diff options
Diffstat (limited to 'drivers/scsi/aic7xxx/aic7xxx.reg')
| -rw-r--r-- | drivers/scsi/aic7xxx/aic7xxx.reg | 1761 |
1 files changed, 1761 insertions, 0 deletions
diff --git a/drivers/scsi/aic7xxx/aic7xxx.reg b/drivers/scsi/aic7xxx/aic7xxx.reg new file mode 100644 index 000000000..00fde2243 --- /dev/null +++ b/drivers/scsi/aic7xxx/aic7xxx.reg @@ -0,0 +1,1761 @@ +/* + * Aic7xxx register and scratch ram definitions. + * + * Copyright (c) 1994-2001 Justin T. Gibbs. + * Copyright (c) 2000-2001 Adaptec Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * $FreeBSD$ + */ +VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic7xxx.reg#40 $" + +/* + * This file is processed by the aic7xxx_asm utility for use in assembling + * firmware for the aic7xxx family of SCSI host adapters as well as to generate + * a C header file for use in the kernel portion of the Aic7xxx driver. + * + * All page numbers refer to the Adaptec AIC-7770 Data Book available from + * Adaptec's Technical Documents Department 1-800-934-2766 + */ + +/* + * Registers marked "dont_generate_debug_code" are not (yet) referenced + * from the driver code, and this keyword inhibit generation + * of debug code for them. + * + * REG_PRETTY_PRINT config will complain if dont_generate_debug_code + * is added to the register which is referenced in the driver. + * Unreferenced register with no dont_generate_debug_code will result + * in dead code. No warning is issued. + */ + +/* + * SCSI Sequence Control (p. 3-11). + * Each bit, when set starts a specific SCSI sequence on the bus + */ +register SCSISEQ { + address 0x000 + access_mode RW + field TEMODE 0x80 + field ENSELO 0x40 + field ENSELI 0x20 + field ENRSELI 0x10 + field ENAUTOATNO 0x08 + field ENAUTOATNI 0x04 + field ENAUTOATNP 0x02 + field SCSIRSTO 0x01 +} + +/* + * SCSI Transfer Control 0 Register (pp. 3-13). + * Controls the SCSI module data path. + */ +register SXFRCTL0 { + address 0x001 + access_mode RW + field DFON 0x80 + field DFPEXP 0x40 + field FAST20 0x20 + field CLRSTCNT 0x10 + field SPIOEN 0x08 + field SCAMEN 0x04 + field CLRCHN 0x02 +} + +/* + * SCSI Transfer Control 1 Register (pp. 3-14,15). + * Controls the SCSI module data path. + */ +register SXFRCTL1 { + address 0x002 + access_mode RW + field BITBUCKET 0x80 + field SWRAPEN 0x40 + field ENSPCHK 0x20 + mask STIMESEL 0x18 + field ENSTIMER 0x04 + field ACTNEGEN 0x02 + field STPWEN 0x01 /* Powered Termination */ + dont_generate_debug_code +} + +/* + * SCSI Control Signal Read Register (p. 3-15). + * Reads the actual state of the SCSI bus pins + */ +register SCSISIGI { + address 0x003 + access_mode RO + field CDI 0x80 + field IOI 0x40 + field MSGI 0x20 + field ATNI 0x10 + field SELI 0x08 + field BSYI 0x04 + field REQI 0x02 + field ACKI 0x01 +/* + * Possible phases in SCSISIGI + */ + mask PHASE_MASK CDI|IOI|MSGI + mask P_DATAOUT 0x00 + mask P_DATAIN IOI + mask P_DATAOUT_DT P_DATAOUT|MSGI + mask P_DATAIN_DT P_DATAIN|MSGI + mask P_COMMAND CDI + mask P_MESGOUT CDI|MSGI + mask P_STATUS CDI|IOI + mask P_MESGIN CDI|IOI|MSGI +} + +/* + * SCSI Control Signal Write Register (p. 3-16). + * Writing to this register modifies the control signals on the bus. Only + * those signals that are allowed in the current mode (Initiator/Target) are + * asserted. + */ +register SCSISIGO { + address 0x003 + access_mode WO + field CDO 0x80 + field IOO 0x40 + field MSGO 0x20 + field ATNO 0x10 + field SELO 0x08 + field BSYO 0x04 + field REQO 0x02 + field ACKO 0x01 +/* + * Possible phases to write into SCSISIG0 + */ + mask PHASE_MASK CDI|IOI|MSGI + mask P_DATAOUT 0x00 + mask P_DATAIN IOI + mask P_COMMAND CDI + mask P_MESGOUT CDI|MSGI + mask P_STATUS CDI|IOI + mask P_MESGIN CDI|IOI|MSGI + dont_generate_debug_code +} + +/* + * SCSI Rate Control (p. 3-17). + * Contents of this register determine the Synchronous SCSI data transfer + * rate and the maximum synchronous Req/Ack offset. An offset of 0 in the + * SOFS (3:0) bits disables synchronous data transfers. Any offset value + * greater than 0 enables synchronous transfers. + */ +register SCSIRATE { + address 0x004 + access_mode RW + field WIDEXFER 0x80 /* Wide transfer control */ + field ENABLE_CRC 0x40 /* CRC for D-Phases */ + field SINGLE_EDGE 0x10 /* Disable DT Transfers */ + mask SXFR 0x70 /* Sync transfer rate */ + mask SXFR_ULTRA2 0x0f /* Sync transfer rate */ + mask SOFS 0x0f /* Sync offset */ +} + +/* + * SCSI ID (p. 3-18). + * Contains the ID of the board and the current target on the + * selected channel. + */ +register SCSIID { + address 0x005 + access_mode RW + mask TID 0xf0 /* Target ID mask */ + mask TWIN_TID 0x70 + field TWIN_CHNLB 0x80 + mask OID 0x0f /* Our ID mask */ + /* + * SCSI Maximum Offset (p. 4-61 aic7890/91 Data Book) + * The aic7890/91 allow an offset of up to 127 transfers in both wide + * and narrow mode. + */ + alias SCSIOFFSET + mask SOFS_ULTRA2 0x7f /* Sync offset U2 chips */ + dont_generate_debug_code +} + +/* + * SCSI Latched Data (p. 3-19). + * Read/Write latches used to transfer data on the SCSI bus during + * Automatic or Manual PIO mode. SCSIDATH can be used for the + * upper byte of a 16bit wide asynchronouse data phase transfer. + */ +register SCSIDATL { + address 0x006 + access_mode RW + dont_generate_debug_code +} + +register SCSIDATH { + address 0x007 + access_mode RW +} + +/* + * SCSI Transfer Count (pp. 3-19,20) + * These registers count down the number of bytes transferred + * across the SCSI bus. The counter is decremented only once + * the data has been safely transferred. SDONE in SSTAT0 is + * set when STCNT goes to 0 + */ +register STCNT { + address 0x008 + size 3 + access_mode RW + dont_generate_debug_code +} + +/* ALT_MODE registers (Ultra2 and Ultra160 chips) */ +register SXFRCTL2 { + address 0x013 + access_mode RW + field AUTORSTDIS 0x10 + field CMDDMAEN 0x08 + mask ASYNC_SETUP 0x07 +} + +/* ALT_MODE register on Ultra160 chips */ +register OPTIONMODE { + address 0x008 + access_mode RW + count 2 + field AUTORATEEN 0x80 + field AUTOACKEN 0x40 + field ATNMGMNTEN 0x20 + field BUSFREEREV 0x10 + field EXPPHASEDIS 0x08 + field SCSIDATL_IMGEN 0x04 + field AUTO_MSGOUT_DE 0x02 + field DIS_MSGIN_DUALEDGE 0x01 + mask OPTIONMODE_DEFAULTS AUTO_MSGOUT_DE|DIS_MSGIN_DUALEDGE + dont_generate_debug_code +} + +/* ALT_MODE register on Ultra160 chips */ +register TARGCRCCNT { + address 0x00a + size 2 + access_mode RW + count 2 + dont_generate_debug_code +} + +/* + * Clear SCSI Interrupt 0 (p. 3-20) + * Writing a 1 to a bit clears the associated SCSI Interrupt in SSTAT0. + */ +register CLRSINT0 { + address 0x00b + access_mode WO + field CLRSELDO 0x40 + field CLRSELDI 0x20 + field CLRSELINGO 0x10 + field CLRSWRAP 0x08 + field CLRIOERR 0x08 /* Ultra2 Only */ + field CLRSPIORDY 0x02 + dont_generate_debug_code +} + +/* + * SCSI Status 0 (p. 3-21) + * Contains one set of SCSI Interrupt codes + * These are most likely of interest to the sequencer + */ +register SSTAT0 { + address 0x00b + access_mode RO + field TARGET 0x80 /* Board acting as target */ + field SELDO 0x40 /* Selection Done */ + field SELDI 0x20 /* Board has been selected */ + field SELINGO 0x10 /* Selection In Progress */ + field SWRAP 0x08 /* 24bit counter wrap */ + field IOERR 0x08 /* LVD Tranceiver mode changed */ + field SDONE 0x04 /* STCNT = 0x000000 */ + field SPIORDY 0x02 /* SCSI PIO Ready */ + field DMADONE 0x01 /* DMA transfer completed */ +} + +/* + * Clear SCSI Interrupt 1 (p. 3-23) + * Writing a 1 to a bit clears the associated SCSI Interrupt in SSTAT1. + */ +register CLRSINT1 { + address 0x00c + access_mode WO + field CLRSELTIMEO 0x80 + field CLRATNO 0x40 + field CLRSCSIRSTI 0x20 + field CLRBUSFREE 0x08 + field CLRSCSIPERR 0x04 + field CLRPHASECHG 0x02 + field CLRREQINIT 0x01 + dont_generate_debug_code +} + +/* + * SCSI Status 1 (p. 3-24) + */ +register SSTAT1 { + address 0x00c + access_mode RO + field SELTO 0x80 + field ATNTARG 0x40 + field SCSIRSTI 0x20 + field PHASEMIS 0x10 + field BUSFREE 0x08 + field SCSIPERR 0x04 + field PHASECHG 0x02 + field REQINIT 0x01 +} + +/* + * SCSI Status 2 (pp. 3-25,26) + */ +register SSTAT2 { + address 0x00d + access_mode RO + field OVERRUN 0x80 + field SHVALID 0x40 /* Shadow Layer non-zero */ + field EXP_ACTIVE 0x10 /* SCSI Expander Active */ + field CRCVALERR 0x08 /* CRC doesn't match (U3 only) */ + field CRCENDERR 0x04 /* No terminal CRC packet (U3 only) */ + field CRCREQERR 0x02 /* Illegal CRC packet req (U3 only) */ + field DUAL_EDGE_ERR 0x01 /* Incorrect data phase (U3 only) */ + mask SFCNT 0x1f +} + +/* + * SCSI Status 3 (p. 3-26) + */ +register SSTAT3 { + address 0x00e + access_mode RO + count 2 + mask SCSICNT 0xf0 + mask OFFCNT 0x0f + mask U2OFFCNT 0x7f +} + +/* + * SCSI ID for the aic7890/91 chips + */ +register SCSIID_ULTRA2 { + address 0x00f + access_mode RW + mask TID 0xf0 /* Target ID mask */ + mask OID 0x0f /* Our ID mask */ + dont_generate_debug_code +} + +/* + * SCSI Interrupt Mode 1 (p. 3-28) + * Setting any bit will enable the corresponding function + * in SIMODE0 to interrupt via the IRQ pin. + */ +register SIMODE0 { + address 0x010 + access_mode RW + count 2 + field ENSELDO 0x40 + field ENSELDI 0x20 + field ENSELINGO 0x10 + field ENSWRAP 0x08 + field ENIOERR 0x08 /* LVD Tranceiver mode changes */ + field ENSDONE 0x04 + field ENSPIORDY 0x02 + field ENDMADONE 0x01 +} + +/* + * SCSI Interrupt Mode 1 (pp. 3-28,29) + * Setting any bit will enable the corresponding function + * in SIMODE1 to interrupt via the IRQ pin. + */ +register SIMODE1 { + address 0x011 + access_mode RW + field ENSELTIMO 0x80 + field ENATNTARG 0x40 + field ENSCSIRST 0x20 + field ENPHASEMIS 0x10 + field ENBUSFREE 0x08 + field ENSCSIPERR 0x04 + field ENPHASECHG 0x02 + field ENREQINIT 0x01 +} + +/* + * SCSI Data Bus (High) (p. 3-29) + * This register reads data on the SCSI Data bus directly. + */ +register SCSIBUSL { + address 0x012 + access_mode RW +} + +register SCSIBUSH { + address 0x013 + access_mode RW +} + +/* + * SCSI/Host Address (p. 3-30) + * These registers hold the host address for the byte about to be + * transferred on the SCSI bus. They are counted up in the same + * manner as STCNT is counted down. SHADDR should always be used + * to determine the address of the last byte transferred since HADDR + * can be skewed by write ahead. + */ +register SHADDR { + address 0x014 + size 4 + access_mode RO + dont_generate_debug_code +} + +/* + * Selection Timeout Timer (p. 3-30) + */ +register SELTIMER { + address 0x018 + access_mode RW + count 1 + field STAGE6 0x20 + field STAGE5 0x10 + field STAGE4 0x08 + field STAGE3 0x04 + field STAGE2 0x02 + field STAGE1 0x01 + alias TARGIDIN + dont_generate_debug_code +} + +/* + * Selection/Reselection ID (p. 3-31) + * Upper four bits are the device id. The ONEBIT is set when the re/selecting + * device did not set its own ID. + */ +register SELID { + address 0x019 + access_mode RW + mask SELID_MASK 0xf0 + field ONEBIT 0x08 + dont_generate_debug_code +} + +register SCAMCTL { + address 0x01a + access_mode RW + field ENSCAMSELO 0x80 + field CLRSCAMSELID 0x40 + field ALTSTIM 0x20 + field DFLTTID 0x10 + mask SCAMLVL 0x03 +} + +/* + * Target Mode Selecting in ID bitmask (aic7890/91/96/97) + */ +register TARGID { + address 0x01b + size 2 + access_mode RW + count 14 + dont_generate_debug_code +} + +/* + * Serial Port I/O Cabability register (p. 4-95 aic7860 Data Book) + * Indicates if external logic has been attached to the chip to + * perform the tasks of accessing a serial eeprom, testing termination + * strength, and performing cable detection. On the aic7860, most of + * these features are handled on chip, but on the aic7855 an attached + * aic3800 does the grunt work. + */ +register SPIOCAP { + address 0x01b + access_mode RW + count 10 + field SOFT1 0x80 + field SOFT0 0x40 + field SOFTCMDEN 0x20 + field EXT_BRDCTL 0x10 /* External Board control */ + field SEEPROM 0x08 /* External serial eeprom logic */ + field EEPROM 0x04 /* Writable external BIOS ROM */ + field ROM 0x02 /* Logic for accessing external ROM */ + field SSPIOCPS 0x01 /* Termination and cable detection */ + dont_generate_debug_code +} + +register BRDCTL { + address 0x01d + count 11 + field BRDDAT7 0x80 + field BRDDAT6 0x40 + field BRDDAT5 0x20 + field BRDSTB 0x10 + field BRDCS 0x08 + field BRDRW 0x04 + field BRDCTL1 0x02 + field BRDCTL0 0x01 + /* 7890 Definitions */ + field BRDDAT4 0x10 + field BRDDAT3 0x08 + field BRDDAT2 0x04 + field BRDRW_ULTRA2 0x02 + field BRDSTB_ULTRA2 0x01 + dont_generate_debug_code +} + +/* + * Serial EEPROM Control (p. 4-92 in 7870 Databook) + * Controls the reading and writing of an external serial 1-bit + * EEPROM Device. In order to access the serial EEPROM, you must + * first set the SEEMS bit that generates a request to the memory + * port for access to the serial EEPROM device. When the memory + * port is not busy servicing another request, it reconfigures + * to allow access to the serial EEPROM. When this happens, SEERDY + * gets set high to verify that the memory port access has been + * granted. + * + * After successful arbitration for the memory port, the SEECS bit of + * the SEECTL register is connected to the chip select. The SEECK, + * SEEDO, and SEEDI are connected to the clock, data out, and data in + * lines respectively. The SEERDY bit of SEECTL is useful in that it + * gives us an 800 nsec timer. After a write to the SEECTL register, + * the SEERDY goes high 800 nsec later. The one exception to this is + * when we first request access to the memory port. The SEERDY goes + * high to signify that access has been granted and, for this case, has + * no implied timing. + * + * See 93cx6.c for detailed information on the protocol necessary to + * read the serial EEPROM. + */ +register SEECTL { + address 0x01e + count 11 + field EXTARBACK 0x80 + field EXTARBREQ 0x40 + field SEEMS 0x20 + field SEERDY 0x10 + field SEECS 0x08 + field SEECK 0x04 + field SEEDO 0x02 + field SEEDI 0x01 + dont_generate_debug_code +} +/* + * SCSI Block Control (p. 3-32) + * Controls Bus type and channel selection. In a twin channel configuration + * addresses 0x00-0x1e are gated to the appropriate channel based on this + * register. SELWIDE allows for the coexistence of 8bit and 16bit devices + * on a wide bus. + */ +register SBLKCTL { + address 0x01f + access_mode RW + field DIAGLEDEN 0x80 /* Aic78X0 only */ + field DIAGLEDON 0x40 /* Aic78X0 only */ + field AUTOFLUSHDIS 0x20 + field SELBUSB 0x08 + field ENAB40 0x08 /* LVD transceiver active */ + field ENAB20 0x04 /* SE/HVD transceiver active */ + field SELWIDE 0x02 + field XCVR 0x01 /* External transceiver active */ +} + +/* + * Sequencer Control (p. 3-33) + * Error detection mode and speed configuration + */ +register SEQCTL { + address 0x060 + access_mode RW + count 15 + field PERRORDIS 0x80 + field PAUSEDIS 0x40 + field FAILDIS 0x20 + field FASTMODE 0x10 + field BRKADRINTEN 0x08 + field STEP 0x04 + field SEQRESET 0x02 + field LOADRAM 0x01 +} + +/* + * Sequencer RAM Data (p. 3-34) + * Single byte window into the Scratch Ram area starting at the address + * specified by SEQADDR0 and SEQADDR1. To write a full word, simply write + * four bytes in succession. The SEQADDRs will increment after the most + * significant byte is written + */ +register SEQRAM { + address 0x061 + access_mode RW + count 2 + dont_generate_debug_code +} + +/* + * Sequencer Address Registers (p. 3-35) + * Only the first bit of SEQADDR1 holds addressing information + */ +register SEQADDR0 { + address 0x062 + access_mode RW + dont_generate_debug_code +} + +register SEQADDR1 { + address 0x063 + access_mode RW + count 8 + mask SEQADDR1_MASK 0x01 + dont_generate_debug_code +} + +/* + * Accumulator + * We cheat by passing arguments in the Accumulator up to the kernel driver + */ +register ACCUM { + address 0x064 + access_mode RW + accumulator + dont_generate_debug_code +} + +register SINDEX { + address 0x065 + access_mode RW + sindex + dont_generate_debug_code +} + +register DINDEX { + address 0x066 + access_mode RW + dont_generate_debug_code +} + +register ALLONES { + address 0x069 + access_mode RO + allones + dont_generate_debug_code +} + +register ALLZEROS { + address 0x06a + access_mode RO + allzeros + dont_generate_debug_code +} + +register NONE { + address 0x06a + access_mode WO + none + dont_generate_debug_code +} + +register FLAGS { + address 0x06b + access_mode RO + count 18 + field ZERO 0x02 + field CARRY 0x01 + dont_generate_debug_code +} + +register SINDIR { + address 0x06c + access_mode RO + dont_generate_debug_code +} + +register DINDIR { + address 0x06d + access_mode WO + dont_generate_debug_code +} + +register FUNCTION1 { + address 0x06e + access_mode RW +} + +register STACK { + address 0x06f + access_mode RO + count 5 + dont_generate_debug_code +} + +const STACK_SIZE 4 + +/* + * Board Control (p. 3-43) + */ +register BCTL { + address 0x084 + access_mode RW + field ACE 0x08 + field ENABLE 0x01 +} + +/* + * On the aic78X0 chips, Board Control is replaced by the DSCommand + * register (p. 4-64) + */ +register DSCOMMAND0 { + address 0x084 + access_mode RW + count 7 + field CACHETHEN 0x80 /* Cache Threshold enable */ + field DPARCKEN 0x40 /* Data Parity Check Enable */ + field MPARCKEN 0x20 /* Memory Parity Check Enable */ + field EXTREQLCK 0x10 /* External Request Lock */ + /* aic7890/91/96/97 only */ + field INTSCBRAMSEL 0x08 /* Internal SCB RAM Select */ + field RAMPS 0x04 /* External SCB RAM Present */ + field USCBSIZE32 0x02 /* Use 32byte SCB Page Size */ + field CIOPARCKEN 0x01 /* Internal bus parity error enable */ + dont_generate_debug_code +} + +register DSCOMMAND1 { + address 0x085 + access_mode RW + mask DSLATT 0xfc /* PCI latency timer (non-ultra2) */ + field HADDLDSEL1 0x02 /* Host Address Load Select Bits */ + field HADDLDSEL0 0x01 + dont_generate_debug_code +} + +/* + * Bus On/Off Time (p. 3-44) aic7770 only + */ +register BUSTIME { + address 0x085 + access_mode RW + count 2 + mask BOFF 0xf0 + mask BON 0x0f + dont_generate_debug_code +} + +/* + * Bus Speed (p. 3-45) aic7770 only + */ +register BUSSPD { + address 0x086 + access_mode RW + count 2 + mask DFTHRSH 0xc0 + mask STBOFF 0x38 + mask STBON 0x07 + mask DFTHRSH_100 0xc0 + mask DFTHRSH_75 0x80 + dont_generate_debug_code +} + +/* aic7850/55/60/70/80/95 only */ +register DSPCISTATUS { + address 0x086 + count 4 + mask DFTHRSH_100 0xc0 + dont_generate_debug_code +} + +/* aic7890/91/96/97 only */ +register HS_MAILBOX { + address 0x086 + mask HOST_MAILBOX 0xF0 + mask SEQ_MAILBOX 0x0F + mask HOST_TQINPOS 0x80 /* Boundary at either 0 or 128 */ + dont_generate_debug_code +} + +const HOST_MAILBOX_SHIFT 4 +const SEQ_MAILBOX_SHIFT 0 + +/* + * Host Control (p. 3-47) R/W + * Overall host control of the device. + */ +register HCNTRL { + address 0x087 + access_mode RW + count 14 + field POWRDN 0x40 + field SWINT 0x10 + field IRQMS 0x08 + field PAUSE 0x04 + field INTEN 0x02 + field CHIPRST 0x01 + field CHIPRSTACK 0x01 + dont_generate_debug_code +} + +/* + * Host Address (p. 3-48) + * This register contains the address of the byte about + * to be transferred across the host bus. + */ +register HADDR { + address 0x088 + size 4 + access_mode RW + dont_generate_debug_code +} + +register HCNT { + address 0x08c + size 3 + access_mode RW + dont_generate_debug_code +} + +/* + * SCB Pointer (p. 3-49) + * Gate one of the SCBs into the SCBARRAY window. + */ +register SCBPTR { + address 0x090 + access_mode RW + dont_generate_debug_code +} + +/* + * Interrupt Status (p. 3-50) + * Status for system interrupts + */ +register INTSTAT { + address 0x091 + access_mode RW + field BRKADRINT 0x08 + field SCSIINT 0x04 + field CMDCMPLT 0x02 + field SEQINT 0x01 + mask BAD_PHASE SEQINT /* unknown scsi bus phase */ + mask SEND_REJECT 0x10|SEQINT /* sending a message reject */ + mask PROTO_VIOLATION 0x20|SEQINT /* SCSI protocol violation */ + mask NO_MATCH 0x30|SEQINT /* no cmd match for reconnect */ + mask IGN_WIDE_RES 0x40|SEQINT /* Complex IGN Wide Res Msg */ + mask PDATA_REINIT 0x50|SEQINT /* + * Returned to data phase + * that requires data + * transfer pointers to be + * recalculated from the + * transfer residual. + */ + mask HOST_MSG_LOOP 0x60|SEQINT /* + * The bus is ready for the + * host to perform another + * message transaction. This + * mechanism is used for things + * like sync/wide negotiation + * that require a kernel based + * message state engine. + */ + mask BAD_STATUS 0x70|SEQINT /* Bad status from target */ + mask PERR_DETECTED 0x80|SEQINT /* + * Either the phase_lock + * or inb_next routine has + * noticed a parity error. + */ + mask DATA_OVERRUN 0x90|SEQINT /* + * Target attempted to write + * beyond the bounds of its + * command. + */ + mask MKMSG_FAILED 0xa0|SEQINT /* + * Target completed command + * without honoring our ATN + * request to issue a message. + */ + mask MISSED_BUSFREE 0xb0|SEQINT /* + * The sequencer never saw + * the bus go free after + * either a command complete + * or disconnect message. + */ + mask SCB_MISMATCH 0xc0|SEQINT /* + * Downloaded SCB's tag does + * not match the entry we + * intended to download. + */ + mask NO_FREE_SCB 0xd0|SEQINT /* + * get_free_or_disc_scb failed. + */ + mask OUT_OF_RANGE 0xe0|SEQINT + + mask SEQINT_MASK 0xf0|SEQINT /* SEQINT Status Codes */ + mask INT_PEND (BRKADRINT|SEQINT|SCSIINT|CMDCMPLT) + dont_generate_debug_code +} + +/* + * Hard Error (p. 3-53) + * Reporting of catastrophic errors. You usually cannot recover from + * these without a full board reset. + */ +register ERROR { + address 0x092 + access_mode RO + count 26 + field CIOPARERR 0x80 /* Ultra2 only */ + field PCIERRSTAT 0x40 /* PCI only */ + field MPARERR 0x20 /* PCI only */ + field DPARERR 0x10 /* PCI only */ + field SQPARERR 0x08 + field ILLOPCODE 0x04 + field ILLSADDR 0x02 + field ILLHADDR 0x01 +} + +/* + * Clear Interrupt Status (p. 3-52) + */ +register CLRINT { + address 0x092 + access_mode WO + count 24 + field CLRPARERR 0x10 /* PCI only */ + field CLRBRKADRINT 0x08 + field CLRSCSIINT 0x04 + field CLRCMDINT 0x02 + field CLRSEQINT 0x01 + dont_generate_debug_code +} + +register DFCNTRL { + address 0x093 + access_mode RW + field PRELOADEN 0x80 /* aic7890 only */ + field WIDEODD 0x40 + field SCSIEN 0x20 + field SDMAEN 0x10 + field SDMAENACK 0x10 + field HDMAEN 0x08 + field HDMAENACK 0x08 + field DIRECTION 0x04 + field FIFOFLUSH 0x02 + field FIFORESET 0x01 +} + +register DFSTATUS { + address 0x094 + access_mode RO + field PRELOAD_AVAIL 0x80 + field DFCACHETH 0x40 + field FIFOQWDEMP 0x20 + field MREQPEND 0x10 + field HDONE 0x08 + field DFTHRESH 0x04 + field FIFOFULL 0x02 + field FIFOEMP 0x01 +} + +register DFWADDR { + address 0x95 + access_mode RW + dont_generate_debug_code +} + +register DFRADDR { + address 0x97 + access_mode RW +} + +register DFDAT { + address 0x099 + access_mode RW + dont_generate_debug_code +} + +/* + * SCB Auto Increment (p. 3-59) + * Byte offset into the SCB Array and an optional bit to allow auto + * incrementing of the address during download and upload operations + */ +register SCBCNT { + address 0x09a + access_mode RW + count 1 + field SCBAUTO 0x80 + mask SCBCNT_MASK 0x1f + dont_generate_debug_code +} + +/* + * Queue In FIFO (p. 3-60) + * Input queue for queued SCBs (commands that the seqencer has yet to start) + */ +register QINFIFO { + address 0x09b + access_mode RW + count 12 + dont_generate_debug_code +} + +/* + * Queue In Count (p. 3-60) + * Number of queued SCBs + */ +register QINCNT { + address 0x09c + access_mode RO +} + +/* + * Queue Out FIFO (p. 3-61) + * Queue of SCBs that have completed and await the host + */ +register QOUTFIFO { + address 0x09d + access_mode WO + count 7 + dont_generate_debug_code +} + +register CRCCONTROL1 { + address 0x09d + access_mode RW + count 3 + field CRCONSEEN 0x80 + field CRCVALCHKEN 0x40 + field CRCENDCHKEN 0x20 + field CRCREQCHKEN 0x10 + field TARGCRCENDEN 0x08 + field TARGCRCCNTEN 0x04 + dont_generate_debug_code +} + + +/* + * Queue Out Count (p. 3-61) + * Number of queued SCBs in the Out FIFO + */ +register QOUTCNT { + address 0x09e + access_mode RO +} + +register SCSIPHASE { + address 0x09e + access_mode RO + field STATUS_PHASE 0x20 + field COMMAND_PHASE 0x10 + field MSG_IN_PHASE 0x08 + field MSG_OUT_PHASE 0x04 + field DATA_IN_PHASE 0x02 + field DATA_OUT_PHASE 0x01 + mask DATA_PHASE_MASK 0x03 +} + +/* + * Special Function + */ +register SFUNCT { + address 0x09f + access_mode RW + count 4 + field ALT_MODE 0x80 + dont_generate_debug_code +} + +/* + * SCB Definition (p. 5-4) + */ +scb { + address 0x0a0 + size 64 + + SCB_CDB_PTR { + size 4 + alias SCB_RESIDUAL_DATACNT + alias SCB_CDB_STORE + dont_generate_debug_code + } + SCB_RESIDUAL_SGPTR { + size 4 + dont_generate_debug_code + } + SCB_SCSI_STATUS { + size 1 + dont_generate_debug_code + } + SCB_TARGET_PHASES { + size 1 + dont_generate_debug_code + } + SCB_TARGET_DATA_DIR { + size 1 + dont_generate_debug_code + } + SCB_TARGET_ITAG { + size 1 + dont_generate_debug_code + } + SCB_DATAPTR { + size 4 + dont_generate_debug_code + } + SCB_DATACNT { + /* + * The last byte is really the high address bits for + * the data address. + */ + size 4 + field SG_LAST_SEG 0x80 /* In the fourth byte */ + mask SG_HIGH_ADDR_BITS 0x7F /* In the fourth byte */ + dont_generate_debug_code + } + SCB_SGPTR { + size 4 + field SG_RESID_VALID 0x04 /* In the first byte */ + field SG_FULL_RESID 0x02 /* In the first byte */ + field SG_LIST_NULL 0x01 /* In the first byte */ + dont_generate_debug_code + } + SCB_CONTROL { + size 1 + field TARGET_SCB 0x80 + field STATUS_RCVD 0x80 + field DISCENB 0x40 + field TAG_ENB 0x20 + field MK_MESSAGE 0x10 + field ULTRAENB 0x08 + field DISCONNECTED 0x04 + mask SCB_TAG_TYPE 0x03 + } + SCB_SCSIID { + size 1 + field TWIN_CHNLB 0x80 + mask TWIN_TID 0x70 + mask TID 0xf0 + mask OID 0x0f + } + SCB_LUN { + field SCB_XFERLEN_ODD 0x80 + mask LID 0x3f + size 1 + } + SCB_TAG { + size 1 + } + SCB_CDB_LEN { + size 1 + dont_generate_debug_code + } + SCB_SCSIRATE { + size 1 + dont_generate_debug_code + } + SCB_SCSIOFFSET { + size 1 + count 1 + dont_generate_debug_code + } + SCB_NEXT { + size 1 + dont_generate_debug_code + } + SCB_64_SPARE { + size 16 + } + SCB_64_BTT { + size 16 + dont_generate_debug_code + } +} + +const SCB_UPLOAD_SIZE 32 +const SCB_DOWNLOAD_SIZE 32 +const SCB_DOWNLOAD_SIZE_64 48 + +const SG_SIZEOF 0x08 /* sizeof(struct ahc_dma) */ + +/* --------------------- AHA-2840-only definitions -------------------- */ + +register SEECTL_2840 { + address 0x0c0 + access_mode RW + count 2 + field CS_2840 0x04 + field CK_2840 0x02 + field DO_2840 0x01 + dont_generate_debug_code +} + +register STATUS_2840 { + address 0x0c1 + access_mode RW + count 4 + field EEPROM_TF 0x80 + mask BIOS_SEL 0x60 + mask ADSEL 0x1e + field DI_2840 0x01 + dont_generate_debug_code +} + +/* --------------------- AIC-7870-only definitions -------------------- */ + +register CCHADDR { + address 0x0E0 + size 8 + dont_generate_debug_code +} + +register CCHCNT { + address 0x0E8 + dont_generate_debug_code +} + +register CCSGRAM { + address 0x0E9 + dont_generate_debug_code +} + +register CCSGADDR { + address 0x0EA + dont_generate_debug_code +} + +register CCSGCTL { + address 0x0EB + field CCSGDONE 0x80 + field CCSGEN 0x08 + field SG_FETCH_NEEDED 0x02 /* Bit used for software state */ + field CCSGRESET 0x01 + dont_generate_debug_code +} + +register CCSCBCNT { + address 0xEF + count 1 + dont_generate_debug_code +} + +register CCSCBCTL { + address 0x0EE + field CCSCBDONE 0x80 + field ARRDONE 0x40 /* SCB Array prefetch done */ + field CCARREN 0x10 + field CCSCBEN 0x08 + field CCSCBDIR 0x04 + field CCSCBRESET 0x01 + dont_generate_debug_code +} + +register CCSCBADDR { + address 0x0ED + dont_generate_debug_code +} + +register CCSCBRAM { + address 0xEC + dont_generate_debug_code +} + +/* + * SCB bank address (7895/7896/97 only) + */ +register SCBBADDR { + address 0x0F0 + access_mode RW + count 3 + dont_generate_debug_code +} + +register CCSCBPTR { + address 0x0F1 + dont_generate_debug_code +} + +register HNSCB_QOFF { + address 0x0F4 + count 4 + dont_generate_debug_code +} + +register SNSCB_QOFF { + address 0x0F6 + dont_generate_debug_code +} + +register SDSCB_QOFF { + address 0x0F8 + dont_generate_debug_code +} + +register QOFF_CTLSTA { + address 0x0FA + field SCB_AVAIL 0x40 + field SNSCB_ROLLOVER 0x20 + field SDSCB_ROLLOVER 0x10 + mask SCB_QSIZE 0x07 + mask SCB_QSIZE_256 0x06 + dont_generate_debug_code +} + +register DFF_THRSH { + address 0x0FB + mask WR_DFTHRSH 0x70 + mask RD_DFTHRSH 0x07 + mask RD_DFTHRSH_MIN 0x00 + mask RD_DFTHRSH_25 0x01 + mask RD_DFTHRSH_50 0x02 + mask RD_DFTHRSH_63 0x03 + mask RD_DFTHRSH_75 0x04 + mask RD_DFTHRSH_85 0x05 + mask RD_DFTHRSH_90 0x06 + mask RD_DFTHRSH_MAX 0x07 + mask WR_DFTHRSH_MIN 0x00 + mask WR_DFTHRSH_25 0x10 + mask WR_DFTHRSH_50 0x20 + mask WR_DFTHRSH_63 0x30 + mask WR_DFTHRSH_75 0x40 + mask WR_DFTHRSH_85 0x50 + mask WR_DFTHRSH_90 0x60 + mask WR_DFTHRSH_MAX 0x70 + count 4 + dont_generate_debug_code +} + +register SG_CACHE_PRE { + access_mode WO + address 0x0fc + mask SG_ADDR_MASK 0xf8 + field LAST_SEG 0x02 + field LAST_SEG_DONE 0x01 + dont_generate_debug_code +} + +register SG_CACHE_SHADOW { + access_mode RO + address 0x0fc + mask SG_ADDR_MASK 0xf8 + field LAST_SEG 0x02 + field LAST_SEG_DONE 0x01 + dont_generate_debug_code +} +/* ---------------------- Scratch RAM Offsets ------------------------- */ +/* These offsets are either to values that are initialized by the board's + * BIOS or are specified by the sequencer code. + * + * The host adapter card (at least the BIOS) uses 20-2f for SCSI + * device information, 32-33 and 5a-5f as well. As it turns out, the + * BIOS trashes 20-2f, writing the synchronous negotiation results + * on top of the BIOS values, so we re-use those for our per-target + * scratchspace (actually a value that can be copied directly into + * SCSIRATE). The kernel driver will enable synchronous negotiation + * for all targets that have a value other than 0 in the lower four + * bits of the target scratch space. This should work regardless of + * whether the bios has been installed. + */ + +scratch_ram { + address 0x020 + size 58 + + /* + * 1 byte per target starting at this address for configuration values + */ + BUSY_TARGETS { + alias TARG_SCSIRATE + size 16 + dont_generate_debug_code + } + /* + * Bit vector of targets that have ULTRA enabled as set by + * the BIOS. The Sequencer relies on a per-SCB field to + * control whether to enable Ultra transfers or not. During + * initialization, we read this field and reuse it for 2 + * entries in the busy target table. + */ + ULTRA_ENB { + alias CMDSIZE_TABLE + size 2 + count 2 + dont_generate_debug_code + } + /* + * Bit vector of targets that have disconnection disabled as set by + * the BIOS. The Sequencer relies in a per-SCB field to control the + * disconnect priveldge. During initialization, we read this field + * and reuse it for 2 entries in the busy target table. + */ + DISC_DSB { + size 2 + count 6 + dont_generate_debug_code + } + CMDSIZE_TABLE_TAIL { + size 4 + } + /* + * Partial transfer past cacheline end to be + * transferred using an extra S/G. + */ + MWI_RESIDUAL { + size 1 + dont_generate_debug_code + } + /* + * SCBID of the next SCB to be started by the controller. + */ + NEXT_QUEUED_SCB { + size 1 + dont_generate_debug_code + } + /* + * Single byte buffer used to designate the type or message + * to send to a target. + */ + MSG_OUT { + size 1 + dont_generate_debug_code + } + /* Parameters for DMA Logic */ + DMAPARAMS { + size 1 + count 12 + field PRELOADEN 0x80 + field WIDEODD 0x40 + field SCSIEN 0x20 + field SDMAEN 0x10 + field SDMAENACK 0x10 + field HDMAEN 0x08 + field HDMAENACK 0x08 + field DIRECTION 0x04 /* Set indicates PCI->SCSI */ + field FIFOFLUSH 0x02 + field FIFORESET 0x01 + dont_generate_debug_code + } + SEQ_FLAGS { + size 1 + field NOT_IDENTIFIED 0x80 + field NO_CDB_SENT 0x40 + field TARGET_CMD_IS_TAGGED 0x40 + field DPHASE 0x20 + /* Target flags */ + field TARG_CMD_PENDING 0x10 + field CMDPHASE_PENDING 0x08 + field DPHASE_PENDING 0x04 + field SPHASE_PENDING 0x02 + field NO_DISCONNECT 0x01 + } + /* + * Temporary storage for the + * target/channel/lun of a + * reconnecting target + */ + SAVED_SCSIID { + size 1 + dont_generate_debug_code + } + SAVED_LUN { + size 1 + dont_generate_debug_code + } + /* + * The last bus phase as seen by the sequencer. + */ + LASTPHASE { + size 1 + field CDI 0x80 + field IOI 0x40 + field MSGI 0x20 + mask PHASE_MASK CDI|IOI|MSGI + mask P_DATAOUT 0x00 + mask P_DATAIN IOI + mask P_COMMAND CDI + mask P_MESGOUT CDI|MSGI + mask P_STATUS CDI|IOI + mask P_MESGIN CDI|IOI|MSGI + mask P_BUSFREE 0x01 + } + /* + * head of list of SCBs awaiting + * selection + */ + WAITING_SCBH { + size 1 + dont_generate_debug_code + } + /* + * head of list of SCBs that are + * disconnected. Used for SCB + * paging. + */ + DISCONNECTED_SCBH { + size 1 + dont_generate_debug_code + } + /* + * head of list of SCBs that are + * not in use. Used for SCB paging. + */ + FREE_SCBH { + size 1 + dont_generate_debug_code + } + /* + * head of list of SCBs that have + * completed but have not been + * put into the qoutfifo. + */ + COMPLETE_SCBH { + size 1 + } + /* + * Address of the hardware scb array in the host. + */ + HSCB_ADDR { + size 4 + dont_generate_debug_code + } + /* + * Base address of our shared data with the kernel driver in host + * memory. This includes the qoutfifo and target mode + * incoming command queue. + */ + SHARED_DATA_ADDR { + size 4 + dont_generate_debug_code + } + KERNEL_QINPOS { + size 1 + dont_generate_debug_code + } + QINPOS { + size 1 + dont_generate_debug_code + } + QOUTPOS { + size 1 + dont_generate_debug_code + } + /* + * Kernel and sequencer offsets into the queue of + * incoming target mode command descriptors. The + * queue is full when the KERNEL_TQINPOS == TQINPOS. + */ + KERNEL_TQINPOS { + size 1 + dont_generate_debug_code + } + TQINPOS { + size 1 + dont_generate_debug_code + } + ARG_1 { + size 1 + count 1 + mask SEND_MSG 0x80 + mask SEND_SENSE 0x40 + mask SEND_REJ 0x20 + mask MSGOUT_PHASEMIS 0x10 + mask EXIT_MSG_LOOP 0x08 + mask CONT_MSG_LOOP 0x04 + mask CONT_TARG_SESSION 0x02 + alias RETURN_1 + dont_generate_debug_code + } + ARG_2 { + size 1 + alias RETURN_2 + dont_generate_debug_code + } + + /* + * Snapshot of MSG_OUT taken after each message is sent. + */ + LAST_MSG { + size 1 + alias TARG_IMMEDIATE_SCB + dont_generate_debug_code + } + + /* + * Sequences the kernel driver has okayed for us. This allows + * the driver to do things like prevent initiator or target + * operations. + */ + SCSISEQ_TEMPLATE { + size 1 + field ENSELO 0x40 + field ENSELI 0x20 + field ENRSELI 0x10 + field ENAUTOATNO 0x08 + field ENAUTOATNI 0x04 + field ENAUTOATNP 0x02 + dont_generate_debug_code + } +} + +scratch_ram { + address 0x056 + size 4 + /* + * These scratch ram locations are initialized by the 274X BIOS. + * We reuse them after capturing the BIOS settings during + * initialization. + */ + + /* + * The initiator specified tag for this target mode transaction. + */ + HA_274_BIOSGLOBAL { + size 1 + field HA_274_EXTENDED_TRANS 0x01 + alias INITIATOR_TAG + count 1 + dont_generate_debug_code + } + + SEQ_FLAGS2 { + size 1 + field SCB_DMA 0x01 + field TARGET_MSG_PENDING 0x02 + dont_generate_debug_code + } +} + +scratch_ram { + address 0x05a + size 6 + /* + * These are reserved registers in the card's scratch ram on the 2742. + * The EISA configuration chip is mapped here. On Rev E. of the + * aic7770, the sequencer can use this area for scratch, but the + * host cannot directly access these registers. On later chips, this + * area can be read and written by both the host and the sequencer. + * Even on later chips, many of these locations are initialized by + * the BIOS. + */ + SCSICONF { + size 1 + count 12 + field TERM_ENB 0x80 + field RESET_SCSI 0x40 + field ENSPCHK 0x20 + mask HSCSIID 0x07 /* our SCSI ID */ + mask HWSCSIID 0x0f /* our SCSI ID if Wide Bus */ + dont_generate_debug_code + } + INTDEF { + address 0x05c + size 1 + count 1 + field EDGE_TRIG 0x80 + mask VECTOR 0x0f + dont_generate_debug_code + } + HOSTCONF { + address 0x05d + size 1 + count 1 + dont_generate_debug_code + } + HA_274_BIOSCTRL { + address 0x05f + size 1 + count 1 + mask BIOSMODE 0x30 + mask BIOSDISABLED 0x30 + field CHANNEL_B_PRIMARY 0x08 + dont_generate_debug_code + } +} + +scratch_ram { + address 0x070 + size 16 + + /* + * Per target SCSI offset values for Ultra2 controllers. + */ + TARG_OFFSET { + size 16 + count 1 + dont_generate_debug_code + } +} + +const TID_SHIFT 4 +const SCB_LIST_NULL 0xff +const TARGET_CMD_CMPLT 0xfe + +const CCSGADDR_MAX 0x80 +const CCSGRAM_MAXSEGS 16 + +/* WDTR Message values */ +const BUS_8_BIT 0x00 +const BUS_16_BIT 0x01 +const BUS_32_BIT 0x02 + +/* Offset maximums */ +const MAX_OFFSET_8BIT 0x0f +const MAX_OFFSET_16BIT 0x08 +const MAX_OFFSET_ULTRA2 0x7f +const MAX_OFFSET 0x7f +const HOST_MSG 0xff + +/* Target mode command processing constants */ +const CMD_GROUP_CODE_SHIFT 0x05 + +const STATUS_BUSY 0x08 +const STATUS_QUEUE_FULL 0x28 +const TARGET_DATA_IN 1 + +/* + * Downloaded (kernel inserted) constants + */ +/* Offsets into the SCBID array where different data is stored */ +const QOUTFIFO_OFFSET download +const QINFIFO_OFFSET download +const CACHESIZE_MASK download +const INVERTED_CACHESIZE_MASK download +const SG_PREFETCH_CNT download +const SG_PREFETCH_ALIGN_MASK download +const SG_PREFETCH_ADDR_MASK download |