summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h')
-rw-r--r--drivers/net/wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h318
1 files changed, 318 insertions, 0 deletions
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h
new file mode 100644
index 000000000..2ae8347f7
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/pwrseq.h
@@ -0,0 +1,318 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2009-2014 Realtek Corporation.*/
+
+#ifndef __RTL92E_PWRSEQ_H__
+#define __RTL92E_PWRSEQ_H__
+
+#include "../pwrseqcmd.h"
+/**
+ * Check document WM-20110607-Paul-RTL8192E_Power_Architecture-R02.vsd
+ * There are 6 HW Power States:
+ * 0: POFF--Power Off
+ * 1: PDN--Power Down
+ * 2: CARDEMU--Card Emulation
+ * 3: ACT--Active Mode
+ * 4: LPS--Low Power State
+ * 5: SUS--Suspend
+ *
+ * The transision from different states are defined below
+ * TRANS_CARDEMU_TO_ACT
+ * TRANS_ACT_TO_CARDEMU
+ * TRANS_CARDEMU_TO_SUS
+ * TRANS_SUS_TO_CARDEMU
+ * TRANS_CARDEMU_TO_PDN
+ * TRANS_ACT_TO_LPS
+ * TRANS_LPS_TO_ACT
+ *
+ * TRANS_END
+ * PWR SEQ Version: rtl8192E_PwrSeq_V09.h
+ */
+
+#define RTL8192E_TRANS_CARDEMU_TO_ACT_STEPS 18
+#define RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS 18
+#define RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS 18
+#define RTL8192E_TRANS_SUS_TO_CARDEMU_STEPS 18
+#define RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS 18
+#define RTL8192E_TRANS_PDN_TO_CARDEMU_STEPS 18
+#define RTL8192E_TRANS_ACT_TO_LPS_STEPS 23
+#define RTL8192E_TRANS_LPS_TO_ACT_STEPS 23
+#define RTL8192E_TRANS_END_STEPS 1
+
+#define RTL8192E_TRANS_CARDEMU_TO_ACT \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /* disable HWPDN 0x04[15]=0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0}, \
+ /* disable SW LPS 0x04[10]=0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), 0}, \
+ /* disable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, (BIT(4)|BIT(3)), 0}, \
+ /* wait till 0x04[17] = 1 power ready*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ /* release WLON reset 0x04[16]=1*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ /* polling until return 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ /**/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(0), 0},
+
+#define RTL8192E_TRANS_ACT_TO_CARDEMU \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /*0x1F[7:0] = 0 turn off RF*/ \
+ {0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0}, \
+ /*0x4C[23]=0x4E[7]=0, switch DPDT_SEL_P output from register 0x65[2] */\
+ {0x004E, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0}, \
+ /*0x04[9] = 1 turn off MAC by HW state machine*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8192E_TRANS_CARDEMU_TO_SUS \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(4) | BIT(3), (BIT(4) | BIT(3))},\
+ /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK | PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
+ /*0x04[12:11] = 2b'11 enable WL suspend for PCIe*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) | BIT(4)},\
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ /*wait power state to suspend*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8192E_TRANS_SUS_TO_CARDEMU \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), 0}, \
+ /*wait power state to suspend*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ /*0x04[12:11] = 2b'00 disable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), 0},
+
+#define RTL8192E_TRANS_CARDEMU_TO_CARDDIS \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /*0x07=0x20 , SOP option to disable BG/MB*/ \
+ {0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x20}, \
+ /*Unlock small LDO Register*/ \
+ {0x00CC, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), BIT(2)}, \
+ /*Disable small LDO*/ \
+ {0x0011, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0}, \
+ /*0x04[12:11] = 2b'01 enable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
+ PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, \
+ PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
+ /*0x04[10] = 1, enable SW LPS*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), BIT(2)}, \
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ /*wait power state to suspend*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), 0},
+
+#define RTL8192E_TRANS_CARDDIS_TO_CARDEMU \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /*Set SDIO suspend local register*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO , PWR_CMD_WRITE, BIT(0), 0}, \
+ /*wait power state to suspend*/ \
+ {0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO , PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ /*Enable small LDO*/ \
+ {0x0011, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ /*Lock small LDO Register*/ \
+ {0x00CC, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(2), 0}, \
+ /*0x04[12:11] = 2b'00 disable WL suspend*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(3) | BIT(4), 0},
+
+#define RTL8192E_TRANS_CARDEMU_TO_PDN \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /* 0x04[16] = 0*/ \
+ {0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0}, \
+ /* 0x04[15] = 1*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), BIT(7)},
+
+#define RTL8192E_TRANS_PDN_TO_CARDEMU \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /* 0x04[15] = 0*/ \
+ {0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(7), 0},
+
+#define RTL8192E_TRANS_ACT_TO_LPS \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /*PCIe DMA stop*/ \
+ {0x0301, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ /*Tx Pause*/ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0}, \
+ /*Should be zero if no packet is transmitting*/ \
+ {0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_POLLING, 0xFF, 0}, \
+ /*CCK and OFDM are disabled,and clock are gated*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(0), 0}, \
+ /*Delay 1us*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US}, \
+ /*Whole BB is reset*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), 0}, \
+ /*Reset MAC TRX*/ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x03}, \
+ /*check if removed later*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), 0}, \
+ /*When driver enter Sus/ Disable, enable LOP for BT*/ \
+ {0x0093, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x00}, \
+ /*Respond TxOK to scheduler*/ \
+ {0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(5), BIT(5)},
+
+#define RTL8192E_TRANS_LPS_TO_ACT \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ /*SDIO RPWM, For Repeatly In and out, Taggle bit should be changed*/\
+ {0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
+ PWR_BASEADDR_SDIO , PWR_CMD_WRITE, 0xFF, 0x84}, \
+ /*USB RPWM*/ \
+ {0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x84}, \
+ /*PCIe RPWM*/ \
+ {0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0x84}, \
+ /*Delay*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, \
+ /*0x08[4] = 0 switch TSF to 40M*/ \
+ {0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(4), 0}, \
+ /*Polling 0x109[7]=0 TSF in 40M*/ \
+ {0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_POLLING, BIT(7), 0}, \
+ /*0x101[1] = 1*/ \
+ {0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ /*0x100[7:0] = 0xFF enable WMAC TRX*/ \
+ {0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ /* 0x02[1:0] = 2b'11 enable BB macro*/ \
+ {0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, BIT(1) | BIT(0), BIT(1) | BIT(0)},\
+ /*0x522 = 0*/ \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0}, \
+ /*Clear ISR*/ \
+ {0x013D, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC , PWR_CMD_WRITE, 0xFF, 0xFF},
+
+#define RTL8192E_TRANS_END \
+ /* format */ \
+ /* comments here */ \
+ /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+ {0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ 0, PWR_CMD_END, 0, 0},
+
+extern struct wlan_pwr_cfg rtl8192E_power_on_flow
+ [RTL8192E_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_radio_off_flow
+ [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_card_disable_flow
+ [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_card_enable_flow
+ [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_suspend_flow
+ [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_resume_flow
+ [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8192E_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_hwpdn_flow
+ [RTL8192E_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8192E_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_enter_lps_flow
+ [RTL8192E_TRANS_ACT_TO_LPS_STEPS +
+ RTL8192E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8192E_leave_lps_flow
+ [RTL8192E_TRANS_LPS_TO_ACT_STEPS +
+ RTL8192E_TRANS_END_STEPS];
+
+/* RTL8192EE Power Configuration CMDs for PCIe interface */
+#define RTL8192E_NIC_PWR_ON_FLOW rtl8192E_power_on_flow
+#define RTL8192E_NIC_RF_OFF_FLOW rtl8192E_radio_off_flow
+#define RTL8192E_NIC_DISABLE_FLOW rtl8192E_card_disable_flow
+#define RTL8192E_NIC_ENABLE_FLOW rtl8192E_card_enable_flow
+#define RTL8192E_NIC_SUSPEND_FLOW rtl8192E_suspend_flow
+#define RTL8192E_NIC_RESUME_FLOW rtl8192E_resume_flow
+#define RTL8192E_NIC_PDN_FLOW rtl8192E_hwpdn_flow
+#define RTL8192E_NIC_LPS_ENTER_FLOW rtl8192E_enter_lps_flow
+#define RTL8192E_NIC_LPS_LEAVE_FLOW rtl8192E_leave_lps_flow
+
+#endif