diff options
Diffstat (limited to 'drivers/pci/controller/Kconfig')
-rw-r--r-- | drivers/pci/controller/Kconfig | 349 |
1 files changed, 349 insertions, 0 deletions
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig new file mode 100644 index 000000000..bfd9bac37 --- /dev/null +++ b/drivers/pci/controller/Kconfig @@ -0,0 +1,349 @@ +# SPDX-License-Identifier: GPL-2.0 + +menu "PCI controller drivers" + depends on PCI + +config PCI_MVEBU + tristate "Marvell EBU PCIe controller" + depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST + depends on MVEBU_MBUS + depends on ARM + depends on OF + select PCI_BRIDGE_EMUL + help + Add support for Marvell EBU PCIe controller. This PCIe controller + is used on 32-bit Marvell ARM SoCs: Dove, Kirkwood, Armada 370, + Armada XP, Armada 375, Armada 38x and Armada 39x. + +config PCI_AARDVARK + tristate "Aardvark PCIe controller" + depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST + depends on OF + depends on PCI_MSI_IRQ_DOMAIN + select PCI_BRIDGE_EMUL + help + Add support for Aardvark 64bit PCIe Host Controller. This + controller is part of the South Bridge of the Marvel Armada + 3700 SoC. + +config PCIE_XILINX_NWL + bool "NWL PCIe Core" + depends on ARCH_ZYNQMP || COMPILE_TEST + depends on PCI_MSI_IRQ_DOMAIN + help + Say 'Y' here if you want kernel support for Xilinx + NWL PCIe controller. The controller can act as Root Port + or End Point. The current option selection will only + support root port enabling. + +config PCI_FTPCI100 + bool "Faraday Technology FTPCI100 PCI controller" + depends on OF + default ARCH_GEMINI + +config PCI_IXP4XX + bool "Intel IXP4xx PCI controller" + depends on ARM && OF + depends on ARCH_IXP4XX || COMPILE_TEST + default ARCH_IXP4XX + help + Say Y here if you want support for the PCI host controller found + in the Intel IXP4xx XScale-based network processor SoC. + +config PCI_TEGRA + bool "NVIDIA Tegra PCIe controller" + depends on ARCH_TEGRA || COMPILE_TEST + depends on PCI_MSI_IRQ_DOMAIN + help + Say Y here if you want support for the PCIe host controller found + on NVIDIA Tegra SoCs. + +config PCI_RCAR_GEN2 + bool "Renesas R-Car Gen2 Internal PCI controller" + depends on ARCH_RENESAS || COMPILE_TEST + depends on ARM + help + Say Y here if you want internal PCI support on R-Car Gen2 SoC. + There are 3 internal PCI controllers available with a single + built-in EHCI/OHCI host controller present on each one. + +config PCIE_RCAR_HOST + bool "Renesas R-Car PCIe host controller" + depends on ARCH_RENESAS || COMPILE_TEST + depends on PCI_MSI_IRQ_DOMAIN + help + Say Y here if you want PCIe controller support on R-Car SoCs in host + mode. + +config PCIE_RCAR_EP + bool "Renesas R-Car PCIe endpoint controller" + depends on ARCH_RENESAS || COMPILE_TEST + depends on PCI_ENDPOINT + help + Say Y here if you want PCIe controller support on R-Car SoCs in + endpoint mode. + +config PCI_HOST_COMMON + tristate + select PCI_ECAM + +config PCI_HOST_GENERIC + tristate "Generic PCI host controller" + depends on OF + select PCI_HOST_COMMON + select IRQ_DOMAIN + help + Say Y here if you want to support a simple generic PCI host + controller, such as the one emulated by kvmtool. + +config PCIE_XILINX + bool "Xilinx AXI PCIe host bridge support" + depends on OF || COMPILE_TEST + depends on PCI_MSI_IRQ_DOMAIN + help + Say 'Y' here if you want kernel to support the Xilinx AXI PCIe + Host Bridge driver. + +config PCIE_XILINX_CPM + bool "Xilinx Versal CPM host bridge support" + depends on ARCH_ZYNQMP || COMPILE_TEST + select PCI_HOST_COMMON + help + Say 'Y' here if you want kernel support for the + Xilinx Versal CPM host bridge. + +config PCI_XGENE + bool "X-Gene PCIe controller" + depends on ARM64 || COMPILE_TEST + depends on OF || (ACPI && PCI_QUIRKS) + help + Say Y here if you want internal PCI support on APM X-Gene SoC. + There are 5 internal PCIe ports available. Each port is GEN3 capable + and have varied lanes from x1 to x8. + +config PCI_XGENE_MSI + bool "X-Gene v1 PCIe MSI feature" + depends on PCI_XGENE + depends on PCI_MSI_IRQ_DOMAIN + default y + help + Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC. + This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC. + +config PCI_V3_SEMI + bool "V3 Semiconductor PCI controller" + depends on OF + depends on ARM || COMPILE_TEST + default ARCH_INTEGRATOR_AP + +config PCI_VERSATILE + bool "ARM Versatile PB PCI controller" + depends on ARCH_VERSATILE || COMPILE_TEST + +config PCIE_IPROC + tristate + help + This enables the iProc PCIe core controller support for Broadcom's + iProc family of SoCs. An appropriate bus interface driver needs + to be enabled to select this. + +config PCIE_IPROC_PLATFORM + tristate "Broadcom iProc PCIe platform bus driver" + depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST) + depends on OF + select PCIE_IPROC + default ARCH_BCM_IPROC + help + Say Y here if you want to use the Broadcom iProc PCIe controller + through the generic platform bus interface + +config PCIE_IPROC_BCMA + tristate "Broadcom iProc PCIe BCMA bus driver" + depends on ARM && (ARCH_BCM_IPROC || COMPILE_TEST) + select PCIE_IPROC + select BCMA + default ARCH_BCM_5301X + help + Say Y here if you want to use the Broadcom iProc PCIe controller + through the BCMA bus interface + +config PCIE_IPROC_MSI + bool "Broadcom iProc PCIe MSI support" + depends on PCIE_IPROC_PLATFORM || PCIE_IPROC_BCMA + depends on PCI_MSI_IRQ_DOMAIN + default ARCH_BCM_IPROC + help + Say Y here if you want to enable MSI support for Broadcom's iProc + PCIe controller + +config PCIE_ALTERA + tristate "Altera PCIe controller" + depends on ARM || NIOS2 || ARM64 || COMPILE_TEST + help + Say Y here if you want to enable PCIe controller support on Altera + FPGA. + +config PCIE_ALTERA_MSI + tristate "Altera PCIe MSI feature" + depends on PCIE_ALTERA + depends on PCI_MSI_IRQ_DOMAIN + help + Say Y here if you want PCIe MSI support for the Altera FPGA. + This MSI driver supports Altera MSI to GIC controller IP. + +config PCI_HOST_THUNDER_PEM + bool "Cavium Thunder PCIe controller to off-chip devices" + depends on ARM64 || COMPILE_TEST + depends on OF || (ACPI && PCI_QUIRKS) + select PCI_HOST_COMMON + help + Say Y here if you want PCIe support for CN88XX Cavium Thunder SoCs. + +config PCI_HOST_THUNDER_ECAM + bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon" + depends on ARM64 || COMPILE_TEST + depends on OF || (ACPI && PCI_QUIRKS) + select PCI_HOST_COMMON + help + Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs. + +config PCIE_ROCKCHIP + bool + depends on PCI + +config PCIE_ROCKCHIP_HOST + tristate "Rockchip PCIe host controller" + depends on ARCH_ROCKCHIP || COMPILE_TEST + depends on OF + depends on PCI_MSI_IRQ_DOMAIN + select MFD_SYSCON + select PCIE_ROCKCHIP + help + Say Y here if you want internal PCI support on Rockchip SoC. + There is 1 internal PCIe port available to support GEN2 with + 4 slots. + +config PCIE_ROCKCHIP_EP + bool "Rockchip PCIe endpoint controller" + depends on ARCH_ROCKCHIP || COMPILE_TEST + depends on OF + depends on PCI_ENDPOINT + select MFD_SYSCON + select PCIE_ROCKCHIP + help + Say Y here if you want to support Rockchip PCIe controller in + endpoint mode on Rockchip SoC. There is 1 internal PCIe port + available to support GEN2 with 4 slots. + +config PCIE_MEDIATEK + tristate "MediaTek PCIe controller" + depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST + depends on OF + depends on PCI_MSI_IRQ_DOMAIN + help + Say Y here if you want to enable PCIe controller support on + MediaTek SoCs. + +config PCIE_MEDIATEK_GEN3 + tristate "MediaTek Gen3 PCIe controller" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on PCI_MSI_IRQ_DOMAIN + help + Adds support for PCIe Gen3 MAC controller for MediaTek SoCs. + This PCIe controller is compatible with Gen3, Gen2 and Gen1 speed, + and support up to 256 MSI interrupt numbers for + multi-function devices. + + Say Y here if you want to enable Gen3 PCIe controller support on + MediaTek SoCs. + +config VMD + depends on PCI_MSI && X86_64 && SRCU && !UML + tristate "Intel Volume Management Device Driver" + help + Adds support for the Intel Volume Management Device (VMD). VMD is a + secondary PCI host bridge that allows PCI Express root ports, + and devices attached to them, to be removed from the default + PCI domain and placed within the VMD domain. This provides + more bus resources than are otherwise possible with a + single domain. If you know your system provides one of these and + has devices attached to it, say Y; if you are not sure, say N. + + To compile this driver as a module, choose M here: the + module will be called vmd. + +config PCIE_BRCMSTB + tristate "Broadcom Brcmstb PCIe host controller" + depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \ + BMIPS_GENERIC || COMPILE_TEST + depends on OF + depends on PCI_MSI_IRQ_DOMAIN + default ARCH_BRCMSTB || BMIPS_GENERIC + help + Say Y here to enable PCIe host controller support for + Broadcom STB based SoCs, like the Raspberry Pi 4. + +config PCI_HYPERV_INTERFACE + tristate "Hyper-V PCI Interface" + depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN + help + The Hyper-V PCI Interface is a helper driver allows other drivers to + have a common interface with the Hyper-V PCI frontend driver. + +config PCI_LOONGSON + bool "LOONGSON PCI Controller" + depends on MACH_LOONGSON64 || COMPILE_TEST + depends on OF || ACPI + depends on PCI_QUIRKS + default MACH_LOONGSON64 + help + Say Y here if you want to enable PCI controller support on + Loongson systems. + +config PCIE_MICROCHIP_HOST + bool "Microchip AXI PCIe host bridge support" + depends on PCI_MSI && OF + select PCI_MSI_IRQ_DOMAIN + select GENERIC_MSI_IRQ_DOMAIN + select PCI_HOST_COMMON + help + Say Y here if you want kernel to support the Microchip AXI PCIe + Host Bridge driver. + +config PCIE_HISI_ERR + depends on ACPI_APEI_GHES && (ARM64 || COMPILE_TEST) + bool "HiSilicon HIP PCIe controller error handling driver" + help + Say Y here if you want error handling support + for the PCIe controller's errors on HiSilicon HIP SoCs + +config PCIE_APPLE_MSI_DOORBELL_ADDR + hex + default 0xfffff000 + depends on PCIE_APPLE + +config PCIE_APPLE + tristate "Apple PCIe controller" + depends on ARCH_APPLE || COMPILE_TEST + depends on OF + depends on PCI_MSI_IRQ_DOMAIN + select PCI_HOST_COMMON + help + Say Y here if you want to enable PCIe controller support on Apple + system-on-chips, like the Apple M1. This is required for the USB + type-A ports, Ethernet, Wi-Fi, and Bluetooth. + + If unsure, say Y if you have an Apple Silicon system. + +config PCIE_MT7621 + tristate "MediaTek MT7621 PCIe Controller" + depends on SOC_MT7621 || COMPILE_TEST + select PHY_MT7621_PCI + default SOC_MT7621 + help + This selects a driver for the MediaTek MT7621 PCIe Controller. + +source "drivers/pci/controller/dwc/Kconfig" +source "drivers/pci/controller/mobiveil/Kconfig" +source "drivers/pci/controller/cadence/Kconfig" +endmenu |