARAM2_ON 0x000004c6 + +/* all off except PLL */ +#define RTL8225SE_ANAPARAM_OFF 0xb0054dec +/* all on including PLL */ +#define RTL8225SE_ANAPARAM_OFF2 0xb0054dfc + +#define RTL8225SE_ANAPARAM2_OFF 0x00ff04c6 + +#define RTL8225SE_ANAPARAM3 0x10 + +enum rtl8187se_power_state { + RTL8187SE_POWER_ON, + RTL8187SE_POWER_OFF, + RTL8187SE_POWER_SLEEP +}; + +static inline void rtl8225se_write_phy_ofdm(struct ieee80211_hw *dev, + u8 addr, u8 data) +{ + rtl8180_write_phy(dev, addr, data); +} + +static inline void rtl8225se_write_phy_cck(struct ieee80211_hw *dev, + u8 addr, u8 data) +{ + rtl8180_write_phy(dev, addr, data | 0x10000); +} + + +const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *); +void rtl8225se_rf_stop(struct ieee80211_hw *dev); +void rtl8225se_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf); +void rtl8225se_rf_conf_erp(struct ieee80211_hw *dev, + struct ieee80211_bss_conf *info); +void rtl8225se_rf_init(struct ieee80211_hw *dev); + +#endif /* RTL8187SE_RTL8225_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.c b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.c new file mode 100644 index 000000000..dd12f5cdb --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Radio tuning for Philips SA2400 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <net/mac80211.h> + +#include "rtl8180.h" +#include "sa2400.h" + +static const u32 sa2400_chan[] = { + 0x00096c, /* ch1 */ + 0x080970, + 0x100974, + 0x180978, + 0x000980, + 0x080984, + 0x100988, + 0x18098c, + 0x000994, + 0x080998, + 0x10099c, + 0x1809a0, + 0x0009a8, + 0x0009b4, /* ch 14 */ +}; + +static void write_sa2400(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8180_priv *priv = dev->priv; + u32 phy_config; + + /* MAC will bang bits to the sa2400. sw 3-wire is NOT used */ + phy_config = 0xb0000000; + + phy_config |= ((u32)(addr & 0xf)) << 24; + phy_config |= data & 0xffffff; + + rtl818x_iowrite32(priv, + (__le32 __iomem *) &priv->map->RFPinsOutput, phy_config); + + msleep(3); +} + +static void sa2400_write_phy_antenna(struct ieee80211_hw *dev, short chan) +{ + struct rtl8180_priv *priv = dev->priv; + u8 ant = SA2400_ANTENNA; + + if (priv->rfparam & RF_PARAM_ANTBDEFAULT) + ant |= BB_ANTENNA_B; + + if (chan == 14) + ant |= BB_ANTATTEN_CHAN14; + + rtl8180_write_phy(dev, 0x10, ant); + +} + +static u8 sa2400_rf_rssi_map[] = { + 0x64, 0x64, 0x63, 0x62, 0x61, 0x60, 0x5f, 0x5e, + 0x5d, 0x5c, 0x5b, 0x5a, 0x57, 0x54, 0x52, 0x50, + 0x4e, 0x4c, 0x4a, 0x48, 0x46, 0x44, 0x41, 0x3f, + 0x3c, 0x3a, 0x37, 0x36, 0x36, 0x1c, 0x1c, 0x1b, + 0x1b, 0x1a, 0x1a, 0x19, 0x19, 0x18, 0x18, 0x17, + 0x17, 0x16, 0x16, 0x15, 0x15, 0x14, 0x14, 0x13, + 0x13, 0x12, 0x12, 0x11, 0x11, 0x10, 0x10, 0x0f, + 0x0f, 0x0e, 0x0e, 0x0d, 0x0d, 0x0c, 0x0c, 0x0b, + 0x0b, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x07, + 0x07, 0x06, 0x06, 0x05, 0x04, 0x03, 0x02, +}; + +static u8 sa2400_rf_calc_rssi(u8 agc, u8 sq) +{ + if (sq == 0x80) + return 1; + + if (sq > 78) + return 32; + + /* TODO: recalc sa2400_rf_rssi_map to avoid mult / div */ + return 65 * sa2400_rf_rssi_map[sq] / 100; +} + +static void sa2400_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + struct rtl8180_priv *priv = dev->priv; + int channel = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); + u32 txpw = priv->channels[channel - 1].hw_value & 0xFF; + u32 chan = sa2400_chan[channel - 1]; + + write_sa2400(dev, 7, txpw); + + sa2400_write_phy_antenna(dev, channel); + + write_sa2400(dev, 0, chan); + write_sa2400(dev, 1, 0xbb50); + write_sa2400(dev, 2, 0x80); + write_sa2400(dev, 3, 0); +} + +static void sa2400_rf_stop(struct ieee80211_hw *dev) +{ + write_sa2400(dev, 4, 0); +} + +static void sa2400_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8180_priv *priv = dev->priv; + u32 anaparam, txconf; + u8 firdac; + int analogphy = priv->rfparam & RF_PARAM_ANALOGPHY; + + anaparam = priv->anaparam; + anaparam &= ~(1 << ANAPARAM_TXDACOFF_SHIFT); + anaparam &= ~ANAPARAM_PWR1_MASK; + anaparam &= ~ANAPARAM_PWR0_MASK; + + if (analogphy) { + anaparam |= SA2400_ANA_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT; + firdac = 0; + } else { + anaparam |= (SA2400_DIG_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT); + anaparam |= (SA2400_ANAPARAM_PWR0_ON << ANAPARAM_PWR0_SHIFT); + firdac = 1 << SA2400_REG4_FIRDAC_SHIFT; + } + + rtl8180_set_anaparam(priv, anaparam); + + write_sa2400(dev, 0, sa2400_chan[0]); + write_sa2400(dev, 1, 0xbb50); + write_sa2400(dev, 2, 0x80); + write_sa2400(dev, 3, 0); + write_sa2400(dev, 4, 0x19340 | firdac); + write_sa2400(dev, 5, 0x1dfb | (SA2400_MAX_SENS - 54) << 15); + write_sa2400(dev, 4, 0x19348 | firdac); /* calibrate VCO */ + + if (!analogphy) + write_sa2400(dev, 4, 0x1938c); /*???*/ + + write_sa2400(dev, 4, 0x19340 | firdac); + + write_sa2400(dev, 0, sa2400_chan[0]); + write_sa2400(dev, 1, 0xbb50); + write_sa2400(dev, 2, 0x80); + write_sa2400(dev, 3, 0); + write_sa2400(dev, 4, 0x19344 | firdac); /* calibrate filter */ + + /* new from rtl8180 embedded driver (rtl8181 project) */ + write_sa2400(dev, 6, 0x13ff | (1 << 23)); /* MANRX */ + write_sa2400(dev, 8, 0); /* VCO */ + + if (analogphy) { + rtl8180_set_anaparam(priv, anaparam | + (1 << ANAPARAM_TXDACOFF_SHIFT)); + + txconf = rtl818x_ioread32(priv, &priv->map->TX_CONF); + rtl818x_iowrite32(priv, &priv->map->TX_CONF, + txconf | RTL818X_TX_CONF_LOOPBACK_CONT); + + write_sa2400(dev, 4, 0x19341); /* calibrates DC */ + + /* a 5us sleep is required here, + * we rely on the 3ms delay introduced in write_sa2400 */ + write_sa2400(dev, 4, 0x19345); + + /* a 20us sleep is required here, + * we rely on the 3ms delay introduced in write_sa2400 */ + + rtl818x_iowrite32(priv, &priv->map->TX_CONF, txconf); + + rtl8180_set_anaparam(priv, anaparam); + } + /* end new code */ + + write_sa2400(dev, 4, 0x19341 | firdac); /* RTX MODE */ + + /* baseband configuration */ + rtl8180_write_phy(dev, 0, 0x98); + rtl8180_write_phy(dev, 3, 0x38); + rtl8180_write_phy(dev, 4, 0xe0); + rtl8180_write_phy(dev, 5, 0x90); + rtl8180_write_phy(dev, 6, 0x1a); + rtl8180_write_phy(dev, 7, 0x64); + + sa2400_write_phy_antenna(dev, 1); + + rtl8180_write_phy(dev, 0x11, 0x80); + + if (rtl818x_ioread8(priv, &priv->map->CONFIG2) & + RTL818X_CONFIG2_ANTENNA_DIV) + rtl8180_write_phy(dev, 0x12, 0xc7); /* enable ant diversity */ + else + rtl8180_write_phy(dev, 0x12, 0x47); /* disable ant diversity */ + + rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold); + + rtl8180_write_phy(dev, 0x19, 0x0); + rtl8180_write_phy(dev, 0x1a, 0xa0); +} + +const struct rtl818x_rf_ops sa2400_rf_ops = { + .name = "Philips", + .init = sa2400_rf_init, + .stop = sa2400_rf_stop, + .set_chan = sa2400_rf_set_channel, + .calc_rssi = sa2400_rf_calc_rssi, +}; diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.h b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.h new file mode 100644 index 000000000..ef6565b20 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/sa2400.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef RTL8180_SA2400_H +#define RTL8180_SA2400_H + +/* + * Radio tuning for Philips SA2400 on RTL8180 + * + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Code from the BSD driver and the rtl8181 project have been + * very useful to understand certain things + * + * I want to thanks the Authors of such projects and the Ndiswrapper + * project Authors. + * + * A special Big Thanks also is for all people who donated me cards, + * making possible the creation of the original rtl8180 driver + * from which this code is derived! + */ + +#define SA2400_ANTENNA 0x91 +#define SA2400_DIG_ANAPARAM_PWR1_ON 0x8 +#define SA2400_ANA_ANAPARAM_PWR1_ON 0x28 +#define SA2400_ANAPARAM_PWR0_ON 0x3 + +/* RX sensitivity in dbm */ +#define SA2400_MAX_SENS 85 + +#define SA2400_REG4_FIRDAC_SHIFT 7 + +extern const struct rtl818x_rf_ops sa2400_rf_ops; + +#endif /* RTL8180_SA2400_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/Makefile b/drivers/net/wireless/realtek/rtl818x/rtl8187/Makefile new file mode 100644 index 000000000..0bf64dfb2 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +rtl8187-objs := dev.o rtl8225.o leds.o rfkill.o + +obj-$(CONFIG_RTL8187) += rtl8187.o + +ccflags-y += -I $(srctree)/$(src)/.. diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c new file mode 100644 index 000000000..c0f6e9c6d --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c @@ -0,0 +1,1684 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Linux device driver for RTL8187 + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8187 driver, which is: + * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al. + * + * The driver was extended to the RTL8187B in 2008 by: + * Herton Ronaldo Krzesinski <herton@mandriva.com.br> + * Hin-Tak Leung <htl10@users.sourceforge.net> + * Larry Finger <Larry.Finger@lwfinger.net> + * + * Magic delays and register offsets below are taken from the original + * r8187 driver sources. Thanks to Realtek for their support! + */ + +#include <linux/usb.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/etherdevice.h> +#include <linux/eeprom_93cx6.h> +#include <linux/module.h> +#include <net/mac80211.h> + +#include "rtl8187.h" +#include "rtl8225.h" +#ifdef CONFIG_RTL8187_LEDS +#include "leds.h" +#endif +#include "rfkill.h" + +MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); +MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>"); +MODULE_AUTHOR("Herton Ronaldo Krzesinski <herton@mandriva.com.br>"); +MODULE_AUTHOR("Hin-Tak Leung <htl10@users.sourceforge.net>"); +MODULE_AUTHOR("Larry Finger <Larry.Finger@lwfinger.net>"); +MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver"); +MODULE_LICENSE("GPL"); + +static const struct usb_device_id rtl8187_table[] = { + /* Asus */ + {USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187}, + /* Belkin */ + {USB_DEVICE(0x050d, 0x705e), .driver_info = DEVICE_RTL8187B}, + /* Realtek */ + {USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187}, + {USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B}, + {USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B}, + {USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B}, + /* Surecom */ + {USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187}, + /* Logitech */ + {USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187}, + /* Netgear */ + {USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187}, + {USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187}, + {USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B}, + /* HP */ + {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, + /* Sitecom */ + {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, + {USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B}, + /* Sphairon Access Systems GmbH */ + {USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187}, + /* Dick Smith Electronics */ + {USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187}, + /* Abocom */ + {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, + /* Qcom */ + {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187}, + /* AirLive */ + {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187}, + /* Linksys */ + {USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B}, + {} +}; + +MODULE_DEVICE_TABLE(usb, rtl8187_table); + +static const struct ieee80211_rate rtl818x_rates[] = { + { .bitrate = 10, .hw_value = 0, }, + { .bitrate = 20, .hw_value = 1, }, + { .bitrate = 55, .hw_value = 2, }, + { .bitrate = 110, .hw_value = 3, }, + { .bitrate = 60, .hw_value = 4, }, + { .bitrate = 90, .hw_value = 5, }, + { .bitrate = 120, .hw_value = 6, }, + { .bitrate = 180, .hw_value = 7, }, + { .bitrate = 240, .hw_value = 8, }, + { .bitrate = 360, .hw_value = 9, }, + { .bitrate = 480, .hw_value = 10, }, + { .bitrate = 540, .hw_value = 11, }, +}; + +static const struct ieee80211_channel rtl818x_channels[] = { + { .center_freq = 2412 }, + { .center_freq = 2417 }, + { .center_freq = 2422 }, + { .center_freq = 2427 }, + { .center_freq = 2432 }, + { .center_freq = 2437 }, + { .center_freq = 2442 }, + { .center_freq = 2447 }, + { .center_freq = 2452 }, + { .center_freq = 2457 }, + { .center_freq = 2462 }, + { .center_freq = 2467 }, + { .center_freq = 2472 }, + { .center_freq = 2484 }, +}; + +static void rtl8187_iowrite_async_cb(struct urb *urb) +{ + kfree(urb->context); +} + +static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr, + void *data, u16 len) +{ + struct usb_ctrlrequest *dr; + struct urb *urb; + struct rtl8187_async_write_data { + u8 data[4]; + struct usb_ctrlrequest dr; + } *buf; + int rc; + + buf = kmalloc(sizeof(*buf), GFP_ATOMIC); + if (!buf) + return; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + kfree(buf); + return; + } + + dr = &buf->dr; + + dr->bRequestType = RTL8187_REQT_WRITE; + dr->bRequest = RTL8187_REQ_SET_REG; + dr->wValue = addr; + dr->wIndex = 0; + dr->wLength = cpu_to_le16(len); + + memcpy(buf, data, len); + + usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0), + (unsigned char *)dr, buf, len, + rtl8187_iowrite_async_cb, buf); + usb_anchor_urb(urb, &priv->anchored); + rc = usb_submit_urb(urb, GFP_ATOMIC); + if (rc < 0) { + kfree(buf); + usb_unanchor_urb(urb); + } + usb_free_urb(urb); +} + +static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv, + __le32 *addr, u32 val) +{ + __le32 buf = cpu_to_le32(val); + + rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr), + &buf, sizeof(buf)); +} + +void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data) +{ + struct rtl8187_priv *priv = dev->priv; + + data <<= 8; + data |= addr | 0x80; + + rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF); + rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF); + rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF); + rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF); +} + +static void rtl8187_tx_cb(struct urb *urb) +{ + struct sk_buff *skb = (struct sk_buff *)urb->context; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hw *hw = info->rate_driver_data[0]; + struct rtl8187_priv *priv = hw->priv; + + skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) : + sizeof(struct rtl8187_tx_hdr)); + ieee80211_tx_info_clear_status(info); + + if (!(urb->status) && !(info->flags & IEEE80211_TX_CTL_NO_ACK)) { + if (priv->is_rtl8187b) { + skb_queue_tail(&priv->b_tx_status.queue, skb); + + /* queue is "full", discard last items */ + while (skb_queue_len(&priv->b_tx_status.queue) > 5) { + struct sk_buff *old_skb; + + dev_dbg(&priv->udev->dev, + "transmit status queue full\n"); + + old_skb = skb_dequeue(&priv->b_tx_status.queue); + ieee80211_tx_status_irqsafe(hw, old_skb); + } + return; + } else { + info->flags |= IEEE80211_TX_STAT_ACK; + } + } + if (priv->is_rtl8187b) + ieee80211_tx_status_irqsafe(hw, skb); + else { + /* Retry information for the RTI8187 is only available by + * reading a register in the device. We are in interrupt mode + * here, thus queue the skb and finish on a work queue. */ + skb_queue_tail(&priv->b_tx_status.queue, skb); + ieee80211_queue_delayed_work(hw, &priv->work, 0); + } +} + +static void rtl8187_tx(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct rtl8187_priv *priv = dev->priv; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *tx_hdr = (struct ieee80211_hdr *)(skb->data); + unsigned int ep; + void *buf; + struct urb *urb; + __le16 rts_dur = 0; + u32 flags; + int rc; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + kfree_skb(skb); + return; + } + + flags = skb->len; + flags |= RTL818X_TX_DESC_FLAG_NO_ENC; + + flags |= ieee80211_get_tx_rate(dev, info)->hw_value << 24; + if (ieee80211_has_morefrags(tx_hdr->frame_control)) + flags |= RTL818X_TX_DESC_FLAG_MOREFRAG; + + /* HW will perform RTS-CTS when only RTS flags is set. + * HW will perform CTS-to-self when both RTS and CTS flags are set. + * RTS rate and RTS duration will be used also for CTS-to-self. + */ + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) { + flags |= RTL818X_TX_DESC_FLAG_RTS; + flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; + rts_dur = ieee80211_rts_duration(dev, priv->vif, + skb->len, info); + } else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { + flags |= RTL818X_TX_DESC_FLAG_RTS | RTL818X_TX_DESC_FLAG_CTS; + flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19; + rts_dur = ieee80211_ctstoself_duration(dev, priv->vif, + skb->len, info); + } + + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + priv->seqno += 0x10; + tx_hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + tx_hdr->seq_ctrl |= cpu_to_le16(priv->seqno); + } + + if (!priv->is_rtl8187b) { + struct rtl8187_tx_hdr *hdr = skb_push(skb, sizeof(*hdr)); + hdr->flags = cpu_to_le32(flags); + hdr->len = 0; + hdr->rts_duration = rts_dur; + hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); + buf = hdr; + + ep = 2; + } else { + /* fc needs to be calculated before skb_push() */ + unsigned int epmap[4] = { 6, 7, 5, 4 }; + u16 fc = le16_to_cpu(tx_hdr->frame_control); + + struct rtl8187b_tx_hdr *hdr = skb_push(skb, sizeof(*hdr)); + struct ieee80211_rate *txrate = + ieee80211_get_tx_rate(dev, info); + memset(hdr, 0, sizeof(*hdr)); + hdr->flags = cpu_to_le32(flags); + hdr->rts_duration = rts_dur; + hdr->retry = cpu_to_le32((info->control.rates[0].count - 1) << 8); + hdr->tx_duration = + ieee80211_generic_frame_duration(dev, priv->vif, + info->band, + skb->len, txrate); + buf = hdr; + + if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) + ep = 12; + else + ep = epmap[skb_get_queue_mapping(skb)]; + } + + info->rate_driver_data[0] = dev; + info->rate_driver_data[1] = urb; + + usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep), + buf, skb->len, rtl8187_tx_cb, skb); + urb->transfer_flags |= URB_ZERO_PACKET; + usb_anchor_urb(urb, &priv->anchored); + rc = usb_submit_urb(urb, GFP_ATOMIC); + if (rc < 0) { + usb_unanchor_urb(urb); + kfree_skb(skb); + } + usb_free_urb(urb); +} + +static void rtl8187_rx_cb(struct urb *urb) +{ + struct sk_buff *skb = (struct sk_buff *)urb->context; + struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb; + struct ieee80211_hw *dev = info->dev; + struct rtl8187_priv *priv = dev->priv; + struct ieee80211_rx_status rx_status = { 0 }; + int rate, signal; + u32 flags; + unsigned long f; + + spin_lock_irqsave(&priv->rx_queue.lock, f); + __skb_unlink(skb, &priv->rx_queue); + spin_unlock_irqrestore(&priv->rx_queue.lock, f); + skb_put(skb, urb->actual_length); + + if (unlikely(urb->status)) { + dev_kfree_skb_irq(skb); + return; + } + + if (!priv->is_rtl8187b) { + struct rtl8187_rx_hdr *hdr = + (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr)); + flags = le32_to_cpu(hdr->flags); + /* As with the RTL8187B below, the AGC is used to calculate + * signal strength. In this case, the scaling + * constants are derived from the output of p54usb. + */ + signal = -4 - ((27 * hdr->agc) >> 6); + rx_status.antenna = (hdr->signal >> 7) & 1; + rx_status.mactime = le64_to_cpu(hdr->mac_time); + } else { + struct rtl8187b_rx_hdr *hdr = + (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr)); + /* The Realtek datasheet for the RTL8187B shows that the RX + * header contains the following quantities: signal quality, + * RSSI, AGC, the received power in dB, and the measured SNR. + * In testing, none of these quantities show qualitative + * agreement with AP signal strength, except for the AGC, + * which is inversely proportional to the strength of the + * signal. In the following, the signal strength + * is derived from the AGC. The arbitrary scaling constants + * are chosen to make the results close to the values obtained + * for a BCM4312 using b43 as the driver. The noise is ignored + * for now. + */ + flags = le32_to_cpu(hdr->flags); + signal = 14 - hdr->agc / 2; + rx_status.antenna = (hdr->rssi >> 7) & 1; + rx_status.mactime = le64_to_cpu(hdr->mac_time); + } + + rx_status.signal = signal; + priv->signal = signal; + rate = (flags >> 20) & 0xF; + skb_trim(skb, flags & 0x0FFF); + rx_status.rate_idx = rate; + rx_status.freq = dev->conf.chandef.chan->center_freq; + rx_status.band = dev->conf.chandef.chan->band; + rx_status.flag |= RX_FLAG_MACTIME_START; + if (flags & RTL818X_RX_DESC_FLAG_SPLCP) + rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE; + if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR) + rx_status.flag |= RX_FLAG_FAILED_FCS_CRC; + memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); + ieee80211_rx_irqsafe(dev, skb); + + skb = dev_alloc_skb(RTL8187_MAX_RX); + if (unlikely(!skb)) { + /* TODO check rx queue length and refill *somewhere* */ + return; + } + + info = (struct rtl8187_rx_info *)skb->cb; + info->urb = urb; + info->dev = dev; + urb->transfer_buffer = skb_tail_pointer(skb); + urb->context = skb; + skb_queue_tail(&priv->rx_queue, skb); + + usb_anchor_urb(urb, &priv->anchored); + if (usb_submit_urb(urb, GFP_ATOMIC)) { + usb_unanchor_urb(urb); + skb_unlink(skb, &priv->rx_queue); + dev_kfree_skb_irq(skb); + } +} + +static int rtl8187_init_urbs(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + struct urb *entry = NULL; + struct sk_buff *skb; + struct rtl8187_rx_info *info; + int ret = 0; + + while (skb_queue_len(&priv->rx_queue) < 32) { + skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL); + if (!skb) { + ret = -ENOMEM; + goto err; + } + entry = usb_alloc_urb(0, GFP_KERNEL); + if (!entry) { + ret = -ENOMEM; + goto err; + } + usb_fill_bulk_urb(entry, priv->udev, + usb_rcvbulkpipe(priv->udev, + priv->is_rtl8187b ? 3 : 1), + skb_tail_pointer(skb), + RTL8187_MAX_RX, rtl8187_rx_cb, skb); + info = (struct rtl8187_rx_info *)skb->cb; + info->urb = entry; + info->dev = dev; + skb_queue_tail(&priv->rx_queue, skb); + usb_anchor_urb(entry, &priv->anchored); + ret = usb_submit_urb(entry, GFP_KERNEL); + if (ret) { + skb_unlink(skb, &priv->rx_queue); + usb_unanchor_urb(entry); + usb_put_urb(entry); + goto err; + } + usb_put_urb(entry); + } + return ret; + +err: + kfree_skb(skb); + usb_kill_anchored_urbs(&priv->anchored); + return ret; +} + +static void rtl8187b_status_cb(struct urb *urb) +{ + struct ieee80211_hw *hw = (struct ieee80211_hw *)urb->context; + struct rtl8187_priv *priv = hw->priv; + u64 val; + unsigned int cmd_type; + + if (unlikely(urb->status)) + return; + + /* + * Read from status buffer: + * + * bits [30:31] = cmd type: + * - 0 indicates tx beacon interrupt + * - 1 indicates tx close descriptor + * + * In the case of tx beacon interrupt: + * [0:9] = Last Beacon CW + * [10:29] = reserved + * [30:31] = 00b + * [32:63] = Last Beacon TSF + * + * If it's tx close descriptor: + * [0:7] = Packet Retry Count + * [8:14] = RTS Retry Count + * [15] = TOK + * [16:27] = Sequence No + * [28] = LS + * [29] = FS + * [30:31] = 01b + * [32:47] = unused (reserved?) + * [48:63] = MAC Used Time + */ + val = le64_to_cpu(priv->b_tx_status.buf); + + cmd_type = (val >> 30) & 0x3; + if (cmd_type == 1) { + unsigned int pkt_rc, seq_no; + bool tok; + struct sk_buff *skb, *iter; + struct ieee80211_hdr *ieee80211hdr; + unsigned long flags; + + pkt_rc = val & 0xFF; + tok = val & (1 << 15); + seq_no = (val >> 16) & 0xFFF; + + spin_lock_irqsave(&priv->b_tx_status.queue.lock, flags); + skb = NULL; + skb_queue_reverse_walk(&priv->b_tx_status.queue, iter) { + ieee80211hdr = (struct ieee80211_hdr *)iter->data; + + /* + * While testing, it was discovered that the seq_no + * doesn't actually contains the sequence number. + * Instead of returning just the 12 bits of sequence + * number, hardware is returning entire sequence control + * (fragment number plus sequence number) in a 12 bit + * only field overflowing after some time. As a + * workaround, just consider the lower bits, and expect + * it's unlikely we wrongly ack some sent data + */ + if ((le16_to_cpu(ieee80211hdr->seq_ctrl) + & 0xFFF) == seq_no) { + skb = iter; + break; + } + } + if (skb) { + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + __skb_unlink(skb, &priv->b_tx_status.queue); + if (tok) + info->flags |= IEEE80211_TX_STAT_ACK; + info->status.rates[0].count = pkt_rc + 1; + + ieee80211_tx_status_irqsafe(hw, skb); + } + spin_unlock_irqrestore(&priv->b_tx_status.queue.lock, flags); + } + + usb_anchor_urb(urb, &priv->anchored); + if (usb_submit_urb(urb, GFP_ATOMIC)) + usb_unanchor_urb(urb); +} + +static int rtl8187b_init_status_urb(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + struct urb *entry; + int ret = 0; + + entry = usb_alloc_urb(0, GFP_KERNEL); + if (!entry) + return -ENOMEM; + + usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, 9), + &priv->b_tx_status.buf, sizeof(priv->b_tx_status.buf), + rtl8187b_status_cb, dev); + + usb_anchor_urb(entry, &priv->anchored); + ret = usb_submit_urb(entry, GFP_KERNEL); + if (ret) + usb_unanchor_urb(entry); + usb_free_urb(entry); + + return ret; +} + +static void rtl8187_set_anaparam(struct rtl8187_priv *priv, bool rfon) +{ + u32 anaparam, anaparam2; + u8 anaparam3, reg; + + if (!priv->is_rtl8187b) { + if (rfon) { + anaparam = RTL8187_RTL8225_ANAPARAM_ON; + anaparam2 = RTL8187_RTL8225_ANAPARAM2_ON; + } else { + anaparam = RTL8187_RTL8225_ANAPARAM_OFF; + anaparam2 = RTL8187_RTL8225_ANAPARAM2_OFF; + } + } else { + if (rfon) { + anaparam = RTL8187B_RTL8225_ANAPARAM_ON; + anaparam2 = RTL8187B_RTL8225_ANAPARAM2_ON; + anaparam3 = RTL8187B_RTL8225_ANAPARAM3_ON; + } else { + anaparam = RTL8187B_RTL8225_ANAPARAM_OFF; + anaparam2 = RTL8187B_RTL8225_ANAPARAM2_OFF; + anaparam3 = RTL8187B_RTL8225_ANAPARAM3_OFF; + } + } + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + reg |= RTL818X_CONFIG3_ANAPARAM_WRITE; + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2); + if (priv->is_rtl8187b) + rtl818x_iowrite8(priv, &priv->map->ANAPARAM3A, anaparam3); + reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE; + rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); +} + +static int rtl8187_cmd_reset(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + u8 reg; + int i; + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg &= (1 << 1); + reg |= RTL818X_CMD_RESET; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + + i = 10; + do { + msleep(2); + if (!(rtl818x_ioread8(priv, &priv->map->CMD) & + RTL818X_CMD_RESET)) + break; + } while (--i); + + if (!i) { + wiphy_err(dev->wiphy, "Reset timeout!\n"); + return -ETIMEDOUT; + } + + /* reload registers from eeprom */ + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD); + + i = 10; + do { + msleep(4); + if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) & + RTL818X_EEPROM_CMD_CONFIG)) + break; + } while (--i); + + if (!i) { + wiphy_err(dev->wiphy, "eeprom reset timeout!\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int rtl8187_init_hw(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + u8 reg; + int res; + + /* reset */ + rtl8187_set_anaparam(priv, true); + + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + + msleep(200); + rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10); + rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11); + rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00); + msleep(200); + + res = rtl8187_cmd_reset(dev); + if (res) + return res; + + rtl8187_set_anaparam(priv, true); + + /* setup card */ + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0); + + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8)); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 1); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + + rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG1); + reg &= 0x3F; + reg |= 0x80; + rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0); + rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); + rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0); + + // TODO: set RESP_RATE and BRSR properly + rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0); + rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); + + /* host_usb_init */ + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0); + reg = rtl818x_ioread8(priv, (u8 *)0xFE53); + rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7)); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8)); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x20); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80); + msleep(100); + + rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008); + rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF); + rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_CONFIG); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7); + msleep(100); + + priv->rf->init(dev); + + rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3); + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1; + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1); + rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10); + rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80); + rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + + return 0; +} + +static const u8 rtl8187b_reg_table[][3] = { + {0xF0, 0x32, 0}, {0xF1, 0x32, 0}, {0xF2, 0x00, 0}, {0xF3, 0x00, 0}, + {0xF4, 0x32, 0}, {0xF5, 0x43, 0}, {0xF6, 0x00, 0}, {0xF7, 0x00, 0}, + {0xF8, 0x46, 0}, {0xF9, 0xA4, 0}, {0xFA, 0x00, 0}, {0xFB, 0x00, 0}, + {0xFC, 0x96, 0}, {0xFD, 0xA4, 0}, {0xFE, 0x00, 0}, {0xFF, 0x00, 0}, + + {0x58, 0x4B, 1}, {0x59, 0x00, 1}, {0x5A, 0x4B, 1}, {0x5B, 0x00, 1}, + {0x60, 0x4B, 1}, {0x61, 0x09, 1}, {0x62, 0x4B, 1}, {0x63, 0x09, 1}, + {0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1}, + {0xF2, 0x02, 1}, {0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1}, + {0xF6, 0x06, 1}, {0xF7, 0x07, 1}, {0xF8, 0x08, 1}, + + {0x4E, 0x00, 2}, {0x0C, 0x04, 2}, {0x21, 0x61, 2}, {0x22, 0x68, 2}, + {0x23, 0x6F, 2}, {0x24, 0x76, 2}, {0x25, 0x7D, 2}, {0x26, 0x84, 2}, + {0x27, 0x8D, 2}, {0x4D, 0x08, 2}, {0x50, 0x05, 2}, {0x51, 0xF5, 2}, + {0x52, 0x04, 2}, {0x53, 0xA0, 2}, {0x54, 0x1F, 2}, {0x55, 0x23, 2}, + {0x56, 0x45, 2}, {0x57, 0x67, 2}, {0x58, 0x08, 2}, {0x59, 0x08, 2}, + {0x5A, 0x08, 2}, {0x5B, 0x08, 2}, {0x60, 0x08, 2}, {0x61, 0x08, 2}, + {0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2}, + + {0x5B, 0x40, 0}, {0x84, 0x88, 0}, {0x85, 0x24, 0}, {0x88, 0x54, 0}, + {0x8B, 0xB8, 0}, {0x8C, 0x07, 0}, {0x8D, 0x00, 0}, {0x94, 0x1B, 0}, + {0x95, 0x12, 0}, {0x96, 0x00, 0}, {0x97, 0x06, 0}, {0x9D, 0x1A, 0}, + {0x9F, 0x10, 0}, {0xB4, 0x22, 0}, {0xBE, 0x80, 0}, {0xDB, 0x00, 0}, + {0xEE, 0x00, 0}, {0x4C, 0x00, 2}, + + {0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, {0x8E, 0x08, 0}, + {0x8F, 0x00, 0} +}; + +static int rtl8187b_init_hw(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + int res, i; + u8 reg; + + rtl8187_set_anaparam(priv, true); + + /* Reset PLL sequence on 8187B. Realtek note: reduces power + * consumption about 30 mA */ + rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10); + reg = rtl818x_ioread8(priv, (u8 *)0xFF62); + rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5)); + rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5)); + + res = rtl8187_cmd_reset(dev); + if (res) + return res; + + rtl8187_set_anaparam(priv, true); + + /* BRSR (Basic Rate Set Register) on 8187B looks to be the same as + * RESP_RATE on 8187L in Realtek sources: each bit should be each + * one of the 12 rates, all are enabled */ + rtl818x_iowrite16(priv, (__le16 *)0xFF34, 0x0FFF); + + reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); + reg |= RTL818X_CW_CONF_PERPACKET_RETRY; + rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); + + /* Auto Rate Fallback Register (ARFR): 1M-54M setting */ + rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1); + rtl818x_iowrite8_idx(priv, (u8 *)0xFFE2, 0x00, 1); + + rtl818x_iowrite16_idx(priv, (__le16 *)0xFFD4, 0xFFFF, 1); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG1); + rtl818x_iowrite8(priv, &priv->map->CONFIG1, (reg & 0x3F) | 0x80); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, + RTL818X_EEPROM_CMD_NORMAL); + + rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0); + for (i = 0; i < ARRAY_SIZE(rtl8187b_reg_table); i++) { + rtl818x_iowrite8_idx(priv, + (u8 *)(uintptr_t) + (rtl8187b_reg_table[i][0] | 0xFF00), + rtl8187b_reg_table[i][1], + rtl8187b_reg_table[i][2]); + } + + rtl818x_iowrite16(priv, &priv->map->TID_AC_MAP, 0xFA50); + rtl818x_iowrite16(priv, &priv->map->INT_MIG, 0); + + rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF0, 0, 1); + rtl818x_iowrite32_idx(priv, (__le32 *)0xFFF4, 0, 1); + rtl818x_iowrite8_idx(priv, (u8 *)0xFFF8, 0, 1); + + rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00004001); + + /* RFSW_CTRL register */ + rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x569A, 2); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488); + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF); + msleep(100); + + priv->rf->init(dev); + + reg = RTL818X_CMD_TX_ENABLE | RTL818X_CMD_RX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); + + rtl818x_iowrite8(priv, (u8 *)0xFE41, 0xF4); + rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x00); + rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00); + rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01); + rtl818x_iowrite8(priv, (u8 *)0xFE40, 0x0F); + rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x00); + rtl818x_iowrite8(priv, (u8 *)0xFE42, 0x01); + + reg = rtl818x_ioread8(priv, (u8 *)0xFFDB); + rtl818x_iowrite8(priv, (u8 *)0xFFDB, reg | (1 << 2)); + rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x59FA, 3); + rtl818x_iowrite16_idx(priv, (__le16 *)0xFF74, 0x59D2, 3); + rtl818x_iowrite16_idx(priv, (__le16 *)0xFF76, 0x59D2, 3); + rtl818x_iowrite16_idx(priv, (__le16 *)0xFF78, 0x19FA, 3); + rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7A, 0x19FA, 3); + rtl818x_iowrite16_idx(priv, (__le16 *)0xFF7C, 0x00D0, 3); + rtl818x_iowrite8(priv, (u8 *)0xFF61, 0); + rtl818x_iowrite8_idx(priv, (u8 *)0xFF80, 0x0F, 1); + rtl818x_iowrite8_idx(priv, (u8 *)0xFF83, 0x03, 1); + rtl818x_iowrite8(priv, (u8 *)0xFFDA, 0x10); + rtl818x_iowrite8_idx(priv, (u8 *)0xFF4D, 0x08, 2); + + rtl818x_iowrite32(priv, &priv->map->HSSI_PARA, 0x0600321B); + + rtl818x_iowrite16_idx(priv, (__le16 *)0xFFEC, 0x0800, 1); + + priv->slot_time = 0x9; + priv->aifsn[0] = 2; /* AIFSN[AC_VO] */ + priv->aifsn[1] = 2; /* AIFSN[AC_VI] */ + priv->aifsn[2] = 7; /* AIFSN[AC_BK] */ + priv->aifsn[3] = 3; /* AIFSN[AC_BE] */ + rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0); + + /* ENEDCA flag must always be set, transmit issues? */ + rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA); + + return 0; +} + +static void rtl8187_work(struct work_struct *work) +{ + /* The RTL8187 returns the retry count through register 0xFFFA. In + * addition, it appears to be a cumulative retry count, not the + * value for the current TX packet. When multiple TX entries are + * waiting in the queue, the retry count will be the total for all. + * The "error" may matter for purposes of rate setting, but there is + * no other choice with this hardware. + */ + struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv, + work.work); + struct ieee80211_tx_info *info; + struct ieee80211_hw *dev = priv->dev; + static u16 retry; + u16 tmp; + u16 avg_retry; + int length; + + mutex_lock(&priv->conf_mutex); + tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA); + length = skb_queue_len(&priv->b_tx_status.queue); + if (unlikely(!length)) + length = 1; + if (unlikely(tmp < retry)) + tmp = retry; + avg_retry = (tmp - retry) / length; + while (skb_queue_len(&priv->b_tx_status.queue) > 0) { + struct sk_buff *old_skb; + + old_skb = skb_dequeue(&priv->b_tx_status.queue); + info = IEEE80211_SKB_CB(old_skb); + info->status.rates[0].count = avg_retry + 1; + if (info->status.rates[0].count > RETRY_COUNT) + info->flags &= ~IEEE80211_TX_STAT_ACK; + ieee80211_tx_status_irqsafe(dev, old_skb); + } + retry = tmp; + mutex_unlock(&priv->conf_mutex); +} + +static int rtl8187_start(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + u32 reg; + int ret; + + mutex_lock(&priv->conf_mutex); + + ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) : + rtl8187b_init_hw(dev); + if (ret) + goto rtl8187_start_exit; + + init_usb_anchor(&priv->anchored); + priv->dev = dev; + + if (priv->is_rtl8187b) { + reg = RTL818X_RX_CONF_MGMT | + RTL818X_RX_CONF_DATA | + RTL818X_RX_CONF_BROADCAST | + RTL818X_RX_CONF_NICMAC | + RTL818X_RX_CONF_BSSID | + (7 << 13 /* RX FIFO threshold NONE */) | + (7 << 10 /* MAX RX DMA */) | + RTL818X_RX_CONF_RX_AUTORESETPHY | + RTL818X_RX_CONF_ONLYERLPKT; + priv->rx_conf = reg; + rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL; + reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT; + rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); + + rtl818x_iowrite32(priv, &priv->map->TX_CONF, + RTL818X_TX_CONF_HW_SEQNUM | + RTL818X_TX_CONF_DISREQQSIZE | + (RETRY_COUNT << 8 /* short retry limit */) | + (RETRY_COUNT << 0 /* long retry limit */) | + (7 << 21 /* MAX TX DMA */)); + ret = rtl8187_init_urbs(dev); + if (ret) + goto rtl8187_start_exit; + ret = rtl8187b_init_status_urb(dev); + if (ret) + usb_kill_anchored_urbs(&priv->anchored); + goto rtl8187_start_exit; + } + + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); + + rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0); + rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0); + + ret = rtl8187_init_urbs(dev); + if (ret) + goto rtl8187_start_exit; + + reg = RTL818X_RX_CONF_ONLYERLPKT | + RTL818X_RX_CONF_RX_AUTORESETPHY | + RTL818X_RX_CONF_BSSID | + RTL818X_RX_CONF_MGMT | + RTL818X_RX_CONF_DATA | + (7 << 13 /* RX FIFO threshold NONE */) | + (7 << 10 /* MAX RX DMA */) | + RTL818X_RX_CONF_BROADCAST | + RTL818X_RX_CONF_NICMAC; + + priv->rx_conf = reg; + rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->CW_CONF); + reg &= ~RTL818X_CW_CONF_PERPACKET_CW; + reg |= RTL818X_CW_CONF_PERPACKET_RETRY; + rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL); + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN; + reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL; + reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT; + rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg); + + reg = RTL818X_TX_CONF_CW_MIN | + (7 << 21 /* MAX TX DMA */) | + RTL818X_TX_CONF_NO_ICV; + rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg |= RTL818X_CMD_TX_ENABLE; + reg |= RTL818X_CMD_RX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + INIT_DELAYED_WORK(&priv->work, rtl8187_work); + +rtl8187_start_exit: + mutex_unlock(&priv->conf_mutex); + return ret; +} + +static void rtl8187_stop(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + struct sk_buff *skb; + u32 reg; + + mutex_lock(&priv->conf_mutex); + rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); + + reg = rtl818x_ioread8(priv, &priv->map->CMD); + reg &= ~RTL818X_CMD_TX_ENABLE; + reg &= ~RTL818X_CMD_RX_ENABLE; + rtl818x_iowrite8(priv, &priv->map->CMD, reg); + + priv->rf->stop(dev); + rtl8187_set_anaparam(priv, false); + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG4); + rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + while ((skb = skb_dequeue(&priv->b_tx_status.queue))) + dev_kfree_skb_any(skb); + + usb_kill_anchored_urbs(&priv->anchored); + mutex_unlock(&priv->conf_mutex); + + if (!priv->is_rtl8187b) + cancel_delayed_work_sync(&priv->work); +} + +static u64 rtl8187_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif) +{ + struct rtl8187_priv *priv = dev->priv; + + return rtl818x_ioread32(priv, &priv->map->TSFT[0]) | + (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32; +} + + +static void rtl8187_beacon_work(struct work_struct *work) +{ + struct rtl8187_vif *vif_priv = + container_of(work, struct rtl8187_vif, beacon_work.work); + struct ieee80211_vif *vif = + container_of((void *)vif_priv, struct ieee80211_vif, drv_priv); + struct ieee80211_hw *dev = vif_priv->dev; + struct ieee80211_mgmt *mgmt; + struct sk_buff *skb; + + /* don't overflow the tx ring */ + if (ieee80211_queue_stopped(dev, 0)) + goto resched; + + /* grab a fresh beacon */ + skb = ieee80211_beacon_get(dev, vif, 0); + if (!skb) + goto resched; + + /* + * update beacon timestamp w/ TSF value + * TODO: make hardware update beacon timestamp + */ + mgmt = (struct ieee80211_mgmt *)skb->data; + mgmt->u.beacon.timestamp = cpu_to_le64(rtl8187_get_tsf(dev, vif)); + + /* TODO: use actual beacon queue */ + skb_set_queue_mapping(skb, 0); + + rtl8187_tx(dev, NULL, skb); + +resched: + /* + * schedule next beacon + * TODO: use hardware support for beacon timing + */ + schedule_delayed_work(&vif_priv->beacon_work, + usecs_to_jiffies(1024 * vif->bss_conf.beacon_int)); +} + + +static int rtl8187_add_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif) +{ + struct rtl8187_priv *priv = dev->priv; + struct rtl8187_vif *vif_priv; + int i; + int ret = -EOPNOTSUPP; + + mutex_lock(&priv->conf_mutex); + if (priv->vif) + goto exit; + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + break; + default: + goto exit; + } + + ret = 0; + priv->vif = vif; + + /* Initialize driver private area */ + vif_priv = (struct rtl8187_vif *)&vif->drv_priv; + vif_priv->dev = dev; + INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8187_beacon_work); + vif_priv->enable_beacon = false; + + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + for (i = 0; i < ETH_ALEN; i++) + rtl818x_iowrite8(priv, &priv->map->MAC[i], + ((u8 *)vif->addr)[i]); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + +exit: + mutex_unlock(&priv->conf_mutex); + return ret; +} + +static void rtl8187_remove_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif) +{ + struct rtl8187_priv *priv = dev->priv; + mutex_lock(&priv->conf_mutex); + priv->vif = NULL; + mutex_unlock(&priv->conf_mutex); +} + +static int rtl8187_config(struct ieee80211_hw *dev, u32 changed) +{ + struct rtl8187_priv *priv = dev->priv; + struct ieee80211_conf *conf = &dev->conf; + u32 reg; + + mutex_lock(&priv->conf_mutex); + reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); + /* Enable TX loopback on MAC level to avoid TX during channel + * changes, as this has be seen to causes problems and the + * card will stop work until next reset + */ + rtl818x_iowrite32(priv, &priv->map->TX_CONF, + reg | RTL818X_TX_CONF_LOOPBACK_MAC); + priv->rf->set_chan(dev, conf); + msleep(10); + rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg); + + rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2); + rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100); + rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100); + rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100); + mutex_unlock(&priv->conf_mutex); + return 0; +} + +/* + * With 8187B, AC_*_PARAM clashes with FEMR definition in struct rtl818x_csr for + * example. Thus we have to use raw values for AC_*_PARAM register addresses. + */ +static __le32 *rtl8187b_ac_addr[4] = { + (__le32 *) 0xFFF0, /* AC_VO */ + (__le32 *) 0xFFF4, /* AC_VI */ + (__le32 *) 0xFFFC, /* AC_BK */ + (__le32 *) 0xFFF8, /* AC_BE */ +}; + +#define SIFS_TIME 0xa + +static void rtl8187_conf_erp(struct rtl8187_priv *priv, bool use_short_slot, + bool use_short_preamble) +{ + if (priv->is_rtl8187b) { + u8 difs, eifs; + u16 ack_timeout; + int queue; + + if (use_short_slot) { + priv->slot_time = 0x9; + difs = 0x1c; + eifs = 0x53; + } else { + priv->slot_time = 0x14; + difs = 0x32; + eifs = 0x5b; + } + rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22); + rtl818x_iowrite8(priv, &priv->map->SLOT, priv->slot_time); + rtl818x_iowrite8(priv, &priv->map->DIFS, difs); + + /* + * BRSR+1 on 8187B is in fact EIFS register + * Value in units of 4 us + */ + rtl818x_iowrite8(priv, (u8 *)&priv->map->BRSR + 1, eifs); + + /* + * For 8187B, CARRIER_SENSE_COUNTER is in fact ack timeout + * register. In units of 4 us like eifs register + * ack_timeout = ack duration + plcp + difs + preamble + */ + ack_timeout = 112 + 48 + difs; + if (use_short_preamble) + ack_timeout += 72; + else + ack_timeout += 144; + rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, + DIV_ROUND_UP(ack_timeout, 4)); + + for (queue = 0; queue < 4; queue++) + rtl818x_iowrite8(priv, (u8 *) rtl8187b_ac_addr[queue], + priv->aifsn[queue] * priv->slot_time + + SIFS_TIME); + } else { + rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22); + if (use_short_slot) { + rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9); + rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14); + rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14); + } else { + rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14); + rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24); + rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24); + } + } +} + +static void rtl8187_bss_info_changed(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *info, + u64 changed) +{ + struct rtl8187_priv *priv = dev->priv; + struct rtl8187_vif *vif_priv; + int i; + u8 reg; + + vif_priv = (struct rtl8187_vif *)&vif->drv_priv; + + if (changed & BSS_CHANGED_BSSID) { + mutex_lock(&priv->conf_mutex); + for (i = 0; i < ETH_ALEN; i++) + rtl818x_iowrite8(priv, &priv->map->BSSID[i], + info->bssid[i]); + + if (priv->is_rtl8187b) + reg = RTL818X_MSR_ENEDCA; + else + reg = 0; + + if (is_valid_ether_addr(info->bssid)) { + if (vif->type == NL80211_IFTYPE_ADHOC) + reg |= RTL818X_MSR_ADHOC; + else + reg |= RTL818X_MSR_INFRA; + } + else + reg |= RTL818X_MSR_NO_LINK; + + rtl818x_iowrite8(priv, &priv->map->MSR, reg); + + mutex_unlock(&priv->conf_mutex); + } + + if (changed & (BSS_CHANGED_ERP_SLOT | BSS_CHANGED_ERP_PREAMBLE)) + rtl8187_conf_erp(priv, info->use_short_slot, + info->use_short_preamble); + + if (changed & BSS_CHANGED_BEACON_ENABLED) + vif_priv->enable_beacon = info->enable_beacon; + + if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) { + cancel_delayed_work_sync(&vif_priv->beacon_work); + if (vif_priv->enable_beacon) + schedule_work(&vif_priv->beacon_work.work); + } + +} + +static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev, + struct netdev_hw_addr_list *mc_list) +{ + return netdev_hw_addr_list_count(mc_list); +} + +static void rtl8187_configure_filter(struct ieee80211_hw *dev, + unsigned int changed_flags, + unsigned int *total_flags, + u64 multicast) +{ + struct rtl8187_priv *priv = dev->priv; + + if (changed_flags & FIF_FCSFAIL) + priv->rx_conf ^= RTL818X_RX_CONF_FCS; + if (changed_flags & FIF_CONTROL) + priv->rx_conf ^= RTL818X_RX_CONF_CTRL; + if (*total_flags & FIF_OTHER_BSS || + *total_flags & FIF_ALLMULTI || multicast > 0) + priv->rx_conf |= RTL818X_RX_CONF_MONITOR; + else + priv->rx_conf &= ~RTL818X_RX_CONF_MONITOR; + + *total_flags = 0; + + if (priv->rx_conf & RTL818X_RX_CONF_FCS) + *total_flags |= FIF_FCSFAIL; + if (priv->rx_conf & RTL818X_RX_CONF_CTRL) + *total_flags |= FIF_CONTROL; + if (priv->rx_conf & RTL818X_RX_CONF_MONITOR) { + *total_flags |= FIF_OTHER_BSS; + *total_flags |= FIF_ALLMULTI; + } + + rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf); +} + +static int rtl8187_conf_tx(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + unsigned int link_id, u16 queue, + const struct ieee80211_tx_queue_params *params) +{ + struct rtl8187_priv *priv = dev->priv; + u8 cw_min, cw_max; + + if (queue > 3) + return -EINVAL; + + cw_min = fls(params->cw_min); + cw_max = fls(params->cw_max); + + if (priv->is_rtl8187b) { + priv->aifsn[queue] = params->aifs; + + /* + * This is the structure of AC_*_PARAM registers in 8187B: + * - TXOP limit field, bit offset = 16 + * - ECWmax, bit offset = 12 + * - ECWmin, bit offset = 8 + * - AIFS, bit offset = 0 + */ + rtl818x_iowrite32(priv, rtl8187b_ac_addr[queue], + (params->txop << 16) | (cw_max << 12) | + (cw_min << 8) | (params->aifs * + priv->slot_time + SIFS_TIME)); + } else { + if (queue != 0) + return -EINVAL; + + rtl818x_iowrite8(priv, &priv->map->CW_VAL, + cw_min | (cw_max << 4)); + } + return 0; +} + + +static const struct ieee80211_ops rtl8187_ops = { + .tx = rtl8187_tx, + .start = rtl8187_start, + .stop = rtl8187_stop, + .add_interface = rtl8187_add_interface, + .remove_interface = rtl8187_remove_interface, + .config = rtl8187_config, + .bss_info_changed = rtl8187_bss_info_changed, + .prepare_multicast = rtl8187_prepare_multicast, + .configure_filter = rtl8187_configure_filter, + .conf_tx = rtl8187_conf_tx, + .rfkill_poll = rtl8187_rfkill_poll, + .get_tsf = rtl8187_get_tsf, +}; + +static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom) +{ + struct ieee80211_hw *dev = eeprom->data; + struct rtl8187_priv *priv = dev->priv; + u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD); + + eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE; + eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ; + eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK; + eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS; +} + +static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom) +{ + struct ieee80211_hw *dev = eeprom->data; + struct rtl8187_priv *priv = dev->priv; + u8 reg = RTL818X_EEPROM_CMD_PROGRAM; + + if (eeprom->reg_data_in) + reg |= RTL818X_EEPROM_CMD_WRITE; + if (eeprom->reg_data_out) + reg |= RTL818X_EEPROM_CMD_READ; + if (eeprom->reg_data_clock) + reg |= RTL818X_EEPROM_CMD_CK; + if (eeprom->reg_chip_select) + reg |= RTL818X_EEPROM_CMD_CS; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg); + udelay(10); +} + +static int rtl8187_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct ieee80211_hw *dev; + struct rtl8187_priv *priv; + struct eeprom_93cx6 eeprom; + struct ieee80211_channel *channel; + const char *chip_name; + u16 txpwr, reg; + u16 product_id = le16_to_cpu(udev->descriptor.idProduct); + int err, i; + u8 mac_addr[ETH_ALEN]; + + dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops); + if (!dev) { + printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n"); + return -ENOMEM; + } + + priv = dev->priv; + priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B); + + /* allocate "DMA aware" buffer for register accesses */ + priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL); + if (!priv->io_dmabuf) { + err = -ENOMEM; + goto err_free_dev; + } + mutex_init(&priv->io_mutex); + mutex_init(&priv->conf_mutex); + + SET_IEEE80211_DEV(dev, &intf->dev); + usb_set_intfdata(intf, dev); + priv->udev = udev; + + usb_get_dev(udev); + + skb_queue_head_init(&priv->rx_queue); + + BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels)); + BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates)); + + memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels)); + memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates)); + priv->map = (struct rtl818x_csr *)0xFF00; + + priv->band.band = NL80211_BAND_2GHZ; + priv->band.channels = priv->channels; + priv->band.n_channels = ARRAY_SIZE(rtl818x_channels); + priv->band.bitrates = priv->rates; + priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates); + dev->wiphy->bands[NL80211_BAND_2GHZ] = &priv->band; + + + ieee80211_hw_set(dev, RX_INCLUDES_FCS); + ieee80211_hw_set(dev, HOST_BROADCAST_PS_BUFFERING); + ieee80211_hw_set(dev, SIGNAL_DBM); + /* Initialize rate-control variables */ + dev->max_rates = 1; + dev->max_rate_tries = RETRY_COUNT; + + eeprom.data = dev; + eeprom.register_read = rtl8187_eeprom_register_read; + eeprom.register_write = rtl8187_eeprom_register_write; + if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6)) + eeprom.width = PCI_EEPROM_WIDTH_93C66; + else + eeprom.width = PCI_EEPROM_WIDTH_93C46; + + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + udelay(10); + + eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR, + (__le16 __force *)mac_addr, 3); + if (!is_valid_ether_addr(mac_addr)) { + printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly " + "generated MAC address\n"); + eth_random_addr(mac_addr); + } + SET_IEEE80211_PERM_ADDR(dev, mac_addr); + + channel = priv->channels; + for (i = 0; i < 3; i++) { + eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i, + &txpwr); + (*channel++).hw_value = txpwr & 0xFF; + (*channel++).hw_value = txpwr >> 8; + } + for (i = 0; i < 2; i++) { + eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i, + &txpwr); + (*channel++).hw_value = txpwr & 0xFF; + (*channel++).hw_value = txpwr >> 8; + } + + eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE, + &priv->txpwr_base); + + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~1; + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg | 1); + /* 0 means asic B-cut, we should use SW 3 wire + * bit-by-bit banging for radio. 1 means we can use + * USB specific request to write radio registers */ + priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3; + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + if (!priv->is_rtl8187b) { + u32 reg32; + reg32 = rtl818x_ioread32(priv, &priv->map->TX_CONF); + reg32 &= RTL818X_TX_CONF_HWVER_MASK; + switch (reg32) { + case RTL818X_TX_CONF_R8187vD_B: + /* Some RTL8187B devices have a USB ID of 0x8187 + * detect them here */ + chip_name = "RTL8187BvB(early)"; + priv->is_rtl8187b = 1; + priv->hw_rev = RTL8187BvB; + break; + case RTL818X_TX_CONF_R8187vD: + chip_name = "RTL8187vD"; + break; + default: + chip_name = "RTL8187vB (default)"; + } + } else { + /* + * Force USB request to write radio registers for 8187B, Realtek + * only uses it in their sources + */ + /*if (priv->asic_rev == 0) { + printk(KERN_WARNING "rtl8187: Forcing use of USB " + "requests to write to radio registers\n"); + priv->asic_rev = 1; + }*/ + switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) { + case RTL818X_R8187B_B: + chip_name = "RTL8187BvB"; + priv->hw_rev = RTL8187BvB; + break; + case RTL818X_R8187B_D: + chip_name = "RTL8187BvD"; + priv->hw_rev = RTL8187BvD; + break; + case RTL818X_R8187B_E: + chip_name = "RTL8187BvE"; + priv->hw_rev = RTL8187BvE; + break; + default: + chip_name = "RTL8187BvB (default)"; + priv->hw_rev = RTL8187BvB; + } + } + + if (!priv->is_rtl8187b) { + for (i = 0; i < 2; i++) { + eeprom_93cx6_read(&eeprom, + RTL8187_EEPROM_TXPWR_CHAN_6 + i, + &txpwr); + (*channel++).hw_value = txpwr & 0xFF; + (*channel++).hw_value = txpwr >> 8; + } + } else { + eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6, + &txpwr); + (*channel++).hw_value = txpwr & 0xFF; + + eeprom_93cx6_read(&eeprom, 0x0A, &txpwr); + (*channel++).hw_value = txpwr & 0xFF; + + eeprom_93cx6_read(&eeprom, 0x1C, &txpwr); + (*channel++).hw_value = txpwr & 0xFF; + (*channel++).hw_value = txpwr >> 8; + } + /* Handle the differing rfkill GPIO bit in different models */ + priv->rfkill_mask = RFKILL_MASK_8187_89_97; + if (product_id == 0x8197 || product_id == 0x8198) { + eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_SELECT_GPIO, ®); + if (reg & 0xFF00) + priv->rfkill_mask = RFKILL_MASK_8198; + } + dev->vif_data_size = sizeof(struct rtl8187_vif); + dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) ; + + wiphy_ext_feature_set(dev->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); + + if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b) + printk(KERN_INFO "rtl8187: inconsistency between id with OEM" + " info!\n"); + + priv->rf = rtl8187_detect_rf(dev); + dev->extra_tx_headroom = (!priv->is_rtl8187b) ? + sizeof(struct rtl8187_tx_hdr) : + sizeof(struct rtl8187b_tx_hdr); + if (!priv->is_rtl8187b) + dev->queues = 1; + else + dev->queues = 4; + + err = ieee80211_register_hw(dev); + if (err) { + printk(KERN_ERR "rtl8187: Cannot register device\n"); + goto err_free_dmabuf; + } + skb_queue_head_init(&priv->b_tx_status.queue); + + wiphy_info(dev->wiphy, "hwaddr %pM, %s V%d + %s, rfkill mask %d\n", + mac_addr, chip_name, priv->asic_rev, priv->rf->name, + priv->rfkill_mask); + +#ifdef CONFIG_RTL8187_LEDS + eeprom_93cx6_read(&eeprom, 0x3F, ®); + reg &= 0xFF; + rtl8187_leds_init(dev, reg); +#endif + rtl8187_rfkill_init(dev); + + return 0; + + err_free_dmabuf: + kfree(priv->io_dmabuf); + usb_set_intfdata(intf, NULL); + usb_put_dev(udev); + err_free_dev: + ieee80211_free_hw(dev); + return err; +} + +static void rtl8187_disconnect(struct usb_interface *intf) +{ + struct ieee80211_hw *dev = usb_get_intfdata(intf); + struct rtl8187_priv *priv; + + if (!dev) + return; + +#ifdef CONFIG_RTL8187_LEDS + rtl8187_leds_exit(dev); +#endif + rtl8187_rfkill_exit(dev); + ieee80211_unregister_hw(dev); + + priv = dev->priv; + usb_reset_device(priv->udev); + usb_put_dev(interface_to_usbdev(intf)); + kfree(priv->io_dmabuf); + ieee80211_free_hw(dev); +} + +static struct usb_driver rtl8187_driver = { + .name = KBUILD_MODNAME, + .id_table = rtl8187_table, + .probe = rtl8187_probe, + .disconnect = rtl8187_disconnect, + .disable_hub_initiated_lpm = 1, +}; + +module_usb_driver(rtl8187_driver); diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c new file mode 100644 index 000000000..f7d95c962 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Linux LED driver for RTL8187 + * + * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net> + * + * Based on the LED handling in the r8187 driver, which is: + * Copyright (c) Realtek Semiconductor Corp. All rights reserved. + * + * Thanks to Realtek for their support! + */ + +#ifdef CONFIG_RTL8187_LEDS + +#include <net/mac80211.h> +#include <linux/usb.h> +#include <linux/eeprom_93cx6.h> + +#include "rtl8187.h" +#include "leds.h" + +static void led_turn_on(struct work_struct *work) +{ + /* As this routine does read/write operations on the hardware, it must + * be run from a work queue. + */ + u8 reg; + struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv, + led_on.work); + struct rtl8187_led *led = &priv->led_tx; + + /* Don't change the LED, when the device is down. */ + if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED) + return ; + + /* Skip if the LED is not registered. */ + if (!led->dev) + return; + mutex_lock(&priv->conf_mutex); + switch (led->ledpin) { + case LED_PIN_GPIO0: + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00); + break; + case LED_PIN_LED0: + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + break; + case LED_PIN_LED1: + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + break; + case LED_PIN_HW: + default: + break; + } + mutex_unlock(&priv->conf_mutex); +} + +static void led_turn_off(struct work_struct *work) +{ + /* As this routine does read/write operations on the hardware, it must + * be run from a work queue. + */ + u8 reg; + struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv, + led_off.work); + struct rtl8187_led *led = &priv->led_tx; + + /* Don't change the LED, when the device is down. */ + if (!priv->vif || priv->vif->type == NL80211_IFTYPE_UNSPECIFIED) + return ; + + /* Skip if the LED is not registered. */ + if (!led->dev) + return; + mutex_lock(&priv->conf_mutex); + switch (led->ledpin) { + case LED_PIN_GPIO0: + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01); + rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01); + break; + case LED_PIN_LED0: + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + break; + case LED_PIN_LED1: + reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5); + rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg); + break; + case LED_PIN_HW: + default: + break; + } + mutex_unlock(&priv->conf_mutex); +} + +/* Callback from the LED subsystem. */ +static void rtl8187_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led, + led_dev); + struct ieee80211_hw *hw = led->dev; + struct rtl8187_priv *priv; + static bool radio_on; + + if (!hw) + return; + priv = hw->priv; + if (led->is_radio) { + if (brightness == LED_FULL) { + ieee80211_queue_delayed_work(hw, &priv->led_on, 0); + radio_on = true; + } else if (radio_on) { + radio_on = false; + cancel_delayed_work(&priv->led_on); + ieee80211_queue_delayed_work(hw, &priv->led_off, 0); + } + } else if (radio_on) { + if (brightness == LED_OFF) { + ieee80211_queue_delayed_work(hw, &priv->led_off, 0); + /* The LED is off for 1/20 sec - it just blinks. */ + ieee80211_queue_delayed_work(hw, &priv->led_on, + HZ / 20); + } else + ieee80211_queue_delayed_work(hw, &priv->led_on, 0); + } +} + +static int rtl8187_register_led(struct ieee80211_hw *dev, + struct rtl8187_led *led, const char *name, + const char *default_trigger, u8 ledpin, + bool is_radio) +{ + int err; + struct rtl8187_priv *priv = dev->priv; + + if (led->dev) + return -EEXIST; + if (!default_trigger) + return -EINVAL; + led->dev = dev; + led->ledpin = ledpin; + led->is_radio = is_radio; + strscpy(led->name, name, sizeof(led->name)); + + led->led_dev.name = led->name; + led->led_dev.default_trigger = default_trigger; + led->led_dev.brightness_set = rtl8187_led_brightness_set; + + err = led_classdev_register(&priv->udev->dev, &led->led_dev); + if (err) { + printk(KERN_INFO "LEDs: Failed to register %s\n", name); + led->dev = NULL; + return err; + } + return 0; +} + +static void rtl8187_unregister_led(struct rtl8187_led *led) +{ + struct ieee80211_hw *hw = led->dev; + struct rtl8187_priv *priv = hw->priv; + + led_classdev_unregister(&led->led_dev); + flush_delayed_work(&priv->led_off); + led->dev = NULL; +} + +void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid) +{ + struct rtl8187_priv *priv = dev->priv; + char name[RTL8187_LED_MAX_NAME_LEN + 1]; + u8 ledpin; + int err; + + /* According to the vendor driver, the LED operation depends on the + * customer ID encoded in the EEPROM + */ + printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid); + switch (custid) { + case EEPROM_CID_RSVD0: + case EEPROM_CID_RSVD1: + case EEPROM_CID_SERCOMM_PS: + case EEPROM_CID_QMI: + case EEPROM_CID_DELL: + case EEPROM_CID_TOSHIBA: + ledpin = LED_PIN_GPIO0; + break; + case EEPROM_CID_ALPHA0: + ledpin = LED_PIN_LED0; + break; + case EEPROM_CID_HW: + ledpin = LED_PIN_HW; + break; + default: + ledpin = LED_PIN_GPIO0; + } + + INIT_DELAYED_WORK(&priv->led_on, led_turn_on); + INIT_DELAYED_WORK(&priv->led_off, led_turn_off); + + snprintf(name, sizeof(name), + "rtl8187-%s::radio", wiphy_name(dev->wiphy)); + err = rtl8187_register_led(dev, &priv->led_radio, name, + ieee80211_get_radio_led_name(dev), ledpin, true); + if (err) + return; + + snprintf(name, sizeof(name), + "rtl8187-%s::tx", wiphy_name(dev->wiphy)); + err = rtl8187_register_led(dev, &priv->led_tx, name, + ieee80211_get_tx_led_name(dev), ledpin, false); + if (err) + goto err_tx; + + snprintf(name, sizeof(name), + "rtl8187-%s::rx", wiphy_name(dev->wiphy)); + err = rtl8187_register_led(dev, &priv->led_rx, name, + ieee80211_get_rx_led_name(dev), ledpin, false); + if (!err) + return; + + /* registration of RX LED failed - unregister */ + rtl8187_unregister_led(&priv->led_tx); +err_tx: + rtl8187_unregister_led(&priv->led_radio); +} + +void rtl8187_leds_exit(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + + rtl8187_unregister_led(&priv->led_radio); + rtl8187_unregister_led(&priv->led_rx); + rtl8187_unregister_led(&priv->led_tx); + cancel_delayed_work_sync(&priv->led_off); + cancel_delayed_work_sync(&priv->led_on); +} +#endif /* def CONFIG_RTL8187_LEDS */ + diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.h b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.h new file mode 100644 index 000000000..5565cbf92 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Definitions for RTL8187 leds + * + * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net> + * + * Based on the LED handling in the r8187 driver, which is: + * Copyright (c) Realtek Semiconductor Corp. All rights reserved. + */ + +#ifndef RTL8187_LED_H +#define RTL8187_LED_H + +#ifdef CONFIG_RTL8187_LEDS + +#define RTL8187_LED_MAX_NAME_LEN 21 + +#include <linux/leds.h> +#include <linux/types.h> + +enum { + LED_PIN_LED0, + LED_PIN_LED1, + LED_PIN_GPIO0, + LED_PIN_HW +}; + +enum { + EEPROM_CID_RSVD0 = 0x00, + EEPROM_CID_RSVD1 = 0xFF, + EEPROM_CID_ALPHA0 = 0x01, + EEPROM_CID_SERCOMM_PS = 0x02, + EEPROM_CID_HW = 0x03, + EEPROM_CID_TOSHIBA = 0x04, + EEPROM_CID_QMI = 0x07, + EEPROM_CID_DELL = 0x08 +}; + +struct rtl8187_led { + struct ieee80211_hw *dev; + /* The LED class device */ + struct led_classdev led_dev; + /* The pin/method used to control the led */ + u8 ledpin; + /* The unique name string for this LED device. */ + char name[RTL8187_LED_MAX_NAME_LEN + 1]; + /* If the LED is radio or tx/rx */ + bool is_radio; +}; + +void rtl8187_leds_init(struct ieee80211_hw *dev, u16 code); +void rtl8187_leds_exit(struct ieee80211_hw *dev); + +#endif /* def CONFIG_RTL8187_LEDS */ + +#endif /* RTL8187_LED_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.c new file mode 100644 index 000000000..c57a4742b --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.c @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Linux RFKILL support for RTL8187 + * + * Copyright (c) 2009 Herton Ronaldo Krzesinski <herton@mandriva.com.br> + * + * Based on the RFKILL handling in the r8187 driver, which is: + * Copyright (c) Realtek Semiconductor Corp. All rights reserved. + * + * Thanks to Realtek for their support! + */ + +#include <linux/types.h> +#include <linux/usb.h> +#include <net/mac80211.h> + +#include "rtl8187.h" +#include "rfkill.h" + +static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv) +{ + u8 gpio; + + gpio = rtl818x_ioread8(priv, &priv->map->GPIO0); + rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~priv->rfkill_mask); + gpio = rtl818x_ioread8(priv, &priv->map->GPIO1); + + return gpio & priv->rfkill_mask; +} + +void rtl8187_rfkill_init(struct ieee80211_hw *hw) +{ + struct rtl8187_priv *priv = hw->priv; + + priv->rfkill_off = rtl8187_is_radio_enabled(priv); + printk(KERN_INFO "rtl8187: wireless switch is %s\n", + priv->rfkill_off ? "on" : "off"); + wiphy_rfkill_set_hw_state(hw->wiphy, !priv->rfkill_off); + wiphy_rfkill_start_polling(hw->wiphy); +} + +void rtl8187_rfkill_poll(struct ieee80211_hw *hw) +{ + bool enabled; + struct rtl8187_priv *priv = hw->priv; + + mutex_lock(&priv->conf_mutex); + enabled = rtl8187_is_radio_enabled(priv); + if (unlikely(enabled != priv->rfkill_off)) { + priv->rfkill_off = enabled; + printk(KERN_INFO "rtl8187: wireless radio switch turned %s\n", + enabled ? "on" : "off"); + wiphy_rfkill_set_hw_state(hw->wiphy, !enabled); + } + mutex_unlock(&priv->conf_mutex); +} + +void rtl8187_rfkill_exit(struct ieee80211_hw *hw) +{ + wiphy_rfkill_stop_polling(hw->wiphy); +} diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.h b/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.h new file mode 100644 index 000000000..c493e59ee --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef RTL8187_RFKILL_H +#define RTL8187_RFKILL_H + +void rtl8187_rfkill_init(struct ieee80211_hw *hw); +void rtl8187_rfkill_poll(struct ieee80211_hw *hw); +void rtl8187_rfkill_exit(struct ieee80211_hw *hw); + +#endif /* RTL8187_RFKILL_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.h b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.h new file mode 100644 index 000000000..36f3460cc --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.h @@ -0,0 +1,210 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Definitions for RTL8187 hardware + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8187 driver, which is: + * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al. + */ + +#ifndef RTL8187_H +#define RTL8187_H + +#include <linux/cache.h> + +#include "rtl818x.h" +#include "leds.h" + +#define RTL8187_EEPROM_TXPWR_BASE 0x05 +#define RTL8187_EEPROM_MAC_ADDR 0x07 +#define RTL8187_EEPROM_TXPWR_CHAN_1 0x16 /* 3 channels */ +#define RTL8187_EEPROM_TXPWR_CHAN_6 0x1B /* 2 channels */ +#define RTL8187_EEPROM_TXPWR_CHAN_4 0x3D /* 2 channels */ +#define RTL8187_EEPROM_SELECT_GPIO 0x3B + +#define RTL8187_REQT_READ 0xC0 +#define RTL8187_REQT_WRITE 0x40 +#define RTL8187_REQ_GET_REG 0x05 +#define RTL8187_REQ_SET_REG 0x05 + +#define RTL8187_MAX_RX 0x9C4 + +#define RFKILL_MASK_8187_89_97 0x2 +#define RFKILL_MASK_8198 0x4 + +#define RETRY_COUNT 7 + +struct rtl8187_rx_info { + struct urb *urb; + struct ieee80211_hw *dev; +}; + +struct rtl8187_rx_hdr { + __le32 flags; + u8 noise; + u8 signal; + u8 agc; + u8 reserved; + __le64 mac_time; +} __packed; + +struct rtl8187b_rx_hdr { + __le32 flags; + __le64 mac_time; + u8 sq; + u8 rssi; + u8 agc; + u8 flags2; + __le16 snr_long2end; + s8 pwdb_g12; + u8 fot; +} __packed; + +/* {rtl8187,rtl8187b}_tx_info is in skb */ + +struct rtl8187_tx_hdr { + __le32 flags; + __le16 rts_duration; + __le16 len; + __le32 retry; +} __packed; + +struct rtl8187b_tx_hdr { + __le32 flags; + __le16 rts_duration; + __le16 len; + __le32 unused_1; + __le16 unused_2; + __le16 tx_duration; + __le32 unused_3; + __le32 retry; + __le32 unused_4[2]; +} __packed; + +enum { + DEVICE_RTL8187, + DEVICE_RTL8187B +}; + +struct rtl8187_vif { + struct ieee80211_hw *dev; + + /* beaconing */ + struct delayed_work beacon_work; + bool enable_beacon; +}; + +struct rtl8187_priv { + /* common between rtl818x drivers */ + struct rtl818x_csr *map; + const struct rtl818x_rf_ops *rf; + struct ieee80211_vif *vif; + + /* The mutex protects the TX loopback state. + * Any attempt to set channels concurrently locks the device. + */ + struct mutex conf_mutex; + + /* rtl8187 specific */ + struct ieee80211_channel channels[14]; + struct ieee80211_rate rates[12]; + struct ieee80211_supported_band band; + struct usb_device *udev; + u32 rx_conf; + struct usb_anchor anchored; + struct delayed_work work; + struct ieee80211_hw *dev; +#ifdef CONFIG_RTL8187_LEDS + struct rtl8187_led led_radio; + struct rtl8187_led led_tx; + struct rtl8187_led led_rx; + struct delayed_work led_on; + struct delayed_work led_off; +#endif + u16 txpwr_base; + u8 asic_rev; + u8 is_rtl8187b; + enum { + RTL8187BvB, + RTL8187BvD, + RTL8187BvE + } hw_rev; + struct sk_buff_head rx_queue; + u8 signal; + u8 noise; + u8 slot_time; + u8 aifsn[4]; + u8 rfkill_mask; + struct { + union { + __le64 buf; + u8 dummy1[L1_CACHE_BYTES]; + } ____cacheline_aligned; + struct sk_buff_head queue; + } b_tx_status; /* This queue is used by both -b and non-b devices */ + struct mutex io_mutex; + union { + u8 bits8; + __le16 bits16; + __le32 bits32; + u8 dummy2[L1_CACHE_BYTES]; + } *io_dmabuf ____cacheline_aligned; + bool rfkill_off; + u16 seqno; +}; + +void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); + +u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv, + u8 *addr, u8 idx); + +static inline u8 rtl818x_ioread8(struct rtl8187_priv *priv, u8 *addr) +{ + return rtl818x_ioread8_idx(priv, addr, 0); +} + +u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv, + __le16 *addr, u8 idx); + +static inline u16 rtl818x_ioread16(struct rtl8187_priv *priv, __le16 *addr) +{ + return rtl818x_ioread16_idx(priv, addr, 0); +} + +u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv, + __le32 *addr, u8 idx); + +static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr) +{ + return rtl818x_ioread32_idx(priv, addr, 0); +} + +void rtl818x_iowrite8_idx(struct rtl8187_priv *priv, + u8 *addr, u8 val, u8 idx); + +static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val) +{ + rtl818x_iowrite8_idx(priv, addr, val, 0); +} + +void rtl818x_iowrite16_idx(struct rtl8187_priv *priv, + __le16 *addr, u16 val, u8 idx); + +static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr, + u16 val) +{ + rtl818x_iowrite16_idx(priv, addr, val, 0); +} + +void rtl818x_iowrite32_idx(struct rtl8187_priv *priv, + __le32 *addr, u32 val, u8 idx); + +static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr, + u32 val) +{ + rtl818x_iowrite32_idx(priv, addr, val, 0); +} + +#endif /* RTL8187_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c new file mode 100644 index 000000000..4efab907a --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c @@ -0,0 +1,1044 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Radio tuning for RTL8225 on RTL8187 + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8187 driver, which is: + * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al. + * + * Magic delays, register offsets, and phy value tables below are + * taken from the original r8187 driver sources. Thanks to Realtek + * for their support! + */ + +#include <linux/usb.h> +#include <net/mac80211.h> + +#include "rtl8187.h" +#include "rtl8225.h" + +u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv, + u8 *addr, u8 idx) +{ + u8 val; + + mutex_lock(&priv->io_mutex); + usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), + RTL8187_REQ_GET_REG, RTL8187_REQT_READ, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits8, sizeof(val), 500); + + val = priv->io_dmabuf->bits8; + mutex_unlock(&priv->io_mutex); + + return val; +} + +u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv, + __le16 *addr, u8 idx) +{ + __le16 val; + + mutex_lock(&priv->io_mutex); + usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), + RTL8187_REQ_GET_REG, RTL8187_REQT_READ, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits16, sizeof(val), 500); + + val = priv->io_dmabuf->bits16; + mutex_unlock(&priv->io_mutex); + + return le16_to_cpu(val); +} + +u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv, + __le32 *addr, u8 idx) +{ + __le32 val; + + mutex_lock(&priv->io_mutex); + usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), + RTL8187_REQ_GET_REG, RTL8187_REQT_READ, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits32, sizeof(val), 500); + + val = priv->io_dmabuf->bits32; + mutex_unlock(&priv->io_mutex); + + return le32_to_cpu(val); +} + +void rtl818x_iowrite8_idx(struct rtl8187_priv *priv, + u8 *addr, u8 val, u8 idx) +{ + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits8 = val; + usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), + RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits8, sizeof(val), 500); + + mutex_unlock(&priv->io_mutex); +} + +void rtl818x_iowrite16_idx(struct rtl8187_priv *priv, + __le16 *addr, u16 val, u8 idx) +{ + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits16 = cpu_to_le16(val); + usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), + RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits16, sizeof(val), 500); + + mutex_unlock(&priv->io_mutex); +} + +void rtl818x_iowrite32_idx(struct rtl8187_priv *priv, + __le32 *addr, u32 val, u8 idx) +{ + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits32 = cpu_to_le32(val); + usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), + RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits32, sizeof(val), 500); + + mutex_unlock(&priv->io_mutex); +} + +static void rtl8225_write_bitbang(struct ieee80211_hw *dev, u8 addr, u16 data) +{ + struct rtl8187_priv *priv = dev->priv; + u16 reg80, reg84, reg82; + u32 bangdata; + int i; + + bangdata = (data << 4) | (addr & 0xf); + + reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3; + reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable); + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7); + + reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7); + udelay(10); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80); + udelay(10); + + for (i = 15; i >= 0; i--) { + u16 reg = reg80 | (bangdata & (1 << i)) >> i; + + if (i & 1) + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1)); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1)); + + if (!(i & 1)) + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + udelay(10); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84); +} + +static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data) +{ + struct rtl8187_priv *priv = dev->priv; + u16 reg80, reg82, reg84; + + reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput); + reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable); + reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect); + + reg80 &= ~(0x3 << 2); + reg84 &= ~0xF; + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x0007); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x0007); + udelay(10); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + udelay(2); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80); + udelay(10); + + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits16 = data; + usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), + RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, + addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data), + 500); + + mutex_unlock(&priv->io_mutex); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + udelay(10); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84); +} + +static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data) +{ + struct rtl8187_priv *priv = dev->priv; + + if (priv->asic_rev) + rtl8225_write_8051(dev, addr, cpu_to_le16(data)); + else + rtl8225_write_bitbang(dev, addr, data); +} + +static u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr) +{ + struct rtl8187_priv *priv = dev->priv; + u16 reg80, reg82, reg84, out; + int i; + + reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput); + reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable); + reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect); + + reg80 &= ~0xF; + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F); + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); + udelay(4); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80); + udelay(5); + + for (i = 4; i >= 0; i--) { + u16 reg = reg80 | ((addr >> i) & 1); + + if (!(i & 1)) { + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + udelay(1); + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg | (1 << 1)); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg | (1 << 1)); + udelay(2); + + if (i & 1) { + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg); + udelay(1); + } + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + udelay(2); + + out = 0; + for (i = 11; i >= 0; i--) { + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + udelay(1); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + udelay(2); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 1)); + udelay(2); + + if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1)) + out |= 1 << i; + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3)); + udelay(2); + } + + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, + reg80 | (1 << 3) | (1 << 2)); + udelay(2); + + rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82); + rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84); + rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0); + + return out; +} + +static const u16 rtl8225bcd_rxgain[] = { + 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409, + 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541, + 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583, + 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644, + 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688, + 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745, + 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789, + 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793, + 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d, + 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9, + 0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3, + 0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb +}; + +static const u8 rtl8225_agc[] = { + 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, + 0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96, + 0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e, + 0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86, + 0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e, + 0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36, + 0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e, + 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26, + 0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e, + 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16, + 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e, + 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06, + 0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01 +}; + +static const u8 rtl8225_gain[] = { + 0x23, 0x88, 0x7c, 0xa5, /* -82dBm */ + 0x23, 0x88, 0x7c, 0xb5, /* -82dBm */ + 0x23, 0x88, 0x7c, 0xc5, /* -82dBm */ + 0x33, 0x80, 0x79, 0xc5, /* -78dBm */ + 0x43, 0x78, 0x76, 0xc5, /* -74dBm */ + 0x53, 0x60, 0x73, 0xc5, /* -70dBm */ + 0x63, 0x58, 0x70, 0xc5, /* -66dBm */ +}; + +static const u8 rtl8225_threshold[] = { + 0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd +}; + +static const u8 rtl8225_tx_gain_cck_ofdm[] = { + 0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e +}; + +static const u8 rtl8225_tx_power_cck[] = { + 0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02, + 0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02, + 0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02, + 0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02, + 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03, + 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03 +}; + +static const u8 rtl8225_tx_power_cck_ch14[] = { + 0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00, + 0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00, + 0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00, + 0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00, + 0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00, + 0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00 +}; + +static const u8 rtl8225_tx_power_ofdm[] = { + 0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4 +}; + +static const u32 rtl8225_chan[] = { + 0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c, + 0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72 +}; + +static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel) +{ + struct rtl8187_priv *priv = dev->priv; + u8 cck_power, ofdm_power; + const u8 *tmp; + u32 reg; + int i; + + cck_power = priv->channels[channel - 1].hw_value & 0xF; + ofdm_power = priv->channels[channel - 1].hw_value >> 4; + + cck_power = min(cck_power, (u8)11); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, + rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1); + + if (channel == 14) + tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8]; + else + tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8]; + + for (i = 0; i < 8; i++) + rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++); + + msleep(1); // FIXME: optional? + + /* anaparam2 on */ + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, + RTL8187_RTL8225_ANAPARAM2_ON); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + rtl8225_write_phy_ofdm(dev, 2, 0x42); + rtl8225_write_phy_ofdm(dev, 6, 0x00); + rtl8225_write_phy_ofdm(dev, 8, 0x00); + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, + rtl8225_tx_gain_cck_ofdm[ofdm_power / 6] >> 1); + + tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6]; + + rtl8225_write_phy_ofdm(dev, 5, *tmp); + rtl8225_write_phy_ofdm(dev, 7, *tmp); + + msleep(1); +} + +static void rtl8225_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + int i; + + rtl8225_write(dev, 0x0, 0x067); + rtl8225_write(dev, 0x1, 0xFE0); + rtl8225_write(dev, 0x2, 0x44D); + rtl8225_write(dev, 0x3, 0x441); + rtl8225_write(dev, 0x4, 0x486); + rtl8225_write(dev, 0x5, 0xBC0); + rtl8225_write(dev, 0x6, 0xAE6); + rtl8225_write(dev, 0x7, 0x82A); + rtl8225_write(dev, 0x8, 0x01F); + rtl8225_write(dev, 0x9, 0x334); + rtl8225_write(dev, 0xA, 0xFD4); + rtl8225_write(dev, 0xB, 0x391); + rtl8225_write(dev, 0xC, 0x050); + rtl8225_write(dev, 0xD, 0x6DB); + rtl8225_write(dev, 0xE, 0x029); + rtl8225_write(dev, 0xF, 0x914); msleep(100); + + rtl8225_write(dev, 0x2, 0xC4D); msleep(200); + rtl8225_write(dev, 0x2, 0x44D); msleep(200); + + if (!(rtl8225_read(dev, 6) & (1 << 7))) { + rtl8225_write(dev, 0x02, 0x0c4d); + msleep(200); + rtl8225_write(dev, 0x02, 0x044d); + msleep(100); + if (!(rtl8225_read(dev, 6) & (1 << 7))) + wiphy_warn(dev->wiphy, "RF Calibration Failed! %x\n", + rtl8225_read(dev, 6)); + } + + rtl8225_write(dev, 0x0, 0x127); + + for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) { + rtl8225_write(dev, 0x1, i + 1); + rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]); + } + + rtl8225_write(dev, 0x0, 0x027); + rtl8225_write(dev, 0x0, 0x22F); + + for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) { + rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]); + rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i); + } + + msleep(1); + + rtl8225_write_phy_ofdm(dev, 0x00, 0x01); + rtl8225_write_phy_ofdm(dev, 0x01, 0x02); + rtl8225_write_phy_ofdm(dev, 0x02, 0x42); + rtl8225_write_phy_ofdm(dev, 0x03, 0x00); + rtl8225_write_phy_ofdm(dev, 0x04, 0x00); + rtl8225_write_phy_ofdm(dev, 0x05, 0x00); + rtl8225_write_phy_ofdm(dev, 0x06, 0x40); + rtl8225_write_phy_ofdm(dev, 0x07, 0x00); + rtl8225_write_phy_ofdm(dev, 0x08, 0x40); + rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); + rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); + rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); + rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); + rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); + rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); + rtl8225_write_phy_ofdm(dev, 0x10, 0x84); + rtl8225_write_phy_ofdm(dev, 0x11, 0x06); + rtl8225_write_phy_ofdm(dev, 0x12, 0x20); + rtl8225_write_phy_ofdm(dev, 0x13, 0x20); + rtl8225_write_phy_ofdm(dev, 0x14, 0x00); + rtl8225_write_phy_ofdm(dev, 0x15, 0x40); + rtl8225_write_phy_ofdm(dev, 0x16, 0x00); + rtl8225_write_phy_ofdm(dev, 0x17, 0x40); + rtl8225_write_phy_ofdm(dev, 0x18, 0xef); + rtl8225_write_phy_ofdm(dev, 0x19, 0x19); + rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); + rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); + rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); + rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); + rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); + rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); + rtl8225_write_phy_ofdm(dev, 0x21, 0x27); + rtl8225_write_phy_ofdm(dev, 0x22, 0x16); + rtl8225_write_phy_ofdm(dev, 0x24, 0x46); + rtl8225_write_phy_ofdm(dev, 0x25, 0x20); + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); + rtl8225_write_phy_ofdm(dev, 0x27, 0x88); + + rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]); + rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]); + rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]); + rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]); + + rtl8225_write_phy_cck(dev, 0x00, 0x98); + rtl8225_write_phy_cck(dev, 0x03, 0x20); + rtl8225_write_phy_cck(dev, 0x04, 0x7e); + rtl8225_write_phy_cck(dev, 0x05, 0x12); + rtl8225_write_phy_cck(dev, 0x06, 0xfc); + rtl8225_write_phy_cck(dev, 0x07, 0x78); + rtl8225_write_phy_cck(dev, 0x08, 0x2e); + rtl8225_write_phy_cck(dev, 0x10, 0x9b); + rtl8225_write_phy_cck(dev, 0x11, 0x88); + rtl8225_write_phy_cck(dev, 0x12, 0x47); + rtl8225_write_phy_cck(dev, 0x13, 0xd0); + rtl8225_write_phy_cck(dev, 0x19, 0x00); + rtl8225_write_phy_cck(dev, 0x1a, 0xa0); + rtl8225_write_phy_cck(dev, 0x1b, 0x08); + rtl8225_write_phy_cck(dev, 0x40, 0x86); + rtl8225_write_phy_cck(dev, 0x41, 0x8d); + rtl8225_write_phy_cck(dev, 0x42, 0x15); + rtl8225_write_phy_cck(dev, 0x43, 0x18); + rtl8225_write_phy_cck(dev, 0x44, 0x1f); + rtl8225_write_phy_cck(dev, 0x45, 0x1e); + rtl8225_write_phy_cck(dev, 0x46, 0x1a); + rtl8225_write_phy_cck(dev, 0x47, 0x15); + rtl8225_write_phy_cck(dev, 0x48, 0x10); + rtl8225_write_phy_cck(dev, 0x49, 0x0a); + rtl8225_write_phy_cck(dev, 0x4a, 0x05); + rtl8225_write_phy_cck(dev, 0x4b, 0x02); + rtl8225_write_phy_cck(dev, 0x4c, 0x05); + + rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D); + + rtl8225_rf_set_tx_power(dev, 1); + + /* RX antenna default to A */ + rtl8225_write_phy_cck(dev, 0x10, 0x9b); /* B: 0xDB */ + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); /* B: 0x10 */ + + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */ + msleep(1); + rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002); + + /* set sensitivity */ + rtl8225_write(dev, 0x0c, 0x50); + rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]); + rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]); + rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]); + rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]); + rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[2]); +} + +static const u8 rtl8225z2_agc[] = { + 0x5e, 0x5e, 0x5e, 0x5e, 0x5d, 0x5b, 0x59, 0x57, 0x55, 0x53, 0x51, 0x4f, + 0x4d, 0x4b, 0x49, 0x47, 0x45, 0x43, 0x41, 0x3f, 0x3d, 0x3b, 0x39, 0x37, + 0x35, 0x33, 0x31, 0x2f, 0x2d, 0x2b, 0x29, 0x27, 0x25, 0x23, 0x21, 0x1f, + 0x1d, 0x1b, 0x19, 0x17, 0x15, 0x13, 0x11, 0x0f, 0x0d, 0x0b, 0x09, 0x07, + 0x05, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, + 0x19, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x26, 0x27, 0x27, 0x28, + 0x28, 0x29, 0x2a, 0x2a, 0x2a, 0x2b, 0x2b, 0x2b, 0x2c, 0x2c, 0x2c, 0x2d, + 0x2d, 0x2d, 0x2d, 0x2e, 0x2e, 0x2e, 0x2e, 0x2f, 0x2f, 0x2f, 0x30, 0x30, + 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, + 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31 +}; +static const u8 rtl8225z2_ofdm[] = { + 0x10, 0x0d, 0x01, 0x00, 0x14, 0xfb, 0xfb, 0x60, + 0x00, 0x60, 0x00, 0x00, 0x00, 0x5c, 0x00, 0x00, + 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xa8, 0x26, + 0x32, 0x33, 0x07, 0xa5, 0x6f, 0x55, 0xc8, 0xb3, + 0x0a, 0xe1, 0x2C, 0x8a, 0x86, 0x83, 0x34, 0x0f, + 0x4f, 0x24, 0x6f, 0xc2, 0x6b, 0x40, 0x80, 0x00, + 0xc0, 0xc1, 0x58, 0xf1, 0x00, 0xe4, 0x90, 0x3e, + 0x6d, 0x3c, 0xfb, 0x07 +}; + +static const u8 rtl8225z2_tx_power_cck_ch14[] = { + 0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00, + 0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00, + 0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00, + 0x30, 0x2f, 0x29, 0x15, 0x00, 0x00, 0x00, 0x00 +}; + +static const u8 rtl8225z2_tx_power_cck[] = { + 0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04, + 0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03, + 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03, + 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03 +}; + +static const u8 rtl8225z2_tx_gain_cck_ofdm[] = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, + 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, + 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, + 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, + 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23 +}; + +static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) +{ + struct rtl8187_priv *priv = dev->priv; + u8 cck_power, ofdm_power; + const u8 *tmp; + u32 reg; + int i; + + cck_power = priv->channels[channel - 1].hw_value & 0xF; + ofdm_power = priv->channels[channel - 1].hw_value >> 4; + + cck_power = min(cck_power, (u8)15); + cck_power += priv->txpwr_base & 0xF; + cck_power = min(cck_power, (u8)35); + + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; + ofdm_power += priv->txpwr_base >> 4; + ofdm_power = min(ofdm_power, (u8)35); + + if (channel == 14) + tmp = rtl8225z2_tx_power_cck_ch14; + else + tmp = rtl8225z2_tx_power_cck; + + for (i = 0; i < 8; i++) + rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++); + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, + rtl8225z2_tx_gain_cck_ofdm[cck_power]); + msleep(1); + + /* anaparam2 on */ + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); + reg = rtl818x_ioread8(priv, &priv->map->CONFIG3); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg | RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, + RTL8187_RTL8225_ANAPARAM2_ON); + rtl818x_iowrite8(priv, &priv->map->CONFIG3, + reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE); + rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + + rtl8225_write_phy_ofdm(dev, 2, 0x42); + rtl8225_write_phy_ofdm(dev, 5, 0x00); + rtl8225_write_phy_ofdm(dev, 6, 0x40); + rtl8225_write_phy_ofdm(dev, 7, 0x00); + rtl8225_write_phy_ofdm(dev, 8, 0x40); + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, + rtl8225z2_tx_gain_cck_ofdm[ofdm_power]); + msleep(1); +} + +static void rtl8225z2_b_rf_set_tx_power(struct ieee80211_hw *dev, int channel) +{ + struct rtl8187_priv *priv = dev->priv; + u8 cck_power, ofdm_power; + const u8 *tmp; + int i; + + cck_power = priv->channels[channel - 1].hw_value & 0xF; + ofdm_power = priv->channels[channel - 1].hw_value >> 4; + + cck_power += (priv->hw_rev == RTL8187BvB) ? 0 : 7; + cck_power += priv->txpwr_base & 0xF; + cck_power = min(cck_power, (u8)35); + + if (ofdm_power > 15) + ofdm_power = (priv->hw_rev == RTL8187BvB) ? 17 : 25; + else + ofdm_power += (priv->hw_rev == RTL8187BvB) ? 2 : 10; + ofdm_power += (priv->txpwr_base >> 4) & 0xF; + ofdm_power = min(ofdm_power, (u8)35); + + if (channel == 14) + tmp = rtl8225z2_tx_power_cck_ch14; + else + tmp = rtl8225z2_tx_power_cck; + + if (priv->hw_rev == RTL8187BvB) { + if (cck_power <= 6) + ; /* do nothing */ + else if (cck_power <= 11) + tmp += 8; + else + tmp += 16; + } else { + if (cck_power <= 5) + ; /* do nothing */ + else if (cck_power <= 11) + tmp += 8; + else if (cck_power <= 17) + tmp += 16; + else + tmp += 24; + } + + for (i = 0; i < 8; i++) + rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++); + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, + rtl8225z2_tx_gain_cck_ofdm[cck_power] << 1); + msleep(1); + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, + rtl8225z2_tx_gain_cck_ofdm[ofdm_power] << 1); + if (priv->hw_rev == RTL8187BvB) { + if (ofdm_power <= 11) { + rtl8225_write_phy_ofdm(dev, 0x87, 0x60); + rtl8225_write_phy_ofdm(dev, 0x89, 0x60); + } else { + rtl8225_write_phy_ofdm(dev, 0x87, 0x5c); + rtl8225_write_phy_ofdm(dev, 0x89, 0x5c); + } + } else { + if (ofdm_power <= 11) { + rtl8225_write_phy_ofdm(dev, 0x87, 0x5c); + rtl8225_write_phy_ofdm(dev, 0x89, 0x5c); + } else if (ofdm_power <= 17) { + rtl8225_write_phy_ofdm(dev, 0x87, 0x54); + rtl8225_write_phy_ofdm(dev, 0x89, 0x54); + } else { + rtl8225_write_phy_ofdm(dev, 0x87, 0x50); + rtl8225_write_phy_ofdm(dev, 0x89, 0x50); + } + } + msleep(1); +} + +static const u16 rtl8225z2_rxgain[] = { + 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409, + 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541, + 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583, + 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644, + 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688, + 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745, + 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789, + 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793, + 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d, + 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9, + 0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3, + 0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb +}; + +static const u8 rtl8225z2_gain_bg[] = { + 0x23, 0x15, 0xa5, /* -82-1dBm */ + 0x23, 0x15, 0xb5, /* -82-2dBm */ + 0x23, 0x15, 0xc5, /* -82-3dBm */ + 0x33, 0x15, 0xc5, /* -78dBm */ + 0x43, 0x15, 0xc5, /* -74dBm */ + 0x53, 0x15, 0xc5, /* -70dBm */ + 0x63, 0x15, 0xc5 /* -66dBm */ +}; + +static void rtl8225z2_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + int i; + + rtl8225_write(dev, 0x0, 0x2BF); + rtl8225_write(dev, 0x1, 0xEE0); + rtl8225_write(dev, 0x2, 0x44D); + rtl8225_write(dev, 0x3, 0x441); + rtl8225_write(dev, 0x4, 0x8C3); + rtl8225_write(dev, 0x5, 0xC72); + rtl8225_write(dev, 0x6, 0x0E6); + rtl8225_write(dev, 0x7, 0x82A); + rtl8225_write(dev, 0x8, 0x03F); + rtl8225_write(dev, 0x9, 0x335); + rtl8225_write(dev, 0xa, 0x9D4); + rtl8225_write(dev, 0xb, 0x7BB); + rtl8225_write(dev, 0xc, 0x850); + rtl8225_write(dev, 0xd, 0xCDF); + rtl8225_write(dev, 0xe, 0x02B); + rtl8225_write(dev, 0xf, 0x114); + msleep(100); + + rtl8225_write(dev, 0x0, 0x1B7); + + for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) { + rtl8225_write(dev, 0x1, i + 1); + rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]); + } + + rtl8225_write(dev, 0x3, 0x080); + rtl8225_write(dev, 0x5, 0x004); + rtl8225_write(dev, 0x0, 0x0B7); + rtl8225_write(dev, 0x2, 0xc4D); + + msleep(200); + rtl8225_write(dev, 0x2, 0x44D); + msleep(100); + + if (!(rtl8225_read(dev, 6) & (1 << 7))) { + rtl8225_write(dev, 0x02, 0x0C4D); + msleep(200); + rtl8225_write(dev, 0x02, 0x044D); + msleep(100); + if (!(rtl8225_read(dev, 6) & (1 << 7))) + wiphy_warn(dev->wiphy, "RF Calibration Failed! %x\n", + rtl8225_read(dev, 6)); + } + + msleep(200); + + rtl8225_write(dev, 0x0, 0x2BF); + + for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) { + rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]); + rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i); + } + + msleep(1); + + rtl8225_write_phy_ofdm(dev, 0x00, 0x01); + rtl8225_write_phy_ofdm(dev, 0x01, 0x02); + rtl8225_write_phy_ofdm(dev, 0x02, 0x42); + rtl8225_write_phy_ofdm(dev, 0x03, 0x00); + rtl8225_write_phy_ofdm(dev, 0x04, 0x00); + rtl8225_write_phy_ofdm(dev, 0x05, 0x00); + rtl8225_write_phy_ofdm(dev, 0x06, 0x40); + rtl8225_write_phy_ofdm(dev, 0x07, 0x00); + rtl8225_write_phy_ofdm(dev, 0x08, 0x40); + rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); + rtl8225_write_phy_ofdm(dev, 0x0a, 0x08); + rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); + rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); + rtl8225_write_phy_ofdm(dev, 0x0d, 0x43); + rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); + rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); + rtl8225_write_phy_ofdm(dev, 0x10, 0x84); + rtl8225_write_phy_ofdm(dev, 0x11, 0x07); + rtl8225_write_phy_ofdm(dev, 0x12, 0x20); + rtl8225_write_phy_ofdm(dev, 0x13, 0x20); + rtl8225_write_phy_ofdm(dev, 0x14, 0x00); + rtl8225_write_phy_ofdm(dev, 0x15, 0x40); + rtl8225_write_phy_ofdm(dev, 0x16, 0x00); + rtl8225_write_phy_ofdm(dev, 0x17, 0x40); + rtl8225_write_phy_ofdm(dev, 0x18, 0xef); + rtl8225_write_phy_ofdm(dev, 0x19, 0x19); + rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); + rtl8225_write_phy_ofdm(dev, 0x1b, 0x15); + rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); + rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); + rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); + rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); + rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); + rtl8225_write_phy_ofdm(dev, 0x21, 0x17); + rtl8225_write_phy_ofdm(dev, 0x22, 0x16); + rtl8225_write_phy_ofdm(dev, 0x23, 0x80); + rtl8225_write_phy_ofdm(dev, 0x24, 0x46); + rtl8225_write_phy_ofdm(dev, 0x25, 0x00); + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); + rtl8225_write_phy_ofdm(dev, 0x27, 0x88); + + rtl8225_write_phy_ofdm(dev, 0x0b, rtl8225z2_gain_bg[4 * 3]); + rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225z2_gain_bg[4 * 3 + 1]); + rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225z2_gain_bg[4 * 3 + 2]); + rtl8225_write_phy_ofdm(dev, 0x21, 0x37); + + rtl8225_write_phy_cck(dev, 0x00, 0x98); + rtl8225_write_phy_cck(dev, 0x03, 0x20); + rtl8225_write_phy_cck(dev, 0x04, 0x7e); + rtl8225_write_phy_cck(dev, 0x05, 0x12); + rtl8225_write_phy_cck(dev, 0x06, 0xfc); + rtl8225_write_phy_cck(dev, 0x07, 0x78); + rtl8225_write_phy_cck(dev, 0x08, 0x2e); + rtl8225_write_phy_cck(dev, 0x10, 0x9b); + rtl8225_write_phy_cck(dev, 0x11, 0x88); + rtl8225_write_phy_cck(dev, 0x12, 0x47); + rtl8225_write_phy_cck(dev, 0x13, 0xd0); + rtl8225_write_phy_cck(dev, 0x19, 0x00); + rtl8225_write_phy_cck(dev, 0x1a, 0xa0); + rtl8225_write_phy_cck(dev, 0x1b, 0x08); + rtl8225_write_phy_cck(dev, 0x40, 0x86); + rtl8225_write_phy_cck(dev, 0x41, 0x8d); + rtl8225_write_phy_cck(dev, 0x42, 0x15); + rtl8225_write_phy_cck(dev, 0x43, 0x18); + rtl8225_write_phy_cck(dev, 0x44, 0x36); + rtl8225_write_phy_cck(dev, 0x45, 0x35); + rtl8225_write_phy_cck(dev, 0x46, 0x2e); + rtl8225_write_phy_cck(dev, 0x47, 0x25); + rtl8225_write_phy_cck(dev, 0x48, 0x1c); + rtl8225_write_phy_cck(dev, 0x49, 0x12); + rtl8225_write_phy_cck(dev, 0x4a, 0x09); + rtl8225_write_phy_cck(dev, 0x4b, 0x04); + rtl8225_write_phy_cck(dev, 0x4c, 0x05); + + rtl818x_iowrite8(priv, (u8 *)0xFF5B, 0x0D); msleep(1); + + rtl8225z2_rf_set_tx_power(dev, 1); + + /* RX antenna default to A */ + rtl8225_write_phy_cck(dev, 0x10, 0x9b); /* B: 0xDB */ + rtl8225_write_phy_ofdm(dev, 0x26, 0x90); /* B: 0x10 */ + + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */ + msleep(1); + rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002); +} + +static void rtl8225z2_b_rf_init(struct ieee80211_hw *dev) +{ + struct rtl8187_priv *priv = dev->priv; + int i; + + rtl8225_write(dev, 0x0, 0x0B7); + rtl8225_write(dev, 0x1, 0xEE0); + rtl8225_write(dev, 0x2, 0x44D); + rtl8225_write(dev, 0x3, 0x441); + rtl8225_write(dev, 0x4, 0x8C3); + rtl8225_write(dev, 0x5, 0xC72); + rtl8225_write(dev, 0x6, 0x0E6); + rtl8225_write(dev, 0x7, 0x82A); + rtl8225_write(dev, 0x8, 0x03F); + rtl8225_write(dev, 0x9, 0x335); + rtl8225_write(dev, 0xa, 0x9D4); + rtl8225_write(dev, 0xb, 0x7BB); + rtl8225_write(dev, 0xc, 0x850); + rtl8225_write(dev, 0xd, 0xCDF); + rtl8225_write(dev, 0xe, 0x02B); + rtl8225_write(dev, 0xf, 0x114); + + rtl8225_write(dev, 0x0, 0x1B7); + + for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) { + rtl8225_write(dev, 0x1, i + 1); + rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]); + } + + rtl8225_write(dev, 0x3, 0x080); + rtl8225_write(dev, 0x5, 0x004); + rtl8225_write(dev, 0x0, 0x0B7); + + rtl8225_write(dev, 0x2, 0xC4D); + + rtl8225_write(dev, 0x2, 0x44D); + rtl8225_write(dev, 0x0, 0x2BF); + + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x03); + rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x07); + rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); + + rtl8225_write_phy_ofdm(dev, 0x80, 0x12); + for (i = 0; i < ARRAY_SIZE(rtl8225z2_agc); i++) { + rtl8225_write_phy_ofdm(dev, 0xF, rtl8225z2_agc[i]); + rtl8225_write_phy_ofdm(dev, 0xE, 0x80 + i); + rtl8225_write_phy_ofdm(dev, 0xE, 0); + } + rtl8225_write_phy_ofdm(dev, 0x80, 0x10); + + for (i = 0; i < ARRAY_SIZE(rtl8225z2_ofdm); i++) + rtl8225_write_phy_ofdm(dev, i, rtl8225z2_ofdm[i]); + + rtl8225_write_phy_ofdm(dev, 0x97, 0x46); + rtl8225_write_phy_ofdm(dev, 0xa4, 0xb6); + rtl8225_write_phy_ofdm(dev, 0x85, 0xfc); + rtl8225_write_phy_cck(dev, 0xc1, 0x88); +} + +static void rtl8225_rf_stop(struct ieee80211_hw *dev) +{ + rtl8225_write(dev, 0x4, 0x1f); +} + +static void rtl8225_rf_set_channel(struct ieee80211_hw *dev, + struct ieee80211_conf *conf) +{ + struct rtl8187_priv *priv = dev->priv; + int chan = + ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); + + if (priv->rf->init == rtl8225_rf_init) + rtl8225_rf_set_tx_power(dev, chan); + else if (priv->rf->init == rtl8225z2_rf_init) + rtl8225z2_rf_set_tx_power(dev, chan); + else + rtl8225z2_b_rf_set_tx_power(dev, chan); + + rtl8225_write(dev, 0x7, rtl8225_chan[chan - 1]); + msleep(10); +} + +static const struct rtl818x_rf_ops rtl8225_ops = { + .name = "rtl8225", + .init = rtl8225_rf_init, + .stop = rtl8225_rf_stop, + .set_chan = rtl8225_rf_set_channel +}; + +static const struct rtl818x_rf_ops rtl8225z2_ops = { + .name = "rtl8225z2", + .init = rtl8225z2_rf_init, + .stop = rtl8225_rf_stop, + .set_chan = rtl8225_rf_set_channel +}; + +static const struct rtl818x_rf_ops rtl8225z2_b_ops = { + .name = "rtl8225z2", + .init = rtl8225z2_b_rf_init, + .stop = rtl8225_rf_stop, + .set_chan = rtl8225_rf_set_channel +}; + +const struct rtl818x_rf_ops * rtl8187_detect_rf(struct ieee80211_hw *dev) +{ + u16 reg8, reg9; + struct rtl8187_priv *priv = dev->priv; + + if (!priv->is_rtl8187b) { + rtl8225_write(dev, 0, 0x1B7); + + reg8 = rtl8225_read(dev, 8); + reg9 = rtl8225_read(dev, 9); + + rtl8225_write(dev, 0, 0x0B7); + + if (reg8 != 0x588 || reg9 != 0x700) + return &rtl8225_ops; + + return &rtl8225z2_ops; + } else + return &rtl8225z2_b_ops; +} diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.h b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.h new file mode 100644 index 000000000..b9475e6ea --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Radio tuning definitions for RTL8225 on RTL8187 + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8187 driver, which is: + * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al. + */ + +#ifndef RTL8187_RTL8225_H +#define RTL8187_RTL8225_H + +#define RTL8187_RTL8225_ANAPARAM_ON 0xa0000a59 +#define RTL8187_RTL8225_ANAPARAM2_ON 0x860c7312 +#define RTL8187_RTL8225_ANAPARAM_OFF 0xa00beb59 +#define RTL8187_RTL8225_ANAPARAM2_OFF 0x840dec11 + +#define RTL8187B_RTL8225_ANAPARAM_ON 0x45090658 +#define RTL8187B_RTL8225_ANAPARAM2_ON 0x727f3f52 +#define RTL8187B_RTL8225_ANAPARAM3_ON 0x00 +#define RTL8187B_RTL8225_ANAPARAM_OFF 0x55480658 +#define RTL8187B_RTL8225_ANAPARAM2_OFF 0x72003f50 +#define RTL8187B_RTL8225_ANAPARAM3_OFF 0x00 + +const struct rtl818x_rf_ops * rtl8187_detect_rf(struct ieee80211_hw *); + +static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev, + u8 addr, u32 data) +{ + rtl8187_write_phy(dev, addr, data); +} + +static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev, + u8 addr, u32 data) +{ + rtl8187_write_phy(dev, addr, data | 0x10000); +} + +#endif /* RTL8187_RTL8225_H */ diff --git a/drivers/net/wireless/realtek/rtl818x/rtl818x.h b/drivers/net/wireless/realtek/rtl818x/rtl818x.h new file mode 100644 index 000000000..597f41af8 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl818x/rtl818x.h @@ -0,0 +1,402 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Definitions for RTL818x hardware + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> + * + * Based on the r8187 driver, which is: + * Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al. + */ + +#ifndef RTL818X_H +#define RTL818X_H + +struct rtl818x_csr { + + u8 MAC[6]; + u8 reserved_0[2]; + + union { + __le32 MAR[2]; /* 0x8 */ + + struct{ /* rtl8187se */ + u8 rf_sw_config; /* 0x8 */ + u8 reserved_01[3]; + __le32 TMGDA; /* 0xc */ + } __packed; + } __packed; + + union { /* 0x10 */ + struct { + u8 RX_FIFO_COUNT; + u8 reserved_1; + u8 TX_FIFO_COUNT; + u8 BQREQ; + } __packed; + + __le32 TBKDA; /* for 8187se */ + } __packed; + + __le32 TBEDA; /* 0x14 - for rtl8187se */ + + __le32 TSFT[2]; + + union { /* 0x20 */ + __le32 TLPDA; + __le32 TVIDA; /* for 8187se */ + } __packed; + + union { /* 0x24 */ + __le32 TNPDA; + __le32 TVODA; /* for 8187se */ + } __packed; + + /* hi pri ring for all cards */ + __le32 THPDA; /* 0x28 */ + + union { /* 0x2c */ + struct { + u8 reserved_2a; + u8 EIFS_8187SE; + } __packed; + + __le16 BRSR; + } __packed; + + u8 BSSID[6]; /* 0x2e */ + + union { /* 0x34 */ + struct { + u8 RESP_RATE; + u8 EIFS; + } __packed; + __le16 BRSR_8187SE; + } __packed; + + u8 reserved_3[1]; /* 0x36 */ + u8 CMD; /* 0x37 */ +#define RTL818X_CMD_TX_ENABLE (1 << 2) +#define RTL818X_CMD_RX_ENABLE (1 << 3) +#define RTL818X_CMD_RESET (1 << 4) + u8 reserved_4[4]; /* 0x38 */ + union { + struct { + __le16 INT_MASK; + __le16 INT_STATUS; + } __packed; + + __le32 INT_STATUS_SE; /* 0x3c */ + } __packed; +/* status bits for rtl8187 and rtl8180/8185 */ +#define RTL818X_INT_RX_OK (1 << 0) +#define RTL818X_INT_RX_ERR (1 << 1) +#define RTL818X_INT_TXL_OK (1 << 2) +#define RTL818X_INT_TXL_ERR (1 << 3) +#define RTL818X_INT_RX_DU (1 << 4) +#define RTL818X_INT_RX_FO (1 << 5) +#define RTL818X_INT_TXN_OK (1 << 6) +#define RTL818X_INT_TXN_ERR (1 << 7) +#define RTL818X_INT_TXH_OK (1 << 8) +#define RTL818X_INT_TXH_ERR (1 << 9) +#define RTL818X_INT_TXB_OK (1 << 10) +#define RTL818X_INT_TXB_ERR (1 << 11) +#define RTL818X_INT_ATIM (1 << 12) +#define RTL818X_INT_BEACON (1 << 13) +#define RTL818X_INT_TIME_OUT (1 << 14) +#define RTL818X_INT_TX_FO (1 << 15) +/* status bits for rtl8187se */ +#define RTL818X_INT_SE_TIMER3 (1 << 0) +#define RTL818X_INT_SE_TIMER2 (1 << 1) +#define RTL818X_INT_SE_RQ0SOR (1 << 2) +#define RTL818X_INT_SE_TXBED_OK (1 << 3) +#define RTL818X_INT_SE_TXBED_ERR (1 << 4) +#define RTL818X_INT_SE_TXBE_OK (1 << 5) +#define RTL818X_INT_SE_TXBE_ERR (1 << 6) +#define RTL818X_INT_SE_RX_OK (1 << 7) +#define RTL818X_INT_SE_RX_ERR (1 << 8) +#define RTL818X_INT_SE_TXL_OK (1 << 9) +#define RTL818X_INT_SE_TXL_ERR (1 << 10) +#define RTL818X_INT_SE_RX_DU (1 << 11) +#define RTL818X_INT_SE_RX_FIFO (1 << 12) +#define RTL818X_INT_SE_TXN_OK (1 << 13) +#define RTL818X_INT_SE_TXN_ERR (1 << 14) +#define RTL818X_INT_SE_TXH_OK (1 << 15) +#define RTL818X_INT_SE_TXH_ERR (1 << 16) +#define RTL818X_INT_SE_TXB_OK (1 << 17) +#define RTL818X_INT_SE_TXB_ERR (1 << 18) +#define RTL818X_INT_SE_ATIM_TO (1 << 19) +#define RTL818X_INT_SE_BK_TO (1 << 20) +#define RTL818X_INT_SE_TIMER1 (1 << 21) +#define RTL818X_INT_SE_TX_FIFO (1 << 22) +#define RTL818X_INT_SE_WAKEUP (1 << 23) +#define RTL818X_INT_SE_BK_DMA (1 << 24) +#define RTL818X_INT_SE_TMGD_OK (1 << 30) + __le32 TX_CONF; /* 0x40 */ +#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17) +#define RTL818X_TX_CONF_LOOPBACK_CONT (3 << 17) +#define RTL818X_TX_CONF_NO_ICV (1 << 19) +#define RTL818X_TX_CONF_DISCW (1 << 20) +#define RTL818X_TX_CONF_SAT_HWPLCP (1 << 24) +#define RTL818X_TX_CONF_R8180_ABCD (2 << 25) +#define RTL818X_TX_CONF_R8180_F (3 << 25) +#define RTL818X_TX_CONF_R8185_ABC (4 << 25) +#define RTL818X_TX_CONF_R8185_D (5 << 25) +#define RTL818X_TX_CONF_R8187vD (5 << 25) +#define RTL818X_TX_CONF_R8187vD_B (6 << 25) +#define RTL818X_TX_CONF_RTL8187SE (6 << 25) +#define RTL818X_TX_CONF_HWVER_MASK (7 << 25) +#define RTL818X_TX_CONF_DISREQQSIZE (1 << 28) +#define RTL818X_TX_CONF_PROBE_DTS (1 << 29) +#define RTL818X_TX_CONF_HW_SEQNUM (1 << 30) +#define RTL818X_TX_CONF_CW_MIN (1 << 31) + __le32 RX_CONF; +#define RTL818X_RX_CONF_MONITOR (1 << 0) +#define RTL818X_RX_CONF_NICMAC (1 << 1) +#define RTL818X_RX_CONF_MULTICAST (1 << 2) +#define RTL818X_RX_CONF_BROADCAST (1 << 3) +#define RTL818X_RX_CONF_FCS (1 << 5) +#define RTL818X_RX_CONF_DATA (1 << 18) +#define RTL818X_RX_CONF_CTRL (1 << 19) +#define RTL818X_RX_CONF_MGMT (1 << 20) +#define RTL818X_RX_CONF_ADDR3 (1 << 21) +#define RTL818X_RX_CONF_PM (1 << 22) +#define RTL818X_RX_CONF_BSSID (1 << 23) +#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28) +#define RTL818X_RX_CONF_CSDM1 (1 << 29) +#define RTL818X_RX_CONF_CSDM2 (1 << 30) +#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31) + __le32 INT_TIMEOUT; + __le32 TBDA; + u8 EEPROM_CMD; +#define RTL818X_EEPROM_CMD_READ (1 << 0) +#define RTL818X_EEPROM_CMD_WRITE (1 << 1) +#define RTL818X_EEPROM_CMD_CK (1 << 2) +#define RTL818X_EEPROM_CMD_CS (1 << 3) +#define RTL818X_EEPROM_CMD_NORMAL (0 << 6) +#define RTL818X_EEPROM_CMD_LOAD (1 << 6) +#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6) +#define RTL818X_EEPROM_CMD_CONFIG (3 << 6) + u8 CONFIG0; + u8 CONFIG1; + u8 CONFIG2; +#define RTL818X_CONFIG2_ANTENNA_DIV (1 << 6) + __le32 ANAPARAM; + u8 MSR; +#define RTL818X_MSR_NO_LINK (0 << 2) +#define RTL818X_MSR_ADHOC (1 << 2) +#define RTL818X_MSR_INFRA (2 << 2) +#define RTL818X_MSR_MASTER (3 << 2) +#define RTL818X_MSR_ENEDCA (4 << 2) + u8 CONFIG3; +#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6) +#define RTL818X_CONFIG3_GNT_SELECT (1 << 7) + u8 CONFIG4; +#define RTL818X_CONFIG4_POWEROFF (1 << 6) +#define RTL818X_CONFIG4_VCOOFF (1 << 7) + u8 TESTR; + u8 reserved_9[2]; + u8 PGSELECT; + u8 SECURITY; + __le32 ANAPARAM2; + u8 reserved_10[8]; + __le32 IMR; /* 0x6c - Interrupt mask reg for 8187se */ +#define IMR_TMGDOK ((1 << 30)) +#define IMR_DOT11HINT ((1 << 25)) /* 802.11h Measurement Interrupt */ +#define IMR_BCNDMAINT ((1 << 24)) /* Beacon DMA Interrupt */ +#define IMR_WAKEINT ((1 << 23)) /* Wake Up Interrupt */ +#define IMR_TXFOVW ((1 << 22)) /* Tx FIFO Overflow */ +#define IMR_TIMEOUT1 ((1 << 21)) /* Time Out Interrupt 1 */ +#define IMR_BCNINT ((1 << 20)) /* Beacon Time out */ +#define IMR_ATIMINT ((1 << 19)) /* ATIM Time Out */ +#define IMR_TBDER ((1 << 18)) /* Tx Beacon Descriptor Error */ +#define IMR_TBDOK ((1 << 17)) /* Tx Beacon Descriptor OK */ +#define IMR_THPDER ((1 << 16)) /* Tx High Priority Descriptor Error */ +#define IMR_THPDOK ((1 << 15)) /* Tx High Priority Descriptor OK */ +#define IMR_TVODER ((1 << 14)) /* Tx AC_VO Descriptor Error Int */ +#define IMR_TVODOK ((1 << 13)) /* Tx AC_VO Descriptor OK Interrupt */ +#define IMR_FOVW ((1 << 12)) /* Rx FIFO Overflow Interrupt */ +#define IMR_RDU ((1 << 11)) /* Rx Descriptor Unavailable */ +#define IMR_TVIDER ((1 << 10)) /* Tx AC_VI Descriptor Error */ +#define IMR_TVIDOK ((1 << 9)) /* Tx AC_VI Descriptor OK Interrupt */ +#define IMR_RER ((1 << 8)) /* Rx Error Interrupt */ +#define IMR_ROK ((1 << 7)) /* Receive OK Interrupt */ +#define IMR_TBEDER ((1 << 6)) /* Tx AC_BE Descriptor Error */ +#define IMR_TBEDOK ((1 << 5)) /* Tx AC_BE Descriptor OK */ +#define IMR_TBKDER ((1 << 4)) /* Tx AC_BK Descriptor Error */ +#define IMR_TBKDOK ((1 << 3)) /* Tx AC_BK Descriptor OK */ +#define IMR_RQOSOK ((1 << 2)) /* Rx QoS OK Interrupt */ +#define IMR_TIMEOUT2 ((1 << 1)) /* Time Out Interrupt 2 */ +#define IMR_TIMEOUT3 ((1 << 0)) /* Time Out Interrupt 3 */ + __le16 BEACON_INTERVAL; /* 0x70 */ + __le16 ATIM_WND; /* 0x72 */ + __le16 BEACON_INTERVAL_TIME; /* 0x74 */ + __le16 ATIMTR_INTERVAL; /* 0x76 */ + u8 PHY_DELAY; /* 0x78 */ + u8 CARRIER_SENSE_COUNTER; /* 0x79 */ + u8 reserved_11[2]; /* 0x7a */ + u8 PHY[4]; /* 0x7c */ + __le16 RFPinsOutput; /* 0x80 */ + __le16 RFPinsEnable; /* 0x82 */ + __le16 RFPinsSelect; /* 0x84 */ + __le16 RFPinsInput; /* 0x86 */ + __le32 RF_PARA; /* 0x88 */ + __le32 RF_TIMING; /* 0x8c */ + u8 GP_ENABLE; /* 0x90 */ + u8 GPIO0; /* 0x91 */ + u8 GPIO1; /* 0x92 */ + u8 TPPOLL_STOP; /* 0x93 - rtl8187se only */ +#define RTL818x_TPPOLL_STOP_BQ (1 << 7) +#define RTL818x_TPPOLL_STOP_VI (1 << 4) +#define RTL818x_TPPOLL_STOP_VO (1 << 5) +#define RTL818x_TPPOLL_STOP_BE (1 << 3) +#define RTL818x_TPPOLL_STOP_BK (1 << 2) +#define RTL818x_TPPOLL_STOP_MG (1 << 1) +#define RTL818x_TPPOLL_STOP_HI (1 << 6) + + __le32 HSSI_PARA; /* 0x94 */ + u8 reserved_13[4]; /* 0x98 */ + u8 TX_AGC_CTL; /* 0x9c */ +#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN (1 << 0) +#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL (1 << 1) +#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2) + u8 TX_GAIN_CCK; + u8 TX_GAIN_OFDM; + u8 TX_ANTENNA; + u8 reserved_14[16]; + u8 WPA_CONF; + u8 reserved_15[3]; + u8 SIFS; + u8 DIFS; + u8 SLOT; + u8 reserved_16[5]; + u8 CW_CONF; +#define RTL818X_CW_CONF_PERPACKET_CW (1 << 0) +#define RTL818X_CW_CONF_PERPACKET_RETRY (1 << 1) + u8 CW_VAL; + u8 RATE_FALLBACK; +#define RTL818X_RATE_FALLBACK_ENABLE (1 << 7) + u8 ACM_CONTROL; + u8 reserved_17[24]; + u8 CONFIG5; + u8 TX_DMA_POLLING; + u8 PHY_PR; + u8 reserved_18; + __le16 CWR; + u8 RETRY_CTR; + u8 reserved_19[3]; + __le16 INT_MIG; +/* RTL818X_R8187B_*: magic numbers from ioregisters */ +#define RTL818X_R8187B_B 0 +#define RTL818X_R8187B_D 1 +#define RTL818X_R8187B_E 2 + __le32 RDSAR; + __le16 TID_AC_MAP; + u8 reserved_20[4]; + union { + __le16 ANAPARAM3; /* 0xee */ + u8 ANAPARAM3A; /* for rtl8187 */ + }; + +#define AC_PARAM_TXOP_LIMIT_SHIFT 16 +#define AC_PARAM_ECW_MAX_SHIFT 12 +#define AC_PARAM_ECW_MIN_SHIFT 8 +#define AC_PARAM_AIFS_SHIFT 0 + + __le32 AC_VO_PARAM; /* 0xf0 */ + + union { /* 0xf4 */ + __le32 AC_VI_PARAM; + __le16 FEMR; + } __packed; + + union{ /* 0xf8 */ + __le32 AC_BE_PARAM; /* rtl8187se */ + struct{ + u8 reserved_21[2]; + __le16 TALLY_CNT; /* 0xfa */ + } __packed; + } __packed; + + union { + u8 TALLY_SEL; /* 0xfc */ + __le32 AC_BK_PARAM; + + } __packed; + +} __packed; + +/* These are addresses with NON-standard usage. + * They have offsets very far from this struct. + * I don't like to introduce a ton of "reserved".. + * They are for RTL8187SE + */ +#define REG_ADDR1(addr) ((u8 __iomem *)priv->map + (addr)) +#define REG_ADDR2(addr) ((__le16 __iomem *)priv->map + ((addr) >> 1)) +#define REG_ADDR4(addr) ((__le32 __iomem *)priv->map + ((addr) >> 2)) + +#define FEMR_SE REG_ADDR2(0x1D4) +#define ARFR REG_ADDR2(0x1E0) +#define RFSW_CTRL REG_ADDR2(0x272) +#define SW_3W_DB0 REG_ADDR2(0x274) +#define SW_3W_DB0_4 REG_ADDR4(0x274) +#define SW_3W_DB1 REG_ADDR2(0x278) +#define SW_3W_DB1_4 REG_ADDR4(0x278) +#define SW_3W_CMD1 REG_ADDR1(0x27D) +#define PI_DATA_REG REG_ADDR2(0x360) +#define SI_DATA_REG REG_ADDR2(0x362) + +struct rtl818x_rf_ops { + char *name; + void (*init)(struct ieee80211_hw *); + void (*stop)(struct ieee80211_hw *); + void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *); + u8 (*calc_rssi)(u8 agc, u8 sq); +}; + +/** + * enum rtl818x_tx_desc_flags - Tx/Rx flags are common between RTL818X chips + * + * @RTL818X_TX_DESC_FLAG_NO_ENC: Disable hardware based encryption. + * @RTL818X_TX_DESC_FLAG_TX_OK: TX frame was ACKed. + * @RTL818X_TX_DESC_FLAG_SPLCP: Use short preamble. + * @RTL818X_TX_DESC_FLAG_MOREFRAG: More fragments follow. + * @RTL818X_TX_DESC_FLAG_CTS: Use CTS-to-self protection. + * @RTL818X_TX_DESC_FLAG_RTS: Use RTS/CTS protection. + * @RTL818X_TX_DESC_FLAG_LS: Last segment of the frame. + * @RTL818X_TX_DESC_FLAG_FS: First segment of the frame. + */ +enum rtl818x_tx_desc_flags { + RTL818X_TX_DESC_FLAG_NO_ENC = (1 << 15), + RTL818X_TX_DESC_FLAG_TX_OK = (1 << 15), + RTL818X_TX_DESC_FLAG_SPLCP = (1 << 16), + RTL818X_TX_DESC_FLAG_RX_UNDER = (1 << 16), + RTL818X_TX_DESC_FLAG_MOREFRAG = (1 << 17), + RTL818X_TX_DESC_FLAG_CTS = (1 << 18), + RTL818X_TX_DESC_FLAG_RTS = (1 << 23), + RTL818X_TX_DESC_FLAG_LS = (1 << 28), + RTL818X_TX_DESC_FLAG_FS = (1 << 29), + RTL818X_TX_DESC_FLAG_DMA = (1 << 30), + RTL818X_TX_DESC_FLAG_OWN = (1 << 31) +}; + +enum rtl818x_rx_desc_flags { + RTL818X_RX_DESC_FLAG_ICV_ERR = (1 << 12), + RTL818X_RX_DESC_FLAG_CRC32_ERR = (1 << 13), + RTL818X_RX_DESC_FLAG_PM = (1 << 14), + RTL818X_RX_DESC_FLAG_RX_ERR = (1 << 15), + RTL818X_RX_DESC_FLAG_BCAST = (1 << 16), + RTL818X_RX_DESC_FLAG_PAM = (1 << 17), + RTL818X_RX_DESC_FLAG_MCAST = (1 << 18), + RTL818X_RX_DESC_FLAG_QOS = (1 << 19), /* RTL8187(B) only */ + RTL818X_RX_DESC_FLAG_TRSW = (1 << 24), /* RTL8187(B) only */ + RTL818X_RX_DESC_FLAG_SPLCP = (1 << 25), + RTL818X_RX_DESC_FLAG_FOF = (1 << 26), + RTL818X_RX_DESC_FLAG_DMA_FAIL = (1 << 27), + RTL818X_RX_DESC_FLAG_LS = (1 << 28), + RTL818X_RX_DESC_FLAG_FS = (1 << 29), + RTL818X_RX_DESC_FLAG_EOR = (1 << 30), + RTL818X_RX_DESC_FLAG_OWN = (1 << 31) +}; + +#endif /* RTL818X_H */ |