summaryrefslogtreecommitdiffstats
path: root/drivers/pci/quirks.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/quirks.c')
-rw-r--r--drivers/pci/quirks.c6076
1 files changed, 6076 insertions, 0 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
new file mode 100644
index 000000000..8765544ba
--- /dev/null
+++ b/drivers/pci/quirks.c
@@ -0,0 +1,6076 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file contains work-arounds for many known PCI hardware bugs.
+ * Devices present only on certain architectures (host bridges et cetera)
+ * should be handled in arch-specific code.
+ *
+ * Note: any quirks for hotpluggable devices must _NOT_ be declared __init.
+ *
+ * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
+ *
+ * Init/reset quirks for USB host controllers should be in the USB quirks
+ * file, where their drivers can use them.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/isa-dma.h> /* isa_dma_bridge_buggy */
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/ktime.h>
+#include <linux/mm.h>
+#include <linux/nvme.h>
+#include <linux/platform_data/x86/apple.h>
+#include <linux/pm_runtime.h>
+#include <linux/suspend.h>
+#include <linux/switchtec.h>
+#include "pci.h"
+
+static ktime_t fixup_debug_start(struct pci_dev *dev,
+ void (*fn)(struct pci_dev *dev))
+{
+ if (initcall_debug)
+ pci_info(dev, "calling %pS @ %i\n", fn, task_pid_nr(current));
+
+ return ktime_get();
+}
+
+static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime,
+ void (*fn)(struct pci_dev *dev))
+{
+ ktime_t delta, rettime;
+ unsigned long long duration;
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+ if (initcall_debug || duration > 10000)
+ pci_info(dev, "%pS took %lld usecs\n", fn, duration);
+}
+
+static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
+ struct pci_fixup *end)
+{
+ ktime_t calltime;
+
+ for (; f < end; f++)
+ if ((f->class == (u32) (dev->class >> f->class_shift) ||
+ f->class == (u32) PCI_ANY_ID) &&
+ (f->vendor == dev->vendor ||
+ f->vendor == (u16) PCI_ANY_ID) &&
+ (f->device == dev->device ||
+ f->device == (u16) PCI_ANY_ID)) {
+ void (*hook)(struct pci_dev *dev);
+#ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS
+ hook = offset_to_ptr(&f->hook_offset);
+#else
+ hook = f->hook;
+#endif
+ calltime = fixup_debug_start(dev, hook);
+ hook(dev);
+ fixup_debug_report(dev, calltime, hook);
+ }
+}
+
+extern struct pci_fixup __start_pci_fixups_early[];
+extern struct pci_fixup __end_pci_fixups_early[];
+extern struct pci_fixup __start_pci_fixups_header[];
+extern struct pci_fixup __end_pci_fixups_header[];
+extern struct pci_fixup __start_pci_fixups_final[];
+extern struct pci_fixup __end_pci_fixups_final[];
+extern struct pci_fixup __start_pci_fixups_enable[];
+extern struct pci_fixup __end_pci_fixups_enable[];
+extern struct pci_fixup __start_pci_fixups_resume[];
+extern struct pci_fixup __end_pci_fixups_resume[];
+extern struct pci_fixup __start_pci_fixups_resume_early[];
+extern struct pci_fixup __end_pci_fixups_resume_early[];
+extern struct pci_fixup __start_pci_fixups_suspend[];
+extern struct pci_fixup __end_pci_fixups_suspend[];
+extern struct pci_fixup __start_pci_fixups_suspend_late[];
+extern struct pci_fixup __end_pci_fixups_suspend_late[];
+
+static bool pci_apply_fixup_final_quirks;
+
+void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
+{
+ struct pci_fixup *start, *end;
+
+ switch (pass) {
+ case pci_fixup_early:
+ start = __start_pci_fixups_early;
+ end = __end_pci_fixups_early;
+ break;
+
+ case pci_fixup_header:
+ start = __start_pci_fixups_header;
+ end = __end_pci_fixups_header;
+ break;
+
+ case pci_fixup_final:
+ if (!pci_apply_fixup_final_quirks)
+ return;
+ start = __start_pci_fixups_final;
+ end = __end_pci_fixups_final;
+ break;
+
+ case pci_fixup_enable:
+ start = __start_pci_fixups_enable;
+ end = __end_pci_fixups_enable;
+ break;
+
+ case pci_fixup_resume:
+ start = __start_pci_fixups_resume;
+ end = __end_pci_fixups_resume;
+ break;
+
+ case pci_fixup_resume_early:
+ start = __start_pci_fixups_resume_early;
+ end = __end_pci_fixups_resume_early;
+ break;
+
+ case pci_fixup_suspend:
+ start = __start_pci_fixups_suspend;
+ end = __end_pci_fixups_suspend;
+ break;
+
+ case pci_fixup_suspend_late:
+ start = __start_pci_fixups_suspend_late;
+ end = __end_pci_fixups_suspend_late;
+ break;
+
+ default:
+ /* stupid compiler warning, you would think with an enum... */
+ return;
+ }
+ pci_do_fixups(dev, start, end);
+}
+EXPORT_SYMBOL(pci_fixup_device);
+
+static int __init pci_apply_final_quirks(void)
+{
+ struct pci_dev *dev = NULL;
+ u8 cls = 0;
+ u8 tmp;
+
+ if (pci_cache_line_size)
+ pr_info("PCI: CLS %u bytes\n", pci_cache_line_size << 2);
+
+ pci_apply_fixup_final_quirks = true;
+ for_each_pci_dev(dev) {
+ pci_fixup_device(pci_fixup_final, dev);
+ /*
+ * If arch hasn't set it explicitly yet, use the CLS
+ * value shared by all PCI devices. If there's a
+ * mismatch, fall back to the default value.
+ */
+ if (!pci_cache_line_size) {
+ pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp);
+ if (!cls)
+ cls = tmp;
+ if (!tmp || cls == tmp)
+ continue;
+
+ pci_info(dev, "CLS mismatch (%u != %u), using %u bytes\n",
+ cls << 2, tmp << 2,
+ pci_dfl_cache_line_size << 2);
+ pci_cache_line_size = pci_dfl_cache_line_size;
+ }
+ }
+
+ if (!pci_cache_line_size) {
+ pr_info("PCI: CLS %u bytes, default %u\n", cls << 2,
+ pci_dfl_cache_line_size << 2);
+ pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size;
+ }
+
+ return 0;
+}
+fs_initcall_sync(pci_apply_final_quirks);
+
+/*
+ * Decoding should be disabled for a PCI device during BAR sizing to avoid
+ * conflict. But doing so may cause problems on host bridge and perhaps other
+ * key system devices. For devices that need to have mmio decoding always-on,
+ * we need to set the dev->mmio_always_on bit.
+ */
+static void quirk_mmio_always_on(struct pci_dev *dev)
+{
+ dev->mmio_always_on = 1;
+}
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
+
+/*
+ * The Mellanox Tavor device gives false positive parity errors. Disable
+ * parity error reporting.
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, pci_disable_parity);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, pci_disable_parity);
+
+/*
+ * Deal with broken BIOSes that neglect to enable passive release,
+ * which can cause problems in combination with the 82441FX/PPro MTRRs
+ */
+static void quirk_passive_release(struct pci_dev *dev)
+{
+ struct pci_dev *d = NULL;
+ unsigned char dlc;
+
+ /*
+ * We have to make sure a particular bit is set in the PIIX3
+ * ISA bridge, so we have to go out and find it.
+ */
+ while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) {
+ pci_read_config_byte(d, 0x82, &dlc);
+ if (!(dlc & 1<<1)) {
+ pci_info(d, "PIIX3: Enabling Passive Release\n");
+ dlc |= 1<<1;
+ pci_write_config_byte(d, 0x82, dlc);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
+
+#ifdef CONFIG_X86_32
+/*
+ * The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a
+ * workaround but VIA don't answer queries. If you happen to have good
+ * contacts at VIA ask them for me please -- Alan
+ *
+ * This appears to be BIOS not version dependent. So presumably there is a
+ * chipset level fix.
+ */
+static void quirk_isa_dma_hangs(struct pci_dev *dev)
+{
+ if (!isa_dma_bridge_buggy) {
+ isa_dma_bridge_buggy = 1;
+ pci_info(dev, "Activating ISA DMA hang workarounds\n");
+ }
+}
+/*
+ * It's not totally clear which chipsets are the problematic ones. We know
+ * 82C586 and 82C596 variants are affected.
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs);
+#endif
+
+/*
+ * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
+ * for some HT machines to use C4 w/o hanging.
+ */
+static void quirk_tigerpoint_bm_sts(struct pci_dev *dev)
+{
+ u32 pmbase;
+ u16 pm1a;
+
+ pci_read_config_dword(dev, 0x40, &pmbase);
+ pmbase = pmbase & 0xff80;
+ pm1a = inw(pmbase);
+
+ if (pm1a & 0x10) {
+ pci_info(dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n");
+ outw(0x10, pmbase);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
+
+/* Chipsets where PCI->PCI transfers vanish or hang */
+static void quirk_nopcipci(struct pci_dev *dev)
+{
+ if ((pci_pci_problems & PCIPCI_FAIL) == 0) {
+ pci_info(dev, "Disabling direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_FAIL;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci);
+
+static void quirk_nopciamd(struct pci_dev *dev)
+{
+ u8 rev;
+ pci_read_config_byte(dev, 0x08, &rev);
+ if (rev == 0x13) {
+ /* Erratum 24 */
+ pci_info(dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n");
+ pci_pci_problems |= PCIAGP_FAIL;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd);
+
+/* Triton requires workarounds to be used by the drivers */
+static void quirk_triton(struct pci_dev *dev)
+{
+ if ((pci_pci_problems&PCIPCI_TRITON) == 0) {
+ pci_info(dev, "Limiting direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_TRITON;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton);
+
+/*
+ * VIA Apollo KT133 needs PCI latency patch
+ * Made according to a Windows driver-based patch by George E. Breese;
+ * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
+ * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for the info on
+ * which Mr Breese based his work.
+ *
+ * Updated based on further information from the site and also on
+ * information provided by VIA
+ */
+static void quirk_vialatency(struct pci_dev *dev)
+{
+ struct pci_dev *p;
+ u8 busarb;
+
+ /*
+ * Ok, we have a potential problem chipset here. Now see if we have
+ * a buggy southbridge.
+ */
+ p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL);
+ if (p != NULL) {
+
+ /*
+ * 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A;
+ * thanks Dan Hollis.
+ * Check for buggy part revisions
+ */
+ if (p->revision < 0x40 || p->revision > 0x42)
+ goto exit;
+ } else {
+ p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
+ if (p == NULL) /* No problem parts */
+ goto exit;
+
+ /* Check for buggy part revisions */
+ if (p->revision < 0x10 || p->revision > 0x12)
+ goto exit;
+ }
+
+ /*
+ * Ok we have the problem. Now set the PCI master grant to occur
+ * every master grant. The apparent bug is that under high PCI load
+ * (quite common in Linux of course) you can get data loss when the
+ * CPU is held off the bus for 3 bus master requests. This happens
+ * to include the IDE controllers....
+ *
+ * VIA only apply this fix when an SB Live! is present but under
+ * both Linux and Windows this isn't enough, and we have seen
+ * corruption without SB Live! but with things like 3 UDMA IDE
+ * controllers. So we ignore that bit of the VIA recommendation..
+ */
+ pci_read_config_byte(dev, 0x76, &busarb);
+
+ /*
+ * Set bit 4 and bit 5 of byte 76 to 0x01
+ * "Master priority rotation on every PCI master grant"
+ */
+ busarb &= ~(1<<5);
+ busarb |= (1<<4);
+ pci_write_config_byte(dev, 0x76, busarb);
+ pci_info(dev, "Applying VIA southbridge workaround\n");
+exit:
+ pci_dev_put(p);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency);
+/* Must restore this on a resume from RAM */
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency);
+
+/* VIA Apollo VP3 needs ETBF on BT848/878 */
+static void quirk_viaetbf(struct pci_dev *dev)
+{
+ if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) {
+ pci_info(dev, "Limiting direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_VIAETBF;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf);
+
+static void quirk_vsfx(struct pci_dev *dev)
+{
+ if ((pci_pci_problems&PCIPCI_VSFX) == 0) {
+ pci_info(dev, "Limiting direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_VSFX;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx);
+
+/*
+ * ALi Magik requires workarounds to be used by the drivers that DMA to AGP
+ * space. Latency must be set to 0xA and Triton workaround applied too.
+ * [Info kindly provided by ALi]
+ */
+static void quirk_alimagik(struct pci_dev *dev)
+{
+ if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) {
+ pci_info(dev, "Limiting direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik);
+
+/* Natoma has some interesting boundary conditions with Zoran stuff at least */
+static void quirk_natoma(struct pci_dev *dev)
+{
+ if ((pci_pci_problems&PCIPCI_NATOMA) == 0) {
+ pci_info(dev, "Limiting direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_NATOMA;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma);
+
+/*
+ * This chip can cause PCI parity errors if config register 0xA0 is read
+ * while DMAs are occurring.
+ */
+static void quirk_citrine(struct pci_dev *dev)
+{
+ dev->cfg_size = 0xA0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine);
+
+/*
+ * This chip can cause bus lockups if config addresses above 0x600
+ * are read or written.
+ */
+static void quirk_nfp6000(struct pci_dev *dev)
+{
+ dev->cfg_size = 0x600;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP4000, quirk_nfp6000);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000, quirk_nfp6000);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP5000, quirk_nfp6000);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000_VF, quirk_nfp6000);
+
+/* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */
+static void quirk_extend_bar_to_page(struct pci_dev *dev)
+{
+ int i;
+
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+ struct resource *r = &dev->resource[i];
+
+ if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) {
+ r->end = PAGE_SIZE - 1;
+ r->start = 0;
+ r->flags |= IORESOURCE_UNSET;
+ pci_info(dev, "expanded BAR %d to page size: %pR\n",
+ i, r);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page);
+
+/*
+ * S3 868 and 968 chips report region size equal to 32M, but they decode 64M.
+ * If it's needed, re-allocate the region.
+ */
+static void quirk_s3_64M(struct pci_dev *dev)
+{
+ struct resource *r = &dev->resource[0];
+
+ if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) {
+ r->flags |= IORESOURCE_UNSET;
+ r->start = 0;
+ r->end = 0x3ffffff;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M);
+
+static void quirk_io(struct pci_dev *dev, int pos, unsigned int size,
+ const char *name)
+{
+ u32 region;
+ struct pci_bus_region bus_region;
+ struct resource *res = dev->resource + pos;
+
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), &region);
+
+ if (!region)
+ return;
+
+ res->name = pci_name(dev);
+ res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK;
+ res->flags |=
+ (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN);
+ region &= ~(size - 1);
+
+ /* Convert from PCI bus to resource space */
+ bus_region.start = region;
+ bus_region.end = region + size - 1;
+ pcibios_bus_to_resource(dev->bus, res, &bus_region);
+
+ pci_info(dev, FW_BUG "%s quirk: reg 0x%x: %pR\n",
+ name, PCI_BASE_ADDRESS_0 + (pos << 2), res);
+}
+
+/*
+ * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS
+ * ver. 1.33 20070103) don't set the correct ISA PCI region header info.
+ * BAR0 should be 8 bytes; instead, it may be set to something like 8k
+ * (which conflicts w/ BAR1's memory range).
+ *
+ * CS553x's ISA PCI BARs may also be read-only (ref:
+ * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward).
+ */
+static void quirk_cs5536_vsa(struct pci_dev *dev)
+{
+ static char *name = "CS5536 ISA bridge";
+
+ if (pci_resource_len(dev, 0) != 8) {
+ quirk_io(dev, 0, 8, name); /* SMB */
+ quirk_io(dev, 1, 256, name); /* GPIO */
+ quirk_io(dev, 2, 64, name); /* MFGPT */
+ pci_info(dev, "%s bug detected (incorrect header); workaround applied\n",
+ name);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
+
+static void quirk_io_region(struct pci_dev *dev, int port,
+ unsigned int size, int nr, const char *name)
+{
+ u16 region;
+ struct pci_bus_region bus_region;
+ struct resource *res = dev->resource + nr;
+
+ pci_read_config_word(dev, port, &region);
+ region &= ~(size - 1);
+
+ if (!region)
+ return;
+
+ res->name = pci_name(dev);
+ res->flags = IORESOURCE_IO;
+
+ /* Convert from PCI bus to resource space */
+ bus_region.start = region;
+ bus_region.end = region + size - 1;
+ pcibios_bus_to_resource(dev->bus, res, &bus_region);
+
+ if (!pci_claim_resource(dev, nr))
+ pci_info(dev, "quirk: %pR claimed by %s\n", res, name);
+}
+
+/*
+ * ATI Northbridge setups MCE the processor if you even read somewhere
+ * between 0x3b0->0x3bb or read 0x3d3
+ */
+static void quirk_ati_exploding_mce(struct pci_dev *dev)
+{
+ pci_info(dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n");
+ /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */
+ request_region(0x3b0, 0x0C, "RadeonIGP");
+ request_region(0x3d3, 0x01, "RadeonIGP");
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce);
+
+/*
+ * In the AMD NL platform, this device ([1022:7912]) has a class code of
+ * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will
+ * claim it. The same applies on the VanGogh platform device ([1022:163a]).
+ *
+ * But the dwc3 driver is a more specific driver for this device, and we'd
+ * prefer to use it instead of xhci. To prevent xhci from claiming the
+ * device, change the class code to 0x0c03fe, which the PCI r3.0 spec
+ * defines as "USB device (not host controller)". The dwc3 driver can then
+ * claim it based on its Vendor and Device ID.
+ */
+static void quirk_amd_dwc_class(struct pci_dev *pdev)
+{
+ u32 class = pdev->class;
+
+ /* Use "USB Device (not host controller)" class */
+ pdev->class = PCI_CLASS_SERIAL_USB_DEVICE;
+ pci_info(pdev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n",
+ class, pdev->class);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB,
+ quirk_amd_dwc_class);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VANGOGH_USB,
+ quirk_amd_dwc_class);
+
+/*
+ * Synopsys USB 3.x host HAPS platform has a class code of
+ * PCI_CLASS_SERIAL_USB_XHCI, and xhci driver can claim it. However, these
+ * devices should use dwc3-haps driver. Change these devices' class code to
+ * PCI_CLASS_SERIAL_USB_DEVICE to prevent the xhci-pci driver from claiming
+ * them.
+ */
+static void quirk_synopsys_haps(struct pci_dev *pdev)
+{
+ u32 class = pdev->class;
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3:
+ case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI:
+ case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31:
+ pdev->class = PCI_CLASS_SERIAL_USB_DEVICE;
+ pci_info(pdev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n",
+ class, pdev->class);
+ break;
+ }
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_USB_XHCI, 0,
+ quirk_synopsys_haps);
+
+/*
+ * Let's make the southbridge information explicit instead of having to
+ * worry about people probing the ACPI areas, for example.. (Yes, it
+ * happens, and if you read the wrong ACPI register it will put the machine
+ * to sleep with no way of waking it up again. Bummer).
+ *
+ * ALI M7101: Two IO regions pointed to by words at
+ * 0xE0 (64 bytes of ACPI registers)
+ * 0xE2 (32 bytes of SMB registers)
+ */
+static void quirk_ali7101_acpi(struct pci_dev *dev)
+{
+ quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI");
+ quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi);
+
+static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
+{
+ u32 devres;
+ u32 mask, size, base;
+
+ pci_read_config_dword(dev, port, &devres);
+ if ((devres & enable) != enable)
+ return;
+ mask = (devres >> 16) & 15;
+ base = devres & 0xffff;
+ size = 16;
+ for (;;) {
+ unsigned int bit = size >> 1;
+ if ((bit & mask) == bit)
+ break;
+ size = bit;
+ }
+ /*
+ * For now we only print it out. Eventually we'll want to
+ * reserve it (at least if it's in the 0x1000+ range), but
+ * let's get enough confirmation reports first.
+ */
+ base &= -size;
+ pci_info(dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1);
+}
+
+static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
+{
+ u32 devres;
+ u32 mask, size, base;
+
+ pci_read_config_dword(dev, port, &devres);
+ if ((devres & enable) != enable)
+ return;
+ base = devres & 0xffff0000;
+ mask = (devres & 0x3f) << 16;
+ size = 128 << 16;
+ for (;;) {
+ unsigned int bit = size >> 1;
+ if ((bit & mask) == bit)
+ break;
+ size = bit;
+ }
+
+ /*
+ * For now we only print it out. Eventually we'll want to
+ * reserve it, but let's get enough confirmation reports first.
+ */
+ base &= -size;
+ pci_info(dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1);
+}
+
+/*
+ * PIIX4 ACPI: Two IO regions pointed to by longwords at
+ * 0x40 (64 bytes of ACPI registers)
+ * 0x90 (16 bytes of SMB registers)
+ * and a few strange programmable PIIX4 device resources.
+ */
+static void quirk_piix4_acpi(struct pci_dev *dev)
+{
+ u32 res_a;
+
+ quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
+ quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
+
+ /* Device resource A has enables for some of the other ones */
+ pci_read_config_dword(dev, 0x5c, &res_a);
+
+ piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21);
+ piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21);
+
+ /* Device resource D is just bitfields for static resources */
+
+ /* Device 12 enabled? */
+ if (res_a & (1 << 29)) {
+ piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20);
+ piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7);
+ }
+ /* Device 13 enabled? */
+ if (res_a & (1 << 30)) {
+ piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20);
+ piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7);
+ }
+ piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20);
+ piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi);
+
+#define ICH_PMBASE 0x40
+#define ICH_ACPI_CNTL 0x44
+#define ICH4_ACPI_EN 0x10
+#define ICH6_ACPI_EN 0x80
+#define ICH4_GPIOBASE 0x58
+#define ICH4_GPIO_CNTL 0x5c
+#define ICH4_GPIO_EN 0x10
+#define ICH6_GPIOBASE 0x48
+#define ICH6_GPIO_CNTL 0x4c
+#define ICH6_GPIO_EN 0x10
+
+/*
+ * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
+ * 0x40 (128 bytes of ACPI, GPIO & TCO registers)
+ * 0x58 (64 bytes of GPIO I/O space)
+ */
+static void quirk_ich4_lpc_acpi(struct pci_dev *dev)
+{
+ u8 enable;
+
+ /*
+ * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict
+ * with low legacy (and fixed) ports. We don't know the decoding
+ * priority and can't tell whether the legacy device or the one created
+ * here is really at that address. This happens on boards with broken
+ * BIOSes.
+ */
+ pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
+ if (enable & ICH4_ACPI_EN)
+ quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES,
+ "ICH4 ACPI/GPIO/TCO");
+
+ pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable);
+ if (enable & ICH4_GPIO_EN)
+ quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1,
+ "ICH4 GPIO");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi);
+
+static void ich6_lpc_acpi_gpio(struct pci_dev *dev)
+{
+ u8 enable;
+
+ pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
+ if (enable & ICH6_ACPI_EN)
+ quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES,
+ "ICH6 ACPI/GPIO/TCO");
+
+ pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable);
+ if (enable & ICH6_GPIO_EN)
+ quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1,
+ "ICH6 GPIO");
+}
+
+static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned int reg,
+ const char *name, int dynsize)
+{
+ u32 val;
+ u32 size, base;
+
+ pci_read_config_dword(dev, reg, &val);
+
+ /* Enabled? */
+ if (!(val & 1))
+ return;
+ base = val & 0xfffc;
+ if (dynsize) {
+ /*
+ * This is not correct. It is 16, 32 or 64 bytes depending on
+ * register D31:F0:ADh bits 5:4.
+ *
+ * But this gets us at least _part_ of it.
+ */
+ size = 16;
+ } else {
+ size = 128;
+ }
+ base &= ~(size-1);
+
+ /*
+ * Just print it out for now. We should reserve it after more
+ * debugging.
+ */
+ pci_info(dev, "%s PIO at %04x-%04x\n", name, base, base+size-1);
+}
+
+static void quirk_ich6_lpc(struct pci_dev *dev)
+{
+ /* Shared ACPI/GPIO decode with all ICH6+ */
+ ich6_lpc_acpi_gpio(dev);
+
+ /* ICH6-specific generic IO decode */
+ ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0);
+ ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc);
+
+static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned int reg,
+ const char *name)
+{
+ u32 val;
+ u32 mask, base;
+
+ pci_read_config_dword(dev, reg, &val);
+
+ /* Enabled? */
+ if (!(val & 1))
+ return;
+
+ /* IO base in bits 15:2, mask in bits 23:18, both are dword-based */
+ base = val & 0xfffc;
+ mask = (val >> 16) & 0xfc;
+ mask |= 3;
+
+ /*
+ * Just print it out for now. We should reserve it after more
+ * debugging.
+ */
+ pci_info(dev, "%s PIO at %04x (mask %04x)\n", name, base, mask);
+}
+
+/* ICH7-10 has the same common LPC generic IO decode registers */
+static void quirk_ich7_lpc(struct pci_dev *dev)
+{
+ /* We share the common ACPI/GPIO decode with ICH6 */
+ ich6_lpc_acpi_gpio(dev);
+
+ /* And have 4 ICH7+ generic decodes */
+ ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1");
+ ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2");
+ ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3");
+ ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc);
+
+/*
+ * VIA ACPI: One IO region pointed to by longword at
+ * 0x48 or 0x20 (256 bytes of ACPI registers)
+ */
+static void quirk_vt82c586_acpi(struct pci_dev *dev)
+{
+ if (dev->revision & 0x10)
+ quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES,
+ "vt82c586 ACPI");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi);
+
+/*
+ * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at
+ * 0x48 (256 bytes of ACPI registers)
+ * 0x70 (128 bytes of hardware monitoring register)
+ * 0x90 (16 bytes of SMB registers)
+ */
+static void quirk_vt82c686_acpi(struct pci_dev *dev)
+{
+ quirk_vt82c586_acpi(dev);
+
+ quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1,
+ "vt82c686 HW-mon");
+
+ quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi);
+
+/*
+ * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at
+ * 0x88 (128 bytes of power management registers)
+ * 0xd0 (16 bytes of SMB registers)
+ */
+static void quirk_vt8235_acpi(struct pci_dev *dev)
+{
+ quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM");
+ quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
+
+/*
+ * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast
+ * back-to-back: Disable fast back-to-back on the secondary bus segment
+ */
+static void quirk_xio2000a(struct pci_dev *dev)
+{
+ struct pci_dev *pdev;
+ u16 command;
+
+ pci_warn(dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n");
+ list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
+ pci_read_config_word(pdev, PCI_COMMAND, &command);
+ if (command & PCI_COMMAND_FAST_BACK)
+ pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
+ quirk_xio2000a);
+
+#ifdef CONFIG_X86_IO_APIC
+
+#include <asm/io_apic.h>
+
+/*
+ * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip
+ * devices to the external APIC.
+ *
+ * TODO: When we have device-specific interrupt routers, this code will go
+ * away from quirks.
+ */
+static void quirk_via_ioapic(struct pci_dev *dev)
+{
+ u8 tmp;
+
+ if (nr_ioapics < 1)
+ tmp = 0; /* nothing routed to external APIC */
+ else
+ tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
+
+ pci_info(dev, "%s VIA external APIC routing\n",
+ tmp ? "Enabling" : "Disabling");
+
+ /* Offset 0x58: External APIC IRQ output control */
+ pci_write_config_byte(dev, 0x58, tmp);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
+
+/*
+ * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit.
+ * This leads to doubled level interrupt rates.
+ * Set this bit to get rid of cycle wastage.
+ * Otherwise uncritical.
+ */
+static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
+{
+ u8 misc_control2;
+#define BYPASS_APIC_DEASSERT 8
+
+ pci_read_config_byte(dev, 0x5B, &misc_control2);
+ if (!(misc_control2 & BYPASS_APIC_DEASSERT)) {
+ pci_info(dev, "Bypassing VIA 8237 APIC De-Assert Message\n");
+ pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
+
+/*
+ * The AMD IO-APIC can hang the box when an APIC IRQ is masked.
+ * We check all revs >= B0 (yet not in the pre production!) as the bug
+ * is currently marked NoFix
+ *
+ * We have multiple reports of hangs with this chipset that went away with
+ * noapic specified. For the moment we assume it's the erratum. We may be wrong
+ * of course. However the advice is demonstrably good even if so.
+ */
+static void quirk_amd_ioapic(struct pci_dev *dev)
+{
+ if (dev->revision >= 0x02) {
+ pci_warn(dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
+ pci_warn(dev, " : booting with the \"noapic\" option\n");
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic);
+#endif /* CONFIG_X86_IO_APIC */
+
+#if defined(CONFIG_ARM64) && defined(CONFIG_PCI_ATS)
+
+static void quirk_cavium_sriov_rnm_link(struct pci_dev *dev)
+{
+ /* Fix for improper SR-IOV configuration on Cavium cn88xx RNM device */
+ if (dev->subsystem_device == 0xa118)
+ dev->sriov->link = dev->devfn;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CAVIUM, 0xa018, quirk_cavium_sriov_rnm_link);
+#endif
+
+/*
+ * Some settings of MMRBC can lead to data corruption so block changes.
+ * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
+ */
+static void quirk_amd_8131_mmrbc(struct pci_dev *dev)
+{
+ if (dev->subordinate && dev->revision <= 0x12) {
+ pci_info(dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n",
+ dev->revision);
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc);
+
+/*
+ * FIXME: it is questionable that quirk_via_acpi() is needed. It shows up
+ * as an ISA bridge, and does not support the PCI_INTERRUPT_LINE register
+ * at all. Therefore it seems like setting the pci_dev's IRQ to the value
+ * of the ACPI SCI interrupt is only done for convenience.
+ * -jgarzik
+ */
+static void quirk_via_acpi(struct pci_dev *d)
+{
+ u8 irq;
+
+ /* VIA ACPI device: SCI IRQ line in PCI config byte 0x42 */
+ pci_read_config_byte(d, 0x42, &irq);
+ irq &= 0xf;
+ if (irq && (irq != 2))
+ d->irq = irq;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi);
+
+/* VIA bridges which have VLink */
+static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18;
+
+static void quirk_via_bridge(struct pci_dev *dev)
+{
+ /* See what bridge we have and find the device ranges */
+ switch (dev->device) {
+ case PCI_DEVICE_ID_VIA_82C686:
+ /*
+ * The VT82C686 is special; it attaches to PCI and can have
+ * any device number. All its subdevices are functions of
+ * that single device.
+ */
+ via_vlink_dev_lo = PCI_SLOT(dev->devfn);
+ via_vlink_dev_hi = PCI_SLOT(dev->devfn);
+ break;
+ case PCI_DEVICE_ID_VIA_8237:
+ case PCI_DEVICE_ID_VIA_8237A:
+ via_vlink_dev_lo = 15;
+ break;
+ case PCI_DEVICE_ID_VIA_8235:
+ via_vlink_dev_lo = 16;
+ break;
+ case PCI_DEVICE_ID_VIA_8231:
+ case PCI_DEVICE_ID_VIA_8233_0:
+ case PCI_DEVICE_ID_VIA_8233A:
+ case PCI_DEVICE_ID_VIA_8233C_0:
+ via_vlink_dev_lo = 17;
+ break;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge);
+
+/*
+ * quirk_via_vlink - VIA VLink IRQ number update
+ * @dev: PCI device
+ *
+ * If the device we are dealing with is on a PIC IRQ we need to ensure that
+ * the IRQ line register which usually is not relevant for PCI cards, is
+ * actually written so that interrupts get sent to the right place.
+ *
+ * We only do this on systems where a VIA south bridge was detected, and
+ * only for VIA devices on the motherboard (see quirk_via_bridge above).
+ */
+static void quirk_via_vlink(struct pci_dev *dev)
+{
+ u8 irq, new_irq;
+
+ /* Check if we have VLink at all */
+ if (via_vlink_dev_lo == -1)
+ return;
+
+ new_irq = dev->irq;
+
+ /* Don't quirk interrupts outside the legacy IRQ range */
+ if (!new_irq || new_irq > 15)
+ return;
+
+ /* Internal device ? */
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi ||
+ PCI_SLOT(dev->devfn) < via_vlink_dev_lo)
+ return;
+
+ /*
+ * This is an internal VLink device on a PIC interrupt. The BIOS
+ * ought to have set this but may not have, so we redo it.
+ */
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+ if (new_irq != irq) {
+ pci_info(dev, "VIA VLink IRQ fixup, from %d to %d\n",
+ irq, new_irq);
+ udelay(15); /* unknown if delay really needed */
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
+ }
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink);
+
+/*
+ * VIA VT82C598 has its device ID settable and many BIOSes set it to the ID
+ * of VT82C597 for backward compatibility. We need to switch it off to be
+ * able to recognize the real type of the chip.
+ */
+static void quirk_vt82c598_id(struct pci_dev *dev)
+{
+ pci_write_config_byte(dev, 0xfc, 0);
+ pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id);
+
+/*
+ * CardBus controllers have a legacy base address that enables them to
+ * respond as i82365 pcmcia controllers. We don't want them to do this
+ * even if the Linux CardBus driver is not loaded, because the Linux i82365
+ * driver does not (and should not) handle CardBus.
+ */
+static void quirk_cardbus_legacy(struct pci_dev *dev)
+{
+ pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy);
+DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy);
+
+/*
+ * Following the PCI ordering rules is optional on the AMD762. I'm not sure
+ * what the designers were smoking but let's not inhale...
+ *
+ * To be fair to AMD, it follows the spec by default, it's BIOS people who
+ * turn it off!
+ */
+static void quirk_amd_ordering(struct pci_dev *dev)
+{
+ u32 pcic;
+ pci_read_config_dword(dev, 0x4C, &pcic);
+ if ((pcic & 6) != 6) {
+ pcic |= 6;
+ pci_warn(dev, "BIOS failed to enable PCI standards compliance; fixing this error\n");
+ pci_write_config_dword(dev, 0x4C, pcic);
+ pci_read_config_dword(dev, 0x84, &pcic);
+ pcic |= (1 << 23); /* Required in this mode */
+ pci_write_config_dword(dev, 0x84, pcic);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
+
+/*
+ * DreamWorks-provided workaround for Dunord I-3000 problem
+ *
+ * This card decodes and responds to addresses not apparently assigned to
+ * it. We force a larger allocation to ensure that nothing gets put too
+ * close to it.
+ */
+static void quirk_dunord(struct pci_dev *dev)
+{
+ struct resource *r = &dev->resource[1];
+
+ r->flags |= IORESOURCE_UNSET;
+ r->start = 0;
+ r->end = 0xffffff;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord);
+
+/*
+ * i82380FB mobile docking controller: its PCI-to-PCI bridge is subtractive
+ * decoding (transparent), and does indicate this in the ProgIf.
+ * Unfortunately, the ProgIf value is wrong - 0x80 instead of 0x01.
+ */
+static void quirk_transparent_bridge(struct pci_dev *dev)
+{
+ dev->transparent = 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge);
+
+/*
+ * Common misconfiguration of the MediaGX/Geode PCI master that will reduce
+ * PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 datasheets
+ * found at http://www.national.com/analog for info on what these bits do.
+ * <christer@weinigel.se>
+ */
+static void quirk_mediagx_master(struct pci_dev *dev)
+{
+ u8 reg;
+
+ pci_read_config_byte(dev, 0x41, &reg);
+ if (reg & 2) {
+ reg &= ~2;
+ pci_info(dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n",
+ reg);
+ pci_write_config_byte(dev, 0x41, reg);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master);
+
+/*
+ * Ensure C0 rev restreaming is off. This is normally done by the BIOS but
+ * in the odd case it is not the results are corruption hence the presence
+ * of a Linux check.
+ */
+static void quirk_disable_pxb(struct pci_dev *pdev)
+{
+ u16 config;
+
+ if (pdev->revision != 0x04) /* Only C0 requires this */
+ return;
+ pci_read_config_word(pdev, 0x40, &config);
+ if (config & (1<<6)) {
+ config &= ~(1<<6);
+ pci_write_config_word(pdev, 0x40, config);
+ pci_info(pdev, "C0 revision 450NX. Disabling PCI restreaming\n");
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
+
+static void quirk_amd_ide_mode(struct pci_dev *pdev)
+{
+ /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
+ u8 tmp;
+
+ pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
+ if (tmp == 0x01) {
+ pci_read_config_byte(pdev, 0x40, &tmp);
+ pci_write_config_byte(pdev, 0x40, tmp|1);
+ pci_write_config_byte(pdev, 0x9, 1);
+ pci_write_config_byte(pdev, 0xa, 6);
+ pci_write_config_byte(pdev, 0x40, tmp);
+
+ pdev->class = PCI_CLASS_STORAGE_SATA_AHCI;
+ pci_info(pdev, "set SATA to AHCI mode\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
+
+/* Serverworks CSB5 IDE does not fully support native mode */
+static void quirk_svwks_csb5ide(struct pci_dev *pdev)
+{
+ u8 prog;
+ pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
+ if (prog & 5) {
+ prog &= ~5;
+ pdev->class &= ~5;
+ pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
+ /* PCI layer will sort out resources */
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide);
+
+/* Intel 82801CAM ICH3-M datasheet says IDE modes must be the same */
+static void quirk_ide_samemode(struct pci_dev *pdev)
+{
+ u8 prog;
+
+ pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
+
+ if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) {
+ pci_info(pdev, "IDE mode mismatch; forcing legacy mode\n");
+ prog &= ~5;
+ pdev->class &= ~5;
+ pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
+
+/* Some ATA devices break if put into D3 */
+static void quirk_no_ata_d3(struct pci_dev *pdev)
+{
+ pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
+}
+/* Quirk the legacy ATA devices only. The AHCI ones are ok */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+/* ALi loses some register settings that we cannot then restore */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
+ occur when mode detecting */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+
+/*
+ * This was originally an Alpha-specific thing, but it really fits here.
+ * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
+ */
+static void quirk_eisa_bridge(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_EISA << 8;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge);
+
+/*
+ * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
+ * is not activated. The myth is that Asus said that they do not want the
+ * users to be irritated by just another PCI Device in the Win98 device
+ * manager. (see the file prog/hotplug/README.p4b in the lm_sensors
+ * package 2.7.0 for details)
+ *
+ * The SMBus PCI Device can be activated by setting a bit in the ICH LPC
+ * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
+ * becomes necessary to do this tweak in two steps -- the chosen trigger
+ * is either the Host bridge (preferred) or on-board VGA controller.
+ *
+ * Note that we used to unhide the SMBus that way on Toshiba laptops
+ * (Satellite A40 and Tecra M2) but then found that the thermal management
+ * was done by SMM code, which could cause unsynchronized concurrent
+ * accesses to the SMBus registers, with potentially bad effects. Thus you
+ * should be very careful when adding new entries: if SMM is accessing the
+ * Intel SMBus, this is a very good reason to leave it hidden.
+ *
+ * Likewise, many recent laptops use ACPI for thermal management. If the
+ * ACPI DSDT code accesses the SMBus, then Linux should not access it
+ * natively, and keeping the SMBus hidden is the right thing to do. If you
+ * are about to add an entry in the table below, please first disassemble
+ * the DSDT and double-check that there is no code accessing the SMBus.
+ */
+static int asus_hides_smbus;
+
+static void asus_hides_smbus_hostbridge(struct pci_dev *dev)
+{
+ if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
+ switch (dev->subsystem_device) {
+ case 0x8025: /* P4B-LX */
+ case 0x8070: /* P4B */
+ case 0x8088: /* P4B533 */
+ case 0x1626: /* L3C notebook */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB)
+ switch (dev->subsystem_device) {
+ case 0x80b1: /* P4GE-V */
+ case 0x80b2: /* P4PE */
+ case 0x8093: /* P4B533-V */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB)
+ switch (dev->subsystem_device) {
+ case 0x8030: /* P4T533 */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0)
+ switch (dev->subsystem_device) {
+ case 0x8070: /* P4G8X Deluxe */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH)
+ switch (dev->subsystem_device) {
+ case 0x80c9: /* PU-DLS */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
+ switch (dev->subsystem_device) {
+ case 0x1751: /* M2N notebook */
+ case 0x1821: /* M5N notebook */
+ case 0x1897: /* A6L notebook */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch (dev->subsystem_device) {
+ case 0x184b: /* W1N notebook */
+ case 0x186a: /* M6Ne notebook */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
+ switch (dev->subsystem_device) {
+ case 0x80f2: /* P4P800-X */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
+ switch (dev->subsystem_device) {
+ case 0x1882: /* M6V notebook */
+ case 0x1977: /* A6VA notebook */
+ asus_hides_smbus = 1;
+ }
+ } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch (dev->subsystem_device) {
+ case 0x088C: /* HP Compaq nc8000 */
+ case 0x0890: /* HP Compaq nc6000 */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
+ switch (dev->subsystem_device) {
+ case 0x12bc: /* HP D330L */
+ case 0x12bd: /* HP D530 */
+ case 0x006a: /* HP Compaq nx9500 */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB)
+ switch (dev->subsystem_device) {
+ case 0x12bf: /* HP xw4100 */
+ asus_hides_smbus = 1;
+ }
+ } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch (dev->subsystem_device) {
+ case 0xC00C: /* Samsung P35 notebook */
+ asus_hides_smbus = 1;
+ }
+ } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch (dev->subsystem_device) {
+ case 0x0058: /* Compaq Evo N620c */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3)
+ switch (dev->subsystem_device) {
+ case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */
+ /* Motherboard doesn't have Host bridge
+ * subvendor/subdevice IDs, therefore checking
+ * its on-board VGA controller */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2)
+ switch (dev->subsystem_device) {
+ case 0x00b8: /* Compaq Evo D510 CMT */
+ case 0x00b9: /* Compaq Evo D510 SFF */
+ case 0x00ba: /* Compaq Evo D510 USDT */
+ /* Motherboard doesn't have Host bridge
+ * subvendor/subdevice IDs and on-board VGA
+ * controller is disabled if an AGP card is
+ * inserted, therefore checking USB UHCI
+ * Controller #1 */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC)
+ switch (dev->subsystem_device) {
+ case 0x001A: /* Compaq Deskpro EN SSF P667 815E */
+ /* Motherboard doesn't have host bridge
+ * subvendor/subdevice IDs, therefore checking
+ * its on-board VGA controller */
+ asus_hides_smbus = 1;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge);
+
+static void asus_hides_smbus_lpc(struct pci_dev *dev)
+{
+ u16 val;
+
+ if (likely(!asus_hides_smbus))
+ return;
+
+ pci_read_config_word(dev, 0xF2, &val);
+ if (val & 0x8) {
+ pci_write_config_word(dev, 0xF2, val & (~0x8));
+ pci_read_config_word(dev, 0xF2, &val);
+ if (val & 0x8)
+ pci_info(dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n",
+ val);
+ else
+ pci_info(dev, "Enabled i801 SMBus device\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
+
+/* It appears we just have one such device. If not, we have a warning */
+static void __iomem *asus_rcba_base;
+static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev)
+{
+ u32 rcba;
+
+ if (likely(!asus_hides_smbus))
+ return;
+ WARN_ON(asus_rcba_base);
+
+ pci_read_config_dword(dev, 0xF0, &rcba);
+ /* use bits 31:14, 16 kB aligned */
+ asus_rcba_base = ioremap(rcba & 0xFFFFC000, 0x4000);
+ if (asus_rcba_base == NULL)
+ return;
+}
+
+static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev)
+{
+ u32 val;
+
+ if (likely(!asus_hides_smbus || !asus_rcba_base))
+ return;
+
+ /* read the Function Disable register, dword mode only */
+ val = readl(asus_rcba_base + 0x3418);
+
+ /* enable the SMBus device */
+ writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418);
+}
+
+static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev)
+{
+ if (likely(!asus_hides_smbus || !asus_rcba_base))
+ return;
+
+ iounmap(asus_rcba_base);
+ asus_rcba_base = NULL;
+ pci_info(dev, "Enabled ICH6/i801 SMBus device\n");
+}
+
+static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+{
+ asus_hides_smbus_lpc_ich6_suspend(dev);
+ asus_hides_smbus_lpc_ich6_resume_early(dev);
+ asus_hides_smbus_lpc_ich6_resume(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6);
+DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early);
+
+/* SiS 96x south bridge: BIOS typically hides SMBus device... */
+static void quirk_sis_96x_smbus(struct pci_dev *dev)
+{
+ u8 val = 0;
+ pci_read_config_byte(dev, 0x77, &val);
+ if (val & 0x10) {
+ pci_info(dev, "Enabling SiS 96x SMBus\n");
+ pci_write_config_byte(dev, 0x77, val & ~0x10);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
+
+/*
+ * ... This is further complicated by the fact that some SiS96x south
+ * bridges pretend to be 85C503/5513 instead. In that case see if we
+ * spotted a compatible north bridge to make sure.
+ * (pci_find_device() doesn't work yet)
+ *
+ * We can also enable the sis96x bit in the discovery register..
+ */
+#define SIS_DETECT_REGISTER 0x40
+
+static void quirk_sis_503(struct pci_dev *dev)
+{
+ u8 reg;
+ u16 devid;
+
+ pci_read_config_byte(dev, SIS_DETECT_REGISTER, &reg);
+ pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6));
+ pci_read_config_word(dev, PCI_DEVICE_ID, &devid);
+ if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) {
+ pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg);
+ return;
+ }
+
+ /*
+ * Ok, it now shows up as a 96x. Run the 96x quirk by hand in case
+ * it has already been processed. (Depends on link order, which is
+ * apparently not guaranteed)
+ */
+ dev->device = devid;
+ quirk_sis_96x_smbus(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
+
+/*
+ * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
+ * and MC97 modem controller are disabled when a second PCI soundcard is
+ * present. This patch, tweaking the VT8237 ISA bridge, enables them.
+ * -- bjd
+ */
+static void asus_hides_ac97_lpc(struct pci_dev *dev)
+{
+ u8 val;
+ int asus_hides_ac97 = 0;
+
+ if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
+ if (dev->device == PCI_DEVICE_ID_VIA_8237)
+ asus_hides_ac97 = 1;
+ }
+
+ if (!asus_hides_ac97)
+ return;
+
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val & 0xc0) {
+ pci_write_config_byte(dev, 0x50, val & (~0xc0));
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val & 0xc0)
+ pci_info(dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n",
+ val);
+ else
+ pci_info(dev, "Enabled onboard AC97/MC97 devices\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
+
+#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
+
+/*
+ * If we are using libata we can drive this chip properly but must do this
+ * early on to make the additional device appear during the PCI scanning.
+ */
+static void quirk_jmicron_ata(struct pci_dev *pdev)
+{
+ u32 conf1, conf5, class;
+ u8 hdr;
+
+ /* Only poke fn 0 */
+ if (PCI_FUNC(pdev->devfn))
+ return;
+
+ pci_read_config_dword(pdev, 0x40, &conf1);
+ pci_read_config_dword(pdev, 0x80, &conf5);
+
+ conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */
+ conf5 &= ~(1 << 24); /* Clear bit 24 */
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
+ case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
+ case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */
+ /* The controller should be in single function ahci mode */
+ conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
+ break;
+
+ case PCI_DEVICE_ID_JMICRON_JMB365:
+ case PCI_DEVICE_ID_JMICRON_JMB366:
+ /* Redirect IDE second PATA port to the right spot */
+ conf5 |= (1 << 24);
+ fallthrough;
+ case PCI_DEVICE_ID_JMICRON_JMB361:
+ case PCI_DEVICE_ID_JMICRON_JMB363:
+ case PCI_DEVICE_ID_JMICRON_JMB369:
+ /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
+ /* Set the class codes correctly and then direct IDE 0 */
+ conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */
+ break;
+
+ case PCI_DEVICE_ID_JMICRON_JMB368:
+ /* The controller should be in single function IDE mode */
+ conf1 |= 0x00C00000; /* Set 22, 23 */
+ break;
+ }
+
+ pci_write_config_dword(pdev, 0x40, conf1);
+ pci_write_config_dword(pdev, 0x80, conf5);
+
+ /* Update pdev accordingly */
+ pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
+ pdev->hdr_type = hdr & 0x7f;
+ pdev->multifunction = !!(hdr & 0x80);
+
+ pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class);
+ pdev->class = class >> 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
+
+#endif
+
+static void quirk_jmicron_async_suspend(struct pci_dev *dev)
+{
+ if (dev->multifunction) {
+ device_disable_async_suspend(&dev->dev);
+ pci_info(dev, "async suspend disabled to avoid multi-function power-on ordering issue\n");
+ }
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend);
+
+#ifdef CONFIG_X86_IO_APIC
+static void quirk_alder_ioapic(struct pci_dev *pdev)
+{
+ int i;
+
+ if ((pdev->class >> 8) != 0xff00)
+ return;
+
+ /*
+ * The first BAR is the location of the IO-APIC... we must
+ * not touch this (and it's already covered by the fixmap), so
+ * forcibly insert it into the resource tree.
+ */
+ if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0))
+ insert_resource(&iomem_resource, &pdev->resource[0]);
+
+ /*
+ * The next five BARs all seem to be rubbish, so just clean
+ * them out.
+ */
+ for (i = 1; i < PCI_STD_NUM_BARS; i++)
+ memset(&pdev->resource[i], 0, sizeof(pdev->resource[i]));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic);
+#endif
+
+static void quirk_no_msi(struct pci_dev *dev)
+{
+ pci_info(dev, "avoiding MSI to work around a hardware defect\n");
+ dev->no_msi = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4386, quirk_no_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4387, quirk_no_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4388, quirk_no_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4389, quirk_no_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x438a, quirk_no_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x438b, quirk_no_msi);
+
+static void quirk_pcie_mch(struct pci_dev *pdev)
+{
+ pdev->no_msi = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch);
+
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, PCI_CLASS_BRIDGE_PCI, 8, quirk_pcie_mch);
+
+/*
+ * HiSilicon KunPeng920 and KunPeng930 have devices appear as PCI but are
+ * actually on the AMBA bus. These fake PCI devices can support SVA via
+ * SMMU stall feature, by setting dma-can-stall for ACPI platforms.
+ *
+ * Normally stalling must not be enabled for PCI devices, since it would
+ * break the PCI requirement for free-flowing writes and may lead to
+ * deadlock. We expect PCI devices to support ATS and PRI if they want to
+ * be fault-tolerant, so there's no ACPI binding to describe anything else,
+ * even when a "PCI" device turns out to be a regular old SoC device
+ * dressed up as a RCiEP and normal rules don't apply.
+ */
+static void quirk_huawei_pcie_sva(struct pci_dev *pdev)
+{
+ struct property_entry properties[] = {
+ PROPERTY_ENTRY_BOOL("dma-can-stall"),
+ {},
+ };
+
+ if (pdev->revision != 0x21 && pdev->revision != 0x30)
+ return;
+
+ pdev->pasid_no_tlp = 1;
+
+ /*
+ * Set the dma-can-stall property on ACPI platforms. Device tree
+ * can set it directly.
+ */
+ if (!pdev->dev.of_node &&
+ device_create_managed_software_node(&pdev->dev, properties, NULL))
+ pci_warn(pdev, "could not add stall property");
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa250, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa251, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
+
+/*
+ * It's possible for the MSI to get corrupted if SHPC and ACPI are used
+ * together on certain PXH-based systems.
+ */
+static void quirk_pcie_pxh(struct pci_dev *dev)
+{
+ dev->no_msi = 1;
+ pci_warn(dev, "PXH quirk detected; SHPC device MSI disabled\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
+
+/*
+ * Some Intel PCI Express chipsets have trouble with downstream device
+ * power management.
+ */
+static void quirk_intel_pcie_pm(struct pci_dev *dev)
+{
+ pci_pm_d3hot_delay = 120;
+ dev->no_d1d2 = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
+
+static void quirk_d3hot_delay(struct pci_dev *dev, unsigned int delay)
+{
+ if (dev->d3hot_delay >= delay)
+ return;
+
+ dev->d3hot_delay = delay;
+ pci_info(dev, "extending delay after power-on from D3hot to %d msec\n",
+ dev->d3hot_delay);
+}
+
+static void quirk_radeon_pm(struct pci_dev *dev)
+{
+ if (dev->subsystem_vendor == PCI_VENDOR_ID_APPLE &&
+ dev->subsystem_device == 0x00e2)
+ quirk_d3hot_delay(dev, 20);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm);
+
+/*
+ * NVIDIA Ampere-based HDA controllers can wedge the whole device if a bus
+ * reset is performed too soon after transition to D0, extend d3hot_delay
+ * to previous effective default for all NVIDIA HDA controllers.
+ */
+static void quirk_nvidia_hda_pm(struct pci_dev *dev)
+{
+ quirk_d3hot_delay(dev, 20);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8,
+ quirk_nvidia_hda_pm);
+
+/*
+ * Ryzen5/7 XHCI controllers fail upon resume from runtime suspend or s2idle.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=205587
+ *
+ * The kernel attempts to transition these devices to D3cold, but that seems
+ * to be ineffective on the platforms in question; the PCI device appears to
+ * remain on in D3hot state. The D3hot-to-D0 transition then requires an
+ * extended delay in order to succeed.
+ */
+static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev)
+{
+ quirk_d3hot_delay(dev, 20);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1639, quirk_ryzen_xhci_d3hot);
+
+#ifdef CONFIG_X86_IO_APIC
+static int dmi_disable_ioapicreroute(const struct dmi_system_id *d)
+{
+ noioapicreroute = 1;
+ pr_info("%s detected: disable boot interrupt reroute\n", d->ident);
+
+ return 0;
+}
+
+static const struct dmi_system_id boot_interrupt_dmi_table[] = {
+ /*
+ * Systems to exclude from boot interrupt reroute quirks
+ */
+ {
+ .callback = dmi_disable_ioapicreroute,
+ .ident = "ASUSTek Computer INC. M2N-LR",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M2N-LR"),
+ },
+ },
+ {}
+};
+
+/*
+ * Boot interrupts on some chipsets cannot be turned off. For these chipsets,
+ * remap the original interrupt in the Linux kernel to the boot interrupt, so
+ * that a PCI device's interrupt handler is installed on the boot interrupt
+ * line instead.
+ */
+static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev)
+{
+ dmi_check_system(boot_interrupt_dmi_table);
+ if (noioapicquirk || noioapicreroute)
+ return;
+
+ dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT;
+ pci_info(dev, "rerouting interrupts for [%04x:%04x]\n",
+ dev->vendor, dev->device);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
+
+/*
+ * On some chipsets we can disable the generation of legacy INTx boot
+ * interrupts.
+ */
+
+/*
+ * IO-APIC1 on 6300ESB generates boot interrupts, see Intel order no
+ * 300641-004US, section 5.7.3.
+ *
+ * Core IO on Xeon E5 1600/2600/4600, see Intel order no 326509-003.
+ * Core IO on Xeon E5 v2, see Intel order no 329188-003.
+ * Core IO on Xeon E7 v2, see Intel order no 329595-002.
+ * Core IO on Xeon E5 v3, see Intel order no 330784-003.
+ * Core IO on Xeon E7 v3, see Intel order no 332315-001US.
+ * Core IO on Xeon E5 v4, see Intel order no 333810-002US.
+ * Core IO on Xeon E7 v4, see Intel order no 332315-001US.
+ * Core IO on Xeon D-1500, see Intel order no 332051-001.
+ * Core IO on Xeon Scalable, see Intel order no 610950.
+ */
+#define INTEL_6300_IOAPIC_ABAR 0x40 /* Bus 0, Dev 29, Func 5 */
+#define INTEL_6300_DISABLE_BOOT_IRQ (1<<14)
+
+#define INTEL_CIPINTRC_CFG_OFFSET 0x14C /* Bus 0, Dev 5, Func 0 */
+#define INTEL_CIPINTRC_DIS_INTX_ICH (1<<25)
+
+static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev)
+{
+ u16 pci_config_word;
+ u32 pci_config_dword;
+
+ if (noioapicquirk)
+ return;
+
+ switch (dev->device) {
+ case PCI_DEVICE_ID_INTEL_ESB_10:
+ pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR,
+ &pci_config_word);
+ pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ;
+ pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR,
+ pci_config_word);
+ break;
+ case 0x3c28: /* Xeon E5 1600/2600/4600 */
+ case 0x0e28: /* Xeon E5/E7 V2 */
+ case 0x2f28: /* Xeon E5/E7 V3,V4 */
+ case 0x6f28: /* Xeon D-1500 */
+ case 0x2034: /* Xeon Scalable Family */
+ pci_read_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET,
+ &pci_config_dword);
+ pci_config_dword |= INTEL_CIPINTRC_DIS_INTX_ICH;
+ pci_write_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET,
+ pci_config_dword);
+ break;
+ default:
+ return;
+ }
+ pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
+}
+/*
+ * Device 29 Func 5 Device IDs of IO-APIC
+ * containing ABAR—APIC1 Alternate Base Address Register
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10,
+ quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10,
+ quirk_disable_intel_boot_interrupt);
+
+/*
+ * Device 5 Func 0 Device IDs of Core IO modules/hubs
+ * containing Coherent Interface Protocol Interrupt Control
+ *
+ * Device IDs obtained from volume 2 datasheets of commented
+ * families above.
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x3c28,
+ quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0e28,
+ quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2f28,
+ quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x6f28,
+ quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2034,
+ quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x3c28,
+ quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x0e28,
+ quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x2f28,
+ quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x6f28,
+ quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x2034,
+ quirk_disable_intel_boot_interrupt);
+
+/* Disable boot interrupts on HT-1000 */
+#define BC_HT1000_FEATURE_REG 0x64
+#define BC_HT1000_PIC_REGS_ENABLE (1<<0)
+#define BC_HT1000_MAP_IDX 0xC00
+#define BC_HT1000_MAP_DATA 0xC01
+
+static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev)
+{
+ u32 pci_config_dword;
+ u8 irq;
+
+ if (noioapicquirk)
+ return;
+
+ pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword);
+ pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword |
+ BC_HT1000_PIC_REGS_ENABLE);
+
+ for (irq = 0x10; irq < 0x10 + 32; irq++) {
+ outb(irq, BC_HT1000_MAP_IDX);
+ outb(0x00, BC_HT1000_MAP_DATA);
+ }
+
+ pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword);
+
+ pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
+
+/* Disable boot interrupts on AMD and ATI chipsets */
+
+/*
+ * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131
+ * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode
+ * (due to an erratum).
+ */
+#define AMD_813X_MISC 0x40
+#define AMD_813X_NOIOAMODE (1<<0)
+#define AMD_813X_REV_B1 0x12
+#define AMD_813X_REV_B2 0x13
+
+static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
+{
+ u32 pci_config_dword;
+
+ if (noioapicquirk)
+ return;
+ if ((dev->revision == AMD_813X_REV_B1) ||
+ (dev->revision == AMD_813X_REV_B2))
+ return;
+
+ pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
+ pci_config_dword &= ~AMD_813X_NOIOAMODE;
+ pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword);
+
+ pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+
+#define AMD_8111_PCI_IRQ_ROUTING 0x56
+
+static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev)
+{
+ u16 pci_config_word;
+
+ if (noioapicquirk)
+ return;
+
+ pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word);
+ if (!pci_config_word) {
+ pci_info(dev, "boot interrupts on device [%04x:%04x] already disabled\n",
+ dev->vendor, dev->device);
+ return;
+ }
+ pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0);
+ pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
+#endif /* CONFIG_X86_IO_APIC */
+
+/*
+ * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
+ * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
+ * Re-allocate the region if needed...
+ */
+static void quirk_tc86c001_ide(struct pci_dev *dev)
+{
+ struct resource *r = &dev->resource[0];
+
+ if (r->start & 0x8) {
+ r->flags |= IORESOURCE_UNSET;
+ r->start = 0;
+ r->end = 0xf;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
+ PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
+ quirk_tc86c001_ide);
+
+/*
+ * PLX PCI 9050 PCI Target bridge controller has an erratum that prevents the
+ * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o)
+ * being read correctly if bit 7 of the base address is set.
+ * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128).
+ * Re-allocate the regions to a 256-byte boundary if necessary.
+ */
+static void quirk_plx_pci9050(struct pci_dev *dev)
+{
+ unsigned int bar;
+
+ /* Fixed in revision 2 (PCI 9052). */
+ if (dev->revision >= 2)
+ return;
+ for (bar = 0; bar <= 1; bar++)
+ if (pci_resource_len(dev, bar) == 0x80 &&
+ (pci_resource_start(dev, bar) & 0x80)) {
+ struct resource *r = &dev->resource[bar];
+ pci_info(dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n",
+ bar);
+ r->flags |= IORESOURCE_UNSET;
+ r->start = 0;
+ r->end = 0xff;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ quirk_plx_pci9050);
+/*
+ * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others)
+ * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b,
+ * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c,
+ * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b.
+ *
+ * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq"
+ * driver.
+ */
+DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050);
+DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050);
+
+static void quirk_netmos(struct pci_dev *dev)
+{
+ unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
+ unsigned int num_serial = dev->subsystem_device & 0xf;
+
+ /*
+ * These Netmos parts are multiport serial devices with optional
+ * parallel ports. Even when parallel ports are present, they
+ * are identified as class SERIAL, which means the serial driver
+ * will claim them. To prevent this, mark them as class OTHER.
+ * These combo devices should be claimed by parport_serial.
+ *
+ * The subdevice ID is of the form 0x00PS, where <P> is the number
+ * of parallel ports and <S> is the number of serial ports.
+ */
+ switch (dev->device) {
+ case PCI_DEVICE_ID_NETMOS_9835:
+ /* Well, this rule doesn't hold for the following 9835 device */
+ if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+ dev->subsystem_device == 0x0299)
+ return;
+ fallthrough;
+ case PCI_DEVICE_ID_NETMOS_9735:
+ case PCI_DEVICE_ID_NETMOS_9745:
+ case PCI_DEVICE_ID_NETMOS_9845:
+ case PCI_DEVICE_ID_NETMOS_9855:
+ if (num_parallel) {
+ pci_info(dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n",
+ dev->device, num_parallel, num_serial);
+ dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) |
+ (dev->class & 0xff);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos);
+
+static void quirk_e100_interrupt(struct pci_dev *dev)
+{
+ u16 command, pmcsr;
+ u8 __iomem *csr;
+ u8 cmd_hi;
+
+ switch (dev->device) {
+ /* PCI IDs taken from drivers/net/e100.c */
+ case 0x1029:
+ case 0x1030 ... 0x1034:
+ case 0x1038 ... 0x103E:
+ case 0x1050 ... 0x1057:
+ case 0x1059:
+ case 0x1064 ... 0x106B:
+ case 0x1091 ... 0x1095:
+ case 0x1209:
+ case 0x1229:
+ case 0x2449:
+ case 0x2459:
+ case 0x245D:
+ case 0x27DC:
+ break;
+ default:
+ return;
+ }
+
+ /*
+ * Some firmware hands off the e100 with interrupts enabled,
+ * which can cause a flood of interrupts if packets are
+ * received before the driver attaches to the device. So
+ * disable all e100 interrupts here. The driver will
+ * re-enable them when it's ready.
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+
+ if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0))
+ return;
+
+ /*
+ * Check that the device is in the D0 power state. If it's not,
+ * there is no point to look any further.
+ */
+ if (dev->pm_cap) {
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
+ return;
+ }
+
+ /* Convert from PCI bus to resource space. */
+ csr = ioremap(pci_resource_start(dev, 0), 8);
+ if (!csr) {
+ pci_warn(dev, "Can't map e100 registers\n");
+ return;
+ }
+
+ cmd_hi = readb(csr + 3);
+ if (cmd_hi == 0) {
+ pci_warn(dev, "Firmware left e100 interrupts enabled; disabling\n");
+ writeb(1, csr + 3);
+ }
+
+ iounmap(csr);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt);
+
+/*
+ * The 82575 and 82598 may experience data corruption issues when transitioning
+ * out of L0S. To prevent this we need to disable L0S on the PCIe link.
+ */
+static void quirk_disable_aspm_l0s(struct pci_dev *dev)
+{
+ pci_info(dev, "Disabling L0s\n");
+ pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
+
+static void quirk_disable_aspm_l0s_l1(struct pci_dev *dev)
+{
+ pci_info(dev, "Disabling ASPM L0s/L1\n");
+ pci_disable_link_state(dev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
+}
+
+/*
+ * ASM1083/1085 PCIe-PCI bridge devices cause AER timeout errors on the
+ * upstream PCIe root port when ASPM is enabled. At least L0s mode is affected;
+ * disable both L0s and L1 for now to be safe.
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x1080, quirk_disable_aspm_l0s_l1);
+
+/*
+ * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain
+ * Link bit cleared after starting the link retrain process to allow this
+ * process to finish.
+ *
+ * Affected devices: PI7C9X110, PI7C9X111SL, PI7C9X130. See also the
+ * Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf.
+ */
+static void quirk_enable_clear_retrain_link(struct pci_dev *dev)
+{
+ dev->clear_retrain_link = 1;
+ pci_info(dev, "Enable PCIe Retrain Link quirk\n");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PERICOM, 0xe110, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PERICOM, 0xe111, quirk_enable_clear_retrain_link);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PERICOM, 0xe130, quirk_enable_clear_retrain_link);
+
+static void fixup_rev1_53c810(struct pci_dev *dev)
+{
+ u32 class = dev->class;
+
+ /*
+ * rev 1 ncr53c810 chips don't set the class at all which means
+ * they don't get their resources remapped. Fix that here.
+ */
+ if (class)
+ return;
+
+ dev->class = PCI_CLASS_STORAGE_SCSI << 8;
+ pci_info(dev, "NCR 53c810 rev 1 PCI class overridden (%#08x -> %#08x)\n",
+ class, dev->class);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
+
+/* Enable 1k I/O space granularity on the Intel P64H2 */
+static void quirk_p64h2_1k_io(struct pci_dev *dev)
+{
+ u16 en1k;
+
+ pci_read_config_word(dev, 0x40, &en1k);
+
+ if (en1k & 0x200) {
+ pci_info(dev, "Enable I/O Space to 1KB granularity\n");
+ dev->io_window_1k = 1;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
+
+/*
+ * Under some circumstances, AER is not linked with extended capabilities.
+ * Force it to be linked by setting the corresponding control bit in the
+ * config space.
+ */
+static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
+{
+ uint8_t b;
+
+ if (pci_read_config_byte(dev, 0xf41, &b) == 0) {
+ if (!(b & 0x20)) {
+ pci_write_config_byte(dev, 0xf41, b | 0x20);
+ pci_info(dev, "Linking AER extended capability\n");
+ }
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+ quirk_nvidia_ck804_pcie_aer_ext_cap);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+ quirk_nvidia_ck804_pcie_aer_ext_cap);
+
+static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
+{
+ /*
+ * Disable PCI Bus Parking and PCI Master read caching on CX700
+ * which causes unspecified timing errors with a VT6212L on the PCI
+ * bus leading to USB2.0 packet loss.
+ *
+ * This quirk is only enabled if a second (on the external PCI bus)
+ * VT6212L is found -- the CX700 core itself also contains a USB
+ * host controller with the same PCI ID as the VT6212L.
+ */
+
+ /* Count VT6212L instances */
+ struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_8235_USB_2, NULL);
+ uint8_t b;
+
+ /*
+ * p should contain the first (internal) VT6212L -- see if we have
+ * an external one by searching again.
+ */
+ p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p);
+ if (!p)
+ return;
+ pci_dev_put(p);
+
+ if (pci_read_config_byte(dev, 0x76, &b) == 0) {
+ if (b & 0x40) {
+ /* Turn off PCI Bus Parking */
+ pci_write_config_byte(dev, 0x76, b ^ 0x40);
+
+ pci_info(dev, "Disabling VIA CX700 PCI parking\n");
+ }
+ }
+
+ if (pci_read_config_byte(dev, 0x72, &b) == 0) {
+ if (b != 0) {
+ /* Turn off PCI Master read caching */
+ pci_write_config_byte(dev, 0x72, 0x0);
+
+ /* Set PCI Master Bus time-out to "1x16 PCLK" */
+ pci_write_config_byte(dev, 0x75, 0x1);
+
+ /* Disable "Read FIFO Timer" */
+ pci_write_config_byte(dev, 0x77, 0x0);
+
+ pci_info(dev, "Disabling VIA CX700 PCI caching\n");
+ }
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
+
+static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev)
+{
+ u32 rev;
+
+ pci_read_config_dword(dev, 0xf4, &rev);
+
+ /* Only CAP the MRRS if the device is a 5719 A0 */
+ if (rev == 0x05719000) {
+ int readrq = pcie_get_readrq(dev);
+ if (readrq > 2048)
+ pcie_set_readrq(dev, 2048);
+ }
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5719,
+ quirk_brcm_5719_limit_mrrs);
+
+/*
+ * Originally in EDAC sources for i82875P: Intel tells BIOS developers to
+ * hide device 6 which configures the overflow device access containing the
+ * DRBs - this is where we expose device 6.
+ * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
+ */
+static void quirk_unhide_mch_dev6(struct pci_dev *dev)
+{
+ u8 reg;
+
+ if (pci_read_config_byte(dev, 0xF4, &reg) == 0 && !(reg & 0x02)) {
+ pci_info(dev, "Enabling MCH 'Overflow' Device\n");
+ pci_write_config_byte(dev, 0xF4, reg | 0x02);
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
+ quirk_unhide_mch_dev6);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
+ quirk_unhide_mch_dev6);
+
+#ifdef CONFIG_PCI_MSI
+/*
+ * Some chipsets do not support MSI. We cannot easily rely on setting
+ * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually some
+ * other buses controlled by the chipset even if Linux is not aware of it.
+ * Instead of setting the flag on all buses in the machine, simply disable
+ * MSI globally.
+ */
+static void quirk_disable_all_msi(struct pci_dev *dev)
+{
+ pci_no_msi();
+ pci_warn(dev, "MSI quirk detected; MSI disabled\n");
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SAMSUNG, 0xa5e3, quirk_disable_all_msi);
+
+/* Disable MSI on chipsets that are known to not support it */
+static void quirk_disable_msi(struct pci_dev *dev)
+{
+ if (dev->subordinate) {
+ pci_warn(dev, "MSI quirk detected; subordinate MSI disabled\n");
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi);
+
+/*
+ * The APC bridge device in AMD 780 family northbridges has some random
+ * OEM subsystem ID in its vendor ID register (erratum 18), so instead
+ * we use the possible vendor/device IDs of the host bridge for the
+ * declared quirk, and search for the APC bridge by slot number.
+ */
+static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge)
+{
+ struct pci_dev *apc_bridge;
+
+ apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0));
+ if (apc_bridge) {
+ if (apc_bridge->device == 0x9602)
+ quirk_disable_msi(apc_bridge);
+ pci_dev_put(apc_bridge);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi);
+
+/*
+ * Go through the list of HyperTransport capabilities and return 1 if a HT
+ * MSI capability is found and enabled.
+ */
+static int msi_ht_cap_enabled(struct pci_dev *dev)
+{
+ int pos, ttl = PCI_FIND_CAP_TTL;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ pci_info(dev, "Found %s HT MSI Mapping\n",
+ flags & HT_MSI_FLAGS_ENABLE ?
+ "enabled" : "disabled");
+ return (flags & HT_MSI_FLAGS_ENABLE) != 0;
+ }
+
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+ return 0;
+}
+
+/* Check the HyperTransport MSI mapping to know whether MSI is enabled or not */
+static void quirk_msi_ht_cap(struct pci_dev *dev)
+{
+ if (!msi_ht_cap_enabled(dev))
+ quirk_disable_msi(dev);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
+ quirk_msi_ht_cap);
+
+/*
+ * The nVidia CK804 chipset may have 2 HT MSI mappings. MSI is supported
+ * if the MSI capability is set in any of these mappings.
+ */
+static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
+{
+ struct pci_dev *pdev;
+
+ /*
+ * Check HT MSI cap on this chipset and the root one. A single one
+ * having MSI is enough to be sure that MSI is supported.
+ */
+ pdev = pci_get_slot(dev->bus, 0);
+ if (!pdev)
+ return;
+ if (!msi_ht_cap_enabled(pdev))
+ quirk_msi_ht_cap(dev);
+ pci_dev_put(pdev);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+ quirk_nvidia_ck804_msi_ht_cap);
+
+/* Force enable MSI mapping capability on HT bridges */
+static void ht_enable_msi_mapping(struct pci_dev *dev)
+{
+ int pos, ttl = PCI_FIND_CAP_TTL;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ pci_info(dev, "Enabling HT MSI Mapping\n");
+
+ pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
+ flags | HT_MSI_FLAGS_ENABLE);
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
+ ht_enable_msi_mapping);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
+ ht_enable_msi_mapping);
+
+/*
+ * The P5N32-SLI motherboards from Asus have a problem with MSI
+ * for the MCP55 NIC. It is not yet determined whether the MSI problem
+ * also affects other devices. As for now, turn off MSI for this device.
+ */
+static void nvenet_msi_disable(struct pci_dev *dev)
+{
+ const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+ if (board_name &&
+ (strstr(board_name, "P5N32-SLI PREMIUM") ||
+ strstr(board_name, "P5N32-E SLI"))) {
+ pci_info(dev, "Disabling MSI for MCP55 NIC on P5N32-SLI\n");
+ dev->no_msi = 1;
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
+ PCI_DEVICE_ID_NVIDIA_NVENET_15,
+ nvenet_msi_disable);
+
+/*
+ * PCIe spec r6.0 sec 6.1.4.3 says that if MSI/MSI-X is enabled, the device
+ * can't use INTx interrupts. Tegra's PCIe Root Ports don't generate MSI
+ * interrupts for PME and AER events; instead only INTx interrupts are
+ * generated. Though Tegra's PCIe Root Ports can generate MSI interrupts
+ * for other events, since PCIe specification doesn't support using a mix of
+ * INTx and MSI/MSI-X, it is required to disable MSI interrupts to avoid port
+ * service drivers registering their respective ISRs for MSIs.
+ */
+static void pci_quirk_nvidia_tegra_disable_rp_msi(struct pci_dev *dev)
+{
+ dev->no_msi = 1;
+}
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad0,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad1,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad2,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1c,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1d,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e12,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e13,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0fae,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0faf,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x10e5,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x10e6,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x229a,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x229c,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x229e,
+ PCI_CLASS_BRIDGE_PCI, 8,
+ pci_quirk_nvidia_tegra_disable_rp_msi);
+
+/*
+ * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing
+ * config register. This register controls the routing of legacy
+ * interrupts from devices that route through the MCP55. If this register
+ * is misprogrammed, interrupts are only sent to the BSP, unlike
+ * conventional systems where the IRQ is broadcast to all online CPUs. Not
+ * having this register set properly prevents kdump from booting up
+ * properly, so let's make sure that we have it set correctly.
+ * Note that this is an undocumented register.
+ */
+static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
+{
+ u32 cfg;
+
+ if (!pci_find_capability(dev, PCI_CAP_ID_HT))
+ return;
+
+ pci_read_config_dword(dev, 0x74, &cfg);
+
+ if (cfg & ((1 << 2) | (1 << 15))) {
+ pr_info("Rewriting IRQ routing register on MCP55\n");
+ cfg &= ~((1 << 2) | (1 << 15));
+ pci_write_config_dword(dev, 0x74, cfg);
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
+ PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0,
+ nvbridge_check_legacy_irq_routing);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
+ PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4,
+ nvbridge_check_legacy_irq_routing);
+
+static int ht_check_msi_mapping(struct pci_dev *dev)
+{
+ int pos, ttl = PCI_FIND_CAP_TTL;
+ int found = 0;
+
+ /* Check if there is HT MSI cap or enabled on this device */
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (found < 1)
+ found = 1;
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ if (flags & HT_MSI_FLAGS_ENABLE) {
+ if (found < 2) {
+ found = 2;
+ break;
+ }
+ }
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+
+ return found;
+}
+
+static int host_bridge_with_leaf(struct pci_dev *host_bridge)
+{
+ struct pci_dev *dev;
+ int pos;
+ int i, dev_no;
+ int found = 0;
+
+ dev_no = host_bridge->devfn >> 3;
+ for (i = dev_no + 1; i < 0x20; i++) {
+ dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0));
+ if (!dev)
+ continue;
+
+ /* found next host bridge? */
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
+ if (pos != 0) {
+ pci_dev_put(dev);
+ break;
+ }
+
+ if (ht_check_msi_mapping(dev)) {
+ found = 1;
+ pci_dev_put(dev);
+ break;
+ }
+ pci_dev_put(dev);
+ }
+
+ return found;
+}
+
+#define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */
+#define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */
+
+static int is_end_of_ht_chain(struct pci_dev *dev)
+{
+ int pos, ctrl_off;
+ int end = 0;
+ u16 flags, ctrl;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
+
+ if (!pos)
+ goto out;
+
+ pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags);
+
+ ctrl_off = ((flags >> 10) & 1) ?
+ PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1;
+ pci_read_config_word(dev, pos + ctrl_off, &ctrl);
+
+ if (ctrl & (1 << 6))
+ end = 1;
+
+out:
+ return end;
+}
+
+static void nv_ht_enable_msi_mapping(struct pci_dev *dev)
+{
+ struct pci_dev *host_bridge;
+ int pos;
+ int i, dev_no;
+ int found = 0;
+
+ dev_no = dev->devfn >> 3;
+ for (i = dev_no; i >= 0; i--) {
+ host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0));
+ if (!host_bridge)
+ continue;
+
+ pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
+ if (pos != 0) {
+ found = 1;
+ break;
+ }
+ pci_dev_put(host_bridge);
+ }
+
+ if (!found)
+ return;
+
+ /* don't enable end_device/host_bridge with leaf directly here */
+ if (host_bridge == dev && is_end_of_ht_chain(host_bridge) &&
+ host_bridge_with_leaf(host_bridge))
+ goto out;
+
+ /* root did that ! */
+ if (msi_ht_cap_enabled(host_bridge))
+ goto out;
+
+ ht_enable_msi_mapping(dev);
+
+out:
+ pci_dev_put(host_bridge);
+}
+
+static void ht_disable_msi_mapping(struct pci_dev *dev)
+{
+ int pos, ttl = PCI_FIND_CAP_TTL;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ pci_info(dev, "Disabling HT MSI Mapping\n");
+
+ pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
+ flags & ~HT_MSI_FLAGS_ENABLE);
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+}
+
+static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
+{
+ struct pci_dev *host_bridge;
+ int pos;
+ int found;
+
+ if (!pci_msi_enabled())
+ return;
+
+ /* check if there is HT MSI cap or enabled on this device */
+ found = ht_check_msi_mapping(dev);
+
+ /* no HT MSI CAP */
+ if (found == 0)
+ return;
+
+ /*
+ * HT MSI mapping should be disabled on devices that are below
+ * a non-Hypertransport host bridge. Locate the host bridge...
+ */
+ host_bridge = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus), 0,
+ PCI_DEVFN(0, 0));
+ if (host_bridge == NULL) {
+ pci_warn(dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n");
+ return;
+ }
+
+ pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
+ if (pos != 0) {
+ /* Host bridge is to HT */
+ if (found == 1) {
+ /* it is not enabled, try to enable it */
+ if (all)
+ ht_enable_msi_mapping(dev);
+ else
+ nv_ht_enable_msi_mapping(dev);
+ }
+ goto out;
+ }
+
+ /* HT MSI is not enabled */
+ if (found == 1)
+ goto out;
+
+ /* Host bridge is not to HT, disable HT MSI mapping on this device */
+ ht_disable_msi_mapping(dev);
+
+out:
+ pci_dev_put(host_bridge);
+}
+
+static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev)
+{
+ return __nv_msi_ht_cap_quirk(dev, 1);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
+
+static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev)
+{
+ return __nv_msi_ht_cap_quirk(dev, 0);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
+
+static void quirk_msi_intx_disable_bug(struct pci_dev *dev)
+{
+ dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
+}
+
+static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev)
+{
+ struct pci_dev *p;
+
+ /*
+ * SB700 MSI issue will be fixed at HW level from revision A21;
+ * we need check PCI REVISION ID of SMBus controller to get SB700
+ * revision.
+ */
+ p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+ NULL);
+ if (!p)
+ return;
+
+ if ((p->revision < 0x3B) && (p->revision >= 0x30))
+ dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
+ pci_dev_put(p);
+}
+
+static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev)
+{
+ /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */
+ if (dev->revision < 0x18) {
+ pci_info(dev, "set MSI_INTX_DISABLE_BUG flag\n");
+ dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5780,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5780S,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5714,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5714S,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5715,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5715S,
+ quirk_msi_intx_disable_bug);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390,
+ quirk_msi_intx_disable_ati_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391,
+ quirk_msi_intx_disable_ati_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392,
+ quirk_msi_intx_disable_ati_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393,
+ quirk_msi_intx_disable_ati_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394,
+ quirk_msi_intx_disable_ati_bug);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375,
+ quirk_msi_intx_disable_bug);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090,
+ quirk_msi_intx_disable_qca_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091,
+ quirk_msi_intx_disable_qca_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0,
+ quirk_msi_intx_disable_qca_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1,
+ quirk_msi_intx_disable_qca_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091,
+ quirk_msi_intx_disable_qca_bug);
+
+/*
+ * Amazon's Annapurna Labs 1c36:0031 Root Ports don't support MSI-X, so it
+ * should be disabled on platforms where the device (mistakenly) advertises it.
+ *
+ * Notice that this quirk also disables MSI (which may work, but hasn't been
+ * tested), since currently there is no standard way to disable only MSI-X.
+ *
+ * The 0031 device id is reused for other non Root Port device types,
+ * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
+ */
+static void quirk_al_msi_disable(struct pci_dev *dev)
+{
+ dev->no_msi = 1;
+ pci_warn(dev, "Disabling MSI/MSI-X\n");
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
+ PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable);
+#endif /* CONFIG_PCI_MSI */
+
+/*
+ * Allow manual resource allocation for PCI hotplug bridges via
+ * pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For some PCI-PCI
+ * hotplug bridges, like PLX 6254 (former HINT HB6), kernel fails to
+ * allocate resources when hotplug device is inserted and PCI bus is
+ * rescanned.
+ */
+static void quirk_hotplug_bridge(struct pci_dev *dev)
+{
+ dev->is_hotplug_bridge = 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge);
+
+/*
+ * This is a quirk for the Ricoh MMC controller found as a part of some
+ * multifunction chips.
+ *
+ * This is very similar and based on the ricoh_mmc driver written by
+ * Philip Langdale. Thank you for these magic sequences.
+ *
+ * These chips implement the four main memory card controllers (SD, MMC,
+ * MS, xD) and one or both of CardBus or FireWire.
+ *
+ * It happens that they implement SD and MMC support as separate
+ * controllers (and PCI functions). The Linux SDHCI driver supports MMC
+ * cards but the chip detects MMC cards in hardware and directs them to the
+ * MMC controller - so the SDHCI driver never sees them.
+ *
+ * To get around this, we must disable the useless MMC controller. At that
+ * point, the SDHCI controller will start seeing them. It seems to be the
+ * case that the relevant PCI registers to deactivate the MMC controller
+ * live on PCI function 0, which might be the CardBus controller or the
+ * FireWire controller, depending on the particular chip in question
+ *
+ * This has to be done early, because as soon as we disable the MMC controller
+ * other PCI functions shift up one level, e.g. function #2 becomes function
+ * #1, and this will confuse the PCI core.
+ */
+#ifdef CONFIG_MMC_RICOH_MMC
+static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev)
+{
+ u8 write_enable;
+ u8 write_target;
+ u8 disable;
+
+ /*
+ * Disable via CardBus interface
+ *
+ * This must be done via function #0
+ */
+ if (PCI_FUNC(dev->devfn))
+ return;
+
+ pci_read_config_byte(dev, 0xB7, &disable);
+ if (disable & 0x02)
+ return;
+
+ pci_read_config_byte(dev, 0x8E, &write_enable);
+ pci_write_config_byte(dev, 0x8E, 0xAA);
+ pci_read_config_byte(dev, 0x8D, &write_target);
+ pci_write_config_byte(dev, 0x8D, 0xB7);
+ pci_write_config_byte(dev, 0xB7, disable | 0x02);
+ pci_write_config_byte(dev, 0x8E, write_enable);
+ pci_write_config_byte(dev, 0x8D, write_target);
+
+ pci_notice(dev, "proprietary Ricoh MMC controller disabled (via CardBus function)\n");
+ pci_notice(dev, "MMC cards are now supported by standard SDHCI controller\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
+
+static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
+{
+ u8 write_enable;
+ u8 disable;
+
+ /*
+ * Disable via FireWire interface
+ *
+ * This must be done via function #0
+ */
+ if (PCI_FUNC(dev->devfn))
+ return;
+ /*
+ * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize
+ * certain types of SD/MMC cards. Lowering the SD base clock
+ * frequency from 200Mhz to 50Mhz fixes this issue.
+ *
+ * 0x150 - SD2.0 mode enable for changing base clock
+ * frequency to 50Mhz
+ * 0xe1 - Base clock frequency
+ * 0x32 - 50Mhz new clock frequency
+ * 0xf9 - Key register for 0x150
+ * 0xfc - key register for 0xe1
+ */
+ if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 ||
+ dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
+ pci_write_config_byte(dev, 0xf9, 0xfc);
+ pci_write_config_byte(dev, 0x150, 0x10);
+ pci_write_config_byte(dev, 0xf9, 0x00);
+ pci_write_config_byte(dev, 0xfc, 0x01);
+ pci_write_config_byte(dev, 0xe1, 0x32);
+ pci_write_config_byte(dev, 0xfc, 0x00);
+
+ pci_notice(dev, "MMC controller base frequency changed to 50Mhz.\n");
+ }
+
+ pci_read_config_byte(dev, 0xCB, &disable);
+
+ if (disable & 0x02)
+ return;
+
+ pci_read_config_byte(dev, 0xCA, &write_enable);
+ pci_write_config_byte(dev, 0xCA, 0x57);
+ pci_write_config_byte(dev, 0xCB, disable | 0x02);
+ pci_write_config_byte(dev, 0xCA, write_enable);
+
+ pci_notice(dev, "proprietary Ricoh MMC controller disabled (via FireWire function)\n");
+ pci_notice(dev, "MMC cards are now supported by standard SDHCI controller\n");
+
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
+#endif /*CONFIG_MMC_RICOH_MMC*/
+
+#ifdef CONFIG_DMAR_TABLE
+#define VTUNCERRMSK_REG 0x1ac
+#define VTD_MSK_SPEC_ERRORS (1 << 31)
+/*
+ * This is a quirk for masking VT-d spec-defined errors to platform error
+ * handling logic. Without this, platforms using Intel 7500, 5500 chipsets
+ * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based
+ * on the RAS config settings of the platform) when a VT-d fault happens.
+ * The resulting SMI caused the system to hang.
+ *
+ * VT-d spec-related errors are already handled by the VT-d OS code, so no
+ * need to report the same error through other channels.
+ */
+static void vtd_mask_spec_errors(struct pci_dev *dev)
+{
+ u32 word;
+
+ pci_read_config_dword(dev, VTUNCERRMSK_REG, &word);
+ pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
+#endif
+
+static void fixup_ti816x_class(struct pci_dev *dev)
+{
+ u32 class = dev->class;
+
+ /* TI 816x devices do not have class code set when in PCIe boot mode */
+ dev->class = PCI_CLASS_MULTIMEDIA_VIDEO << 8;
+ pci_info(dev, "PCI class overridden (%#08x -> %#08x)\n",
+ class, dev->class);
+}
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800,
+ PCI_CLASS_NOT_DEFINED, 8, fixup_ti816x_class);
+
+/*
+ * Some PCIe devices do not work reliably with the claimed maximum
+ * payload size supported.
+ */
+static void fixup_mpss_256(struct pci_dev *dev)
+{
+ dev->pcie_mpss = 1; /* 256 bytes */
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ASMEDIA, 0x0612, fixup_mpss_256);
+
+/*
+ * Intel 5000 and 5100 Memory controllers have an erratum with read completion
+ * coalescing (which is enabled by default on some BIOSes) and MPS of 256B.
+ * Since there is no way of knowing what the PCIe MPS on each fabric will be
+ * until all of the devices are discovered and buses walked, read completion
+ * coalescing must be disabled. Unfortunately, it cannot be re-enabled because
+ * it is possible to hotplug a device with MPS of 256B.
+ */
+static void quirk_intel_mc_errata(struct pci_dev *dev)
+{
+ int err;
+ u16 rcc;
+
+ if (pcie_bus_config == PCIE_BUS_TUNE_OFF ||
+ pcie_bus_config == PCIE_BUS_DEFAULT)
+ return;
+
+ /*
+ * Intel erratum specifies bits to change but does not say what
+ * they are. Keeping them magical until such time as the registers
+ * and values can be explained.
+ */
+ err = pci_read_config_word(dev, 0x48, &rcc);
+ if (err) {
+ pci_err(dev, "Error attempting to read the read completion coalescing register\n");
+ return;
+ }
+
+ if (!(rcc & (1 << 10)))
+ return;
+
+ rcc &= ~(1 << 10);
+
+ err = pci_write_config_word(dev, 0x48, rcc);
+ if (err) {
+ pci_err(dev, "Error attempting to write the read completion coalescing register\n");
+ return;
+ }
+
+ pr_info_once("Read completion coalescing disabled due to hardware erratum relating to 256B MPS\n");
+}
+/* Intel 5000 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata);
+/* Intel 5100 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+
+/*
+ * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
+ * To work around this, query the size it should be configured to by the
+ * device and modify the resource end to correspond to this new size.
+ */
+static void quirk_intel_ntb(struct pci_dev *dev)
+{
+ int rc;
+ u8 val;
+
+ rc = pci_read_config_byte(dev, 0x00D0, &val);
+ if (rc)
+ return;
+
+ dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1;
+
+ rc = pci_read_config_byte(dev, 0x00D1, &val);
+ if (rc)
+ return;
+
+ dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
+
+/*
+ * Some BIOS implementations leave the Intel GPU interrupts enabled, even
+ * though no one is handling them (e.g., if the i915 driver is never
+ * loaded). Additionally the interrupt destination is not set up properly
+ * and the interrupt ends up -somewhere-.
+ *
+ * These spurious interrupts are "sticky" and the kernel disables the
+ * (shared) interrupt line after 100,000+ generated interrupts.
+ *
+ * Fix it by disabling the still enabled interrupts. This resolves crashes
+ * often seen on monitor unplug.
+ */
+#define I915_DEIER_REG 0x4400c
+static void disable_igfx_irq(struct pci_dev *dev)
+{
+ void __iomem *regs = pci_iomap(dev, 0, 0);
+ if (regs == NULL) {
+ pci_warn(dev, "igfx quirk: Can't iomap PCI device\n");
+ return;
+ }
+
+ /* Check if any interrupt line is still enabled */
+ if (readl(regs + I915_DEIER_REG) != 0) {
+ pci_warn(dev, "BIOS left Intel GPU interrupts enabled; disabling\n");
+
+ writel(0, regs + I915_DEIER_REG);
+ }
+
+ pci_iounmap(dev, regs);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0042, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0046, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x004a, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0106, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
+
+/*
+ * PCI devices which are on Intel chips can skip the 10ms delay
+ * before entering D3 mode.
+ */
+static void quirk_remove_d3hot_delay(struct pci_dev *dev)
+{
+ dev->d3hot_delay = 0;
+}
+/* C600 Series devices do not need 10ms d3hot_delay */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3hot_delay);
+/* Lynxpoint-H PCH devices do not need 10ms d3hot_delay */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3hot_delay);
+/* Intel Cherrytrail devices do not need 10ms d3hot_delay */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3hot_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3hot_delay);
+
+/*
+ * Some devices may pass our check in pci_intx_mask_supported() if
+ * PCI_COMMAND_INTX_DISABLE works though they actually do not properly
+ * support this feature.
+ */
+static void quirk_broken_intx_masking(struct pci_dev *dev)
+{
+ dev->broken_intx_masking = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x0030,
+ quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
+ quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(0x1b7c, 0x0004, /* Ceton InfiniTV4 */
+ quirk_broken_intx_masking);
+
+/*
+ * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10)
+ * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC
+ *
+ * RTL8110SC - Fails under PCI device assignment using DisINTx masking.
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, 0x8169,
+ quirk_broken_intx_masking);
+
+/*
+ * Intel i40e (XL710/X710) 10/20/40GbE NICs all have broken INTx masking,
+ * DisINTx can be set but the interrupt status bit is non-functional.
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1572, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1574, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1580, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1581, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1583, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1584, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1585, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1586, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1587, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1588, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1589, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158a, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158b, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d0, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d1, quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d2, quirk_broken_intx_masking);
+
+static u16 mellanox_broken_intx_devs[] = {
+ PCI_DEVICE_ID_MELLANOX_HERMON_SDR,
+ PCI_DEVICE_ID_MELLANOX_HERMON_DDR,
+ PCI_DEVICE_ID_MELLANOX_HERMON_QDR,
+ PCI_DEVICE_ID_MELLANOX_HERMON_DDR_GEN2,
+ PCI_DEVICE_ID_MELLANOX_HERMON_QDR_GEN2,
+ PCI_DEVICE_ID_MELLANOX_HERMON_EN,
+ PCI_DEVICE_ID_MELLANOX_HERMON_EN_GEN2,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX_EN,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_T_GEN2,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_GEN2,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_5_GEN2,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX2,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3_PRO,
+};
+
+#define CONNECTX_4_CURR_MAX_MINOR 99
+#define CONNECTX_4_INTX_SUPPORT_MINOR 14
+
+/*
+ * Check ConnectX-4/LX FW version to see if it supports legacy interrupts.
+ * If so, don't mark it as broken.
+ * FW minor > 99 means older FW version format and no INTx masking support.
+ * FW minor < 14 means new FW version format and no INTx masking support.
+ */
+static void mellanox_check_broken_intx_masking(struct pci_dev *pdev)
+{
+ __be32 __iomem *fw_ver;
+ u16 fw_major;
+ u16 fw_minor;
+ u16 fw_subminor;
+ u32 fw_maj_min;
+ u32 fw_sub_min;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mellanox_broken_intx_devs); i++) {
+ if (pdev->device == mellanox_broken_intx_devs[i]) {
+ pdev->broken_intx_masking = 1;
+ return;
+ }
+ }
+
+ /*
+ * Getting here means Connect-IB cards and up. Connect-IB has no INTx
+ * support so shouldn't be checked further
+ */
+ if (pdev->device == PCI_DEVICE_ID_MELLANOX_CONNECTIB)
+ return;
+
+ if (pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4 &&
+ pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX)
+ return;
+
+ /* For ConnectX-4 and ConnectX-4LX, need to check FW support */
+ if (pci_enable_device_mem(pdev)) {
+ pci_warn(pdev, "Can't enable device memory\n");
+ return;
+ }
+
+ fw_ver = ioremap(pci_resource_start(pdev, 0), 4);
+ if (!fw_ver) {
+ pci_warn(pdev, "Can't map ConnectX-4 initialization segment\n");
+ goto out;
+ }
+
+ /* Reading from resource space should be 32b aligned */
+ fw_maj_min = ioread32be(fw_ver);
+ fw_sub_min = ioread32be(fw_ver + 1);
+ fw_major = fw_maj_min & 0xffff;
+ fw_minor = fw_maj_min >> 16;
+ fw_subminor = fw_sub_min & 0xffff;
+ if (fw_minor > CONNECTX_4_CURR_MAX_MINOR ||
+ fw_minor < CONNECTX_4_INTX_SUPPORT_MINOR) {
+ pci_warn(pdev, "ConnectX-4: FW %u.%u.%u doesn't support INTx masking, disabling. Please upgrade FW to %d.14.1100 and up for INTx support\n",
+ fw_major, fw_minor, fw_subminor, pdev->device ==
+ PCI_DEVICE_ID_MELLANOX_CONNECTX4 ? 12 : 14);
+ pdev->broken_intx_masking = 1;
+ }
+
+ iounmap(fw_ver);
+
+out:
+ pci_disable_device(pdev);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID,
+ mellanox_check_broken_intx_masking);
+
+static void quirk_no_bus_reset(struct pci_dev *dev)
+{
+ dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET;
+}
+
+/*
+ * Some NVIDIA GPU devices do not work with bus reset, SBR needs to be
+ * prevented for those affected devices.
+ */
+static void quirk_nvidia_no_bus_reset(struct pci_dev *dev)
+{
+ if ((dev->device & 0xffc0) == 0x2340)
+ quirk_no_bus_reset(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ quirk_nvidia_no_bus_reset);
+
+/*
+ * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset.
+ * The device will throw a Link Down error on AER-capable systems and
+ * regardless of AER, config space of the device is never accessible again
+ * and typically causes the system to hang or reset when access is attempted.
+ * https://lore.kernel.org/r/20140923210318.498dacbd@dualc.maya.org/
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0034, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003e, quirk_no_bus_reset);
+
+/*
+ * Root port on some Cavium CN8xxx chips do not successfully complete a bus
+ * reset when used with certain child devices. After the reset, config
+ * accesses to the child may fail.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset);
+
+/*
+ * Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS
+ * automatically disables LTSSM when Secondary Bus Reset is received and
+ * the device stops working. Prevent bus reset for these devices. With
+ * this change, the device can be assigned to VMs with VFIO, but it will
+ * leak state between VMs. Reference
+ * https://e2e.ti.com/support/processors/f/791/t/954382
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0xb005, quirk_no_bus_reset);
+
+static void quirk_no_pm_reset(struct pci_dev *dev)
+{
+ /*
+ * We can't do a bus reset on root bus devices, but an ineffective
+ * PM reset may be better than nothing.
+ */
+ if (!pci_is_root_bus(dev->bus))
+ dev->dev_flags |= PCI_DEV_FLAGS_NO_PM_RESET;
+}
+
+/*
+ * Some AMD/ATI GPUS (HD8570 - Oland) report that a D3hot->D0 transition
+ * causes a reset (i.e., they advertise NoSoftRst-). This transition seems
+ * to have no effect on the device: it retains the framebuffer contents and
+ * monitor sync. Advertising this support makes other layers, like VFIO,
+ * assume pci_reset_function() is viable for this device. Mark it as
+ * unavailable to skip it when testing reset methods.
+ */
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset);
+
+/*
+ * Thunderbolt controllers with broken MSI hotplug signaling:
+ * Entire 1st generation (Light Ridge, Eagle Ridge, Light Peak) and part
+ * of the 2nd generation (Cactus Ridge 4C up to revision 1, Port Ridge).
+ */
+static void quirk_thunderbolt_hotplug_msi(struct pci_dev *pdev)
+{
+ if (pdev->is_hotplug_bridge &&
+ (pdev->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C ||
+ pdev->revision <= 1))
+ pdev->no_msi = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_RIDGE,
+ quirk_thunderbolt_hotplug_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EAGLE_RIDGE,
+ quirk_thunderbolt_hotplug_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_PEAK,
+ quirk_thunderbolt_hotplug_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
+ quirk_thunderbolt_hotplug_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE,
+ quirk_thunderbolt_hotplug_msi);
+
+#ifdef CONFIG_ACPI
+/*
+ * Apple: Shutdown Cactus Ridge Thunderbolt controller.
+ *
+ * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be
+ * shutdown before suspend. Otherwise the native host interface (NHI) will not
+ * be present after resume if a device was plugged in before suspend.
+ *
+ * The Thunderbolt controller consists of a PCIe switch with downstream
+ * bridges leading to the NHI and to the tunnel PCI bridges.
+ *
+ * This quirk cuts power to the whole chip. Therefore we have to apply it
+ * during suspend_noirq of the upstream bridge.
+ *
+ * Power is automagically restored before resume. No action is needed.
+ */
+static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev)
+{
+ acpi_handle bridge, SXIO, SXFP, SXLV;
+
+ if (!x86_apple_machine)
+ return;
+ if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM)
+ return;
+
+ /*
+ * SXIO/SXFP/SXLF turns off power to the Thunderbolt controller.
+ * We don't know how to turn it back on again, but firmware does,
+ * so we can only use SXIO/SXFP/SXLF if we're suspending via
+ * firmware.
+ */
+ if (!pm_suspend_via_firmware())
+ return;
+
+ bridge = ACPI_HANDLE(&dev->dev);
+ if (!bridge)
+ return;
+
+ /*
+ * SXIO and SXLV are present only on machines requiring this quirk.
+ * Thunderbolt bridges in external devices might have the same
+ * device ID as those on the host, but they will not have the
+ * associated ACPI methods. This implicitly checks that we are at
+ * the right bridge.
+ */
+ if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO))
+ || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP))
+ || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV)))
+ return;
+ pci_info(dev, "quirk: cutting power to Thunderbolt controller...\n");
+
+ /* magic sequence */
+ acpi_execute_simple_method(SXIO, NULL, 1);
+ acpi_execute_simple_method(SXFP, NULL, 0);
+ msleep(300);
+ acpi_execute_simple_method(SXLV, NULL, 0);
+ acpi_execute_simple_method(SXIO, NULL, 0);
+ acpi_execute_simple_method(SXLV, NULL, 0);
+}
+DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
+ quirk_apple_poweroff_thunderbolt);
+#endif
+
+/*
+ * Following are device-specific reset methods which can be used to
+ * reset a single function if other methods (e.g. FLR, PM D0->D3) are
+ * not available.
+ */
+static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, bool probe)
+{
+ /*
+ * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf
+ *
+ * The 82599 supports FLR on VFs, but FLR support is reported only
+ * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5).
+ * Thus we must call pcie_flr() directly without first checking if it is
+ * supported.
+ */
+ if (!probe)
+ pcie_flr(dev);
+ return 0;
+}
+
+#define SOUTH_CHICKEN2 0xc2004
+#define PCH_PP_STATUS 0xc7200
+#define PCH_PP_CONTROL 0xc7204
+#define MSG_CTL 0x45010
+#define NSDE_PWR_STATE 0xd0100
+#define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */
+
+static int reset_ivb_igd(struct pci_dev *dev, bool probe)
+{
+ void __iomem *mmio_base;
+ unsigned long timeout;
+ u32 val;
+
+ if (probe)
+ return 0;
+
+ mmio_base = pci_iomap(dev, 0, 0);
+ if (!mmio_base)
+ return -ENOMEM;
+
+ iowrite32(0x00000002, mmio_base + MSG_CTL);
+
+ /*
+ * Clobbering SOUTH_CHICKEN2 register is fine only if the next
+ * driver loaded sets the right bits. However, this's a reset and
+ * the bits have been set by i915 previously, so we clobber
+ * SOUTH_CHICKEN2 register directly here.
+ */
+ iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2);
+
+ val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe;
+ iowrite32(val, mmio_base + PCH_PP_CONTROL);
+
+ timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT);
+ do {
+ val = ioread32(mmio_base + PCH_PP_STATUS);
+ if ((val & 0xb0000000) == 0)
+ goto reset_complete;
+ msleep(10);
+ } while (time_before(jiffies, timeout));
+ pci_warn(dev, "timeout during reset\n");
+
+reset_complete:
+ iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE);
+
+ pci_iounmap(dev, mmio_base);
+ return 0;
+}
+
+/* Device-specific reset method for Chelsio T4-based adapters */
+static int reset_chelsio_generic_dev(struct pci_dev *dev, bool probe)
+{
+ u16 old_command;
+ u16 msix_flags;
+
+ /*
+ * If this isn't a Chelsio T4-based device, return -ENOTTY indicating
+ * that we have no device-specific reset method.
+ */
+ if ((dev->device & 0xf000) != 0x4000)
+ return -ENOTTY;
+
+ /*
+ * If this is the "probe" phase, return 0 indicating that we can
+ * reset this device.
+ */
+ if (probe)
+ return 0;
+
+ /*
+ * T4 can wedge if there are DMAs in flight within the chip and Bus
+ * Master has been disabled. We need to have it on till the Function
+ * Level Reset completes. (BUS_MASTER is disabled in
+ * pci_reset_function()).
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &old_command);
+ pci_write_config_word(dev, PCI_COMMAND,
+ old_command | PCI_COMMAND_MASTER);
+
+ /*
+ * Perform the actual device function reset, saving and restoring
+ * configuration information around the reset.
+ */
+ pci_save_state(dev);
+
+ /*
+ * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts
+ * are disabled when an MSI-X interrupt message needs to be delivered.
+ * So we briefly re-enable MSI-X interrupts for the duration of the
+ * FLR. The pci_restore_state() below will restore the original
+ * MSI-X state.
+ */
+ pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags);
+ if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0)
+ pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS,
+ msix_flags |
+ PCI_MSIX_FLAGS_ENABLE |
+ PCI_MSIX_FLAGS_MASKALL);
+
+ pcie_flr(dev);
+
+ /*
+ * Restore the configuration information (BAR values, etc.) including
+ * the original PCI Configuration Space Command word, and return
+ * success.
+ */
+ pci_restore_state(dev);
+ pci_write_config_word(dev, PCI_COMMAND, old_command);
+ return 0;
+}
+
+#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed
+#define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156
+#define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166
+
+/*
+ * The Samsung SM961/PM961 controller can sometimes enter a fatal state after
+ * FLR where config space reads from the device return -1. We seem to be
+ * able to avoid this condition if we disable the NVMe controller prior to
+ * FLR. This quirk is generic for any NVMe class device requiring similar
+ * assistance to quiesce the device prior to FLR.
+ *
+ * NVMe specification: https://nvmexpress.org/resources/specifications/
+ * Revision 1.0e:
+ * Chapter 2: Required and optional PCI config registers
+ * Chapter 3: NVMe control registers
+ * Chapter 7.3: Reset behavior
+ */
+static int nvme_disable_and_flr(struct pci_dev *dev, bool probe)
+{
+ void __iomem *bar;
+ u16 cmd;
+ u32 cfg;
+
+ if (dev->class != PCI_CLASS_STORAGE_EXPRESS ||
+ pcie_reset_flr(dev, PCI_RESET_PROBE) || !pci_resource_start(dev, 0))
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ bar = pci_iomap(dev, 0, NVME_REG_CC + sizeof(cfg));
+ if (!bar)
+ return -ENOTTY;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MEMORY);
+
+ cfg = readl(bar + NVME_REG_CC);
+
+ /* Disable controller if enabled */
+ if (cfg & NVME_CC_ENABLE) {
+ u32 cap = readl(bar + NVME_REG_CAP);
+ unsigned long timeout;
+
+ /*
+ * Per nvme_disable_ctrl() skip shutdown notification as it
+ * could complete commands to the admin queue. We only intend
+ * to quiesce the device before reset.
+ */
+ cfg &= ~(NVME_CC_SHN_MASK | NVME_CC_ENABLE);
+
+ writel(cfg, bar + NVME_REG_CC);
+
+ /*
+ * Some controllers require an additional delay here, see
+ * NVME_QUIRK_DELAY_BEFORE_CHK_RDY. None of those are yet
+ * supported by this quirk.
+ */
+
+ /* Cap register provides max timeout in 500ms increments */
+ timeout = ((NVME_CAP_TIMEOUT(cap) + 1) * HZ / 2) + jiffies;
+
+ for (;;) {
+ u32 status = readl(bar + NVME_REG_CSTS);
+
+ /* Ready status becomes zero on disable complete */
+ if (!(status & NVME_CSTS_RDY))
+ break;
+
+ msleep(100);
+
+ if (time_after(jiffies, timeout)) {
+ pci_warn(dev, "Timeout waiting for NVMe ready status to clear after disable\n");
+ break;
+ }
+ }
+ }
+
+ pci_iounmap(dev, bar);
+
+ pcie_flr(dev);
+
+ return 0;
+}
+
+/*
+ * Intel DC P3700 NVMe controller will timeout waiting for ready status
+ * to change after NVMe enable if the driver starts interacting with the
+ * device too soon after FLR. A 250ms delay after FLR has heuristically
+ * proven to produce reliably working results for device assignment cases.
+ */
+static int delay_250ms_after_flr(struct pci_dev *dev, bool probe)
+{
+ if (probe)
+ return pcie_reset_flr(dev, PCI_RESET_PROBE);
+
+ pcie_reset_flr(dev, PCI_RESET_DO_RESET);
+
+ msleep(250);
+
+ return 0;
+}
+
+#define PCI_DEVICE_ID_HINIC_VF 0x375E
+#define HINIC_VF_FLR_TYPE 0x1000
+#define HINIC_VF_FLR_CAP_BIT (1UL << 30)
+#define HINIC_VF_OP 0xE80
+#define HINIC_VF_FLR_PROC_BIT (1UL << 18)
+#define HINIC_OPERATION_TIMEOUT 15000 /* 15 seconds */
+
+/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
+static int reset_hinic_vf_dev(struct pci_dev *pdev, bool probe)
+{
+ unsigned long timeout;
+ void __iomem *bar;
+ u32 val;
+
+ if (probe)
+ return 0;
+
+ bar = pci_iomap(pdev, 0, 0);
+ if (!bar)
+ return -ENOTTY;
+
+ /* Get and check firmware capabilities */
+ val = ioread32be(bar + HINIC_VF_FLR_TYPE);
+ if (!(val & HINIC_VF_FLR_CAP_BIT)) {
+ pci_iounmap(pdev, bar);
+ return -ENOTTY;
+ }
+
+ /* Set HINIC_VF_FLR_PROC_BIT for the start of FLR */
+ val = ioread32be(bar + HINIC_VF_OP);
+ val = val | HINIC_VF_FLR_PROC_BIT;
+ iowrite32be(val, bar + HINIC_VF_OP);
+
+ pcie_flr(pdev);
+
+ /*
+ * The device must recapture its Bus and Device Numbers after FLR
+ * in order generate Completions. Issue a config write to let the
+ * device capture this information.
+ */
+ pci_write_config_word(pdev, PCI_VENDOR_ID, 0);
+
+ /* Firmware clears HINIC_VF_FLR_PROC_BIT when reset is complete */
+ timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);
+ do {
+ val = ioread32be(bar + HINIC_VF_OP);
+ if (!(val & HINIC_VF_FLR_PROC_BIT))
+ goto reset_complete;
+ msleep(20);
+ } while (time_before(jiffies, timeout));
+
+ val = ioread32be(bar + HINIC_VF_OP);
+ if (!(val & HINIC_VF_FLR_PROC_BIT))
+ goto reset_complete;
+
+ pci_warn(pdev, "Reset dev timeout, FLR ack reg: %#010x\n", val);
+
+reset_complete:
+ pci_iounmap(pdev, bar);
+
+ return 0;
+}
+
+static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
+ reset_intel_82599_sfp_virtfn },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA,
+ reset_ivb_igd },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA,
+ reset_ivb_igd },
+ { PCI_VENDOR_ID_SAMSUNG, 0xa804, nvme_disable_and_flr },
+ { PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
+ { PCI_VENDOR_ID_INTEL, 0x0a54, delay_250ms_after_flr },
+ { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
+ reset_chelsio_generic_dev },
+ { PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
+ reset_hinic_vf_dev },
+ { 0 }
+};
+
+/*
+ * These device-specific reset methods are here rather than in a driver
+ * because when a host assigns a device to a guest VM, the host may need
+ * to reset the device but probably doesn't have a driver for it.
+ */
+int pci_dev_specific_reset(struct pci_dev *dev, bool probe)
+{
+ const struct pci_dev_reset_methods *i;
+
+ for (i = pci_dev_reset_methods; i->reset; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID))
+ return i->reset(dev, probe);
+ }
+
+ return -ENOTTY;
+}
+
+static void quirk_dma_func0_alias(struct pci_dev *dev)
+{
+ if (PCI_FUNC(dev->devfn) != 0)
+ pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 0), 1);
+}
+
+/*
+ * https://bugzilla.redhat.com/show_bug.cgi?id=605888
+ *
+ * Some Ricoh devices use function 0 as the PCIe requester ID for DMA.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias);
+
+static void quirk_dma_func1_alias(struct pci_dev *dev)
+{
+ if (PCI_FUNC(dev->devfn) != 1)
+ pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 1), 1);
+}
+
+/*
+ * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some
+ * SKUs function 1 is present and is a legacy IDE controller, in other
+ * SKUs this function is not present, making this a ghost requester.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=42679
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120,
+ quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c136 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9125,
+ quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130,
+ quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9170,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c78 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c134 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9183,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9215,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c127 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9220,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230,
+ quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9235,
+ quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642,
+ quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0645,
+ quirk_dma_func1_alias);
+/* https://bugs.gentoo.org/show_bug.cgi?id=497630 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON,
+ PCI_DEVICE_ID_JMICRON_JMB388_ESD,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c117 */
+DECLARE_PCI_FIXUP_HEADER(0x1c28, /* Lite-On */
+ 0x0122, /* Plextor M6E (Marvell 88SS9183)*/
+ quirk_dma_func1_alias);
+
+/*
+ * Some devices DMA with the wrong devfn, not just the wrong function.
+ * quirk_fixed_dma_alias() uses this table to create fixed aliases, where
+ * the alias is "fixed" and independent of the device devfn.
+ *
+ * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O
+ * processor. To software, this appears as a PCIe-to-PCI/X bridge with a
+ * single device on the secondary bus. In reality, the single exposed
+ * device at 0e.0 is the Address Translation Unit (ATU) of the controller
+ * that provides a bridge to the internal bus of the I/O processor. The
+ * controller supports private devices, which can be hidden from PCI config
+ * space. In the case of the Adaptec 3405, a private device at 01.0
+ * appears to be the DMA engine, which therefore needs to become a DMA
+ * alias for the device.
+ */
+static const struct pci_device_id fixed_dma_alias_tbl[] = {
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
+ PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */
+ .driver_data = PCI_DEVFN(1, 0) },
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
+ PCI_VENDOR_ID_ADAPTEC2, 0x02bc), /* Adaptec 3805 */
+ .driver_data = PCI_DEVFN(1, 0) },
+ { 0 }
+};
+
+static void quirk_fixed_dma_alias(struct pci_dev *dev)
+{
+ const struct pci_device_id *id;
+
+ id = pci_match_id(fixed_dma_alias_tbl, dev);
+ if (id)
+ pci_add_dma_alias(dev, id->driver_data, 1);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias);
+
+/*
+ * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in
+ * using the wrong DMA alias for the device. Some of these devices can be
+ * used as either forward or reverse bridges, so we need to test whether the
+ * device is operating in the correct mode. We could probably apply this
+ * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test
+ * is for a non-root, non-PCIe bridge where the upstream device is PCIe and
+ * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge.
+ */
+static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev)
+{
+ if (!pci_is_root_bus(pdev->bus) &&
+ pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
+ !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) &&
+ pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE)
+ pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS;
+}
+/* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080,
+ quirk_use_pcie_bridge_dma_alias);
+/* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */
+DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias);
+/* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */
+DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias);
+/* ITE 8893 has the same problem as the 8892 */
+DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8893, quirk_use_pcie_bridge_dma_alias);
+/* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */
+DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias);
+
+/*
+ * MIC x200 NTB forwards PCIe traffic using multiple alien RIDs. They have to
+ * be added as aliases to the DMA device in order to allow buffer access
+ * when IOMMU is enabled. Following devfns have to match RIT-LUT table
+ * programmed in the EEPROM.
+ */
+static void quirk_mic_x200_dma_alias(struct pci_dev *pdev)
+{
+ pci_add_dma_alias(pdev, PCI_DEVFN(0x10, 0x0), 1);
+ pci_add_dma_alias(pdev, PCI_DEVFN(0x11, 0x0), 1);
+ pci_add_dma_alias(pdev, PCI_DEVFN(0x12, 0x3), 1);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2260, quirk_mic_x200_dma_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2264, quirk_mic_x200_dma_alias);
+
+/*
+ * Intel Visual Compute Accelerator (VCA) is a family of PCIe add-in devices
+ * exposing computational units via Non Transparent Bridges (NTB, PEX 87xx).
+ *
+ * Similarly to MIC x200, we need to add DMA aliases to allow buffer access
+ * when IOMMU is enabled. These aliases allow computational unit access to
+ * host memory. These aliases mark the whole VCA device as one IOMMU
+ * group.
+ *
+ * All possible slot numbers (0x20) are used, since we are unable to tell
+ * what slot is used on other side. This quirk is intended for both host
+ * and computational unit sides. The VCA devices have up to five functions
+ * (four for DMA channels and one additional).
+ */
+static void quirk_pex_vca_alias(struct pci_dev *pdev)
+{
+ const unsigned int num_pci_slots = 0x20;
+ unsigned int slot;
+
+ for (slot = 0; slot < num_pci_slots; slot++)
+ pci_add_dma_alias(pdev, PCI_DEVFN(slot, 0x0), 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2954, quirk_pex_vca_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2955, quirk_pex_vca_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2956, quirk_pex_vca_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2958, quirk_pex_vca_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2959, quirk_pex_vca_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x295A, quirk_pex_vca_alias);
+
+/*
+ * The IOMMU and interrupt controller on Broadcom Vulcan/Cavium ThunderX2 are
+ * associated not at the root bus, but at a bridge below. This quirk avoids
+ * generating invalid DMA aliases.
+ */
+static void quirk_bridge_cavm_thrx2_pcie_root(struct pci_dev *pdev)
+{
+ pdev->dev_flags |= PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9000,
+ quirk_bridge_cavm_thrx2_pcie_root);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9084,
+ quirk_bridge_cavm_thrx2_pcie_root);
+
+/*
+ * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero)
+ * class code. Fix it.
+ */
+static void quirk_tw686x_class(struct pci_dev *pdev)
+{
+ u32 class = pdev->class;
+
+ /* Use "Multimedia controller" class */
+ pdev->class = (PCI_CLASS_MULTIMEDIA_OTHER << 8) | 0x01;
+ pci_info(pdev, "TW686x PCI class overridden (%#08x -> %#08x)\n",
+ class, pdev->class);
+}
+DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6864, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_tw686x_class);
+DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6865, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_tw686x_class);
+DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6868, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_tw686x_class);
+DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_tw686x_class);
+
+/*
+ * Some devices have problems with Transaction Layer Packets with the Relaxed
+ * Ordering Attribute set. Such devices should mark themselves and other
+ * device drivers should check before sending TLPs with RO set.
+ */
+static void quirk_relaxedordering_disable(struct pci_dev *dev)
+{
+ dev->dev_flags |= PCI_DEV_FLAGS_NO_RELAXED_ORDERING;
+ pci_info(dev, "Disable Relaxed Ordering Attributes to avoid PCIe Completion erratum\n");
+}
+
+/*
+ * Intel Xeon processors based on Broadwell/Haswell microarchitecture Root
+ * Complex have a Flow Control Credit issue which can cause performance
+ * problems with Upstream Transaction Layer Packets with Relaxed Ordering set.
+ */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f01, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f02, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f03, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f04, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f05, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f06, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f07, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f08, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f09, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0a, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0b, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0c, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0d, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0e, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f01, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f02, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f03, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f04, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f05, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f06, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f07, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f08, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f09, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0a, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0b, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0c, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0d, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0e, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+
+/*
+ * The AMD ARM A1100 (aka "SEATTLE") SoC has a bug in its PCIe Root Complex
+ * where Upstream Transaction Layer Packets with the Relaxed Ordering
+ * Attribute clear are allowed to bypass earlier TLPs with Relaxed Ordering
+ * set. This is a violation of the PCIe 3.0 Transaction Ordering Rules
+ * outlined in Section 2.4.1 (PCI Express(r) Base Specification Revision 3.0
+ * November 10, 2010). As a result, on this platform we can't use Relaxed
+ * Ordering for Upstream TLPs.
+ */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a00, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a01, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a02, PCI_CLASS_NOT_DEFINED, 8,
+ quirk_relaxedordering_disable);
+
+/*
+ * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same
+ * values for the Attribute as were supplied in the header of the
+ * corresponding Request, except as explicitly allowed when IDO is used."
+ *
+ * If a non-compliant device generates a completion with a different
+ * attribute than the request, the receiver may accept it (which itself
+ * seems non-compliant based on sec 2.3.2), or it may handle it as a
+ * Malformed TLP or an Unexpected Completion, which will probably lead to a
+ * device access timeout.
+ *
+ * If the non-compliant device generates completions with zero attributes
+ * (instead of copying the attributes from the request), we can work around
+ * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in
+ * upstream devices so they always generate requests with zero attributes.
+ *
+ * This affects other devices under the same Root Port, but since these
+ * attributes are performance hints, there should be no functional problem.
+ *
+ * Note that Configuration Space accesses are never supposed to have TLP
+ * Attributes, so we're safe waiting till after any Configuration Space
+ * accesses to do the Root Port fixup.
+ */
+static void quirk_disable_root_port_attributes(struct pci_dev *pdev)
+{
+ struct pci_dev *root_port = pcie_find_root_port(pdev);
+
+ if (!root_port) {
+ pci_warn(pdev, "PCIe Completion erratum may cause device errors\n");
+ return;
+ }
+
+ pci_info(root_port, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n",
+ dev_name(&pdev->dev));
+ pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_RELAX_EN |
+ PCI_EXP_DEVCTL_NOSNOOP_EN, 0);
+}
+
+/*
+ * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the
+ * Completion it generates.
+ */
+static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev)
+{
+ /*
+ * This mask/compare operation selects for Physical Function 4 on a
+ * T5. We only need to fix up the Root Port once for any of the
+ * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely
+ * 0x54xx so we use that one.
+ */
+ if ((pdev->device & 0xff00) == 0x5400)
+ quirk_disable_root_port_attributes(pdev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
+ quirk_chelsio_T5_disable_root_port_attributes);
+
+/*
+ * pci_acs_ctrl_enabled - compare desired ACS controls with those provided
+ * by a device
+ * @acs_ctrl_req: Bitmask of desired ACS controls
+ * @acs_ctrl_ena: Bitmask of ACS controls enabled or provided implicitly by
+ * the hardware design
+ *
+ * Return 1 if all ACS controls in the @acs_ctrl_req bitmask are included
+ * in @acs_ctrl_ena, i.e., the device provides all the access controls the
+ * caller desires. Return 0 otherwise.
+ */
+static int pci_acs_ctrl_enabled(u16 acs_ctrl_req, u16 acs_ctrl_ena)
+{
+ if ((acs_ctrl_req & acs_ctrl_ena) == acs_ctrl_req)
+ return 1;
+ return 0;
+}
+
+/*
+ * AMD has indicated that the devices below do not support peer-to-peer
+ * in any system where they are found in the southbridge with an AMD
+ * IOMMU in the system. Multifunction devices that do not support
+ * peer-to-peer between functions can claim to support a subset of ACS.
+ * Such devices effectively enable request redirect (RR) and completion
+ * redirect (CR) since all transactions are redirected to the upstream
+ * root complex.
+ *
+ * https://lore.kernel.org/r/201207111426.q6BEQTbh002928@mail.maya.org/
+ * https://lore.kernel.org/r/20120711165854.GM25282@amd.com/
+ * https://lore.kernel.org/r/20121005130857.GX4009@amd.com/
+ *
+ * 1002:4385 SBx00 SMBus Controller
+ * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller
+ * 1002:4383 SBx00 Azalia (Intel HDA)
+ * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller
+ * 1002:4384 SBx00 PCI to PCI Bridge
+ * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=81841#c15
+ *
+ * 1022:780f [AMD] FCH PCI Bridge
+ * 1022:7809 [AMD] FCH USB OHCI Controller
+ */
+static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags)
+{
+#ifdef CONFIG_ACPI
+ struct acpi_table_header *header = NULL;
+ acpi_status status;
+
+ /* Targeting multifunction devices on the SB (appears on root bus) */
+ if (!dev->multifunction || !pci_is_root_bus(dev->bus))
+ return -ENODEV;
+
+ /* The IVRS table describes the AMD IOMMU */
+ status = acpi_get_table("IVRS", 0, &header);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ acpi_put_table(header);
+
+ /* Filter out flags not applicable to multifunction */
+ acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT);
+
+ return pci_acs_ctrl_enabled(acs_flags, PCI_ACS_RR | PCI_ACS_CR);
+#else
+ return -ENODEV;
+#endif
+}
+
+static bool pci_quirk_cavium_acs_match(struct pci_dev *dev)
+{
+ if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
+ return false;
+
+ switch (dev->device) {
+ /*
+ * Effectively selects all downstream ports for whole ThunderX1
+ * (which represents 8 SoCs).
+ */
+ case 0xa000 ... 0xa7ff: /* ThunderX1 */
+ case 0xaf84: /* ThunderX2 */
+ case 0xb884: /* ThunderX3 */
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ if (!pci_quirk_cavium_acs_match(dev))
+ return -ENOTTY;
+
+ /*
+ * Cavium Root Ports don't advertise an ACS capability. However,
+ * the RTL internally implements similar protection as if ACS had
+ * Source Validation, Request Redirection, Completion Redirection,
+ * and Upstream Forwarding features enabled. Assert that the
+ * hardware implements and enables equivalent ACS functionality for
+ * these flags.
+ */
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+}
+
+static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ /*
+ * X-Gene Root Ports matching this quirk do not allow peer-to-peer
+ * transactions with others, allowing masking out these bits as if they
+ * were unimplemented in the ACS capability.
+ */
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+}
+
+/*
+ * Many Zhaoxin Root Ports and Switch Downstream Ports have no ACS capability.
+ * But the implementation could block peer-to-peer transactions between them
+ * and provide ACS-like functionality.
+ */
+static int pci_quirk_zhaoxin_pcie_ports_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ if (!pci_is_pcie(dev) ||
+ ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
+ (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)))
+ return -ENOTTY;
+
+ /*
+ * Future Zhaoxin Root Ports and Switch Downstream Ports will
+ * implement ACS capability in accordance with the PCIe Spec.
+ */
+ switch (dev->device) {
+ case 0x0710 ... 0x071e:
+ case 0x0721:
+ case 0x0723 ... 0x0752:
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+ }
+
+ return false;
+}
+
+/*
+ * Many Intel PCH Root Ports do provide ACS-like features to disable peer
+ * transactions and validate bus numbers in requests, but do not provide an
+ * actual PCIe ACS capability. This is the list of device IDs known to fall
+ * into that category as provided by Intel in Red Hat bugzilla 1037684.
+ */
+static const u16 pci_quirk_intel_pch_acs_ids[] = {
+ /* Ibexpeak PCH */
+ 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49,
+ 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51,
+ /* Cougarpoint PCH */
+ 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17,
+ 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f,
+ /* Pantherpoint PCH */
+ 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17,
+ 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f,
+ /* Lynxpoint-H PCH */
+ 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17,
+ 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f,
+ /* Lynxpoint-LP PCH */
+ 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17,
+ 0x9c18, 0x9c19, 0x9c1a, 0x9c1b,
+ /* Wildcat PCH */
+ 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97,
+ 0x9c98, 0x9c99, 0x9c9a, 0x9c9b,
+ /* Patsburg (X79) PCH */
+ 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e,
+ /* Wellsburg (X99) PCH */
+ 0x8d10, 0x8d11, 0x8d12, 0x8d13, 0x8d14, 0x8d15, 0x8d16, 0x8d17,
+ 0x8d18, 0x8d19, 0x8d1a, 0x8d1b, 0x8d1c, 0x8d1d, 0x8d1e,
+ /* Lynx Point (9 series) PCH */
+ 0x8c90, 0x8c92, 0x8c94, 0x8c96, 0x8c98, 0x8c9a, 0x8c9c, 0x8c9e,
+};
+
+static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev)
+{
+ int i;
+
+ /* Filter out a few obvious non-matches first */
+ if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
+ return false;
+
+ for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++)
+ if (pci_quirk_intel_pch_acs_ids[i] == dev->device)
+ return true;
+
+ return false;
+}
+
+static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ if (!pci_quirk_intel_pch_acs_match(dev))
+ return -ENOTTY;
+
+ if (dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK)
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+
+ return pci_acs_ctrl_enabled(acs_flags, 0);
+}
+
+/*
+ * These QCOM Root Ports do provide ACS-like features to disable peer
+ * transactions and validate bus numbers in requests, but do not provide an
+ * actual PCIe ACS capability. Hardware supports source validation but it
+ * will report the issue as Completer Abort instead of ACS Violation.
+ * Hardware doesn't support peer-to-peer and each Root Port is a Root
+ * Complex with unique segment numbers. It is not possible for one Root
+ * Port to pass traffic to another Root Port. All PCIe transactions are
+ * terminated inside the Root Port.
+ */
+static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+}
+
+/*
+ * Each of these NXP Root Ports is in a Root Complex with a unique segment
+ * number and does provide isolation features to disable peer transactions
+ * and validate bus numbers in requests, but does not provide an ACS
+ * capability.
+ */
+static int pci_quirk_nxp_rp_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+}
+
+static int pci_quirk_al_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
+ return -ENOTTY;
+
+ /*
+ * Amazon's Annapurna Labs root ports don't include an ACS capability,
+ * but do include ACS-like functionality. The hardware doesn't support
+ * peer-to-peer transactions via the root port and each has a unique
+ * segment number.
+ *
+ * Additionally, the root ports cannot send traffic to each other.
+ */
+ acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+
+ return acs_flags ? 0 : 1;
+}
+
+/*
+ * Sunrise Point PCH root ports implement ACS, but unfortunately as shown in
+ * the datasheet (Intel 100 Series Chipset Family PCH Datasheet, Vol. 2,
+ * 12.1.46, 12.1.47)[1] this chipset uses dwords for the ACS capability and
+ * control registers whereas the PCIe spec packs them into words (Rev 3.0,
+ * 7.16 ACS Extended Capability). The bit definitions are correct, but the
+ * control register is at offset 8 instead of 6 and we should probably use
+ * dword accesses to them. This applies to the following PCI Device IDs, as
+ * found in volume 1 of the datasheet[2]:
+ *
+ * 0xa110-0xa11f Sunrise Point-H PCI Express Root Port #{0-16}
+ * 0xa167-0xa16a Sunrise Point-H PCI Express Root Port #{17-20}
+ *
+ * N.B. This doesn't fix what lspci shows.
+ *
+ * The 100 series chipset specification update includes this as errata #23[3].
+ *
+ * The 200 series chipset (Union Point) has the same bug according to the
+ * specification update (Intel 200 Series Chipset Family Platform Controller
+ * Hub, Specification Update, January 2017, Revision 001, Document# 335194-001,
+ * Errata 22)[4]. Per the datasheet[5], root port PCI Device IDs for this
+ * chipset include:
+ *
+ * 0xa290-0xa29f PCI Express Root port #{0-16}
+ * 0xa2e7-0xa2ee PCI Express Root port #{17-24}
+ *
+ * Mobile chipsets are also affected, 7th & 8th Generation
+ * Specification update confirms ACS errata 22, status no fix: (7th Generation
+ * Intel Processor Family I/O for U/Y Platforms and 8th Generation Intel
+ * Processor Family I/O for U Quad Core Platforms Specification Update,
+ * August 2017, Revision 002, Document#: 334660-002)[6]
+ * Device IDs from I/O datasheet: (7th Generation Intel Processor Family I/O
+ * for U/Y Platforms and 8th Generation Intel ® Processor Family I/O for U
+ * Quad Core Platforms, Vol 1 of 2, August 2017, Document#: 334658-003)[7]
+ *
+ * 0x9d10-0x9d1b PCI Express Root port #{1-12}
+ *
+ * [1] https://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-2.html
+ * [2] https://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-1.html
+ * [3] https://www.intel.com/content/www/us/en/chipsets/100-series-chipset-spec-update.html
+ * [4] https://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-spec-update.html
+ * [5] https://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-datasheet-vol-1.html
+ * [6] https://www.intel.com/content/www/us/en/processors/core/7th-gen-core-family-mobile-u-y-processor-lines-i-o-spec-update.html
+ * [7] https://www.intel.com/content/www/us/en/processors/core/7th-gen-core-family-mobile-u-y-processor-lines-i-o-datasheet-vol-1.html
+ */
+static bool pci_quirk_intel_spt_pch_acs_match(struct pci_dev *dev)
+{
+ if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
+ return false;
+
+ switch (dev->device) {
+ case 0xa110 ... 0xa11f: case 0xa167 ... 0xa16a: /* Sunrise Point */
+ case 0xa290 ... 0xa29f: case 0xa2e7 ... 0xa2ee: /* Union Point */
+ case 0x9d10 ... 0x9d1b: /* 7th & 8th Gen Mobile */
+ return true;
+ }
+
+ return false;
+}
+
+#define INTEL_SPT_ACS_CTRL (PCI_ACS_CAP + 4)
+
+static int pci_quirk_intel_spt_pch_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ int pos;
+ u32 cap, ctrl;
+
+ if (!pci_quirk_intel_spt_pch_acs_match(dev))
+ return -ENOTTY;
+
+ pos = dev->acs_cap;
+ if (!pos)
+ return -ENOTTY;
+
+ /* see pci_acs_flags_enabled() */
+ pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap);
+ acs_flags &= (cap | PCI_ACS_EC);
+
+ pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl);
+
+ return pci_acs_ctrl_enabled(acs_flags, ctrl);
+}
+
+static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ /*
+ * SV, TB, and UF are not relevant to multifunction endpoints.
+ *
+ * Multifunction devices are only required to implement RR, CR, and DT
+ * in their ACS capability if they support peer-to-peer transactions.
+ * Devices matching this quirk have been verified by the vendor to not
+ * perform peer-to-peer with other functions, allowing us to mask out
+ * these bits as if they were unimplemented in the ACS capability.
+ */
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR |
+ PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
+}
+
+static int pci_quirk_rciep_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ /*
+ * Intel RCiEP's are required to allow p2p only on translated
+ * addresses. Refer to Intel VT-d specification, r3.1, sec 3.16,
+ * "Root-Complex Peer to Peer Considerations".
+ */
+ if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_END)
+ return -ENOTTY;
+
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+}
+
+static int pci_quirk_brcm_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ /*
+ * iProc PAXB Root Ports don't advertise an ACS capability, but
+ * they do not allow peer-to-peer transactions between Root Ports.
+ * Allow each Root Port to be in a separate IOMMU group by masking
+ * SV/RR/CR/UF bits.
+ */
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+}
+
+/*
+ * Wangxun 10G/1G NICs have no ACS capability, and on multi-function
+ * devices, peer-to-peer transactions are not be used between the functions.
+ * So add an ACS quirk for below devices to isolate functions.
+ * SFxxx 1G NICs(em).
+ * RP1000/RP2000 10G NICs(sp).
+ */
+static int pci_quirk_wangxun_nic_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ switch (dev->device) {
+ case 0x0100 ... 0x010F:
+ case 0x1001:
+ case 0x2001:
+ return pci_acs_ctrl_enabled(acs_flags,
+ PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+ }
+
+ return false;
+}
+
+static const struct pci_dev_acs_enabled {
+ u16 vendor;
+ u16 device;
+ int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags);
+} pci_dev_acs_enabled[] = {
+ { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_AMD, 0x780f, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_SOLARFLARE, 0x0A03, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10E1, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10F1, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10F7, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10F8, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10F9, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10FA, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10FB, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10FC, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1507, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1514, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x151C, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1529, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x152A, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x154D, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x154F, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1551, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1558, pci_quirk_mf_endpoint_acs },
+ /* 82580 */
+ { PCI_VENDOR_ID_INTEL, 0x1509, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x150E, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x150F, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1510, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1511, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1516, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1527, pci_quirk_mf_endpoint_acs },
+ /* 82576 */
+ { PCI_VENDOR_ID_INTEL, 0x10C9, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10E6, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10E7, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10E8, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x150A, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x150D, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1518, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1526, pci_quirk_mf_endpoint_acs },
+ /* 82575 */
+ { PCI_VENDOR_ID_INTEL, 0x10A7, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10A9, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10D6, pci_quirk_mf_endpoint_acs },
+ /* I350 */
+ { PCI_VENDOR_ID_INTEL, 0x1521, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1522, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1523, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1524, pci_quirk_mf_endpoint_acs },
+ /* 82571 (Quads omitted due to non-ACS switch) */
+ { PCI_VENDOR_ID_INTEL, 0x105E, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x105F, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1060, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10D9, pci_quirk_mf_endpoint_acs },
+ /* I219 */
+ { PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_rciep_acs },
+ /* QCOM QDF2xxx root ports */
+ { PCI_VENDOR_ID_QCOM, 0x0400, pci_quirk_qcom_rp_acs },
+ { PCI_VENDOR_ID_QCOM, 0x0401, pci_quirk_qcom_rp_acs },
+ /* HXT SD4800 root ports. The ACS design is same as QCOM QDF2xxx */
+ { PCI_VENDOR_ID_HXT, 0x0401, pci_quirk_qcom_rp_acs },
+ /* Intel PCH root ports */
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs },
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_spt_pch_acs },
+ { 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */
+ { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */
+ /* Cavium ThunderX */
+ { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs },
+ /* Cavium multi-function devices */
+ { PCI_VENDOR_ID_CAVIUM, 0xA026, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_CAVIUM, 0xA059, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_CAVIUM, 0xA060, pci_quirk_mf_endpoint_acs },
+ /* APM X-Gene */
+ { PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs },
+ /* Ampere Computing */
+ { PCI_VENDOR_ID_AMPERE, 0xE005, pci_quirk_xgene_acs },
+ { PCI_VENDOR_ID_AMPERE, 0xE006, pci_quirk_xgene_acs },
+ { PCI_VENDOR_ID_AMPERE, 0xE007, pci_quirk_xgene_acs },
+ { PCI_VENDOR_ID_AMPERE, 0xE008, pci_quirk_xgene_acs },
+ { PCI_VENDOR_ID_AMPERE, 0xE009, pci_quirk_xgene_acs },
+ { PCI_VENDOR_ID_AMPERE, 0xE00A, pci_quirk_xgene_acs },
+ { PCI_VENDOR_ID_AMPERE, 0xE00B, pci_quirk_xgene_acs },
+ { PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs },
+ /* Broadcom multi-function device */
+ { PCI_VENDOR_ID_BROADCOM, 0x16D7, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs },
+ /* Amazon Annapurna Labs */
+ { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs },
+ /* Zhaoxin multi-function devices */
+ { PCI_VENDOR_ID_ZHAOXIN, 0x3038, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_ZHAOXIN, 0x3104, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_ZHAOXIN, 0x9083, pci_quirk_mf_endpoint_acs },
+ /* NXP root ports, xx=16, 12, or 08 cores */
+ /* LX2xx0A : without security features + CAN-FD */
+ { PCI_VENDOR_ID_NXP, 0x8d81, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8da1, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8d83, pci_quirk_nxp_rp_acs },
+ /* LX2xx0C : security features + CAN-FD */
+ { PCI_VENDOR_ID_NXP, 0x8d80, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8da0, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8d82, pci_quirk_nxp_rp_acs },
+ /* LX2xx0E : security features + CAN */
+ { PCI_VENDOR_ID_NXP, 0x8d90, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8db0, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8d92, pci_quirk_nxp_rp_acs },
+ /* LX2xx0N : without security features + CAN */
+ { PCI_VENDOR_ID_NXP, 0x8d91, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8db1, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8d93, pci_quirk_nxp_rp_acs },
+ /* LX2xx2A : without security features + CAN-FD */
+ { PCI_VENDOR_ID_NXP, 0x8d89, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8da9, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8d8b, pci_quirk_nxp_rp_acs },
+ /* LX2xx2C : security features + CAN-FD */
+ { PCI_VENDOR_ID_NXP, 0x8d88, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8da8, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8d8a, pci_quirk_nxp_rp_acs },
+ /* LX2xx2E : security features + CAN */
+ { PCI_VENDOR_ID_NXP, 0x8d98, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8db8, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8d9a, pci_quirk_nxp_rp_acs },
+ /* LX2xx2N : without security features + CAN */
+ { PCI_VENDOR_ID_NXP, 0x8d99, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8db9, pci_quirk_nxp_rp_acs },
+ { PCI_VENDOR_ID_NXP, 0x8d9b, pci_quirk_nxp_rp_acs },
+ /* Zhaoxin Root/Downstream Ports */
+ { PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs },
+ /* Wangxun nics */
+ { PCI_VENDOR_ID_WANGXUN, PCI_ANY_ID, pci_quirk_wangxun_nic_acs },
+ { 0 }
+};
+
+/*
+ * pci_dev_specific_acs_enabled - check whether device provides ACS controls
+ * @dev: PCI device
+ * @acs_flags: Bitmask of desired ACS controls
+ *
+ * Returns:
+ * -ENOTTY: No quirk applies to this device; we can't tell whether the
+ * device provides the desired controls
+ * 0: Device does not provide all the desired controls
+ * >0: Device provides all the controls in @acs_flags
+ */
+int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags)
+{
+ const struct pci_dev_acs_enabled *i;
+ int ret;
+
+ /*
+ * Allow devices that do not expose standard PCIe ACS capabilities
+ * or control to indicate their support here. Multi-function express
+ * devices which do not allow internal peer-to-peer between functions,
+ * but do not implement PCIe ACS may wish to return true here.
+ */
+ for (i = pci_dev_acs_enabled; i->acs_enabled; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID)) {
+ ret = i->acs_enabled(dev, acs_flags);
+ if (ret >= 0)
+ return ret;
+ }
+ }
+
+ return -ENOTTY;
+}
+
+/* Config space offset of Root Complex Base Address register */
+#define INTEL_LPC_RCBA_REG 0xf0
+/* 31:14 RCBA address */
+#define INTEL_LPC_RCBA_MASK 0xffffc000
+/* RCBA Enable */
+#define INTEL_LPC_RCBA_ENABLE (1 << 0)
+
+/* Backbone Scratch Pad Register */
+#define INTEL_BSPR_REG 0x1104
+/* Backbone Peer Non-Posted Disable */
+#define INTEL_BSPR_REG_BPNPD (1 << 8)
+/* Backbone Peer Posted Disable */
+#define INTEL_BSPR_REG_BPPD (1 << 9)
+
+/* Upstream Peer Decode Configuration Register */
+#define INTEL_UPDCR_REG 0x1014
+/* 5:0 Peer Decode Enable bits */
+#define INTEL_UPDCR_REG_MASK 0x3f
+
+static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev)
+{
+ u32 rcba, bspr, updcr;
+ void __iomem *rcba_mem;
+
+ /*
+ * Read the RCBA register from the LPC (D31:F0). PCH root ports
+ * are D28:F* and therefore get probed before LPC, thus we can't
+ * use pci_get_slot()/pci_read_config_dword() here.
+ */
+ pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0),
+ INTEL_LPC_RCBA_REG, &rcba);
+ if (!(rcba & INTEL_LPC_RCBA_ENABLE))
+ return -EINVAL;
+
+ rcba_mem = ioremap(rcba & INTEL_LPC_RCBA_MASK,
+ PAGE_ALIGN(INTEL_UPDCR_REG));
+ if (!rcba_mem)
+ return -ENOMEM;
+
+ /*
+ * The BSPR can disallow peer cycles, but it's set by soft strap and
+ * therefore read-only. If both posted and non-posted peer cycles are
+ * disallowed, we're ok. If either are allowed, then we need to use
+ * the UPDCR to disable peer decodes for each port. This provides the
+ * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF
+ */
+ bspr = readl(rcba_mem + INTEL_BSPR_REG);
+ bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD;
+ if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) {
+ updcr = readl(rcba_mem + INTEL_UPDCR_REG);
+ if (updcr & INTEL_UPDCR_REG_MASK) {
+ pci_info(dev, "Disabling UPDCR peer decodes\n");
+ updcr &= ~INTEL_UPDCR_REG_MASK;
+ writel(updcr, rcba_mem + INTEL_UPDCR_REG);
+ }
+ }
+
+ iounmap(rcba_mem);
+ return 0;
+}
+
+/* Miscellaneous Port Configuration register */
+#define INTEL_MPC_REG 0xd8
+/* MPC: Invalid Receive Bus Number Check Enable */
+#define INTEL_MPC_REG_IRBNCE (1 << 26)
+
+static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev)
+{
+ u32 mpc;
+
+ /*
+ * When enabled, the IRBNCE bit of the MPC register enables the
+ * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which
+ * ensures that requester IDs fall within the bus number range
+ * of the bridge. Enable if not already.
+ */
+ pci_read_config_dword(dev, INTEL_MPC_REG, &mpc);
+ if (!(mpc & INTEL_MPC_REG_IRBNCE)) {
+ pci_info(dev, "Enabling MPC IRBNCE\n");
+ mpc |= INTEL_MPC_REG_IRBNCE;
+ pci_write_config_word(dev, INTEL_MPC_REG, mpc);
+ }
+}
+
+/*
+ * Currently this quirk does the equivalent of
+ * PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF
+ *
+ * TODO: This quirk also needs to do equivalent of PCI_ACS_TB,
+ * if dev->external_facing || dev->untrusted
+ */
+static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev)
+{
+ if (!pci_quirk_intel_pch_acs_match(dev))
+ return -ENOTTY;
+
+ if (pci_quirk_enable_intel_lpc_acs(dev)) {
+ pci_warn(dev, "Failed to enable Intel PCH ACS quirk\n");
+ return 0;
+ }
+
+ pci_quirk_enable_intel_rp_mpc_acs(dev);
+
+ dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK;
+
+ pci_info(dev, "Intel PCH root port ACS workaround enabled\n");
+
+ return 0;
+}
+
+static int pci_quirk_enable_intel_spt_pch_acs(struct pci_dev *dev)
+{
+ int pos;
+ u32 cap, ctrl;
+
+ if (!pci_quirk_intel_spt_pch_acs_match(dev))
+ return -ENOTTY;
+
+ pos = dev->acs_cap;
+ if (!pos)
+ return -ENOTTY;
+
+ pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap);
+ pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl);
+
+ ctrl |= (cap & PCI_ACS_SV);
+ ctrl |= (cap & PCI_ACS_RR);
+ ctrl |= (cap & PCI_ACS_CR);
+ ctrl |= (cap & PCI_ACS_UF);
+
+ if (pci_ats_disabled() || dev->external_facing || dev->untrusted)
+ ctrl |= (cap & PCI_ACS_TB);
+
+ pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl);
+
+ pci_info(dev, "Intel SPT PCH root port ACS workaround enabled\n");
+
+ return 0;
+}
+
+static int pci_quirk_disable_intel_spt_pch_acs_redir(struct pci_dev *dev)
+{
+ int pos;
+ u32 cap, ctrl;
+
+ if (!pci_quirk_intel_spt_pch_acs_match(dev))
+ return -ENOTTY;
+
+ pos = dev->acs_cap;
+ if (!pos)
+ return -ENOTTY;
+
+ pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap);
+ pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl);
+
+ ctrl &= ~(PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC);
+
+ pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl);
+
+ pci_info(dev, "Intel SPT PCH root port workaround: disabled ACS redirect\n");
+
+ return 0;
+}
+
+static const struct pci_dev_acs_ops {
+ u16 vendor;
+ u16 device;
+ int (*enable_acs)(struct pci_dev *dev);
+ int (*disable_acs_redir)(struct pci_dev *dev);
+} pci_dev_acs_ops[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ .enable_acs = pci_quirk_enable_intel_pch_acs,
+ },
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ .enable_acs = pci_quirk_enable_intel_spt_pch_acs,
+ .disable_acs_redir = pci_quirk_disable_intel_spt_pch_acs_redir,
+ },
+};
+
+int pci_dev_specific_enable_acs(struct pci_dev *dev)
+{
+ const struct pci_dev_acs_ops *p;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(pci_dev_acs_ops); i++) {
+ p = &pci_dev_acs_ops[i];
+ if ((p->vendor == dev->vendor ||
+ p->vendor == (u16)PCI_ANY_ID) &&
+ (p->device == dev->device ||
+ p->device == (u16)PCI_ANY_ID) &&
+ p->enable_acs) {
+ ret = p->enable_acs(dev);
+ if (ret >= 0)
+ return ret;
+ }
+ }
+
+ return -ENOTTY;
+}
+
+int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
+{
+ const struct pci_dev_acs_ops *p;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(pci_dev_acs_ops); i++) {
+ p = &pci_dev_acs_ops[i];
+ if ((p->vendor == dev->vendor ||
+ p->vendor == (u16)PCI_ANY_ID) &&
+ (p->device == dev->device ||
+ p->device == (u16)PCI_ANY_ID) &&
+ p->disable_acs_redir) {
+ ret = p->disable_acs_redir(dev);
+ if (ret >= 0)
+ return ret;
+ }
+ }
+
+ return -ENOTTY;
+}
+
+/*
+ * The PCI capabilities list for Intel DH895xCC VFs (device ID 0x0443) with
+ * QuickAssist Technology (QAT) is prematurely terminated in hardware. The
+ * Next Capability pointer in the MSI Capability Structure should point to
+ * the PCIe Capability Structure but is incorrectly hardwired as 0 terminating
+ * the list.
+ */
+static void quirk_intel_qat_vf_cap(struct pci_dev *pdev)
+{
+ int pos, i = 0, ret;
+ u8 next_cap;
+ u16 reg16, *cap;
+ struct pci_cap_saved_state *state;
+
+ /* Bail if the hardware bug is fixed */
+ if (pdev->pcie_cap || pci_find_capability(pdev, PCI_CAP_ID_EXP))
+ return;
+
+ /* Bail if MSI Capability Structure is not found for some reason */
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ if (!pos)
+ return;
+
+ /*
+ * Bail if Next Capability pointer in the MSI Capability Structure
+ * is not the expected incorrect 0x00.
+ */
+ pci_read_config_byte(pdev, pos + 1, &next_cap);
+ if (next_cap)
+ return;
+
+ /*
+ * PCIe Capability Structure is expected to be at 0x50 and should
+ * terminate the list (Next Capability pointer is 0x00). Verify
+ * Capability Id and Next Capability pointer is as expected.
+ * Open-code some of set_pcie_port_type() and pci_cfg_space_size_ext()
+ * to correctly set kernel data structures which have already been
+ * set incorrectly due to the hardware bug.
+ */
+ pos = 0x50;
+ pci_read_config_word(pdev, pos, &reg16);
+ if (reg16 == (0x0000 | PCI_CAP_ID_EXP)) {
+ u32 status;
+#ifndef PCI_EXP_SAVE_REGS
+#define PCI_EXP_SAVE_REGS 7
+#endif
+ int size = PCI_EXP_SAVE_REGS * sizeof(u16);
+
+ pdev->pcie_cap = pos;
+ pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
+ pdev->pcie_flags_reg = reg16;
+ pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, &reg16);
+ pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
+
+ pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE;
+ ret = pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status);
+ if ((ret != PCIBIOS_SUCCESSFUL) || (PCI_POSSIBLE_ERROR(status)))
+ pdev->cfg_size = PCI_CFG_SPACE_SIZE;
+
+ if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP))
+ return;
+
+ /* Save PCIe cap */
+ state = kzalloc(sizeof(*state) + size, GFP_KERNEL);
+ if (!state)
+ return;
+
+ state->cap.cap_nr = PCI_CAP_ID_EXP;
+ state->cap.cap_extended = 0;
+ state->cap.size = size;
+ cap = (u16 *)&state->cap.data[0];
+ pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_RTCTL, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_LNKCTL2, &cap[i++]);
+ pcie_capability_read_word(pdev, PCI_EXP_SLTCTL2, &cap[i++]);
+ hlist_add_head(&state->next, &pdev->saved_cap_space);
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap);
+
+/*
+ * FLR may cause the following to devices to hang:
+ *
+ * AMD Starship/Matisse HD Audio Controller 0x1487
+ * AMD Starship USB 3.0 Host Controller 0x148c
+ * AMD Matisse USB 3.0 Host Controller 0x149c
+ * Intel 82579LM Gigabit Ethernet Controller 0x1502
+ * Intel 82579V Gigabit Ethernet Controller 0x1503
+ *
+ */
+static void quirk_no_flr(struct pci_dev *dev)
+{
+ dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x1487, quirk_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x148c, quirk_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x149c, quirk_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AMD, 0x7901, quirk_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_no_flr);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_no_flr);
+
+static void quirk_no_ext_tags(struct pci_dev *pdev)
+{
+ struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus);
+
+ if (!bridge)
+ return;
+
+ bridge->no_ext_tags = 1;
+ pci_info(pdev, "disabling Extended Tags (this device can't handle them)\n");
+
+ pci_walk_bus(bridge->bus, pci_configure_extended_tags, NULL);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0132, quirk_no_ext_tags);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0140, quirk_no_ext_tags);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0141, quirk_no_ext_tags);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0142, quirk_no_ext_tags);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0144, quirk_no_ext_tags);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0420, quirk_no_ext_tags);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0422, quirk_no_ext_tags);
+
+#ifdef CONFIG_PCI_ATS
+static void quirk_no_ats(struct pci_dev *pdev)
+{
+ pci_info(pdev, "disabling ATS\n");
+ pdev->ats_cap = 0;
+}
+
+/*
+ * Some devices require additional driver setup to enable ATS. Don't use
+ * ATS for those devices as ATS will be enabled before the driver has had a
+ * chance to load and configure the device.
+ */
+static void quirk_amd_harvest_no_ats(struct pci_dev *pdev)
+{
+ if (pdev->device == 0x15d8) {
+ if (pdev->revision == 0xcf &&
+ pdev->subsystem_vendor == 0xea50 &&
+ (pdev->subsystem_device == 0xce19 ||
+ pdev->subsystem_device == 0xcc10 ||
+ pdev->subsystem_device == 0xcc08))
+ quirk_no_ats(pdev);
+ } else {
+ quirk_no_ats(pdev);
+ }
+}
+
+/* AMD Stoney platform GPU */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x98e4, quirk_amd_harvest_no_ats);
+/* AMD Iceland dGPU */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6900, quirk_amd_harvest_no_ats);
+/* AMD Navi10 dGPU */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7310, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7312, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7318, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7319, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731a, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731b, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731e, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x731f, quirk_amd_harvest_no_ats);
+/* AMD Navi14 dGPU */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7340, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7341, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7347, quirk_amd_harvest_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x734f, quirk_amd_harvest_no_ats);
+/* AMD Raven platform iGPU */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x15d8, quirk_amd_harvest_no_ats);
+
+/*
+ * Intel IPU E2000 revisions before C0 implement incorrect endianness
+ * in ATS Invalidate Request message body. Disable ATS for those devices.
+ */
+static void quirk_intel_e2000_no_ats(struct pci_dev *pdev)
+{
+ if (pdev->revision < 0x20)
+ quirk_no_ats(pdev);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1451, quirk_intel_e2000_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1452, quirk_intel_e2000_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1453, quirk_intel_e2000_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1454, quirk_intel_e2000_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1455, quirk_intel_e2000_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1457, quirk_intel_e2000_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1459, quirk_intel_e2000_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x145a, quirk_intel_e2000_no_ats);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x145c, quirk_intel_e2000_no_ats);
+#endif /* CONFIG_PCI_ATS */
+
+/* Freescale PCIe doesn't support MSI in RC mode */
+static void quirk_fsl_no_msi(struct pci_dev *pdev)
+{
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
+ pdev->no_msi = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_no_msi);
+
+/*
+ * Although not allowed by the spec, some multi-function devices have
+ * dependencies of one function (consumer) on another (supplier). For the
+ * consumer to work in D0, the supplier must also be in D0. Create a
+ * device link from the consumer to the supplier to enforce this
+ * dependency. Runtime PM is allowed by default on the consumer to prevent
+ * it from permanently keeping the supplier awake.
+ */
+static void pci_create_device_link(struct pci_dev *pdev, unsigned int consumer,
+ unsigned int supplier, unsigned int class,
+ unsigned int class_shift)
+{
+ struct pci_dev *supplier_pdev;
+
+ if (PCI_FUNC(pdev->devfn) != consumer)
+ return;
+
+ supplier_pdev = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
+ pdev->bus->number,
+ PCI_DEVFN(PCI_SLOT(pdev->devfn), supplier));
+ if (!supplier_pdev || (supplier_pdev->class >> class_shift) != class) {
+ pci_dev_put(supplier_pdev);
+ return;
+ }
+
+ if (device_link_add(&pdev->dev, &supplier_pdev->dev,
+ DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME))
+ pci_info(pdev, "D0 power state depends on %s\n",
+ pci_name(supplier_pdev));
+ else
+ pci_err(pdev, "Cannot enforce power dependency on %s\n",
+ pci_name(supplier_pdev));
+
+ pm_runtime_allow(&pdev->dev);
+ pci_dev_put(supplier_pdev);
+}
+
+/*
+ * Create device link for GPUs with integrated HDA controller for streaming
+ * audio to attached displays.
+ */
+static void quirk_gpu_hda(struct pci_dev *hda)
+{
+ pci_create_device_link(hda, 1, 0, PCI_BASE_CLASS_DISPLAY, 16);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMD, PCI_ANY_ID,
+ PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda);
+
+/*
+ * Create device link for GPUs with integrated USB xHCI Host
+ * controller to VGA.
+ */
+static void quirk_gpu_usb(struct pci_dev *usb)
+{
+ pci_create_device_link(usb, 2, 0, PCI_BASE_CLASS_DISPLAY, 16);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_USB, 8, quirk_gpu_usb);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_USB, 8, quirk_gpu_usb);
+
+/*
+ * Create device link for GPUs with integrated Type-C UCSI controller
+ * to VGA. Currently there is no class code defined for UCSI device over PCI
+ * so using UNKNOWN class for now and it will be updated when UCSI
+ * over PCI gets a class code.
+ */
+#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80
+static void quirk_gpu_usb_typec_ucsi(struct pci_dev *ucsi)
+{
+ pci_create_device_link(ucsi, 3, 0, PCI_BASE_CLASS_DISPLAY, 16);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_UNKNOWN, 8,
+ quirk_gpu_usb_typec_ucsi);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_SERIAL_UNKNOWN, 8,
+ quirk_gpu_usb_typec_ucsi);
+
+/*
+ * Enable the NVIDIA GPU integrated HDA controller if the BIOS left it
+ * disabled. https://devtalk.nvidia.com/default/topic/1024022
+ */
+static void quirk_nvidia_hda(struct pci_dev *gpu)
+{
+ u8 hdr_type;
+ u32 val;
+
+ /* There was no integrated HDA controller before MCP89 */
+ if (gpu->device < PCI_DEVICE_ID_NVIDIA_GEFORCE_320M)
+ return;
+
+ /* Bit 25 at offset 0x488 enables the HDA controller */
+ pci_read_config_dword(gpu, 0x488, &val);
+ if (val & BIT(25))
+ return;
+
+ pci_info(gpu, "Enabling HDA controller\n");
+ pci_write_config_dword(gpu, 0x488, val | BIT(25));
+
+ /* The GPU becomes a multi-function device when the HDA is enabled */
+ pci_read_config_byte(gpu, PCI_HEADER_TYPE, &hdr_type);
+ gpu->multifunction = !!(hdr_type & 0x80);
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_BASE_CLASS_DISPLAY, 16, quirk_nvidia_hda);
+DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_BASE_CLASS_DISPLAY, 16, quirk_nvidia_hda);
+
+/*
+ * Some IDT switches incorrectly flag an ACS Source Validation error on
+ * completions for config read requests even though PCIe r4.0, sec
+ * 6.12.1.1, says that completions are never affected by ACS Source
+ * Validation. Here's the text of IDT 89H32H8G3-YC, erratum #36:
+ *
+ * Item #36 - Downstream port applies ACS Source Validation to Completions
+ * Section 6.12.1.1 of the PCI Express Base Specification 3.1 states that
+ * completions are never affected by ACS Source Validation. However,
+ * completions received by a downstream port of the PCIe switch from a
+ * device that has not yet captured a PCIe bus number are incorrectly
+ * dropped by ACS Source Validation by the switch downstream port.
+ *
+ * The workaround suggested by IDT is to issue a config write to the
+ * downstream device before issuing the first config read. This allows the
+ * downstream device to capture its bus and device numbers (see PCIe r4.0,
+ * sec 2.2.9), thus avoiding the ACS error on the completion.
+ *
+ * However, we don't know when the device is ready to accept the config
+ * write, so we do config reads until we receive a non-Config Request Retry
+ * Status, then do the config write.
+ *
+ * To avoid hitting the erratum when doing the config reads, we disable ACS
+ * SV around this process.
+ */
+int pci_idt_bus_quirk(struct pci_bus *bus, int devfn, u32 *l, int timeout)
+{
+ int pos;
+ u16 ctrl = 0;
+ bool found;
+ struct pci_dev *bridge = bus->self;
+
+ pos = bridge->acs_cap;
+
+ /* Disable ACS SV before initial config reads */
+ if (pos) {
+ pci_read_config_word(bridge, pos + PCI_ACS_CTRL, &ctrl);
+ if (ctrl & PCI_ACS_SV)
+ pci_write_config_word(bridge, pos + PCI_ACS_CTRL,
+ ctrl & ~PCI_ACS_SV);
+ }
+
+ found = pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout);
+
+ /* Write Vendor ID (read-only) so the endpoint latches its bus/dev */
+ if (found)
+ pci_bus_write_config_word(bus, devfn, PCI_VENDOR_ID, 0);
+
+ /* Re-enable ACS_SV if it was previously enabled */
+ if (ctrl & PCI_ACS_SV)
+ pci_write_config_word(bridge, pos + PCI_ACS_CTRL, ctrl);
+
+ return found;
+}
+
+/*
+ * Microsemi Switchtec NTB uses devfn proxy IDs to move TLPs between
+ * NT endpoints via the internal switch fabric. These IDs replace the
+ * originating requestor ID TLPs which access host memory on peer NTB
+ * ports. Therefore, all proxy IDs must be aliased to the NTB device
+ * to permit access when the IOMMU is turned on.
+ */
+static void quirk_switchtec_ntb_dma_alias(struct pci_dev *pdev)
+{
+ void __iomem *mmio;
+ struct ntb_info_regs __iomem *mmio_ntb;
+ struct ntb_ctrl_regs __iomem *mmio_ctrl;
+ u64 partition_map;
+ u8 partition;
+ int pp;
+
+ if (pci_enable_device(pdev)) {
+ pci_err(pdev, "Cannot enable Switchtec device\n");
+ return;
+ }
+
+ mmio = pci_iomap(pdev, 0, 0);
+ if (mmio == NULL) {
+ pci_disable_device(pdev);
+ pci_err(pdev, "Cannot iomap Switchtec device\n");
+ return;
+ }
+
+ pci_info(pdev, "Setting Switchtec proxy ID aliases\n");
+
+ mmio_ntb = mmio + SWITCHTEC_GAS_NTB_OFFSET;
+ mmio_ctrl = (void __iomem *) mmio_ntb + SWITCHTEC_NTB_REG_CTRL_OFFSET;
+
+ partition = ioread8(&mmio_ntb->partition_id);
+
+ partition_map = ioread32(&mmio_ntb->ep_map);
+ partition_map |= ((u64) ioread32(&mmio_ntb->ep_map + 4)) << 32;
+ partition_map &= ~(1ULL << partition);
+
+ for (pp = 0; pp < (sizeof(partition_map) * 8); pp++) {
+ struct ntb_ctrl_regs __iomem *mmio_peer_ctrl;
+ u32 table_sz = 0;
+ int te;
+
+ if (!(partition_map & (1ULL << pp)))
+ continue;
+
+ pci_dbg(pdev, "Processing partition %d\n", pp);
+
+ mmio_peer_ctrl = &mmio_ctrl[pp];
+
+ table_sz = ioread16(&mmio_peer_ctrl->req_id_table_size);
+ if (!table_sz) {
+ pci_warn(pdev, "Partition %d table_sz 0\n", pp);
+ continue;
+ }
+
+ if (table_sz > 512) {
+ pci_warn(pdev,
+ "Invalid Switchtec partition %d table_sz %d\n",
+ pp, table_sz);
+ continue;
+ }
+
+ for (te = 0; te < table_sz; te++) {
+ u32 rid_entry;
+ u8 devfn;
+
+ rid_entry = ioread32(&mmio_peer_ctrl->req_id_table[te]);
+ devfn = (rid_entry >> 1) & 0xFF;
+ pci_dbg(pdev,
+ "Aliasing Partition %d Proxy ID %02x.%d\n",
+ pp, PCI_SLOT(devfn), PCI_FUNC(devfn));
+ pci_add_dma_alias(pdev, devfn, 1);
+ }
+ }
+
+ pci_iounmap(pdev, mmio);
+ pci_disable_device(pdev);
+}
+#define SWITCHTEC_QUIRK(vid) \
+ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_MICROSEMI, vid, \
+ PCI_CLASS_BRIDGE_OTHER, 8, quirk_switchtec_ntb_dma_alias)
+
+SWITCHTEC_QUIRK(0x8531); /* PFX 24xG3 */
+SWITCHTEC_QUIRK(0x8532); /* PFX 32xG3 */
+SWITCHTEC_QUIRK(0x8533); /* PFX 48xG3 */
+SWITCHTEC_QUIRK(0x8534); /* PFX 64xG3 */
+SWITCHTEC_QUIRK(0x8535); /* PFX 80xG3 */
+SWITCHTEC_QUIRK(0x8536); /* PFX 96xG3 */
+SWITCHTEC_QUIRK(0x8541); /* PSX 24xG3 */
+SWITCHTEC_QUIRK(0x8542); /* PSX 32xG3 */
+SWITCHTEC_QUIRK(0x8543); /* PSX 48xG3 */
+SWITCHTEC_QUIRK(0x8544); /* PSX 64xG3 */
+SWITCHTEC_QUIRK(0x8545); /* PSX 80xG3 */
+SWITCHTEC_QUIRK(0x8546); /* PSX 96xG3 */
+SWITCHTEC_QUIRK(0x8551); /* PAX 24XG3 */
+SWITCHTEC_QUIRK(0x8552); /* PAX 32XG3 */
+SWITCHTEC_QUIRK(0x8553); /* PAX 48XG3 */
+SWITCHTEC_QUIRK(0x8554); /* PAX 64XG3 */
+SWITCHTEC_QUIRK(0x8555); /* PAX 80XG3 */
+SWITCHTEC_QUIRK(0x8556); /* PAX 96XG3 */
+SWITCHTEC_QUIRK(0x8561); /* PFXL 24XG3 */
+SWITCHTEC_QUIRK(0x8562); /* PFXL 32XG3 */
+SWITCHTEC_QUIRK(0x8563); /* PFXL 48XG3 */
+SWITCHTEC_QUIRK(0x8564); /* PFXL 64XG3 */
+SWITCHTEC_QUIRK(0x8565); /* PFXL 80XG3 */
+SWITCHTEC_QUIRK(0x8566); /* PFXL 96XG3 */
+SWITCHTEC_QUIRK(0x8571); /* PFXI 24XG3 */
+SWITCHTEC_QUIRK(0x8572); /* PFXI 32XG3 */
+SWITCHTEC_QUIRK(0x8573); /* PFXI 48XG3 */
+SWITCHTEC_QUIRK(0x8574); /* PFXI 64XG3 */
+SWITCHTEC_QUIRK(0x8575); /* PFXI 80XG3 */
+SWITCHTEC_QUIRK(0x8576); /* PFXI 96XG3 */
+SWITCHTEC_QUIRK(0x4000); /* PFX 100XG4 */
+SWITCHTEC_QUIRK(0x4084); /* PFX 84XG4 */
+SWITCHTEC_QUIRK(0x4068); /* PFX 68XG4 */
+SWITCHTEC_QUIRK(0x4052); /* PFX 52XG4 */
+SWITCHTEC_QUIRK(0x4036); /* PFX 36XG4 */
+SWITCHTEC_QUIRK(0x4028); /* PFX 28XG4 */
+SWITCHTEC_QUIRK(0x4100); /* PSX 100XG4 */
+SWITCHTEC_QUIRK(0x4184); /* PSX 84XG4 */
+SWITCHTEC_QUIRK(0x4168); /* PSX 68XG4 */
+SWITCHTEC_QUIRK(0x4152); /* PSX 52XG4 */
+SWITCHTEC_QUIRK(0x4136); /* PSX 36XG4 */
+SWITCHTEC_QUIRK(0x4128); /* PSX 28XG4 */
+SWITCHTEC_QUIRK(0x4200); /* PAX 100XG4 */
+SWITCHTEC_QUIRK(0x4284); /* PAX 84XG4 */
+SWITCHTEC_QUIRK(0x4268); /* PAX 68XG4 */
+SWITCHTEC_QUIRK(0x4252); /* PAX 52XG4 */
+SWITCHTEC_QUIRK(0x4236); /* PAX 36XG4 */
+SWITCHTEC_QUIRK(0x4228); /* PAX 28XG4 */
+SWITCHTEC_QUIRK(0x4352); /* PFXA 52XG4 */
+SWITCHTEC_QUIRK(0x4336); /* PFXA 36XG4 */
+SWITCHTEC_QUIRK(0x4328); /* PFXA 28XG4 */
+SWITCHTEC_QUIRK(0x4452); /* PSXA 52XG4 */
+SWITCHTEC_QUIRK(0x4436); /* PSXA 36XG4 */
+SWITCHTEC_QUIRK(0x4428); /* PSXA 28XG4 */
+SWITCHTEC_QUIRK(0x4552); /* PAXA 52XG4 */
+SWITCHTEC_QUIRK(0x4536); /* PAXA 36XG4 */
+SWITCHTEC_QUIRK(0x4528); /* PAXA 28XG4 */
+
+/*
+ * The PLX NTB uses devfn proxy IDs to move TLPs between NT endpoints.
+ * These IDs are used to forward responses to the originator on the other
+ * side of the NTB. Alias all possible IDs to the NTB to permit access when
+ * the IOMMU is turned on.
+ */
+static void quirk_plx_ntb_dma_alias(struct pci_dev *pdev)
+{
+ pci_info(pdev, "Setting PLX NTB proxy ID aliases\n");
+ /* PLX NTB may use all 256 devfns */
+ pci_add_dma_alias(pdev, 0, 256);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, 0x87b0, quirk_plx_ntb_dma_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, 0x87b1, quirk_plx_ntb_dma_alias);
+
+/*
+ * On Lenovo Thinkpad P50 SKUs with a Nvidia Quadro M1000M, the BIOS does
+ * not always reset the secondary Nvidia GPU between reboots if the system
+ * is configured to use Hybrid Graphics mode. This results in the GPU
+ * being left in whatever state it was in during the *previous* boot, which
+ * causes spurious interrupts from the GPU, which in turn causes us to
+ * disable the wrong IRQ and end up breaking the touchpad. Unsurprisingly,
+ * this also completely breaks nouveau.
+ *
+ * Luckily, it seems a simple reset of the Nvidia GPU brings it back to a
+ * clean state and fixes all these issues.
+ *
+ * When the machine is configured in Dedicated display mode, the issue
+ * doesn't occur. Fortunately the GPU advertises NoReset+ when in this
+ * mode, so we can detect that and avoid resetting it.
+ */
+static void quirk_reset_lenovo_thinkpad_p50_nvgpu(struct pci_dev *pdev)
+{
+ void __iomem *map;
+ int ret;
+
+ if (pdev->subsystem_vendor != PCI_VENDOR_ID_LENOVO ||
+ pdev->subsystem_device != 0x222e ||
+ !pci_reset_supported(pdev))
+ return;
+
+ if (pci_enable_device_mem(pdev))
+ return;
+
+ /*
+ * Based on nvkm_device_ctor() in
+ * drivers/gpu/drm/nouveau/nvkm/engine/device/base.c
+ */
+ map = pci_iomap(pdev, 0, 0x23000);
+ if (!map) {
+ pci_err(pdev, "Can't map MMIO space\n");
+ goto out_disable;
+ }
+
+ /*
+ * Make sure the GPU looks like it's been POSTed before resetting
+ * it.
+ */
+ if (ioread32(map + 0x2240c) & 0x2) {
+ pci_info(pdev, FW_BUG "GPU left initialized by EFI, resetting\n");
+ ret = pci_reset_bus(pdev);
+ if (ret < 0)
+ pci_err(pdev, "Failed to reset GPU: %d\n", ret);
+ }
+
+ iounmap(map);
+out_disable:
+ pci_disable_device(pdev);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, 0x13b1,
+ PCI_CLASS_DISPLAY_VGA, 8,
+ quirk_reset_lenovo_thinkpad_p50_nvgpu);
+
+/*
+ * Device [1b21:2142]
+ * When in D0, PME# doesn't get asserted when plugging USB 3.0 device.
+ */
+static void pci_fixup_no_d0_pme(struct pci_dev *dev)
+{
+ pci_info(dev, "PME# does not work under D0, disabling it\n");
+ dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme);
+
+/*
+ * Device 12d8:0x400e [OHCI] and 12d8:0x400f [EHCI]
+ *
+ * These devices advertise PME# support in all power states but don't
+ * reliably assert it.
+ *
+ * These devices also advertise MSI, but documentation (PI7C9X440SL.pdf)
+ * says "The MSI Function is not implemented on this device" in chapters
+ * 7.3.27, 7.3.29-7.3.31.
+ */
+static void pci_fixup_no_msi_no_pme(struct pci_dev *dev)
+{
+#ifdef CONFIG_PCI_MSI
+ pci_info(dev, "MSI is not implemented on this device, disabling it\n");
+ dev->no_msi = 1;
+#endif
+ pci_info(dev, "PME# is unreliable, disabling it\n");
+ dev->pme_support = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400e, pci_fixup_no_msi_no_pme);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400f, pci_fixup_no_msi_no_pme);
+
+static void apex_pci_fixup_class(struct pci_dev *pdev)
+{
+ pdev->class = (PCI_CLASS_SYSTEM_OTHER << 8) | pdev->class;
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
+ PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
+
+/*
+ * Pericom PI7C9X2G404/PI7C9X2G304/PI7C9X2G303 switch erratum E5 -
+ * ACS P2P Request Redirect is not functional
+ *
+ * When ACS P2P Request Redirect is enabled and bandwidth is not balanced
+ * between upstream and downstream ports, packets are queued in an internal
+ * buffer until CPLD packet. The workaround is to use the switch in store and
+ * forward mode.
+ */
+#define PI7C9X2Gxxx_MODE_REG 0x74
+#define PI7C9X2Gxxx_STORE_FORWARD_MODE BIT(0)
+static void pci_fixup_pericom_acs_store_forward(struct pci_dev *pdev)
+{
+ struct pci_dev *upstream;
+ u16 val;
+
+ /* Downstream ports only */
+ if (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM)
+ return;
+
+ /* Check for ACS P2P Request Redirect use */
+ if (!pdev->acs_cap)
+ return;
+ pci_read_config_word(pdev, pdev->acs_cap + PCI_ACS_CTRL, &val);
+ if (!(val & PCI_ACS_RR))
+ return;
+
+ upstream = pci_upstream_bridge(pdev);
+ if (!upstream)
+ return;
+
+ pci_read_config_word(upstream, PI7C9X2Gxxx_MODE_REG, &val);
+ if (!(val & PI7C9X2Gxxx_STORE_FORWARD_MODE)) {
+ pci_info(upstream, "Setting PI7C9X2Gxxx store-forward mode to avoid ACS erratum\n");
+ pci_write_config_word(upstream, PI7C9X2Gxxx_MODE_REG, val |
+ PI7C9X2Gxxx_STORE_FORWARD_MODE);
+ }
+}
+/*
+ * Apply fixup on enable and on resume, in order to apply the fix up whenever
+ * ACS configuration changes or switch mode is reset
+ */
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_PERICOM, 0x2404,
+ pci_fixup_pericom_acs_store_forward);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_PERICOM, 0x2404,
+ pci_fixup_pericom_acs_store_forward);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_PERICOM, 0x2304,
+ pci_fixup_pericom_acs_store_forward);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_PERICOM, 0x2304,
+ pci_fixup_pericom_acs_store_forward);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_PERICOM, 0x2303,
+ pci_fixup_pericom_acs_store_forward);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_PERICOM, 0x2303,
+ pci_fixup_pericom_acs_store_forward);
+
+static void nvidia_ion_ahci_fixup(struct pci_dev *pdev)
+{
+ pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);
+
+static void rom_bar_overlap_defect(struct pci_dev *dev)
+{
+ pci_info(dev, "working around ROM BAR overlap defect\n");
+ dev->rom_bar_overlap = 1;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1533, rom_bar_overlap_defect);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1536, rom_bar_overlap_defect);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1537, rom_bar_overlap_defect);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1538, rom_bar_overlap_defect);
+
+#ifdef CONFIG_PCIEASPM
+/*
+ * Several Intel DG2 graphics devices advertise that they can only tolerate
+ * 1us latency when transitioning from L1 to L0, which may prevent ASPM L1
+ * from being enabled. But in fact these devices can tolerate unlimited
+ * latency. Override their Device Capabilities value to allow ASPM L1 to
+ * be enabled.
+ */
+static void aspm_l1_acceptable_latency(struct pci_dev *dev)
+{
+ u32 l1_lat = FIELD_GET(PCI_EXP_DEVCAP_L1, dev->devcap);
+
+ if (l1_lat < 7) {
+ dev->devcap |= FIELD_PREP(PCI_EXP_DEVCAP_L1, 7);
+ pci_info(dev, "ASPM: overriding L1 acceptable latency from %#x to 0x7\n",
+ l1_lat);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f80, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f81, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f82, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f83, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f84, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f85, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f86, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f87, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f88, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5690, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5691, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5692, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5693, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5694, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5695, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a0, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a1, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a2, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a3, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a4, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a5, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a6, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56b0, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56b1, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56c0, aspm_l1_acceptable_latency);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56c1, aspm_l1_acceptable_latency);
+#endif
+
+#ifdef CONFIG_PCIE_DPC
+/*
+ * Intel Ice Lake, Tiger Lake and Alder Lake BIOS has a bug that clears
+ * the DPC RP PIO Log Size of the integrated Thunderbolt PCIe Root
+ * Ports.
+ */
+static void dpc_log_size(struct pci_dev *dev)
+{
+ u16 dpc, val;
+
+ dpc = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC);
+ if (!dpc)
+ return;
+
+ pci_read_config_word(dev, dpc + PCI_EXP_DPC_CAP, &val);
+ if (!(val & PCI_EXP_DPC_CAP_RP_EXT))
+ return;
+
+ if (!((val & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8)) {
+ pci_info(dev, "Overriding RP PIO Log Size to 4\n");
+ dev->dpc_rp_log_size = 4;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x461f, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x462f, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x463f, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x466e, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8a1d, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8a1f, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8a21, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8a23, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a23, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a25, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a27, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a29, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2b, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2d, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2f, dpc_log_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a31, dpc_log_size);
+#endif
+
+/*
+ * Devices known to require a longer delay before first config space access
+ * after reset recovery or resume from D3cold:
+ *
+ * VideoPropulsion (aka Genroco) Torrent QN16e MPEG QAM Modulator
+ */
+static void pci_fixup_d3cold_delay_1sec(struct pci_dev *pdev)
+{
+ pdev->d3cold_delay = 1000;
+}
+DECLARE_PCI_FIXUP_FINAL(0x5555, 0x0004, pci_fixup_d3cold_delay_1sec);