summaryrefslogtreecommitdiffstats
path: root/drivers/nvmem/imx-ocotp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/nvmem/imx-ocotp.c')
-rw-r--r--drivers/nvmem/imx-ocotp.c644
1 files changed, 644 insertions, 0 deletions
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
new file mode 100644
index 000000000..9590a864e
--- /dev/null
+++ b/drivers/nvmem/imx-ocotp.c
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * i.MX6 OCOTP fusebox driver
+ *
+ * Copyright (c) 2015 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * Copyright 2019 NXP
+ *
+ * Based on the barebox ocotp driver,
+ * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>,
+ * Orex Computed Radiography
+ *
+ * Write support based on the fsl_otp driver,
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#define IMX_OCOTP_OFFSET_B0W0 0x400 /* Offset from base address of the
+ * OTP Bank0 Word0
+ */
+#define IMX_OCOTP_OFFSET_PER_WORD 0x10 /* Offset between the start addr
+ * of two consecutive OTP words.
+ */
+
+#define IMX_OCOTP_ADDR_CTRL 0x0000
+#define IMX_OCOTP_ADDR_CTRL_SET 0x0004
+#define IMX_OCOTP_ADDR_CTRL_CLR 0x0008
+#define IMX_OCOTP_ADDR_TIMING 0x0010
+#define IMX_OCOTP_ADDR_DATA0 0x0020
+#define IMX_OCOTP_ADDR_DATA1 0x0030
+#define IMX_OCOTP_ADDR_DATA2 0x0040
+#define IMX_OCOTP_ADDR_DATA3 0x0050
+
+#define IMX_OCOTP_BM_CTRL_ADDR 0x000000FF
+#define IMX_OCOTP_BM_CTRL_BUSY 0x00000100
+#define IMX_OCOTP_BM_CTRL_ERROR 0x00000200
+#define IMX_OCOTP_BM_CTRL_REL_SHADOWS 0x00000400
+
+#define IMX_OCOTP_BM_CTRL_ADDR_8MP 0x000001FF
+#define IMX_OCOTP_BM_CTRL_BUSY_8MP 0x00000200
+#define IMX_OCOTP_BM_CTRL_ERROR_8MP 0x00000400
+#define IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP 0x00000800
+
+#define IMX_OCOTP_BM_CTRL_DEFAULT \
+ { \
+ .bm_addr = IMX_OCOTP_BM_CTRL_ADDR, \
+ .bm_busy = IMX_OCOTP_BM_CTRL_BUSY, \
+ .bm_error = IMX_OCOTP_BM_CTRL_ERROR, \
+ .bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS,\
+ }
+
+#define IMX_OCOTP_BM_CTRL_8MP \
+ { \
+ .bm_addr = IMX_OCOTP_BM_CTRL_ADDR_8MP, \
+ .bm_busy = IMX_OCOTP_BM_CTRL_BUSY_8MP, \
+ .bm_error = IMX_OCOTP_BM_CTRL_ERROR_8MP, \
+ .bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP,\
+ }
+
+#define TIMING_STROBE_PROG_US 10 /* Min time to blow a fuse */
+#define TIMING_STROBE_READ_NS 37 /* Min time before read */
+#define TIMING_RELAX_NS 17
+#define DEF_FSOURCE 1001 /* > 1000 ns */
+#define DEF_STROBE_PROG 10000 /* IPG clocks */
+#define IMX_OCOTP_WR_UNLOCK 0x3E770000
+#define IMX_OCOTP_READ_LOCKED_VAL 0xBADABADA
+
+static DEFINE_MUTEX(ocotp_mutex);
+
+struct ocotp_priv {
+ struct device *dev;
+ struct clk *clk;
+ void __iomem *base;
+ const struct ocotp_params *params;
+ struct nvmem_config *config;
+};
+
+struct ocotp_ctrl_reg {
+ u32 bm_addr;
+ u32 bm_busy;
+ u32 bm_error;
+ u32 bm_rel_shadows;
+};
+
+struct ocotp_params {
+ unsigned int nregs;
+ unsigned int bank_address_words;
+ void (*set_timing)(struct ocotp_priv *priv);
+ struct ocotp_ctrl_reg ctrl;
+ bool reverse_mac_address;
+};
+
+static int imx_ocotp_wait_for_busy(struct ocotp_priv *priv, u32 flags)
+{
+ int count;
+ u32 c, mask;
+ u32 bm_ctrl_busy, bm_ctrl_error;
+ void __iomem *base = priv->base;
+
+ bm_ctrl_busy = priv->params->ctrl.bm_busy;
+ bm_ctrl_error = priv->params->ctrl.bm_error;
+
+ mask = bm_ctrl_busy | bm_ctrl_error | flags;
+
+ for (count = 10000; count >= 0; count--) {
+ c = readl(base + IMX_OCOTP_ADDR_CTRL);
+ if (!(c & mask))
+ break;
+ cpu_relax();
+ }
+
+ if (count < 0) {
+ /* HW_OCOTP_CTRL[ERROR] will be set under the following
+ * conditions:
+ * - A write is performed to a shadow register during a shadow
+ * reload (essentially, while HW_OCOTP_CTRL[RELOAD_SHADOWS] is
+ * set. In addition, the contents of the shadow register shall
+ * not be updated.
+ * - A write is performed to a shadow register which has been
+ * locked.
+ * - A read is performed to from a shadow register which has
+ * been read locked.
+ * - A program is performed to a fuse word which has been locked
+ * - A read is performed to from a fuse word which has been read
+ * locked.
+ */
+ if (c & bm_ctrl_error)
+ return -EPERM;
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void imx_ocotp_clr_err_if_set(struct ocotp_priv *priv)
+{
+ u32 c, bm_ctrl_error;
+ void __iomem *base = priv->base;
+
+ bm_ctrl_error = priv->params->ctrl.bm_error;
+
+ c = readl(base + IMX_OCOTP_ADDR_CTRL);
+ if (!(c & bm_ctrl_error))
+ return;
+
+ writel(bm_ctrl_error, base + IMX_OCOTP_ADDR_CTRL_CLR);
+}
+
+static int imx_ocotp_read(void *context, unsigned int offset,
+ void *val, size_t bytes)
+{
+ struct ocotp_priv *priv = context;
+ unsigned int count;
+ u8 *buf, *p;
+ int i, ret;
+ u32 index, num_bytes;
+
+ index = offset >> 2;
+ num_bytes = round_up((offset % 4) + bytes, 4);
+ count = num_bytes >> 2;
+
+ if (count > (priv->params->nregs - index))
+ count = priv->params->nregs - index;
+
+ p = kzalloc(num_bytes, GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+
+ mutex_lock(&ocotp_mutex);
+
+ buf = p;
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret < 0) {
+ mutex_unlock(&ocotp_mutex);
+ dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
+ kfree(p);
+ return ret;
+ }
+
+ ret = imx_ocotp_wait_for_busy(priv, 0);
+ if (ret < 0) {
+ dev_err(priv->dev, "timeout during read setup\n");
+ goto read_end;
+ }
+
+ for (i = index; i < (index + count); i++) {
+ *(u32 *)buf = readl(priv->base + IMX_OCOTP_OFFSET_B0W0 +
+ i * IMX_OCOTP_OFFSET_PER_WORD);
+
+ /* 47.3.1.2
+ * For "read locked" registers 0xBADABADA will be returned and
+ * HW_OCOTP_CTRL[ERROR] will be set. It must be cleared by
+ * software before any new write, read or reload access can be
+ * issued
+ */
+ if (*((u32 *)buf) == IMX_OCOTP_READ_LOCKED_VAL)
+ imx_ocotp_clr_err_if_set(priv);
+
+ buf += 4;
+ }
+
+ index = offset % 4;
+ memcpy(val, &p[index], bytes);
+
+read_end:
+ clk_disable_unprepare(priv->clk);
+ mutex_unlock(&ocotp_mutex);
+
+ kfree(p);
+
+ return ret;
+}
+
+static int imx_ocotp_cell_pp(void *context, const char *id, unsigned int offset,
+ void *data, size_t bytes)
+{
+ struct ocotp_priv *priv = context;
+
+ /* Deal with some post processing of nvmem cell data */
+ if (id && !strcmp(id, "mac-address")) {
+ if (priv->params->reverse_mac_address) {
+ u8 *buf = data;
+ int i;
+
+ for (i = 0; i < bytes/2; i++)
+ swap(buf[i], buf[bytes - i - 1]);
+ }
+ }
+
+ return 0;
+}
+
+static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
+{
+ unsigned long clk_rate;
+ unsigned long strobe_read, relax, strobe_prog;
+ u32 timing;
+
+ /* 47.3.1.3.1
+ * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
+ * fields with timing values to match the current frequency of the
+ * ipg_clk. OTP writes will work at maximum bus frequencies as long
+ * as the HW_OCOTP_TIMING parameters are set correctly.
+ *
+ * Note: there are minimum timings required to ensure an OTP fuse burns
+ * correctly that are independent of the ipg_clk. Those values are not
+ * formally documented anywhere however, working from the minimum
+ * timings given in u-boot we can say:
+ *
+ * - Minimum STROBE_PROG time is 10 microseconds. Intuitively 10
+ * microseconds feels about right as representative of a minimum time
+ * to physically burn out a fuse.
+ *
+ * - Minimum STROBE_READ i.e. the time to wait post OTP fuse burn before
+ * performing another read is 37 nanoseconds
+ *
+ * - Minimum RELAX timing is 17 nanoseconds. This final RELAX minimum
+ * timing is not entirely clear the documentation says "This
+ * count value specifies the time to add to all default timing
+ * parameters other than the Tpgm and Trd. It is given in number
+ * of ipg_clk periods." where Tpgm and Trd refer to STROBE_PROG
+ * and STROBE_READ respectively. What the other timing parameters
+ * are though, is not specified. Experience shows a zero RELAX
+ * value will mess up a re-load of the shadow registers post OTP
+ * burn.
+ */
+ clk_rate = clk_get_rate(priv->clk);
+
+ relax = DIV_ROUND_UP(clk_rate * TIMING_RELAX_NS, 1000000000) - 1;
+ strobe_read = DIV_ROUND_UP(clk_rate * TIMING_STROBE_READ_NS,
+ 1000000000);
+ strobe_read += 2 * (relax + 1) - 1;
+ strobe_prog = DIV_ROUND_CLOSEST(clk_rate * TIMING_STROBE_PROG_US,
+ 1000000);
+ strobe_prog += 2 * (relax + 1) - 1;
+
+ timing = readl(priv->base + IMX_OCOTP_ADDR_TIMING) & 0x0FC00000;
+ timing |= strobe_prog & 0x00000FFF;
+ timing |= (relax << 12) & 0x0000F000;
+ timing |= (strobe_read << 16) & 0x003F0000;
+
+ writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static void imx_ocotp_set_imx7_timing(struct ocotp_priv *priv)
+{
+ unsigned long clk_rate;
+ u64 fsource, strobe_prog;
+ u32 timing;
+
+ /* i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1
+ * 6.4.3.3
+ */
+ clk_rate = clk_get_rate(priv->clk);
+ fsource = DIV_ROUND_UP_ULL((u64)clk_rate * DEF_FSOURCE,
+ NSEC_PER_SEC) + 1;
+ strobe_prog = DIV_ROUND_CLOSEST_ULL((u64)clk_rate * DEF_STROBE_PROG,
+ NSEC_PER_SEC) + 1;
+
+ timing = strobe_prog & 0x00000FFF;
+ timing |= (fsource << 12) & 0x000FF000;
+
+ writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static int imx_ocotp_write(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct ocotp_priv *priv = context;
+ u32 *buf = val;
+ int ret;
+
+ u32 ctrl;
+ u8 waddr;
+ u8 word = 0;
+
+ /* allow only writing one complete OTP word at a time */
+ if ((bytes != priv->config->word_size) ||
+ (offset % priv->config->word_size))
+ return -EINVAL;
+
+ mutex_lock(&ocotp_mutex);
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret < 0) {
+ mutex_unlock(&ocotp_mutex);
+ dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
+ return ret;
+ }
+
+ /* Setup the write timing values */
+ priv->params->set_timing(priv);
+
+ /* 47.3.1.3.2
+ * Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear.
+ * Overlapped accesses are not supported by the controller. Any pending
+ * write or reload must be completed before a write access can be
+ * requested.
+ */
+ ret = imx_ocotp_wait_for_busy(priv, 0);
+ if (ret < 0) {
+ dev_err(priv->dev, "timeout during timing setup\n");
+ goto write_end;
+ }
+
+ /* 47.3.1.3.3
+ * Write the requested address to HW_OCOTP_CTRL[ADDR] and program the
+ * unlock code into HW_OCOTP_CTRL[WR_UNLOCK]. This must be programmed
+ * for each write access. The lock code is documented in the register
+ * description. Both the unlock code and address can be written in the
+ * same operation.
+ */
+ if (priv->params->bank_address_words != 0) {
+ /*
+ * In banked/i.MX7 mode the OTP register bank goes into waddr
+ * see i.MX 7Solo Applications Processor Reference Manual, Rev.
+ * 0.1 section 6.4.3.1
+ */
+ offset = offset / priv->config->word_size;
+ waddr = offset / priv->params->bank_address_words;
+ word = offset & (priv->params->bank_address_words - 1);
+ } else {
+ /*
+ * Non-banked i.MX6 mode.
+ * OTP write/read address specifies one of 128 word address
+ * locations
+ */
+ waddr = offset / 4;
+ }
+
+ ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL);
+ ctrl &= ~priv->params->ctrl.bm_addr;
+ ctrl |= waddr & priv->params->ctrl.bm_addr;
+ ctrl |= IMX_OCOTP_WR_UNLOCK;
+
+ writel(ctrl, priv->base + IMX_OCOTP_ADDR_CTRL);
+
+ /* 47.3.1.3.4
+ * Write the data to the HW_OCOTP_DATA register. This will automatically
+ * set HW_OCOTP_CTRL[BUSY] and clear HW_OCOTP_CTRL[WR_UNLOCK]. To
+ * protect programming same OTP bit twice, before program OCOTP will
+ * automatically read fuse value in OTP and use read value to mask
+ * program data. The controller will use masked program data to program
+ * a 32-bit word in the OTP per the address in HW_OCOTP_CTRL[ADDR]. Bit
+ * fields with 1's will result in that OTP bit being programmed. Bit
+ * fields with 0's will be ignored. At the same time that the write is
+ * accepted, the controller makes an internal copy of
+ * HW_OCOTP_CTRL[ADDR] which cannot be updated until the next write
+ * sequence is initiated. This copy guarantees that erroneous writes to
+ * HW_OCOTP_CTRL[ADDR] will not affect an active write operation. It
+ * should also be noted that during the programming HW_OCOTP_DATA will
+ * shift right (with zero fill). This shifting is required to program
+ * the OTP serially. During the write operation, HW_OCOTP_DATA cannot be
+ * modified.
+ * Note: on i.MX7 there are four data fields to write for banked write
+ * with the fuse blowing operation only taking place after data0
+ * has been written. This is why data0 must always be the last
+ * register written.
+ */
+ if (priv->params->bank_address_words != 0) {
+ /* Banked/i.MX7 mode */
+ switch (word) {
+ case 0:
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ case 1:
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ case 2:
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ case 3:
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA3);
+ writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+ break;
+ }
+ } else {
+ /* Non-banked i.MX6 mode */
+ writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+ }
+
+ /* 47.4.1.4.5
+ * Once complete, the controller will clear BUSY. A write request to a
+ * protected or locked region will result in no OTP access and no
+ * setting of HW_OCOTP_CTRL[BUSY]. In addition HW_OCOTP_CTRL[ERROR] will
+ * be set. It must be cleared by software before any new write access
+ * can be issued.
+ */
+ ret = imx_ocotp_wait_for_busy(priv, 0);
+ if (ret < 0) {
+ if (ret == -EPERM) {
+ dev_err(priv->dev, "failed write to locked region");
+ imx_ocotp_clr_err_if_set(priv);
+ } else {
+ dev_err(priv->dev, "timeout during data write\n");
+ }
+ goto write_end;
+ }
+
+ /* 47.3.1.4
+ * Write Postamble: Due to internal electrical characteristics of the
+ * OTP during writes, all OTP operations following a write must be
+ * separated by 2 us after the clearing of HW_OCOTP_CTRL_BUSY following
+ * the write.
+ */
+ udelay(2);
+
+ /* reload all shadow registers */
+ writel(priv->params->ctrl.bm_rel_shadows,
+ priv->base + IMX_OCOTP_ADDR_CTRL_SET);
+ ret = imx_ocotp_wait_for_busy(priv,
+ priv->params->ctrl.bm_rel_shadows);
+ if (ret < 0)
+ dev_err(priv->dev, "timeout during shadow register reload\n");
+
+write_end:
+ clk_disable_unprepare(priv->clk);
+ mutex_unlock(&ocotp_mutex);
+ return ret < 0 ? ret : bytes;
+}
+
+static struct nvmem_config imx_ocotp_nvmem_config = {
+ .name = "imx-ocotp",
+ .read_only = false,
+ .word_size = 4,
+ .stride = 1,
+ .reg_read = imx_ocotp_read,
+ .reg_write = imx_ocotp_write,
+ .cell_post_process = imx_ocotp_cell_pp,
+};
+
+static const struct ocotp_params imx6q_params = {
+ .nregs = 128,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6sl_params = {
+ .nregs = 64,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6sll_params = {
+ .nregs = 80,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6sx_params = {
+ .nregs = 128,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6ul_params = {
+ .nregs = 144,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6ull_params = {
+ .nregs = 80,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx7d_params = {
+ .nregs = 64,
+ .bank_address_words = 4,
+ .set_timing = imx_ocotp_set_imx7_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx7ulp_params = {
+ .nregs = 256,
+ .bank_address_words = 0,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx8mq_params = {
+ .nregs = 256,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+ .reverse_mac_address = true,
+};
+
+static const struct ocotp_params imx8mm_params = {
+ .nregs = 256,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+ .reverse_mac_address = true,
+};
+
+static const struct ocotp_params imx8mn_params = {
+ .nregs = 256,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+ .reverse_mac_address = true,
+};
+
+static const struct ocotp_params imx8mp_params = {
+ .nregs = 384,
+ .bank_address_words = 0,
+ .set_timing = imx_ocotp_set_imx6_timing,
+ .ctrl = IMX_OCOTP_BM_CTRL_8MP,
+ .reverse_mac_address = true,
+};
+
+static const struct of_device_id imx_ocotp_dt_ids[] = {
+ { .compatible = "fsl,imx6q-ocotp", .data = &imx6q_params },
+ { .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
+ { .compatible = "fsl,imx6sx-ocotp", .data = &imx6sx_params },
+ { .compatible = "fsl,imx6ul-ocotp", .data = &imx6ul_params },
+ { .compatible = "fsl,imx6ull-ocotp", .data = &imx6ull_params },
+ { .compatible = "fsl,imx7d-ocotp", .data = &imx7d_params },
+ { .compatible = "fsl,imx6sll-ocotp", .data = &imx6sll_params },
+ { .compatible = "fsl,imx7ulp-ocotp", .data = &imx7ulp_params },
+ { .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params },
+ { .compatible = "fsl,imx8mm-ocotp", .data = &imx8mm_params },
+ { .compatible = "fsl,imx8mn-ocotp", .data = &imx8mn_params },
+ { .compatible = "fsl,imx8mp-ocotp", .data = &imx8mp_params },
+ { },
+};
+MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
+
+static int imx_ocotp_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ocotp_priv *priv;
+ struct nvmem_device *nvmem;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ priv->params = of_device_get_match_data(&pdev->dev);
+ imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
+ imx_ocotp_nvmem_config.dev = dev;
+ imx_ocotp_nvmem_config.priv = priv;
+ priv->config = &imx_ocotp_nvmem_config;
+
+ clk_prepare_enable(priv->clk);
+ imx_ocotp_clr_err_if_set(priv);
+ clk_disable_unprepare(priv->clk);
+
+ nvmem = devm_nvmem_register(dev, &imx_ocotp_nvmem_config);
+
+ return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver imx_ocotp_driver = {
+ .probe = imx_ocotp_probe,
+ .driver = {
+ .name = "imx_ocotp",
+ .of_match_table = imx_ocotp_dt_ids,
+ },
+};
+module_platform_driver(imx_ocotp_driver);
+
+MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
+MODULE_DESCRIPTION("i.MX6/i.MX7 OCOTP fuse box driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 23:12:34 +0000