diff options
Diffstat (limited to 'drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c')
| -rw-r--r-- | drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c | 417 |
1 files changed, 417 insertions, 0 deletions
diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c new file mode 100644 index 000000000..36ad02c33 --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2017 Broadcom + +#include <linux/delay.h> +#include <linux/extcon-provider.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/irq.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#define ICFG_DRD_AFE 0x0 +#define ICFG_MISC_STAT 0x18 +#define ICFG_DRD_P0CTL 0x1C +#define ICFG_STRAP_CTRL 0x20 +#define ICFG_FSM_CTRL 0x24 + +#define ICFG_DEV_BIT BIT(2) +#define IDM_RST_BIT BIT(0) +#define AFE_CORERDY_VDDC BIT(18) +#define PHY_PLL_RESETB BIT(15) +#define PHY_RESETB BIT(14) +#define PHY_PLL_LOCK BIT(0) + +#define DRD_DEV_MODE BIT(20) +#define OHCI_OVRCUR_POL BIT(11) +#define ICFG_OFF_MODE BIT(6) +#define PLL_LOCK_RETRY 1000 + +#define EVT_DEVICE 0 +#define EVT_HOST 1 + +#define DRD_HOST_MODE (BIT(2) | BIT(3)) +#define DRD_DEVICE_MODE (BIT(4) | BIT(5)) +#define DRD_HOST_VAL 0x803 +#define DRD_DEV_VAL 0x807 +#define GPIO_DELAY 20 + +struct ns2_phy_data; +struct ns2_phy_driver { + void __iomem *icfgdrd_regs; + void __iomem *idmdrd_rst_ctrl; + void __iomem *crmu_usb2_ctrl; + void __iomem *usb2h_strap_reg; + struct ns2_phy_data *data; + struct extcon_dev *edev; + struct gpio_desc *vbus_gpiod; + struct gpio_desc *id_gpiod; + int id_irq; + int vbus_irq; + unsigned long debounce_jiffies; + struct delayed_work wq_extcon; +}; + +struct ns2_phy_data { + struct ns2_phy_driver *driver; + struct phy *phy; + int new_state; +}; + +static const unsigned int usb_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, +}; + +static inline int pll_lock_stat(u32 usb_reg, int reg_mask, + struct ns2_phy_driver *driver) +{ + u32 val; + + return readl_poll_timeout_atomic(driver->icfgdrd_regs + usb_reg, + val, (val & reg_mask), 1, + PLL_LOCK_RETRY); +} + +static int ns2_drd_phy_init(struct phy *phy) +{ + struct ns2_phy_data *data = phy_get_drvdata(phy); + struct ns2_phy_driver *driver = data->driver; + u32 val; + + val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL); + + if (data->new_state == EVT_HOST) { + val &= ~DRD_DEVICE_MODE; + val |= DRD_HOST_MODE; + } else { + val &= ~DRD_HOST_MODE; + val |= DRD_DEVICE_MODE; + } + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + return 0; +} + +static int ns2_drd_phy_poweroff(struct phy *phy) +{ + struct ns2_phy_data *data = phy_get_drvdata(phy); + struct ns2_phy_driver *driver = data->driver; + u32 val; + + val = readl(driver->crmu_usb2_ctrl); + val &= ~AFE_CORERDY_VDDC; + writel(val, driver->crmu_usb2_ctrl); + + val = readl(driver->crmu_usb2_ctrl); + val &= ~DRD_DEV_MODE; + writel(val, driver->crmu_usb2_ctrl); + + /* Disable Host and Device Mode */ + val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL); + val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE | ICFG_OFF_MODE); + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + return 0; +} + +static int ns2_drd_phy_poweron(struct phy *phy) +{ + struct ns2_phy_data *data = phy_get_drvdata(phy); + struct ns2_phy_driver *driver = data->driver; + u32 extcon_event = data->new_state; + int ret; + u32 val; + + if (extcon_event == EVT_DEVICE) { + writel(DRD_DEV_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL); + + val = readl(driver->idmdrd_rst_ctrl); + val &= ~IDM_RST_BIT; + writel(val, driver->idmdrd_rst_ctrl); + + val = readl(driver->crmu_usb2_ctrl); + val |= (AFE_CORERDY_VDDC | DRD_DEV_MODE); + writel(val, driver->crmu_usb2_ctrl); + + /* Bring PHY and PHY_PLL out of Reset */ + val = readl(driver->crmu_usb2_ctrl); + val |= (PHY_PLL_RESETB | PHY_RESETB); + writel(val, driver->crmu_usb2_ctrl); + + ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver); + if (ret < 0) { + dev_err(&phy->dev, "Phy PLL lock failed\n"); + return ret; + } + } else { + writel(DRD_HOST_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL); + + val = readl(driver->crmu_usb2_ctrl); + val |= AFE_CORERDY_VDDC; + writel(val, driver->crmu_usb2_ctrl); + + ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver); + if (ret < 0) { + dev_err(&phy->dev, "Phy PLL lock failed\n"); + return ret; + } + + val = readl(driver->idmdrd_rst_ctrl); + val &= ~IDM_RST_BIT; + writel(val, driver->idmdrd_rst_ctrl); + + /* port over current Polarity */ + val = readl(driver->usb2h_strap_reg); + val |= OHCI_OVRCUR_POL; + writel(val, driver->usb2h_strap_reg); + } + + return 0; +} + +static void connect_change(struct ns2_phy_driver *driver) +{ + u32 extcon_event; + u32 val; + + extcon_event = driver->data->new_state; + val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL); + + switch (extcon_event) { + case EVT_DEVICE: + val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE); + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + val = (val & ~DRD_HOST_MODE) | DRD_DEVICE_MODE; + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL); + val |= ICFG_DEV_BIT; + writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL); + break; + + case EVT_HOST: + val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE); + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + val = (val & ~DRD_DEVICE_MODE) | DRD_HOST_MODE; + writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL); + + val = readl(driver->usb2h_strap_reg); + val |= OHCI_OVRCUR_POL; + writel(val, driver->usb2h_strap_reg); + + val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL); + val &= ~ICFG_DEV_BIT; + writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL); + break; + + default: + pr_err("Invalid extcon event\n"); + break; + } +} + +static void extcon_work(struct work_struct *work) +{ + struct ns2_phy_driver *driver; + int vbus; + int id; + + driver = container_of(to_delayed_work(work), + struct ns2_phy_driver, wq_extcon); + + id = gpiod_get_value_cansleep(driver->id_gpiod); + vbus = gpiod_get_value_cansleep(driver->vbus_gpiod); + + if (!id && vbus) { /* Host connected */ + extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, true); + pr_debug("Host cable connected\n"); + driver->data->new_state = EVT_HOST; + connect_change(driver); + } else if (id && !vbus) { /* Disconnected */ + extcon_set_state_sync(driver->edev, EXTCON_USB_HOST, false); + extcon_set_state_sync(driver->edev, EXTCON_USB, false); + pr_debug("Cable disconnected\n"); + } else if (id && vbus) { /* Device connected */ + extcon_set_state_sync(driver->edev, EXTCON_USB, true); + pr_debug("Device cable connected\n"); + driver->data->new_state = EVT_DEVICE; + connect_change(driver); + } +} + +static irqreturn_t gpio_irq_handler(int irq, void *dev_id) +{ + struct ns2_phy_driver *driver = dev_id; + + queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon, + driver->debounce_jiffies); + + return IRQ_HANDLED; +} + +static const struct phy_ops ops = { + .init = ns2_drd_phy_init, + .power_on = ns2_drd_phy_poweron, + .power_off = ns2_drd_phy_poweroff, + .owner = THIS_MODULE, +}; + +static const struct of_device_id ns2_drd_phy_dt_ids[] = { + { .compatible = "brcm,ns2-drd-phy", }, + { } +}; +MODULE_DEVICE_TABLE(of, ns2_drd_phy_dt_ids); + +static int ns2_drd_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct ns2_phy_driver *driver; + struct ns2_phy_data *data; + int ret; + u32 val; + + driver = devm_kzalloc(dev, sizeof(struct ns2_phy_driver), + GFP_KERNEL); + if (!driver) + return -ENOMEM; + + driver->data = devm_kzalloc(dev, sizeof(struct ns2_phy_data), + GFP_KERNEL); + if (!driver->data) + return -ENOMEM; + + driver->icfgdrd_regs = devm_platform_ioremap_resource_byname(pdev, "icfg"); + if (IS_ERR(driver->icfgdrd_regs)) + return PTR_ERR(driver->icfgdrd_regs); + + driver->idmdrd_rst_ctrl = devm_platform_ioremap_resource_byname(pdev, "rst-ctrl"); + if (IS_ERR(driver->idmdrd_rst_ctrl)) + return PTR_ERR(driver->idmdrd_rst_ctrl); + + driver->crmu_usb2_ctrl = devm_platform_ioremap_resource_byname(pdev, "crmu-ctrl"); + if (IS_ERR(driver->crmu_usb2_ctrl)) + return PTR_ERR(driver->crmu_usb2_ctrl); + + driver->usb2h_strap_reg = devm_platform_ioremap_resource_byname(pdev, "usb2-strap"); + if (IS_ERR(driver->usb2h_strap_reg)) + return PTR_ERR(driver->usb2h_strap_reg); + + /* create extcon */ + driver->id_gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN); + if (IS_ERR(driver->id_gpiod)) { + dev_err(dev, "failed to get ID GPIO\n"); + return PTR_ERR(driver->id_gpiod); + } + driver->vbus_gpiod = devm_gpiod_get(&pdev->dev, "vbus", GPIOD_IN); + if (IS_ERR(driver->vbus_gpiod)) { + dev_err(dev, "failed to get VBUS GPIO\n"); + return PTR_ERR(driver->vbus_gpiod); + } + + driver->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable); + if (IS_ERR(driver->edev)) { + dev_err(dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + + ret = devm_extcon_dev_register(dev, driver->edev); + if (ret < 0) { + dev_err(dev, "failed to register extcon device\n"); + return ret; + } + + ret = gpiod_set_debounce(driver->id_gpiod, GPIO_DELAY * 1000); + if (ret < 0) + driver->debounce_jiffies = msecs_to_jiffies(GPIO_DELAY); + + INIT_DELAYED_WORK(&driver->wq_extcon, extcon_work); + + driver->id_irq = gpiod_to_irq(driver->id_gpiod); + if (driver->id_irq < 0) { + dev_err(dev, "failed to get ID IRQ\n"); + return driver->id_irq; + } + + driver->vbus_irq = gpiod_to_irq(driver->vbus_gpiod); + if (driver->vbus_irq < 0) { + dev_err(dev, "failed to get ID IRQ\n"); + return driver->vbus_irq; + } + + ret = devm_request_irq(dev, driver->id_irq, gpio_irq_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "usb_id", driver); + if (ret < 0) { + dev_err(dev, "failed to request handler for ID IRQ\n"); + return ret; + } + + ret = devm_request_irq(dev, driver->vbus_irq, gpio_irq_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "usb_vbus", driver); + if (ret < 0) { + dev_err(dev, "failed to request handler for VBUS IRQ\n"); + return ret; + } + + dev_set_drvdata(dev, driver); + + /* Shutdown all ports. They can be powered up as required */ + val = readl(driver->crmu_usb2_ctrl); + val &= ~(AFE_CORERDY_VDDC | PHY_RESETB); + writel(val, driver->crmu_usb2_ctrl); + + data = driver->data; + data->phy = devm_phy_create(dev, dev->of_node, &ops); + if (IS_ERR(data->phy)) { + dev_err(dev, "Failed to create usb drd phy\n"); + return PTR_ERR(data->phy); + } + + data->driver = driver; + phy_set_drvdata(data->phy, data); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "Failed to register as phy provider\n"); + return PTR_ERR(phy_provider); + } + + platform_set_drvdata(pdev, driver); + + dev_info(dev, "Registered NS2 DRD Phy device\n"); + queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon, + driver->debounce_jiffies); + + return 0; +} + +static struct platform_driver ns2_drd_phy_driver = { + .probe = ns2_drd_phy_probe, + .driver = { + .name = "bcm-ns2-usbphy", + .of_match_table = of_match_ptr(ns2_drd_phy_dt_ids), + }, +}; +module_platform_driver(ns2_drd_phy_driver); + +MODULE_ALIAS("platform:bcm-ns2-drd-phy"); +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Broadcom NS2 USB2 PHY driver"); +MODULE_LICENSE("GPL v2"); |